zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Anycubic Chiron full feature support (#19505)

Browse source
This commit is contained in:
Nick 2020-09-29 00:53:40 +01:00 committed by Scott Lahteine
parent bb90bc6165
commit 2069ab3a15
16 changed files with 1739 additions and 577 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
Marlin/Configuration_adv.h
View file

@ -1166,6 +1166,7 @@
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss

2
Marlin/src/HAL/AVR/pinsDebug.h
View file

@ -26,7 +26,7 @@
#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
#define AVR_ATmega2560_FAMILY_PLUS_70 1
#endif

9
Marlin/src/HAL/AVR/pinsDebug_plus_70.h
View file

@ -22,15 +22,12 @@
* Structures for 2560 family boards that use more than 70 pins
*/
#undef NUM_DIGITAL_PINS
#if MB(BQ_ZUM_MEGA_3D)
#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
#undef NUM_DIGITAL_PINS
#define NUM_DIGITAL_PINS 85
#elif MB(MIGHTYBOARD_REVE)
#undef NUM_DIGITAL_PINS
#define NUM_DIGITAL_PINS 80
#elif MB(MINIRAMBO)
#define NUM_DIGITAL_PINS 85
#elif MB(SCOOVO_X9H)
#define NUM_DIGITAL_PINS 85
#endif
#define PA 1

12
Marlin/src/feature/powerloss.cpp
View file

@ -367,7 +367,9 @@ void PrintJobRecovery::resume() {
gcode.process_subcommands_now_P(PSTR(
"G28R0" // No raise during G28
TERN_(IS_CARTESIAN, "XY") // Don't home Z on Cartesian
#if IS_CARTESIAN && DISABLED(POWER_LOSS_RECOVER_ZHOME)
"XY" // Don't home Z on Cartesian unless overridden
#endif
));
#endif
@ -375,6 +377,12 @@ void PrintJobRecovery::resume() {
// Pretend that all axes are homed
set_all_homed();
#if ENABLED(POWER_LOSS_RECOVER_ZHOME)
// Z has been homed so restore Z to ZsavedPos + POWER_LOSS_ZRAISE
sprintf_P(cmd, PSTR("G1 F500 Z%s"), dtostrf(info.current_position.z + POWER_LOSS_ZRAISE, 1, 3, str_1));
gcode.process_subcommands_now(cmd);
#endif
// Recover volumetric extrusion state
#if DISABLED(NO_VOLUMETRICS)
#if HAS_MULTI_EXTRUDER
@ -481,7 +489,7 @@ void PrintJobRecovery::resume() {
// Move back to the saved Z
dtostrf(info.current_position.z, 1, 3, str_1);
#if Z_HOME_DIR > 0
#if Z_HOME_DIR > 0 || ENABLED(POWER_LOSS_RECOVER_ZHOME)
sprintf_P(cmd, PSTR("G1 Z%s F200"), str_1);
#else
gcode.process_subcommands_now_P(PSTR("G1 Z0 F200"));

