Update motherboard numbering
This commit is contained in:
Scott Lahteine
parent
c9be936d4a
commit
18e396b102
232
Marlin/Makefile
232
Marlin/Makefile
|
|
@ -122,188 +122,194 @@ ifeq ($(HARDWARE_MOTHERBOARD),0)
|
|||
#
|
||||
|
||||
# MEGA/RAMPS up to 1.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),3)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1000)
|
||||
|
||||
# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),33)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1010)
|
||||
# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),34)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1011)
|
||||
# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),35)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1012)
|
||||
# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),36)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1013)
|
||||
# RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),38)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1014)
|
||||
|
||||
# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),43)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1020)
|
||||
# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),44)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1021)
|
||||
# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),45)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1022)
|
||||
# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),46)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1023)
|
||||
# RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),48)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1024)
|
||||
|
||||
# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),143)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1030)
|
||||
# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),144)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1031)
|
||||
# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),145)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1032)
|
||||
# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),146)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1033)
|
||||
# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),148)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1034)
|
||||
|
||||
#
|
||||
# RAMPS Derivatives - ATmega1280, ATmega2560
|
||||
#
|
||||
|
||||
# 3Drag Controller
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),77)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1100)
|
||||
# Velleman K8200 Controller (derived from 3Drag Controller)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),78)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1101)
|
||||
# Velleman K8400 Controller (derived from 3Drag Controller)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),79)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1102)
|
||||
# 2PrintBeta BAM&DICE with STK drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),401)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1103)
|
||||
# 2PrintBeta BAM&DICE Due with STK drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),402)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1104)
|
||||
# MKS BASE v1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),40)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1105)
|
||||
# MKS v1.4 with A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
|
||||
# MKS v1.5 with Allegro A4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),405)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
|
||||
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),41)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
|
||||
# MKS GEN v1.3 or 1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),47)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
|
||||
# MKS GEN L
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),53)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
|
||||
# zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),504)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
|
||||
# Bigtreetech or BIQU KFB2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
|
||||
# Felix 2.0+ Electronics Board (RAMPS like)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),37)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
|
||||
# Invent-A-Part RigidBoard
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),42)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
|
||||
# Invent-A-Part RigidBoard V2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),52)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
|
||||
# Sainsmart 2-in-1 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),49)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
|
||||
# Ultimaker
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),7)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),71)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
|
||||
MCU ?= atmega1280
|
||||
|
||||
# Azteeg X3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),67)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
||||
# Azteeg X3 Pro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),68)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
|
||||
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),72)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
|
||||
# Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),80)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
|
||||
