From dad7691df92dc97c00c67a8af4d3fa31fbac4916 Mon Sep 17 00:00:00 2001 From: Yuri Valentini Date: Mon, 7 Jan 2013 11:08:10 +0100 Subject: [PATCH 1/3] makefile for sanguino standalone compilation --- Marlin/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Marlin/Makefile b/Marlin/Makefile index c5b8ffbd05..5e271db4a8 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -190,8 +190,8 @@ TARGET = $(notdir $(CURDIR)) VPATH = . VPATH += $(BUILD_DIR) VPATH += $(HARDWARE_SRC) -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal -VPATH += $(ARDUINO_INSTALL_DIR)/libraries/SPI +VPATH += ../ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal +VPATH += ../ArduinoAddons/Arduino_0.xx/libraries/SPI ifeq ($(HARDWARE_VARIANT), arduino) HARDWARE_SUB_VARIANT ?= mega VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/$(HARDWARE_SUB_VARIANT) From 7d20ec706e989d31b234852d4e4d686c3ca92714 Mon Sep 17 00:00:00 2001 From: Yuri Valentini Date: Mon, 7 Jan 2013 17:26:50 +0100 Subject: [PATCH 2/3] Added libraries from Arduino 1.0.3 for sanguino build --- .../libraries/LiquidCrystal/LiquidCrystal.cpp | 309 +++++ .../libraries/LiquidCrystal/LiquidCrystal.h | 104 ++ .../libraries/LiquidCrystal/keywords.txt | 37 + .../Arduino_0.xx/libraries/SPI/SPI.cpp | 61 + .../Arduino_0.xx/libraries/SPI/SPI.h | 70 ++ .../Arduino_0.xx/libraries/SPI/keywords.txt | 36 + .../libraries/LiquidCrystal/LiquidCrystal.cpp | 310 +++++ .../libraries/LiquidCrystal/LiquidCrystal.h | 106 ++ .../libraries/LiquidCrystal/keywords.txt | 37 + .../Arduino_1.x.x/libraries/SPI/SPI.cpp | 66 + .../Arduino_1.x.x/libraries/SPI/SPI.h | 70 ++ .../Arduino_1.x.x/libraries/SPI/keywords.txt | 36 + .../Arduino_1.x.x/sanguino/boards.txt | 63 + .../bootloaders/atmega/ATmegaBOOT_168.c | 1071 +++++++++++++++++ .../atmega/ATmegaBOOT_168_atmega1284p.hex | 130 ++ .../atmega/ATmegaBOOT_168_atmega1284p_8m.hex | 130 ++ .../atmega/ATmegaBOOT_168_atmega644p.hex | 126 ++ .../sanguino/bootloaders/atmega/Makefile | 254 ++++ .../bootloaders/atmega644p/ATmegaBOOT.c | 717 +++++++++++ .../bootloaders/atmega644p/ATmegaBOOT.c.tst | 388 ++++++ .../atmega644p/ATmegaBOOT_644P.elf | Bin 0 -> 13832 bytes .../atmega644p/ATmegaBOOT_644P.hex | 110 ++ .../sanguino/bootloaders/atmega644p/Makefile | 56 + .../bootloaders/atmega644p/README.txt | 3 + .../sanguino/cores/arduino/Arduino.h | 215 ++++ .../sanguino/cores/arduino/CDC.cpp | 239 ++++ .../sanguino/cores/arduino/Client.h | 26 + .../sanguino/cores/arduino/HID.cpp | 520 ++++++++ .../sanguino/cores/arduino/HardwareSerial.cpp | 519 ++++++++ .../sanguino/cores/arduino/HardwareSerial.h | 115 ++ .../sanguino/cores/arduino/IPAddress.cpp | 56 + .../sanguino/cores/arduino/IPAddress.h | 76 ++ .../sanguino/cores/arduino/Platform.h | 23 + .../sanguino/cores/arduino/Print.cpp | 268 +++++ .../sanguino/cores/arduino/Print.h | 81 ++ .../sanguino/cores/arduino/Printable.h | 40 + .../sanguino/cores/arduino/Server.h | 9 + .../sanguino/cores/arduino/Stream.cpp | 270 +++++ .../sanguino/cores/arduino/Stream.h | 96 ++ .../sanguino/cores/arduino/Tone.cpp | 616 ++++++++++ .../sanguino/cores/arduino/USBAPI.h | 196 +++ .../sanguino/cores/arduino/USBCore.cpp | 684 +++++++++++ .../sanguino/cores/arduino/USBCore.h | 303 +++++ .../sanguino/cores/arduino/USBDesc.h | 63 + .../sanguino/cores/arduino/Udp.h | 88 ++ .../sanguino/cores/arduino/WCharacter.h | 168 +++ .../sanguino/cores/arduino/WInterrupts.c | 322 +++++ .../sanguino/cores/arduino/WMath.cpp | 60 + .../sanguino/cores/arduino/WString.cpp | 645 ++++++++++ .../sanguino/cores/arduino/WString.h | 205 ++++ .../sanguino/cores/arduino/binary.h | 515 ++++++++ .../sanguino/cores/arduino/main.cpp | 20 + .../sanguino/cores/arduino/new.cpp | 18 + .../sanguino/cores/arduino/new.h | 22 + .../sanguino/cores/arduino/wiring.c | 324 +++++ .../sanguino/cores/arduino/wiring_analog.c | 282 +++++ .../sanguino/cores/arduino/wiring_digital.c | 178 +++ .../sanguino/cores/arduino/wiring_private.h | 71 ++ .../sanguino/cores/arduino/wiring_pulse.c | 69 ++ .../sanguino/cores/arduino/wiring_shift.c | 55 + .../sanguino/variants/standard/pins_arduino.h | 285 +++++ Marlin/Makefile | 15 +- Marlin/Marlin.h | 2 +- 63 files changed, 12042 insertions(+), 7 deletions(-) create mode 100644 ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.cpp create mode 100644 ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.h create mode 100644 ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/keywords.txt create mode 100644 ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.cpp create mode 100644 ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.h create mode 100644 ArduinoAddons/Arduino_0.xx/libraries/SPI/keywords.txt create mode 100644 ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.h create mode 100644 ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/keywords.txt create mode 100644 ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.h create mode 100644 ArduinoAddons/Arduino_1.x.x/libraries/SPI/keywords.txt create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/boards.txt create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p.hex create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p_8m.hex create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega644p.hex create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/Makefile create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c.tst create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT_644P.elf create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT_644P.hex create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/Makefile create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/README.txt create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Arduino.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/CDC.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Client.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HID.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Platform.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Printable.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Server.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Tone.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBAPI.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBCore.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBCore.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBDesc.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Udp.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WCharacter.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WInterrupts.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WMath.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/binary.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/main.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.cpp create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_analog.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_digital.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_private.h create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_pulse.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_shift.c create mode 100644 ArduinoAddons/Arduino_1.x.x/sanguino/variants/standard/pins_arduino.h diff --git a/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.cpp b/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.cpp new file mode 100644 index 0000000000..23713f47b9 --- /dev/null +++ b/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.cpp @@ -0,0 +1,309 @@ +#include "LiquidCrystal.h" + +#include +#include +#include +#include "WProgram.h" + +// When the display powers up, it is configured as follows: +// +// 1. Display clear +// 2. Function set: +// DL = 1; 8-bit interface data +// N = 0; 1-line display +// F = 0; 5x8 dot character font +// 3. Display on/off control: +// D = 0; Display off +// C = 0; Cursor off +// B = 0; Blinking off +// 4. Entry mode set: +// I/D = 1; Increment by 1 +// S = 0; No shift +// +// Note, however, that resetting the Arduino doesn't reset the LCD, so we +// can't assume that its in that state when a sketch starts (and the +// LiquidCrystal constructor is called). + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) +{ + init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7); +} + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) +{ + init(0, rs, 255, enable, d0, d1, d2, d3, d4, d5, d6, d7); +} + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3) +{ + init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0); +} + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3) +{ + init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0); +} + +void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) +{ + _rs_pin = rs; + _rw_pin = rw; + _enable_pin = enable; + + _data_pins[0] = d0; + _data_pins[1] = d1; + _data_pins[2] = d2; + _data_pins[3] = d3; + _data_pins[4] = d4; + _data_pins[5] = d5; + _data_pins[6] = d6; + _data_pins[7] = d7; + + pinMode(_rs_pin, OUTPUT); + // we can save 1 pin by not using RW. Indicate by passing 255 instead of pin# + if (_rw_pin != 255) { + pinMode(_rw_pin, OUTPUT); + } + pinMode(_enable_pin, OUTPUT); + + if (fourbitmode) + _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS; + else + _displayfunction = LCD_8BITMODE | LCD_1LINE | LCD_5x8DOTS; + + begin(16, 1); +} + +void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { + if (lines > 1) { + _displayfunction |= LCD_2LINE; + } + _numlines = lines; + _currline = 0; + + // for some 1 line displays you can select a 10 pixel high font + if ((dotsize != 0) && (lines == 1)) { + _displayfunction |= LCD_5x10DOTS; + } + + // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION! + // according to datasheet, we need at least 40ms after power rises above 2.7V + // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50 + delayMicroseconds(50000); + // Now we pull both RS and R/W low to begin commands + digitalWrite(_rs_pin, LOW); + digitalWrite(_enable_pin, LOW); + if (_rw_pin != 255) { + digitalWrite(_rw_pin, LOW); + } + + //put the LCD into 4 bit or 8 bit mode + if (! (_displayfunction & LCD_8BITMODE)) { + // this is according to the hitachi HD44780 datasheet + // figure 24, pg 46 + + // we start in 8bit mode, try to set 4 bit mode + write4bits(0x03); + delayMicroseconds(4500); // wait min 4.1ms + + // second try + write4bits(0x03); + delayMicroseconds(4500); // wait min 4.1ms + + // third go! + write4bits(0x03); + delayMicroseconds(150); + + // finally, set to 4-bit interface + write4bits(0x02); + } else { + // this is according to the hitachi HD44780 datasheet + // page 45 figure 23 + + // Send function set command sequence + command(LCD_FUNCTIONSET | _displayfunction); + delayMicroseconds(4500); // wait more than 4.1ms + + // second try + command(LCD_FUNCTIONSET | _displayfunction); + delayMicroseconds(150); + + // third go + command(LCD_FUNCTIONSET | _displayfunction); + } + + // finally, set # lines, font size, etc. + command(LCD_FUNCTIONSET | _displayfunction); + + // turn the display on with no cursor or blinking default + _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF; + display(); + + // clear it off + clear(); + + // Initialize to default text direction (for romance languages) + _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT; + // set the entry mode + command(LCD_ENTRYMODESET | _displaymode); + +} + +/********** high level commands, for the user! */ +void LiquidCrystal::clear() +{ + command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero + delayMicroseconds(2000); // this command takes a long time! +} + +void LiquidCrystal::home() +{ + command(LCD_RETURNHOME); // set cursor position to zero + delayMicroseconds(2000); // this command takes a long time! +} + +void LiquidCrystal::setCursor(uint8_t col, uint8_t row) +{ + int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 }; + if ( row > _numlines ) { + row = _numlines-1; // we count rows starting w/0 + } + + command(LCD_SETDDRAMADDR | (col + row_offsets[row])); +} + +// Turn the display on/off (quickly) +void LiquidCrystal::noDisplay() { + _displaycontrol &= ~LCD_DISPLAYON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} +void LiquidCrystal::display() { + _displaycontrol |= LCD_DISPLAYON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} + +// Turns the underline cursor on/off +void LiquidCrystal::noCursor() { + _displaycontrol &= ~LCD_CURSORON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} +void LiquidCrystal::cursor() { + _displaycontrol |= LCD_CURSORON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} + +// Turn on and off the blinking cursor +void LiquidCrystal::noBlink() { + _displaycontrol &= ~LCD_BLINKON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} +void LiquidCrystal::blink() { + _displaycontrol |= LCD_BLINKON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} + +// These commands scroll the display without changing the RAM +void LiquidCrystal::scrollDisplayLeft(void) { + command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT); +} +void LiquidCrystal::scrollDisplayRight(void) { + command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT); +} + +// This is for text that flows Left to Right +void LiquidCrystal::leftToRight(void) { + _displaymode |= LCD_ENTRYLEFT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// This is for text that flows Right to Left +void LiquidCrystal::rightToLeft(void) { + _displaymode &= ~LCD_ENTRYLEFT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// This will 'right justify' text from the cursor +void LiquidCrystal::autoscroll(void) { + _displaymode |= LCD_ENTRYSHIFTINCREMENT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// This will 'left justify' text from the cursor +void LiquidCrystal::noAutoscroll(void) { + _displaymode &= ~LCD_ENTRYSHIFTINCREMENT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// Allows us to fill the first 8 CGRAM locations +// with custom characters +void LiquidCrystal::createChar(uint8_t location, uint8_t charmap[]) { + location &= 0x7; // we only have 8 locations 0-7 + command(LCD_SETCGRAMADDR | (location << 3)); + for (int i=0; i<8; i++) { + write(charmap[i]); + } +} + +/*********** mid level commands, for sending data/cmds */ + +inline void LiquidCrystal::command(uint8_t value) { + send(value, LOW); +} + +inline void LiquidCrystal::write(uint8_t value) { + send(value, HIGH); +} + +/************ low level data pushing commands **********/ + +// write either command or data, with automatic 4/8-bit selection +void LiquidCrystal::send(uint8_t value, uint8_t mode) { + digitalWrite(_rs_pin, mode); + + // if there is a RW pin indicated, set it low to Write + if (_rw_pin != 255) { + digitalWrite(_rw_pin, LOW); + } + + if (_displayfunction & LCD_8BITMODE) { + write8bits(value); + } else { + write4bits(value>>4); + write4bits(value); + } +} + +void LiquidCrystal::pulseEnable(void) { + digitalWrite(_enable_pin, LOW); + delayMicroseconds(1); + digitalWrite(_enable_pin, HIGH); + delayMicroseconds(1); // enable pulse must be >450ns + digitalWrite(_enable_pin, LOW); + delayMicroseconds(100); // commands need > 37us to settle +} + +void LiquidCrystal::write4bits(uint8_t value) { + for (int i = 0; i < 4; i++) { + pinMode(_data_pins[i], OUTPUT); + digitalWrite(_data_pins[i], (value >> i) & 0x01); + } + + pulseEnable(); +} + +void LiquidCrystal::write8bits(uint8_t value) { + for (int i = 0; i < 8; i++) { + pinMode(_data_pins[i], OUTPUT); + digitalWrite(_data_pins[i], (value >> i) & 0x01); + } + + pulseEnable(); +} diff --git a/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.h b/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.h new file mode 100644 index 0000000000..f66ec1b4ca --- /dev/null +++ b/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/LiquidCrystal.h @@ -0,0 +1,104 @@ +#ifndef LiquidCrystal_h +#define LiquidCrystal_h + +#include +#include "Print.h" + +// commands +#define LCD_CLEARDISPLAY 0x01 +#define LCD_RETURNHOME 0x02 +#define LCD_ENTRYMODESET 0x04 +#define LCD_DISPLAYCONTROL 0x08 +#define LCD_CURSORSHIFT 0x10 +#define LCD_FUNCTIONSET 0x20 +#define LCD_SETCGRAMADDR 0x40 +#define LCD_SETDDRAMADDR 0x80 + +// flags for display entry mode +#define LCD_ENTRYRIGHT 0x00 +#define LCD_ENTRYLEFT 0x02 +#define LCD_ENTRYSHIFTINCREMENT 0x01 +#define LCD_ENTRYSHIFTDECREMENT 0x00 + +// flags for display on/off control +#define LCD_DISPLAYON 0x04 +#define LCD_DISPLAYOFF 0x00 +#define LCD_CURSORON 0x02 +#define LCD_CURSOROFF 0x00 +#define LCD_BLINKON 0x01 +#define LCD_BLINKOFF 0x00 + +// flags for display/cursor shift +#define LCD_DISPLAYMOVE 0x08 +#define LCD_CURSORMOVE 0x00 +#define LCD_MOVERIGHT 0x04 +#define LCD_MOVELEFT 0x00 + +// flags for function set +#define LCD_8BITMODE 0x10 +#define LCD_4BITMODE 0x00 +#define LCD_2LINE 0x08 +#define LCD_1LINE 0x00 +#define LCD_5x10DOTS 0x04 +#define LCD_5x8DOTS 0x00 + +class LiquidCrystal : public Print { +public: + LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); + LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); + LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3); + LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3); + + void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); + + void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS); + + void clear(); + void home(); + + void noDisplay(); + void display(); + void noBlink(); + void blink(); + void noCursor(); + void cursor(); + void scrollDisplayLeft(); + void scrollDisplayRight(); + void leftToRight(); + void rightToLeft(); + void autoscroll(); + void noAutoscroll(); + + void createChar(uint8_t, uint8_t[]); + void setCursor(uint8_t, uint8_t); + virtual void write(uint8_t); + void command(uint8_t); +private: + void send(uint8_t, uint8_t); + void write4bits(uint8_t); + void write8bits(uint8_t); + void pulseEnable(); + + uint8_t _rs_pin; // LOW: command. HIGH: character. + uint8_t _rw_pin; // LOW: write to LCD. HIGH: read from LCD. + uint8_t _enable_pin; // activated by a HIGH pulse. + uint8_t _data_pins[8]; + + uint8_t _displayfunction; + uint8_t _displaycontrol; + uint8_t _displaymode; + + uint8_t _initialized; + + uint8_t _numlines,_currline; +}; + +#endif diff --git a/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/keywords.txt b/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/keywords.txt new file mode 100644 index 0000000000..132845cb65 --- /dev/null +++ b/ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal/keywords.txt @@ -0,0 +1,37 @@ +####################################### +# Syntax Coloring Map For LiquidCrystal +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +LiquidCrystal KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +clear KEYWORD2 +home KEYWORD2 +print KEYWORD2 +setCursor KEYWORD2 +cursor KEYWORD2 +noCursor KEYWORD2 +blink KEYWORD2 +noBlink KEYWORD2 +display KEYWORD2 +noDisplay KEYWORD2 +autoscroll KEYWORD2 +noAutoscroll KEYWORD2 +leftToRight KEYWORD2 +rightToLeft KEYWORD2 +scrollDisplayLeft KEYWORD2 +scrollDisplayRight KEYWORD2 +createChar KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.cpp b/ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.cpp new file mode 100644 index 0000000000..42915df1eb --- /dev/null +++ b/ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.cpp @@ -0,0 +1,61 @@ +/* + * Copyright (c) 2010 by Cristian Maglie + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#include "pins_arduino.h" +#include "SPI.h" + +SPIClass SPI; + +void SPIClass::begin() { + // Set direction register for SCK and MOSI pin. + // MISO pin automatically overrides to INPUT. + // When the SS pin is set as OUTPUT, it can be used as + // a general purpose output port (it doesn't influence + // SPI operations). + + pinMode(SCK, OUTPUT); + pinMode(MOSI, OUTPUT); + pinMode(SS, OUTPUT); + + digitalWrite(SCK, LOW); + digitalWrite(MOSI, LOW); + digitalWrite(SS, HIGH); + + // Warning: if the SS pin ever becomes a LOW INPUT then SPI + // automatically switches to Slave, so the data direction of + // the SS pin MUST be kept as OUTPUT. + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); +} + +void SPIClass::end() { + SPCR &= ~_BV(SPE); +} + +void SPIClass::setBitOrder(uint8_t bitOrder) +{ + if(bitOrder == LSBFIRST) { + SPCR |= _BV(DORD); + } else { + SPCR &= ~(_BV(DORD)); + } +} + +void SPIClass::setDataMode(uint8_t mode) +{ + SPCR = (SPCR & ~SPI_MODE_MASK) | mode; +} + +void SPIClass::setClockDivider(uint8_t rate) +{ + SPCR = (SPCR & ~SPI_CLOCK_MASK) | (rate & SPI_CLOCK_MASK); + SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((rate >> 2) & SPI_2XCLOCK_MASK); +} + diff --git a/ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.h b/ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.h new file mode 100644 index 0000000000..9d7c3c709f --- /dev/null +++ b/ArduinoAddons/Arduino_0.xx/libraries/SPI/SPI.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2010 by Cristian Maglie + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#ifndef _SPI_H_INCLUDED +#define _SPI_H_INCLUDED + +#include +#include +#include + +#define SPI_CLOCK_DIV4 0x00 +#define SPI_CLOCK_DIV16 0x01 +#define SPI_CLOCK_DIV64 0x02 +#define SPI_CLOCK_DIV128 0x03 +#define SPI_CLOCK_DIV2 0x04 +#define SPI_CLOCK_DIV8 0x05 +#define SPI_CLOCK_DIV32 0x06 +#define SPI_CLOCK_DIV64 0x07 + +#define SPI_MODE0 0x00 +#define SPI_MODE1 0x04 +#define SPI_MODE2 0x08 +#define SPI_MODE3 0x0C + +#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR +#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR +#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR + +class SPIClass { +public: + inline static byte transfer(byte _data); + + // SPI Configuration methods + + inline static void attachInterrupt(); + inline static void detachInterrupt(); // Default + + static void begin(); // Default + static void end(); + + static void setBitOrder(uint8_t); + static void setDataMode(uint8_t); + static void setClockDivider(uint8_t); +}; + +extern SPIClass SPI; + +byte SPIClass::transfer(byte _data) { + SPDR = _data; + while (!(SPSR & _BV(SPIF))) + ; + return SPDR; +} + +void SPIClass::attachInterrupt() { + SPCR |= _BV(SPIE); +} + +void SPIClass::detachInterrupt() { + SPCR &= ~_BV(SPIE); +} + +#endif diff --git a/ArduinoAddons/Arduino_0.xx/libraries/SPI/keywords.txt b/ArduinoAddons/Arduino_0.xx/libraries/SPI/keywords.txt new file mode 100644 index 0000000000..fa7616581a --- /dev/null +++ b/ArduinoAddons/Arduino_0.xx/libraries/SPI/keywords.txt @@ -0,0 +1,36 @@ +####################################### +# Syntax Coloring Map SPI +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +SPI KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### +begin KEYWORD2 +end KEYWORD2 +transfer KEYWORD2 +setBitOrder KEYWORD2 +setDataMode KEYWORD2 +setClockDivider KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### +SPI_CLOCK_DIV4 LITERAL1 +SPI_CLOCK_DIV16 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_CLOCK_DIV128 LITERAL1 +SPI_CLOCK_DIV2 LITERAL1 +SPI_CLOCK_DIV8 LITERAL1 +SPI_CLOCK_DIV32 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_MODE0 LITERAL1 +SPI_MODE1 LITERAL1 +SPI_MODE2 LITERAL1 +SPI_MODE3 LITERAL1 \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.cpp b/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.cpp new file mode 100644 index 0000000000..0653487d70 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.cpp @@ -0,0 +1,310 @@ +#include "LiquidCrystal.h" + +#include +#include +#include +#include "Arduino.h" + +// When the display powers up, it is configured as follows: +// +// 1. Display clear +// 2. Function set: +// DL = 1; 8-bit interface data +// N = 0; 1-line display +// F = 0; 5x8 dot character font +// 3. Display on/off control: +// D = 0; Display off +// C = 0; Cursor off +// B = 0; Blinking off +// 4. Entry mode set: +// I/D = 1; Increment by 1 +// S = 0; No shift +// +// Note, however, that resetting the Arduino doesn't reset the LCD, so we +// can't assume that its in that state when a sketch starts (and the +// LiquidCrystal constructor is called). + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) +{ + init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7); +} + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) +{ + init(0, rs, 255, enable, d0, d1, d2, d3, d4, d5, d6, d7); +} + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3) +{ + init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0); +} + +LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3) +{ + init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0); +} + +void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7) +{ + _rs_pin = rs; + _rw_pin = rw; + _enable_pin = enable; + + _data_pins[0] = d0; + _data_pins[1] = d1; + _data_pins[2] = d2; + _data_pins[3] = d3; + _data_pins[4] = d4; + _data_pins[5] = d5; + _data_pins[6] = d6; + _data_pins[7] = d7; + + pinMode(_rs_pin, OUTPUT); + // we can save 1 pin by not using RW. Indicate by passing 255 instead of pin# + if (_rw_pin != 255) { + pinMode(_rw_pin, OUTPUT); + } + pinMode(_enable_pin, OUTPUT); + + if (fourbitmode) + _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS; + else + _displayfunction = LCD_8BITMODE | LCD_1LINE | LCD_5x8DOTS; + + begin(16, 1); +} + +void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) { + if (lines > 1) { + _displayfunction |= LCD_2LINE; + } + _numlines = lines; + _currline = 0; + + // for some 1 line displays you can select a 10 pixel high font + if ((dotsize != 0) && (lines == 1)) { + _displayfunction |= LCD_5x10DOTS; + } + + // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION! + // according to datasheet, we need at least 40ms after power rises above 2.7V + // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50 + delayMicroseconds(50000); + // Now we pull both RS and R/W low to begin commands + digitalWrite(_rs_pin, LOW); + digitalWrite(_enable_pin, LOW); + if (_rw_pin != 255) { + digitalWrite(_rw_pin, LOW); + } + + //put the LCD into 4 bit or 8 bit mode + if (! (_displayfunction & LCD_8BITMODE)) { + // this is according to the hitachi HD44780 datasheet + // figure 24, pg 46 + + // we start in 8bit mode, try to set 4 bit mode + write4bits(0x03); + delayMicroseconds(4500); // wait min 4.1ms + + // second try + write4bits(0x03); + delayMicroseconds(4500); // wait min 4.1ms + + // third go! + write4bits(0x03); + delayMicroseconds(150); + + // finally, set to 4-bit interface + write4bits(0x02); + } else { + // this is according to the hitachi HD44780 datasheet + // page 45 figure 23 + + // Send function set command sequence + command(LCD_FUNCTIONSET | _displayfunction); + delayMicroseconds(4500); // wait more than 4.1ms + + // second try + command(LCD_FUNCTIONSET | _displayfunction); + delayMicroseconds(150); + + // third go + command(LCD_FUNCTIONSET | _displayfunction); + } + + // finally, set # lines, font size, etc. + command(LCD_FUNCTIONSET | _displayfunction); + + // turn the display on with no cursor or blinking default + _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF; + display(); + + // clear it off + clear(); + + // Initialize to default text direction (for romance languages) + _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT; + // set the entry mode + command(LCD_ENTRYMODESET | _displaymode); + +} + +/********** high level commands, for the user! */ +void LiquidCrystal::clear() +{ + command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero + delayMicroseconds(2000); // this command takes a long time! +} + +void LiquidCrystal::home() +{ + command(LCD_RETURNHOME); // set cursor position to zero + delayMicroseconds(2000); // this command takes a long time! +} + +void LiquidCrystal::setCursor(uint8_t col, uint8_t row) +{ + int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 }; + if ( row >= _numlines ) { + row = _numlines-1; // we count rows starting w/0 + } + + command(LCD_SETDDRAMADDR | (col + row_offsets[row])); +} + +// Turn the display on/off (quickly) +void LiquidCrystal::noDisplay() { + _displaycontrol &= ~LCD_DISPLAYON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} +void LiquidCrystal::display() { + _displaycontrol |= LCD_DISPLAYON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} + +// Turns the underline cursor on/off +void LiquidCrystal::noCursor() { + _displaycontrol &= ~LCD_CURSORON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} +void LiquidCrystal::cursor() { + _displaycontrol |= LCD_CURSORON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} + +// Turn on and off the blinking cursor +void LiquidCrystal::noBlink() { + _displaycontrol &= ~LCD_BLINKON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} +void LiquidCrystal::blink() { + _displaycontrol |= LCD_BLINKON; + command(LCD_DISPLAYCONTROL | _displaycontrol); +} + +// These commands scroll the display without changing the RAM +void LiquidCrystal::scrollDisplayLeft(void) { + command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT); +} +void LiquidCrystal::scrollDisplayRight(void) { + command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT); +} + +// This is for text that flows Left to Right +void LiquidCrystal::leftToRight(void) { + _displaymode |= LCD_ENTRYLEFT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// This is for text that flows Right to Left +void LiquidCrystal::rightToLeft(void) { + _displaymode &= ~LCD_ENTRYLEFT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// This will 'right justify' text from the cursor +void LiquidCrystal::autoscroll(void) { + _displaymode |= LCD_ENTRYSHIFTINCREMENT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// This will 'left justify' text from the cursor +void LiquidCrystal::noAutoscroll(void) { + _displaymode &= ~LCD_ENTRYSHIFTINCREMENT; + command(LCD_ENTRYMODESET | _displaymode); +} + +// Allows us to fill the first 8 CGRAM locations +// with custom characters +void LiquidCrystal::createChar(uint8_t location, uint8_t charmap[]) { + location &= 0x7; // we only have 8 locations 0-7 + command(LCD_SETCGRAMADDR | (location << 3)); + for (int i=0; i<8; i++) { + write(charmap[i]); + } +} + +/*********** mid level commands, for sending data/cmds */ + +inline void LiquidCrystal::command(uint8_t value) { + send(value, LOW); +} + +inline size_t LiquidCrystal::write(uint8_t value) { + send(value, HIGH); + return 1; // assume sucess +} + +/************ low level data pushing commands **********/ + +// write either command or data, with automatic 4/8-bit selection +void LiquidCrystal::send(uint8_t value, uint8_t mode) { + digitalWrite(_rs_pin, mode); + + // if there is a RW pin indicated, set it low to Write + if (_rw_pin != 255) { + digitalWrite(_rw_pin, LOW); + } + + if (_displayfunction & LCD_8BITMODE) { + write8bits(value); + } else { + write4bits(value>>4); + write4bits(value); + } +} + +void LiquidCrystal::pulseEnable(void) { + digitalWrite(_enable_pin, LOW); + delayMicroseconds(1); + digitalWrite(_enable_pin, HIGH); + delayMicroseconds(1); // enable pulse must be >450ns + digitalWrite(_enable_pin, LOW); + delayMicroseconds(100); // commands need > 37us to settle +} + +void LiquidCrystal::write4bits(uint8_t value) { + for (int i = 0; i < 4; i++) { + pinMode(_data_pins[i], OUTPUT); + digitalWrite(_data_pins[i], (value >> i) & 0x01); + } + + pulseEnable(); +} + +void LiquidCrystal::write8bits(uint8_t value) { + for (int i = 0; i < 8; i++) { + pinMode(_data_pins[i], OUTPUT); + digitalWrite(_data_pins[i], (value >> i) & 0x01); + } + + pulseEnable(); +} diff --git a/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.h b/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.h new file mode 100644 index 0000000000..24ec5afdf5 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/LiquidCrystal.h @@ -0,0 +1,106 @@ +#ifndef LiquidCrystal_h +#define LiquidCrystal_h + +#include +#include "Print.h" + +// commands +#define LCD_CLEARDISPLAY 0x01 +#define LCD_RETURNHOME 0x02 +#define LCD_ENTRYMODESET 0x04 +#define LCD_DISPLAYCONTROL 0x08 +#define LCD_CURSORSHIFT 0x10 +#define LCD_FUNCTIONSET 0x20 +#define LCD_SETCGRAMADDR 0x40 +#define LCD_SETDDRAMADDR 0x80 + +// flags for display entry mode +#define LCD_ENTRYRIGHT 0x00 +#define LCD_ENTRYLEFT 0x02 +#define LCD_ENTRYSHIFTINCREMENT 0x01 +#define LCD_ENTRYSHIFTDECREMENT 0x00 + +// flags for display on/off control +#define LCD_DISPLAYON 0x04 +#define LCD_DISPLAYOFF 0x00 +#define LCD_CURSORON 0x02 +#define LCD_CURSOROFF 0x00 +#define LCD_BLINKON 0x01 +#define LCD_BLINKOFF 0x00 + +// flags for display/cursor shift +#define LCD_DISPLAYMOVE 0x08 +#define LCD_CURSORMOVE 0x00 +#define LCD_MOVERIGHT 0x04 +#define LCD_MOVELEFT 0x00 + +// flags for function set +#define LCD_8BITMODE 0x10 +#define LCD_4BITMODE 0x00 +#define LCD_2LINE 0x08 +#define LCD_1LINE 0x00 +#define LCD_5x10DOTS 0x04 +#define LCD_5x8DOTS 0x00 + +class LiquidCrystal : public Print { +public: + LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); + LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); + LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3); + LiquidCrystal(uint8_t rs, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3); + + void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable, + uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, + uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7); + + void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS); + + void clear(); + void home(); + + void noDisplay(); + void display(); + void noBlink(); + void blink(); + void noCursor(); + void cursor(); + void scrollDisplayLeft(); + void scrollDisplayRight(); + void leftToRight(); + void rightToLeft(); + void autoscroll(); + void noAutoscroll(); + + void createChar(uint8_t, uint8_t[]); + void setCursor(uint8_t, uint8_t); + virtual size_t write(uint8_t); + void command(uint8_t); + + using Print::write; +private: + void send(uint8_t, uint8_t); + void write4bits(uint8_t); + void write8bits(uint8_t); + void pulseEnable(); + + uint8_t _rs_pin; // LOW: command. HIGH: character. + uint8_t _rw_pin; // LOW: write to LCD. HIGH: read from LCD. + uint8_t _enable_pin; // activated by a HIGH pulse. + uint8_t _data_pins[8]; + + uint8_t _displayfunction; + uint8_t _displaycontrol; + uint8_t _displaymode; + + uint8_t _initialized; + + uint8_t _numlines,_currline; +}; + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/keywords.txt b/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/keywords.txt new file mode 100644 index 0000000000..132845cb65 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/libraries/LiquidCrystal/keywords.txt @@ -0,0 +1,37 @@ +####################################### +# Syntax Coloring Map For LiquidCrystal +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +LiquidCrystal KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### + +begin KEYWORD2 +clear KEYWORD2 +home KEYWORD2 +print KEYWORD2 +setCursor KEYWORD2 +cursor KEYWORD2 +noCursor KEYWORD2 +blink KEYWORD2 +noBlink KEYWORD2 +display KEYWORD2 +noDisplay KEYWORD2 +autoscroll KEYWORD2 +noAutoscroll KEYWORD2 +leftToRight KEYWORD2 +rightToLeft KEYWORD2 +scrollDisplayLeft KEYWORD2 +scrollDisplayRight KEYWORD2 +createChar KEYWORD2 + +####################################### +# Constants (LITERAL1) +####################################### + diff --git a/ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.cpp b/ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.cpp new file mode 100644 index 0000000000..5e48073f73 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.cpp @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2010 by Cristian Maglie + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#include "pins_arduino.h" +#include "SPI.h" + +SPIClass SPI; + +void SPIClass::begin() { + + // Set SS to high so a connected chip will be "deselected" by default + digitalWrite(SS, HIGH); + + // When the SS pin is set as OUTPUT, it can be used as + // a general purpose output port (it doesn't influence + // SPI operations). + pinMode(SS, OUTPUT); + + // Warning: if the SS pin ever becomes a LOW INPUT then SPI + // automatically switches to Slave, so the data direction of + // the SS pin MUST be kept as OUTPUT. + SPCR |= _BV(MSTR); + SPCR |= _BV(SPE); + + // Set direction register for SCK and MOSI pin. + // MISO pin automatically overrides to INPUT. + // By doing this AFTER enabling SPI, we avoid accidentally + // clocking in a single bit since the lines go directly + // from "input" to SPI control. + // http://code.google.com/p/arduino/issues/detail?id=888 + pinMode(SCK, OUTPUT); + pinMode(MOSI, OUTPUT); +} + + +void SPIClass::end() { + SPCR &= ~_BV(SPE); +} + +void SPIClass::setBitOrder(uint8_t bitOrder) +{ + if(bitOrder == LSBFIRST) { + SPCR |= _BV(DORD); + } else { + SPCR &= ~(_BV(DORD)); + } +} + +void SPIClass::setDataMode(uint8_t mode) +{ + SPCR = (SPCR & ~SPI_MODE_MASK) | mode; +} + +void SPIClass::setClockDivider(uint8_t rate) +{ + SPCR = (SPCR & ~SPI_CLOCK_MASK) | (rate & SPI_CLOCK_MASK); + SPSR = (SPSR & ~SPI_2XCLOCK_MASK) | ((rate >> 2) & SPI_2XCLOCK_MASK); +} + diff --git a/ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.h b/ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.h new file mode 100644 index 0000000000..f647d5c891 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/libraries/SPI/SPI.h @@ -0,0 +1,70 @@ +/* + * Copyright (c) 2010 by Cristian Maglie + * SPI Master library for arduino. + * + * This file is free software; you can redistribute it and/or modify + * it under the terms of either the GNU General Public License version 2 + * or the GNU Lesser General Public License version 2.1, both as + * published by the Free Software Foundation. + */ + +#ifndef _SPI_H_INCLUDED +#define _SPI_H_INCLUDED + +#include +#include +#include + +#define SPI_CLOCK_DIV4 0x00 +#define SPI_CLOCK_DIV16 0x01 +#define SPI_CLOCK_DIV64 0x02 +#define SPI_CLOCK_DIV128 0x03 +#define SPI_CLOCK_DIV2 0x04 +#define SPI_CLOCK_DIV8 0x05 +#define SPI_CLOCK_DIV32 0x06 +//#define SPI_CLOCK_DIV64 0x07 + +#define SPI_MODE0 0x00 +#define SPI_MODE1 0x04 +#define SPI_MODE2 0x08 +#define SPI_MODE3 0x0C + +#define SPI_MODE_MASK 0x0C // CPOL = bit 3, CPHA = bit 2 on SPCR +#define SPI_CLOCK_MASK 0x03 // SPR1 = bit 1, SPR0 = bit 0 on SPCR +#define SPI_2XCLOCK_MASK 0x01 // SPI2X = bit 0 on SPSR + +class SPIClass { +public: + inline static byte transfer(byte _data); + + // SPI Configuration methods + + inline static void attachInterrupt(); + inline static void detachInterrupt(); // Default + + static void begin(); // Default + static void end(); + + static void setBitOrder(uint8_t); + static void setDataMode(uint8_t); + static void setClockDivider(uint8_t); +}; + +extern SPIClass SPI; + +byte SPIClass::transfer(byte _data) { + SPDR = _data; + while (!