From 1bd25fd2b3ce905fb86d49796606e812232eb836 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Thu, 13 Apr 2017 21:06:37 -0500 Subject: [PATCH] Clean up config spacing, section headings, etc. --- Marlin/Configuration.h | 1 - Marlin/Configuration_adv.h | 6 +++--- Marlin/example_configurations/Cartesio/Configuration_adv.h | 2 +- Marlin/example_configurations/Felix/Configuration_adv.h | 2 +- Marlin/example_configurations/Hephestos/Configuration_adv.h | 2 +- .../example_configurations/Hephestos_2/Configuration_adv.h | 2 +- Marlin/example_configurations/K8200/Configuration_adv.h | 2 +- Marlin/example_configurations/K8400/Configuration_adv.h | 2 +- Marlin/example_configurations/RigidBot/Configuration_adv.h | 2 +- Marlin/example_configurations/SCARA/Configuration_adv.h | 2 +- Marlin/example_configurations/TAZ4/Configuration_adv.h | 2 +- Marlin/example_configurations/TinyBoy2/Configuration_adv.h | 6 +++--- Marlin/example_configurations/WITBOX/Configuration_adv.h | 2 +- .../delta/generic/Configuration_adv.h | 2 +- .../delta/kossel_mini/Configuration_adv.h | 2 +- .../delta/kossel_pro/Configuration_adv.h | 2 +- .../delta/kossel_xl/Configuration_adv.h | 2 +- Marlin/example_configurations/makibox/Configuration_adv.h | 2 +- .../tvrrug/Round2/Configuration_adv.h | 2 +- Marlin/example_configurations/wt150/Configuration_adv.h | 6 +++--- 20 files changed, 25 insertions(+), 26 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 0fca8aa5b0..188e17d547 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -695,7 +695,6 @@ //#define Z_MIN_PROBE_ENDSTOP #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - // Enable Z Probe Repeatability test to see how accurate your probe is //#define Z_MIN_PROBE_REPEATABILITY_TEST diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e04620dcaa..cb2b180e47 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -677,7 +677,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) @@ -971,14 +971,14 @@ #endif // ENABLED(HAVE_TMC2130) +// @section L6470 + /** * Enable this section if you have L6470 motor drivers. * You need to import the L6470 library into the Arduino IDE for this. * (https://github.com/ameyer/Arduino-L6470) */ -// @section l6470 - //#define HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER) diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index bfaa39d4c4..20ff965c93 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 3c2610e831..1095c95376 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/Hephestos/Configuration_adv.h b/Marlin/example_configurations/Hephestos/Configuration_adv.h index 95c0c5c05e..104c1dc803 100644 --- a/Marlin/example_configurations/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h index c5d3f5c6c8..90007037e8 100644 --- a/Marlin/example_configurations/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/Hephestos_2/Configuration_adv.h @@ -658,7 +658,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/K8200/Configuration_adv.h b/Marlin/example_configurations/K8200/Configuration_adv.h index 6616b12bfb..0c2cdd2a77 100644 --- a/Marlin/example_configurations/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/K8200/Configuration_adv.h @@ -687,7 +687,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/K8400/Configuration_adv.h b/Marlin/example_configurations/K8400/Configuration_adv.h index 7db7af3110..ea4c7122dc 100644 --- a/Marlin/example_configurations/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/K8400/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 2badf51885..5b79424ad7 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index ba87a8daa1..18c2240415 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/TAZ4/Configuration_adv.h b/Marlin/example_configurations/TAZ4/Configuration_adv.h index e3fcad9811..4c8e8a87e9 100644 --- a/Marlin/example_configurations/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/TAZ4/Configuration_adv.h @@ -682,7 +682,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 4133091a0d..7983ef280d 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -677,7 +677,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) @@ -971,14 +971,14 @@ #endif // ENABLED(HAVE_TMC2130) +// @section L6470 + /** * Enable this section if you have L6470 motor drivers. * You need to import the L6470 library into the Arduino IDE for this. * (https://github.com/ameyer/Arduino-L6470) */ -// @section l6470 - //#define HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER) diff --git a/Marlin/example_configurations/WITBOX/Configuration_adv.h b/Marlin/example_configurations/WITBOX/Configuration_adv.h index 95c0c5c05e..104c1dc803 100644 --- a/Marlin/example_configurations/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/WITBOX/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index b95998e397..b6be3ab9e8 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -694,7 +694,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index b95998e397..b6be3ab9e8 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -694,7 +694,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index c984b940fa..31517b2497 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -681,7 +681,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index d7fb200cb0..f45dbed033 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -676,7 +676,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index c22d6add27..11b8cf0978 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index c85d848d00..f5fd6eac40 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -674,7 +674,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index 605eaee934..d8c93a21b3 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -677,7 +677,7 @@ //#define BEZIER_CURVE_SUPPORT // G38.2 and G38.3 Probe Target -// ENABLE PROBE_DOUBLE_TOUCH if you want G38 to double touch +// Enable PROBE_DOUBLE_TOUCH if you want G38 to double touch //#define G38_PROBE_TARGET #if ENABLED(G38_PROBE_TARGET) #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) @@ -971,14 +971,14 @@ #endif // ENABLED(HAVE_TMC2130) +// @section L6470 + /** * Enable this section if you have L6470 motor drivers. * You need to import the L6470 library into the Arduino IDE for this. * (https://github.com/ameyer/Arduino-L6470) */ -// @section l6470 - //#define HAVE_L6470DRIVER #if ENABLED(HAVE_L6470DRIVER)