Merge pull request #8021 from thinkyhead/bf2_scroll_longnames

[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames

.travis.yml

@@ -230,7 +230,7 @@ script:
   #
   - restore_configs
   - opt_enable G3D_PANEL SDSUPPORT
-  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
+  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
   - opt_set_adv SDSORT_GCODE true
   - opt_set_adv SDSORT_USES_RAM true
   - opt_set_adv SDSORT_USES_STACK true
@@ -241,7 +241,7 @@ script:
   #
   - restore_configs
   - opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
-  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
+  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
   - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
   #
   # REPRAPWORLD_KEYPAD

Marlin/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/default/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -552,6 +554,9 @@
   // This allows hosts to request long names for files and folders with M33
   #define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES true   // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Folger Tech/i3-2020/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -552,6 +554,9 @@
   // This allows hosts to request long names for files and folders with M33
   #define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -520,6 +520,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -544,6 +546,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -544,6 +544,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -565,6 +567,9 @@
   // This allows hosts to request long names for files and folders with M33
   #define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -533,6 +533,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -557,6 +559,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -533,6 +533,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -557,6 +559,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -533,6 +533,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -557,6 +559,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -533,6 +533,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -557,6 +559,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -538,6 +538,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -562,6 +564,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -533,6 +533,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -557,6 +559,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -531,6 +531,8 @@
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
     #define SDSORT_DYNAMIC_RAM false  // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+    #define SDSORT_CACHE_VFATS 2      // Maximum number of 13-byte VFAT entries to use for sorting.
+                                      // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
   // Show a progress bar on HD44780 LCDs for SD printing
@@ -555,6 +557,9 @@
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
+  // Enable this option to scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES
+
   // This option allows you to abort SD printing when any endstop is triggered.
   // This feature must be enabled with "M540 S1" or from the LCD menu.
   // To have any effect, endstops must be enabled during SD printing.

Marlin/src/inc/Conditionals_LCD.h

@@ -62,7 +62,6 @@
   #elif ENABLED(BQ_LCD_SMART_CONTROLLER)
 
     #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-    #define LONG_FILENAME_HOST_SUPPORT
 
   #elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) || ENABLED(AZSMZ_12864)
 

Marlin/src/inc/SanityCheck.h

@@ -301,6 +301,16 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
       #error "SDSORT_CACHE_NAMES requires SDSORT_USES_RAM (which reads the directory into RAM)."
     #endif
   #endif
+
+  #if ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
+    #if SDSORT_CACHE_VFATS < 2
+      #error "SDSORT_CACHE_VFATS must be 2 or greater!"
+    #elif SDSORT_CACHE_VFATS > MAX_VFAT_ENTRIES
+      #undef SDSORT_CACHE_VFATS
+      #define SDSORT_CACHE_VFATS MAX_VFAT_ENTRIES
+      #warning "SDSORT_CACHE_VFATS was reduced to MAX_VFAT_ENTRIES!"
+    #endif
+  #endif
 #endif
 
 /**

Marlin/src/lcd/ultralcd.cpp

@@ -76,12 +76,16 @@ int16_t lcd_preheat_hotend_temp[2], lcd_preheat_bed_temp[2], lcd_preheat_fan_spe
   #endif
 #endif
 
-uint8_t lcd_status_message_level;
+uint8_t lcd_status_update_delay = 1, // First update one loop delayed
+        lcd_status_message_level;    // Higher level overrides lower
 char lcd_status_message[3 * (LCD_WIDTH) + 1] = WELCOME_MSG; // worst case is kana with up to 3*LCD_WIDTH+1
 
 #if ENABLED(STATUS_MESSAGE_SCROLLING)
   uint8_t status_scroll_pos = 0;
 #endif
+#if ENABLED(SCROLL_LONG_FILENAMES)
+  uint8_t filename_scroll_pos, filename_scroll_max, filename_scroll_hash;
+#endif
 
 #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
   uint8_t progress_bar_percent;
@@ -4665,7 +4669,6 @@ void lcd_update() {
 
     // We arrive here every ~100ms when idling often enough.
     // Instead of tracking the changes simply redraw the Info Screen ~1 time a second.
-    static int8_t lcd_status_update_delay = 1; // first update one loop delayed
     if (
       #if ENABLED(ULTIPANEL)
         currentScreen == lcd_status_screen &&
@@ -4681,6 +4684,17 @@ void lcd_update() {
       lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
     }
 