(SPSR & _BV(SPIF))) + ; + return SPDR; +} + +void SPIClass::attachInterrupt() { + SPCR |= _BV(SPIE); +} + +void SPIClass::detachInterrupt() { + SPCR &= ~_BV(SPIE); +} + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/libraries/SPI/keywords.txt b/ArduinoAddons/Arduino_1.x.x/libraries/SPI/keywords.txt new file mode 100644 index 0000000000..fa7616581a --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/libraries/SPI/keywords.txt @@ -0,0 +1,36 @@ +####################################### +# Syntax Coloring Map SPI +####################################### + +####################################### +# Datatypes (KEYWORD1) +####################################### + +SPI KEYWORD1 + +####################################### +# Methods and Functions (KEYWORD2) +####################################### +begin KEYWORD2 +end KEYWORD2 +transfer KEYWORD2 +setBitOrder KEYWORD2 +setDataMode KEYWORD2 +setClockDivider KEYWORD2 + + +####################################### +# Constants (LITERAL1) +####################################### +SPI_CLOCK_DIV4 LITERAL1 +SPI_CLOCK_DIV16 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_CLOCK_DIV128 LITERAL1 +SPI_CLOCK_DIV2 LITERAL1 +SPI_CLOCK_DIV8 LITERAL1 +SPI_CLOCK_DIV32 LITERAL1 +SPI_CLOCK_DIV64 LITERAL1 +SPI_MODE0 LITERAL1 +SPI_MODE1 LITERAL1 +SPI_MODE2 LITERAL1 +SPI_MODE3 LITERAL1 \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/boards.txt b/ArduinoAddons/Arduino_1.x.x/sanguino/boards.txt new file mode 100644 index 0000000000..ca2d74baf3 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/boards.txt @@ -0,0 +1,63 @@ +############################################################ + +atmega644.name=Sanguino W/ ATmega644P + +atmega644.upload.protocol=stk500 +atmega644.upload.maximum_size=63488 +atmega644.upload.speed=57600 + +atmega644.bootloader.low_fuses=0xFF +atmega644.bootloader.high_fuses=0x9A +atmega644.bootloader.extended_fuses=0xFF +atmega644.bootloader.path=atmega +atmega644.bootloader.file=ATmegaBOOT_168_atmega644p.hex +#atmega644.bootloader.file=ATmegaBOOT_644P.hex +atmega644.bootloader.unlock_bits=0x3F +atmega644.bootloader.lock_bits=0x0F + +atmega644.build.mcu=atmega644p +atmega644.build.f_cpu=16000000L +atmega644.build.core=arduino +atmega644.build.variant=standard +############################################################## + +atmega12848m.name=Sanguino W/ ATmega1284p 8mhz + +atmega12848m.upload.protocol=stk500 +atmega12848m.upload.maximum_size=131072 +atmega12848m.upload.speed=19200 + +atmega12848m.bootloader.low_fuses=0xFD +atmega12848m.bootloader.high_fuses=0x9A +atmega12848m.bootloader.extended_fuses=0xFF +atmega12848m.bootloader.path=atmega +atmega12848m.bootloader.file=ATmegaBOOT_168_atmega1284p_8m.hex +atmega12848m.bootloader.unlock_bits=0x3F +atmega12848m.bootloader.lock_bits=0x0F + +atmega12848m.build.mcu=atmega1284p +atmega12848m.build.f_cpu=8000000L +atmega12848m.build.core=arduino +atmega12848m.build.variant=standard + +############################################################## + +atmega1284.name=Sanguino W/ ATmega1284p 16mhz + +atmega1284.upload.protocol=stk500 +atmega1284.upload.maximum_size=131072 +atmega1284.upload.speed=57600 + +atmega1284.bootloader.low_fuses=0xFF +atmega1284.bootloader.high_fuses=0x9A +atmega1284.bootloader.extended_fuses=0xFF +atmega1284.bootloader.path=atmega +atmega1284.bootloader.file=ATmegaBOOT_168_atmega1284p.hex +atmega1284.bootloader.unlock_bits=0x3F +atmega1284.bootloader.lock_bits=0x0F + +atmega1284.build.mcu=atmega1284p +atmega1284.build.f_cpu=16000000L +atmega1284.build.core=arduino +atmega1284.build.variant=standard +# diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168.c b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168.c new file mode 100644 index 0000000000..9354a78cdd --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168.c @@ -0,0 +1,1071 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega8, ATmega128 and ATmega168 */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* */ +/* 20090308: integrated Mega changes into main bootloader */ +/* source by D. Mellis */ +/* 20080930: hacked for Arduino Mega (with the 1280 */ +/* processor, backwards compatible) */ +/* by D. Cuartielles */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include +#include +#include +#include +#include +#include + +/* the current avr-libc eeprom functions do not support the ATmega168 */ +/* own eeprom write/read functions are used instead */ +#if !defined(__AVR_ATmega168__) || !defined(__AVR_ATmega328P__) +#include +#endif + +/* Use the F_CPU defined in Makefile */ + +/* 20060803: hacked by DojoCorp */ +/* 20070626: hacked by David A. Mellis to decrease waiting time for auto-reset */ +/* set the waiting time for the bootloader */ +/* get this from the Makefile instead */ +/* #define MAX_TIME_COUNT (F_CPU>>4) */ + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20060803: hacked by DojoCorp */ +//#define BAUD_RATE 115200 +#ifndef BAUD_RATE +#define BAUD_RATE 19200 +#endif + + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + + +/* Adjust to suit whatever pin your hardware uses to enter the bootloader */ +/* ATmega128 has two UARTS so two pins are used to enter bootloader and select UART */ +/* ATmega1280 has four UARTS, but for Arduino Mega, we will only use RXD0 to get code */ +/* BL0... means UART0, BL1... means UART1 */ +#ifdef __AVR_ATmega128__ +#define BL_DDR DDRF +#define BL_PORT PORTF +#define BL_PIN PINF +#define BL0 PINF7 +#define BL1 PINF6 +#elif defined __AVR_ATmega1280__ +/* we just don't do anything for the MEGA and enter bootloader on reset anyway*/ +#elif defined __AVR_ATmega1284P_ || defined __AVR_ATmega644P__ + +#else +/* other ATmegas have only one UART, so only one pin is defined to enter bootloader */ +#define BL_DDR DDRD +#define BL_PORT PORTD +#define BL_PIN PIND +#define BL PIND6 +#endif + + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#if defined __AVR_ATmega128__ || defined __AVR_ATmega1280__ +/* Onboard LED is connected to pin PB7 (e.g. Crumb128, PROBOmega128, Savvy128, Arduino Mega) */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB7 +#elif defined __AVR_ATmega1284P__ || defined __AVR_ATmega644P__ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB0 +#else +/* Onboard LED is connected to pin PB5 in Arduino NG, Diecimila, and Duomilanuove */ +/* other boards like e.g. Crumb8, Crumb168 are using PB2 */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB5 +#endif + + +/* monitor functions will only be compiled when using ATmega128, due to bootblock size constraints */ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) +#define MONITOR 1 +#endif + + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( + +#if defined __AVR_ATmega1280__ +#define SIG2 0x97 +#define SIG3 0x03 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega1284P__ +#define SIG2 0x97 +#define SIG3 0x05 +#define PAGE_SIZE 0x080U //128 words + +#elif defined __AVR_ATmega1281__ +#define SIG2 0x97 +#define SIG3 0x04 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega644P__ +#define SIG2 0x96 +#define SIG3 0x0A +#define PAGE_SIZE 0x080U //128 words + +#elif defined __AVR_ATmega128__ +#define SIG2 0x97 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega64__ +#define SIG2 0x96 +#define SIG3 0x02 +#define PAGE_SIZE 0x80U //128 words + +#elif defined __AVR_ATmega32__ +#define SIG2 0x95 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega16__ +#define SIG2 0x94 +#define SIG3 0x03 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8__ +#define SIG2 0x93 +#define SIG3 0x07 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega88__ +#define SIG2 0x93 +#define SIG3 0x0a +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega168__ +#define SIG2 0x94 +#define SIG3 0x06 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega328P__ +#define SIG2 0x95 +#define SIG3 0x0F +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega162__ +#define SIG2 0x94 +#define SIG3 0x04 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega163__ +#define SIG2 0x94 +#define SIG3 0x02 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega169__ +#define SIG2 0x94 +#define SIG3 0x05 +#define PAGE_SIZE 0x40U //64 words + +#elif defined __AVR_ATmega8515__ +#define SIG2 0x93 +#define SIG3 0x06 +#define PAGE_SIZE 0x20U //32 words + +#elif defined __AVR_ATmega8535__ +#define SIG2 0x93 +#define SIG3 0x08 +#define PAGE_SIZE 0x20U //32 words +#endif + + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union { + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union { + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct { + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; +uint8_t address_high; + +uint8_t pagesz=0x80; + +uint8_t i; +uint8_t bootuart = 0; + +uint8_t error_count = 0; + +void (*app_start)(void) = 0x0000; + + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + +#ifdef WATCHDOG_MODS + ch = MCUSR; + MCUSR = 0; + + WDTCSR |= _BV(WDCE) | _BV(WDE); + WDTCSR = 0; + + // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. + if (! (ch & _BV(EXTRF))) // if its a not an external reset... + app_start(); // skip bootloader +#else + asm volatile("nop\n\t"); +#endif + + /* set pin direction for bootloader pin and enable pullup */ + /* for ATmega128, two pins need to be initialized */ +#ifdef __AVR_ATmega128__ + BL_DDR &= ~_BV(BL0); + BL_DDR &= ~_BV(BL1); + BL_PORT |= _BV(BL0); + BL_PORT |= _BV(BL1); +#else + /* We run the bootloader regardless of the state of this pin. Thus, don't + put it in a different state than the other pins. --DAM, 070709 + This also applies to Arduino Mega -- DC, 080930 + BL_DDR &= ~_BV(BL); + BL_PORT |= _BV(BL); + */ +#endif + + +#ifdef __AVR_ATmega128__ + /* check which UART should be used for booting */ + if(bit_is_clear(BL_PIN, BL0)) { + bootuart = 1; + } + else if(bit_is_clear(BL_PIN, BL1)) { + bootuart = 2; + } +#endif + +#if defined __AVR_ATmega1280__ || defined __AVR_ATmega1284P__ || defined __AVR_ATmega644P__ + /* the mega1280 chip has four serial ports ... we could eventually use any of them, or not? */ + /* however, we don't wanna confuse people, to avoid making a mess, we will stick to RXD0, TXD0 */ + bootuart = 1; +#endif + + /* check if flash is programmed already, if not start bootloader anyway */ + if(pgm_read_byte_near(0x0000) != 0xFF) { + +#ifdef __AVR_ATmega128__ + /* no UART was selected, start application */ + if(!bootuart) { + app_start(); + } +#else + /* check if bootloader pin is set low */ + /* we don't start this part neither for the m8, nor m168 */ + //if(bit_is_set(BL_PIN, BL)) { + // app_start(); + // } +#endif + } + +#ifdef __AVR_ATmega128__ + /* no bootuart was selected, default to uart 0 */ + if(!bootuart) { + bootuart = 1; + } +#endif + + + /* initialize UART(s) depending on CPU defined */ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + if(bootuart == 1) { + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0A = 0x00; + UCSR0C = 0x06; + UCSR0B = _BV(TXEN0)|_BV(RXEN0); + } + if(bootuart == 2) { + UBRR1L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR1H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR1A = 0x00; + UCSR1C = 0x06; + UCSR1B = _BV(TXEN1)|_BV(RXEN1); + } +#elif defined __AVR_ATmega163__ + UBRR = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRRHI = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSRA = 0x00; + UCSRB = _BV(TXEN)|_BV(RXEN); +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + +#ifdef DOUBLE_SPEED + UCSR0A = (1<> 8; +#else + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; +#endif + + UCSR0B = (1<>8; // set baud rate + UBRRL = (((F_CPU/BAUD_RATE)/16)-1); + UCSRB = (1<> 8; + UCSRA = 0x00; + UCSRC = 0x06; + UCSRB = _BV(TXEN)|_BV(RXEN); +#endif + +#if defined __AVR_ATmega1280__ + /* Enable internal pull-up resistor on pin D0 (RX), in order + to supress line noise that prevents the bootloader from + timing out (DAM: 20070509) */ + /* feature added to the Arduino Mega --DC: 080930 */ + DDRE &= ~_BV(PINE0); + PORTE |= _BV(PINE0); +#endif + + + /* set LED pin as output */ + LED_DDR |= _BV(LED); + + + /* flash onboard LED to signal entering of bootloader */ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + // 4x for UART0, 5x for UART1 + flash_led(NUM_LED_FLASHES + bootuart); +#else + flash_led(NUM_LED_FLASHES); +#endif + + /* 20050803: by DojoCorp, this is one of the parts provoking the + system to stop listening, cancelled from the original */ + //putch('\0'); + + /* forever loop */ + for (;;) { + + /* get character from UART */ + ch = getch(); + + /* A bunch of if...else if... gives smaller code than switch...case ! */ + + /* Hello is anyone home ? */ + if(ch=='0') { + nothing_response(); + } + + + /* Request programmer ID */ + /* Not using PROGMEM string due to boot block in m128 being beyond 64kB boundry */ + /* Would need to selectively manipulate RAMPZ, and it's only 9 characters anyway so who cares. */ + else if(ch=='1') { + if (getch() == ' ') { + putch(0x14); + putch('A'); + putch('V'); + putch('R'); + putch(' '); + putch('I'); + putch('S'); + putch('P'); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* AVR ISP/STK500 board commands DON'T CARE so default nothing_response */ + else if(ch=='@') { + ch2 = getch(); + if (ch2>0x85) getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') { + ch2 = getch(); + if(ch2==0x80) byte_response(HW_VER); // Hardware version + else if(ch2==0x81) byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') { + getNch(5); + nothing_response(); + } + + + /* P: Enter programming mode */ + /* R: Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='P' || ch=='R') { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') { + nothing_response(); +#ifdef WATCHDOG_MODS + // autoreset via watchdog (sneaky!) + WDTCSR = _BV(WDE); + while (1); // 16 ms +#endif + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') { + if (getch() == 0x30) { + getch(); + ch = getch(); + getch(); + if (ch == 0) { + byte_response(SIG1); + } else if (ch == 1) { + byte_response(SIG2); + } else { + byte_response(SIG3); + } + } else { + getNch(3); + byte_response(0x00); + } + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') { + length.byte[1] = getch(); + length.byte[0] = getch(); + flags.eeprom = 0; + if (getch() == 'E') flags.eeprom = 1; + for (w=0;w127) address_high = 0x01; //Only possible with m128, m256 will need 3rd address byte. FIXME + else address_high = 0x00; +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) + RAMPZ = address_high; +#endif + address.word = address.word << 1; //address * 2 -> byte location + /* if ((length.byte[0] & 0x01) == 0x01) length.word++; //Even up an odd number of bytes */ + if ((length.byte[0] & 0x01)) length.word++; //Even up an odd number of bytes + cli(); //Disable interrupts, just to be sure +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + while(bit_is_set(EECR,EEPE)); //Wait for previous EEPROM writes to complete +#else + while(bit_is_set(EECR,EEWE)); //Wait for previous EEPROM writes to complete +#endif + asm volatile( + "clr r17 \n\t" //page_word_count + "lds r30,address \n\t" //Address of FLASH location (in bytes) + "lds r31,address+1 \n\t" + "ldi r28,lo8(buff) \n\t" //Start of buffer array in RAM + "ldi r29,hi8(buff) \n\t" + "lds r24,length \n\t" //Length of data to be written (in bytes) + "lds r25,length+1 \n\t" + "length_loop: \n\t" //Main loop, repeat for number of words in block + "cpi r17,0x00 \n\t" //If page_word_count=0 then erase page + "brne no_page_erase \n\t" + "wait_spm1: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm1 \n\t" + "ldi r16,0x03 \n\t" //Erase page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "wait_spm2: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm2 \n\t" + + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "no_page_erase: \n\t" + "ld r0,Y+ \n\t" //Write 2 bytes into page buffer + "ld r1,Y+ \n\t" + + "wait_spm3: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm3 \n\t" + "ldi r16,0x01 \n\t" //Load r0,r1 into FLASH page buffer + "sts %0,r16 \n\t" + "spm \n\t" + + "inc r17 \n\t" //page_word_count++ + "cpi r17,%1 \n\t" + "brlo same_page \n\t" //Still same page in FLASH + "write_page: \n\t" + "clr r17 \n\t" //New page, write current one first + "wait_spm4: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm4 \n\t" +#ifdef __AVR_ATmega163__ + "andi r30,0x80 \n\t" // m163 requires Z6:Z1 to be zero during page write +#endif + "ldi r16,0x05 \n\t" //Write page pointed to by Z + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" + "ori r30,0x7E \n\t" // recover Z6:Z1 state after page write (had to be zero during write) +#endif + "wait_spm5: \n\t" + "lds r16,%0 \n\t" //Wait for previous spm to complete + "andi r16,1 \n\t" + "cpi r16,1 \n\t" + "breq wait_spm5 \n\t" + "ldi r16,0x11 \n\t" //Re-enable RWW section + "sts %0,r16 \n\t" + "spm \n\t" +#ifdef __AVR_ATmega163__ + ".word 0xFFFF \n\t" + "nop \n\t" +#endif + "same_page: \n\t" + "adiw r30,2 \n\t" //Next word in FLASH + "sbiw r24,2 \n\t" //length-2 + "breq final_write \n\t" //Finished + "rjmp length_loop \n\t" + "final_write: \n\t" + "cpi r17,0 \n\t" + "breq block_done \n\t" + "adiw r24,2 \n\t" //length+2, fool above check on length after short page write + "rjmp write_page \n\t" + "block_done: \n\t" + "clr __zero_reg__ \n\t" //restore zero register +#if defined __AVR_ATmega168__ || __AVR_ATmega328P__ || __AVR_ATmega128__ || __AVR_ATmega1280__ || __AVR_ATmega1281__ || __AVR_ATmega1284P__ || __AVR_ATmega644P__ + : "=m" (SPMCSR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#else + : "=m" (SPMCR) : "M" (PAGE_SIZE) : "r0","r16","r17","r24","r25","r28","r29","r30","r31" +#endif + ); + /* Should really add a wait for RWW section to be enabled, don't actually need it since we never */ + /* exit the bootloader without a power cycle anyhow */ + } + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } + } + + + /* Read memory block mode, length is big endian. */ + else if(ch=='t') { + length.byte[1] = getch(); + length.byte[0] = getch(); +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + if (address.word>0x7FFF) flags.rampz = 1; // No go with m256, FIXME + else flags.rampz = 0; +#endif + address.word = address.word << 1; // address * 2 -> byte location + if (getch() == 'E') flags.eeprom = 1; + else flags.eeprom = 0; + if (getch() == ' ') { // Command terminator + putch(0x14); + for (w=0;w < length.word;w++) { // Can handle odd and even lengths okay + if (flags.eeprom) { // Byte access EEPROM read +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while(EECR & (1<= 'a') { + return (a - 'a' + 0x0a); + } else if(a >= '0') { + return(a - '0'); + } + return a; +} + + +char gethex(void) { + return (gethexnib() << 4) + gethexnib(); +} + + +void puthex(char ch) { + char ah; + + ah = ch >> 4; + if(ah >= 0x0a) { + ah = ah - 0x0a + 'a'; + } else { + ah += '0'; + } + + ch &= 0x0f; + if(ch >= 0x0a) { + ch = ch - 0x0a + 'a'; + } else { + ch += '0'; + } + + putch(ah); + putch(ch); +} + + +void putch(char ch) +{ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + if(bootuart == 1) { + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; + } + else if (bootuart == 2) { + while (!(UCSR1A & _BV(UDRE1))); + UDR1 = ch; + } +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +#else + /* m8,16,32,169,8515,8535,163 */ + while (!(UCSRA & _BV(UDRE))); + UDR = ch; +#endif +} + + +char getch(void) +{ +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + uint32_t count = 0; + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))) { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + + return UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))) { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + + return UDR1; + } + return 0; +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + uint32_t count = 0; + while(!(UCSR0A & _BV(RXC0))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR0; +#else + /* m8,16,32,169,8515,8535,163 */ + uint32_t count = 0; + while(!(UCSRA & _BV(RXC))){ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + return UDR; +#endif +} + + +void getNch(uint8_t count) +{ + while(count--) { +#if defined(__AVR_ATmega128__) || defined(__AVR_ATmega1280__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + if(bootuart == 1) { + while(!(UCSR0A & _BV(RXC0))); + UDR0; + } + else if(bootuart == 2) { + while(!(UCSR1A & _BV(RXC1))); + UDR1; + } +#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__) + getch(); +#else + /* m8,16,32,169,8515,8535,163 */ + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + //while(!(UCSRA & _BV(RXC))); + //UDR; + getch(); // need to handle time out +#endif + } +} + + +void byte_response(uint8_t val) +{ + if (getch() == ' ') { + putch(0x14); + putch(val); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } +} + + +void nothing_response(void) +{ + if (getch() == ' ') { + putch(0x14); + putch(0x10); + } else { + if (++error_count == MAX_ERROR_COUNT) + app_start(); + } +} + +void flash_led(uint8_t count) +{ + while (count--) { + LED_PORT |= _BV(LED); + _delay_ms(100); + LED_PORT &= ~_BV(LED); + _delay_ms(100); + } +} + + +/* end of file ATmegaBOOT.c */ diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p.hex b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p.hex new file mode 100644 index 0000000000..a63dc8dd04 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p.hex @@ -0,0 +1,130 @@ +:020000021000EC +:10F000000C9446F80C9465F80C9465F80C9465F82B +:10F010000C9465F80C9465F80C9465F80C9465F8FC +:10F020000C9465F80C9465F80C9465F80C9465F8EC +:10F030000C9465F80C9465F80C9465F80C9465F8DC +:10F040000C9465F80C9465F80C9465F80C9465F8CC +:10F050000C9465F80C9465F80C9465F80C9465F8BC +:10F060000C9465F80C9465F80C9465F80C9465F8AC +:10F070000C9465F80C9465F80C9465F80C9465F89C +:10F080000C9465F80C9465F80C9465F811241FBE77 +:10F09000CFEFD0E4DEBFCDBF11E0A0E0B1E0E8EDFE +:10F0A000F7EF01E00BBF02C007900D92A230B1074D +:10F0B000D9F712E0A2E0B1E001C01D92AD30B10776 +:10F0C000E1F70E947EF90C94EAFB0C9400F8909111 +:10F0D0000201913019F0923041F008959091C000F2 +:10F0E00095FFFCCF8093C60008959091C80095FFCE +:10F0F000FCCF8093CE0008951F93982F95959595FA +:10F1000095959595905D182F1F701A304CF4105DF1 +:10F11000892F0E9467F8812F0E9467F81F91089538 +:10F12000195A892F0E9467F8812F0E9467F81F9152 +:10F130000895EF92FF920F931F9380910201813007 +:10F1400069F1823031F080E01F910F91FF90EF90D4 +:10F150000895EE24FF2487018091C80087FD17C021 +:10F160000894E11CF11C011D111D81E4E81682E4E4 +:10F17000F8068FE0080780E0180770F3E0910401BB +:10F18000F091050109958091C80087FFE9CF809132 +:10F19000CE001F910F91FF90EF900895EE24FF2471 +:10F1A00087018091C00087FD17C00894E11CF11C05 +:10F1B000011D111D81E4E81682E4F8068FE00807BE +:10F1C00080E0180770F3E0910401F09105010995C2 +:10F1D0008091C00087FFE9CF8091C6001F910F91F9 +:10F1E000FF90EF9008951F930E9499F8182F0E94A6 +:10F1F00067F8113634F410330CF01053812F1F913F +:10F2000008951755812F1F9108951F930E94F3F8B9 +:10F21000182F0E94F3F81295107F810F1F91089507 +:10F2200020910201882339F0213031F0223061F041 +:10F2300081508823C9F708959091C00097FFFCCFB3 +:10F240009091C6008150F5CF9091C80097FFFCCFF8 +:10F250009091CE008150EDCF1F93182F0E9499F806 +:10F26000803281F0809103018F5F809303018530AC +:10F2700011F01F910895E0910401F09105010995A5 +:10F280001F91089584E10E9467F8812F0E9467F81A +:10F2900080E10E9467F8EDCF0E9499F8803271F00A +:10F2A000809103018F5F80930301853009F00895F9 +:10F2B000E0910401F09105010995089584E10E940F +:10F2C00067F880E10E9467F8089515C0289A2FEF2B +:10F2D00031EE44E0215030404040E1F700C00000F2 +:10F2E00028982FEF31EE44E0215030404040E1F7C4 +:10F2F00000C000008150882349F70895EF92FF92E3 +:10F300000F931F93CF93DF93000081E0809302015E +:10F3100080E18093C4001092C5001092C00086E086 +:10F320008093C20088E18093C100209A81E00E940E +:10F3300065F90E9499F88033B1F18133B9F18034D5 +:10F3400009F454C0813409F45AC0823409F469C004 +:10F35000853409F46CC0803531F1823521F1813575 +:10F3600011F1853509F469C0863509F471C0843618 +:10F3700009F47AC0843709F4E1C0853709F43FC144 +:10F38000863709F44AC0809103018F5F809303019F +:10F39000853079F6E0910401F091050109950E940C +:10F3A00099F8803351F60E944CF9C3CF0E9499F826 +:10F3B000803249F784E10E9467F881E40E9467F88F +:10F3C00086E50E9467F882E50E9467F880E20E9465 +:10F3D00067F889E40E9467F883E50E9467F880E592 +:10F3E0000E9467F880E10E9467F8A3CF0E9499F815 +:10F3F0008638C8F20E9499F80E944CF99ACF0E9470 +:10F4000099F8803809F414C1813809F415C182389B +:10F4100009F416C1883909F407C180E00E942CF96B +:10F4200088CF84E10E9410F90E944CF982CF85E0D8 +:10F430000E9410F90E944CF97CCF0E9499F88093A9 +:10F4400006010E9499F8809307010E944CF971CF40 +:10F450000E9499F8803309F405C183E00E9410F9F5 +:10F4600080E00E942CF965CF0E9499F880930902F0 +:10F470000E9499F88093080280910C028E7F8093FD +:10F480000C020E9499F8853409F4FDC080910802AD +:10F49000909109020097A1F068E0E62E61E0F62E57 +:10F4A00000E010E00E9499F8F70181937F010F5F5F +:10F4B0001F4F80910802909109020817190790F3D5 +:10F4C0000E9499F8803209F05ECF80910C0280FF93 +:10F4D000ECC08091060190910701880F991F9093CD +:10F4E000070180930601209108023091090221153D +:10F4F0003105E9F048E0E42E41E0F42E00E010E0B0 +:10F50000F70161917F010E94DCFB809106019091DF +:10F510000701019690930701809306010F5F1F4F2B +:10F5200020910802309109020217130748F384E181 +:10F530000E9467F880E10E9467F8FBCE0E9499F86C +:10F54000809309020E9499F8809308028091060135 +:10F550009091070197FDA3C020910C022D7F20936D +:10F560000C02880F991F90930701809306010E9457 +:10F5700099F8853409F48DC080910C028E7F8093B8 +:10F580000C020E9499F8803209F0D3CE84E10E94E7 +:10F5900067F88091080290910902009709F440C031 +:10F5A00000E010E0809106019091070116C0FC0177 +:10F5B00084910E9467F8809106019091070101965D +:10F5C00090930701809306010F5F1F4F209108025F +:10F5D000309109020217130718F520910C0220FD43 +:10F5E00033C021FFE4CFA0E0B0E080509040AF4FA7 +:10F5F000BF4FABBFFC0187910E9467F8DCCF0E9430 +:10F6000099F8803209F0BFCE84E10E9467F88EE15C +:10F610000E9467F887E90E9467F885E00E9467F812 +:10F6200080E10E9467F885CE83E00E942CF981CEAC +:10F6300082E00E942CF97DCE81E00E942CF979CEE7 +:10F6400080E10E942CF975CE0E94D4FB0E9467F8DD +:10F650008091060190910701019690930701809394 +:10F660000601B2CF0E9499F80E9499F8082F0E94D3 +:10F6700099F8002309F48BC0013009F48CC085E0AF +:10F680000E942CF956CE80910C02816080930C026E +:10F69000FDCE80910C02816080930C0272CF20918C +:10F6A0000C02226020930C025CCF8091070187FD41 +:10F6B00076C010920B0280E08BBF80910601909182 +:10F6C0000701880F991F909307018093060180918D +:10F6D000080280FF09C080910802909109020196FA +:10F6E0009093090280930802F894F999FECF1127AC +:10F6F000E0910601F0910701C8E0D1E08091080295 +:10F7000090910902103091F400915700017001307E +:10F71000D9F303E000935700E8950091570001707A +:10F720000130D9F301E100935700E8950990199051 +:10F730000091570001700130D9F301E000935700A8 +:10F74000E8951395103898F0112700915700017033 +:10F750000130D9F305E000935700E8950091570078 +:10F7600001700130D9F301E100935700E89532961A +:10F77000029709F0C7CF103011F00296E5CF11249F +:10F7800084E10E9467F880E10E9467F8D2CD8EE1A3 +:10F790000E942CF9CECD87E90E942CF9CACDF1E068 +:10F7A000F0930B0281E088CFF999FECF92BD81BD25 +:10F7B000F89A992780B50895262FF999FECF1FBA98 +:10F7C00092BD81BD20BD0FB6F894FA9AF99A0FBE8A +:08F7D00001960895F894FFCFA3 +:02F7D8008000AF +:040000031000F000F9 +:00000001FF diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p_8m.hex b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p_8m.hex new file mode 100644 index 0000000000..7f5f3f3d46 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega1284p_8m.hex @@ -0,0 +1,130 @@ +:020000021000EC +:10F000000C9446F80C9465F80C9465F80C9465F82B +:10F010000C9465F80C9465F80C9465F80C9465F8FC +:10F020000C9465F80C9465F80C9465F80C9465F8EC +:10F030000C9465F80C9465F80C9465F80C9465F8DC +:10F040000C9465F80C9465F80C9465F80C9465F8CC +:10F050000C9465F80C9465F80C9465F80C9465F8BC +:10F060000C9465F80C9465F80C9465F80C9465F8AC +:10F070000C9465F80C9465F80C9465F80C9465F89C +:10F080000C9465F80C9465F80C9465F811241FBE77 +:10F09000CFEFD0E4DEBFCDBF11E0A0E0B1E0E8EDFE +:10F0A000F7EF01E00BBF02C007900D92A230B1074D +:10F0B000D9F712E0A2E0B1E001C01D92AD30B10776 +:10F0C000E1F70E947EF90C94EAFB0C9400F8909111 +:10F0D0000201913019F0923041F008959091C000F2 +:10F0E00095FFFCCF8093C60008959091C80095FFCE +:10F0F000FCCF8093CE0008951F93982F95959595FA +:10F1000095959595905D182F1F701A304CF4105DF1 +:10F11000892F0E9467F8812F0E9467F81F91089538 +:10F12000195A892F0E9467F8812F0E9467F81F9152 +:10F130000895EF92FF920F931F9380910201813007 +:10F1400069F1823031F080E01F910F91FF90EF90D4 +:10F150000895EE24FF2487018091C80087FD17C021 +:10F160000894E11CF11C011D111D81E2E81681EAE1 +:10F17000F80687E0080780E0180770F3E0910401C3 +:10F18000F091050109958091C80087FFE9CF809132 +:10F19000CE001F910F91FF90EF900895EE24FF2471 +:10F1A00087018091C00087FD17C00894E11CF11C05 +:10F1B000011D111D81E2E81681EAF80687E00807C3 +:10F1C00080E0180770F3E0910401F09105010995C2 +:10F1D0008091C00087FFE9CF8091C6001F910F91F9 +:10F1E000FF90EF9008951F930E9499F8182F0E94A6 +:10F1F00067F8113634F410330CF01053812F1F913F +:10F2000008951755812F1F9108951F930E94F3F8B9 +:10F21000182F0E94F3F81295107F810F1F91089507 +:10F2200020910201882339F0213031F0223061F041 +:10F2300081508823C9F708959091C00097FFFCCFB3 +:10F240009091C6008150F5CF9091C80097FFFCCFF8 +:10F250009091CE008150EDCF1F93182F0E9499F806 +:10F26000803281F0809103018F5F809303018530AC +:10F2700011F01F910895E0910401F09105010995A5 +:10F280001F91089584E10E9467F8812F0E9467F81A +:10F2900080E10E9467F8EDCF0E9499F8803271F00A +:10F2A000809103018F5F80930301853009F00895F9 +:10F2B000E0910401F09105010995089584E10E940F +:10F2C00067F880E10E9467F8089515C0289A2FEF2B +:10F2D00030E742E0215030404040E1F700C00000FC +:10F2E00028982FEF30E742E0215030404040E1F7CE +:10F2F00000C000008150882349F70895EF92FF92E3 +:10F300000F931F93CF93DF93000081E0809302015E +:10F3100089E18093C4001092C5001092C00086E07D +:10F320008093C20088E18093C100209A81E00E940E +:10F3300065F90E9499F88033B1F18133B9F18034D5 +:10F3400009F454C0813409F45AC0823409F469C004 +:10F35000853409F46CC0803531F1823521F1813575 +:10F3600011F1853509F469C0863509F471C0843618 +:10F3700009F47AC0843709F4E1C0853709F43FC144 +:10F38000863709F44AC0809103018F5F809303019F +:10F39000853079F6E0910401F091050109950E940C +:10F3A00099F8803351F60E944CF9C3CF0E9499F826 +:10F3B000803249F784E10E9467F881E40E9467F88F +:10F3C00086E50E9467F882E50E9467F880E20E9465 +:10F3D00067F889E40E9467F883E50E9467F880E592 +:10F3E0000E9467F880E10E9467F8A3CF0E9499F815 +:10F3F0008638C8F20E9499F80E944CF99ACF0E9470 +:10F4000099F8803809F414C1813809F415C182389B +:10F4100009F416C1883909F407C180E00E942CF96B +:10F4200088CF84E10E9410F90E944CF982CF85E0D8 +:10F430000E9410F90E944CF97CCF0E9499F88093A9 +:10F4400006010E9499F8809307010E944CF971CF40 +:10F450000E9499F8803309F405C183E00E9410F9F5 +:10F4600080E00E942CF965CF0E9499F880930902F0 +:10F470000E9499F88093080280910C028E7F8093FD +:10F480000C020E9499F8853409F4FDC080910802AD +:10F49000909109020097A1F068E0E62E61E0F62E57 +:10F4A00000E010E00E9499F8F70181937F010F5F5F +:10F4B0001F4F80910802909109020817190790F3D5 +:10F4C0000E9499F8803209F05ECF80910C0280FF93 +:10F4D000ECC08091060190910701880F991F9093CD +:10F4E000070180930601209108023091090221153D +:10F4F0003105E9F048E0E42E41E0F42E00E010E0B0 +:10F50000F70161917F010E94DCFB809106019091DF +:10F510000701019690930701809306010F5F1F4F2B +:10F5200020910802309109020217130748F384E181 +:10F530000E9467F880E10E9467F8FBCE0E9499F86C +:10F54000809309020E9499F8809308028091060135 +:10F550009091070197FDA3C020910C022D7F20936D +:10F560000C02880F991F90930701809306010E9457 +:10F5700099F8853409F48DC080910C028E7F8093B8 +:10F580000C020E9499F8803209F0D3CE84E10E94E7 +:10F5900067F88091080290910902009709F440C031 +:10F5A00000E010E0809106019091070116C0FC0177 +:10F5B00084910E9467F8809106019091070101965D +:10F5C00090930701809306010F5F1F4F209108025F +:10F5D000309109020217130718F520910C0220FD43 +:10F5E00033C021FFE4CFA0E0B0E080509040AF4FA7 +:10F5F000BF4FABBFFC0187910E9467F8DCCF0E9430 +:10F6000099F8803209F0BFCE84E10E9467F88EE15C +:10F610000E9467F887E90E9467F885E00E9467F812 +:10F6200080E10E9467F885CE83E00E942CF981CEAC +:10F6300082E00E942CF97DCE81E00E942CF979CEE7 +:10F6400080E10E942CF975CE0E94D4FB0E9467F8DD +:10F650008091060190910701019690930701809394 +:10F660000601B2CF0E9499F80E9499F8082F0E94D3 +:10F6700099F8002309F48BC0013009F48CC085E0AF +:10F680000E942CF956CE80910C02816080930C026E +:10F69000FDCE80910C02816080930C0272CF20918C +:10F6A0000C02226020930C025CCF8091070187FD41 +:10F6B00076C010920B0280E08BBF80910601909182 +:10F6C0000701880F991F909307018093060180918D +:10F6D000080280FF09C080910802909109020196FA +:10F6E0009093090280930802F894F999FECF1127AC +:10F6F000E0910601F0910701C8E0D1E08091080295 +:10F7000090910902103091F400915700017001307E +:10F71000D9F303E000935700E8950091570001707A +:10F720000130D9F301E100935700E8950990199051 +:10F730000091570001700130D9F301E000935700A8 +:10F74000E8951395103898F0112700915700017033 +:10F750000130D9F305E000935700E8950091570078 +:10F7600001700130D9F301E100935700E89532961A +:10F77000029709F0C7CF103011F00296E5CF11249F +:10F7800084E10E9467F880E10E9467F8D2CD8EE1A3 +:10F790000E942CF9CECD87E90E942CF9CACDF1E068 +:10F7A000F0930B0281E088CFF999FECF92BD81BD25 +:10F7B000F89A992780B50895262FF999FECF1FBA98 +:10F7C00092BD81BD20BD0FB6F894FA9AF99A0FBE8A +:08F7D00001960895F894FFCFA3 +:02F7D8008000AF +:040000031000F000F9 +:00000001FF diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega644p.hex b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega644p.hex new file mode 100644 index 0000000000..2edf9c6773 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/ATmegaBOOT_168_atmega644p.hex @@ -0,0 +1,126 @@ +:10F800000C943E7C0C945B7C0C945B7C0C945B7C39 +:10F810000C945B7C0C945B7C0C945B7C0C945B7C0C +:10F820000C945B7C0C945B7C0C945B7C0C945B7CFC +:10F830000C945B7C0C945B7C0C945B7C0C945B7CEC +:10F840000C945B7C0C945B7C0C945B7C0C945B7CDC +:10F850000C945B7C0C945B7C0C945B7C0C945B7CCC +:10F860000C945B7C0C945B7C0C945B7C0C945B7CBC +:10F870000C945B7C0C945B7C0C945B7C11241FBE11 +:10F88000CFEFD0E1DEBFCDBF11E0A0E0B1E0EAEA0A +:10F89000FFEF02C005900D92A230B107D9F712E038 +:10F8A000A2E0B1E001C01D92AD30B107E1F70E94C6 +:10F8B000747D0C94D37F0C94007C90910201913064 +:10F8C00019F0923041F008959091C00095FFFCCF5F +:10F8D0008093C60008959091C80095FFFCCF809357 +:10F8E000CE0008951F93982F95959595959595958C +:10F8F000905D182F1F701A304CF4105D892F0E94F4 +:10F900005D7C812F0E945D7C1F910895195A892F7B +:10F910000E945D7C812F0E945D7C1F910895EF9273 +:10F92000FF920F931F9380910201813069F1823021 +:10F9300031F080E01F910F91FF90EF900895EE2439 +:10F94000FF2487018091C80087FD17C00894E11C3F +:10F95000F11C011D111D81E4E81682E4F8068FE018 +:10F96000080780E0180770F3E0910401F0910501A9 +:10F9700009958091C80087FFE9CF8091CE001F9143 +:10F980000F91FF90EF900895EE24FF24870180915E +:10F99000C00087FD17C00894E11CF11C011D111D5A +:10F9A00081E4E81682E4F8068FE0080780E0180793 +:10F9B00070F3E0910401F091050109958091C00078 +:10F9C00087FFE9CF8091C6001F910F91FF90EF90C4 +:10F9D00008951F930E948F7C182F0E945D7C113622 +:10F9E00034F410330CF01053812F1F9108951755E4 +:10F9F000812F1F9108951F930E94E97C182F0E9468 +:10FA0000E97C1295107F810F1F91089520910201CA +:10FA1000882339F0213031F0223061F08150882381 +:10FA2000C9F708959091C00097FFFCCF9091C60050 +:10FA30008150F5CF9091C80097FFFCCF9091CE00F8 +:10FA40008150EDCF1F93182F0E948F7C803281F060 +:10FA5000809103018F5F80930301853011F01F9126 +:10FA60000895E0910401F091050109951F91089511 +:10FA700084E10E945D7C812F0E945D7C80E10E9478 +:10FA80005D7CEDCF0E948F7C803271F0809103010C +:10FA90008F5F80930301853009F00895E0910401A0 +:10FAA000F09105010995089584E10E945D7C80E153 +:10FAB0000E945D7C089515C0289A2FEF31EE44E036 +:10FAC000215030404040E1F700C0000028982FEF5F +:10FAD00031EE44E0215030404040E1F700C00000EA +:10FAE0008150882349F70895EF92FF920F931F9357 +:10FAF000CF93DF93000081E08093020180E1809347 +:10FB0000C4001092C5001092C00086E08093C2002D +:10FB100088E18093C100209A81E00E945B7D0E9471 +:10FB20008F7C8033B1F18133B9F1803409F454C052 +:10FB3000813409F45AC0823409F469C0853409F467 +:10FB40006CC0803531F1823521F1813511F1853577 +:10FB500009F469C0863509F471C0843609F47AC0A5 +:10FB6000843709F4E1C0853709F439C1863709F4CF +:10FB70004AC0809103018F5F80930301853079F63D +:10FB8000E0910401F091050109950E948F7C80337A +:10FB900051F60E94427DC3CF0E948F7C803249F78C +:10FBA00084E10E945D7C81E40E945D7C86E50E9488 +:10FBB0005D7C82E50E945D7C80E20E945D7C89E440 +:10FBC0000E945D7C83E50E945D7C80E50E945D7CF7 +:10FBD00080E10E945D7CA3CF0E948F7C8638C8F2B2 +:10FBE0000E948F7C0E94427D9ACF0E948F7C803839 +:10FBF00009F40EC1813809F40FC1823809F410C12B +:10FC0000883909F401C180E00E94227D88CF84E117 +:10FC10000E94067D0E94427D82CF85E00E94067D83 +:10FC20000E94427D7CCF0E948F7C809306010E94BF +:10FC30008F7C809307010E94427D71CF0E948F7C50 +:10FC4000803309F4F1C083E00E94067D80E00E94C9 +:10FC5000227D65CF0E948F7C809309020E948F7C59 +:10FC60008093080280910C028E7F80930C020E9488 +:10FC70008F7C853409F4E9C08091080290910902D3 +:10FC80000097A1F068E0E62E61E0F62E00E010E0BB +:10FC90000E948F7CF70181937F010F5F1F4F80913E +:10FCA0000802909109020817190790F30E948F7CAF +:10FCB000803209F05ECF80910C0280FFE5C0809118 +:10FCC000060190910701880F991F90930701809377 +:10FCD0000601209108023091090221153105E9F051 +:10FCE00048E0E42E41E0F42E00E010E0F7016191DD +:10FCF0007F010E94C57F80910601909107010196C6 +:10FD000090930701809306010F5F1F4F2091080217 +:10FD1000309109020217130748F384E10E945D7CC9 +:10FD200080E10E945D7CFBCE0E948F7C8093090263 +:10FD30000E948F7C809308028091060190910701B8 +:10FD400097FD9CC020910C022D7F20930C02880F00 +:10FD5000991F90930701809306010E948F7C853440 +:10FD600009F486C080910C028E7F80930C020E9461 +:10FD70008F7C803209F0D3CE84E10E945D7C20919B +:10FD800008023091090221153105D1F100E010E09F +:10FD900080910601909107010CC041FF5CC0019663 +:10FDA00090930701809306010F5F1F4F02171307FF +:10FDB00038F540910C0240FFF0CF0E94BD7F0E94B9 +:10FDC0005D7C809106019091070101969093070157 +:10FDD000809306012091080230910902E5CF0E942C +:10FDE0008F7C803209F0C5CE84E10E945D7C8EE17B +:10FDF0000E945D7C86E90E945D7C8AE00E945D7CB9 +:10FE000080E10E945D7C8BCE83E00E94227D87CEC4 +:10FE100082E00E94227D83CE81E00E94227D7FCEFF +:10FE200080E10E94227D7BCE0E948F7C0E948F7C8D +:10FE3000082F0E948F7C002309F497C0013009F439 +:10FE400098C08AE00E94227D6ACE80910C02816077 +:10FE500080930C0211CFFC0184910E945D7C209163 +:10FE6000080230910902809106019091070197CF15 +:10FE700080910C02816080930C0279CF20910C025A +:10FE8000226020930C0263CF80910701880F880BBA +:10FE9000817080930B028091060190910701880F79 +:10FEA000991F90930701809306018091080280FFBB +:10FEB00009C080910802909109020196909309026D +:10FEC00080930802F894F999FECF1127E09106017A +:10FED000F0910701C8E0D1E08091080290910902F9 +:10FEE000103091F40091570001700130D9F303E014 +:10FEF00000935700E8950091570001700130D9F345 +:10FF000001E100935700E89509901990009157007E +:10FF100001700130D9F301E000935700E895139583 +:10FF2000103898F011270091570001700130D9F373 +:10FF300005E000935700E8950091570001700130EB +:10FF4000D9F301E100935700E8953296029709F042 +:10FF5000C7CF103011F00296E5CF112484E10E9442 +:10FF60005D7C80E10E945D7CDACD8EE10E94227D85 +:10FF7000D6CD86E90E94227DD2CDF999FECF92BDE1 +:10FF800081BDF89A992780B50895262FF999FECF5B +:10FF90001FBA92BD81BD20BD0FB6F894FA9AF99AA6 +:0AFFA0000FBE01960895F894FFCFFC +:02FFAA008000D5 +:040000030000F80001 +:00000001FF diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/Makefile b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/Makefile new file mode 100644 index 0000000000..3f2bb61567 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega/Makefile @@ -0,0 +1,254 @@ +# Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ +# +# Instructions +# +# To make bootloader .hex file: +# make diecimila +# make lilypad +# make ng +# etc... +# +# To burn bootloader .hex file: +# make diecimila_isp +# make lilypad_isp +# make ng_isp +# etc... + +# program name should not be changed... +PROGRAM = ATmegaBOOT_168 + +# enter the parameters for the avrdude isp tool +ISPTOOL = stk500v2 +ISPPORT = usb +ISPSPEED = -b 115200 + +MCU_TARGET = atmega168 +LDSECTION = --section-start=.text=0x3800 + +# the efuse should really be 0xf8; since, however, only the lower +# three bits of that byte are used on the atmega168, avrdude gets +# confused if you specify 1's for the higher bits, see: +# http://tinker.it/now/2007/02/24/the-tale-of-avrdude-atmega168-and-extended-bits-fuses/ +# +# similarly, the lock bits should be 0xff instead of 0x3f (to +# unlock the bootloader section) and 0xcf instead of 0x0f (to +# lock it), but since the high two bits of the lock byte are +# unused, avrdude would get confused. + +ISPFUSES = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-e -u -U lock:w:0x3f:m -U efuse:w:0x$(EFUSE):m -U hfuse:w:0x$(HFUSE):m -U lfuse:w:0x$(LFUSE):m +ISPFLASH = avrdude -c $(ISPTOOL) -p $(MCU_TARGET) -P $(ISPPORT) $(ISPSPEED) \ +-U flash:w:$(PROGRAM)_$(TARGET).hex -U lock:w:0x0f:m + +STK500 = "C:\Program Files\Atmel\AVR Tools\STK500\Stk500.exe" +STK500-1 = $(STK500) -e -d$(MCU_TARGET) -pf -vf -if$(PROGRAM)_$(TARGET).hex \ +-lFF -LFF -f$(HFUSE)$(LFUSE) -EF8 -ms -q -cUSB -I200kHz -s -wt +STK500-2 = $(STK500) -d$(MCU_TARGET) -ms -q -lCF -LCF -cUSB -I200kHz -s -wt + + +OBJ = $(PROGRAM).o +OPTIMIZE = -O2 + +DEFS = +LIBS = + +CC = avr-gcc + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) +#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: + +lilypad: TARGET = lilypad +lilypad: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +lilypad: AVR_FREQ = 8000000L +lilypad: $(PROGRAM)_lilypad.hex + +lilypad_isp: lilypad +lilypad_isp: TARGET = lilypad +lilypad_isp: HFUSE = DD +lilypad_isp: LFUSE = E2 +lilypad_isp: EFUSE = 00 +lilypad_isp: isp + +lilypad_resonator: TARGET = lilypad_resonator +lilypad_resonator: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=3' +lilypad_resonator: AVR_FREQ = 8000000L +lilypad_resonator: $(PROGRAM)_lilypad_resonator.hex + +lilypad_resonator_isp: lilypad_resonator +lilypad_resonator_isp: TARGET = lilypad_resonator +lilypad_resonator_isp: HFUSE = DD +lilypad_resonator_isp: LFUSE = C6 +lilypad_resonator_isp: EFUSE = 00 +lilypad_resonator_isp: isp + +pro8: TARGET = pro_8MHz +pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro8: AVR_FREQ = 8000000L +pro8: $(PROGRAM)_pro_8MHz.hex + +pro8_isp: pro8 +pro8_isp: TARGET = pro_8MHz +pro8_isp: HFUSE = DD +pro8_isp: LFUSE = C6 +pro8_isp: EFUSE = 00 +pro8_isp: isp + +pro16: TARGET = pro_16MHz +pro16: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro16: AVR_FREQ = 16000000L +pro16: $(PROGRAM)_pro_16MHz.hex + +pro16_isp: pro16 +pro16_isp: TARGET = pro_16MHz +pro16_isp: HFUSE = DD +pro16_isp: LFUSE = C6 +pro16_isp: EFUSE = 00 +pro16_isp: isp + +pro20: TARGET = pro_20mhz +pro20: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' '-DWATCHDOG_MODS' +pro20: AVR_FREQ = 20000000L +pro20: $(PROGRAM)_pro_20mhz.hex + +pro20_isp: pro20 +pro20_isp: TARGET = pro_20mhz +pro20_isp: HFUSE = DD +pro20_isp: LFUSE = C6 +pro20_isp: EFUSE = 00 +pro20_isp: isp + +diecimila: TARGET = diecimila +diecimila: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' +diecimila: AVR_FREQ = 16000000L +diecimila: $(PROGRAM)_diecimila.hex + +diecimila_isp: diecimila +diecimila_isp: TARGET = diecimila +diecimila_isp: HFUSE = DD +diecimila_isp: LFUSE = FF +diecimila_isp: EFUSE = 00 +diecimila_isp: isp + +ng: TARGET = ng +ng: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>1' '-DNUM_LED_FLASHES=3' +ng: AVR_FREQ = 16000000L +ng: $(PROGRAM)_ng.hex + +ng_isp: ng +ng_isp: TARGET = ng +ng_isp: HFUSE = DD +ng_isp: LFUSE = FF +ng_isp: EFUSE = 00 +ng_isp: isp + +atmega328: TARGET = atmega328 +atmega328: MCU_TARGET = atmega328p +atmega328: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 +atmega328: AVR_FREQ = 16000000L +atmega328: LDSECTION = --section-start=.text=0x7800 +atmega328: $(PROGRAM)_atmega328.hex + +atmega328_isp: atmega328 +atmega328_isp: TARGET = atmega328 +atmega328_isp: MCU_TARGET = atmega328p +atmega328_isp: HFUSE = DA +atmega328_isp: LFUSE = FF +atmega328_isp: EFUSE = 05 +atmega328_isp: isp + +atmega328_pro8: TARGET = atmega328_pro_8MHz +atmega328_pro8: MCU_TARGET = atmega328p +atmega328_pro8: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=1' -DBAUD_RATE=57600 -DDOUBLE_SPEED +atmega328_pro8: AVR_FREQ = 8000000L +atmega328_pro8: LDSECTION = --section-start=.text=0x7800 +atmega328_pro8: $(PROGRAM)_atmega328_pro_8MHz.hex + +atmega328_pro8_isp: atmega328_pro8 +atmega328_pro8_isp: TARGET = atmega328_pro_8MHz +atmega328_pro8_isp: MCU_TARGET = atmega328p +atmega328_pro8_isp: HFUSE = DA +atmega328_pro8_isp: LFUSE = FF +atmega328_pro8_isp: EFUSE = 05 +atmega328_pro8_isp: isp + +mega: TARGET = atmega1280 +mega: MCU_TARGET = atmega1280 +mega: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' -DBAUD_RATE=57600 +mega: AVR_FREQ = 16000000L +mega: LDSECTION = --section-start=.text=0x1F000 +mega: $(PROGRAM)_atmega1280.hex + +mega_isp: mega +mega_isp: TARGET = atmega1280 +mega_isp: MCU_TARGET = atmega1280 +mega_isp: HFUSE = DA +mega_isp: LFUSE = FF +mega_isp: EFUSE = F5 +mega_isp: isp + +atmega1284p: TARGET = atmega1284p +atmega1284p: MCU_TARGET = atmega1284p +atmega1284p: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' '-DBAUD_RATE=57600' +atmega1284p: AVR_FREQ = 16000000L +atmega1284p: LDSECTION = --section-start=.text=0x1F000 +atmega1284p: $(PROGRAM)_atmega1284p.hex + +atmega1284p_8m: TARGET = atmega1284p +atmega1284p_8m: MCU_TARGET = atmega1284p +atmega1284p_8m: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' '-DBAUD_RATE=19200' +atmega1284p_8m: AVR_FREQ = 8000000L +atmega1284p_8m: LDSECTION = --section-start=.text=0x1F000 +atmega1284p_8m: $(PROGRAM)_atmega1284p_8m.hex + +atmega644p: TARGET = atmega644p +atmega644p: MCU_TARGET = atmega644p +atmega644p: CFLAGS += '-DMAX_TIME_COUNT=F_CPU>>4' '-DNUM_LED_FLASHES=0' '-DBAUD_RATE=57600' +atmega644p: AVR_FREQ = 16000000L +atmega644p: LDSECTION = --section-start=.text=0xF800 +atmega644p: $(PROGRAM)_atmega644p.hex + + +atmega1284p_isp: atmega1284p +atmega1284p_isp: TARGET = atmega1284p +atmega1284p_isp: MCU_TARGET = atmega1284p +atmega1284p_isp: HFUSE = DC +atmega1284p_isp: LFUSE = FF +atmega1284p_isp: EFUSE = FD +atmega1284p_isp: isp + +isp: $(TARGET) + $(ISPFUSES) + $(ISPFLASH) + +isp-stk500: $(PROGRAM)_$(TARGET).hex + $(STK500-1) + $(STK500-2) + +%.elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.hex: %.elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c new file mode 100644 index 0000000000..fd19d14ae6 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT.c @@ -0,0 +1,717 @@ +/**********************************************************/ +/* Serial Bootloader for Atmel megaAVR Controllers */ +/* */ +/* tested with ATmega644 and ATmega644P */ +/* should work with other mega's, see code for details */ +/* */ +/* ATmegaBOOT.c */ +/* */ +/* 20090131: Added 324P support from Alex Leone */ +/* Marius Kintel */ +/* 20080915: applied ADABoot mods for Sanguino 644P */ +/* Brian Riley */ +/* 20080711: hacked for Sanguino by Zach Smith */ +/* and Justin Day */ +/* 20070626: hacked for Arduino Diecimila (which auto- */ +/* resets when a USB connection is made to it) */ +/* by D. Mellis */ +/* 20060802: hacked for Arduino by D. Cuartielles */ +/* based on a previous hack by D. Mellis */ +/* and D. Cuartielles */ +/* */ +/* Monitor and debug functions were added to the original */ +/* code by Dr. Erik Lins, chip45.com. (See below) */ +/* */ +/* Thanks to Karl Pitrich for fixing a bootloader pin */ +/* problem and more informative LED blinking! */ +/* */ +/* For the latest version see: */ +/* http://www.chip45.com/ */ +/* */ +/* ------------------------------------------------------ */ +/* */ +/* based on stk500boot.c */ +/* Copyright (c) 2003, Jason P. Kyle */ +/* All rights reserved. */ +/* see avr1.org for original file and information */ +/* */ +/* This program is free software; you can redistribute it */ +/* and/or modify it under the terms of the GNU General */ +/* Public License as published by the Free Software */ +/* Foundation; either version 2 of the License, or */ +/* (at your option) any later version. */ +/* */ +/* This program is distributed in the hope that it will */ +/* be useful, but WITHOUT ANY WARRANTY; without even the */ +/* implied warranty of MERCHANTABILITY or FITNESS FOR A */ +/* PARTICULAR PURPOSE. See the GNU General Public */ +/* License for more details. */ +/* */ +/* You should have received a copy of the GNU General */ +/* Public License along with this program; if not, write */ +/* to the Free Software Foundation, Inc., */ +/* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +/* */ +/* Licence can be viewed at */ +/* http://www.fsf.org/licenses/gpl.txt */ +/* */ +/* Target = Atmel AVR m128,m64,m32,m16,m8,m162,m163,m169, */ +/* m8515,m8535. ATmega161 has a very small boot block so */ +/* isn't supported. */ +/* */ +/* Tested with m168 */ +/**********************************************************/ + +/* $Id$ */ + + +/* some includes */ +#include +#include +#include +#include +#include +#include + +#ifdef ADABOOT + #define NUM_LED_FLASHES 3 + #define ADABOOT_VER 1 +#endif + + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20080711: hack by Zach Hoeken */ +#define BAUD_RATE 38400 + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB0 + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( +#if defined(__AVR_ATmega1284P__) +#define SIG2 0x97 +#define SIG3 0x05 +#elif defined(__AVR_ATmega644P__) +#define SIG2 0x96 +#define SIG3 0x0A +#elif defined(__AVR_ATmega644__) +#define SIG2 0x96 +#define SIG3 0x09 +#elif defined(__AVR_ATmega324P__) +#define SIG2 0x95 +#define SIG3 0x08 +#endif + +#define PAGE_SIZE 0x080U //128 words +#define PAGE_SIZE_BYTES 0x100U //256 bytes + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union +{ + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union +{ + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct +{ + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; + +uint8_t error_count = 0; +uint8_t sreg; + +void (*app_start)(void) = 0x0000; + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + uint16_t i; + + asm volatile("nop\n\t"); + +#ifdef ADABOOT // BBR/LF 10/8/2007 & 9/13/2008 + ch = MCUSR; + MCUSR = 0; + + WDTCSR |= _BV(WDCE) | _BV(WDE); + WDTCSR = 0; + + // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. + if (! (ch & _BV(EXTRF))) // if its a not an external reset... + app_start(); // skip bootloader +#endif + + + //initialize our serial port. + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1< 0x85) + getch(); + nothing_response(); + } + + + /* AVR ISP/STK500 board requests */ + else if(ch=='A') + { + ch2 = getch(); + if(ch2 == 0x80) + byte_response(HW_VER); // Hardware version + else if(ch2==0x81) + byte_response(SW_MAJOR); // Software major version + else if(ch2==0x82) + byte_response(SW_MINOR); // Software minor version + else if(ch2==0x98) + byte_response(0x03); // Unknown but seems to be required by avr studio 3.56 + else + byte_response(0x00); // Covers various unnecessary responses we don't care about + } + + + /* Device Parameters DON'T CARE, DEVICE IS FIXED */ + else if(ch=='B') + { + getNch(20); + nothing_response(); + } + + + /* Parallel programming stuff DON'T CARE */ + else if(ch=='E') + { + getNch(5); + nothing_response(); + } + + + /* Enter programming mode */ + else if(ch=='P') + { + nothing_response(); + } + + + /* Leave programming mode */ + else if(ch=='Q') + { + nothing_response(); +#ifdef ADABOOT + // autoreset via watchdog (sneaky!) BBR/LF 9/13/2008 + WDTCSR = _BV(WDE); + while (1); // 16 ms +#endif + } + + + /* Erase device, don't care as we will erase one page at a time anyway. */ + else if(ch=='R') + { + nothing_response(); + } + + + /* Set address, little endian. EEPROM in bytes, FLASH in words */ + /* Perhaps extra address bytes may be added in future to support > 128kB FLASH. */ + /* This might explain why little endian was used here, big endian used everywhere else. */ + else if(ch=='U') + { + address.byte[0] = getch(); + address.byte[1] = getch(); + nothing_response(); + } + + + /* Universal SPI programming command, disabled. Would be used for fuses and lock bits. */ + else if(ch=='V') + { + getNch(4); + byte_response(0x00); + } + + + /* Write memory, length is big endian and is in bytes */ + else if(ch=='d') + { + length.byte[1] = getch(); + length.byte[0] = getch(); + + flags.eeprom = 0; + if (getch() == 'E') + flags.eeprom = 1; + + for (i=0; i byte location + address.word = address.word << 1; + + //Even up an odd number of bytes + if ((length.byte[0] & 0x01)) + length.word++; + + // HACKME: EEPE used to be EEWE + //Wait for previous EEPROM writes to complete + //while(bit_is_set(EECR,EEPE)); + while(EECR & (1< byte location + } + + // Command terminator + if (getch() == ' ') + { + putch(0x14); + for (w=0; w= 'a') + ah = ah - 'a' + 0x0a; + else if(ah >= '0') + ah -= '0'; + if(al >= 'a') + al = al - 'a' + 0x0a; + else if(al >= '0') + al -= '0'; + + return (ah << 4) + al; +} + + +void puthex(char ch) +{ + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) + ah = ah - 0x0a + 'a'; + else + ah += '0'; + + al = (ch & 0x0f); + if(al >= 0x0a) + al = al - 0x0a + 'a'; + else + al += '0'; + + putch(ah); + putch(al); +} + + +void putch(char ch) +{ + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +} + + + + +char getch(void) +{ + uint32_t count = 0; + +#ifdef ADABOOT + LED_PORT &= ~_BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + while(!(UCSR0A & _BV(RXC0))) + { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + +#ifdef ADABOOT + LED_PORT |= _BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + return UDR0; +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;i +#include +#include +#include +#include +#include +#include + +#ifdef ADABOOT + #define NUM_LED_FLASHES 3 + #define ADABOOT_VER 1 +#endif + + +/* 20070707: hacked by David A. Mellis - after this many errors give up and launch application */ +#define MAX_ERROR_COUNT 5 + +/* set the UART baud rate */ +/* 20080711: hack by Zach Hoeken */ +#define BAUD_RATE 38400 + +/* SW_MAJOR and MINOR needs to be updated from time to time to avoid warning message from AVR Studio */ +/* never allow AVR Studio to do an update !!!! */ +#define HW_VER 0x02 +#define SW_MAJOR 0x01 +#define SW_MINOR 0x10 + +/* onboard LED is used to indicate, that the bootloader was entered (3x flashing) */ +/* if monitor functions are included, LED goes on after monitor was entered */ +#define LED_DDR DDRB +#define LED_PORT PORTB +#define LED_PIN PINB +#define LED PINB0 + +/* define various device id's */ +/* manufacturer byte is always the same */ +#define SIG1 0x1E // Yep, Atmel is the only manufacturer of AVR micros. Single source :( +#if defined(__AVR_ATmega1284P__) +#define SIG2 0x97 +#define SIG3 0x05 +#elif defined(__AVR_ATmega644P__) +#define SIG2 0x96 +#define SIG3 0x0A +#elif defined(__AVR_ATmega644__) +#define SIG2 0x96 +#define SIG3 0x09 +#elif defined(__AVR_ATmega324P__) +#define SIG2 0x95 +#define SIG3 0x08 +#endif +#define PAGE_SIZE 0x080U //128 words +#define PAGE_SIZE_BYTES 0x100U //256 bytes + +/* function prototypes */ +void putch(char); +char getch(void); +void getNch(uint8_t); +void byte_response(uint8_t); +void nothing_response(void); +char gethex(void); +void puthex(char); +void flash_led(uint8_t); + +/* some variables */ +union address_union +{ + uint16_t word; + uint8_t byte[2]; +} address; + +union length_union +{ + uint16_t word; + uint8_t byte[2]; +} length; + +struct flags_struct +{ + unsigned eeprom : 1; + unsigned rampz : 1; +} flags; + +uint8_t buff[256]; + +uint8_t error_count = 0; +uint8_t sreg; + +void (*app_start)(void) = 0x0000; + +/* main program starts here */ +int main(void) +{ + uint8_t ch,ch2; + uint16_t w; + uint16_t i; + + asm volatile("nop\n\t"); + +#ifdef ADABOOT // BBR/LF 10/8/2007 & 9/13/2008 + ch = MCUSR; + MCUSR = 0; + + WDTCSR |= _BV(WDCE) | _BV(WDE); + WDTCSR = 0; + + // Check if the WDT was used to reset, in which case we dont bootload and skip straight to the code. woot. + if (! (ch & _BV(EXTRF))) // if its a not an external reset... + app_start(); // skip bootloader +#endif + + + //initialize our serial port. + UBRR0L = (uint8_t)(F_CPU/(BAUD_RATE*16L)-1); + UBRR0H = (F_CPU/(BAUD_RATE*16L)-1) >> 8; + UCSR0B = (1<= 'a') + ah = ah - 'a' + 0x0a; + else if(ah >= '0') + ah -= '0'; + if(al >= 'a') + al = al - 'a' + 0x0a; + else if(al >= '0') + al -= '0'; + + return (ah << 4) + al; +} + + +void puthex(char ch) +{ + char ah,al; + + ah = (ch & 0xf0) >> 4; + if(ah >= 0x0a) + ah = ah - 0x0a + 'a'; + else + ah += '0'; + + al = (ch & 0x0f); + if(al >= 0x0a) + al = al - 0x0a + 'a'; + else + al += '0'; + + putch(ah); + putch(al); +} + + +void putch(char ch) +{ + while (!(UCSR0A & _BV(UDRE0))); + UDR0 = ch; +} + + + + +char getch(void) +{ + uint32_t count = 0; + +#ifdef ADABOOT + LED_PORT &= ~_BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + while(!(UCSR0A & _BV(RXC0))) + { + /* 20060803 DojoCorp:: Addon coming from the previous Bootloader*/ + /* HACKME:: here is a good place to count times*/ + count++; + if (count > MAX_TIME_COUNT) + app_start(); + } + +#ifdef ADABOOT + LED_PORT |= _BV(LED); // toggle LED to show activity - BBR/LF 10/3/2007 & 9/13/2008 +#endif + + return UDR0; +} + + +void getNch(uint8_t count) +{ + uint8_t i; + for(i=0;iLGfm1A41uP9J@S^hlIRIPm?1e(GU^e8!7+sIL zub)tSOw0kGV+`u3Egd9-O6mhK50zs{g~zy_%ZJDHto(mD3T8}uVc^88N8bMFuYY=8 zYG3NfliquPo+DFFPE{8dT-=&EK5=_$cdIsJv`eHMt#dk=RHbi=Fg>aU-9`$>fPY)cu)`^ag3ZvXbyzSaY+&$X&u4`2M`#oOEa+7Glp*Y0SO zuIYc-nR7|%k(|QRQ#n_in$W5L4RjsGObqNiywjQUf$qcI06ouK@Ita{9c&9EyVpVf z&UMiB>6rd>{2VrX}+5IA{+*g7Lad>>s`@_!+Z1ENhZAqOTNS6KE zsn#+#dU=0%8%DnlMh4o-8c%I0yIOnh&Qct2ceXk@u(fRZPzR3a#o@Ap9p!n0zwFm_ zV=a9iV5?P3t<+j7b%whE>7N*3_}e;hfh`FG>Bpcv0$i#dLM$ zvZs$!Yj;HHt1Q_y#_H@EYaO5X@z`yr*uN)l@KapNxmNPiN&SWWAMg1eyb7|Et1DZ1 zo}d2wuv*l0zgqbGCw(9H(b{ui%!L@g+GX`8ag`RLM;Cf*o7A0?d#VOKWvNbVyKTar zX`N`BL|f`LIg*EUx_7m!vwN(S>>guLZw0eb*k%yh{37+6lw*_c>KcNs8$m^t>-AGv zDd@ftj`yZD>WJ3lbzayhw6@*(z4?{92McDUYsQ?_gJ+lZ0A_t4-&HVZ?K(D4Fhj2( zebv5lsG}lp@P;$ygmTx3S=-{BKGe0Y6KCRc{SR%X^WV#Wlj(0A(!L>;pSo0MedJuu zxzlRr^R3Sh_a%Rv)8G1O4qg>HGaX&Db{!kapU&(A|FjiO#&RcJnDfMkj}C09*r->T zXS;p>*}-?Lt?!bLdsAHlTPvmyC2_?a8eV%y-ji^ghtk*KibKOaBLn(-3g82E`#8-( z{NCD!--!iyPU1o3B0Oe5DFEtcBX^JznTn6UJsFY9AX_7HIev#a`U*hzTzpUo`G)7g z1%|6&vf*l&YIr^r8eV{L=;DLRITn(9a0SdY`i0;!yvRi7gT>ghEeY zmo7e73Rf9k2Fnd!1uG3-4XX`*32rj{Ww^!ga#&~h8VDM`78(q%fF{E$A!_(KNEp5z z?lim#?l!zy@C}032)ef`Yof_e~{?!`fTdV3UkpWyEyJNNtNkdt^&c@vK$0hW*O zND^SV48PivOaQ9{Zxj5w;LlrWd!OK_;6A}W6a1FoVZoEL(mv-Rw_!YAm;g{~Glh4b z&85!*^t1g&j{5h^cQL=m{8eViCZ9B0_}t2T5Azq9H!&|_PBO1yZe?y_-of0)jGKKd zeaw5Af6V+S^KY2!Q|2|y1vr}k&CC;-Nq&Sr?Behiwz-D2dzr6u zOpN_cP*3wk<%G=*=L5{dcLhlp(iQmW_#}nH3ACZMU-Sd~z~k|AS1qIQH+c z{&m*n;)W{;IzL|KKeGN-=C_zPF~7~ck6GvNMdlRik1-!%&dDR6N15j^zr(zo`4}^O zIPpYKPw`WEOt3SSdFKKg=C-|TbDH_ef0%PJbo_tr9EwMmu;9l9A4Q%4%PqPO3?eT? zo@}=%#xv=u_~06gf%#g&D=bU_7ay#&oW1J|)Qq?F*W&pp^z#Y#Rbdh9zA8rbMS3c@ z?-l;5El2Rdd}Hr}1=duy<~^-dXn2uziQ&c8Ov6`Na||!BXlzt`u*^#Dfv>X4wHozT zTk~zEu`INi#_}P?nTK;T18%U0sgOU1eXzy}8U5TW@^hnwDd6IRwN}32fOVeX8ZoX~ z5$9T~(%95n3k~09EjE0+wG??G#x0?W1;%EMn7c2EG0qipcbP>oQSm{sn7a}&cP^0= zx8>31XkTi14STIBWH;yGQqFU=&Gf8BrJq0bM+#3)4yk{KDJLD6hb5eoutmI@{e;a} zC_kj9;)96D&mDr}RytP+bB*}m4zULA5Nlw)H4*&s5=AH;ZW z6Od5$k!} zW5z-;ke-SUXa}N;4;~hIctp(Cw?$4K7cuNNK7FuX+>7?}nk272_>OhG@qfUgy%-fA z9I$TH$h_Y0x2+w5I}Lx|>Jj{q;2#-&!g>YyX&ieJ_F6Q;mv}uqcGh*JzZL2J2KF~3 z0Ojx~=4XI&xR)7KJa?q0;)8vB*8DB;?&5Js-{1C&_ZSC&*15L-E);4+KR@8Uwf+h5 z?&8OgzTTe}?>anoZ-t=zTqp> zWW!6;C5D%&nTD@X#fDcXui=$yzTxYY&+saBt>M*bjo@{L_d?L{jjGP@8r2{;YWNnl z$?#VcJwH+L!B^A{!+!Ok;edL~aGiR>aD)1h;YQVO_%`*j;oH@(3^%J+3qWAhVNGNoTua8q?}!Y4_;9}GWuVupBVmwdeQLf>Se=k zs8<-Ny4>(5YPsR#>Q=!uhO?}g;W5^F!#UO_!?{+6;XLbJ!{=C?h9_D*h9_CO z4PR*OGd#t5!e+XkKW8)D&ma0o!5{H{UI^PcPwz3`&-@9qe(uN}M>Y?zeh%{<<^{}s z%vUozcPo0gp#4KhqB&YpTN`zkF7n+}9EbIh#$Z*#y}%8A|N2mEA`**NEpglt16`QhHz6P5R8`uV!@WiaO5(V z%Trp?fYOFQEL5^85UwY6Nlhe@Aj41$O%u(b`arqY8!drFtBDt{Sh2de7V2wjJ^tEA zbF{H36f6epv??*%HP>CVAjYTa%St^J<(1X+Sy2tO*bN(aw1KCn+EwlLU`Dy6f{k}+Od}$+orbjGfc}wFJ)|BYCJm; zjS8!r8kBoEta5DNHc?5acBQ=tvZG*!XM|EAJXeU&MSI3-h&M!H2{YPCJ=)5mj67?r zGrF0l&F6_8(4$VEnHsl?f~n+DB3EDL_EhRQGXB!GIMK$|O>RA9Wz|rJ>&9LP_C#Zy z7i%FHX{l)n={170Y%db7;>^f;dn%o#`ZAzZg%hVwP|^~Ql{7Wh;M%V(39OHmc#F%5 zOVif{sT#wzO)bF?o)d|U(NMg&;cU$u%XlJ)#%H%Pmz{KP8e!8)KaIYWE&~eGRRnlN z87-!SwC*ChT-@chEoOtX+SF(<2dMS3X{pCH)#ESKrbdga6HUw5wA^c(;=)2@xi&Rg zTsEk!VAE(KX4~TGz?f~fX*I0})aw}hO`$;Cj0DF(Rd&!Bbu`SE(YdFo4Pkd#o}FkML*D5b%gIx}K7C8CsuoNkz|qmY(`m7@NmV9(kIsrSxY2bwDfZZ?%0%y><&YlQ=sKMeJ+kJ& zo%T$7MrA|jGZGPVR)L$Bays#K0a2w#grR+wtC26A$Y;F9s8L-@JcP~segYm(83$K} zOKm~Cv?;Qo3fDHS%(FZciXc;cL!cX#_9P7G3c%QCwd6H4 z3^ygAaDAdd`o|ppL;t!%`jQXS$Nlj{tfe-=kx|;?Zaq+nMaNbh3p7XXvSqxF;MEpw zNz^t}Ev3QWEF!K%q!r(iXb9bDD(XXy8P?TCT5xX}!`SgggEfvJRs|YR&kh1j4xz=h zvJY;(l1C1W>;@ZB()^g-Xe1mDnQqsk7uzx%Ni;Nu>(8{ovBw+m>nCVhHPHxZaV^#% z>Q3;BqdCwR)>as)p3SOdG;|z?PQDiB73qw!gsFs@mbyAE;A(K@)V_@MKyZH_iQ(>> zGP6vp;;~S@!+~fNrza4jN{kIJ!8vrsYp{;`$J9e{d}DJWP=n`0OrIMZO5m*$ifiI= zs?;Wd8m#1Jm;cKL{ap_|0*@tQd;m`1=@Ax40boCN!gOT%J%k^#RFePZmHy7vDGts= zg~L=g8GoDdPD=mwn~gerq~gETu^-vU43>W$fd2l-DUJ_%w=3_*2s;e^Wj9cfX8JfbGO3L{e@aDPDRH_7ujy(2nPRl*iC| z!ZXFwL$Z~Q@0%#g_`Zj-jOW=5`R6F7<3Bm_pBe3sqMV2RspMmS?`O0hMwxyi9gp>t zum8!YKL;;1`dyIL9o6TfEaRDqvJ)?j_tK2|k_@>zLtd64Uym|ielQHq&#fqL!~Uso zzNsEs=>z2~{p*jY@5u1iN%nR<#rH7E^gGELsHX88$gqDJW%@10W!L`_WhK_nZ&0S+ z6Bpa{^iIziKgIWFlqr5Hly7>UN53!7dn@YiG|Do67V7D@todlq`4zX6LcE?YLRs3+ z%#hs~@`4Qc>J0e?lyh)BIQhL9Wf^}%hMYiogl?!jPD6?Yf{gAS11;-1$#@!PQwv@ zG*BP%hhl+v2sQ*76aIL#*=@*Us1)LX<`7%MhFBx+jHsch_8KaKy2fyz$82jyv|HX%k%nHx+MUqE zj&APKyIkR=jE0M&HA8XJ3*E+WV?wAzx9$p|pO@we5c@t<%hiRV-hYpZCZ2BW5l->B zG|i--FNP-< zOZtts-(8mW=$Qw!&qalv17}8bJbE5bS9?47Lo{!Al1o7>K~Fh^?!*b;XBjjjPS1~A OYA&HK7c8B*;C}&0n-4Ys literal 0 HcmV?d00001 diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT_644P.hex b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT_644P.hex new file mode 100644 index 0000000000..849c78f0f9 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/ATmegaBOOT_644P.hex @@ -0,0 +1,110 @@ +:020000021000EC +:10F000000C943EF80C9450F80C9450F80C9450F872 +:10F010000C9450F80C9450F80C9450F80C9450F850 +:10F020000C9450F80C9450F80C9450F80C9450F840 +:10F030000C9450F80C9450F80C9450F80C9450F830 +:10F040000C9450F80C9450F80C9450F80C9450F820 +:10F050000C9450F80C9450F80C9450F80C9450F810 +:10F060000C9450F80C9450F80C9450F80C9450F800 +:10F070000C9450F80C9450F80C9450F811241FBEC6 +:10F08000CFEFD0E1DEBFCDBF12E0A0E0B1E001C024 +:10F090001D92A930B107E1F70E9471F90C944FFB62 +:10F0A0000C9400F89091C00095FFFCCF8093C600AF +:10F0B00008951F93282F332727FD3095207F307028 +:10F0C00094E0359527959A95E1F72A3014F0295A5E +:10F0D00001C0205D182F1F701A3014F0195A01C09A +:10F0E000105D822F0E9452F8812F0E9452F81F91CA +:10F0F0000895EF92FF920F931F932898EE24FF2418 +:10F10000870113C00894E11CF11C011D111D81E051 +:10F11000E81689E0F8068DE3080780E0180728F074 +:10F12000E0910101F091020109958091C00087FFF3 +:10F13000E9CF289A8091C6001F910F91FF90EF9020 +:10F1400008950F931F930E9479F8082F0E9452F898 +:10F150000E9479F8182F0E9452F8013614F00755D2 +:10F1600003C000330CF00053113614F0175503C0E0 +:10F1700010330CF01053802F8295807F810F1F91E8 +:10F180000F91089590E007C02091C00027FFFCCFA9 +:10F190002091C6009F5F9817B8F308951F93182F0A +:10F1A0000E9479F8803251F484E10E9452F8812F54 +:10F1B0000E9452F880E10E9452F80CC08091000138 +:10F1C0008F5F80930001853029F4E0910101F09177 +:10F1D000020109951F9108950E9479F8803239F44F +:10F1E00084E10E9452F880E10E9452F808958091D3 +:10F1F00000018F5F80930001853029F4E0910101C7 +:10F20000F091020109950895DF93CF9300D000D0CB +:10F21000CDB7DEB7882309F481E090E03DC0289A9D +:10F2200019821A821B821C820CC029813A814B816F +:10F230005C812F5F3F4F4F4F5F4F29833A834B8352 +:10F240005C8329813A814B815C8120386EE33607EB +:10F2500060E0460760E0560740F3289819821A825A +:10F260001B821C820CC029813A814B815C812F5FFB +:10F270003F4F4F4F5F4F29833A834B835C832981F4 +:10F280003A814B815C8120306AEF360760E04607A7 +:10F2900060E0560740F39F5F981709F619821A82BB +:10F2A0001B821C820BC089819A81AB81BC81019633 +:10F2B000A11DB11D89839A83AB83BC8389819A8107 +:10F2C000AB81BC81803021E7920722E0A20720E0D9 +:10F2D000B20748F30F900F900F900F90CF91DF91EE +:10F2E0000895CF92DF92EF92FF920F931F93CF93E7 +:10F2F000DF93000094B714BE809160008861809312 +:10F3000060001092600091FD05C0E0910101F09154 +:10F310000201099589E18093C4001092C50088E13B +:10F320008093C10086E08093C2005098589A209A3A +:10F3300083E00E9404F981E00E9404F90E9479F8B8 +:10F34000803309F441C08133E1F40E9479F88032BE +:10F3500009F097C184E10E9452F881E40E9452F8BA +:10F3600086E50E9452F882E50E9452F880E20E94EF +:10F3700052F889E40E9452F883E50E9452F880E531 +:10F380000BC1803439F40E9479F88638E8F00E9485 +:10F3900079F81AC0813499F40E9479F8803811F410 +:10F3A00082E06CC1813811F481E068C1823811F4C7 +:10F3B00080E164C1883909F060C183E05FC18234B3 +:10F3C00031F484E10E94C2F80E94ECF8B7CF853492 +:10F3D00011F485E0F7CF8035B9F3813531F40E941F +:10F3E000ECF888E080936000FFCF823569F38535C3 +:10F3F00049F40E9479F8809303010E9479F8809380 +:10F400000401E2CF863521F484E00E94C2F835C1C0 +:10F41000843609F0C7C00E9479F8809306020E94E2 +:10F4200079F880930502809108028E7F809308020C +:10F430000E9479F8853429F48091080281608093D4 +:10F44000080205E011E0F801119281E0E538F807C3 +:10F45000D9F745E0C42E41E0D42EEE24FF2408C0A5 +:10F460000E9479F8F60181936F010894E11CF11C68 +:10F470008091050290910602E816F90688F30E9431 +:10F4800079F8803209F0FDC08091080280FD17C034 +:10F4900020C0F999FECF209103013091040132BDC3 +:10F4A00021BDF80141918F0140BDFA9AF99A2F5F71 +:10F4B0003F4F3093040120930301019602C080E086 +:10F4C00090E020910502309106028217930708F31D +:10F4D00062C08091030190910401880F991F90935D +:10F4E0000401809303018091050280FF09C080918F +:10F4F0000502909106020196909306028093050200 +:10F50000F999FECF1127E0910301F0910401C5E0C4 +:10F51000D1E08091050290910602103091F40091A3 +:10F52000570001700130D9F303E000935700E895CC +:10F530000091570001700130D9F301E100935700A9 +:10F54000E895099019900091570001700130D9F3A6 +:10F5500001E000935700E8951395103898F01127B3 +:10F560000091570001700130D9F305E00093570076 +:10F57000E8950091570001700130D9F301E1009343 +:10F580005700E8953296029709F0C7CF103011F076 +:10F590000296E5CF112484E10E9452F880E10E9496 +:10F5A00052F8CCCE843709F055C00E9479F8809388 +:10F5B00006020E9479F8809305020E9479F89091E2 +:10F5C0000802853421F49160909308020DC09E7F5B +:10F5D000909308028091030190910401880F991F74 +:10F5E00090930401809303010E9479F8803209F01E +:10F5F000A5CE84E10E9452F800E010E023C0809183 +:10F60000080280FF0BC0F999FECF80910301909111 +:10F61000040192BD81BDF89A80B507C081FD07C085 +:10F62000E0910301F091040184910E9452F88091CD +:10F6300003019091040101969093040180930301CA +:10F640000F5F1F4F8091050290910602081719075E +:10F65000B0F2A4CF853779F40E9479F8803289F42A +:10F6600084E10E9452F88EE10E9452F886E90E94DD +:10F6700052F88AE091CF863721F480E00E94CEF8DC +:10F680005DCE809100018F5F80930001853009F08D +:10F6900055CEE0910101F091020109954FCEF89409 +:02F6A000FFCF9A +:040000031000F000F9 +:00000001FF diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/Makefile b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/Makefile new file mode 100644 index 0000000000..2bb5e0e9ca --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/Makefile @@ -0,0 +1,56 @@ +#Makefile for ATmegaBOOT +# E.Lins, 18.7.2005 +# $Id$ + + +# program name should not be changed... +PROGRAM = ATmegaBOOT_644P + +# enter the target CPU frequency +AVR_FREQ = 16000000L + +MCU_TARGET = atmega644p +LDSECTION = --section-start=.text=0x1F000 + +OBJ = $(PROGRAM).o +OPTIMIZE = -Os + +DEFS = +LIBS = + +CC = avr-gcc + + +# Override is only needed by avr-lib build system. + +override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) -DF_CPU=$(AVR_FREQ) $(DEFS) +override LDFLAGS = -Wl,$(LDSECTION) +#override LDFLAGS = -Wl,-Map,$(PROGRAM).map,$(LDSECTION) + +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump + +all: CFLAGS += '-DMAX_TIME_COUNT=8000000L>>1' -DADABOOT +all: $(PROGRAM).hex + +$(PROGRAM).hex: $(PROGRAM).elf + $(OBJCOPY) -j .text -j .data -O ihex $< $@ + +$(PROGRAM).elf: $(OBJ) + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS) + +$(OBJ): ATmegaBOOT.c + avr-gcc $(CFLAGS) $(LDFLAGS) -c -g -Os -Wall -mmcu=$(MCU_TARGET) ATmegaBOOT.c -o $(PROGRAM).o + +%.lst: %.elf + $(OBJDUMP) -h -S $< > $@ + +%.srec: %.elf + $(OBJCOPY) -j .text -j .data -O srec $< $@ + +%.bin: %.elf + $(OBJCOPY) -j .text -j .data -O binary $< $@ + +clean: + rm -rf *.o *.elf *.lst *.map *.sym *.lss *.eep *.srec *.bin *.hex + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/README.txt b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/README.txt new file mode 100644 index 0000000000..8286007851 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/bootloaders/atmega644p/README.txt @@ -0,0 +1,3 @@ +Note: This bootloader support ATmega644, ATmega644P and ATmega324P. +To build, set PROGRAM and MCU_TARGET in the Makefile according to your target device. + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Arduino.