# Raise3D Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),333)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
|
||||
# Rapide Lite RL200 Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),801)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
|
||||
# Formbot T-Rex 2 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),95)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
|
||||
# Formbot T-Rex 3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),96)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
|
||||
# Formbot Raptor
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),97)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
|
||||
# Formbot Raptor 2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),98)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
|
||||
# bq ZUM Mega 3D
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),503)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),431)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
|
||||
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),343)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
|
||||
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),443)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
|
||||
# TriGorilla Anycubic version 1.4 Rev 1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),444)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
|
||||
# Creality: Ender-4, CR-8
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),243)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),244)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
|
||||
# Dagoma F5
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),245)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
|
||||
# Fysetc F6
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),541)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
|
||||
# Duplicator i3 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),31)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
|
||||
# VORON
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),441)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
|
||||
# TRONXY V3 1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),442)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
|
||||
# Z-Bolt X Series
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),550)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
|
||||
|
||||
#
|
||||
# Other ATmega1280, ATmega2560
|
||||
#
|
||||
|
||||
# Cartesio CN Controls V11
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),111)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1200)
|
||||
# Cartesio CN Controls V12
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),112)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1201)
|
||||
# Cheaptronic v1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),2)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1202)
|
||||
# Cheaptronic v2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),21)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1203)
|
||||
# Makerbot Mightyboard Revision E
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),200)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1204)
|
||||
# Megatronics
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),70)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1205)
|
||||
# Megatronics v2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),701)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1206)
|
||||
# Megatronics v3.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),703)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1207)
|
||||
# Megatronics v3.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),704)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1208)
|
||||
# Megatronics v3.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1209)
|
||||
# Rambo
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),301)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1210)
|
||||
# Mini-Rambo
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),302)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1211)
|
||||
# Mini-Rambo 1.0a
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),303)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1212)
|
||||
# Einsy Rambo
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),304)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1213)
|
||||
# Einsy Retro
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),305)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1214)
|
||||
# Elefu Ra Board (v3)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),23)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1215)
|
||||
# Leapfrog
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),999)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1216)
|
||||
# Mega controller
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),310)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1217)
|
||||
# abee Scoovo X9H
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),321)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1218)
|
||||
# Geeetech GT2560 Rev B for Mecreator2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),73)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1219)
|
||||
# Geeetech GT2560 Rev. A
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),74)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1220)
|
||||
# Geeetech GT2560 Rev. A+ (with auto level probe)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),75)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1221)
|
