Updated example configuration files

Marlin/example_configurations/Felix/Configuration.h

@@ -739,6 +739,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/Hephestos/Configuration.h

@@ -748,6 +748,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/Hephestos_2/Configuration.h

@@ -750,6 +750,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP    110
 #define ABS_PREHEAT_FAN_SPEED   0   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/K8200/Configuration.h

@@ -773,6 +773,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 60 // K8200: set back to 110 if you have an upgraded heatbed power supply
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -756,6 +756,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/RigidBot/Configuration.h

@@ -1,4 +1,4 @@
-/**
+f/**
  * Marlin 3D Printer Firmware
  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
@@ -751,6 +751,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/SCARA/Configuration.h

@@ -764,6 +764,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/TAZ4/Configuration.h

@@ -777,6 +777,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/WITBOX/Configuration.h

@@ -748,6 +748,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -756,6 +756,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 110
 #define ABS_PREHEAT_FAN_SPEED 0   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/delta/biv2.5/Configuration.h

@@ -885,6 +885,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/delta/generic/Configuration.h

@@ -885,6 +885,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -889,6 +889,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -882,6 +882,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -890,6 +890,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/makibox/Configuration.h

@@ -759,6 +759,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = false; // set to true to invert the l
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -750,6 +750,19 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define ABS_PREHEAT_HPB_TEMP 100
 #define ABS_PREHEAT_FAN_SPEED 255   // Insert Value between 0 and 255
 
+
+//
+// Print Counter
+//
+// When enabled Marlin will keep track of some print statistical data such as:
+//  - Total print jobs
+//  - Total successfull print jobs
+//  - Total failed print jobs
+//  - Total time printing
+//
+// This information can be viewed by the M78 command.
+//#define PRINTCOUNTER
+
 //=============================================================================
 //============================= LCD and SD support ============================
 //=============================================================================