diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2744d43b15..2858b33290 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 2a55fb9310..188cb32cf0 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/Marlin/src/HAL/HAL_DUE/fastio_Due.h b/Marlin/src/HAL/HAL_DUE/fastio_Due.h
index 2bcd604ae5..a97a944e33 100644
--- a/Marlin/src/HAL/HAL_DUE/fastio_Due.h
+++ b/Marlin/src/HAL/HAL_DUE/fastio_Due.h
@@ -70,7 +70,7 @@
const uint32_t mask = MASK(DIO ## IO ## _PIN); \
if (V) port->PIO_SODR = mask; \
else port->PIO_CODR = mask; \
-} while(0)
+}while(0)
// Toggle a pin
#define _TOGGLE(IO) _WRITE(IO, !READ(IO))
diff --git a/Marlin/src/HAL/HAL_DUE/usb/compiler.h b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
index d9ecd3f0fe..cecdd256f0 100644
--- a/Marlin/src/HAL/HAL_DUE/usb/compiler.h
+++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
@@ -112,7 +112,7 @@
* \def unused
* \brief Marking \a v as a unused parameter or value.
*/
-#define unused(v) do { (void)(v); } while(0)
+#define unused(v) do { (void)(v); }while(0)
/**
* \def barrier
@@ -169,7 +169,7 @@
* heuristics and inline the function no matter how big it thinks it
* becomes.
*/
-#if defined(__CC_ARM)
+#ifdef __CC_ARM
# define __always_inline __forceinline
#elif (defined __GNUC__)
#ifdef __always_inline
@@ -187,7 +187,7 @@
* This annotation instructs the compiler to ignore its inlining
* heuristics and not inline the function.
*/
-#if defined(__CC_ARM)
+#ifdef __CC_ARM
# define __no_inline __attribute__((noinline))
#elif (defined __GNUC__)
# define __no_inline __attribute__((__noinline__))
@@ -204,7 +204,7 @@
*
* \param expr Expression to evaluate and supposed to be nonzero.
*/
-#if defined(_ASSERT_ENABLE_)
+#ifdef _ASSERT_ENABLE_
# if defined(TEST_SUITE_DEFINE_ASSERT_MACRO)
// Assert() is defined in unit_test/suite.h
# include "unit_test/suite.h"
@@ -998,14 +998,14 @@ typedef U8 Byte; //!< 8-bit unsigned integer.
#endif // #ifndef __ASSEMBLY__
-#if defined(__ICCARM__)
+#ifdef __ICCARM__
#define SHORTENUM __packed
#elif defined(__GNUC__)
#define SHORTENUM __attribute__((packed))
#endif
/* No operation */
-#if defined(__ICCARM__)
+#ifdef __ICCARM__
#define nop() __no_operation()
#elif defined(__GNUC__)
#define nop() (__NOP())
diff --git a/Marlin/src/HAL/HAL_LINUX/include/serial.h b/Marlin/src/HAL/HAL_LINUX/include/serial.h
index e212276404..a844936c1b 100644
--- a/Marlin/src/HAL/HAL_LINUX/include/serial.h
+++ b/Marlin/src/HAL/HAL_LINUX/include/serial.h
@@ -142,10 +142,10 @@ public:
void print_bin(uint32_t value, uint8_t num_digits) {
uint32_t mask = 1 << (num_digits -1);
for (uint8_t i = 0; i < num_digits; i++) {
- if (!(i % 4) && i) write(' ');
- if (!(i % 16) && i) write(' ');
- if (value & mask) write('1');
- else write('0');
+ if (!(i % 4) && i) write(' ');
+ if (!(i % 16) && i) write(' ');
+ if (value & mask) write('1');
+ else write('0');
value <<= 1;
}
}
diff --git a/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp b/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp
index 16ba8369e9..c4fd2d57bc 100644
--- a/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp
+++ b/Marlin/src/HAL/HAL_SAMD51/Servo_SAMD51.cpp
@@ -115,12 +115,12 @@ HAL_SERVO_TIMER_ISR() {
tc->COUNT16.CC[tcChannel].reg = (uint16_t)(tcCounterValue - 4UL); // at least REFRESH_INTERVAL has elapsed
}
if (tcChannel == 0) {
- SYNC(tc->COUNT16.SYNCBUSY.bit.CC0);
+ SYNC(tc->COUNT16.SYNCBUSY.bit.CC0);
// Clear the interrupt
tc->COUNT16.INTFLAG.reg = TC_INTFLAG_MC0;
}
else {
- SYNC(tc->COUNT16.SYNCBUSY.bit.CC1);
+ SYNC(tc->COUNT16.SYNCBUSY.bit.CC1);
// Clear the interrupt
tc->COUNT16.INTFLAG.reg = TC_INTFLAG_MC1;
}
diff --git a/Marlin/src/HAL/HAL_STM32/fastio_STM32.h b/Marlin/src/HAL/HAL_STM32/fastio_STM32.h
index 29ddf5faa3..917ee3a1a6 100644
--- a/Marlin/src/HAL/HAL_STM32/fastio_STM32.h
+++ b/Marlin/src/HAL/HAL_STM32/fastio_STM32.h
@@ -53,7 +53,7 @@ void FastIO_init(); // Must be called before using fast io macros
#define _WRITE(IO, V) do { \
if (V) FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO])) ; \
else FastIOPortMap[STM_PORT(digitalPin[IO])]->BRR = _BV32(STM_PIN(digitalPin[IO])) ; \
- } while(0)
+ }while(0)
#else
#define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO]) + (V ? 0 : 16)))
#endif
diff --git a/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h b/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h
index 6cc7a72d95..463d951c1e 100644
--- a/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h
+++ b/Marlin/src/HAL/HAL_STM32F1/fastio_STM32F1.h
@@ -38,8 +38,8 @@
#define _SET_OUTPUT(IO) _SET_MODE(IO, GPIO_OUTPUT_PP)
#define _SET_OUTPUT_OD(IO) _SET_MODE(IO, GPIO_OUTPUT_OD)
-#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); } while(0)
-#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); } while(0)
+#define OUT_WRITE(IO,V) do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE_OD(IO,V) do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
#define SET_INPUT(IO) _SET_MODE(IO, GPIO_INPUT_FLOATING)
#define SET_INPUT_PULLUP(IO) _SET_MODE(IO, GPIO_INPUT_PU)
diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h
index a6e546a4a8..eb2b41d65b 100644
--- a/Marlin/src/core/macros.h
+++ b/Marlin/src/core/macros.h
@@ -118,24 +118,24 @@
// Using GCC extensions, but Travis GCC version does not like it and gives
// "error: statement-expressions are not allowed outside functions nor in template-argument lists"
#define NOLESS(v, n) \
- do { \
+ do{ \
__typeof__(n) _n = (n); \
if (v < _n) v = _n; \
- } while(0)
+ }while(0)
#define NOMORE(v, n) \
- do { \
+ do{ \
__typeof__(n) _n = (n); \
if (v > _n) v = _n; \
- } while(0)
+ }while(0)
#define LIMIT(v, n1, n2) \
- do { \
+ do{ \
__typeof__(n1) _n1 = (n1); \
__typeof__(n2) _n2 = (n2); \
if (v < _n1) v = _n1; \
else if (v > _n2) v = _n2; \
- } while(0)
+ }while(0)
#endif
diff --git a/Marlin/src/core/serial.h b/Marlin/src/core/serial.h
index bae554bccb..463b9b6f53 100644
--- a/Marlin/src/core/serial.h
+++ b/Marlin/src/core/serial.h
@@ -184,5 +184,5 @@ void print_bin(const uint16_t val);
void print_xyz(PGM_P const prefix, PGM_P const suffix, const float x, const float y, const float z);
void print_xyz(PGM_P const prefix, PGM_P const suffix, const float xyz[]);
-#define SERIAL_POS(SUFFIX,VAR) do { print_xyz(PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); } while(0)
-#define SERIAL_XYZ(PREFIX,V...) do { print_xyz(PSTR(PREFIX), nullptr, V); } while(0)
+#define SERIAL_POS(SUFFIX,VAR) do { print_xyz(PSTR(" " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n"), VAR); }while(0)
+#define SERIAL_XYZ(PREFIX,V...) do { print_xyz(PSTR(PREFIX), nullptr, V); }while(0)
diff --git a/Marlin/src/feature/leds/leds.cpp b/Marlin/src/feature/leds/leds.cpp
index e5e952ed6c..210aeef092 100644
--- a/Marlin/src/feature/leds/leds.cpp
+++ b/Marlin/src/feature/leds/leds.cpp
@@ -125,7 +125,7 @@ void LEDLights::set_color(const LEDColor &incol
// If the pins can do PWM then their intensity will be set.
#define UPDATE_RGBW(C,c) do { if (PWM_PIN(RGB_LED_##C##_PIN)) \
analogWrite(pin_t(RGB_LED_##C##_PIN), incol.c); \
- else WRITE(RGB_LED_##C##_PIN, incol.c ? HIGH : LOW); } while(0)
+ else WRITE(RGB_LED_##C##_PIN, incol.c ? HIGH : LOW); }while(0)
UPDATE_RGBW(R,r);
UPDATE_RGBW(G,g);
UPDATE_RGBW(B,b);
diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp
index 397f5d2f75..5eaadeb77d 100644
--- a/Marlin/src/gcode/calibrate/G33.cpp
+++ b/Marlin/src/gcode/calibrate/G33.cpp
@@ -445,7 +445,7 @@ void GcodeSuite::G33() {
_tower_results = (_4p_calibration && towers_set) || probe_points >= 3,
_opposite_results = (_4p_calibration && !towers_set) || probe_points >= 3,
_endstop_results = probe_points != 1 && probe_points != -1 && probe_points != 0,
- _angle_results = probe_points >= 3 && towers_set;
+ _angle_results = probe_points >= 3 && towers_set;
static const char save_message[] PROGMEM = "Save with M500 and/or copy to Configuration.h";
int8_t iterations = 0;
float test_precision,
diff --git a/Marlin/src/gcode/calibrate/G34_M422.cpp b/Marlin/src/gcode/calibrate/G34_M422.cpp
index 101b3cc008..4b38eff325 100644
--- a/Marlin/src/gcode/calibrate/G34_M422.cpp
+++ b/Marlin/src/gcode/calibrate/G34_M422.cpp
@@ -284,7 +284,7 @@ void GcodeSuite::G34() {
// Home Z after the alignment procedure
process_subcommands_now_P(PSTR("G28 Z"));
- } while(0);
+ }while(0);
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< G34");
}
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index b9d1123211..411e2fe834 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -368,7 +368,7 @@
#endif
// Extensible UI serial touch screens. (See src/lcd/extensible_ui)
-#if EITHER(MALYAN_LCD, DGUS_LCD)
+#if ANY(MALYAN_LCD, DGUS_LCD, LULZBOT_TOUCH_UI)
#define IS_EXTUI
#define EXTENSIBLE_UI
#endif
diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h
index 168bc9cc17..bb9ca6be30 100644
--- a/Marlin/src/inc/Conditionals_adv.h
+++ b/Marlin/src/inc/Conditionals_adv.h
@@ -99,3 +99,6 @@
#define LED_USER_PRESET_BRIGHTNESS 255
#endif
#endif
+
+// Extensible UI pin mapping for RepRapDiscount
+#define TOUCH_UI_ULTIPANEL ENABLED(LULZBOT_TOUCH_UI) && ANY(AO_EXP1_PINMAP, AO_EXP2_PINMAP, CR10_TFT_PINMAP)
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index e6bd1beb1d..c1c75f0422 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1892,6 +1892,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
+ ENABLED(OVERLORD_OLED) \
+ ENABLED(DGUS_LCD) \
+ ENABLED(MALYAN_LCD) \
+ + ENABLED(LULZBOT_TOUCH_UI) \
+ ENABLED(FSMC_GRAPHICAL_TFT)
#error "Please select no more than one LCD controller option."
#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.cpp
new file mode 100644
index 0000000000..2e17c6492c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.cpp
@@ -0,0 +1,560 @@
+/*********************
+ * flash_storage.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../compat.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "../ftdi_eve_lib/ftdi_eve_lib.h"
+
+#include "media_file_reader.h"
+#include "flash_storage.h"
+
+// The following must be changed whenever the layout of the flash
+// data is changed in a manner that would render the data invalid.
+
+constexpr uint32_t flash_eeprom_version = 1;
+
+/* SPI Flash Memory Map:
+ *
+ * The following offsets and sizes are specified in 4k erase units:
+ *
+ * Page Size Description
+ * 0 16 DATA STORAGE AREA
+ * 16 1 VERSIONING DATA
+ * 17 inf MEDIA STORAGE AREA
+ *
+ */
+
+#define DATA_STORAGE_SIZE_64K
+
+using namespace FTDI::SPI;
+using namespace FTDI::SPI::most_significant_byte_first;
+
+bool UIFlashStorage::is_present = false;
+
+#ifdef SPI_FLASH_SS
+/************************** SPI Flash Chip Interface **************************/
+
+ void SPIFlash::wait_while_busy() {
+ uint8_t status;
+ safe_delay(1);
+ do {
+ spi_flash_select();
+ spi_write_8(READ_STATUS_1);
+ status = spi_read_8();
+ spi_flash_deselect();
+ safe_delay(1);
+ } while (status & 1);
+ }
+
+ void SPIFlash::erase_sector_4k(uint32_t addr) {
+ spi_flash_select();
+ spi_write_8(WRITE_ENABLE);
+ spi_flash_deselect();
+
+ spi_flash_select();
+ spi_write_8(ERASE_4K);
+ spi_write_24(addr);
+ spi_flash_deselect();
+
+ wait_while_busy();
+ }
+
+ void SPIFlash::erase_sector_64k(uint32_t addr) {
+ spi_flash_select();
+ spi_write_8(WRITE_ENABLE);
+ spi_flash_deselect();
+
+ spi_flash_select();
+ spi_write_8(ERASE_64K);
+ spi_write_24(addr);
+ spi_flash_deselect();
+
+ wait_while_busy();
+ }
+
+ void SPIFlash::spi_write_begin(uint32_t addr) {
+ spi_flash_select();
+ spi_write_8(WRITE_ENABLE);
+ spi_flash_deselect();
+
+ spi_flash_select();
+ spi_write_8(PAGE_PROGRAM);
+ spi_write_24(addr);
+ }
+
+ void SPIFlash::spi_write_end() {
+ spi_flash_deselect();
+ wait_while_busy();
+ }
+
+ void SPIFlash::spi_read_begin(uint32_t addr) {
+ spi_flash_select();
+ spi_write_8(READ_DATA);
+ spi_write_24(addr);
+ }
+
+ void SPIFlash::spi_read_end() {
+ spi_flash_deselect();
+ }
+
+ void SPIFlash::erase_chip() {
+ spi_flash_select();
+ spi_write_8(WRITE_ENABLE);
+ spi_flash_deselect();
+
+ spi_flash_select();
+ spi_write_8(ERASE_CHIP);
+ spi_flash_deselect();
+ wait_while_busy();
+ }
+
+ void SPIFlash::read_jedec_id(uint8_t &manufacturer_id, uint8_t &device_type, uint8_t &capacity) {
+ spi_flash_select();
+ spi_write_8(READ_JEDEC_ID);
+ manufacturer_id = spi_recv();
+ device_type = spi_recv();
+ capacity = spi_recv();
+ spi_flash_deselect ();
+ }
+
+ /* This function writes "size" bytes from "data" starting at addr, while properly
+ * taking into account the special case of writing across a 256 byte page boundary.
+ * Returns the addr directly after the write.
+ */
+ uint32_t SPIFlash::write(uint32_t addr, const void *_data, size_t size) {
+ const uint8_t *data = (const uint8_t*) _data;
+ while (size) {
+ const uint32_t page_start = addr & 0xFFFF00ul;
+ const uint32_t page_end = page_start + 256;
+ const uint32_t write_size = min(page_end - addr, size);
+ spi_write_begin(addr);
+ spi_write_bulk(data, write_size);
+ spi_write_end();
+ addr += write_size;
+ size -= write_size;
+ data += write_size;
+ }
+ return addr;
+ }
+
+ uint32_t SPIFlash::read(uint32_t addr, void *data, size_t size) {
+ spi_read_begin(addr);
+ spi_read_bulk(data, size);
+ spi_read_end();
+ return addr + size;
+ }
+
+ /********************************** UTILITY ROUTINES *********************************/
+
+ bool UIFlashStorage::check_known_device() {
+ uint8_t manufacturer_id, device_type, capacity;
+ read_jedec_id(manufacturer_id, device_type, capacity);
+
+ const bool is_known =
+ ((manufacturer_id == 0xEF) && (device_type == 0x40) && (capacity == 0x15)) || // unknown
+ ((manufacturer_id == 0x01) && (device_type == 0x40) && (capacity == 0x15)) || // Cypress S25FL116K
+ ((manufacturer_id == 0xEF) && (device_type == 0x14) && (capacity == 0x15)) || // Winbond W25Q16JV
+ ((manufacturer_id == 0x1F) && (device_type == 0x86) && (capacity == 0x01)) ; // Adesto AT255F161
+
+ if (!is_known) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Unable to locate supported SPI Flash Memory.");
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" Manufacturer ID, got: ", manufacturer_id);
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" Device Type , got: ", device_type);
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(" Capacity , got: ", capacity);
+ }
+
+ return is_known;
+ }
+
+ void UIFlashStorage::initialize() {
+ for(uint8_t i = 0; i < 10; i++) {
+ if (check_known_device()) {
+ is_present = true;
+ break;
+ }
+ safe_delay(1000);
+ }
+ }
+
+ /**************************** DATA STORAGE AREA (first 4K or 64k) ********************/
+
+ #ifdef DATA_STORAGE_SIZE_64K
+ constexpr uint32_t data_storage_area_size = 64 * 1024; // Large erase unit
+ #else
+ constexpr uint32_t data_storage_area_size = 4 * 1024; // Small erase unit
+ #endif
+
+ /* In order to provide some degree of wear leveling, each data write to the
+ * SPI Flash chip is appended to data that was already written before, until
+ * the data storage area is completely filled. New data is written preceeded
+ * with a 32-bit delimiter 'LULZ', so that we can distinguish written and
+ * unwritten data:
+ *
+ * 'LULZ' <--- 1st record delimiter
+ *
+ *
+ *
+ * 'LULZ' <--- 2nd record delimiter
+ *
+ *
+ *
+ * ...
+ * 'LULZ' <--- Last record delimiter
+ *
+ *
+ *
+ * 0xFF <--- Start of free space
+ * 0xFF
+ * ...
+ *
+ * This function walks down the data storage area, verifying that the
+ * delimiters are either 'LULZ' or 0xFFFFFFFF. In the case that an invalid
+ * delimiter is found, this function returns -1, indicating that the Flash
+ * data is invalid (this will happen if the block_size changed with respect
+ * to earlier firmware). Otherwise, it returns the offset of the last
+ * valid delimiter 'LULZ', indicating the most recently written data.
+ */
+ int32_t UIFlashStorage::get_config_read_offset(uint32_t block_size) {
+ uint16_t stride = 4 + block_size;
+ int32_t read_offset = -1;
+
+ for(uint32_t offset = 0; offset < (data_storage_area_size - stride); offset += stride) {
+ uint32_t delim;
+ spi_read_begin(offset);
+ spi_read_bulk (&delim, sizeof(delim));
+ spi_read_end();
+ switch (delim) {
+ case 0xFFFFFFFFul: return read_offset;
+ case delimiter: read_offset = offset; break;
+ default:
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR("Invalid delimiter in Flash: ", delim);
+ return -1;
+ }
+ }
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("No LULZ delimiter found.");
+ return -1;
+ }
+
+ /* This function returns the offset at which new data should be
+ * appended, or -1 if the Flash needs to be erased */
+ int32_t UIFlashStorage::get_config_write_offset(uint32_t block_size) {
+ int32_t read_offset = get_config_read_offset(block_size);
+ if (read_offset == -1) return -1; // The SPI flash is invalid
+
+ int32_t write_offset = read_offset + 4 + block_size;
+ if ((write_offset + 4 + block_size) > data_storage_area_size) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Not enough free space in Flash.");
+ return -1; // Not enough free space
+ }
+ return write_offset;
+ }
+
+ bool UIFlashStorage::verify_config_data(const void *data, size_t size) {
+ if (!is_present) return false;
+
+ int32_t read_addr = get_config_read_offset(size);
+ if (read_addr == -1) return false;
+
+ uint32_t delim;
+ spi_read_begin(read_addr);
+ spi_read_bulk (&delim, sizeof(delim));
+ bool ok = spi_verify_bulk(data,size);
+ spi_read_end();
+ return ok && delim == delimiter;
+ }
+
+ bool UIFlashStorage::read_config_data(void *data, size_t size) {
+ if (!is_present) return false;
+
+ int32_t read_addr = get_config_read_offset(size);
+ if (read_addr == -1) return false;
+
+ uint32_t delim;
+ spi_read_begin(read_addr);
+ spi_read_bulk (&delim, sizeof(delim));
+ spi_read_bulk (data, size);
+ spi_read_end();
+ return delim == delimiter;
+ }
+
+ void UIFlashStorage::write_config_data(const void *data, size_t size) {
+ if (!is_present) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("SPI Flash chip not present. Not saving UI settings.");
+ return;
+ }
+
+ // Since Flash storage has a limited number of write cycles,
+ // make sure that the data is different before rewriting.
+
+ if (verify_config_data(data, size)) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("UI settings already written, skipping write.");
+ return;
+ }
+
+ int16_t write_addr = get_config_write_offset(size);
+ if (write_addr == -1) {
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPGM("Erasing UI settings from SPI Flash... ");
+ #ifdef DATA_STORAGE_SIZE_64K
+ erase_sector_64k(0);
+ #else
+ erase_sector_4k(0);
+ #endif
+ write_addr = 0;
+ SERIAL_ECHOLNPGM("DONE");
+ }
+
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Writing UI settings to SPI Flash (offset ", write_addr);
+ SERIAL_ECHOPGM(")...");
+
+ const uint32_t delim = delimiter;
+ write_addr = write(write_addr, &delim, sizeof(delim));
+ write_addr = write(write_addr, data, size);
+
+ SERIAL_ECHOLNPGM("DONE");
+ }
+
+ /************************** VERSIONING INFO AREA ************************/
+
+ /* The version info area follows the data storage area. If the version
+ * is incorrect, the data on the chip is invalid and format_flash should
+ * be called.
+ */
+
+ typedef struct {
+ uint32_t magic;
+ uint32_t version;
+ } flash_version_info;
+
+ constexpr uint32_t version_info_addr = data_storage_area_size;
+ constexpr uint32_t version_info_size = 4 * 1024; // Small erase unit
+
+ bool UIFlashStorage::is_valid() {
+ flash_version_info info;
+
+ spi_read_begin(version_info_addr);
+ spi_read_bulk (&info, sizeof(flash_version_info));
+ spi_read_end();
+
+ return info.magic == delimiter && info.version == flash_eeprom_version;
+ }
+
+ void UIFlashStorage::write_version_info() {
+ flash_version_info info;
+
+ info.magic = delimiter;
+ info.version = flash_eeprom_version;
+
+ spi_write_begin(version_info_addr);
+ spi_write_bulk(&info, sizeof(flash_version_info));
+ spi_write_end();
+ }
+
+ /**************************** MEDIA STORAGE AREA *****************************/
+
+ /* The media storage area follows the versioning info area. It consists
+ * of a file index followed by the data for one or more media files.
+ *
+ * The file index consists of an array of 32-bit file sizes. If a file
+ * is not present, the file's size will be set to 0xFFFFFFFF
+ */
+
+ constexpr uint32_t media_storage_addr = version_info_addr + version_info_size;
+ constexpr uint8_t media_storage_slots = 4;
+
+ void UIFlashStorage::format_flash() {
+ SERIAL_ECHO_START(); SERIAL_ECHOPGM("Erasing SPI Flash...");
+ SPIFlash::erase_chip();
+ SERIAL_ECHOLNPGM("DONE");
+
+ write_version_info();
+ }
+
+ uint32_t UIFlashStorage::get_media_file_start(uint8_t slot) {
+ uint32_t addr = media_storage_addr + sizeof(uint32_t) * media_storage_slots;
+ spi_read_begin(media_storage_addr);
+ for(uint8_t i = 0; i < slot; i++) {
+ addr += spi_read_32();
+ }
+ spi_read_end();
+ return addr;
+ }
+
+ void UIFlashStorage::set_media_file_size(uint8_t slot, uint32_t size) {
+ spi_write_begin(media_storage_addr + sizeof(uint32_t) * slot);
+ spi_write_32(size);
+ spi_write_end();
+ }
+
+ uint32_t UIFlashStorage::get_media_file_size(uint8_t slot) {
+ spi_read_begin(media_storage_addr + sizeof(uint32_t) * slot);
+ uint32_t size = spi_read_32();
+ spi_read_end();
+ return size;
+ }
+
+ /* Writes a media file from the SD card/USB flash drive into a slot on the SPI Flash. Media
+ * files must be written sequentially following by a chip erase and it is not possible to
+ * overwrite files. */
+ UIFlashStorage::error_t UIFlashStorage::write_media_file(progmem_str filename, uint8_t slot) {
+ #if ENABLED(SDSUPPORT)
+ uint32_t addr;
+ uint8_t buff[write_page_size];
+
+ strcpy_P( (char*) buff, (const char*) filename);
+
+ MediaFileReader reader;
+ if (!reader.open((char*) buff)) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Unable to find media file");
+ return FILE_NOT_FOUND;
+ }
+
+ if (get_media_file_size(slot) != 0xFFFFFFFFUL) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPGM("Media file already exists");
+ return WOULD_OVERWRITE;
+ }
+
+ SERIAL_ECHO_START(); SERIAL_ECHOPGM("Writing SPI Flash...");
+
+ set_media_file_size(slot, reader.size());
+ addr = get_media_file_start(slot);
+
+ // Write out the file itself
+ for(;;) {
+ const int16_t nBytes = reader.read(buff, write_page_size);
+ if (nBytes == -1) {
+ SERIAL_ECHOLNPGM("Failed to read from file");
+ return READ_ERROR;
+ }
+
+ addr = write(addr, buff, nBytes);
+ if (nBytes != write_page_size)
+ break;
+
+ #if ENABLED(EXTENSIBLE_UI)
+ ExtUI::yield();
+ #endif
+ }
+
+ SERIAL_ECHOLNPGM("DONE");
+
+ SERIAL_ECHO_START(); SERIAL_ECHOPGM("Verifying SPI Flash...");
+
+ bool verifyOk = true;
+
+ // Verify the file index
+
+ if (get_media_file_start(slot+1) != (get_media_file_start(slot) + reader.size())) {
+ SERIAL_ECHOLNPGM("File index verification failed. ");
+ verifyOk = false;
+ }
+
+ // Verify the file itself
+ addr = get_media_file_start(slot);
+ reader.rewind();
+
+ while (verifyOk) {
+ const int16_t nBytes = reader.read(buff, write_page_size);
+ if (nBytes == -1) {
+ SERIAL_ECHOPGM("Failed to read from file");
+ verifyOk = false;
+ break;
+ }
+
+ spi_read_begin(addr);
+ if (!spi_verify_bulk(buff, nBytes)) {
+ verifyOk = false;
+ spi_read_end();
+ break;
+ }
+ spi_read_end();
+
+ addr += nBytes;
+ if (nBytes != write_page_size) break;
+ #if ENABLED(EXTENSIBLE_UI)
+ ExtUI::yield();
+ #endif
+ };
+
+ if (verifyOk) {
+ SERIAL_ECHOLNPGM("DONE");
+ return SUCCESS;
+ } else {
+ SERIAL_ECHOLNPGM("FAIL");
+ return VERIFY_ERROR;
+ }
+ #else
+ return VERIFY_ERROR;
+ #endif // ENABLED(SDSUPPORT)
+ }
+
+ bool UIFlashStorage::BootMediaReader::isAvailable(uint32_t slot) {
+ if (!is_present) return false;
+
+ bytes_remaining = get_media_file_size(slot);
+ if (bytes_remaining != 0xFFFFFFFFUL) {
+ SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR("Boot media file size:", bytes_remaining);
+ addr = get_media_file_start(slot);
+ return true;
+ } else {
+ return false;
+ }
+ }
+
+ int16_t UIFlashStorage::BootMediaReader::read(void *data, const size_t size) {
+ if (bytes_remaining == 0xFFFFFFFFUL) return -1;
+
+ if (size > bytes_remaining)
+ return read(data, bytes_remaining);
+
+ if (size > 0) {
+ spi_read_begin(addr);
+ spi_read_bulk(data, size);
+ spi_read_end();
+ addr += size;
+ bytes_remaining -= size;
+ }
+
+ return size;
+ }
+
+ int16_t UIFlashStorage::BootMediaReader::read(void *obj, void *data, const size_t size) {
+ return reinterpret_cast(obj)->read(data, size);
+ }
+
+#else
+ void UIFlashStorage::initialize() {}
+ bool UIFlashStorage::is_valid() {return true;}
+ void UIFlashStorage::write_config_data(const void *, size_t) {}
+ bool UIFlashStorage::verify_config_data(const void *, size_t) {return false;}
+ bool UIFlashStorage::read_config_data(void *, size_t ) {return false;}
+ UIFlashStorage::error_t UIFlashStorage::write_media_file(progmem_str, uint8_t) {return FILE_NOT_FOUND;}
+ void UIFlashStorage::format_flash() {}
+
+ bool UIFlashStorage::BootMediaReader::isAvailable(uint32_t) {return false;}
+ int16_t UIFlashStorage::BootMediaReader::read(void *, const size_t) {return -1;}
+ int16_t UIFlashStorage::BootMediaReader::read(void *, void *, const size_t) {return -1;}
+#endif // SPI_FLASH_SS
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.h
new file mode 100644
index 0000000000..85863320bf
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/flash_storage.h
@@ -0,0 +1,110 @@
+/*******************
+ * flash_storage.h *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#ifdef LULZBOT_TOUCH_UI
+
+class SPIFlash {
+ public:
+ static constexpr uint32_t erase_unit_size = 4 * 1024; // Minimum erase unit
+ static constexpr uint32_t write_page_size = 256; // Minimum page write unit
+
+ enum {
+ READ_STATUS_1 = 0x05,
+ READ_STATUS_2 = 0x35,
+ READ_STATUS_3 = 0x33,
+ WRITE_ENABLE = 0x06,
+ WRITE_DISABLE = 0x04,
+ READ_ID = 0x90,
+ READ_JEDEC_ID = 0x9F,
+ READ_DATA = 0x03,
+ PAGE_PROGRAM = 0x02,
+ ERASE_4K = 0x20,
+ ERASE_64K = 0xD8,
+ ERASE_CHIP = 0xC7
+ };
+
+ static void wait_while_busy();
+ static void erase_sector_4k(uint32_t addr);
+ static void erase_sector_64k(uint32_t addr);
+ static void erase_chip ();
+
+ static void read_jedec_id(uint8_t &manufacturer_id, uint8_t &device_type, uint8_t &capacity);
+
+ static void spi_read_begin(uint32_t addr);
+ static void spi_read_end();
+
+ static void spi_write_begin(uint32_t addr);
+ static void spi_write_end();
+
+ static uint32_t write(uint32_t addr, const void *data, size_t size);
+ static uint32_t read(uint32_t addr, void *data, size_t size);
+};
+
+class UIFlashStorage : private SPIFlash {
+ private:
+
+ static bool is_present;
+ static int32_t get_config_read_offset(uint32_t block_size);
+ static int32_t get_config_write_offset(uint32_t block_size);
+
+ static uint32_t get_media_file_start(uint8_t slot);
+ static void set_media_file_size(uint8_t slot, uint32_t size);
+ static uint32_t get_media_file_size(uint8_t slot);
+
+ static constexpr uint32_t delimiter = 0x4C554C5A; // 'LULZ'
+ public:
+ enum error_t {
+ SUCCESS,
+ FILE_NOT_FOUND,
+ READ_ERROR,
+ VERIFY_ERROR,
+ WOULD_OVERWRITE
+ };
+
+ static void initialize ();
+ static void format_flash ();
+ static bool check_known_device();
+
+ static bool is_valid ();
+ static void write_version_info();
+
+ static void write_config_data (const void *data, size_t size);
+ static bool verify_config_data (const void *data, size_t size);
+ static bool read_config_data (void *data, size_t size);
+ static error_t write_media_file (progmem_str filename, uint8_t slot = 0);
+
+ class BootMediaReader;
+};
+
+class UIFlashStorage::BootMediaReader {
+ private:
+ uint32_t addr;
+ uint32_t bytes_remaining;
+
+ public:
+ bool isAvailable(uint32_t slot = 0);
+ int16_t read(void *buffer, size_t const size);
+
+ static int16_t read(void *obj, void *buffer, const size_t size);
+};
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.cpp
new file mode 100644
index 0000000000..82ceba0552
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.cpp
@@ -0,0 +1,63 @@
+/************************
+ * media_filereader.cpp *
+ ************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../compat.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+ #include "media_file_reader.h"
+
+ #if ENABLED(SDSUPPORT)
+ bool MediaFileReader::open(const char* filename) {
+ card.init(SPI_SPEED, SDSS);
+ volume.init(&card);
+ root.openRoot(&volume);
+ return file.open(&root, filename, O_READ);
+ }
+
+ int16_t MediaFileReader::read(void *buff, size_t bytes) {
+ return file.read(buff, bytes);
+ }
+
+ void MediaFileReader::close() {
+ file.close();
+ }
+
+ uint32_t MediaFileReader::size() {
+ return file.fileSize();
+ }
+
+ void MediaFileReader::rewind() {
+ file.rewind();
+ }
+
+ int16_t MediaFileReader::read(void *obj, void *buff, size_t bytes) {
+ return reinterpret_cast(obj)->read(buff, bytes);
+ }
+ #else
+ bool MediaFileReader::open(const char*) {return -1;}
+ int16_t MediaFileReader::read(void *, size_t) {return 0;}
+ void MediaFileReader::close() {}
+ uint32_t MediaFileReader::size() {return 0;}
+ void MediaFileReader::rewind() {}
+ int16_t MediaFileReader::read(void *, void *, size_t) {return 0;}
+ #endif
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.h
new file mode 100644
index 0000000000..59a73ffbcc
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/archim2-flash/media_file_reader.h
@@ -0,0 +1,44 @@
+/**********************
+ * media_filereader.h *
+ **********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "../../../../../sd/SdFile.h"
+#include "../../../../../sd/cardreader.h"
+
+class MediaFileReader {
+ private:
+ #if ENABLED(SDSUPPORT)
+ Sd2Card card;
+ SdVolume volume;
+ SdFile root, file;
+ #endif
+
+ public:
+ bool open(const char* filename);
+ int16_t read(void *buff, size_t bytes);
+ uint32_t size();
+ void rewind();
+ void close();
+
+ static int16_t read(void *obj, void *buff, size_t bytes);
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/compat.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/compat.h
new file mode 100644
index 0000000000..c595692bd2
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/compat.h
@@ -0,0 +1,61 @@
+/************
+ * compat.h *
+ ************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/**
+ * This following provides compatibility whether compiling
+ * as a part of Marlin or outside it
+ */
+
+#if defined __has_include
+ #if __has_include ("../../ui_api.h")
+ #include "../../ui_api.h"
+ #endif
+#else
+ #include "../../ui_api.h"
+#endif
+
+#ifdef __MARLIN_FIRMWARE__
+ // If __MARLIN_FIRMWARE__ exists, then we are being
+ // compiled inside Marlin.
+ #include "pin_mappings.h"
+#else
+ // Messages that are declared in Marlin
+ #define WELCOME_MSG "Printer Ready"
+ #define MSG_SD_INSERTED "Media Inserted"
+ #define MSG_SD_REMOVED "Media Removed"
+
+ // Define macros for compatibility
+ #define EXTENSIBLE_UI
+ #define _CAT(a, ...) a ## __VA_ARGS__
+ #define SWITCH_ENABLED_ 1
+ #define ENABLED(b) _CAT(SWITCH_ENABLED_, b)
+ #define DISABLED(b) !ENABLED(b)
+
+ namespace UI {
+ static inline uint32_t safe_millis() {return millis();};
+ static inline void yield() {};
+ };
+#endif
+
+class __FlashStringHelper;
+typedef const __FlashStringHelper *progmem_str;
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/config.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/config.h
new file mode 100644
index 0000000000..fe41f58e54
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/config.h
@@ -0,0 +1,98 @@
+/************
+ * config.h *
+ ************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "compat.h"
+
+// Define the display board used (see "ftdi_eve_boards.h" for definitions)
+
+//#define LCD_FTDI_VM800B35A // FTDI 3.5" 320x240 with FT800
+//#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" 480x272
+//#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" 480x272
+//#define LCD_HAOYU_FT810CB // Haoyu with 5" 800x480
+//#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD User Interface
+
+// Leave the following commented out to use a board's default resolution.
+// If you have changed the LCD panel, you may override the resolution
+// below (see "ftdi_eve_resolutions.h" for definitions):
+
+//#define TOUCH_UI_320x240
+//#define TOUCH_UI_480x272
+//#define TOUCH_UI_800x480
+
+// Define the printer interface or pins used (see "ui_pin_mappings.h" for definitions):
+
+//#define CR10_TFT_PINMAP
+//#define AO_EXP1_DEPRECATED_PINMAP // UltraLCD EXP1 connector, old AlephObject's wiring
+//#define AO_EXP1_PINMAP // UltraLCD EXP1 connector, new AlephObject's wiring
+//#define AO_EXP2_PINMAP // UltraLCD EXP2 connector, new AlephObject's wiring
+//#define OTHER_PIN_LAYOUT
+
+// Otherwise. Define all the pins manually:
+
+#ifdef OTHER_PIN_LAYOUT
+ // Select interfacing pins, the following pin specifiers are supported:
+ //
+ // ARDUINO_DIGITAL_1 - Arduino pin via digitalWrite/digitalRead
+ // AVR_A1 - Fast AVR port access via PORTA/PINA/DDRA
+ // 1 - When compiling Marlin, use Marlin pin IDs.
+
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #ifdef CLCD_USE_SOFT_SPI
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+#endif
+
+// Defines how to orient the display. An inverted (i.e. upside-down) display
+// is supported on the FT800. The FT810 or better also support a portrait
+// and mirrored orientation.
+//#define TOUCH_UI_INVERTED
+//#define TOUCH_UI_PORTRAIT
+//#define TOUCH_UI_MIRRORED
+
+// Use a numeric passcode for "Parental lock".
+// This is a recommended for smaller displays.
+//#define TOUCH_UI_PASSCODE
+
+// Define number of seconds after which the menu screens
+// timeout and returns the user to the status screen
+//#define LCD_TIMEOUT_TO_STATUS 120
+
+// Enable this to debug the event framework
+//#define UI_FRAMEWORK_DEBUG
+
+// Enable the developer's menu and screens
+//#define DEVELOPER_SCREENS
+
+// Maximum feed rate for manual extrusion (mm/s)
+//#define MAX_MANUAL_FEEDRATE 240
+
+// Sets the SPI speed in Hz
+
+#define SPI_FREQUENCY 8000000 >> SPI_SPEED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/LICENSE.txt b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/LICENSE.txt
new file mode 100644
index 0000000000..94a9ed024d
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/LICENSE.txt
@@ -0,0 +1,674 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc.
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+ The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works. By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users. We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors. You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+ To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights. Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received. You must make sure that they, too, receive
+or can get the source code. And you must show them these terms so they
+know their rights.
+
+ Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+ For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software. For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+ Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so. This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software. The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable. Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products. If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+ Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary. To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ TERMS AND CONDITIONS
+
+ 0. Definitions.
+
+ "This License" refers to version 3 of the GNU General Public License.
+
+ "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+ "The Program" refers to any copyrightable work licensed under this
+License. Each licensee is addressed as "you". "Licensees" and
+"recipients" may be individuals or organizations.
+
+ To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy. The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+ A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+ To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy. Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+ To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies. Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+ An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License. If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+ 1. Source Code.
+
+ The "source code" for a work means the preferred form of the work
+for making modifications to it. "Object code" means any non-source
+form of a work.
+
+ A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+ The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form. A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+ The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities. However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work. For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+ The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+ The Corresponding Source for a work in source code form is that
+same work.
+
+ 2. Basic Permissions.
+
+ All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met. This License explicitly affirms your unlimited
+permission to run the unmodified Program. The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work. This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+ You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force. You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright. Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+ Conveying under any other circumstances is permitted solely under
+the conditions stated below. Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+ 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+ No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+ When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+ 4. Conveying Verbatim Copies.
+
+ You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+ You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+ 5. Conveying Modified Source Versions.
+
+ You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+ a) The work must carry prominent notices stating that you modified
+ it, and giving a relevant date.
+
+ b) The work must carry prominent notices stating that it is
+ released under this License and any conditions added under section
+ 7. This requirement modifies the requirement in section 4 to
+ "keep intact all notices".
+
+ c) You must license the entire work, as a whole, under this
+ License to anyone who comes into possession of a copy. This
+ License will therefore apply, along with any applicable section 7
+ additional terms, to the whole of the work, and all its parts,
+ regardless of how they are packaged. This License gives no
+ permission to license the work in any other way, but it does not
+ invalidate such permission if you have separately received it.
+
+ d) If the work has interactive user interfaces, each must display
+ Appropriate Legal Notices; however, if the Program has interactive
+ interfaces that do not display Appropriate Legal Notices, your
+ work need not make them do so.
+
+ A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit. Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+ 6. Conveying Non-Source Forms.
+
+ You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+ a) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by the
+ Corresponding Source fixed on a durable physical medium
+ customarily used for software interchange.
+
+ b) Convey the object code in, or embodied in, a physical product
+ (including a physical distribution medium), accompanied by a
+ written offer, valid for at least three years and valid for as
+ long as you offer spare parts or customer support for that product
+ model, to give anyone who possesses the object code either (1) a
+ copy of the Corresponding Source for all the software in the
+ product that is covered by this License, on a durable physical
+ medium customarily used for software interchange, for a price no
+ more than your reasonable cost of physically performing this
+ conveying of source, or (2) access to copy the
+ Corresponding Source from a network server at no charge.
+
+ c) Convey individual copies of the object code with a copy of the
+ written offer to provide the Corresponding Source. This
+ alternative is allowed only occasionally and noncommercially, and
+ only if you received the object code with such an offer, in accord
+ with subsection 6b.
+
+ d) Convey the object code by offering access from a designated
+ place (gratis or for a charge), and offer equivalent access to the
+ Corresponding Source in the same way through the same place at no
+ further charge. You need not require recipients to copy the
+ Corresponding Source along with the object code. If the place to
+ copy the object code is a network server, the Corresponding Source
+ may be on a different server (operated by you or a third party)
+ that supports equivalent copying facilities, provided you maintain
+ clear directions next to the object code saying where to find the
+ Corresponding Source. Regardless of what server hosts the
+ Corresponding Source, you remain obligated to ensure that it is
+ available for as long as needed to satisfy these requirements.
+
+ e) Convey the object code using peer-to-peer transmission, provided
+ you inform other peers where the object code and Corresponding
+ Source of the work are being offered to the general public at no
+ charge under subsection 6d.
+
+ A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+ A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling. In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage. For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product. A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+ "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source. The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+ If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information. But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+ The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed. Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+ Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+ 7. Additional Terms.
+
+ "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law. If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+ When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it. (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.) You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+ Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+ a) Disclaiming warranty or limiting liability differently from the
+ terms of sections 15 and 16 of this License; or
+
+ b) Requiring preservation of specified reasonable legal notices or
+ author attributions in that material or in the Appropriate Legal
+ Notices displayed by works containing it; or
+
+ c) Prohibiting misrepresentation of the origin of that material, or
+ requiring that modified versions of such material be marked in
+ reasonable ways as different from the original version; or
+
+ d) Limiting the use for publicity purposes of names of licensors or
+ authors of the material; or
+
+ e) Declining to grant rights under trademark law for use of some
+ trade names, trademarks, or service marks; or
+
+ f) Requiring indemnification of licensors and authors of that
+ material by anyone who conveys the material (or modified versions of
+ it) with contractual assumptions of liability to the recipient, for
+ any liability that these contractual assumptions directly impose on
+ those licensors and authors.
+
+ All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10. If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term. If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+ If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+ Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+ 8. Termination.
+
+ You may not propagate or modify a covered work except as expressly
+provided under this License. Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+ However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+ Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+ Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License. If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+ 9. Acceptance Not Required for Having Copies.
+
+ You are not required to accept this License in order to receive or
+run a copy of the Program. Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance. However,
+nothing other than this License grants you permission to propagate or
+modify any covered work. These actions infringe copyright if you do
+not accept this License. Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+ 10. Automatic Licensing of Downstream Recipients.
+
+ Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License. You are not responsible
+for enforcing compliance by third parties with this License.
+
+ An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations. If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+ You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License. For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+ 11. Patents.
+
+ A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based. The
+work thus licensed is called the contributor's "contributor version".
+
+ A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version. For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+ Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+ In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement). To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+ If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients. "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+ If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+ A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License. You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+ Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+ 12. No Surrender of Others' Freedom.
+
+ If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all. For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+ 13. Use with the GNU Affero General Public License.
+
+ Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work. The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+ 14. Revised Versions of this License.
+
+ The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+ Each version is given a distinguishing version number. If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation. If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+ If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+ Later license versions may give you additional or different
+permissions. However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+ 15. Disclaimer of Warranty.
+
+ THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. Limitation of Liability.
+
+ IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+ 17. Interpretation of Sections 15 and 16.
+
+ If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+
+ Copyright (C)
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see .
+
+Also add information on how to contact you by electronic and paper mail.
+
+ If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+ Copyright (C)
+ This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+ You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+.
+
+ The GNU General Public License does not permit incorporating your program
+into proprietary programs. If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License. But first, please read
+.
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/README.md b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/README.md
new file mode 100644
index 0000000000..6ba985d600
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/README.md
@@ -0,0 +1,28 @@
+FTDI EVE Library
+----------------
+
+The FTDI EVE Library is a fully open-source library and UI framework for the FTDI
+FT800 and FT810 graphics processor.
+
+Although the library has been developed within Lulzbot for providing a user interface
+for Marlin, the library has been written so that it can be used in any Arduino sketch.
+
+The library is split into two parts. The "basic" API provides a shallow interface to
+the underlying FTDI hardware and command FIFO and provides low-level access to the
+hardware as closely as possible to the API described in the FTDI Programmer's Guide.
+
+The "extended" API builds on top of the "basic" API to provide a GUI framework for
+handling common challenges in building a usable GUI. The GUI framework provides the
+following features:
+
+- Macros for a resolution-independent placement of widgets based on a grid.
+- Class-based UI screens, with press and unpress touch events, as well as touch repeat.
+- Event loop with button debouncing and button push visual and auditory feedback.
+- Easy screen-to-screen navigation including a navigation stack for going backwards.
+- Visual feedback for disabled vs enabled buttons, and custom button styles.
+- A sound player class for playing individual notes or complete sound sequences.
+- Display list caching, for storing static background elements of a screen in RAM_G.
+
+See the "examples" folder for Arduino sketches. Modify the "src/config.h" file in
+each to suit your particular setup. The "sample_configs" contain sample configuration
+files for running the sketches on our 3D printer boards.
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/boards.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/boards.h
new file mode 100644
index 0000000000..85e12238f2
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/boards.h
@@ -0,0 +1,183 @@
+/************
+ * boards.h *
+ ************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#define HAS_RESOLUTION (defined(TOUCH_UI_320x240) || defined(TOUCH_UI_480x272) || defined(TOUCH_UI_800x480))
+
+#define IS_FT800 \
+ constexpr uint16_t ftdi_chip = 800; \
+ using namespace FTDI_FT800; \
+ namespace DL { \
+ using namespace FTDI_FT800_DL; \
+ } \
+ typedef ft800_memory_map ftdi_memory_map; \
+ typedef ft800_registers ftdi_registers;
+
+#define IS_FT810 \
+ constexpr uint16_t ftdi_chip = 810; \
+ using namespace FTDI_FT810; \
+ namespace DL { \
+ using namespace FTDI_FT800_DL; \
+ using namespace FTDI_FT810_DL; \
+ } \
+ typedef ft810_memory_map ftdi_memory_map; \
+ typedef ft810_registers ftdi_registers;
+
+
+#ifdef LCD_FTDI_VM800B35A
+ #if !HAS_RESOLUTION
+ #define TOUCH_UI_320x240
+ #endif
+ #ifndef FTDI_API_LEVEL
+ #define FTDI_API_LEVEL 800
+ #endif
+ namespace FTDI {
+ IS_FT800
+ constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated
+ constexpr bool GPIO_0_Audio_Enable = false; /* 1 = does use GPIO00 for amplifier control, 0 = not in use for Audio */
+ constexpr bool GPIO_1_Audio_Shutdown = true; /* 1 = does use GPIO01 for amplifier control, 0 = not in use for Audio */
+ constexpr uint8_t Swizzle = 2;
+ constexpr uint8_t CSpread = 1;
+
+ constexpr uint16_t touch_threshold = 1200; /* touch-sensitivity */
+ }
+
+/*
+ * Settings for the Haoyu Electronics, 4.3" Graphical LCD Touchscreen, 480x272, SPI, FT800 (FT800CB-HY43B)
+ * Haoyu Electronics, 5" Graphical LCD Touchscreen, 480x272, SPI, FT800 (FT800CB-HY50B)
+ *
+ * http://www.hotmcu.com/43-graphical-lcd-touchscreen-480x272-spi-ft800-p-111.html?cPath=6_16
+ * http://www.hotmcu.com/5-graphical-lcd-touchscreen-480x272-spi-ft800-p-124.html?cPath=6_16
+ *
+ * Datasheet:
+ *
+ * http://www.hantronix.com/files/data/1278363262430-3.pdf
+ * http://www.haoyuelectronics.com/Attachment/HY43-LCD/LCD%20DataSheet.pdf
+ * http://www.haoyuelectronics.com/Attachment/HY5-LCD-HD/KD50G21-40NT-A1.pdf
+ *
+ */
+
+#elif defined(LCD_HAOYU_FT800CB)
+ #if !HAS_RESOLUTION
+ #define TOUCH_UI_480x272
+ #endif
+ #ifndef FTDI_API_LEVEL
+ #define FTDI_API_LEVEL 800
+ #endif
+ namespace FTDI {
+ IS_FT800
+ constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated
+ constexpr bool GPIO_0_Audio_Enable = false;
+ constexpr bool GPIO_1_Audio_Shutdown = false;
+ constexpr uint8_t Swizzle = 0;
+ constexpr uint8_t CSpread = 1;
+ constexpr uint16_t touch_threshold = 2000; /* touch-sensitivity */
+ }
+
+/*
+ * Settings for the Haoyu Electronics, 5" Graphical LCD Touchscreen, 800x480, SPI, FT810
+ *
+ * http://www.hotmcu.com/5-graphical-lcd-touchscreen-800x480-spi-ft810-p-286.html
+ *
+ * Datasheet:
+ *
+ * http://www.haoyuelectronics.com/Attachment/HY5-LCD-HD/KD50G21-40NT-A1.pdf
+ *
+ */
+
+#elif defined(LCD_HAOYU_FT810CB)
+ #if !HAS_RESOLUTION
+ #define TOUCH_UI_800x480
+ #endif
+ #ifndef FTDI_API_LEVEL
+ #define FTDI_API_LEVEL 810
+ #endif
+ namespace FTDI {
+ IS_FT810
+ constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated
+ constexpr bool GPIO_0_Audio_Enable = false;
+ constexpr bool GPIO_1_Audio_Shutdown = false;
+ constexpr uint8_t Swizzle = 0;
+ constexpr uint8_t CSpread = 1;
+ constexpr uint16_t touch_threshold = 2000; /* touch-sensitivity */
+ }
+
+/*
+ * Settings for the 4D Systems, 4.3" Embedded SPI Display 480x272, SPI, FT800 (4DLCD-FT843)
+ *
+ * http://www.4dsystems.com.au/product/4DLCD_FT843/
+ *
+ * Datasheet:
+ *
+ * http://www.4dsystems.com.au/productpages/4DLCD-FT843/downloads/FT843-4.3-Display_datasheet_R_1_2.pdf
+ *
+ */
+
+#elif defined(LCD_4DSYSTEMS_4DLCD_FT843)
+ #if !HAS_RESOLUTION
+ #define TOUCH_UI_480x272
+ #endif
+ #ifndef FTDI_API_LEVEL
+ #define FTDI_API_LEVEL 800
+ #endif
+ namespace FTDI {
+ IS_FT800
+ constexpr bool Use_Crystal = true; // 0 = use internal oscillator, 1 = module has a crystal populated
+ constexpr bool GPIO_0_Audio_Enable = false;
+ constexpr bool GPIO_1_Audio_Shutdown = true;
+ constexpr uint8_t Swizzle = 0;
+ constexpr uint8_t CSpread = 1;
+ constexpr uint16_t touch_threshold = 1200; /* touch-sensitivity */
+ }
+
+/*
+ * Settings for the Aleph Objects Color LCD User Interface
+ *
+ * https://code.alephobjects.com/source/aotctl/
+ *
+ * Datasheet:
+ *
+ * http://www.hantronix.com/files/data/s1501799605s500-gh7.pdf
+ *
+ */
+#elif defined(LCD_ALEPHOBJECTS_CLCD_UI)
+ #if !HAS_RESOLUTION
+ #define TOUCH_UI_800x480
+ #endif
+ #ifndef FTDI_API_LEVEL
+ #define FTDI_API_LEVEL 810
+ #endif
+ namespace FTDI {
+ IS_FT810
+ constexpr bool Use_Crystal = false; // 0 = use internal oscillator, 1 = module has a crystal populated
+ constexpr bool GPIO_0_Audio_Enable = true; // The AO CLCD uses GPIO0 to enable audio
+ constexpr bool GPIO_1_Audio_Shutdown = false;
+ constexpr uint8_t Swizzle = 0;
+ constexpr uint8_t CSpread = 0;
+ constexpr uint16_t touch_threshold = 2000; /* touch-sensitivity */
+ }
+
+#else
+
+ #error Unknown or no LULZBOT_TOUCH_UI board specified. To add a new board, modify "ftdi_eve_boards.h"
+#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.cpp
new file mode 100644
index 0000000000..fc296c8ebc
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.cpp
@@ -0,0 +1,1174 @@
+/****************
+ * commands.cpp *
+ ****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_basic.h"
+
+#ifdef FTDI_BASIC
+
+#define MULTIPLE_OF_4(val) ((((val)+3)>>2)<<2)
+
+using namespace FTDI;
+using namespace FTDI::SPI;
+
+void CLCD::enable (void) {
+ mem_write_8(REG::PCLK, Pclk);
+}
+
+void CLCD::disable (void) {
+ mem_write_8(REG::PCLK, 0x00);
+}
+
+void CLCD::set_brightness (uint8_t brightness) {
+ mem_write_8(REG::PWM_DUTY, min(128,brightness));
+}
+
+uint8_t CLCD::get_brightness() {
+ return mem_read_8(REG::PWM_DUTY);
+}
+
+void CLCD::turn_on_backlight (void) {
+ mem_write_8(REG::PWM_DUTY, 128);
+}
+
+void CLCD::FontMetrics::load(const uint8_t font) {
+ uint32_t rom_fontroot = mem_read_32(MAP::ROM_FONT_ADDR);
+ mem_read_bulk(rom_fontroot + 148 * (font - 16), (uint8_t*) this, 148);
+}
+
+uint16_t CLCD::FontMetrics::get_text_width(const char *str, size_t n) const {
+ uint16_t width = 0;
+ const uint8_t *p = (const uint8_t *) str;
+ for(;;) {
+ const uint8_t val = *p++; n--;
+ if (!val || n == 0) break;
+ width += val < 128 ? char_widths[val] : 0;
+ }
+ return width;
+}
+
+uint16_t CLCD::FontMetrics::get_text_width_P(const char *str, size_t n) const {
+ uint16_t width = 0;
+ const uint8_t *p = (const uint8_t *) str;
+ for(;;) {
+ const uint8_t val = pgm_read_byte(p++); n--;
+ if (!val || n == 0) break;
+ width += val < 128 ? char_widths[val] : 0;
+ }
+ return width;
+}
+
+/************************** HOST COMMAND FUNCTION *********************************/
+
+void CLCD::host_cmd (unsigned char host_command, unsigned char byte2) { // Sends 24-Bit Host Command to LCD
+ if (host_command != ACTIVE) {
+ host_command |= 0x40;
+ }
+ spi_ftdi_select();
+ spi_send(host_command);
+ spi_send(byte2);
+ spi_send(0x00);
+ spi_ftdi_deselect();
+}
+
+/************************** MEMORY READ FUNCTIONS *********************************/
+
+void CLCD::spi_read_addr (uint32_t reg_address) {
+ spi_send((reg_address >> 16) & 0x3F); // Address [21:16]
+ spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
+ spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
+ spi_send(0x00); // Dummy Byte
+}
+
+// Write 4-Byte Address, Read Multiple Bytes
+void CLCD::mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len) {
+ spi_ftdi_select();
+ spi_read_addr(reg_address);
+ spi_read_bulk (data, len);
+ spi_ftdi_deselect();
+}
+
+// Write 4-Byte Address, Read 1-Byte Data
+uint8_t CLCD::mem_read_8 (uint32_t reg_address) {
+ spi_ftdi_select();
+ spi_read_addr(reg_address);
+ uint8_t r_data = spi_read_8();
+ spi_ftdi_deselect();
+ return r_data;
+}
+
+// Write 4-Byte Address, Read 2-Bytes Data
+uint16_t CLCD::mem_read_16 (uint32_t reg_address) {
+ using namespace SPI::least_significant_byte_first;
+ spi_ftdi_select();
+ spi_read_addr(reg_address);
+ uint16_t r_data = spi_read_16();
+ spi_ftdi_deselect();
+ return r_data;
+}
+
+// Write 4-Byte Address, Read 4-Bytes Data
+uint32_t CLCD::mem_read_32 (uint32_t reg_address) {
+ using namespace SPI::least_significant_byte_first;
+ spi_ftdi_select();
+ spi_read_addr(reg_address);
+ uint32_t r_data = spi_read_32();
+ spi_ftdi_deselect();
+ return r_data;
+}
+
+/************************** MEMORY WRITE FUNCTIONS *********************************/
+
+// Generic operations for transforming a byte, for use with _mem_write_bulk:
+static inline uint8_t reverse_byte(uint8_t a) {
+ return ((a & 0x1) << 7) | ((a & 0x2) << 5) |
+ ((a & 0x4) << 3) | ((a & 0x8) << 1) |
+ ((a & 0x10) >> 1) | ((a & 0x20) >> 3) |
+ ((a & 0x40) >> 5) | ((a & 0x80) >> 7);
+}
+static inline uint8_t xbm_write(const uint8_t *p) {return reverse_byte(pgm_read_byte(p));}
+
+void CLCD::spi_write_addr (uint32_t reg_address) {
+ spi_send((reg_address >> 16) | 0x80); // Address [21:16]
+ spi_send((reg_address >> 8 ) & 0xFF); // Address [15:8]
+ spi_send((reg_address >> 0) & 0xFF); // Address [7:0]
+}
+
+// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from RAM
+void CLCD::mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_bulk(data, len, padding);
+ spi_ftdi_deselect();
+}
+
+// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
+void CLCD::mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding) {
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_bulk(str, len, padding);
+ spi_ftdi_deselect();
+}
+
+ // Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM
+void CLCD::mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding) {
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_bulk(data, len, padding);
+ spi_ftdi_deselect();
+}
+
+// Write 3-Byte Address, Multiple Bytes, plus padding bytes, from PROGMEM, reversing bytes (suitable for loading XBM images)
+void CLCD::mem_write_xbm (uint32_t reg_address, progmem_str data, uint16_t len, uint8_t padding) {
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_bulk(data, len, padding);
+ spi_ftdi_deselect();
+}
+
+// Write 3-Byte Address, Write 1-Byte Data
+void CLCD::mem_write_8 (uint32_t reg_address, uint8_t data) {
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_8(data);
+ spi_ftdi_deselect();
+}
+
+// Write 3-Byte Address, Write 2-Bytes Data
+void CLCD::mem_write_16 (uint32_t reg_address, uint16_t data) {
+ using namespace SPI::least_significant_byte_first;
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_32(data);
+ spi_ftdi_deselect();
+}
+
+// Write 3-Byte Address, Write 4-Bytes Data
+void CLCD::mem_write_32 (uint32_t reg_address, uint32_t data) {
+ using namespace SPI::least_significant_byte_first;
+ spi_ftdi_select();
+ spi_write_addr(reg_address);
+ spi_write_32(data);
+ spi_ftdi_deselect();
+}
+
+/******************* FT800/810 Co-processor Commands *********************************/
+
+#if FTDI_API_LEVEL == 800
+uint32_t CLCD::CommandFifo::command_write_ptr = 0xFFFFFFFFul;
+#endif
+
+void CLCD::CommandFifo::cmd(uint32_t cmd32) {
+ write((void*)&cmd32, sizeof(uint32_t));
+}
+
+void CLCD::CommandFifo::cmd(void* data, uint16_t len) {
+ write(data, len);
+}
+
+void CLCD::CommandFifo::bgcolor(uint32_t rgb) {
+ cmd(CMD_BGCOLOR);
+ cmd(rgb);
+}
+
+void CLCD::CommandFifo::fgcolor(uint32_t rgb) {
+ cmd(CMD_FGCOLOR);
+ cmd(rgb);
+}
+
+void CLCD::CommandFifo::gradcolor(uint32_t rgb) {
+ cmd(CMD_GRADCOLOR);
+ cmd(rgb);
+}
+
+// This sends the a text command to the command preprocessor, must be followed by str()
+void CLCD::CommandFifo::button(int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t option) {
+ struct {
+ int32_t type = CMD_BUTTON;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ int16_t h;
+ int16_t font;
+ uint16_t option;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.font = font;
+ cmd_data.option = option;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+// This sends the a text command to the command preprocessor, must be followed by str()
+void CLCD::CommandFifo::text(int16_t x, int16_t y, int16_t font, uint16_t options) {
+ struct {
+ int32_t type = CMD_TEXT;
+ int16_t x;
+ int16_t y;
+ int16_t font;
+ uint16_t options;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.font = font;
+ cmd_data.options = options;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+// This sends the a toggle command to the command preprocessor, must be followed by str()
+void CLCD::CommandFifo::toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state) {
+ struct {
+ int32_t type = CMD_TOGGLE;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ int16_t font;
+ uint16_t options;
+ uint16_t state;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.font = font;
+ cmd_data.options = options;
+ cmd_data.state = state ? 65535 : 0;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+// This sends the a keys command to the command preprocessor, must be followed by str()
+void CLCD::CommandFifo::keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options) {
+ struct {
+ int32_t type = CMD_KEYS;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ int16_t h;
+ int16_t font;
+ uint16_t options;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.font = font;
+ cmd_data.options = options;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms)
+{
+ struct {
+ int32_t type = CMD_CLOCK;
+ int16_t x;
+ int16_t y;
+ int16_t r;
+ uint16_t options;
+ int16_t h;
+ int16_t m;
+ int16_t s;
+ int16_t ms;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.r = r;
+ cmd_data.options = options;
+ cmd_data.h = h;
+ cmd_data.m = m;
+ cmd_data.s = s;
+ cmd_data.ms = ms;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range)
+{
+ struct {
+ int32_t type = CMD_GAUGE;
+ int16_t x;
+ int16_t y;
+ int16_t r;
+ uint16_t options;
+ uint16_t major;
+ uint16_t minor;
+ uint16_t val;
+ uint16_t range;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.r = r;
+ cmd_data.options = options;
+ cmd_data.major = major;
+ cmd_data.minor = minor;
+ cmd_data.val = val;
+ cmd_data.range = range;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val)
+{
+ struct {
+ int32_t type = CMD_DIAL;
+ int16_t x;
+ int16_t y;
+ int16_t r;
+ uint16_t options;
+ uint16_t val;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.r = r;
+ cmd_data.options = options;
+ cmd_data.val = val;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range) {
+ struct {
+ int32_t type = CMD_SCROLLBAR;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ uint16_t h;
+ uint16_t options;
+ uint16_t val;
+ uint16_t size;
+ uint16_t range;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.options = options;
+ cmd_data.val = val;
+ cmd_data.size = size;
+ cmd_data.range = range;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
+ struct {
+ int32_t type = CMD_PROGRESS;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ int16_t h;
+ uint16_t options;
+ uint16_t val;
+ uint16_t range;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.options = options;
+ cmd_data.val = val;
+ cmd_data.range = range;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range) {
+ struct {
+ int32_t type = CMD_SLIDER;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ int16_t h;
+ uint16_t options;
+ uint16_t val;
+ uint16_t range;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.options = options;
+ cmd_data.val = val;
+ cmd_data.range = range;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1) {
+ struct {
+ int32_t type = CMD_GRADIENT;
+ int16_t x0;
+ int16_t y0;
+ uint32_t rgb0;
+ int16_t x1;
+ int16_t y1;
+ uint32_t rgb1;
+ } cmd_data;
+
+ cmd_data.x0 = x0;
+ cmd_data.y0 = y0;
+ cmd_data.rgb0 = rgb0;
+ cmd_data.x1 = x1;
+ cmd_data.y1 = y1;
+ cmd_data.rgb1 = rgb1;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n) {
+ struct {
+ int32_t type = CMD_NUMBER;
+ int16_t x;
+ int16_t y;
+ int16_t font;
+ uint16_t options;
+ int16_t n;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.font = font;
+ cmd_data.options = options;
+ cmd_data.n = n;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::memzero (uint32_t ptr, uint32_t size) {
+ struct {
+ uint32_t type = CMD_MEMZERO;
+ uint32_t ptr;
+ uint32_t size;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.size = size;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::memset (uint32_t ptr, uint32_t val, uint32_t size) {
+ struct {
+ uint32_t type = CMD_MEMSET;
+ uint32_t ptr;
+ uint32_t val;
+ uint32_t size;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.val = val;
+ cmd_data.size = size;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::memcpy (uint32_t dst, uint32_t src, uint32_t size) {
+ struct {
+ uint32_t type = CMD_MEMCPY;
+ uint32_t dst;
+ uint32_t src;
+ uint32_t size;
+ } cmd_data;
+
+ cmd_data.dst = dst;
+ cmd_data.src = src;
+ cmd_data.size = size;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::memcrc (uint32_t ptr, uint32_t num, uint32_t result) {
+ struct {
+ uint32_t type = CMD_MEMCRC;
+ uint32_t ptr;
+ uint32_t num;
+ uint32_t result;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.num = num;
+ cmd_data.result = result;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::memwrite (uint32_t ptr, uint32_t value) {
+ struct {
+ uint32_t type = CMD_MEMWRITE;
+ uint32_t ptr;
+ uint32_t num;
+ uint32_t value;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.num = 4;
+ cmd_data.value = value;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::append (uint32_t ptr, uint32_t size) {
+ struct {
+ uint32_t type = CMD_APPEND;
+ uint32_t ptr;
+ uint32_t size;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.size = size;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::inflate (uint32_t ptr) {
+ struct {
+ uint32_t type = CMD_INFLATE;
+ uint32_t ptr;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::getptr (uint32_t result) {
+ struct {
+ uint32_t type = CMD_GETPTR;
+ uint32_t result;
+ } cmd_data;
+
+ cmd_data.result = result;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::track(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t tag) {
+ struct {
+ uint32_t type = CMD_TRACK;
+ int16_t x;
+ int16_t y;
+ int16_t w;
+ int16_t h;
+ int16_t tag;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.tag = tag;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::sketch(int16_t x, int16_t y, uint16_t w, uint16_t h, uint32_t ptr, uint16_t format) {
+ struct {
+ uint32_t type = CMD_SKETCH;
+ int16_t x;
+ int16_t y;
+ uint16_t w;
+ uint16_t h;
+ uint32_t ptr;
+ uint16_t format;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.ptr = ptr;
+ cmd_data.format = format;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::snapshot(uint32_t ptr) {
+ struct {
+ uint32_t type = CMD_SNAPSHOT;
+ uint32_t ptr;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::spinner(int16_t x, int16_t y, uint16_t style, uint16_t scale) {
+ struct {
+ uint32_t type = CMD_SPINNER;
+ uint16_t x;
+ uint16_t y;
+ uint16_t style;
+ uint16_t scale;
+ } cmd_data;
+
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.style = style;
+ cmd_data.scale = scale;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::loadimage(uint32_t ptr, uint32_t options) {
+ struct {
+ uint32_t type = CMD_LOADIMAGE;
+ uint32_t ptr;
+ uint32_t options;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.options = options;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::getprops (uint32_t ptr, uint32_t width, uint32_t height) {
+ struct {
+ uint32_t type = CMD_GETPROPS;
+ uint32_t ptr;
+ uint32_t width;
+ uint32_t height;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.width = width;
+ cmd_data.height = height;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::scale(int32_t sx, int32_t sy) {
+ struct {
+ uint32_t type = CMD_SCALE;
+ int32_t sx;
+ int32_t sy;
+ } cmd_data;
+
+ cmd_data.sx = sx;
+ cmd_data.sy = sy;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::rotate(int32_t a) {
+ struct {
+ uint32_t type = CMD_ROTATE;
+ int32_t a;
+ } cmd_data;
+
+ cmd_data.a = a;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+void CLCD::CommandFifo::translate (int32_t tx, int32_t ty) {
+ struct {
+ uint32_t type = CMD_TRANSLATE;
+ int32_t tx;
+ int32_t ty;
+ } cmd_data;
+
+ cmd_data.tx = tx;
+ cmd_data.ty = ty;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::setbase (uint8_t base) {
+ struct {
+ int32_t type = CMD_SETBASE;
+ uint32_t base;
+ } cmd_data;
+
+ cmd_data.base = base;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::setbitmap(uint32_t addr, uint16_t fmt, uint16_t w, uint16_t h) {
+ struct {
+ uint32_t type = CMD_SETBITMAP;
+ uint32_t addr;
+ uint16_t fmt;
+ uint16_t w;
+ uint16_t h;
+ uint16_t dummy;
+ } cmd_data;
+
+ cmd_data.addr = addr;
+ cmd_data.fmt = fmt;
+ cmd_data.w = w;
+ cmd_data.h = h;
+ cmd_data.dummy = 0;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::snapshot2(uint32_t format, uint32_t ptr, int16_t x, int16_t y, uint16_t w, uint16_t h) {
+ struct {
+ uint32_t type = CMD_SNAPSHOT2;
+ uint32_t format;
+ uint32_t ptr;
+ int16_t x;
+ int16_t y;
+ uint16_t w;
+ uint16_t h;
+ } cmd_data;
+
+ cmd_data.format = format;
+ cmd_data.ptr = ptr;
+ cmd_data.x = x;
+ cmd_data.y = y;
+ cmd_data.w = w;
+ cmd_data.h = h;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::mediafifo(uint32_t ptr, uint32_t size) {
+ struct {
+ uint32_t type = CMD_MEDIAFIFO;
+ uint32_t ptr;
+ uint32_t size;
+ } cmd_data;
+
+ cmd_data.ptr = ptr;
+ cmd_data.size = size;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::videostart() {
+ cmd( CMD_VIDEOSTART );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::videoframe(uint32_t dst, uint32_t ptr) {
+ struct {
+ uint32_t type = CMD_VIDEOFRAME;
+ uint32_t dst;
+ uint32_t ptr;
+ } cmd_data;
+
+ cmd_data.dst = dst;
+ cmd_data.ptr = ptr;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::playvideo(uint32_t options) {
+ struct {
+ uint32_t type = CMD_PLAYVIDEO;
+ uint32_t options;
+ } cmd_data;
+
+ cmd_data.options = options;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+#if FTDI_API_LEVEL >= 810
+void CLCD::CommandFifo::setrotate (uint8_t rotation) {
+ struct {
+ uint32_t type = CMD_SETROTATE;
+ uint32_t rotation;
+ } cmd_data;
+
+ cmd_data.rotation = rotation;
+
+ cmd( &cmd_data, sizeof(cmd_data) );
+}
+#endif
+
+/**************************** FT800/810 Co-Processor Command FIFO ****************************/
+
+bool CLCD::CommandFifo::is_processing() {
+ return (mem_read_32(REG::CMD_READ) & 0x0FFF) != (mem_read_32(REG::CMD_WRITE) & 0x0FFF);
+}
+
+bool CLCD::CommandFifo::has_fault() {
+ uint16_t Cmd_Read_Reg = mem_read_32(REG::CMD_READ) & 0x0FFF;
+ return Cmd_Read_Reg == 0x0FFF;
+}
+
+#if FTDI_API_LEVEL == 800
+void CLCD::CommandFifo::start() {
+ if (command_write_ptr == 0xFFFFFFFFul) {
+ command_write_ptr = mem_read_32(REG::CMD_WRITE) & 0x0FFF;
+ }
+}
+
+void CLCD::CommandFifo::execute() {
+ if (command_write_ptr != 0xFFFFFFFFul) {
+ mem_write_32(REG::CMD_WRITE, command_write_ptr);
+ }
+}
+
+void CLCD::CommandFifo::reset() {
+ safe_delay(100);
+ mem_write_32(REG::CPURESET, 0x00000001);
+ mem_write_32(REG::CMD_WRITE, 0x00000000);
+ mem_write_32(REG::CMD_READ, 0x00000000);
+ mem_write_32(REG::CPURESET, 0x00000000);
+ safe_delay(300);
+ command_write_ptr = 0xFFFFFFFFul;
+};
+
+template bool CLCD::CommandFifo::_write_unaligned(T data, uint16_t len) {
+ const char *ptr = (const char*)data;
+ uint32_t bytes_tail, bytes_head;
+ uint32_t command_read_ptr;
+
+ #ifdef UI_FRAMEWORK_DEBUG
+ if (command_write_ptr == 0xFFFFFFFFul) {
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Attempt to write to FIFO before CommandFifo::Cmd_Start().");
+ }
+ #endif
+
+ /* Wait until there is enough space in the circular buffer for the transfer */
+ do {
+ command_read_ptr = mem_read_32(REG::CMD_READ) & 0x0FFF;
+ if (command_read_ptr <= command_write_ptr) {
+ bytes_tail = 4096U - command_write_ptr;
+ bytes_head = command_read_ptr;
+ } else {
+ bytes_tail = command_read_ptr - command_write_ptr;
+ bytes_head = 0;
+ }
+ // Check for faults which can lock up the command processor
+ if (has_fault()) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHOLNPGM("Fault waiting for space in the command processor");
+ #endif
+ return false;
+ }
+ } while ((bytes_tail + bytes_head) < len);
+
+ /* Write as many bytes as possible following REG::CMD_WRITE */
+ uint16_t bytes_to_write = min(len, bytes_tail);
+ mem_write_bulk (MAP::RAM_CMD + command_write_ptr, T(ptr), bytes_to_write);
+ command_write_ptr += bytes_to_write;
+ ptr += bytes_to_write;
+ len -= bytes_to_write;
+
+ if (len > 0) {
+ /* Write remaining bytes at start of circular buffer */
+ mem_write_bulk (MAP::RAM_CMD, T(ptr), len);
+ command_write_ptr = len;
+ }
+
+ if (command_write_ptr == 4096U) {
+ command_write_ptr = 0;
+ }
+ return true;
+}
+
+// Writes len bytes into the FIFO, if len is not
+// divisible by four, zero bytes will be written
+// to align to the boundary.