538
Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp
View file

@ -21,7 +21,7 @@
*/
/**
* anycubic_chiron_lcd.cpp
* lcd/extui/anycubic_chiron_lcd.cpp
*
* Anycubic Chiron TFT support for Marlin
*/
@ -31,508 +31,90 @@
#if ENABLED(ANYCUBIC_LCD_CHIRON)
#include "ui_api.h"
#include "lib/anycubic_chiron/chiron_tft.h"
#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
#if GRID_MAX_POINTS_X != 5 || GRID_MAX_POINTS_Y != 5
#error ANYCUBIC CHIRON LCD requires a 5x5 bed leveling grid (GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y)
#endif
#else
#error ANYCUBIC CHIRON LCD requires AUTO_BED_LEVELING_BILINEAR enabled
#endif
#if DISABLED(FILAMENT_RUNOUT_SENSOR)
#error ANYCUBIC CHIRON LCD requires FILAMENT_RUNOUT_SENSOR enabled
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
#error ANYCUBIC CHIRON LCD does not currently support POWER_LOSS_RECOVERY
#endif
static bool is_auto_leveling = false;
static bool is_printing_from_sd = false;
static bool is_out_of_filament = false;
static void sendNewLine(void) {
LCD_SERIAL.write('\r');
LCD_SERIAL.write('\n');
}
static void send(const char *str) {
LCD_SERIAL.print(str);
}
static void sendLine(const char *str) {
send(str);
sendNewLine();
}
static void send_P(PGM_P str) {
while (const char c = pgm_read_byte(str++))
LCD_SERIAL.write(c);
}
static void sendLine_P(PGM_P str) {
send_P(str);
sendNewLine();
}
static void sendValue_P(PGM_P prefix, int value) {
send_P(prefix);
LCD_SERIAL.print(value);
}
static void sendValue_P(PGM_P prefix, float value) {
send_P(prefix);
LCD_SERIAL.print(value);
}
static void sendValueLine_P(PGM_P prefix, int value) {
send_P(prefix);
LCD_SERIAL.print(value);
sendNewLine();
}
static void sendValueLine_P(PGM_P prefix, float value) {
send_P(prefix);
LCD_SERIAL.print(value);
sendNewLine();
}
static int parseIntArgument(const char *buffer, char letterId) {
char *p = strchr(buffer, letterId);
if (!p)
return -1;
return atoi(p+1);
}
static float parseFloatArgument(const char *buffer, char letterId) {
char *p = strchr(buffer, letterId);
if (!p)
return NAN;
return strtof(p+1, nullptr);
}
static int mmToHundredths(float x) {
// Round
if (x >= 0)
x += 0.005f;
else
x -= 0.005f;
return (int)(x * 100.0f);
}
static float hundredthsToMm(int x) {
return x / 100.0f;
}
#define SEND_PGM(str) send_P(PSTR(str))
#define SENDLINE_PGM(str) sendLine_P(PSTR(str))
#define SENDVALUE_PGM(prefix, value) sendValue_P(PSTR(prefix), value)
#define SENDVALUELINE_PGM(prefix, value) sendValueLine_P(PSTR(prefix), value)
using namespace Anycubic;
namespace ExtUI {
static void moveAxis(float delta, feedRate_t feedrate, axis_t axis) {
float pos = getAxisPosition_mm(axis);
pos += delta;
setAxisPosition_mm(pos, axis, feedrate);
void onStartup() { Chiron.Startup(); }
void onIdle() { Chiron.IdleLoop(); }
void onPrinterKilled(PGM_P const error, PGM_P const component) {
Chiron.PrinterKilled(error,component);
}
static void handleCmd(const char *rx) {
static FileList fileList;
static char selectedFileShortName[8+1+3+1];
if (rx[0] != 'A') {
SERIAL_ECHOPGM("Unexpected RX: ");
SERIAL_ECHOLN(rx);
return;
}
const int cmd = atoi(&rx[1]);
// Uncomment for debugging RX
//if (cmd > 7 && cmd != 20) {
// SERIAL_ECHOPGM("RX: ");
// SERIAL_ECHOLN(rx);
//}
switch (cmd) {
case 0: // Get Hotend Actual Temperature
SENDVALUELINE_PGM("A0V ", (int)getActualTemp_celsius(E0));
break;
case 1: // Get Hotend Target Temperature
SENDVALUELINE_PGM("A1V ", (int)getTargetTemp_celsius(E0));
break;
case 2: // Get Bed Actual Temperature
SENDVALUELINE_PGM("A2V ", (int)getActualTemp_celsius(BED));
break;
case 3: // Get Bed Target Temperature
SENDVALUELINE_PGM("A3V ", (int)getTargetTemp_celsius(BED));
break;
case 4: // Get Fan Speed
SENDVALUELINE_PGM("A4V ", (int)getTargetFan_percent(FAN0));
break;
case 5: // Get Current Coordinates
SENDVALUE_PGM("A5V X: ", getAxisPosition_mm(X));
SENDVALUE_PGM(" Y: ", getAxisPosition_mm(Y));
SENDVALUE_PGM(" Z: ", getAxisPosition_mm(Z));
sendNewLine();
break;
case 6: // Get SD Card Print Status
if (isPrintingFromMedia())
SENDVALUELINE_PGM("A6V ", (int)getProgress_percent());
else
SENDLINE_PGM("A6V ---");
break;
case 7: // Get Printing Time
if (isPrinting()) {
const int totalMinutes = getProgress_seconds_elapsed() / 60;
SENDVALUE_PGM("A7V ", (int)(totalMinutes/60));
SENDVALUE_PGM(" H ", (int)(totalMinutes%60));
SENDLINE_PGM(" M");
} else {
SENDLINE_PGM("A7V 999:999");
}
break;
case 8: // Get SD Card File List
if (isMediaInserted()) {
const int startIndex = parseIntArgument(rx, 'S');
SENDLINE_PGM("FN ");
for (int i = 0, fileIndex = 0, numFiles = 0; i < (int)fileList.count() && numFiles < 4; i++) {
fileList.seek(i);
if (!fileList.isDir()) {
if (fileIndex >= startIndex) {
sendLine(fileList.shortFilename());
sendLine(fileList.longFilename());
numFiles++;
}
fileIndex++;
}
}
SENDLINE_PGM("END");
} else {
SENDLINE_PGM("J02");
}
break;
case 9: // Pause SD Card Print
if (isPrintingFromMedia()) {
pausePrint();
is_printing_from_sd = false;
SENDLINE_PGM("J05");
} else {
SENDLINE_PGM("J16"); // Print stopped
}
break;
case 10: // Resume SD Card Print
if (is_out_of_filament) {
is_out_of_filament = false;
// Filament change did eject the old filament automatically,
// now continue and load the new one
setUserConfirmed();
SENDLINE_PGM("J04"); // Printing from SD card
} else if (isPrintingFromMediaPaused()) {
resumePrint();
SENDLINE_PGM("J04"); // Printing from SD card
}
break;
case 11: // Stop SD Card Print
if (isPrintingFromMedia()) {
stopPrint();
is_printing_from_sd = false;
SENDLINE_PGM("J16"); // Print stopped
}
break;
//case 12: // Kill
// break;
case 13: // Select File
if (!isPrinting()) {
// Store selected file name
char *p = strchr(rx, ' ');
if (p != nullptr && strlen(p+1) < sizeof(selectedFileShortName)) {
strcpy(selectedFileShortName, p+1);
SENDLINE_PGM("J20"); // Open succeeded
}
else
SENDLINE_PGM("J21"); // Open failed
}
break;
case 14: // Start Print
if (!isPrinting() && strcmp(selectedFileShortName, "") != 0) {
printFile(selectedFileShortName);
is_printing_from_sd = true;
SENDLINE_PGM("J04"); // Printing from SD card
}
break;
case 15: // Resume from power outage
// This is not supported, just report print as completed
SENDLINE_PGM("J16"); // Print stopped
break;
case 16: // Set Hotend Target Temperature
{
int temp = parseIntArgument(rx, 'S');
if (temp >= 0)
setTargetTemp_celsius(temp, E0);
}
break;
case 17: // Set Bed Target Temperature
{
int temp = parseIntArgument(rx, 'S');
if (temp >= 0)
setTargetTemp_celsius(temp, BED);
}
break;
case 18: // Set Fan Speed
{
int temp = parseIntArgument(rx, 'S');
if (temp >= 0)
setTargetFan_percent(temp, FAN0);
}
break;
case 19: // Disable Motors
injectCommands_P(PSTR("M84"));
break;
case 20: // Get/Set Printing Speed
{
int newPerc = parseIntArgument(rx, 'S');
if (newPerc >= 0)
setFeedrate_percent(newPerc);
else
SENDVALUELINE_PGM("A20V ", (int)getFeedrate_percent());
}
break;
case 21: // Home axes
if (!isPrinting()) {
const bool hasX = strchr(rx, 'X') != nullptr,
hasY = strchr(rx, 'Y') != nullptr,
hasZ = strchr(rx, 'Z') != nullptr,
hasC = strchr(rx, 'C') != nullptr;
if (hasX || hasY || hasZ) {
if (hasX) injectCommands_P(PSTR("G28 X"));
if (hasY) injectCommands_P(PSTR("G28 Y"));
if (hasZ) injectCommands_P(PSTR("G28 Z"));
} else if (hasC) {
injectCommands_P(PSTR("G28"));
}
}
break;
case 22: // Move axes
if (!isPrinting()) {
const int feedrate = parseIntArgument(rx, 'F') / 60;
float delta;
if (!isnan(delta = parseFloatArgument(rx, 'X')))
moveAxis(delta, feedrate, X);
else if (!isnan(delta = parseFloatArgument(rx, 'Y')))
moveAxis(delta, feedrate, Y);
else if (!isnan(delta = parseFloatArgument(rx, 'Z')))
moveAxis(delta, feedrate, Z);
}
break;
case 23: // Preheat PLA
setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, E0);
setTargetTemp_celsius(PREHEAT_1_TEMP_BED, BED);
SENDLINE_PGM("OK");
break;
case 24: // Preheat ABS
setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, E0);
setTargetTemp_celsius(PREHEAT_2_TEMP_BED, BED);
SENDLINE_PGM("OK");
break;
case 25: // Cool down
setTargetTemp_celsius(0, E0);
setTargetTemp_celsius(0, BED);
SENDLINE_PGM("J12");
break;
case 26: // Refresh SD Card
fileList.refresh();
break;
//case 27: // Adjust Servo Angles
// break;
//case 28: // Filament Test
// break;
case 29: // Get Bed Autolevel Grid
{
int x = parseIntArgument(rx, 'X'),
y = parseIntArgument(rx, 'Y');
if (x != -1 && y != -1) {
xy_uint8_t coord;
coord.set(x, y);
const int value = mmToHundredths(getMeshPoint(coord));
SENDVALUELINE_PGM("A29V ", value);
}
}
break;
case 30: // Autolevel
if (strchr(rx, 'S')) { // Autoleveling started by clicking "PROBE" and then "OK"
// Note:
// We check for completion by monitoring the command queue.
// Since it will become empty *while* processing the last injected command,
// we enqueue an extra 10ms delay so we can the determine when all the others
// have completed.
if (isMachineHomed())
injectCommands_P(PSTR("G29\nG4 P10"));
else
injectCommands_P(PSTR("G28\nG29\nG4 P10"));
is_auto_leveling = true;
} else { // Entering Autoleveling screen
if (isPrinting())
SENDLINE_PGM("J24"); // Disallow autoleveling
else
SENDLINE_PGM("J26"); // Allow autoleveling
}
break;
case 31: // Set Bed Autolevel Z offset
if (strchr(rx, 'G')) { // Get
SENDVALUELINE_PGM("A31V ", getZOffset_mm());
} else if (strchr(rx, 'S')) { // Set
float delta = parseFloatArgument(rx, 'S');
delta = constrain(delta, -1.0, 1.0);
setZOffset_mm(getZOffset_mm() + delta);
SENDVALUELINE_PGM("A31V ", getZOffset_mm());
} else if (strchr(rx, 'D')) { // Save
injectCommands_P(PSTR("M500"));
}
break;
//case 32: // ?
// break;
case 33: // Get Version Info
SENDLINE_PGM("J33 " SHORT_BUILD_VERSION);
break;
case 34: // Set Bed Autolevel Grid
{
int x = parseIntArgument(rx, 'X'),
y = parseIntArgument(rx, 'Y'),
v = parseIntArgument(rx, 'V');
if (x != -1 && y != -1 && v != -1) { // Set new value
float value = hundredthsToMm(v);
value = constrain(value, -10, 10);
xy_uint8_t coord;
coord.set(x, y);
setMeshPoint(coord, value);
} else if (strchr(rx, 'S')) { // Save (apply new values)
injectCommands_P(PSTR("M500"));
} else if (strchr(rx, 'C')) { // Cancel (discard new values)
injectCommands_P(PSTR("M501"));
}
}
break;
}
}
#define RX_LEN_MAX 63
static void parseSerialRx() {
static char rxBuffer[RX_LEN_MAX+1];
static uint8_t rxLen = 0;
while (LCD_SERIAL.available()) {
const char c = LCD_SERIAL.read();
switch (c) {
case '\r': case '\n':
if (rxLen > 0 && rxLen <= RX_LEN_MAX) {
rxBuffer[rxLen] = '\0'; // Terminate string
handleCmd(rxBuffer);
}
rxLen = 0;
break;
default:
if (rxLen < RX_LEN_MAX)
rxBuffer[rxLen++] = c;
else {
rxLen = 0xFF; // Overrun
SERIAL_ECHOPGM("Warning: dropping long received line");
}
break;
}
}
}
static void detectPrintFromSdCompletion() {
// Note: printFile() queues some commands that actually start the print, so isPrintingFromMedia()
// initially returns false
if (is_printing_from_sd && !commandsInQueue() && !isPrintingFromMedia()) {
is_printing_from_sd = false;
SENDLINE_PGM("J14"); // Print done
}
}
static void detectAutolevelingCompletion() {
if (is_auto_leveling && !commandsInQueue()) {
is_auto_leveling = false;
injectCommands_P(PSTR("M500"));
SENDLINE_PGM("J25"); // Autoleveling done
}
}
void onStartup() {
#ifndef LCD_BAUDRATE
#define LCD_BAUDRATE 115200
#endif
LCD_SERIAL.begin(LCD_BAUDRATE);
sendNewLine();
SENDLINE_PGM("J17"); // Reset
delay_ms(10);
SENDLINE_PGM("J12"); // Ready
}
void onIdle() {
parseSerialRx();
detectAutolevelingCompletion();
detectPrintFromSdCompletion();
}
void onPrinterKilled(PGM_P const error, PGM_P const component) { }
void onMediaInserted() {
SENDLINE_PGM("J00"); // SD Inserted
}
void onMediaError() { }
void onMediaRemoved() {
SENDLINE_PGM("J01"); // SD Removed
}
void onMediaInserted() { Chiron.MediaEvent(AC_media_inserted); }
void onMediaError() { Chiron.MediaEvent(AC_media_error); }
void onMediaRemoved() { Chiron.MediaEvent(AC_media_removed); }
void onPlayTone(const uint16_t frequency, const uint16_t duration) {
tone(BEEPER_PIN, frequency, duration);
#if ENABLED(SPEAKER)
::tone(BEEPER_PIN, frequency, duration);
#endif
}
void onPrintTimerStarted() { }
void onPrintTimerStarted() { Chiron.TimerEvent(AC_timer_started); }
void onPrintTimerPaused() { Chiron.TimerEvent(AC_timer_paused); }
void onPrintTimerStopped() { Chiron.TimerEvent(AC_timer_stopped); }
void onFilamentRunout(const extruder_t) { Chiron.FilamentRunout(); }
void onUserConfirmRequired(const char * const msg) { Chiron.ConfirmationRequest(msg); }
void onStatusChanged(const char * const msg) { Chiron.StatusChange(msg); }
void onPrintTimerPaused() { }
void onFactoryReset() {}
void onPrintTimerStopped() { }
void onStoreSettings(char *buff) {
// Called when saving to EEPROM (i.e. M500). If the ExtUI needs
// permanent data to be stored, it can write up to eeprom_data_size bytes
// into buff.
void onFilamentRunout(const extruder_t extruder) {
is_out_of_filament = true;
SENDLINE_PGM("J23"); // Filament runout
SENDLINE_PGM("J18"); // Print paused
// Note: printer will unload filament automatically
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct));
}
void onUserConfirmRequired(const char * const msg) { }
void onLoadSettings(const char *buff) {
// Called while loading settings from EEPROM. If the ExtUI
// needs to retrieve data, it should copy up to eeprom_data_size bytes
// from buff
void onStatusChanged(const char * const msg) { }
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct));
}
void onFactoryReset() { }
void onConfigurationStoreWritten(bool success) {
// Called after the entire EEPROM has been written,
// whether successful or not.
}
void onStoreSettings(char *buff) { }
void onConfigurationStoreRead(bool success) {
// Called after the entire EEPROM has been read,
// whether successful or not.
}
void onLoadSettings(const char *buff) { }
#if HAS_MESH
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) {
// Called when any mesh points are updated
//SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval);
}
void onConfigurationStoreWritten(bool success) { }
void onConfigurationStoreRead(bool success) { }
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { }
void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) {
// Called to indicate a special condition
//SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " state:", state);
}
#endif
#if ENABLED(POWER_LOSS_RECOVERY)
void onPowerLossResume() { }
// Called on resume from power-loss
void onPowerLossResume() { Chiron.PowerLossRecovery(); }
#endif
#if HAS_PID_HEATING
void onPidTuning(const result_t rst) { }
void onPidTuning(const result_t rst) {
// Called for temperature PID tuning result
}
#endif
}

