Set homing feedrates individually

Marlin/Conditionals.h

@@ -829,8 +829,8 @@
       #define Z_PROBE_OFFSET_RANGE_MAX 20
     #endif
     #ifndef XY_PROBE_SPEED
-      #ifdef HOMING_FEEDRATE_XYZ
+      #ifdef HOMING_FEEDRATE_XY
-        #define XY_PROBE_SPEED HOMING_FEEDRATE_XYZ
+        #define XY_PROBE_SPEED HOMING_FEEDRATE_XY
       #else
         #define XY_PROBE_SPEED 4000
       #endif

Marlin/Configuration.h

@@ -756,7 +756,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings
 

Marlin/Marlin_main.cpp

@@ -306,7 +306,14 @@ static uint8_t cmd_queue_index_r = 0,
  * Feed rates are often configured with mm/m
  * but the planner and stepper like mm/s units.
  */
-const float homing_feedrate_mm_m[] = HOMING_FEEDRATE;
+const float homing_feedrate_mm_m[] = {
+  #if ENABLED(DELTA)
+    HOMING_FEEDRATE_Z, HOMING_FEEDRATE_Z,
+  #else
+    HOMING_FEEDRATE_XY, HOMING_FEEDRATE_XY,
+  #endif
+  HOMING_FEEDRATE_Z, 0
+};
 static float feedrate_mm_m = 1500.0, saved_feedrate_mm_m;
 int feedrate_percentage = 100, saved_feedrate_percentage;
 

Marlin/SanityCheck.h

@@ -682,6 +682,8 @@
   #error "ABS_PREHEAT_FAN_SPEED is now PREHEAT_2_FAN_SPEED. Please update your configuration."
 #elif defined(ENDSTOPS_ONLY_FOR_HOMING)
   #error "ENDSTOPS_ONLY_FOR_HOMING is deprecated. Use (disable) ENDSTOPS_ALWAYS_ON_DEFAULT instead."
+#elif defined(HOMING_FEEDRATE)
+  #error "HOMING_FEEDRATE is deprecated. Set individual rates with HOMING_FEEDRATE_(XY|Z|E) instead."
 #endif
 
 #endif //SANITYCHECK_H

Marlin/example_configurations/Cartesio/Configuration.h

@@ -756,7 +756,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE  {3000, 3000, 600, 20}   // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (10*60)
 
 // default settings
 

Marlin/example_configurations/Felix/Configuration.h

@@ -738,7 +738,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings
 

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -736,7 +736,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings
 

Marlin/example_configurations/Hephestos/Configuration.h

@@ -748,7 +748,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {2000, 2000, 150, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY 2000
+#define HOMING_FEEDRATE_Z  150
 
 // default settings
 

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -750,7 +750,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {150*60, 150*60, 3.3*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (150*60)
+#define HOMING_FEEDRATE_Z  200
 
 // default settings
 

Marlin/example_configurations/K8200/Configuration.h

@@ -773,7 +773,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings
 

Marlin/example_configurations/K8400/Configuration.h

@@ -756,7 +756,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 8*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (8*60)
 
 // default settings
 

Marlin/example_configurations/K8400/Dual-head/Configuration.h

@@ -756,7 +756,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 8*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (8*60)
 
 // default settings
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -756,7 +756,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -753,7 +753,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 15*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (15*60)
 
 // default settings
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -764,7 +764,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {40*60, 40*60, 10*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (40*60)
+#define HOMING_FEEDRATE_Z  (10*60)
 
 // default settings
 

Marlin/example_configurations/TAZ4/Configuration.h

@@ -777,7 +777,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 8*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (8*60)
 
 // default settings
 

Marlin/example_configurations/WITBOX/Configuration.h

@@ -748,7 +748,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {120*60, 120*60, 7.2*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (120*60)
+#define HOMING_FEEDRATE_Z  432
 
 // default settings
 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -756,7 +756,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings
 

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -848,10 +848,8 @@
  * MOVEMENT SETTINGS
  */
 
-// delta homing speeds must be the same on xyz
+// Delta only homes to Z
-#define HOMING_FEEDRATE_XYZ (200*30)
+#define HOMING_FEEDRATE_Z  (200*30)
-#define HOMING_FEEDRATE_E 0
-#define HOMING_FEEDRATE { HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_E }
 
 // default settings
 // delta speeds must be the same on xyz

Marlin/example_configurations/delta/generic/Configuration.h

@@ -842,10 +842,8 @@
  * MOVEMENT SETTINGS
  */
 
-// delta homing speeds must be the same on xyz
+// Delta only homes to Z
-#define HOMING_FEEDRATE_XYZ (200*60)
+#define HOMING_FEEDRATE_Z  (200*60)
-#define HOMING_FEEDRATE_E 0
-#define HOMING_FEEDRATE { HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_E }
 
 // default settings
 // delta speeds must be the same on xyz

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -845,10 +845,8 @@
  * MOVEMENT SETTINGS
  */
 
-// delta homing speeds must be the same on xyz
+// Delta only homes to Z
-#define HOMING_FEEDRATE_XYZ (200*60)
+#define HOMING_FEEDRATE_Z  (200*60)
-#define HOMING_FEEDRATE_E 0
-#define HOMING_FEEDRATE { HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_E }
 
 // default settings
 // delta speeds must be the same on xyz

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -839,10 +839,8 @@
  * MOVEMENT SETTINGS
  */
 
-// delta homing speeds must be the same on xyz
+// Delta only homes to Z
-#define HOMING_FEEDRATE_XYZ (200*60)
+#define HOMING_FEEDRATE_Z  (200*60)
-#define HOMING_FEEDRATE_E 0
-#define HOMING_FEEDRATE { HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_E }
 
 #define XYZ_FULL_STEPS_PER_ROTATION 200
 #define XYZ_MICROSTEPS 32

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -840,10 +840,8 @@
  * MOVEMENT SETTINGS
  */
 
-// delta homing speeds must be the same on xyz
+// Delta only homes to Z
-#define HOMING_FEEDRATE_XYZ (60*60)
+#define HOMING_FEEDRATE_Z  (60*60)
-#define HOMING_FEEDRATE_E 0
-#define HOMING_FEEDRATE { HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_XYZ, HOMING_FEEDRATE_E }
 
 // variables to calculate steps
 #define XYZ_FULL_STEPS_PER_ROTATION 200

Marlin/example_configurations/makibox/Configuration.h

@@ -759,7 +759,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {1500, 1500, 120, 0}  // set the homing speeds (mm/min)   ***** MakiBox A6 *****
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY 1500
+#define HOMING_FEEDRATE_Z  (2*60)
 
 // default settings
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -746,7 +746,9 @@
  * MOVEMENT SETTINGS
  */
 
-#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0}  // set the homing speeds (mm/min)
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // default settings