+
+template bool CLCD::CommandFifo::write(T data, uint16_t len) {
+ const uint8_t padding = MULTIPLE_OF_4(len) - len;
+
+ uint8_t pad_bytes[] = {0, 0, 0, 0};
+ return _write_unaligned(data, len) &&
+ _write_unaligned(pad_bytes, padding);
+}
+#else
+void CLCD::CommandFifo::start() {
+}
+
+void CLCD::CommandFifo::execute() {
+}
+
+void CLCD::CommandFifo::reset() {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHOLNPGM("Resetting command processor");
+ #endif
+ safe_delay(100);
+ mem_write_32(REG::CPURESET, 0x00000001);
+ mem_write_32(REG::CMD_WRITE, 0x00000000);
+ mem_write_32(REG::CMD_READ, 0x00000000);
+ mem_write_32(REG::CPURESET, 0x00000000);
+ safe_delay(300);
+};
+
+// Writes len bytes into the FIFO, if len is not
+// divisible by four, zero bytes will be written
+// to align to the boundary.
+
+template bool CLCD::CommandFifo::write(T data, uint16_t len) {
+ const uint8_t padding = MULTIPLE_OF_4(len) - len;
+
+ if (has_fault()) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHOLNPGM("Faulted... ignoring write.");
+ #endif
+ return false;
+ }
+ // The FT810 provides a special register that can be used
+ // for writing data without us having to do our own FIFO
+ // management.
+ uint16_t Command_Space = mem_read_32(REG::CMDB_SPACE) & 0x0FFF;
+ if (Command_Space < (len + padding)) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Waiting for ", len + padding);
+ SERIAL_ECHOPAIR(" bytes in command queue, now free: ", Command_Space);
+ #endif
+ do {
+ Command_Space = mem_read_32(REG::CMDB_SPACE) & 0x0FFF;
+ if (has_fault()) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHOLNPGM("... fault");
+ #endif
+ return false;
+ }
+ } while (Command_Space < len + padding);
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHOLNPGM("... done");
+ #endif
+ }
+ mem_write_bulk(REG::CMDB_WRITE, data, len, padding);
+ return true;
+}
+#endif
+
+template bool CLCD::CommandFifo::write(const void*, uint16_t);
+template bool CLCD::CommandFifo::write(progmem_str, uint16_t);
+
+// CO_PROCESSOR COMMANDS
+
+void CLCD::CommandFifo::str (const char * data) {
+ write(data, strlen(data)+1);
+}
+
+void CLCD::CommandFifo::str (progmem_str data) {
+ write(data, strlen_P((const char*)data)+1);
+}
+
+/******************* LCD INITIALIZATION ************************/
+
+void CLCD::init (void) {
+ spi_init(); // Set Up I/O Lines for SPI and FT800/810 Control
+ ftdi_reset(); // Power down/up the FT8xx with the apropriate delays
+
+ if (Use_Crystal == 1) {
+ host_cmd(CLKEXT, 0);
+ }
+ else {
+ host_cmd(CLKINT, 0);
+ }
+
+ host_cmd(ACTIVE, 0); // Activate the System Clock
+
+ /* read the device-id until it returns 0x7c or times out, should take less than 150ms */
+ uint8_t counter;
+ for(counter = 0; counter < 250; counter++) {
+ uint8_t device_id = mem_read_8(REG::ID); // Read Device ID, Should Be 0x7C;
+ if (device_id == 0x7c) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("FTDI chip initialized ");
+ #endif
+ break;
+ }
+ else {
+ delay(1);
+ }
+ if (counter == 249) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPAIR("Timeout waiting for device ID, should be 124, got ", device_id);
+ #endif
+ }
+ }
+
+ mem_write_8(REG::PWM_DUTY, 0); // turn off Backlight, Frequency already is set to 250Hz default
+
+ /* Configure the FT8xx Registers */
+ mem_write_16(REG::HCYCLE, FTDI::Hcycle);
+ mem_write_16(REG::HOFFSET, FTDI::Hoffset);
+ mem_write_16(REG::HSYNC0, FTDI::Hsync0);
+ mem_write_16(REG::HSYNC1, FTDI::Hsync1);
+ mem_write_16(REG::VCYCLE, FTDI::Vcycle);
+ mem_write_16(REG::VOFFSET, FTDI::Voffset);
+ mem_write_16(REG::VSYNC0, FTDI::Vsync0);
+ mem_write_16(REG::VSYNC1, FTDI::Vsync1);
+ mem_write_16(REG::HSIZE, FTDI::Hsize);
+ mem_write_16(REG::VSIZE, FTDI::Vsize);
+ mem_write_8(REG::SWIZZLE, FTDI::Swizzle);
+ mem_write_8(REG::PCLK_POL, FTDI::Pclkpol);
+ mem_write_8(REG::CSPREAD, FTDI::CSpread);
+
+ /* write a basic display-list to get things started */
+ mem_write_32(MAP::RAM_DL, DL::CLEAR_COLOR_RGB);
+ mem_write_32(MAP::RAM_DL + 4, (DL::CLEAR | 0x07)); /* clear color, stencil and tag buffer */
+ mem_write_32(MAP::RAM_DL + 8, DL::DL_DISPLAY); /* end of display list */
+
+ mem_write_8(REG::DLSWAP, 0x02); // activate display list, Bad Magic Cookie 2 = switch to new list after current frame is scanned out
+
+ //mem_write_8(REG::TOUCH_MODE, 0x03); // Configure the Touch Screen, Bad Magic Cookie, 3 = CONTINUOUS = Reset Default
+ //mem_write_8(REG::TOUCH_ADC_MODE, 0x01); // Bad Magic Cookie, 1 = single touch = Reset Default
+ //mem_write_8(REG::TOUCH_OVERSAMPLE, 0x0F); // Reset Default = 7 - why 15?
+ mem_write_16(REG::TOUCH_RZTHRESH, touch_threshold); /* setup touch sensitivity */
+ mem_write_8(REG::VOL_SOUND, 0x00); // Turn Synthesizer Volume Off
+
+ /* turn on the display by setting DISP high */
+ /* turn on the Audio Amplifier by setting GPIO_1 high for the select few modules supporting this */
+ /* no need to use GPIOX here since DISP/GPIO_0 and GPIO_1 are on REG::GPIO for FT81x as well */
+ if (GPIO_1_Audio_Shutdown) {
+ mem_write_8(REG::GPIO_DIR, GPIO_DISP | GPIO_GP1);
+ mem_write_8(REG::GPIO, GPIO_DISP | GPIO_GP1);
+ } else if (GPIO_0_Audio_Enable) {
+ mem_write_8(REG::GPIO_DIR, GPIO_DISP | GPIO_GP0);
+ mem_write_8(REG::GPIO, GPIO_DISP | GPIO_GP0);
+ }
+ else {
+ mem_write_8(REG::GPIO, GPIO_DISP); /* REG::GPIO_DIR is set to output for GPIO_DISP by default */
+ }
+
+ mem_write_8(REG::PCLK, Pclk); // Turns on Clock by setting PCLK Register to the value necessary for the module
+
+ mem_write_16(REG::PWM_HZ, 0x00FA);
+
+ // Turning off dithering seems to help prevent horizontal line artifacts on certain colors
+ mem_write_8(REG::DITHER, 0);
+
+ // Initialize the command FIFO
+ CommandFifo::reset();
+
+ default_touch_transform();
+ default_display_orientation();
+}
+
+void CLCD::default_touch_transform() {
+ // Set Initial Values for Touch Transform Registers
+ mem_write_32(REG::ROTATE, 0);
+ mem_write_32(REG::TOUCH_TRANSFORM_A, FTDI::default_transform_a);
+ mem_write_32(REG::TOUCH_TRANSFORM_B, FTDI::default_transform_b);
+ mem_write_32(REG::TOUCH_TRANSFORM_C, FTDI::default_transform_c);
+ mem_write_32(REG::TOUCH_TRANSFORM_D, FTDI::default_transform_d);
+ mem_write_32(REG::TOUCH_TRANSFORM_E, FTDI::default_transform_e);
+ mem_write_32(REG::TOUCH_TRANSFORM_F, FTDI::default_transform_f);
+}
+
+void CLCD::default_display_orientation() {
+ #if FTDI_API_LEVEL >= 810
+ // Set the initial display orientation. On the FT810, we use the command
+ // processor to do this since it will also update the transform matrices.
+ if (FTDI::ftdi_chip >= 810) {
+ CommandFifo cmd;
+ cmd.setrotate(0
+ #if ENABLED(TOUCH_UI_MIRRORED)
+ + 4
+ #endif
+ #if ENABLED(TOUCH_UI_PORTRAIT)
+ + 2
+ #endif
+ #if ENABLED(TOUCH_UI_INVERTED)
+ + 1
+ #endif
+ );
+ cmd.execute();
+ }
+ else {
+ #ifdef TOUCH_UI_INVERTED
+ mem_write_32(REG::ROTATE, 1);
+ #endif
+ }
+ #elif ANY(TOUCH_UI_PORTRAIT, TOUCH_UI_MIRRORED)
+ #error PORTRAIT or MIRRORED orientation not supported on the FT800
+ #elif ENABLED(TOUCH_UI_INVERTED)
+ mem_write_32(REG::ROTATE, 1);
+ #endif
+}
+
+#endif // FTDI_BASIC
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.h
new file mode 100644
index 0000000000..f78dd45769
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/commands.h
@@ -0,0 +1,258 @@
+/****************
+ * commands.cpp *
+ ****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+ /****************************************************************************
+ * FUNCTION MAP *
+ * *
+ * SPI and FT800/810 Commands *
+ * *
+ * CLCD::spi_select() Set CS line to 0 *
+ * CLCD::spi_deselect() Set CS Line to 1 *
+ * CLCD::reset() Toggle FT800/810 Power Down Line 50 ms *
+ * CLCD::spi_init() Configure I/O Lines for SPI *
+ * CLCD::spi_transfer() Send/Receive 1 SPI Byte *
+ * CLCD::init() Set FT800/810 Registers *
+ * CLCD::enable() Turn On FT800/810 PCLK *
+ * CLCD::disable() Turn Off FT8880/810 PCLK *
+ * CLCD::set_backlight() Set LCD Backlight Level *
+ * *
+ * MEMORY READ FUNCTIONS *
+ * *
+ * CLCD::mem_read_addr() Send 32-Bit Address *
+ * CLCD::mem_read_8() Read 1 Byte *
+ * CLCD::mem_read_16() Read 2 Bytes *
+ * CLCD::mem_read_32() Read 4 Bytes *
+ * *
+ * MEMORY WRITE FUNCTIONS *
+ * *
+ * CLCD::mem_write_addr() Send 24-Bit Address *
+ * CLCD::mem_write_8() Write 1 Byte *
+ * CLCD::mem_write_16() Write 2 Bytes *
+ * CLCD::mem_write_32() Write 4 Bytes *
+ * *
+ * HOST COMMAND FUNCTION *
+ * *
+ * CLCD::host_cmd() Send 24-Bit Host Command *
+ * *
+ * COMMAND BUFFER FUNCTIONS *
+ * *
+ * CLCD::cmd() Send 32-Bit Value(4 Bytes)CMD Buffer *
+ * CLCD::cmd() Send Data Structure with 32-Bit Cmd *
+ * CLCD::str() Send Text String in 32-Bit Multiples *
+
+ * *
+ * FT800/810 GRAPHIC COMMANDS *
+ * *
+ * class CLCD:CommandFifo {} Class to control Cmd FIFO *
+
+ * CommandFifo::start() Wait for CP finish - Set FIFO Ptr *
+ * CommandFifo::execute() Set REG_CMD_WRITE and start CP *
+ * CommandFifo::reset() Set Cmd Buffer Pointers to 0 *
+ *
+ * CommandFifo::fgcolor Set Graphic Item Foreground Color *
+ * CommandFifo::bgcolor Set Graphic Item Background Color *
+ * CommandFifo::begin() Begin Drawing a Primative *
+ * CommandFifo::mem_copy() Copy a Block of Memory *
+ * CommandFifo::append() Append Commands to Current DL *
+ * CommandFifo::gradient_color() Set 3D Button Highlight Color *
+ * CommandFifo::button() Draw Button with Bulk Write *
+ * CommandFifo::text() Draw Text with Bulk Write *
+ *****************************************************************************/
+
+ /**************************************************
+ * RAM_G Graphics RAM Allocation *
+ * *
+ * Address Use *
+ * *
+ * 8000 Extruder Bitmap *
+ * 8100 Bed Heat Bitmap *
+ * 8200 Fan Bitmap *
+ * 8300 Thumb Drive Symbol Bitmap *
+ * 35000 Static DL Space (FT800) *
+ * F5000 Static DL Space (FT810) *
+ **************************************************/
+
+#pragma once
+
+typedef const __FlashStringHelper *progmem_str;
+
+class UIStorage;
+
+class CLCD {
+ friend class UIStorage;
+
+ public:
+ typedef FTDI::ftdi_registers REG;
+ typedef FTDI::ftdi_memory_map MAP;
+
+ static void spi_write_addr (uint32_t reg_address);
+ static void spi_read_addr (uint32_t reg_address);
+
+ static uint8_t mem_read_8 (uint32_t reg_address);
+ static uint16_t mem_read_16 (uint32_t reg_address);
+ static uint32_t mem_read_32 (uint32_t reg_address);
+ static void mem_read_bulk (uint32_t reg_address, uint8_t *data, uint16_t len);
+
+ static void mem_write_8 (uint32_t reg_address, uint8_t w_data);
+ static void mem_write_16 (uint32_t reg_address, uint16_t w_data);
+ static void mem_write_32 (uint32_t reg_address, uint32_t w_data);
+ static void mem_write_bulk (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding = 0);
+ static void mem_write_pgm (uint32_t reg_address, const void *data, uint16_t len, uint8_t padding = 0);
+ static void mem_write_bulk (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding = 0);
+ static void mem_write_xbm (uint32_t reg_address, progmem_str str, uint16_t len, uint8_t padding = 0);
+
+ public:
+ class CommandFifo;
+ class FontMetrics;
+
+ static void init (void);
+ static void default_touch_transform (void);
+ static void default_display_orientation (void);
+ static void turn_on_backlight (void);
+ static void enable (void);
+ static void disable (void);
+ static void set_brightness (uint8_t brightness);
+ static uint8_t get_brightness();
+ static void host_cmd (unsigned char host_command, unsigned char byte2);
+
+ static void get_font_metrics (uint8_t font, struct FontMetrics &fm);
+ static uint16_t get_text_width(const uint8_t font, const char *str);
+ static uint16_t get_text_width_P(const uint8_t font, const char *str);
+
+ static uint8_t get_tag () {return mem_read_8(REG::TOUCH_TAG);}
+ static bool is_touching () {return (mem_read_32(REG::TOUCH_DIRECT_XY) & 0x80000000) == 0;}
+
+ static uint8_t get_tracker (uint16_t &value) {
+ uint32_t tracker = mem_read_32(REG::TRACKER);
+ value = tracker >> 16;
+ return tracker & 0xFF;
+ }
+};
+
+/*************************** FT800/810 Font Metrics ****************************/
+
+class CLCD::FontMetrics {
+ public:
+ uint8_t char_widths[128];
+ uint32_t format;
+ uint32_t stride;
+ uint32_t width;
+ uint32_t height;
+ uint32_t ptr;
+
+ FontMetrics(uint8_t font) {load(font);}
+
+ void load(uint8_t font);
+
+ // Returns width of string, up to a maximum of n characters.
+ uint16_t get_text_width(const char *str, size_t n = SIZE_MAX) const;
+ uint16_t get_text_width_P(const char *str, size_t n = SIZE_MAX) const;
+};
+
+/******************* FT800/810 Graphic Commands *********************************/
+
+class CLCD::CommandFifo {
+ protected:
+ #if FTDI_API_LEVEL >= 810
+ uint32_t getRegCmdBSpace();
+ #else
+ static uint32_t command_write_ptr;
+ template bool _write_unaligned(T data, uint16_t len);
+ #endif
+ void start(void);
+
+ public:
+ template bool write(T data, uint16_t len);
+
+ public:
+ CommandFifo() {start();}
+
+ static void reset (void);
+ static bool is_processing();
+ static bool has_fault();
+
+ void execute(void);
+
+ void cmd(uint32_t cmd32);
+ void cmd(void* data, uint16_t len);
+
+ void dlstart() {cmd(FTDI::CMD_DLSTART);}
+ void swap() {cmd(FTDI::CMD_SWAP);}
+ void coldstart() {cmd(FTDI::CMD_COLDSTART);}
+ void screensaver() {cmd(FTDI::CMD_SCREENSAVER);}
+ void stop() {cmd(FTDI::CMD_STOP);}
+ void loadidentity() {cmd(FTDI::CMD_LOADIDENTITY);}
+ void setmatrix() {cmd(FTDI::CMD_SETMATRIX);}
+
+ void fgcolor (uint32_t rgb);
+ void bgcolor (uint32_t rgb);
+ void gradcolor (uint32_t rgb);
+
+ void track (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t tag);
+ void clock (int16_t x, int16_t y, int16_t r, uint16_t options, int16_t h, int16_t m, int16_t s, int16_t ms);
+ void gauge (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t major, uint16_t minor, uint16_t val, uint16_t range);
+ void dial (int16_t x, int16_t y, int16_t r, uint16_t options, uint16_t val);
+ void slider (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range);
+ void progress (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t range);
+ void scrollbar (int16_t x, int16_t y, int16_t w, int16_t h, uint16_t options, uint16_t val, uint16_t size, uint16_t range);
+ void number (int16_t x, int16_t y, int16_t font, uint16_t options, int32_t n);
+ void spinner (int16_t x, int16_t y, uint16_t style, uint16_t scale);
+ void sketch (int16_t x, int16_t y, uint16_t w, uint16_t h, uint32_t ptr, uint16_t format);
+ void gradient (int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1);
+ void snapshot (uint32_t ptr);
+ void loadimage (uint32_t ptr, uint32_t options);
+ void getprops (uint32_t ptr, uint32_t width, uint32_t height);
+
+ void scale (int32_t sx, int32_t sy);
+ void rotate (int32_t a);
+ void translate (int32_t tx, int32_t ty);
+
+ #if FTDI_API_LEVEL >= 810
+ void setbase (uint8_t base);
+ void setrotate (uint8_t rotation);
+ void setbitmap (uint32_t ptr, uint16_t fmt, uint16_t w, uint16_t h);
+ void snapshot2 (uint32_t fmt, uint32_t ptr, int16_t x, int16_t y, uint16_t w, uint16_t h);
+ void mediafifo (uint32_t ptr, uint32_t size);
+ void playvideo (uint32_t options);
+ void videostart();
+ void videoframe(uint32_t dst, uint32_t ptr);
+ #endif
+
+ // All the following must be followed by str()
+ void text (int16_t x, int16_t y, int16_t font, uint16_t options);
+ void button (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t option);
+ void toggle (int16_t x, int16_t y, int16_t w, int16_t font, uint16_t options, bool state);
+ void keys (int16_t x, int16_t y, int16_t w, int16_t h, int16_t font, uint16_t options);
+
+ // Sends the string portion of text, button, toggle and keys.
+ void str (const char * data);
+ void str (progmem_str data);
+
+ void memzero (uint32_t ptr, uint32_t size);
+ void memset (uint32_t ptr, uint32_t value, uint32_t size);
+ void memcpy (uint32_t dst, uint32_t src, uint32_t size);
+ void memcrc (uint32_t ptr, uint32_t num, uint32_t result);
+ void memwrite (uint32_t ptr, uint32_t value);
+ void inflate (uint32_t ptr);
+ void getptr (uint32_t result);
+ void append (uint32_t ptr, uint32_t size);
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/constants.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/constants.h
new file mode 100644
index 0000000000..d8a0a20c07
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/constants.h
@@ -0,0 +1,411 @@
+/***************
+ * constants.h *
+ ***************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/****************************************************************************
+ * This header defines constants and commands for the FTDI FT810 LCD Driver *
+ * chip. *
+ ****************************************************************************/
+
+#pragma once
+
+// OPTIONS
+
+namespace FTDI {
+ constexpr uint16_t OPT_3D = 0x0000;
+ constexpr uint16_t OPT_RGB565 = 0x0000;
+ constexpr uint16_t OPT_MONO = 0x0001;
+ constexpr uint16_t OPT_NODL = 0x0002;
+ constexpr uint16_t OPT_FLAT = 0x0100;
+ constexpr uint16_t OPT_SIGNED = 0x0100;
+ constexpr uint16_t OPT_CENTERX = 0x0200;
+ constexpr uint16_t OPT_CENTERY = 0x0400;
+ constexpr uint16_t OPT_CENTER = (OPT_CENTERX | OPT_CENTERY);
+ constexpr uint16_t OPT_RIGHTX = 0x0800;
+ constexpr uint16_t OPT_NOBACK = 0x1000;
+ constexpr uint16_t OPT_NOTICKS = 0x2000;
+ constexpr uint16_t OPT_NOHM = 0x4000;
+ constexpr uint16_t OPT_NOPOINTER = 0x4000;
+ constexpr uint16_t OPT_NOSECS = 0x8000;
+ constexpr uint16_t OPT_NOHANDS = (OPT_NOPOINTER | OPT_NOSECS);
+}
+
+namespace FTDI_FT810 {
+ constexpr uint16_t OPT_NOTEAR = 0x0004;
+ constexpr uint16_t OPT_FULLSCREEN = 0x0008;
+ constexpr uint16_t OPT_MEDIAFIFO = 0x0010;
+ constexpr uint16_t OPT_SOUND = 0x0020;
+}
+
+// GPIO Bits
+
+namespace FTDI {
+ constexpr uint8_t GPIO_GP0 = 1 << 0;
+ constexpr uint8_t GPIO_GP1 = 1 << 1;
+ constexpr uint8_t GPIO_DISP = 1 << 7;
+}
+
+namespace FTDI_FT810 {
+ constexpr uint16_t GPIOX_GP0 = 1 << 0;
+ constexpr uint16_t GPIOX_GP1 = 1 << 1;
+ constexpr uint16_t GPIOX_DISP = 1 << 15;
+}
+
+// HOST COMMANDS
+
+namespace FTDI {
+ constexpr uint8_t ACTIVE = 0x00;
+ constexpr uint8_t STANDBY = 0x41;
+ constexpr uint8_t SLEEP = 0x42;
+ constexpr uint8_t PWRDOWN = 0x50;
+ constexpr uint8_t CLKEXT = 0x44;
+ constexpr uint8_t CLKINT = 0x48;
+ constexpr uint8_t CORESET = 0x68;
+}
+
+namespace FTDI_FT800 {
+ constexpr uint8_t CLK48M = 0x62;
+ constexpr uint8_t CLK36M = 0x61;
+}
+
+namespace FTDI_FT810 {
+ constexpr uint8_t CLKSEL = 0x61;
+}
+
+// DISPLAY LIST COMMANDS
+
+namespace FTDI {
+ constexpr uint8_t ARGB1555 = 0;
+ constexpr uint8_t L1 = 1;
+ constexpr uint8_t L4 = 2;
+ constexpr uint8_t L8 = 3;
+ constexpr uint8_t RGB332 = 4;
+ constexpr uint8_t ARGB2 = 5;
+ constexpr uint8_t ARGB4 = 6;
+ constexpr uint8_t RGB565 = 7;
+ constexpr uint8_t PALETTED = 8;
+ constexpr uint8_t TEXT8X8 = 9;
+ constexpr uint8_t TEXTVGA = 10;
+ constexpr uint8_t BARGRAPH = 11;
+
+ constexpr uint8_t ALPHA_FUNC_NEVER = 0;
+ constexpr uint8_t ALPHA_FUNC_LESS = 1;
+ constexpr uint8_t ALPHA_FUNC_LEQUAL = 2;
+ constexpr uint8_t ALPHA_FUNC_GREATER = 3;
+ constexpr uint8_t ALPHA_FUNC_GEQUAL = 4;
+ constexpr uint8_t ALPHA_FUNC_EQUAL = 5;
+ constexpr uint8_t ALPHA_FUNC_NOTEQUAL = 6;
+ constexpr uint8_t ALPHA_FUNC_ALWAYS = 7;
+
+ constexpr uint8_t NEAREST = 0;
+ constexpr uint8_t BILINEAR = 1;
+ constexpr uint8_t BORDER = 0;
+ constexpr uint8_t REPEAT = 1;
+
+ constexpr uint8_t BLEND_FUNC_ZERO = 0;
+ constexpr uint8_t BLEND_FUNC_ONE = 1;
+ constexpr uint8_t BLEND_FUNC_SRC_ALPHA = 2;
+ constexpr uint8_t BLEND_FUNC_DST_ALPHA = 3;
+ constexpr uint8_t BLEND_FUNC_ONE_MINUS_SRC_ALPHA = 4;
+ constexpr uint8_t BLEND_FUNC_ONE_MINUS_DST_ALPHA = 5;
+
+ constexpr uint32_t COLOR_MASK_RED = 8;
+ constexpr uint32_t COLOR_MASK_GRN = 4;
+ constexpr uint32_t COLOR_MASK_BLU = 2;
+ constexpr uint32_t COLOR_MASK_ALPHA = 1;
+
+ constexpr uint8_t STENCIL_FUNC_NEVER = 0;
+ constexpr uint8_t STENCIL_FUNC_LESS = 1;
+ constexpr uint8_t STENCIL_FUNC_LEQUAL = 2;
+ constexpr uint8_t STENCIL_FUNC_GREATER = 3;
+ constexpr uint8_t STENCIL_FUNC_GEQUAL = 4;
+ constexpr uint8_t STENCIL_FUNC_EQUAL = 5;
+ constexpr uint8_t STENCIL_FUNC_NOTEQUAL = 6;
+ constexpr uint8_t STENCIL_FUNC_ALWAYS = 7;
+
+ constexpr uint8_t STENCIL_OP_ZERO = 0;
+ constexpr uint8_t STENCIL_OP_KEEP = 1;
+ constexpr uint8_t STENCIL_OP_REPLACE = 2;
+ constexpr uint8_t STENCIL_OP_INCR = 3;
+ constexpr uint8_t STENCIL_OP_DECR = 4;
+ constexpr uint8_t STENCIL_OP_INVERT = 5;
+
+ typedef enum: uint32_t {
+ BITMAPS = 1,
+ POINTS = 2,
+ LINES = 3,
+ LINE_STRIP = 4,
+ EDGE_STRIP_R = 5,
+ EDGE_STRIP_L = 6,
+ EDGE_STRIP_A = 7,
+ EDGE_STRIP_B = 8,
+ RECTS = 9
+ } begin_t;
+}
+
+namespace FTDI_FT800_DL {
+ constexpr uint32_t ALPHA_FUNC = 0x09000000;
+ constexpr uint32_t BEGIN = 0x1F000000;
+ constexpr uint32_t BITMAP_HANDLE = 0x05000000;
+ constexpr uint32_t BITMAP_LAYOUT = 0x07000000;
+ constexpr uint32_t BITMAP_SIZE = 0x08000000;
+ constexpr uint32_t BITMAP_SOURCE = 0x01000000;
+ constexpr uint32_t BITMAP_TRANSFORM_A = 0x15000000;
+ constexpr uint32_t BITMAP_TRANSFORM_B = 0x16000000;
+ constexpr uint32_t BITMAP_TRANSFORM_C = 0x17000000;
+ constexpr uint32_t BITMAP_TRANSFORM_D = 0x18000000;
+ constexpr uint32_t BITMAP_TRANSFORM_E = 0x19000000;
+ constexpr uint32_t BITMAP_TRANSFORM_F = 0x1A000000;
+ constexpr uint32_t BLEND_FUNC = 0x0B000000;
+ constexpr uint32_t CALL = 0x1D000000;
+ constexpr uint32_t CELL = 0x06000000;
+ constexpr uint32_t CLEAR = 0x26000000;
+ constexpr uint32_t CLEAR_COLOR_BUFFER = 0x00000004;
+ constexpr uint32_t CLEAR_STENCIL_BUFFER = 0x00000002;
+ constexpr uint32_t CLEAR_TAG_BUFFER = 0x00000001;
+ constexpr uint32_t CLEAR_COLOR_A = 0x0F000000;
+ constexpr uint32_t CLEAR_COLOR_RGB = 0x02000000;
+ constexpr uint32_t CLEAR_STENCIL = 0x11000000;
+ constexpr uint32_t CLEAR_TAG = 0x12000000;
+ constexpr uint32_t COLOR_A = 0x10000000;
+ constexpr uint32_t COLOR_MASK = 0x20000000;
+ constexpr uint32_t COLOR_RGB = 0x04000000;
+ constexpr uint32_t DL_DISPLAY = 0x00000000;
+ constexpr uint32_t END = 0x21000000;
+ constexpr uint32_t JUMP = 0x1E000000;
+ constexpr uint32_t LINE_WIDTH = 0x0E000000;
+ constexpr uint32_t MACRO = 0x25000000;
+ constexpr uint32_t POINT_SIZE = 0x0D000000;
+ constexpr uint32_t RESTORE_CONTEXT = 0x23000000;
+ constexpr uint32_t RETURN = 0x24000000;
+ constexpr uint32_t SAVE_CONTEXT = 0x22000000;
+ constexpr uint32_t SCISSOR_SIZE = 0x1C000000;
+ constexpr uint32_t SCISSOR_XY = 0x1B000000;
+ constexpr uint32_t STENCIL_FUNC = 0x0A000000;
+ constexpr uint32_t STENCIL_MASK = 0x13000000;
+ constexpr uint32_t STENCIL_OP = 0x0C000000;
+ constexpr uint32_t TAG = 0x03000000;
+ constexpr uint32_t TAG_MASK = 0x14000000;
+ constexpr uint32_t VERTEX2F = 0x40000000;
+ constexpr uint32_t VERTEX2II = 0x80000000;
+}
+
+namespace FTDI_FT810_DL {
+ constexpr uint32_t NOP = 0x25000000;
+ constexpr uint32_t BITMAP_LAYOUT_H = 0x28000000;
+ constexpr uint32_t BITMAP_SIZE_H = 0x29000000;
+ constexpr uint32_t VERTEX_FORMAT = 0x27000000;
+ constexpr uint32_t VERTEX_TRANSLATE_X = 0x2B000000;
+ constexpr uint32_t VERTEX_TRANSLATE_Y = 0x2C000000;
+}
+
+// CO-PROCESSOR ENGINE COMMANDS
+namespace FTDI {
+ constexpr uint32_t CMD_DLSTART = 0xFFFFFF00;
+ constexpr uint32_t CMD_SWAP = 0xFFFFFF01;
+ constexpr uint32_t CMD_COLDSTART = 0xFFFFFF32;
+ constexpr uint32_t CMD_INTERRUPT = 0xFFFFFF02;
+ constexpr uint32_t CMD_APPEND = 0xFFFFFF1E;
+ constexpr uint32_t CMD_REGREAD = 0xFFFFFF19;
+ constexpr uint32_t CMD_MEMWRITE = 0xFFFFFF1A;
+ constexpr uint32_t CMD_INFLATE = 0xFFFFFF22;
+ constexpr uint32_t CMD_LOADIMAGE = 0xFFFFFF24;
+ constexpr uint32_t CMD_MEMCRC = 0xFFFFFF18;
+ constexpr uint32_t CMD_MEMZERO = 0xFFFFFF1C;
+ constexpr uint32_t CMD_MEMSET = 0xFFFFFF1B;
+ constexpr uint32_t CMD_MEMCPY = 0xFFFFFF1D;
+ constexpr uint32_t CMD_BUTTON = 0xFFFFFF0D;
+ constexpr uint32_t CMD_CLOCK = 0xFFFFFF14;
+ constexpr uint32_t CMD_FGCOLOR = 0xFFFFFF0A;
+ constexpr uint32_t CMD_BGCOLOR = 0xFFFFFF09;
+ constexpr uint32_t CMD_GRADCOLOR = 0xFFFFFF34;
+ constexpr uint32_t CMD_GAUGE = 0xFFFFFF13;
+ constexpr uint32_t CMD_GRADIENT = 0xFFFFFF0B;
+ constexpr uint32_t CMD_KEYS = 0xFFFFFF0E;
+ constexpr uint32_t CMD_PROGRESS = 0xFFFFFF0F;
+ constexpr uint32_t CMD_SCROLLBAR = 0xFFFFFF11;
+ constexpr uint32_t CMD_SLIDER = 0xFFFFFF10;
+ constexpr uint32_t CMD_DIAL = 0xFFFFFF2D;
+ constexpr uint32_t CMD_TOGGLE = 0xFFFFFF12;
+ constexpr uint32_t CMD_TEXT = 0xFFFFFF0C;
+ constexpr uint32_t CMD_NUMBER = 0xFFFFFF2E;
+ constexpr uint32_t CMD_LOADIDENTITY = 0xFFFFFF26;
+ constexpr uint32_t CMD_SETMATRIX = 0xFFFFFF2A;
+ constexpr uint32_t CMD_GETMATRIX = 0xFFFFFF33;
+ constexpr uint32_t CMD_GETPTR = 0xFFFFFF23;
+ constexpr uint32_t CMD_GETPROPS = 0xFFFFFF25;
+ constexpr uint32_t CMD_SCALE = 0xFFFFFF28;
+ constexpr uint32_t CMD_ROTATE = 0xFFFFFF29;
+ constexpr uint32_t CMD_TRANSLATE = 0xFFFFFF27;
+ constexpr uint32_t CMD_CALIBRATE = 0xFFFFFF15;
+ constexpr uint32_t CMD_SPINNER = 0xFFFFFF16;
+ constexpr uint32_t CMD_SCREENSAVER = 0xFFFFFF2F;
+ constexpr uint32_t CMD_SKETCH = 0xFFFFFF30;
+ constexpr uint32_t CMD_STOP = 0xFFFFFF17;
+ constexpr uint32_t CMD_SETFONT = 0xFFFFFF2B;
+ constexpr uint32_t CMD_TRACK = 0xFFFFFF2C;
+ constexpr uint32_t CMD_SNAPSHOT = 0xFFFFFF1F;
+ constexpr uint32_t CMD_LOGO = 0xFFFFFF31;
+}
+
+namespace FTDI_FT810 {
+ constexpr uint32_t CMD_SETROTATE = 0xFFFFFF36;
+ constexpr uint32_t CMD_SNAPSHOT2 = 0xFFFFFF37;
+ constexpr uint32_t CMD_SETBASE = 0xFFFFFF38;
+ constexpr uint32_t CMD_MEDIAFIFO = 0xFFFFFF39;
+ constexpr uint32_t CMD_PLAYVIDEO = 0xFFFFFF3A;
+ constexpr uint32_t CMD_VIDEOSTART = 0xFFFFFF40;
+ constexpr uint32_t CMD_VIDEOFRAME = 0xFFFFFF41;
+ constexpr uint32_t CMD_SETBITMAP = 0xFFFFFF43;
+}
+
+namespace FTDI {
+ enum effect_t {
+ SILENCE = 0x00,
+ SQUARE_WAVE = 0x01,
+ SINE_WAVE = 0x02,
+ SAWTOOTH_WAVE = 0x03,
+ TRIANGLE_WAVE = 0x04,
+ BEEPING = 0x05,
+ ALARM = 0x06,
+ WARBLE = 0x07,
+ CAROUSEL = 0x08,
+ SHORT_PIPS_1 = 0x10,
+ SHORT_PIPS_2 = 0x11,
+ SHORT_PIPS_3 = 0x12,
+ SHORT_PIPS_4 = 0x13,
+ SHORT_PIPS_5 = 0x14,
+ SHORT_PIPS_6 = 0x15,
+ SHORT_PIPS_7 = 0x16,
+ SHORT_PIPS_8 = 0x17,
+ SHORT_PIPS_9 = 0x18,
+ SHORT_PIPS_10 = 0x19,
+ SHORT_PIPS_11 = 0x1A,
+ SHORT_PIPS_12 = 0x1B,
+ SHORT_PIPS_13 = 0x1C,
+ SHORT_PIPS_14 = 0x1D,
+ SHORT_PIPS_15 = 0x1E,
+ SHORT_PIPS_16 = 0x1F,
+ DTMF_POUND = 0x23,
+ DTMF_STAR = 0x2C,
+ DTMF_0 = 0x30,
+ DTMF_1 = 0x31,
+ DTMF_2 = 0x32,
+ DTMF_3 = 0x33,
+ DTMF_4 = 0x34,
+ DTMF_5 = 0x35,
+ DTMF_6 = 0x36,
+ DTMF_7 = 0x37,
+ DTMF_8 = 0x38,
+ DTMF_9 = 0x39,
+ HARP = 0x40,
+ XYLOPHONE = 0x41,
+ TUBA = 0x42,
+ GLOCKENSPIEL = 0x43,
+ ORGAN = 0x44,
+ TRUMPET = 0x45,
+ PIANO = 0x46,
+ CHIMES = 0x47,
+ MUSIC_BOX = 0x48,
+ BELL = 0x49,
+ CLICK = 0x50,
+ SWITCH = 0x51,
+ COWBELL = 0x52,
+ NOTCH = 0x53,
+ HIHAT = 0x54,
+ KICKDRUM = 0x55,
+ POP = 0x56,
+ CLACK = 0x57,
+ CHACK = 0x58,
+ MUTE = 0x60,
+ UNMUTE = 0x61
+ };
+
+ enum note_t {
+ END_SONG = 0xFF,
+ REST = 0x00,
+
+ NOTE_C1 = 0x18, // 24
+ NOTE_C1S = 0x19,
+ NOTE_D1 = 0x1A,
+ NOTE_D1S = 0x1B,
+ NOTE_E1 = 0x1C,
+ NOTE_F1 = 0x1D,
+ NOTE_F1S = 0x1E,
+ NOTE_G1 = 0x1F,
+ NOTE_G1S = 0x20,
+ NOTE_A1 = 0x21,
+ NOTE_A1S = 0x22,
+ NOTE_B1 = 0x23,
+
+ NOTE_C2 = 0x24, //36
+ NOTE_C2S = 0x25,
+ NOTE_D2 = 0x26,
+ NOTE_D2S = 0x27,
+ NOTE_E2 = 0x28,
+ NOTE_F2 = 0x29,
+ NOTE_F2S = 0x2A,
+ NOTE_G2 = 0x2B,
+ NOTE_G2S = 0x2C,
+ NOTE_A2 = 0x2D,
+ NOTE_A2S = 0x2E,
+ NOTE_B2 = 0x2F,
+
+ NOTE_C3 = 0x30,
+ NOTE_C3S = 0x31,
+ NOTE_D3 = 0x32,
+ NOTE_D3S = 0x33,
+ NOTE_E3 = 0x34,
+ NOTE_F3 = 0x35,
+ NOTE_F3S = 0x36,
+ NOTE_G3 = 0x37,
+ NOTE_G3S = 0x38,
+ NOTE_A3 = 0x39,
+ NOTE_A3S = 0x3A,
+ NOTE_B3 = 0x3B,
+
+ NOTE_C4 = 0x3C,
+ NOTE_C4S = 0x3D,
+ NOTE_D4 = 0x3E,
+ NOTE_D4S = 0x3F,
+ NOTE_E4 = 0x40,
+ NOTE_F4 = 0x41,
+ NOTE_F4S = 0x42,
+ NOTE_G4 = 0x43,
+ NOTE_G4S = 0x44,
+ NOTE_A4 = 0x45,
+ NOTE_A4S = 0x46,
+ NOTE_B4 = 0x47,
+
+ NOTE_C5 = 0x48,
+ NOTE_C5S = 0x49,
+ NOTE_D5 = 0x4A,
+ NOTE_D5S = 0x4B,
+ NOTE_E5 = 0x4C,
+ NOTE_F5 = 0x4D,
+ NOTE_F5S = 0x4E,
+ NOTE_G5 = 0x4F,
+ NOTE_G5S = 0x50,
+ NOTE_A5 = 0x51,
+ NOTE_A5S = 0x52,
+ NOTE_B5 = 0x53,
+ };
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/display_list.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/display_list.h
new file mode 100644
index 0000000000..d4f9c28497
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/display_list.h
@@ -0,0 +1,118 @@
+/******************
+ * display_list.h *
+ *****************/
+
+/**********************************************************************************
+ * Adapted from: *
+ * https://github.com/RudolphRiedel/FT800-FT813 *
+ * By Rudolph Riedel *
+ * *
+ * MIT License *
+ * *
+ * Copyright (c) 2017 *
+ * *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy *
+ * of this software and associated documentation files (the "Software"), to deal *
+ * in the Software without restriction, including without limitation the rights *
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell *
+ * copies of the Software, and to permit persons to whom the Software is *
+ * furnished to do so, subject to the following conditions: *
+ * *
+ * The above copyright notice and this permission notice shall be included in all *
+ * copies or substantial portions of the Software. *
+ * *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR *
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, *
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE *
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER *
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, *
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE *
+ * SOFTWARE. *
+ * *
+ **********************************************************************************/
+
+#pragma once
+
+namespace FTDI {
+ /* FT8xx graphics engine specific macros useful for static display list generation */
+ inline uint32_t ALPHA_FUNC(uint8_t func, uint8_t ref) {return DL::ALPHA_FUNC|((func&7UL)<<8)|(ref&255UL);}
+ inline uint32_t BEGIN(begin_t prim) {return DL::BEGIN|(prim&15UL);}
+
+ inline uint32_t BITMAP_SOURCE(uint32_t ram_g_addr) {return DL::BITMAP_SOURCE|(ram_g_addr & (FTDI::ftdi_memory_map::RAM_G_SIZE-1));}
+ inline uint32_t BITMAP_HANDLE(uint8_t handle) {return DL::BITMAP_HANDLE|(handle&31UL);}
+ inline uint32_t BITMAP_LAYOUT(uint8_t format, uint16_t linestride, uint16_t height)
+ {return DL::BITMAP_LAYOUT|((format&31UL)<<19)|((linestride&1023UL)<<9)|(height&511UL);}
+
+ inline uint32_t BITMAP_SIZE(uint8_t filter, uint8_t wrapx, uint8_t wrapy, uint16_t width, uint16_t height)
+ {return DL::BITMAP_SIZE|((filter&1UL)<<20)|((wrapx&1UL)<<19)|((wrapy&1UL)<<18)|((width&511UL)<<9)|(height&511UL);}
+ #if FTDI_API_LEVEL >= 810
+ inline uint32_t BITMAP_LAYOUT_H(uint8_t linestride, uint8_t height)
+ {return DL::BITMAP_LAYOUT_H|((linestride&3UL)<<2)|(height&3UL);}
+ inline uint32_t BITMAP_SIZE_H(uint8_t width, uint8_t height)
+ {return DL::BITMAP_SIZE_H|((width&3UL)<<2)|(height&3UL);}
+ #endif
+ inline uint32_t BITMAP_TRANSFORM_A(uint16_t a) {return DL::BITMAP_TRANSFORM_A|(a&131071UL);}
+ inline uint32_t BITMAP_TRANSFORM_B(uint16_t b) {return DL::BITMAP_TRANSFORM_B|(b&131071UL);}
+ inline uint32_t BITMAP_TRANSFORM_C(uint32_t c) {return DL::BITMAP_TRANSFORM_C|(c&16777215UL);}
+ inline uint32_t BITMAP_TRANSFORM_D(uint16_t d) {return DL::BITMAP_TRANSFORM_D|(d&131071UL);}
+ inline uint32_t BITMAP_TRANSFORM_E(uint16_t e) {return DL::BITMAP_TRANSFORM_E|(e&131071UL);}
+ inline uint32_t BITMAP_TRANSFORM_F(uint32_t f) {return DL::BITMAP_TRANSFORM_F|(f&16777215UL);}
+ inline uint32_t BLEND_FUNC(uint8_t src,uint8_t dst) {return DL::BLEND_FUNC|((src&7UL)<<3)|(dst&7UL);}
+ inline uint32_t CALL(uint16_t dest) {return DL::CALL|(dest&65535UL);}
+ inline uint32_t CELL(uint8_t cell) {return DL::CELL|(cell&127UL);}
+ inline uint32_t CLEAR(bool c,bool s,bool t) {return DL::CLEAR|((c?1UL:0UL)<<2)|((s?1UL:0UL)<<1)|(t?1UL:0UL);}
+ inline uint32_t CLEAR_COLOR_A(uint8_t alpha) {return DL::CLEAR_COLOR_A|(alpha&255UL);}
+ inline uint32_t CLEAR_COLOR_RGB(uint8_t red, uint8_t green, uint8_t blue)
+ {return DL::CLEAR_COLOR_RGB|((red&255UL)<<16)|((green&255UL)<<8)|(blue&255UL);}
+ inline uint32_t CLEAR_COLOR_RGB(uint32_t rgb) {return DL::CLEAR_COLOR_RGB|rgb;}
+ inline uint32_t CLEAR_STENCIL(uint8_t s) {return DL::CLEAR_STENCIL|(s&255UL);}
+ inline uint32_t CLEAR_TAG(uint8_t s) {return DL::CLEAR_TAG|(s&255UL);}
+ inline uint32_t COLOR_A(uint8_t alpha) {return DL::COLOR_A|(alpha&255UL);}
+ inline uint32_t COLOR_MASK(bool r, bool g, bool b, bool a) {return DL::COLOR_MASK|((r?1UL:0UL)<<3)|((g?1UL:0UL)<<2)|((b?1UL:0UL)<<1)|(a?1UL:0UL);}
+ inline uint32_t COLOR_RGB(uint8_t red,uint8_t green,uint8_t blue)
+ {return DL::COLOR_RGB|((red&255UL)<<16)|((green&255UL)<<8)|(blue&255UL);}
+ inline uint32_t COLOR_RGB(uint32_t rgb) {return DL::COLOR_RGB|rgb;}
+ /* inline uint32_t DISPLAY() {return (0UL<<24)) */
+ inline uint32_t END() {return DL::END;}
+ inline uint32_t JUMP(uint16_t dest) {return DL::JUMP|(dest&65535UL);}
+ inline uint32_t LINE_WIDTH(uint16_t width) {return DL::LINE_WIDTH|(width&4095UL);}
+ inline uint32_t MACRO(uint8_t m) {return DL::MACRO|(m&1UL);}
+ inline uint32_t POINT_SIZE(uint16_t size) {return DL::POINT_SIZE|(size&8191UL);}
+ inline uint32_t RESTORE_CONTEXT() {return DL::RESTORE_CONTEXT;}
+ inline uint32_t RETURN () {return DL::RETURN;}
+ inline uint32_t SAVE_CONTEXT() {return DL::SAVE_CONTEXT;}
+ inline uint32_t SCISSOR_XY(uint16_t x,uint16_t y) {
+ return DL::SCISSOR_XY |
+ (FTDI::ftdi_chip >= 810
+ ? ((x&2047UL)<<11)|(y&2047UL)
+ : ((x& 511UL)<<10)|(y&511UL));
+ }
+ inline uint32_t SCISSOR_SIZE(uint16_t w,uint16_t h) {
+ return DL::SCISSOR_SIZE |
+ (FTDI::ftdi_chip >= 810
+ ? ((w&4095UL)<<12)|(h&4095UL)
+ : ((w&1023UL)<<10)|(h&1023UL));
+ }
+ inline uint32_t SCISSOR_XY() {return DL::SCISSOR_XY;}
+ inline uint32_t SCISSOR_SIZE() {
+ return DL::SCISSOR_SIZE |
+ (FTDI::ftdi_chip >= 810
+ ? (2048UL<<12)|(2048UL)
+ : ( 512UL<<10)|( 512UL));
+ }
+ inline uint32_t STENCIL_FUNC(uint16_t func, uint8_t ref, uint8_t mask)
+ {return DL::STENCIL_FUNC|((func&7UL)<<16)|((ref&255UL)<<8)|(mask&255UL);}
+ inline uint32_t STENCIL_MASK(uint8_t mask) {return DL::STENCIL_MASK|(mask&255UL);}
+ inline uint32_t STENCIL_OP(uint8_t sfail, uint8_t spass) {return DL::STENCIL_OP|(((sfail)&7UL)<<3)|(spass&7UL);}
+ inline uint32_t TAG(uint8_t s) {return DL::TAG|(s&255UL);}
+ inline uint32_t TAG_MASK(bool mask) {return DL::TAG_MASK|(mask?1:0);}
+ inline uint32_t VERTEX2F(uint16_t x, uint16_t y) {return DL::VERTEX2F|((x&32767UL)<<15)|(y&32767UL);}
+ inline uint32_t VERTEX2II(uint16_t x,uint16_t y, uint8_t handle = 0, uint8_t cell = 0)
+ {return DL::VERTEX2II|((x&511UL)<<21)|((y&511UL)<<12)|((handle&31UL)<<7)|(cell&127UL);}
+
+ #if FTDI_API_LEVEL >= 810
+ inline uint32_t VERTEX_FORMAT(uint8_t frac) {return DL::VERTEX_FORMAT|(frac&7UL);}
+ inline uint32_t VERTEX_TRANSLATE_X(int32_t x) {return DL::VERTEX_TRANSLATE_X|(x&131071UL);}
+ inline uint32_t VERTEX_TRANSLATE_Y(int32_t y) {return DL::VERTEX_TRANSLATE_Y|(y&131071UL);}
+ #endif
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h
new file mode 100644
index 0000000000..3d6541e707
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/ftdi_basic.h
@@ -0,0 +1,40 @@
+/****************
+ * ftdi_basic.h *
+ ****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2019 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "../compat.h"
+
+#if !defined(__MARLIN_FIRMWARE__)
+ #define FTDI_BASIC
+#endif
+
+#ifdef FTDI_BASIC
+ #include "registers_ft800.h"
+ #include "registers_ft810.h"
+ #include "constants.h"
+ #include "boards.h"
+ #include "commands.h"
+ #include "spi.h"
+ #include "display_list.h"
+ #include "resolutions.h"
+#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft800.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft800.h
new file mode 100644
index 0000000000..ff17d019d7
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft800.h
@@ -0,0 +1,150 @@
+/*********************
+ * registers_ft800.h *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/****************************************************************************
+ * This header defines registers for the FTDI FT800 LCD Driver chip. *
+ ****************************************************************************/
+
+/*******************************************************************************
+ * FT810 *
+ * *
+ * START END ADDR SIZE NAME DESCRIPTION *
+ * *
+ * 0x000000 0x03FFFF 256 kB RAM_G Main Graphics RAM *
+ * *
+ * 0x0C0000 0x0C0003 4 B ROM_CHIPID [0:1] 0x800 Chip Id *
+ * [1:2] 0x0100 Vers ID *
+ * *
+ * 0x0BB23C 0x0FFFFB 275 kB ROM_FONT Font table and bitmap *
+ * *
+ * 0x0FFFFC 0x0FFFFF 4 B ROM_FONT_ADDR Font table pointer address *
+ * *
+ * 0x100000 0x101FFF 8 kB RAM_DL Display List RAM *
+ * *
+ * 0x102000 0x1023FF 1 kB RAM_PAL Palette RAM *
+ * *
+ * 0x102400 0x10257F 380 B * Registers *
+ * *
+ * 0x108000 0x108FFF 4 kB RAM_CMD Command Buffer *
+ * *
+ *******************************************************************************/
+
+#pragma once
+
+namespace FTDI {
+ struct ft800_memory_map {
+
+ // MEMORY LOCATIONS FT800
+ static constexpr uint32_t RAM_G = 0x000000; // Main Graphics RAM
+ static constexpr uint32_t ROM_CHIPID = 0x0C0000; // Chip ID/Version ID
+ static constexpr uint32_t ROM_FONT = 0x0BB23C; // Font ROM
+ static constexpr uint32_t ROM_FONT_ADDR = 0x0FFFFC; // Font Table Pointer
+ static constexpr uint32_t RAM_DL = 0x100000; // Display List RAM
+ static constexpr uint32_t RAM_PAL = 0x102000; // Palette RAM
+ static constexpr uint32_t RAM_REG = 0x102400; // Registers
+ static constexpr uint32_t RAM_CMD = 0x108000; // Command Buffer
+
+ static constexpr uint32_t RAM_G_SIZE = 256*1024l; // 256k
+ };
+
+ struct ft800_registers {
+ // REGISTERS AND ADDRESSES FT800
+
+ // REGISTER ADDRESS SIZE RESET VALUE TYPE DESCRIPTION
+
+ static constexpr uint32_t ID = 0x102400; // 8 0x7C r Identification Register, Always 0x7C
+ static constexpr uint32_t FRAMES = 0x102404; // 32 0x00000000 r Frame Counter, Since Reset
+ static constexpr uint32_t CLOCK = 0x102408; // 32 0x00000000 r Clock cycles, Since Reset
+ static constexpr uint32_t FREQUENCY = 0x10240C; // 28 0x03938700 r/w Main Clock Frequency
+ static constexpr uint32_t RENDERMODE = 0x102410; // 1 0x00 r/w Rendering Mode: 0 = normal, 1 = single-line
+ static constexpr uint32_t SNAPY = 0x102414; // 11 0x0000 r/w Scan Line Select for RENDERMODE 1
+ static constexpr uint32_t SNAPSHOT = 0x102418; // 1 - r Trigger for RENDERMODE 1
+ static constexpr uint32_t CPURESET = 0x10241C; // 3 0x02 r/w RESET Bit2 Audio - Bit1 Touch - Bit0 Graphics
+ static constexpr uint32_t TAP_CRC = 0x102420; // 32 - r Live Video Tap
+ static constexpr uint32_t TAP_MASK = 0x102424; // 32 0xFFFFFFFF r/w Live Video Tap Mask
+ static constexpr uint32_t HCYCLE = 0x102428; // 12 0x224 r/w Horizontal Total Cycle Count
+ static constexpr uint32_t HOFFSET = 0x10242C; // 12 0x02B r/w Horizontal Display Start Offset
+ static constexpr uint32_t HSIZE = 0x102430; // 12 0x1E0 r/w Horizontal Display Pixel Count
+ static constexpr uint32_t HSYNC0 = 0x102434; // 12 0x000 r/w Horizontal Sync Fall Offset
+ static constexpr uint32_t HSYNC1 = 0x102438; // 12 0x029 r/w Horizontal Sync Rise Offset
+ static constexpr uint32_t VCYCLE = 0x10243C; // 12 0x124 r/w Vertical Total Cycle Count
+ static constexpr uint32_t VOFFSET = 0x102440; // 12 0x00C r/w Vertical Display Start Offset
+ static constexpr uint32_t VSIZE = 0x102444; // 12 0x110 r/w Vertical Display Line Count
+ static constexpr uint32_t VSYNC0 = 0x102448; // 10 0x000 r/w Vertical Sync Fall Offset
+ static constexpr uint32_t VSYNC1 = 0x10244C; // 10 0x00A r/w Vertical Sync Rise Offset
+ static constexpr uint32_t DLSWAP = 0x102450; // 2 0x00 r/w Display List Swap Control
+ static constexpr uint32_t ROTATE = 0x102454; // 3 0x00 r/w Screen 90,180, 270 degree rotate
+ static constexpr uint32_t OUTBITS = 0x102458; // 9 0x1B6 r/w Output Resolution, 3x3x3 Bits
+ static constexpr uint32_t DITHER = 0x10245C; // 1 0x01 r/w Output Dither Enable
+ static constexpr uint32_t SWIZZLE = 0x102460; // 4 0x00 r/w Output RGB Swizzle, Pin Change for PCB Routing
+ static constexpr uint32_t CSPREAD = 0x102464; // 1 0x01 r/w Output Clock Spreading Enable
+ static constexpr uint32_t PCLK_POL = 0x102468; // 1 0x00 r/w PCLK Polarity: 0 = Rising Edge, 1 = Falling Edge
+ static constexpr uint32_t PCLK = 0x10246C; // 8 0x00 r/w PCLK Frequency Divider, 0 = Disable Clock
+ static constexpr uint32_t TAG_X = 0x102470; // 11 0x000 r/w Tag Query X Coordinate
+ static constexpr uint32_t TAG_Y = 0x102474; // 11 0x000 r/w Tag Query Y Coordinate
+ static constexpr uint32_t TAG = 0x102478; // 8 0x00 r Tag Query Result
+ static constexpr uint32_t VOL_PB = 0x10247C; // 8 0xFF r/w Audio Playback Volume
+ static constexpr uint32_t VOL_SOUND = 0x102480; // 8 0xFF r/w Audio Synthesizer Volume
+ static constexpr uint32_t SOUND = 0x102484; // 16 0x0000 r/w Audio Sound Effect Select
+ static constexpr uint32_t PLAY = 0x102488; // 1 0x00 r/w Audio Start Effect Playback
+ static constexpr uint32_t GPIO_DIR = 0x10248C; // 8 0x80 r/w GPIO Pin Direction: 0 = Input , 1 = Output
+ static constexpr uint32_t GPIO = 0x102490; // 8 0x00 r/w GPIO Pin Values for 0, 1, 7 Drive Strength 2, 3, 4, 5, 6
+ static constexpr uint32_t INT_FLAGS = 0x102498; // 8 0x00 r Interrupt Flags, Clear by Reading
+ static constexpr uint32_t INT_EN = 0x10249C; // 1 0x00 r/w Global Interrupt Enable
+ static constexpr uint32_t INT_MASK = 0x1024A0; // 8 0xFF r/w Interrupt Enable Mask
+ static constexpr uint32_t PLAYBACK_START = 0x1024A4; // 20 0x00000 r/w Audio Playback RAM Start Address
+ static constexpr uint32_t PLAYBACK_LENGTH = 0x1024A8; // 20 0x00000 r/w Audio Playback Sample Length (Bytes)
+ static constexpr uint32_t PLAYBACK_READPTR = 0x1024AC; // 20 - r Audio Playback Read Pointer
+ static constexpr uint32_t PLAYBACK_FREQ = 0x1024B0; // 16 0x1F40 r/w Audio Playback Frequency (Hz)
+ static constexpr uint32_t PLAYBACK_FORMAT = 0x1024B4; // 2 0x00 r/w Audio Playback Format
+ static constexpr uint32_t PLAYBACK_LOOP = 0x1024B8; // 1 0x00 r/w Audio Playback Loop Enable
+ static constexpr uint32_t PLAYBACK_PLAY = 0x1024BC; // 1 0x00 r Audio Start Playback
+ static constexpr uint32_t PWM_HZ = 0x1024C0; // 14 0x00FA r/w Backlight PWM Frequency (Hz)
+ static constexpr uint32_t PWM_DUTY = 0x1024C4; // 8 0x80 r/w Backlight PWM Duty Cycle: 0 = 0%, 128 = 100%
+ static constexpr uint32_t MACRO_0 = 0x1024C8; // 32 0x00000000 r/w Display List Macro Command 0
+ static constexpr uint32_t MACRO_1 = 0x1024CC; // 32 0x00000000 r/w Display List Macro Command 1
+ static constexpr uint32_t CMD_READ = 0x1024E4; // 12 0x000 r/w Command Buffer Read Pointer
+ static constexpr uint32_t CMD_WRITE = 0x1024E8; // 12 0x000 r/w Command Buffer Write Pointer
+ static constexpr uint32_t CMD_DL = 0x1024EC; // 13 0x0000 r/w Command Display List Offset
+ static constexpr uint32_t TOUCH_MODE = 0x1024F0; // 2 0x03 r/w Touch-Screen Sampling Mode
+ static constexpr uint32_t TOUCH_ADC_MODE = 0x1024F4; // 1 0x01 r/w Select Single Ended or Differential Sampling
+ static constexpr uint32_t TOUCH_CHARGE = 0x1024F8; // 16 0x1770 r/w Touch Screen Charge Time, n x 6 Clocks
+ static constexpr uint32_t TOUCH_SETTLE = 0x1024FC; // 4 0x03 r/w Touch-Screen Settle Time, n x 6 Clocks
+ static constexpr uint32_t TOUCH_OVERSAMPLE = 0x102500; // 4 0x07 r/w Touch-Screen Oversample Factor
+ static constexpr uint32_t TOUCH_RZTHRESH = 0x102504; // 16 0xFFFF r/w Touch-Screen Resistance Threshold
+ static constexpr uint32_t TOUCH_RAW_XY = 0x102508; // 32 - r Touch-Screen Raw (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_RZ = 0x10250C; // 16 - r Touch-Screen Resistance
+ static constexpr uint32_t TOUCH_SCREEN_XY = 0x102510; // 32 - r Touch-Screen Screen (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_TAG_XY = 0x102514; // 32 - r Touch-Screen Tag 0 Lookup (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_TAG = 0x102518; // 8 - r Touch-Screen Tag 0 Result
+ static constexpr uint32_t TOUCH_TRANSFORM_A = 0x10251C; // 32 0x00010000 r/w Touch-Screen Transform Coefficient A (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_B = 0x102520; // 32 0x00000000 r/w Touch-Screen Transform Coefficient B (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_C = 0x102524; // 32 0x00000000 r/w Touch-Screen Transform Coefficient C (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_D = 0x102528; // 32 0x00000000 r/w Touch-Screen Transform Coefficient D (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_E = 0x10252C; // 32 0x00010000 r/w Touch-Screen Transform Coefficient E (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_F = 0x102530; // 32 0x00000000 r/w Touch-Screen Transform Coefficient F (s15.16)
+ // Reserved Addresses 0x102434 - 0x102470
+ static constexpr uint32_t TOUCH_DIRECT_XY = 0x102574; // 32 - r Touch-Screen Direct Conversions XY (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_DIRECT_Z1Z2 = 0x102578; // 32 - r Touch-Screen Direct Conversions Z (z1-MSB16; z2-LSB16)
+ static constexpr uint32_t TRACKER = 0x109000; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8)
+ };
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft810.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft810.h
new file mode 100644
index 0000000000..6cc975896c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/registers_ft810.h
@@ -0,0 +1,185 @@
+/*********************
+ * registers_ft810.h *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/****************************************************************************
+ * This header defines registers for the FTDI FT810 LCD Driver chip. *
+ ****************************************************************************/
+
+/*******************************************************************************
+ * FT810 *
+ * *
+ * START END ADDR SIZE NAME DESCRIPTION *
+ * *
+ * 0x000000 0x0FFFFF 1024 kB RAM_G Main Graphics RAM (0 to 1048572) *
+ * *
+ * 0x0C0000 0x0C0003 4 B ROM_CHIPID [0:1] 0x800 Chip Id *
+ * [1:2] 0x0100 Vers ID *
+ * *
+ * 0x1E0000 0x2FFFFB 1152 kB ROM_FONT Font table and bitmap *
+ * *
+ * 0x2FFFFC 0x2FFFFF 4 B ROM_FONT_ADDR Font table pointer address *
+ * *
+ * 0x300000 0x301FFF 8 kB RAM_DL Display List RAM *
+ * *
+ * 0x302000 0x302FFF 4 kB * Registers *
+ * *
+ * 0x308000 0x308FFF 4 kB RAM_CMD Command Buffer *
+ * *
+ *******************************************************************************/
+
+#pragma once
+
+namespace FTDI {
+ struct ft810_memory_map {
+ // MEMORY LOCATIONS FT810
+ static constexpr uint32_t RAM_G = 0x000000; // Main Graphics RAM
+ static constexpr uint32_t ROM_CHIPID = 0x0C0000; // Chip ID/Version ID
+ static constexpr uint32_t ROM_FONT = 0x1E0000; // Font ROM
+ static constexpr uint32_t ROM_FONT_ADDR = 0x2FFFFC; // Font Table Pointer
+ static constexpr uint32_t RAM_DL = 0x300000; // Display List RAM
+ static constexpr uint32_t RAM_REG = 0x302000; // Registers
+ static constexpr uint32_t RAM_CMD = 0x308000; // Command Buffer
+
+ static constexpr uint32_t RAM_G_SIZE = 1024*1024l; // 1024k
+ };
+
+ struct ft810_registers {
+ // REGISTERS AND ADDRESSES FT810
+
+ // REGISTER ADDRESS SIZE RESET VALUE TYPE DESCRIPTION
+
+ static constexpr uint32_t ID = 0x302000; // 8 0x7C r Identification Register, Always 0x7C
+ static constexpr uint32_t FRAMES = 0x302004; // 32 0x00000000 r Frame Counter, Since Reset
+ static constexpr uint32_t CLOCK = 0x302008; // 32 0x00000000 r Clock cycles, Since Reset
+ static constexpr uint32_t FREQUENCY = 0x30200C; // 28 0x03938700 r/w Main Clock Frequency
+ static constexpr uint32_t RENDERMODE = 0x302010; // 1 0x00 r/w Rendering Mode: 0 = normal, 1 = single-line
+ static constexpr uint32_t SNAPY = 0x302014; // 11 0x0000 r/w Scan Line Select for RENDERMODE 1
+ static constexpr uint32_t SNAPSHOT = 0x302018; // 1 - r Trigger for RENDERMODE 1
+ static constexpr uint32_t SNAPFORMAT = 0x30201C; // 6 0x20 r/w Pixel Format for Scanline Readout
+ static constexpr uint32_t CPURESET = 0x302020; // 3 0x02 r/w RESET Bit2 Audio - Bit1 Touch - Bit0 Graphics
+ static constexpr uint32_t TAP_CRC = 0x302024; // 32 - r Live Video Tap
+ static constexpr uint32_t TAP_MASK = 0x302028; // 32 0xFFFFFFFF r/w Live Video Tap Mask
+ static constexpr uint32_t HCYCLE = 0x30202C; // 12 0x224 r/w Horizontal Total Cycle Count
+ static constexpr uint32_t HOFFSET = 0x302030; // 12 0x02B r/w Horizontal Display Start Offset
+ static constexpr uint32_t HSIZE = 0x302034; // 12 0x1E0 r/w Horizontal Display Pixel Count
+ static constexpr uint32_t HSYNC0 = 0x302038; // 12 0x000 r/w Horizontal Sync Fall Offset
+ static constexpr uint32_t HSYNC1 = 0x30203C; // 12 0x029 r/w Horizontal Sync Rise Offset
+ static constexpr uint32_t VCYCLE = 0x302040; // 12 0x124 r/w Vertical Total Cycle Count
+ static constexpr uint32_t VOFFSET = 0x302044; // 12 0x00C r/w Vertical Display Start Offset
+ static constexpr uint32_t VSIZE = 0x302048; // 12 0x110 r/w Vertical Display Line Count
+ static constexpr uint32_t VSYNC0 = 0x30204C; // 10 0x000 r/w Vertical Sync Fall Offset
+ static constexpr uint32_t VSYNC1 = 0x302050; // 10 0x00A r/w Vertical Sync Rise Offset
+ static constexpr uint32_t DLSWAP = 0x302054; // 2 0x00 r/w Display List Swap Control
+ static constexpr uint32_t ROTATE = 0x302058; // 3 0x00 r/w Screen 90,180, 270 degree rotate
+ static constexpr uint32_t OUTBITS = 0x30205C; // 9 0x1B6 r/w Output Resolution, 3x3x3 Bits
+ static constexpr uint32_t DITHER = 0x302060; // 1 0x01 r/w Output Dither Enable
+ static constexpr uint32_t SWIZZLE = 0x302064; // 4 0x00 r/w Output RGB Swizzle, Pin Change for PCB Routing
+ static constexpr uint32_t CSPREAD = 0x302068; // 1 0x01 r/w Output Clock Spreading Enable
+ static constexpr uint32_t PCLK_POL = 0x30206C; // 1 0x00 r/w PCLK Polarity: 0 = Rising Edge, 1 = Falling Edge
+ static constexpr uint32_t PCLK = 0x302070; // 8 0x00 r/w PCLK Frequency Divider, 0 = Disable Clock
+ static constexpr uint32_t TAG_X = 0x302074; // 11 0x000 r/w Tag Query X Coordinate
+ static constexpr uint32_t TAG_Y = 0x302078; // 11 0x000 r/w Tag Query Y Coordinate
+ static constexpr uint32_t TAG = 0x30207C; // 8 0x00 r Tag Query Result
+ static constexpr uint32_t VOL_PB = 0x302080; // 8 0xFF r/w Audio Playback Volume
+ static constexpr uint32_t VOL_SOUND = 0x302084; // 8 0xFF r/w Audio Synthesizer Volume
+ static constexpr uint32_t SOUND = 0x302088; // 16 0x0000 r/w Audio Sound Effect Select
+ static constexpr uint32_t PLAY = 0x30208C; // 1 0x00 r/w Audio Start Effect Playback
+ static constexpr uint32_t GPIO_DIR = 0x302090; // 8 0x80 r/w GPIO Pin Direction: 0 = Input , 1 = Output
+ static constexpr uint32_t GPIO = 0x302094; // 8 0x00 r/w GPIO Pin Values for 0, 1, 7 Drive Strength 2, 3, 4, 5, 6
+ static constexpr uint32_t GPIOX_DIR = 0x302098; // 16 0x8000 r/w Extended GPIO Pin Direction
+ static constexpr uint32_t GPIOX = 0x30209C; // 16 0x0080 r/w Extended GPIO Pin Values
+ // Reserved Addr 0x3020A0
+ // Reserved Addr 0x3020A4
+ static constexpr uint32_t INT_FLAGS = 0x3020A8; // 8 0x00 r Interrupt Flags, Clear by Reading
+ static constexpr uint32_t INT_EN = 0x3020AC; // 1 0x00 r/w Global Interrupt Enable
+ static constexpr uint32_t INT_MASK = 0x3020B0; // 8 0xFF r/w Interrupt Enable Mask
+ static constexpr uint32_t PLAYBACK_START = 0x3020B4; // 20 0x00000 r/w Audio Playback RAM Start Address
+ static constexpr uint32_t PLAYBACK_LENGTH = 0x3020B8; // 20 0x00000 r/w Audio Playback Sample Length (Bytes)
+ static constexpr uint32_t PLAYBACK_READPTR = 0x3020BC; // 20 - r Audio Playback Read Pointer
+ static constexpr uint32_t PLAYBACK_FREQ = 0x3020C0; // 16 0x1F40 r/w Audio Playback Frequency (Hz)
+ static constexpr uint32_t PLAYBACK_FORMAT = 0x3020C4; // 2 0x00 r/w Audio Playback Format
+ static constexpr uint32_t PLAYBACK_LOOP = 0x3020C8; // 1 0x00 r/w Audio Playback Loop Enable
+ static constexpr uint32_t PLAYBACK_PLAY = 0x3020CC; // 1 0x00 r Audio Start Playback
+ static constexpr uint32_t PWM_HZ = 0x3020D0; // 14 0x00FA r/w Backlight PWM Frequency (Hz)
+ static constexpr uint32_t PWM_DUTY = 0x3020D4; // 8 0x80 r/w Backlight PWM Duty Cycle: 0 = 0%, 128 = 100%
+ static constexpr uint32_t MACRO_0 = 0x3020D8; // 32 0x00000000 r/w Display List Macro Command 0
+ static constexpr uint32_t MACRO_1 = 0x3020DC; // 32 0x00000000 r/w Display List Macro Command 1
+ // Reserved Addr 0x3020E0
+ // Reserved Addr 0x3020E4
+ // Reserved Addr 0x3020E8
+ // Reserved Addr 0x3020EC
+ // Reserved Addr 0x3020F0
+ // Reserved Addr 0x3020F4
+ static constexpr uint32_t CMD_READ = 0x3020F8; // 12 0x000 r/w Command Buffer Read Pointer
+ static constexpr uint32_t CMD_WRITE = 0x3020FC; // 12 0x000 r/w Command Buffer Write Pointer
+ static constexpr uint32_t CMD_DL = 0x302100; // 13 0x0000 r/w Command Display List Offset
+ static constexpr uint32_t TOUCH_MODE = 0x302104; // 2 0x03 r/w Touch-Screen Sampling Mode
+ static constexpr uint32_t TOUCH_ADC_MODE = 0x302108; // 1 0x01 r/w Select Single Ended or Differential Sampling
+ static constexpr uint32_t TOUCH_CHARGE = 0x30210C; // 16 0x1770 r/w Touch Screen Charge Time, n x 6 Clocks
+ static constexpr uint32_t TOUCH_SETTLE = 0x302110; // 4 0x03 r/w Touch-Screen Settle Time, n x 6 Clocks
+ static constexpr uint32_t TOUCH_OVERSAMPLE = 0x302114; // 4 0x07 r/w Touch-Screen Oversample Factor
+ static constexpr uint32_t TOUCH_RZTHRESH = 0x302118; // 16 0xFFFF r/w Touch-Screen Resistance Threshold
+ static constexpr uint32_t TOUCH_RAW_XY = 0x30211C; // 32 - r Touch-Screen Raw (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_RZ = 0x302120; // 16 - r Touch-Screen Resistance
+ static constexpr uint32_t TOUCH_SCREEN_XY = 0x302124; // 32 - r Touch-Screen Screen (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_TAG_XY = 0x302128; // 32 - r Touch-Screen Tag 0 Lookup (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_TAG = 0x30212C; // 8 - r Touch-Screen Tag 0 Result
+ static constexpr uint32_t TOUCH_TAG1_XY = 0x302130; // 32 - r Touch-Screen Tag 1 Lookup
+ static constexpr uint32_t TOUCH_TAG1 = 0x302134; // 8 - r Touch-Screen Tag 1 Result
+ static constexpr uint32_t TOUCH_TAG2_XY = 0x302138; // 32 - r Touch-Screen Tag 2 Lookup
+ static constexpr uint32_t TOUCH_TAG2 = 0x30213C; // 8 - r Touch-Screen Tag 2 Result
+ static constexpr uint32_t TOUCH_TAG3_XY = 0x302140; // 32 - r Touch-Screen Tag 3 Lookup
+ static constexpr uint32_t TOUCH_TAG3 = 0x302144; // 8 - r Touch-Screen Tag 3 Result
+ static constexpr uint32_t TOUCH_TAG4_XY = 0x302148; // 32 - r Touch-Screen Tag 4 Lookup
+ static constexpr uint32_t TOUCH_TAG4 = 0x30214C; // 8 - r Touch-Screen Tag 4 Result
+ static constexpr uint32_t TOUCH_TRANSFORM_A = 0x302150; // 32 0x00010000 r/w Touch-Screen Transform Coefficient A (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_B = 0x302154; // 32 0x00000000 r/w Touch-Screen Transform Coefficient B (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_C = 0x302158; // 32 0x00000000 r/w Touch-Screen Transform Coefficient C (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_D = 0x30215C; // 32 0x00000000 r/w Touch-Screen Transform Coefficient D (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_E = 0x302160; // 32 0x00010000 r/w Touch-Screen Transform Coefficient E (s15.16)
+ static constexpr uint32_t TOUCH_TRANSFORM_F = 0x302164; // 32 0x00000000 r/w Touch-Screen Transform Coefficient F (s15.16)
+ static constexpr uint32_t TOUCH_CONFIG = 0x302168; // 16 0x8381 r/w Touch Configuration
+ static constexpr uint32_t CTOUCH_TOUCH4_X = 0x30216C; // 16 - r Extended Mode Touch Screen
+ // Reserved Addresses 0x302170
+ static constexpr uint32_t BIST_EN = 0x302174; // 1 0 r/w BIST Memory Mapping Enable
+ // Reserved Addr 0x302178
+ // Reserved Addr 0x30217C
+ static constexpr uint32_t TRIM = 0x302180; // 8 0 r/w Internal Clock Trimming
+ static constexpr uint32_t ANA_COMP = 0x302184; // 8 0 r/w Analog Control Register
+ static constexpr uint32_t SPI_WIDTH = 0x302188; // 3 0 r/w QSPI Bus Width Setting
+ static constexpr uint32_t TOUCH_DIRECT_XY = 0x30218C; // 32 - r Touch-Screen Direct Conversions XY (x-MSB16; y-LSB16)
+ static constexpr uint32_t TOUCH_DIRECT_Z1Z2 = 0x302190; // 32 - r Touch-Screen Direct Conversions Z (z1-MSB16; z2-LSB16)
+ // Reserved Addresses 0x302194 - 0x302560
+ static constexpr uint32_t DATESTAMP = 0x320564; // 128 - r Stamp Date Code
+ static constexpr uint32_t CMDB_SPACE = 0x302574; // 12 0xFFC r/w Command DL Space Available
+ static constexpr uint32_t CMDB_WRITE = 0x302578; // 32 0 w Command DL Write
+
+ static constexpr uint32_t TRACKER = 0x309000; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8)
+ static constexpr uint32_t TRACKER_1 = 0x309004; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8)
+ static constexpr uint32_t TRACKER_2 = 0x309008; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8)
+ static constexpr uint32_t TRACKER_3 = 0x30900C; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8)
+ static constexpr uint32_t TRACKER_4 = 0x309010; // 32 0x00000000 r/w Track Register (Track Value MSB16; Tag Value - LSB8)
+
+ static constexpr uint32_t MEDIAFIFO_READ = 0x309014; // 32 0x00000000 r/w Media FIFO read pointer
+ static constexpr uint32_t MEDIAFIFO_WRITE = 0x309018; // 32 0x00000000 r/w Media FIFO write pointer
+ };
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/resolutions.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/resolutions.h
new file mode 100644
index 0000000000..c7fb0c37fc
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/resolutions.h
@@ -0,0 +1,128 @@
+/*****************
+ * resolutions.h *
+ *****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2019 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/***
+ * The FT8xx has odd registers that don't correspond to timing values in
+ * display datasheets. This macro computes the register values using the
+ * formulas given in the document:
+ *
+ * Bridgetek Application Note
+ * AN_336 FT8xx
+ * Selecting an LCD Display
+ * Version 2.1
+ * Issue Date: 2017-11-14
+ *
+ */
+#define COMPUTE_REGS_FROM_DATASHEET \
+ constexpr uint16_t Hoffset = thfp + thb - 1; \
+ constexpr uint16_t Hcycle = th; \
+ constexpr uint16_t Hsync0 = thfp - 1 ; \
+ constexpr uint16_t Hsync1 = thfp + thpw - 1; \
+ constexpr uint16_t Voffset = tvfp + tvb - 1; \
+ constexpr uint16_t Vcycle = tv; \
+ constexpr uint16_t Vsync0 = tvfp - 1; \
+ constexpr uint16_t Vsync1 = tvfp + tvpw - 1; \
+ static_assert(thfp + thb + Hsize == th, "Mismatch in display th"); \
+ static_assert(tvfp + tvb + Vsize == tv, "Mismatch in display tv");
+
+#ifdef TOUCH_UI_320x240
+ namespace FTDI {
+ constexpr uint8_t Pclk = 8;
+ constexpr uint8_t Pclkpol = 0;
+ constexpr uint16_t Hsize = 320;
+ constexpr uint16_t Vsize = 240;
+ constexpr uint16_t Vsync0 = 0;
+ constexpr uint16_t Vsync1 = 2;
+ constexpr uint16_t Voffset = 13;
+ constexpr uint16_t Vcycle = 263;
+ constexpr uint16_t Hsync0 = 0;
+ constexpr uint16_t Hsync1 = 10;
+ constexpr uint16_t Hoffset = 70;
+ constexpr uint16_t Hcycle = 408;
+
+ constexpr uint32_t default_transform_a = 0x000054ad;
+ constexpr uint32_t default_transform_b = 0xffffff52;
+ constexpr uint32_t default_transform_c = 0xfff7f6e4;
+ constexpr uint32_t default_transform_d = 0x00000065;
+ constexpr uint32_t default_transform_e = 0xffffbe3b;
+ constexpr uint32_t default_transform_f = 0x00f68e75;
+ }
+
+#elif defined(TOUCH_UI_480x272)
+ namespace FTDI {
+ constexpr uint8_t Pclk = 7;
+ constexpr uint8_t Pclkpol = 1;
+ constexpr uint16_t Hsize = 480;
+ constexpr uint16_t Vsize = 272;
+
+ constexpr uint16_t th = 525; // One horizontal line
+ constexpr uint16_t thfp = 43; // HS Front porch
+ constexpr uint16_t thb = 2; // HS Back porch (blanking)
+ constexpr uint16_t thpw = 41; // HS pulse width
+
+ constexpr uint16_t tv = 286; // Vertical period time
+ constexpr uint16_t tvfp = 12; // VS Front porch
+ constexpr uint16_t tvb = 2; // VS Back porch (blanking)
+ constexpr uint16_t tvpw = 10; // VS pulse width
+
+ COMPUTE_REGS_FROM_DATASHEET
+
+ constexpr uint32_t default_transform_a = 0x00008100;
+ constexpr uint32_t default_transform_b = 0x00000000;
+ constexpr uint32_t default_transform_c = 0xFFF18000;
+ constexpr uint32_t default_transform_d = 0x00000000;
+ constexpr uint32_t default_transform_e = 0xFFFFB100;
+ constexpr uint32_t default_transform_f = 0x0120D000;
+ }
+
+#elif defined(TOUCH_UI_800x480)
+ namespace FTDI {
+ constexpr uint8_t Pclk = 3;
+ constexpr uint8_t Pclkpol = 1;
+ constexpr uint16_t Hsize = 800;
+ constexpr uint16_t Vsize = 480;
+
+ constexpr uint16_t th = 1056; // One horizontal line
+ constexpr uint16_t thfp = 210; // HS Front porch
+ constexpr uint16_t thb = 46; // HS Back porch (blanking)
+ constexpr uint16_t thpw = 23; // HS pulse width
+
+ constexpr uint16_t tv = 525; // Vertical period time
+ constexpr uint16_t tvfp = 22; // VS Front porch
+ constexpr uint16_t tvb = 23; // VS Back porch (blanking)
+ constexpr uint16_t tvpw = 10; // VS pulse width
+
+ COMPUTE_REGS_FROM_DATASHEET
+
+ constexpr uint32_t default_transform_a = 0x0000D8B9;
+ constexpr uint32_t default_transform_b = 0x00000124;
+ constexpr uint32_t default_transform_c = 0xFFE23926;
+ constexpr uint32_t default_transform_d = 0xFFFFFF51;
+ constexpr uint32_t default_transform_e = 0xFFFF7E4F;
+ constexpr uint32_t default_transform_f = 0x01F0AF70;
+ }
+
+#else
+ #error Unknown or no LULZBOT_TOUCH_UI display resolution specified. To add a display resolution, modify "ftdi_eve_resolutions.h"
+#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp
new file mode 100644
index 0000000000..af33b5f055
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.cpp
@@ -0,0 +1,178 @@
+/***********
+ * spi.cpp *
+ ***********/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_basic.h"
+
+#ifdef FTDI_BASIC
+
+/********************************* SPI Functions *********************************/
+
+namespace FTDI {
+ #if !defined(CLCD_USE_SOFT_SPI)
+ SPISettings SPI::spi_settings(SPI_FREQUENCY, MSBFIRST, SPI_MODE0);
+ #endif
+
+ void SPI::spi_init (void) {
+ SET_OUTPUT(CLCD_MOD_RESET); // Module Reset (a.k.a. PD, not SPI)
+ WRITE(CLCD_MOD_RESET, 0); // start with module in power-down
+
+ SET_OUTPUT(CLCD_SPI_CS);
+ WRITE(CLCD_SPI_CS, 1);
+
+ #ifdef SPI_FLASH_SS
+ SET_OUTPUT(SPI_FLASH_SS);
+ WRITE(SPI_FLASH_SS, 1);
+ #endif
+
+ #ifdef CLCD_USE_SOFT_SPI
+ SET_OUTPUT(CLCD_SOFT_SPI_MOSI);
+ WRITE(CLCD_SOFT_SPI_MOSI, 1);
+
+ SET_OUTPUT(CLCD_SOFT_SPI_SCLK);
+ WRITE(CLCD_SOFT_SPI_SCLK, 0);
+
+ SET_INPUT_PULLUP(CLCD_SOFT_SPI_MISO);
+ #else
+ ::SPI.begin();
+ #endif
+ }
+
+ #ifdef CLCD_USE_SOFT_SPI
+ uint8_t SPI::_soft_spi_xfer (uint8_t spiOutByte) {
+ uint8_t spiIndex = 0x80;
+ uint8_t spiInByte = 0;
+ uint8_t k;
+
+ noInterrupts();
+ for(k = 0; k <8; k++) { // Output and Read each bit of spiOutByte and spiInByte
+ if (spiOutByte & spiIndex) { // Output MOSI Bit
+ WRITE(CLCD_SOFT_SPI_MOSI, 1);
+ }
+ else {
+ WRITE(CLCD_SOFT_SPI_MOSI, 0);
+ }
+ WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock
+ WRITE(CLCD_SOFT_SPI_SCLK, 0);
+
+ if (READ(CLCD_SOFT_SPI_MISO)) {
+ spiInByte |= spiIndex;
+ }
+
+ spiIndex >>= 1;
+ }
+ interrupts();
+ return spiInByte;
+ }
+ #endif
+
+ #ifdef CLCD_USE_SOFT_SPI
+ void SPI::_soft_spi_send (uint8_t spiOutByte) {
+ uint8_t spiIndex = 0x80;
+ uint8_t k;
+
+ noInterrupts();
+ for(k = 0; k <8; k++) { // Output each bit of spiOutByte
+ if (spiOutByte & spiIndex) { // Output MOSI Bit
+ WRITE(CLCD_SOFT_SPI_MOSI, 1);
+ }
+ else {
+ WRITE(CLCD_SOFT_SPI_MOSI, 0);
+ }
+ WRITE(CLCD_SOFT_SPI_SCLK, 1); // Pulse Clock
+ WRITE(CLCD_SOFT_SPI_SCLK, 0);
+
+ spiIndex >>= 1;
+ }
+ interrupts();
+ }
+ #endif
+
+ void SPI::spi_read_bulk (void *data, uint16_t len) {
+ uint8_t* p = (uint8_t *)data;
+ #if !defined(CLCD_USE_SOFT_SPI)
+ ::SPI.transfer(p, len);
+ #else
+ while (len--) *p++ = spi_recv();
+ #endif
+ }
+
+ bool SPI::spi_verify_bulk (const void *data, uint16_t len) {
+ const uint8_t* p = (const uint8_t *)data;
+ while (len--) if (*p++ != spi_recv()) return false;
+ return true;
+ }
+
+ // CLCD SPI - Chip Select
+ void SPI::spi_ftdi_select (void) {
+ #if !defined(CLCD_USE_SOFT_SPI)
+ ::SPI.beginTransaction(spi_settings);
+ #endif
+ WRITE(CLCD_SPI_CS, 0);
+ delayMicroseconds(1);
+ }
+
+ // CLCD SPI - Chip Deselect
+ void SPI::spi_ftdi_deselect (void) {
+ WRITE(CLCD_SPI_CS, 1);
+ #if !defined(CLCD_USE_SOFT_SPI)
+ ::SPI.endTransaction();
+ #endif
+ }
+
+ #ifdef SPI_FLASH_SS
+ // Serial SPI Flash SPI - Chip Select
+ void SPI::spi_flash_select () {
+ #if !defined(CLCD_USE_SOFT_SPI)
+ ::SPI.beginTransaction(spi_settings);
+ #endif
+ WRITE(SPI_FLASH_SS, 0);
+ delayMicroseconds(1);
+ }
+
+ // Serial SPI Flash SPI - Chip Deselect
+ void SPI::spi_flash_deselect () {
+ WRITE(SPI_FLASH_SS, 1);
+ #if !defined(CLCD_USE_SOFT_SPI)
+ ::SPI.endTransaction();
+ #endif
+ }
+ #endif
+
+ // Not really a SPI signal...