162
Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp Normal file
View file

@ -0,0 +1,162 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* lcd/extui/lib/FileNavigator.cpp
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
/***************************************************************************
* The AC panel wants files in block of 4 and can only display a flat list *
* This library allows full folder traversal. *
***************************************************************************/
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(ANYCUBIC_LCD_CHIRON)
#include "FileNavigator.h"
#include "chiron_tft.h"
using namespace ExtUI;
namespace Anycubic {
FileList FileNavigator::filelist; // Instance of the Marlin file API
char FileNavigator::currentfoldername[MAX_PATH_LEN]; // Current folder path
uint16_t FileNavigator::lastindex;
uint8_t FileNavigator::folderdepth;
uint16_t FileNavigator::currentindex; // override the panel request
FileNavigator::FileNavigator() { reset(); }
void FileNavigator::reset() {
currentfoldername[0] = '\0';
folderdepth = 0;
currentindex = 0;
lastindex = 0;
// Start at root folder
while (!filelist.isAtRootDir()) filelist.upDir();
refresh();
}
void FileNavigator::refresh() { filelist.refresh(); }
void FileNavigator::getFiles(uint16_t index) {
uint8_t files = 4;
if (index == 0) currentindex = 0;
// Each time we change folder we reset the file index to 0 and keep track
// of the current position as the TFT panel isnt aware of folders trees.
if (index > 0) {
--currentindex; // go back a file to take account off the .. we added to the root.
if (index > lastindex)
currentindex += files;
else
currentindex = currentindex < 4 ? 0 : currentindex - files;
}
lastindex = index;
#if ACDEBUG(AC_FILE)
SERIAL_ECHOLNPAIR("index=", index, " currentindex=", currentindex);
#endif
if (currentindex == 0 && folderdepth > 0) { // Add a link to go up a folder
TFTSer.println("<<");
TFTSer.println("..");
files--;
}
for (uint16_t seek = currentindex; seek < currentindex + files; seek++) {
if (filelist.seek(seek)) {
sendFile();
#if ACDEBUG(AC_FILE)
SERIAL_ECHOLNPAIR("-", seek, " '", filelist.longFilename(), "' '", currentfoldername, "", filelist.shortFilename(), "'\n");
#endif
}
}
}
void FileNavigator::sendFile() {
// send the file and folder info to the panel
// this info will be returned when the file is selected
// Permitted special characters in file name -_*#~
// Panel can display 22 characters per line
if (filelist.isDir()) {
//TFTSer.print(currentfoldername);
TFTSer.println(filelist.shortFilename());
TFTSer.print(filelist.shortFilename());
TFTSer.println("/");
}
else {
// Logical Name
TFTSer.print("/");
if (folderdepth > 0) TFTSer.print(currentfoldername);
TFTSer.println(filelist.shortFilename());
// Display Name
TFTSer.println(filelist.longFilename());
}
}
void FileNavigator::changeDIR(char *folder) {
#if ACDEBUG(AC_FILE)
SERIAL_ECHOLNPAIR("currentfolder: ", currentfoldername, " New: ", folder);
#endif
if (folderdepth >= MAX_FOLDER_DEPTH) return; // limit the folder depth
strcat(currentfoldername, folder);
strcat(currentfoldername, "/");
filelist.changeDir(folder);
refresh();
folderdepth++;
currentindex = 0;
}
void FileNavigator::upDIR() {
filelist.upDir();
refresh();
folderdepth--;
currentindex = 0;
// Remove the last child folder from the stored path
if (folderdepth == 0) {
currentfoldername[0] = '\0';
reset();
}
else {
char *pos = nullptr;
for (uint8_t f = 0; f < folderdepth; f++)
pos = strchr(currentfoldername, '/');
*(pos + 1) = '\0';
}
#if ACDEBUG(AC_FILE)
SERIAL_ECHOLNPAIR("depth: ", folderdepth, " currentfoldername: ", currentfoldername);
#endif
}
char* FileNavigator::getCurrentFolderName() { return currentfoldername; }
}
#endif // ANYCUBIC_LCD_CHIRON

56
Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.h Normal file
View file

@ -0,0 +1,56 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* lcd/extui/lib/FileNavigator.h
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
#include "chiron_tft_defs.h"
#include "../../ui_api.h"
using namespace ExtUI;
namespace Anycubic {
class FileNavigator {
public:
FileNavigator();
void reset();
void getFiles(uint16_t);
void upDIR();
void changeDIR(char *);
void sendFile();
void refresh();
char * getCurrentFolderName();
private:
static FileList filelist;
static char currentfoldername[MAX_PATH_LEN];
static uint16_t lastindex;
static uint8_t folderdepth;
static uint16_t currentindex;
};
extern FileNavigator filenavigator;
}

62
Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.cpp Normal file
View file

@ -0,0 +1,62 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* lcd/extui/lib/Tunes.cpp
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
/***********************************************************************
* A Utility to play tunes using the buzzer in the printer controller. *
* See Tunes.h for note and tune definitions. *
***********************************************************************/
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(ANYCUBIC_LCD_CHIRON)
#include "Tunes.h"
#include "../../ui_api.h"
namespace Anycubic {
void PlayTune(uint8_t beeperPin, const uint16_t *tune, uint8_t speed=1) {
uint8_t pos = 1;
uint16_t wholenotelen = tune[0] / speed;
do {
uint16_t freq = tune[pos];
uint16_t notelen = wholenotelen / tune[pos + 1];
::tone(beeperPin, freq, notelen);
ExtUI::delay_ms(notelen);
pos += 2;
if (pos >= MAX_TUNE_LENGTH) break;
} while (tune[pos] != n_END);
}
}
#endif // ANYCUBIC_LCD_CHIRON

224
Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.h Normal file
View file

@ -0,0 +1,224 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* lcd/extui/lib/Tunes.h
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
/**************************************************************************
* Notes definition from https://pages.mtu.edu/~suits/NoteFreqCalcs.html *
* *
* The format of a tune is: *
* {<whole note time>,<note1>,<length1>, <note2>,<length2>, ... <END>} *
* *
* 1) The first value is the length of a whole note in milliseconds *
* 2) Then a sequence of pitch and duration pairs *
* 3) Finally the END marker so your tunes can be any length up to *
* MAX_TUNE_LEN *
*************************************************************************/
#include <stdint.h>
#define MAX_TUNE_LENGTH 128
// Special notes!
#define n_P 0 // silence or pause
#define n_END 10000 // end of tune marker
// Note duration divisors
#define l_T1 1
#define l_T2 2
#define l_T3 3
#define l_T4 4
#define l_T8 8
#define l_T16 16
// Note Frequency
#define n_C0 16
#define n_CS0 17
#define n_D0 18
#define n_DS0 19
#define n_E0 21
#define n_F0 22
#define n_FS0 23
#define n_G0 25
#define n_GS0 26
#define n_A0 28
#define n_AS0 29
#define n_B0 31
#define n_C1 33
#define n_CS1 35
#define n_D1 37
#define n_DS1 39
#define n_E1 41
#define n_F1 44
#define n_FS1 46
#define n_G1 49
#define n_GS1 52
#define n_A1 55
#define n_AS1 58
#define n_B1 62
#define n_C2 65
#define n_CS2 69
#define n_D2 73
#define n_DS2 78
#define n_E2 82
#define n_F2 87
#define n_FS2 93
#define n_G2 98
#define n_GS2 104
#define n_A2 110
#define n_AS2 117
#define n_B2 123
#define n_C3 131
#define n_CS3 139
#define n_D3 147
#define n_DS3 156
#define n_E3 165
#define n_F3 175
#define n_FS3 185
#define n_G3 196
#define n_GS3 208
#define n_A3 220
#define n_AS3 233
#define n_B3 247
#define n_C4 262
#define n_CS4 277
#define n_D4 294
#define n_DS4 311
#define n_E4 330
#define n_F4 349
#define n_FS4 370
#define n_G4 392
#define n_GS4 415
#define n_A4 440
#define n_AS4 466
#define n_B4 494
#define n_C5 523
#define n_CS5 554
#define n_D5 587
#define n_DS5 622
#define n_E5 659
#define n_F5 698
#define n_FS5 740
#define n_G5 784
#define n_GS5 831
#define n_A5 880
#define n_AS5 932
#define n_B5 988
#define n_C6 1047
#define n_CS6 1109
#define n_D6 1175
#define n_DS6 1245
#define n_E6 1319
#define n_F6 1397
#define n_FS6 1480
#define n_G6 1568
#define n_GS6 1661
#define n_A6 1760
#define n_AS6 1865
#define n_B6 1976
#define n_C7 2093
#define n_CS7 2217
#define n_D7 2349
#define n_DS7 2489
#define n_E7 2637
#define n_F7 2794
#define n_FS7 2960
#define n_G7 3136
#define n_GS7 3322
#define n_A7 3520
#define n_AS7 3729
#define n_B7 3951
#define n_C8 4186
#define n_CS8 4435
#define n_D8 4699
#define n_DS8 4978
#define n_E8 5274
#define n_F8 5587
#define n_FS8 5920
#define n_G8 6272
#define n_GS8 6645
#define n_A8 7040
#define n_AS8 7459
#define n_B8 7902
namespace Anycubic {
void PlayTune(uint8_t beeperPin, const uint16_t *tune, uint8_t speed);
// Only uncomment the tunes you are using to save memory
// This will help you write tunes!
// https://www.apronus.com/music/flashpiano.htm
const uint16_t SOS[] = {
250,
n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T1,
n_G6,l_T1, n_P,l_T3, n_G6,l_T1, n_P,l_T3, n_G6,l_T1, n_P,l_T1,
n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T1,
n_END
};
const uint16_t BeepBeep[] = {
500,
n_C7,l_T8, n_P,l_T16, n_C7,l_T8, n_P,l_T8,
n_END
};
const uint16_t BeepBeepBeeep[] = {
1000,
n_G7,l_T4, n_P,l_T16, n_G7,l_T4, n_P,l_T8, n_G7,l_T2,
n_END
};
const uint16_t Anycubic_PowerOn[] = {
1000,
n_F7,l_T8, n_P,l_T8, n_C7,l_T8, n_P,l_T8, n_D7,l_T8, n_P,l_T8,
n_E7,l_T8, n_P,l_T8, n_D7,l_T4, n_P,l_T4, n_G7,l_T4, n_P,l_T4,
n_A7,l_T2, n_P,l_T1,
n_END
};
const uint16_t GB_PowerOn[] = {
500,
n_C6,l_T4, n_P,l_T16, n_C7,l_T2, n_P,l_T8,
n_END
};
const uint16_t Heater_Timedout[] = {
1000,
n_C6,l_T1,
n_END
};
const uint16_t FilamentOut[] = {
1000,
n_AS7,l_T4, n_P,l_T16, n_FS7,l_T2,
n_END
};
}

