KRATOS32 / K.32 board and LCD controllers (#21334)
This commit is contained in:
K.3D
GitHub
parent
c07f99d5e4
commit
1a23ffd776
|
|
@ -2181,6 +2181,11 @@
|
|||
//
|
||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// K.3D Full Graphic Smart Controller
|
||||
//
|
||||
//#define K3D_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// ReprapWorld Graphical LCD
|
||||
// https://reprapworld.com/?products_details&products_id/1218
|
||||
|
|
@ -2318,7 +2323,7 @@
|
|||
//#define OLED_PANEL_TINYBOY2
|
||||
|
||||
//
|
||||
// MKS OLED 1.3" 128×64 FULL GRAPHICS CONTROLLER
|
||||
// MKS OLED 1.3" 128×64 Full Graphics Controller
|
||||
// https://reprap.org/wiki/MKS_12864OLED
|
||||
//
|
||||
// Tiny, but very sharp OLED display
|
||||
|
|
@ -2327,7 +2332,7 @@
|
|||
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
|
||||
|
||||
//
|
||||
// Zonestar OLED 128×64 FULL GRAPHICS CONTROLLER
|
||||
// Zonestar OLED 128×64 Full Graphics Controller
|
||||
//
|
||||
//#define ZONESTAR_12864LCD // Graphical (DOGM) with ST7920 controller
|
||||
//#define ZONESTAR_12864OLED // 1.3" OLED with SH1106 controller (default)
|
||||
|
|
@ -2344,10 +2349,15 @@
|
|||
//#define OVERLORD_OLED
|
||||
|
||||
//
|
||||
// FYSETC OLED 2.42" 128×64 FULL GRAPHICS CONTROLLER with WS2812 RGB
|
||||
// FYSETC OLED 2.42" 128×64 Full Graphics Controller with WS2812 RGB
|
||||
// Where to find : https://www.aliexpress.com/item/4000345255731.html
|
||||
//#define FYSETC_242_OLED_12864 // Uses the SSD1309 controller
|
||||
|
||||
//
|
||||
// K.3D SSD1309 OLED 2.42" 128×64 Full Graphics Controller
|
||||
//
|
||||
//#define K3D_242_OLED_CONTROLLER // Software SPI
|
||||
|
||||
//=============================================================================
|
||||
//========================== Extensible UI Displays ===========================
|
||||
//=============================================================================
|
||||
|
|
|
|||
|
|
@ -279,6 +279,7 @@
|
|||
#define BOARD_ARCHIM2 3024 // UltiMachine Archim2 (with TMC2130 drivers)
|
||||
#define BOARD_ALLIGATOR 3025 // Alligator Board R2
|
||||
#define BOARD_CNCONTROLS_15D 3026 // Cartesio CN Controls V15 on DUE
|
||||
#define BOARD_KRATOS32 3027 // K.3D Kratos32 (Arduino Due Shield)
|
||||
|
||||
//
|
||||
// SAM3X8C ARM Cortex M3
|
||||
|
|
|
|||
|
|
@ -229,14 +229,18 @@
|
|||
#define BOARD_ST7920_DELAY_2 DELAY_NS(125)
|
||||
#define BOARD_ST7920_DELAY_3 DELAY_NS(125)
|
||||
|
||||
#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, ANET_FULL_GRAPHICS_LCD_ALT_WIRING, BQ_LCD_SMART_CONTROLLER)
|
||||
#elif ANY(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD, ANET_FULL_GRAPHICS_LCD_ALT_WIRING, BQ_LCD_SMART_CONTROLLER, K3D_FULL_GRAPHIC_SMART_CONTROLLER)
|
||||
|
||||
#define IS_RRD_FG_SC 1
|
||||
|
||||
#elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
|
||||
// RepRapDiscount LCD or Graphical LCD with rotary click encoder
|
||||
#define IS_RRD_SC 1 // RepRapDiscount LCD or Graphical LCD with rotary click encoder
|
||||
|
||||
#elif ENABLED(K3D_242_OLED_CONTROLLER)
|
||||
|
||||
#define IS_RRD_SC 1
|
||||
#define U8GLIB_SSD1309
|
||||
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -2372,7 +2372,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
|
|||
+ ENABLED(ULTIPANEL) \
|
||||
+ ENABLED(ULTRA_LCD) \
|
||||
+ ENABLED(YHCB2004) \
|
||||
+ ENABLED(ZONESTAR_LCD)
|
||||
+ ENABLED(ZONESTAR_LCD) \
|
||||
+ ENABLED(K3D_FULL_GRAPHIC_SMART_CONTROLLER) \
|
||||
+ ENABLED(K3D_242_OLED_CONTROLLER)
|
||||
#error "Please select only one LCD controller option."