+ void SPI::ftdi_reset (void) {
+ WRITE(CLCD_MOD_RESET, 0);
+ delay(6); /* minimum time for power-down is 5ms */
+ WRITE(CLCD_MOD_RESET, 1);
+ delay(21); /* minimum time to allow from rising PD_N to first access is 20ms */
+ }
+
+ // Not really a SPI signal...
+ void SPI::test_pulse(void)
+ {
+ #ifdef CLCD_AUX_0
+ WRITE(CLCD_AUX_0, 1);
+ delayMicroseconds(10);
+ WRITE(CLCD_AUX_0, 0);
+ #endif
+ }
+}
+#endif // FTDI_BASIC
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h
new file mode 100644
index 0000000000..c5564eda04
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/basic/spi.h
@@ -0,0 +1,128 @@
+/*********
+ * spi.h *
+ *********/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#if !defined(CLCD_USE_SOFT_SPI)
+ #include
+#endif
+
+namespace FTDI {
+ namespace SPI {
+ #if !defined(CLCD_USE_SOFT_SPI)
+ extern SPISettings spi_settings;
+ #endif
+
+ uint8_t _soft_spi_xfer (uint8_t val);
+ void _soft_spi_send (uint8_t val);
+
+ void spi_init ();
+
+ void spi_ftdi_select ();
+ void spi_ftdi_deselect ();
+
+ void spi_flash_select ();
+ void spi_flash_deselect ();
+
+ inline uint8_t spi_recv() {
+ #ifdef CLCD_USE_SOFT_SPI
+ return _soft_spi_xfer(0x00);
+ #else
+ return ::SPI.transfer(0x00);
+ #endif
+ };
+
+ inline void spi_send (uint8_t val) {
+ #ifdef CLCD_USE_SOFT_SPI
+ _soft_spi_send(val);
+ #else
+ ::SPI.transfer(val);
+ #endif
+ };
+
+ inline void spi_write_8 (uint8_t val) {spi_send(val);};
+ inline uint8_t spi_read_8 () {return spi_recv();};
+
+ namespace least_significant_byte_first {
+ inline void spi_write_16 (uint16_t val) {spi_send(val >> 0);
+ spi_send(val >> 8);};
+ inline void spi_write_32 (uint32_t val) {spi_send(val >> 0);
+ spi_send(val >> 8);
+ spi_send(val >> 16);
+ spi_send(val >> 24);};
+
+ inline uint8_t spi_read_8 () {return spi_recv();};
+ inline uint16_t spi_read_16 () {return (((uint16_t) spi_recv()) << 0) |
+ (((uint16_t) spi_recv()) << 8);};
+ inline uint32_t spi_read_32 () {return (((uint32_t) spi_recv()) << 0) |
+ (((uint32_t) spi_recv()) << 8) |
+ (((uint32_t) spi_recv()) << 16) |
+ (((uint32_t) spi_recv()) << 24);};
+ }
+
+ namespace most_significant_byte_first {
+ inline void spi_write_16 (uint16_t val) {spi_send(val >> 8);
+ spi_send(val >> 0);};
+ inline void spi_write_24 (uint32_t val) {spi_send(val >> 16);
+ spi_send(val >> 8);
+ spi_send(val >> 0);};
+ inline void spi_write_32 (uint32_t val) {spi_send(val >> 24);
+ spi_send(val >> 16);
+ spi_send(val >> 8);
+ spi_send(val >> 0);};
+
+ inline uint16_t spi_read_16 () {return (((uint16_t) spi_recv()) << 8) |
+ (((uint16_t) spi_recv()) << 0);};
+ inline uint32_t spi_read_32 () {return (((uint32_t) spi_recv()) << 24) |
+ (((uint32_t) spi_recv()) << 16) |
+ (((uint32_t) spi_recv()) << 8) |
+ (((uint32_t) spi_recv()) << 0);};
+ }
+
+ inline uint8_t ram_write(const uint8_t *p) {return *p;}
+ inline uint8_t pgm_write(const uint8_t *p) {return pgm_read_byte(p);}
+
+ typedef uint8_t (*bulk_write_op)(const uint8_t*);
+
+ // Generic template for function for writing multiple bytes, plus padding bytes.
+ // The template parameter op is an inlineable function which is applied to each byte.
+
+ template
+ void spi_write_bulk(const void *data, uint16_t len, uint8_t padding) {
+ const uint8_t* p = (const uint8_t *)data;
+ while (len--) spi_send(byte_op(p++));
+ while (padding--) spi_send(0);
+ }
+
+ template
+ void spi_write_bulk(const void *data, uint16_t len) {
+ const uint8_t* p = (const uint8_t *)data;
+ while (len--) spi_send(byte_op(p++));
+ }
+
+ void spi_read_bulk( void *data, uint16_t len);
+ bool spi_verify_bulk(const void *data, uint16_t len);
+
+ void ftdi_reset(void);
+ void test_pulse(void);
+ }
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h
new file mode 100644
index 0000000000..992f19a3b3
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/compat.h
@@ -0,0 +1,211 @@
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "../config.h"
+
+#ifdef __MARLIN_FIRMWARE__
+ // Marlin will define the I/O functions for us
+
+ #if ENABLED(LULZBOT_TOUCH_UI)
+ #define FTDI_BASIC
+ #define FTDI_EXTENDED
+ #endif
+#else
+ #include "Arduino.h"
+
+ #if !defined(CLCD_USE_SOFT_SPI)
+ #include "SPI.h"
+ #endif
+
+ namespace fast_io {
+
+ template
+ struct port_pin {
+ typedef port_t port;
+ static inline void set_high() {port::port() = (port::port() | bits);}
+ static inline void set_low() {port::port() = (port::port() & (~bits));}
+ static inline void set_input() {port::ddr() = (port::ddr() & (~bits));}
+ static inline void set_input_pullup() {set_input(); set_high();}
+ static inline void set_output() {port::ddr() = (port::ddr() | bits);}
+ static inline uint8_t read() {return port::pin() & bits;}
+ static inline void write(bool v) {if (v) set_high(); else set_low();}
+ };
+
+ #define MAKE_AVR_PORT_PINS(ID) \
+ struct port_##ID { \
+ static volatile uint8_t &pin() {return PIN##ID;}; \
+ static volatile uint8_t &port() {return PORT##ID;}; \
+ static volatile uint8_t &ddr() {return DDR##ID;}; \
+ }; \
+ typedef port_pin AVR_##ID##0; \
+ typedef port_pin AVR_##ID##1; \
+ typedef port_pin AVR_##ID##2; \
+ typedef port_pin AVR_##ID##3; \
+ typedef port_pin AVR_##ID##4; \
+ typedef port_pin AVR_##ID##5; \
+ typedef port_pin AVR_##ID##6; \
+ typedef port_pin AVR_##ID##7;
+
+ #ifdef PORTA
+ MAKE_AVR_PORT_PINS(A);
+ #endif
+ #ifdef PORTB
+ MAKE_AVR_PORT_PINS(B);
+ #endif
+ #ifdef PORTC
+ MAKE_AVR_PORT_PINS(C);
+ #endif
+ #ifdef PORTD
+ MAKE_AVR_PORT_PINS(D);
+ #endif
+ #ifdef PORTE
+ MAKE_AVR_PORT_PINS(E);
+ #endif
+ #ifdef PORTF
+ MAKE_AVR_PORT_PINS(F);
+ #endif
+ #ifdef PORTG
+ MAKE_AVR_PORT_PINS(G);
+ #endif
+ #ifdef PORTH
+ MAKE_AVR_PORT_PINS(H);
+ #endif
+ #ifdef PORTJ
+ MAKE_AVR_PORT_PINS(J);
+ #endif
+ #ifdef PORTK
+ MAKE_AVR_PORT_PINS(K);
+ #endif
+ #ifdef PORTL
+ MAKE_AVR_PORT_PINS(L);
+ #endif
+ #ifdef PORTQ
+ MAKE_AVR_PORT_PINS(Q);
+ #endif
+ #ifdef PORTR
+ MAKE_AVR_PORT_PINS(R);
+ #endif
+
+ #undef MAKE_AVR_PORT_PINS
+
+ template
+ struct arduino_digital_pin {
+ static constexpr uint8_t pin = p;
+ static inline void set_high() {digitalWrite(p, HIGH);}
+ static inline void set_low() {digitalWrite(p, LOW);}
+ static inline void set_input() {pinMode(p, INPUT);}
+ static inline void set_input_pullup() {pinMode(p, INPUT_PULLUP);}
+ static inline void set_output() {pinMode(p, OUTPUT);}
+ static inline uint8_t read() {return digitalRead(p);}
+ static inline void write(bool v) {digitalWrite(p, v ? HIGH : LOW);}
+ };
+
+ #define MAKE_ARDUINO_PINS(ID) typedef arduino_digital_pin ARDUINO_DIGITAL_##ID;
+ MAKE_ARDUINO_PINS( 0);
+ MAKE_ARDUINO_PINS( 1);
+ MAKE_ARDUINO_PINS( 2);
+ MAKE_ARDUINO_PINS( 3);
+ MAKE_ARDUINO_PINS( 4);
+ MAKE_ARDUINO_PINS( 5);
+ MAKE_ARDUINO_PINS( 6);
+ MAKE_ARDUINO_PINS( 7);
+ MAKE_ARDUINO_PINS( 8);
+ MAKE_ARDUINO_PINS( 9);
+ MAKE_ARDUINO_PINS(10);
+ MAKE_ARDUINO_PINS(11);
+ MAKE_ARDUINO_PINS(12);
+ MAKE_ARDUINO_PINS(13);
+ MAKE_ARDUINO_PINS(14);
+ MAKE_ARDUINO_PINS(15);
+ MAKE_ARDUINO_PINS(16);
+ MAKE_ARDUINO_PINS(17);
+ MAKE_ARDUINO_PINS(18);
+ MAKE_ARDUINO_PINS(19);
+ MAKE_ARDUINO_PINS(10);
+ MAKE_ARDUINO_PINS(21);
+ MAKE_ARDUINO_PINS(22);
+ MAKE_ARDUINO_PINS(23);
+ MAKE_ARDUINO_PINS(24);
+ MAKE_ARDUINO_PINS(25);
+ MAKE_ARDUINO_PINS(26);
+ MAKE_ARDUINO_PINS(27);
+ MAKE_ARDUINO_PINS(28);
+ MAKE_ARDUINO_PINS(29);
+ MAKE_ARDUINO_PINS(30);
+ MAKE_ARDUINO_PINS(31);
+ MAKE_ARDUINO_PINS(32);
+ MAKE_ARDUINO_PINS(33);
+ MAKE_ARDUINO_PINS(34);
+ MAKE_ARDUINO_PINS(35);
+ MAKE_ARDUINO_PINS(36);
+ MAKE_ARDUINO_PINS(37);
+ MAKE_ARDUINO_PINS(38);
+ MAKE_ARDUINO_PINS(39);
+ MAKE_ARDUINO_PINS(40);
+ MAKE_ARDUINO_PINS(41);
+ MAKE_ARDUINO_PINS(42);
+ MAKE_ARDUINO_PINS(43);
+ MAKE_ARDUINO_PINS(44);
+ MAKE_ARDUINO_PINS(45);
+ MAKE_ARDUINO_PINS(46);
+ MAKE_ARDUINO_PINS(47);
+ MAKE_ARDUINO_PINS(48);
+ MAKE_ARDUINO_PINS(49);
+ MAKE_ARDUINO_PINS(50);
+ MAKE_ARDUINO_PINS(51);
+ MAKE_ARDUINO_PINS(52);
+ MAKE_ARDUINO_PINS(53);
+ #undef MAKE_ARDUINO_PINS
+ } // namespace fast_io
+
+ #define SET_INPUT(pin) fast_io::pin::set_input()
+ #define SET_INPUT_PULLUP(pin) fast_io::pin::set_input(); fast_io::pin::set_high()
+ #define SET_OUTPUT(pin) fast_io::pin::set_output()
+ #define READ(pin) fast_io::pin::read()
+ #define WRITE(pin, value) fast_io::pin::write(value)
+
+ #ifndef pgm_read_word_far
+ #define pgm_read_word_far pgm_read_word
+ #endif
+
+ #ifndef pgm_read_dword_far
+ #define pgm_read_dword_far pgm_read_dword
+ #endif
+
+ #ifndef pgm_read_ptr_far
+ #define pgm_read_ptr_far pgm_read_ptr
+ #endif
+
+ #define SERIAL_ECHO_START()
+ #define SERIAL_ECHOLNPGM(str) Serial.println(F(str))
+ #define SERIAL_ECHOPGM(str) Serial.print(F(str))
+ #define SERIAL_ECHOLNPAIR(str, val) {Serial.print(F(str)); Serial.println(val);}
+ #define SERIAL_ECHOPAIR(str, val) {Serial.print(F(str)); Serial.print(val);}
+
+ #define safe_delay delay
+
+ // Remove compiler warning on an unused variable
+ #ifndef UNUSED
+ #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+ #define UNUSED(X) (void)X
+ #else
+ #define UNUSED(x) ((void)(x))
+ #endif
+ #endif
+#endif //!defined(__MARLIN_FIRMWARE__)
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/bitmap_info.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/bitmap_info.h
new file mode 100644
index 0000000000..2a095c3445
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/bitmap_info.h
@@ -0,0 +1,49 @@
+/*****************
+ * bitmap_info.h *
+ *****************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#ifndef FORCEDINLINE
+ #define FORCEDINLINE __attribute__((always_inline)) inline
+#endif
+
+namespace FTDI {
+ // The following functions *must* be inlined since we are relying on the compiler to do
+ // substitution of the constants from the data structure rather than actually storing
+ // it in PROGMEM (which would fail, since we are not using pgm_read to read them).
+ // Plus, by inlining, all the equations are evaluated at compile-time as everything
+ // should be a constant.
+
+ typedef struct {
+ const uint8_t format;
+ const uint16_t linestride;
+ const uint8_t filter;
+ const uint8_t wrapx;
+ const uint8_t wrapy;
+ const uint32_t RAMG_offset;
+ const uint16_t width;
+ const uint16_t height;
+ } bitmap_info_t;
+
+ FORCEDINLINE uint32_t BITMAP_SOURCE (const bitmap_info_t& info) {return BITMAP_SOURCE (ftdi_memory_map::RAM_G + info.RAMG_offset);};
+ FORCEDINLINE uint32_t BITMAP_LAYOUT (const bitmap_info_t& info) {return BITMAP_LAYOUT (info.format, info.linestride, info.height);};
+ FORCEDINLINE uint32_t BITMAP_SIZE (const bitmap_info_t& info) {return BITMAP_SIZE (info.filter, info.wrapx, info.wrapy, info.width, info.height);}
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.cpp
new file mode 100644
index 0000000000..08d2082020
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.cpp
@@ -0,0 +1,29 @@
+/*************************
+ * command_processor.cpp *
+ *************************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+
+CommandProcessor::btn_style_func_t *CommandProcessor::_btn_style_callback = CommandProcessor::default_button_style_func;
+bool CommandProcessor::is_tracking = false;
+
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.h
new file mode 100644
index 0000000000..4ec54395b2
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/command_processor.h
@@ -0,0 +1,347 @@
+/***********************
+ * command_processor.h *
+ ***********************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+typedef struct {
+ uint32_t bg;
+ uint32_t grad;
+ uint32_t fg;
+ uint32_t rgb;
+} btn_colors;
+
+/**************************** Enhanced Command Processor **************************/
+
+/* The CommandProcessor class wraps the CommandFifo with several features to make
+ * defining user interfaces much easier.
+ *
+ * - Implements chaining on all methods
+ * - Automatically adds text to button, toggle, text and keys.
+ * - Constrains all widgets to fit inside a box for ease of layout.
+ * - Font size is specified using a chained modifier.
+ * - Option argument is given the default OPT_3D value.
+ */
+
+class CommandProcessor : public CLCD::CommandFifo {
+ public:
+ static constexpr uint8_t STYLE_DISABLED = 0x80;
+
+ private:
+ static bool default_button_style_func(CommandProcessor &, uint8_t tag, uint8_t & /*style*/, uint16_t &options, bool) {
+ if (tag != 0 && FTDI::EventLoop::get_pressed_tag() == tag) {
+ options = FTDI::OPT_FLAT;
+ }
+ return false;
+ }
+
+ typedef bool btn_style_func_t(CommandProcessor &cmd, uint8_t tag, uint8_t &style, uint16_t &options, bool post);
+
+ static btn_style_func_t *_btn_style_callback;
+ static bool is_tracking;
+ int8_t _font = 26, _tag = 0;
+ uint8_t _style = 0;
+
+ protected:
+ // Returns the cannonical thickness of a widget (i.e. the height of a toggle element)
+ uint16_t widget_thickness() {
+ CLCD::FontMetrics fm(_font);
+ return fm.height * 20.0/16;
+ }
+
+ FORCEDINLINE void linear_widget_box(int16_t &x, int16_t &y, int16_t &w, int16_t &h, bool tracker = false) {
+ const uint16_t th = widget_thickness()/2;
+ if (w > h) {
+ x += tracker ? th * 2.5 : th;
+ y += h/2 - th/2;
+ w -= tracker ? th * 5.0 : th * 2;
+ h = th;
+ } else {
+ x += w/2 - th/2;
+ y += tracker ? th * 2.5 : th;
+ w = th;
+ h -= tracker ? th * 5.0 : th * 2;
+ }
+ }
+
+ FORCEDINLINE uint16_t circular_widget_box(int16_t &x, int16_t &y, int16_t &w, int16_t &h) {
+ const uint16_t r = min(w,h)/2;
+ x += w/2;
+ y += h/2;
+ w = 1;
+ h = 1;
+ return r;
+ }
+
+ public:
+ // Helper method for setting all colors at once
+ inline CommandProcessor& colors(const btn_colors &colors) {
+ cmd(FTDI::COLOR_RGB(colors.rgb))
+ .gradcolor(colors.grad)
+ .fgcolor(colors.fg)
+ .bgcolor(colors.bg);
+ return *this;
+ }
+
+ inline CommandProcessor& bitmap_size(uint8_t filter, uint8_t wrapx, uint8_t wrapy, uint16_t width, uint16_t height) {
+ cmd(FTDI::BITMAP_SIZE(filter, wrapx, wrapy, width, height));
+ #if FTDI_API_LEVEL >= 810
+ if (FTDI::ftdi_chip >= 810)
+ cmd(FTDI::BITMAP_SIZE_H(width >> 9, height >> 9));
+ #endif
+ return *this;
+ }
+
+ inline CommandProcessor& bitmap_layout(uint8_t format, uint16_t linestride, uint16_t height) {
+ cmd(FTDI::BITMAP_LAYOUT(format, linestride, height));
+ #if FTDI_API_LEVEL >= 810
+ if (FTDI::ftdi_chip >= 810)
+ cmd(FTDI::BITMAP_LAYOUT_H(linestride >> 10, height >> 9));
+ #endif
+ return *this;
+ }
+
+ inline CommandProcessor& set_button_style_callback(const btn_style_func_t *func) {
+ _btn_style_callback = func ? func : default_button_style_func;
+ return *this;
+ }
+
+ inline CommandProcessor& tag (uint8_t tag) {_tag = tag; cmd(FTDI::TAG(tag)); return *this;}
+
+ inline CommandProcessor& font (int16_t font) {_font = font; return *this;}
+
+ inline CommandProcessor& enabled (bool enabled) {
+ if (enabled)
+ _style &= ~STYLE_DISABLED;
+ else
+ _style |= STYLE_DISABLED;
+ return *this;
+ }
+
+ inline CommandProcessor& style (uint8_t style) {
+ _style = (_style & STYLE_DISABLED) | style;
+ return *this;
+ }
+
+ // Wrap all the CommandFifo routines to allow method chaining
+
+ inline CommandProcessor& cmd (uint32_t cmd32) {CLCD::CommandFifo::cmd(cmd32); return *this;}
+ inline CommandProcessor& cmd (void* data, uint16_t len) {CLCD::CommandFifo::cmd(data, len); return *this;}
+ inline CommandProcessor& execute() {CLCD::CommandFifo::execute(); return *this;}
+
+ inline CommandProcessor& fgcolor (uint32_t rgb) {CLCD::CommandFifo::fgcolor(rgb); return *this;}
+ inline CommandProcessor& bgcolor (uint32_t rgb) {CLCD::CommandFifo::bgcolor(rgb); return *this;}
+ inline CommandProcessor& gradcolor(uint32_t rgb) {CLCD::CommandFifo::gradcolor(rgb); return *this;}
+
+ inline CommandProcessor& snapshot (uint32_t ptr) {CLCD::CommandFifo::snapshot(ptr); return *this;}
+
+ inline CommandProcessor& loadimage(uint32_t ptr, uint32_t options)
+ {CLCD::CommandFifo::loadimage(ptr, options); return *this;}
+ inline CommandProcessor& sketch (int16_t x, int16_t y, uint16_t w, uint16_t h, uint32_t ptr, uint16_t format)
+ {CLCD::CommandFifo::sketch(x, y, w, h, ptr, format); return *this;}
+ inline CommandProcessor& screensaver () {CLCD::CommandFifo::screensaver(); return *this;}
+ #if FTDI_API_LEVEL >= 810
+ inline CommandProcessor& setbase (uint8_t base) {CLCD::CommandFifo::setbase(base); return *this;}
+ #endif
+ inline CommandProcessor& loadidentity () {CLCD::CommandFifo::loadidentity(); return *this;}
+ inline CommandProcessor& scale (int32_t sx, int32_t sy) {CLCD::CommandFifo::scale(sx,sy); return *this;}
+ inline CommandProcessor& rotate (int32_t a) {CLCD::CommandFifo::rotate(a); return *this;}
+ inline CommandProcessor& translate(int32_t tx, int32_t ty) {CLCD::CommandFifo::translate(tx,ty); return *this;}
+ inline CommandProcessor& setmatrix () {CLCD::CommandFifo::setmatrix(); return *this;}
+ inline CommandProcessor& stop () {CLCD::CommandFifo::stop(); return *this;}
+
+ inline CommandProcessor& memzero (uint32_t ptr, uint32_t size)
+ {CLCD::CommandFifo::memzero(ptr, size); return *this;}
+ inline CommandProcessor& memset (uint32_t ptr, uint32_t val, uint32_t size)
+ {CLCD::CommandFifo::memset(ptr, val, size); return *this;}
+ inline CommandProcessor& memcpy (uint32_t src, uint32_t dst, uint32_t size)
+ {CLCD::CommandFifo::memcpy(src, dst, size); return *this;}
+ inline CommandProcessor& memcrc (uint32_t ptr, uint32_t num, uint32_t result)
+ {CLCD::CommandFifo::memcrc(ptr, num, result); return *this;}
+ inline CommandProcessor& memwrite (uint32_t ptr, uint32_t value)
+ {CLCD::CommandFifo::memwrite(ptr, value); return *this;}
+ inline CommandProcessor& inflate (uint32_t ptr)
+ {CLCD::CommandFifo::inflate(ptr); return *this;}
+ inline CommandProcessor& getptr (uint32_t result)
+ {CLCD::CommandFifo::getptr(result); return *this;}
+ inline CommandProcessor& getprops (uint32_t ptr, uint32_t width, uint32_t height)
+ {CLCD::CommandFifo::getprops(ptr, width, height); return *this;}
+
+ #if FTDI_API_LEVEL >= 810
+ inline CommandProcessor& setbitmap (uint32_t ptr, uint16_t fmt, uint16_t w, uint16_t h)
+ {CLCD::CommandFifo::setbitmap(ptr,fmt,w,h); return *this;}
+ inline CommandProcessor& snapshot2 (uint32_t fmt, uint32_t ptr, int16_t x, int16_t y, uint16_t w, uint16_t h)
+ {CLCD::CommandFifo::snapshot2(fmt,ptr,x,y,w,h); return *this;}
+ inline CommandProcessor& mediafifo (uint32_t p, uint32_t s) {CLCD::CommandFifo::mediafifo(p, s); return *this;}
+ inline CommandProcessor& playvideo(uint32_t options) {CLCD::CommandFifo::playvideo(options); return *this;}
+ #endif
+
+ inline CommandProcessor& gradient(int16_t x0, int16_t y0, uint32_t rgb0, int16_t x1, int16_t y1, uint32_t rgb1)
+ {CLCD::CommandFifo::gradient(x0,y0,rgb0,x1,y1,rgb1); return *this;}
+
+ inline CommandProcessor& rectangle(int16_t x, int16_t y, int16_t w, int16_t h) {
+ using namespace FTDI;
+ CLCD::CommandFifo::cmd(BEGIN(RECTS));
+ CLCD::CommandFifo::cmd(VERTEX2F(x*16,y*16));
+ CLCD::CommandFifo::cmd(VERTEX2F((x+w)*16,(y+h)*16));
+ return *this;
+ }
+
+ template
+ FORCEDINLINE CommandProcessor& toggle(int16_t x, int16_t y, int16_t w, int16_t h, T text, bool state, uint16_t options = FTDI::OPT_3D) {
+ CLCD::FontMetrics fm(_font);
+ const int16_t widget_h = fm.height * 20.0/16;
+ //const int16_t outer_bar_r = widget_h / 2;
+ //const int16_t knob_r = outer_bar_r - 1.5;
+ // The y coordinate of the toggle is the baseline of the text,
+ // so we must introduce a fudge factor based on the line height to
+ // actually center the control.
+ const int16_t fudge_y = fm.height*5/16;
+ CLCD::CommandFifo::toggle(x + h/2, y + h/2 - widget_h/2 + fudge_y, w - h, _font, options, state);
+ CLCD::CommandFifo::str(text);
+ return *this;
+ }
+
+ // Contrained drawing routines. These constrain the widget inside a box for easier layout.
+ // The FORCEDINLINE ensures that the code is inlined so that all the math is done at compile time.
+
+ FORCEDINLINE CommandProcessor& track_linear(int16_t x, int16_t y, int16_t w, int16_t h, int16_t tag) {
+ linear_widget_box(x, y, w, h, true);
+ CLCD::CommandFifo::track(x, y, w, h, tag);
+ is_tracking = true;
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& track_circular(int16_t x, int16_t y, int16_t w, int16_t h, int16_t tag) {
+ circular_widget_box(x,y, w, h);
+ CLCD::CommandFifo::track(x, y, w, h, tag);
+ is_tracking = true;
+ return *this;
+ }
+
+ uint8_t track_tag (uint16_t &value) {
+ if (is_tracking) {
+ if (FTDI::EventLoop::is_touch_held()) {
+ return CLCD::get_tracker(value);
+ } else {
+ CLCD::CommandFifo::track(0, 0, 0, 0, 0);
+ CLCD::CommandFifo::execute();
+ is_tracking = false;
+ }
+ }
+ return 0;
+ }
+
+ FORCEDINLINE CommandProcessor& clock(int16_t x, int16_t y, int16_t w, int16_t h, int16_t hr, int16_t m, int16_t s, int16_t ms, uint16_t options = FTDI::OPT_3D) {
+ const uint16_t r = circular_widget_box(x, y, w, h);
+ CLCD::CommandFifo::clock(x, y, r, options, hr, m, s, ms);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& gauge(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t major, uint16_t minor, uint16_t val, uint16_t range, uint16_t options = FTDI::OPT_3D) {
+ const uint16_t r = circular_widget_box(x, y, w, h);
+ CLCD::CommandFifo::gauge(x, y, r, options, major, minor, val, range);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& dial(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t options = FTDI::OPT_3D) {
+ const uint16_t r = circular_widget_box(x, y, w, h);
+ CLCD::CommandFifo::dial(x, y, r, options, val);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& slider(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t range, uint16_t options = FTDI::OPT_3D) {
+ linear_widget_box(x, y, w, h);
+ CLCD::CommandFifo::slider(x, y, w, h, options, val, range);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& progress(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t range, uint16_t options = FTDI::OPT_3D) {
+ linear_widget_box(x, y, w, h);
+ CLCD::CommandFifo::progress(x, y, w, h, options, val, range);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& scrollbar(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t val, uint16_t size, uint16_t range, uint16_t options = 0) {
+ linear_widget_box(x, y, w, h);
+ CLCD::CommandFifo::scrollbar(x, y, w, h, options, val, size, range);
+ return *this;
+ }
+
+ CommandProcessor& number(int16_t x, int16_t y, int16_t w, int16_t h, int32_t n, uint16_t options = FTDI::OPT_CENTER) {
+ using namespace FTDI;
+ CLCD::CommandFifo::number(
+ x + ((options & OPT_CENTERX) ? w/2 : ((options & OPT_RIGHTX) ? w : 0)),
+ y + ((options & OPT_CENTERY) ? h/2 : h),
+ _font, options, n);
+ return *this;
+ }
+
+ template FORCEDINLINE
+ CommandProcessor& text(int16_t x, int16_t y, int16_t w, int16_t h, T text, uint16_t options = FTDI::OPT_CENTER) {
+ using namespace FTDI;
+ CLCD::CommandFifo::text(
+ x + ((options & OPT_CENTERX) ? w/2 : ((options & OPT_RIGHTX) ? w : 0)),
+ y + ((options & OPT_CENTERY) ? h/2 : h),
+ _font, options);
+ CLCD::CommandFifo::str(text);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& icon(int16_t x, int16_t y, int16_t w, int16_t h, const FTDI::bitmap_info_t& info, const float scale = 1) {
+ using namespace FTDI;
+ cmd(BEGIN(BITMAPS));
+ if (scale != 1) {
+ cmd(BITMAP_TRANSFORM_A(uint32_t(float(256)/scale)));
+ cmd(BITMAP_TRANSFORM_E(uint32_t(float(256)/scale)));
+ }
+ cmd(BITMAP_SIZE(info.filter, info.wrapx, info.wrapy, info.width*scale, info.height*scale));
+ cmd(VERTEX2F((x + w/2 - info.width*scale/2)*16, (y + h/2 - info.height*scale/2)*16));
+ if (scale != 1) {
+ cmd(BITMAP_TRANSFORM_A(256));
+ cmd(BITMAP_TRANSFORM_E(256));
+ }
+ return *this;
+ }
+
+ template
+ CommandProcessor& button(int16_t x, int16_t y, int16_t w, int16_t h, T text, uint16_t options = FTDI::OPT_3D) {
+ using namespace FTDI;
+ bool styleModified = false;
+ if (_btn_style_callback) styleModified = _btn_style_callback(*this, _tag, _style, options, false);
+ CLCD::CommandFifo::button(x, y, w, h, _font, options);
+ CLCD::CommandFifo::str(text);
+ if (_btn_style_callback && styleModified) _btn_style_callback(*this, _tag, _style, options, true);
+ return *this;
+ }
+
+ template
+ CommandProcessor& keys(int16_t x, int16_t y, int16_t w, int16_t h, T keys, uint16_t options = FTDI::OPT_3D) {
+ CLCD::CommandFifo::keys(x, y, w, h, _font, options);
+ CLCD::CommandFifo::str(keys);
+ return *this;
+ }
+
+ FORCEDINLINE CommandProcessor& spinner(int16_t x, int16_t y, int16_t w, int16_t h, uint16_t style = 0, uint16_t scale = 0) {
+ circular_widget_box(x, y, w, h);
+ CLCD::CommandFifo::spinner(x, y, style, scale);
+ return *this;
+ }
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.cpp
new file mode 100644
index 0000000000..fd6fde5f58
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.cpp
@@ -0,0 +1,176 @@
+/****************
+ * dl_cache.cpp *
+ ****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+
+/* The Display List Cache mechanism stores the display list corresponding
+ * to a menu into RAM_G so that on subsequent calls drawing the menu does
+ * not require as much SPI traffic.
+ *
+ * Layout of Cache memory:
+ *
+ * The cache memory begins with a table at
+ * DL_CACHE_START: each table entry contains
+ * an address and size for a cached DL slot.
+ *
+ * Immediately following the table is the
+ * DL_FREE_ADDR, which points to free cache
+ * space; following this is occupied DL space,
+ * and after that free space that is yet to
+ * be used.
+ *
+ * location data sizeof
+ *
+ * DL_CACHE_START slot0_addr 4
+ * slot0_size 4
+ * slot1_addr 4
+ * slot1_size 4
+ * ...
+ * slotN_addr 4
+ * slotN_size 4
+ * DL_FREE_ADDR dl_free_ptr 4
+ * cached data
+ * ...
+ * dl_free_ptr empty space
+ * ...
+ */
+
+#define DL_CACHE_START MAP::RAM_G_SIZE - 0xFFFF
+#define DL_FREE_ADDR DL_CACHE_START + DL_CACHE_SLOTS * 8
+
+using namespace FTDI;
+
+// The init function ensures all cache locations are marked as empty
+
+void DLCache::init() {
+ CLCD::mem_write_32(DL_FREE_ADDR, DL_FREE_ADDR + 4);
+ for(uint8_t slot = 0; slot < DL_CACHE_SLOTS; slot++) {
+ save_slot(slot, 0, 0);
+ }
+}
+
+bool DLCache::has_data() {
+ return dl_size != 0;
+}
+
+bool DLCache::wait_until_idle() {
+ const unsigned long startTime = millis();
+ do {
+ if ((millis() - startTime) > 250) {
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Timeout on DL_Cache::Wait_Until_Idle()");
+ CLCD::CommandFifo::reset();
+ return false;
+ }
+ #ifdef __MARLIN_FIRMWARE__
+ ExtUI::yield();
+ #endif
+ } while (CLCD::CommandFifo::is_processing());
+ return true;
+}
+
+/* This caches the current display list in RAMG so
+ * that it can be appended later. The memory is
+ * dynamically allocated following DL_FREE_ADDR.
+ *
+ * If num_bytes is provided, then that many bytes
+ * will be reserved so that the cache may be re-written
+ * later with potentially a bigger DL.
+ */
+
+bool DLCache::store(uint32_t num_bytes /* = 0*/) {
+ CLCD::CommandFifo cmd;
+
+ // Execute any commands already in the FIFO
+ cmd.execute();
+ if (!wait_until_idle())
+ return false;
+
+ // Figure out how long the display list is
+ uint32_t new_dl_size = CLCD::mem_read_32(REG::CMD_DL) & 0x1FFF;
+ uint32_t free_space = 0;
+ uint32_t dl_alloc = 0;
+
+ if (dl_addr == 0) {
+ // If we are allocating new space...
+ dl_addr = CLCD::mem_read_32(DL_FREE_ADDR);
+ free_space = MAP::RAM_G_SIZE - dl_addr;
+ dl_alloc = num_bytes ? num_bytes : new_dl_size;
+ dl_size = new_dl_size;
+ } else {
+ // Otherwise, we can only store as much space
+ // as was previously allocated.
+ free_space = num_bytes ? num_bytes : dl_size;
+ dl_alloc = 0;
+ dl_size = new_dl_size;
+ }
+
+ if (dl_size > free_space) {
+ // Not enough memory to cache the display list.
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Not enough space in GRAM to cache display list, free space: ", free_space);
+ SERIAL_ECHOLNPAIR(" Required: ", dl_size);
+ #endif
+ return false;
+ } else {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Saving DL to RAMG cache, bytes: ", dl_size);
+ SERIAL_ECHOLNPAIR(" Free space: ", free_space);
+ #endif
+ cmd.memcpy(dl_addr, MAP::RAM_DL, dl_size);
+ cmd.execute();
+ save_slot(dl_slot, dl_addr, dl_size);
+ if (dl_alloc > 0) {
+ // If we allocated space dynamically, then adjust dl_free_addr.
+ CLCD::mem_write_32(DL_FREE_ADDR, dl_addr + dl_alloc);
+ }
+ return true;
+ }
+}
+
+void DLCache::save_slot(uint8_t dl_slot, uint32_t dl_addr, uint32_t dl_size) {
+ CLCD::mem_write_32(DL_CACHE_START + dl_slot * 8 + 0, dl_addr);
+ CLCD::mem_write_32(DL_CACHE_START + dl_slot * 8 + 4, dl_size);
+}
+
+void DLCache::load_slot() {
+ dl_addr = CLCD::mem_read_32(DL_CACHE_START + dl_slot * 8 + 0);
+ dl_size = CLCD::mem_read_32(DL_CACHE_START + dl_slot * 8 + 4);
+}
+
+void DLCache::append() {
+ CLCD::CommandFifo cmd;
+ cmd.append(dl_addr, dl_size);
+ #ifdef UI_FRAMEWORK_DEBUG
+ cmd.execute();
+ wait_until_idle();
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Appending to DL from RAMG cache, bytes: ", dl_size);
+ SERIAL_ECHOLNPAIR(" REG_CMD_DL: ", CLCD::mem_read_32(REG::CMD_DL));
+ #endif
+}
+
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.h
new file mode 100644
index 0000000000..f025b6a18d
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/dl_cache.h
@@ -0,0 +1,69 @@
+/**************
+ * dl_cache.h *
+ **************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/******************* DISPLAY LIST CACHE MANAGEMENT ************************/
+/* The Display List Cache mechanism stores the display list corresponding
+ * to a menu into RAM_G so that on subsequent calls drawing the menu does
+ * not require as much SPI traffic. Dynamic content, such as indicators,
+ * should not be cached.
+ *
+ * The DLCache can be used like so:
+ *
+ * void some_function() {
+ * DLCache dlcache(UNIQUE_ID);
+ *
+ * if (dlcache.hasData()) {
+ * dlcache.append();
+ * } else {
+ * // Add stuff to the DL
+ * dlcache.store();
+ * }
+ */
+class DLCache {
+ private:
+ typedef FTDI::ftdi_registers REG;
+ typedef FTDI::ftdi_memory_map MAP;
+
+ uint8_t dl_slot;
+ uint32_t dl_addr;
+ uint16_t dl_size;
+
+ void load_slot();
+ static void save_slot(uint8_t dl_slot, uint32_t dl_addr, uint32_t dl_size);
+
+ bool wait_until_idle();
+
+ public:
+ static void init();
+
+ DLCache(uint8_t slot) {
+ dl_slot = slot;
+ load_slot();
+ }
+
+ bool has_data();
+ bool store(uint32_t num_bytes = 0);
+ void append();
+};
+
+#define DL_CACHE_SLOTS 250
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.cpp
new file mode 100644
index 0000000000..a9194fdaba
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.cpp
@@ -0,0 +1,230 @@
+/******************
+ * event_loop.cpp *
+ ******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+using namespace FTDI;
+
+enum {
+ UNPRESSED = 0x00
+};
+
+tiny_timer_t touch_timer;
+UIData::flags_t UIData::flags;
+uint8_t pressed_tag = UNPRESSED;
+
+uint8_t UIData::get_persistent_data_mask() {
+ // A bit mask for flags that should be stored to the EEPROM.
+ // Others are considered temporarily values that need not be
+ // saved.
+ constexpr flags_t persistent_flags = {
+ bits: {
+ touch_start_sound: true,
+ touch_end_sound: true,
+ touch_repeat_sound: true,
+ show_animations: true
+ }
+ };
+ return persistent_flags.value;
+}
+
+void UIData::reset_persistent_data() {
+ // Default values for persistent data
+ constexpr flags_t default_flags = {
+ bits: {
+ touch_start_sound: true,
+ touch_end_sound: true,
+ touch_repeat_sound: true,
+ show_animations: true,
+ touch_debouncing: false,
+ ignore_unpress: false
+ }
+ };
+ flags.value = default_flags.value;
+}
+
+uint8_t UIData::get_persistent_data() {
+ return flags.value & get_persistent_data_mask();
+}
+
+void UIData::set_persistent_data(uint8_t value) {
+ flags.value = value & get_persistent_data_mask();
+}
+
+
+void UIData::enable_touch_sounds(bool enabled) {
+ UIData::flags.bits.touch_start_sound = enabled;
+ UIData::flags.bits.touch_end_sound = enabled;
+ UIData::flags.bits.touch_repeat_sound = enabled;
+}
+
+bool UIData::touch_sounds_enabled() {
+ return UIData::flags.bits.touch_start_sound || UIData::flags.bits.touch_end_sound || UIData::flags.bits.touch_repeat_sound;
+}
+
+void UIData::enable_animations(bool enabled) {
+ UIData::flags.bits.show_animations = enabled;
+}
+
+bool UIData::animations_enabled() {
+ return UIData::flags.bits.show_animations;
+}
+
+namespace FTDI {
+ uint8_t EventLoop::get_pressed_tag() {
+ return pressed_tag;
+ }
+
+ bool EventLoop::is_touch_held() {
+ return pressed_tag != 0;
+ }
+
+ /**
+ * process_events(): Process events from the touch panel.
+ *
+ * This function consists of a state machine that accomplishes the following:
+ *
+ * - Reads the tag register from the touch panel
+ * - Dispatches onTouchStart and onTouchEnd events to the active screen.
+ * - Handles auto-repetition by sending onTouchHeld to the active screen periodically.
+ * - Plays touch feedback "click" sounds when appropriate.
+ * - Performs debouncing to supress spurious touch events.
+ *
+ */
+ void EventLoop::process_events() {
+ // If the LCD is processing commands, don't check
+ // for tags since they may be changing and could
+ // cause spurious events.
+ if (!touch_timer.elapsed(TOUCH_UPDATE_INTERVAL) || CLCD::CommandFifo::is_processing()) {
+ return;
+ }
+
+ const uint8_t tag = CLCD::get_tag();
+
+ switch (pressed_tag) {
+ case UNPRESSED:
+ if (tag != 0) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPAIR("Touch start: ", tag);
+ #endif
+
+ pressed_tag = tag;
+ current_screen.onRefresh();
+
+ // When the user taps on a button, activate the onTouchStart handler
+ const uint8_t lastScreen = current_screen.getScreen();
+
+ if (current_screen.onTouchStart(tag)) {
+ touch_timer.start();
+ if (UIData::flags.bits.touch_start_sound) sound.play(press_sound);
+ }
+
+ if (lastScreen != current_screen.getScreen()) {
+ // In the case in which a touch event triggered a new screen to be
+ // drawn, we don't issue a touchEnd since it would be sent to the
+ // wrong screen.
+ UIData::flags.bits.ignore_unpress = true;
+ } else {
+ UIData::flags.bits.ignore_unpress = false;
+ }
+ } else {
+ touch_timer.start();
+ }
+ break;
+ default: // PRESSED
+ if (!UIData::flags.bits.touch_debouncing) {
+ if (tag == pressed_tag) {
+ // The user is holding down a button.
+ if (touch_timer.elapsed(1000 / TOUCH_REPEATS_PER_SECOND) && current_screen.onTouchHeld(tag)) {
+ current_screen.onRefresh();
+ if (UIData::flags.bits.touch_repeat_sound) sound.play(repeat_sound);
+ touch_timer.start();
+ }
+ }
+ else if (tag == 0) {
+ touch_timer.start();
+ UIData::flags.bits.touch_debouncing = true;
+ }
+ }
+
+ else {
+ // Debouncing...
+
+ if (tag == pressed_tag) {
+ // If while debouncing, we detect a press, then cancel debouncing.
+ UIData::flags.bits.touch_debouncing = false;
+ }
+
+ else if (touch_timer.elapsed(DEBOUNCE_PERIOD)) {
+ UIData::flags.bits.touch_debouncing = false;
+
+ if (UIData::flags.bits.ignore_unpress) {
+ UIData::flags.bits.ignore_unpress = false;
+ pressed_tag = UNPRESSED;
+ break;
+ }
+
+ if (UIData::flags.bits.touch_end_sound) sound.play(unpress_sound);
+
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPAIR("Touch end: ", tag);
+ #endif
+
+ const uint8_t saved_pressed_tag = pressed_tag;
+ pressed_tag = UNPRESSED;
+ current_screen.onTouchEnd(saved_pressed_tag);
+ current_screen.onRefresh();
+ }
+ }
+ break;
+ } // switch (pressed_tag)
+
+ } // processEvents()
+
+ void EventLoop::setup() {
+ CLCD::init();
+ DLCache::init();
+ UIData::reset_persistent_data();
+ current_screen.start();
+ }
+
+ void EventLoop::loop() {
+ sound.onIdle();
+
+ /**
+ * Guard against re-entry of UI methods, which can
+ * crash. Re-entry can happen because some functions
+ * (e.g. planner.synchronize) call idle().
+ */
+ if (!UIData::flags.bits.prevent_reentry) {
+ UIData::flags.bits.prevent_reentry = true;
+ current_screen.onIdle();
+ process_events();
+ UIData::flags.bits.prevent_reentry = false;
+ }
+ }
+} // namespace FTDI
+
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.h
new file mode 100644
index 0000000000..7eeea9c815
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/event_loop.h
@@ -0,0 +1,74 @@
+/****************
+ * event_loop.h *
+ ****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#define STATUS_UPDATE_INTERVAL 1000
+#define TOUCH_UPDATE_INTERVAL 50
+#define TOUCH_REPEATS_PER_SECOND 4
+#define DEBOUNCE_PERIOD 150
+
+class UIData {
+ private:
+ typedef union {
+ struct {
+ uint8_t touch_start_sound : 1;
+ uint8_t touch_end_sound : 1;
+ uint8_t touch_repeat_sound : 1;
+ uint8_t show_animations : 1;
+ uint8_t touch_debouncing : 1;
+ uint8_t ignore_unpress : 1;
+ uint8_t prevent_reentry : 1;
+ } bits;
+ uint8_t value;
+ } flags_t;
+
+ public:
+ static flags_t flags;
+
+ static uint8_t get_persistent_data_mask();
+ static uint8_t get_persistent_data();
+ static void set_persistent_data(uint8_t value);
+ static void reset_persistent_data();
+
+ static void enable_touch_sounds(bool enabled);
+ static bool touch_sounds_enabled();
+ static void enable_animations(bool enabled);
+ static bool animations_enabled();
+};
+
+namespace FTDI {
+ class EventLoop {
+ private:
+ static constexpr FTDI::effect_t press_sound = FTDI::CHACK;
+ static constexpr FTDI::effect_t repeat_sound = FTDI::CHACK;
+ static constexpr FTDI::effect_t unpress_sound = FTDI::POP;
+ static void process_events();
+
+ public:
+ static void setup();
+ static void loop();
+
+ static uint8_t get_pressed_tag();
+ static bool is_touch_held();
+ };
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h
new file mode 100644
index 0000000000..43e390c1ad
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/ftdi_extended.h
@@ -0,0 +1,45 @@
+/*******************
+ * ftdi_extended.h *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2019 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 201( - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "../compat.h"
+#include "../basic/ftdi_basic.h"
+
+#if !defined(__MARLIN_FIRMWARE__)
+ #define FTDI_EXTENDED
+#endif
+
+#ifdef FTDI_EXTENDED
+ #include "rgb_t.h"
+ #include "bitmap_info.h"
+ #include "tiny_timer.h"
+ #include "grid_layout.h"
+ #include "dl_cache.h"
+ #include "screen_types.h"
+ #include "event_loop.h"
+ #include "command_processor.h"
+ #include "sound_player.h"
+ #include "sound_list.h"
+ #include "polygon.h"
+ #include "text_box.h"
+#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/grid_layout.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/grid_layout.h
new file mode 100644
index 0000000000..ec8154b22f
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/grid_layout.h
@@ -0,0 +1,98 @@
+/*****************
+ * grid_layout.h *
+ *****************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/* The grid layout macros allow buttons to be arranged on a grid so
+ * that their locations become independent of the display size. The
+ * layout model is similar to that of HTML TABLEs.
+ *
+ * These macros are meant to be evaluated into constants at compile
+ * time, so resolution independence can be as efficient as using
+ * hard-coded coordinates.
+ */
+
+// Margin defines the margin (in pixels) on each side of a button in
+// the layout
+
+#ifdef TOUCH_UI_800x480
+ #define MARGIN_L 5
+ #define MARGIN_R 5
+ #define MARGIN_T 5
+ #define MARGIN_B 5
+ #define MARGIN_DEFAULT 5
+#else
+ #define MARGIN_L 3
+ #define MARGIN_R 3
+ #define MARGIN_T 3
+ #define MARGIN_B 3
+ #define MARGIN_DEFAULT 3
+#endif
+
+// EDGE_R adds some black space on the right edge of the display
+// This shifts some of the screens left to visually center them.
+
+#define EDGE_R 0
+
+// GRID_X and GRID_Y computes the positions of the divisions on
+// the layout grid.
+#define GRID_X(x) ((x)*(FTDI::display_width-EDGE_R)/GRID_COLS)
+#define GRID_Y(y) ((y)*FTDI::display_height/GRID_ROWS)
+
+// BTN_X, BTN_Y, BTN_W and BTN_X returns the top-left and width
+// and height of a button, taking into account the button margins.
+
+#define BTN_X(x) (GRID_X((x)-1) + MARGIN_L)
+#define BTN_Y(y) (GRID_Y((y)-1) + MARGIN_T)
+#define BTN_W(w) (GRID_X(w) - MARGIN_L - MARGIN_R)
+#define BTN_H(h) (GRID_Y(h) - MARGIN_T - MARGIN_B)
+
+// Abbreviations for common phrases, to allow a button to be
+// defined in one line of source.
+#define BTN_POS(x,y) BTN_X(x), BTN_Y(y)
+#define BTN_SIZE(w,h) BTN_W(w), BTN_H(h)
+
+// Draw a reference grid for ease of spacing out widgets.
+#define DRAW_LAYOUT_GRID \
+ { \
+ cmd.cmd(LINE_WIDTH(4)); \
+ for(int i = 1; i <= GRID_COLS; i++) { \
+ cmd.cmd(BEGIN(LINES)); \
+ cmd.cmd(VERTEX2F(GRID_X(i) *16, 0 *16)); \
+ cmd.cmd(VERTEX2F(GRID_X(i) *16, FTDI::display_height *16)); \
+ } \
+ for(int i = 1; i < GRID_ROWS; i++) { \
+ cmd.cmd(BEGIN(LINES)); \
+ cmd.cmd(VERTEX2F(0 *16, GRID_Y(i) *16)); \
+ cmd.cmd(VERTEX2F(FTDI::display_width *16, GRID_Y(i) *16)); \
+ } \
+ cmd.cmd(LINE_WIDTH(16)); \
+ }
+
+namespace FTDI {
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr uint16_t display_width = Vsize;
+ constexpr uint16_t display_height = Hsize;
+ #else
+ constexpr uint16_t display_width = Hsize;
+ constexpr uint16_t display_height = Vsize;
+ #endif
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/polygon.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/polygon.h
new file mode 100644
index 0000000000..4560996da7
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/polygon.h
@@ -0,0 +1,96 @@
+/*************
+ * polygon.h *
+ *************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/**
+ * The Polygon class helps drawing filled or stroked polygons on the FTDI EVE:
+ *
+ * CommandProcessor cmd;
+ * cmd.cmd(COLOR_RGB(0x00FF00));
+ *
+ * Polygon p(cmd);
+ * p.begin_fill();
+ * p.begin_loop();
+ * p(10,10);
+ * p(20,10);
+ * p(20,20);
+ * p(10,20);
+ * p.end_loop();
+ * p.begin_loop();
+ * ... // Additional closed paths
+ * p.end_loop();
+ * ...
+ * p.end_fill();
+ *
+ * Based on the example from "Applicaton Note AN_334, FT801 Polygon Application":
+ *
+ * https://brtchip.com/wp-content/uploads/Support/Documentation/Application_Notes/ICs/EVE/AN_334-FT801_Polygon_Application.pdf
+ */
+
+namespace FTDI {
+ class Polygon {
+ private:
+ FTDI::begin_t path_initiator = FTDI::LINE_STRIP;
+
+ public:
+ CommandProcessor &cmd;
+
+ Polygon(CommandProcessor &c) : cmd(c) {}
+
+ void begin_fill() {
+ using namespace FTDI;
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(TAG_MASK(0));
+ cmd.cmd(CLEAR(0,1,0));
+ cmd.cmd(COLOR_MASK(0,0,0,0));
+ cmd.cmd(STENCIL_OP(STENCIL_OP_KEEP, STENCIL_OP_INVERT));
+ cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_ALWAYS, 255, 255));
+ // Drawing the edge strip along scan lines
+ // seems to yield the best performance
+ #ifdef TOUCH_UI_PORTRAIT
+ path_initiator = EDGE_STRIP_B;
+ #else
+ path_initiator = EDGE_STRIP_R;
+ #endif
+ }
+
+ // Specify a clipping rectangle to paint fewer pixels and reduce rendering time, otherwise all pixels will be painted.