896
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp Normal file
View file

@ -0,0 +1,896 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* lcd/extui/lib/chiron_tft.cpp
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
#include "../../../../inc/MarlinConfigPre.h"
#if ENABLED(ANYCUBIC_LCD_CHIRON)
#include "chiron_tft.h"
#include "Tunes.h"
#include "FileNavigator.h"
#include "../../../../gcode/queue.h"
#include "../../../../sd/cardreader.h"
#include "../../../../libs/numtostr.h"
#include "../../../../MarlinCore.h"
namespace Anycubic {
printer_state_t ChironTFT::printer_state;
paused_state_t ChironTFT::pause_state;
heater_state_t ChironTFT::hotend_state;
heater_state_t ChironTFT::hotbed_state;
xy_uint8_t ChironTFT::selectedmeshpoint;
char ChironTFT::selectedfile[MAX_PATH_LEN];
char ChironTFT::panel_command[MAX_CMND_LEN];
uint8_t ChironTFT::command_len;
float ChironTFT::live_Zoffset;
file_menu_t ChironTFT::file_menu;
ChironTFT::ChironTFT(){}
void ChironTFT::Startup() {
selectedfile[0] = '\0';
panel_command[0] = '\0';
command_len = 0;
printer_state = AC_printer_idle;
pause_state = AC_paused_idle;
hotend_state = AC_heater_off;
hotbed_state = AC_heater_off;
live_Zoffset = 0.0;
file_menu = AC_menu_file;
// Setup pins for powerloss detection
// Two IO pins are connected on the Trigorilla Board
// On a power interruption the OUTAGECON_PIN goes low.
#if ENABLED(POWER_LOSS_RECOVERY)
OUT_WRITE(OUTAGECON_PIN, HIGH);
#endif
// Filament runout is handled by Marlin settings in Configuration.h
// set FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
// enable FIL_RUNOUT_PULLUP
TFTSer.begin(115200);
// Signal Board has reset
SendtoTFTLN(AC_msg_main_board_has_reset);
safe_delay(200);
// Enable levelling and Disable end stops during print
// as Z home places nozzle above the bed so we need to allow it past the end stops
injectCommands_P(AC_cmnd_enable_levelling); //M211 S0\n"));
// Startup tunes are defined in Tunes.h
//PlayTune(BEEPER_PIN, Anycubic_PowerOn, 1);
PlayTune(BEEPER_PIN, GB_PowerOn, 1);
#if ACDEBUGLEVEL
SERIAL_ECHOLNPAIR("AC Debug Level ", ACDEBUGLEVEL);
#endif
SendtoTFTLN(AC_msg_ready);
}
void ChironTFT::IdleLoop() {
if (ReadTFTCommand()) {
ProcessPanelRequest();
command_len = 0;
}
CheckHeaters();
}
void ChironTFT::PrinterKilled(PGM_P error,PGM_P component) {
SendtoTFTLN(AC_msg_kill_lcd);
#if ACDEBUG(AC_MARLIN)
SERIAL_ECHOLNPAIR("PrinterKilled()\nerror: ", error , "\ncomponent: ", component);
#endif
}
void ChironTFT::MediaEvent(media_event_t event) {
#if ACDEBUG(AC_MARLIN)
SERIAL_ECHOLNPAIR("ProcessMediaStatus() ", event);
#endif
switch (event) {
case AC_media_inserted:
SendtoTFTLN(AC_msg_sd_card_inserted);
break;
case AC_media_removed:
SendtoTFTLN(AC_msg_sd_card_removed);
break;
case AC_media_error:
SendtoTFTLN(AC_msg_no_sd_card);
break;
}
}
void ChironTFT::TimerEvent(timer_event_t event) {
#if ACDEBUG(AC_MARLIN)
SERIAL_ECHOLNPAIR("TimerEvent() ", event);
SERIAL_ECHOLNPAIR("Printer State: ", printer_state);
#endif
switch (event) {
case AC_timer_started: {
live_Zoffset = 0.0; // reset print offset
setSoftEndstopState(false); // disable endstops to print
printer_state = AC_printer_printing;
SendtoTFTLN(AC_msg_print_from_sd_card);
} break;
case AC_timer_paused: {
printer_state = AC_printer_paused;
pause_state = AC_paused_idle;
SendtoTFTLN(AC_msg_paused);
} break;
case AC_timer_stopped: {
if (printer_state != AC_printer_idle) {
printer_state = AC_printer_stopping;
SendtoTFTLN(AC_msg_print_complete);
}
setSoftEndstopState(true); // enable endstops
} break;
}
}
void ChironTFT::FilamentRunout() {
#if ACDEBUG(AC_MARLIN)
SERIAL_ECHOLNPAIR("FilamentRunout() printer_state ", printer_state);
#endif
// 1 Signal filament out
SendtoTFTLN(isPrintingFromMedia() ? AC_msg_filament_out_alert : AC_msg_filament_out_block);
//printer_state = AC_printer_filament_out;
PlayTune(BEEPER_PIN, FilamentOut, 1);
}
void ChironTFT::ConfirmationRequest(const char * const msg) {
// M108 continue
#if ACDEBUG(AC_MARLIN)
SERIAL_ECHOLNPAIR("ConfirmationRequest() ", msg, " printer_state:", printer_state);
#endif
switch (printer_state) {
case AC_printer_pausing: {
if ( (strcmp_P(msg, MARLIN_msg_print_paused) == 0 ) || (strcmp_P(msg, MARLIN_msg_nozzle_parked) == 0 ) ) {
SendtoTFTLN(AC_msg_paused); // enable continue button
printer_state = AC_printer_paused;
}
} break;
case AC_printer_resuming_from_power_outage:
case AC_printer_printing:
case AC_printer_paused: {
// Heater timout, send acknowledgement
if (strcmp_P(msg, MARLIN_msg_heater_timeout) == 0 ) {
pause_state = AC_paused_heater_timed_out;
SendtoTFTLN(AC_msg_paused); // enable continue button
PlayTune(BEEPER_PIN,Heater_Timedout,1);
}
// Reheat finished, send acknowledgement
else if (strcmp_P(msg, MARLIN_msg_reheat_done) == 0 ) {
pause_state = AC_paused_idle;
SendtoTFTLN(AC_msg_paused); // enable continue button
}
// Filament Purging, send acknowledgement enter run mode
else if (strcmp_P(msg, MARLIN_msg_filament_purging) == 0 ) {
pause_state = AC_paused_purging_filament;
SendtoTFTLN(AC_msg_paused); // enable continue button
}
} break;
default:
break;
}
}
void ChironTFT::StatusChange(const char * const msg) {
#if ACDEBUG(AC_MARLIN)
SERIAL_ECHOLNPAIR("StatusChange() ", msg);
SERIAL_ECHOLNPAIR("printer_state:", printer_state);
#endif
bool msg_matched = false;
// The only way to get printer status is to parse messages
// Use the state to minimise the work we do here.
switch (printer_state) {
case AC_printer_probing: {
// If probing completes ok save the mesh and park
if (strcmp_P(msg, MARLIN_msg_ready) == 0 ) {
injectCommands_P(PSTR("M500\nG27"));
SendtoTFTLN(AC_msg_probing_complete);
printer_state = AC_printer_idle;
msg_matched = true;
}
// If probing fails dont save the mesh raise the probe above the bad point
if (strcmp_P(msg, MARLIN_msg_probing_failed) == 0 ) {
PlayTune(BEEPER_PIN, BeepBeepBeeep, 1);
injectCommands_P(PSTR("G1 Z50 F500"));
SendtoTFTLN(AC_msg_probing_complete);
printer_state = AC_printer_idle;
msg_matched = true;
}
} break;
case AC_printer_printing: {
if (strcmp_P(msg, MARLIN_msg_reheating) == 0 ) {
SendtoTFTLN(AC_msg_paused); // enable continue button
msg_matched = true;
}
} break;
case AC_printer_pausing: {
if (strcmp_P(msg, MARLIN_msg_print_paused) == 0 ) {
SendtoTFTLN(AC_msg_paused);
printer_state = AC_printer_paused;
pause_state = AC_paused_idle;
msg_matched = true;
}
} break;
case AC_printer_stopping: {
if (strcmp_P(msg, MARLIN_msg_print_aborted) == 0 ) {
SendtoTFTLN(AC_msg_stop);
printer_state = AC_printer_idle;
msg_matched = true;
}
} break;
default:
break;
}
// If not matched earlier see if this was a heater message
if (!msg_matched) {
if (strcmp_P(msg, MARLIN_msg_extruder_heating) == 0) {
SendtoTFTLN(AC_msg_nozzle_heating);
hotend_state = AC_heater_temp_set;
}
else if (strcmp_P(msg, MARLIN_msg_bed_heating) == 0) {
SendtoTFTLN(AC_msg_bed_heating);
hotbed_state = AC_heater_temp_set;
}
}
}
void ChironTFT::PowerLossRecovery() {
printer_state = AC_printer_resuming_from_power_outage; // Play tune to notify user we can recover.
PlayTune(BEEPER_PIN, SOS, 1);
SERIAL_ECHOLNPGM("Resuming from power outage...");
SERIAL_ECHOLNPGM("Select SD file then press resume");
}
void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEN string to the panel
#if ACDEBUG(AC_SOME)
serialprintPGM(str);
#endif
while (const char c = pgm_read_byte(str++)) TFTSer.print(c);
}
void ChironTFT::SendtoTFTLN(PGM_P str = nullptr) {
if (str != nullptr) {
#if ACDEBUG(AC_SOME)
SERIAL_ECHO("> ");
#endif
SendtoTFT(str);
#if ACDEBUG(AC_SOME)
SERIAL_EOL();
#endif
}
TFTSer.println("");
}
bool ChironTFT::ReadTFTCommand() {
bool command_ready = false;
while( (TFTSer.available() > 0) && (command_len < MAX_CMND_LEN) ) {
panel_command[command_len] = TFTSer.read();
if(panel_command[command_len] == '\n') {
command_ready = true;
break;
}
command_len++;
}
if(command_ready) {
panel_command[command_len] = 0x00;