||||
# Geeetech GT2560 Rev B for A10(M/D)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),76)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1222)
|
||||
# Geeetech GT2560 Rev B for A20(M/D)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),86)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1223)
|
||||
# Einstart retrofit
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),666)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1224)
|
||||
|
||||
#
|
||||
# ATmega1281, ATmega2561
|
||||
#
|
||||
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),702)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1300)
|
||||
MCU ?= atmega1281
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),25)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1310)
|
||||
MCU ?= atmega1281
|
||||
|
||||
#
|
||||
|
|
@ -311,43 +317,43 @@ else ifeq ($(HARDWARE_MOTHERBOARD),25)
|
|||
#
|
||||
|
||||
# Sanguinololu < 1.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),6)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1400)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Sanguinololu 1.2 and above
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),62)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1401)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Melzi
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),63)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1402)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Melzi with ATmega1284 (MaKr3d version)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),66)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1403)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Melzi Creality3D board (for CR-10 etc)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),89)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1404)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Melzi Malyan M150 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),92)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1405)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Tronxy X5S
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),505)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1406)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# STB V1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),64)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1407)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Azteeg X1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),65)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1408)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Anet 1.0 (Melzi clone)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),69)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1409)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
|
||||
|
|
@ -356,51 +362,51 @@ else ifeq ($(HARDWARE_MOTHERBOARD),69)
|
|||
#
|
||||
|
||||
# Gen3 Monolithic Electronics
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),22)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1500)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Gen3+
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),9)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1501)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Gen6
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),5)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1502)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
# Gen6 deluxe
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),51)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1503)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
# Gen7 custom (Alfons3 Version)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),10)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1504)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.1, v1.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),11)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1505)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),12)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1506)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),13)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1507)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega1284p
|
||||
F_CPU ?= 20000000
|
||||
# Alpha OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),90)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1508)
|
||||
HARDWARE_VARIANT ?= SanguinoA
|
||||
MCU ?= atmega644
|
||||
# Final OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),91)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1509)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Sethi 3D_1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),20)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1510)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
|
||||
|
|
@ -409,46 +415,46 @@ else ifeq ($(HARDWARE_MOTHERBOARD),20)
|
|||
#
|
||||
|
||||
# Teensylu
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),8)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1600)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Printrboard (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),81)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1601)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Printrboard Revision F (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),811)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1602)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Brainwave (AT90USB646)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),82)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1603)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb646
