zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

✨ M282 - Detach Servo (#22760)

Browse source
This commit is contained in:
Dakkaron 2021-09-15 02:00:48 +02:00 committed by Scott Lahteine
parent 224371dfc6
commit 1386e78369
11 changed files with 76 additions and 14 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

5
Marlin/Configuration.h
View file

@ -2936,7 +2936,7 @@
* Set this manually if there are extra servos needing manual control.
* Set to 0 to turn off servo support.
*/
//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
//#define NUM_SERVOS 3 // Note: Servo index starts with 0 for M280-M282 commands
// (ms) Delay before the next move will start, to give the servo time to reach its target angle.
// 300ms is a good value but you can try less delay.
@ -2948,3 +2948,6 @@
// Edit servo angles with M281 and save to EEPROM with M500
//#define EDITABLE_SERVO_ANGLES
// Disable servo with M282 to reduce power consumption, noise, and heat when not in use
//#define SERVO_DETACH_GCODE

2
Marlin/src/gcode/control/M280.cpp
View file

@ -39,7 +39,7 @@ void GcodeSuite::M280() {
if (parser.seen('S')) {
const int a = parser.value_int();
if (a == -1)
servo[servo_index].detach();
DETACH_SERVO(servo_index);
else
MOVE_SERVO(servo_index, a);
}

45
Marlin/src/gcode/control/M282.cpp Normal file
View file

@ -0,0 +1,45 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../inc/MarlinConfig.h"
#if ENABLED(SERVO_DETACH_GCODE)
#include "../gcode.h"
#include "../../module/servo.h"
/**
* M282: Detach Servo. P<index>
*/
void GcodeSuite::M282() {
if (!parser.seen('P')) return;
const int servo_index = parser.value_int();
if (WITHIN(servo_index, 0, NUM_SERVOS - 1))
DETACH_SERVO(servo_index);
else
SERIAL_ECHO_MSG("Servo ", servo_index, " out of range");
}
#endif // SERVO_DETACH_GCODE

3
Marlin/src/gcode/gcode.cpp
View file

@ -717,6 +717,9 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
#if ENABLED(EDITABLE_SERVO_ANGLES)
case 281: M281(); break; // M281: Set servo angles
#endif
#if ENABLED(SERVO_DETACH_GCODE)
case 282: M282(); break; // M282: Detach servo
#endif
#endif
#if ENABLED(BABYSTEPPING)

4
Marlin/src/gcode/gcode.h
View file

@ -192,6 +192,7 @@
* M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
* M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
* M281 - Set servo min|max position: "M281 P<index> L<min> U<max>". (Requires EDITABLE_SERVO_ANGLES)
* M282 - Detach servo: "M282 P<index>". (Requires SERVO_DETACH_GCODE)
* M290 - Babystepping (Requires BABYSTEPPING)
* M300 - Play beep sound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D. (Requires PIDTEMP)
@ -862,6 +863,9 @@ private:
static void M281();
static void M281_report(const bool forReplay=true);
#endif
#if ENABLED(SERVO_DETACH_GCODE)
static void M282();
#endif
#endif
#if ENABLED(BABYSTEPPING)

9
Marlin/src/inc/Conditionals_post.h
View file

@ -2593,10 +2593,15 @@
#endif
#if NUM_SERVOS > 0
#define HAS_SERVOS 1
#endif
#if HAS_SERVOS && defined(PAUSE_SERVO_OUTPUT) && defined(RESUME_SERVO_OUTPUT)
#if defined(PAUSE_SERVO_OUTPUT) && defined(RESUME_SERVO_OUTPUT)
#define HAS_PAUSE_SERVO_OUTPUT 1
#endif
#else
#undef SERVO_DELAY
#undef DEACTIVATE_SERVOS_AFTER_MOVE
#undef EDITABLE_SERVO_ANGLES
#undef SERVO_DETACH_GCODE
#endif
// Sensors
#if PIN_EXISTS(FILWIDTH)