+ void end_fill(const int16_t x1 = 0, const int16_t y1 = 0, const int16_t x2 = display_width * 16, const int16_t y2 = display_height * 16) {
+ using namespace FTDI;
+ cmd.cmd(RESTORE_CONTEXT());
+
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_NOTEQUAL, 0, 255));
+ cmd.cmd(BEGIN(RECTS));
+ cmd.cmd(VERTEX2F(x1, y1));
+ cmd.cmd(VERTEX2F(x2, y2));
+ cmd.cmd(RESTORE_CONTEXT());
+ }
+
+ void begin_stroke() {path_initiator = FTDI::LINE_STRIP;}
+ void begin_loop() {cmd.cmd(FTDI::BEGIN(path_initiator));}
+ void end_stroke() {}
+ void end_loop() {}
+
+ void operator()(const uint16_t x, const uint16_t y) {cmd.cmd(FTDI::VERTEX2F(x, y));}
+ };
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/rgb_t.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/rgb_t.h
new file mode 100644
index 0000000000..07ee957f48
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/rgb_t.h
@@ -0,0 +1,44 @@
+/***********
+ * rgb_t.h *
+ ***********/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+struct rgb_t {
+ union {
+ struct {
+ uint8_t b,g,r,a;
+ };
+ uint32_t packed;
+ };
+
+ rgb_t() : packed(0) {}
+ rgb_t(uint32_t rgb) : packed(rgb) {}
+ rgb_t(uint8_t r, uint8_t g, uint8_t b) : b(b), g(g), r(r), a(0) {}
+ operator uint32_t() const {return packed;};
+
+ static void lerp(float t, const rgb_t a, const rgb_t b, rgb_t &c) {
+ c.r = a.r + t * (b.r - a.r);
+ c.g = a.g + t * (b.g - a.g);
+ c.b = a.b + t * (b.b - a.b);
+ }
+
+ uint8_t luminance() const {return 0.299*r + 0.587*g + 0.114*b;}
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.cpp
new file mode 100644
index 0000000000..7dba952a0a
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.cpp
@@ -0,0 +1,106 @@
+/******************
+ * screen_types.h *
+ ******************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+
+/********************** VIRTUAL DISPATCH DATA TYPE ******************************/
+
+uint8_t ScreenRef::lookupScreen(onRedraw_func_t onRedraw_ptr) {
+ for(uint8_t type = 0; type < functionTableSize; type++) {
+ if (GET_METHOD(type, onRedraw) == onRedraw_ptr) {
+ return type;
+ }
+ }
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Screen not found: ", (uintptr_t) onRedraw_ptr);
+ #endif
+ return 0xFF;
+}
+
+void ScreenRef::setScreen(onRedraw_func_t onRedraw_ptr) {
+ uint8_t type = lookupScreen(onRedraw_ptr);
+ if (type != 0xFF) {
+ setType(type);
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPAIR("New screen: ", type);
+ #endif
+ }
+}
+
+void ScreenRef::initializeAll() {
+ for(uint8_t type = 0; type < functionTableSize; type++) {
+ GET_METHOD(type, onStartup)();
+ }
+}
+
+/********************** SCREEN STACK ******************************/
+
+void ScreenStack::start() {
+ initializeAll();
+ onEntry();
+}
+
+void ScreenStack::push(onRedraw_func_t onRedraw_ptr) {
+ stack[3] = stack[2];
+ stack[2] = stack[1];
+ stack[1] = stack[0];
+ stack[0] = lookupScreen(onRedraw_ptr);
+}
+
+void ScreenStack::push() {
+ stack[3] = stack[2];
+ stack[2] = stack[1];
+ stack[1] = stack[0];
+ stack[0] = getType();
+}
+
+void ScreenStack::pop() {
+ setType(stack[0]);
+ forget();
+}
+
+void ScreenStack::forget() {
+ stack[0] = stack[1];
+ stack[1] = stack[2];
+ stack[2] = stack[3];
+ stack[3] = 0;
+}
+
+void ScreenStack::goTo(onRedraw_func_t s) {
+ push();
+ onExit();
+ setScreen(s);
+ onEntry();
+}
+
+void ScreenStack::goBack() {
+ onExit();
+ pop();
+ onEntry();
+}
+
+ScreenStack current_screen;
+
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.h
new file mode 100644
index 0000000000..5550314942
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/screen_types.h
@@ -0,0 +1,215 @@
+/********************
+ * screen_types.cpp *
+ ********************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+typedef enum {
+ BACKGROUND = 1,
+ FOREGROUND = 2,
+ BOTH = 3
+} draw_mode_t;
+
+ /********************** VIRTUAL DISPATCH DATA TYPE ******************************/
+
+// True virtual classes are extremely expensive on the Arduino
+// as the compiler stores the virtual function tables in RAM.
+// We invent a data type called ScreenRef that gives us
+// polymorphism by mapping an ID to virtual methods on various
+// classes. This works by keeping a table in PROGMEM of pointers
+// to static methods.
+
+#define DECL_SCREEN(className) { \
+ className::onStartup, \
+ className::onEntry, \
+ className::onExit, \
+ className::onIdle, \
+ className::onRefresh, \
+ className::onRedraw, \
+ className::onTouchStart, \
+ className::onTouchHeld, \
+ className::onTouchEnd \
+}
+
+#define GET_METHOD(type, method) reinterpret_cast(pgm_read_ptr_far(&functionTable[type].method##_ptr))
+#define SCREEN_TABLE PROGMEM const ScreenRef::table_t ScreenRef::functionTable[] =
+#define SCREEN_TABLE_POST const uint8_t ScreenRef::functionTableSize = sizeof(ScreenRef::functionTable)/sizeof(ScreenRef::functionTable[0]);
+
+class ScreenRef {
+ protected:
+ typedef void onStartup_func_t(void);
+ typedef void onEntry_func_t(void);
+ typedef void onExit_func_t(void);
+ typedef void onIdle_func_t(void);
+ typedef void onRefresh_func_t(void);
+ typedef void onRedraw_func_t(draw_mode_t);
+ typedef bool onTouchStart_func_t(uint8_t);
+ typedef bool onTouchHeld_func_t(uint8_t);
+ typedef bool onTouchEnd_func_t(uint8_t);
+
+ private:
+ typedef struct {
+ onStartup_func_t *onStartup_ptr;
+ onEntry_func_t *onEntry_ptr;
+ onExit_func_t *onExit_ptr;
+ onIdle_func_t *onIdle_ptr;
+ onRefresh_func_t *onRefresh_ptr;
+ onRedraw_func_t *onRedraw_ptr;
+ onTouchStart_func_t *onTouchStart_ptr;
+ onTouchHeld_func_t *onTouchHeld_ptr;
+ onTouchEnd_func_t *onTouchEnd_ptr;
+ } table_t;
+
+ uint8_t type = 0;
+ static PROGMEM const table_t functionTable[];
+ static const uint8_t functionTableSize;
+
+ public:
+ uint8_t getType() {return type;}
+
+ void setType(uint8_t t) {
+ type = t;
+ }
+
+ uint8_t lookupScreen(onRedraw_func_t onRedraw_ptr);
+
+ void setScreen(onRedraw_func_t onRedraw_ptr);
+
+ void onStartup() {GET_METHOD(type, onStartup)();}
+ void onEntry() {GET_METHOD(type, onEntry)();}
+ void onExit() {GET_METHOD(type, onExit)();}
+ void onIdle() {GET_METHOD(type, onIdle)();}
+ void onRefresh() {GET_METHOD(type, onRefresh)();}
+ void onRedraw(draw_mode_t dm) {GET_METHOD(type, onRedraw)(dm);}
+ bool onTouchStart(uint8_t tag) {return GET_METHOD(type, onTouchStart)(tag);}
+ bool onTouchHeld(uint8_t tag) {return GET_METHOD(type, onTouchHeld)(tag);}
+ bool onTouchEnd(uint8_t tag) {return GET_METHOD(type, onTouchEnd)(tag);}
+
+ void initializeAll();
+};
+
+/********************** SCREEN STACK ******************************/
+
+// To conserve dynamic memory, the screen stack is hard-coded to
+// have four values, allowing a menu of up to four levels.
+
+class ScreenStack : public ScreenRef {
+ private:
+ uint8_t stack[4];
+
+ public:
+ void start();
+ void push(onRedraw_func_t);
+ void push();
+ void pop();
+ void forget();
+ void goTo(onRedraw_func_t);
+ void goBack();
+
+ uint8_t peek() {return stack[0];}
+ uint8_t getScreen() {return getType();}
+};
+
+extern ScreenStack current_screen;
+
+/********************** BASE SCREEN CLASS ******************************/
+
+/* UIScreen is the base class for all user interface screens.
+ */
+class UIScreen {
+ public:
+ static void onStartup() {}
+ static void onEntry() {current_screen.onRefresh();}
+ static void onExit() {}
+ static void onIdle() {}
+ static bool onTouchStart(uint8_t) {return true;}
+ static bool onTouchHeld(uint8_t) {return false;}
+ static bool onTouchEnd(uint8_t) {return true;}
+};
+
+#define PUSH_SCREEN(screen) current_screen.push(screen::onRedraw);
+#define GOTO_SCREEN(screen) current_screen.goTo(screen::onRedraw);
+#define GOTO_PREVIOUS() current_screen.goBack();
+#define AT_SCREEN(screen) (current_screen.getType() == current_screen.lookupScreen(screen::onRedraw))
+#define IS_PARENT_SCREEN(screen) (current_screen.peek() == current_screen.lookupScreen(screen::onRedraw))
+
+/************************** CACHED VS UNCHACHED SCREENS ***************************/
+
+class UncachedScreen {
+ public:
+ static void onRefresh() {
+ using namespace FTDI;
+ CLCD::CommandFifo cmd;
+ cmd.cmd(CMD_DLSTART);
+
+ current_screen.onRedraw(BOTH);
+
+ cmd.cmd(DL::DL_DISPLAY);
+ cmd.cmd(CMD_SWAP);
+ cmd.execute();
+ }
+};
+
+template
+class CachedScreen {
+ protected:
+ static bool storeBackground(){
+ DLCache dlcache(DL_SLOT);
+ if (!dlcache.store(DL_SIZE)) {
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("CachedScreen::storeBackground() failed: not enough DL cache space");
+ return false;
+ }
+ return true;
+ }
+
+ static void repaintBackground(){
+ using namespace FTDI;
+ DLCache dlcache(DL_SLOT);
+ CLCD::CommandFifo cmd;
+
+ cmd.cmd(CMD_DLSTART);
+ current_screen.onRedraw(BACKGROUND);
+
+ dlcache.store(DL_SIZE);
+ }
+
+ public:
+ static void onRefresh(){
+ using namespace FTDI;
+ DLCache dlcache(DL_SLOT);
+ CLCD::CommandFifo cmd;
+
+ cmd.cmd(CMD_DLSTART);
+
+ if (dlcache.has_data()) {
+ dlcache.append();
+ } else {
+ current_screen.onRedraw(BACKGROUND);
+ dlcache.store(DL_SIZE);
+ }
+
+ current_screen.onRedraw(FOREGROUND);
+
+ cmd.cmd(DL::DL_DISPLAY);
+ cmd.cmd(CMD_SWAP);
+ cmd.execute();
+ }
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_list.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_list.h
new file mode 100644
index 0000000000..a53ed95159
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_list.h
@@ -0,0 +1,38 @@
+/****************
+ * sound_list.h *
+ ****************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+class SoundList {
+ private:
+ static PROGMEM const struct list_t {
+ const char *const PROGMEM name;
+ const FTDI::SoundPlayer::sound_t* data;
+ } list[];
+ public:
+ static const uint8_t n;
+ static inline const char* name(uint8_t val) {
+ return (const char* ) pgm_read_ptr_near(&list[val].name);
+ }
+ static inline FTDI::SoundPlayer::sound_t* data(uint8_t val) {
+ return (FTDI::SoundPlayer::sound_t*) pgm_read_ptr_near(&list[val].data);
+ }
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.cpp
new file mode 100644
index 0000000000..e8c5e881c5
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.cpp
@@ -0,0 +1,111 @@
+/********************
+ * sound_player.cpp *
+ ********************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+
+namespace FTDI {
+ SoundPlayer sound; // Global sound player object
+
+ void SoundPlayer::set_volume(uint8_t vol) {
+ CLCD::mem_write_8(REG::VOL_SOUND, vol);
+ }
+
+ uint8_t SoundPlayer::get_volume() {
+ return CLCD::mem_read_8(REG::VOL_SOUND);
+ }
+
+ void SoundPlayer::play(effect_t effect, note_t note) {
+
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOPAIR("Playing note ", note);
+ SERIAL_ECHOLNPAIR(", instrument ", effect);
+ #endif
+
+ // Play the note
+ CLCD::mem_write_16(REG::SOUND, (note == REST) ? 0 : (((note ? note : NOTE_C4) << 8) | effect));
+ CLCD::mem_write_8(REG::PLAY, 1);
+ }
+
+ note_t SoundPlayer::frequency_to_midi_note(const uint16_t frequency_hz) {
+ const float f0 = 440;
+ return note_t(NOTE_A4 + (log(frequency_hz)-log(f0))*12/log(2) + 0.5);
+ }
+
+ // Plays a tone of a given frequency and duration. Since the FTDI FT810 only
+ // supports MIDI notes, we round down to the nearest note.
+
+ void SoundPlayer::play_tone(const uint16_t frequency_hz, const uint16_t duration_ms) {
+ play(ORGAN, frequency_to_midi_note(frequency_hz));
+
+ // Schedule silence to squelch the note after the duration expires.
+ sequence = silence;
+ wait = duration_ms;
+ timer.start();
+ }
+
+ void SoundPlayer::play(const sound_t* seq, play_mode_t mode) {
+ sequence = seq;
+ wait = 250; // Adding this delay causes the note to not be clipped, not sure why.
+ timer.start();
+
+ if (mode == PLAY_ASYNCHRONOUS) return;
+
+ // If playing synchronously, then play all the notes here
+
+ while (has_more_notes()) {
+ onIdle();
+ #ifdef EXTENSIBLE_UI
+ ExtUI::yield();
+ #endif
+ }
+ }
+
+ bool SoundPlayer::is_sound_playing() {
+ return CLCD::mem_read_8( REG::PLAY ) & 0x1;
+ }
+
+ void SoundPlayer::onIdle() {
+ if (!sequence) return;
+
+ const bool ready_for_next_note = (wait == 0) ? !is_sound_playing() : timer.elapsed(wait);
+
+ if (ready_for_next_note) {
+ const effect_t fx = effect_t(pgm_read_byte(&sequence->effect));
+ const note_t nt = note_t(pgm_read_byte(&sequence->note));
+ const uint32_t ms = uint32_t(pgm_read_byte(&sequence->sixteenths)) * 1000 / 16;
+
+ if (ms == 0 && fx == SILENCE && nt == END_SONG) {
+ sequence = 0;
+ play(SILENCE, REST);
+ } else {
+ wait = ms;
+ timer.start();
+ play(fx, nt);
+ sequence++;
+ }
+ }
+ }
+} // namespace FTDI
+
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.h
new file mode 100644
index 0000000000..e177ec57df
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/sound_player.h
@@ -0,0 +1,70 @@
+/******************
+ * sound_player.h *
+ ******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+namespace FTDI {
+ typedef enum {
+ PLAY_ASYNCHRONOUS,
+ PLAY_SYNCHRONOUS
+ } play_mode_t;
+
+ class SoundPlayer {
+ typedef FTDI::ftdi_registers REG;
+ typedef FTDI::ftdi_memory_map MAP;
+
+ public:
+ struct sound_t {
+ effect_t effect; // The sound effect number
+ note_t note; // The MIDI note value
+ uint16_t sixteenths; // Duration of note, in sixteeths of a second, or zero to play to completion
+ };
+
+ const uint8_t WAIT = 0;
+
+ private:
+ const sound_t *sequence;
+ tiny_timer_t timer;
+ tiny_time_t wait;
+
+ note_t frequency_to_midi_note(const uint16_t frequency);
+
+ public:
+ static void set_volume(uint8_t volume);
+ static uint8_t get_volume();
+
+ static void play(effect_t effect, note_t note = NOTE_C4);
+ static bool is_sound_playing();
+
+ void play(const sound_t* seq, play_mode_t mode = PLAY_SYNCHRONOUS);
+ void play_tone(const uint16_t frequency_hz, const uint16_t duration_ms);
+ bool has_more_notes() {return sequence != 0;};
+
+ void onIdle();
+ };
+
+ extern SoundPlayer sound;
+
+ const PROGMEM SoundPlayer::sound_t silence[] = {
+ {SILENCE, END_SONG, 0}
+ };
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.cpp
new file mode 100644
index 0000000000..69b3b7d7a6
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.cpp
@@ -0,0 +1,129 @@
+/****************
+ * text_box.cpp *
+ ****************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+
+namespace FTDI {
+ /**
+ * Given a str, end will be set to the position at which a line needs to
+ * be broken so that the display width is less than w. The line will also
+ * be broken after a '\n'. Returns the display width of the line.
+ */
+ static uint16_t find_line_break(const CLCD::FontMetrics &fm, uint16_t w, const char *str, const char *&end) {
+ const char *p = str;
+ end = str + strlen(str);
+ uint16_t width = fm.get_text_width(str);
+ for(;;) {
+ // Find next tentative line break.
+ char delim = *(p);
+ while (delim && delim != ' ' && delim != '\n') {
+ delim = *(++p);
+ }
+ // Check to see whether to break the line.
+ const uint16_t margin = fm.get_text_width(" ");
+ const uint16_t lw = p > str ? fm.get_text_width(str, p - str) + margin : 0;
+ if (lw < w) {
+ width = lw;
+ switch (delim) {
+ case '\0':
+ end = p;
+ break;
+ case '\n':
+ end = ++p;
+ break;
+ case ' ':
+ end = ++p;
+ continue;
+ }
+ }
+ return width;
+ }
+ }
+
+ /**
+ * This function returns a measurements of the word-wrapped text box.
+ */
+ static void measure_text_box(const CLCD::FontMetrics &fm, const char *str, uint16_t &width, uint16_t &height) {
+ const char *line_start = (const char*)str;
+ const char *line_end;
+ const uint16_t wrap_width = width;
+ width = height = 0;
+ for(;;) {
+ uint16_t line_width = find_line_break(fm, wrap_width, line_start, line_end);
+ if (line_end == line_start) break;
+ width = max(width, line_width);
+ height += fm.height;
+ line_start = line_end;
+ }
+ }
+
+ /**
+ * This function draws text inside a bounding box, doing word wrapping and using the largest font that will fit.
+ */
+ void draw_text_box(CommandProcessor& cmd, int x, int y, int w, int h, const char *str, uint16_t options, uint8_t font) {
+ CLCD::FontMetrics fm(font);
+
+ uint16_t box_width, box_height;
+
+ for(;;) {
+ box_width = w;
+ measure_text_box(fm, str, box_width, box_height);
+ if (box_width <= (uint16_t)w && box_height <= (uint16_t)h) break;
+ fm.load(--font);
+ if (font == 26) break;
+ }
+
+ const uint16_t dx = (options & OPT_RIGHTX) ? w : (options & OPT_CENTERX) ? w/2 : 0;
+ const uint16_t dy = (options & OPT_CENTERY) ? (h - box_height)/2 : 0;
+
+ const char *line_start = str;
+ const char *line_end;
+ for(;;) {
+ find_line_break(fm, w, line_start, line_end);
+ if (line_end == line_start) break;
+
+ const size_t line_len = line_end - line_start;
+ if (line_len) {
+ char line[line_len + 1];
+ strncpy(line, line_start, line_len);
+ line[line_len] = 0;
+ if (line[line_len - 1] == '\n' || line[line_len - 1] == ' ')
+ line[line_len - 1] = 0;
+
+ cmd.CLCD::CommandFifo::text(x + dx, y + dy, font, options & ~OPT_CENTERY);
+ cmd.CLCD::CommandFifo::str(line);
+ }
+ y += fm.height;
+
+ line_start = line_end;
+ }
+ }
+
+ void draw_text_box(CommandProcessor& cmd, int x, int y, int w, int h, progmem_str pstr, uint16_t options, uint8_t font) {
+ char str[strlen_P((const char*)pstr) + 1];
+ strcpy_P(str, (const char*)pstr);
+ draw_text_box(cmd, x, y, w, h, (const char*) str, options, font);
+ }
+} // namespace FTDI
+
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.h
new file mode 100644
index 0000000000..a0f99c6b08
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/text_box.h
@@ -0,0 +1,30 @@
+/**************
+ * text_box.h *
+ **************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/**
+ * This function draws text inside a bounding box, doing word wrapping and using the largest font that will fit.
+ */
+namespace FTDI {
+ void draw_text_box(class CommandProcessor& cmd, int x, int y, int w, int h, progmem_str str, uint16_t options = 0, uint8_t font = 31);
+ void draw_text_box(class CommandProcessor& cmd, int x, int y, int w, int h, const char *str, uint16_t options = 0, uint8_t font = 31);
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.cpp
new file mode 100644
index 0000000000..c7b35e92df
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.cpp
@@ -0,0 +1,51 @@
+/******************
+ * tiny_timer.cpp *
+ ******************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "ftdi_extended.h"
+
+#ifdef FTDI_EXTENDED
+
+bool tiny_timer_t::elapsed(tiny_time_t duration) {
+ uint8_t now = tiny_time_t::tiny_time(
+ #ifdef __MARLIN_FIRMWARE__
+ ExtUI::safe_millis()
+ #else
+ millis()
+ #endif
+ );
+ uint8_t elapsed = now - _start;
+ if (elapsed >= duration._duration) {
+ return true;
+ } else {
+ return false;
+ }
+}
+
+void tiny_timer_t::start() {
+ _start = tiny_time_t::tiny_time(
+ #ifdef __MARLIN_FIRMWARE__
+ ExtUI::safe_millis()
+ #else
+ millis()
+ #endif
+ );
+}
+#endif // FTDI_EXTENDED
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.h
new file mode 100644
index 0000000000..9db9127529
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extended/tiny_timer.h
@@ -0,0 +1,56 @@
+/****************
+ * tiny_timer.h *
+ ****************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/* Helpful Reference:
+ *
+ * https://arduino.stackexchange.com/questions/12587/how-can-i-handle-the-millis-rollover
+ */
+
+/* tiny_interval_t downsamples a 32-bit millis() value
+ into a 8-bit value which can record periods of
+ a few seconds with a rougly 1/16th of second
+ resolution. This allows us to measure small
+ intervals without needing to use four-byte counters.
+ */
+class tiny_time_t {
+ private:
+ friend class tiny_timer_t;
+ uint8_t _duration;
+
+ static uint8_t tiny_time(uint32_t ms) {return ceil(float(ms) / 64);};
+
+ public:
+ tiny_time_t() : _duration(0) {}
+ tiny_time_t(uint32_t ms) : _duration(tiny_time(ms)) {}
+ tiny_time_t & operator= (uint32_t ms) {_duration = tiny_time(ms); return *this;}
+ bool operator == (uint32_t ms) {return _duration == tiny_time(ms);}
+};
+
+class tiny_timer_t {
+ private:
+ uint8_t _start;
+
+ public:
+ void start();
+ bool elapsed(tiny_time_t interval);
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/circular_progress.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/circular_progress.h
new file mode 100644
index 0000000000..412da5b361
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/circular_progress.h
@@ -0,0 +1,100 @@
+/***********************
+ * circular_progress.h *
+ ***********************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/* This function draws a circular progress "ring" */
+
+void draw_circular_progress(CommandProcessor& cmd, int x, int y, int w, int h, uint8_t percent, uint32_t bgcolor, uint32_t fgcolor, float rim = 0.3) {
+ using namespace FTDI;
+
+ const float a = float(percent)/100.0*2.0*PI;
+ const float a1 = min(PI/2, a);
+ const float a2 = min(PI/2, a-a1);
+ const float a3 = min(PI/2, a-a1-a2);
+ const float a4 = min(PI/2, a-a1-a2-a3);
+
+ const int ro = min(w,h) * 8;
+ const int rr = ro * rim;
+ const int cx = x * 16 + w * 8;
+ const int cy = y * 16 + h * 8;
+
+ // Load a rim shape into stencil buffer
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(TAG_MASK(0));
+ cmd.cmd(CLEAR(0,1,0));
+ cmd.cmd(COLOR_MASK(0,0,0,0));
+ cmd.cmd(STENCIL_OP(STENCIL_OP_KEEP, STENCIL_OP_INVERT));
+ cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_ALWAYS, 255, 255));
+ cmd.cmd(BEGIN(POINTS));
+ cmd.cmd(POINT_SIZE(ro));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(POINT_SIZE(ro - rr));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(RESTORE_CONTEXT());
+
+ // Mask further drawing by stencil buffer
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(STENCIL_FUNC(STENCIL_FUNC_NOTEQUAL, 0, 255));
+
+ // Fill the background
+ cmd.cmd(COLOR_RGB(bgcolor));
+ cmd.cmd(BEGIN(POINTS));
+ cmd.cmd(POINT_SIZE(ro));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(COLOR_RGB(fgcolor));
+
+ // Paint upper-right quadrant
+ cmd.cmd(BEGIN(EDGE_STRIP_A));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(VERTEX2F(cx + ro*sin(a1) + 16,cy - ro*cos(a1) + 8));
+
+ // Paint lower-right quadrant
+ if (a > PI/2) {
+ cmd.cmd(BEGIN(EDGE_STRIP_R));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(VERTEX2F(cx + ro*cos(a2),cy + ro*sin(a2) + 16));
+ }
+
+ // Paint lower-left quadrant
+ if (a > PI) {
+ cmd.cmd(BEGIN(EDGE_STRIP_B));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(VERTEX2F(cx - ro*sin(a3) - 8,cy + ro*cos(a3)));
+ }
+
+ // Paint upper-left quadrant
+ if (a > 1.5*PI) {
+ cmd.cmd(BEGIN(EDGE_STRIP_L));
+ cmd.cmd(VERTEX2F(cx, cy));
+ cmd.cmd(VERTEX2F(cx - ro*cos(a4),cy - ro*sin(a4)));
+ }
+ cmd.cmd(RESTORE_CONTEXT());
+
+ // Draw the text
+ char str[5];
+ sprintf(str,"%d\%%",percent);
+
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(COLOR_RGB(fgcolor));
+ cmd.text(x,y,w,h,str, OPT_CENTERX | OPT_CENTERY);
+ cmd.cmd(RESTORE_CONTEXT());
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/poly_ui.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/poly_ui.h
new file mode 100644
index 0000000000..52146510c5
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/poly_ui.h
@@ -0,0 +1,395 @@
+/*************
+ * poly_ui.h *
+ *************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/**
+ * The PolyReader class iterates over an array of (x,y) pairs.
+ * For supporting polygons with holes an end-of-loop marker may
+ * be embedded into the data stream:
+ *
+ * const PROGMEM uint16_t data[] = {
+ * x, y, x, y, ..., eol,
+ * ...
+ * x, y, x, y, ..., eol
+ * }
+ *
+ * The PolyReader object can be used to iterate over the points.
+ *
+ * PolyReader r(data, N_ELEMENTS(data));
+ *
+ * for(r.start();r.has_more(); r.next()) {
+ * uint16_t x = r.x;
+ * uint16_t y = r.y;
+ *
+ * // Do something with the point
+ * ...
+ *
+ * // Do something else if this point
+ * // closes a loop.
+ * if (r.end_of_loop()) {
+ * ...
+ * }
+ * }
+ *
+ */
+
+class PolyReader {
+ private:
+ typedef uint16_t type_t;
+
+ static constexpr type_t eol = 0xFFFF;
+
+ const type_t *p, *top, *end;
+ type_t start_x, start_y;
+
+ void close_loop() {
+ x = start_x;
+ y = start_y;
+ start_x = eol;
+ start_y = eol;
+ }
+
+ public:
+ type_t x, y;
+
+ // Begin reading a polygon data structure
+ PolyReader(const uint16_t data[], const size_t n_elements) : top(data), end(data + n_elements) {
+ start();
+ }
+
+ void start() {
+ p = top;
+ start_x = eol;
+ next();
+ }
+
+ // Reads the next point in the polygon data structure
+ void next() {
+ if (!p) return;
+
+ if (p == end) {
+ if (start_x != eol)
+ close_loop();
+ else
+ p = NULL;
+ } else {
+ x = pgm_read_word_far(p++);
+ if (x == eol)
+ close_loop();
+ else {
+ y = pgm_read_word_far(p++);
+ if (start_x == eol) {
+ start_x = x;
+ start_y = y;
+ }
+ }
+ }
+ }
+
+ bool has_more() {return p != NULL;}
+ bool end_of_loop() {return start_x == eol;}
+};
+
+/**
+ * The TransformedPolyReader class works like the PolyReader,
+ * but the (x,y) input is assumed to be normalized onto a
+ * unit square and then mapped to the full 16-bits, i.e.
+ * (0.0,1.0) => (0x0000,0xFFFE). This class will scale the
+ * data to fit the entire display, a bounding box, or apply
+ * some arbitrary affine transform.
+ *
+ * This class is suitable for reading data from "svg2cpp.py"
+ */
+class TransformedPolyReader : public PolyReader {
+ private:
+ /**
+ * Fixed point type for fast transformations, supports
+ * values from 0 to 1024, with 1/32 precision.
+ */
+ static constexpr uint8_t fract_bits = 5;
+ typedef int16_t fix_t;
+ fix_t makefix(float f) {return f * (1 << fract_bits);}
+
+ // First two rows of 3x3 transformation matrix
+ fix_t a, b, c;
+ fix_t d, e, f;
+
+ void transform() {
+ /**
+ * Values from PolyReader vary from 0 to FFFE.
+ * As an approximation to dividing by FFFE,
+ * we perform a bit shift right by 16.
+ */
+ const int32_t px = PolyReader::x;
+ const int32_t py = PolyReader::y;
+ const int32_t round = 1 << (fract_bits-1);
+ x = (((((a * px) + (b * py)) >> 16) + c) + round) >> fract_bits;
+ y = (((((d * px) + (e * py)) >> 16) + f) + round) >> fract_bits;
+ }
+
+ void set_transform(
+ fix_t A, fix_t B, fix_t C,
+ fix_t D, fix_t E, fix_t F
+ ) {
+ a = A; b = B; c = C;
+ d = D; e = E; f = F;
+ }
+
+ public:
+ typedef int16_t type_t;
+
+ type_t x, y;
+
+ TransformedPolyReader(const uint16_t data[], const size_t n) : PolyReader(data, n) {
+ scale_to_fit();
+ transform();
+ }
+
+ // Set an arbitrary affine transform
+ void set_transform(
+ float A, float B, float C,
+ float D, float E, float F
+ ) {
+ set_transform(
+ makefix(A), makefix(B), makefix(C),
+ makefix(D), makefix(E), makefix(F)
+ );
+ }
+
+ // Scale the data to fit a specified bounding box
+ void scale_to_fit(type_t x_min, type_t y_min, type_t x_max, type_t y_max) {
+ fix_t sx = makefix(x_max - x_min);
+ fix_t sy = makefix(y_max - y_min);
+ fix_t tx = makefix(x_min);
+ fix_t ty = makefix(y_min);
+ set_transform(
+ sx, 0, tx,
+ 0, sy, ty
+ );
+ }
+
+ // Scale to fit the entire display (default)
+ void scale_to_fit() {
+ scale_to_fit(0, 0, FTDI::display_width, FTDI::display_height);
+ }
+
+ void next() {
+ PolyReader::next();
+ transform();
+ }
+};
+
+/**
+ * The DeduplicatedPolyReader wraps around another PolyReader
+ * class to remove repeated points from the data. This could
+ * happen when scaling down using TransformedPolyReader, for
+ * example.
+ */
+template
+class DeduplicatedPolyReader : public POLY_READER {
+ private:
+ typename POLY_READER::type_t last_x, last_y;
+
+ static constexpr typename POLY_READER::type_t eol = 0xFFFF;
+
+ public:
+ DeduplicatedPolyReader(const uint16_t data[], const size_t n) : POLY_READER(data, n) {
+ last_x = POLY_READER::x;
+ last_y = POLY_READER::y;
+ }
+
+ void next() {
+ do {
+ if (!POLY_READER::has_more()) return;
+ POLY_READER::next();
+ } while (POLY_READER::x == last_x && POLY_READER::y == last_y && !POLY_READER::end_of_loop());
+ if (POLY_READER::end_of_loop()) {
+ last_x = last_y = eol;
+ } else {
+ last_x = POLY_READER::x;
+ last_y = POLY_READER::y;
+ }
+ }
+};
+
+/**
+ * The helper class allows you to build an interface based on arbitrary
+ * shapes.
+ */
+template>
+class GenericPolyUI {
+ private:
+ CommandProcessor &cmd;
+
+ // Attributes used to paint buttons
+
+ uint32_t btn_fill_color = 0x000000;
+ uint32_t btn_shadow_color = 0xF3E0E0;
+ uint8_t btn_shadow_depth = 5;
+ uint32_t btn_stroke_color = 0x000000;
+ uint8_t btn_stroke_width = 28;
+
+ draw_mode_t mode;
+
+ public:
+ typedef POLY_READER poly_reader_t;
+
+ GenericPolyUI(CommandProcessor &c, draw_mode_t what = BOTH) : cmd(c), mode(what) {}
+
+ // Fills a polygon with the current COLOR_RGB
+ void fill(poly_reader_t r, bool clip = true) {
+ using namespace FTDI;
+ int16_t x, y, w, h;
+
+ if (clip) {
+ // Clipping reduces the number of pixels that are
+ // filled, allowing more complex shapes to be drawn
+ // in the alloted time.
+ bounds(r, x, y, w, h);
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(SCISSOR_XY(x, y));
+ cmd.cmd(SCISSOR_SIZE(w, h));
+ }
+
+ Polygon p(cmd);
+ p.begin_fill();
+ p.begin_loop();
+ for(r.start();r.has_more();r.next()) {
+ p(r.x * 16, r.y * 16);
+ if (r.end_of_loop()) {
+ p.end_loop();
+ p.begin_loop();
+ }
+ }
+ p.end_loop();
+ p.end_fill();
+ if (clip)
+ cmd.cmd(RESTORE_CONTEXT());
+ }
+
+ void shadow(poly_reader_t r, uint8_t offset) {
+ #if FTDI_API_LEVEL >= 810
+ using namespace FTDI;
+ cmd.cmd(VERTEX_TRANSLATE_X(offset * 16));
+ cmd.cmd(VERTEX_TRANSLATE_Y(offset * 16));
+ fill(r, false);
+ cmd.cmd(VERTEX_TRANSLATE_X(0));
+ cmd.cmd(VERTEX_TRANSLATE_Y(0));
+ #endif
+ }
+
+ // Strokes a polygon with the current COLOR_RGB
+ void stroke(poly_reader_t r) {
+ using namespace FTDI;
+ Polygon p(cmd);
+ p.begin_stroke();
+ p.begin_loop();
+ for(r.start();r.has_more(); r.next()) {
+ p(r.x * 16, r.y * 16);
+ if (r.end_of_loop()) {
+ p.end_loop();
+ p.begin_loop();
+ }
+ }
+ p.end_loop();
+ p.end_stroke();
+ }
+
+ // Compute the bounds of a polygon
+ void bounds(poly_reader_t r, int16_t &x, int16_t &y, int16_t &w, int16_t &h) {
+ int16_t x_min = INT16_MAX;
+ int16_t y_min = INT16_MAX;
+ int16_t x_max = INT16_MIN;
+ int16_t y_max = INT16_MIN;
+ for(r.start(); r.has_more(); r.next()) {
+ x_min = min(x_min, r.x);
+ x_max = max(x_max, r.x);
+ y_min = min(y_min, r.y);
+ y_max = max(y_max, r.y);
+ }
+ x = x_min;
+ y = y_min;
+ w = x_max - x_min;
+ h = y_max - y_min;
+ }
+
+ /**
+ * Draw shaped buttons. Buttons are drawn out of a polygon which is
+ * filled and stroked on top of a drop shadow. The button will
+ * become "pushed" when touched.
+ */
+
+ void button_fill(const uint32_t color) {
+ btn_fill_color = color;
+ }
+
+ void button_stroke(const uint32_t color, const uint8_t width) {
+ btn_stroke_color = color;
+ btn_stroke_width = width;
+ }
+
+ void button_shadow(const uint32_t color, const uint8_t depth) {
+ btn_shadow_color = color;
+ btn_shadow_depth = depth;
+ }
+
+ void button(const uint8_t tag, poly_reader_t r) {
+ using namespace FTDI;
+ // Draw the shadow
+ #if FTDI_API_LEVEL >= 810
+ if (mode & BACKGROUND) {
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(TAG(tag));
+ cmd.cmd(VERTEX_TRANSLATE_X(btn_shadow_depth * 16));
+ cmd.cmd(VERTEX_TRANSLATE_Y(btn_shadow_depth * 16));
+ cmd.cmd(COLOR_RGB(btn_shadow_color));
+ fill(r, false);
+ cmd.cmd(RESTORE_CONTEXT());
+ }
+ #endif
+
+ if (mode & FOREGROUND) {
+ cmd.cmd(SAVE_CONTEXT());
+ #if FTDI_API_LEVEL >= 810
+ if (EventLoop::get_pressed_tag() == tag) {
+ // "Push" the button
+ cmd.cmd(VERTEX_TRANSLATE_X(btn_shadow_depth * 16));
+ cmd.cmd(VERTEX_TRANSLATE_Y(btn_shadow_depth * 16));
+ }
+ #endif
+ // Draw the fill and stroke
+ cmd.cmd(TAG(tag));
+ cmd.cmd(COLOR_RGB(btn_fill_color));
+ fill(r, false);
+ cmd.cmd(COLOR_RGB(btn_stroke_color));
+ cmd.cmd(LINE_WIDTH(btn_stroke_width));
+ stroke(r);
+ cmd.cmd(RESTORE_CONTEXT());
+ }
+ }
+
+ void color(const uint32_t color) {
+ cmd.cmd(FTDI::COLOR_RGB(color));
+ }
+};
+
+typedef GenericPolyUI<> PolyUI;
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/svg2cpp.py b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/svg2cpp.py
new file mode 100755
index 0000000000..6a8d074916
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/extras/svg2cpp.py
@@ -0,0 +1,278 @@
+#!/usr/bin/python
+
+# Written By Marcio Teixeira 2018 - Aleph Objects, Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# To view a copy of the GNU General Public License, go to the following
+# location: .
+
+from __future__ import print_function
+import argparse, re, sys
+
+usage = '''
+This program extracts line segments from a SVG file and writes
+them as coordinates in a C array. The x and y values will be
+scaled from 0x0000 to 0xFFFE. 0xFFFF is used as path separator.
+
+This program can only interpret straight segments, not curves.
+It also cannot handle SVG transform attributes. To convert an
+SVG file into the proper format, use the following procedure:
+
+ - Load SVG file into Inkscape
+ - Convert all Objects to Paths (Path -> Object to Path)
+ - Convert all Strokes to Paths (Path -> Stroke to Path)
+ - Combine all paths into one (Path -> Combine) [1]
+ - Convert all curves into short line segments
+ (Extensions -> Modify Paths -> Flatten Beziers...)
+ - Save as new SVG
+ - Convert into a header file using this utility
+ - To give paths individual names, break apart paths and
+ use the XML Editor to set the "id" attributes.
+
+[1] Combining paths is necessary to remove transforms. You
+could also use inkscape-applytransforms Inkscape extension.
+
+'''
+
+header = '''
+/****************************************************************************
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/**
+ * This file was auto-generated using "svg2cpp.pl"
+ *
+ * The encoding consists of x,y pairs with the min and max scaled to
+ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
+ * start of a new closed path.
+ */
+
+#pragma once
+'''
+
+class ComputeBoundingBox:
+ def reset(self):
+ self.x_min = float(" inf")
+ self.y_min = float(" inf")
+ self.x_max = float("-inf")
+ self.y_max = float("-inf")
+ self.n_points = 0
+ self.n_paths = 0
+
+ def command(self, type, x, y):
+ self.x_min = min(self.x_min, x)
+ self.x_max = max(self.x_max, x)
+ self.y_min = min(self.y_min, y)
+ self.y_max = max(self.y_max, y)
+
+ if type == "M":
+ self.n_paths += 1
+ self.n_points += 1
+
+ def scale(self, x, y):
+ x -= self.x_min
+ y -= self.y_min
+ x /= self.x_max - self.x_min
+ y /= self.y_max - self.y_min
+ #y = 1 - y # Flip upside down
+ return (x, y)
+
+ def path_finished(self, id):
+ pass
+
+ def write(self):
+ print("constexpr float x_min = %f;\n" % self.x_min)
+ print("constexpr float x_max = %f;\n" % self.x_max)
+ print("constexpr float y_min = %f;\n" % self.y_min)
+ print("constexpr float y_max = %f;\n" % self.y_max)
+
+ def from_svg_view_box(self, svg):
+ s = re.search(']+>', svg);
+ if s:
+ m = re.search('viewBox="([0-9-.]+) ([0-9-.]+) ([0-9-.]+) ([0-9-.]+)"', svg)
+ if m:
+ self.x_min = float(m.group(1))
+ self.y_min = float(m.group(2))
+ self.x_max = float(m.group(3))
+ self.y_max = float(m.group(4))
+ return True
+ return False
+
+class WriteDataStructure:
+ def __init__(self, bounding_box):
+ self.bounds = bounding_box
+
+ def reset(self, ):
+ self.hex_words = []
+
+ def push(self, value):
+ self.hex_words.append("0x%04X" % value)
+
+ def command(self, type, x, y):
+ if type == "M":
+ self.push(0xFFFF)
+ x, y = self.bounds.scale(x,y)
+ self.push(x * 0xFFFE)
+ self.push(y * 0xFFFE)
+
+ def path_finished(self, id):
+ if self.hex_words and self.hex_words[0] == "0xFFFF":
+ self.hex_words.pop(0)
+ print("const PROGMEM uint16_t", id + "[] = {" + ", ".join (self.hex_words) + "};\n")
+ self.hex_words = []
+
+class Parser:
+ def __init__(self, op):
+ self.op = op
+ self.reset()
+
+ def reset(self):
+ self.last_x = 0
+ self.last_y = 0
+ self.initial_x = 0
+ self.initial_y = 0
+
+ def process_svg_path_L_or_M(self, cmd, x, y):
+ self.op.command(cmd, x, y)
+ self.last_x = x
+ self.last_y = y
+ if cmd == "M":
+ self.initial_x = x
+ self.initial_y = y
+
+ def process_svg_path_data_cmd(self, id, cmd, a, b):
+ """Converts the various types of moves into L or M commands
+ and dispatches to process_svg_path_L_or_M for futher processing."""
+ if cmd == "Z" or cmd == "z":
+ self.process_svg_path_L_or_M("L", self.initial_x, self.initial_y)
+ elif cmd == "H":
+ self.process_svg_path_L_or_M("L", a, self.last_y)
+ elif cmd == "V":
+ self.process_svg_path_L_or_M("L", self.last_x, a)
+ elif cmd == "h":
+ self.process_svg_path_L_or_M("L", self.last_x + a, self.last_y)
+ elif cmd == "v":
+ self.process_svg_path_L_or_M("L", self.last_x, self.last_y + a)
+ elif cmd == "L":
+ self.process_svg_path_L_or_M("L", a, b)
+ elif cmd == "l":
+ self.process_svg_path_L_or_M("L", self.last_x + a, self.last_y + b)
+ elif cmd == "M":
+ self.process_svg_path_L_or_M("M", a, b)
+ elif cmd == "m":
+ self.process_svg_path_L_or_M("M", self.last_x + a, self.last_y + b)
+ else:
+ print("Unsupported path data command:", cmd, "in path", id, "\n", file=sys.stderr)
+ quit()
+
+ def eat_token(self, regex):
+ """Looks for a token at the start of self.d.
+ If found, the token is removed."""
+ self.m = re.match(regex,self.d)
+ if self.m:
+ self.d = self.d[self.m.end():]
+ return self.m
+
+ def process_svg_path_data(self, id, d):
+ """Breaks up the "d" attribute into individual commands
+ and calls "process_svg_path_data_cmd" for each"""
+
+ self.d = d
+ while (self.d):
+ if self.eat_token('\s+'):
+ pass # Just eat the spaces
+
+ elif self.eat_token('([LMHVZlmhvz])'):
+ cmd = self.m.group(1)
+ # The following commands take no arguments
+ if cmd == "Z" or cmd == "z":
+ self.process_svg_path_data_cmd(id, cmd, 0, 0)
+
+ elif self.eat_token('([CScsQqTtAa])'):
+ print("Unsupported path data command:", self.m.group(1), "in path", id, "\n", file=sys.stderr)
+ quit()
+
+ elif self.eat_token('([ ,]*[-0-9e.]+)+'):
+ # Process list of coordinates following command
+ coords = re.split('[ ,]+', self.m.group(0))
+ # The following commands take two arguments
+ if cmd == "L" or cmd == "l":
+ while coords:
+ self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), float(coords.pop(0)))
+ elif cmd == "M":
+ while coords:
+ self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), float(coords.pop(0)))
+ # If a MOVETO has multiple points, the subsequent ones are assumed to be LINETO
+ cmd = "L"
+ elif cmd == "m":
+ while coords:
+ self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), float(coords.pop(0)))
+ # If a MOVETO has multiple points, the subsequent ones are assumed to be LINETO
+ cmd = "l"
+ # Assume all other commands are single argument
+ else:
+ while coords:
+ self.process_svg_path_data_cmd(id, cmd, float(coords.pop(0)), 0)
+ else:
+ print("Syntax error:", d, "in path", id, "\n", file=sys.stderr)
+ quit()
+
+ def process_svg_paths(self, svg):
+ self.op.reset()
+ for path in re.findall(']+>', svg):
+ id = ""
+ m = re.search(' id="(.*)"', path)
+ if m:
+ id = m.group(1)
+
+ m = re.search(' transform="(.*)"', path)
+ if m:
+ print("Found transform in path", id, "! Cannot process file!", file=sys.stderr)
+ quit()
+
+ m = re.search(' d="(.*)"', path)
+ if m:
+ self.process_svg_path_data(id, m.group(1))
+ self.op.path_finished(id)
+ self.reset()
+
+if __name__ == "__main__":
+ parser = argparse.ArgumentParser()
+ parser.add_argument("filename")
+ args = parser.parse_args()
+
+ f = open(args.filename, "r")
+ data = f.read()
+
+ print(header)
+
+ b = ComputeBoundingBox()
+ if not b.from_svg_view_box(data):
+ # Can't find the view box, so use the bounding box of the elements themselves.
+ p = Parser(b)
+ p.process_svg_paths(data)
+ b.write()
+
+ w = WriteDataStructure(b)
+ p = Parser(w)
+ p.process_svg_paths(data)
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/ftdi_eve_lib.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/ftdi_eve_lib.h
new file mode 100644
index 0000000000..5a7d3c960b
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/ftdi_eve_lib/ftdi_eve_lib.h
@@ -0,0 +1,27 @@
+/******************
+ * ftdi_eve_lib.h *
+ ******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2019 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2019 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "compat.h"
+#include "basic/ftdi_basic.h"
+#include "extended/ftdi_extended.h"
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/marlin_events.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/marlin_events.cpp
new file mode 100644
index 0000000000..4318ae0a04
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/marlin_events.cpp
@@ -0,0 +1,128 @@
+/*********************
+ * marlin_events.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "compat.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens/screens.h"
+
+namespace ExtUI {
+ using namespace Theme;
+ using namespace FTDI;
+
+ void onStartup() {
+ EventLoop::setup();
+ }
+
+ void onIdle() {
+ EventLoop::loop();
+ }
+
+ void onPrinterKilled(PGM_P lcd_msg) {
+ KillScreen::show(progmem_str(lcd_msg));
+ }
+
+ void onMediaInserted() {
+ if (AT_SCREEN(StatusScreen))
+ StatusScreen::setStatusMessage(F(MSG_MEDIA_INSERTED));
+ sound.play(media_inserted, PLAY_ASYNCHRONOUS);
+ }
+
+ void onMediaRemoved() {
+ if (AT_SCREEN(StatusScreen))
+ StatusScreen::setStatusMessage(F(MSG_MEDIA_REMOVED));
+ sound.play(media_removed, PLAY_ASYNCHRONOUS);
+ if (AT_SCREEN(FilesScreen)) {
+ GOTO_SCREEN(StatusScreen)
+ }
+ }
+
+ void onMediaError() {
+ sound.play(sad_trombone, PLAY_ASYNCHRONOUS);
+ AlertDialogBox::showError(F("Unable to read media."));
+ }
+
+ void onStatusChanged(const char* lcd_msg) {
+ StatusScreen::setStatusMessage(lcd_msg);
+ }
+
+ void onStatusChanged(progmem_str lcd_msg) {
+ StatusScreen::setStatusMessage(lcd_msg);
+ }
+
+ void onPrintTimerStarted() {
+ InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_STARTED);
+ }
+
+ void onPrintTimerStopped() {
+ InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FINISHED);
+ }
+
+ void onPrintTimerPaused() {
+ }
+
+ void onFilamentRunout(const extruder_t extruder) {
+ char lcd_msg[30];
+ sprintf_P(lcd_msg, PSTR("Extruder %d Filament Error"), extruder + 1);
+ StatusScreen::setStatusMessage(lcd_msg);
+ InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FAILED);
+ }
+
+ void onFactoryReset() {
+ InterfaceSettingsScreen::defaultSettings();
+ }
+
+ void onStoreSettings(char *buff) {
+ InterfaceSettingsScreen::saveSettings(buff);
+ }
+
+ void onLoadSettings(const char *buff) {
+ InterfaceSettingsScreen::loadSettings(buff);
+ }
+
+ void onConfigurationStoreWritten(bool success) {
+ #ifdef LULZBOT_EEPROM_BACKUP_SIZE
+ if (success && InterfaceSettingsScreen::backupEEPROM()) {
+ SERIAL_ECHOLNPGM("Made backup of EEPROM to SPI Flash");
+ }
+ #else
+ UNUSED(success);
+ #endif
+ }
+
+ void onConfigurationStoreRead(bool) {
+ }
+
+ void onPlayTone(const uint16_t frequency, const uint16_t duration) {
+ sound.play_tone(frequency, duration);
+ }
+
+ void onUserConfirmRequired(const char * const msg) {
+ if (msg)
+ ConfirmUserRequestAlertBox::show(msg);
+ else
+ ConfirmUserRequestAlertBox::hide();
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/pin_mappings.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/pin_mappings.h
new file mode 100644
index 0000000000..c2818570f1
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/pin_mappings.h
@@ -0,0 +1,142 @@
+/******************
+ * pin_mappings.h *
+ ******************/
+
+/****************************************************************************
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+/* This file defines mappings from the ULTRA_LCD pins functions to new
+ * functions for the FTDI display. These mappings allows any board that
+ * support ULTRA_LCD via EXP1 and EXP2 connectors to use FTDI modules
+ * without adding new pin definitions to the board.
+ */
+
+#ifdef CR10_TFT_PINMAP
+ #ifndef __MARLIN_FIRMWARE__
+ #error This pin mapping requires Marlin.
+ #endif
+
+ #define CLCD_USE_SOFT_SPI
+ #define CLCD_SOFT_SPI_SCLK LCD_PINS_D4 // PORTA1 Pin 6
+ #define CLCD_SOFT_SPI_MOSI LCD_PINS_ENABLE // PORTC1 Pin 8
+ #define CLCD_SPI_CS LCD_PINS_RS // PORTA3 Pin 7
+ #define CLCD_SOFT_SPI_MISO 16 // PORTC0 BTN_ENC Pin 2
+ #define CLCD_MOD_RESET 11 // PORTD3 BTN_EN1 Pin 3
+ #define CLCD_AUX_0 10 // PORTD2 BTN_EN2 Pin 5
+ #define CLCD_AUX_1 BEEPER_PIN // PORTA4 Pin 1
+#endif
+
+/**
+ * The AlephObjects pinout for re-purposing the UltraLCD
+ * connector EXP1 for software SPI (rev B, obsolete)
+ */
+
+#ifdef AO_EXP1_DEPRECATED_PINMAP
+ #ifndef __MARLIN_FIRMWARE__
+ #error This pin mapping requires Marlin.
+ #endif
+
+ #define CLCD_MOD_RESET LCD_PINS_D4
+ #define CLCD_SPI_CS LCD_PINS_D5
+
+ #define CLCD_AUX_0 LCD_PINS_ENABLE
+ #define CLCD_AUX_1 BTN_ENC
+ #define CLCD_AUX_2 BEEPER_PIN
+
+ #define CLCD_USE_SOFT_SPI
+ #define CLCD_SOFT_SPI_SCLK LCD_PINS_D7
+ #define CLCD_SOFT_SPI_MOSI LCD_PINS_D6
+ #define CLCD_SOFT_SPI_MISO LCD_PINS_RS
+#endif
+
+/**
+ * AO_EXP1_PINMAP
+ *
+ * The AlephObjects mapping for re-purposing the UltraLCD
+ * connector EXP1 for software SPI for display (rev C):
+ *
+ * EXP2: FTDI: SD -or- USB [1]: ULTRA_LCD:
+ * 1 MISO MISO MISO --> BEEPER
+ * 2 SCLK SCLK SCLK --> BTN_ENC
+ * 3 PD_N - - --> LCDE
+ * 4 - CS_N CS_N --> LCDRS
+ * 5 CS_N - - --> LCD4
+ * 6 MOSI MOSI MOSI --> LCD5
+ * 7 - SD_DET INT --> LCD6
+ * 8 RESET - RESET --> LCD4
+ * 9 GND GND GND --> GND
+ * 10 5V 5V 5V --> 5V
+ *
+ * [1] At the moment, Marlin does not support SD or USB
+ * functionality over software SPI.
+ */
+
+#ifdef AO_EXP1_PINMAP
+ #ifndef __MARLIN_FIRMWARE__
+ #error This pin mapping requires Marlin.
+ #endif
+
+ #define CLCD_MOD_RESET LCD_PINS_ENABLE
+ #define CLCD_SPI_CS LCD_PINS_D4
+
+ #define CLCD_USE_SOFT_SPI
+ #define CLCD_SOFT_SPI_SCLK BTN_ENC
+ #define CLCD_SOFT_SPI_MOSI LCD_PINS_D5
+ #define CLCD_SOFT_SPI_MISO BEEPER_PIN
+#endif
+
+/**
+ * AO_EXP2_PINMAP
+ *
+ * The AlephObjects mapping for re-purposing the UltraLCD
+ * connector EXP2 for hardware SPI for display and SD card
+ * or USB (rev C):
+ *
+ * EXP2: FTDI: SD -or- USB: ULTRA_LCD:
+ * 1 MISO MISO MISO --> MISO
+ * 2 SCLK SCLK SCLK --> SCLK
+ * 3 PD_N - - --> BTN_EN2
+ * 4 - CS_N CS_N --> SD_CSEL
+ * 5 CS_N - - --> BTN_EN1
+ * 6 MOSI MOSI MOSI --> MOSI
+ * 7 - SD_DET INT --> SD_DET
+ * 8 RESET - RESET --> RESET
+ * 9 GND GND GND --> GND
+ * 10 5V 5V 5V --> KILL [3]
+ *
+ * [1] This configuration is not compatible with the
+ * EinsyRetro 1.1a because there is a level shifter
+ * on MISO enabled by SD/USB chip select.
+ *
+ * [2] This configuration allows daisy-chaining of the
+ * display and SD/USB on EXP2.
+ *
+ * [3] Archim Rambo provides 5V on this pin. On any other
+ * board, divert this wire from the ribbon cable and
+ * connect it to 5V at an endstop.
+ */
+
+#ifdef AO_EXP2_PINMAP
+ #ifndef __MARLIN_FIRMWARE__
+ #error This pin mapping requires Marlin.
+ #endif
+
+ #define CLCD_SPI_CS BTN_EN1
+ #define CLCD_MOD_RESET BTN_EN2
+#endif
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/about_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/about_screen.cpp
new file mode 100644
index 0000000000..f27d1401fc
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/about_screen.cpp
@@ -0,0 +1,80 @@
+/********************
+ * about_screen.cpp *
+ ********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+#define GRID_COLS 4
+#define GRID_ROWS 9
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+void AboutScreen::onEntry() {
+ BaseScreen::onEntry();
+ sound.play(chimes, PLAY_ASYNCHRONOUS);
+}
+
+void AboutScreen::onRedraw(draw_mode_t) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .tag(0);
+
+ draw_text_box(cmd, BTN_POS(1,2), BTN_SIZE(4,1), F(
+ #ifdef LULZBOT_LCD_MACHINE_NAME
+ LULZBOT_LCD_MACHINE_NAME
+ #else
+ "Color Touch Panel"
+ #endif
+ ), OPT_CENTER, font_xlarge);
+
+ cmd.tag(2);
+ draw_text_box(cmd, BTN_POS(1,3), BTN_SIZE(4,3), F(
+ #ifdef LULZBOT_LCD_TOOLHEAD_NAME
+ "Firmware for toolhead:\n" LULZBOT_LCD_TOOLHEAD_NAME "\n\n"
+ #endif
+ "(C) 2019 Aleph Objects, Inc.\n\nwww.lulzbot.com"
+ ), OPT_CENTER, font_medium);
+
+ cmd.tag(0);
+ draw_text_box(cmd, BTN_POS(1,6), BTN_SIZE(4,2), progmem_str(getFirmwareName_str()), OPT_CENTER, font_medium);
+
+ cmd.font(font_medium).colors(action_btn).tag(1).button(BTN_POS(2,8), BTN_SIZE(2,1), F("Okay"));
+}
+
+bool AboutScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); return true;
+#if ENABLED(DEVELOPER_SCREENS)
+ case 2: GOTO_SCREEN(DeveloperMenu); return true;
+#endif
+ default: return false;
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp
new file mode 100644
index 0000000000..18159a5bdb
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/advanced_settings_menu.cpp
@@ -0,0 +1,191 @@
+/*****************************
+ * advance_settings_menu.cpp *
+ *****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true));
+ }
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(Theme::font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 9
+ #define GRID_COLS 2
+ #if HAS_BED_PROBE
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("Z Offset "))
+ .enabled(1)
+ .tag(3) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Steps/mm"))
+ #if HAS_TRINAMIC
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(13).button( BTN_POS(1,5), BTN_SIZE(1,1), F("Motor mA"))
+ #if HAS_TRINAMIC
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(14).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Bump Sense"))
+ #if HOTENDS > 1
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(4) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Nozzle Offset"))
+ #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(11).button( BTN_POS(1,3), BTN_SIZE(1,1), F("Filament"))
+ .tag(12).button( BTN_POS(1,6), BTN_SIZE(1,1), F("Endstops"))
+ .tag(15).button( BTN_POS(2,6), BTN_SIZE(1,1), F("Display"))
+ .tag(9) .button( BTN_POS(1,7), BTN_SIZE(2,1), F("Interface Settings"))
+ .tag(10).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Restore Factory Defaults"))
+ .tag(5) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Velocity "))
+ .tag(6) .button( BTN_POS(2,3), BTN_SIZE(1,1), F("Acceleration"))
+ #if ENABLED(JUNCTION_DEVIATION)
+ .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Junc Dev"))
+ #else
+ .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Jerk"))
+ #endif
+ #if ENABLED(BACKLASH_GCODE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(8).button( BTN_POS(2,5), BTN_SIZE(1,1), F("Backlash"))
+ .colors(action_btn)
+ .tag(1) .button( BTN_POS(1,9), BTN_SIZE(2,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ #else
+ #define GRID_ROWS 6
+ #define GRID_COLS 3
+ #if HAS_BED_PROBE
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,2), F("Z Offset "))
+ .enabled(1)
+ .tag(3) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Steps/mm"))
+ #if HAS_TRINAMIC
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(13).button( BTN_POS(3,1), BTN_SIZE(1,1), F("Motor mA"))
+ #if HAS_TRINAMIC
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(14).button( BTN_POS(3,2), BTN_SIZE(1,1), F("Bump Sense"))
+ #if ENABLED(BACKLASH_GCODE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(8).button( BTN_POS(3,3), BTN_SIZE(1,1), F("Backlash"))
+ #if HOTENDS > 1
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(4) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Nozzle Offsets"))
+ .tag(12).button( BTN_POS(3,4), BTN_SIZE(1,1), F("Endstops"))
+ .tag(5) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Velocity "))
+ .tag(6) .button( BTN_POS(2,3), BTN_SIZE(1,1), F("Acceleration"))
+ #if ENABLED(JUNCTION_DEVIATION)
+ .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Junc Dev"))
+ #else
+ .tag(7) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Jerk"))
+ #endif
+ .tag(11).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Filament"))
+ .tag(15).button( BTN_POS(3,5), BTN_SIZE(1,1), F("Display"))
+ .tag(9) .button( BTN_POS(1,5), BTN_SIZE(2,1), F("Interface Settings"))
+ .tag(10).button( BTN_POS(1,6), BTN_SIZE(2,1), F("Restore Defaults"))
+ .colors(action_btn)
+ .tag(1) .button( BTN_POS(3,6), BTN_SIZE(1,1), F("Back"));
+ #endif
+ }
+}
+
+bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: SaveSettingsDialogBox::promptToSaveSettings(); break;
+ #if HAS_BED_PROBE
+ case 2: GOTO_SCREEN(ZOffsetScreen); break;
+ #endif
+ case 3: GOTO_SCREEN(StepsScreen); break;
+ #if HOTENDS > 1
+ case 4: GOTO_SCREEN(NozzleOffsetScreen); break;
+ #endif
+ case 5: GOTO_SCREEN(MaxVelocityScreen); break;
+ case 6: GOTO_SCREEN(DefaultAccelerationScreen); break;
+ case 7:
+ #if ENABLED(JUNCTION_DEVIATION)
+ GOTO_SCREEN(JunctionDeviationScreen);
+ #else
+ GOTO_SCREEN(JerkScreen);
+ #endif
+ break;
+ #if ENABLED(BACKLASH_GCODE)
+ case 8: GOTO_SCREEN(BacklashCompensationScreen); break;
+ #endif
+ case 9: GOTO_SCREEN(InterfaceSettingsScreen); LockScreen::check_passcode(); break;
+ case 10: GOTO_SCREEN(RestoreFailsafeDialogBox); LockScreen::check_passcode(); break;
+ #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ case 11: GOTO_SCREEN(FilamentMenu); break;
+ #endif
+ case 12: GOTO_SCREEN(EndstopStatesScreen); break;
+ #if HAS_TRINAMIC
+ case 13: GOTO_SCREEN(StepperCurrentScreen); break;
+ case 14: GOTO_SCREEN(StepperBumpSensitivityScreen); break;
+ #endif
+ case 15: GOTO_SCREEN(DisplayTuningScreen); break;
+ default: return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/alert_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/alert_dialog_box.cpp
new file mode 100644
index 0000000000..dfc1196010
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/alert_dialog_box.cpp
@@ -0,0 +1,70 @@
+/************************
+ * alert_dialog_box.cpp *
+ ************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void AlertDialogBox::onEntry() {
+ BaseScreen::onEntry();
+ sound.play(screen_data.AlertDialogBox.isError ? sad_trombone : twinkle, PLAY_ASYNCHRONOUS);
+}
+
+void AlertDialogBox::onRedraw(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ drawOkayButton();
+ }
+}
+
+template
+void AlertDialogBox::show(const T message) {
+ drawMessage(message);
+ storeBackground();
+ screen_data.AlertDialogBox.isError = false;
+ GOTO_SCREEN(AlertDialogBox);
+}
+
+template
+void AlertDialogBox::showError(const T message) {
+ drawMessage(message);
+ storeBackground();
+ screen_data.AlertDialogBox.isError = true;
+ GOTO_SCREEN(AlertDialogBox);
+}
+
+void AlertDialogBox::hide() {
+ if (AT_SCREEN(AlertDialogBox))
+ GOTO_PREVIOUS();
+}
+
+template void AlertDialogBox::show(const char *);
+template void AlertDialogBox::show(const progmem_str);
+template void AlertDialogBox::showError(const char *);
+template void AlertDialogBox::showError(const progmem_str);
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp
new file mode 100644
index 0000000000..a09b84b1b0
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/backlash_compensation_screen.cpp
@@ -0,0 +1,72 @@
+/************************************
+ * backlash_compensation_screen.cpp *
+ ************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(BACKLASH_GCODE)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void BacklashCompensationScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(2).units(PSTR("mm"));
+ w.heading( PSTR("Axis Backlash"));
+ w.color(x_axis).adjuster(2, PSTR("X:"), getAxisBacklash_mm(X));
+ w.color(y_axis).adjuster(4, PSTR("Y:"), getAxisBacklash_mm(Y));
+ w.color(z_axis).adjuster(6, PSTR("Z:"), getAxisBacklash_mm(Z));
+ #if ENABLED(CALIBRATION_GCODE)
+ w.button(12, PSTR("Measure automatically"));
+ #endif
+ w.color(other).adjuster(8, PSTR("Smoothing:"), getBacklashSmoothing_mm());
+ w.precision(0).units(PSTR("%"))
+ .adjuster(10, PSTR("Correction:"), getBacklashCorrection_percent());
+ w.precision(2).increments();
+}
+
+bool BacklashCompensationScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(AxisBacklash_mm, X); break;
+ case 3: UI_INCREMENT(AxisBacklash_mm, X); break;
+ case 4: UI_DECREMENT(AxisBacklash_mm, Y); break;
+ case 5: UI_INCREMENT(AxisBacklash_mm, Y); break;
+ case 6: UI_DECREMENT(AxisBacklash_mm, Z); break;
+ case 7: UI_INCREMENT(AxisBacklash_mm, Z); break;
+ case 8: UI_DECREMENT(BacklashSmoothing_mm); break;
+ case 9: UI_INCREMENT(BacklashSmoothing_mm); break;
+ case 10: UI_DECREMENT_BY(BacklashCorrection_percent, increment*100); break;
+ case 11: UI_INCREMENT_BY(BacklashCorrection_percent, increment*100); break;
+ #if ENABLED(CALIBRATION_GCODE)
+ case 12: GOTO_SCREEN(ConfirmAutoCalibrationDialogBox); return true;
+ #endif
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_numeric_adjustment_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_numeric_adjustment_screen.cpp
new file mode 100644
index 0000000000..2fb5c98cba
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_numeric_adjustment_screen.cpp
@@ -0,0 +1,342 @@
+/**************************************
+ * base_numeric_adjustment_screen.cpp *
+ **************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+#ifdef TOUCH_UI_PORTRAIT
+ #define GRID_COLS 13
+ #define GRID_ROWS 10
+#else
+ #define GRID_COLS 18
+ #define GRID_ROWS 7
+#endif
+
+BaseNumericAdjustmentScreen::widgets_t::widgets_t(draw_mode_t what) : _what(what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true));
+ }
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.font(font_medium)
+ .colors(action_btn)
+ #ifdef TOUCH_UI_PORTRAIT
+ .tag(1).button( BTN_POS(1,10), BTN_SIZE(13,1), F("Back"))
+ #else
+ .tag(1).button( BTN_POS(15,7), BTN_SIZE(4,1), F("Back"))
+ #endif
+ .colors(normal_btn);
+ }
+
+ _line = 1;
+ _units = PSTR("");
+}
+
+BaseNumericAdjustmentScreen::widgets_t &BaseNumericAdjustmentScreen::widgets_t::precision(uint8_t decimals, precision_default_t initial) {
+ _decimals = decimals;
+ if (screen_data.BaseNumericAdjustmentScreen.increment == 0) {
+ screen_data.BaseNumericAdjustmentScreen.increment = 243 + (initial - DEFAULT_LOWEST) - _decimals;
+ }
+ return *this;
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::heading(const char *label) {
+ CommandProcessor cmd;
+ cmd.font(font_medium).cmd(COLOR_RGB(bg_text_enabled));
+ if (_what & BACKGROUND) {
+ #ifdef TOUCH_UI_PORTRAIT
+ cmd.tag(0).fgcolor(bg_color).button( BTN_POS(1, _line), BTN_SIZE(12,1), progmem_str(label), OPT_FLAT);
+ #else
+ cmd.tag(0).fgcolor(bg_color).button( BTN_POS(5, _line), BTN_SIZE(8,1), progmem_str(label), OPT_FLAT);
+ #endif
+ }
+
+ _line++;
+}
+
+#ifdef TOUCH_UI_PORTRAIT
+ #ifdef TOUCH_UI_800x480
+ #undef EDGE_R
+ #define EDGE_R 20
+ #else
+ #undef EDGE_R
+ #define EDGE_R 10
+ #endif
+#endif
+
+void BaseNumericAdjustmentScreen::widgets_t::_draw_increment_btn(uint8_t, const uint8_t tag) {
+ CommandProcessor cmd;
+ const char *label = PSTR("?");
+ uint8_t pos;
+ uint8_t & increment = screen_data.BaseNumericAdjustmentScreen.increment;
+
+ if (increment == 0) {
+ increment = tag; // Set the default value to be the first.
+ }
+
+ switch (tag) {
+ case 240: label = PSTR( ".001"); pos = _decimals - 3; break;
+ case 241: label = PSTR( ".01" ); pos = _decimals - 2; break;
+ case 242: label = PSTR( "0.1" ); pos = _decimals - 1; break;
+ case 243: label = PSTR( "1" ); pos = _decimals + 0; break;
+ case 244: label = PSTR( "10" ); pos = _decimals + 1; break;
+ default: label = PSTR("100" ); pos = _decimals + 2; break;
+ }
+
+ cmd.tag(tag)
+ .colors(increment == tag ? action_btn : normal_btn)
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_small);
+ #else
+ .font(font_medium);
+ #endif
+ switch (pos) {
+ #ifdef TOUCH_UI_PORTRAIT
+ case 0: cmd.button( BTN_POS(5,_line), BTN_SIZE(2,1), progmem_str(label)); break;
+ case 1: cmd.button( BTN_POS(7,_line), BTN_SIZE(2,1), progmem_str(label)); break;
+ case 2: cmd.button( BTN_POS(9,_line), BTN_SIZE(2,1), progmem_str(label)); break;
+ #else
+ case 0: cmd.button( BTN_POS(15,2), BTN_SIZE(4,1), progmem_str(label)); break;
+ case 1: cmd.button( BTN_POS(15,3), BTN_SIZE(4,1), progmem_str(label)); break;
+ case 2: cmd.button( BTN_POS(15,4), BTN_SIZE(4,1), progmem_str(label)); break;
+ #endif
+ }
+ cmd.colors(normal_btn);
+}
+
+
+void BaseNumericAdjustmentScreen::widgets_t::increments() {
+ if (_what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.fgcolor(bg_color)
+ .tag(0)
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_small).button( BTN_POS(1, _line), BTN_SIZE(4,1), F("Increment:"), OPT_FLAT);
+ #else
+ .font(font_medium).button( BTN_POS(15,1), BTN_SIZE(4,1), F("Increment:"), OPT_FLAT);
+ #endif
+ }
+
+ if (_what & FOREGROUND) {
+ _draw_increment_btn(_line+1, 245 - _decimals);
+ _draw_increment_btn(_line+1, 244 - _decimals);
+ _draw_increment_btn(_line+1, 243 - _decimals);
+ }
+
+ #ifdef TOUCH_UI_PORTRAIT
+ _line++;
+ #endif
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::adjuster_sram_val(uint8_t tag, const char *label, const char *value, bool is_enabled) {
+ CommandProcessor cmd;
+
+ if (_what & BACKGROUND) {
+ cmd.enabled(1)
+ .font(font_small)
+ .fgcolor(_color) .tag(0).button( BTN_POS(5,_line), BTN_SIZE(5,1), F(""), OPT_FLAT)
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .fgcolor(bg_color) .tag(0).button( BTN_POS(1,_line), BTN_SIZE(4,1), (progmem_str) label, OPT_FLAT);
+ }
+
+ if (_what & FOREGROUND) {
+ cmd.colors(normal_btn)
+ .font(font_medium)
+ .tag(is_enabled ? tag : 0).enabled(is_enabled).button( BTN_POS(10,_line), BTN_SIZE(2,1), F("-"))
+ .tag(is_enabled ? tag+1 : 0).enabled(is_enabled).button( BTN_POS(12,_line), BTN_SIZE(2,1), F("+"))
+ .tag(0).font(font_small) .text ( BTN_POS(5,_line), BTN_SIZE(5,1), is_enabled ? value : "-");
+ }
+
+ _line++;
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::adjuster(uint8_t tag, const char *label, const char *value, bool is_enabled) {
+ if (_what & BACKGROUND) {
+ adjuster_sram_val(tag, label, nullptr);
+ }
+
+ if (_what & FOREGROUND) {
+ char b[strlen_P(value)+1];
+ strcpy_P(b,value);
+ adjuster_sram_val(tag, label, b, is_enabled);
+ }
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::adjuster(uint8_t tag, const char *label, float value, bool is_enabled) {
+ if (_what & BACKGROUND) {
+ adjuster_sram_val(tag, label, nullptr);
+ }
+
+ if (_what & FOREGROUND) {
+ char b[32];
+ dtostrf(value, 5, _decimals, b);
+ strcat_P(b, PSTR(" "));
+ strcat_P(b, (const char*) _units);
+ adjuster_sram_val(tag, label, b, is_enabled);
+ }
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::button(uint8_t tag, const char *label, bool is_enabled) {
+ if (_what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .tag(is_enabled ? tag : 0)
+ .enabled(is_enabled)
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_small)
+ #else
+ .font(font_medium)
+ #endif
+ .button(BTN_POS(5,_line), BTN_SIZE(9,1), progmem_str(label));
+ }
+
+ _line++;
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::text_field(uint8_t tag, const char *label, const char *value, bool is_enabled) {
+ CommandProcessor cmd;
+
+ if (_what & BACKGROUND) {
+ cmd.enabled(1)
+ .font(font_small)
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .fgcolor(_color).tag(0).button( BTN_POS(5,_line), BTN_SIZE(9,1), F(""), OPT_FLAT)
+ .fgcolor(bg_color) .tag(0).button( BTN_POS(1,_line), BTN_SIZE(4,1), (progmem_str) label, OPT_FLAT);
+ }
+
+ if (_what & FOREGROUND) {
+ cmd.colors(normal_btn)
+ .font(font_medium)
+ .tag(tag).font(font_small).text ( BTN_POS(5,_line), BTN_SIZE(9,1), is_enabled ? value : "-");
+ }
+
+ _line++;
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::two_buttons(uint8_t tag1, const char *label1, uint8_t tag2, const char *label2, bool is_enabled) {
+ if (_what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.enabled(is_enabled)
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_small)
+ #else
+ .font(font_medium)
+ #endif
+ .tag(is_enabled ? tag1: 0).button(BTN_POS(5,_line), BTN_SIZE(4.5,1), progmem_str(label1))
+ .tag(is_enabled ? tag2: 0).button(BTN_POS(9.5,_line), BTN_SIZE(4.5,1), progmem_str(label2));
+ }
+
+ _line++;
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::toggle(uint8_t tag, const char *label, const char *text, bool value, bool is_enabled) {
+ if (_what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.fgcolor(bg_color)
+ .tag(0)
+ .font(font_small)
+ #ifdef TOUCH_UI_PORTRAIT
+ .button( BTN_POS(1, _line), BTN_SIZE( 8,1), progmem_str(label), OPT_FLAT);
+ #else
+ .button( BTN_POS(1, _line), BTN_SIZE(10,1), progmem_str(label), OPT_FLAT);
+ #endif
+ }
+
+ if (_what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.tag(is_enabled ? tag : 0)
+ .enabled(is_enabled)
+ .font(font_small)
+ .colors(ui_toggle)
+ #ifdef TOUCH_UI_PORTRAIT
+ .toggle(BTN_POS( 9,_line), BTN_SIZE(5,1), progmem_str(text), value);
+ #else
+ .toggle(BTN_POS(10,_line), BTN_SIZE(4,1), progmem_str(text), value);
+ #endif
+ }
+
+ _line++;
+}
+
+void BaseNumericAdjustmentScreen::widgets_t::home_buttons(uint8_t tag) {
+ if (_what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.fgcolor(bg_color)
+ .tag(0)
+ .font(font_small)
+ .button( BTN_POS(1, _line), BTN_SIZE(4,1), F("Home:"), OPT_FLAT);
+ }
+
+ if (_what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_small)
+ #else
+ .font(font_medium)
+ #endif
+ .tag(tag+0).button(BTN_POS(5,_line), BTN_SIZE(2,1), F("X"))
+ .tag(tag+1).button(BTN_POS(7,_line), BTN_SIZE(2,1), F("Y"))
+ .tag(tag+2).button(BTN_POS(9,_line), BTN_SIZE(2,1), F("Z"))
+ .tag(tag+3).button(BTN_POS(11,_line), BTN_SIZE(3,1), F("All"));
+ }
+
+ _line++;
+}
+
+void BaseNumericAdjustmentScreen::onEntry() {
+ screen_data.BaseNumericAdjustmentScreen.increment = 0; // This will force the increment to be picked while drawing.