|
||||
# Brainwave Pro (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),83)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1604)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# SAV Mk-I (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),84)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1605)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Teensy++2.0 (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),85)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1606)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# 5DPrint D8 Driver Board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),88)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1607)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
|
||||
# UltiMachine Archim1 (with DRV8825 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1591)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),3023)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
IS_MCU = 0
|
||||
# UltiMachine Archim2 (with TMC2130 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1592)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),3024)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
|
|
|
|||
|
|
@ -27,265 +27,265 @@
|
|||
// RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
|
||||
//
|
||||
|
||||
#define BOARD_RAMPS_OLD 3 // MEGA/RAMPS up to 1.2
|
||||
#define BOARD_RAMPS_OLD 1000 // MEGA/RAMPS up to 1.2
|
||||
|
||||
#define BOARD_RAMPS_13_EFB 33 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_13_EEB 34 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_13_EFF 35 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_13_EEF 36 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_13_SF 38 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS_13_EFB 1010 // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_13_EEB 1011 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_13_EFF 1012 // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_13_EEF 1013 // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_13_SF 1014 // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
|
||||
|
||||
#define BOARD_RAMPS_14_EFB 43 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_14_EEB 44 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_14_EFF 45 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_EEF 46 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_SF 48 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS_14_EFB 1020 // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_14_EEB 1021 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_14_EFF 1022 // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_EEF 1023 // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_SF 1024 // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
|
||||
#define BOARD_RAMPS_PLUS_EFB 143 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_PLUS_EEB 144 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_PLUS_EFF 145 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_PLUS_EEF 146 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_PLUS_SF 148 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS_PLUS_EFB 1030 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_PLUS_EEB 1031 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_PLUS_EFF 1032 // RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_PLUS_EEF 1033 // RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_PLUS_SF 1034 // RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
|
||||
|
||||
//
|
||||
// RAMPS Derivatives - ATmega1280, ATmega2560
|
||||
//
|
||||
|
||||
#define BOARD_3DRAG 77 // 3Drag Controller
|
||||
#define BOARD_K8200 78 // Velleman K8200 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_K8400 79 // Velleman K8400 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_MKS_BASE 40 // MKS BASE v1.0
|
||||
#define BOARD_MKS_BASE_14 404 // MKS v1.4 A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 405 // MKS v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 41 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 47 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 53 // MKS GEN L
|
||||
#define BOARD_KFB_2 136 // Bigtreetech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 504 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_FELIX2 37 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 42 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 52 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 49 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 7 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 71 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 67 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 68 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 72 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 80 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 333 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 801 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 95 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 96 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 97 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 98 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 503 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 431 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 343 // TriGorilla Anycubic version 1.3 based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 443 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 444 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 244 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_RAMPS_DAGOMA 245 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 541 // Fysetc F6