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Arduino.h new file mode 100644 index 0000000000..b265825894 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Arduino.h @@ -0,0 +1,215 @@ +#ifndef Arduino_h +#define Arduino_h + +#include +#include +#include + +#include +#include +#include + +#include "binary.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#define HIGH 0x1 +#define LOW 0x0 + +#define INPUT 0x0 +#define OUTPUT 0x1 +#define INPUT_PULLUP 0x2 + +#define true 0x1 +#define false 0x0 + +#define PI 3.1415926535897932384626433832795 +#define HALF_PI 1.5707963267948966192313216916398 +#define TWO_PI 6.283185307179586476925286766559 +#define DEG_TO_RAD 0.017453292519943295769236907684886 +#define RAD_TO_DEG 57.295779513082320876798154814105 + +#define SERIAL 0x0 +#define DISPLAY 0x1 + +#define LSBFIRST 0 +#define MSBFIRST 1 + +#define CHANGE 1 +#define FALLING 2 +#define RISING 3 + +#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) || defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__) +#define DEFAULT 0 +#define EXTERNAL 1 +#define INTERNAL 2 +#else +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) +#define INTERNAL1V1 2 +#define INTERNAL2V56 3 +#else +#define INTERNAL 3 +#endif +#define DEFAULT 1 +#define EXTERNAL 0 +#endif + +// undefine stdlib's abs if encountered +#ifdef abs +#undef abs +#endif + +#define min(a,b) ((a)<(b)?(a):(b)) +#define max(a,b) ((a)>(b)?(a):(b)) +#define abs(x) ((x)>0?(x):-(x)) +#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt))) +#define round(x) ((x)>=0?(long)((x)+0.5):(long)((x)-0.5)) +#define radians(deg) ((deg)*DEG_TO_RAD) +#define degrees(rad) ((rad)*RAD_TO_DEG) +#define sq(x) ((x)*(x)) + +#define interrupts() sei() +#define noInterrupts() cli() + +#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) +#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() ) +#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() ) + +#define lowByte(w) ((uint8_t) ((w) & 0xff)) +#define highByte(w) ((uint8_t) ((w) >> 8)) + +#define bitRead(value, bit) (((value) >> (bit)) & 0x01) +#define bitSet(value, bit) ((value) |= (1UL << (bit))) +#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) +#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit)) + + +typedef unsigned int word; + +#define bit(b) (1UL << (b)) + +typedef uint8_t boolean; +typedef uint8_t byte; + +void init(void); + +void pinMode(uint8_t, uint8_t); +void digitalWrite(uint8_t, uint8_t); +int digitalRead(uint8_t); +int analogRead(uint8_t); +void analogReference(uint8_t mode); +void analogWrite(uint8_t, int); + +unsigned long millis(void); +unsigned long micros(void); +void delay(unsigned long); +void delayMicroseconds(unsigned int us); +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout); + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val); +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder); + +void attachInterrupt(uint8_t, void (*)(void), int mode); +void detachInterrupt(uint8_t); + +void setup(void); +void loop(void); + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. + +#define analogInPinToBit(P) (P) + +// On the ATmega1280, the addresses of some of the port registers are +// greater than 255, so we can't store them in uint8_t's. +extern const uint16_t PROGMEM port_to_mode_PGM[]; +extern const uint16_t PROGMEM port_to_input_PGM[]; +extern const uint16_t PROGMEM port_to_output_PGM[]; + +extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; +extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// Get the bit location within the hardware port of the given virtual pin. +// This comes from the pins_*.c file for the active board configuration. +// +// These perform slightly better as macros compared to inline functions +// +#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) ) +#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) ) +#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) ) +#define analogInPinToBit(P) (P) +#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) ) +#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) ) +#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) ) + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#ifdef ARDUINO_MAIN +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 +#define PG 7 +#define PH 8 +#define PJ 10 +#define PK 11 +#define PL 12 +#endif + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +#define TIMER3A 8 +#define TIMER3B 9 +#define TIMER3C 10 +#define TIMER4A 11 +#define TIMER4B 12 +#define TIMER4C 13 +#define TIMER4D 14 +#define TIMER5A 15 +#define TIMER5B 16 +#define TIMER5C 17 + +#ifdef __cplusplus +} // extern "C" +#endif + +#ifdef __cplusplus +#include "WCharacter.h" +#include "WString.h" +#include "HardwareSerial.h" + +uint16_t makeWord(uint16_t w); +uint16_t makeWord(byte h, byte l); + +#define word(...) makeWord(__VA_ARGS__) + +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L); + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0); +void noTone(uint8_t _pin); + +// WMath prototypes +long random(long); +long random(long, long); +void randomSeed(unsigned int); +long map(long, long, long, long, long); + +#endif + +#include "pins_arduino.h" + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/CDC.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/CDC.cpp new file mode 100644 index 0000000000..701e48398f --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/CDC.cpp @@ -0,0 +1,239 @@ + + +/* Copyright (c) 2011, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#include "Platform.h" +#include "USBAPI.h" +#include + +#if defined(USBCON) +#ifdef CDC_ENABLED + +#if (RAMEND < 1000) +#define SERIAL_BUFFER_SIZE 16 +#else +#define SERIAL_BUFFER_SIZE 64 +#endif + +struct ring_buffer +{ + unsigned char buffer[SERIAL_BUFFER_SIZE]; + volatile int head; + volatile int tail; +}; + +ring_buffer cdc_rx_buffer = { { 0 }, 0, 0}; + +typedef struct +{ + u32 dwDTERate; + u8 bCharFormat; + u8 bParityType; + u8 bDataBits; + u8 lineState; +} LineInfo; + +static volatile LineInfo _usbLineInfo = { 57600, 0x00, 0x00, 0x00, 0x00 }; + +#define WEAK __attribute__ ((weak)) + +extern const CDCDescriptor _cdcInterface PROGMEM; +const CDCDescriptor _cdcInterface = +{ + D_IAD(0,2,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,1), + + // CDC communication interface + D_INTERFACE(CDC_ACM_INTERFACE,1,CDC_COMMUNICATION_INTERFACE_CLASS,CDC_ABSTRACT_CONTROL_MODEL,0), + D_CDCCS(CDC_HEADER,0x10,0x01), // Header (1.10 bcd) + D_CDCCS(CDC_CALL_MANAGEMENT,1,1), // Device handles call management (not) + D_CDCCS4(CDC_ABSTRACT_CONTROL_MANAGEMENT,6), // SET_LINE_CODING, GET_LINE_CODING, SET_CONTROL_LINE_STATE supported + D_CDCCS(CDC_UNION,CDC_ACM_INTERFACE,CDC_DATA_INTERFACE), // Communication interface is master, data interface is slave 0 + D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_ACM),USB_ENDPOINT_TYPE_INTERRUPT,0x10,0x40), + + // CDC data interface + D_INTERFACE(CDC_DATA_INTERFACE,2,CDC_DATA_INTERFACE_CLASS,0,0), + D_ENDPOINT(USB_ENDPOINT_OUT(CDC_ENDPOINT_OUT),USB_ENDPOINT_TYPE_BULK,0x40,0), + D_ENDPOINT(USB_ENDPOINT_IN (CDC_ENDPOINT_IN ),USB_ENDPOINT_TYPE_BULK,0x40,0) +}; + +int WEAK CDC_GetInterface(u8* interfaceNum) +{ + interfaceNum[0] += 2; // uses 2 + return USB_SendControl(TRANSFER_PGM,&_cdcInterface,sizeof(_cdcInterface)); +} + +bool WEAK CDC_Setup(Setup& setup) +{ + u8 r = setup.bRequest; + u8 requestType = setup.bmRequestType; + + if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) + { + if (CDC_GET_LINE_CODING == r) + { + USB_SendControl(0,(void*)&_usbLineInfo,7); + return true; + } + } + + if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) + { + if (CDC_SET_LINE_CODING == r) + { + USB_RecvControl((void*)&_usbLineInfo,7); + return true; + } + + if (CDC_SET_CONTROL_LINE_STATE == r) + { + _usbLineInfo.lineState = setup.wValueL; + + // auto-reset into the bootloader is triggered when the port, already + // open at 1200 bps, is closed. this is the signal to start the watchdog + // with a relatively long period so it can finish housekeeping tasks + // like servicing endpoints before the sketch ends + if (1200 == _usbLineInfo.dwDTERate) { + // We check DTR state to determine if host port is open (bit 0 of lineState). + if ((_usbLineInfo.lineState & 0x01) == 0) { + *(uint16_t *)0x0800 = 0x7777; + wdt_enable(WDTO_120MS); + } else { + // Most OSs do some intermediate steps when configuring ports and DTR can + // twiggle more than once before stabilizing. + // To avoid spurious resets we set the watchdog to 250ms and eventually + // cancel if DTR goes back high. + + wdt_disable(); + wdt_reset(); + *(uint16_t *)0x0800 = 0x0; + } + } + return true; + } + } + return false; +} + + +int _serialPeek = -1; +void Serial_::begin(uint16_t baud_count) +{ +} + +void Serial_::end(void) +{ +} + +void Serial_::accept(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + int i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + + // while we have room to store a byte + while (i != buffer->tail) { + int c = USB_Recv(CDC_RX); + if (c == -1) + break; // no more data + buffer->buffer[buffer->head] = c; + buffer->head = i; + + i = (unsigned int)(buffer->head+1) % SERIAL_BUFFER_SIZE; + } +} + +int Serial_::available(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + return (unsigned int)(SERIAL_BUFFER_SIZE + buffer->head - buffer->tail) % SERIAL_BUFFER_SIZE; +} + +int Serial_::peek(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + if (buffer->head == buffer->tail) { + return -1; + } else { + return buffer->buffer[buffer->tail]; + } +} + +int Serial_::read(void) +{ + ring_buffer *buffer = &cdc_rx_buffer; + // if the head isn't ahead of the tail, we don't have any characters + if (buffer->head == buffer->tail) { + return -1; + } else { + unsigned char c = buffer->buffer[buffer->tail]; + buffer->tail = (unsigned int)(buffer->tail + 1) % SERIAL_BUFFER_SIZE; + return c; + } +} + +void Serial_::flush(void) +{ + USB_Flush(CDC_TX); +} + +size_t Serial_::write(uint8_t c) +{ + /* only try to send bytes if the high-level CDC connection itself + is open (not just the pipe) - the OS should set lineState when the port + is opened and clear lineState when the port is closed. + bytes sent before the user opens the connection or after + the connection is closed are lost - just like with a UART. */ + + // TODO - ZE - check behavior on different OSes and test what happens if an + // open connection isn't broken cleanly (cable is yanked out, host dies + // or locks up, or host virtual serial port hangs) + if (_usbLineInfo.lineState > 0) { + int r = USB_Send(CDC_TX,&c,1); + if (r > 0) { + return r; + } else { + setWriteError(); + return 0; + } + } + setWriteError(); + return 0; +} + +// This operator is a convenient way for a sketch to check whether the +// port has actually been configured and opened by the host (as opposed +// to just being connected to the host). It can be used, for example, in +// setup() before printing to ensure that an application on the host is +// actually ready to receive and display the data. +// We add a short delay before returning to fix a bug observed by Federico +// where the port is configured (lineState != 0) but not quite opened. +Serial_::operator bool() { + bool result = false; + if (_usbLineInfo.lineState > 0) + result = true; + delay(10); + return result; +} + +Serial_ Serial; + +#endif +#endif /* if defined(USBCON) */ diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Client.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Client.h new file mode 100644 index 0000000000..ea134838a2 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Client.h @@ -0,0 +1,26 @@ +#ifndef client_h +#define client_h +#include "Print.h" +#include "Stream.h" +#include "IPAddress.h" + +class Client : public Stream { + +public: + virtual int connect(IPAddress ip, uint16_t port) =0; + virtual int connect(const char *host, uint16_t port) =0; + virtual size_t write(uint8_t) =0; + virtual size_t write(const uint8_t *buf, size_t size) =0; + virtual int available() = 0; + virtual int read() = 0; + virtual int read(uint8_t *buf, size_t size) = 0; + virtual int peek() = 0; + virtual void flush() = 0; + virtual void stop() = 0; + virtual uint8_t connected() = 0; + virtual operator bool() = 0; +protected: + uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); }; +}; + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HID.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HID.cpp new file mode 100644 index 0000000000..ac63608449 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HID.cpp @@ -0,0 +1,520 @@ + + +/* Copyright (c) 2011, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#include "Platform.h" +#include "USBAPI.h" +#include "USBDesc.h" + +#if defined(USBCON) +#ifdef HID_ENABLED + +//#define RAWHID_ENABLED + +// Singletons for mouse and keyboard + +Mouse_ Mouse; +Keyboard_ Keyboard; + +//================================================================================ +//================================================================================ + +// HID report descriptor + +#define LSB(_x) ((_x) & 0xFF) +#define MSB(_x) ((_x) >> 8) + +#define RAWHID_USAGE_PAGE 0xFFC0 +#define RAWHID_USAGE 0x0C00 +#define RAWHID_TX_SIZE 64 +#define RAWHID_RX_SIZE 64 + +extern const u8 _hidReportDescriptor[] PROGMEM; +const u8 _hidReportDescriptor[] = { + + // Mouse + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 54 + 0x09, 0x02, // USAGE (Mouse) + 0xa1, 0x01, // COLLECTION (Application) + 0x09, 0x01, // USAGE (Pointer) + 0xa1, 0x00, // COLLECTION (Physical) + 0x85, 0x01, // REPORT_ID (1) + 0x05, 0x09, // USAGE_PAGE (Button) + 0x19, 0x01, // USAGE_MINIMUM (Button 1) + 0x29, 0x03, // USAGE_MAXIMUM (Button 3) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x01, // LOGICAL_MAXIMUM (1) + 0x95, 0x03, // REPORT_COUNT (3) + 0x75, 0x01, // REPORT_SIZE (1) + 0x81, 0x02, // INPUT (Data,Var,Abs) + 0x95, 0x01, // REPORT_COUNT (1) + 0x75, 0x05, // REPORT_SIZE (5) + 0x81, 0x03, // INPUT (Cnst,Var,Abs) + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) + 0x09, 0x30, // USAGE (X) + 0x09, 0x31, // USAGE (Y) + 0x09, 0x38, // USAGE (Wheel) + 0x15, 0x81, // LOGICAL_MINIMUM (-127) + 0x25, 0x7f, // LOGICAL_MAXIMUM (127) + 0x75, 0x08, // REPORT_SIZE (8) + 0x95, 0x03, // REPORT_COUNT (3) + 0x81, 0x06, // INPUT (Data,Var,Rel) + 0xc0, // END_COLLECTION + 0xc0, // END_COLLECTION + + // Keyboard + 0x05, 0x01, // USAGE_PAGE (Generic Desktop) // 47 + 0x09, 0x06, // USAGE (Keyboard) + 0xa1, 0x01, // COLLECTION (Application) + 0x85, 0x02, // REPORT_ID (2) + 0x05, 0x07, // USAGE_PAGE (Keyboard) + + 0x19, 0xe0, // USAGE_MINIMUM (Keyboard LeftControl) + 0x29, 0xe7, // USAGE_MAXIMUM (Keyboard Right GUI) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x01, // LOGICAL_MAXIMUM (1) + 0x75, 0x01, // REPORT_SIZE (1) + + 0x95, 0x08, // REPORT_COUNT (8) + 0x81, 0x02, // INPUT (Data,Var,Abs) + 0x95, 0x01, // REPORT_COUNT (1) + 0x75, 0x08, // REPORT_SIZE (8) + 0x81, 0x03, // INPUT (Cnst,Var,Abs) + + 0x95, 0x06, // REPORT_COUNT (6) + 0x75, 0x08, // REPORT_SIZE (8) + 0x15, 0x00, // LOGICAL_MINIMUM (0) + 0x25, 0x65, // LOGICAL_MAXIMUM (101) + 0x05, 0x07, // USAGE_PAGE (Keyboard) + + 0x19, 0x00, // USAGE_MINIMUM (Reserved (no event indicated)) + 0x29, 0x65, // USAGE_MAXIMUM (Keyboard Application) + 0x81, 0x00, // INPUT (Data,Ary,Abs) + 0xc0, // END_COLLECTION + +#if RAWHID_ENABLED + // RAW HID + 0x06, LSB(RAWHID_USAGE_PAGE), MSB(RAWHID_USAGE_PAGE), // 30 + 0x0A, LSB(RAWHID_USAGE), MSB(RAWHID_USAGE), + + 0xA1, 0x01, // Collection 0x01 + 0x85, 0x03, // REPORT_ID (3) + 0x75, 0x08, // report size = 8 bits + 0x15, 0x00, // logical minimum = 0 + 0x26, 0xFF, 0x00, // logical maximum = 255 + + 0x95, 64, // report count TX + 0x09, 0x01, // usage + 0x81, 0x02, // Input (array) + + 0x95, 64, // report count RX + 0x09, 0x02, // usage + 0x91, 0x02, // Output (array) + 0xC0 // end collection +#endif +}; + +extern const HIDDescriptor _hidInterface PROGMEM; +const HIDDescriptor _hidInterface = +{ + D_INTERFACE(HID_INTERFACE,1,3,0,0), + D_HIDREPORT(sizeof(_hidReportDescriptor)), + D_ENDPOINT(USB_ENDPOINT_IN (HID_ENDPOINT_INT),USB_ENDPOINT_TYPE_INTERRUPT,0x40,0x01) +}; + +//================================================================================ +//================================================================================ +// Driver + +u8 _hid_protocol = 1; +u8 _hid_idle = 1; + +#define WEAK __attribute__ ((weak)) + +int WEAK HID_GetInterface(u8* interfaceNum) +{ + interfaceNum[0] += 1; // uses 1 + return USB_SendControl(TRANSFER_PGM,&_hidInterface,sizeof(_hidInterface)); +} + +int WEAK HID_GetDescriptor(int i) +{ + return USB_SendControl(TRANSFER_PGM,_hidReportDescriptor,sizeof(_hidReportDescriptor)); +} + +void WEAK HID_SendReport(u8 id, const void* data, int len) +{ + USB_Send(HID_TX, &id, 1); + USB_Send(HID_TX | TRANSFER_RELEASE,data,len); +} + +bool WEAK HID_Setup(Setup& setup) +{ + u8 r = setup.bRequest; + u8 requestType = setup.bmRequestType; + if (REQUEST_DEVICETOHOST_CLASS_INTERFACE == requestType) + { + if (HID_GET_REPORT == r) + { + //HID_GetReport(); + return true; + } + if (HID_GET_PROTOCOL == r) + { + //Send8(_hid_protocol); // TODO + return true; + } + } + + if (REQUEST_HOSTTODEVICE_CLASS_INTERFACE == requestType) + { + if (HID_SET_PROTOCOL == r) + { + _hid_protocol = setup.wValueL; + return true; + } + + if (HID_SET_IDLE == r) + { + _hid_idle = setup.wValueL; + return true; + } + } + return false; +} + +//================================================================================ +//================================================================================ +// Mouse + +Mouse_::Mouse_(void) : _buttons(0) +{ +} + +void Mouse_::begin(void) +{ +} + +void Mouse_::end(void) +{ +} + +void Mouse_::click(uint8_t b) +{ + _buttons = b; + move(0,0,0); + _buttons = 0; + move(0,0,0); +} + +void Mouse_::move(signed char x, signed char y, signed char wheel) +{ + u8 m[4]; + m[0] = _buttons; + m[1] = x; + m[2] = y; + m[3] = wheel; + HID_SendReport(1,m,4); +} + +void Mouse_::buttons(uint8_t b) +{ + if (b != _buttons) + { + _buttons = b; + move(0,0,0); + } +} + +void Mouse_::press(uint8_t b) +{ + buttons(_buttons | b); +} + +void Mouse_::release(uint8_t b) +{ + buttons(_buttons & ~b); +} + +bool Mouse_::isPressed(uint8_t b) +{ + if ((b & _buttons) > 0) + return true; + return false; +} + +//================================================================================ +//================================================================================ +// Keyboard + +Keyboard_::Keyboard_(void) +{ +} + +void Keyboard_::begin(void) +{ +} + +void Keyboard_::end(void) +{ +} + +void Keyboard_::sendReport(KeyReport* keys) +{ + HID_SendReport(2,keys,sizeof(KeyReport)); +} + +extern +const uint8_t _asciimap[128] PROGMEM; + +#define SHIFT 0x80 +const uint8_t _asciimap[128] = +{ + 0x00, // NUL + 0x00, // SOH + 0x00, // STX + 0x00, // ETX + 0x00, // EOT + 0x00, // ENQ + 0x00, // ACK + 0x00, // BEL + 0x2a, // BS Backspace + 0x2b, // TAB Tab + 0x28, // LF Enter + 0x00, // VT + 0x00, // FF + 0x00, // CR + 0x00, // SO + 0x00, // SI + 0x00, // DEL + 0x00, // DC1 + 0x00, // DC2 + 0x00, // DC3 + 0x00, // DC4 + 0x00, // NAK + 0x00, // SYN + 0x00, // ETB + 0x00, // CAN + 0x00, // EM + 0x00, // SUB + 0x00, // ESC + 0x00, // FS + 0x00, // GS + 0x00, // RS + 0x00, // US + + 0x2c, // ' ' + 0x1e|SHIFT, // ! + 0x34|SHIFT, // " + 0x20|SHIFT, // # + 0x21|SHIFT, // $ + 0x22|SHIFT, // % + 0x24|SHIFT, // & + 0x34, // ' + 0x26|SHIFT, // ( + 0x27|SHIFT, // ) + 0x25|SHIFT, // * + 0x2e|SHIFT, // + + 0x36, // , + 0x2d, // - + 0x37, // . + 0x38, // / + 0x27, // 0 + 0x1e, // 1 + 0x1f, // 2 + 0x20, // 3 + 0x21, // 4 + 0x22, // 5 + 0x23, // 6 + 0x24, // 7 + 0x25, // 8 + 0x26, // 9 + 0x33|SHIFT, // : + 0x33, // ; + 0x36|SHIFT, // < + 0x2e, // = + 0x37|SHIFT, // > + 0x38|SHIFT, // ? + 0x1f|SHIFT, // @ + 0x04|SHIFT, // A + 0x05|SHIFT, // B + 0x06|SHIFT, // C + 0x07|SHIFT, // D + 0x08|SHIFT, // E + 0x09|SHIFT, // F + 0x0a|SHIFT, // G + 0x0b|SHIFT, // H + 0x0c|SHIFT, // I + 0x0d|SHIFT, // J + 0x0e|SHIFT, // K + 0x0f|SHIFT, // L + 0x10|SHIFT, // M + 0x11|SHIFT, // N + 0x12|SHIFT, // O + 0x13|SHIFT, // P + 0x14|SHIFT, // Q + 0x15|SHIFT, // R + 0x16|SHIFT, // S + 0x17|SHIFT, // T + 0x18|SHIFT, // U + 0x19|SHIFT, // V + 0x1a|SHIFT, // W + 0x1b|SHIFT, // X + 0x1c|SHIFT, // Y + 0x1d|SHIFT, // Z + 0x2f, // [ + 0x31, // bslash + 0x30, // ] + 0x23|SHIFT, // ^ + 0x2d|SHIFT, // _ + 0x35, // ` + 0x04, // a + 0x05, // b + 0x06, // c + 0x07, // d + 0x08, // e + 0x09, // f + 0x0a, // g + 0x0b, // h + 0x0c, // i + 0x0d, // j + 0x0e, // k + 0x0f, // l + 0x10, // m + 0x11, // n + 0x12, // o + 0x13, // p + 0x14, // q + 0x15, // r + 0x16, // s + 0x17, // t + 0x18, // u + 0x19, // v + 0x1a, // w + 0x1b, // x + 0x1c, // y + 0x1d, // z + 0x2f|SHIFT, // + 0x31|SHIFT, // | + 0x30|SHIFT, // } + 0x35|SHIFT, // ~ + 0 // DEL +}; + +uint8_t USBPutChar(uint8_t c); + +// press() adds the specified key (printing, non-printing, or modifier) +// to the persistent key report and sends the report. Because of the way +// USB HID works, the host acts like the key remains pressed until we +// call release(), releaseAll(), or otherwise clear the report and resend. +size_t Keyboard_::press(uint8_t k) +{ + uint8_t i; + if (k >= 136) { // it's a non-printing key (not a modifier) + k = k - 136; + } else if (k >= 128) { // it's a modifier key + _keyReport.modifiers |= (1<<(k-128)); + k = 0; + } else { // it's a printing key + k = pgm_read_byte(_asciimap + k); + if (!k) { + setWriteError(); + return 0; + } + if (k & 0x80) { // it's a capital letter or other character reached with shift + _keyReport.modifiers |= 0x02; // the left shift modifier + k &= 0x7F; + } + } + + // Add k to the key report only if it's not already present + // and if there is an empty slot. + if (_keyReport.keys[0] != k && _keyReport.keys[1] != k && + _keyReport.keys[2] != k && _keyReport.keys[3] != k && + _keyReport.keys[4] != k && _keyReport.keys[5] != k) { + + for (i=0; i<6; i++) { + if (_keyReport.keys[i] == 0x00) { + _keyReport.keys[i] = k; + break; + } + } + if (i == 6) { + setWriteError(); + return 0; + } + } + sendReport(&_keyReport); + return 1; +} + +// release() takes the specified key out of the persistent key report and +// sends the report. This tells the OS the key is no longer pressed and that +// it shouldn't be repeated any more. +size_t Keyboard_::release(uint8_t k) +{ + uint8_t i; + if (k >= 136) { // it's a non-printing key (not a modifier) + k = k - 136; + } else if (k >= 128) { // it's a modifier key + _keyReport.modifiers &= ~(1<<(k-128)); + k = 0; + } else { // it's a printing key + k = pgm_read_byte(_asciimap + k); + if (!k) { + return 0; + } + if (k & 0x80) { // it's a capital letter or other character reached with shift + _keyReport.modifiers &= ~(0x02); // the left shift modifier + k &= 0x7F; + } + } + + // Test the key report to see if k is present. Clear it if it exists. + // Check all positions in case the key is present more than once (which it shouldn't be) + for (i=0; i<6; i++) { + if (0 != k && _keyReport.keys[i] == k) { + _keyReport.keys[i] = 0x00; + } + } + + sendReport(&_keyReport); + return 1; +} + +void Keyboard_::releaseAll(void) +{ + _keyReport.keys[0] = 0; + _keyReport.keys[1] = 0; + _keyReport.keys[2] = 0; + _keyReport.keys[3] = 0; + _keyReport.keys[4] = 0; + _keyReport.keys[5] = 0; + _keyReport.modifiers = 0; + sendReport(&_keyReport); +} + +size_t Keyboard_::write(uint8_t c) +{ + uint8_t p = press(c); // Keydown + uint8_t r = release(c); // Keyup + return (p); // just return the result of press() since release() almost always returns 1 +} + +#endif + +#endif /* if defined(USBCON) */ \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.cpp new file mode 100644 index 0000000000..794a7be898 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.cpp @@ -0,0 +1,519 @@ +/* + HardwareSerial.cpp - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus +*/ + +#include +#include +#include +#include +#include "Arduino.h" +#include "wiring_private.h" + +// this next line disables the entire HardwareSerial.cpp, +// this is so I can support Attiny series and any other chip without a uart +#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H) + +#include "HardwareSerial.h" + +/* + * on ATmega8, the uart and its bits are not numbered, so there is no "TXC0" + * definition. + */ +#if !defined(TXC0) +#if defined(TXC) +#define TXC0 TXC +#elif defined(TXC1) +// Some devices have uart1 but no uart0 +#define TXC0 TXC1 +#else +#error TXC0 not definable in HardwareSerial.h +#endif +#endif + +// Define constants and variables for buffering incoming serial data. We're +// using a ring buffer (I think), in which head is the index of the location +// to which to write the next incoming character and tail is the index of the +// location from which to read. +#if (RAMEND < 1000) + #define SERIAL_BUFFER_SIZE 16 +#else + #define SERIAL_BUFFER_SIZE 64 +#endif + +struct ring_buffer +{ + unsigned char buffer[SERIAL_BUFFER_SIZE]; + volatile unsigned int head; + volatile unsigned int tail; +}; + +#if defined(USBCON) + ring_buffer rx_buffer = { { 0 }, 0, 0}; + ring_buffer tx_buffer = { { 0 }, 0, 0}; +#endif +#if defined(UBRRH) || defined(UBRR0H) + ring_buffer rx_buffer = { { 0 }, 0, 0 }; + ring_buffer tx_buffer = { { 0 }, 0, 0 }; +#endif +#if defined(UBRR1H) + ring_buffer rx_buffer1 = { { 0 }, 0, 0 }; + ring_buffer tx_buffer1 = { { 0 }, 0, 0 }; +#endif +#if defined(UBRR2H) + ring_buffer rx_buffer2 = { { 0 }, 0, 0 }; + ring_buffer tx_buffer2 = { { 0 }, 0, 0 }; +#endif +#if defined(UBRR3H) + ring_buffer rx_buffer3 = { { 0 }, 0, 0 }; + ring_buffer tx_buffer3 = { { 0 }, 0, 0 }; +#endif + +inline void store_char(unsigned char c, ring_buffer *buffer) +{ + int i = (unsigned int)(buffer->head + 1) % SERIAL_BUFFER_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != buffer->tail) { + buffer->buffer[buffer->head] = c; + buffer->head = i; + } +} + +#if !defined(USART0_RX_vect) && defined(USART1_RX_vect) +// do nothing - on the 32u4 the first USART is USART1 +#else +#if !defined(USART_RX_vect) && !defined(SIG_USART0_RECV) && \ + !defined(SIG_UART0_RECV) && !defined(USART0_RX_vect) && \ + !defined(SIG_UART_RECV) + #error "Don't know what the Data Received vector is called for the first UART" +#else + void serialEvent() __attribute__((weak)); + void serialEvent() {} + #define serialEvent_implemented +#if defined(USART_RX_vect) + SIGNAL(USART_RX_vect) +#elif defined(SIG_USART0_RECV) + SIGNAL(SIG_USART0_RECV) +#elif defined(SIG_UART0_RECV) + SIGNAL(SIG_UART0_RECV) +#elif defined(USART0_RX_vect) + SIGNAL(USART0_RX_vect) +#elif defined(SIG_UART_RECV) + SIGNAL(SIG_UART_RECV) +#endif + { + #if defined(UDR0) + if (bit_is_clear(UCSR0A, UPE0)) { + unsigned char c = UDR0; + store_char(c, &rx_buffer); + } else { + unsigned char c = UDR0; + }; + #elif defined(UDR) + if (bit_is_clear(UCSRA, PE)) { + unsigned char c = UDR; + store_char(c, &rx_buffer); + } else { + unsigned char c = UDR; + }; + #else + #error UDR not defined + #endif + } +#endif +#endif + +#if defined(USART1_RX_vect) + void serialEvent1() __attribute__((weak)); + void serialEvent1() {} + #define serialEvent1_implemented + SIGNAL(USART1_RX_vect) + { + if (bit_is_clear(UCSR1A, UPE1)) { + unsigned char c = UDR1; + store_char(c, &rx_buffer1); + } else { + unsigned char c = UDR1; + }; + } +#elif defined(SIG_USART1_RECV) + #error SIG_USART1_RECV +#endif + +#if defined(USART2_RX_vect) && defined(UDR2) + void serialEvent2() __attribute__((weak)); + void serialEvent2() {} + #define serialEvent2_implemented + SIGNAL(USART2_RX_vect) + { + if (bit_is_clear(UCSR2A, UPE2)) { + unsigned char c = UDR2; + store_char(c, &rx_buffer2); + } else { + unsigned char c = UDR2; + }; + } +#elif defined(SIG_USART2_RECV) + #error SIG_USART2_RECV +#endif + +#if defined(USART3_RX_vect) && defined(UDR3) + void serialEvent3() __attribute__((weak)); + void serialEvent3() {} + #define serialEvent3_implemented + SIGNAL(USART3_RX_vect) + { + if (bit_is_clear(UCSR3A, UPE3)) { + unsigned char c = UDR3; + store_char(c, &rx_buffer3); + } else { + unsigned char c = UDR3; + }; + } +#elif defined(SIG_USART3_RECV) + #error SIG_USART3_RECV +#endif + +void serialEventRun(void) +{ +#ifdef serialEvent_implemented + if (Serial.available()) serialEvent(); +#endif +#ifdef serialEvent1_implemented + if (Serial1.available()) serialEvent1(); +#endif +#ifdef serialEvent2_implemented + if (Serial2.available()) serialEvent2(); +#endif +#ifdef serialEvent3_implemented + if (Serial3.available()) serialEvent3(); +#endif +} + + +#if !defined(USART0_UDRE_vect) && defined(USART1_UDRE_vect) +// do nothing - on the 32u4 the first USART is USART1 +#else +#if !defined(UART0_UDRE_vect) && !defined(UART_UDRE_vect) && !defined(USART0_UDRE_vect) && !defined(USART_UDRE_vect) + #error "Don't know what the Data Register Empty vector is called for the first UART" +#else +#if defined(UART0_UDRE_vect) +ISR(UART0_UDRE_vect) +#elif defined(UART_UDRE_vect) +ISR(UART_UDRE_vect) +#elif defined(USART0_UDRE_vect) +ISR(USART0_UDRE_vect) +#elif defined(USART_UDRE_vect) +ISR(USART_UDRE_vect) +#endif +{ + if (tx_buffer.head == tx_buffer.tail) { + // Buffer empty, so disable interrupts +#if defined(UCSR0B) + cbi(UCSR0B, UDRIE0); +#else + cbi(UCSRB, UDRIE); +#endif + } + else { + // There is more data in the output buffer. Send the next byte + unsigned char c = tx_buffer.buffer[tx_buffer.tail]; + tx_buffer.tail = (tx_buffer.tail + 1) % SERIAL_BUFFER_SIZE; + + #if defined(UDR0) + UDR0 = c; + #elif defined(UDR) + UDR = c; + #else + #error UDR not defined + #endif + } +} +#endif +#endif + +#ifdef USART1_UDRE_vect +ISR(USART1_UDRE_vect) +{ + if (tx_buffer1.head == tx_buffer1.tail) { + // Buffer empty, so disable interrupts + cbi(UCSR1B, UDRIE1); + } + else { + // There is more data in the output buffer. Send the next byte + unsigned char c = tx_buffer1.buffer[tx_buffer1.tail]; + tx_buffer1.tail = (tx_buffer1.tail + 1) % SERIAL_BUFFER_SIZE; + + UDR1 = c; + } +} +#endif + +#ifdef USART2_UDRE_vect +ISR(USART2_UDRE_vect) +{ + if (tx_buffer2.head == tx_buffer2.tail) { + // Buffer empty, so disable interrupts + cbi(UCSR2B, UDRIE2); + } + else { + // There is more data in the output buffer. Send the next byte + unsigned char c = tx_buffer2.buffer[tx_buffer2.tail]; + tx_buffer2.tail = (tx_buffer2.tail + 1) % SERIAL_BUFFER_SIZE; + + UDR2 = c; + } +} +#endif + +#ifdef USART3_UDRE_vect +ISR(USART3_UDRE_vect) +{ + if (tx_buffer3.head == tx_buffer3.tail) { + // Buffer empty, so disable interrupts + cbi(UCSR3B, UDRIE3); + } + else { + // There is more data in the output buffer. Send the next byte + unsigned char c = tx_buffer3.buffer[tx_buffer3.tail]; + tx_buffer3.tail = (tx_buffer3.tail + 1) % SERIAL_BUFFER_SIZE; + + UDR3 = c; + } +} +#endif + + +// Constructors //////////////////////////////////////////////////////////////// + +HardwareSerial::HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x) +{ + _rx_buffer = rx_buffer; + _tx_buffer = tx_buffer; + _ubrrh = ubrrh; + _ubrrl = ubrrl; + _ucsra = ucsra; + _ucsrb = ucsrb; + _ucsrc = ucsrc; + _udr = udr; + _rxen = rxen; + _txen = txen; + _rxcie = rxcie; + _udrie = udrie; + _u2x = u2x; +} + +// Public Methods ////////////////////////////////////////////////////////////// + +void HardwareSerial::begin(unsigned long baud) +{ + uint16_t baud_setting; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + +try_again: + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + if ((baud_setting > 4095) && use_u2x) + { + use_u2x = false; + goto try_again; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + transmitting = false; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); + cbi(*_ucsrb, _udrie); +} + +void HardwareSerial::begin(unsigned long baud, byte config) +{ + uint16_t baud_setting; + uint8_t current_config; + bool use_u2x = true; + +#if F_CPU == 16000000UL + // hardcoded exception for compatibility with the bootloader shipped + // with the Duemilanove and previous boards and the firmware on the 8U2 + // on the Uno and Mega 2560. + if (baud == 57600) { + use_u2x = false; + } +#endif + +try_again: + + if (use_u2x) { + *_ucsra = 1 << _u2x; + baud_setting = (F_CPU / 4 / baud - 1) / 2; + } else { + *_ucsra = 0; + baud_setting = (F_CPU / 8 / baud - 1) / 2; + } + + if ((baud_setting > 4095) && use_u2x) + { + use_u2x = false; + goto try_again; + } + + // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register) + *_ubrrh = baud_setting >> 8; + *_ubrrl = baud_setting; + + //set the data bits, parity, and stop bits +#if defined(__AVR_ATmega8__) + config |= 0x80; // select UCSRC register (shared with UBRRH) +#endif + *_ucsrc = config; + + sbi(*_ucsrb, _rxen); + sbi(*_ucsrb, _txen); + sbi(*_ucsrb, _rxcie); + cbi(*_ucsrb, _udrie); +} + +void HardwareSerial::end() +{ + // wait for transmission of outgoing data + while (_tx_buffer->head != _tx_buffer->tail) + ; + + cbi(*_ucsrb, _rxen); + cbi(*_ucsrb, _txen); + cbi(*_ucsrb, _rxcie); + cbi(*_ucsrb, _udrie); + + // clear any received data + _rx_buffer->head = _rx_buffer->tail; +} + +int HardwareSerial::available(void) +{ + return (unsigned int)(SERIAL_BUFFER_SIZE + _rx_buffer->head - _rx_buffer->tail) % SERIAL_BUFFER_SIZE; +} + +int HardwareSerial::peek(void) +{ + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + return _rx_buffer->buffer[_rx_buffer->tail]; + } +} + +int HardwareSerial::read(void) +{ + // if the head isn't ahead of the tail, we don't have any characters + if (_rx_buffer->head == _rx_buffer->tail) { + return -1; + } else { + unsigned char c = _rx_buffer->buffer[_rx_buffer->tail]; + _rx_buffer->tail = (unsigned int)(_rx_buffer->tail + 1) % SERIAL_BUFFER_SIZE; + return c; + } +} + +void HardwareSerial::flush() +{ + // UDR is kept full while the buffer is not empty, so TXC triggers when EMPTY && SENT + while (transmitting && ! (*_ucsra & _BV(TXC0))); + transmitting = false; +} + +size_t HardwareSerial::write(uint8_t c) +{ + int i = (_tx_buffer->head + 1) % SERIAL_BUFFER_SIZE; + + // If the output buffer is full, there's nothing for it other than to + // wait for the interrupt handler to empty it a bit + // ???: return 0 here instead? + while (i == _tx_buffer->tail) + ; + + _tx_buffer->buffer[_tx_buffer->head] = c; + _tx_buffer->head = i; + + sbi(*_ucsrb, _udrie); + // clear the TXC bit -- "can be cleared by writing a one to its bit location" + transmitting = true; + sbi(*_ucsra, TXC0); + + return 1; +} + +HardwareSerial::operator bool() { + return true; +} + +// Preinstantiate Objects ////////////////////////////////////////////////////// + +#if defined(UBRRH) && defined(UBRRL) + HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRRH, &UBRRL, &UCSRA, &UCSRB, &UCSRC, &UDR, RXEN, TXEN, RXCIE, UDRIE, U2X); +#elif defined(UBRR0H) && defined(UBRR0L) + HardwareSerial Serial(&rx_buffer, &tx_buffer, &UBRR0H, &UBRR0L, &UCSR0A, &UCSR0B, &UCSR0C, &UDR0, RXEN0, TXEN0, RXCIE0, UDRIE0, U2X0); +#elif defined(USBCON) + // do nothing - Serial object and buffers are initialized in CDC code +#else + #error no serial port defined (port 0) +#endif + +#if defined(UBRR1H) + HardwareSerial Serial1(&rx_buffer1, &tx_buffer1, &UBRR1H, &UBRR1L, &UCSR1A, &UCSR1B, &UCSR1C, &UDR1, RXEN1, TXEN1, RXCIE1, UDRIE1, U2X1); +#endif +#if defined(UBRR2H) + HardwareSerial Serial2(&rx_buffer2, &tx_buffer2, &UBRR2H, &UBRR2L, &UCSR2A, &UCSR2B, &UCSR2C, &UDR2, RXEN2, TXEN2, RXCIE2, UDRIE2, U2X2); +#endif +#if defined(UBRR3H) + HardwareSerial Serial3(&rx_buffer3, &tx_buffer3, &UBRR3H, &UBRR3L, &UCSR3A, &UCSR3B, &UCSR3C, &UDR3, RXEN3, TXEN3, RXCIE3, UDRIE3, U2X3); +#endif + +#endif // whole file + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.h new file mode 100644 index 0000000000..a73117f568 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/HardwareSerial.h @@ -0,0 +1,115 @@ +/* + HardwareSerial.h - Hardware serial library for Wiring + Copyright (c) 2006 Nicholas Zambetti. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 28 September 2010 by Mark Sproul + Modified 14 August 2012 by Alarus +*/ + +#ifndef HardwareSerial_h +#define HardwareSerial_h + +#include + +#include "Stream.h" + +struct ring_buffer; + +class HardwareSerial : public Stream +{ + private: + ring_buffer *_rx_buffer; + ring_buffer *_tx_buffer; + volatile uint8_t *_ubrrh; + volatile uint8_t *_ubrrl; + volatile uint8_t *_ucsra; + volatile uint8_t *_ucsrb; + volatile uint8_t *_ucsrc; + volatile uint8_t *_udr; + uint8_t _rxen; + uint8_t _txen; + uint8_t _rxcie; + uint8_t _udrie; + uint8_t _u2x; + bool transmitting; + public: + HardwareSerial(ring_buffer *rx_buffer, ring_buffer *tx_buffer, + volatile uint8_t *ubrrh, volatile uint8_t *ubrrl, + volatile uint8_t *ucsra, volatile uint8_t *ucsrb, + volatile uint8_t *ucsrc, volatile uint8_t *udr, + uint8_t rxen, uint8_t txen, uint8_t rxcie, uint8_t udrie, uint8_t u2x); + void begin(unsigned long); + void begin(unsigned long, uint8_t); + void end(); + virtual int available(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + virtual size_t write(uint8_t); + inline size_t write(unsigned long n) { return write((uint8_t)n); } + inline size_t write(long n) { return write((uint8_t)n); } + inline size_t write(unsigned int n) { return write((uint8_t)n); } + inline size_t write(int n) { return write((uint8_t)n); } + using Print::write; // pull in write(str) and write(buf, size) from Print + operator bool(); +}; + +// Define config for Serial.begin(baud, config); +#define SERIAL_5N1 0x00 +#define SERIAL_6N1 0x02 +#define SERIAL_7N1 0x04 +#define SERIAL_8N1 0x06 +#define SERIAL_5N2 0x08 +#define SERIAL_6N2 0x0A +#define SERIAL_7N2 0x0C +#define SERIAL_8N2 0x0E +#define SERIAL_5E1 0x20 +#define SERIAL_6E1 0x22 +#define SERIAL_7E1 0x24 +#define SERIAL_8E1 0x26 +#define SERIAL_5E2 0x28 +#define SERIAL_6E2 0x2A +#define SERIAL_7E2 0x2C +#define SERIAL_8E2 0x2E +#define SERIAL_5O1 0x30 +#define SERIAL_6O1 0x32 +#define SERIAL_7O1 0x34 +#define SERIAL_8O1 0x36 +#define SERIAL_5O2 0x38 +#define SERIAL_6O2 0x3A +#define SERIAL_7O2 0x3C +#define SERIAL_8O2 0x3E + +#if defined(UBRRH) || defined(UBRR0H) + extern HardwareSerial Serial; +#elif defined(USBCON) + #include "USBAPI.h" +// extern HardwareSerial Serial_; +#endif +#if defined(UBRR1H) + extern HardwareSerial Serial1; +#endif +#if defined(UBRR2H) + extern HardwareSerial Serial2; +#endif +#if defined(UBRR3H) + extern HardwareSerial Serial3; +#endif + +extern void serialEventRun(void) __attribute__((weak)); + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.cpp new file mode 100644 index 0000000000..fe3deb77a2 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.cpp @@ -0,0 +1,56 @@ + +#include +#include + +IPAddress::IPAddress() +{ + memset(_address, 0, sizeof(_address)); +} + +IPAddress::IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet) +{ + _address[0] = first_octet; + _address[1] = second_octet; + _address[2] = third_octet; + _address[3] = fourth_octet; +} + +IPAddress::IPAddress(uint32_t address) +{ + memcpy(_address, &address, sizeof(_address)); +} + +IPAddress::IPAddress(const uint8_t *address) +{ + memcpy(_address, address, sizeof(_address)); +} + +IPAddress& IPAddress::operator=(const uint8_t *address) +{ + memcpy(_address, address, sizeof(_address)); + return *this; +} + +IPAddress& IPAddress::operator=(uint32_t address) +{ + memcpy(_address, (const uint8_t *)&address, sizeof(_address)); + return *this; +} + +bool IPAddress::operator==(const uint8_t* addr) +{ + return memcmp(addr, _address, sizeof(_address)) == 0; +} + +size_t IPAddress::printTo(Print& p) const +{ + size_t n = 0; + for (int i =0; i < 3; i++) + { + n += p.print(_address[i], DEC); + n += p.print('.'); + } + n += p.print(_address[3], DEC); + return n; +} + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.h new file mode 100644 index 0000000000..2585aec0e4 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/IPAddress.h @@ -0,0 +1,76 @@ +/* + * + * MIT License: + * Copyright (c) 2011 Adrian McEwen + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * adrianm@mcqn.com 1/1/2011 + */ + +#ifndef IPAddress_h +#define IPAddress_h + +#include + +// A class to make it easier to handle and pass around IP addresses + +class IPAddress : public Printable { +private: + uint8_t _address[4]; // IPv4 address + // Access the raw byte array containing the address. Because this returns a pointer + // to the internal structure rather than a copy of the address this function should only + // be used when you know that the usage of the returned uint8_t* will be transient and not + // stored. + uint8_t* raw_address() { return _address; }; + +public: + // Constructors + IPAddress(); + IPAddress(uint8_t first_octet, uint8_t second_octet, uint8_t third_octet, uint8_t fourth_octet); + IPAddress(uint32_t address); + IPAddress(const uint8_t *address); + + // Overloaded cast operator to allow IPAddress objects to be used where a pointer + // to a four-byte uint8_t array is expected + operator uint32_t() { return *((uint32_t*)_address); }; + bool operator==(const IPAddress& addr) { return (*((uint32_t*)_address)) == (*((uint32_t*)addr._address)); }; + bool operator==(const uint8_t* addr); + + // Overloaded index operator to allow getting and setting individual octets of the address + uint8_t operator[](int index) const { return _address[index]; }; + uint8_t& operator[](int index) { return _address[index]; }; + + // Overloaded copy operators to allow initialisation of IPAddress objects from other types + IPAddress& operator=(const uint8_t *address); + IPAddress& operator=(uint32_t address); + + virtual size_t printTo(Print& p) const; + + friend class EthernetClass; + friend class UDP; + friend class Client; + friend class Server; + friend class DhcpClass; + friend class DNSClient; +}; + +const IPAddress INADDR_NONE(0,0,0,0); + + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Platform.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Platform.h new file mode 100644 index 0000000000..8b8f742771 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Platform.h @@ -0,0 +1,23 @@ + +#ifndef __PLATFORM_H__ +#define __PLATFORM_H__ + +#include +#include +#include +#include +#include + +typedef unsigned char u8; +typedef unsigned short u16; +typedef unsigned long u32; + +#include "Arduino.h" + +#if defined(USBCON) + #include "USBDesc.h" + #include "USBCore.h" + #include "USBAPI.h" +#endif /* if defined(USBCON) */ + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.cpp new file mode 100644 index 0000000000..53961ec478 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.cpp @@ -0,0 +1,268 @@ +/* + Print.cpp - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Modified 23 November 2006 by David A. Mellis + */ + +#include +#include +#include +#include +#include "Arduino.h" + +#include "Print.h" + +// Public Methods ////////////////////////////////////////////////////////////// + +/* default implementation: may be overridden */ +size_t Print::write(const uint8_t *buffer, size_t size) +{ + size_t n = 0; + while (size--) { + n += write(*buffer++); + } + return n; +} + +size_t Print::print(const __FlashStringHelper *ifsh) +{ + const char PROGMEM *p = (const char PROGMEM *)ifsh; + size_t n = 0; + while (1) { + unsigned char c = pgm_read_byte(p++); + if (c == 0) break; + n += write(c); + } + return n; +} + +size_t Print::print(const String &s) +{ + size_t n = 0; + for (uint16_t i = 0; i < s.length(); i++) { + n += write(s[i]); + } + return n; +} + +size_t Print::print(const char str[]) +{ + return write(str); +} + +size_t Print::print(char c) +{ + return write(c); +} + +size_t Print::print(unsigned char b, int base) +{ + return print((unsigned long) b, base); +} + +size_t Print::print(int n, int base) +{ + return print((long) n, base); +} + +size_t Print::print(unsigned int n, int base) +{ + return print((unsigned long) n, base); +} + +size_t Print::print(long n, int base) +{ + if (base == 0) { + return write(n); + } else if (base == 10) { + if (n < 0) { + int t = print('-'); + n = -n; + return printNumber(n, 10) + t; + } + return printNumber(n, 10); + } else { + return printNumber(n, base); + } +} + +size_t Print::print(unsigned long n, int base) +{ + if (base == 0) return write(n); + else return printNumber(n, base); +} + +size_t Print::print(double n, int digits) +{ + return printFloat(n, digits); +} + +size_t Print::println(const __FlashStringHelper *ifsh) +{ + size_t n = print(ifsh); + n += println(); + return n; +} + +size_t Print::print(const Printable& x) +{ + return x.printTo(*this); +} + +size_t Print::println(void) +{ + size_t n = print('\r'); + n += print('\n'); + return n; +} + +size_t Print::println(const String &s) +{ + size_t n = print(s); + n += println(); + return n; +} + +size_t Print::println(const char c[]) +{ + size_t n = print(c); + n += println(); + return n; +} + +size_t Print::println(char c) +{ + size_t n = print(c); + n += println(); + return n; +} + +size_t Print::println(unsigned char b, int base) +{ + size_t n = print(b, base); + n += println(); + return n; +} + +size_t Print::println(int num, int base) +{ + size_t n = print(num, base); + n += println(); + return n; +} + +size_t Print::println(unsigned int num, int base) +{ + size_t n = print(num, base); + n += println(); + return n; +} + +size_t Print::println(long num, int base) +{ + size_t n = print(num, base); + n += println(); + return n; +} + +size_t Print::println(unsigned long num, int base) +{ + size_t n = print(num, base); + n += println(); + return n; +} + +size_t Print::println(double num, int digits) +{ + size_t n = print(num, digits); + n += println(); + return n; +} + +size_t Print::println(const Printable& x) +{ + size_t n = print(x); + n += println(); + return n; +} + +// Private Methods ///////////////////////////////////////////////////////////// + +size_t Print::printNumber(unsigned long n, uint8_t base) { + char buf[8 * sizeof(long) + 1]; // Assumes 8-bit chars plus zero byte. + char *str = &buf[sizeof(buf) - 1]; + + *str = '\0'; + + // prevent crash if called with base == 1 + if (base < 2) base = 10; + + do { + unsigned long m = n; + n /= base; + char c = m - base * n; + *--str = c < 10 ? c + '0' : c + 'A' - 10; + } while(n); + + return write(str); +} + +size_t Print::printFloat(double number, uint8_t digits) +{ + size_t n = 0; + + if (isnan(number)) return print("nan"); + if (isinf(number)) return print("inf"); + if (number > 4294967040.0) return print ("ovf"); // constant determined empirically + if (number <-4294967040.0) return print ("ovf"); // constant determined empirically + + // Handle negative numbers + if (number < 0.0) + { + n += print('-'); + number = -number; + } + + // Round correctly so that print(1.999, 2) prints as "2.00" + double rounding = 0.5; + for (uint8_t i=0; i 0) { + n += print("."); + } + + // Extract digits from the remainder one at a time + while (digits-- > 0) + { + remainder *= 10.0; + int toPrint = int(remainder); + n += print(toPrint); + remainder -= toPrint; + } + + return n; +} diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.h new file mode 100644 index 0000000000..dc76150871 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Print.h @@ -0,0 +1,81 @@ +/* + Print.h - Base class that provides print() and println() + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Print_h +#define Print_h + +#include +#include // for size_t + +#include "WString.h" +#include "Printable.h" + +#define DEC 10 +#define HEX 16 +#define OCT 8 +#define BIN 2 + +class Print +{ + private: + int write_error; + size_t printNumber(unsigned long, uint8_t); + size_t printFloat(double, uint8_t); + protected: + void setWriteError(int err = 1) { write_error = err; } + public: + Print() : write_error(0) {} + + int getWriteError() { return write_error; } + void clearWriteError() { setWriteError(0); } + + virtual size_t write(uint8_t) = 0; + size_t write(const char *str) { + if (str == NULL) return 0; + return write((const uint8_t *)str, strlen(str)); + } + virtual size_t write(const uint8_t *buffer, size_t size); + + size_t print(const __FlashStringHelper *); + size_t print(const String &); + size_t print(const char[]); + size_t print(char); + size_t print(unsigned char, int = DEC); + size_t print(int, int = DEC); + size_t print(unsigned int, int = DEC); + size_t print(long, int = DEC); + size_t print(unsigned long, int = DEC); + size_t print(double, int = 2); + size_t print(const Printable&); + + size_t println(const __FlashStringHelper *); + size_t println(const String &s); + size_t println(const char[]); + size_t println(char); + size_t println(unsigned char, int = DEC); + size_t println(int, int = DEC); + size_t println(unsigned int, int = DEC); + size_t println(long, int = DEC); + size_t println(unsigned long, int = DEC); + size_t println(double, int = 2); + size_t println(const Printable&); + size_t println(void); +}; + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Printable.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Printable.h new file mode 100644 index 0000000000..d03c9af62c --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Printable.h @@ -0,0 +1,40 @@ +/* + Printable.h - Interface class that allows printing of complex types + Copyright (c) 2011 Adrian McEwen. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef Printable_h +#define Printable_h + +#include + +class Print; + +/** The Printable class provides a way for new classes to allow themselves to be printed. + By deriving from Printable and implementing the printTo method, it will then be possible + for users to print out instances of this class by passing them into the usual + Print::print and Print::println methods. +*/ + +class Printable +{ + public: + virtual size_t printTo(Print& p) const = 0; +}; + +#endif + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Server.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Server.h new file mode 100644 index 0000000000..9674c76269 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Server.h @@ -0,0 +1,9 @@ +#ifndef server_h +#define server_h + +class Server : public Print { +public: + virtual void begin() =0; +}; + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.cpp new file mode 100644 index 0000000000..aafb7fcf97 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.cpp @@ -0,0 +1,270 @@ +/* + Stream.cpp - adds parsing methods to Stream class + Copyright (c) 2008 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + Created July 2011 + parsing functions based on TextFinder library by Michael Margolis + */ + +#include "Arduino.h" +#include "Stream.h" + +#define PARSE_TIMEOUT 1000 // default number of milli-seconds to wait +#define NO_SKIP_CHAR 1 // a magic char not found in a valid ASCII numeric field + +// private method to read stream with timeout +int Stream::timedRead() +{ + int c; + _startMillis = millis(); + do { + c = read(); + if (c >= 0) return c; + } while(millis() - _startMillis < _timeout); + return -1; // -1 indicates timeout +} + +// private method to peek stream with timeout +int Stream::timedPeek() +{ + int c; + _startMillis = millis(); + do { + c = peek(); + if (c >= 0) return c; + } while(millis() - _startMillis < _timeout); + return -1; // -1 indicates timeout +} + +// returns peek of the next digit in the stream or -1 if timeout +// discards non-numeric characters +int Stream::peekNextDigit() +{ + int c; + while (1) { + c = timedPeek(); + if (c < 0) return c; // timeout + if (c == '-') return c; + if (c >= '0' && c <= '9') return c; + read(); // discard non-numeric + } +} + +// Public Methods +////////////////////////////////////////////////////////////// + +void Stream::setTimeout(unsigned long timeout) // sets the maximum number of milliseconds to wait +{ + _timeout = timeout; +} + + // find returns true if the target string is found +bool Stream::find(char *target) +{ + return findUntil(target, NULL); +} + +// reads data from the stream until the target string of given length is found +// returns true if target string is found, false if timed out +bool Stream::find(char *target, size_t length) +{ + return findUntil(target, length, NULL, 0); +} + +// as find but search ends if the terminator string is found +bool Stream::findUntil(char *target, char *terminator) +{ + return findUntil(target, strlen(target), terminator, strlen(terminator)); +} + +// reads data from the stream until the target string of the given length is found +// search terminated if the terminator string is found +// returns true if target string is found, false if terminated or timed out +bool Stream::findUntil(char *target, size_t targetLen, char *terminator, size_t termLen) +{ + size_t index = 0; // maximum target string length is 64k bytes! + size_t termIndex = 0; + int c; + + if( *target == 0) + return true; // return true if target is a null string + while( (c = timedRead()) > 0){ + + if(c != target[index]) + index = 0; // reset index if any char does not match + + if( c == target[index]){ + //////Serial.print("found "); Serial.write(c); Serial.print("index now"); Serial.println(index+1); + if(++index >= targetLen){ // return true if all chars in the target match + return true; + } + } + + if(termLen > 0 && c == terminator[termIndex]){ + if(++termIndex >= termLen) + return false; // return false if terminate string found before target string + } + else + termIndex = 0; + } + return false; +} + + +// returns the first valid (long) integer value from the current position. +// initial characters that are not digits (or the minus sign) are skipped +// function is terminated by the first character that is not a digit. +long Stream::parseInt() +{ + return parseInt(NO_SKIP_CHAR); // terminate on first non-digit character (or timeout) +} + +// as above but a given skipChar is ignored +// this allows format characters (typically commas) in values to be ignored +long Stream::parseInt(char skipChar) +{ + boolean isNegative = false; + long value = 0; + int c; + + c = peekNextDigit(); + // ignore non numeric leading characters + if(c < 0) + return 0; // zero returned if timeout + + do{ + if(c == skipChar) + ; // ignore this charactor + else if(c == '-') + isNegative = true; + else if(c >= '0' && c <= '9') // is c a digit? + value = value * 10 + c - '0'; + read(); // consume the character we got with peek + c = timedPeek(); + } + while( (c >= '0' && c <= '9') || c == skipChar ); + + if(isNegative) + value = -value; + return value; +} + + +// as parseInt but returns a floating point value +float Stream::parseFloat() +{ + return parseFloat(NO_SKIP_CHAR); +} + +// as above but the given skipChar is ignored +// this allows format characters (typically commas) in values to be ignored +float Stream::parseFloat(char skipChar){ + boolean isNegative = false; + boolean isFraction = false; + long value = 0; + char c; + float fraction = 1.0; + + c = peekNextDigit(); + // ignore non numeric leading characters + if(c < 0) + return 0; // zero returned if timeout + + do{ + if(c == skipChar) + ; // ignore + else if(c == '-') + isNegative = true; + else if (c == '.') + isFraction = true; + else if(c >= '0' && c <= '9') { // is c a digit? + value = value * 10 + c - '0'; + if(isFraction) + fraction *= 0.1; + } + read(); // consume the character we got with peek + c = timedPeek(); + } + while( (c >= '0' && c <= '9') || c == '.' || c == skipChar ); + + if(isNegative) + value = -value; + if(isFraction) + return value * fraction; + else + return value; +} + +// read characters from stream into buffer +// terminates if length characters have been read, or timeout (see setTimeout) +// returns the number of characters placed in the buffer +// the buffer is NOT null terminated. +// +size_t Stream::readBytes(char *buffer, size_t length) +{ + size_t count = 0; + while (count < length) { + int c = timedRead(); + if (c < 0) break; + *buffer++ = (char)c; + count++; + } + return count; +} + + +// as readBytes with terminator character +// terminates if length characters have been read, timeout, or if the terminator character detected +// returns the number of characters placed in the buffer (0 means no valid data found) + +size_t Stream::readBytesUntil(char terminator, char *buffer, size_t length) +{ + if (length < 1) return 0; + size_t index = 0; + while (index < length) { + int c = timedRead(); + if (c < 0 || c == terminator) break; + *buffer++ = (char)c; + index++; + } + return index; // return number of characters, not including null terminator +} + +String Stream::readString() +{ + String ret; + int c = timedRead(); + while (c >= 0) + { + ret += (char)c; + c = timedRead(); + } + return ret; +} + +String Stream::readStringUntil(char terminator) +{ + String ret; + int c = timedRead(); + while (c >= 0 && c != terminator) + { + ret += (char)c; + c = timedRead(); + } + return ret; +} + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.h new file mode 100644 index 0000000000..58bbf752f3 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Stream.h @@ -0,0 +1,96 @@ +/* + Stream.h - base class for character-based streams. + Copyright (c) 2010 David A. Mellis. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + + parsing functions based on TextFinder library by Michael Margolis +*/ + +#ifndef Stream_h +#define Stream_h + +#include +#include "Print.h" + +// compatability macros for testing +/* +#define getInt() parseInt() +#define getInt(skipChar) parseInt(skipchar) +#define getFloat() parseFloat() +#define getFloat(skipChar) parseFloat(skipChar) +#define getString( pre_string, post_string, buffer, length) +readBytesBetween( pre_string, terminator, buffer, length) +*/ + +class Stream : public Print +{ + private: + unsigned long _timeout; // number of milliseconds to wait for the next char before aborting timed read + unsigned long _startMillis; // used for timeout measurement + int timedRead(); // private method to read stream with timeout + int timedPeek(); // private method to peek stream with timeout + int peekNextDigit(); // returns the next numeric digit in the stream or -1 if timeout + + public: + virtual int available() = 0; + virtual int read() = 0; + virtual int peek() = 0; + virtual void flush() = 0; + + Stream() {_timeout=1000;} + +// parsing methods + + void setTimeout(unsigned long timeout); // sets maximum milliseconds to wait for stream data, default is 1 second + + bool find(char *target); // reads data from the stream until the target string is found + // returns true if target string is found, false if timed out (see setTimeout) + + bool find(char *target, size_t length); // reads data from the stream until the target string of given length is found + // returns true if target string is found, false if timed out + + bool findUntil(char *target, char *terminator); // as find but search ends if the terminator string is found + + bool findUntil(char *target, size_t targetLen, char *terminate, size_t termLen); // as above but search ends if the terminate string is found + + + long parseInt(); // returns the first valid (long) integer value from the current position. + // initial characters that are not digits (or the minus sign) are skipped + // integer is terminated by the first character that is not a digit. + + float parseFloat(); // float version of parseInt + + size_t readBytes( char *buffer, size_t length); // read chars from stream into buffer + // terminates if length characters have been read or timeout (see setTimeout) + // returns the number of characters placed in the buffer (0 means no valid data found) + + size_t readBytesUntil( char terminator, char *buffer, size_t length); // as readBytes with terminator character + // terminates if length characters have been read, timeout, or if the terminator character detected + // returns the number of characters placed in the buffer (0 means no valid data found) + + // Arduino String functions to be added here + String readString(); + String readStringUntil(char terminator); + + protected: + long parseInt(char skipChar); // as above but the given skipChar is ignored + // as above but the given skipChar is ignored + // this allows format characters (typically commas) in values to be ignored + + float parseFloat(char skipChar); // as above but the given skipChar is ignored +}; + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Tone.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Tone.cpp new file mode 100644 index 0000000000..9bb6fe721c --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Tone.cpp @@ -0,0 +1,616 @@ +/* Tone.cpp + + A Tone Generator Library + + Written by Brett Hagman + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +Version Modified By Date Comments +------- ----------- -------- -------- +0001 B Hagman 09/08/02 Initial coding +0002 B Hagman 09/08/18 Multiple pins +0003 B Hagman 09/08/18 Moved initialization from constructor to begin() +0004 B Hagman 09/09/26 Fixed problems with ATmega8 +0005 B Hagman 09/11/23 Scanned prescalars for best fit on 8 bit timers + 09/11/25 Changed pin toggle method to XOR + 09/11/25 Fixed timer0 from being excluded +0006 D Mellis 09/12/29 Replaced objects with functions +0007 M Sproul 10/08/29 Changed #ifdefs from cpu to register +0008 S Kanemoto 12/06/22 Fixed for Leonardo by @maris_HY +*************************************************/ + +#include +#include +#include "Arduino.h" +#include "pins_arduino.h" + +#if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__) +#define TCCR2A TCCR2 +#define TCCR2B TCCR2 +#define COM2A1 COM21 +#define COM2A0 COM20 +#define OCR2A OCR2 +#define TIMSK2 TIMSK +#define OCIE2A OCIE2 +#define TIMER2_COMPA_vect TIMER2_COMP_vect +#define TIMSK1 TIMSK +#endif + +// timerx_toggle_count: +// > 0 - duration specified +// = 0 - stopped +// < 0 - infinitely (until stop() method called, or new play() called) + +#if !defined(__AVR_ATmega8__) +volatile long timer0_toggle_count; +volatile uint8_t *timer0_pin_port; +volatile uint8_t timer0_pin_mask; +#endif + +volatile long timer1_toggle_count; +volatile uint8_t *timer1_pin_port; +volatile uint8_t timer1_pin_mask; +volatile long timer2_toggle_count; +volatile uint8_t *timer2_pin_port; +volatile uint8_t timer2_pin_mask; + +#if defined(TIMSK3) +volatile long timer3_toggle_count; +volatile uint8_t *timer3_pin_port; +volatile uint8_t timer3_pin_mask; +#endif + +#if defined(TIMSK4) +volatile long timer4_toggle_count; +volatile uint8_t *timer4_pin_port; +volatile uint8_t timer4_pin_mask; +#endif + +#if defined(TIMSK5) +volatile long timer5_toggle_count; +volatile uint8_t *timer5_pin_port; +volatile uint8_t timer5_pin_mask; +#endif + + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + +#define AVAILABLE_TONE_PINS 1 +#define USE_TIMER2 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 3, 4, 5, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255, 255, 255, 255 */ }; + +#elif defined(__AVR_ATmega8__) + +#define AVAILABLE_TONE_PINS 1 +#define USE_TIMER2 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#elif defined(__AVR_ATmega32U4__) + +#define AVAILABLE_TONE_PINS 1 +#define USE_TIMER3 + +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 3 /*, 1 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255 */ }; + +#else + +#define AVAILABLE_TONE_PINS 1 +#define USE_TIMER2 + +// Leave timer 0 to last. +const uint8_t PROGMEM tone_pin_to_timer_PGM[] = { 2 /*, 1, 0 */ }; +static uint8_t tone_pins[AVAILABLE_TONE_PINS] = { 255 /*, 255, 255 */ }; + +#endif + + + +static int8_t toneBegin(uint8_t _pin) +{ + int8_t _timer = -1; + + // if we're already using the pin, the timer should be configured. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + return pgm_read_byte(tone_pin_to_timer_PGM + i); + } + } + + // search for an unused timer. + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == 255) { + tone_pins[i] = _pin; + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + break; + } + } + + if (_timer != -1) + { + // Set timer specific stuff + // All timers in CTC mode + // 8 bit timers will require changing prescalar values, + // whereas 16 bit timers are set to either ck/1 or ck/64 prescalar + switch (_timer) + { + #if defined(TCCR0A) && defined(TCCR0B) + case 0: + // 8 bit timer + TCCR0A = 0; + TCCR0B = 0; + bitWrite(TCCR0A, WGM01, 1); + bitWrite(TCCR0B, CS00, 1); + timer0_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer0_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR1A) && defined(TCCR1B) && defined(WGM12) + case 1: + // 16 bit timer + TCCR1A = 0; + TCCR1B = 0; + bitWrite(TCCR1B, WGM12, 1); + bitWrite(TCCR1B, CS10, 1); + timer1_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer1_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR2A) && defined(TCCR2B) + case 2: + // 8 bit timer + TCCR2A = 0; + TCCR2B = 0; + bitWrite(TCCR2A, WGM21, 1); + bitWrite(TCCR2B, CS20, 1); + timer2_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer2_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR3A) && defined(TCCR3B) && defined(TIMSK3) + case 3: + // 16 bit timer + TCCR3A = 0; + TCCR3B = 0; + bitWrite(TCCR3B, WGM32, 1); + bitWrite(TCCR3B, CS30, 1); + timer3_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer3_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR4A) && defined(TCCR4B) && defined(TIMSK4) + case 4: + // 16 bit timer + TCCR4A = 0; + TCCR4B = 0; + #if defined(WGM42) + bitWrite(TCCR4B, WGM42, 1); + #elif defined(CS43) + #warning this may not be correct + // atmega32u4 + bitWrite(TCCR4B, CS43, 1); + #endif + bitWrite(TCCR4B, CS40, 1); + timer4_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer4_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + + #if defined(TCCR5A) && defined(TCCR5B) && defined(TIMSK5) + case 5: + // 16 bit timer + TCCR5A = 0; + TCCR5B = 0; + bitWrite(TCCR5B, WGM52, 1); + bitWrite(TCCR5B, CS50, 1); + timer5_pin_port = portOutputRegister(digitalPinToPort(_pin)); + timer5_pin_mask = digitalPinToBitMask(_pin); + break; + #endif + } + } + + return _timer; +} + + + +// frequency (in hertz) and duration (in milliseconds). + +void tone(uint8_t _pin, unsigned int frequency, unsigned long duration) +{ + uint8_t prescalarbits = 0b001; + long toggle_count = 0; + uint32_t ocr = 0; + int8_t _timer; + + _timer = toneBegin(_pin); + + if (_timer >= 0) + { + // Set the pinMode as OUTPUT + pinMode(_pin, OUTPUT); + + // if we are using an 8 bit timer, scan through prescalars to find the best fit + if (_timer == 0 || _timer == 2) + { + ocr = F_CPU / frequency / 2 - 1; + prescalarbits = 0b001; // ck/1: same for both timers + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 8 - 1; + prescalarbits = 0b010; // ck/8: same for both timers + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 32 - 1; + prescalarbits = 0b011; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = _timer == 0 ? 