#if ACDEBUG(AC_ALL)
SERIAL_ECHOLNPAIR("< ", panel_command);
#endif
#if ACDEBUG(AC_SOME)
// Ignore status request commands
uint8_t req = atoi(&panel_command[1]);
if (req > 7 && req != 20) {
SERIAL_ECHOLNPAIR("> ", panel_command);
SERIAL_ECHOLNPAIR("printer_state:", printer_state);
}
#endif
}
return command_ready;
}
int8_t ChironTFT::Findcmndpos(const char * buff, char q) {
bool found = false;
int8_t pos = 0;
do {
if (buff[pos] == q) {
found = true;
break;
}
pos ++;
} while(pos < MAX_CMND_LEN);
if (found) return pos;
return -1;
}
void ChironTFT::CheckHeaters() {
uint8_t faultDuration = 0; float temp = 0;
// if the hotend temp is abnormal, confirm state before signalling panel
temp = getActualTemp_celsius(E0);
if ( (temp <= HEATER_0_MINTEMP) || (temp >= HEATER_0_MAXTEMP) ) {
do {
faultDuration ++;
if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) {
SendtoTFTLN(AC_msg_nozzle_temp_abnormal);
SERIAL_ECHOLNPAIR("Extruder temp abnormal! : ", temp);
break;
}
delay_ms(500);
temp = getActualTemp_celsius(E0);
} while ((temp <= HEATER_0_MINTEMP) || (temp >= HEATER_0_MAXTEMP) );
}
// if the hotbed temp is abnormal, confirm state before signalling panel
faultDuration = 0;
temp = getActualTemp_celsius(BED);
if ( (temp <= BED_MINTEMP) || (temp >= BED_MAXTEMP) ) {
do {
faultDuration ++;
if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) {
SendtoTFTLN(AC_msg_nozzle_temp_abnormal);
SERIAL_ECHOLNPAIR_P("Bed temp abnormal! : ", temp);
break;
}
delay_ms(500);
temp = getActualTemp_celsius(E0);
} while ((temp <= BED_MINTEMP) || (temp >= BED_MAXTEMP) );
}
// Update panel with hotend heater status
if (hotend_state != AC_heater_temp_reached) {
if ( WITHIN( getActualTemp_celsius(E0) - getTargetTemp_celsius(E0), -1, 1 ) ) {
SendtoTFTLN(AC_msg_nozzle_heating_done);
hotend_state = AC_heater_temp_reached;
}
}
// Update panel with bed heater status
if (hotbed_state != AC_heater_temp_reached) {
if ( WITHIN( getActualTemp_celsius(BED) - getTargetTemp_celsius(BED), -0.5, 0.5 ) ) {
SendtoTFTLN(AC_msg_bed_heating_done);
hotbed_state = AC_heater_temp_reached;
}
}
}
void ChironTFT::SendFileList(int8_t startindex) {
// respond to panel request for 4 files starting at index
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("## SendFileList ## ", startindex);
#endif
SendtoTFTLN(PSTR("FN "));
filenavigator.getFiles(startindex);
SendtoTFTLN(PSTR("END"));
}
void ChironTFT::SelectFile() {
strncpy(selectedfile,panel_command+4,command_len-4);
selectedfile[command_len-5] = '\0';
#if ACDEBUG(AC_FILE)
SERIAL_ECHOLNPAIR_F(" Selected File: ",selectedfile);
#endif
switch (selectedfile[0]) {
case '/': // Valid file selected
SendtoTFTLN(AC_msg_sd_file_open_success);
break;
case '<': // .. (go up folder level)
filenavigator.upDIR();
SendtoTFTLN(AC_msg_sd_file_open_failed);
SendFileList( 0 );
break;
default: // enter sub folder
filenavigator.changeDIR(selectedfile);
SendtoTFTLN(AC_msg_sd_file_open_failed);
SendFileList( 0 );
break;
}
}
void ChironTFT::InjectCommandandWait(PGM_P cmd) {
//injectCommands_P(cmnd); queue.enqueue_now_P(cmd);
//SERIAL_ECHOLN(PSTR("Inject>"));
}
void ChironTFT::ProcessPanelRequest() {
// Break these up into logical blocks // as its easier to navigate than one huge switch case!
int8_t req = atoi(&panel_command[1]);
// Information requests A0 - A8 and A33
if (req <= 8 || req == 33) PanelInfo(req);
// Simple Actions A9 - A28
else if ( req <= 28) PanelAction(req);
// Process Initiation
else if (req <= 34) PanelProcess(req);
else SendtoTFTLN();
}
void ChironTFT::PanelInfo(uint8_t req) {
// information requests A0-A8 and A33
switch (req) {
case 0: // A0 Get HOTEND Temp
SendtoTFT(PSTR("A0V "));
TFTSer.println(getActualTemp_celsius(E0));
break;
case 1: // A1 Get HOTEND Target Temp
SendtoTFT(PSTR("A1V "));
TFTSer.println(getTargetTemp_celsius(E0));
break;
case 2: // A2 Get BED Temp
SendtoTFT(PSTR("A2V "));
TFTSer.println(getActualTemp_celsius(BED));
break;
case 3: // A3 Get BED Target Temp
SendtoTFT(PSTR("A3V "));
TFTSer.println(getTargetTemp_celsius(BED));
break;
case 4: // A4 Get FAN Speed
SendtoTFT(PSTR("A4V "));
TFTSer.println(getActualFan_percent(FAN0));
break;
case 5: // A5 Get Current Coordinates
SendtoTFT(PSTR("A5V X: "));
TFTSer.print(getAxisPosition_mm(X));
SendtoTFT(PSTR(" Y: "));
TFTSer.print(getAxisPosition_mm(Y));
SendtoTFT(PSTR(" Z: "));
TFTSer.println(getAxisPosition_mm(Z));
break;
case 6: // A6 Get printing progress
if (isPrintingFromMedia()) {
SendtoTFT(PSTR("A6V "));
TFTSer.println(ui8tostr2(getProgress_percent()));
}
else
SendtoTFTLN(PSTR("A6V ---"));
break;
case 7: { // A7 Get Printing Time
uint32_t time = getProgress_seconds_elapsed() / 60;
SendtoTFT(PSTR("A7V "));
TFTSer.print(ui8tostr2(time / 60));
SendtoTFT(PSTR(" H "));
TFTSer.print(ui8tostr2(time % 60));
SendtoTFT(PSTR(" M"));
#if ACDEBUG(AC_ALL)
SERIAL_ECHOLNPAIR("Print time ", ui8tostr2(time / 60), ":", ui8tostr2(time % 60));
#endif
} break;
case 8: // A8 Get SD Card list A8 S0
if (!isMediaInserted()) safe_delay(500);
if (!isMediaInserted()) // Make sure the card is removed
SendtoTFTLN(AC_msg_no_sd_card);
else if (panel_command[3] == 'S')
SendFileList( atoi( &panel_command[4] ) );
break;
case 33: // A33 Get firmware info
SendtoTFT(PSTR("J33 "));
SendtoTFTLN(PSTR(SHORT_BUILD_VERSION));
break;
}
}
void ChironTFT::PanelAction(uint8_t req) {
switch (req) {
case 9: // A9 Pause SD print
if (isPrintingFromMedia()) {
SendtoTFTLN(AC_msg_pause);
pausePrint();
printer_state = AC_printer_pausing;
}
else
SendtoTFTLN(AC_msg_stop);
break;
case 10: // A10 Resume SD Print
if (pause_state == AC_paused_idle || printer_state == AC_printer_resuming_from_power_outage)
resumePrint();
else
setUserConfirmed();
break;
case 11: // A11 Stop SD print
if (isPrintingFromMedia()) {
printer_state = AC_printer_stopping;
stopPrint();
}
else {
if (printer_state == AC_printer_resuming_from_power_outage)
injectCommands_P(PSTR("M1000 C\n")); // Cancel recovery
SendtoTFTLN(AC_msg_stop);
printer_state = AC_printer_idle;
}
break;
case 12: // A12 Kill printer
kill(); // from marlincore.h
break;
case 13: // A13 Select file
SelectFile();
break;
case 14: { // A14 Start Printing
// Allows printer to restart the job if we dont want to recover
if (printer_state == AC_printer_resuming_from_power_outage) {
injectCommands_P(PSTR("M1000 C\n")); // Cancel recovery
printer_state = AC_printer_idle;
}
#if ACDebugLevel >= 1
SERIAL_ECHOLNPAIR_F("Print: ", selectedfile);
#endif
// the card library needs a path starting // but the File api doesn't...
char file[MAX_PATH_LEN];
file[0] = '/';
strcpy(file + 1, selectedfile);
printFile(file);
SendtoTFTLN(AC_msg_print_from_sd_card);
} break;
case 15: // A15 Resuming from outage
if (printer_state == AC_printer_resuming_from_power_outage)
// Need to home here to restore the Z position
injectCommands_P(AC_cmnd_power_loss_recovery);
injectCommands_P(PSTR("M1000\n")); // home and start recovery
break;
case 16: { // A16 Set HotEnd temp A17 S170
const float set_Htemp = atof(&panel_command[5]);
hotend_state = set_Htemp ? AC_heater_temp_set : AC_heater_off;
switch ((char)panel_command[4]) {
// Set Temp
case 'S': case 'C': setTargetTemp_celsius(set_Htemp, E0);
}
} break;
case 17: { // A17 Set bed temp
const float set_Btemp = atof(&panel_command[5]);
hotbed_state = set_Btemp ? AC_heater_temp_set : AC_heater_off;
if (panel_command[4] == 'S')
setTargetTemp_celsius(set_Btemp, BED);
} break;
case 18: // A18 Set Fan Speed
if (panel_command[4] == 'S')
setTargetFan_percent(atof(&panel_command[5]), FAN0);
break;
case 19: // A19 Motors off
if (!isPrinting()) {
disable_all_steppers(); // from marlincore.h
SendtoTFTLN(AC_msg_ready);
}
break;
case 20: // A20 Read/write print speed
if (panel_command[4] == 'S')
setFeedrate_percent(atoi(&panel_command[5]));
else {
SendtoTFT(PSTR("A20V "));
TFTSer.println(getFeedrate_percent());
}
break;
case 21: // A21 Home Axis A21 X