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 441 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 442 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 550 // Z-Bolt X Series
|
||||
#define BOARD_3DRAG 1100 // 3Drag Controller
|
||||
#define BOARD_K8200 1101 // Velleman K8200 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_K8400 1102 // Velleman K8400 Controller (derived from 3Drag Controller)
|
||||
#define BOARD_BAM_DICE 1103 // 2PrintBeta BAM&DICE with STK drivers
|
||||
#define BOARD_BAM_DICE_DUE 1104 // 2PrintBeta BAM&DICE Due with STK drivers
|
||||
#define BOARD_MKS_BASE 1105 // MKS BASE v1.0
|
||||
#define BOARD_MKS_BASE_14 1106 // MKS v1.4 with A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_15 1107 // MKS v1.5 with Allegro A4982 stepper drivers
|
||||
#define BOARD_MKS_BASE_HEROIC 1108 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
|
||||
#define BOARD_MKS_GEN_13 1109 // MKS GEN v1.3 or 1.4
|
||||
#define BOARD_MKS_GEN_L 1110 // MKS GEN L
|
||||
#define BOARD_KFB_2 1111 // Bigtreetech or BIQU KFB2.0
|
||||
#define BOARD_ZRIB_V20 1112 // zrib V2.0 control board (Chinese knock off RAMPS replica)
|
||||
#define BOARD_FELIX2 1113 // Felix 2.0+ Electronics Board (RAMPS like)
|
||||
#define BOARD_RIGIDBOARD 1114 // Invent-A-Part RigidBoard
|
||||
#define BOARD_RIGIDBOARD_V2 1115 // Invent-A-Part RigidBoard V2
|
||||
#define BOARD_SAINSMART_2IN1 1116 // Sainsmart 2-in-1 board
|
||||
#define BOARD_ULTIMAKER 1117 // Ultimaker
|
||||
#define BOARD_ULTIMAKER_OLD 1118 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
#define BOARD_AZTEEG_X3 1119 // Azteeg X3
|
||||
#define BOARD_AZTEEG_X3_PRO 1120 // Azteeg X3 Pro
|
||||
#define BOARD_ULTIMAIN_2 1121 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
|
||||
#define BOARD_RUMBA 1122 // Rumba
|
||||
#define BOARD_RUMBA_RAISE3D 1123 // Raise3D N series Rumba derivative
|
||||
#define BOARD_RL200 1124 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
|
||||
#define BOARD_FORMBOT_TREX2PLUS 1125 // Formbot T-Rex 2 Plus
|
||||
#define BOARD_FORMBOT_TREX3 1126 // Formbot T-Rex 3
|
||||
#define BOARD_FORMBOT_RAPTOR 1127 // Formbot Raptor
|
||||
#define BOARD_FORMBOT_RAPTOR2 1128 // Formbot Raptor 2
|
||||
#define BOARD_BQ_ZUM_MEGA_3D 1129 // bq ZUM Mega 3D
|
||||
#define BOARD_MAKEBOARD_MINI 1130 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
#define BOARD_TRIGORILLA_13 1131 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
|
||||
#define BOARD_TRIGORILLA_14 1132 // ... Ver 1.4
|
||||
#define BOARD_TRIGORILLA_14_11 1133 // ... Rev 1.1 (new servo pin order)
|
||||
#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8
|
||||
#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X
|
||||
#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5
|
||||
#define BOARD_FYSETC_F6_13 1137 // Fysetc F6
|
||||
#define BOARD_DUPLICATOR_I3_PLUS 1138 // Wanhao Duplicator i3 Plus
|
||||
#define BOARD_VORON 1139 // VORON Design
|
||||
#define BOARD_TRONXY_V3_1_0 1140 // Tronxy TRONXY-V3-1.0
|
||||
#define BOARD_Z_BOLT_X_SERIES 1141 // Z-Bolt X Series
|
||||
|
||||
//
|
||||
// Other ATmega1280, ATmega2560
|
||||
//
|
||||
|
||||
#define BOARD_CNCONTROLS_11 111 // Cartesio CN Controls V11
|
||||
#define BOARD_CNCONTROLS_12 112 // Cartesio CN Controls V12
|
||||
#define BOARD_CHEAPTRONIC 2 // Cheaptronic v1.0
|
||||
#define BOARD_CHEAPTRONIC_V2 21 // Cheaptronic v2.0
|
||||
#define BOARD_MIGHTYBOARD_REVE 200 // Makerbot Mightyboard Revision E
|
||||
#define BOARD_MEGATRONICS 70 // Megatronics
|
||||
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
|
||||
#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
|
||||
#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1
|
||||
#define BOARD_MEGATRONICS_32 705 // Megatronics v3.2
|
||||
#define BOARD_RAMBO 301 // Rambo
|
||||
#define BOARD_MINIRAMBO 302 // Mini-Rambo
|
||||
#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a
|
||||
#define BOARD_EINSY_RAMBO 304 // Einsy Rambo
|
||||
#define BOARD_EINSY_RETRO 305 // Einsy Retro
|
||||
#define BOARD_ELEFU_3 23 // Elefu Ra Board (v3)
|
||||
#define BOARD_LEAPFROG 999 // Leapfrog
|
||||
#define BOARD_MEGACONTROLLER 310 // Mega controller
|
||||
#define BOARD_SCOOVO_X9H 321 // abee Scoovo X9H
|
||||
#define BOARD_GT2560_REV_A 74 // Geeetech GT2560 Rev. A
|
||||
#define BOARD_GT2560_REV_A_PLUS 75 // Geeetech GT2560 Rev. A+ (with auto level probe)
|
||||
#define BOARD_GT2560_V3 76 // Geeetech GT2560 Rev B for A10(M/D)
|
||||
#define BOARD_GT2560_V3_MC2 73 // Geeetech GT2560 Rev B for Mecreator2
|
||||
#define BOARD_GT2560_V3_A20 86 // Geeetech GT2560 Rev B for A20(M/D)
|
||||
#define BOARD_EINSTART_S 666 // Einstart retrofit
|
||||
#define BOARD_CNCONTROLS_11 1200 // Cartesio CN Controls V11
|
||||
#define BOARD_CNCONTROLS_12 1201 // Cartesio CN Controls V12
|
||||
#define BOARD_CHEAPTRONIC 1202 // Cheaptronic v1.0
|
||||
#define BOARD_CHEAPTRONIC_V2 1203 // Cheaptronic v2.0
|
||||
#define BOARD_MIGHTYBOARD_REVE 1204 // Makerbot Mightyboard Revision E
|
||||
#define BOARD_MEGATRONICS 1205 // Megatronics
|
||||