8
Marlin/src/module/servo.cpp
View file

@ -39,19 +39,19 @@ HAL_SERVO_LIB servo[NUM_SERVOS];
void servo_init() {
#if NUM_SERVOS >= 1 && HAS_SERVO_0
servo[0].attach(SERVO0_PIN);
servo[0].detach(); // Just set up the pin. We don't have a position yet. Don't move to a random position.
DETACH_SERVO(0); // Just set up the pin. We don't have a position yet. Don't move to a random position.
#endif
#if NUM_SERVOS >= 2 && HAS_SERVO_1
servo[1].attach(SERVO1_PIN);
servo[1].detach();
DETACH_SERVO(1);
#endif
#if NUM_SERVOS >= 3 && HAS_SERVO_2
servo[2].attach(SERVO2_PIN);
servo[2].detach();
DETACH_SERVO(2);
#endif
#if NUM_SERVOS >= 4 && HAS_SERVO_3
servo[3].attach(SERVO3_PIN);
servo[3].detach();
DETACH_SERVO(3);
#endif
}

1
Marlin/src/module/servo.h
View file

@ -110,6 +110,7 @@
#endif // HAS_SERVO_ANGLES
#define MOVE_SERVO(I, P) servo[I].move(P)
#define DETACH_SERVO(I) servo[I].detach()
extern HAL_SERVO_LIB servo[NUM_SERVOS];
void servo_init();

3
buildroot/tests/LPC1768
View file

@ -28,7 +28,8 @@ restore_configs
opt_set MOTHERBOARD BOARD_MKS_SBASE \
EXTRUDERS 2 TEMP_SENSOR_1 1 \
NUM_SERVOS 2 SERVO_DELAY '{ 300, 300 }'
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR ULTIMAKERCONTROLLER REALTIME_REPORTING_COMMANDS FULL_REPORT_TO_HOST_FEATURE
opt_enable SWITCHING_NOZZLE SWITCHING_NOZZLE_E1_SERVO_NR EDITABLE_SERVO_ANGLES SERVO_DETACH_GCODE \
ULTIMAKERCONTROLLER REALTIME_REPORTING_COMMANDS FULL_REPORT_TO_HOST_FEATURE
exec_test $1 $2 "MKS SBASE with SWITCHING_NOZZLE, Grbl Realtime Report" "$3"
restore_configs

1
ini/features.ini
View file

@ -173,6 +173,7 @@ HAS_SMART_EFF_MOD = src_filter=+<src/gcode/config/M672.cpp>
COOLANT_CONTROL|AIR_ASSIST = src_filter=+<src/gcode/control/M7-M9.cpp>
AIR_EVACUATION = src_filter=+<src/gcode/control/M10-M11.cpp>
HAS_SOFTWARE_ENDSTOPS = src_filter=+<src/gcode/control/M211.cpp>
SERVO_DETACH_GCODE = src_filter=+<src/gcode/control/M282.cpp>
HAS_DUPLICATION_MODE = src_filter=+<src/gcode/control/M605.cpp>
LIN_ADVANCE = src_filter=+<src/gcode/feature/advance>
PHOTO_GCODE = src_filter=+<src/gcode/feature/camera>

5
platformio.ini
View file

@ -87,7 +87,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/lcd/touch/touch_buttons.cpp>
-<src/sd/usb_flashdrive/lib-uhs2> -<src/sd/usb_flashdrive/lib-uhs3>
-<src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp>
-<src/sd/cardreader.cpp> -<src/sd/Sd2Card.cpp> -<src/sd/SdBaseFile.cpp> -<src/sd/SdFatUtil.cpp> -<src/sd/SdFile.cpp> -<src/sd/SdVolume.cpp> -<src/gcode/sd>
-<src/sd/cardreader.cpp> -<src/sd/Sd2Card.cpp> -<src/sd/SdBaseFile.cpp> -<src/sd/SdFatUtil.cpp> -<src/sd/SdFile.cpp> -<src/sd/SdVolume.cpp>
-<src/HAL/shared/backtrace>
-<src/HAL/shared/cpu_exception>
-<src/HAL/shared/eeprom_if_i2c.cpp>
@ -166,7 +166,6 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/gcode/config/M217.cpp>
-<src/gcode/config/M218.cpp>
-<src/gcode/config/M221.cpp>
-<src/gcode/config/M281.cpp>
-<src/gcode/config/M301.cpp>
-<src/gcode/config/M302.cpp>
-<src/gcode/config/M304.cpp>
@ -243,7 +242,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
-<src/module/printcounter.cpp>
-<src/module/probe.cpp>
-<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
-<src/module/servo.cpp> -<src/gcode/control/M280.cpp>
-<src/module/servo.cpp> -<src/gcode/control/M280.cpp> -<src/gcode/config/M281.cpp> -<src/gcode/control/M282.cpp>
-<src/module/stepper/TMC26X.cpp>
#