if (!isPrinting()) {
switch ((char)panel_command[4]) {
case 'X': injectCommands_P(PSTR("G28 X\n")); break;
case 'Y': injectCommands_P(PSTR("G28 Y\n")); break;
case 'Z': injectCommands_P(PSTR("G28 Z\n")); break;
case 'C': injectCommands_P(PSTR("G28\n")); break;
}
}
break;
case 22: // A22 Move Axis A22 Y +10F3000
// Ignore request if printing
if (!isPrinting()) {
// setAxisPosition_mm() uses pre defined manual feedrates so ignore the feedrate from the panel
setSoftEndstopState(true); // enable endstops
float newposition = atof(&panel_command[6]);
#if ACDEBUG(AC_ACTION)
SERIAL_ECHOLNPAIR("Nudge ", panel_command[4], " axis ", newposition);
#endif
switch (panel_command[4]) {
case 'X': setAxisPosition_mm(getAxisPosition_mm(X) + newposition, X); break;
case 'Y': setAxisPosition_mm(getAxisPosition_mm(Y) + newposition, Y); break;
case 'Z': setAxisPosition_mm(getAxisPosition_mm(Z) + newposition, Z); break;
case 'E': // The only time we get this command is from the filament load/unload menu
// the standard movement is too slow so we will use the load unlod GCode to speed it up a bit
if (canMove(E0) && !commandsInQueue())
injectCommands_P(newposition > 0 ? AC_cmnd_manual_load_filament : AC_cmnd_manual_unload_filament);
break;
}
}
break;
case 23: // A23 Preheat PLA
// Ignore request if printing
if (!isPrinting()) {
// Temps defined in configuration.h
setTargetTemp_celsius(PREHEAT_1_TEMP_BED, BED);
setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, E0);
SendtoTFTLN();
hotbed_state = AC_heater_temp_set;
hotend_state = AC_heater_temp_set;
}
break;
case 24: // A24 Preheat ABS
// Ignore request if printing
if (!isPrinting()) {
setTargetTemp_celsius(PREHEAT_2_TEMP_BED, BED);
setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, E0);
SendtoTFTLN();
hotbed_state = AC_heater_temp_set;
hotend_state = AC_heater_temp_set;
}
break;
case 25: // A25 Cool Down
// Ignore request if printing
if (!isPrinting()) {
setTargetTemp_celsius(0, E0);
setTargetTemp_celsius(0, BED);
SendtoTFTLN(AC_msg_ready);
hotbed_state = AC_heater_off;
hotend_state = AC_heater_off;
}
break;
case 26: // A26 Refresh SD
// M22 M21 maybe needed here to reset sd card
filenavigator.reset();
break;
case 27: // A27 Servo Angles adjust
break;
case 28: // A28 Filament set A28 O/C
// Ignore request if printing
if (isPrinting()) break;
SendtoTFTLN();
break;
}
}
void ChironTFT::PanelProcess(uint8_t req) {
switch (req) {
case 29: { // A29 Read Mesh Point A29 X1 Y1
xy_uint8_t pos;
float pos_z;
pos.x = atoi(&panel_command[5]);
pos.y = atoi(&panel_command[8]);
pos_z = getMeshPoint(pos);
SendtoTFT(PSTR("A29V "));
TFTSer.println(pos_z * 100);
if (!isPrinting()) {
setSoftEndstopState(true); // disable endstops
// If the same meshpoint is selected twice in a row, move the head to that ready for adjustment
if ((selectedmeshpoint.x == pos.x) && (selectedmeshpoint.y == pos.y)) {
if (!isPositionKnown())
injectCommands_P(PSTR("G28\n")); // home
if (isPositionKnown()) {
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Moving to mesh point at x: ", pos.x, " y: ", pos.y, " z: ", pos_z);
#endif
// Go up before moving
setAxisPosition_mm(3.0,Z);
setAxisPosition_mm(17 + (93 * pos.x), X);
setAxisPosition_mm(20 + (93 * pos.y), Y);
setAxisPosition_mm(0.0, Z);
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Current Z: ", getAxisPosition_mm(Z));
#endif
}
}
selectedmeshpoint.x = pos.x;
selectedmeshpoint.y = pos.y;
}
} break;
case 30: { // A30 Auto leveling
if (panel_command[3] == 'S') { // Start probing
// Ignore request if printing
if (isPrinting())
SendtoTFTLN(AC_msg_probing_not_allowed); // forbid auto leveling
else {
injectCommands_P(isMachineHomed() ? PSTR("G29") : PSTR("G28\nG29"));
printer_state = AC_printer_probing;
SendtoTFTLN(AC_msg_start_probing);
}
}
else SendtoTFTLN(AC_msg_start_probing);
} break;
case 31: { // A31 Adjust all Probe Points
switch (panel_command[3]) {
case 'C': // Restore and apply original offsets
if (!isPrinting()) {
injectCommands_P(PSTR("M501\nM420 S1\n"));
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
}
break;
case 'D': // Save Z Offset tables and restore levelling state
if (!isPrinting()) {
setAxisPosition_mm(1.0,Z);
injectCommands_P(PSTR("M500\n"));
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
}
break;
case 'G': // Get current offset
SendtoTFT(PSTR("A31V "));
// When printing use the live z Offset position
// we will use babystepping to move the print head
if (isPrinting())
TFTSer.println(live_Zoffset);
else {
TFTSer.println(getZOffset_mm());
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
}
break;
case 'S': { // Set offset (adjusts all points by value)
float Zshift = atof(&panel_command[4]);
setSoftEndstopState(false); // disable endstops
// Allow temporary Z position nudging during print
// From the levelling panel use the all points UI to adjust the print pos.
if (isPrinting()) {
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Change Zoffset from:", live_Zoffset, " to ", live_Zoffset + Zshift);
#endif
if (isAxisPositionKnown(Z)) {
#if ACDEBUG(AC_INFO)
const float currZpos = getAxisPosition_mm(Z);
SERIAL_ECHOLNPAIR("Nudge Z pos from ", currZpos, " to ", currZpos + constrain(Zshift, -0.05, 0.05));
#endif
// Use babystepping to adjust the head position
int16_t steps = mmToWholeSteps(constrain(Zshift,-0.05,0.05), Z);
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Steps to move Z: ", steps);
#endif
babystepAxis_steps(steps, Z);
live_Zoffset += Zshift;
}
SendtoTFT(PSTR("A31V "));
TFTSer.println(live_Zoffset);
}
else {
GRID_LOOP(x, y) {
const xy_uint8_t pos { x, y };
const float currval = getMeshPoint(pos);
setMeshPoint(pos, constrain(currval + Zshift, AC_LOWEST_MESHPOINT_VAL, 2));
}
const float currZOffset = getZOffset_mm();
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Change probe offset from ", currZOffset, " to ", currZOffset + Zshift);
#endif
setZOffset_mm(currZOffset + Zshift);
SendtoTFT(PSTR("A31V "));
TFTSer.println(getZOffset_mm());
if (isAxisPositionKnown(Z)) {
// Move Z axis
const float currZpos = getAxisPosition_mm(Z);
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Move Z pos from ", currZpos, " to ", currZpos + constrain(Zshift, -0.05, 0.05));
#endif
setAxisPosition_mm(currZpos+constrain(Zshift,-0.05,0.05),Z);
}
}
} break;
} // end switch
} break;
case 32: { // A32 clean leveling beep flag
// Ignore request if printing
//if (isPrinting()) break;
//injectCommands_P(PSTR("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000"));
//TFTSer.println("");
} break;
// A33 firmware info request seet PanelInfo()
case 34: { // A34 Adjust single mesh point A34 C/S X1 Y1 V123
if (panel_command[3] == 'C') { // Restore original offsets
injectCommands_P(PSTR("M501\nM420 S1"));
selectedmeshpoint.x = 99;
selectedmeshpoint.y = 99;
//printer_state = AC_printer_idle;
}
else {
xy_uint8_t pos;
pos.x = atoi(&panel_command[5]);
pos.y = atoi(&panel_command[8]);
float currmesh = getMeshPoint(pos);
float newval = atof(&panel_command[11])/100;
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Change mesh point x:", pos.x, " y:", pos.y);
SERIAL_ECHOLNPAIR("from ", currmesh, " to ", newval);
#endif
// Update Meshpoint
setMeshPoint(pos,newval);
if ( (printer_state == AC_printer_idle) || (printer_state == AC_printer_probing) ) {//!isPrinting()) {
// if we are at the current mesh point indicated on the panel Move Z pos +/- 0.05mm ( The panel changes the mesh value by +/- 0.05mm on each button press)
if ((selectedmeshpoint.x == pos.x) && (selectedmeshpoint.y == pos.y)) {
setSoftEndstopState(false);
float currZpos = getAxisPosition_mm(Z);
#if ACDEBUG(AC_INFO)
SERIAL_ECHOLNPAIR("Move Z pos from ", currZpos, " to ", currZpos + constrain(newval - currmesh, -0.05, 0.05));
#endif
setAxisPosition_mm(currZpos + constrain(newval - currmesh, -0.05, 0.05), Z);
}
}
}
} break;
}
}
} // namespace
#endif // ANYCUBIC_LCD_CHIRON