#define BOARD_MEGATRONICS_2 1206 // Megatronics v2.0
|
||||
#define BOARD_MEGATRONICS_3 1207 // Megatronics v3.0
|
||||
#define BOARD_MEGATRONICS_31 1208 // Megatronics v3.1
|
||||
#define BOARD_MEGATRONICS_32 1209 // Megatronics v3.2
|
||||
#define BOARD_RAMBO 1210 // Rambo
|
||||
#define BOARD_MINIRAMBO 1211 // Mini-Rambo
|
||||
#define BOARD_MINIRAMBO_10A 1212 // Mini-Rambo 1.0a
|
||||
#define BOARD_EINSY_RAMBO 1213 // Einsy Rambo
|
||||
#define BOARD_EINSY_RETRO 1214 // Einsy Retro
|
||||
#define BOARD_ELEFU_3 1215 // Elefu Ra Board (v3)
|
||||
#define BOARD_LEAPFROG 1216 // Leapfrog
|
||||
#define BOARD_MEGACONTROLLER 1217 // Mega controller
|
||||
#define BOARD_SCOOVO_X9H 1218 // abee Scoovo X9H
|
||||
#define BOARD_GT2560_REV_A 1219 // Geeetech GT2560 Rev. A
|
||||
#define BOARD_GT2560_REV_A_PLUS 1220 // Geeetech GT2560 Rev. A+ (with auto level probe)
|
||||
#define BOARD_GT2560_V3 1221 // Geeetech GT2560 Rev B for A10(M/D)
|
||||
#define BOARD_GT2560_V3_MC2 1222 // Geeetech GT2560 Rev B for Mecreator2
|
||||
#define BOARD_GT2560_V3_A20 1223 // Geeetech GT2560 Rev B for A20(M/D)
|
||||
#define BOARD_EINSTART_S 1224 // Einstart retrofit
|
||||
|
||||
//
|
||||
// ATmega1281, ATmega2561
|
||||
//
|
||||
|
||||
#define BOARD_MINITRONICS 702 // Minitronics v1.0/1.1
|
||||
#define BOARD_SILVER_GATE 25 // Silvergate v1.0
|
||||
#define BOARD_MINITRONICS 1300 // Minitronics v1.0/1.1
|
||||
#define BOARD_SILVER_GATE 1301 // Silvergate v1.0
|
||||
|
||||
//
|
||||
// Sanguinololu and Derivatives - ATmega644P, ATmega1284P
|
||||
//
|
||||
|
||||
#define BOARD_SANGUINOLOLU_11 6 // Sanguinololu < 1.2
|
||||
#define BOARD_SANGUINOLOLU_12 62 // Sanguinololu 1.2 and above
|
||||
#define BOARD_MELZI 63 // Melzi
|
||||
#define BOARD_MELZI_MAKR3D 66 // Melzi with ATmega1284 (MaKr3d version)
|
||||
#define BOARD_MELZI_CREALITY 89 // Melzi Creality3D board (for CR-10 etc)
|
||||
#define BOARD_MELZI_MALYAN 92 // Melzi Malyan M150 board
|
||||
#define BOARD_MELZI_TRONXY 505 // Tronxy X5S
|
||||
#define BOARD_STB_11 64 // STB V1.1
|
||||
#define BOARD_AZTEEG_X1 65 // Azteeg X1
|
||||
#define BOARD_ANET_10 69 // Anet 1.0 (Melzi clone)
|
||||
#define BOARD_SANGUINOLOLU_11 1400 // Sanguinololu < 1.2
|
||||
#define BOARD_SANGUINOLOLU_12 1401 // Sanguinololu 1.2 and above
|
||||
#define BOARD_MELZI 1402 // Melzi
|
||||
#define BOARD_MELZI_MAKR3D 1403 // Melzi with ATmega1284 (MaKr3d version)
|
||||
#define BOARD_MELZI_CREALITY 1404 // Melzi Creality3D board (for CR-10 etc)
|
||||
#define BOARD_MELZI_MALYAN 1405 // Melzi Malyan M150 board
|
||||
#define BOARD_MELZI_TRONXY 1406 // Tronxy X5S
|
||||
#define BOARD_STB_11 1407 // STB V1.1
|
||||
#define BOARD_AZTEEG_X1 1408 // Azteeg X1
|
||||
#define BOARD_ANET_10 1409 // Anet 1.0 (Melzi clone)
|
||||
|
||||
//
|
||||
// Other ATmega644P, ATmega644, ATmega1284P
|
||||
//
|
||||
|
||||
#define BOARD_GEN3_MONOLITHIC 22 // Gen3 Monolithic Electronics
|
||||
#define BOARD_GEN3_PLUS 9 // Gen3+
|
||||
#define BOARD_GEN6 5 // Gen6
|
||||
#define BOARD_GEN6_DELUXE 51 // Gen6 deluxe
|
||||
#define BOARD_GEN7_CUSTOM 10 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
||||
#define BOARD_GEN7_12 11 // Gen7 v1.1, v1.2
|
||||
#define BOARD_GEN7_13 12 // Gen7 v1.3
|
||||
#define BOARD_GEN7_14 13 // Gen7 v1.4
|
||||
#define BOARD_OMCA_A 90 // Alpha OMCA board
|
||||
#define BOARD_OMCA 91 // Final OMCA board
|
||||
#define BOARD_SETHI 20 // Sethi 3D_1
|
||||
#define BOARD_GEN3_MONOLITHIC 1500 // Gen3 Monolithic Electronics
|
||||
#define BOARD_GEN3_PLUS 1501 // Gen3+
|
||||
#define BOARD_GEN6 1502 // Gen6
|
||||
#define BOARD_GEN6_DELUXE 1503 // Gen6 deluxe
|
||||
#define BOARD_GEN7_CUSTOM 1504 // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
|
||||
#define BOARD_GEN7_12 1505 // Gen7 v1.1, v1.2
|
||||
#define BOARD_GEN7_13 1506 // Gen7 v1.3
|
||||
#define BOARD_GEN7_14 1507 // Gen7 v1.4
|
||||
#define BOARD_OMCA_A 1508 // Alpha OMCA board
|
||||
#define BOARD_OMCA 1509 // Final OMCA board
|
||||
#define BOARD_SETHI 1510 // Sethi 3D_1
|
||||
|
||||
//
|
||||
// Teensyduino - AT90USB1286, AT90USB1286P
|
||||
//
|
||||
|
||||
#define BOARD_TEENSYLU 8 // Teensylu
|
||||
#define BOARD_PRINTRBOARD 81 // Printrboard (AT90USB1286)
|
||||
#define BOARD_PRINTRBOARD_REVF 811 // Printrboard Revision F (AT90USB1286)
|
||||
#define BOARD_BRAINWAVE 82 // Brainwave (AT90USB646)
|
||||
#define BOARD_BRAINWAVE_PRO 85 // Brainwave Pro (AT90USB1286)
|
||||
#define BOARD_SAV_MKI 83 // SAV Mk-I (AT90USB1286)
|
||||
#define BOARD_TEENSY2 84 // Teensy++2.0 (AT90USB1286)
|
||||
#define BOARD_5DPRINT 88 // 5DPrint D8 Driver Board
|
||||
#define BOARD_TEENSYLU 1600 // Teensylu
|
||||
#define BOARD_PRINTRBOARD 1601 // Printrboard (AT90USB1286)
|
||||
#define BOARD_PRINTRBOARD_REVF 1602 // Printrboard Revision F (AT90USB1286)
|
||||
#define BOARD_BRAINWAVE 1603 // Brainwave (AT90USB646)
|
||||
#define BOARD_BRAINWAVE_PRO 1604 // Brainwave Pro (AT90USB1286)
|
||||
#define BOARD_SAV_MKI 1605 // SAV Mk-I (AT90USB1286)
|
||||
#define BOARD_TEENSY2 1606 // Teensy++2.0 (AT90USB1286)
|
||||
#define BOARD_5DPRINT 1607 // 5DPrint D8 Driver Board
|
||||
|
||||
//
|
||||
// LPC1768 ARM Cortex M3
|
||||
//
|
||||
|
||||
#define BOARD_RAMPS_14_RE_ARM_EFB 1743 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEB 1744 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EFF 1745 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEF 1746 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_RE_ARM_SF 1748 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_MKS_SBASE 1750 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_AZSMZ_MINI 1751 // AZSMZ Mini