0b011 : 0b100; + + if (_timer == 2 && ocr > 255) + { + ocr = F_CPU / frequency / 2 / 128 - 1; + prescalarbits = 0b101; + } + + if (ocr > 255) + { + ocr = F_CPU / frequency / 2 / 256 - 1; + prescalarbits = _timer == 0 ? 0b100 : 0b110; + if (ocr > 255) + { + // can't do any better than /1024 + ocr = F_CPU / frequency / 2 / 1024 - 1; + prescalarbits = _timer == 0 ? 0b101 : 0b111; + } + } + } + } + +#if defined(TCCR0B) + if (_timer == 0) + { + TCCR0B = prescalarbits; + } + else +#endif +#if defined(TCCR2B) + { + TCCR2B = prescalarbits; + } +#else + { + // dummy place holder to make the above ifdefs work + } +#endif + } + else + { + // two choices for the 16 bit timers: ck/1 or ck/64 + ocr = F_CPU / frequency / 2 - 1; + + prescalarbits = 0b001; + if (ocr > 0xffff) + { + ocr = F_CPU / frequency / 2 / 64 - 1; + prescalarbits = 0b011; + } + + if (_timer == 1) + { +#if defined(TCCR1B) + TCCR1B = (TCCR1B & 0b11111000) | prescalarbits; +#endif + } +#if defined(TCCR3B) + else if (_timer == 3) + TCCR3B = (TCCR3B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR4B) + else if (_timer == 4) + TCCR4B = (TCCR4B & 0b11111000) | prescalarbits; +#endif +#if defined(TCCR5B) + else if (_timer == 5) + TCCR5B = (TCCR5B & 0b11111000) | prescalarbits; +#endif + + } + + + // Calculate the toggle count + if (duration > 0) + { + toggle_count = 2 * frequency * duration / 1000; + } + else + { + toggle_count = -1; + } + + // Set the OCR for the given timer, + // set the toggle count, + // then turn on the interrupts + switch (_timer) + { + +#if defined(OCR0A) && defined(TIMSK0) && defined(OCIE0A) + case 0: + OCR0A = ocr; + timer0_toggle_count = toggle_count; + bitWrite(TIMSK0, OCIE0A, 1); + break; +#endif + + case 1: +#if defined(OCR1A) && defined(TIMSK1) && defined(OCIE1A) + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK1, OCIE1A, 1); +#elif defined(OCR1A) && defined(TIMSK) && defined(OCIE1A) + // this combination is for at least the ATmega32 + OCR1A = ocr; + timer1_toggle_count = toggle_count; + bitWrite(TIMSK, OCIE1A, 1); +#endif + break; + +#if defined(OCR2A) && defined(TIMSK2) && defined(OCIE2A) + case 2: + OCR2A = ocr; + timer2_toggle_count = toggle_count; + bitWrite(TIMSK2, OCIE2A, 1); + break; +#endif + +#if defined(TIMSK3) + case 3: + OCR3A = ocr; + timer3_toggle_count = toggle_count; + bitWrite(TIMSK3, OCIE3A, 1); + break; +#endif + +#if defined(TIMSK4) + case 4: + OCR4A = ocr; + timer4_toggle_count = toggle_count; + bitWrite(TIMSK4, OCIE4A, 1); + break; +#endif + +#if defined(OCR5A) && defined(TIMSK5) && defined(OCIE5A) + case 5: + OCR5A = ocr; + timer5_toggle_count = toggle_count; + bitWrite(TIMSK5, OCIE5A, 1); + break; +#endif + + } + } +} + + +// XXX: this function only works properly for timer 2 (the only one we use +// currently). for the others, it should end the tone, but won't restore +// proper PWM functionality for the timer. +void disableTimer(uint8_t _timer) +{ + switch (_timer) + { + case 0: + #if defined(TIMSK0) + TIMSK0 = 0; + #elif defined(TIMSK) + TIMSK = 0; // atmega32 + #endif + break; + +#if defined(TIMSK1) && defined(OCIE1A) + case 1: + bitWrite(TIMSK1, OCIE1A, 0); + break; +#endif + + case 2: + #if defined(TIMSK2) && defined(OCIE2A) + bitWrite(TIMSK2, OCIE2A, 0); // disable interrupt + #endif + #if defined(TCCR2A) && defined(WGM20) + TCCR2A = (1 << WGM20); + #endif + #if defined(TCCR2B) && defined(CS22) + TCCR2B = (TCCR2B & 0b11111000) | (1 << CS22); + #endif + #if defined(OCR2A) + OCR2A = 0; + #endif + break; + +#if defined(TIMSK3) + case 3: + TIMSK3 = 0; + break; +#endif + +#if defined(TIMSK4) + case 4: + TIMSK4 = 0; + break; +#endif + +#if defined(TIMSK5) + case 5: + TIMSK5 = 0; + break; +#endif + } +} + + +void noTone(uint8_t _pin) +{ + int8_t _timer = -1; + + for (int i = 0; i < AVAILABLE_TONE_PINS; i++) { + if (tone_pins[i] == _pin) { + _timer = pgm_read_byte(tone_pin_to_timer_PGM + i); + tone_pins[i] = 255; + } + } + + disableTimer(_timer); + + digitalWrite(_pin, 0); +} + +#ifdef USE_TIMER0 +ISR(TIMER0_COMPA_vect) +{ + if (timer0_toggle_count != 0) + { + // toggle the pin + *timer0_pin_port ^= timer0_pin_mask; + + if (timer0_toggle_count > 0) + timer0_toggle_count--; + } + else + { + disableTimer(0); + *timer0_pin_port &= ~(timer0_pin_mask); // keep pin low after stop + } +} +#endif + + +#ifdef USE_TIMER1 +ISR(TIMER1_COMPA_vect) +{ + if (timer1_toggle_count != 0) + { + // toggle the pin + *timer1_pin_port ^= timer1_pin_mask; + + if (timer1_toggle_count > 0) + timer1_toggle_count--; + } + else + { + disableTimer(1); + *timer1_pin_port &= ~(timer1_pin_mask); // keep pin low after stop + } +} +#endif + + +#ifdef USE_TIMER2 +ISR(TIMER2_COMPA_vect) +{ + + if (timer2_toggle_count != 0) + { + // toggle the pin + *timer2_pin_port ^= timer2_pin_mask; + + if (timer2_toggle_count > 0) + timer2_toggle_count--; + } + else + { + // need to call noTone() so that the tone_pins[] entry is reset, so the + // timer gets initialized next time we call tone(). + // XXX: this assumes timer 2 is always the first one used. + noTone(tone_pins[0]); +// disableTimer(2); +// *timer2_pin_port &= ~(timer2_pin_mask); // keep pin low after stop + } +} +#endif + + +#ifdef USE_TIMER3 +ISR(TIMER3_COMPA_vect) +{ + if (timer3_toggle_count != 0) + { + // toggle the pin + *timer3_pin_port ^= timer3_pin_mask; + + if (timer3_toggle_count > 0) + timer3_toggle_count--; + } + else + { + disableTimer(3); + *timer3_pin_port &= ~(timer3_pin_mask); // keep pin low after stop + } +} +#endif + + +#ifdef USE_TIMER4 +ISR(TIMER4_COMPA_vect) +{ + if (timer4_toggle_count != 0) + { + // toggle the pin + *timer4_pin_port ^= timer4_pin_mask; + + if (timer4_toggle_count > 0) + timer4_toggle_count--; + } + else + { + disableTimer(4); + *timer4_pin_port &= ~(timer4_pin_mask); // keep pin low after stop + } +} +#endif + + +#ifdef USE_TIMER5 +ISR(TIMER5_COMPA_vect) +{ + if (timer5_toggle_count != 0) + { + // toggle the pin + *timer5_pin_port ^= timer5_pin_mask; + + if (timer5_toggle_count > 0) + timer5_toggle_count--; + } + else + { + disableTimer(5); + *timer5_pin_port &= ~(timer5_pin_mask); // keep pin low after stop + } +} +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBAPI.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBAPI.h new file mode 100644 index 0000000000..eb2e5937db --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBAPI.h @@ -0,0 +1,196 @@ + + +#ifndef __USBAPI__ +#define __USBAPI__ + +#if defined(USBCON) + +//================================================================================ +//================================================================================ +// USB + +class USBDevice_ +{ +public: + USBDevice_(); + bool configured(); + + void attach(); + void detach(); // Serial port goes down too... + void poll(); +}; +extern USBDevice_ USBDevice; + +//================================================================================ +//================================================================================ +// Serial over CDC (Serial1 is the physical port) + +class Serial_ : public Stream +{ +private: + ring_buffer *_cdc_rx_buffer; +public: + void begin(uint16_t baud_count); + void end(void); + + virtual int available(void); + virtual void accept(void); + virtual int peek(void); + virtual int read(void); + virtual void flush(void); + virtual size_t write(uint8_t); + using Print::write; // pull in write(str) and write(buf, size) from Print + operator bool(); +}; +extern Serial_ Serial; + +//================================================================================ +//================================================================================ +// Mouse + +#define MOUSE_LEFT 1 +#define MOUSE_RIGHT 2 +#define MOUSE_MIDDLE 4 +#define MOUSE_ALL (MOUSE_LEFT | MOUSE_RIGHT | MOUSE_MIDDLE) + +class Mouse_ +{ +private: + uint8_t _buttons; + void buttons(uint8_t b); +public: + Mouse_(void); + void begin(void); + void end(void); + void click(uint8_t b = MOUSE_LEFT); + void move(signed char x, signed char y, signed char wheel = 0); + void press(uint8_t b = MOUSE_LEFT); // press LEFT by default + void release(uint8_t b = MOUSE_LEFT); // release LEFT by default + bool isPressed(uint8_t b = MOUSE_LEFT); // check LEFT by default +}; +extern Mouse_ Mouse; + +//================================================================================ +//================================================================================ +// Keyboard + +#define KEY_LEFT_CTRL 0x80 +#define KEY_LEFT_SHIFT 0x81 +#define KEY_LEFT_ALT 0x82 +#define KEY_LEFT_GUI 0x83 +#define KEY_RIGHT_CTRL 0x84 +#define KEY_RIGHT_SHIFT 0x85 +#define KEY_RIGHT_ALT 0x86 +#define KEY_RIGHT_GUI 0x87 + +#define KEY_UP_ARROW 0xDA +#define KEY_DOWN_ARROW 0xD9 +#define KEY_LEFT_ARROW 0xD8 +#define KEY_RIGHT_ARROW 0xD7 +#define KEY_BACKSPACE 0xB2 +#define KEY_TAB 0xB3 +#define KEY_RETURN 0xB0 +#define KEY_ESC 0xB1 +#define KEY_INSERT 0xD1 +#define KEY_DELETE 0xD4 +#define KEY_PAGE_UP 0xD3 +#define KEY_PAGE_DOWN 0xD6 +#define KEY_HOME 0xD2 +#define KEY_END 0xD5 +#define KEY_CAPS_LOCK 0xC1 +#define KEY_F1 0xC2 +#define KEY_F2 0xC3 +#define KEY_F3 0xC4 +#define KEY_F4 0xC5 +#define KEY_F5 0xC6 +#define KEY_F6 0xC7 +#define KEY_F7 0xC8 +#define KEY_F8 0xC9 +#define KEY_F9 0xCA +#define KEY_F10 0xCB +#define KEY_F11 0xCC +#define KEY_F12 0xCD + +// Low level key report: up to 6 keys and shift, ctrl etc at once +typedef struct +{ + uint8_t modifiers; + uint8_t reserved; + uint8_t keys[6]; +} KeyReport; + +class Keyboard_ : public Print +{ +private: + KeyReport _keyReport; + void sendReport(KeyReport* keys); +public: + Keyboard_(void); + void begin(void); + void end(void); + virtual size_t write(uint8_t k); + virtual size_t press(uint8_t k); + virtual size_t release(uint8_t k); + virtual void releaseAll(void); +}; +extern Keyboard_ Keyboard; + +//================================================================================ +//================================================================================ +// Low level API + +typedef struct +{ + uint8_t bmRequestType; + uint8_t bRequest; + uint8_t wValueL; + uint8_t wValueH; + uint16_t wIndex; + uint16_t wLength; +} Setup; + +//================================================================================ +//================================================================================ +// HID 'Driver' + +int HID_GetInterface(uint8_t* interfaceNum); +int HID_GetDescriptor(int i); +bool HID_Setup(Setup& setup); +void HID_SendReport(uint8_t id, const void* data, int len); + +//================================================================================ +//================================================================================ +// MSC 'Driver' + +int MSC_GetInterface(uint8_t* interfaceNum); +int MSC_GetDescriptor(int i); +bool MSC_Setup(Setup& setup); +bool MSC_Data(uint8_t rx,uint8_t tx); + +//================================================================================ +//================================================================================ +// CSC 'Driver' + +int CDC_GetInterface(uint8_t* interfaceNum); +int CDC_GetDescriptor(int i); +bool CDC_Setup(Setup& setup); + +//================================================================================ +//================================================================================ + +#define TRANSFER_PGM 0x80 +#define TRANSFER_RELEASE 0x40 +#define TRANSFER_ZERO 0x20 + +int USB_SendControl(uint8_t flags, const void* d, int len); +int USB_RecvControl(void* d, int len); + +uint8_t USB_Available(uint8_t ep); +int USB_Send(uint8_t ep, const void* data, int len); // blocking +int USB_Recv(uint8_t ep, void* data, int len); // non-blocking +int USB_Recv(uint8_t ep); // non-blocking +void USB_Flush(uint8_t ep); + +#endif + +#endif /* if defined(USBCON) */ \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBCore.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBCore.cpp new file mode 100644 index 0000000000..d3e0170656 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBCore.cpp @@ -0,0 +1,684 @@ + + +/* Copyright (c) 2010, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#include "Platform.h" +#include "USBAPI.h" +#include "USBDesc.h" + +#if defined(USBCON) + +#define EP_TYPE_CONTROL 0x00 +#define EP_TYPE_BULK_IN 0x81 +#define EP_TYPE_BULK_OUT 0x80 +#define EP_TYPE_INTERRUPT_IN 0xC1 +#define EP_TYPE_INTERRUPT_OUT 0xC0 +#define EP_TYPE_ISOCHRONOUS_IN 0x41 +#define EP_TYPE_ISOCHRONOUS_OUT 0x40 + +/** Pulse generation counters to keep track of the number of milliseconds remaining for each pulse type */ +#define TX_RX_LED_PULSE_MS 100 +volatile u8 TxLEDPulse; /**< Milliseconds remaining for data Tx LED pulse */ +volatile u8 RxLEDPulse; /**< Milliseconds remaining for data Rx LED pulse */ + +//================================================================== +//================================================================== + +extern const u16 STRING_LANGUAGE[] PROGMEM; +extern const u16 STRING_IPRODUCT[] PROGMEM; +extern const u16 STRING_IMANUFACTURER[] PROGMEM; +extern const DeviceDescriptor USB_DeviceDescriptor PROGMEM; +extern const DeviceDescriptor USB_DeviceDescriptorA PROGMEM; + +const u16 STRING_LANGUAGE[2] = { + (3<<8) | (2+2), + 0x0409 // English +}; + +const u16 STRING_IPRODUCT[17] = { + (3<<8) | (2+2*16), +#if USB_PID == 0x8036 + 'A','r','d','u','i','n','o',' ','L','e','o','n','a','r','d','o' +#elif USB_PID == 0x8037 + 'A','r','d','u','i','n','o',' ','M','i','c','r','o',' ',' ',' ' +#elif USB_PID == 0x803C + 'A','r','d','u','i','n','o',' ','E','s','p','l','o','r','a',' ' +#elif USB_PID == 0x9208 + 'L','i','l','y','P','a','d','U','S','B',' ',' ',' ',' ',' ',' ' +#else + 'U','S','B',' ','I','O',' ','B','o','a','r','d',' ',' ',' ',' ' +#endif +}; + +const u16 STRING_IMANUFACTURER[12] = { + (3<<8) | (2+2*11), +#if USB_VID == 0x2341 + 'A','r','d','u','i','n','o',' ','L','L','C' +#elif USB_VID == 0x1b4f + 'S','p','a','r','k','F','u','n',' ',' ',' ' +#else + 'U','n','k','n','o','w','n',' ',' ',' ',' ' +#endif +}; + +#ifdef CDC_ENABLED +#define DEVICE_CLASS 0x02 +#else +#define DEVICE_CLASS 0x00 +#endif + +// DEVICE DESCRIPTOR +const DeviceDescriptor USB_DeviceDescriptor = + D_DEVICE(0x00,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); + +const DeviceDescriptor USB_DeviceDescriptorA = + D_DEVICE(DEVICE_CLASS,0x00,0x00,64,USB_VID,USB_PID,0x100,IMANUFACTURER,IPRODUCT,0,1); + +//================================================================== +//================================================================== + +volatile u8 _usbConfiguration = 0; + +static inline void WaitIN(void) +{ + while (!(UEINTX & (1< len) + n = len; + len -= n; + { + LockEP lock(ep); + if (ep & TRANSFER_ZERO) + { + while (n--) + Send8(0); + } + else if (ep & TRANSFER_PGM) + { + while (n--) + Send8(pgm_read_byte(data++)); + } + else + { + while (n--) + Send8(*data++); + } + if (!ReadWriteAllowed() || ((len == 0) && (ep & TRANSFER_RELEASE))) // Release full buffer + ReleaseTX(); + } + } + TXLED1; // light the TX LED + TxLEDPulse = TX_RX_LED_PULSE_MS; + return r; +} + +extern const u8 _initEndpoints[] PROGMEM; +const u8 _initEndpoints[] = +{ + 0, + +#ifdef CDC_ENABLED + EP_TYPE_INTERRUPT_IN, // CDC_ENDPOINT_ACM + EP_TYPE_BULK_OUT, // CDC_ENDPOINT_OUT + EP_TYPE_BULK_IN, // CDC_ENDPOINT_IN +#endif + +#ifdef HID_ENABLED + EP_TYPE_INTERRUPT_IN // HID_ENDPOINT_INT +#endif +}; + +#define EP_SINGLE_64 0x32 // EP0 +#define EP_DOUBLE_64 0x36 // Other endpoints + +static +void InitEP(u8 index, u8 type, u8 size) +{ + UENUM = index; + UECONX = 1; + UECFG0X = type; + UECFG1X = size; +} + +static +void InitEndpoints() +{ + for (u8 i = 1; i < sizeof(_initEndpoints); i++) + { + UENUM = i; + UECONX = 1; + UECFG0X = pgm_read_byte(_initEndpoints+i); + UECFG1X = EP_DOUBLE_64; + } + UERST = 0x7E; // And reset them + UERST = 0; +} + +// Handle CLASS_INTERFACE requests +static +bool ClassInterfaceRequest(Setup& setup) +{ + u8 i = setup.wIndex; + +#ifdef CDC_ENABLED + if (CDC_ACM_INTERFACE == i) + return CDC_Setup(setup); +#endif + +#ifdef HID_ENABLED + if (HID_INTERFACE == i) + return HID_Setup(setup); +#endif + return false; +} + +int _cmark; +int _cend; +void InitControl(int end) +{ + SetEP(0); + _cmark = 0; + _cend = end; +} + +static +bool SendControl(u8 d) +{ + if (_cmark < _cend) + { + if (!WaitForINOrOUT()) + return false; + Send8(d); + if (!((_cmark + 1) & 0x3F)) + ClearIN(); // Fifo is full, release this packet + } + _cmark++; + return true; +}; + +// Clipped by _cmark/_cend +int USB_SendControl(u8 flags, const void* d, int len) +{ + int sent = len; + const u8* data = (const u8*)d; + bool pgm = flags & TRANSFER_PGM; + while (len--) + { + u8 c = pgm ? pgm_read_byte(data++) : *data++; + if (!SendControl(c)) + return -1; + } + return sent; +} + +// Does not timeout or cross fifo boundaries +// Will only work for transfers <= 64 bytes +// TODO +int USB_RecvControl(void* d, int len) +{ + WaitOUT(); + Recv((u8*)d,len); + ClearOUT(); + return len; +} + +int SendInterfaces() +{ + int total = 0; + u8 interfaces = 0; + +#ifdef CDC_ENABLED + total = CDC_GetInterface(&interfaces); +#endif + +#ifdef HID_ENABLED + total += HID_GetInterface(&interfaces); +#endif + + return interfaces; +} + +// Construct a dynamic configuration descriptor +// This really needs dynamic endpoint allocation etc +// TODO +static +bool SendConfiguration(int maxlen) +{ + // Count and measure interfaces + InitControl(0); + int interfaces = SendInterfaces(); + ConfigDescriptor config = D_CONFIG(_cmark + sizeof(ConfigDescriptor),interfaces); + + // Now send them + InitControl(maxlen); + USB_SendControl(0,&config,sizeof(ConfigDescriptor)); + SendInterfaces(); + return true; +} + +u8 _cdcComposite = 0; + +static +bool SendDescriptor(Setup& setup) +{ + u8 t = setup.wValueH; + if (USB_CONFIGURATION_DESCRIPTOR_TYPE == t) + return SendConfiguration(setup.wLength); + + InitControl(setup.wLength); +#ifdef HID_ENABLED + if (HID_REPORT_DESCRIPTOR_TYPE == t) + return HID_GetDescriptor(t); +#endif + + u8 desc_length = 0; + const u8* desc_addr = 0; + if (USB_DEVICE_DESCRIPTOR_TYPE == t) + { + if (setup.wLength == 8) + _cdcComposite = 1; + desc_addr = _cdcComposite ? (const u8*)&USB_DeviceDescriptorA : (const u8*)&USB_DeviceDescriptor; + } + else if (USB_STRING_DESCRIPTOR_TYPE == t) + { + if (setup.wValueL == 0) + desc_addr = (const u8*)&STRING_LANGUAGE; + else if (setup.wValueL == IPRODUCT) + desc_addr = (const u8*)&STRING_IPRODUCT; + else if (setup.wValueL == IMANUFACTURER) + desc_addr = (const u8*)&STRING_IMANUFACTURER; + else + return false; + } + + if (desc_addr == 0) + return false; + if (desc_length == 0) + desc_length = pgm_read_byte(desc_addr); + + USB_SendControl(TRANSFER_PGM,desc_addr,desc_length); + return true; +} + +// Endpoint 0 interrupt +ISR(USB_COM_vect) +{ + SetEP(0); + if (!ReceivedSetupInt()) + return; + + Setup setup; + Recv((u8*)&setup,8); + ClearSetupInt(); + + u8 requestType = setup.bmRequestType; + if (requestType & REQUEST_DEVICETOHOST) + WaitIN(); + else + ClearIN(); + + bool ok = true; + if (REQUEST_STANDARD == (requestType & REQUEST_TYPE)) + { + // Standard Requests + u8 r = setup.bRequest; + if (GET_STATUS == r) + { + Send8(0); // TODO + Send8(0); + } + else if (CLEAR_FEATURE == r) + { + } + else if (SET_FEATURE == r) + { + } + else if (SET_ADDRESS == r) + { + WaitIN(); + UDADDR = setup.wValueL | (1<> 8) & 0xFF) + +#define CDC_V1_10 0x0110 +#define CDC_COMMUNICATION_INTERFACE_CLASS 0x02 + +#define CDC_CALL_MANAGEMENT 0x01 +#define CDC_ABSTRACT_CONTROL_MODEL 0x02 +#define CDC_HEADER 0x00 +#define CDC_ABSTRACT_CONTROL_MANAGEMENT 0x02 +#define CDC_UNION 0x06 +#define CDC_CS_INTERFACE 0x24 +#define CDC_CS_ENDPOINT 0x25 +#define CDC_DATA_INTERFACE_CLASS 0x0A + +#define MSC_SUBCLASS_SCSI 0x06 +#define MSC_PROTOCOL_BULK_ONLY 0x50 + +#define HID_HID_DESCRIPTOR_TYPE 0x21 +#define HID_REPORT_DESCRIPTOR_TYPE 0x22 +#define HID_PHYSICAL_DESCRIPTOR_TYPE 0x23 + + +// Device +typedef struct { + u8 len; // 18 + u8 dtype; // 1 USB_DEVICE_DESCRIPTOR_TYPE + u16 usbVersion; // 0x200 + u8 deviceClass; + u8 deviceSubClass; + u8 deviceProtocol; + u8 packetSize0; // Packet 0 + u16 idVendor; + u16 idProduct; + u16 deviceVersion; // 0x100 + u8 iManufacturer; + u8 iProduct; + u8 iSerialNumber; + u8 bNumConfigurations; +} DeviceDescriptor; + +// Config +typedef struct { + u8 len; // 9 + u8 dtype; // 2 + u16 clen; // total length + u8 numInterfaces; + u8 config; + u8 iconfig; + u8 attributes; + u8 maxPower; +} ConfigDescriptor; + +// String + +// Interface +typedef struct +{ + u8 len; // 9 + u8 dtype; // 4 + u8 number; + u8 alternate; + u8 numEndpoints; + u8 interfaceClass; + u8 interfaceSubClass; + u8 protocol; + u8 iInterface; +} InterfaceDescriptor; + +// Endpoint +typedef struct +{ + u8 len; // 7 + u8 dtype; // 5 + u8 addr; + u8 attr; + u16 packetSize; + u8 interval; +} EndpointDescriptor; + +// Interface Association Descriptor +// Used to bind 2 interfaces together in CDC compostite device +typedef struct +{ + u8 len; // 8 + u8 dtype; // 11 + u8 firstInterface; + u8 interfaceCount; + u8 functionClass; + u8 funtionSubClass; + u8 functionProtocol; + u8 iInterface; +} IADDescriptor; + +// CDC CS interface descriptor +typedef struct +{ + u8 len; // 5 + u8 dtype; // 0x24 + u8 subtype; + u8 d0; + u8 d1; +} CDCCSInterfaceDescriptor; + +typedef struct +{ + u8 len; // 4 + u8 dtype; // 0x24 + u8 subtype; + u8 d0; +} CDCCSInterfaceDescriptor4; + +typedef struct +{ + u8 len; + u8 dtype; // 0x24 + u8 subtype; // 1 + u8 bmCapabilities; + u8 bDataInterface; +} CMFunctionalDescriptor; + +typedef struct +{ + u8 len; + u8 dtype; // 0x24 + u8 subtype; // 1 + u8 bmCapabilities; +} ACMFunctionalDescriptor; + +typedef struct +{ + // IAD + IADDescriptor iad; // Only needed on compound device + + // Control + InterfaceDescriptor cif; // + CDCCSInterfaceDescriptor header; + CMFunctionalDescriptor callManagement; // Call Management + ACMFunctionalDescriptor controlManagement; // ACM + CDCCSInterfaceDescriptor functionalDescriptor; // CDC_UNION + EndpointDescriptor cifin; + + // Data + InterfaceDescriptor dif; + EndpointDescriptor in; + EndpointDescriptor out; +} CDCDescriptor; + +typedef struct +{ + InterfaceDescriptor msc; + EndpointDescriptor in; + EndpointDescriptor out; +} MSCDescriptor; + +typedef struct +{ + u8 len; // 9 + u8 dtype; // 0x21 + u8 addr; + u8 versionL; // 0x101 + u8 versionH; // 0x101 + u8 country; + u8 desctype; // 0x22 report + u8 descLenL; + u8 descLenH; +} HIDDescDescriptor; + +typedef struct +{ + InterfaceDescriptor hid; + HIDDescDescriptor desc; + EndpointDescriptor in; +} HIDDescriptor; + + +#define D_DEVICE(_class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs) \ + { 18, 1, 0x200, _class,_subClass,_proto,_packetSize0,_vid,_pid,_version,_im,_ip,_is,_configs } + +#define D_CONFIG(_totalLength,_interfaces) \ + { 9, 2, _totalLength,_interfaces, 1, 0, USB_CONFIG_BUS_POWERED, USB_CONFIG_POWER_MA(500) } + +#define D_INTERFACE(_n,_numEndpoints,_class,_subClass,_protocol) \ + { 9, 4, _n, 0, _numEndpoints, _class,_subClass, _protocol, 0 } + +#define D_ENDPOINT(_addr,_attr,_packetSize, _interval) \ + { 7, 5, _addr,_attr,_packetSize, _interval } + +#define D_IAD(_firstInterface, _count, _class, _subClass, _protocol) \ + { 8, 11, _firstInterface, _count, _class, _subClass, _protocol, 0 } + +#define D_HIDREPORT(_descriptorLength) \ + { 9, 0x21, 0x1, 0x1, 0, 1, 0x22, _descriptorLength, 0 } + +#define D_CDCCS(_subtype,_d0,_d1) { 5, 0x24, _subtype, _d0, _d1 } +#define D_CDCCS4(_subtype,_d0) { 4, 0x24, _subtype, _d0 } + + +#endif \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBDesc.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBDesc.h new file mode 100644 index 0000000000..900713e0f9 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/USBDesc.h @@ -0,0 +1,63 @@ + + +/* Copyright (c) 2011, Peter Barrett +** +** Permission to use, copy, modify, and/or distribute this software for +** any purpose with or without fee is hereby granted, provided that the +** above copyright notice and this permission notice appear in all copies. +** +** THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL +** WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED +** WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR +** BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES +** OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +** WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +** ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +** SOFTWARE. +*/ + +#define CDC_ENABLED +#define HID_ENABLED + + +#ifdef CDC_ENABLED +#define CDC_INTERFACE_COUNT 2 +#define CDC_ENPOINT_COUNT 3 +#else +#define CDC_INTERFACE_COUNT 0 +#define CDC_ENPOINT_COUNT 0 +#endif + +#ifdef HID_ENABLED +#define HID_INTERFACE_COUNT 1 +#define HID_ENPOINT_COUNT 1 +#else +#define HID_INTERFACE_COUNT 0 +#define HID_ENPOINT_COUNT 0 +#endif + +#define CDC_ACM_INTERFACE 0 // CDC ACM +#define CDC_DATA_INTERFACE 1 // CDC Data +#define CDC_FIRST_ENDPOINT 1 +#define CDC_ENDPOINT_ACM (CDC_FIRST_ENDPOINT) // CDC First +#define CDC_ENDPOINT_OUT (CDC_FIRST_ENDPOINT+1) +#define CDC_ENDPOINT_IN (CDC_FIRST_ENDPOINT+2) + +#define HID_INTERFACE (CDC_ACM_INTERFACE + CDC_INTERFACE_COUNT) // HID Interface +#define HID_FIRST_ENDPOINT (CDC_FIRST_ENDPOINT + CDC_ENPOINT_COUNT) +#define HID_ENDPOINT_INT (HID_FIRST_ENDPOINT) + +#define INTERFACE_COUNT (MSC_INTERFACE + MSC_INTERFACE_COUNT) + +#ifdef CDC_ENABLED +#define CDC_RX CDC_ENDPOINT_OUT +#define CDC_TX CDC_ENDPOINT_IN +#endif + +#ifdef HID_ENABLED +#define HID_TX HID_ENDPOINT_INT +#endif + +#define IMANUFACTURER 1 +#define IPRODUCT 2 + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Udp.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Udp.h new file mode 100644 index 0000000000..dc5644b9df --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/Udp.h @@ -0,0 +1,88 @@ +/* + * Udp.cpp: Library to send/receive UDP packets. + * + * NOTE: UDP is fast, but has some important limitations (thanks to Warren Gray for mentioning these) + * 1) UDP does not guarantee the order in which assembled UDP packets are received. This + * might not happen often in practice, but in larger network topologies, a UDP + * packet can be received out of sequence. + * 2) UDP does not guard against lost packets - so packets *can* disappear without the sender being + * aware of it. Again, this may not be a concern in practice on small local networks. + * For more information, see http://www.cafeaulait.org/course/week12/35.html + * + * MIT License: + * Copyright (c) 2008 Bjoern Hartmann + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + * + * bjoern@cs.stanford.edu 12/30/2008 + */ + +#ifndef udp_h +#define udp_h + +#include +#include + +class UDP : public Stream { + +public: + virtual uint8_t begin(uint16_t) =0; // initialize, start listening on specified port. Returns 1 if successful, 0 if there are no sockets available to use + virtual void stop() =0; // Finish with the UDP socket + + // Sending UDP packets + + // Start building up a packet to send to the remote host specific in ip and port + // Returns 1 if successful, 0 if there was a problem with the supplied IP address or port + virtual int beginPacket(IPAddress ip, uint16_t port) =0; + // Start building up a packet to send to the remote host specific in host and port + // Returns 1 if successful, 0 if there was a problem resolving the hostname or port + virtual int beginPacket(const char *host, uint16_t port) =0; + // Finish off this packet and send it + // Returns 1 if the packet was sent successfully, 0 if there was an error + virtual int endPacket() =0; + // Write a single byte into the packet + virtual size_t write(uint8_t) =0; + // Write size bytes from buffer into the packet + virtual size_t write(const uint8_t *buffer, size_t size) =0; + + // Start processing the next available incoming packet + // Returns the size of the packet in bytes, or 0 if no packets are available + virtual int parsePacket() =0; + // Number of bytes remaining in the current packet + virtual int available() =0; + // Read a single byte from the current packet + virtual int read() =0; + // Read up to len bytes from the current packet and place them into buffer + // Returns the number of bytes read, or 0 if none are available + virtual int read(unsigned char* buffer, size_t len) =0; + // Read up to len characters from the current packet and place them into buffer + // Returns the number of characters read, or 0 if none are available + virtual int read(char* buffer, size_t len) =0; + // Return the next byte from the current packet without moving on to the next byte + virtual int peek() =0; + virtual void flush() =0; // Finish reading the current packet + + // Return the IP address of the host who sent the current incoming packet + virtual IPAddress remoteIP() =0; + // Return the port of the host who sent the current incoming packet + virtual uint16_t remotePort() =0; +protected: + uint8_t* rawIPAddress(IPAddress& addr) { return addr.raw_address(); }; +}; + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WCharacter.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WCharacter.h new file mode 100644 index 0000000000..79733b50a5 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WCharacter.h @@ -0,0 +1,168 @@ +/* + WCharacter.h - Character utility functions for Wiring & Arduino + Copyright (c) 2010 Hernando Barragan. All right reserved. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef Character_h +#define Character_h + +#include + +// WCharacter.h prototypes +inline boolean isAlphaNumeric(int c) __attribute__((always_inline)); +inline boolean isAlpha(int c) __attribute__((always_inline)); +inline boolean isAscii(int c) __attribute__((always_inline)); +inline boolean isWhitespace(int c) __attribute__((always_inline)); +inline boolean isControl(int c) __attribute__((always_inline)); +inline boolean isDigit(int c) __attribute__((always_inline)); +inline boolean isGraph(int c) __attribute__((always_inline)); +inline boolean isLowerCase(int c) __attribute__((always_inline)); +inline boolean isPrintable(int c) __attribute__((always_inline)); +inline boolean isPunct(int c) __attribute__((always_inline)); +inline boolean isSpace(int c) __attribute__((always_inline)); +inline boolean isUpperCase(int c) __attribute__((always_inline)); +inline boolean isHexadecimalDigit(int c) __attribute__((always_inline)); +inline int toAscii(int c) __attribute__((always_inline)); +inline int toLowerCase(int c) __attribute__((always_inline)); +inline int toUpperCase(int c)__attribute__((always_inline)); + + +// Checks for an alphanumeric character. +// It is equivalent to (isalpha(c) || isdigit(c)). +inline boolean isAlphaNumeric(int c) +{ + return ( isalnum(c) == 0 ? false : true); +} + + +// Checks for an alphabetic character. +// It is equivalent to (isupper(c) || islower(c)). +inline boolean isAlpha(int c) +{ + return ( isalpha(c) == 0 ? false : true); +} + + +// Checks whether c is a 7-bit unsigned char value +// that fits into the ASCII character set. +inline boolean isAscii(int c) +{ + return ( isascii (c) == 0 ? false : true); +} + + +// Checks for a blank character, that is, a space or a tab. +inline boolean isWhitespace(int c) +{ + return ( isblank (c) == 0 ? false : true); +} + + +// Checks for a control character. +inline boolean isControl(int c) +{ + return ( iscntrl (c) == 0 ? false : true); +} + + +// Checks for a digit (0 through 9). +inline boolean isDigit(int c) +{ + return ( isdigit (c) == 0 ? false : true); +} + + +// Checks for any printable character except space. +inline boolean isGraph(int c) +{ + return ( isgraph (c) == 0 ? false : true); +} + + +// Checks for a lower-case character. +inline boolean isLowerCase(int c) +{ + return (islower (c) == 0 ? false : true); +} + + +// Checks for any printable character including space. +inline boolean isPrintable(int c) +{ + return ( isprint (c) == 0 ? false : true); +} + + +// Checks for any printable character which is not a space +// or an alphanumeric character. +inline boolean isPunct(int c) +{ + return ( ispunct (c) == 0 ? false : true); +} + + +// Checks for white-space characters. For the avr-libc library, +// these are: space, formfeed ('\f'), newline ('\n'), carriage +// return ('\r'), horizontal tab ('\t'), and vertical tab ('\v'). +inline boolean isSpace(int c) +{ + return ( isspace (c) == 0 ? false : true); +} + + +// Checks for an uppercase letter. +inline boolean isUpperCase(int c) +{ + return ( isupper (c) == 0 ? false : true); +} + + +// Checks for a hexadecimal digits, i.e. one of 0 1 2 3 4 5 6 7 +// 8 9 a b c d e f A B C D E F. +inline boolean isHexadecimalDigit(int c) +{ + return ( isxdigit (c) == 0 ? false : true); +} + + +// Converts c to a 7-bit unsigned char value that fits into the +// ASCII character set, by clearing the high-order bits. +inline int toAscii(int c) +{ + return toascii (c); +} + + +// Warning: +// Many people will be unhappy if you use this function. +// This function will convert accented letters into random +// characters. + +// Converts the letter c to lower case, if possible. +inline int toLowerCase(int c) +{ + return tolower (c); +} + + +// Converts the letter c to upper case, if possible. +inline int toUpperCase(int c) +{ + return toupper (c); +} + +#endif \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WInterrupts.c b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WInterrupts.c new file mode 100644 index 0000000000..62efc9cadb --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WInterrupts.c @@ -0,0 +1,322 @@ +/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */ + +/* + Part of the Wiring project - http://wiring.uniandes.edu.co + + Copyright (c) 2004-05 Hernando Barragan + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 24 November 2006 by David A. Mellis + Modified 1 August 2010 by Mark Sproul +*/ + +#include +#include +#include +#include +#include + +#include "wiring_private.h" + +static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS]; +// volatile static voidFuncPtr twiIntFunc; + +void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) { + if(interruptNum < EXTERNAL_NUM_INTERRUPTS) { + intFunc[interruptNum] = userFunc; + + // Configure the interrupt mode (trigger on low input, any change, rising + // edge, or falling edge). The mode constants were chosen to correspond + // to the configuration bits in the hardware register, so we simply shift + // the mode into place. + + // Enable the interrupt. + + switch (interruptNum) { +#if defined(__AVR_ATmega32U4__) + // I hate doing this, but the register assignment differs between the 1280/2560 + // and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't + // even present on the 32U4 this is the only way to distinguish between them. + case 0: + EICRA = (EICRA & ~((1<= howbig) { + return howsmall; + } + long diff = howbig - howsmall; + return random(diff) + howsmall; +} + +long map(long x, long in_min, long in_max, long out_min, long out_max) +{ + return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; +} + +unsigned int makeWord(unsigned int w) { return w; } +unsigned int makeWord(unsigned char h, unsigned char l) { return (h << 8) | l; } \ No newline at end of file diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.cpp new file mode 100644 index 0000000000..c6839fc0d9 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.cpp @@ -0,0 +1,645 @@ +/* + WString.cpp - String library for Wiring & Arduino + ...mostly rewritten by Paul Stoffregen... + Copyright (c) 2009-10 Hernando Barragan. All rights reserved. + Copyright 2011, Paul Stoffregen, paul@pjrc.com + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include "WString.h" + + +/*********************************************/ +/* Constructors */ +/*********************************************/ + +String::String(const char *cstr) +{ + init(); + if (cstr) copy(cstr, strlen(cstr)); +} + +String::String(const String &value) +{ + init(); + *this = value; +} + +#ifdef __GXX_EXPERIMENTAL_CXX0X__ +String::String(String &&rval) +{ + init(); + move(rval); +} +String::String(StringSumHelper &&rval) +{ + init(); + move(rval); +} +#endif + +String::String(char c) +{ + init(); + char buf[2]; + buf[0] = c; + buf[1] = 0; + *this = buf; +} + +String::String(unsigned char value, unsigned char base) +{ + init(); + char buf[9]; + utoa(value, buf, base); + *this = buf; +} + +String::String(int value, unsigned char base) +{ + init(); + char buf[18]; + itoa(value, buf, base); + *this = buf; +} + +String::String(unsigned int value, unsigned char base) +{ + init(); + char buf[17]; + utoa(value, buf, base); + *this = buf; +} + +String::String(long value, unsigned char base) +{ + init(); + char buf[34]; + ltoa(value, buf, base); + *this = buf; +} + +String::String(unsigned long value, unsigned char base) +{ + init(); + char buf[33]; + ultoa(value, buf, base); + *this = buf; +} + +String::~String() +{ + free(buffer); +} + +/*********************************************/ +/* Memory Management */ +/*********************************************/ + +inline void String::init(void) +{ + buffer = NULL; + capacity = 0; + len = 0; + flags = 0; +} + +void String::invalidate(void) +{ + if (buffer) free(buffer); + buffer = NULL; + capacity = len = 0; +} + +unsigned char String::reserve(unsigned int size) +{ + if (buffer && capacity >= size) return 1; + if (changeBuffer(size)) { + if (len == 0) buffer[0] = 0; + return 1; + } + return 0; +} + +unsigned char String::changeBuffer(unsigned int maxStrLen) +{ + char *newbuffer = (char *)realloc(buffer, maxStrLen + 1); + if (newbuffer) { + buffer = newbuffer; + capacity = maxStrLen; + return 1; + } + return 0; +} + +/*********************************************/ +/* Copy and Move */ +/*********************************************/ + +String & String::copy(const char *cstr, unsigned int length) +{ + if (!reserve(length)) { + invalidate(); + return *this; + } + len = length; + strcpy(buffer, cstr); + return *this; +} + +#ifdef __GXX_EXPERIMENTAL_CXX0X__ +void String::move(String &rhs) +{ + if (buffer) { + if (capacity >= rhs.len) { + strcpy(buffer, rhs.buffer); + len = rhs.len; + rhs.len = 0; + return; + } else { + free(buffer); + } + } + buffer = rhs.buffer; + capacity = rhs.capacity; + len = rhs.len; + rhs.buffer = NULL; + rhs.capacity = 0; + rhs.len = 0; +} +#endif + +String & String::operator = (const String &rhs) +{ + if (this == &rhs) return *this; + + if (rhs.buffer) copy(rhs.buffer, rhs.len); + else invalidate(); + + return *this; +} + +#ifdef __GXX_EXPERIMENTAL_CXX0X__ +String & String::operator = (String &&rval) +{ + if (this != &rval) move(rval); + return *this; +} + +String & String::operator = (StringSumHelper &&rval) +{ + if (this != &rval) move(rval); + return *this; +} +#endif + +String & String::operator = (const char *cstr) +{ + if (cstr) copy(cstr, strlen(cstr)); + else invalidate(); + + return *this; +} + +/*********************************************/ +/* concat */ +/*********************************************/ + +unsigned char String::concat(const String &s) +{ + return concat(s.buffer, s.len); +} + +unsigned char String::concat(const char *cstr, unsigned int length) +{ + unsigned int newlen = len + length; + if (!cstr) return 0; + if (length == 0) return 1; + if (!reserve(newlen)) return 0; + strcpy(buffer + len, cstr); + len = newlen; + return 1; +} + +unsigned char String::concat(const char *cstr) +{ + if (!cstr) return 0; + return concat(cstr, strlen(cstr)); +} + +unsigned char String::concat(char c) +{ + char buf[2]; + buf[0] = c; + buf[1] = 0; + return concat(buf, 1); +} + +unsigned char String::concat(unsigned char num) +{ + char buf[4]; + itoa(num, buf, 10); + return concat(buf, strlen(buf)); +} + +unsigned char String::concat(int num) +{ + char buf[7]; + itoa(num, buf, 10); + return concat(buf, strlen(buf)); +} + +unsigned char String::concat(unsigned int num) +{ + char buf[6]; + utoa(num, buf, 10); + return concat(buf, strlen(buf)); +} + +unsigned char String::concat(long num) +{ + char buf[12]; + ltoa(num, buf, 10); + return concat(buf, strlen(buf)); +} + +unsigned char String::concat(unsigned long num) +{ + char buf[11]; + ultoa(num, buf, 10); + return concat(buf, strlen(buf)); +} + +/*********************************************/ +/* Concatenate */ +/*********************************************/ + +StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(rhs.buffer, rhs.len)) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr) +{ + StringSumHelper &a = const_cast(lhs); + if (!cstr || !a.concat(cstr, strlen(cstr))) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, char c) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(c)) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char num) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(num)) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, int num) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(num)) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(num)) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, long num) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(num)) a.invalidate(); + return a; +} + +StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num) +{ + StringSumHelper &a = const_cast(lhs); + if (!a.concat(num)) a.invalidate(); + return a; +} + +/*********************************************/ +/* Comparison */ +/*********************************************/ + +int String::compareTo(const String &s) const +{ + if (!buffer || !s.buffer) { + if (s.buffer && s.len > 0) return 0 - *(unsigned char *)s.buffer; + if (buffer && len > 0) return *(unsigned char *)buffer; + return 0; + } + return strcmp(buffer, s.buffer); +} + +unsigned char String::equals(const String &s2) const +{ + return (len == s2.len && compareTo(s2) == 0); +} + +unsigned char String::equals(const char *cstr) const +{ + if (len == 0) return (cstr == NULL || *cstr == 0); + if (cstr == NULL) return buffer[0] == 0; + return strcmp(buffer, cstr) == 0; +} + +unsigned char String::operator<(const String &rhs) const +{ + return compareTo(rhs) < 0; +} + +unsigned char String::operator>(const String &rhs) const +{ + return compareTo(rhs) > 0; +} + +unsigned char String::operator<=(const String &rhs) const +{ + return compareTo(rhs) <= 0; +} + +unsigned char String::operator>=(const String &rhs) const +{ + return compareTo(rhs) >= 0; +} + +unsigned char String::equalsIgnoreCase( const String &s2 ) const +{ + if (this == &s2) return 1; + if (len != s2.len) return 0; + if (len == 0) return 1; + const char *p1 = buffer; + const char *p2 = s2.buffer; + while (*p1) { + if (tolower(*p1++) != tolower(*p2++)) return 0; + } + return 1; +} + +unsigned char String::startsWith( const String &s2 ) const +{ + if (len < s2.len) return 0; + return startsWith(s2, 0); +} + +unsigned char String::startsWith( const String &s2, unsigned int offset ) const +{ + if (offset > len - s2.len || !buffer || !s2.buffer) return 0; + return strncmp( &buffer[offset], s2.buffer, s2.len ) == 0; +} + +unsigned char String::endsWith( const String &s2 ) const +{ + if ( len < s2.len || !buffer || !s2.buffer) return 0; + return strcmp(&buffer[len - s2.len], s2.buffer) == 0; +} + +/*********************************************/ +/* Character Access */ +/*********************************************/ + +char String::charAt(unsigned int loc) const +{ + return operator[](loc); +} + +void String::setCharAt(unsigned int loc, char c) +{ + if (loc < len) buffer[loc] = c; +} + +char & String::operator[](unsigned int index) +{ + static char dummy_writable_char; + if (index >= len || !buffer) { + dummy_writable_char = 0; + return dummy_writable_char; + } + return buffer[index]; +} + +char String::operator[]( unsigned int index ) const +{ + if (index >= len || !buffer) return 0; + return buffer[index]; +} + +void String::getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index) const +{ + if (!bufsize || !buf) return; + if (index >= len) { + buf[0] = 0; + return; + } + unsigned int n = bufsize - 1; + if (n > len - index) n = len - index; + strncpy((char *)buf, buffer + index, n); + buf[n] = 0; +} + +/*********************************************/ +/* Search */ +/*********************************************/ + +int String::indexOf(char c) const +{ + return indexOf(c, 0); +} + +int String::indexOf( char ch, unsigned int fromIndex ) const +{ + if (fromIndex >= len) return -1; + const char* temp = strchr(buffer + fromIndex, ch); + if (temp == NULL) return -1; + return temp - buffer; +} + +int String::indexOf(const String &s2) const +{ + return indexOf(s2, 0); +} + +int String::indexOf(const String &s2, unsigned int fromIndex) const +{ + if (fromIndex >= len) return -1; + const char *found = strstr(buffer + fromIndex, s2.buffer); + if (found == NULL) return -1; + return found - buffer; +} + +int String::lastIndexOf( char theChar ) const +{ + return lastIndexOf(theChar, len - 1); +} + +int String::lastIndexOf(char ch, unsigned int fromIndex) const +{ + if (fromIndex >= len) return -1; + char tempchar = buffer[fromIndex + 1]; + buffer[fromIndex + 1] = '\0'; + char* temp = strrchr( buffer, ch ); + buffer[fromIndex + 1] = tempchar; + if (temp == NULL) return -1; + return temp - buffer; +} + +int String::lastIndexOf(const String &s2) const +{ + return lastIndexOf(s2, len - s2.len); +} + +int String::lastIndexOf(const String &s2, unsigned int fromIndex) const +{ + if (s2.len == 0 || len == 0 || s2.len > len) return -1; + if (fromIndex >= len) fromIndex = len - 1; + int found = -1; + for (char *p = buffer; p <= buffer + fromIndex; p++) { + p = strstr(p, s2.buffer); + if (!p) break; + if ((unsigned int)(p - buffer) <= fromIndex) found = p - buffer; + } + return found; +} + +String String::substring( unsigned int left ) const +{ + return substring(left, len); +} + +String String::substring(unsigned int left, unsigned int right) const +{ + if (left > right) { + unsigned int temp = right; + right = left; + left = temp; + } + String out; + if (left > len) return out; + if (right > len) right = len; + char temp = buffer[right]; // save the replaced character + buffer[right] = '\0'; + out = buffer + left; // pointer arithmetic + buffer[right] = temp; //restore character + return out; +} + +/*********************************************/ +/* Modification */ +/*********************************************/ + +void String::replace(char find, char replace) +{ + if (!buffer) return; + for (char *p = buffer; *p; p++) { + if (*p == find) *p = replace; + } +} + +void String::replace(const String& find, const String& replace) +{ + if (len == 0 || find.len == 0) return; + int diff = replace.len - find.len; + char *readFrom = buffer; + char *foundAt; + if (diff == 0) { + while ((foundAt = strstr(readFrom, find.buffer)) != NULL) { + memcpy(foundAt, replace.buffer, replace.len); + readFrom = foundAt + replace.len; + } + } else if (diff < 0) { + char *writeTo = buffer; + while ((foundAt = strstr(readFrom, find.buffer)) != NULL) { + unsigned int n = foundAt - readFrom; + memcpy(writeTo, readFrom, n); + writeTo += n; + memcpy(writeTo, replace.buffer, replace.len); + writeTo += replace.len; + readFrom = foundAt + find.len; + len += diff; + } + strcpy(writeTo, readFrom); + } else { + unsigned int size = len; // compute size needed for result + while ((foundAt = strstr(readFrom, find.buffer)) != NULL) { + readFrom = foundAt + find.len; + size += diff; + } + if (size == len) return; + if (size > capacity && !changeBuffer(size)) return; // XXX: tell user! + int index = len - 1; + while (index >= 0 && (index = lastIndexOf(find, index)) >= 0) { + readFrom = buffer + index + find.len; + memmove(readFrom + diff, readFrom, len - (readFrom - buffer)); + len += diff; + buffer[len] = 0; + memcpy(buffer + index, replace.buffer, replace.len); + index--; + } + } +} + +void String::toLowerCase(void) +{ + if (!buffer) return; + for (char *p = buffer; *p; p++) { + *p = tolower(*p); + } +} + +void String::toUpperCase(void) +{ + if (!buffer) return; + for (char *p = buffer; *p; p++) { + *p = toupper(*p); + } +} + +void String::trim(void) +{ + if (!buffer || len == 0) return; + char *begin = buffer; + while (isspace(*begin)) begin++; + char *end = buffer + len - 1; + while (isspace(*end) && end >= begin) end--; + len = end + 1 - begin; + if (begin > buffer) memcpy(buffer, begin, len); + buffer[len] = 0; +} + +/*********************************************/ +/* Parsing / Conversion */ +/*********************************************/ + +long String::toInt(void) const +{ + if (buffer) return atol(buffer); + return 0; +} + + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.h new file mode 100644 index 0000000000..947325e5f5 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/WString.h @@ -0,0 +1,205 @@ +/* + WString.h - String library for Wiring & Arduino + ...mostly rewritten by Paul Stoffregen... + Copyright (c) 2009-10 Hernando Barragan. All right reserved. + Copyright 2011, Paul Stoffregen, paul@pjrc.com + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#ifndef String_class_h +#define String_class_h +#ifdef __cplusplus + +#include +#include +#include +#include + +// When compiling programs with this class, the following gcc parameters +// dramatically increase performance and memory (RAM) efficiency, typically +// with little or no increase in code size. +// -felide-constructors +// -std=c++0x + +class __FlashStringHelper; +#define F(string_literal) (reinterpret_cast(PSTR(string_literal))) + +// An inherited class for holding the result of a concatenation. These +// result objects are assumed to be writable by subsequent concatenations. +class StringSumHelper; + +// The string class +class String +{ + // use a function pointer to allow for "if (s)" without the + // complications of an operator bool(). for more information, see: + // http://www.artima.com/cppsource/safebool.html + typedef void (String::*StringIfHelperType)() const; + void StringIfHelper() const {} + +public: + // constructors + // creates a copy of the initial value. + // if the initial value is null or invalid, or if memory allocation + // fails, the string will be marked as invalid (i.e. "if (s)" will + // be false). + String(const char *cstr = ""); + String(const String &str); + #ifdef __GXX_EXPERIMENTAL_CXX0X__ + String(String &&rval); + String(StringSumHelper &&rval); + #endif + explicit String(char c); + explicit String(unsigned char, unsigned char base=10); + explicit String(int, unsigned char base=10); + explicit String(unsigned int, unsigned char base=10); + explicit String(long, unsigned char base=10); + explicit String(unsigned long, unsigned char base=10); + ~String(void); + + // memory management + // return true on success, false on failure (in which case, the string + // is left unchanged). reserve(0), if successful, will validate an + // invalid string (i.e., "if (s)" will be true afterwards) + unsigned char reserve(unsigned int size); + inline unsigned int length(void) const {return len;} + + // creates a copy of the assigned value. if the value is null or + // invalid, or if the memory allocation fails, the string will be + // marked as invalid ("if (s)" will be false). + String & operator = (const String &rhs); + String & operator = (const char *cstr); + #ifdef __GXX_EXPERIMENTAL_CXX0X__ + String & operator = (String &&rval); + String & operator = (StringSumHelper &&rval); + #endif + + // concatenate (works w/ built-in types) + + // returns true on success, false on failure (in which case, the string + // is left unchanged). if the argument is null or invalid, the + // concatenation is considered unsucessful. + unsigned char concat(const String &str); + unsigned char concat(const char *cstr); + unsigned char concat(char c); + unsigned char concat(unsigned char c); + unsigned char concat(int num); + unsigned char concat(unsigned int num); + unsigned char concat(long num); + unsigned char concat(unsigned long num); + + // if there's not enough memory for the concatenated value, the string + // will be left unchanged (but this isn't signalled in any way) + String & operator += (const String &rhs) {concat(rhs); return (*this);} + String & operator += (const char *cstr) {concat(cstr); return (*this);} + String & operator += (char c) {concat(c); return (*this);} + String & operator += (unsigned char num) {concat(num); return (*this);} + String & operator += (int num) {concat(num); return (*this);} + String & operator += (unsigned int num) {concat(num); return (*this);} + String & operator += (long num) {concat(num); return (*this);} + String & operator += (unsigned long num) {concat(num); return (*this);} + + friend StringSumHelper & operator + (const StringSumHelper &lhs, const String &rhs); + friend StringSumHelper & operator + (const StringSumHelper &lhs, const char *cstr); + friend StringSumHelper & operator + (const StringSumHelper &lhs, char c); + friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned char num); + friend StringSumHelper & operator + (const StringSumHelper &lhs, int num); + friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned int num); + friend StringSumHelper & operator + (const StringSumHelper &lhs, long num); + friend StringSumHelper & operator + (const StringSumHelper &lhs, unsigned long num); + + // comparison (only works w/ Strings and "strings") + operator StringIfHelperType() const { return buffer ? &String::StringIfHelper : 0; } + int compareTo(const String &s) const; + unsigned char equals(const String &s) const; + unsigned char equals(const char *cstr) const; + unsigned char operator == (const String &rhs) const {return equals(rhs);} + unsigned char operator == (const char *cstr) const {return equals(cstr);} + unsigned char operator != (const String &rhs) const {return !equals(rhs);} + unsigned char operator != (const char *cstr) const {return !equals(cstr);} + unsigned char operator < (const String &rhs) const; + unsigned char operator > (const String &rhs) const; + unsigned char operator <= (const String &rhs) const; + unsigned char operator >= (const String &rhs) const; + unsigned char equalsIgnoreCase(const String &s) const; + unsigned char startsWith( const String &prefix) const; + unsigned char startsWith(const String &prefix, unsigned int offset) const; + unsigned char endsWith(const String &suffix) const; + + // character acccess + char charAt(unsigned int index) const; + void setCharAt(unsigned int index, char c); + char operator [] (unsigned int index) const; + char& operator [] (unsigned int index); + void getBytes(unsigned char *buf, unsigned int bufsize, unsigned int index=0) const; + void toCharArray(char *buf, unsigned int bufsize, unsigned int index=0) const + {getBytes((unsigned char *)buf, bufsize, index);} + + // search + int indexOf( char ch ) const; + int indexOf( char ch, unsigned int fromIndex ) const; + int indexOf( const String &str ) const; + int indexOf( const String &str, unsigned int fromIndex ) const; + int lastIndexOf( char ch ) const; + int lastIndexOf( char ch, unsigned int fromIndex ) const; + int lastIndexOf( const String &str ) const; + int lastIndexOf( const String &str, unsigned int fromIndex ) const; + String substring( unsigned int beginIndex ) const; + String substring( unsigned int beginIndex, unsigned int endIndex ) const; + + // modification + void replace(char find, char replace); + void replace(const String& find, const String& replace); + void toLowerCase(void); + void toUpperCase(void); + void trim(void); + + // parsing/conversion + long toInt(void) const; + +protected: + char *buffer; // the actual char array + unsigned int capacity; // the array length minus one (for the '\0') + unsigned int len; // the String length (not counting the '\0') + unsigned char flags; // unused, for future features +protected: + void init(void); + void invalidate(void); + unsigned char changeBuffer(unsigned int maxStrLen); + unsigned char concat(const char *cstr, unsigned int length); + + // copy and move + String & copy(const char *cstr, unsigned int length); + #ifdef __GXX_EXPERIMENTAL_CXX0X__ + void move(String &rhs); + #endif +}; + +class StringSumHelper : public String +{ +public: + StringSumHelper(const String &s) : String(s) {} + StringSumHelper(const char *p) : String(p) {} + StringSumHelper(char c) : String(c) {} + StringSumHelper(unsigned char num) : String(num) {} + StringSumHelper(int num) : String(num) {} + StringSumHelper(unsigned int num) : String(num) {} + StringSumHelper(long num) : String(num) {} + StringSumHelper(unsigned long num) : String(num) {} +}; + +#endif // __cplusplus +#endif // String_class_h diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/binary.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/binary.h new file mode 100644 index 0000000000..af1498033a --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/binary.h @@ -0,0 +1,515 @@ +#ifndef Binary_h +#define Binary_h + +#define B0 0 +#define B00 0 +#define B000 0 +#define B0000 0 +#define B00000 0 +#define B000000 0 +#define B0000000 0 +#define B00000000 0 +#define B1 1 +#define B01 1 +#define B001 1 +#define B0001 1 +#define B00001 1 +#define B000001 1 +#define B0000001 1 +#define B00000001 1 +#define B10 2 +#define B010 2 +#define B0010 2 +#define B00010 2 +#define B000010 2 +#define B0000010 2 +#define B00000010 2 +#define B11 3 +#define B011 3 +#define B0011 3 +#define B00011 3 +#define B000011 3 +#define B0000011 3 +#define B00000011 3 +#define B100 4 +#define B0100 4 +#define B00100 4 +#define B000100 4 +#define B0000100 4 +#define B00000100 4 +#define B101 5 +#define B0101 5 +#define B00101 5 +#define B000101 5 +#define B0000101 5 +#define B00000101 5 +#define B110 6 +#define B0110 6 +#define B00110 6 +#define B000110 6 +#define B0000110 6 +#define B00000110 6 +#define B111 7 +#define B0111 7 +#define B00111 7 +#define B000111 7 +#define B0000111 7 +#define B00000111 7 +#define B1000 8 +#define B01000 8 +#define B001000 8 +#define B0001000 8 +#define B00001000 8 +#define B1001 9 +#define B01001 9 +#define B001001 9 +#define B0001001 9 +#define B00001001 9 +#define B1010 10 +#define B01010 10 +#define B001010 10 +#define B0001010 10 +#define B00001010 10 +#define B1011 11 +#define B01011 11 +#define B001011 11 +#define B0001011 11 +#define B00001011 11 +#define B1100 12 +#define B01100 12 +#define B001100 12 +#define B0001100 12 +#define B00001100 12 +#define B1101 13 +#define B01101 13 +#define B001101 13 +#define B0001101 13 +#define B00001101 13 +#define B1110 14 +#define B01110 14 +#define B001110 14 +#define B0001110 14 +#define B00001110 14 +#define B1111 15 +#define B01111 15 +#define B001111 15 +#define B0001111 15 +#define B00001111 15 +#define B10000 16 +#define B010000 16 +#define B0010000 16 +#define B00010000 16 +#define B10001 17 +#define B010001 17 +#define B0010001 17 +#define B00010001 17 +#define B10010 18 +#define B010010 18 +#define B0010010 18 +#define B00010010 18 +#define B10011 19 +#define B010011 19 +#define B0010011 19 +#define B00010011 19 +#define B10100 20 +#define B010100 20 +#define B0010100 20 +#define B00010100 20 +#define B10101 21 +#define B010101 21 +#define B0010101 21 +#define B00010101 21 +#define B10110 22 +#define B010110 22 +#define B0010110 22 +#define B00010110 22 +#define B10111 23 +#define B010111 23 +#define B0010111 23 +#define B00010111 23 +#define B11000 24 +#define B011000 24 +#define B0011000 24 +#define B00011000 24 +#define B11001 25 +#define B011001 25 +#define B0011001 25 +#define B00011001 25 +#define B11010 26 +#define B011010 26 +#define B0011010 26 +#define B00011010 26 +#define B11011 27 +#define B011011 27 +#define B0011011 27 +#define B00011011 27 +#define B11100 28 +#define B011100 28 +#define B0011100 28 +#define B00011100 28 +#define B11101 29 +#define B011101 29 +#define B0011101 29 +#define B00011101 29 +#define B11110 30 +#define B011110 30 +#define B0011110 30 +#define B00011110 30 +#define B11111 31 +#define B011111 31 +#define B0011111 31 +#define B00011111 31 +#define B100000 32 +#define B0100000 32 +#define B00100000 32 +#define B100001 33 +#define B0100001 33 +#define B00100001 33 +#define B100010 34 +#define B0100010 34 +#define B00100010 34 +#define B100011 35 +#define B0100011 35 +#define B00100011 35 +#define B100100 36 +#define B0100100 36 +#define B00100100 36 +#define B100101 37 +#define B0100101 37 +#define B00100101 37 +#define B100110 38 +#define B0100110 38 +#define B00100110 38 +#define B100111 39 +#define B0100111 39 +#define B00100111 39 +#define B101000 40 +#define B0101000 40 +#define B00101000 40 +#define B101001 41 +#define B0101001 41 +#define B00101001 41 +#define B101010 42 +#define B0101010 42 +#define B00101010 42 +#define B101011 43 +#define B0101011 43 +#define B00101011 43 +#define B101100 44 +#define B0101100 44 +#define B00101100 44 +#define B101101 45 +#define B0101101 45 +#define B00101101 45 +#define B101110 46 +#define B0101110 46 +#define B00101110 46 +#define B101111 47 +#define B0101111 47 +#define B00101111 47 +#define B110000 48 +#define B0110000 48 +#define B00110000 48 +#define B110001 49 +#define B0110001 49 +#define B00110001 49 +#define B110010 50 +#define B0110010 50 +#define B00110010 50 +#define B110011 51 +#define B0110011 51 +#define B00110011 51 +#define B110100 52 +#define B0110100 52 +#define B00110100 52 +#define B110101 53 +#define B0110101 53 +#define B00110101 53 +#define B110110 54 +#define B0110110 54 +#define B00110110 54 +#define B110111 55 +#define B0110111 55 +#define B00110111 55 +#define B111000 56 +#define B0111000 56 +#define B00111000 56 +#define B111001 57 +#define B0111001 57 +#define B00111001 57 +#define B111010 58 +#define B0111010 58 +#define B00111010 58 +#define B111011 59 +#define B0111011 59 +#define B00111011 59 +#define B111100 60 +#define B0111100 60 +#define B00111100 60 +#define B111101 61 +#define B0111101 61 +#define B00111101 61 +#define B111110 62 +#define B0111110 62 +#define B00111110 62 +#define B111111 63 +#define B0111111 63 +#define B00111111 63 +#define B1000000 64 +#define B01000000 64 +#define B1000001 65 +#define B01000001 65 +#define B1000010 66 +#define B01000010 66 +#define B1000011 67 +#define B01000011 67 +#define B1000100 68 +#define B01000100 68 +#define B1000101 69 +#define B01000101 69 +#define B1000110 70 +#define B01000110 70 +#define B1000111 71 +#define B01000111 71 +#define B1001000 72 +#define B01001000 72 +#define B1001001 73 +#define B01001001 73 +#define B1001010 74 +#define B01001010 74 +#define B1001011 75 +#define B01001011 75 +#define B1001100 76 +#define B01001100 76 +#define B1001101 77 +#define B01001101 77 +#define B1001110 78 +#define B01001110 78 +#define B1001111 79 +#define B01001111 79 +#define B1010000 80 +#define B01010000 80 +#define B1010001 81 +#define B01010001 81 +#define B1010010 82 +#define B01010010 82 +#define B1010011 83 +#define B01010011 83 +#define B1010100 84 +#define B01010100 84 +#define B1010101 85 +#define B01010101 85 +#define B1010110 86 +#define B01010110 86 +#define B1010111 87 +#define B01010111 87 +#define B1011000 88 +#define B01011000 88 +#define B1011001 89 +#define B01011001 89 +#define B1011010 90 +#define B01011010 90 +#define B1011011 91 +#define B01011011 91 +#define B1011100 92 +#define B01011100 92 +#define B1011101 93 +#define B01011101 93 +#define B1011110 94 +#define B01011110 94 +#define B1011111 95 +#define B01011111 95 +#define B1100000 96 +#define B01100000 96 +#define B1100001 97 +#define B01100001 97 +#define B1100010 98 +#define B01100010 98 +#define B1100011 99 +#define B01100011 99 +#define B1100100 100 +#define B01100100 100 +#define B1100101 101 +#define B01100101 101 +#define B1100110 102 +#define B01100110 102 +#define B1100111 103 +#define B01100111 103 +#define B1101000 104 +#define B01101000 104 +#define B1101001 105 +#define B01101001 105 +#define B1101010 106 +#define B01101010 106 +#define B1101011 107 +#define B01101011 107 +#define B1101100 108 +#define B01101100 108 +#define B1101101 109 +#define B01101101 109 +#define B1101110 110 +#define B01101110 110 +#define B1101111 111 +#define B01101111 111 +#define B1110000 112 +#define B01110000 112 +#define B1110001 113 +#define B01110001 113 +#define B1110010 114 +#define B01110010 114 +#define B1110011 115 +#define B01110011 115 +#define B1110100 116 +#define B01110100 116 +#define B1110101 117 +#define B01110101 117 +#define B1110110 118 +#define B01110110 118 +#define B1110111 119 +#define B01110111 119 +#define B1111000 120 +#define B01111000 120 +#define B1111001 121 +#define B01111001 121 +#define B1111010 122 +#define B01111010 122 +#define B1111011 123 +#define B01111011 123 +#define B1111100 124 +#define B01111100 124 +#define B1111101 125 +#define B01111101 125 +#define B1111110 126 +#define B01111110 126 +#define B1111111 127 +#define B01111111 127 +#define B10000000 128 +#define B10000001 129 +#define B10000010 130 +#define B10000011 131 +#define B10000100 132 +#define B10000101 133 +#define B10000110 134 +#define B10000111 135 +#define B10001000 136 +#define B10001001 137 +#define B10001010 138 +#define B10001011 139 +#define B10001100 140 +#define B10001101 141 +#define B10001110 142 +#define B10001111 143 +#define B10010000 144 +#define B10010001 145 +#define B10010010 146 +#define B10010011 147 +#define B10010100 148 +#define B10010101 149 +#define B10010110 150 +#define B10010111 151 +#define B10011000 152 +#define B10011001 153 +#define B10011010 154 +#define B10011011 155 +#define B10011100 156 +#define B10011101 157 +#define B10011110 158 +#define B10011111 159 +#define B10100000 160 +#define B10100001 161 +#define B10100010 162 +#define B10100011 163 +#define B10100100 164 +#define B10100101 165 +#define B10100110 166 +#define B10100111 167 +#define B10101000 168 +#define B10101001 169 +#define B10101010 170 +#define B10101011 171 +#define B10101100 172 +#define B10101101 173 +#define B10101110 174 +#define B10101111 175 +#define B10110000 176 +#define B10110001 177 +#define B10110010 178 +#define B10110011 179 +#define B10110100 180 +#define B10110101 181 +#define B10110110 182 +#define B10110111 183 +#define B10111000 184 +#define B10111001 185 +#define B10111010 186 +#define B10111011 187 +#define B10111100 188 +#define B10111101 189 +#define B10111110 190 +#define B10111111 191 +#define B11000000 192 +#define B11000001 193 +#define B11000010 194 +#define B11000011 195 +#define B11000100 196 +#define B11000101 197 +#define B11000110 198 +#define B11000111 199 +#define B11001000 200 +#define B11001001 201 +#define B11001010 202 +#define B11001011 203 +#define B11001100 204 +#define B11001101 205 +#define B11001110 206 +#define B11001111 207 +#define B11010000 208 +#define B11010001 209 +#define B11010010 210 +#define B11010011 211 +#define B11010100 212 +#define B11010101 213 +#define B11010110 214 +#define B11010111 215 +#define B11011000 216 +#define B11011001 217 +#define B11011010 218 +#define B11011011 219 +#define B11011100 220 +#define B11011101 221 +#define B11011110 222 +#define B11011111 223 +#define B11100000 224 +#define B11100001 225 +#define B11100010 226 +#define B11100011 227 +#define B11100100 228 +#define B11100101 229 +#define B11100110 230 +#define B11100111 231 +#define B11101000 232 +#define B11101001 233 +#define B11101010 234 +#define B11101011 235 +#define B11101100 236 +#define B11101101 237 +#define B11101110 238 +#define B11101111 239 +#define B11110000 240 +#define B11110001 241 +#define B11110010 242 +#define B11110011 243 +#define B11110100 244 +#define B11110101 245 +#define B11110110 246 +#define B11110111 247 +#define B11111000 248 +#define B11111001 249 +#define B11111010 250 +#define B11111011 251 +#define B11111100 252 +#define B11111101 253 +#define B11111110 254 +#define B11111111 255 + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/main.