77
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h Normal file
View file

@ -0,0 +1,77 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* lcd/extui/lib/chiron_tft.h
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
#include "chiron_tft_defs.h"
#include "../../../../inc/MarlinConfigPre.h"
#include "../../ui_api.h"
namespace Anycubic {
class ChironTFT {
static printer_state_t printer_state;
static paused_state_t pause_state;
static heater_state_t hotend_state;
static heater_state_t hotbed_state;
static xy_uint8_t selectedmeshpoint;
static char panel_command[MAX_CMND_LEN];
static uint8_t command_len;
static char selectedfile[MAX_PATH_LEN];
static float live_Zoffset;
static file_menu_t file_menu;
public:
ChironTFT();
void Startup();
void IdleLoop();
void PrinterKilled(PGM_P,PGM_P);
void MediaEvent(media_event_t);
void TimerEvent(timer_event_t);
void FilamentRunout();
void ConfirmationRequest(const char * const );
void StatusChange(const char * const );
void PowerLossRecovery();
private:
void SendtoTFT(PGM_P);
void SendtoTFTLN(PGM_P);
bool ReadTFTCommand();
int8_t Findcmndpos(const char *, char);
void CheckHeaters();
void SendFileList(int8_t);
void SelectFile();
void InjectCommandandWait(PGM_P);
void ProcessPanelRequest();
void PanelInfo(uint8_t);
void PanelAction(uint8_t);
void PanelProcess(uint8_t);
};
extern ChironTFT Chiron;
}

151
Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h Normal file
View file

@ -0,0 +1,151 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
/**
* lcd/extui/lib/chiron_defs.h
*
* Extensible_UI implementation for Anycubic Chiron
* Written By Nick Wells, 2020 [https://github.com/SwiftNick]
* (not affiliated with Anycubic, Ltd.)
*/
#pragma once
#include "../../../../inc/MarlinConfigPre.h"
//#define ACDEBUGLEVEL 255
#if ACDEBUGLEVEL
// Bit-masks for selective debug:
enum ACDebugMask : uint8_t {
AC_INFO = 1,
AC_ACTION = 2,
AC_FILE = 4,
AC_PANEL = 8,
AC_MARLIN = 16,
AC_SOME = 32,
AC_ALL = 64
};
#define ACDEBUG(mask) ( ((mask) & ACDEBUGLEVEL) == mask ) // Debug flag macro
#else
#define ACDEBUG(mask) false
#endif
#define TFTSer LCD_SERIAL // Serial interface for TFT panel now uses marlinserial
#define MAX_FOLDER_DEPTH 4 // Limit folder depth TFT has a limit for the file path
#define MAX_CMND_LEN 16 * MAX_FOLDER_DEPTH // Maximum Length for a Panel command
#define MAX_PATH_LEN 16 * MAX_FOLDER_DEPTH // Maximum number of characters in a SD file path
#define AC_HEATER_FAULT_VALIDATION_TIME 5 // number of 1/2 second loops before signalling a heater fault
#define AC_LOWEST_MESHPOINT_VAL -7.00 // The lowest value you can set for a single mesh point offset
// TFT panel commands
#define AC_msg_sd_card_inserted PSTR("J00")
#define AC_msg_sd_card_removed PSTR("J01")
#define AC_msg_no_sd_card PSTR("J02")
#define AC_msg_usb_connected PSTR("J03")
#define AC_msg_print_from_sd_card PSTR("J04")
#define AC_msg_pause PSTR("J05")
#define AC_msg_nozzle_heating PSTR("J06")
#define AC_msg_nozzle_heating_done PSTR("J07")
#define AC_msg_bed_heating PSTR("J08")
#define AC_msg_bed_heating_done PSTR("J09")
#define AC_msg_nozzle_temp_abnormal PSTR("J10")
#define AC_msg_kill_lcd PSTR("J11")
#define AC_msg_ready PSTR("J12")
#define AC_msg_low_nozzle_temp PSTR("J13")
#define AC_msg_print_complete PSTR("J14")
#define AC_msg_filament_out_alert PSTR("J15")
#define AC_msg_stop PSTR("J16")
#define AC_msg_main_board_has_reset PSTR("J17")
#define AC_msg_paused PSTR("J18")
#define AC_msg_j19_unknown PSTR("J19")
#define AC_msg_sd_file_open_success PSTR("J20")
#define AC_msg_sd_file_open_failed PSTR("J21")
#define AC_msg_level_monitor_finished PSTR("J22")
#define AC_msg_filament_out_block PSTR("J23")
#define AC_msg_probing_not_allowed PSTR("J24")
#define AC_msg_probing_complete PSTR("J25")
#define AC_msg_start_probing PSTR("J26")
#define AC_msg_version PSTR("J27")
#define MARLIN_msg_start_probing PSTR("Probing Point 1/25")
#define MARLIN_msg_probing_failed PSTR("Probing Failed")
#define MARLIN_msg_ready PSTR("3D Printer Ready.")
#define MARLIN_msg_print_paused PSTR("Print Paused")
#define MARLIN_msg_print_aborted PSTR("Print Aborted")
#define MARLIN_msg_extruder_heating PSTR("E Heating...")
#define MARLIN_msg_bed_heating PSTR("Bed Heating...")
#define MARLIN_msg_nozzle_parked PSTR("Nozzle Parked")
#define MARLIN_msg_heater_timeout PSTR("Heater Timeout")
#define MARLIN_msg_reheating PSTR("Reheating...")
#define MARLIN_msg_reheat_done PSTR("Reheat finished.")
#define MARLIN_msg_filament_purging PSTR("Filament Purging...")
#define MARLIN_msg_special_pause PSTR("PB")
#define AC_cmnd_auto_unload_filament PSTR("M701") // Use Marlin unload routine
#define AC_cmnd_auto_load_filament PSTR("M702 M0 PB") // Use Marlin load routing then pause for user to clean nozzle
#define AC_cmnd_manual_load_filament PSTR("M83\nG1 E50 F700\nM82") // replace the manual panel commands with something a little faster
#define AC_cmnd_manual_unload_filament PSTR("M83\nG1 E-50 F1200\nM82")
#define AC_cmnd_enable_levelling PSTR("M420 S1 V1")
#define AC_cmnd_power_loss_recovery PSTR("G28 X Y R5\nG28 Z") // Lift, home X and Y then home Z when in 'safe' position
namespace Anycubic {
enum heater_state_t : uint8_t {
AC_heater_off,
AC_heater_temp_set,
AC_heater_temp_reached
};
enum paused_state_t : uint8_t {
AC_paused_heater_timed_out,
AC_paused_purging_filament,
AC_paused_idle
};
enum printer_state_t : uint8_t {
AC_printer_idle,
AC_printer_probing,
AC_printer_printing,
AC_printer_pausing,
AC_printer_paused,
AC_printer_stopping,
AC_printer_resuming_from_power_outage
};
enum timer_event_t : uint8_t {
AC_timer_started,
AC_timer_paused,
AC_timer_stopped
};
enum media_event_t : uint8_t {
AC_media_inserted,
AC_media_removed,
AC_media_error
};
enum file_menu_t : uint8_t {
AC_menu_file,
AC_menu_command,
AC_menu_change_to_file,
AC_menu_change_to_command
};
}