|
||||
#define BOARD_AZTEEG_X5_GT 1752 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_BIQU_BQ111_A4 1753 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_SELENA_COMPACT 1754 // Selena Compact (Power outputs: Hotend0, Hotend1, Bed0, Bed1, Fan0, Fan1)
|
||||
#define BOARD_COHESION3D_REMIX 1755 // Cohesion3D ReMix
|
||||
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
|
||||
#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard
|
||||
#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan)
|
||||
#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
|
||||
#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
||||
#define BOARD_BIGTREE_SKR_V1_3 1761 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_AZTEEG_X5_MINI 1762 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
|
||||
#define BOARD_MKS_SGEN 1763 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_MKS_SGEN_L 1764 // MKS-SGen-L (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EFB 2000 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEB 2001 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EFF 2002 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_14_RE_ARM_EEF 2003 // Re-ARM with RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_14_RE_ARM_SF 2004 // Re-ARM with RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_MKS_SBASE 2005 // MKS-Sbase (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_AZSMZ_MINI 2006 // AZSMZ Mini
|
||||
#define BOARD_AZTEEG_X5_GT 2007 // Azteeg X5 GT (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_BIQU_BQ111_A4 2008 // BIQU BQ111-A4 (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_SELENA_COMPACT 2009 // Selena Compact (Power outputs: Hotend0, Hotend1, Bed0, Bed1, Fan0, Fan1)
|
||||
#define BOARD_COHESION3D_REMIX 2010 // Cohesion3D ReMix
|
||||
#define BOARD_COHESION3D_MINI 2011 // Cohesion3D Mini
|
||||
#define BOARD_SMOOTHIEBOARD 2012 // Smoothieboard
|
||||
#define BOARD_AZTEEG_X5_MINI_WIFI 2013 // Azteeg X5 Mini Wifi (Power outputs: Hotend0, Bed, Fan)
|
||||
#define BOARD_BIQU_SKR_V1_1 2014 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
|
||||
#define BOARD_BIQU_B300_V1_0 2015 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
|
||||
#define BOARD_BIGTREE_SKR_V1_3 2016 // BIGTREE SKR_V1.3 (Power outputs: Hotend0, Hotend1, Fan, Bed)
|
||||
#define BOARD_AZTEEG_X5_MINI 2017 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
|
||||
#define BOARD_MKS_SGEN 2018 // MKS-SGen (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_MKS_SGEN_L 2019 // MKS-SGen-L (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
|
||||
//
|
||||
// SAM3X8E ARM Cortex M3
|
||||
//
|
||||
|
||||
#define BOARD_DUE3DOM 1411 // DUE3DOM for Arduino DUE
|
||||
#define BOARD_DUE3DOM_MINI 1412 // DUE3DOM MINI for Arduino DUE
|
||||
#define BOARD_RADDS 1502 // RADDS
|
||||
#define BOARD_RAMPS_FD_V1 1503 // RAMPS-FD v1
|
||||
#define BOARD_RAMPS_FD_V2 1504 // RAMPS-FD v2
|
||||
#define BOARD_RAMPS_SMART_EFB 1523 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_SMART_EEB 1524 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_SMART_EFF 1525 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_SMART_EEF 1526 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_SMART_SF 1528 // RAMPS-SMART (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS_DUO_EFB 1533 // RAMPS Duo (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_DUO_EEB 1534 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_DUO_EFF 1535 // RAMPS Duo (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_DUO_EEF 1536 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_DUO_SF 1538 // RAMPS Duo (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS4DUE_EFB 1543 // RAMPS4DUE (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS4DUE_EEB 1544 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS4DUE_EFF 1545 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS4DUE_EEF 1546 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS4DUE_SF 1548 // RAMPS4DUE (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RURAMPS4D_11 1550 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_RURAMPS4D_13 1551 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_ULTRATRONICS_PRO 1560 // ReprapWorld Ultratronics Pro V1.0
|
||||
#define BOARD_ARCHIM1 1591 // UltiMachine Archim1 (with DRV8825 drivers)
|
||||
#define BOARD_ARCHIM2 1592 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ALLIGATOR 1602 // Alligator Board R2
|
||||
#define BOARD_DUE3DOM 3000 // DUE3DOM for Arduino DUE
|
||||
#define BOARD_DUE3DOM_MINI 3001 // DUE3DOM MINI for Arduino DUE
|
||||
#define BOARD_RADDS 3002 // RADDS
|
||||
#define BOARD_RAMPS_FD_V1 3003 // RAMPS-FD v1
|
||||
#define BOARD_RAMPS_FD_V2 3004 // RAMPS-FD v2
|
||||
#define BOARD_RAMPS_SMART_EFB 3005 // RAMPS-SMART (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_SMART_EEB 3006 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_SMART_EFF 3007 // RAMPS-SMART (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_SMART_EEF 3008 // RAMPS-SMART (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_SMART_SF 3009 // RAMPS-SMART (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS_DUO_EFB 3010 // RAMPS Duo (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS_DUO_EEB 3011 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS_DUO_EFF 3012 // RAMPS Duo (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS_DUO_EEF 3013 // RAMPS Duo (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS_DUO_SF 3014 // RAMPS Duo (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RAMPS4DUE_EFB 3015 // RAMPS4DUE (Power outputs: Hotend, Fan, Bed)