+ BaseScreen::onEntry();
+}
+
+bool BaseNumericAdjustmentScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); return true;
+ case 240 ... 245: screen_data.BaseNumericAdjustmentScreen.increment = tag; break;
+ default: return current_screen.onTouchHeld(tag);
+ }
+ return true;
+}
+
+float BaseNumericAdjustmentScreen::getIncrement() {
+ switch (screen_data.BaseNumericAdjustmentScreen.increment) {
+ case 240: return 0.001;
+ case 241: return 0.01;
+ case 242: return 0.1;
+ case 243: return 1.0;
+ case 244: return 10.0;
+ case 245: return 100.0;
+ default: return 0.0;
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_screen.cpp
new file mode 100644
index 0000000000..2a041bf77b
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/base_screen.cpp
@@ -0,0 +1,83 @@
+/*******************
+ * base_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void BaseScreen::onEntry() {
+ CommandProcessor cmd;
+ cmd.set_button_style_callback(buttonStyleCallback);
+ UIScreen::onEntry();
+}
+
+bool BaseScreen::buttonStyleCallback(CommandProcessor &cmd, uint8_t tag, uint8_t &style, uint16_t &options, bool post) {
+ if (post) {
+ cmd.colors(normal_btn);
+ return false;
+ }
+
+ #ifdef LCD_TIMEOUT_TO_STATUS
+ if (EventLoop::get_pressed_tag() != 0) {
+ reset_menu_timeout();
+ }
+ #endif
+
+ if (tag != 0 && EventLoop::get_pressed_tag() == tag) {
+ options = OPT_FLAT;
+ }
+
+ if (style & cmd.STYLE_DISABLED) {
+ cmd.tag(0);
+ style &= ~cmd.STYLE_DISABLED;
+ cmd.colors(disabled_btn);
+ return true; // Call me again to reset the colors
+ }
+ return false;
+}
+
+void BaseScreen::onIdle() {
+ #ifdef LCD_TIMEOUT_TO_STATUS
+ const uint32_t elapsed = millis() - last_interaction;
+ if (elapsed > uint32_t(LCD_TIMEOUT_TO_STATUS) * 1000) {
+ reset_menu_timeout();
+ GOTO_SCREEN(StatusScreen);
+ }
+ #endif
+}
+
+void BaseScreen::reset_menu_timeout() {
+ #ifdef LCD_TIMEOUT_TO_STATUS
+ last_interaction = millis();
+ #endif
+}
+
+#ifdef LCD_TIMEOUT_TO_STATUS
+ uint32_t BaseScreen::last_interaction;
+#endif
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_advanced_settings.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_advanced_settings.cpp
new file mode 100644
index 0000000000..1fddbd6541
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_advanced_settings.cpp
@@ -0,0 +1,137 @@
+/*****************************
+ * bio_advanced_settings.cpp *
+ *****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void AdvancedSettingsMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true));
+ }
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(Theme::font_medium)
+ #define GRID_ROWS 9
+ #define GRID_COLS 2
+
+ .tag(2) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("Display"))
+ #if HAS_TRINAMIC
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(3) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Motor mA"))
+ #if HAS_TRINAMIC
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(4) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Bump Sense"))
+ .tag(5) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("Endstops"))
+ #if HOTENDS > 1
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(6) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("Nozzle Offset"))
+
+
+ .tag(7) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Steps/mm"))
+ .tag(8) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Velocity "))
+ .tag(9) .button( BTN_POS(2,3), BTN_SIZE(1,1), F("Acceleration"))
+ #if ENABLED(JUNCTION_DEVIATION)
+ .tag(10) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Junc Dev"))
+ #else
+ .tag(10) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Jerk"))
+ #endif
+ #if ENABLED(BACKLASH_GCODE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(11) .button( BTN_POS(2,5), BTN_SIZE(1,1), F("Backlash"))
+ #if ENABLED(LIN_ADVANCE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(12) .button( BTN_POS(1,6), BTN_SIZE(2,1), F("Linear Advance"))
+ .tag(13) .button( BTN_POS(1,7), BTN_SIZE(2,1), F("Interface Settings"))
+ .tag(14) .button( BTN_POS(1,8), BTN_SIZE(2,1), F("Restore Factory Defaults"))
+ .colors(action_btn)
+ .tag(1). button( BTN_POS(1,9), BTN_SIZE(2,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ }
+}
+
+bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) {
+ using namespace ExtUI;
+
+ switch (tag) {
+ case 1: SaveSettingsDialogBox::promptToSaveSettings(); break;
+ case 2: GOTO_SCREEN(DisplayTuningScreen); break;
+ #if HAS_TRINAMIC
+ case 3: GOTO_SCREEN(StepperCurrentScreen); break;
+ case 4: GOTO_SCREEN(StepperBumpSensitivityScreen); break;
+ #endif
+ case 5: GOTO_SCREEN(EndstopStatesScreen); break;
+ #if HOTENDS > 1
+ case 6: GOTO_SCREEN(NozzleOffsetScreen); break;
+ #endif
+
+ case 7: GOTO_SCREEN(StepsScreen); break;
+ case 8: GOTO_SCREEN(MaxVelocityScreen); break;
+ case 9: GOTO_SCREEN(DefaultAccelerationScreen); break;
+ case 10:
+ #if ENABLED(JUNCTION_DEVIATION)
+ GOTO_SCREEN(JunctionDeviationScreen);
+ #else
+ GOTO_SCREEN(JerkScreen);
+ #endif
+ break;
+ #if ENABLED(BACKLASH_GCODE)
+ case 11: GOTO_SCREEN(BacklashCompensationScreen); break;
+ #endif
+ #if ENABLED(LIN_ADVANCE)
+ case 12: GOTO_SCREEN(LinearAdvanceScreen); break;
+ #endif
+ case 13: GOTO_SCREEN(InterfaceSettingsScreen); break;
+ case 14: GOTO_SCREEN(RestoreFailsafeDialogBox); break;
+
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_e.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_e.cpp
new file mode 100644
index 0000000000..c106db2422
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_e.cpp
@@ -0,0 +1,56 @@
+/****************************
+ * bio_confirm_home_xyz.cpp *
+ ****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+
+void BioConfirmHomeE::onRedraw(draw_mode_t) {
+ drawMessage(F("About to re-home plunger and auto-level. Remove syringe prior to proceeding.\n\nContinue?"));
+ drawYesNoButtons(1);
+}
+
+bool BioConfirmHomeE::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ SpinnerDialogBox::enqueueAndWait_P(F(
+ "G112\n" /* Home extruder */
+ LULZBOT_AXIS_LEVELING_COMMANDS /* Level X axis */
+ "G0 X115 Z50 F6000\n" /* Goto loading position */
+ "M400\n" /* Wait for moves to finish */
+ "M18 X Y" /* Unlock motors */
+ ));
+ current_screen.forget();
+ break;
+ case 2:
+ GOTO_SCREEN(StatusScreen);
+ break;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+ return true;
+}
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_xyz.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_xyz.cpp
new file mode 100644
index 0000000000..dbd04fc359
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_confirm_home_xyz.cpp
@@ -0,0 +1,53 @@
+/****************************
+ * bio_confirm_home_xyz.cpp *
+ ****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+
+void BioConfirmHomeXYZ::onRedraw(draw_mode_t) {
+ drawMessage(F("About to home to loading position.\nEnsure the top and the bed of the printer are clear.\n\nContinue?"));
+ drawYesNoButtons(1);
+}
+
+bool BioConfirmHomeXYZ::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ SpinnerDialogBox::enqueueAndWait_P(F(
+ "G28 X Y Z\n" /* Home all axis */
+ "G0 X115 Z50 F6000" /* Move to park position */
+ ));
+ current_screen.forget();
+ break;
+ case 2:
+ GOTO_SCREEN(StatusScreen);
+ break;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+ return true;
+}
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_main_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_main_menu.cpp
new file mode 100644
index 0000000000..0a42bc5804
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_main_menu.cpp
@@ -0,0 +1,79 @@
+/*********************
+ * bio_main_menu.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void MainMenu::onRedraw(draw_mode_t what) {
+ #define GRID_ROWS 8
+ #define GRID_COLS 2
+
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true));
+ }
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(COLOR_RGB(bg_text_enabled))
+ .font(font_large).text( BTN_POS(1,1), BTN_SIZE(2,1), F("Main Menu"))
+ .colors(normal_btn)
+ .font(font_medium)
+ .tag(2).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Load Syringe"))
+ .tag(3).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Unlock XY Axis"))
+ .tag(4).button( BTN_POS(1,4), BTN_SIZE(2,1), F("Bed Temperature"))
+ .tag(5).button( BTN_POS(1,5), BTN_SIZE(2,1), F("Interface Settings"))
+ .tag(6).button( BTN_POS(1,6), BTN_SIZE(2,1), F("Advanced Settings"))
+ .tag(7).button( BTN_POS(1,7), BTN_SIZE(2,1), F("About Printer"))
+ .colors(action_btn)
+ .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back"));
+ }
+
+ #undef GRID_COLS
+ #undef GRID_ROWS
+}
+
+bool MainMenu::onTouchEnd(uint8_t tag) {
+ using namespace ExtUI;
+
+ switch (tag) {
+ case 1: SaveSettingsDialogBox::promptToSaveSettings(); break;
+ case 2: GOTO_SCREEN(BioConfirmHomeXYZ); break;
+ case 3: StatusScreen::unlockMotors(); break;
+ case 4: GOTO_SCREEN(TemperatureScreen); break;
+ case 5: GOTO_SCREEN(InterfaceSettingsScreen); break;
+ case 6: GOTO_SCREEN(AdvancedSettingsMenu); break;
+ case 7: GOTO_SCREEN(AboutScreen); break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printer_ui.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printer_ui.h
new file mode 100644
index 0000000000..6ff6c8a467
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printer_ui.h
@@ -0,0 +1,75 @@
+
+/****************************************************************************
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/**
+ * This file was auto-generated using "svg2cpp.pl"
+ *
+ * The encoding consists of x,y pairs with the min and max scaled to
+ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
+ * start of a new closed path.
+ */
+
+#pragma once
+
+constexpr float x_min = 0.000000;
+
+constexpr float x_max = 272.000000;
+
+constexpr float y_min = 0.000000;
+
+constexpr float y_max = 480.000000;
+
+const PROGMEM uint16_t z_neg[] = {0xC9B1, 0x96B3, 0xD990, 0x96B3, 0xD990, 0xA8D0, 0xE17F, 0xA8D0, 0xD1A0, 0xB1DF, 0xC1C2, 0xA8D0, 0xC9B1, 0xA8D0, 0xC9B1, 0x96B3};
+
+const PROGMEM uint16_t z_pos[] = {0xC9B1, 0x8DA4, 0xD990, 0x8DA4, 0xD990, 0x7B86, 0xE17F, 0x7B86, 0xD1A0, 0x7277, 0xC1C2, 0x7B86, 0xC9B1, 0x7B86, 0xC9B1, 0x8DA4};
+
+const PROGMEM uint16_t y_neg[] = {0x5037, 0x9979, 0x6264, 0x9979, 0x5529, 0xA92A, 0x5E3F, 0xA92A, 0x4575, 0xB103, 0x39E6, 0xA92A, 0x42FC, 0xA92A, 0x5037, 0x9979};
+
+const PROGMEM uint16_t y_pos[] = {0x5D72, 0x89C7, 0x6F9F, 0x89C7, 0x7CDA, 0x7A15, 0x85F0, 0x7A15, 0x7A61, 0x723D, 0x6197, 0x7A15, 0x6AAD, 0x7A15, 0x5D72, 0x89C7};
+
+const PROGMEM uint16_t x_neg[] = {0x513D, 0x8DB3, 0x4AA0, 0x958C, 0x2647, 0x958C, 0x22F8, 0x9979, 0x1769, 0x91A0, 0x3033, 0x89C7, 0x2CE4, 0x8DB3, 0x513D, 0x8DB3};
+
+const PROGMEM uint16_t x_pos[] = {0x7566, 0x8DB3, 0x6EC9, 0x958C, 0x9322, 0x958C, 0x8FD4, 0x9979, 0xA89E, 0x91A0, 0x9D0E, 0x89C7, 0x99C0, 0x8DB3, 0x7566, 0x8DB3};
+
+const PROGMEM uint16_t syringe_fluid[] = {0x7D1D, 0x4A0F, 0x87FC, 0x4C0E, 0x8CF4, 0x4C0E, 0x9801, 0x4A0F, 0x9801, 0x1AA2, 0x7D1D, 0x1AA2, 0x7D1D, 0x4A0F};
+
+const PROGMEM uint16_t syringe[] = {0x83C2, 0x42AA, 0x83C2, 0x43FF, 0x8D2C, 0x43FF, 0x8D2C, 0x42AA, 0xFFFF, 0x83C2, 0x3D54, 0x83C2, 0x3EAA, 0x8D2C, 0x3EAA, 0x8D2C, 0x3D54, 0xFFFF, 0x83C2, 0x37FF, 0x83C2, 0x3954, 0x8D2C, 0x3954, 0x8D2C, 0x37FF, 0xFFFF, 0x83C2, 0x32AA, 0x83C2, 0x33FF, 0x8D2C, 0x33FF, 0x8D2C, 0x32AA, 0xFFFF, 0x83C2, 0x2D54, 0x83C2, 0x2EAA, 0x8D2C, 0x2EAA, 0x8D2C, 0x2D54, 0xFFFF, 0x83C2, 0x27FF, 0x83C2, 0x2955, 0x8D2C, 0x2955, 0x8D2C, 0x27FF, 0xFFFF, 0x83C2, 0x22AA, 0x83C2, 0x23FF, 0x8D2C, 0x23FF, 0x8D2C, 0x22AA, 0xFFFF, 0x7AC7, 0x0F4B, 0x7AC7, 0x134A, 0x855B, 0x134A, 0x855B, 0x1949, 0x7AC7, 0x1949, 0x7AC7, 0x4B40, 0x855B, 0x4D40, 0x855B, 0x533F, 0x88E2, 0x533F, 0x88E2, 0x653C, 0x8C69, 0x673C, 0x8C69, 0x533F, 0x8FF0, 0x533F, 0x8FF0, 0x4D40, 0x9A85, 0x4B40, 0x9A85, 0x1949, 0x8FF0, 0x1949, 0x8FF0, 0x134A, 0x9A85, 0x134A, 0x9A85, 0x0F4B, 0xFFFF, 0x88E2, 0x134A, 0x8C69, 0x134A, 0x8C69, 0x1949, 0x88E2, 0x1949, 0x88E2, 0x134A, 0xFFFF, 0x7E4D, 0x1B49, 0x96FE, 0x1B49, 0x96FE, 0x4941, 0x8C69, 0x4B40, 0x88E2, 0x4B40, 0x7E4D, 0x4941, 0x7E4D, 0x1B49};
+
+const PROGMEM uint16_t syringe_outline[] = {0x7AC7, 0x0F4B, 0x7AC7, 0x134A, 0x855B, 0x134A, 0x855B, 0x1949, 0x7AC7, 0x1949, 0x7AC7, 0x4B40, 0x855B, 0x4D40, 0x855B, 0x533F, 0x88E2, 0x533F, 0x88E2, 0x653C, 0x8C69, 0x673C, 0x8C69, 0x533F, 0x8FF0, 0x533F, 0x8FF0, 0x4D40, 0x9A85, 0x4B40, 0x9A85, 0x1949, 0x8FF0, 0x1949, 0x8FF0, 0x134A, 0x9A85, 0x134A, 0x9A85, 0x0F4B, 0x7AC7, 0x0F4B};
+
+const PROGMEM uint16_t padlock[] = {0x645A, 0x8017, 0x5F9E, 0x80A1, 0x5BBA, 0x821B, 0x5911, 0x844A, 0x580A, 0x86F7, 0x580A, 0x8931, 0x5970, 0x8A98, 0x5C49, 0x8A98, 0x5DB0, 0x8931, 0x5DB0, 0x8703, 0x5E3C, 0x858E, 0x5FAA, 0x845F, 0x61C5, 0x8394, 0x645A, 0x834A, 0x66F0, 0x8394, 0x690C, 0x845F, 0x6A7A, 0x858D, 0x6B07, 0x8703, 0x6B07, 0x8F23, 0x57C8, 0x8F23, 0x551E, 0x8FC3, 0x5404, 0x9145, 0x5404, 0x9C8F, 0x551E, 0x9E11, 0x57C8, 0x9EB1, 0x70EE, 0x9EB1, 0x7398, 0x9E11, 0x74B2, 0x9C8F, 0x74B2, 0x9145, 0x7398, 0x8FC3, 0x70EE, 0x8F23, 0x70AC, 0x86FA, 0x6FA5, 0x844A, 0x6CFD, 0x821B, 0x6917, 0x80A1};
+
+const PROGMEM uint16_t home_z[] = {0xD6C9, 0x80CC, 0xBB53, 0x905B, 0xC231, 0x905B, 0xC231, 0x9FEB, 0xCFEC, 0x9FEB, 0xCFEC, 0x9823, 0xDDA7, 0x9823, 0xDDA7, 0x9FEB, 0xEB62, 0x9FEB, 0xEB62, 0x905B, 0xF240, 0x905B, 0xE7A3, 0x8A58, 0xE7A3, 0x82CD, 0xE0C6, 0x82CD, 0xE0C6, 0x8674};
+
+const PROGMEM uint16_t home_e[] = {0xB94F, 0x25AA, 0x9DD8, 0x353A, 0xA4B6, 0x353A, 0xA4B6, 0x44C9, 0xB271, 0x44C9, 0xB271, 0x3D02, 0xC02C, 0x3D02, 0xC02C, 0x44C9, 0xCDE7, 0x44C9, 0xCDE7, 0x353A, 0xD4C5, 0x353A, 0xCA28, 0x2F36, 0xCA28, 0x27AB, 0xC34B, 0x27AB, 0xC34B, 0x2B53};
+
+const PROGMEM uint16_t bed_icon[] = {0x1764, 0x2C4C, 0x6135, 0x2C4C, 0x6135, 0x40A8, 0x1764, 0x40A8};
+
+const PROGMEM uint16_t actual_temp[] = {0x1764, 0x466F, 0x6135, 0x466F, 0x6135, 0x5ACB, 0x1764, 0x5ACB};
+
+const PROGMEM uint16_t target_temp[] = {0x1764, 0x1228, 0x6135, 0x1228, 0x6135, 0x2684, 0x1764, 0x2684};
+
+const PROGMEM uint16_t fine_label[] = {0x1AA7, 0xC6D2, 0x9387, 0xC6D2, 0x9387, 0xD316, 0x1AA7, 0xD316};
+
+const PROGMEM uint16_t fine_toggle[] = {0x9C10, 0xC6D2, 0xE4A3, 0xC6D2, 0xE4A3, 0xD316, 0x9C10, 0xD316};
+
+const PROGMEM uint16_t usb_btn[] = {0x0B68, 0xE880, 0x7B1A, 0xE880, 0x7B1A, 0xF94B, 0x0B68, 0xF94B, 0x0B68, 0xE880};
+
+const PROGMEM uint16_t menu_btn[] = {0x84E3, 0xE880, 0xF495, 0xE880, 0xF495, 0xF94B, 0x84E3, 0xF94B, 0x84E3, 0xE880};
+
+const PROGMEM uint16_t e_pos[] = {0xC9B1, 0x3B2D, 0xD990, 0x3B2D, 0xD990, 0x4D4B, 0xE17F, 0x4D4B, 0xD1A0, 0x565A, 0xC1C2, 0x4D4B, 0xC9B1, 0x4D4B, 0xC9B1, 0x3B2D};
+
+const PROGMEM uint16_t e_neg[] = {0xC9B1, 0x321E, 0xD990, 0x321E, 0xD990, 0x2000, 0xE17F, 0x2000, 0xD1A0, 0x16F1, 0xC1C2, 0x2000, 0xC9B1, 0x2000, 0xC9B1, 0x321E};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printing_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printing_dialog_box.cpp
new file mode 100644
index 0000000000..e77f047848
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_printing_dialog_box.cpp
@@ -0,0 +1,155 @@
+/*******************************
+ * bio_printing_dialog_box.cpp *
+ *******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+#include "../ftdi_eve_lib/extras/circular_progress.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+#define GRID_COLS 2
+#define GRID_ROWS 9
+
+void BioPrintingDialogBox::draw_status_message(draw_mode_t what, const char* message) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(COLOR_RGB(bg_text_enabled));
+ draw_text_box(cmd, BTN_POS(1,2), BTN_SIZE(2,2), message, OPT_CENTER, font_large);
+ }
+}
+
+void BioPrintingDialogBox::draw_progress(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.font(font_large)
+ .text(BTN_POS(1,1), BTN_SIZE(2,2), isPrinting() ? F("Printing...") : F("Finished."))
+ .tag(1)
+ .font(font_xlarge);
+
+ draw_circular_progress(cmd, BTN_POS(1,4), BTN_SIZE(2,3), getProgress_percent(), theme_dark, theme_darkest);
+ }
+}
+
+void BioPrintingDialogBox::draw_time_remaining(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ const uint32_t elapsed = getProgress_seconds_elapsed();
+ const uint8_t hrs = elapsed/3600;
+ const uint8_t min = (elapsed/60)%60;
+
+ char time_str[10];
+ sprintf_P(time_str, PSTR("%02dh %02dm"), hrs, min);
+
+ CommandProcessor cmd;
+ cmd.font(font_large)
+ .text(BTN_POS(1,7), BTN_SIZE(2,2), time_str);
+ }
+}
+
+void BioPrintingDialogBox::draw_interaction_buttons(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(font_medium)
+ .colors(isPrinting() ? action_btn : normal_btn)
+ .tag(2).button(BTN_POS(1,9), BTN_SIZE(1,1), F("Menu"))
+ #if ENABLED(SDSUPPORT)
+ .enabled(isPrinting() ? isPrintingFromMedia() : 1)
+ #else
+ .enabled(isPrinting() ? 0 : 1)
+ #endif
+ .tag(3)
+ .colors(isPrinting() ? normal_btn : action_btn)
+ .button( BTN_POS(2,9), BTN_SIZE(1,1), isPrinting() ? F("Cancel") : F("Back"));
+ }
+}
+
+void BioPrintingDialogBox::onRedraw(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ draw_progress(FOREGROUND);
+ draw_time_remaining(FOREGROUND);
+ draw_interaction_buttons(FOREGROUND);
+ }
+}
+
+bool BioPrintingDialogBox::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_SCREEN(FeedratePercentScreen); break;
+ case 2: GOTO_SCREEN(TuneMenu); break;
+ case 3:
+ if (isPrinting()) {
+ GOTO_SCREEN(ConfirmAbortPrintDialogBox);
+ } else {
+ GOTO_SCREEN(StatusScreen);
+ }
+ break;
+ default: return false;
+ }
+ return true;
+}
+
+void BioPrintingDialogBox::setStatusMessage(progmem_str message) {
+ char buff[strlen_P((const char * const)message)+1];
+ strcpy_P(buff, (const char * const) message);
+ setStatusMessage(buff);
+}
+
+void BioPrintingDialogBox::setStatusMessage(const char* message) {
+ CommandProcessor cmd;
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true));
+
+ draw_status_message(BACKGROUND, message);
+ draw_progress(BACKGROUND);
+ draw_time_remaining(BACKGROUND);
+ draw_interaction_buttons(BACKGROUND);
+ storeBackground();
+
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPAIR("New status message: ", message);
+ #endif
+
+ if (AT_SCREEN(BioPrintingDialogBox)) {
+ current_screen.onRefresh();
+ }
+}
+
+void BioPrintingDialogBox::onIdle() {
+ if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) {
+ onRefresh();
+ refresh_timer.start();
+ }
+ BaseScreen::onIdle();
+}
+
+void BioPrintingDialogBox::show() {
+ GOTO_SCREEN(BioPrintingDialogBox);
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp
new file mode 100644
index 0000000000..7e119a5e17
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_status_screen.cpp
@@ -0,0 +1,349 @@
+/*************************
+ * bio_status_screen.cpp *
+ *************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+#include "../ftdi_eve_lib/extras/poly_ui.h"
+#include "bio_printer_ui.h"
+
+#define E_TRAVEL_LIMIT 60
+
+#define GRID_COLS 2
+#define GRID_ROWS 9
+
+#define POLY(A) PolyUI::poly_reader_t(A, sizeof(A)/sizeof(A[0]))
+
+#if ENABLED(SDSUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP)
+ #include "../../../../sd/cardreader.h"
+#endif
+
+const uint8_t shadow_depth = 5;
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+float StatusScreen::increment;
+bool StatusScreen::jog_xy;
+bool StatusScreen::fine_motion;
+
+void StatusScreen::unlockMotors() {
+ injectCommands_P(PSTR("M84 XY"));
+ jog_xy = false;
+}
+
+void StatusScreen::draw_temperature(draw_mode_t what) {
+ CommandProcessor cmd;
+ PolyUI ui(cmd, what);
+
+ int16_t x, y, h, v;
+
+ cmd.tag(15);
+
+ if (what & BACKGROUND) {
+ cmd.cmd(COLOR_RGB(bg_color));
+
+ // Draw touch surfaces
+ ui.bounds(POLY(target_temp), x, y, h, v);
+ cmd.rectangle(x, y, h, v);
+ ui.bounds(POLY(actual_temp), x, y, h, v);
+ cmd.rectangle(x, y, h, v);
+ ui.bounds(POLY(bed_icon), x, y, h, v);
+ cmd.rectangle(x, y, h, v);
+
+ // Draw bed icon
+ cmd.cmd(BITMAP_SOURCE(Bed_Heat_Icon_Info))
+ .cmd(BITMAP_LAYOUT(Bed_Heat_Icon_Info))
+ .cmd(BITMAP_SIZE (Bed_Heat_Icon_Info))
+ .cmd(COLOR_RGB(shadow_rgb))
+ .icon (x + 2, y + 2, h, v, Bed_Heat_Icon_Info, icon_scale * 2)
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .icon (x, y, h, v, Bed_Heat_Icon_Info, icon_scale * 2);
+ }
+
+ if (what & FOREGROUND) {
+ char bed_str[15];
+
+ cmd.font(font_xlarge)
+ .cmd(COLOR_RGB(bg_text_enabled));
+
+ if (!isHeaterIdle(BED) && getTargetTemp_celsius(BED) > 0) {
+ sprintf_P(bed_str, PSTR("%-3d C"), ROUND(getTargetTemp_celsius(BED)));
+ ui.bounds(POLY(target_temp), x, y, h, v);
+ cmd.text(x, y, h, v, bed_str);
+ }
+
+ sprintf_P(bed_str, PSTR("%-3d C"), ROUND(getActualTemp_celsius(BED)));
+ ui.bounds(POLY(actual_temp), x, y, h, v);
+ cmd.text(x, y, h, v, bed_str);
+ }
+}
+
+void StatusScreen::draw_syringe(draw_mode_t what) {
+ int16_t x, y, h, v;
+ const float fill_level = 1.0 - min(1.0, max(0.0, getAxisPosition_mm(E0) / E_TRAVEL_LIMIT));
+ const bool e_homed = isAxisPositionKnown(E0);
+
+ CommandProcessor cmd;
+ PolyUI ui(cmd, what);
+
+ if (what & BACKGROUND) {
+ // Paint the shadow for the syringe
+ ui.color(shadow_rgb);
+ ui.shadow(POLY(syringe_outline), shadow_depth);
+ }
+
+ if (what & FOREGROUND && e_homed) {
+ // Paint the syringe icon
+ ui.color(syringe_rgb);
+ ui.fill(POLY(syringe_outline));
+
+ ui.color(fill_rgb);
+ ui.bounds(POLY(syringe_fluid), x, y, h, v);
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(SCISSOR_XY(x,y + v * (1.0 - fill_level)));
+ cmd.cmd(SCISSOR_SIZE(h, v * fill_level));
+ ui.fill(POLY(syringe_fluid), false);
+ cmd.cmd(RESTORE_CONTEXT());
+
+ ui.color(stroke_rgb);
+ ui.fill(POLY(syringe));
+ }
+}
+
+void StatusScreen::draw_arrows(draw_mode_t what) {
+ const bool e_homed = isAxisPositionKnown(E0);
+ const bool z_homed = isAxisPositionKnown(Z);
+
+ CommandProcessor cmd;
+ PolyUI ui(cmd, what);
+
+ ui.button_fill (fill_rgb);
+ ui.button_stroke(stroke_rgb, 28);
+ ui.button_shadow(shadow_rgb, shadow_depth);
+
+ if ((what & BACKGROUND) || jog_xy) {
+ ui.button(1, POLY(x_neg));
+ ui.button(2, POLY(x_pos));
+ ui.button(3, POLY(y_neg));
+ ui.button(4, POLY(y_pos));
+ }
+
+ if ((what & BACKGROUND) || z_homed) {
+ ui.button(5, POLY(z_neg));
+ ui.button(6, POLY(z_pos));
+ }
+
+ if ((what & BACKGROUND) || e_homed) {
+ ui.button(7, POLY(e_neg));
+ ui.button(8, POLY(e_pos));
+ }
+}
+
+void StatusScreen::draw_fine_motion(draw_mode_t what) {
+ int16_t x, y, h, v;
+ CommandProcessor cmd;
+ PolyUI ui(cmd, what);
+
+ cmd.font(font_medium)
+ .tag(16);
+
+ if (what & BACKGROUND) {
+
+ ui.bounds(POLY(fine_label), x, y, h, v);
+ cmd.cmd(COLOR_RGB(bg_text_enabled))
+ .text(x, y, h, v, F("Fine motion:"));
+ }
+
+ if (what & FOREGROUND) {
+ ui.bounds(POLY(fine_toggle), x, y, h, v);
+ cmd.colors(ui_toggle)
+ .toggle(x, y, h, v, F("no\xFFyes"), fine_motion);
+ }
+}
+
+void StatusScreen::draw_overlay_icons(draw_mode_t what) {
+ const bool e_homed = isAxisPositionKnown(E0);
+ const bool z_homed = isAxisPositionKnown(Z);
+
+ CommandProcessor cmd;
+ PolyUI ui(cmd, what);
+
+ if (what & FOREGROUND) {
+ ui.button_fill (fill_rgb);
+ ui.button_stroke(stroke_rgb, 28);
+ ui.button_shadow(shadow_rgb, shadow_depth);
+
+ if (!jog_xy) {
+ ui.button(12, POLY(padlock));
+ }
+
+ if (!e_homed) {
+ ui.button(13, POLY(home_e));
+ }
+
+ if (!z_homed) {
+ ui.button(14, POLY(home_z));
+ }
+ }
+}
+
+void StatusScreen::draw_buttons(draw_mode_t) {
+ const bool has_media = isMediaInserted() && !isPrintingFromMedia();
+
+ CommandProcessor cmd;
+
+ cmd.font(font_medium)
+ .colors(normal_btn)
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP)
+ .enabled(!Sd2Card::ready() || has_media)
+ #else
+ .enabled(has_media)
+ #endif
+ .colors(has_media ? action_btn : normal_btn)
+ .tag(9).button(BTN_POS(1,9), BTN_SIZE(1,1),
+ isPrintingFromMedia() ?
+ F("Printing") :
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
+ #ifdef LULZBOT_MANUAL_USB_STARTUP
+ (Sd2Card::ready() ? F("USB Drive") : F("Enable USB"))
+ #else
+ F("USB Drive")
+ #endif
+ #else
+ F("SD Card")
+ #endif
+ );
+
+ cmd.colors(!has_media ? action_btn : normal_btn).tag(10).button(BTN_POS(2,9), BTN_SIZE(1,1), F("Menu"));
+}
+
+void StatusScreen::onStartup() {
+ // Load the bitmaps for the status screen
+ constexpr uint32_t base = ftdi_memory_map::RAM_G;
+ CLCD::mem_write_pgm(base + Bed_Heat_Icon_Info.RAMG_offset, Bed_Heat_Icon, sizeof(Bed_Heat_Icon));
+}
+
+void StatusScreen::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color));
+ cmd.cmd(CLEAR(true,true,true));
+ }
+
+ draw_syringe(what);
+ draw_temperature(what);
+ draw_arrows(what);
+ draw_overlay_icons(what);
+ draw_buttons(what);
+ draw_fine_motion(what);
+}
+
+bool StatusScreen::onTouchStart(uint8_t) {
+ increment = fine_motion ? 0.25 : 1;
+ return true;
+}
+
+bool StatusScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 12:
+ if (!jog_xy) {
+ jog_xy = true;
+ injectCommands_P(PSTR("M17"));
+ }
+ break;
+ case 9:
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP)
+ if (!Sd2Card::ready()) {
+ StatusScreen::setStatusMessage(F("Insert USB drive..."));
+ Sd2Card::usbStartup();
+ } else {
+ GOTO_SCREEN(FilesScreen);
+ }
+ #else
+ GOTO_SCREEN(FilesScreen);
+ #endif
+ break;
+ case 10: GOTO_SCREEN(MainMenu); break;
+ case 13: SpinnerDialogBox::enqueueAndWait_P(F("G112")); break;
+ case 14: SpinnerDialogBox::enqueueAndWait_P(F("G28 Z")); break;
+ case 15: GOTO_SCREEN(TemperatureScreen); break;
+ case 16: fine_motion = !fine_motion; break;
+ default: return false;
+ }
+ // If a passcode is enabled, the LockScreen will prevent the
+ // user from proceeding.
+ LockScreen::check_passcode();
+ return true;
+}
+
+bool StatusScreen::onTouchHeld(uint8_t tag) {
+ if (tag >= 1 && tag <= 4 && !jog_xy) return false;
+ if (ExtUI::isMoving()) return false; // Don't allow moves to accumulate
+ #define UI_INCREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_INCREMENT(AxisPosition_mm, axis);
+ #define UI_DECREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_DECREMENT(AxisPosition_mm, axis);
+ switch (tag) {
+ case 1: UI_DECREMENT_AXIS(X); break;
+ case 2: UI_INCREMENT_AXIS(X); break;
+ case 4: UI_DECREMENT_AXIS(Y); break; // NOTE: Y directions inverted because bed rather than needle moves
+ case 3: UI_INCREMENT_AXIS(Y); break;
+ case 5: UI_DECREMENT_AXIS(Z); break;
+ case 6: UI_INCREMENT_AXIS(Z); break;
+ case 7: UI_DECREMENT_AXIS(E0); break;
+ case 8: UI_INCREMENT_AXIS(E0); break;
+ default: return false;
+ }
+ #undef UI_DECREMENT_AXIS
+ #undef UI_INCREMENT_AXIS
+ if (increment < 10 && !fine_motion)
+ increment += 0.5;
+ current_screen.onRefresh();
+ return false;
+}
+
+void StatusScreen::setStatusMessage(progmem_str pstr) {
+ BioPrintingDialogBox::setStatusMessage(pstr);
+}
+
+void StatusScreen::setStatusMessage(const char * const str) {
+ BioPrintingDialogBox::setStatusMessage(str);
+}
+
+void StatusScreen::onIdle() {
+ if (isPrintingFromMedia())
+ BioPrintingDialogBox::show();
+
+ if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) {
+ onRefresh();
+ refresh_timer.start();
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_tune_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_tune_menu.cpp
new file mode 100644
index 0000000000..09aedbd337
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/bio_tune_menu.cpp
@@ -0,0 +1,87 @@
+/*********************
+ * bio_tune_menu.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+void TuneMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .font(font_medium);
+ }
+
+ #define GRID_ROWS 8
+ #define GRID_COLS 2
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(COLOR_RGB(bg_text_enabled))
+ .font(font_large).text ( BTN_POS(1,1), BTN_SIZE(2,1), F("Print Menu"))
+ .colors(normal_btn)
+ .font(font_medium)
+ .enabled(!isPrinting()).tag(2).button( BTN_POS(1,2), BTN_SIZE(2,1), isPrinting() ? F("Printing...") : F("Print Again"))
+ .enabled( isPrinting()).tag(3).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Print Speed"))
+ .tag(4).button( BTN_POS(1,4), BTN_SIZE(2,1), F("Bed Temperature"))
+ #if ENABLED(BABYSTEPPING)
+ .enabled(true)
+ #else
+ .enabled(false)
+ #endif
+ .tag(5).button( BTN_POS(1,5), BTN_SIZE(2,1), F("Nudge Nozzle"))
+ .enabled(!isPrinting()).tag(6).button( BTN_POS(1,6), BTN_SIZE(2,1), F("Load Syringe"))
+ .enabled(!isPrinting()).tag(7).button( BTN_POS(1,7), BTN_SIZE(2,1), F("Unlock XY Axis"))
+ .colors(action_btn) .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back"));
+ }
+ #undef GRID_COLS
+ #undef GRID_ROWS
+}
+
+bool TuneMenu::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ case 2: {
+ FileList files;
+ printFile(files.shortFilename());
+ GOTO_PREVIOUS();
+ break;
+ }
+ case 3: GOTO_SCREEN(FeedratePercentScreen); break;
+ case 4: GOTO_SCREEN(TemperatureScreen); break;
+ case 5: GOTO_SCREEN(NudgeNozzleScreen); break;
+ case 6: GOTO_SCREEN(BioConfirmHomeXYZ); break;
+ case 7: StatusScreen::unlockMotors(); break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/boot_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/boot_screen.cpp
new file mode 100644
index 0000000000..b2f65848d1
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/boot_screen.cpp
@@ -0,0 +1,113 @@
+/*******************
+ * boot_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+#include "../ftdi_eve_lib/extras/poly_ui.h"
+#include "../archim2-flash/flash_storage.h"
+
+#ifdef TOUCH_UI_PORTRAIT
+ #include "../theme/bootscreen_logo_portrait.h"
+#else
+ #include "../theme/bootscreen_logo_landscape.h"
+#endif
+
+using namespace FTDI;
+
+void BootScreen::onRedraw(draw_mode_t) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(0x000000));
+ cmd.cmd(CLEAR(true,true,true));
+
+ CLCD::turn_on_backlight();
+ SoundPlayer::set_volume(255);
+}
+
+void BootScreen::onIdle() {
+ if (CLCD::is_touching()) {
+ // If the user is touching the screen at startup, then
+ // assume the user wants to re-calibrate the screen.
+ // This gives the user the ability to recover a
+ // miscalibration that has been stored to EEPROM.
+
+ // Also reset display parameters to defaults, just
+ // in case the display is borked.
+ InterfaceSettingsScreen::failSafeSettings();
+
+ GOTO_SCREEN(TouchCalibrationScreen);
+ current_screen.forget();
+ PUSH_SCREEN(StatusScreen);
+ } else {
+ if (!UIFlashStorage::is_valid()) {
+ SpinnerDialogBox::show(F("Please wait..."));
+ UIFlashStorage::format_flash();
+ SpinnerDialogBox::hide();
+ }
+
+ if (UIData::animations_enabled()) {
+ // If there is a startup video in the flash SPI, play
+ // that, otherwise show a static splash screen.
+ if (!MediaPlayerScreen::playBootMedia())
+ showSplashScreen();
+ }
+ #ifdef LULZBOT_USE_BIOPRINTER_UI
+ GOTO_SCREEN(BioConfirmHomeXYZ);
+ current_screen.forget();
+ PUSH_SCREEN(StatusScreen);
+ PUSH_SCREEN(BioConfirmHomeE);
+ #else
+ GOTO_SCREEN(StatusScreen);
+ #endif
+ }
+}
+
+void BootScreen::showSplashScreen() {
+ CommandProcessor cmd;
+ cmd.cmd(CMD_DLSTART);
+ cmd.cmd(CLEAR_COLOR_RGB(0xDEEA5C));
+ cmd.cmd(CLEAR(true,true,true));
+
+ #define POLY(A) PolyUI::poly_reader_t(A, sizeof(A)/sizeof(A[0]))
+
+ PolyUI ui(cmd);
+
+ cmd.cmd(COLOR_RGB(0xC1D82F));
+ ui.fill(POLY(logo_green));
+ cmd.cmd(COLOR_RGB(0x000000));
+ ui.fill(POLY(logo_black));
+ ui.fill(POLY(logo_type));
+ ui.fill(POLY(logo_mark));
+ cmd.cmd(COLOR_RGB(0xFFFFFF));
+ ui.fill(POLY(logo_white));
+
+ cmd.cmd(DL::DL_DISPLAY);
+ cmd.cmd(CMD_SWAP);
+ cmd.execute();
+
+ ExtUI::delay_ms(2500);
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp
new file mode 100644
index 0000000000..8945aeb43d
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/change_filament_screen.cpp
@@ -0,0 +1,323 @@
+/******************************
+ * change_filament_screen.cpp *
+ ******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace ExtUI;
+using namespace FTDI;
+using namespace Theme;
+
+#define COOL_TEMP 40
+#define LOW_TEMP 180
+#define MED_TEMP 200
+#define HIGH_TEMP 220
+
+/****************** COLOR SCALE ***********************/
+
+uint32_t getWarmColor(uint16_t temp, uint16_t cool, uint16_t low, uint16_t med, uint16_t high) {
+ rgb_t R0, R1, mix;
+
+ float t;
+ if (temp < cool) {
+ R0 = cool_rgb;
+ R1 = low_rgb;
+ t = 0;
+ }
+ else if (temp < low) {
+ R0 = cool_rgb;
+ R1 = low_rgb;
+ t = (float(temp)-cool)/(low-cool);
+ }
+ else if (temp < med) {
+ R0 = low_rgb;
+ R1 = med_rgb;
+ t = (float(temp)-low)/(med-low);
+ }
+ else if (temp < high) {
+ R0 = med_rgb;
+ R1 = high_rgb;
+ t = (float(temp)-med)/(high-med);
+ }
+ else if (temp >= high) {
+ R0 = med_rgb;
+ R1 = high_rgb;
+ t = 1;
+ }
+ rgb_t::lerp(t, R0, R1, mix);
+ return mix;
+}
+
+void ChangeFilamentScreen::drawTempGradient(uint16_t x, uint16_t y, uint16_t w, uint16_t h) {
+ CommandProcessor cmd;
+ cmd.cmd(SCISSOR_XY (x, y))
+ .cmd(SCISSOR_SIZE (w, h/2))
+ .gradient (x, y, high_rgb, x, y+h/2, med_rgb)
+ .cmd(SCISSOR_XY (x, y+h/2))
+ .cmd(SCISSOR_SIZE (w, h/2))
+ .gradient (x, y+h/2, med_rgb, x, y+h, low_rgb)
+ .cmd(SCISSOR_XY ())
+ .cmd(SCISSOR_SIZE ());
+}
+
+void ChangeFilamentScreen::onEntry() {
+ screen_data.ChangeFilamentScreen.e_tag = ExtUI::getActiveTool() + 10;
+ screen_data.ChangeFilamentScreen.t_tag = 0;
+ screen_data.ChangeFilamentScreen.repeat_tag = 0;
+ screen_data.ChangeFilamentScreen.saved_extruder = getActiveTool();
+}
+
+void ChangeFilamentScreen::onExit() {
+ setActiveTool(screen_data.ChangeFilamentScreen.saved_extruder, true);
+}
+
+void ChangeFilamentScreen::onRedraw(draw_mode_t what) {
+ CommandProcessor cmd;
+
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_COLS 2
+ #define GRID_ROWS 11
+ #else
+ #define GRID_COLS 4
+ #define GRID_ROWS 6
+ #endif
+
+ if (what & BACKGROUND) {
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .tag(0)
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_large)
+ #else
+ .font(font_medium)
+ #endif
+ .text(BTN_POS(1,1), BTN_SIZE(2,1), F("Extruder Selection:"))
+ #ifdef TOUCH_UI_PORTRAIT
+ .text(BTN_POS(1,7), BTN_SIZE(1,1), F("Current Temp:"))
+ #else
+ .text(BTN_POS(3,1), BTN_SIZE(2,1), F("Current Temp:"))
+ .font(font_small)
+ #endif
+ .text(BTN_POS(1,3), BTN_SIZE(2,1), F("Removal Temp:"));
+ drawTempGradient(BTN_POS(1,4), BTN_SIZE(1,3));
+ }
+
+ if (what & FOREGROUND) {
+ char e_str[15];
+
+ const char *idle = PSTR("%-3d C / idle");
+ const char *not_idle = PSTR("%-3d / %-3d C");
+
+ sprintf_P(
+ e_str,
+ isHeaterIdle(getExtruder()) ? idle : not_idle,
+ ROUND(getActualTemp_celsius(getExtruder())),
+ ROUND(getTargetTemp_celsius(getExtruder()))
+ );
+
+ const rgb_t tcol = getWarmColor(getActualTemp_celsius(getExtruder()), COOL_TEMP, LOW_TEMP, MED_TEMP, HIGH_TEMP);
+ cmd.cmd(COLOR_RGB(tcol))
+ .tag(15)
+ #ifdef TOUCH_UI_PORTRAIT
+ .rectangle(BTN_POS(2,7), BTN_SIZE(1,1))
+ #else
+ .rectangle(BTN_POS(3,2), BTN_SIZE(2,1))
+ #endif
+ .cmd(COLOR_RGB(tcol.luminance() > 128 ? 0x000000 : 0xFFFFFF))
+ .font(font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ .text(BTN_POS(2,7), BTN_SIZE(1,1), e_str)
+ #else
+ .text(BTN_POS(3,2), BTN_SIZE(2,1), e_str)
+ #endif
+ .colors(normal_btn);
+
+ const bool t_ok = getActualTemp_celsius(getExtruder()) > getSoftenTemp() - 10;
+
+ if (screen_data.ChangeFilamentScreen.t_tag && !t_ok) {
+ cmd.text(BTN_POS(1,6), BTN_SIZE(1,1), F("Heating..."));
+ } else if (getActualTemp_celsius(getExtruder()) > 100) {
+ cmd.cmd(COLOR_RGB(0xFF0000))
+ .text(BTN_POS(1,4), BTN_SIZE(1,1), F("Caution:"))
+ .colors(normal_btn)
+ .text(BTN_POS(1,6), BTN_SIZE(1,1), F("Hot!"));
+ }
+
+ #define TOG_STYLE(A) colors(A ? action_btn : normal_btn)
+
+ const bool tog2 = screen_data.ChangeFilamentScreen.t_tag == 2;
+ const bool tog3 = screen_data.ChangeFilamentScreen.t_tag == 3;
+ const bool tog4 = screen_data.ChangeFilamentScreen.t_tag == 4;
+ const bool tog10 = screen_data.ChangeFilamentScreen.e_tag == 10;
+ #if HOTENDS > 1
+ const bool tog11 = screen_data.ChangeFilamentScreen.e_tag == 11;
+ #endif
+
+ #ifdef TOUCH_UI_PORTRAIT
+ cmd.font(font_large)
+ #else
+ cmd.font(font_medium)
+ #endif
+ .TOG_STYLE(tog10)
+ .tag(10) .button (BTN_POS(1,2), BTN_SIZE(1,1), F("1"))
+ #if HOTENDS < 2
+ .enabled(false)
+ #else
+ .TOG_STYLE(tog11)
+ #endif
+ .tag(11) .button (BTN_POS(2,2), BTN_SIZE(1,1), F("2"));
+
+ if (!t_ok) reset_menu_timeout();
+
+ const bool tog7 = screen_data.ChangeFilamentScreen.repeat_tag == 7;
+ const bool tog8 = screen_data.ChangeFilamentScreen.repeat_tag == 8;
+
+ #ifdef TOUCH_UI_PORTRAIT
+ cmd.font(font_large)
+ #else
+ cmd.font(font_small)
+ #endif
+ .tag(2) .TOG_STYLE(tog2) .button (BTN_POS(2,6), BTN_SIZE(1,1), F( STRINGIFY(LOW_TEMP) "C (PLA)"))
+ .tag(3) .TOG_STYLE(tog3) .button (BTN_POS(2,5), BTN_SIZE(1,1), F( STRINGIFY(MED_TEMP) "C (ABS)"))
+ .tag(4) .TOG_STYLE(tog4) .button (BTN_POS(2,4), BTN_SIZE(1,1), F( STRINGIFY(HIGH_TEMP) "C (High)"))
+ .colors(normal_btn)
+
+ // Add tags to color gradient
+ .cmd(COLOR_MASK(0,0,0,0))
+ .tag(2) .rectangle(BTN_POS(1,6), BTN_SIZE(1,1))
+ .tag(3) .rectangle(BTN_POS(1,5), BTN_SIZE(1,1))
+ .tag(4) .rectangle(BTN_POS(1,4), BTN_SIZE(1,1))
+ .cmd(COLOR_MASK(1,1,1,1))
+
+ .cmd(COLOR_RGB(t_ok ? bg_text_enabled : bg_text_disabled))
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_large)
+ .tag(0) .text (BTN_POS(1,8), BTN_SIZE(1,1), F("Unload"))
+ .text (BTN_POS(2,8), BTN_SIZE(1,1), F("Load/Extrude"))
+ .tag(5) .enabled(t_ok).button (BTN_POS(1,9), BTN_SIZE(1,1), F("Momentary"))
+ .tag(6) .enabled(t_ok).button (BTN_POS(2,9), BTN_SIZE(1,1), F("Momentary"))
+ .tag(7).TOG_STYLE(tog7).enabled(t_ok).button (BTN_POS(1,10), BTN_SIZE(1,1), F("Continuous"))
+ .tag(8).TOG_STYLE(tog8).enabled(t_ok).button (BTN_POS(2,10), BTN_SIZE(1,1), F("Continuous"))
+ .tag(1).colors(action_btn) .button (BTN_POS(1,11), BTN_SIZE(2,1), F("Back"));
+ #else
+ .font(font_small)
+ .tag(0) .text (BTN_POS(3,3), BTN_SIZE(1,1), F("Unload"))
+ .text (BTN_POS(4,3), BTN_SIZE(1,1), F("Load/Extrude"))
+ .tag(5) .enabled(t_ok).button (BTN_POS(3,4), BTN_SIZE(1,1), F("Momentary"))
+ .tag(6) .enabled(t_ok).button (BTN_POS(4,4), BTN_SIZE(1,1), F("Momentary"))
+ .tag(7).TOG_STYLE(tog7).enabled(t_ok).button (BTN_POS(3,5), BTN_SIZE(1,1), F("Continuous"))
+ .tag(8).TOG_STYLE(tog8).enabled(t_ok).button (BTN_POS(4,5), BTN_SIZE(1,1), F("Continuous"))
+ .font(font_medium)
+ .tag(1).colors(action_btn) .button (BTN_POS(3,6), BTN_SIZE(2,1), F("Back"));
+ #endif
+ }
+ #undef GRID_COLS
+ #undef GRID_ROWS
+}
+
+uint8_t ChangeFilamentScreen::getSoftenTemp() {
+ switch (screen_data.ChangeFilamentScreen.t_tag) {
+ case 2: return LOW_TEMP;
+ case 3: return MED_TEMP;
+ case 4: return HIGH_TEMP;
+ default: return EXTRUDE_MINTEMP;
+ }
+}
+
+ExtUI::extruder_t ChangeFilamentScreen::getExtruder() {
+ switch (screen_data.ChangeFilamentScreen.e_tag) {
+ case 13: return ExtUI::E3;
+ case 12: return ExtUI::E2;
+ case 11: return ExtUI::E1;
+ default: return ExtUI::E0;
+ }
+}
+
+bool ChangeFilamentScreen::onTouchStart(uint8_t tag) {
+ // Make the Momentary and Continuous buttons slightly more responsive
+ switch (tag) {
+ case 5: case 6: case 7: case 8:
+ return ChangeFilamentScreen::onTouchHeld(tag);
+ default:
+ return false;
+ }
+}
+
+bool ChangeFilamentScreen::onTouchEnd(uint8_t tag) {
+ using namespace ExtUI;
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ case 2:
+ case 3:
+ case 4:
+ // Change temperature
+ screen_data.ChangeFilamentScreen.t_tag = tag;
+ setTargetTemp_celsius(getSoftenTemp(), getExtruder());
+ break;
+ case 7:
+ screen_data.ChangeFilamentScreen.repeat_tag = (screen_data.ChangeFilamentScreen.repeat_tag == 7) ? 0 : 7;
+ break;
+ case 8:
+ screen_data.ChangeFilamentScreen.repeat_tag = (screen_data.ChangeFilamentScreen.repeat_tag == 8) ? 0 : 8;
+ break;
+ case 10:
+ case 11:
+ // Change extruder
+ screen_data.ChangeFilamentScreen.e_tag = tag;
+ screen_data.ChangeFilamentScreen.t_tag = 0;
+ screen_data.ChangeFilamentScreen.repeat_tag = 0;
+ setActiveTool(getExtruder(), true);
+ break;
+ case 15: GOTO_SCREEN(TemperatureScreen); break;
+ }
+ return true;
+}
+
+bool ChangeFilamentScreen::onTouchHeld(uint8_t tag) {
+ if (ExtUI::isMoving()) return false; // Don't allow moves to accumulate
+ constexpr float increment = 1;
+ #define UI_INCREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_INCREMENT(AxisPosition_mm, axis);
+ #define UI_DECREMENT_AXIS(axis) MoveAxisScreen::setManualFeedrate(axis, increment); UI_DECREMENT(AxisPosition_mm, axis);
+ switch (tag) {
+ case 5: case 7: UI_DECREMENT_AXIS(getExtruder()); break;
+ case 6: case 8: UI_INCREMENT_AXIS(getExtruder()); break;
+ default: return false;
+ }
+ #undef UI_DECREMENT_AXIS
+ #undef UI_INCREMENT_AXIS
+ return false;
+}
+
+void ChangeFilamentScreen::onIdle() {
+ if (screen_data.ChangeFilamentScreen.repeat_tag) onTouchHeld(screen_data.ChangeFilamentScreen.repeat_tag);
+ if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) {
+ onRefresh();
+ refresh_timer.start();
+ }
+ BaseScreen::onIdle();
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_abort_print_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_abort_print_dialog_box.cpp
new file mode 100644
index 0000000000..77d4fcfaca
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_abort_print_dialog_box.cpp
@@ -0,0 +1,47 @@
+/**************************************
+ * confirm_abort_print_dialog_box.cpp *
+ **************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace ExtUI;
+
+void ConfirmAbortPrintDialogBox::onRedraw(draw_mode_t) {
+ drawMessage(F("Are you sure you want to cancel the print?"));
+ drawYesNoButtons();
+}
+
+bool ConfirmAbortPrintDialogBox::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ GOTO_PREVIOUS();
+ stopPrint();
+ return true;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp
new file mode 100644
index 0000000000..f367918f50
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_auto_calibration_dialog_box.cpp
@@ -0,0 +1,48 @@
+/*******************************************
+ * confirm_auto_calibration_dialog_box.cpp *
+ *******************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(CALIBRATION_GCODE)
+
+#include "screens.h"
+
+using namespace ExtUI;
+using namespace Theme;
+
+void ConfirmAutoCalibrationDialogBox::onRedraw(draw_mode_t) {
+ drawMessage(F("For best results, unload the filament and clean the hotend prior to starting calibration. Continue?"));
+ drawYesNoButtons();
+}
+
+bool ConfirmAutoCalibrationDialogBox::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ GOTO_SCREEN(StatusScreen);
+ injectCommands_P(PSTR(LULZBOT_CALIBRATION_COMMANDS));
+ return true;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp
new file mode 100644
index 0000000000..2da592fe3f
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_erase_flash_dialog_box.cpp
@@ -0,0 +1,54 @@
+/**************************************
+ * confirm_erase_flash_dialog_box.cpp *
+ **************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+
+#include "screens.h"
+
+#include "../archim2-flash/flash_storage.h"
+
+using namespace FTDI;
+
+void ConfirmEraseFlashDialogBox::onRedraw(draw_mode_t) {
+ drawMessage(F("Are you sure? SPI flash will be erased."));
+ drawYesNoButtons();
+}
+
+bool ConfirmEraseFlashDialogBox::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ SpinnerDialogBox::show(F("Erasing..."));
+ UIFlashStorage::format_flash();
+ SpinnerDialogBox::hide();
+ AlertDialogBox::show(F("SPI flash erased"));
+ // Remove ConfirmEraseFlashDialogBox from the stack
+ // so the alert box doesn't return to me.