+    #if ENABLED(SCROLL_LONG_FILENAMES)
+      // If scrolling of long file names is enabled and we are in the sd card menu,
+      // cause a refresh to occur until all the text has scrolled into view.
+      if (currentScreen == lcd_sdcard_menu && filename_scroll_pos < filename_scroll_max && !lcd_status_update_delay--) {
+        lcd_status_update_delay = 6;
+        lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
+        filename_scroll_pos++;
+        return_to_status_ms = ms + LCD_TIMEOUT_TO_STATUS;
+      }
+    #endif
+
     // then we want to use 1/2 of the time only.
     uint16_t bbr2 = planner.block_buffer_runtime() >> 1;
 
@@ -4765,7 +4779,7 @@ void lcd_update() {
   } // ELAPSED(ms, next_lcd_update_ms)
 }
 
-void pad_message_string() {
+inline void pad_message_string() {
   uint8_t i = 0, j = 0;
   char c;
   while ((c = lcd_status_message[i]) && j < LCD_WIDTH) {

Marlin/src/lcd/ultralcd_impl_DOGM.h

@@ -935,19 +935,36 @@ static void lcd_implementation_status_screen() {
 
       if (!PAGE_CONTAINS(row_y1, row_y2)) return;
 
-      uint8_t n = LCD_WIDTH - (START_COL) - 1;
+      constexpr uint8_t maxlen = LCD_WIDTH - (START_COL) - 1;
+      const char *outstr = longFilename[0] ? longFilename : filename;
       if (longFilename[0]) {
-        filename = longFilename;
+        #if ENABLED(SCROLL_LONG_FILENAMES)
-        longFilename[n] = '\0'; // cutoff at screen edge
+          if (isSelected) {
+            uint8_t name_hash = row;
+            for (uint8_t l = FILENAME_LENGTH; l--;)
+              name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ filename[l];  // rotate, xor
+            if (filename_scroll_hash != name_hash) {                            // If the hash changed...
+              filename_scroll_hash = name_hash;                                 // Save the new hash
+              filename_scroll_max = max(0, lcd_strlen(longFilename) - maxlen);  // Update the scroll limit
+              filename_scroll_pos = 0;                                          // Reset scroll to the start
+              lcd_status_update_delay = 8;                                      // Don't scroll right away
+            }
+            outstr += filename_scroll_pos;
+          }
+        #else
+          longFilename[maxlen] = '\0'; // cutoff at screen edge
+        #endif
       }
 
       if (isDir) lcd_print(LCD_STR_FOLDER[0]);
 
-      while (char c = *filename) {
+      char c;
+      uint8_t n = maxlen;
+      while (n && (c = *outstr)) {
         n -= lcd_print_and_count(c);
-        filename++;
+        ++outstr;
       }
-      while (n--) u8g.print(' ');
+      while (n) { --n; u8g.print(' '); }
     }
 
     #define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false)

Marlin/src/lcd/ultralcd_impl_HD44780.h

@@ -991,18 +991,37 @@ static void lcd_implementation_status_screen() {
 
     static void lcd_implementation_drawmenu_sd(const bool sel, const uint8_t row, const char* const pstr, const char* filename, char* const longFilename, const uint8_t concat, const char post_char) {
       UNUSED(pstr);
-      uint8_t n = LCD_WIDTH - concat;
       lcd.setCursor(0, row);
       lcd.print(sel ? '>' : ' ');
+
+      uint8_t n = LCD_WIDTH - concat;
+      const char *outstr = longFilename[0] ? longFilename : filename;
       if (longFilename[0]) {
-        filename = longFilename;
+        #if ENABLED(SCROLL_LONG_FILENAMES)
-        longFilename[n] = '\0';
+          if (sel) {
+            uint8_t name_hash = row;
+            for (uint8_t l = FILENAME_LENGTH; l--;)
+              name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ filename[l];  // rotate, xor
+            if (filename_scroll_hash != name_hash) {                            // If the hash changed...
+              filename_scroll_hash = name_hash;                                 // Save the new hash
+              filename_scroll_max = max(0, lcd_strlen(longFilename) - n);  // Update the scroll limit
+              filename_scroll_pos = 0;                                          // Reset scroll to the start
+              lcd_status_update_delay = 8;                                      // Don't scroll right away
             }
-      while (char c = *filename) {
+            outstr += filename_scroll_pos;
+          }
+        #else
+          longFilename[n] = '\0'; // cutoff at screen edge
+        #endif
+      }
+
+      char c;
+      while (n && (c = *outstr)) {
         n -= charset_mapper(c);
-        filename++;
+        ++outstr;
       }
-      while (n--) lcd.write(' ');
+      while (n) { --n; lcd.write(' '); }
+
       lcd.print(post_char);
     }
 