|
||||
#define BOARD_RAMPS4DUE_EEB 3016 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Bed)
|
||||
#define BOARD_RAMPS4DUE_EFF 3017 // RAMPS4DUE (Power outputs: Hotend, Fan0, Fan1)
|
||||
#define BOARD_RAMPS4DUE_EEF 3018 // RAMPS4DUE (Power outputs: Hotend0, Hotend1, Fan)
|
||||
#define BOARD_RAMPS4DUE_SF 3019 // RAMPS4DUE (Power outputs: Spindle, Controller Fan)
|
||||
#define BOARD_RURAMPS4D_11 3020 // RuRAMPS4Duo v1.1 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_RURAMPS4D_13 3021 // RuRAMPS4Duo v1.3 (Power outputs: Hotend0, Hotend1, Hotend2, Fan0, Fan1, Bed)
|
||||
#define BOARD_ULTRATRONICS_PRO 3022 // ReprapWorld Ultratronics Pro V1.0
|
||||
#define BOARD_ARCHIM1 3023 // UltiMachine Archim1 (with DRV8825 drivers)
|
||||
#define BOARD_ARCHIM2 3024 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ALLIGATOR 3025 // Alligator Board R2
|
||||
|
||||
//
|
||||
// SAM3X8C ARM Cortex M3
|
||||
//
|
||||
|
||||
#define BOARD_PRINTRBOARD_G2 1620 // PRINTRBOARD G2
|
||||
#define BOARD_ADSK 1610 // Arduino DUE Shield Kit (ADSK)
|
||||
#define BOARD_PRINTRBOARD_G2 3100 // PRINTRBOARD G2
|
||||
#define BOARD_ADSK 3101 // Arduino DUE Shield Kit (ADSK)
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M3
|
||||
//
|
||||
|
||||
#define BOARD_STM32F1R 1800 // STM32R Libmaple based STM32F1 controller
|
||||
#define BOARD_MALYAN_M200 1801 // STM32C8T6 Libmaple based stm32f1 controller
|
||||
#define BOARD_STM3R_MINI 1803 // STM32 Libmaple based stm32f1 controller
|
||||
#define BOARD_GTM32_PRO_VB 1805 // STM32F103VET6 controller
|
||||
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
|
||||
#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
|
||||
#define BOARD_MKS_ROBIN_MINI 1813 // MKS Robin Mini / STM32F103VET6
|
||||
#define BOARD_MKS_ROBIN_NANO 1812 // MKS Robin Nano / STM32F103VET6
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 1814 // BigTreeTech SKR Mini v1.1 / STM32F103RC
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 1815 // BigTreeTech SKR Mini E3 / STM32F103RC
|
||||
#define BOARD_JGAURORA_A5S_A1 1820 // JGAurora A5S A1 / STM32F103ZET6
|
||||
#define BOARD_FYSETC_AIO_II 1890 // FYSETC AIO_II
|
||||
#define BOARD_FYSETC_CHEETAH 1891 // FYSETC CHEETAH
|
||||
#define BOARD_STM32F1R 4000 // STM32R Libmaple-based STM32F1 controller
|
||||
#define BOARD_MALYAN_M200 4001 // STM32C8T6 Libmaple-based STM32F1 controller
|
||||
#define BOARD_STM3R_MINI 4002 // STM32 Libmaple-based STM32F1 controller
|
||||
#define BOARD_GTM32_PRO_VB 4003 // STM32F103VET6 controller
|
||||
#define BOARD_MORPHEUS 4004 // STM32F103C8 / STM32F103CB Libmaple-based STM32F1 controller
|
||||
#define BOARD_MKS_ROBIN 4005 // MKS Robin (STM32F103ZET6)
|
||||
#define BOARD_MKS_ROBIN_MINI 4006 // MKS Robin Mini (STM32F103VET6)
|
||||
#define BOARD_MKS_ROBIN_NANO 4007 // MKS Robin Nano (STM32F103VET6)
|
||||
#define BOARD_BIGTREE_SKR_MINI_V1_1 4008 // BigTreeTech SKR Mini v1.1 (STM32F103RC)
|
||||
#define BOARD_BIGTREE_SKR_MINI_E3 4009 // BigTreeTech SKR Mini E3 (STM32F103RC)
|
||||
#define BOARD_JGAURORA_A5S_A1 4010 // JGAurora A5S A1 (STM32F103ZET6)
|
||||
#define BOARD_FYSETC_AIO_II 4011 // FYSETC AIO_II
|
||||
#define BOARD_FYSETC_CHEETAH 4012 // FYSETC CHEETAH
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M4F
|
||||
//
|
||||
|
||||
#define BOARD_TEENSY31_32 1552 // Teensy3.1 and Teensy3.2
|
||||
#define BOARD_TEENSY35_36 841 // Teensy3.5 and Teensy3.6
|
||||
#define BOARD_BEAST 1802 // STM32FxxxVxT6 Libmaple based stm32f4 controller
|
||||
#define BOARD_STM32F4 1804 // STM32 STM32GENERIC based STM32F4 controller
|
||||
#define BOARD_ARMED 1807 // Arm'ed STM32F4 based controller
|
||||
#define BOARD_RUMBA32 1809 // RUMBA32 STM32F4 based controller
|
||||
#define BOARD_BLACK_STM32F407VE 1810 // BLACK_STM32F407VE
|
||||
#define BOARD_BLACK_STM32F407ZE 1811 // BLACK_STM32F407ZE
|
||||
#define BOARD_STEVAL 1866 // STEVAL-3DP001V1 3D PRINTER BOARD
|
||||
#define BOARD_TEENSY31_32 4100 // Teensy3.1 and Teensy3.2
|
||||
#define BOARD_TEENSY35_36 4101 // Teensy3.5 and Teensy3.6
|
||||
#define BOARD_BEAST 4102 // STM32F4xxVxT6 Libmaple-based STM32F4 controller
|
||||
#define BOARD_STM32F4 4103 // STM32 STM32GENERIC-based STM32F4 controller
|
||||
#define BOARD_ARMED 4104 // Arm'ed STM32F4-based controller
|
||||
#define BOARD_RUMBA32 4105 // RUMBA32 STM32F4-based controller
|
||||
#define BOARD_BLACK_STM32F407VE 4106 // BLACK_STM32F407VE
|
||||
#define BOARD_BLACK_STM32F407ZE 4107 // BLACK_STM32F407ZE
|
||||
#define BOARD_STEVAL 4108 // STEVAL-3DP001V1 3D PRINTER BOARD
|
||||
|
||||
//
|
||||
// ARM Cortex M7
|
||||
//
|
||||
|
||||
#define BOARD_THE_BORG 1860 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_REMRAM_V1 1862 // RemRam v1
|
||||
#define BOARD_THE_BORG 5000 // THE-BORG (Power outputs: Hotend0, Hotend1, Bed, Fan)
|
||||
#define BOARD_REMRAM_V1 5001 // RemRam v1
|
||||
|
||||
//
|
||||
// Espressif ESP32 WiFi
|
||||
//
|
||||
#define BOARD_ESP32 1900
|
||||
#define BOARD_ESP32 6000
|
||||
|
||||
//
|
||||
// Simulations
|
||||
//
|
||||
|
||||
#define BOARD_LINUX_RAMPS 2000
|
||||
#define BOARD_LINUX_RAMPS 9999
|
||||
|
||||
#define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board)
|
||||
|
|
|
|||
Loading…
Reference in a new issue