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -256,7 +256,7 @@ void MarlinUI::init_lcd() {
|
|||
OUT_WRITE(LCD_BACKLIGHT_PIN, DISABLED(DELAYED_BACKLIGHT_INIT)); // Illuminate after reset or right away
|
||||
#endif
|
||||
|
||||
#if ANY(MKS_12864OLED, MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864, ZONESTAR_12864OLED)
|
||||
#if ANY(MKS_12864OLED, MKS_12864OLED_SSD1306, FYSETC_242_OLED_12864, ZONESTAR_12864OLED, K3D_242_OLED_CONTROLLER)
|
||||
SET_OUTPUT(LCD_PINS_DC);
|
||||
#ifndef LCD_RESET_PIN
|
||||
#define LCD_RESET_PIN LCD_PINS_RS
|
||||
|
|
|
|||
|
|
@ -123,9 +123,10 @@
|
|||
#define U8G_CLASS U8GLIB_SSD1306_128X64 // 8 stripes
|
||||
#endif
|
||||
|
||||
#elif ENABLED(FYSETC_242_OLED_12864)
|
||||
#elif EITHER(FYSETC_242_OLED_12864, K3D_242_OLED_CONTROLLER)
|
||||
|
||||
// FYSETC OLED 2.42" 128 × 64 FULL GRAPHICS CONTROLLER
|
||||
// FYSETC OLED 2.42" 128 × 64 Full Graphics Controller
|
||||
// or K3D OLED 2.42" 128 × 64 Full Graphics Controller
|
||||
|
||||
#define FORCE_SOFT_SPI // SW-SPI
|
||||
|
||||
|
|
|
|||
|
|
@ -447,6 +447,8 @@
|
|||
#include "sam/pins_PRINTRBOARD_G2.h" // SAM3X8C env:DUE_USB
|
||||
#elif MB(CNCONTROLS_15D)
|
||||
#include "sam/pins_CNCONTROLS_15D.h" // SAM3X8E env:DUE env:DUE_USB
|
||||
#elif MB(KRATOS32)
|
||||
#include "sam/pins_KRATOS32.h" // SAM3X8E env:DUE env:DUE_USB
|
||||
|
||||
//
|
||||
// STM32 ARM Cortex-M0
|
||||
|
|
|
|||
179
Marlin/src/pins/sam/pins_KRATOS32.h
Normal file
179
Marlin/src/pins/sam/pins_KRATOS32.h
Normal file
|
|
@ -0,0 +1,179 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
/**
|
||||
* KRATOS32
|
||||
*/
|
||||
|
||||
#include "env_validate.h"
|
||||
|
||||
#define BOARD_INFO_NAME "K.3D KRATOS32"
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
#if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM)
|
||||
#define I2C_EEPROM
|
||||
#define MARLIN_EEPROM_SIZE 0x1F400 // 16KB
|
||||
#endif
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 6
|
||||
#define SERVO1_PIN 5
|
||||
#define SERVO2_PIN 39
|
||||
#define SERVO3_PIN 40 // CAMERA_PIN (extended to the top of the LCD module)
|
||||
#define SERVO4_PIN 45 // FIL_RUNOUT_PIN
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN 28
|
||||
#define X_MAX_PIN 34
|
||||
#define Y_MIN_PIN 30
|
||||
#define Y_MAX_PIN 36
|
||||
#define Z_MIN_PIN 32
|
||||
#define Z_MAX_PIN 38
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 24
|
||||
#define X_DIR_PIN 23
|
||||
#define X_ENABLE_PIN 26
|
||||
#ifndef X_CS_PIN
|
||||
#define X_CS_PIN 25
|
||||
#endif