Marlin/src/sd/SdBaseFile.cpp

@@ -1146,7 +1146,7 @@ int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) {
       vfat_t* VFAT = (vfat_t*)dir;
       // Sanity-check the VFAT entry. The first cluster is always set to zero. And the sequence number should be higher than 0
       if (VFAT->firstClusterLow == 0 && (VFAT->sequenceNumber & 0x1F) > 0 && (VFAT->sequenceNumber & 0x1F) <= MAX_VFAT_ENTRIES) {
-        // TODO: Store the filename checksum to verify if a none-long filename aware system modified the file table.
+        // TODO: Store the filename checksum to verify if a long-filename-unaware system modified the file table.
         n = ((VFAT->sequenceNumber & 0x1F) - 1) * (FILENAME_LENGTH);
         for (uint8_t i = 0; i < FILENAME_LENGTH; i++)
           longFilename[n + i] = (i < 5) ? VFAT->name1[i] : (i < 11) ? VFAT->name2[i - 5] : VFAT->name3[i - 11];

Marlin/src/sd/SdFatConfig.h

@@ -21,20 +21,20 @@
  */
 
 /**
+ * SdFatConfig.h
  * Arduino SdFat Library
  * Copyright (C) 2009 by William Greiman
  *
  * This file is part of the Arduino Sd2Card Library
  */
 
-/**
+#ifndef _SDFATCONFIG_H_
- * \file
+#define _SDFATCONFIG_H_
- * \brief configuration definitions
+
- */
+#include "../inc/MarlinConfig.h"
-#ifndef SDFATCONFIG_H
-#define SDFATCONFIG_H
 
 //------------------------------------------------------------------------------
+
 /**
  * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero.
  *
@@ -43,7 +43,9 @@
  * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
  */
 #define USE_MULTIPLE_CARDS 0
+
 //------------------------------------------------------------------------------
+
 /**
  * Call flush for endl if ENDL_CALLS_FLUSH is nonzero
  *
@@ -62,30 +64,40 @@
  * all data to be written to the SD.
  */
 #define ENDL_CALLS_FLUSH 0
+
 //------------------------------------------------------------------------------
+
 /**
  * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero
  */
 #define ALLOW_DEPRECATED_FUNCTIONS 1
+
 //------------------------------------------------------------------------------
+
 /**
  * Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
  * FAT12 has not been well tested.
  */
 #define FAT12_SUPPORT 0
+
 //------------------------------------------------------------------------------
+
 /**
  * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64)
  * or 6 (F_CPU/128).
  */
 #define SPI_SD_INIT_RATE 5
+
 //------------------------------------------------------------------------------
+
 /**
  * Set the SS pin high for hardware SPI.  If SS is chip select for another SPI
  * device this will disable that device during the SD init phase.
  */
 #define SET_SPI_SS_HIGH 1
+
 //------------------------------------------------------------------------------
+
 /**
  * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos.
  * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
@@ -95,36 +107,40 @@
  * but many SD cards will fail with GPS Shield V1.0.
  */
 #define MEGA_SOFT_SPI 0
+
 //------------------------------------------------------------------------------
-/**
+
- * Set USE_SOFTWARE_SPI nonzero to always use software SPI.
+// Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
- */
 #define USE_SOFTWARE_SPI 0
-// define software SPI pins so Mega can use unmodified 168/328 shields
+
-/** Software SPI chip select pin for the SD */
+// Define software SPI pins so Mega can use unmodified 168/328 shields
-#define SOFT_SPI_CS_PIN 10
+#define SOFT_SPI_CS_PIN   10 // Software SPI chip select pin for the SD
-/** Software SPI Master Out Slave In pin */
+#define SOFT_SPI_MOSI_PIN 11 // Software SPI Master Out Slave In pin
-#define SOFT_SPI_MOSI_PIN 11
+#define SOFT_SPI_MISO_PIN 12 // Software SPI Master In Slave Out pin
-/** Software SPI Master In Slave Out pin */
+#define SOFT_SPI_SCK_PIN  13 // Software SPI Clock pin
-#define SOFT_SPI_MISO_PIN 12
+
-/** Software SPI Clock pin */
-#define SOFT_SPI_SCK_PIN 13
 //------------------------------------------------------------------------------
+
 /**
  * The __cxa_pure_virtual function is an error handler that is invoked when
  * a pure virtual function is called.
  */
 #define USE_CXA_PURE_VIRTUAL 1
 