+ current_screen.forget();
+ return true;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_user_request_alert_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_user_request_alert_box.cpp
new file mode 100644
index 0000000000..82f92de21c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/confirm_user_request_alert_box.cpp
@@ -0,0 +1,58 @@
+/**************************************
+ * confirm_user_request_alert_box.cpp *
+ **************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+
+void ConfirmUserRequestAlertBox::onRedraw(draw_mode_t mode) {
+ AlertDialogBox::onRedraw(mode); // Required for the GOTO_SCREEN function to work
+}
+
+bool ConfirmUserRequestAlertBox::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ ExtUI::setUserConfirmed();
+ GOTO_PREVIOUS();
+ return true;
+ case 2: GOTO_PREVIOUS(); return true;
+ default: return false;
+ }
+}
+
+void ConfirmUserRequestAlertBox::show(const char* msg) {
+ drawMessage(msg);
+ storeBackground();
+ screen_data.AlertDialogBox.isError = false;
+ GOTO_SCREEN(ConfirmUserRequestAlertBox);
+}
+
+void ConfirmUserRequestAlertBox::hide() {
+ if (AT_SCREEN(ConfirmUserRequestAlertBox))
+ GOTO_PREVIOUS();
+}
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/default_acceleration_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/default_acceleration_screen.cpp
new file mode 100644
index 0000000000..1e1cb8457a
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/default_acceleration_screen.cpp
@@ -0,0 +1,63 @@
+/***********************************
+ * default_acceleration_screen.cpp *
+ ***********************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void DefaultAccelerationScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0);
+ w.units(PSTR("mm/s^2"));
+ w.heading( PSTR("Default Acceleration"));
+ w.color(other);
+ w.adjuster( 2, PSTR("Printing:"), getPrintingAcceleration_mm_s2() );
+ w.adjuster( 4, PSTR("Travel:"), getTravelAcceleration_mm_s2() );
+ w.adjuster( 6, PSTR("Retraction:"), getRetractAcceleration_mm_s2() );
+ w.increments();
+ w.button( 8, PSTR("Set Axis Maximum"));
+}
+
+bool DefaultAccelerationScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(PrintingAcceleration_mm_s2); break;
+ case 3: UI_INCREMENT(PrintingAcceleration_mm_s2); break;
+ case 4: UI_DECREMENT(TravelAcceleration_mm_s2); break;
+ case 5: UI_INCREMENT(TravelAcceleration_mm_s2); break;
+ case 6: UI_DECREMENT(RetractAcceleration_mm_s2); break;
+ case 7: UI_INCREMENT(RetractAcceleration_mm_s2); break;
+ case 8: GOTO_SCREEN(MaxAccelerationScreen); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp
new file mode 100644
index 0000000000..9bec9bf55f
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/developer_menu.cpp
@@ -0,0 +1,150 @@
+/**********************
+ * developer_menu.cpp *
+ **********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+
+#include "screens.h"
+
+#include "../archim2-flash/flash_storage.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void DeveloperMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .font(font_medium)
+ .tag(0);
+
+ #ifdef SPI_FLASH_SS
+ constexpr bool has_flash = true;
+ #else
+ constexpr bool has_flash = false;
+ #endif
+
+ #if ENABLED(SDSUPPORT)
+ constexpr bool has_media = true;
+ #else
+ constexpr bool has_media = false;
+ #endif
+
+ cmd.cmd(COLOR_RGB(bg_text_enabled));
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 10
+ #define GRID_COLS 1
+ cmd.font(font_large) .text ( BTN_POS(1,1), BTN_SIZE(1,1), F("Developer Menu"))
+ .colors(normal_btn)
+ .tag(2).font(font_medium) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Show All Widgets"))
+ .tag(3) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Stress Test"))
+ .tag(4) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("Show Touch Registers"))
+ .tag(5) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("Play Song"))
+ .tag(6).enabled(has_media).button( BTN_POS(1,6), BTN_SIZE(1,1), F("Play Video from Media"))
+ .tag(7).enabled(has_flash).button( BTN_POS(1,7), BTN_SIZE(1,1), F("Play Video from SPI Flash"))
+ .tag(8).enabled(has_flash).button( BTN_POS(1,8), BTN_SIZE(1,1), F("Load Video to SPI Flash"))
+ .tag(9).enabled(has_flash).button( BTN_POS(1,9), BTN_SIZE(1,1), F("Erase SPI Flash"))
+
+ .tag(1).colors(action_btn)
+ .button( BTN_POS(1,10), BTN_SIZE(1,1), F("Back"));
+ #else
+ #define GRID_ROWS 6
+ #define GRID_COLS 2
+ cmd.font(font_medium) .text ( BTN_POS(1,1), BTN_SIZE(2,1), F("Developer Menu"))
+ .colors(normal_btn)
+ .tag(2).font(font_small) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("Show All Widgets"))
+ .tag(3) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("Show Touch Registers"))
+ .tag(9) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("Show Pin States"))
+ .tag(4) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("Play Song"))
+ .tag(5).enabled(has_media).button( BTN_POS(2,2), BTN_SIZE(1,1), F("Play Video from Media"))
+ .tag(6).enabled(has_flash).button( BTN_POS(2,3), BTN_SIZE(1,1), F("Play Video from SPI Flash"))
+ .tag(7).enabled(has_flash).button( BTN_POS(2,4), BTN_SIZE(1,1), F("Load Video to SPI Flash"))
+ .tag(8).enabled(has_flash).button( BTN_POS(2,5), BTN_SIZE(1,1), F("Erase SPI Flash"))
+ .tag(1).colors(action_btn)
+ .button( BTN_POS(1,6), BTN_SIZE(2,1), F("Back"));
+ #endif
+ }
+}
+
+bool DeveloperMenu::onTouchEnd(uint8_t tag) {
+ using namespace Theme;
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ case 2: GOTO_SCREEN(WidgetsScreen); break;
+ case 3:
+ PUSH_SCREEN(StressTestScreen);
+ AlertDialogBox::show(F("Please do not run this test unattended as it may cause your printer to malfunction."));
+ current_screen.forget();
+ break;
+ case 4: GOTO_SCREEN(TouchRegistersScreen); break;
+ case 5: sound.play(js_bach_joy, PLAY_ASYNCHRONOUS); break;
+ #if ENABLED(SDSUPPORT)
+ case 6:
+ if (!MediaPlayerScreen::playCardMedia())
+ AlertDialogBox::showError(F("Cannot open STARTUP.AVI"));
+ break;
+ #endif
+ #ifdef SPI_FLASH_SS
+ case 7:
+ if (!MediaPlayerScreen::playBootMedia())
+ AlertDialogBox::showError(F("No boot media available"));
+ break;
+ case 8:
+ {
+ SpinnerDialogBox::show(F("Saving..."));
+ UIFlashStorage::error_t res = UIFlashStorage::write_media_file(F("STARTUP.AVI"));
+ SpinnerDialogBox::hide();
+ reset_menu_timeout();
+ switch (res) {
+ case UIFlashStorage::SUCCESS:
+ AlertDialogBox::show(F("File copied!"));
+ break;
+
+ case UIFlashStorage::READ_ERROR:
+ AlertDialogBox::showError(F("Failed to read file"));
+ break;
+
+ case UIFlashStorage::VERIFY_ERROR:
+ AlertDialogBox::showError(F("Failed to verify file"));
+ break;
+
+ case UIFlashStorage::FILE_NOT_FOUND:
+ AlertDialogBox::showError(F("Cannot open STARTUP.AVI"));
+ break;
+
+ case UIFlashStorage::WOULD_OVERWRITE:
+ AlertDialogBox::showError(F("Cannot overwrite existing media."));
+ break;
+ }
+ break;
+ }
+ case 9: GOTO_SCREEN(ConfirmEraseFlashDialogBox); break;
+ #endif
+ case 10: GOTO_SCREEN(EndstopStatesScreen); break;
+ default: return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/dialog_box_base_class.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/dialog_box_base_class.cpp
new file mode 100644
index 0000000000..6178a71e94
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/dialog_box_base_class.cpp
@@ -0,0 +1,83 @@
+/*****************************
+ * dialog_box_base_class.cpp *
+ *****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+#define GRID_COLS 2
+#define GRID_ROWS 8
+
+template
+void DialogBoxBaseClass::drawMessage(const T message, int16_t font) {
+ CommandProcessor cmd;
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .tag(0);
+ draw_text_box(cmd, BTN_POS(1,1), BTN_SIZE(2,3), message, OPT_CENTER, font ? font : font_large);
+ cmd.colors(normal_btn);
+}
+
+template void DialogBoxBaseClass::drawMessage(const char *, int16_t font);
+template void DialogBoxBaseClass::drawMessage(const progmem_str, int16_t font);
+
+void DialogBoxBaseClass::drawYesNoButtons(uint8_t default_btn) {
+ CommandProcessor cmd;
+ cmd.font(font_medium)
+ .colors(default_btn == 1 ? action_btn : normal_btn).tag(1).button( BTN_POS(1,8), BTN_SIZE(1,1), F("Yes"))
+ .colors(default_btn == 2 ? action_btn : normal_btn).tag(2).button( BTN_POS(2,8), BTN_SIZE(1,1), F("No"));
+}
+
+void DialogBoxBaseClass::drawOkayButton() {
+ CommandProcessor cmd;
+ cmd.font(font_medium)
+ .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Okay"));
+}
+
+void DialogBoxBaseClass::drawButton(const progmem_str label) {
+ CommandProcessor cmd;
+ cmd.font(font_medium)
+ .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), label);
+}
+
+void DialogBoxBaseClass::drawSpinner() {
+ CommandProcessor cmd;
+ cmd.cmd(COLOR_RGB(bg_text_enabled))
+ .spinner(BTN_POS(1,4), BTN_SIZE(2,3)).execute();
+}
+
+bool DialogBoxBaseClass::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); return true;
+ case 2: GOTO_PREVIOUS(); return true;
+ default: return false;
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/display_tuning_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/display_tuning_screen.cpp
new file mode 100644
index 0000000000..7af436a5c7
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/display_tuning_screen.cpp
@@ -0,0 +1,61 @@
+/*****************************
+ * display_tuning_screen.cpp *
+ *****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void DisplayTuningScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0, BaseNumericAdjustmentScreen::DEFAULT_LOWEST);
+ w.units(PSTR(""));
+ w.heading( PSTR("Display Tuning"));
+ w.color(other);
+ w.adjuster( 2, PSTR("H Offset:"), CLCD::mem_read_16(CLCD::REG::HOFFSET) );
+ w.adjuster( 4, PSTR("V Offset:"), CLCD::mem_read_16(CLCD::REG::VOFFSET) );
+ w.increments();
+ w.heading( PSTR("Touch Screen"));
+ w.button(6, PSTR("Calibrate"));
+}
+
+bool DisplayTuningScreen::onTouchHeld(uint8_t tag) {
+ #define REG_INCREMENT(a,i) CLCD::mem_write_16(CLCD::REG::a, CLCD::mem_read_16(CLCD::REG::a) + i)
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: REG_INCREMENT(HOFFSET, -increment); break;
+ case 3: REG_INCREMENT(HOFFSET, increment); break;
+ case 4: REG_INCREMENT(VOFFSET, -increment); break;
+ case 5: REG_INCREMENT(VOFFSET, increment); break;
+ case 6: GOTO_SCREEN(TouchCalibrationScreen); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/endstop_state_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/endstop_state_screen.cpp
new file mode 100644
index 0000000000..389ce3e3f1
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/endstop_state_screen.cpp
@@ -0,0 +1,155 @@
+/****************************
+ * endstop_state_screen.cpp *
+ ****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+void EndstopStatesScreen::onEntry() {
+ BaseScreen::onEntry();
+ #ifdef LULZBOT_SET_PROBE_PINS_STATE
+ LULZBOT_SET_PROBE_PINS_STATE(true)
+ #endif
+}
+
+void EndstopStatesScreen::onExit() {
+ BaseScreen::onExit();
+ #ifdef LULZBOT_SET_PROBE_PINS_STATE
+ LULZBOT_SET_PROBE_PINS_STATE(false)
+ #endif
+}
+
+void EndstopStatesScreen::onRedraw(draw_mode_t) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .cmd(CLEAR(true,true,true))
+ .tag(0);
+
+ #define GRID_ROWS 7
+ #define GRID_COLS 6
+
+ #define PIN_BTN(X,Y,PIN,LABEL) button(BTN_POS(X,Y), BTN_SIZE(2,1), F(LABEL))
+ #define PIN_ENABLED(LABEL,PIN,INV,X,Y) cmd.enabled(1).colors(READ(PIN##_PIN) != INV ? action_btn : normal_btn).PIN_BTN(X,Y,PIN,LABEL);
+ #define PIN_DISABLED(LABEL,PIN,INV,X,Y) cmd.enabled(0).PIN_BTN(X,Y,PIN,LABEL);
+
+ #ifdef TOUCH_UI_PORTRAIT
+ cmd.font(font_large)
+ #else
+ cmd.font(font_medium)
+ #endif
+ .text(BTN_POS(1,1), BTN_SIZE(6,1), F("Endstop States:"))
+ .font(font_tiny);
+ #if PIN_EXISTS(X_MAX)
+ PIN_ENABLED ("X Max", X_MAX,X_MAX_ENDSTOP_INVERTING,1,2)
+ #else
+ PIN_DISABLED("X Max",X_MAX,X_MAX_ENDSTOP_INVERTING,1,2)
+ #endif
+ #if PIN_EXISTS(Y_MAX)
+ PIN_ENABLED ("Y Max",Y_MAX,Y_MAX_ENDSTOP_INVERTING,3,2)
+ #else
+ PIN_DISABLED("Y Max",Y_MAX,Y_MAX_ENDSTOP_INVERTING,3,2)
+ #endif
+ #if PIN_EXISTS(Z_MAX)
+ PIN_ENABLED ("Z Max",Z_MAX,Z_MAX_ENDSTOP_INVERTING,5,2)
+ #else
+ PIN_DISABLED("Z Max",Z_MAX,Z_MAX_ENDSTOP_INVERTING,5,2)
+ #endif
+ #if PIN_EXISTS(X_MIN)
+ PIN_ENABLED ("X Min",X_MIN,X_MIN_ENDSTOP_INVERTING,1,3)
+ #else
+ PIN_DISABLED("X Min",X_MIN,X_MIN_ENDSTOP_INVERTING,1,3)
+ #endif
+ #if PIN_EXISTS(Y_MIN)
+ PIN_ENABLED ("Y Min",Y_MIN,Y_MIN_ENDSTOP_INVERTING,3,3)
+ #else
+ PIN_DISABLED("Y Min",Y_MIN,Y_MIN_ENDSTOP_INVERTING,3,3)
+ #endif
+ #if PIN_EXISTS(Z_MIN)
+ PIN_ENABLED ("Z Min",Z_MIN,Z_MIN_ENDSTOP_INVERTING,5,3)
+ #else
+ PIN_DISABLED("Z Min",Z_MIN,Z_MIN_ENDSTOP_INVERTING,5,3)
+ #endif
+ #if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT)
+ PIN_ENABLED ("Runout 1",FIL_RUNOUT, FIL_RUNOUT_INVERTING,1,4)
+ #else
+ PIN_DISABLED("Runout 1",FIL_RUNOUT, FIL_RUNOUT_INVERTING,1,4)
+ #endif
+ #if ENABLED(FILAMENT_RUNOUT_SENSOR) && PIN_EXISTS(FIL_RUNOUT2)
+ PIN_ENABLED ("Runout 2",FIL_RUNOUT2,FIL_RUNOUT_INVERTING,3,4)
+ #else
+ PIN_DISABLED("Runout 2",FIL_RUNOUT2,FIL_RUNOUT_INVERTING,3,4)
+ #endif
+ #if PIN_EXISTS(Z_MIN_PROBE)
+ PIN_ENABLED ("Z Probe",Z_MIN_PROBE,Z_MIN_PROBE_ENDSTOP_INVERTING,5,4)
+ #else
+ PIN_DISABLED("Z Probe",Z_MIN_PROBE,Z_MIN_PROBE_ENDSTOP_INVERTING,5,4)
+ #endif
+
+ #if HAS_SOFTWARE_ENDSTOPS
+ #undef EDGE_R
+ #define EDGE_R 30
+ cmd.font(font_small)
+ .text (BTN_POS(1,5), BTN_SIZE(3,1), F("Soft Limits:"), OPT_RIGHTX | OPT_CENTERY)
+ .colors(ui_toggle)
+ .tag(2).toggle(BTN_POS(4,5), BTN_SIZE(3,1), F("off\xFFon"), getSoftEndstopState());
+ #undef EDGE_R
+ #define EDGE_R 0
+ #endif
+
+ cmd.font(font_medium)
+ .colors(action_btn)
+ .tag(1).button( BTN_POS(1,7), BTN_SIZE(6,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+}
+
+bool EndstopStatesScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ #if HAS_SOFTWARE_ENDSTOPS
+ case 2: setSoftEndstopState(!getSoftEndstopState());
+ #endif
+ default:
+ return false;
+ }
+ return true;
+}
+
+void EndstopStatesScreen::onIdle() {
+ constexpr uint32_t DIAGNOSTICS_UPDATE_INTERVAL = 100;
+
+ if (refresh_timer.elapsed(DIAGNOSTICS_UPDATE_INTERVAL)) {
+ onRefresh();
+ refresh_timer.start();
+ reset_menu_timeout();
+ }
+ BaseScreen::onIdle();
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/feedrate_percent_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/feedrate_percent_screen.cpp
new file mode 100644
index 0000000000..e9f527ef96
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/feedrate_percent_screen.cpp
@@ -0,0 +1,52 @@
+/*******************************
+ * feedrate_percent_screen.cpp *
+ *******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+
+void FeedratePercentScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0).units(PSTR("%"));
+
+ w.heading(PSTR("Print Speed"));
+ w.adjuster(4, PSTR("Speed"), getFeedrate_percent());
+ w.increments();
+}
+
+bool FeedratePercentScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 4: UI_DECREMENT(Feedrate_percent); break;
+ case 5: UI_INCREMENT(Feedrate_percent); break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_menu.cpp
new file mode 100644
index 0000000000..55280859af
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_menu.cpp
@@ -0,0 +1,101 @@
+/*********************
+ * filament_menu.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ANY(LIN_ADVANCE, FILAMENT_RUNOUT_SENSOR)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void FilamentMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true));
+ }
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.font(font_large)
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 9
+ #define GRID_COLS 2
+ .text ( BTN_POS(1,1), BTN_SIZE(2,1), F("Filament Options:"))
+ .font(font_medium).colors(normal_btn)
+ #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(2).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Runout Sensor"))
+ #if ENABLED(LIN_ADVANCE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(3).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Linear Advance"))
+ .colors(action_btn)
+ .tag(1) .button( BTN_POS(1,9), BTN_SIZE(2,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ #else
+ #define GRID_ROWS 6
+ #define GRID_COLS 3
+ .text ( BTN_POS(1,1), BTN_SIZE(3,1), F("Filament Options:"))
+ .font(font_medium).colors(normal_btn)
+ #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(2).button( BTN_POS(1,2), BTN_SIZE(3,1), F("Filament Runout"))
+ #if ENABLED(LIN_ADVANCE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(3).button( BTN_POS(1,3), BTN_SIZE(3,1), F("Linear Advance"))
+ .colors(action_btn)
+ .tag(1) .button( BTN_POS(1,6), BTN_SIZE(3,1), F("Back"));
+ #endif
+ }
+}
+
+bool FilamentMenu::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ case 2: GOTO_SCREEN(FilamentRunoutScreen); break;
+ #endif
+ #if ENABLED(LIN_ADVANCE)
+ case 3: GOTO_SCREEN(LinearAdvanceScreen); break;
+ #endif
+ default: return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp
new file mode 100644
index 0000000000..570f83835f
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/filament_runout_screen.cpp
@@ -0,0 +1,65 @@
+/******************************
+ * filament_runout_screen.cpp *
+ ******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(FILAMENT_RUNOUT_SENSOR)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void FilamentRunoutScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.heading( PSTR("Runout Detection:"));
+ w.toggle( 2, PSTR("Filament Sensor:"), PSTR("off\xFFon"), getFilamentRunoutEnabled());
+
+ #ifdef FILAMENT_RUNOUT_DISTANCE_MM
+ w.heading(PSTR("Detection Threshold:"));
+ w.units(PSTR("mm"));
+ w.precision(0);
+ w.color(e_axis);
+ w.adjuster( 10, PSTR("Distance:"), getFilamentRunoutDistance_mm(), getFilamentRunoutEnabled());
+ w.increments();
+ #endif
+}
+
+bool FilamentRunoutScreen::onTouchHeld(uint8_t tag) {
+ using namespace ExtUI;
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: setFilamentRunoutEnabled(!getFilamentRunoutEnabled()); break;
+ #ifdef FILAMENT_RUNOUT_DISTANCE_MM
+ case 10: UI_DECREMENT(FilamentRunoutDistance_mm); break;
+ case 11: UI_INCREMENT(FilamentRunoutDistance_mm); break;
+ #endif
+ default:
+ return false;
+ }
+
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/files_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/files_screen.cpp
new file mode 100644
index 0000000000..e8aaf36ff7
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/files_screen.cpp
@@ -0,0 +1,264 @@
+/********************
+ * files_screen.cpp *
+ ********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void FilesScreen::onEntry() {
+ screen_data.FilesScreen.cur_page = 0;
+ screen_data.FilesScreen.selected_tag = 0xFF;
+ #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810)
+ CLCD::mem_write_32(CLCD::REG::MACRO_0,DL::NOP);
+ #endif
+ gotoPage(0);
+ BaseScreen::onEntry();
+}
+
+const char *FilesScreen::getSelectedShortFilename() {
+ FileList files;
+ files.seek(getFileForTag(screen_data.FilesScreen.selected_tag), true);
+ return files.shortFilename();
+}
+
+const char *FilesScreen::getSelectedLongFilename() {
+ FileList files;
+ files.seek(getFileForTag(screen_data.FilesScreen.selected_tag), true);
+ return files.longFilename();
+}
+
+void FilesScreen::drawSelectedFile() {
+ FileList files;
+ files.seek(getFileForTag(screen_data.FilesScreen.selected_tag), true);
+ screen_data.FilesScreen.flags.is_dir = files.isDir();
+ drawFileButton(
+ files.filename(),
+ screen_data.FilesScreen.selected_tag,
+ screen_data.FilesScreen.flags.is_dir,
+ true
+ );
+}
+
+uint16_t FilesScreen::getFileForTag(uint8_t tag) {
+ return screen_data.FilesScreen.cur_page * files_per_page + tag - 2;
+}
+
+#ifdef TOUCH_UI_PORTRAIT
+ #define GRID_COLS 6
+ #define GRID_ROWS (files_per_page + header_h + footer_h)
+#else
+ #define GRID_COLS 6
+ #define GRID_ROWS (files_per_page + header_h + footer_h)
+#endif
+
+void FilesScreen::drawFileButton(const char* filename, uint8_t tag, bool is_dir, bool is_highlighted) {
+ const uint8_t line = getLineForTag(tag)+1;
+ CommandProcessor cmd;
+ cmd.tag(tag);
+ cmd.cmd(COLOR_RGB(is_highlighted ? fg_action : bg_color));
+ cmd.font(font_medium)
+ .rectangle( 0, BTN_Y(header_h+line), display_width, BTN_H(1));
+ cmd.cmd(COLOR_RGB(is_highlighted ? normal_btn.rgb : bg_text_enabled));
+ #if ENABLED(SCROLL_LONG_FILENAMES)
+ if (is_highlighted) {
+ cmd.cmd(SAVE_CONTEXT());
+ cmd.cmd(MACRO(0));
+ }
+ #endif
+ cmd.text (BTN_POS(1,header_h+line), BTN_SIZE(6,1), filename, OPT_CENTERY);
+ if (is_dir) {
+ cmd.text(BTN_POS(1,header_h+line), BTN_SIZE(6,1), F("> "), OPT_CENTERY | OPT_RIGHTX);
+ }
+ #if ENABLED(SCROLL_LONG_FILENAMES)
+ if (is_highlighted) {
+ cmd.cmd(RESTORE_CONTEXT());
+ }
+ #endif
+}
+
+void FilesScreen::drawFileList() {
+ FileList files;
+ screen_data.FilesScreen.num_page = max(1,(ceil)(float(files.count()) / files_per_page));
+ screen_data.FilesScreen.cur_page = min(screen_data.FilesScreen.cur_page, screen_data.FilesScreen.num_page-1);
+ screen_data.FilesScreen.flags.is_root = files.isAtRootDir();
+
+ #undef MARGIN_T
+ #undef MARGIN_B
+ #define MARGIN_T 0
+ #define MARGIN_B 0
+ uint16_t fileIndex = screen_data.FilesScreen.cur_page * files_per_page;
+ for(uint8_t i = 0; i < files_per_page; i++, fileIndex++) {
+ if (files.seek(fileIndex)) {
+ drawFileButton(files.filename(), getTagForLine(i), files.isDir(), false);
+ } else {
+ break;
+ }
+ }
+}
+
+void FilesScreen::drawHeader() {
+ const bool prev_enabled = screen_data.FilesScreen.cur_page > 0;
+ const bool next_enabled = screen_data.FilesScreen.cur_page < (screen_data.FilesScreen.num_page - 1);
+
+ #undef MARGIN_T
+ #undef MARGIN_B
+ #define MARGIN_T 0
+ #define MARGIN_B 2
+
+ char str[16];
+ sprintf_P(str, PSTR("Page %d of %d"),
+ screen_data.FilesScreen.cur_page + 1, screen_data.FilesScreen.num_page);
+
+
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(font_small)
+ .tag(0).button( BTN_POS(2,1), BTN_SIZE(4,header_h), str, OPT_CENTER | OPT_FLAT)
+ .font(font_medium)
+ .colors(action_btn)
+ .tag(241).enabled(prev_enabled).button( BTN_POS(1,1), BTN_SIZE(1,header_h), F("<"))
+ .tag(242).enabled(next_enabled).button( BTN_POS(6,1), BTN_SIZE(1,header_h), F(">"));
+}
+
+void FilesScreen::drawFooter() {
+ #undef MARGIN_T
+ #undef MARGIN_B
+ #ifdef TOUCH_UI_PORTRAIT
+ #define MARGIN_T 15
+ #define MARGIN_B 5
+ #else
+ #define MARGIN_T 5
+ #define MARGIN_B 5
+ #endif
+ const bool has_selection = screen_data.FilesScreen.selected_tag != 0xFF;
+ const uint8_t back_tag = screen_data.FilesScreen.flags.is_root ? 240 : 245;
+ const uint8_t y = GRID_ROWS - footer_h + 1;
+ const uint8_t h = footer_h;
+
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(font_medium)
+ .colors(has_selection ? normal_btn : action_btn)
+ .tag(back_tag).button( BTN_POS(4,y), BTN_SIZE(3,h), F("Back"))
+ .enabled(has_selection)
+ .colors(has_selection ? action_btn : normal_btn);
+ if (screen_data.FilesScreen.flags.is_dir) {
+ cmd.tag(244).button( BTN_POS(1, y), BTN_SIZE(3,h), F("Open"));
+ } else {
+ cmd.tag(243).button( BTN_POS(1, y), BTN_SIZE(3,h), F("Print"));
+ }
+}
+
+void FilesScreen::onRedraw(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ drawHeader();
+ drawSelectedFile();
+ drawFooter();
+ }
+}
+
+void FilesScreen::gotoPage(uint8_t page) {
+ screen_data.FilesScreen.selected_tag = 0xFF;
+ screen_data.FilesScreen.cur_page = page;
+ CommandProcessor cmd;
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .colors(normal_btn);
+ drawFileList();
+ storeBackground();
+}
+
+bool FilesScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 240: GOTO_PREVIOUS(); return true;
+ case 241:
+ if (screen_data.FilesScreen.cur_page > 0) {
+ gotoPage(screen_data.FilesScreen.cur_page-1);
+ }
+ break;
+ case 242:
+ if (screen_data.FilesScreen.cur_page < (screen_data.FilesScreen.num_page-1)) {
+ gotoPage(screen_data.FilesScreen.cur_page+1);
+ }
+ break;
+ case 243:
+ printFile(getSelectedShortFilename());
+ StatusScreen::setStatusMessage(F("Print Starting"));
+ GOTO_SCREEN(StatusScreen);
+ return true;
+ case 244:
+ {
+ FileList files;
+ files.changeDir(getSelectedShortFilename());
+ gotoPage(0);
+ }
+ break;
+ case 245:
+ {
+ FileList files;
+ files.upDir();
+ gotoPage(0);
+ }
+ break;
+ default:
+ if (tag < 240) {
+ screen_data.FilesScreen.selected_tag = tag;
+ #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810)
+ if (FTDI::ftdi_chip >= 810) {
+ const char *longFilename = getSelectedLongFilename();
+ if (longFilename[0]) {
+ CLCD::FontMetrics fm(font_medium);
+ uint16_t text_width = fm.get_text_width(longFilename);
+ screen_data.FilesScreen.scroll_pos = 0;
+ if (text_width > display_width)
+ screen_data.FilesScreen.scroll_max = text_width - display_width + MARGIN_L + MARGIN_R;
+ else
+ screen_data.FilesScreen.scroll_max = 0;
+ }
+ }
+ #endif
+ }
+ break;
+ }
+ return true;
+}
+
+void FilesScreen::onIdle() {
+ #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810)
+ if (FTDI::ftdi_chip >= 810) {
+ CLCD::mem_write_32(CLCD::REG::MACRO_0,
+ VERTEX_TRANSLATE_X(-int32_t(screen_data.FilesScreen.scroll_pos)));
+ if (screen_data.FilesScreen.scroll_pos < screen_data.FilesScreen.scroll_max * 16)
+ screen_data.FilesScreen.scroll_pos++;
+ }
+ #endif
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_settings_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_settings_screen.cpp
new file mode 100644
index 0000000000..265d0e103a
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_settings_screen.cpp
@@ -0,0 +1,285 @@
+/*********************************
+ * interface_settings_screen.cpp *
+ *********************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+#include "../archim2-flash/flash_storage.h"
+
+#include "../../../../../module/configuration_store.h"
+
+#if ENABLED(LULZBOT_PRINTCOUNTER)
+ #include "../../../../../module/printcounter.h"
+#endif
+
+bool restoreEEPROM();
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+constexpr bool PERSISTENT_STORE_SUCCESS = false; // persistentStore uses true for error
+
+void InterfaceSettingsScreen::onStartup() {
+}
+
+void InterfaceSettingsScreen::onEntry() {
+ screen_data.InterfaceSettingsScreen.brightness = CLCD::get_brightness();
+ screen_data.InterfaceSettingsScreen.volume = SoundPlayer::get_volume();
+ BaseScreen::onEntry();
+}
+
+void InterfaceSettingsScreen::onRedraw(draw_mode_t what) {
+ CommandProcessor cmd;
+
+ if (what & BACKGROUND) {
+
+ #define GRID_COLS 4
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 7
+ #else
+ #define GRID_ROWS 6
+ #endif
+
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .tag(0)
+ .font(font_medium)
+ .text(BTN_POS(1,1), BTN_SIZE(4,1), F("Interface Settings"))
+ #undef EDGE_R
+ #define EDGE_R 30
+ .font(font_small)
+ .tag(0)
+ .text(BTN_POS(1,2), BTN_SIZE(2,1), F("LCD brightness:"), OPT_RIGHTX | OPT_CENTERY)
+ .text(BTN_POS(1,3), BTN_SIZE(2,1), F("Sound volume:"), OPT_RIGHTX | OPT_CENTERY)
+ .text(BTN_POS(1,4), BTN_SIZE(2,1), F("Screen lock:"), OPT_RIGHTX | OPT_CENTERY);
+ cmd.text(BTN_POS(1,5), BTN_SIZE(2,1), F("Boot screen:"), OPT_RIGHTX | OPT_CENTERY);
+ #undef EDGE_R
+ }
+
+ if (what & FOREGROUND) {
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr uint8_t w = 2;
+ #else
+ constexpr uint8_t w = 1;
+ #endif
+
+ cmd.font(font_medium)
+ #define EDGE_R 30
+ .colors(ui_slider)
+ .tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.brightness, 128)
+ .tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF)
+ .colors(ui_toggle)
+ .tag(4).toggle(BTN_POS(3,4), BTN_SIZE(w,1), F("off\xFFon"), LockScreen::is_enabled())
+ .tag(5).toggle(BTN_POS(3,5), BTN_SIZE(w,1), F("off\xFFon"), UIData::animations_enabled())
+ #undef EDGE_R
+ #define EDGE_R 0
+ #ifdef TOUCH_UI_PORTRAIT
+ .colors(normal_btn)
+ .tag(6).button (BTN_POS(1,6), BTN_SIZE(4,1), F("Customize Sounds"))
+ .colors(action_btn)
+ .tag(1).button (BTN_POS(1,7), BTN_SIZE(4,1), F("Back"));
+ #else
+ .tag(6).button (BTN_POS(1,6), BTN_SIZE(2,1), F("Customize Sounds"))
+ .colors(action_btn)
+ .tag(1).button (BTN_POS(3,6), BTN_SIZE(2,1), F("Back"));
+ #endif
+ }
+}
+
+bool InterfaceSettingsScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); return true;
+ case 4:
+ if (!LockScreen::is_enabled())
+ LockScreen::enable();
+ else
+ LockScreen::disable();
+ break;
+ case 5: UIData::enable_animations(!UIData::animations_enabled());; break;
+ case 6: GOTO_SCREEN(InterfaceSoundsScreen); return true;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+bool InterfaceSettingsScreen::onTouchStart(uint8_t tag) {
+ #undef EDGE_R
+ #define EDGE_R 30
+ CommandProcessor cmd;
+ switch (tag) {
+ case 2: cmd.track_linear(BTN_POS(3,3), BTN_SIZE(2,1), 2).execute(); break;
+ case 3: cmd.track_linear(BTN_POS(3,4), BTN_SIZE(2,1), 3).execute(); break;
+ default: break;
+ }
+ #undef EDGE_R
+ #define EDGE_R 0
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ return true;
+}
+
+void InterfaceSettingsScreen::onIdle() {
+ if (refresh_timer.elapsed(TOUCH_UPDATE_INTERVAL)) {
+ refresh_timer.start();
+
+ uint16_t value;
+ CommandProcessor cmd;
+ switch (cmd.track_tag(value)) {
+ case 2:
+ screen_data.InterfaceSettingsScreen.brightness = float(value) * 128 / 0xFFFF;
+ CLCD::set_brightness(screen_data.InterfaceSettingsScreen.brightness);
+ SaveSettingsDialogBox::settingsChanged();
+ break;
+ case 3:
+ screen_data.InterfaceSettingsScreen.volume = value >> 8;
+ SoundPlayer::set_volume(screen_data.InterfaceSettingsScreen.volume);
+ SaveSettingsDialogBox::settingsChanged();
+ break;
+ default:
+ return;
+ }
+ onRefresh();
+ }
+ BaseScreen::onIdle();
+}
+
+void InterfaceSettingsScreen::failSafeSettings() {
+ // Reset settings that may make the printer interface
+ // unusable.
+ CLCD::mem_write_32(CLCD::REG::ROTATE, 0);
+ CLCD::default_touch_transform();
+ CLCD::default_display_orientation();
+ CLCD::set_brightness(255);
+ UIData::reset_persistent_data();
+ CLCD::mem_write_16(CLCD::REG::HOFFSET, FTDI::Hoffset);
+ CLCD::mem_write_16(CLCD::REG::VOFFSET, FTDI::Voffset);
+}
+
+void InterfaceSettingsScreen::defaultSettings() {
+ LockScreen::passcode = 0;
+ SoundPlayer::set_volume(255);
+ CLCD::set_brightness(255);
+ UIData::reset_persistent_data();
+ InterfaceSoundsScreen::defaultSettings();
+ CLCD::mem_write_16(CLCD::REG::HOFFSET, FTDI::Hoffset);
+ CLCD::mem_write_16(CLCD::REG::VOFFSET, FTDI::Voffset);
+}
+
+void InterfaceSettingsScreen::saveSettings(char *buff) {
+ static_assert(
+ ExtUI::eeprom_data_size >= sizeof(persistent_data_t),
+ "Insufficient space in EEPROM for UI parameters"
+ );
+
+ SERIAL_ECHOLNPGM("Writing setting to EEPROM");
+
+ persistent_data_t eeprom;
+
+ eeprom.passcode = LockScreen::passcode;
+ eeprom.sound_volume = SoundPlayer::get_volume();
+ eeprom.display_brightness = CLCD::get_brightness();
+ eeprom.bit_flags = UIData::get_persistent_data();
+ eeprom.touch_transform_a = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_A);
+ eeprom.touch_transform_b = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_B);
+ eeprom.touch_transform_c = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_C);
+ eeprom.touch_transform_d = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_D);
+ eeprom.touch_transform_e = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_E);
+ eeprom.touch_transform_f = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_F);
+ eeprom.display_h_offset_adj = CLCD::mem_read_16(CLCD::REG::HOFFSET) - FTDI::Hoffset;
+ eeprom.display_v_offset_adj = CLCD::mem_read_16(CLCD::REG::VOFFSET) - FTDI::Voffset;
+ for(uint8_t i = 0; i < InterfaceSoundsScreen::NUM_EVENTS; i++)
+ eeprom.event_sounds[i] = InterfaceSoundsScreen::event_sounds[i];
+
+ memcpy(buff, &eeprom, sizeof(eeprom));
+}
+
+void InterfaceSettingsScreen::loadSettings(const char *buff) {
+ static_assert(
+ ExtUI::eeprom_data_size >= sizeof(persistent_data_t),
+ "Insufficient space in EEPROM for UI parameters"
+ );
+
+ persistent_data_t eeprom;
+ memcpy(&eeprom, buff, sizeof(eeprom));
+
+ SERIAL_ECHOLNPGM("Loading setting from EEPROM");
+
+ LockScreen::passcode = eeprom.passcode;
+ SoundPlayer::set_volume(eeprom.sound_volume);
+ UIData::set_persistent_data(eeprom.bit_flags);
+ CLCD::set_brightness(eeprom.display_brightness);
+ CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_A, eeprom.touch_transform_a);
+ CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_B, eeprom.touch_transform_b);
+ CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_C, eeprom.touch_transform_c);
+ CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_D, eeprom.touch_transform_d);
+ CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_E, eeprom.touch_transform_e);
+ CLCD::mem_write_32(CLCD::REG::TOUCH_TRANSFORM_F, eeprom.touch_transform_f);
+ CLCD::mem_write_16(CLCD::REG::HOFFSET, eeprom.display_h_offset_adj + FTDI::Hoffset);
+ CLCD::mem_write_16(CLCD::REG::VOFFSET, eeprom.display_v_offset_adj + FTDI::Voffset);
+ for(uint8_t i = 0; i < InterfaceSoundsScreen::NUM_EVENTS; i++)
+ InterfaceSoundsScreen::event_sounds[i] = eeprom.event_sounds[i];
+
+ #if ENABLED(DEVELOPER_SCREENS)
+ StressTestScreen::startupCheck();
+ #endif
+}
+
+#ifdef LULZBOT_EEPROM_BACKUP_SIZE
+ #include "../../../../../HAL/shared/persistent_store_api.h"
+
+ bool restoreEEPROM() {
+ uint8_t data[LULZBOT_EEPROM_BACKUP_SIZE];
+
+ bool success = UIFlashStorage::read_config_data(data, LULZBOT_EEPROM_BACKUP_SIZE);
+
+ if (success)
+ success = persistentStore.write_data(0, data, LULZBOT_EEPROM_BACKUP_SIZE) == PERSISTENT_STORE_SUCCESS;
+
+ if (success)
+ StatusScreen::setStatusMessage(F("Settings restored from backup"));
+ else
+ StatusScreen::setStatusMessage(F("Settings restored to default"));
+
+ return success;
+ }
+
+ bool InterfaceSettingsScreen::backupEEPROM() {
+ uint8_t data[LULZBOT_EEPROM_BACKUP_SIZE];
+
+ if (persistentStore.read_data(0, data, LULZBOT_EEPROM_BACKUP_SIZE) != PERSISTENT_STORE_SUCCESS)
+ return false;
+
+ UIFlashStorage::write_config_data(data, LULZBOT_EEPROM_BACKUP_SIZE);
+
+ return true;
+ }
+#endif
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_sounds_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_sounds_screen.cpp
new file mode 100644
index 0000000000..a1a05d0806
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/interface_sounds_screen.cpp
@@ -0,0 +1,160 @@
+/*******************************
+ * interface_sounds_screen.cpp *
+ *******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+uint8_t InterfaceSoundsScreen::event_sounds[];
+
+const char* InterfaceSoundsScreen::getSoundSelection(event_t event) {
+ return SoundList::name(event_sounds[event]);
+}
+
+void InterfaceSoundsScreen::toggleSoundSelection(event_t event) {
+ event_sounds[event] = (event_sounds[event]+1) % SoundList::n;
+ playEventSound(event);
+}
+
+void InterfaceSoundsScreen::setSoundSelection(event_t event, const SoundPlayer::sound_t* sound) {
+ for(uint8_t i = 0; i < SoundList::n; i++)
+ if (SoundList::data(i) == sound)
+ event_sounds[event] = i;
+}
+
+void InterfaceSoundsScreen::playEventSound(event_t event, play_mode_t mode) {
+ sound.play(SoundList::data(event_sounds[event]), mode);
+}
+
+void InterfaceSoundsScreen::defaultSettings() {
+ setSoundSelection(PRINTING_STARTED, twinkle);
+ setSoundSelection(PRINTING_FINISHED, fanfare);
+ setSoundSelection(PRINTING_FAILED, sad_trombone);
+}
+
+void InterfaceSoundsScreen::onRedraw(draw_mode_t what) {
+ CommandProcessor cmd;
+
+ if (what & BACKGROUND) {
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .tag(0)
+
+ #define GRID_COLS 4
+ #define GRID_ROWS 9
+
+ .font(font_medium)
+ .text(BTN_POS(1,1), BTN_SIZE(4,1), F("Interface Sounds"))
+ #undef EDGE_R
+ #define EDGE_R 30
+ .font(font_small)
+ .tag(0).text (BTN_POS(1,2), BTN_SIZE(2,1), F("Sound volume:"), OPT_RIGHTX | OPT_CENTERY)
+ .text (BTN_POS(1,3), BTN_SIZE(2,1), F("Click sounds:"), OPT_RIGHTX | OPT_CENTERY)
+ .text (BTN_POS(1,5), BTN_SIZE(2,1), F("Print starting:"), OPT_RIGHTX | OPT_CENTERY)
+ .text (BTN_POS(1,6), BTN_SIZE(2,1), F("Print finished:"), OPT_RIGHTX | OPT_CENTERY)
+ .text (BTN_POS(1,7), BTN_SIZE(2,1), F("Print error:"), OPT_RIGHTX | OPT_CENTERY);
+ #undef EDGE_R
+ }
+
+ if (what & FOREGROUND) {
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr uint8_t w = 2;
+ #else
+ constexpr uint8_t w = 1;
+ #endif
+
+ cmd.font(font_medium)
+ .colors(ui_slider)
+ #define EDGE_R 30
+ .tag(2).slider (BTN_POS(3,2), BTN_SIZE(2,1), screen_data.InterfaceSettingsScreen.volume, 0xFF)
+ .colors(ui_toggle)
+ .tag(3).toggle (BTN_POS(3,3), BTN_SIZE(w,1), F("off\xFFon"), UIData::touch_sounds_enabled())
+ #undef EDGE_R
+ .colors(normal_btn)
+ #define EDGE_R 0
+ .tag(4).button (BTN_POS(3,5), BTN_SIZE(2,1), getSoundSelection(PRINTING_STARTED))
+ .tag(5).button (BTN_POS(3,6), BTN_SIZE(2,1), getSoundSelection(PRINTING_FINISHED))
+ .tag(6).button (BTN_POS(3,7), BTN_SIZE(2,1), getSoundSelection(PRINTING_FAILED))
+ .colors(action_btn)
+ .tag(1).button (BTN_POS(1,9), BTN_SIZE(4,1), F("Back"));
+ }
+}
+
+void InterfaceSoundsScreen::onEntry() {
+ screen_data.InterfaceSettingsScreen.volume = SoundPlayer::get_volume();
+ BaseScreen::onEntry();
+}
+
+bool InterfaceSoundsScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); return true;
+ case 3: UIData::enable_touch_sounds(!UIData::touch_sounds_enabled()); break;
+ case 4: toggleSoundSelection(PRINTING_STARTED); break;
+ case 5: toggleSoundSelection(PRINTING_FINISHED); break;
+ case 6: toggleSoundSelection(PRINTING_FAILED); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+bool InterfaceSoundsScreen::onTouchStart(uint8_t tag) {
+ CommandProcessor cmd;
+ #undef EDGE_R
+ #define EDGE_R 30
+ switch (tag) {
+ case 2: cmd.track_linear(BTN_POS(3,2), BTN_SIZE(2,1), 2).execute(); break;
+ default: break;
+ }
+ return true;
+}
+
+void InterfaceSoundsScreen::onIdle() {
+ if (refresh_timer.elapsed(TOUCH_UPDATE_INTERVAL)) {
+ refresh_timer.start();
+
+ uint16_t value;
+ CommandProcessor cmd;
+ switch (cmd.track_tag(value)) {
+ case 2:
+ screen_data.InterfaceSettingsScreen.volume = value >> 8;
+ SoundPlayer::set_volume(screen_data.InterfaceSettingsScreen.volume);
+ SaveSettingsDialogBox::settingsChanged();
+ break;
+ default:
+ return;
+ }
+ onRefresh();
+ }
+ BaseScreen::onIdle();
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/jerk_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/jerk_screen.cpp
new file mode 100644
index 0000000000..7ffb4c5ddf
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/jerk_screen.cpp
@@ -0,0 +1,65 @@
+/*******************
+ * jerk_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && DISABLED(JUNCTION_DEVIATION)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void JerkScreen::onRedraw(draw_mode_t what) {
+
+ widgets_t w(what);
+ w.precision(1);
+ w.units(PSTR("mm/s"));
+ w.heading( PSTR("Maximum Jerk"));
+ w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisMaxJerk_mm_s(X) );
+ w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisMaxJerk_mm_s(Y) );
+ w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisMaxJerk_mm_s(Z) );
+ w.color(e_axis) .adjuster( 8, PSTR("E:"), getAxisMaxJerk_mm_s(E0) );
+ w.increments();
+}
+
+bool JerkScreen::onTouchHeld(uint8_t tag) {
+ using namespace ExtUI;
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(AxisMaxJerk_mm_s, X); break;
+ case 3: UI_INCREMENT(AxisMaxJerk_mm_s, X); break;
+ case 4: UI_DECREMENT(AxisMaxJerk_mm_s, Y); break;
+ case 5: UI_INCREMENT(AxisMaxJerk_mm_s, Y); break;
+ case 6: UI_DECREMENT(AxisMaxJerk_mm_s, Z); break;
+ case 7: UI_INCREMENT(AxisMaxJerk_mm_s, Z); break;
+ case 8: UI_DECREMENT(AxisMaxJerk_mm_s, E0); break;
+ case 9: UI_INCREMENT(AxisMaxJerk_mm_s, E0); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp
new file mode 100644
index 0000000000..806055ded5
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/junction_deviation_screen.cpp
@@ -0,0 +1,54 @@
+/*******************
+ * boot_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(JUNCTION_DEVIATION)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void JunctionDeviationScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(2);
+ w.units(PSTR("mm"));
+ w.heading( PSTR("Junction Deviation"));
+ w.color(other) .adjuster( 2, PSTR(""), getJunctionDeviation_mm() );
+ w.increments();
+}
+
+bool JunctionDeviationScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(JunctionDeviation_mm); break;
+ case 3: UI_INCREMENT(JunctionDeviation_mm); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/kill_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/kill_screen.cpp
new file mode 100644
index 0000000000..84cbd583cd
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/kill_screen.cpp
@@ -0,0 +1,62 @@
+/*******************
+ * kill_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+
+// The kill screen is an oddball that happens after Marlin has killed the events
+// loop. So we only have a show() method rather than onRedraw(). The KillScreen
+// should not be used as a model for other UI screens as it is an exception.
+
+void KillScreen::show(progmem_str message) {
+ CommandProcessor cmd;
+
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true))
+ .tag(0);
+
+ #define GRID_COLS 4
+ #define GRID_ROWS 8
+
+ cmd.font(Theme::font_large)
+ .cmd(COLOR_RGB(Theme::bg_text_enabled))
+ .text(BTN_POS(1,2), BTN_SIZE(4,1), message)
+ .text(BTN_POS(1,3), BTN_SIZE(4,1), F("PRINTER HALTED"))
+ .text(BTN_POS(1,6), BTN_SIZE(4,1), F("Please reset"));
+
+ #undef GRID_COLS
+ #undef GRID_ROWS
+
+ cmd.cmd(DL::DL_DISPLAY)
+ .cmd(CMD_SWAP)
+ .execute();
+
+ InterfaceSoundsScreen::playEventSound(InterfaceSoundsScreen::PRINTING_FAILED, PLAY_SYNCHRONOUS);
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp
new file mode 100644
index 0000000000..499b9db595
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/linear_advance_screen.cpp
@@ -0,0 +1,77 @@
+/*****************************
+ * linear_advance_screen.cpp *
+ *****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(LIN_ADVANCE)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void LinearAdvanceScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(2, DEFAULT_LOWEST).color(e_axis);
+ w.heading( PSTR("Linear Advance:"));
+ #if EXTRUDERS == 1
+ w.adjuster( 2, PSTR("K:"), getLinearAdvance_mm_mm_s(E0) );
+ #else
+ w.adjuster( 2, PSTR("K E1:"), getLinearAdvance_mm_mm_s(E0) );
+ w.adjuster( 4, PSTR("K E2:"), getLinearAdvance_mm_mm_s(E1) );
+ #if EXTRUDERS > 2
+ w.adjuster( 6, PSTR("K E3:"), getLinearAdvance_mm_mm_s(E2) );
+ #if EXTRUDERS > 3
+ w.adjuster( 8, PSTR("K E4:"), getLinearAdvance_mm_mm_s(E3) );
+ #endif
+ #endif
+ #endif
+ w.increments();
+}
+
+bool LinearAdvanceScreen::onTouchHeld(uint8_t tag) {
+ using namespace ExtUI;
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(LinearAdvance_mm_mm_s, E0); break;
+ case 3: UI_INCREMENT(LinearAdvance_mm_mm_s, E0); break;
+ #if EXTRUDERS > 1
+ case 4: UI_DECREMENT(LinearAdvance_mm_mm_s, E1); break;
+ case 5: UI_INCREMENT(LinearAdvance_mm_mm_s, E1); break;
+ #if EXTRUDERS > 2
+ case 6: UI_DECREMENT(LinearAdvance_mm_mm_s, E2); break;
+ case 7: UI_INCREMENT(LinearAdvance_mm_mm_s, E2); break;
+ #if EXTRUDERS > 3
+ case 8: UI_DECREMENT(LinearAdvance_mm_mm_s, E3); break;
+ case 9: UI_INCREMENT(LinearAdvance_mm_mm_s, E3); break;
+ #endif
+ #endif
+ #endif
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/lock_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/lock_screen.cpp
new file mode 100644
index 0000000000..99b78933ac
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/lock_screen.cpp
@@ -0,0 +1,214 @@
+/*******************
+ * lock_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+uint16_t LockScreen::passcode = 0;
+
+void LockScreen::onEntry() {
+ const uint8_t siz = sizeof(screen_data.LockScreen.passcode);
+ memset(screen_data.LockScreen.passcode, '_', siz-1);
+ screen_data.LockScreen.passcode[siz-1] = '\0';
+ BaseScreen::onEntry();
+}
+
+void LockScreen::onRedraw(draw_mode_t what) {
+ CommandProcessor cmd;
+
+ if (what & BACKGROUND) {
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .tag(0);
+ }
+
+ if (what & FOREGROUND) {
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_COLS 1
+ #define GRID_ROWS 10
+ #else
+ #define GRID_COLS 1
+ #define GRID_ROWS 7
+ #endif
+
+ #undef MARGIN_T
+ #undef MARGIN_B
+ #define MARGIN_T 3
+ #define MARGIN_B 3
+
+ progmem_str message;
+ switch (message_style()) {
+ case 'w':
+ message = F("Wrong passcode!");
+ break;
+ case 'g':
+ message = F("Passcode accepted!");
+ break;
+ default:
+ if (passcode == 0) {
+ message = F("Select Passcode:");
+ } else {
+ message = F("Enter Passcode:");
+ }
+ }
+ message_style() = '\0'; // Terminate the string.
+
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr uint8_t l = 6;
+ #else
+ constexpr uint8_t l = 3;
+ #endif
+
+ const uint8_t pressed = EventLoop::get_pressed_tag();
+
+ cmd.font(font_large)
+ .cmd(COLOR_RGB(bg_text_enabled))
+ #ifdef TOUCH_UI_PORTRAIT
+ .text(BTN_POS(1,2), BTN_SIZE(1,1), message)
+ .font(font_xlarge)
+ .text(BTN_POS(1,4), BTN_SIZE(1,1), screen_data.LockScreen.passcode)
+ #else
+ .text(BTN_POS(1,1), BTN_SIZE(1,1), message)
+ .font(font_xlarge)
+ .text(BTN_POS(1,2), BTN_SIZE(1,1), screen_data.LockScreen.passcode)
+ #endif
+ .font(font_large)
+ .colors(normal_btn)
+ #ifdef TOUCH_UI_PASSCODE
+ .keys(BTN_POS(1,l+1), BTN_SIZE(1,1), F("123"), pressed)
+ .keys(BTN_POS(1,l+2), BTN_SIZE(1,1), F("456"), pressed)
+ .keys(BTN_POS(1,l+3), BTN_SIZE(1,1), F("789"), pressed)
+ .keys(BTN_POS(1,l+4), BTN_SIZE(1,1), F("0.<"), pressed);
+ #else
+ .keys(BTN_POS(1,l+1), BTN_SIZE(1,1), F("1234567890"), pressed)
+ .keys(BTN_POS(1,l+2), BTN_SIZE(1,1), F("qwertyuiop"), pressed)
+ .keys(BTN_POS(1,l+3), BTN_SIZE(1,1), F("asdfghjkl "), pressed)
+ .keys(BTN_POS(1,l+4), BTN_SIZE(1,1), F("zxcvbnm!?<"), pressed);
+ #endif
+
+ #undef MARGIN_T
+ #undef MARGIN_B
+ #define MARGIN_T MARGIN_DEFAULT
+ #define MARGIN_B MARGIN_DEFAULT
+
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ }
+}
+
+char &LockScreen::message_style() {
+ // We use the last byte of the passcode string as a flag to indicate,
+ // which message to show.
+ constexpr uint8_t last_char = sizeof(screen_data.LockScreen.passcode)-1;
+ return screen_data.LockScreen.passcode[last_char];
+}
+
+void LockScreen::onPasscodeEntered() {
+ if (passcode == 0) {
+ // We are defining a passcode
+ message_style() = 0;
+ onRefresh();
+ sound.play(twinkle, PLAY_SYNCHRONOUS);
+ passcode = compute_checksum();
+ GOTO_PREVIOUS();
+ } else {
+ // We are verifying a passcode
+ if (passcode == compute_checksum()) {
+ message_style() = 'g';
+ onRefresh();
+ sound.play(twinkle, PLAY_SYNCHRONOUS);
+ GOTO_PREVIOUS();
+ } else {
+ message_style() = 'w';
+ onRefresh();
+ sound.play(sad_trombone, PLAY_SYNCHRONOUS);
+ current_screen.forget(); // Discard the screen the user was trying to go to.
+ GOTO_PREVIOUS();
+ }
+ }
+}
+
+bool LockScreen::onTouchEnd(uint8_t tag) {
+ char *c = strchr(screen_data.LockScreen.passcode,'_');
+ if (c) {
+ if (tag == '<') {
+ if (c != screen_data.LockScreen.passcode) {
+ // Backspace deletes previous entered characters.
+ *--c = '_';
+ }
+ } else {
+ // Append character to passcode
+ *c++ = tag;
+ if (*c == '\0') {
+ // If at last character, then process the code.
+ onPasscodeEntered();
+ }
+ }
+ }
+ return true;
+}
+
+uint16_t LockScreen::compute_checksum() {
+ uint16_t checksum = 0;
+ const char* c = screen_data.LockScreen.passcode;
+ while (*c) {
+ checksum = (checksum << 2) ^ *c++;
+ }
+ if (checksum == 0) checksum = 0xFFFF; // Prevent a zero checksum
+ return checksum;
+}
+
+// This function should be called *after* calling GOTO_SCREEN
+// to move to new screen. If a passcode is enabled, it will
+// immediately jump to the keypad screen, pushing the previous
+// screen onto the stack. If the code is entered correctly,
+// the stack will be popped, allowing the user to proceed to
+// the new screen. Otherwise it will be popped twice, taking
+// the user back to where they were before.
+void LockScreen::check_passcode() {
+ if (passcode == 0) return;
+ message_style() = 0;
+ GOTO_SCREEN(LockScreen);
+}
+
+bool LockScreen::is_enabled() {
+ return passcode != 0;
+}
+
+void LockScreen::disable() {
+ passcode = 0;
+}
+
+void LockScreen::enable() {
+ message_style() = 0;
+ passcode = 0;
+ GOTO_SCREEN(LockScreen);
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/main_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/main_menu.cpp
new file mode 100644
index 0000000000..9c6a3f4c2d
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/main_menu.cpp
@@ -0,0 +1,123 @@
+/*****************
+ * main_menu.cpp *
+ *****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void MainMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true));
+ }
+
+ if (what & FOREGROUND) {
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(Theme::font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 8
+ #define GRID_COLS 2
+ .tag(2).button( BTN_POS(1,1), BTN_SIZE(1,1), F("Auto Home"))
+ #ifdef NOZZLE_CLEAN_FEATURE
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(3).button( BTN_POS(2,1), BTN_SIZE(1,1), F("Clean Nozzle"))
+ .tag(4).button( BTN_POS(1,2), BTN_SIZE(1,1), F("Move Axis"))
+ .tag(5).button( BTN_POS(2,2), BTN_SIZE(1,1), F("Motors Off"))
+ .tag(6).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Temperature"))
+ .tag(7).button( BTN_POS(1,4), BTN_SIZE(2,1), F("Change Filament"))
+ .tag(8).button( BTN_POS(1,5), BTN_SIZE(2,1), F("Advanced Settings"))
+ #ifdef PRINTCOUNTER
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(9).button( BTN_POS(1,7), BTN_SIZE(2,1), F("Printer Statistics"))
+ .tag(10).button( BTN_POS(1,6), BTN_SIZE(2,1), F("About Printer"))
+ .colors(action_btn)
+ .tag(1).button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ #else
+ #define GRID_ROWS 5
+ #define GRID_COLS 2
+ .tag(2).button( BTN_POS(1,1), BTN_SIZE(1,1), F("Auto Home"))
+ #if ENABLED(NOZZLE_CLEAN_FEATURE)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(3).button( BTN_POS(2,1), BTN_SIZE(1,1), F("Clean Nozzle"))
+ .tag(4).button( BTN_POS(1,2), BTN_SIZE(1,1), F("Move Axis"))
+ .tag(5).button( BTN_POS(2,2), BTN_SIZE(1,1), F("Motors Off"))
+ .tag(6).button( BTN_POS(1,3), BTN_SIZE(1,1), F("Temperature"))
+ .tag(7).button( BTN_POS(2,3), BTN_SIZE(1,1), F("Change Filament"))
+ .tag(8).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Advanced Settings"))
+ #ifdef PRINTCOUNTER
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(9).button( BTN_POS(2,4), BTN_SIZE(1,1), F("Printer Statistics"))
+ .tag(10).button( BTN_POS(1,5), BTN_SIZE(1,1), F("About Printer"))
+ .colors(action_btn)
+ .tag(1).button( BTN_POS(2,5), BTN_SIZE(1,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ #endif
+ }
+}
+
+bool MainMenu::onTouchEnd(uint8_t tag) {
+ using namespace ExtUI;
+
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ case 2: SpinnerDialogBox::enqueueAndWait_P(F("G28")); break;
+ #if ENABLED(NOZZLE_CLEAN_FEATURE)
+ case 3: injectCommands_P(PSTR("G12")); GOTO_SCREEN(StatusScreen); break;
+ #endif
+ case 4: GOTO_SCREEN(MoveAxisScreen); break;
+ case 5: injectCommands_P(PSTR("M84")); break;
+ case 6: GOTO_SCREEN(TemperatureScreen); break;
+ case 7: GOTO_SCREEN(ChangeFilamentScreen); break;
+ case 8: GOTO_SCREEN(AdvancedSettingsMenu); break;
+#if ENABLED(PRINTCOUNTER)
+ case 9: GOTO_SCREEN(StatisticsScreen); break;
+#endif
+ case 10: GOTO_SCREEN(AboutScreen); break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_acceleration_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_acceleration_screen.cpp
new file mode 100644
index 0000000000..ccc58b5a3c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_acceleration_screen.cpp
@@ -0,0 +1,85 @@
+/*******************************
+ * max_acceleration_screen.cpp *
+ *******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void MaxAccelerationScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0);
+ w.units(PSTR("mm/s^2"));
+ w.heading( PSTR("Maximum Acceleration"));
+ w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisMaxAcceleration_mm_s2(X) );
+ w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisMaxAcceleration_mm_s2(Y) );
+ w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisMaxAcceleration_mm_s2(Z) );
+ #if EXTRUDERS == 1 || DISABLED(DISTINCT_E_FACTORS)
+ w.color(e_axis).adjuster( 8, PSTR("E:"), getAxisMaxAcceleration_mm_s2(E0) );
+ #elif EXTRUDERS > 1
+ w.color(e_axis).adjuster( 8, PSTR("E1:"), getAxisMaxAcceleration_mm_s2(E0) );
+ w.color(e_axis).adjuster(10, PSTR("E2:"), getAxisMaxAcceleration_mm_s2(E1) );
+ #if EXTRUDERS > 2
+ w.color(e_axis).adjuster(12, PSTR("E3:"), getAxisMaxAcceleration_mm_s2(E2) );
+ #endif
+ #if EXTRUDERS > 3
+ w.color(e_axis).adjuster(14, PSTR("E4:"), getAxisMaxAcceleration_mm_s2(E3) );
+ #endif
+ #endif
+ w.increments();
+}
+
+bool MaxAccelerationScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(AxisMaxAcceleration_mm_s2, X ); break;
+ case 3: UI_INCREMENT(AxisMaxAcceleration_mm_s2, X ); break;
+ case 4: UI_DECREMENT(AxisMaxAcceleration_mm_s2, Y ); break;
+ case 5: UI_INCREMENT(AxisMaxAcceleration_mm_s2, Y ); break;
+ case 6: UI_DECREMENT(AxisMaxAcceleration_mm_s2, Z ); break;
+ case 7: UI_INCREMENT(AxisMaxAcceleration_mm_s2, Z ); break;
+ case 8: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E0); break;
+ case 9: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E0); break;
+ #if EXTRUDERS > 1 && ENABLED(DISTINCT_E_FACTORS)
+ case 10: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E1); break;
+ case 11: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E1); break;
+ #endif
+ #if EXTRUDERS > 2 && ENABLED(DISTINCT_E_FACTORS)
+ case 12: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E2); break;
+ case 13: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E2); break;
+ #endif
+ #if EXTRUDERS > 3 && ENABLED(DISTINCT_E_FACTORS)
+ case 14: UI_DECREMENT(AxisMaxAcceleration_mm_s2, E3); break;
+ case 15: UI_INCREMENT(AxisMaxAcceleration_mm_s2, E3); break;
+ #endif
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_velocity_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_velocity_screen.cpp
new file mode 100644
index 0000000000..e147bfe4e1
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/max_velocity_screen.cpp
@@ -0,0 +1,87 @@
+/***************************
+ * max_velocity_screen.cpp *
+ ***************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void MaxVelocityScreen::onRedraw(draw_mode_t what) {
+ using namespace ExtUI;
+ widgets_t w(what);
+ w.precision(0);
+ w.units(PSTR("mm/s"));
+ w.heading( PSTR("Maximum Velocity"));
+ w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisMaxFeedrate_mm_s(X) );
+ w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisMaxFeedrate_mm_s(Y) );
+ w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisMaxFeedrate_mm_s(Z) );
+ #if EXTRUDERS == 1 || DISABLED(DISTINCT_E_FACTORS)
+ w.color(e_axis) .adjuster( 8, PSTR("E:"), getAxisMaxFeedrate_mm_s(E0) );
+ #elif EXTRUDERS > 1
+ w.color(e_axis) .adjuster( 8, PSTR("E1:"), getAxisMaxFeedrate_mm_s(E0) );
+ w.color(e_axis) .adjuster( 10, PSTR("E2:"), getAxisMaxFeedrate_mm_s(E1) );
+ #if EXTRUDERS > 2
+ w.color(e_axis).adjuster( 12, PSTR("E3:"), getAxisMaxFeedrate_mm_s(E2) );
+ #endif
+ #if EXTRUDERS > 3
+ w.color(e_axis).adjuster( 14, PSTR("E4:"), getAxisMaxFeedrate_mm_s(E3) );
+ #endif
+ #endif
+ w.increments();
+}
+
+bool MaxVelocityScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(AxisMaxFeedrate_mm_s, X); break;
+ case 3: UI_INCREMENT(AxisMaxFeedrate_mm_s, X); break;
+ case 4: UI_DECREMENT(AxisMaxFeedrate_mm_s, Y); break;
+ case 5: UI_INCREMENT(AxisMaxFeedrate_mm_s, Y); break;
+ case 6: UI_DECREMENT(AxisMaxFeedrate_mm_s, Z); break;
+ case 7: UI_INCREMENT(AxisMaxFeedrate_mm_s, Z); break;
+ case 8: UI_DECREMENT(AxisMaxFeedrate_mm_s, E0); break;
+ case 9: UI_INCREMENT(AxisMaxFeedrate_mm_s, E0); break;
+ #if EXTRUDERS > 1 && ENABLED(DISTINCT_E_FACTORS)
+ case 10: UI_DECREMENT(AxisMaxFeedrate_mm_s, E1); break;
+ case 11: UI_INCREMENT(AxisMaxFeedrate_mm_s, E1); break;
+ #endif
+ #if EXTRUDERS > 2 && ENABLED(DISTINCT_E_FACTORS)
+ case 12: UI_DECREMENT(AxisMaxFeedrate_mm_s, E2); break;
+ case 13: UI_INCREMENT(AxisMaxFeedrate_mm_s, E2); break;
+ #endif
+ #if EXTRUDERS > 3 && ENABLED(DISTINCT_E_FACTORS)
+ case 14: UI_DECREMENT(AxisMaxFeedrate_mm_s, E3); break;
+ case 15: UI_INCREMENT(AxisMaxFeedrate_mm_s, E3); break;
+ #endif
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/media_player_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/media_player_screen.cpp
new file mode 100644
index 0000000000..5db38bec09
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/media_player_screen.cpp
@@ -0,0 +1,169 @@
+/***************************
+ * media_player_screen.cpp *
+ ***************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+/**
+ * The MediaPlayerScreen allows an AVI to be played.
+ *
+ * It requires a special AVI file. The following video
+ * and audio codecs must be used:
+ *
+ * -vcodec mjpeg -pix_fmt yuvj420p
+ * -acodec adpcm_ima_wav
+ *
+ * To generate a 2 second static screen from a png file:
+ *
+ * ffmpeg -i startup.png -vcodec mjpeg -pix_fmt yuvj420p -r 1 video.avi
+ * sox -n -r 44100 -b 8 -c 2 -L silence.wav trim 0.0 2.000
+ * ffmpeg -i silence.wav -acodec adpcm_ima_wav silence.avi
+ * ffmpeg -i video.avi -i silence.wav -c copy -map 0:v:0 -map 1:a:0 startup.avi
+ */
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+#include "../archim2-flash/flash_storage.h"
+#include "../archim2-flash/media_file_reader.h"
+
+using namespace FTDI;
+
+void MediaPlayerScreen::onEntry() {
+ BaseScreen::onEntry();
+ CLCD::turn_on_backlight();
+ SoundPlayer::set_volume(255);
+}
+
+void MediaPlayerScreen::onRedraw(draw_mode_t) {
+}
+
+bool MediaPlayerScreen::playCardMedia() {
+ #if ENABLED(SDSUPPORT)
+ char fname[15];
+ strcpy_P(fname, PSTR("STARTUP.AVI"));
+
+ MediaFileReader reader;
+ if (!reader.open(fname))
+ return false;
+
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Starting to play STARTUP.AVI");
+ playStream(&reader, MediaFileReader::read);
+ reader.close();
+ #endif
+ return true;
+}
+
+// Attempt to play media from the onboard SPI flash chip
+bool MediaPlayerScreen::playBootMedia() {
+ UIFlashStorage::BootMediaReader reader;
+ if (!reader.isAvailable()) return false;
+
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Starting to play boot video");
+ playStream(&reader, UIFlashStorage::BootMediaReader::read);
+ return true;
+}
+
+void MediaPlayerScreen::playStream(void *obj, media_streamer_func_t *data_stream) {
+ #if FTDI_API_LEVEL >= 810
+ if (FTDI::ftdi_chip >= 810) {
+ // Set up the media FIFO on the end of RAMG, as the top of RAMG
+ // will be used as the framebuffer.
+
+ uint8_t buf[512];
+ const uint32_t block_size = 512;
+ const uint32_t fifo_size = block_size * 2;
+ const uint32_t fifo_start = CLCD::MAP::RAM_G + CLCD::MAP::RAM_G_SIZE - fifo_size;
+
+ CommandProcessor cmd;
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(0x000000))
+ .cmd(CLEAR(true,true,true))
+ .cmd(DL::DL_DISPLAY)
+ .cmd(CMD_SWAP)
+ .execute()
+ .cmd(CMD_DLSTART)
+ .mediafifo(fifo_start, fifo_size)
+ .playvideo(OPT_FULLSCREEN | OPT_MEDIAFIFO | OPT_NOTEAR | OPT_SOUND)
+ .cmd(DL::DL_DISPLAY)
+ .cmd(CMD_SWAP)
+ .execute();
+
+ uint32_t writePtr = 0;
+ int16_t nBytes;
+
+ uint32_t t = millis();
+ uint8_t timeouts;
+
+ spiInit(SPI_HALF_SPEED); // Boost SPI speed for video playback
+
+ do {
+ // Write block n
+ nBytes = (*data_stream)(obj, buf, block_size);
+ if (nBytes == -1) break;
+
+ if (millis() - t > 10) {
+ ExtUI::yield();
+ t = millis();
+ }
+
+ CLCD::mem_write_bulk (fifo_start + writePtr, buf, nBytes);
+
+ // Wait for FTDI810 to finish playing block n-1
+ timeouts = 20;
+ do {
+ if (millis() - t > 10) {
+ ExtUI::yield();
+ t = millis();
+ timeouts--;
+ if (timeouts == 0) {
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Timeout playing video");
+ cmd.reset();
+ goto exit;
+ }
+ }
+ } while (CLCD::mem_read_32(CLCD::REG::MEDIAFIFO_READ) != writePtr);
+
+ // Start playing block n
+ writePtr = (writePtr + nBytes) % fifo_size;
+ CLCD::mem_write_32(CLCD::REG::MEDIAFIFO_WRITE, writePtr);
+ } while (nBytes == block_size);
+
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Done playing video");
+
+ exit:
+ spiInit(SPI_SPEED); // Restore default speed
+
+ // Since playing media overwrites RAMG, we need to reinitialize
+ // everything that is stored in RAMG.
+ cmd.cmd(CMD_DLSTART).execute();
+ DLCache::init();
+ StatusScreen::onStartup();
+ }
+ #endif // FTDI_API_LEVEL >= 810
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/move_axis_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/move_axis_screen.cpp
new file mode 100644
index 0000000000..60229907b9
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/move_axis_screen.cpp
@@ -0,0 +1,132 @@
+/************************
+ * move_axis_screen.cpp *
+ ************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+
+void MoveAxisScreen::onEntry() {
+ // Since Marlin keeps only one absolute position for all the extruders,
+ // we have to keep track of the relative motion of individual extruders
+ // ourselves. The relative distances are reset to zero whenever this
+ // screen is entered.
+
+ for(uint8_t i = 0; i < ExtUI::extruderCount; i++) {
+ screen_data.MoveAxisScreen.e_rel[i] = 0;
+ }
+ BaseNumericAdjustmentScreen::onEntry();
+}
+
+void MoveAxisScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(1);
+ w.units(PSTR("mm"));
+ w.heading( PSTR("Move Axis"));
+ w.home_buttons(20);
+ w.color(Theme::x_axis ) .adjuster( 2, PSTR("X:"), getAxisPosition_mm(X), canMove(X));
+ w.color(Theme::y_axis ) .adjuster( 4, PSTR("Y:"), getAxisPosition_mm(Y), canMove(Y));
+ w.color(Theme::z_axis ) .adjuster( 6, PSTR("Z:"), getAxisPosition_mm(Z), canMove(Z));
+
+ #if EXTRUDERS == 1
+ w.color(Theme::e_axis) .adjuster( 8, PSTR("E:"), screen_data.MoveAxisScreen.e_rel[0], canMove(E0));
+ #elif EXTRUDERS > 1
+ w.color(Theme::e_axis) .adjuster( 8, PSTR("E1:"), screen_data.MoveAxisScreen.e_rel[0], canMove(E0));
+ w.color(Theme::e_axis) .adjuster( 10, PSTR("E2:"), screen_data.MoveAxisScreen.e_rel[1], canMove(E1));
+ #if EXTRUDERS > 2
+ w.color(Theme::e_axis) .adjuster( 12, PSTR("E3:"), screen_data.MoveAxisScreen.e_rel[2], canMove(E2));
+ #endif
+ #if EXTRUDERS > 3
+ w.color(Theme::e_axis) .adjuster( 14, PSTR("E4:"), screen_data.MoveAxisScreen.e_rel[3], canMove(E3));
+ #endif
+ #endif
+ w.increments();
+}
+
+bool MoveAxisScreen::onTouchHeld(uint8_t tag) {
+ #define UI_INCREMENT_AXIS(axis) setManualFeedrate(axis, increment); UI_INCREMENT(AxisPosition_mm, axis);
+ #define UI_DECREMENT_AXIS(axis) setManualFeedrate(axis, increment); UI_DECREMENT(AxisPosition_mm, axis);
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT_AXIS(X); break;
+ case 3: UI_INCREMENT_AXIS(X); break;
+ case 4: UI_DECREMENT_AXIS(Y); break;
+ case 5: UI_INCREMENT_AXIS(Y); break;
+ case 6: UI_DECREMENT_AXIS(Z); break;
+ case 7: UI_INCREMENT_AXIS(Z); break;
+ // For extruders, also update relative distances.
+ case 8: UI_DECREMENT_AXIS(E0); screen_data.MoveAxisScreen.e_rel[0] -= increment; break;
+ case 9: UI_INCREMENT_AXIS(E0); screen_data.MoveAxisScreen.e_rel[0] += increment; break;
+ #if EXTRUDERS > 1
+ case 10: UI_DECREMENT_AXIS(E1); screen_data.MoveAxisScreen.e_rel[1] -= increment; break;
+ case 11: UI_INCREMENT_AXIS(E1); screen_data.MoveAxisScreen.e_rel[1] += increment; break;
+ #endif
+ #if EXTRUDERS > 2
+ case 12: UI_DECREMENT_AXIS(E2); screen_data.MoveAxisScreen.e_rel[2] -= increment; break;
+ case 13: UI_INCREMENT_AXIS(E2); screen_data.MoveAxisScreen.e_rel[2] += increment; break;
+ #endif
+ #if EXTRUDERS > 3
+ case 14: UI_DECREMENT_AXIS(E3); screen_data.MoveAxisScreen.e_rel[3] -= increment; break;
+ case 15: UI_INCREMENT_AXIS(E3); screen_data.MoveAxisScreen.e_rel[3] += increment; break;
+ #endif
+ case 20: injectCommands_P(PSTR("G28 X")); break;
+ case 21: injectCommands_P(PSTR("G28 Y")); break;
+ case 22: injectCommands_P(PSTR("G28 Z")); break;
+ case 23: injectCommands_P(PSTR("G28")); break;
+ default:
+ return false;
+ }
+ #undef UI_DECREMENT_AXIS
+ #undef UI_INCREMENT_AXIS
+ return true;
+}
+
+float MoveAxisScreen::getManualFeedrate(uint8_t axis, float increment_mm) {
+ // Compute feedrate so that the tool lags the adjuster when it is
+ // being held down, this allows enough margin for the planner to
+ // connect segments and even out the motion.
+ constexpr float max_manual_feedrate[XYZE] = MAX_MANUAL_FEEDRATE;
+ return min(max_manual_feedrate[axis]/60, abs(increment_mm * TOUCH_REPEATS_PER_SECOND * 0.80));
+}
+
+void MoveAxisScreen::setManualFeedrate(ExtUI::axis_t axis, float increment_mm) {
+ ExtUI::setFeedrate_mm_s(getManualFeedrate(X_AXIS + (axis - ExtUI::X), increment_mm));
+}
+
+void MoveAxisScreen::setManualFeedrate(ExtUI::extruder_t, float increment_mm) {
+ ExtUI::setFeedrate_mm_s(getManualFeedrate(E_AXIS, increment_mm));
+}
+
+void MoveAxisScreen::onIdle() {
+ if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) {
+ onRefresh();
+ refresh_timer.start();
+ }
+ BaseScreen::onIdle();
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nozzle_offsets_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nozzle_offsets_screen.cpp
new file mode 100644
index 0000000000..558c1acfce
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nozzle_offsets_screen.cpp
@@ -0,0 +1,73 @@
+/*****************************
+ * nozzle_offsets_screen.cpp *
+ *****************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && HOTENDS > 1
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+
+void NozzleOffsetScreen::onEntry() {
+ // Since we don't allow the user to edit the offsets for E0,
+ // make sure they are all zero.
+ normalizeNozzleOffset(X);
+ normalizeNozzleOffset(Y);
+ normalizeNozzleOffset(Z);
+}
+
+void NozzleOffsetScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(2).units(PSTR("mm"));
+
+ w.heading( PSTR("Nozzle Offset"));
+ w.color(Theme::x_axis).adjuster(2, PSTR("X:"), ExtUI::getNozzleOffset_mm(X, E1));
+ w.color(Theme::y_axis).adjuster(4, PSTR("Y:"), ExtUI::getNozzleOffset_mm(Y, E1));
+ w.color(Theme::z_axis).adjuster(6, PSTR("Z:"), ExtUI::getNozzleOffset_mm(Z, E1));
+ #if ENABLED(CALIBRATION_GCODE)
+ w.button(8, PSTR("Measure automatically"), !isPrinting());
+ #endif
+ w.increments();
+}
+
+bool NozzleOffsetScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(NozzleOffset_mm, X, E1); break;
+ case 3: UI_INCREMENT(NozzleOffset_mm, X, E1); break;
+ case 4: UI_DECREMENT(NozzleOffset_mm, Y, E1); break;
+ case 5: UI_INCREMENT(NozzleOffset_mm, Y, E1); break;
+ case 6: UI_DECREMENT(NozzleOffset_mm, Z, E1); break;
+ case 7: UI_INCREMENT(NozzleOffset_mm, Z, E1); break;
+ #if ENABLED(CALIBRATION_GCODE)
+ case 8: GOTO_SCREEN(ConfirmAutoCalibrationDialogBox); return true;
+ #endif
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
new file mode 100644
index 0000000000..99badde0b4
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/nudge_nozzle_screen.cpp
@@ -0,0 +1,128 @@
+/********************
+ * nudge_nozzle.cpp *
+ ********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(BABYSTEPPING)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+void NudgeNozzleScreen::onEntry() {
+ screen_data.NudgeNozzleScreen.show_offsets = false;
+ #if EXTRUDERS > 1
+ screen_data.NudgeNozzleScreen.link_nozzles = true;
+ #endif
+ LOOP_XYZ(i) {
+ screen_data.NudgeNozzleScreen.rel[i] = 0;
+ }
+ BaseNumericAdjustmentScreen::onEntry();
+}
+
+void NudgeNozzleScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(PSTR("mm"));
+
+ w.heading( PSTR("Nudge Nozzle"));
+ #if ENABLED(BABYSTEP_XY)
+ w.color(x_axis).adjuster(2, PSTR("X:"), screen_data.NudgeNozzleScreen.rel[0] / getAxisSteps_per_mm(X));
+ w.color(y_axis).adjuster(4, PSTR("Y:"), screen_data.NudgeNozzleScreen.rel[1] / getAxisSteps_per_mm(Y));
+ #endif
+ w.color(z_axis).adjuster(6, PSTR("Z:"), screen_data.NudgeNozzleScreen.rel[2] / getAxisSteps_per_mm(Z));
+ w.increments();
+ #if EXTRUDERS > 1
+ w.toggle (8, PSTR("Adjust Both Nozzles:"), PSTR("no\xFFyes"), screen_data.NudgeNozzleScreen.link_nozzles, PSTR("Yes\nNo"));
+ #endif
+
+ #if EXTRUDERS > 1 || HAS_BED_PROBE
+ w.toggle (9, PSTR("Show Offsets:"), PSTR("no\xFFyes"), screen_data.NudgeNozzleScreen.show_offsets, PSTR("Yes\nNo"));
+
+ if (screen_data.NudgeNozzleScreen.show_offsets) {
+ char str[19], num1[7];
+
+ w.draw_mode(BOTH);
+ w.color(other);
+
+ #if HAS_BED_PROBE
+ dtostrf(getZOffset_mm(), 4, 2, num1);
+ sprintf_P(str, PSTR("%s mm"), num1);
+ w.text_field (0, PSTR("Z Offset"), str);
+ #endif
+
+ #if EXTRUDERS > 1
+ char num2[7], num3[7];
+ dtostrf(getNozzleOffset_mm(X, E1), 4, 2, num1);
+ dtostrf(getNozzleOffset_mm(Y, E1), 4, 2, num2);
+ dtostrf(getNozzleOffset_mm(Z, E1), 4, 2, num3);
+ sprintf_P(str, PSTR("%s; %s; %s mm"), num1, num2, num3);
+ w.text_field (0, PSTR("Noz. Offset"), str);
+ #endif
+ }
+ #endif
+}
+
+bool NudgeNozzleScreen::onTouchHeld(uint8_t tag) {
+ const float inc = getIncrement();
+ #if EXTRUDERS > 1
+ const bool link = screen_data.NudgeNozzleScreen.link_nozzles;
+ #else
+ constexpr bool link = true;
+ #endif
+ int16_t steps;
+ switch (tag) {
+ case 2: steps = mmToWholeSteps(inc, X); smartAdjustAxis_steps(-steps, X, link); screen_data.NudgeNozzleScreen.rel[0] -= steps; break;
+ case 3: steps = mmToWholeSteps(inc, X); smartAdjustAxis_steps( steps, X, link); screen_data.NudgeNozzleScreen.rel[0] += steps; break;
+ case 4: steps = mmToWholeSteps(inc, Y); smartAdjustAxis_steps(-steps, Y, link); screen_data.NudgeNozzleScreen.rel[1] -= steps; break;
+ case 5: steps = mmToWholeSteps(inc, Y); smartAdjustAxis_steps( steps, Y, link); screen_data.NudgeNozzleScreen.rel[1] += steps; break;
+ case 6: steps = mmToWholeSteps(inc, Z); smartAdjustAxis_steps(-steps, Z, link); screen_data.NudgeNozzleScreen.rel[2] -= steps; break;
+ case 7: steps = mmToWholeSteps(inc, Z); smartAdjustAxis_steps( steps, Z, link); screen_data.NudgeNozzleScreen.rel[2] += steps; break;
+ #if EXTRUDERS > 1
+ case 8: screen_data.NudgeNozzleScreen.link_nozzles = !link; break;
+ #endif
+ case 9: screen_data.NudgeNozzleScreen.show_offsets = !screen_data.NudgeNozzleScreen.show_offsets; break;
+ default:
+ return false;
+ }
+ #if EXTRUDERS > 1 || HAS_BED_PROBE
+ SaveSettingsDialogBox::settingsChanged();
+ #endif
+ return true;
+}
+
+bool NudgeNozzleScreen::onTouchEnd(uint8_t tag) {
+ if (tag == 1) {
+ SaveSettingsDialogBox::promptToSaveSettings();
+ return true;
+ } else {
+ return BaseNumericAdjustmentScreen::onTouchEnd(tag);
+ }
+}
+
+void NudgeNozzleScreen::onIdle() {
+ reset_menu_timeout();
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/restore_failsafe_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/restore_failsafe_dialog_box.cpp
new file mode 100644
index 0000000000..a93727cd8d
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/restore_failsafe_dialog_box.cpp
@@ -0,0 +1,51 @@
+/***********************************
+ * restore_failsafe_dialog_box.cpp *
+ ***********************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace ExtUI;
+
+void RestoreFailsafeDialogBox::onRedraw(draw_mode_t) {
+ drawMessage(F("Are you sure? Customizations will be lost."));
+ drawYesNoButtons();
+}
+
+bool RestoreFailsafeDialogBox::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1:
+ ExtUI::injectCommands_P(PSTR("M502\nM117 Factory settings restored."));
+ AlertDialogBox::show(F("Factory settings restored."));
+ // Remove RestoreFailsafeDialogBox from the stack
+ // so the alert box doesn't return to it.