|
||||
|
||||
#define Y_STEP_PIN 17
|
||||
#define Y_DIR_PIN 16
|
||||
#define Y_ENABLE_PIN 22
|
||||
#ifndef Y_CS_PIN
|
||||
#define Y_CS_PIN 27
|
||||
#endif
|
||||
|
||||
#define Z_STEP_PIN 2
|
||||
#define Z_DIR_PIN 3
|
||||
#define Z_ENABLE_PIN 15
|
||||
#ifndef Z_CS_PIN
|
||||
#define Z_CS_PIN 29
|
||||
#endif
|
||||
|
||||
#define E0_STEP_PIN 61
|
||||
#define E0_DIR_PIN 60
|
||||
#define E0_ENABLE_PIN 62
|
||||
#ifndef E0_CS_PIN
|
||||
#define E0_CS_PIN 31
|
||||
#endif
|
||||
|
||||
#define E1_STEP_PIN 64
|
||||
#define E1_DIR_PIN 63
|
||||
#define E1_ENABLE_PIN 65
|
||||
#ifndef E1_CS_PIN
|
||||
#define E1_CS_PIN 37
|
||||
#endif
|
||||
|
||||
#define E2_STEP_PIN 68
|
||||
#define E2_DIR_PIN 67
|
||||
#define E2_ENABLE_PIN 69
|
||||
#ifndef E2_CS_PIN
|
||||
#define E2_CS_PIN 35
|
||||
#endif
|
||||
|
||||
#define E3_STEP_PIN 51
|
||||
#define E3_DIR_PIN 53
|
||||
#define E3_ENABLE_PIN 49
|
||||
#ifndef E3_CS_PIN
|
||||
#define E3_CS_PIN 33
|
||||
#endif
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#define TEMP_0_PIN 0 // Analog Input
|
||||
#define TEMP_1_PIN 1 // Analog Input
|
||||
#define TEMP_2_PIN 2 // Analog Input
|
||||
#define TEMP_3_PIN 3 // Analog Input
|
||||
#define TEMP_BED_PIN 4 // Analog Input
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 13
|
||||
#define HEATER_1_PIN 12
|
||||
#define HEATER_2_PIN 11
|
||||
#define HEATER_3_PIN 10
|
||||
#define HEATER_BED_PIN 7 // BED
|
||||
|
||||
#ifndef FAN_PIN
|
||||
#define FAN_PIN 9
|
||||
#endif
|
||||
#define FAN1_PIN 8
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#ifndef FIL_RUNOUT_PIN
|
||||
#define FIL_RUNOUT_PIN 45 // SERVO4_PIN
|
||||
#endif
|
||||
|
||||
#ifndef PS_ON_PIN
|
||||
#define PS_ON_PIN 59
|
||||
#endif
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#if HAS_WIRED_LCD
|
||||
|
||||
#define BTN_EN1 48
|
||||
#define BTN_EN2 50
|
||||
#define BTN_ENC 46
|
||||
|
||||
#define SDSS 4
|
||||
#define SD_DETECT_PIN 14
|
||||
|
||||
#define BEEPER_PIN 41
|
||||
#define KILL_PIN 66
|
||||
|
||||
#if IS_RRD_FG_SC
|
||||
|
||||
#define LCD_PINS_RS 42
|
||||
#define LCD_PINS_ENABLE 43
|
||||
#define LCD_PINS_D4 44
|
||||
|
||||
#define BTN_BACK 52
|
||||
|
||||
#elif ENABLED(K3D_242_OLED_CONTROLLER)
|
||||
|
||||
#define LCD_PINS_DC 44
|
||||
#define LCD_PINS_RS 42
|
||||
#define DOGLCD_CS 52
|
||||
#define DOGLCD_MOSI 43
|
||||
#define DOGLCD_SCK 47
|
||||
#define DOGLCD_A0 LCD_PINS_DC
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HAS_WIRED_LCD
|
||||
Loading…
Reference in a new issue