-/** Number of UTF-16 characters per entry */
-#define FILENAME_LENGTH 13
-
 /**
- * Defines for long (vfat) filenames
+ * Defines for 8.3 and long (vfat) filenames
  */
-/** Number of VFAT entries used. Every entry has 13 UTF-16 characters */
-#define MAX_VFAT_ENTRIES (2)
-/** Total size of the buffer used to store the long filenames */
-#define LONG_FILENAME_LENGTH (FILENAME_LENGTH*MAX_VFAT_ENTRIES+1)
 
-#endif // SDFATCONFIG_H
+#define FILENAME_LENGTH 13 // Number of UTF-16 characters per entry
+
+// Number of VFAT entries used. Each entry has 13 UTF-16 characters
+#if ENABLED(SCROLL_LONG_FILENAMES)
+  #define MAX_VFAT_ENTRIES (5)
+#else
+  #define MAX_VFAT_ENTRIES (2)
+#endif
+
+// Total bytes needed to store a single long filename
+#define LONG_FILENAME_LENGTH (FILENAME_LENGTH * MAX_VFAT_ENTRIES + 1)
+
+#endif // _SDFATCONFIG_H_

Marlin/src/sd/cardreader.cpp

@@ -704,7 +704,7 @@ void CardReader::updir() {
             sortnames = new char*[fileCnt];
           #endif
         #elif ENABLED(SDSORT_USES_STACK)
-          char sortnames[fileCnt][LONG_FILENAME_LENGTH];
+          char sortnames[fileCnt][SORTED_LONGNAME_MAXLEN];
         #endif
 
         // Folder sorting needs 1 bit per entry for flags.
@@ -743,7 +743,12 @@ void CardReader::updir() {
               #endif
             #else
               // Copy filenames into the static array
-              strcpy(sortnames[i], LONGEST_FILENAME);
+              #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH
+                strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
+                sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0';
+              #else
+                strcpy(sortnames[i], SORTED_LONGNAME_MAXLEN);
+              #endif
               #if ENABLED(SDSORT_CACHE_NAMES)
                 strcpy(sortshort[i], filename);
               #endif
@@ -834,13 +839,22 @@ void CardReader::updir() {
           #if ENABLED(SDSORT_DYNAMIC_RAM)
             sortnames = new char*[1];
             sortnames[0] = strdup(LONGEST_FILENAME); // malloc
+            #if ENABLED(SDSORT_CACHE_NAMES)
               sortshort = new char*[1];
               sortshort[0] = strdup(filename);       // malloc
+            #endif
             isDir = new uint8_t[1];
           #else
-            strcpy(sortnames[0], LONGEST_FILENAME);
+            #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH
+              strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
+              sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0';
+            #else
+              strcpy(sortnames[0], SORTED_LONGNAME_MAXLEN);
+            #endif
+            #if ENABLED(SDSORT_CACHE_NAMES)
               strcpy(sortshort[0], filename);
             #endif
+          #endif
           isDir[0] = filenameIsDir ? 0x01 : 0x00;
         #endif
       }

Marlin/src/sd/cardreader.h

@@ -108,6 +108,12 @@ private:
       uint8_t sort_order[SDSORT_LIMIT];
     #endif
 
+    #if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES) && DISABLED(SDSORT_DYNAMIC_RAM)
+      #define SORTED_LONGNAME_MAXLEN ((SDSORT_CACHE_VFATS) * (FILENAME_LENGTH) + 1)
+    #else
+      #define SORTED_LONGNAME_MAXLEN LONG_FILENAME_LENGTH
+    #endif
+
     // Cache filenames to speed up SD menus.
     #if ENABLED(SDSORT_USES_RAM)
 
@@ -117,10 +123,10 @@ private:
           char **sortshort, **sortnames;
         #else
           char sortshort[SDSORT_LIMIT][FILENAME_LENGTH];
-          char sortnames[SDSORT_LIMIT][LONG_FILENAME_LENGTH];
+          char sortnames[SDSORT_LIMIT][SORTED_LONGNAME_MAXLEN];
         #endif
       #elif DISABLED(SDSORT_USES_STACK)
-        char sortnames[SDSORT_LIMIT][LONG_FILENAME_LENGTH];
+        char sortnames[SDSORT_LIMIT][SORTED_LONGNAME_MAXLEN];
       #endif
 
       // Folder sorting uses an isDir array when caching items.