+ current_screen.forget();
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/save_settings_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/save_settings_dialog_box.cpp
new file mode 100644
index 0000000000..8a58af119c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/save_settings_dialog_box.cpp
@@ -0,0 +1,65 @@
+/********************************
+ * save_settings_dialog_box.cpp *
+ ********************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace ExtUI;
+
+bool SaveSettingsDialogBox::needs_save = false;
+
+void SaveSettingsDialogBox::onRedraw(draw_mode_t) {
+ drawMessage(F("Do you wish to save these settings as defaults?"));
+ drawYesNoButtons();
+}
+
+bool SaveSettingsDialogBox::onTouchEnd(uint8_t tag) {
+ needs_save = false;
+ switch (tag) {
+ case 1:
+ injectCommands_P(PSTR("M500"));
+ AlertDialogBox::show(F("Settings saved!"));
+ // Remove SaveSettingsDialogBox from the stack
+ // so the alert box doesn't return to me.
+ current_screen.forget();
+ return true;
+ default:
+ return DialogBoxBaseClass::onTouchEnd(tag);
+ }
+}
+
+void SaveSettingsDialogBox::promptToSaveSettings() {
+ if (needs_save) {
+ // Remove current screen from the stack
+ // so SaveSettingsDialogBox doesn't return here.
+ GOTO_SCREEN(SaveSettingsDialogBox);
+ current_screen.forget();
+ } else {
+ // No save needed.
+ GOTO_PREVIOUS();
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screen_data.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screen_data.h
new file mode 100644
index 0000000000..ed50a8bc3f
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screen_data.h
@@ -0,0 +1,77 @@
+/*****************
+ * screen_data.h *
+ *****************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "../ftdi_eve_lib/ftdi_eve_lib.h"
+
+// To save RAM, store state information related to a particular screen
+// in a union. The values should be initialized in the onEntry method.
+
+struct base_numeric_adjustment_t {uint8_t increment;};
+
+union screen_data_t {
+ struct base_numeric_adjustment_t BaseNumericAdjustmentScreen;
+ struct {uint8_t volume; uint8_t brightness;} InterfaceSettingsScreen;
+ struct {char passcode[5];} LockScreen;
+ struct {bool isError;} AlertDialogBox;
+ struct {bool auto_hide;} SpinnerDialogBox;
+ struct {
+ uint8_t e_tag, t_tag, repeat_tag;
+ ExtUI::extruder_t saved_extruder;
+ } ChangeFilamentScreen;
+ struct {
+ struct {
+ uint8_t is_dir : 1;
+ uint8_t is_root : 1;
+ } flags;
+ uint8_t selected_tag;
+ uint8_t num_page;
+ uint8_t cur_page;
+ #if ENABLED(SCROLL_LONG_FILENAMES) && (FTDI_API_LEVEL >= 810)
+ uint16_t scroll_pos;
+ uint16_t scroll_max;
+ #endif
+ } FilesScreen;
+ struct {
+ struct base_numeric_adjustment_t placeholder;
+ float e_rel[ExtUI::extruderCount];
+ } MoveAxisScreen;
+#if ENABLED(DEVELOPER_SCREENS)
+ struct {
+ uint32_t next_watchdog_trigger;
+ const char* message;
+ } StressTestScreen;
+#endif
+#if ENABLED(BABYSTEPPING)
+ struct {
+ struct base_numeric_adjustment_t placeholder;
+ int16_t rel[XYZ];
+ #if EXTRUDERS > 1
+ bool link_nozzles;
+ #endif
+ bool show_offsets;
+ } NudgeNozzleScreen;
+#endif
+};
+
+extern screen_data_t screen_data;
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp
new file mode 100644
index 0000000000..fa53a0130b
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.cpp
@@ -0,0 +1,113 @@
+/***************
+ * screens.cpp *
+ ***************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+#include "screens.h"
+#include "screen_data.h"
+
+tiny_timer_t refresh_timer;
+screen_data_t screen_data;
+
+SCREEN_TABLE {
+ DECL_SCREEN(BootScreen),
+ DECL_SCREEN(TouchCalibrationScreen),
+ DECL_SCREEN(StatusScreen),
+ DECL_SCREEN(MainMenu),
+ DECL_SCREEN(TuneMenu),
+ DECL_SCREEN(AdvancedSettingsMenu),
+ DECL_SCREEN(AlertDialogBox),
+ DECL_SCREEN(ConfirmUserRequestAlertBox),
+ DECL_SCREEN(RestoreFailsafeDialogBox),
+ DECL_SCREEN(SaveSettingsDialogBox),
+ DECL_SCREEN(ConfirmAbortPrintDialogBox),
+#if ENABLED(CALIBRATION_GCODE)
+ DECL_SCREEN(ConfirmAutoCalibrationDialogBox),
+#endif
+ DECL_SCREEN(SpinnerDialogBox),
+ DECL_SCREEN(AboutScreen),
+#if ENABLED(PRINTCOUNTER)
+ DECL_SCREEN(StatisticsScreen),
+#endif
+#if ENABLED(BABYSTEPPING)
+ DECL_SCREEN(NudgeNozzleScreen),
+#endif
+ DECL_SCREEN(MoveAxisScreen),
+ DECL_SCREEN(StepsScreen),
+#if HAS_TRINAMIC
+ DECL_SCREEN(StepperCurrentScreen),
+ DECL_SCREEN(StepperBumpSensitivityScreen),
+#endif
+#if HAS_BED_PROBE
+ DECL_SCREEN(ZOffsetScreen),
+#endif
+#if HOTENDS > 1
+ DECL_SCREEN(NozzleOffsetScreen),
+#endif
+#if ENABLED(BACKLASH_GCODE)
+ DECL_SCREEN(BacklashCompensationScreen),
+#endif
+ DECL_SCREEN(FeedratePercentScreen),
+ DECL_SCREEN(MaxVelocityScreen),
+ DECL_SCREEN(MaxAccelerationScreen),
+ DECL_SCREEN(DefaultAccelerationScreen),
+#if ENABLED(JUNCTION_DEVIATION)
+ DECL_SCREEN(JunctionDeviationScreen),
+#else
+ DECL_SCREEN(JerkScreen),
+#endif
+#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ DECL_SCREEN(FilamentMenu),
+#endif
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ DECL_SCREEN(FilamentRunoutScreen),
+#endif
+#if ENABLED(LIN_ADVANCE)
+ DECL_SCREEN(LinearAdvanceScreen),
+#endif
+ DECL_SCREEN(TemperatureScreen),
+ DECL_SCREEN(ChangeFilamentScreen),
+ DECL_SCREEN(InterfaceSettingsScreen),
+ DECL_SCREEN(InterfaceSoundsScreen),
+ DECL_SCREEN(LockScreen),
+ DECL_SCREEN(FilesScreen),
+ DECL_SCREEN(EndstopStatesScreen),
+#ifdef LULZBOT_USE_BIOPRINTER_UI
+ DECL_SCREEN(BioPrintingDialogBox),
+ DECL_SCREEN(BioConfirmHomeXYZ),
+ DECL_SCREEN(BioConfirmHomeE),
+#endif
+#if ENABLED(DEVELOPER_SCREENS)
+ DECL_SCREEN(DeveloperMenu),
+ DECL_SCREEN(ConfirmEraseFlashDialogBox),
+ DECL_SCREEN(WidgetsScreen),
+ DECL_SCREEN(TouchRegistersScreen),
+ DECL_SCREEN(StressTestScreen),
+#endif
+ DECL_SCREEN(MediaPlayerScreen),
+ DECL_SCREEN(DisplayTuningScreen)
+};
+
+SCREEN_TABLE_POST
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
new file mode 100644
index 0000000000..d8c48de9ed
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/screens.h
@@ -0,0 +1,712 @@
+/*************
+ * screens.h *
+ *************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "../ftdi_eve_lib/ftdi_eve_lib.h"
+#include "../theme/theme.h"
+
+#define ROUND(val) uint16_t((val)+0.5)
+
+extern tiny_timer_t refresh_timer;
+
+/********************************* DL CACHE SLOTS ******************************/
+
+// In order to reduce SPI traffic, we cache display lists (DL) in RAMG. This
+// is done using the CLCD::DLCache class, which takes a unique ID for each
+// cache location. These IDs are defined here:
+
+enum {
+ STATUS_SCREEN_CACHE,
+ MENU_SCREEN_CACHE,
+ TUNE_SCREEN_CACHE,
+ ADJUST_OFFSETS_SCREEN_CACHE,
+ ALERT_BOX_CACHE,
+ SPINNER_CACHE,
+ ADVANCED_SETTINGS_SCREEN_CACHE,
+ MOVE_AXIS_SCREEN_CACHE,
+ TEMPERATURE_SCREEN_CACHE,
+ STEPS_SCREEN_CACHE,
+ STEPPER_CURRENT_SCREEN_CACHE,
+ STEPPER_BUMP_SENSITIVITY_SCREEN_CACHE,
+ ZOFFSET_SCREEN_CACHE,
+ NOZZLE_OFFSET_SCREEN_CACHE,
+ BACKLASH_COMPENSATION_SCREEN_CACHE,
+ MAX_FEEDRATE_SCREEN_CACHE,
+ MAX_VELOCITY_SCREEN_CACHE,
+ MAX_ACCELERATION_SCREEN_CACHE,
+ DEFAULT_ACCELERATION_SCREEN_CACHE,
+#if ENABLED(JUNCTION_DEVIATION)
+ JUNC_DEV_SCREEN_CACHE,
+#else
+ JERK_SCREEN_CACHE,
+#endif
+#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ FILAMENT_MENU_CACHE,
+#endif
+#if ENABLED(LIN_ADVANCE)
+ LINEAR_ADVANCE_SCREEN_CACHE,
+#endif
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ FILAMENT_RUNOUT_SCREEN_CACHE,
+#endif
+#ifdef LULZBOT_USE_BIOPRINTER_UI
+ PRINTING_SCREEN_CACHE,
+#endif
+ CHANGE_FILAMENT_SCREEN_CACHE,
+ INTERFACE_SETTINGS_SCREEN_CACHE,
+ INTERFACE_SOUNDS_SCREEN_CACHE,
+ LOCK_SCREEN_CACHE,
+ FILES_SCREEN_CACHE,
+ DISPLAY_TIMINGS_SCREEN_CACHE
+};
+
+// To save MCU RAM, the status message is "baked" in to the status screen
+// cache, so we reserve a large chunk of memory for the DL cache
+
+#define STATUS_SCREEN_DL_SIZE 2048
+#define ALERT_BOX_DL_SIZE 3072
+#define SPINNER_DL_SIZE 3072
+#define FILE_SCREEN_DL_SIZE 3072
+#define PRINTING_SCREEN_DL_SIZE 2048
+
+/************************* MENU SCREEN DECLARATIONS *************************/
+
+class BaseScreen : public UIScreen {
+ protected:
+ #ifdef LCD_TIMEOUT_TO_STATUS
+ static uint32_t last_interaction;
+ #endif
+
+ public:
+ static bool buttonStyleCallback(CommandProcessor &, uint8_t, uint8_t &, uint16_t &, bool);
+
+ static void reset_menu_timeout();
+
+ static void onEntry();
+ static void onIdle();
+};
+
+class BootScreen : public BaseScreen, public UncachedScreen {
+ private:
+ static void showSplashScreen();
+ public:
+ static void onRedraw(draw_mode_t);
+ static void onIdle();
+};
+
+class AboutScreen : public BaseScreen, public UncachedScreen {
+ public:
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+#if ENABLED(PRINTCOUNTER)
+ class StatisticsScreen : public BaseScreen, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ };
+#endif
+
+class KillScreen {
+ // The KillScreen is behaves differently than the
+ // others, so we do not bother extending UIScreen.
+ public:
+ static void show(progmem_str msg);
+};
+
+class DialogBoxBaseClass : public BaseScreen {
+ protected:
+ template static void drawMessage(const T, int16_t font = 0);
+ static void drawYesNoButtons(uint8_t default_btn = 0);
+ static void drawOkayButton();
+ static void drawSpinner();
+ static void drawButton(const progmem_str);
+
+ static void onRedraw(draw_mode_t) {};
+ public:
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class AlertDialogBox : public DialogBoxBaseClass, public CachedScreen {
+ public:
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ template static void show(T);
+ template static void showError(T);
+ static void hide();
+};
+
+class RestoreFailsafeDialogBox : public DialogBoxBaseClass, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class SaveSettingsDialogBox : public DialogBoxBaseClass, public UncachedScreen {
+ private:
+ static bool needs_save;
+
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+
+ static void promptToSaveSettings();
+ static void settingsChanged() {needs_save = true;}
+};
+
+class ConfirmAbortPrintDialogBox : public DialogBoxBaseClass, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+#if ENABLED(CALIBRATION_GCODE)
+class ConfirmAutoCalibrationDialogBox : public DialogBoxBaseClass, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+#endif
+
+class ConfirmUserRequestAlertBox : public AlertDialogBox {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t);
+ static void hide();
+ static void show(const char*);
+};
+
+class SpinnerDialogBox : public DialogBoxBaseClass, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static void onIdle();
+
+ static void show(const progmem_str);
+ static void hide();
+ static void enqueueAndWait_P(const progmem_str commands);
+ static void enqueueAndWait_P(const progmem_str message, const progmem_str commands);
+};
+
+#if !defined(LULZBOT_USE_BIOPRINTER_UI)
+class StatusScreen : public BaseScreen, public CachedScreen {
+ private:
+ static void draw_axis_position(draw_mode_t);
+ static void draw_temperature(draw_mode_t);
+ static void draw_progress(draw_mode_t);
+ static void draw_interaction_buttons(draw_mode_t);
+ static void draw_status_message(draw_mode_t, const char * const);
+
+ public:
+ static void setStatusMessage(const char *);
+ static void setStatusMessage(progmem_str);
+ static void onRedraw(draw_mode_t);
+ static void onStartup();
+ static void onEntry();
+ static void onIdle();
+ static bool onTouchEnd(uint8_t tag);
+};
+#else
+ class StatusScreen : public BaseScreen, public CachedScreen {
+ private:
+ static float increment;
+ static bool jog_xy;
+ static bool fine_motion;
+
+ static void draw_temperature(draw_mode_t what);
+ static void draw_syringe(draw_mode_t what);
+ static void draw_arrows(draw_mode_t what);
+ static void draw_overlay_icons(draw_mode_t what);
+ static void draw_fine_motion(draw_mode_t what);
+ static void draw_buttons(draw_mode_t what);
+ public:
+ static void unlockMotors();
+
+ static void setStatusMessage(const char *);
+ static void setStatusMessage(progmem_str);
+
+ static void onStartup();
+ static void onRedraw(draw_mode_t);
+
+ static bool onTouchStart(uint8_t tag);
+ static bool onTouchHeld(uint8_t tag);
+ static bool onTouchEnd(uint8_t tag);
+ static void onIdle();
+
+ };
+
+ class BioPrintingDialogBox : public BaseScreen, public CachedScreen {
+ private:
+ static void draw_status_message(draw_mode_t, const char * const);
+ static void draw_progress(draw_mode_t);
+ static void draw_time_remaining(draw_mode_t);
+ static void draw_interaction_buttons(draw_mode_t);
+ public:
+ static void onRedraw(draw_mode_t);
+
+ static void show();
+
+ static void setStatusMessage(const char *);
+ static void setStatusMessage(progmem_str);
+
+ static void onIdle();
+ static bool onTouchEnd(uint8_t tag);
+ };
+
+ class BioConfirmHomeXYZ : public DialogBoxBaseClass, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ };
+
+ class BioConfirmHomeE : public DialogBoxBaseClass, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ };
+#endif
+
+class MainMenu : public BaseScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class TuneMenu : public BaseScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class TouchCalibrationScreen : public BaseScreen, public UncachedScreen {
+ public:
+ static void onRefresh();
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static void onIdle();
+};
+
+class TouchRegistersScreen : public BaseScreen, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class AdvancedSettingsMenu : public BaseScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class ChangeFilamentScreen : public BaseScreen, public CachedScreen {
+ private:
+ static uint8_t getSoftenTemp();
+ static ExtUI::extruder_t getExtruder();
+ static void drawTempGradient(uint16_t x, uint16_t y, uint16_t w, uint16_t h);
+ static uint32_t getTempColor(uint32_t temp);
+ public:
+ static void onEntry();
+ static void onExit();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchStart(uint8_t tag);
+ static bool onTouchEnd(uint8_t tag);
+ static bool onTouchHeld(uint8_t tag);
+ static void onIdle();
+};
+
+class BaseNumericAdjustmentScreen : public BaseScreen {
+ public:
+ enum precision_default_t {
+ DEFAULT_LOWEST,
+ DEFAULT_MIDRANGE,
+ DEFAULT_HIGHEST
+ };
+
+ protected:
+ class widgets_t {
+ private:
+ draw_mode_t _what;
+ uint8_t _line;
+ uint32_t _color;
+ uint8_t _decimals;
+ const char *_units;
+
+ protected:
+ void _draw_increment_btn(uint8_t line, const uint8_t tag);
+
+ public:
+ widgets_t(draw_mode_t);
+
+ widgets_t &color(uint32_t color) {_color = color; return *this;}
+ widgets_t &units(const char *units) {_units = units; return *this;}
+ widgets_t &draw_mode(draw_mode_t what) {_what = what; return *this;}
+ widgets_t &precision(uint8_t decimals, precision_default_t = DEFAULT_HIGHEST);
+
+ void heading (const char *label);
+ void adjuster_sram_val (uint8_t tag, const char *label, const char *value, bool is_enabled = true);
+ void adjuster (uint8_t tag, const char *label, const char *value, bool is_enabled = true);
+ void adjuster (uint8_t tag, const char *label, float value=0, bool is_enabled = true);
+ void button (uint8_t tag, const char *label, bool is_enabled = true);
+ void text_field (uint8_t tag, const char *label, const char *value, bool is_enabled = true);
+ void two_buttons (uint8_t tag1, const char *label1,
+ uint8_t tag2, const char *label2, bool is_enabled = true);
+ void toggle (uint8_t tag, const char *label, const char *text, bool value, bool is_enabled = true);
+ void home_buttons (uint8_t tag);
+ void increments ();
+ };
+
+ static float getIncrement();
+
+ public:
+ static void onEntry();
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class MoveAxisScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ private:
+ static float getManualFeedrate(uint8_t axis, float increment_mm);
+ public:
+ static void setManualFeedrate(ExtUI::axis_t, float increment_mm);
+ static void setManualFeedrate(ExtUI::extruder_t, float increment_mm);
+
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ static void onIdle();
+};
+
+class StepsScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+#if HAS_TRINAMIC
+ class StepperCurrentScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+
+ class StepperBumpSensitivityScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+#if HAS_BED_PROBE
+ class ZOffsetScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+#if HOTENDS > 1
+ class NozzleOffsetScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+#if ENABLED(BABYSTEPPING)
+ class NudgeNozzleScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ static bool onTouchHeld(uint8_t tag);
+ static void onIdle();
+ };
+#endif
+
+#if ENABLED(BACKLASH_GCODE)
+ class BacklashCompensationScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+class FeedratePercentScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+class MaxVelocityScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+class MaxAccelerationScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+class DefaultAccelerationScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+#if ENABLED(JUNCTION_DEVIATION)
+ class JunctionDeviationScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#else
+ class JerkScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+#if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ class FilamentMenu : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ };
+#endif
+
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ class FilamentRunoutScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+#if ENABLED(LIN_ADVANCE)
+ class LinearAdvanceScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+ };
+#endif
+
+class TemperatureScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+class InterfaceSoundsScreen : public BaseScreen, public CachedScreen {
+ public:
+ enum event_t {
+ PRINTING_STARTED = 0,
+ PRINTING_FINISHED = 1,
+ PRINTING_FAILED = 2,
+
+ NUM_EVENTS
+ };
+
+ private:
+ friend class InterfaceSettingsScreen;
+
+ static uint8_t event_sounds[NUM_EVENTS];
+
+ static const char* getSoundSelection(event_t);
+ static void toggleSoundSelection(event_t);
+ static void setSoundSelection(event_t, const FTDI::SoundPlayer::sound_t*);
+
+ public:
+ static void playEventSound(event_t, FTDI::play_mode_t = FTDI::PLAY_ASYNCHRONOUS);
+
+ static void defaultSettings();
+
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchStart(uint8_t tag);
+ static bool onTouchEnd(uint8_t tag);
+ static void onIdle();
+};
+
+class InterfaceSettingsScreen : public BaseScreen, public CachedScreen {
+ private:
+ struct persistent_data_t {
+ uint32_t touch_transform_a;
+ uint32_t touch_transform_b;
+ uint32_t touch_transform_c;
+ uint32_t touch_transform_d;
+ uint32_t touch_transform_e;
+ uint32_t touch_transform_f;
+ uint16_t passcode;
+ uint8_t display_brightness;
+ int8_t display_h_offset_adj;
+ int8_t display_v_offset_adj;
+ uint8_t sound_volume;
+ uint8_t bit_flags;
+ uint8_t event_sounds[InterfaceSoundsScreen::NUM_EVENTS];
+ };
+
+ public:
+ #ifdef LULZBOT_EEPROM_BACKUP_SIZE
+ static bool backupEEPROM();
+ #endif
+
+ static void saveSettings(char *);
+ static void loadSettings(const char *);
+ static void defaultSettings();
+ static void failSafeSettings();
+
+ static void onStartup();
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchStart(uint8_t tag);
+ static bool onTouchEnd(uint8_t tag);
+ static void onIdle();
+};
+
+class LockScreen : public BaseScreen, public CachedScreen {
+ private:
+ friend InterfaceSettingsScreen;
+
+ static uint16_t passcode;
+
+ static char & message_style();
+ static uint16_t compute_checksum();
+ static void onPasscodeEntered();
+ public:
+ static bool is_enabled();
+ static void check_passcode();
+ static void enable();
+ static void disable();
+
+ static void set_hash(uint16_t pass) {passcode = pass;};
+ static uint16_t get_hash() {return passcode;};
+
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+};
+
+class FilesScreen : public BaseScreen, public CachedScreen {
+ private:
+ #ifdef TOUCH_UI_PORTRAIT
+ static constexpr uint8_t header_h = 2;
+ static constexpr uint8_t footer_h = 2;
+ static constexpr uint8_t files_per_page = 11;
+ #else
+ static constexpr uint8_t header_h = 1;
+ static constexpr uint8_t footer_h = 1;
+ static constexpr uint8_t files_per_page = 6;
+ #endif
+
+ static uint8_t getTagForLine(uint8_t line) {return line + 2;}
+ static uint8_t getLineForTag(uint8_t tag) {return tag - 2;}
+ static uint16_t getFileForTag(uint8_t tag);
+
+ static const char *getSelectedShortFilename();
+ static const char *getSelectedLongFilename();
+
+ static void drawFileButton(const char* filename, uint8_t tag, bool is_dir, bool is_highlighted);
+ static void drawFileList();
+ static void drawHeader();
+ static void drawFooter();
+ static void drawSelectedFile();
+
+ static void gotoPage(uint8_t);
+ public:
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ static void onIdle();
+};
+
+class EndstopStatesScreen : public BaseScreen, public UncachedScreen {
+ public:
+ static void onEntry();
+ static void onExit();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ static void onIdle();
+};
+
+class DisplayTuningScreen : public BaseNumericAdjustmentScreen, public CachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchHeld(uint8_t tag);
+};
+
+#if ENABLED(DEVELOPER_SCREENS)
+ class DeveloperMenu : public BaseScreen, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ };
+
+ class ConfirmEraseFlashDialogBox : public DialogBoxBaseClass, public UncachedScreen {
+ public:
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ };
+
+ class WidgetsScreen : public BaseScreen, public UncachedScreen {
+ public:
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchStart(uint8_t tag);
+ static void onIdle();
+ };
+
+ class StressTestScreen : public BaseScreen, public UncachedScreen {
+ private:
+ static void drawDots(uint16_t x, uint16_t y, uint16_t h, uint16_t v);
+ static bool watchDogTestNow();
+ static void recursiveLockup();
+ static void iterativeLockup();
+ static void runTestOnBootup(bool enable);
+
+ public:
+ static void startupCheck();
+
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+ static bool onTouchEnd(uint8_t tag);
+ static void onIdle();
+ };
+#endif
+
+class MediaPlayerScreen : public BaseScreen, public UncachedScreen {
+ private:
+ typedef int16_t media_streamer_func_t(void *obj, void *buff, size_t bytes);
+
+ public:
+ static bool playCardMedia();
+ static bool playBootMedia();
+
+ static void onEntry();
+ static void onRedraw(draw_mode_t);
+
+ static void playStream(void *obj, media_streamer_func_t*);
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/spinner_dialog_box.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/spinner_dialog_box.cpp
new file mode 100644
index 0000000000..971bd5e5ba
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/spinner_dialog_box.cpp
@@ -0,0 +1,67 @@
+/**************************
+ * spinner_dialog_box.cpp *
+ **************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+
+void SpinnerDialogBox::onRedraw(draw_mode_t) {
+}
+
+void SpinnerDialogBox::show(const progmem_str message) {
+ drawMessage(message);
+ drawSpinner();
+ storeBackground();
+ screen_data.SpinnerDialogBox.auto_hide = false;
+}
+
+void SpinnerDialogBox::hide() {
+ CommandProcessor cmd;
+ cmd.stop().execute();
+}
+
+void SpinnerDialogBox::enqueueAndWait_P(const progmem_str commands) {
+ enqueueAndWait_P(F("Please wait..."), commands);
+}
+
+void SpinnerDialogBox::enqueueAndWait_P(const progmem_str message, const progmem_str commands) {
+ show(message);
+ GOTO_SCREEN(SpinnerDialogBox);
+ ExtUI::injectCommands_P((const char*)commands);
+ screen_data.SpinnerDialogBox.auto_hide = true;
+}
+
+void SpinnerDialogBox::onIdle() {
+ if (screen_data.SpinnerDialogBox.auto_hide && !commandsInQueue()) {
+ screen_data.SpinnerDialogBox.auto_hide = false;
+ hide();
+ GOTO_PREVIOUS();
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp
new file mode 100644
index 0000000000..efc1cc38f3
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/statistics_screen.cpp
@@ -0,0 +1,77 @@
+/*************************
+ * statistics_screen.cpp *
+ *************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(PRINTCOUNTER)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+#define GRID_COLS 4
+#define GRID_ROWS 7
+
+void StatisticsScreen::onRedraw(draw_mode_t what) {
+ CommandProcessor cmd;
+
+ if (what & BACKGROUND) {
+ char buffer[21];
+
+ cmd.cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true))
+ .tag(0)
+
+ .font(Theme::font_medium)
+ .text(BTN_POS(1,1), BTN_SIZE(4,1), F("Printer Statistics"))
+ .font(Theme::font_small)
+ .tag(0)
+ .text(BTN_POS(1,2), BTN_SIZE(2,1), F("Total Prints:"), OPT_RIGHTX | OPT_CENTERY)
+ .text(BTN_POS(1,3), BTN_SIZE(2,1), F("Finished Prints:"), OPT_RIGHTX | OPT_CENTERY)
+ .text(BTN_POS(1,4), BTN_SIZE(2,1), F("Total Print Time:"), OPT_RIGHTX | OPT_CENTERY)
+ .text(BTN_POS(1,5), BTN_SIZE(2,1), F("Longest Print:"), OPT_RIGHTX | OPT_CENTERY)
+ .text(BTN_POS(1,6), BTN_SIZE(2,1), F("Filament Used:"), OPT_RIGHTX | OPT_CENTERY);
+ // Don't chain the following, it causes strange issues with evaluation ordering!
+ cmd.text(BTN_POS(3,2), BTN_SIZE(2,1), getTotalPrints_str(buffer));
+ cmd.text(BTN_POS(3,3), BTN_SIZE(2,1), getFinishedPrints_str(buffer));
+ cmd.text(BTN_POS(3,4), BTN_SIZE(2,1), getTotalPrintTime_str(buffer));
+ cmd.text(BTN_POS(3,5), BTN_SIZE(2,1), getLongestPrint_str(buffer));
+ cmd.text(BTN_POS(3,6), BTN_SIZE(2,1), getFilamentUsed_str(buffer));
+ }
+
+ if (what & FOREGROUND) {
+ cmd.font(Theme::font_medium)
+ .colors(action_btn)
+ .tag(1).button(BTN_POS(1,7), BTN_SIZE(4,1), F("Back"));
+ }
+}
+
+bool StatisticsScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); return true;
+ default: return false;
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI && PRINTCOUNTER
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp
new file mode 100644
index 0000000000..ebd52548d9
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/status_screen.cpp
@@ -0,0 +1,446 @@
+/*********************
+ * status_screen.cpp *
+ *********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+#include "screen_data.h"
+
+#include "../archim2-flash/flash_storage.h"
+
+#if ENABLED(SDSUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP)
+ #include "../../../../sd/cardreader.h"
+#endif
+
+using namespace FTDI;
+using namespace Theme;
+
+#ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 8
+#else
+ #define GRID_ROWS 8
+#endif
+
+void StatusScreen::draw_axis_position(draw_mode_t what) {
+ CommandProcessor cmd;
+
+ #define GRID_COLS 3
+
+ if (what & BACKGROUND) {
+ cmd.tag(6)
+ #ifdef TOUCH_UI_PORTRAIT
+ .fgcolor(Theme::axis_label)
+ .font(Theme::font_large)
+ .button( BTN_POS(1,5), BTN_SIZE(2,1), F(""), OPT_FLAT)
+ .button( BTN_POS(1,6), BTN_SIZE(2,1), F(""), OPT_FLAT)
+ .button( BTN_POS(1,7), BTN_SIZE(2,1), F(""), OPT_FLAT)
+
+ .font(Theme::font_small)
+ .text ( BTN_POS(1,5), BTN_SIZE(1,1), F("X"))
+ .text ( BTN_POS(1,6), BTN_SIZE(1,1), F("Y"))
+ .text ( BTN_POS(1,7), BTN_SIZE(1,1), F("Z"))
+
+ .font(Theme::font_medium)
+ .fgcolor(Theme::x_axis) .button( BTN_POS(2,5), BTN_SIZE(2,1), F(""), OPT_FLAT)
+ .fgcolor(Theme::y_axis) .button( BTN_POS(2,6), BTN_SIZE(2,1), F(""), OPT_FLAT)
+ .fgcolor(Theme::z_axis) .button( BTN_POS(2,7), BTN_SIZE(2,1), F(""), OPT_FLAT);
+ #else
+ .fgcolor(Theme::axis_label)
+ .font(Theme::font_large)
+ .button( BTN_POS(1,5), BTN_SIZE(1,2), F(""), OPT_FLAT)
+ .button( BTN_POS(2,5), BTN_SIZE(1,2), F(""), OPT_FLAT)
+ .button( BTN_POS(3,5), BTN_SIZE(1,2), F(""), OPT_FLAT)
+
+ .font(Theme::font_small)
+ .text ( BTN_POS(1,5), BTN_SIZE(1,1), F("X"))
+ .text ( BTN_POS(2,5), BTN_SIZE(1,1), F("Y"))
+ .text ( BTN_POS(3,5), BTN_SIZE(1,1), F("Z"))
+ .font(Theme::font_medium)
+
+ .fgcolor(Theme::x_axis) .button( BTN_POS(1,6), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(Theme::y_axis) .button( BTN_POS(2,6), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(Theme::z_axis) .button( BTN_POS(3,6), BTN_SIZE(1,1), F(""), OPT_FLAT);
+ #endif
+ }
+
+ if (what & FOREGROUND) {
+ using namespace ExtUI;
+ char x_str[15];
+ char y_str[15];
+ char z_str[15];
+
+ if (isAxisPositionKnown(X)) {
+ dtostrf(getAxisPosition_mm(X), 5, 1, x_str);
+ strcat_P(x_str, PSTR(" mm"));
+ } else {
+ strcpy_P(x_str, PSTR("?"));
+ }
+
+ if (isAxisPositionKnown(Y)) {
+ dtostrf(getAxisPosition_mm(Y), 5, 1, y_str);
+ strcat_P(y_str, PSTR(" mm"));
+ } else {
+ strcpy_P(y_str, PSTR("?"));
+ }
+
+ if (isAxisPositionKnown(Z)) {
+ dtostrf(getAxisPosition_mm(Z), 5, 1, z_str);
+ strcat_P(z_str, PSTR(" mm"));
+ } else {
+ strcpy_P(z_str, PSTR("?"));
+ }
+
+ cmd.tag(6).font(Theme::font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ .text ( BTN_POS(2,5), BTN_SIZE(2,1), x_str)
+ .text ( BTN_POS(2,6), BTN_SIZE(2,1), y_str)
+ .text ( BTN_POS(2,7), BTN_SIZE(2,1), z_str);
+ #else
+ .text ( BTN_POS(1,6), BTN_SIZE(1,1), x_str)
+ .text ( BTN_POS(2,6), BTN_SIZE(1,1), y_str)
+ .text ( BTN_POS(3,6), BTN_SIZE(1,1), z_str);
+ #endif
+ }
+
+ #undef GRID_COLS
+}
+
+#ifdef TOUCH_UI_PORTRAIT
+ #define GRID_COLS 8
+#else
+ #define GRID_COLS 12
+#endif
+
+void StatusScreen::draw_temperature(draw_mode_t what) {
+ using namespace Theme;
+
+ CommandProcessor cmd;
+
+ if (what & BACKGROUND) {
+ cmd.font(Theme::font_small)
+ #ifdef TOUCH_UI_PORTRAIT
+ .tag(5)
+ .fgcolor(temp) .button( BTN_POS(1,1), BTN_SIZE(4,2), F(""), OPT_FLAT)
+ .button( BTN_POS(1,1), BTN_SIZE(8,1), F(""), OPT_FLAT)
+ .fgcolor(fan_speed) .button( BTN_POS(5,2), BTN_SIZE(4,1), F(""), OPT_FLAT)
+ .tag(0)
+ .fgcolor(progress) .button( BTN_POS(1,3), BTN_SIZE(4,1), F(""), OPT_FLAT)
+ .button( BTN_POS(5,3), BTN_SIZE(4,1), F(""), OPT_FLAT);
+ #else
+ .tag(5)
+ .fgcolor(temp) .button( BTN_POS(1,1), BTN_SIZE(4,2), F(""), OPT_FLAT)
+ .button( BTN_POS(1,1), BTN_SIZE(8,1), F(""), OPT_FLAT)
+ .fgcolor(fan_speed) .button( BTN_POS(5,2), BTN_SIZE(4,1), F(""), OPT_FLAT)
+ .tag(0)
+ .fgcolor(progress) .button( BTN_POS(9,1), BTN_SIZE(4,1), F(""), OPT_FLAT)
+ .button( BTN_POS(9,2), BTN_SIZE(4,1), F(""), OPT_FLAT);
+ #endif
+
+ // Draw Extruder Bitmap on Extruder Temperature Button
+
+ cmd.tag(5)
+ .cmd(BITMAP_SOURCE(Extruder_Icon_Info))
+ .cmd(BITMAP_LAYOUT(Extruder_Icon_Info))
+ .cmd(BITMAP_SIZE (Extruder_Icon_Info))
+ .icon (BTN_POS(1,1), BTN_SIZE(1,1), Extruder_Icon_Info, icon_scale)
+ .icon (BTN_POS(5,1), BTN_SIZE(1,1), Extruder_Icon_Info, icon_scale);
+
+ // Draw Bed Heat Bitmap on Bed Heat Button
+ cmd.cmd(BITMAP_SOURCE(Bed_Heat_Icon_Info))
+ .cmd(BITMAP_LAYOUT(Bed_Heat_Icon_Info))
+ .cmd(BITMAP_SIZE (Bed_Heat_Icon_Info))
+ .icon (BTN_POS(1,2), BTN_SIZE(1,1), Bed_Heat_Icon_Info, icon_scale);
+
+ // Draw Fan Percent Bitmap on Bed Heat Button
+
+ cmd.cmd(BITMAP_SOURCE(Fan_Icon_Info))
+ .cmd(BITMAP_LAYOUT(Fan_Icon_Info))
+ .cmd(BITMAP_SIZE (Fan_Icon_Info))
+ .icon (BTN_POS(5,2), BTN_SIZE(1,1), Fan_Icon_Info, icon_scale);
+ }
+
+ if (what & FOREGROUND) {
+ using namespace ExtUI;
+ char e0_str[15];
+ char e1_str[15];
+ char bed_str[15];
+ char fan_str[15];
+
+ sprintf_P(
+ fan_str,
+ PSTR("%-3d %%"),
+ int8_t(getActualFan_percent(FAN0))
+ );
+
+ const char *idle = PSTR("%-3d C / idle");
+ const char *not_idle = PSTR("%-3d / %-3d C");
+
+ sprintf_P(
+ bed_str,
+ isHeaterIdle(BED) ? idle : not_idle,
+ ROUND(getActualTemp_celsius(BED)),
+ ROUND(getTargetTemp_celsius(BED))
+ );
+
+ sprintf_P(
+ e0_str,
+ isHeaterIdle(H0) ? idle : not_idle,
+ ROUND(getActualTemp_celsius(H0)),
+ ROUND(getTargetTemp_celsius(H0))
+ );
+
+ #if EXTRUDERS == 2
+ sprintf_P(
+ e1_str,
+ isHeaterIdle(H1) ? idle : not_idle,
+ ROUND(getActualTemp_celsius(H1)),
+ ROUND(getTargetTemp_celsius(H1))
+ );
+ #else
+ strcpy_P(
+ e1_str,
+ PSTR("-")
+ );
+ #endif
+
+ cmd.tag(5)
+ .font(font_medium)
+ .text(BTN_POS(2,1), BTN_SIZE(3,1), e0_str)
+ .text(BTN_POS(6,1), BTN_SIZE(3,1), e1_str)
+ .text(BTN_POS(2,2), BTN_SIZE(3,1), bed_str)
+ .text(BTN_POS(6,2), BTN_SIZE(3,1), fan_str);
+ }
+}
+
+void StatusScreen::draw_progress(draw_mode_t what) {
+ using namespace ExtUI;
+ using namespace Theme;
+
+ CommandProcessor cmd;
+
+ if (what & BACKGROUND) {
+ cmd.tag(0).font(font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ .fgcolor(progress) .button(BTN_POS(1,3), BTN_SIZE(4,1), F(""), OPT_FLAT)
+ .button(BTN_POS(5,3), BTN_SIZE(4,1), F(""), OPT_FLAT);
+ #else
+ .fgcolor(progress) .button(BTN_POS(9,1), BTN_SIZE(4,1), F(""), OPT_FLAT)
+ .button(BTN_POS(9,2), BTN_SIZE(4,1), F(""), OPT_FLAT);
+ #endif
+ }
+
+ if (what & FOREGROUND) {
+ const uint32_t elapsed = getProgress_seconds_elapsed();
+ const uint8_t hrs = elapsed/3600;
+ const uint8_t min = (elapsed/60)%60;
+
+ char time_str[10];
+ char progress_str[10];
+
+ sprintf_P(time_str, PSTR(" %02d : %02d"), hrs, min);
+ sprintf_P(progress_str, PSTR("%-3d %%"), getProgress_percent() );
+
+ cmd.font(font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ .tag(0).text(BTN_POS(1,3), BTN_SIZE(4,1), time_str)
+ .text(BTN_POS(5,3), BTN_SIZE(4,1), progress_str);
+ #else
+ .tag(0).text(BTN_POS(9,1), BTN_SIZE(4,1), time_str)
+ .text(BTN_POS(9,2), BTN_SIZE(4,1), progress_str);
+ #endif
+ }
+}
+
+#undef GRID_COLS
+
+
+void StatusScreen::draw_interaction_buttons(draw_mode_t what) {
+ #define GRID_COLS 4
+ if (what & FOREGROUND) {
+ using namespace ExtUI;
+
+ const bool has_media = isMediaInserted() && !isPrintingFromMedia();
+
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(Theme::font_medium)
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP)
+ .enabled(!Sd2Card::ready() || has_media)
+ #else
+ .enabled(has_media)
+ #endif
+ .colors(has_media ? action_btn : normal_btn)
+ #ifdef TOUCH_UI_PORTRAIT
+ .tag(3).button( BTN_POS(1,8), BTN_SIZE(2,1),
+ #else
+ .tag(3).button( BTN_POS(1,7), BTN_SIZE(2,2),
+ #endif
+ isPrintingFromMedia() ? F("Printing") :
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
+ #ifdef LULZBOT_MANUAL_USB_STARTUP
+ (Sd2Card::ready() ? F("USB Drive") : F("Enable USB"))
+ #else
+ F("USB Drive")
+ #endif
+ )
+ #else
+ F("SD Card"))
+ #endif
+ .colors(!has_media ? action_btn : normal_btn)
+ #ifdef TOUCH_UI_PORTRAIT
+ .tag(4).button( BTN_POS(3,8), BTN_SIZE(2,1), F("MENU"));
+ #else
+ .tag(4).button( BTN_POS(3,7), BTN_SIZE(2,2), F("MENU"));
+ #endif
+ }
+ #undef GRID_COLS
+}
+
+void StatusScreen::draw_status_message(draw_mode_t what, const char* message) {
+ #define GRID_COLS 1
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.fgcolor(Theme::status_msg)
+ .tag(0)
+ #ifdef TOUCH_UI_PORTRAIT
+ .button( BTN_POS(1,4), BTN_SIZE(1,1), F(""), OPT_FLAT);
+ #else
+ .button( BTN_POS(1,3), BTN_SIZE(1,2), F(""), OPT_FLAT);
+ #endif
+
+ draw_text_box(cmd,
+ #ifdef TOUCH_UI_PORTRAIT
+ BTN_POS(1,4), BTN_SIZE(1,1),
+ #else
+ BTN_POS(1,3), BTN_SIZE(1,2),
+ #endif
+ message, OPT_CENTER, font_large);
+ }
+ #undef GRID_COLS
+}
+
+void StatusScreen::setStatusMessage(progmem_str message) {
+ char buff[strlen_P((const char * const)message)+1];
+ strcpy_P(buff, (const char * const) message);
+ setStatusMessage((const char *) buff);
+}
+
+void StatusScreen::setStatusMessage(const char* message) {
+ CommandProcessor cmd;
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(Theme::bg_color))
+ .cmd(CLEAR(true,true,true));
+
+ draw_temperature(BACKGROUND);
+ draw_progress(BACKGROUND);
+ draw_axis_position(BACKGROUND);
+ draw_status_message(BACKGROUND, message);
+ draw_interaction_buttons(BACKGROUND);
+ storeBackground();
+
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPAIR("New status message: ", message);
+ #endif
+
+ if (AT_SCREEN(StatusScreen)) {
+ current_screen.onRefresh();
+ }
+}
+
+void StatusScreen::onStartup() {
+ // Load the bitmaps for the status screen
+
+ using namespace Theme;
+ constexpr uint32_t base = ftdi_memory_map::RAM_G;
+ CLCD::mem_write_pgm(base + TD_Icon_Info.RAMG_offset, TD_Icon, sizeof(TD_Icon));
+ CLCD::mem_write_pgm(base + Extruder_Icon_Info.RAMG_offset, Extruder_Icon, sizeof(Extruder_Icon));
+ CLCD::mem_write_pgm(base + Bed_Heat_Icon_Info.RAMG_offset, Bed_Heat_Icon, sizeof(Bed_Heat_Icon));
+ CLCD::mem_write_pgm(base + Fan_Icon_Info.RAMG_offset, Fan_Icon, sizeof(Fan_Icon));
+
+ setStatusMessage(F(WELCOME_MSG));
+
+ UIFlashStorage::initialize();
+}
+
+void StatusScreen::onRedraw(draw_mode_t what) {
+ if (what & FOREGROUND) {
+ draw_temperature(FOREGROUND);
+ draw_progress(FOREGROUND);
+ draw_axis_position(FOREGROUND);
+ draw_interaction_buttons(FOREGROUND);
+ }
+}
+
+void StatusScreen::onEntry() {
+ onRefresh();
+}
+
+void StatusScreen::onIdle() {
+ if (refresh_timer.elapsed(STATUS_UPDATE_INTERVAL)) {
+ onRefresh();
+ refresh_timer.start();
+ }
+ BaseScreen::onIdle();
+}
+
+bool StatusScreen::onTouchEnd(uint8_t tag) {
+ using namespace ExtUI;
+
+ switch (tag) {
+ case 3:
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) && defined(LULZBOT_MANUAL_USB_STARTUP)
+ if (!Sd2Card::ready()) {
+ StatusScreen::setStatusMessage(F("Insert USB drive..."));
+ Sd2Card::usbStartup();
+ } else {
+ GOTO_SCREEN(FilesScreen);
+ }
+ #else
+ GOTO_SCREEN(FilesScreen);
+ #endif
+ break;
+ case 4:
+ if (isPrinting()) {
+ GOTO_SCREEN(TuneMenu);
+ } else {
+ GOTO_SCREEN(MainMenu);
+ }
+ break;
+ case 5: GOTO_SCREEN(TemperatureScreen); break;
+ case 6:
+ if (!isPrinting()) {
+ GOTO_SCREEN(MoveAxisScreen);
+ }
+ break;
+ default:
+ return true;
+ }
+ // If a passcode is enabled, the LockScreen will prevent the
+ // user from proceeding.
+ LockScreen::check_passcode();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_bump_sensitivity_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_bump_sensitivity_screen.cpp
new file mode 100644
index 0000000000..651bfa8d5c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_bump_sensitivity_screen.cpp
@@ -0,0 +1,77 @@
+/**************************************
+ * stepper_bump_sensiivity_screen.cpp *
+ **************************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && HAS_TRINAMIC
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void StepperBumpSensitivityScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0, BaseNumericAdjustmentScreen::DEFAULT_LOWEST);
+ w.heading( PSTR("TMC Bump Sensitivity"));
+ w.color(x_axis) .adjuster( 2, PSTR("X:"), getTMCBumpSensitivity(X),
+ #if X_SENSORLESS && AXIS_HAS_STALLGUARD(X)
+ true
+ #else
+ false
+ #endif
+ );
+ w.color(y_axis) .adjuster( 4, PSTR("Y:"), getTMCBumpSensitivity(Y),
+ #if Y_SENSORLESS && AXIS_HAS_STALLGUARD(Y)
+ true
+ #else
+ false
+ #endif
+ );
+ w.color(z_axis) .adjuster( 6, PSTR("Z:"), getTMCBumpSensitivity(Z),
+ #if Z_SENSORLESS && AXIS_HAS_STALLGUARD(Z)
+ true
+ #else
+ false
+ #endif
+ );
+ w.increments();
+}
+
+bool StepperBumpSensitivityScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(TMCBumpSensitivity, X ); break;
+ case 3: UI_INCREMENT(TMCBumpSensitivity, X ); break;
+ case 4: UI_DECREMENT(TMCBumpSensitivity, Y ); break;
+ case 5: UI_INCREMENT(TMCBumpSensitivity, Y ); break;
+ case 6: UI_DECREMENT(TMCBumpSensitivity, Z ); break;
+ case 7: UI_INCREMENT(TMCBumpSensitivity, Z ); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI && HAS_TRINAMIC
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_current_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_current_screen.cpp
new file mode 100644
index 0000000000..edeed68251
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stepper_current_screen.cpp
@@ -0,0 +1,86 @@
+/******************************
+ * stepper_current_screen.cpp *
+ ******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && HAS_TRINAMIC
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void StepperCurrentScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0);
+ w.units(PSTR("mA"));
+ w.heading( PSTR("Stepper Current"));
+ w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisCurrent_mA(X) );
+ w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisCurrent_mA(Y) );
+ w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisCurrent_mA(Z) );
+ #if EXTRUDERS == 1
+ w.color(e_axis).adjuster( 8, PSTR("E:"), getAxisCurrent_mA(E0) );
+ #elif EXTRUDERS > 1
+ w.color(e_axis).adjuster( 8, PSTR("E1:"), getAxisCurrent_mA(E0) );
+ w.color(e_axis).adjuster(10, PSTR("E2:"), getAxisCurrent_mA(E1) );
+ #if EXTRUDERS > 2
+ w.color(e_axis).adjuster(12, PSTR("E3:"), getAxisCurrent_mA(E2) );
+ #endif
+ #if EXTRUDERS > 3
+ w.color(e_axis).adjuster(14, PSTR("E4:"), getAxisCurrent_mA(E3) );
+ #endif
+ #endif
+ w.increments();
+}
+
+bool StepperCurrentScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(AxisCurrent_mA, X ); break;
+ case 3: UI_INCREMENT(AxisCurrent_mA, X ); break;
+ case 4: UI_DECREMENT(AxisCurrent_mA, Y ); break;
+ case 5: UI_INCREMENT(AxisCurrent_mA, Y ); break;
+ case 6: UI_DECREMENT(AxisCurrent_mA, Z ); break;
+ case 7: UI_INCREMENT(AxisCurrent_mA, Z ); break;
+ case 8: UI_DECREMENT(AxisCurrent_mA, E0); break;
+ case 9: UI_INCREMENT(AxisCurrent_mA, E0); break;
+ #if EXTRUDERS > 1
+ case 10: UI_DECREMENT(AxisCurrent_mA, E1); break;
+ case 11: UI_INCREMENT(AxisCurrent_mA, E1); break;
+ #endif
+ #if EXTRUDERS > 2
+ case 12: UI_DECREMENT(AxisCurrent_mA, E2); break;
+ case 13: UI_INCREMENT(AxisCurrent_mA, E2); break;
+ #endif
+ #if EXTRUDERS > 3
+ case 14: UI_DECREMENT(AxisCurrent_mA, E3); break;
+ case 15: UI_INCREMENT(AxisCurrent_mA, E3); break;
+ #endif
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/steps_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/steps_screen.cpp
new file mode 100644
index 0000000000..f368b3b425
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/steps_screen.cpp
@@ -0,0 +1,86 @@
+/********************
+ * steps_screen.cpp *
+ ********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void StepsScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0);
+ w.units(PSTR("st/mm"));
+ w.heading( PSTR("Steps/mm"));
+ w.color(x_axis) .adjuster( 2, PSTR("X:"), getAxisSteps_per_mm(X) );
+ w.color(y_axis) .adjuster( 4, PSTR("Y:"), getAxisSteps_per_mm(Y) );
+ w.color(z_axis) .adjuster( 6, PSTR("Z:"), getAxisSteps_per_mm(Z) );
+ #if EXTRUDERS == 1 || DISABLED(DISTINCT_E_FACTORS)
+ w.color(e_axis) .adjuster( 8, PSTR("E:"), getAxisSteps_per_mm(E0) );
+ #elif EXTRUDERS > 1
+ w.color(e_axis) .adjuster( 8, PSTR("E1:"), getAxisSteps_per_mm(E0) );
+ w.color(e_axis) .adjuster(10, PSTR("E2:"), getAxisSteps_per_mm(E1) );
+ #if EXTRUDERS > 2
+ w.color(e_axis) .adjuster(12, PSTR("E3:"), getAxisSteps_per_mm(E2) );
+ #endif
+ #if EXTRUDERS > 3
+ w.color(e_axis) .adjuster(14, PSTR("E4:"), getAxisSteps_per_mm(E3) );
+ #endif
+ #endif
+ w.increments();
+}
+
+bool StepsScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 2: UI_DECREMENT(AxisSteps_per_mm, X); break;
+ case 3: UI_INCREMENT(AxisSteps_per_mm, X); break;
+ case 4: UI_DECREMENT(AxisSteps_per_mm, Y); break;
+ case 5: UI_INCREMENT(AxisSteps_per_mm, Y); break;
+ case 6: UI_DECREMENT(AxisSteps_per_mm, Z); break;
+ case 7: UI_INCREMENT(AxisSteps_per_mm, Z); break;
+ case 8: UI_DECREMENT(AxisSteps_per_mm, E0); break;
+ case 9: UI_INCREMENT(AxisSteps_per_mm, E0); break;
+ #if EXTRUDERS > 1
+ case 10: UI_DECREMENT(AxisSteps_per_mm, E1); break;
+ case 11: UI_INCREMENT(AxisSteps_per_mm, E1); break;
+ #endif
+ #if EXTRUDERS > 2
+ case 12: UI_DECREMENT(AxisSteps_per_mm, E2); break;
+ case 13: UI_INCREMENT(AxisSteps_per_mm, E2); break;
+ #endif
+ #if EXTRUDERS > 3
+ case 14: UI_DECREMENT(AxisSteps_per_mm, E3); break;
+ case 15: UI_INCREMENT(AxisSteps_per_mm, E3); break;
+ #endif
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp
new file mode 100644
index 0000000000..5ef8331473
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/stress_test_screen.cpp
@@ -0,0 +1,151 @@
+/**************************
+ * stress_test_screen.cpp *
+ **************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+
+#include "screens.h"
+#include "screen_data.h"
+
+#define STRESS_TEST_CHANGE_INTERVAL 6000
+
+#define GRID_COLS 4
+#define GRID_ROWS 9
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+void StressTestScreen::drawDots(uint16_t x, uint16_t y, uint16_t w, uint16_t h) {
+ CommandProcessor cmd;
+ for(uint8_t i = 0; i < 100; i++) {
+ cmd.cmd(BEGIN(POINTS))
+ .cmd(POINT_SIZE(20*16))
+ .cmd(COLOR_RGB(random(0xFFFFFF)))
+ .cmd(VERTEX2F((x + random(w)) * 16,(y + random(h)) * 16));
+ }
+}
+
+bool StressTestScreen::watchDogTestNow() {
+ return screen_data.StressTestScreen.next_watchdog_trigger &&
+ ELAPSED(millis(), screen_data.StressTestScreen.next_watchdog_trigger);
+}
+
+void StressTestScreen::onRedraw(draw_mode_t) {
+ using namespace ExtUI;
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .font(font_medium)
+ .text(BTN_POS(1,1), BTN_SIZE(4,1), progmem_str(screen_data.StressTestScreen.message));
+
+ drawDots(BTN_POS(1,3), BTN_SIZE(4,4));
+
+ cmd.font(font_medium).enabled(!watchDogTestNow()).colors(action_btn).tag(1).button(BTN_POS(2,8), BTN_SIZE(2,1), F("Exit"));
+}
+
+bool StressTestScreen::onTouchEnd(uint8_t tag) {
+ CommandProcessor cmd;
+ switch (tag) {
+ case 1:
+ runTestOnBootup(false);
+ GOTO_SCREEN(StatusScreen);
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+void StressTestScreen::runTestOnBootup(bool enable) {
+ // Use a magic value in passcode to indicate
+ // whether or not we need to re-run the test
+ // at startup.
+ LockScreen::set_hash(enable ? 0xDEAD : 0);
+ injectCommands_P(PSTR("M500"));
+}
+
+void StressTestScreen::startupCheck() {
+ if (LockScreen::get_hash() == 0xDEAD) {
+ GOTO_SCREEN(StressTestScreen);
+ }
+}
+
+void StressTestScreen::onEntry() {
+ screen_data.StressTestScreen.next_watchdog_trigger = millis() + 10000 + random(40000);
+ screen_data.StressTestScreen.message = PSTR("Test 1: Stress testing...");
+
+ // Turn off heaters.
+ setTargetTemp_celsius(0, E0);
+ setTargetTemp_celsius(0, E1);
+ setTargetTemp_celsius(0, BED);
+
+ runTestOnBootup(true);
+}
+
+void StressTestScreen::recursiveLockup() {
+ screen_data.StressTestScreen.message = PSTR("Test 2: Printer will restart.");
+ current_screen.onRefresh();
+ recursiveLockup();
+}
+
+void StressTestScreen::iterativeLockup() {
+ screen_data.StressTestScreen.message = PSTR("Test 3: Printer will restart.");
+ for(;;) current_screen.onRefresh();
+}
+
+void StressTestScreen::onIdle() {
+ current_screen.onRefresh();
+ reset_menu_timeout();
+
+ if (!commandsInQueue()) {
+ if (!isPositionKnown()) {
+ injectCommands_P(PSTR("G28"));
+ } else {
+ injectCommands_P(PSTR(
+ "G0 X100 Y100 Z100 F6000\n"
+ "T0\nG4 S1"
+ #if EXTRUDERS > 1
+ "\nT1\nG4 S1"
+ #endif
+ "\nG0 X150 Y150 Z150"
+ ));
+ }
+ }
+
+ if (refresh_timer.elapsed(STRESS_TEST_CHANGE_INTERVAL)) {
+ setTargetFan_percent(random(100),FAN0);
+ }
+
+ if (watchDogTestNow()) {
+ if (random(2) % 2)
+ iterativeLockup();
+ else
+ recursiveLockup();
+ }
+
+ BaseScreen::onIdle();
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp
new file mode 100644
index 0000000000..126562d018
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/temperature_screen.cpp
@@ -0,0 +1,111 @@
+/*******************
+ * boot_screen.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+using namespace ExtUI;
+
+void TemperatureScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(0).color(temp).units(PSTR("C"));
+ w.heading( PSTR("Temperature:"));
+ w.button(30, PSTR("Cooldown (All Off)"));
+ #ifndef LULZBOT_DISABLE_TOOLHEAD_HEATER
+ #if HOTENDS == 1
+ w.adjuster( 2, PSTR("Hot End:"), getTargetTemp_celsius(E0));
+ #else
+ w.adjuster( 2, PSTR("Hot End 1:"), getTargetTemp_celsius(E0));
+ w.adjuster( 4, PSTR("Hot End 2:"), getTargetTemp_celsius(E1));
+ #if HOTENDS > 2
+ w.adjuster( 6, PSTR("Hot End 3:"), getTargetTemp_celsius(E2));
+ #endif
+ #if HOTENDS > 3
+ w.adjuster( 8, PSTR("Hot End 4:"), getTargetTemp_celsius(E3));
+ #endif
+ #endif
+ #endif
+ #if HAS_HEATED_BED
+ w.adjuster( 20, PSTR("Bed:"), getTargetTemp_celsius(BED));
+ #endif
+ #if FAN_COUNT > 0
+ w.color(fan_speed).units(PSTR("%"));
+ w.adjuster( 10, PSTR("Fan Speed:"), getTargetFan_percent(FAN0));
+ #endif
+ w.increments();
+}
+
+bool TemperatureScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 20: UI_DECREMENT(TargetTemp_celsius, BED); break;
+ case 21: UI_INCREMENT(TargetTemp_celsius, BED); break;
+ #ifndef LULZBOT_DISABLE_TOOLHEAD_HEATER
+ case 2: UI_DECREMENT(TargetTemp_celsius, E0); break;
+ case 3: UI_INCREMENT(TargetTemp_celsius, E0); break;
+ #endif
+ #if HOTENDS > 1
+ case 4: UI_DECREMENT(TargetTemp_celsius, E1); break;
+ case 5: UI_INCREMENT(TargetTemp_celsius, E1); break;
+ #endif
+ #if HOTENDS > 2
+ case 6: UI_DECREMENT(TargetTemp_celsius, E2); break;
+ case 7: UI_INCREMENT(TargetTemp_celsius, E2); break;
+ #endif
+ #if HOTENDS > 3
+ case 8: UI_DECREMENT(TargetTemp_celsius, E3); break;
+ case 9: UI_INCREMENT(TargetTemp_celsius, E3); break;
+ #endif
+ #if FAN_COUNT > 0
+ case 10: UI_DECREMENT(TargetFan_percent, FAN0); break;
+ case 11: UI_INCREMENT(TargetFan_percent, FAN0); break;
+ #endif
+ case 30:
+ setTargetTemp_celsius(0,E0);
+ #if HOTENDS > 1
+ setTargetTemp_celsius(0,E1);
+ #if HOTENDS > 2
+ setTargetTemp_celsius(0,E2);
+ #if HOTENDS > 3
+ setTargetTemp_celsius(0,E4);
+ #endif
+ #endif
+ #endif
+ #if HAS_HEATED_BED
+ setTargetTemp_celsius(0,BED);
+ #endif
+ #if FAN_COUNT > 0
+ setTargetFan_percent(0,FAN0);
+ #endif
+ break;
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_calibration_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_calibration_screen.cpp
new file mode 100644
index 0000000000..0adf2885b0
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_calibration_screen.cpp
@@ -0,0 +1,116 @@
+/********************************
+ * touch_calibration_screen.cpp *
+ ********************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+#define GRID_COLS 4
+#define GRID_ROWS 16
+
+void TouchCalibrationScreen::onEntry() {
+ CommandProcessor cmd;
+
+ BaseScreen::onEntry();
+
+ if (CLCD::is_touching()) {
+ // Ask the user to release the touch before starting,
+ // as otherwise the first calibration point could
+ // be misinterpreted.
+ cmd.cmd(CMD_DLSTART)
+ .cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_large)
+ .text ( BTN_POS(1,8), BTN_SIZE(4,1), F("Release to begin"))
+ .text ( BTN_POS(1,9), BTN_SIZE(4,1), F("screen calibration"))
+ #else
+ .font(
+ #ifdef TOUCH_UI_800x480
+ font_large
+ #else
+ font_medium
+ #endif
+ )
+ .text ( BTN_POS(1,1), BTN_SIZE(4,16), F("Release to calibrate"))
+ #endif
+ .cmd(DL::DL_DISPLAY)
+ .cmd(CMD_SWAP)
+ .execute();
+
+ while (CLCD::is_touching()) {
+ #ifdef UI_FRAMEWORK_DEBUG
+ SERIAL_ECHO_START();
+ SERIAL_ECHOLNPGM("Waiting for touch release");
+ #endif
+ }
+ }
+
+ // Force a refresh
+ cmd.cmd(CMD_DLSTART);
+ onRedraw(FOREGROUND);
+ cmd.cmd(DL::DL_DISPLAY);
+ cmd.execute();
+}
+
+void TouchCalibrationScreen::onRefresh() {
+ // Don't do the regular refresh, as this would
+ // cause the calibration be restarted on every
+ // touch.