110
Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp
View file

@ -24,16 +24,17 @@
#if ENABLED(ANYCUBIC_LCD_I3MEGA)
#include "anycubic_i3mega_lcd.h"
#include "../../../../inc/MarlinConfig.h"
#include "../../ui_api.h"
#include "../../../../MarlinCore.h" // for quickstop_stepper and disable_steppers
#include "../../../../libs/numtostr.h"
#include "../../../../module/motion.h" // for A20 read printing speed feedrate_percentage
#include "../../../../MarlinCore.h" // for quickstop_stepper and disable_steppers
#include "../../../../inc/MarlinConfig.h"
// command sending macro's with debugging capability
#define SEND_PGM(x) send_P(PSTR(x))
#define SENDLINE_PGM(x) sendLine_P(PSTR(x))
#define SEND_PGM_VAL(x,y) (send_P(PSTR(x)), sendLine(itostr3(y)))
#define SEND_PGM_VAL(x,y) (send_P(PSTR(x)), sendLine(i8tostr3rj(y)))
#define SEND(x) send(x)
#define SENDLINE(x) sendLine(x)
#if ENABLED(ANYCUBIC_LCD_DEBUG)
@ -44,20 +45,8 @@
#define SENDLINE_DBG_PGM_VAL(x,y,z) sendLine_P(PSTR(x))
#endif
AnycubicTFTClass AnycubicTFT;
char _conv[8];
char *itostr2(const uint8_t &x) {
// sprintf(conv,"%5.1f",x);
int xx = x;
_conv[0] = (xx / 10) % 10 + '0';
_conv[1] = (xx) % 10 + '0';
_conv[2] = 0;
return _conv;
}
static void sendNewLine(void) {
LCD_SERIAL.write('\r');
LCD_SERIAL.write('\n');
@ -82,34 +71,6 @@ static void sendLine_P(PGM_P str) {
sendNewLine();
}
#ifndef ULTRA_LCD
#define DIGIT(n) ('0' + (n))
#define DIGIMOD(n, f) DIGIT((n) / (f) % 10)
#define RJDIGIT(n, f) ((n) >= (f) ? DIGIMOD(n, f) : ' ')
#define MINUSOR(n, alt) (n >= 0 ? (alt) : (n = -n, '-'))
char* itostr3(const int x) {
int xx = x;
_conv[4] = MINUSOR(xx, RJDIGIT(xx, 100));
_conv[5] = RJDIGIT(xx, 10);
_conv[6] = DIGIMOD(xx, 1);
return &_conv[4];
}
// Convert signed float to fixed-length string with 023.45 / -23.45 format
char *ftostr32(const float &x) {
long xx = x * 100;
_conv[1] = MINUSOR(xx, DIGIMOD(xx, 10000));
_conv[2] = DIGIMOD(xx, 1000);
_conv[3] = DIGIMOD(xx, 100);
_conv[4] = '.';
_conv[5] = DIGIMOD(xx, 10);
_conv[6] = DIGIMOD(xx, 1);
return &_conv[1];
}
#endif
AnycubicTFTClass::AnycubicTFTClass() {}
void AnycubicTFTClass::OnSetup() {
@ -181,7 +142,7 @@ void AnycubicTFTClass::OnKillTFT() {
void AnycubicTFTClass::OnSDCardStateChange(bool isInserted) {
#if ENABLED(ANYCUBIC_LCD_DEBUG)
SERIAL_ECHOPGM("TFT Serial Debug: OnSDCardStateChange event triggered...");
SERIAL_ECHO(itostr2(isInserted));
SERIAL_ECHO(ui8tostr2(isInserted));
SERIAL_EOL();
#endif
DoSDCardStateCheck();
@ -622,19 +583,15 @@ void AnycubicTFTClass::GetCommandFromTFT() {
case 3: { // A3 GET HOTBED TARGET TEMP
float heatedBedTargetTemp = ExtUI::getTargetTemp_celsius((ExtUI::heater_t) ExtUI::BED);
SEND_PGM_VAL("A3V ", int(heatedBedTargetTemp + 0.5));
}
break;
} break;
case 4: // A4 GET FAN SPEED
{
case 4: { // A4 GET FAN SPEED
float fanPercent = ExtUI::getActualFan_percent(ExtUI::FAN0);
fanPercent = constrain(fanPercent, 0, 100);
SEND_PGM_VAL("A4V ", int(fanPercent));
}
break;
} break;
case 5: // A5 GET CURRENT COORDINATE
{
case 5: { // A5 GET CURRENT COORDINATE
float xPostition = ExtUI::getAxisPosition_mm(ExtUI::X);
float yPostition = ExtUI::getAxisPosition_mm(ExtUI::Y);
float zPostition = ExtUI::getAxisPosition_mm(ExtUI::Z);
@ -645,39 +602,34 @@ void AnycubicTFTClass::GetCommandFromTFT() {
SEND_PGM(" Z: ");
LCD_SERIAL.print(zPostition);
SENDLINE_PGM("");
}
break;
} break;
case 6: // A6 GET SD CARD PRINTING STATUS
#if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMedia()) {
SEND_PGM("A6V ");
if (ExtUI::isMediaInserted()) {
SENDLINE(itostr3(int(ExtUI::getProgress_percent())));
}
else {
if (ExtUI::isMediaInserted())
SENDLINE(ui8tostr3rj(ExtUI::getProgress_percent()));
else
SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to return printing status... J02");
}
}
else {
else
SENDLINE_PGM("A6V ---");
}
#endif
break;
case 7: { // A7 GET PRINTING TIME
uint32_t elapsedSeconds = ExtUI::getProgress_seconds_elapsed();
const uint32_t elapsedSeconds = ExtUI::getProgress_seconds_elapsed();
SEND_PGM("A7V ");
if (elapsedSeconds != 0) { // print time
uint32_t elapsedMinutes = elapsedSeconds / 60;
SEND(itostr2(elapsedMinutes / 60));
const uint32_t elapsedMinutes = elapsedSeconds / 60;
SEND(ui8tostr2(elapsedMinutes / 60));
SEND_PGM(" H ");
SEND(itostr2(elapsedMinutes % 60));
SEND(ui8tostr2(elapsedMinutes % 60));
SENDLINE_PGM(" M");
}
else {
else
SENDLINE_PGM(" 999:999");
}
}
break;
@ -692,7 +644,6 @@ void AnycubicTFTClass::GetCommandFromTFT() {
#if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMedia())
PausePrint();
#endif
break;
@ -700,14 +651,11 @@ void AnycubicTFTClass::GetCommandFromTFT() {
#if ENABLED(SDSUPPORT)
if (ExtUI::isPrintingFromMediaPaused())
ResumePrint();
#endif
break;
case 11: // A11 STOP SD PRINT
#if ENABLED(SDSUPPORT)
StopPrint();
#endif
TERN_(SDSUPPORT, StopPrint());
break;
case 12: // A12 kill
@ -748,7 +696,6 @@ void AnycubicTFTClass::GetCommandFromTFT() {
#if ENABLED(SDSUPPORT)
if (!ExtUI::isPrinting() && strlen(SelectedFile) > 0)
StartPrint();
#endif
break;
@ -771,8 +718,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
}
break;
case 17:// A17 set heated bed temp
{
case 17: { // A17 set heated bed temp
unsigned int tempbed;
if (CodeSeen('S')) {
tempbed = constrain(CodeValue(), 0, 100);
@ -781,19 +727,17 @@ void AnycubicTFTClass::GetCommandFromTFT() {
}
break;
case 18:// A18 set fan speed
{
case 18: { // A18 set fan speed
float fanPercent;
if (CodeSeen('S')) {
fanPercent = CodeValue();
fanPercent = constrain(fanPercent, 0, 100);
ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0);
}
else {
else
fanPercent = 100;
}
ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0);
ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0);
SENDLINE_PGM("");
}
break;
@ -807,13 +751,11 @@ void AnycubicTFTClass::GetCommandFromTFT() {
SENDLINE_PGM("");
break;
case 20: { // A20 read printing speed
case 20: // A20 read printing speed
if (CodeSeen('S'))
feedrate_percentage = constrain(CodeValue(), 40, 999);
else
SEND_PGM_VAL("A20V ", feedrate_percentage);
}
break;
case 21: // A21 all home

6
Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h
View file

@ -23,12 +23,6 @@
#include "../../../../inc/MarlinConfigPre.h"
#include "../../../../sd/SdFatConfig.h" // for the FILENAME_LENGTH macro
char *itostr2(const uint8_t &x);
#ifndef ULTRA_LCD
char *itostr3(const int);
char *ftostr32(const float &);
#endif
#define TFTBUFSIZE 4
#define TFT_MAX_CMD_SIZE 96

7
Marlin/src/libs/numtostr.cpp
View file

@ -52,6 +52,13 @@ const char* ui8tostr3rj(const uint8_t i) {
return &conv[4];
}
// Convert uint8_t to string with 12 format
const char* ui8tostr2(const uint8_t i) {
conv[5] = DIGIMOD(i, 10);
conv[6] = DIGIMOD(i, 1);
return &conv[5];
}
// Convert signed 8bit int to rj string with 123 or -12 format
const char* i8tostr3rj(const int8_t x) {
int xx = x;

3
Marlin/src/libs/numtostr.h
View file

@ -26,6 +26,9 @@
// Convert a full-range unsigned 8bit int to a percentage
const char* ui8tostr4pctrj(const uint8_t i);
// Convert uint8_t to string with 12 format
const char* ui8tostr2(const uint8_t x);
// Convert uint8_t to string with 123 format
const char* ui8tostr3rj(const uint8_t i);