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/main.cpp new file mode 100644 index 0000000000..3d4e079d2a --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/main.cpp @@ -0,0 +1,20 @@ +#include + +int main(void) +{ + init(); + +#if defined(USBCON) + USBDevice.attach(); +#endif + + setup(); + + for (;;) { + loop(); + if (serialEventRun) serialEventRun(); + } + + return 0; +} + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.cpp b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.cpp new file mode 100644 index 0000000000..0f6d4220ef --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.cpp @@ -0,0 +1,18 @@ +#include + +void * operator new(size_t size) +{ + return malloc(size); +} + +void operator delete(void * ptr) +{ + free(ptr); +} + +int __cxa_guard_acquire(__guard *g) {return !*(char *)(g);}; +void __cxa_guard_release (__guard *g) {*(char *)g = 1;}; +void __cxa_guard_abort (__guard *) {}; + +void __cxa_pure_virtual(void) {}; + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.h new file mode 100644 index 0000000000..cd940ce8b2 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/new.h @@ -0,0 +1,22 @@ +/* Header to define new/delete operators as they aren't provided by avr-gcc by default + Taken from http://www.avrfreaks.net/index.php?name=PNphpBB2&file=viewtopic&t=59453 + */ + +#ifndef NEW_H +#define NEW_H + +#include + +void * operator new(size_t size); +void operator delete(void * ptr); + +__extension__ typedef int __guard __attribute__((mode (__DI__))); + +extern "C" int __cxa_guard_acquire(__guard *); +extern "C" void __cxa_guard_release (__guard *); +extern "C" void __cxa_guard_abort (__guard *); + +extern "C" void __cxa_pure_virtual(void); + +#endif + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring.c b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring.c new file mode 100644 index 0000000000..ac8bb6f9b4 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring.c @@ -0,0 +1,324 @@ +/* + wiring.c - Partial implementation of the Wiring API for the ATmega8. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id$ +*/ + +#include "wiring_private.h" + +// the prescaler is set so that timer0 ticks every 64 clock cycles, and the +// the overflow handler is called every 256 ticks. +#define MICROSECONDS_PER_TIMER0_OVERFLOW (clockCyclesToMicroseconds(64 * 256)) + +// the whole number of milliseconds per timer0 overflow +#define MILLIS_INC (MICROSECONDS_PER_TIMER0_OVERFLOW / 1000) + +// the fractional number of milliseconds per timer0 overflow. we shift right +// by three to fit these numbers into a byte. (for the clock speeds we care +// about - 8 and 16 MHz - this doesn't lose precision.) +#define FRACT_INC ((MICROSECONDS_PER_TIMER0_OVERFLOW % 1000) >> 3) +#define FRACT_MAX (1000 >> 3) + +volatile unsigned long timer0_overflow_count = 0; +volatile unsigned long timer0_millis = 0; +static unsigned char timer0_fract = 0; + +#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__) +SIGNAL(TIM0_OVF_vect) +#else +SIGNAL(TIMER0_OVF_vect) +#endif +{ + // copy these to local variables so they can be stored in registers + // (volatile variables must be read from memory on every access) + unsigned long m = timer0_millis; + unsigned char f = timer0_fract; + + m += MILLIS_INC; + f += FRACT_INC; + if (f >= FRACT_MAX) { + f -= FRACT_MAX; + m += 1; + } + + timer0_fract = f; + timer0_millis = m; + timer0_overflow_count++; +} + +unsigned long millis() +{ + unsigned long m; + uint8_t oldSREG = SREG; + + // disable interrupts while we read timer0_millis or we might get an + // inconsistent value (e.g. in the middle of a write to timer0_millis) + cli(); + m = timer0_millis; + SREG = oldSREG; + + return m; +} + +unsigned long micros() { + unsigned long m; + uint8_t oldSREG = SREG, t; + + cli(); + m = timer0_overflow_count; +#if defined(TCNT0) + t = TCNT0; +#elif defined(TCNT0L) + t = TCNT0L; +#else + #error TIMER 0 not defined +#endif + + +#ifdef TIFR0 + if ((TIFR0 & _BV(TOV0)) && (t < 255)) + m++; +#else + if ((TIFR & _BV(TOV0)) && (t < 255)) + m++; +#endif + + SREG = oldSREG; + + return ((m << 8) + t) * (64 / clockCyclesPerMicrosecond()); +} + +void delay(unsigned long ms) +{ + uint16_t start = (uint16_t)micros(); + + while (ms > 0) { + if (((uint16_t)micros() - start) >= 1000) { + ms--; + start += 1000; + } + } +} + +/* Delay for the given number of microseconds. Assumes a 8 or 16 MHz clock. */ +void delayMicroseconds(unsigned int us) +{ + // calling avrlib's delay_us() function with low values (e.g. 1 or + // 2 microseconds) gives delays longer than desired. + //delay_us(us); +#if F_CPU >= 20000000L + // for the 20 MHz clock on rare Arduino boards + + // for a one-microsecond delay, simply wait 2 cycle and return. The overhead + // of the function call yields a delay of exactly a one microsecond. + __asm__ __volatile__ ( + "nop" "\n\t" + "nop"); //just waiting 2 cycle + if (--us == 0) + return; + + // the following loop takes a 1/5 of a microsecond (4 cycles) + // per iteration, so execute it five times for each microsecond of + // delay requested. + us = (us<<2) + us; // x5 us + + // account for the time taken in the preceeding commands. + us -= 2; + +#elif F_CPU >= 16000000L + // for the 16 MHz clock on most Arduino boards + + // for a one-microsecond delay, simply return. the overhead + // of the function call yields a delay of approximately 1 1/8 us. + if (--us == 0) + return; + + // the following loop takes a quarter of a microsecond (4 cycles) + // per iteration, so execute it four times for each microsecond of + // delay requested. + us <<= 2; + + // account for the time taken in the preceeding commands. + us -= 2; +#else + // for the 8 MHz internal clock on the ATmega168 + + // for a one- or two-microsecond delay, simply return. the overhead of + // the function calls takes more than two microseconds. can't just + // subtract two, since us is unsigned; we'd overflow. + if (--us == 0) + return; + if (--us == 0) + return; + + // the following loop takes half of a microsecond (4 cycles) + // per iteration, so execute it twice for each microsecond of + // delay requested. + us <<= 1; + + // partially compensate for the time taken by the preceeding commands. + // we can't subtract any more than this or we'd overflow w/ small delays. + us--; +#endif + + // busy wait + __asm__ __volatile__ ( + "1: sbiw %0,1" "\n\t" // 2 cycles + "brne 1b" : "=w" (us) : "0" (us) // 2 cycles + ); +} + +void init() +{ + // this needs to be called before setup() or some functions won't + // work there + sei(); + + // on the ATmega168, timer 0 is also used for fast hardware pwm + // (using phase-correct PWM would mean that timer 0 overflowed half as often + // resulting in different millis() behavior on the ATmega8 and ATmega168) +#if defined(TCCR0A) && defined(WGM01) + sbi(TCCR0A, WGM01); + sbi(TCCR0A, WGM00); +#endif + + // set timer 0 prescale factor to 64 +#if defined(__AVR_ATmega128__) + // CPU specific: different values for the ATmega128 + sbi(TCCR0, CS02); +#elif defined(TCCR0) && defined(CS01) && defined(CS00) + // this combination is for the standard atmega8 + sbi(TCCR0, CS01); + sbi(TCCR0, CS00); +#elif defined(TCCR0B) && defined(CS01) && defined(CS00) + // this combination is for the standard 168/328/1280/2560 + sbi(TCCR0B, CS01); + sbi(TCCR0B, CS00); +#elif defined(TCCR0A) && defined(CS01) && defined(CS00) + // this combination is for the __AVR_ATmega645__ series + sbi(TCCR0A, CS01); + sbi(TCCR0A, CS00); +#else + #error Timer 0 prescale factor 64 not set correctly +#endif + + // enable timer 0 overflow interrupt +#if defined(TIMSK) && defined(TOIE0) + sbi(TIMSK, TOIE0); +#elif defined(TIMSK0) && defined(TOIE0) + sbi(TIMSK0, TOIE0); +#else + #error Timer 0 overflow interrupt not set correctly +#endif + + // timers 1 and 2 are used for phase-correct hardware pwm + // this is better for motors as it ensures an even waveform + // note, however, that fast pwm mode can achieve a frequency of up + // 8 MHz (with a 16 MHz clock) at 50% duty cycle + +#if defined(TCCR1B) && defined(CS11) && defined(CS10) + TCCR1B = 0; + + // set timer 1 prescale factor to 64 + sbi(TCCR1B, CS11); +#if F_CPU >= 8000000L + sbi(TCCR1B, CS10); +#endif +#elif defined(TCCR1) && defined(CS11) && defined(CS10) + sbi(TCCR1, CS11); +#if F_CPU >= 8000000L + sbi(TCCR1, CS10); +#endif +#endif + // put timer 1 in 8-bit phase correct pwm mode +#if defined(TCCR1A) && defined(WGM10) + sbi(TCCR1A, WGM10); +#elif defined(TCCR1) + #warning this needs to be finished +#endif + + // set timer 2 prescale factor to 64 +#if defined(TCCR2) && defined(CS22) + sbi(TCCR2, CS22); +#elif defined(TCCR2B) && defined(CS22) + sbi(TCCR2B, CS22); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + + // configure timer 2 for phase correct pwm (8-bit) +#if defined(TCCR2) && defined(WGM20) + sbi(TCCR2, WGM20); +#elif defined(TCCR2A) && defined(WGM20) + sbi(TCCR2A, WGM20); +#else + #warning Timer 2 not finished (may not be present on this CPU) +#endif + +#if defined(TCCR3B) && defined(CS31) && defined(WGM30) + sbi(TCCR3B, CS31); // set timer 3 prescale factor to 64 + sbi(TCCR3B, CS30); + sbi(TCCR3A, WGM30); // put timer 3 in 8-bit phase correct pwm mode +#endif + +#if defined(TCCR4A) && defined(TCCR4B) && defined(TCCR4D) /* beginning of timer4 block for 32U4 and similar */ + sbi(TCCR4B, CS42); // set timer4 prescale factor to 64 + sbi(TCCR4B, CS41); + sbi(TCCR4B, CS40); + sbi(TCCR4D, WGM40); // put timer 4 in phase- and frequency-correct PWM mode + sbi(TCCR4A, PWM4A); // enable PWM mode for comparator OCR4A + sbi(TCCR4C, PWM4D); // enable PWM mode for comparator OCR4D +#else /* beginning of timer4 block for ATMEGA1280 and ATMEGA2560 */ +#if defined(TCCR4B) && defined(CS41) && defined(WGM40) + sbi(TCCR4B, CS41); // set timer 4 prescale factor to 64 + sbi(TCCR4B, CS40); + sbi(TCCR4A, WGM40); // put timer 4 in 8-bit phase correct pwm mode +#endif +#endif /* end timer4 block for ATMEGA1280/2560 and similar */ + +#if defined(TCCR5B) && defined(CS51) && defined(WGM50) + sbi(TCCR5B, CS51); // set timer 5 prescale factor to 64 + sbi(TCCR5B, CS50); + sbi(TCCR5A, WGM50); // put timer 5 in 8-bit phase correct pwm mode +#endif + +#if defined(ADCSRA) + // set a2d prescale factor to 128 + // 16 MHz / 128 = 125 KHz, inside the desired 50-200 KHz range. + // XXX: this will not work properly for other clock speeds, and + // this code should use F_CPU to determine the prescale factor. + sbi(ADCSRA, ADPS2); + sbi(ADCSRA, ADPS1); + sbi(ADCSRA, ADPS0); + + // enable a2d conversions + sbi(ADCSRA, ADEN); +#endif + + // the bootloader connects pins 0 and 1 to the USART; disconnect them + // here so they can be used as normal digital i/o; they will be + // reconnected in Serial.begin() +#if defined(UCSRB) + UCSRB = 0; +#elif defined(UCSR0B) + UCSR0B = 0; +#endif +} diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_analog.c b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_analog.c new file mode 100644 index 0000000000..23b01c65a0 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_analog.c @@ -0,0 +1,282 @@ +/* + wiring_analog.c - analog input and output + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +uint8_t analog_reference = DEFAULT; + +void analogReference(uint8_t mode) +{ + // can't actually set the register here because the default setting + // will connect AVCC and the AREF pin, which would cause a short if + // there's something connected to AREF. + analog_reference = mode; +} + +int analogRead(uint8_t pin) +{ + uint8_t low, high; + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) + if (pin >= 54) pin -= 54; // allow for channel or pin numbers +#elif defined(__AVR_ATmega32U4__) + if (pin >= 18) pin -= 18; // allow for channel or pin numbers +#elif defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) + if (pin >= 24) pin -= 24; // allow for channel or pin numbers +#else + if (pin >= 14) pin -= 14; // allow for channel or pin numbers +#endif + +#if defined(__AVR_ATmega32U4__) + pin = analogPinToChannel(pin); + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#elif defined(ADCSRB) && defined(MUX5) + // the MUX5 bit of ADCSRB selects whether we're reading from channels + // 0 to 7 (MUX5 low) or 8 to 15 (MUX5 high). + ADCSRB = (ADCSRB & ~(1 << MUX5)) | (((pin >> 3) & 0x01) << MUX5); +#endif + + // set the analog reference (high two bits of ADMUX) and select the + // channel (low 4 bits). this also sets ADLAR (left-adjust result) + // to 0 (the default). +#if defined(ADMUX) + ADMUX = (analog_reference << 6) | (pin & 0x07); +#endif + + // without a delay, we seem to read from the wrong channel + //delay(1); + +#if defined(ADCSRA) && defined(ADCL) + // start the conversion + sbi(ADCSRA, ADSC); + + // ADSC is cleared when the conversion finishes + while (bit_is_set(ADCSRA, ADSC)); + + // we have to read ADCL first; doing so locks both ADCL + // and ADCH until ADCH is read. reading ADCL second would + // cause the results of each conversion to be discarded, + // as ADCL and ADCH would be locked when it completed. + low = ADCL; + high = ADCH; +#else + // we dont have an ADC, return 0 + low = 0; + high = 0; +#endif + + // combine the two bytes + return (high << 8) | low; +} + +// Right now, PWM output only works on the pins with +// hardware support. These are defined in the appropriate +// pins_*.c file. For the rest of the pins, we default +// to digital output. +void analogWrite(uint8_t pin, int val) +{ + // We need to make sure the PWM output is enabled for those pins + // that support it, as we turn it off when digitally reading or + // writing with them. Also, make sure the pin is in output mode + // for consistenty with Wiring, which doesn't require a pinMode + // call for the analog output pins. + pinMode(pin, OUTPUT); + if (val == 0) + { + digitalWrite(pin, LOW); + } + else if (val == 255) + { + digitalWrite(pin, HIGH); + } + else + { + switch(digitalPinToTimer(pin)) + { + // XXX fix needed for atmega8 + #if defined(TCCR0) && defined(COM00) && !defined(__AVR_ATmega8__) + case TIMER0A: + // connect pwm to pin on timer 0 + sbi(TCCR0, COM00); + OCR0 = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: + // connect pwm to pin on timer 0, channel A + sbi(TCCR0A, COM0A1); + OCR0A = val; // set pwm duty + break; + #endif + + #if defined(TCCR0A) && defined(COM0B1) + case TIMER0B: + // connect pwm to pin on timer 0, channel B + sbi(TCCR0A, COM0B1); + OCR0B = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: + // connect pwm to pin on timer 1, channel A + sbi(TCCR1A, COM1A1); + OCR1A = val; // set pwm duty + break; + #endif + + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: + // connect pwm to pin on timer 1, channel B + sbi(TCCR1A, COM1B1); + OCR1B = val; // set pwm duty + break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: + // connect pwm to pin on timer 2 + sbi(TCCR2, COM21); + OCR2 = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: + // connect pwm to pin on timer 2, channel A + sbi(TCCR2A, COM2A1); + OCR2A = val; // set pwm duty + break; + #endif + + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: + // connect pwm to pin on timer 2, channel B + sbi(TCCR2A, COM2B1); + OCR2B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: + // connect pwm to pin on timer 3, channel A + sbi(TCCR3A, COM3A1); + OCR3A = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: + // connect pwm to pin on timer 3, channel B + sbi(TCCR3A, COM3B1); + OCR3B = val; // set pwm duty + break; + #endif + + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: + // connect pwm to pin on timer 3, channel C + sbi(TCCR3A, COM3C1); + OCR3C = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) + case TIMER4A: + //connect pwm to pin on timer 4, channel A + sbi(TCCR4A, COM4A1); + #if defined(COM4A0) // only used on 32U4 + cbi(TCCR4A, COM4A0); + #endif + OCR4A = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: + // connect pwm to pin on timer 4, channel B + sbi(TCCR4A, COM4B1); + OCR4B = val; // set pwm duty + break; + #endif + + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: + // connect pwm to pin on timer 4, channel C + sbi(TCCR4A, COM4C1); + OCR4C = val; // set pwm duty + break; + #endif + + #if defined(TCCR4C) && defined(COM4D1) + case TIMER4D: + // connect pwm to pin on timer 4, channel D + sbi(TCCR4C, COM4D1); + #if defined(COM4D0) // only used on 32U4 + cbi(TCCR4C, COM4D0); + #endif + OCR4D = val; // set pwm duty + break; + #endif + + + #if defined(TCCR5A) && defined(COM5A1) + case TIMER5A: + // connect pwm to pin on timer 5, channel A + sbi(TCCR5A, COM5A1); + OCR5A = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5B1) + case TIMER5B: + // connect pwm to pin on timer 5, channel B + sbi(TCCR5A, COM5B1); + OCR5B = val; // set pwm duty + break; + #endif + + #if defined(TCCR5A) && defined(COM5C1) + case TIMER5C: + // connect pwm to pin on timer 5, channel C + sbi(TCCR5A, COM5C1); + OCR5C = val; // set pwm duty + break; + #endif + + case NOT_ON_TIMER: + default: + if (val < 128) { + digitalWrite(pin, LOW); + } else { + digitalWrite(pin, HIGH); + } + } + } +} + diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_digital.c b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_digital.c new file mode 100644 index 0000000000..be323b1dfe --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_digital.c @@ -0,0 +1,178 @@ +/* + wiring_digital.c - digital input and output functions + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + Modified 28 September 2010 by Mark Sproul + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#define ARDUINO_MAIN +#include "wiring_private.h" +#include "pins_arduino.h" + +void pinMode(uint8_t pin, uint8_t mode) +{ + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *reg, *out; + + if (port == NOT_A_PIN) return; + + // JWS: can I let the optimizer do this? + reg = portModeRegister(port); + out = portOutputRegister(port); + + if (mode == INPUT) { + uint8_t oldSREG = SREG; + cli(); + *reg &= ~bit; + *out &= ~bit; + SREG = oldSREG; + } else if (mode == INPUT_PULLUP) { + uint8_t oldSREG = SREG; + cli(); + *reg &= ~bit; + *out |= bit; + SREG = oldSREG; + } else { + uint8_t oldSREG = SREG; + cli(); + *reg |= bit; + SREG = oldSREG; + } +} + +// Forcing this inline keeps the callers from having to push their own stuff +// on the stack. It is a good performance win and only takes 1 more byte per +// user than calling. (It will take more bytes on the 168.) +// +// But shouldn't this be moved into pinMode? Seems silly to check and do on +// each digitalread or write. +// +// Mark Sproul: +// - Removed inline. Save 170 bytes on atmega1280 +// - changed to a switch statment; added 32 bytes but much easier to read and maintain. +// - Added more #ifdefs, now compiles for atmega645 +// +//static inline void turnOffPWM(uint8_t timer) __attribute__ ((always_inline)); +//static inline void turnOffPWM(uint8_t timer) +static void turnOffPWM(uint8_t timer) +{ + switch (timer) + { + #if defined(TCCR1A) && defined(COM1A1) + case TIMER1A: cbi(TCCR1A, COM1A1); break; + #endif + #if defined(TCCR1A) && defined(COM1B1) + case TIMER1B: cbi(TCCR1A, COM1B1); break; + #endif + + #if defined(TCCR2) && defined(COM21) + case TIMER2: cbi(TCCR2, COM21); break; + #endif + + #if defined(TCCR0A) && defined(COM0A1) + case TIMER0A: cbi(TCCR0A, COM0A1); break; + #endif + + #if defined(TIMER0B) && defined(COM0B1) + case TIMER0B: cbi(TCCR0A, COM0B1); break; + #endif + #if defined(TCCR2A) && defined(COM2A1) + case TIMER2A: cbi(TCCR2A, COM2A1); break; + #endif + #if defined(TCCR2A) && defined(COM2B1) + case TIMER2B: cbi(TCCR2A, COM2B1); break; + #endif + + #if defined(TCCR3A) && defined(COM3A1) + case TIMER3A: cbi(TCCR3A, COM3A1); break; + #endif + #if defined(TCCR3A) && defined(COM3B1) + case TIMER3B: cbi(TCCR3A, COM3B1); break; + #endif + #if defined(TCCR3A) && defined(COM3C1) + case TIMER3C: cbi(TCCR3A, COM3C1); break; + #endif + + #if defined(TCCR4A) && defined(COM4A1) + case TIMER4A: cbi(TCCR4A, COM4A1); break; + #endif + #if defined(TCCR4A) && defined(COM4B1) + case TIMER4B: cbi(TCCR4A, COM4B1); break; + #endif + #if defined(TCCR4A) && defined(COM4C1) + case TIMER4C: cbi(TCCR4A, COM4C1); break; + #endif + #if defined(TCCR4C) && defined(COM4D1) + case TIMER4D: cbi(TCCR4C, COM4D1); break; + #endif + + #if defined(TCCR5A) + case TIMER5A: cbi(TCCR5A, COM5A1); break; + case TIMER5B: cbi(TCCR5A, COM5B1); break; + case TIMER5C: cbi(TCCR5A, COM5C1); break; + #endif + } +} + +void digitalWrite(uint8_t pin, uint8_t val) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + volatile uint8_t *out; + + if (port == NOT_A_PIN) return; + + // If the pin that support PWM output, we need to turn it off + // before doing a digital write. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + out = portOutputRegister(port); + + uint8_t oldSREG = SREG; + cli(); + + if (val == LOW) { + *out &= ~bit; + } else { + *out |= bit; + } + + SREG = oldSREG; +} + +int digitalRead(uint8_t pin) +{ + uint8_t timer = digitalPinToTimer(pin); + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + + if (port == NOT_A_PIN) return LOW; + + // If the pin that support PWM output, we need to turn it off + // before getting a digital reading. + if (timer != NOT_ON_TIMER) turnOffPWM(timer); + + if (*portInputRegister(port) & bit) return HIGH; + return LOW; +} diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_private.h b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_private.h new file mode 100644 index 0000000000..f678265679 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_private.h @@ -0,0 +1,71 @@ +/* + wiring_private.h - Internal header file. + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 239 2007-01-12 17:58:39Z mellis $ +*/ + +#ifndef WiringPrivate_h +#define WiringPrivate_h + +#include +#include +#include +#include + +#include "Arduino.h" + +#ifdef __cplusplus +extern "C"{ +#endif + +#ifndef cbi +#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) +#endif +#ifndef sbi +#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) +#endif + +#define EXTERNAL_INT_0 0 +#define EXTERNAL_INT_1 1 +#define EXTERNAL_INT_2 2 +#define EXTERNAL_INT_3 3 +#define EXTERNAL_INT_4 4 +#define EXTERNAL_INT_5 5 +#define EXTERNAL_INT_6 6 +#define EXTERNAL_INT_7 7 + +#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) +#define EXTERNAL_NUM_INTERRUPTS 8 +#elif defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644P__) +#define EXTERNAL_NUM_INTERRUPTS 3 +#elif defined(__AVR_ATmega32U4__) +#define EXTERNAL_NUM_INTERRUPTS 4 +#else +#define EXTERNAL_NUM_INTERRUPTS 2 +#endif + +typedef void (*voidFuncPtr)(void); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_pulse.c b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_pulse.c new file mode 100644 index 0000000000..0d968865d2 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_pulse.c @@ -0,0 +1,69 @@ +/* + wiring_pulse.c - pulseIn() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" +#include "pins_arduino.h" + +/* Measures the length (in microseconds) of a pulse on the pin; state is HIGH + * or LOW, the type of pulse to measure. Works on pulses from 2-3 microseconds + * to 3 minutes in length, but must be called at least a few dozen microseconds + * before the start of the pulse. */ +unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout) +{ + // cache the port and bit of the pin in order to speed up the + // pulse width measuring loop and achieve finer resolution. calling + // digitalRead() instead yields much coarser resolution. + uint8_t bit = digitalPinToBitMask(pin); + uint8_t port = digitalPinToPort(pin); + uint8_t stateMask = (state ? bit : 0); + unsigned long width = 0; // keep initialization out of time critical area + + // convert the timeout from microseconds to a number of times through + // the initial loop; it takes 16 clock cycles per iteration. + unsigned long numloops = 0; + unsigned long maxloops = microsecondsToClockCycles(timeout) / 16; + + // wait for any previous pulse to end + while ((*portInputRegister(port) & bit) == stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to start + while ((*portInputRegister(port) & bit) != stateMask) + if (numloops++ == maxloops) + return 0; + + // wait for the pulse to stop + while ((*portInputRegister(port) & bit) == stateMask) { + if (numloops++ == maxloops) + return 0; + width++; + } + + // convert the reading to microseconds. The loop has been determined + // to be 20 clock cycles long and have about 16 clocks between the edge + // and the start of the loop. There will be some error introduced by + // the interrupt handlers. + return clockCyclesToMicroseconds(width * 21 + 16); +} diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_shift.c b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_shift.c new file mode 100644 index 0000000000..cfe786758c --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/cores/arduino/wiring_shift.c @@ -0,0 +1,55 @@ +/* + wiring_shift.c - shiftOut() function + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2005-2006 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.c 248 2007-02-03 15:36:30Z mellis $ +*/ + +#include "wiring_private.h" + +uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder) { + uint8_t value = 0; + uint8_t i; + + for (i = 0; i < 8; ++i) { + digitalWrite(clockPin, HIGH); + if (bitOrder == LSBFIRST) + value |= digitalRead(dataPin) << i; + else + value |= digitalRead(dataPin) << (7 - i); + digitalWrite(clockPin, LOW); + } + return value; +} + +void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val) +{ + uint8_t i; + + for (i = 0; i < 8; i++) { + if (bitOrder == LSBFIRST) + digitalWrite(dataPin, !!(val & (1 << i))); + else + digitalWrite(dataPin, !!(val & (1 << (7 - i)))); + + digitalWrite(clockPin, HIGH); + digitalWrite(clockPin, LOW); + } +} diff --git a/ArduinoAddons/Arduino_1.x.x/sanguino/variants/standard/pins_arduino.h b/ArduinoAddons/Arduino_1.x.x/sanguino/variants/standard/pins_arduino.h new file mode 100644 index 0000000000..499952dc94 --- /dev/null +++ b/ArduinoAddons/Arduino_1.x.x/sanguino/variants/standard/pins_arduino.h @@ -0,0 +1,285 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ + + Changelog + ----------- + 11/25/11 - ryan@ryanmsutton.com - Add pins for Sanguino 644P and 1284P + 07/15/12 - ryan@ryanmsutton.com - Updated for arduino0101 +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +#define NOT_A_PIN 0 +#define NOT_A_PORT 0 + +#define NOT_ON_TIMER 0 +#define TIMER0A 1 +#define TIMER0B 2 +#define TIMER1A 3 +#define TIMER1B 4 +#define TIMER2 5 +#define TIMER2A 6 +#define TIMER2B 7 + +#define TIMER3A 8 +#define TIMER3B 9 +#define TIMER3C 10 +#define TIMER4A 11 +#define TIMER4B 12 +#define TIMER4C 13 +#define TIMER5A 14 +#define TIMER5B 15 +#define TIMER5C 16 + +const static uint8_t SS = 4; +const static uint8_t MOSI = 5; +const static uint8_t MISO = 6; +const static uint8_t SCK = 7; + +static const uint8_t SDA = 17; +static const uint8_t SCL = 16; +static const uint8_t LED_BUILTIN = 13; + +static const uint8_t A0 = 31; +static const uint8_t A1 = 30; +static const uint8_t A2 = 29; +static const uint8_t A3 = 28; +static const uint8_t A4 = 27; +static const uint8_t A5 = 26; +static const uint8_t A6 = 25; +static const uint8_t A7 = 24; + +// On the ATmega1280, the addresses of some of the port registers are +// greater than 255, so we can't store them in uint8_t's. +// extern const uint16_t PROGMEM port_to_mode_PGM[]; +// extern const uint16_t PROGMEM port_to_input_PGM[]; +// extern const uint16_t PROGMEM port_to_output_PGM[]; + +// extern const uint8_t PROGMEM digital_pin_to_port_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[]; +// extern const uint8_t PROGMEM digital_pin_to_timer_PGM[]; + +// ATMEL ATMEGA644P / SANGUINO +// +// +---\/---+ +// INT0 (D 0) PB0 1| |40 PA0 (AI 0 / D31) +// INT1 (D 1) PB1 2| |39 PA1 (AI 1 / D30) +// INT2 (D 2) PB2 3| |38 PA2 (AI 2 / D29) +// PWM (D 3) PB3 4| |37 PA3 (AI 3 / D28) +// PWM (D 4) PB4 5| |36 PA4 (AI 4 / D27) +// MOSI (D 5) PB5 6| |35 PA5 (AI 5 / D26) +// MISO (D 6) PB6 7| |34 PA6 (AI 6 / D25) +// SCK (D 7) PB7 8| |33 PA7 (AI 7 / D24) +// RST 9| |32 AREF +// VCC 10| |31 GND +// GND 11| |30 AVCC +// XTAL2 12| |29 PC7 (D 23) +// XTAL1 13| |28 PC6 (D 22) +// RX0 (D 8) PD0 14| |27 PC5 (D 21) TDI +// TX0 (D 9) PD1 15| |26 PC4 (D 20) TDO +// RX1 (D 10) PD2 16| |25 PC3 (D 19) TMS +// TX1 (D 11) PD3 17| |24 PC2 (D 18) TCK +// PWM (D 12) PD4 18| |23 PC1 (D 17) SDA +// PWM (D 13) PD5 19| |22 PC0 (D 16) SCL +// PWM (D 14) PD6 20| |21 PD7 (D 15) PWM +// +--------+ +// +#define NUM_DIGITAL_PINS 24 +#define NUM_ANALOG_INPUTS 8 +#define analogInputToDigitalPin(p) ((p < 7) ? (p) + 24 : -1) + +#define digitalPinHasPWM(p) ((p) == 3 || (p) == 4 || (p) == 12 || (p) == 13 || (p) == 14 || (p) == 15 ) + +#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) <= 31)) ? (&PCICR) : ((uint8_t *)0) ) + +#define digitalPinToPCICRbit(p) ( (((p) >= 24) && ((p) <= 31)) ? 0 : \ + ( (((p) >= 0) && ((p) <= 7)) ? 1 : \ + ( (((p) >= 16) && ((p) <= 23)) ? 2 : \ + ( (((p) >= 8) && ((p) <= 15)) ? 3 : \ + 0 ) ) ) ) + +#define digitalPinToPCMSK(p) ( (((p) >= 24) && ((p) <= 31)) ? (&PCMSK0) : \ + ( (((p) >= 0) && ((p) <= 7)) ? (&PCMSK1) : \ + ( (((p) >= 16) && ((p) <= 23)) ? (&PCMSK2) : \ + ( (((p) >= 8) && ((p) <= 15)) ? (&PCMSK3) : \ + ((uint8_t *)0) ) ) ) ) + + +#define digitalPinToPCMSKbit(p) ( (((p) >= 24) && ((p) <= 31)) ? (31 - (p)) : \ + ( (((p) >= 0) && ((p) <= 7)) ? (p) : \ + ( (((p) >= 16) && ((p) <= 23)) ? ((p) - 16) : \ + ( (((p) >= 8) && ((p) <= 15)) ? ((p) - 8) : \ + 0 ) ) ) ) + +#define PA 1 +#define PB 2 +#define PC 3 +#define PD 4 +#define PE 5 +#define PF 6 +#define PG 7 +#define PH 8 +#define PJ 10 +#define PK 11 +#define PL 12 + +#ifdef ARDUINO_MAIN +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = +{ + NOT_A_PORT, + (uint16_t) &DDRA, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = +{ + NOT_A_PORT, + (uint16_t) &PORTA, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, +}; +const uint16_t PROGMEM port_to_input_PGM[] = +{ + NOT_A_PORT, + (uint16_t) &PINA, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, +}; +const uint8_t PROGMEM digital_pin_to_port_PGM[] = +{ + PB, /* 0 */ + PB, + PB, + PB, + PB, + PB, + PB, + PB, + PD, /* 8 */ + PD, + PD, + PD, + PD, + PD, + PD, + PD, + PC, /* 16 */ + PC, + PC, + PC, + PC, + PC, + PC, + PC, + PA, /* 24 */ + PA, + PA, + PA, + PA, + PA, + PA, + PA /* 31 */ +}; +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = +{ + _BV(0), /* 0, port B */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 8, port D */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(0), /* 16, port C */ + _BV(1), + _BV(2), + _BV(3), + _BV(4), + _BV(5), + _BV(6), + _BV(7), + _BV(7), /* 24, port A */ + _BV(6), + _BV(5), + _BV(4), + _BV(3), + _BV(2), + _BV(1), + _BV(0) +}; +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = +{ + NOT_ON_TIMER, /* 0 - PB0 */ + NOT_ON_TIMER, /* 1 - PB1 */ + NOT_ON_TIMER, /* 2 - PB2 */ + TIMER0A, /* 3 - PB3 */ + TIMER0B, /* 4 - PB4 */ + NOT_ON_TIMER, /* 5 - PB5 */ + NOT_ON_TIMER, /* 6 - PB6 */ + NOT_ON_TIMER, /* 7 - PB7 */ + NOT_ON_TIMER, /* 8 - PD0 */ + NOT_ON_TIMER, /* 9 - PD1 */ + NOT_ON_TIMER, /* 10 - PD2 */ + NOT_ON_TIMER, /* 11 - PD3 */ + TIMER1B, /* 12 - PD4 */ + TIMER1A, /* 13 - PD5 */ + TIMER2B, /* 14 - PD6 */ + TIMER2A, /* 15 - PD7 */ + NOT_ON_TIMER, /* 16 - PC0 */ + NOT_ON_TIMER, /* 17 - PC1 */ + NOT_ON_TIMER, /* 18 - PC2 */ + NOT_ON_TIMER, /* 19 - PC3 */ + NOT_ON_TIMER, /* 20 - PC4 */ + NOT_ON_TIMER, /* 21 - PC5 */ + NOT_ON_TIMER, /* 22 - PC6 */ + NOT_ON_TIMER, /* 23 - PC7 */ + NOT_ON_TIMER, /* 24 - PA0 */ + NOT_ON_TIMER, /* 25 - PA1 */ + NOT_ON_TIMER, /* 26 - PA2 */ + NOT_ON_TIMER, /* 27 - PA3 */ + NOT_ON_TIMER, /* 28 - PA4 */ + NOT_ON_TIMER, /* 29 - PA5 */ + NOT_ON_TIMER, /* 30 - PA6 */ + NOT_ON_TIMER /* 31 - PA7 */ +}; +#endif +#endif diff --git a/Marlin/Makefile b/Marlin/Makefile index 5e271db4a8..a2ed2dc59c 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -171,15 +171,15 @@ F_CPU ?= 16000000 # that derives from that, and their source are present in # the main Marlin source directory ifeq ($(HARDWARE_VARIANT), arduino) -HARDWARE_SRC = $(ARDUINO_INSTALL_DIR)/hardware/arduino/cores/arduino +HARDWARE_DIR = $(ARDUINO_INSTALL_DIR)/hardware else ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true) -HARDWARE_SRC = ../ArduinoAddons/Arduino_1.x.x/$(HARDWARE_VARIANT)/cores/arduino +HARDWARE_DIR = ../ArduinoAddons/Arduino_1.x.x else -HARDWARE_SRC = ../ArduinoAddons/Arduino_0.xx/$(HARDWARE_VARIANT)/cores/arduino +HARDWARE_DIR = ../ArduinoAddons/Arduino_0.xx endif endif - +HARDWARE_SRC = $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/cores/arduino TARGET = $(notdir $(CURDIR)) @@ -190,11 +190,14 @@ TARGET = $(notdir $(CURDIR)) VPATH = . VPATH += $(BUILD_DIR) VPATH += $(HARDWARE_SRC) -VPATH += ../ArduinoAddons/Arduino_0.xx/libraries/LiquidCrystal -VPATH += ../ArduinoAddons/Arduino_0.xx/libraries/SPI +VPATH += $(HARDWARE_DIR)/libraries/LiquidCrystal +VPATH += $(HARDWARE_DIR)/libraries/SPI ifeq ($(HARDWARE_VARIANT), arduino) HARDWARE_SUB_VARIANT ?= mega VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/$(HARDWARE_SUB_VARIANT) +else +HARDWARE_SUB_VARIANT ?= standard +VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT) endif SRC = wiring.c \ wiring_analog.c wiring_digital.c \ diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index c81c95e130..25c5aca636 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -26,7 +26,7 @@ #define HardwareSerial_h // trick to disable the standard HWserial #endif -#if (ARDUINO >= 100) && !defined(__AVR_ATmega644P__) +#if (ARDUINO >= 100) # include "Arduino.h" #else # include "WProgram.h" From 9c34c4f05b65c8783967b5b4840ea2a6f6cc85f7 Mon Sep 17 00:00:00 2001 From: Yuri Valentini Date: Tue, 8 Jan 2013 12:54:31 +0100 Subject: [PATCH 3/3] fixes for ramps compilation using installed arduino ide --- Marlin/Makefile | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Marlin/Makefile b/Marlin/Makefile index a2ed2dc59c..e09d15f067 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -190,8 +190,13 @@ TARGET = $(notdir $(CURDIR)) VPATH = . VPATH += $(BUILD_DIR) VPATH += $(HARDWARE_SRC) +ifeq ($(HARDWARE_VARIANT), arduino) +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal +VPATH += $(ARDUINO_INSTALL_DIR)/libraries/SPI +else VPATH += $(HARDWARE_DIR)/libraries/LiquidCrystal VPATH += $(HARDWARE_DIR)/libraries/SPI +endif ifeq ($(HARDWARE_VARIANT), arduino) HARDWARE_SUB_VARIANT ?= mega VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/$(HARDWARE_SUB_VARIANT)