+}
+
+void TouchCalibrationScreen::onRedraw(draw_mode_t) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+
+ #ifdef TOUCH_UI_PORTRAIT
+ .font(font_large)
+ .text ( BTN_POS(1,8), BTN_SIZE(4,1), F("Touch the dots"))
+ .text ( BTN_POS(1,9), BTN_SIZE(4,1), F("to calibrate"))
+ #else
+ .font(
+ #ifdef TOUCH_UI_800x480
+ font_large
+ #else
+ font_medium
+ #endif
+ )
+ .text ( BTN_POS(1,1), BTN_SIZE(4,16), F("Touch the dots to calibrate"))
+ #endif
+ .cmd(CMD_CALIBRATE);
+}
+
+void TouchCalibrationScreen::onIdle() {
+ if (!CLCD::is_touching() && !CommandProcessor::is_processing()) {
+ GOTO_PREVIOUS();
+ }
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp
new file mode 100644
index 0000000000..4cb63077d8
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/touch_registers_screen.cpp
@@ -0,0 +1,86 @@
+/******************************
+ * touch_registers_screen.cpp *
+ ******************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void TouchRegistersScreen::onRedraw(draw_mode_t) {
+ const uint32_t T_Transform_A = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_A);
+ const uint32_t T_Transform_B = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_B);
+ const uint32_t T_Transform_C = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_C);
+ const uint32_t T_Transform_D = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_D);
+ const uint32_t T_Transform_E = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_E);
+ const uint32_t T_Transform_F = CLCD::mem_read_32(CLCD::REG::TOUCH_TRANSFORM_F);
+ char b[20];
+
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .tag(0);
+
+ #define GRID_ROWS 7
+ #define GRID_COLS 2
+ cmd.tag(0)
+ .font(font_xsmall)
+ .fgcolor(transformA) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("TOUCH_XFORM_A"))
+ .fgcolor(transformB) .button( BTN_POS(1,2), BTN_SIZE(1,1), F("TOUCH_XFORM_B"))
+ .fgcolor(transformC) .button( BTN_POS(1,3), BTN_SIZE(1,1), F("TOUCH_XFORM_C"))
+ .fgcolor(transformD) .button( BTN_POS(1,4), BTN_SIZE(1,1), F("TOUCH_XFORM_D"))
+ .fgcolor(transformE) .button( BTN_POS(1,5), BTN_SIZE(1,1), F("TOUCH_XFORM_E"))
+ .fgcolor(transformF) .button( BTN_POS(1,6), BTN_SIZE(1,1), F("TOUCH_XFORM_F"))
+
+ .fgcolor(transformVal).button( BTN_POS(2,1), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(transformVal).button( BTN_POS(2,2), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(transformVal).button( BTN_POS(2,3), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(transformVal).button( BTN_POS(2,4), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(transformVal).button( BTN_POS(2,5), BTN_SIZE(1,1), F(""), OPT_FLAT)
+ .fgcolor(transformVal).button( BTN_POS(2,6), BTN_SIZE(1,1), F(""), OPT_FLAT);
+
+ sprintf_P(b, PSTR("0x%08lX"), T_Transform_A); cmd.text( BTN_POS(2,1), BTN_SIZE(1,1), b);
+ sprintf_P(b, PSTR("0x%08lX"), T_Transform_B); cmd.text( BTN_POS(2,2), BTN_SIZE(1,1), b);
+ sprintf_P(b, PSTR("0x%08lX"), T_Transform_C); cmd.text( BTN_POS(2,3), BTN_SIZE(1,1), b);
+ sprintf_P(b, PSTR("0x%08lX"), T_Transform_D); cmd.text( BTN_POS(2,4), BTN_SIZE(1,1), b);
+ sprintf_P(b, PSTR("0x%08lX"), T_Transform_E); cmd.text( BTN_POS(2,5), BTN_SIZE(1,1), b);
+ sprintf_P(b, PSTR("0x%08lX"), T_Transform_F); cmd.text( BTN_POS(2,6), BTN_SIZE(1,1), b);
+
+ cmd.colors(action_btn).font(font_medium)
+ .tag(1).button( BTN_POS(2,7), BTN_SIZE(1,1), F("Back"));
+ #undef GRID_COLS
+ #undef GRID_ROWS
+ }
+
+ bool TouchRegistersScreen::onTouchEnd(uint8_t tag) {
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ default:
+ return false;
+ }
+ return true;
+ }
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp
new file mode 100644
index 0000000000..37b60ed88c
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/tune_menu.cpp
@@ -0,0 +1,167 @@
+/*******************
+ * tune_menu.cpp *
+ *******************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && !defined(LULZBOT_USE_BIOPRINTER_UI)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace Theme;
+
+void TuneMenu::onRedraw(draw_mode_t what) {
+ if (what & BACKGROUND) {
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .font(font_medium);
+ }
+
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_ROWS 8
+ #define GRID_COLS 2
+ #else
+ #define GRID_ROWS 4
+ #define GRID_COLS 2
+ #endif
+
+ if (what & FOREGROUND) {
+ using namespace ExtUI;
+
+ CommandProcessor cmd;
+ cmd.colors(normal_btn)
+ .font(font_medium)
+ #ifdef TOUCH_UI_PORTRAIT
+ .tag(2).enabled(1) .button( BTN_POS(1,1), BTN_SIZE(2,1), F("Temperature"))
+ .tag(3).enabled(!isPrinting()).button( BTN_POS(1,2), BTN_SIZE(2,1), F("Change Filament"))
+ #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(9).button( BTN_POS(1,3), BTN_SIZE(2,1), F("Filament Options"))
+ #if ENABLED(BABYSTEPPING)
+ .tag(4).enabled(1) .button( BTN_POS(1,4), BTN_SIZE(2,1), F("Nudge Nozzle"))
+ #else
+ #if HAS_BED_PROBE
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(4) .button( BTN_POS(1,4), BTN_SIZE(2,1), F("Adjust Z-Offset"))
+ #endif
+ .tag(5).enabled(1) .button( BTN_POS(1,5), BTN_SIZE(2,1), F("Print Speed"))
+ .tag(isPrintingFromMediaPaused() ? 7 : 6)
+ #if ENABLED(SDSUPPORT)
+ .enabled(isPrintingFromMedia())
+ #else
+ .enabled(0)
+ #endif
+ .button( BTN_POS(1,6), BTN_SIZE(2,1), isPrintingFromMediaPaused() ? F("Resume Print") : F("Pause Print"))
+ #if ENABLED(SDSUPPORT)
+ .enabled(isPrintingFromMedia())
+ #else
+ .enabled(0)
+ #endif
+ .tag(8) .button( BTN_POS(1,7), BTN_SIZE(2,1), F("Cancel Print"))
+ .tag(1).colors(action_btn)
+ .button( BTN_POS(1,8), BTN_SIZE(2,1), F("Back"));
+ #else // TOUCH_UI_PORTRAIT
+ .tag(2).enabled(1) .button( BTN_POS(1,1), BTN_SIZE(1,1), F("Temperature"))
+ .tag(3).enabled(!isPrinting()).button( BTN_POS(1,2), BTN_SIZE(1,1), F("Change Filament"))
+ #if ENABLED(BABYSTEPPING)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ #if ENABLED(BABYSTEPPING)
+ .tag(4) .button( BTN_POS(2,1), BTN_SIZE(1,1), F("Nudge Nozzle"))
+ #else
+ #if HAS_BED_PROBE
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(4) .button( BTN_POS(1,4), BTN_SIZE(2,1), F("Adjust Z-Offset"))
+ #endif
+ .tag(5).enabled(1) .button( BTN_POS(2,2), BTN_SIZE(1,1), F("Print Speed"))
+ .tag(isPrintingFromMediaPaused() ? 7 : 6)
+ #if ENABLED(SDSUPPORT)
+ .enabled(isPrintingFromMedia())
+ #else
+ .enabled(0)
+ #endif
+ .button( BTN_POS(1,3), BTN_SIZE(1,1), isPrintingFromMediaPaused() ? F("Resume Print") : F("Pause Print"))
+ #if ENABLED(SDSUPPORT)
+ .enabled(isPrintingFromMedia())
+ #else
+ .enabled(0)
+ #endif
+ .tag(8). button( BTN_POS(2,3), BTN_SIZE(1,1), F("Cancel Print"))
+ #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ .enabled(1)
+ #else
+ .enabled(0)
+ #endif
+ .tag(9).button( BTN_POS(1,4), BTN_SIZE(1,1), F("Filament Options"))
+ .tag(1).colors(action_btn) .button( BTN_POS(2,4), BTN_SIZE(1,1), F("Back"));
+ #endif
+ }
+ #undef GRID_COLS
+ #undef GRID_ROWS
+}
+
+bool TuneMenu::onTouchEnd(uint8_t tag) {
+ using namespace Theme;
+ using namespace ExtUI;
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ case 2: GOTO_SCREEN(TemperatureScreen); break;
+ case 3: GOTO_SCREEN(ChangeFilamentScreen); break;
+ case 4:
+ #if ENABLED(BABYSTEPPING)
+ GOTO_SCREEN(NudgeNozzleScreen);
+ #else
+ #if HAS_BED_PROBE
+ GOTO_SCREEN(ZOffsetScreen);
+ #endif
+ #endif
+ break;
+ case 5: GOTO_SCREEN(FeedratePercentScreen); break;
+ case 6: sound.play(twinkle, PLAY_ASYNCHRONOUS); ExtUI::pausePrint(); GOTO_SCREEN(StatusScreen); break;
+ case 7: sound.play(twinkle, PLAY_ASYNCHRONOUS); ExtUI::resumePrint(); GOTO_SCREEN(StatusScreen); break;
+ case 8:
+ GOTO_SCREEN(ConfirmAbortPrintDialogBox);
+ current_screen.forget();
+ PUSH_SCREEN(StatusScreen);
+ break;
+ #if ENABLED(LIN_ADVANCE) || ENABLED(FILAMENT_RUNOUT_SENSOR)
+ case 9: GOTO_SCREEN(FilamentMenu); break;
+ #endif
+ default:
+ return false;
+ }
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp
new file mode 100644
index 0000000000..a3988ed532
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/widget_demo_screen.cpp
@@ -0,0 +1,158 @@
+/**************************
+ * widget_demo_screen.cpp *
+ **************************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && ENABLED(DEVELOPER_SCREENS)
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+uint16_t slider_val;
+bool show_grid;
+
+void WidgetsScreen::onEntry() {
+ BaseScreen::onEntry();
+ CLCD::turn_on_backlight();
+ SoundPlayer::set_volume(255);
+}
+
+void WidgetsScreen::onRedraw(draw_mode_t) {
+ using namespace ExtUI;
+ CommandProcessor cmd;
+ cmd.cmd(CLEAR_COLOR_RGB(bg_color))
+ .cmd(CLEAR(true,true,true))
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .tag(0);
+
+ const uint16_t hrs = (slider_val*12/0xFFFFU);
+ const uint16_t m = (slider_val*12*60/0xFFFFU)%60;
+ const uint16_t s = (slider_val*12*60*60/0xFFFFU)%60;
+
+ #ifdef TOUCH_UI_PORTRAIT
+ #define GRID_COLS 3
+ #define GRID_ROWS 8
+ cmd.font(font_large)
+ .cmd(COLOR_RGB(bg_text_enabled))
+ .text (BTN_POS(1,1), BTN_SIZE(3,1), F("Sample Widgets"))
+ .tag(0).text (BTN_POS(2,6), BTN_SIZE(1,1), F("Show grid:"))
+ .colors(ui_toggle)
+ .tag(2).dial (BTN_POS(1,2), BTN_SIZE(1,2), slider_val)
+ .tag(0).clock (BTN_POS(1,4), BTN_SIZE(1,2), hrs, m, s, 0)
+ .gauge (BTN_POS(1,6), BTN_SIZE(1,2), 5, 4, slider_val, 0xFFFFU)
+ .font(font_medium)
+ .colors(ui_slider)
+ .tag(4).slider (BTN_POS(2,3), BTN_SIZE(2,1), slider_val, 0xFFFFU)
+ .tag(5).progress (BTN_POS(2,4), BTN_SIZE(2,1), slider_val, 0xFFFFU)
+ .tag(6).scrollbar (BTN_POS(2,5), BTN_SIZE(2,1), slider_val, 1000, 0xFFFFU)
+ .font(font_small)
+ .colors(ui_toggle)
+ .tag(7).toggle (BTN_POS(3,6), BTN_SIZE(1,1), F("no\xFFyes"), show_grid)
+ .colors(normal_btn)
+ .font(font_medium)
+ .tag(1)
+ .button (BTN_POS(2, 8), BTN_SIZE(1,1), F("1"))
+ .button (BTN_POS(3, 8), BTN_SIZE(1,1), F("2"))
+ .colors(action_btn)
+ .button (BTN_POS(1, 8), BTN_SIZE(1,1), F("Back"));
+ #else
+ #define GRID_COLS 4
+ #define GRID_ROWS 8
+
+ cmd.font(font_large)
+ .text (BTN_POS(1,1), BTN_SIZE(4,1), F("Sample Widgets"))
+ .tag(0).text (BTN_POS(3,6), BTN_SIZE(1,1), F("Show grid:"))
+ .colors(ui_toggle)
+ .tag(2).dial (BTN_POS(1,2), BTN_SIZE(1,3), slider_val)
+ .tag(3).dial (BTN_POS(1,5), BTN_SIZE(1,3), slider_val)
+ .tag(0).clock (BTN_POS(2,2), BTN_SIZE(1,3), hrs, m, s, 0)
+ .gauge (BTN_POS(2,5), BTN_SIZE(1,3), 5, 4, slider_val, 0xFFFFU)
+ .font(font_medium)
+ .colors(ui_slider)
+ .tag(4).slider (BTN_POS(3,3), BTN_SIZE(2,1), slider_val, 0xFFFFU)
+ .tag(5).progress (BTN_POS(3,4), BTN_SIZE(2,1), slider_val, 0xFFFFU)
+ .tag(6).scrollbar (BTN_POS(3,5), BTN_SIZE(2,1), slider_val, 1000, 0xFFFFU)
+ .font(font_small)
+ .colors(ui_toggle)
+ .tag(7).toggle (BTN_POS(4,6), BTN_SIZE(1,1), F("no\xFFyes"), show_grid)
+ .colors(normal_btn)
+ .font(font_medium)
+ .tag(1).button (BTN_POS(3, 8), BTN_SIZE(1,1), F("1"))
+ .button (BTN_POS(4, 8), BTN_SIZE(1,1), F("2"))
+ .colors(action_btn)
+ .button (BTN_POS(1, 8), BTN_SIZE(2,1), F("Back"));
+ #endif
+
+ cmd.cmd(COLOR_RGB(bg_text_enabled));
+ if (show_grid) DRAW_LAYOUT_GRID
+}
+
+bool WidgetsScreen::onTouchStart(uint8_t tag) {
+ CommandProcessor cmd;
+ switch (tag) {
+ case 1: GOTO_PREVIOUS(); break;
+ #ifdef TOUCH_UI_PORTRAIT
+ case 2: cmd.track_circular (BTN_POS(1,2), BTN_SIZE(1,2), 2).execute(); break;
+ case 4: cmd.track_linear (BTN_POS(2,3), BTN_SIZE(2,1), 4).execute(); break;
+ case 5: cmd.track_linear (BTN_POS(2,4), BTN_SIZE(2,1), 5).execute(); break;
+ case 6: cmd.track_linear (BTN_POS(2,5), BTN_SIZE(2,1), 6).execute(); break;
+ #else
+ case 2: cmd.track_circular (BTN_POS(1,2), BTN_SIZE(1,3), 2).execute(); break;
+ case 3: cmd.track_circular (BTN_POS(1,5), BTN_SIZE(1,3), 3).execute(); break;
+ case 4: cmd.track_linear (BTN_POS(3,3), BTN_SIZE(2,1), 4).execute(); break;
+ case 5: cmd.track_linear (BTN_POS(3,4), BTN_SIZE(2,1), 5).execute(); break;
+ case 6: cmd.track_linear (BTN_POS(3,5), BTN_SIZE(2,1), 6).execute(); break;
+ #endif
+ case 7: show_grid = !show_grid; break;
+ default:
+ return false;
+ }
+
+ return true;
+}
+
+void WidgetsScreen::onIdle() {
+ if (refresh_timer.elapsed(TOUCH_UPDATE_INTERVAL)) {
+ refresh_timer.start();
+
+ uint16_t value;
+ CommandProcessor cmd;
+ switch (cmd.track_tag(value)) {
+ case 1:
+ case 2:
+ case 3:
+ case 4:
+ case 5:
+ case 6:
+ slider_val = value; break;
+ default:
+ return;
+ }
+ onRefresh();
+ }
+ BaseScreen::onIdle();
+}
+
+#endif // LULZBOT_TOUCH_UI && DEVELOPER_SCREENS
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/z_offset_screen.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/z_offset_screen.cpp
new file mode 100644
index 0000000000..5b26bb5394
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/screens/z_offset_screen.cpp
@@ -0,0 +1,54 @@
+/***********************
+ * z_offset_screen.cpp *
+ ***********************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../config.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI) && HAS_BED_PROBE
+
+#include "screens.h"
+
+using namespace FTDI;
+using namespace ExtUI;
+using namespace Theme;
+
+void ZOffsetScreen::onRedraw(draw_mode_t what) {
+ widgets_t w(what);
+ w.precision(2, BaseNumericAdjustmentScreen::DEFAULT_MIDRANGE).units(PSTR("mm"));
+
+ w.heading( PSTR("Z Offset"));
+ w.color(z_axis).adjuster(4, PSTR("Z Offset:"), getZOffset_mm());
+ w.increments();
+}
+
+bool ZOffsetScreen::onTouchHeld(uint8_t tag) {
+ const float increment = getIncrement();
+ switch (tag) {
+ case 4: UI_DECREMENT(ZOffset_mm); break;
+ case 5: UI_INCREMENT(ZOffset_mm); break;
+ default:
+ return false;
+ }
+ SaveSettingsDialogBox::settingsChanged();
+ return true;
+}
+
+#endif // LULZBOT_TOUCH_UI && HAS_BED_PROBE
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bitmaps.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bitmaps.h
new file mode 100644
index 0000000000..da6188ab9d
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bitmaps.h
@@ -0,0 +1,181 @@
+/*************
+ * bitmaps.h *
+ *************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+namespace Theme {
+ using namespace FTDI;
+
+ constexpr PROGMEM bitmap_info_t Extruder_Icon_Info = {
+ .format = L1,
+ .linestride = 3,
+ .filter = BILINEAR,
+ .wrapx = BORDER,
+ .wrapy = BORDER,
+ .RAMG_offset = 8000,
+ .width = 24,
+ .height = 23,
+ };
+
+ constexpr PROGMEM unsigned char Extruder_Icon[] = {
+ 0x3F, 0xFF, 0xFC,
+ 0x7F, 0xFF, 0xFE,
+ 0xC0, 0x00, 0x03,
+ 0xC0, 0x00, 0x03,
+ 0xC0, 0x00, 0x03,
+ 0xC0, 0x00, 0x03,
+ 0x7F, 0xFF, 0xFE,
+ 0x3F, 0xFF, 0xFC,
+ 0x3F, 0xFF, 0xFC,
+ 0x7F, 0xFF, 0xFE,
+ 0xC0, 0x00, 0x03,
+ 0xC0, 0x00, 0x03,
+ 0xC0, 0x00, 0x03,
+ 0xC0, 0x00, 0x03,
+ 0x7F, 0xFF, 0xFE,
+ 0x7F, 0xFF, 0xFE,
+ 0x07, 0xFF, 0xE0,
+ 0x03, 0xFF, 0xC0,
+ 0x01, 0x81, 0x80,
+ 0x00, 0xC3, 0x00,
+ 0x00, 0x66, 0x00,
+ 0x00, 0x3C, 0x00,
+ 0x00, 0x3C, 0x00
+ };
+
+ constexpr PROGMEM bitmap_info_t Bed_Heat_Icon_Info = {
+ .format = L1,
+ .linestride = 4,
+ .filter = BILINEAR,
+ .wrapx = BORDER,
+ .wrapy = BORDER,
+ .RAMG_offset = 8100,
+ .width = 32,
+ .height = 23,
+ };
+
+ constexpr PROGMEM unsigned char Bed_Heat_Icon[] = {
+ 0x01, 0x81, 0x81, 0x80,
+ 0x01, 0x81, 0x81, 0x80,
+ 0x00, 0xC0, 0xC0, 0xC0,
+ 0x00, 0xC0, 0xC0, 0xC0,
+ 0x00, 0x60, 0x60, 0x60,
+ 0x00, 0x60, 0x60, 0x60,
+ 0x00, 0xC0, 0xC0, 0xC0,
+ 0x00, 0xC0, 0xC0, 0xC0,
+ 0x01, 0x81, 0x81, 0x80,
+ 0x01, 0x81, 0x81, 0x80,
+ 0x03, 0x03, 0x03, 0x00,
+ 0x03, 0x03, 0x03, 0x00,
+ 0x06, 0x06, 0x06, 0x00,
+ 0x06, 0x06, 0x06, 0x00,
+ 0x03, 0x03, 0x03, 0x00,
+ 0x03, 0x03, 0x03, 0x00,
+ 0x01, 0x81, 0x81, 0x80,
+ 0x01, 0x81, 0x81, 0x80,
+ 0x00, 0x00, 0x00, 0x00,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xC0, 0x00, 0x00, 0x03,
+ 0xFF, 0xFF, 0xFF, 0xFF
+ };
+
+ constexpr PROGMEM bitmap_info_t Fan_Icon_Info = {
+ .format = L1,
+ .linestride = 4,
+ .filter = BILINEAR,
+ .wrapx = BORDER,
+ .wrapy = BORDER,
+ .RAMG_offset = 8300,
+ .width = 32,
+ .height = 32,
+ };
+
+ constexpr PROGMEM unsigned char Fan_Icon[] = {
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xF8, 0x00, 0x00, 0x1F,
+ 0xF0, 0x03, 0xF8, 0x0F,
+ 0xE0, 0x07, 0xF0, 0x07,
+ 0xC0, 0x0F, 0xE0, 0x03,
+ 0xC0, 0x1F, 0xE0, 0x03,
+ 0xC0, 0x1F, 0xE0, 0x03,
+ 0xC0, 0x0F, 0xE0, 0x03,
+ 0xC0, 0x07, 0xE0, 0x03,
+ 0xC0, 0x03, 0xC0, 0x03,
+ 0xD0, 0x00, 0x00, 0xC3,
+ 0xD8, 0x03, 0xC1, 0xE3,
+ 0xDF, 0xC7, 0xE3, 0xF3,
+ 0xDF, 0xEF, 0xF7, 0xFB,
+ 0xDF, 0xEF, 0xF7, 0xFB,
+ 0xDF, 0xEF, 0xF7, 0xFB,
+ 0xDF, 0xEF, 0xF7, 0xFB,
+ 0xCF, 0xC7, 0xE3, 0xFB,
+ 0xC7, 0x83, 0xC0, 0x1B,
+ 0xC3, 0x00, 0x00, 0x0B,
+ 0xC0, 0x03, 0xC0, 0x03,
+ 0xC0, 0x07, 0xE0, 0x03,
+ 0xC0, 0x07, 0xF0, 0x03,
+ 0xC0, 0x07, 0xF8, 0x03,
+ 0xC0, 0x07, 0xF8, 0x03,
+ 0xC0, 0x07, 0xF0, 0x03,
+ 0xE0, 0x0F, 0xE0, 0x07,
+ 0xF0, 0x1F, 0xC0, 0x0F,
+ 0xF8, 0x00, 0x00, 0x1F,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF
+ };
+
+ constexpr PROGMEM bitmap_info_t TD_Icon_Info = {
+ .format = L1,
+ .linestride = 7,
+ .filter = BILINEAR,
+ .wrapx = BORDER,
+ .wrapy = BORDER,
+ .RAMG_offset = 9000,
+ .width = 50,
+ .height = 20,
+ };
+
+ constexpr PROGMEM unsigned char TD_Icon[] = {
+ 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, // Thumb Drive Widget
+ 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x03, 0x80,
+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xC0, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0xC0,
+ 0x00, 0x60, 0x00, 0x00, 0x00, 0x03, 0x80,
+ 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
+ 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00
+ };
+}; // namespace Theme
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_landscape.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_landscape.h
new file mode 100644
index 0000000000..8593c14e8b
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_landscape.h
@@ -0,0 +1,43 @@
+
+/****************************************************************************
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/**
+ * This file was auto-generated using "svg2cpp.pl"
+ *
+ * The encoding consists of x,y pairs with the min and max scaled to
+ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
+ * start of a new closed path.
+ */
+
+#pragma once
+
+constexpr float x_min = 0.000000;
+
+constexpr float x_max = 480.000000;
+
+constexpr float y_min = 0.000000;
+
+constexpr float y_max = 272.000000;
+
+const PROGMEM uint16_t logo_green[] = {0x7E30, 0x2358, 0x4C02, 0xBCAA, 0xB05C, 0xBCAA};
+
+const PROGMEM uint16_t logo_mark[] = {0xB1F2, 0xD5EE, 0xB146, 0xD62A, 0xB0B5, 0xD6D9, 0xB052, 0xD7DC, 0xB030, 0xD90B, 0xB052, 0xDA38, 0xB0B5, 0xDB3A, 0xB146, 0xDBE9, 0xB1F2, 0xDC22, 0xB29E, 0xDBE9, 0xB330, 0xDB3A, 0xB392, 0xDA3A, 0xB3B4, 0xD90B, 0xB392, 0xD7D9, 0xB330, 0xD6D9, 0xB29E, 0xD62A, 0xFFFF, 0xB1F2, 0xD56F, 0xB2B9, 0xD5B3, 0xB362, 0xD67F, 0xB3D4, 0xD7A9, 0xB3FB, 0xD90B, 0xB3D4, 0xDA68, 0xB362, 0xDB91, 0xB2B9, 0xDC5E, 0xB1F2, 0xDCA2, 0xB12B, 0xDC5E, 0xB082, 0xDB91, 0xB00E, 0xDA68, 0xAFE9, 0xD90B, 0xB00E, 0xD7A9, 0xB082, 0xD67F, 0xB12B, 0xD5B3, 0xFFFF, 0xB1DF, 0xD770, 0xB188, 0xD770, 0xB188, 0xD8C7, 0xB1DF, 0xD8C7, 0xB24A, 0xD8A2, 0xB269, 0xD81D, 0xB24A, 0xD798, 0xFFFF, 0xB1E3, 0xD6F0, 0xB29C, 0xD73A, 0xB2D9, 0xD81A, 0xB2B4, 0xD8CD, 0xB24C, 0xD925, 0xB274, 0xD960, 0xB2AD, 0xD9EB, 0xB30D, 0xDAFE, 0xB294, 0xDAFE, 0xB23A, 0xD9FC, 0xB1F7, 0xD966, 0xB1B6, 0xD944, 0xB188, 0xD944, 0xB188, 0xDAFE, 0xB11C, 0xDAFE, 0xB11C, 0xD6F0};
+
+const PROGMEM uint16_t logo_type[] = {0xB05D, 0xC9B7, 0xB042, 0xCA2D, 0xAFFF, 0xCA5F, 0xAD38, 0xCA5F, 0xACF5, 0xCA8B, 0xACD9, 0xCAFE, 0xACD9, 0xDBFC, 0xACC0, 0xDC74, 0xAC7F, 0xDCA5, 0xA9C8, 0xDCA5, 0xA984, 0xDC74, 0xA969, 0xDBFC, 0xA969, 0xCAFE, 0xA950, 0xCA8B, 0xA90F, 0xCA60, 0xA649, 0xCA60, 0xA605, 0xCA2E, 0xA5EA, 0xC9B8, 0xA5EA, 0xC52A, 0xA649, 0xC482, 0xAFFF, 0xC482, 0xB042, 0xC4B3, 0xB05D, 0xC52A, 0xFFFF, 0x99EB, 0xD6D1, 0x9E82, 0xD6D1, 0x9E82, 0xCA60, 0x99EB, 0xCA60, 0xFFFF, 0xA1D0, 0xC7F5, 0xA1EB, 0xC88B, 0xA1F8, 0xC92A, 0xA1F8, 0xD7FD, 0xA1EB, 0xD89C, 0xA1D0, 0xD933, 0xA004, 0xDC5E, 0x9FAC, 0xDC93, 0x9F50, 0xDCA5, 0x991E, 0xDCA5, 0x98C4, 0xDC93, 0x986F, 0xDC5E, 0x96A3, 0xD933, 0x9685, 0xD89C, 0x967B, 0xD7FD, 0x967B, 0xC92A, 0x9685, 0xC88B, 0x96A3, 0xC7F5, 0x986F, 0xC4C9, 0x98C4, 0xC498, 0x991E, 0xC482, 0x9F50, 0xC482, 0x9FAC, 0xC498, 0xA004, 0xC4C9, 0xFFFF, 0x8928, 0xD75F, 0x8E6A, 0xD75F, 0x8E6A, 0xD2AE, 0x8928, 0xD2AE, 0x8928, 0xD75F, 0xFFFF, 0x8928, 0xCE0F, 0x8E6A, 0xCE0F, 0x8E6A, 0xC9C0, 0x8928, 0xC9C0, 0xFFFF, 0x9162, 0xC7F5, 0x917D, 0xC88F, 0x918A, 0xC932, 0x918A, 0xCD06, 0x9178, 0xCDA1, 0x914D, 0xCE2A, 0x9077, 0xD00F, 0x9060, 0xD094, 0x907C, 0xD10F, 0x9149, 0xD2C9, 0x9176, 0xD352, 0x918A, 0xD3EC, 0x918A, 0xD7FD, 0x917D, 0xD89C, 0x9162, 0xD933, 0x8F96, 0xDC5E, 0x8F3E, 0xDC93, 0x8EE2, 0xDCA5, 0x866C, 0xDCA5, 0x860D, 0xDBFC, 0x860D, 0xC52A, 0x8628, 0xC4B3, 0x866C, 0xC482, 0x8EE2, 0xC482, 0x8F3E, 0xC498, 0x8F96, 0xC4C9, 0xFFFF, 0x80FE, 0xC983, 0x80E9, 0xCA19, 0x80BD, 0xCA9D, 0x7A63, 0xD73B, 0x809F, 0xD73B, 0x80E2, 0xD76C, 0x80FE, 0xD7E3, 0x80FE, 0xDBFC, 0x80E2, 0xDC74, 0x809F, 0xDCA5, 0x76E9, 0xDCA5, 0x768A, 0xDBFC, 0x768A, 0xD7AD, 0x769B, 0xD713, 0x76C6, 0xD68B, 0x7D42, 0xC9EC, 0x7707, 0xC9EC, 0x76C4, 0xC9BB, 0x76A8, 0xC945, 0x76A8, 0xC52A, 0x76C4, 0xC4B3, 0x7707, 0xC482, 0x809F, 0xC482, 0x80E2, 0xC4B3, 0x80FE, 0xC52A, 0xFFFF, 0x725C, 0xD6C8, 0x729D, 0xD6F9, 0x72B6, 0xD770, 0x72B6, 0xDBFC, 0x729D, 0xDC74, 0x725C, 0xDCA5, 0x69EB, 0xDCA5, 0x698C, 0xDBFC, 0x698C, 0xC52A, 0x69EB, 0xC482, 0x6C9D, 0xC482, 0x6CFD, 0xC52A, 0x6CFD, 0xD62A, 0x6D18, 0xD69C, 0x6D5B, 0xD6C8, 0xFFFF, 0x6466, 0xC4B3, 0x6482, 0xC52A, 0x6482, 0xD818, 0x647D, 0xD818, 0x6473, 0xD8AE, 0x645A, 0xD933, 0x628E, 0xDC5E, 0x6236, 0xDC93, 0x61D9, 0xDCA5, 0x5BA8, 0xDCA5, 0x5B4E, 0xDC93, 0x5AF9, 0xDC5E, 0x592D, 0xD933, 0x590F, 0xD89C, 0x5905, 0xD7FD, 0x5905, 0xC52A, 0x5921, 0xC4B3, 0x5964, 0xC482, 0x5C16, 0xC482, 0x5C5A, 0xC4B3, 0x5C76, 0xC52A, 0x5C76, 0xD62A, 0x5C91, 0xD6A0, 0x5CD4, 0xD6D1, 0x60B3, 0xD6D1, 0x60F4, 0xD6A0, 0x610D, 0xD62A, 0x610D, 0xC52A, 0x6128, 0xC4B3, 0x616C, 0xC482, 0x6423, 0xC482, 0xFFFF, 0x54D2, 0xD6C8, 0x5513, 0xD6F9, 0x552C, 0xD770, 0x552C, 0xDBFD, 0x5513, 0xDC74, 0x54D2, 0xDCA5, 0x4C62, 0xDCA5, 0x4C02, 0xDBFD, 0x4C02, 0xC52A, 0x4C62, 0xC482, 0x4F14, 0xC482, 0x4F73, 0xC52A, 0x4F73, 0xD62A, 0x4F8E, 0xD69C, 0x4FD2, 0xD6C8};
+
+const PROGMEM uint16_t logo_black[] = {0x7E30, 0x37DF, 0x842F, 0x4A34, 0x7830, 0x4A34, 0xFFFF, 0x7E30, 0x336E, 0x7602, 0x4C6C, 0x865E, 0x4C6C, 0x7E30, 0x336E, 0xFFFF, 0x5C26, 0xA020, 0x6225, 0xB275, 0x5626, 0xB275, 0xFFFF, 0x5C26, 0x9BAF, 0x53F8, 0xB4AE, 0x6453, 0xB4AE, 0xFFFF, 0xA02A, 0xA020, 0xA629, 0xB275, 0x9A2A, 0xB275, 0xFFFF, 0xA02A, 0x9BAF, 0x97FC, 0xB4AE, 0xA857, 0xB4AE, 0xFFFF, 0x7E2E, 0x5CEA, 0x7DB3, 0x5D3D, 0x7D3E, 0x5EF3, 0x7C7D, 0x613A, 0x7B56, 0x6244, 0x7A14, 0x61C8, 0x7903, 0x5FEC, 0x7850, 0x5E78, 0x77CE, 0x5E60, 0x7764, 0x5EE8, 0x7734, 0x60C6, 0x76D0, 0x6353, 0x75DA, 0x64DA, 0x7490, 0x64F7, 0x733F, 0x639E, 0x7258, 0x6281, 0x71D6, 0x62A5, 0x7184, 0x6359, 0x71A0, 0x6545, 0x71A3, 0x67F2, 0x70EF, 0x69DB, 0x6FB4, 0x6A8D, 0x6E36, 0x69CC, 0x6D27, 0x6913, 0x6CAF, 0x6970, 0x6C7A, 0x6A43, 0x6CE3, 0x6C21, 0x6D50, 0x6EC4, 0x6CEB, 0x70EF, 0x6BD5, 0x722C, 0x6A51, 0x7225, 0x693A, 0x71F5, 0x68D4, 0x7286, 0x68C0, 0x736A, 0x6961, 0x7502, 0x6A24, 0x7756, 0x6A13, 0x799D, 0x6936, 0x7B4C, 0x67C3, 0x7BFC, 0x66B4, 0x7C51, 0x6667, 0x7D0B, 0x6674, 0x7DF1, 0x6747, 0x7F2D, 0x6855, 0x810F, 0x689A, 0x8349, 0x6803, 0x8550, 0x66B9, 0x86A5, 0x65C0, 0x8773, 0x6592, 0x884B, 0x65C0, 0x8922, 0x66B9, 0x89F3, 0x6803, 0x8B47, 0x689A, 0x8D4F, 0x6854, 0x8F89, 0x6745, 0x916A, 0x6673, 0x92A5, 0x6665, 0x938B, 0x66B2, 0x9446, 0x67C1, 0x949C, 0x6933, 0x954B, 0x6A11, 0x96FC, 0x6A21, 0x9943, 0x695E, 0x9B96, 0x68BC, 0x9D2E, 0x68D0, 0x9E13, 0x6936, 0x9EA3, 0x6A4E, 0x9E74, 0x6BD1, 0x9E6D, 0x6CE7, 0x9FAA, 0x6D4C, 0xA1D6, 0x6CDE, 0xA479, 0x6C75, 0xA657, 0x6CAA, 0xA72A, 0x6D21, 0xA788, 0x6E31, 0xA6CF, 0x6FAF, 0xA60E, 0x70EA, 0xA6C1, 0x719D, 0xA8AC, 0x7199, 0xAB57, 0x717D, 0xAD44, 0x71D0, 0xADF8, 0x7251, 0xAE1C, 0x7339, 0xACFF, 0x748A, 0xABA7, 0x75D4, 0xABC5, 0x76C9, 0xAD4D, 0x772D, 0xAFDA, 0x775D, 0xB1B9, 0x77C7, 0xB240, 0x7848, 0xB228, 0x78FC, 0xB0B5, 0x7A0D, 0xAED8, 0x7B50, 0xAE5F, 0x7C76, 0xAF69, 0x7D37, 0xB1B0, 0x7DAC, 0xB366, 0x7E26, 0xB3BA, 0x7EA0, 0xB367, 0x7F16, 0xB1B0, 0x7FD7, 0xAF69, 0x80FE, 0xAE60, 0x8240, 0xAEDB, 0x8351, 0xB0B8, 0x8404, 0xB22B, 0x8486, 0xB244, 0x84F0, 0xB1BD, 0x8521, 0xAFDE, 0x8584, 0xAD51, 0x867A, 0xABC9, 0x87C4, 0xABAD, 0x8915, 0xAD05, 0x89FD, 0xAE22, 0x8A7D, 0xADFF, 0x8AD0, 0xAD4C, 0x8AB5, 0xAB5E, 0x8AB1, 0xA8B2, 0x8B65, 0xA6C8, 0x8CA0, 0xA616, 0x8E1E, 0xA6D9, 0x8F2D, 0xA792, 0x8FA5, 0xA733, 0x8FDA, 0xA661, 0x8F71, 0xA481, 0x8F04, 0xA1DF, 0x8F69, 0x9FB4, 0x907F, 0x9E78, 0x9203, 0x9E7E, 0x931A, 0x9EB0, 0x9380, 0x9E1E, 0x9394, 0x9D3A, 0x92F3, 0x9BA1, 0x9230, 0x994E, 0x9241, 0x9707, 0x931F, 0x9557, 0x9491, 0x94A7, 0x95A0, 0x9452, 0x95ED, 0x9398, 0x95DF, 0x92B3, 0x950D, 0x9176, 0x93FF, 0x8F94, 0x93BA, 0x8D5A, 0x9451, 0x8B53, 0x959B, 0x89FF, 0x9693, 0x8930, 0x96C3, 0x8859, 0x9693, 0x8781, 0x959B, 0x86B2, 0x9451, 0x855C, 0x93BA, 0x8355, 0x9400, 0x811B, 0x950F, 0x7F3A, 0x95E1, 0x7DFF, 0x95EF, 0x7D19, 0x95A2, 0x7C5E, 0x9493, 0x7C09, 0x9321, 0x7B58, 0x9243, 0x79A7, 0x9233, 0x7760, 0x92F6, 0x750D, 0x9397, 0x7375, 0x9383, 0x7291, 0x931E, 0x7200, 0x9207, 0x7230, 0x9083, 0x7236, 0x8F6D, 0x70F9, 0x8F08, 0x6ECE, 0x8F76, 0x6C2C, 0x8FDF, 0x6A4D, 0x8FAA, 0x697A, 0x8F33, 0x691C, 0x8E23, 0x69D5, 0x8CA5, 0x6A96, 0x8B6A, 0x69E3, 0x8AB7, 0x67F9, 0x8ABB, 0x654C, 0x8AD6, 0x635F, 0x8A84, 0x62AB, 0x8A03, 0x6287, 0x891C, 0x63A5, 0x87CA, 0x64FC, 0x8680, 0x64DF, 0x858B, 0x6358, 0x8527, 0x60CA, 0x84F7, 0x5EEB, 0x848E, 0x5E62, 0x840B, 0x5E7B, 0x8358, 0x5FEE, 0x8247, 0x61CB, 0x8104, 0x6246, 0x7FDE, 0x613B, 0x7F1E, 0x5EF4, 0x7EA8, 0x5D3E, 0x7E2E, 0x5CEA, 0x7E2E, 0x5CEA, 0xFFFF, 0x7E2F, 0x627C, 0x7F09, 0x631B, 0x7F64, 0x649C, 0x7F09, 0x661D, 0x7E2F, 0x66BC, 0x7D55, 0x661D, 0x7CFB, 0x649C, 0x7D55, 0x631B, 0x7E2F, 0x627C, 0x7E2F, 0x627C, 0xFFFF, 0x7E2A, 0x689C, 0x81B4, 0x6938, 0x850D, 0x6B02, 0x8823, 0x6DEA, 0x8AE0, 0x71E3, 0x8D2D, 0x76DC, 0x8ED1, 0x7C60, 0x8FCE, 0x8242, 0x9022, 0x8852, 0x8FCD, 0x8E62, 0x8ED1, 0x9443, 0x8D2C, 0x99C7, 0x8ADF, 0x9EC0, 0x8822, 0xA2BA, 0x850D, 0xA5A2, 0x81B3, 0xA76C, 0x7E2A, 0xA807, 0x7AA0, 0xA76C, 0x7747, 0xA5A2, 0x7431, 0xA2BA, 0x7174, 0x9EC0, 0x6F34, 0x99EB, 0x6D8E, 0x947A, 0x6C8B, 0x8E91, 0x6C32, 0x8852, 0x6C8A, 0x8214, 0x6D8D, 0x7C2B, 0x6F33, 0x76BA, 0x7174, 0x71E4, 0x7431, 0x6DEA, 0x7747, 0x6B02, 0x7AA0, 0x6938, 0x7E2A, 0x689C, 0x7E2A, 0x689C, 0xFFFF, 0x7E2A, 0x69AA, 0x7AD3, 0x6A3B, 0x779F, 0x6BE9, 0x748F, 0x6EC1, 0x71E0, 0x72A3, 0x6FA7, 0x7771, 0x6E11, 0x7CC6, 0x6D1D, 0x8276, 0x6CCB, 0x8852, 0x6D1D, 0x8E2F, 0x6E11, 0x93DE, 0x6FA7, 0x9933, 0x71E0, 0x9E02, 0x748F, 0xA1E3, 0x779F, 0xA4BC, 0x7AD3, 0xA669, 0x7E2A, 0xA6F9, 0x7E2A, 0xA6F9, 0x8180, 0xA669, 0x84B5, 0xA4BC, 0x87C4, 0xA1E3, 0x8A73, 0x9E01, 0x8CA7, 0x9944, 0x8E44, 0x93DE, 0x8F37, 0x8E36, 0x8F89, 0x8852, 0x8F37, 0x826E, 0x8E44, 0x7CC6, 0x8CA7, 0x7760, 0x8A74, 0x72A3, 0x87C4, 0x6EC1, 0x84B5, 0x6BE9, 0x8180, 0x6A3B, 0x7E2A, 0x69AA, 0x7E2A, 0x69AA, 0xFFFF, 0x7E71, 0x6BAF, 0x7E6A, 0x6F39, 0x7DE7, 0x6F3A, 0x7DDE, 0x6BB1, 0x7E71, 0x6BAF, 0x7E71, 0x6BAF, 0xFFFF, 0x802D, 0x6BE7, 0x80C0, 0x6C0B, 0x806E, 0x6F89, 0x7FEE, 0x6F69, 0xFFFF, 0x7C22, 0x6BE9, 0x7C62, 0x6F6C, 0x7BE2, 0x6F8C, 0x7B90, 0x6C0E, 0x7C22, 0x6BE9, 0x7C22, 0x6BE9, 0xFFFF, 0x8272, 0x6CB0, 0x8300, 0x6CFA, 0x8268, 0x705B, 0x81EC, 0x701B, 0xFFFF, 0x79DD, 0x6CB4, 0x7A65, 0x701E, 0x79E8, 0x705E, 0x794F, 0x6CFE, 0x79DD, 0x6CB4, 0x79DD, 0x6CB4, 0xFFFF, 0x6FDC, 0x6CEB, 0x70B6, 0x6D8C, 0x7110, 0x6F0D, 0x70B6, 0x708E, 0x6FDC, 0x712D, 0x6F02, 0x708E, 0x6EA8, 0x6F0C, 0x6F02, 0x6D8A, 0x6FDC, 0x6CEB, 0x6FDC, 0x6CEB, 0xFFFF, 0x8C82, 0x6CEF, 0x8D5C, 0x6D8E, 0x8DB6, 0x6F0F, 0x8D5C, 0x7091, 0x8C82, 0x7131, 0x8BA8, 0x7091, 0x8B4E, 0x6F10, 0x8BA8, 0x6D90, 0x8C82, 0x6CEF, 0x8C82, 0x6CEF, 0xFFFF, 0x84A1, 0x6E0A, 0x8528, 0x6E76, 0x844B, 0x71A8, 0x83D5, 0x7149, 0x84A1, 0x6E0A, 0xFFFF, 0x77AF, 0x6E0F, 0x787A, 0x714F, 0x7804, 0x71AD, 0x7727, 0x6E7B, 0x77AF, 0x6E0F, 0x77AF, 0x6E0F, 0xFFFF, 0x86AF, 0x6FEE, 0x872B, 0x707A, 0x860F, 0x736D, 0x85A1, 0x72F1, 0x86AF, 0x6FEE, 0xFFFF, 0x75A0, 0x6FF3, 0x76AE, 0x72F6, 0x7640, 0x7372, 0x7523, 0x7081, 0x75A0, 0x6FF3, 0x75A0, 0x6FF3, 0xFFFF, 0x7E2A, 0x7132, 0x8330, 0x72F1, 0x876F, 0x77F6, 0x8A47, 0x7F75, 0x8B45, 0x8852, 0x8A47, 0x912F, 0x876F, 0x98AF, 0x8330, 0x9DB3, 0x7E2A, 0x9F72, 0x7924, 0x9DB3, 0x74E5, 0x98AF, 0x720D, 0x912F, 0x710F, 0x8852, 0x720C, 0x7F75, 0x74E5, 0x77F7, 0x7924, 0x72F1, 0x7E2A, 0x7132, 0x7E2A, 0x7132, 0xFFFF, 0x7E2A, 0x7240, 0x795F, 0x73EB, 0x7551, 0x78B5, 0x729A, 0x7FDD, 0x71A8, 0x8852, 0x729A, 0x90C8, 0x7551, 0x97EF, 0x795F, 0x9CB9, 0x7E2A, 0x9E64, 0x82F5, 0x9CBA, 0x8703, 0x97EF, 0x89BA, 0x90C8, 0x8AAC, 0x8852, 0x89BA, 0x7FDD, 0x8703, 0x78B5, 0x82F5, 0x73EB, 0x7E2A, 0x7240, 0x7E2A, 0x7240, 0xFFFF, 0x8892, 0x7253, 0x88FF, 0x72FC, 0x87A9, 0x759E, 0x874B, 0x750F, 0x87EB, 0x73AD, 0xFFFF, 0x73BF, 0x7258, 0x7509, 0x750F, 0x74A6, 0x75A5, 0x734F, 0x7305, 0x73BF, 0x7258, 0x73BF, 0x7258, 0xFFFF, 0x8A3B, 0x7525, 0x8A9C, 0x75EC, 0x8912, 0x7831, 0x88BE, 0x7784, 0xFFFF, 0x7215, 0x752F, 0x7393, 0x778C, 0x7340, 0x7836, 0x7337, 0x7847, 0x72A7, 0x775B, 0x71B4, 0x75F5, 0x71B6, 0x75F0, 0x7215, 0x752F, 0x7215, 0x752F, 0xFFFF, 0x8BA7, 0x785E, 0x8BF8, 0x793B, 0x8A43, 0x7B17, 0x89FC, 0x7A56, 0xFFFF, 0x70AA, 0x7867, 0x7254, 0x7A5F, 0x720E, 0x7B20, 0x7059, 0x7943, 0x70AA, 0x7867, 0x70AA, 0x7867, 0xFFFF, 0x8CCD, 0x7BEB, 0x8D0A, 0x7CDA, 0x8B34, 0x7E44, 0x8AFE, 0x7D72, 0x8CCD, 0x7BEB, 0xFFFF, 0x6F84, 0x7BF4, 0x7154, 0x7D7B, 0x711D, 0x7E4C, 0x6F47, 0x7CE3, 0x6F84, 0x7BF4, 0x6F84, 0x7BF4, 0xFFFF, 0x8DA6, 0x7FB9, 0x8DD0, 0x80B5, 0x8BE0, 0x81A3, 0x8BBC, 0x80C8, 0xFFFF, 0x6EAB, 0x7FC2, 0x7096, 0x80D0, 0x7071, 0x81AB, 0x6E82, 0x80BD, 0x6EAB, 0x7FC2, 0x6EAB, 0x7FC2, 0xFFFF, 0x8E2E, 0x83B2, 0x8E44, 0x84B6, 0x8C46, 0x8528, 0x8C33, 0x8445, 0xFFFF, 0x6E24, 0x83BC, 0x701F, 0x844B, 0x700D, 0x852D, 0x6E0F, 0x84BF, 0x6E24, 0x83BC, 0x6E24, 0x83BC, 0xFFFF, 0x69ED, 0x862F, 0x6AC7, 0x86CE, 0x6B22, 0x884F, 0x6AC7, 0x89D0, 0x69ED, 0x8A6F, 0x69EC, 0x8A6F, 0x6913, 0x89CF, 0x68B9, 0x884E, 0x6913, 0x86CE, 0x69ED, 0x862F, 0x69ED, 0x862F, 0xFFFF, 0x926F, 0x8634, 0x9349, 0x86D2, 0x93A3, 0x8852, 0x93A3, 0x8855, 0x9349, 0x89D5, 0x926F, 0x8A75, 0x9195, 0x89D6, 0x913A, 0x8855, 0x9194, 0x86D4, 0x926F, 0x8634, 0x926F, 0x8634, 0xFFFF, 0x8E64, 0x87C3, 0x8E64, 0x88CA, 0x8C63, 0x88BB, 0x8C63, 0x87D7, 0xFFFF, 0x6DF1, 0x87CB, 0x6FF2, 0x87DC, 0x6FF2, 0x88C2, 0x6DF1, 0x88D2, 0x6DF1, 0x87CB, 0x6DF1, 0x87CB, 0xFFFF, 0x8C48, 0x8B69, 0x8E45, 0x8BD8, 0x8E31, 0x8CD9, 0x8C36, 0x8C4D, 0x8C48, 0x8B69, 0x8C48, 0x8B69, 0xFFFF, 0x700D, 0x8B6F, 0x7020, 0x8C52, 0x6E25, 0x8CE3, 0x6E10, 0x8BDF, 0xFFFF, 0x8BE4, 0x8EEC, 0x8DD4, 0x8FDA, 0x8DAA, 0x90D4, 0x8BC1, 0x8FC9, 0x8BE4, 0x8EEC, 0x8BE4, 0x8EEC, 0xFFFF, 0x7072, 0x8EF4, 0x7096, 0x8FCF, 0x6EAC, 0x90DD, 0x6E82, 0x8FE1, 0xFFFF, 0x8B39, 0x924D, 0x8D10, 0x93B4, 0x8CD3, 0x94A3, 0x8B04, 0x931C, 0x8B39, 0x924D, 0x8B39, 0x924D, 0xFFFF, 0x711E, 0x9255, 0x7154, 0x9326, 0x6F84, 0x94AB, 0x6F47, 0x93BC, 0xFFFF, 0x8A49, 0x9578, 0x8BFE, 0x9754, 0x8BAE, 0x9830, 0x8A03, 0x9639, 0x8A49, 0x9578, 0x8A49, 0x9578, 0xFFFF, 0x720E, 0x9582, 0x7254, 0x9643, 0x70A9, 0x983A, 0x7059, 0x975C, 0x720E, 0x9582, 0xFFFF, 0x733E, 0x986A, 0x7393, 0x9916, 0x7215, 0x9B75, 0x71B4, 0x9AAF, 0xFFFF, 0x8914, 0x986E, 0x8AA6, 0x9AA3, 0x8AA2, 0x9AAB, 0x8A44, 0x9B6B, 0x88C5, 0x990F, 0x8914, 0x986E, 0x8914, 0x986E, 0xFFFF, 0x87B2, 0x9AF6, 0x890A, 0x9D97, 0x889B, 0x9E43, 0x8750, 0x9B8E, 0x87B2, 0x9AF6, 0x87B2, 0x9AF6, 0xFFFF, 0x74A6, 0x9AFD, 0x7509, 0x9B94, 0x7514, 0x9BA4, 0x73C9, 0x9E57, 0x73C2, 0x9E4F, 0x7350, 0x9D9F, 0xFFFF, 0x8619, 0x9D2B, 0x8737, 0xA01B, 0x86B9, 0xA0A9, 0x85AB, 0x9DA7, 0x8619, 0x9D2B, 0x8619, 0x9D2B, 0xFFFF, 0x764A, 0x9D3C, 0x76B8, 0x9DB7, 0x75AB, 0xA0BC, 0x752F, 0xA02F, 0xFFFF, 0x8456, 0x9EF1, 0x8533, 0xA222, 0x84AC, 0xA28F, 0x83DF, 0x9F50, 0x8456, 0x9EF1, 0x8456, 0x9EF1, 0xFFFF, 0x780E, 0x9F00, 0x7885, 0x9F5E, 0x77B9, 0xA29E, 0x7732, 0xA233, 0xFFFF, 0x6FD5, 0x9F77, 0x70AF, 0xA018, 0x70B4, 0xA021, 0x70B9, 0xA02A, 0x7114, 0xA1AA, 0x70BA, 0xA32C, 0x6FDF, 0xA3CB, 0x6F05, 0xA32D, 0x6F02, 0xA326, 0x6EFA, 0xA319, 0x6EFB, 0xA319, 0x6EA0, 0xA197, 0x6EFB, 0xA016, 0x6FD5, 0x9F77, 0x6FD5, 0x9F77, 0xFFFF, 0x8C85, 0x9F7B, 0x8D5F, 0xA01B, 0x8DBA, 0xA19C, 0x8D60, 0xA31D, 0x8C85, 0xA3BC, 0x8BAC, 0xA31D, 0x8B51, 0xA19C, 0x8BAB, 0xA01B, 0x8C85, 0x9F7B, 0x8C85, 0x9F7B, 0xFFFF, 0x8272, 0xA041, 0x830C, 0xA3A2, 0x827E, 0xA3EB, 0x81F5, 0xA082, 0x8272, 0xA041, 0x8272, 0xA041, 0xFFFF, 0x79F2, 0xA04C, 0x7A6F, 0xA08B, 0x79E9, 0xA3F6, 0x795A, 0xA3AE, 0xFFFF, 0x8079, 0xA115, 0x80CB, 0xA493, 0x8039, 0xA4B8, 0x7FF7, 0xA136, 0x8079, 0xA115, 0x8079, 0xA115, 0xFFFF, 0x7BEC, 0xA11B, 0x7C6C, 0xA13A, 0x7C2E, 0xA4BE, 0x7B9C, 0xA499, 0x7BEC, 0xA11B, 0xFFFF, 0x7E73, 0xA169, 0x7E7E, 0xA4F2, 0x7DEA, 0xA4F3, 0x7DF1, 0xA169, 0x7E73, 0xA169, 0x7E73, 0xA169, 0xFFFF, 0x7E34, 0xA9F6, 0x7F0E, 0xAA93, 0x7F69, 0xAC14, 0x7F0F, 0xAD96, 0x7E35, 0xAE37, 0x7D5A, 0xAD98, 0x7CFF, 0xAC16, 0x7D59, 0xAA95, 0x7E34, 0xA9F6, 0x7E34, 0xA9F6, 0xFFFF, 0x7E30, 0x2358, 0x4C02, 0xBCAA, 0xB05C, 0xBCAA, 0xFFFF, 0x7E30, 0x2C0E, 0x8A08, 0x503F, 0x7258, 0x503F, 0xFFFF, 0x70E4, 0x54AE, 0x8B7C, 0x54AE, 0x9EBD, 0x8F88, 0x916B, 0xB83A, 0x6ACF, 0xB83A, 0x5D90, 0x8FBE, 0x70E4, 0x54AE, 0xFFFF, 0xA02A, 0x93E3, 0xAC0F, 0xB83A, 0x9446, 0xB83A, 0xFFFF, 0x5C23, 0x941A, 0x67F5, 0xB83A, 0x5050, 0xB83A, 0x5C23, 0x941A};
+
+const PROGMEM uint16_t logo_white[] = {0x7E72, 0x6BAF, 0x7E6A, 0x6F39, 0x7DE7, 0x6F3A, 0x7DDE, 0x6BB1, 0x7E72, 0x6BAF, 0xFFFF, 0x802D, 0x6BE7, 0x80C0, 0x6C0B, 0x806E, 0x6F8A, 0x7FEE, 0x6F69, 0xFFFF, 0x7C22, 0x6BE9, 0x7C62, 0x6F6C, 0x7BE2, 0x6F8C, 0x7B90, 0x6C0E, 0x7C22, 0x6BE9, 0x7C22, 0x6BE9, 0xFFFF, 0x8272, 0x6CB0, 0x8300, 0x6CFA, 0x8268, 0x705B, 0x81EC, 0x701B, 0xFFFF, 0x79DD, 0x6CB4, 0x7A65, 0x701E, 0x79E8, 0x705E, 0x794F, 0x6CFE, 0x79DD, 0x6CB4, 0x79DD, 0x6CB4, 0xFFFF, 0x84A1, 0x6E0A, 0x8528, 0x6E76, 0x844B, 0x71A8, 0x83D6, 0x7149, 0xFFFF, 0x77AF, 0x6E0F, 0x787A, 0x714F, 0x7804, 0x71AD, 0x7727, 0x6E7B, 0x77AF, 0x6E0F, 0x77AF, 0x6E0F, 0xFFFF, 0x86AF, 0x6FEE, 0x872C, 0x707A, 0x860F, 0x736D, 0x85A1, 0x72F1, 0xFFFF, 0x75A0, 0x6FF3, 0x76AE, 0x72F6, 0x7641, 0x7372, 0x7523, 0x7081, 0x75A0, 0x6FF3, 0x75A0, 0x6FF3, 0xFFFF, 0x8892, 0x7253, 0x88FF, 0x72FC, 0x87A9, 0x759E, 0x874B, 0x750F, 0xFFFF, 0x73BF, 0x7258, 0x7509, 0x750F, 0x74A6, 0x75A5, 0x734F, 0x7305, 0x73BF, 0x7258, 0x73BF, 0x7258, 0xFFFF, 0x8A3B, 0x7525, 0x8A9C, 0x75EC, 0x8912, 0x7831, 0x88BE, 0x7784, 0xFFFF, 0x7215, 0x752F, 0x7393, 0x778C, 0x7340, 0x7836, 0x71B4, 0x75F5, 0x7215, 0x752F, 0xFFFF, 0x8BA7, 0x785E, 0x8BF8, 0x793B, 0x8A43, 0x7B17, 0x89FC, 0x7A56, 0xFFFF, 0x70AA, 0x7867, 0x7254, 0x7A5F, 0x720E, 0x7B20, 0x7059, 0x7943, 0x70AA, 0x7867, 0x70AA, 0x7867, 0xFFFF, 0x8CCD, 0x7BEB, 0x8D0A, 0x7CDA, 0x8B34, 0x7E44, 0x8AFE, 0x7D72, 0xFFFF, 0x6F84, 0x7BF4, 0x7154, 0x7D7B, 0x711D, 0x7E4C, 0x6F47, 0x7CE3, 0x6F84, 0x7BF4, 0x6F84, 0x7BF4, 0xFFFF, 0x8DA6, 0x7FB9, 0x8DD0, 0x80B5, 0x8BE0, 0x81A3, 0x8BBC, 0x80C8, 0xFFFF, 0x6EAB, 0x7FC3, 0x7096, 0x80D0, 0x7071, 0x81AB, 0x6E82, 0x80BD, 0x6EAB, 0x7FC3, 0x6EAB, 0x7FC3, 0xFFFF, 0x8E2E, 0x83B2, 0x8E44, 0x84B6, 0x8C46, 0x8528, 0x8C33, 0x8445, 0xFFFF, 0x6E24, 0x83BC, 0x701F, 0x844B, 0x700D, 0x852D, 0x6E0F, 0x84BF, 0x6E24, 0x83BC, 0x6E24, 0x83BC, 0xFFFF, 0x8E64, 0x87C3, 0x8E64, 0x88CA, 0x8C63, 0x88BB, 0x8C63, 0x87D7, 0xFFFF, 0x6DF1, 0x87CB, 0x6FF2, 0x87DC, 0x6FF2, 0x88C2, 0x6DF1, 0x88D3, 0x6DF1, 0x87CB, 0xFFFF, 0x8C48, 0x8B69, 0x8E45, 0x8BD8, 0x8E31, 0x8CD9, 0x8C36, 0x8C4D, 0x8C48, 0x8B69, 0x8C48, 0x8B69, 0xFFFF, 0x700D, 0x8B70, 0x7020, 0x8C52, 0x6E25, 0x8CE3, 0x6E10, 0x8BE0, 0xFFFF, 0x8BE4, 0x8EEC, 0x8DD4, 0x8FDA, 0x8DAA, 0x90D4, 0x8BC0, 0x8FC9, 0x8BE4, 0x8EEC, 0xFFFF, 0x7072, 0x8EF4, 0x7096, 0x8FD0, 0x6EAC, 0x90DD, 0x6E82, 0x8FE1, 0xFFFF, 0x8B39, 0x924D, 0x8D10, 0x93B4, 0x8CD3, 0x94A3, 0x8B04, 0x931D, 0x8B39, 0x924D, 0x8B39, 0x924D, 0xFFFF, 0x711E, 0x9255, 0x7154, 0x9326, 0x6F84, 0x94AB, 0x6F47, 0x93BC, 0xFFFF, 0x8A49, 0x9579, 0x8BFE, 0x9754, 0x8BAE, 0x9830, 0x8A03, 0x9639, 0x8A49, 0x9579, 0x8A49, 0x9579, 0xFFFF, 0x720E, 0x9582, 0x7254, 0x9644, 0x70A9, 0x983A, 0x7059, 0x975C, 0xFFFF, 0x733D, 0x986A, 0x7393, 0x9916, 0x7215, 0x9B75, 0x71B4, 0x9AAF, 0xFFFF, 0x8914, 0x986E, 0x8AA6, 0x9AA3, 0x8A44, 0x9B6B, 0x88C5, 0x990F, 0x8914, 0x986E, 0xFFFF, 0x87B2, 0x9AF6, 0x890A, 0x9D97, 0x889B, 0x9E43, 0x8750, 0x9B8E, 0x87B2, 0x9AF6, 0x87B2, 0x9AF6, 0xFFFF, 0x74A6, 0x9AFD, 0x7509, 0x9B94, 0x73C9, 0x9E57, 0x7350, 0x9DA0, 0xFFFF, 0x8619, 0x9D2B, 0x8737, 0xA01B, 0x86B9, 0xA0A9, 0x85AB, 0x9DA7, 0x8619, 0x9D2B, 0x8619, 0x9D2B, 0xFFFF, 0x764A, 0x9D3C, 0x76B8, 0x9DB7, 0x75AB, 0xA0BC, 0x752E, 0xA02F, 0xFFFF, 0x8455, 0x9EF1, 0x8533, 0xA222, 0x84AC, 0xA28F, 0x83DF, 0x9F50, 0x8455, 0x9EF1, 0x8455, 0x9EF1, 0xFFFF, 0x780E, 0x9F00, 0x7885, 0x9F5E, 0x77B9, 0xA29E, 0x7732, 0xA233, 0xFFFF, 0x8272, 0xA041, 0x830C, 0xA3A2, 0x827D, 0xA3EC, 0x81F5, 0xA082, 0x8272, 0xA041, 0x8272, 0xA041, 0xFFFF, 0x79F2, 0xA04D, 0x7A6E, 0xA08C, 0x79E9, 0xA3F6, 0x795A, 0xA3AE, 0xFFFF, 0x8079, 0xA115, 0x80CB, 0xA493, 0x8039, 0xA4B9, 0x7FF7, 0xA136, 0x8079, 0xA115, 0x8079, 0xA115, 0xFFFF, 0x7BEC, 0xA11B, 0x7C6C, 0xA13A, 0x7C2E, 0xA4BE, 0x7B9C, 0xA499, 0xFFFF, 0x7E73, 0xA169, 0x7E7E, 0xA4F2, 0x7DE9, 0xA4F3, 0x7DF1, 0xA169, 0x7E73, 0xA169, 0xFFFF, 0x7F6C, 0x7644, 0x801D, 0x768B, 0x8069, 0x76D5, 0x80AE, 0x7739, 0x8102, 0x785D, 0x80E7, 0x799A, 0x807D, 0x7A8F, 0x7FD8, 0x7B0A, 0x7FC8, 0x7AFB, 0x7FA3, 0x7ABE, 0x7FCB, 0x7A6B, 0x7FE9, 0x7A54, 0x803C, 0x7A0A, 0x8084, 0x7950, 0x8090, 0x787F, 0x8057, 0x77D1, 0x8021, 0x778E, 0x7FE8, 0x775E, 0x7F71, 0x773A, 0x7F02, 0x777C, 0x7ECF, 0x77C4, 0x7EAC, 0x780F, 0x7E89, 0x7880, 0x7E77, 0x78DA, 0x7E6F, 0x79A6, 0x7E7D, 0x79F6, 0x7E9C, 0x7A3A, 0x7F0C, 0x7AD3, 0x8002, 0x7C03, 0x8084, 0x7CC0, 0x80B8, 0x7D14, 0x80F6, 0x7D99, 0x8135, 0x7EE9, 0x812D, 0x8036, 0x8103, 0x8165, 0x80C6, 0x8280, 0x8087, 0x8371, 0x806C, 0x8452, 0x810C, 0x8410, 0x8154, 0x839E, 0x8206, 0x823F, 0x827D, 0x80B4, 0x8297, 0x8003, 0x82CD, 0x7E19, 0x82F5, 0x7CEB, 0x8303, 0x7CA0, 0x8342, 0x7BB3, 0x8375, 0x7B3F, 0x83B2, 0x7ADA, 0x843E, 0x7A4C, 0x84A1, 0x7A11, 0x84DA, 0x79F7, 0x8528, 0x7A0D, 0x8575, 0x7A3B, 0x8597, 0x7A59, 0x861A, 0x7B08, 0x8672, 0x7C1B, 0x8684, 0x7CB2, 0x8686, 0x7D50, 0x8636, 0x7E77, 0x8597, 0x7F10, 0x84E7, 0x7F24, 0x8442, 0x7EA8, 0x843C, 0x7E82, 0x8439, 0x7E27, 0x847D, 0x7E2E, 0x8498, 0x7E44, 0x84F4, 0x7E8C, 0x8582, 0x7E7E, 0x85FA, 0x7E0C, 0x8630, 0x7D40, 0x862E, 0x7CC4, 0x861C, 0x7C48, 0x85D5, 0x7B74, 0x8562, 0x7AE7, 0x851B, 0x7ABD, 0x84E1, 0x7AAF, 0x848E, 0x7AE2, 0x8456, 0x7B13, 0x83F8, 0x7B7B, 0x83CC, 0x7BCD, 0x83A8, 0x7C2E, 0x837D, 0x7CFD, 0x8365, 0x7EF1, 0x8367, 0x8074, 0x8361, 0x810D, 0x8303, 0x8341, 0x8266, 0x8533, 0x81A6, 0x8702, 0x81A4, 0x8710, 0x824F, 0x8671, 0x82F2, 0x8603, 0x83B0, 0x85C4, 0x8493, 0x860B, 0x84F8, 0x8689, 0x853B, 0x8727, 0x8575, 0x87EB, 0x85F2, 0x8982, 0x8655, 0x8ABA, 0x86A4, 0x8B6E, 0x86D5, 0x8BAE, 0x8702, 0x8BCD, 0x8779, 0x8BD7, 0x87BB, 0x8BBA, 0x8806, 0x8B7C, 0x8834, 0x8B3C, 0x8853, 0x8B04, 0x8887, 0x8A44, 0x8881, 0x8962, 0x8869, 0x88EC, 0x884A, 0x888D, 0x87EB, 0x8810, 0x876F, 0x880F, 0x86FC, 0x887C, 0x86BC, 0x892D, 0x86AF, 0x8955, 0x866E, 0x8955, 0x8665, 0x88F9, 0x86C0, 0x8806, 0x8756, 0x8771, 0x8806, 0x876F, 0x8899, 0x8824, 0x88C9, 0x88AB, 0x88E7, 0x8932, 0x88F5, 0x8A64, 0x88B1, 0x8B88, 0x8873, 0x8C00, 0x882B, 0x8C5B, 0x87DD, 0x8C9D, 0x8790, 0x8CC5, 0x86E1, 0x8CCB, 0x86A0, 0x8CA8, 0x8679, 0x8C86, 0x863A, 0x8C3E, 0x85C5, 0x8B6D, 0x853C, 0x8A3D, 0x847D, 0x8882, 0x8456, 0x8835, 0x8420, 0x8808, 0x83DF, 0x8820, 0x831F, 0x88EC, 0x825B, 0x8A2B, 0x8258, 0x8A47, 0x8323, 0x8BA0, 0x8399, 0x8CA6, 0x83F8, 0x8DF6, 0x8405, 0x8F9A, 0x83DE, 0x905F, 0x83A4, 0x9120, 0x833B, 0x929B, 0x82F3, 0x945E, 0x82FC, 0x9529, 0x8319, 0x9587, 0x8336, 0x95C0, 0x841E, 0x968C, 0x844B, 0x9688, 0x8482, 0x966F, 0x84E3, 0x9607, 0x852B, 0x955E, 0x8543, 0x94FA, 0x854B, 0x9497, 0x852F, 0x93EA, 0x84D7, 0x9378, 0x8463, 0x9357, 0x83F5, 0x9378, 0x83AE, 0x9352, 0x83BB, 0x92D5, 0x83EB, 0x92BA, 0x8461, 0x928C, 0x8501, 0x92C4, 0x8587, 0x937A, 0x85B9, 0x949F, 0x85AC, 0x9536, 0x8586, 0x95D3, 0x8538, 0x96A1, 0x84B0, 0x9749, 0x845E, 0x9778, 0x8401, 0x9786, 0x83A7, 0x975E, 0x835F, 0x9730, 0x82CB, 0x96A2, 0x8285, 0x962B, 0x825B, 0x95B6, 0x824F, 0x9579, 0x822A, 0x945A, 0x8233, 0x932B, 0x828E, 0x8FF7, 0x8201, 0x8E1D, 0x81D6, 0x8E1B, 0x80A8, 0x8E1A, 0x7D88, 0x9136, 0x7D81, 0x9352, 0x7E13, 0x9482, 0x7EE8, 0x960C, 0x7F4A, 0x970B, 0x7F69, 0x97B4, 0x7F6C, 0x983B, 0x7F63, 0x9881, 0x7F26, 0x9992, 0x7EEE, 0x9A13, 0x7EA6, 0x9A86, 0x7E66, 0x9ACC, 0x7E14, 0x9B05, 0x7D61, 0x9B0D, 0x7CC3, 0x9A88, 0x7C84, 0x9A22, 0x7C50, 0x99AA, 0x7C25, 0x987B, 0x7C63, 0x9759, 0x7CE5, 0x9694, 0x7D8C, 0x9653, 0x7DB0, 0x966C, 0x7DB1, 0x96DF, 0x7D0E, 0x971E, 0x7CAB, 0x97B5, 0x7C81, 0x9884, 0x7CA2, 0x9950, 0x7CCE, 0x99AC, 0x7D03, 0x99F6, 0x7D77, 0x9A4B, 0x7DF2, 0x9A35, 0x7E2F, 0x9A00, 0x7E59, 0x99C6, 0x7E64, 0x99B4, 0x7E97, 0x9944, 0x7EAE, 0x98F9, 0x7ECA, 0x9840, 0x7EC4, 0x97E8, 0x7EAF, 0x9796, 0x7E5B, 0x96EA, 0x7D73, 0x9597, 0x7C95, 0x9462, 0x7C76, 0x9426, 0x7C3D, 0x9397, 0x7C18, 0x92D4, 0x7C1D, 0x9165, 0x7C9A, 0x8F14, 0x7CE9, 0x8E19, 0x7CDA, 0x8E1F, 0x7A83, 0x8FB1, 0x7A47, 0x8FC2, 0x7960, 0x8FD1, 0x78E6, 0x8FA5, 0x787F, 0x8F77, 0x77CC, 0x8F40, 0x7777, 0x8F3D, 0x772A, 0x8F54, 0x768D, 0x8FBB, 0x7670, 0x8FDD, 0x7609, 0x9086, 0x75EE, 0x90E1, 0x75DF, 0x916F, 0x75DF, 0x91A2, 0x75FF, 0x9292, 0x767C, 0x933F, 0x7721, 0x9375, 0x77A0, 0x92F1, 0x779C, 0x90BF, 0x779F, 0x907F, 0x77A1, 0x9055, 0x77DC, 0x904C, 0x77ED, 0x9087, 0x783B, 0x91C9, 0x7809, 0x9369, 0x77B0, 0x9410, 0x7737, 0x9468, 0x7645, 0x9438, 0x7579, 0x933A, 0x753D, 0x9268, 0x752C, 0x9188, 0x7538, 0x90AB, 0x7557, 0x9012, 0x756A, 0x8FD4, 0x7617, 0x8E93, 0x7664, 0x8E4F, 0x76E5, 0x8DE6, 0x7760, 0x8DAC, 0x77DC, 0x8D9E, 0x78BE, 0x8DC4, 0x795C, 0x8DF1, 0x7988, 0x8DF0, 0x7A69, 0x8DA0, 0x7AB9, 0x8D58, 0x7B46, 0x8C9F, 0x7BB3, 0x8BD0, 0x7BB7, 0x8B31, 0x7AD6, 0x8B59, 0x7983, 0x8B9A, 0x791B, 0x8BAC, 0x7895, 0x8B9D, 0x780B, 0x8B35, 0x77A4, 0x8A6A, 0x7784, 0x89EC, 0x773F, 0x8886, 0x7724, 0x880F, 0x76DB, 0x86FD, 0x7673, 0x8607, 0x75E1, 0x859E, 0x7538, 0x85D5, 0x7502, 0x8614, 0x74DB, 0x8661, 0x74C1, 0x869C, 0x74A2, 0x87BB, 0x74B8, 0x885D, 0x74C3, 0x888C, 0x74DF, 0x88D2, 0x7574, 0x8936, 0x761A, 0x88D3, 0x7672, 0x87D7, 0x767D, 0x87BC, 0x76AE, 0x8795, 0x76CA, 0x87F9, 0x76A5, 0x88B8, 0x7656, 0x895A, 0x7578, 0x89EF, 0x74FD, 0x89D4, 0x748E, 0x895C, 0x7462, 0x88FE, 0x7441, 0x8876, 0x7427, 0x87D9, 0x744C, 0x862A, 0x7494, 0x8576, 0x74D8, 0x8513, 0x74FC, 0x84EE, 0x75E8, 0x848A, 0x76DA, 0x851A, 0x777B, 0x865A, 0x77EA, 0x87BE, 0x7847, 0x8903, 0x7873, 0x8975, 0x78A2, 0x89B1, 0x78D7, 0x89D9, 0x791D, 0x89F0, 0x79C7, 0x89AB, 0x7A2B, 0x8938, 0x7AA0, 0x8868, 0x7A67, 0x83FA, 0x79D6, 0x82A1, 0x795A, 0x80F5, 0x7937, 0x7FF7, 0x793A, 0x7EE4, 0x7950, 0x7E54, 0x7970, 0x7DD1, 0x798F, 0x7D44, 0x79B3, 0x7BEA, 0x79AD, 0x7B69, 0x7992, 0x7B0C, 0x7983, 0x7AE4, 0x7886, 0x79EC, 0x77A1, 0x7ACF, 0x7787, 0x7B52, 0x777B, 0x7BDB, 0x77B1, 0x7C9E, 0x7846, 0x7CE9, 0x78E3, 0x7CA0, 0x7917, 0x7CB1, 0x791B, 0x7D17, 0x78B7, 0x7D82, 0x784C, 0x7DB0, 0x776A, 0x7D66, 0x770C, 0x7CC6, 0x76E4, 0x7BEA, 0x76EB, 0x7B15, 0x7702, 0x7A7F, 0x7710, 0x7A4B, 0x77A2, 0x790A, 0x7891, 0x789F, 0x7973, 0x790B, 0x7A2C, 0x7A0F, 0x7A54, 0x7A76, 0x7A78, 0x7AEE, 0x7A8E, 0x7BF9, 0x7A65, 0x7DC1, 0x7A4A, 0x7EDC, 0x7A4B, 0x7F1B, 0x7A7F, 0x800B, 0x7AFA, 0x80FD, 0x7B72, 0x81A2, 0x7D4E, 0x80DA, 0x7F2C, 0x824D, 0x7FB6, 0x8175, 0x800C, 0x809F, 0x8045, 0x7FD2, 0x8056, 0x7F0C, 0x8037, 0x7E65, 0x8008, 0x7E02, 0x7F7E, 0x7D1D, 0x7E90, 0x7BCF, 0x7E13, 0x7B0A, 0x7DDC, 0x7A70, 0x7DC6, 0x79DB, 0x7DC9, 0x797D, 0x7DDB, 0x787C, 0x7E01, 0x77E5, 0x7E25, 0x7782, 0x7E5D, 0x7711, 0x7E85, 0x76D8, 0x7EBA, 0x7698, 0x7F6C, 0x7643};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_portrait.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_portrait.h
new file mode 100644
index 0000000000..ef86082077
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/bootscreen_logo_portrait.h
@@ -0,0 +1,43 @@
+
+/****************************************************************************
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+/**
+ * This file was auto-generated using "svg2cpp.pl"
+ *
+ * The encoding consists of x,y pairs with the min and max scaled to
+ * 0x0000 and 0xFFFE. A single 0xFFFF in the data stream indicates the
+ * start of a new closed path.
+ */
+
+#pragma once
+
+constexpr float x_min = 0.000000;
+
+constexpr float x_max = 272.000000;
+
+constexpr float y_min = 0.000000;
+
+constexpr float y_max = 480.000000;
+
+const PROGMEM uint16_t logo_green[] = {0x8048, 0x46D9, 0x27BC, 0x9DBA, 0xD8D3, 0x9DBA};
+
+const PROGMEM uint16_t logo_mark[] = {0xDB9F, 0xAC0C, 0xDA6F, 0xAC2D, 0xD970, 0xAC91, 0xD8C0, 0xAD23, 0xD885, 0xADCF, 0xD8C0, 0xAE7A, 0xD970, 0xAF0C, 0xDA6F, 0xAF6F, 0xDB9F, 0xAF8F, 0xDCCE, 0xAF6F, 0xDDD0, 0xAF0C, 0xDE7D, 0xAE7B, 0xDEB9, 0xADCF, 0xDE7D, 0xAD22, 0xDDD0, 0xAC91, 0xDCCE, 0xAC2D, 0xFFFF, 0xDB9F, 0xABC3, 0xDCFE, 0xABEA, 0xDE28, 0xAC5E, 0xDEF1, 0xAD06, 0xDF36, 0xADCF, 0xDEF1, 0xAE95, 0xDE28, 0xAF3E, 0xDCFE, 0xAFB1, 0xDB9F, 0xAFD8, 0xDA3F, 0xAFB1, 0xD916, 0xAF3E, 0xD849, 0xAE95, 0xD808, 0xADCF, 0xD849, 0xAD06, 0xD916, 0xAC5E, 0xDA3F, 0xABEA, 0xFFFF, 0xDB7D, 0xACE6, 0xDAE4, 0xACE6, 0xDAE4, 0xADA9, 0xDB7D, 0xADA9, 0xDC3B, 0xAD94, 0xDC71, 0xAD48, 0xDC3B, 0xACFD, 0xFFFF, 0xDB85, 0xAC9E, 0xDCCB, 0xACC8, 0xDD37, 0xAD47, 0xDCF6, 0xADAC, 0xDC3E, 0xADDE, 0xDC85, 0xADFF, 0xDCE8, 0xAE4E, 0xDD92, 0xAEEA, 0xDCBD, 0xAEEA, 0xDC1E, 0xAE58, 0xDBA7, 0xAE03, 0xDB36, 0xADEF, 0xDAE4, 0xADEF, 0xDAE4, 0xAEEA, 0xDA26, 0xAEEA, 0xDA26, 0xAC9E};
+
+const PROGMEM uint16_t logo_type[] = {0xD8D5, 0xA520, 0xD8A5, 0xA563, 0xD82E, 0xA57F, 0xD348, 0xA57F, 0xD2D1, 0xA598, 0xD2A0, 0xA5D9, 0xD2A0, 0xAF7A, 0xD274, 0xAFBE, 0xD202, 0xAFDA, 0xCD37, 0xAFDA, 0xCCBF, 0xAFBE, 0xCC8F, 0xAF7A, 0xCC8F, 0xA5D9, 0xCC63, 0xA598, 0xCBF1, 0xA57F, 0xC70B, 0xA57F, 0xC694, 0xA563, 0xC664, 0xA520, 0xC664, 0xA28C, 0xC70B, 0xA22C, 0xD82E, 0xA22C, 0xD8A5, 0xA248, 0xD8D5, 0xA28C, 0xFFFF, 0xB138, 0xAC8C, 0xB952, 0xAC8C, 0xB952, 0xA57F, 0xB138, 0xA57F, 0xFFFF, 0xBF27, 0xA421, 0xBF57, 0xA476, 0xBF6D, 0xA4D0, 0xBF6D, 0xAD36, 0xBF57, 0xAD90, 0xBF27, 0xADE6, 0xBBFA, 0xAFB2, 0xBB60, 0xAFCF, 0xBABD, 0xAFDA, 0xAFCE, 0xAFDA, 0xAF30, 0xAFCF, 0xAE9A, 0xAFB2, 0xAB6E, 0xADE6, 0xAB39, 0xAD90, 0xAB28, 0xAD36, 0xAB28, 0xA4D0, 0xAB39, 0xA476, 0xAB6E, 0xA421, 0xAE9A, 0xA255, 0xAF30, 0xA239, 0xAFCE, 0xA22C, 0xBABD, 0xA22C, 0xBB60, 0xA239, 0xBBFA, 0xA255, 0xFFFF, 0x93A4, 0xACDC, 0x9CEA, 0xACDC, 0x9CEA, 0xAA34, 0x93A4, 0xAA34, 0x93A4, 0xACDC, 0xFFFF, 0x93A4, 0xA796, 0x9CEA, 0xA796, 0x9CEA, 0xA525, 0x93A4, 0xA525, 0xFFFF, 0xA227, 0xA421, 0xA258, 0xA478, 0xA26E, 0xA4D5, 0xA26E, 0xA700, 0xA24F, 0xA757, 0xA204, 0xA7A5, 0xA089, 0xA8B8, 0xA061, 0xA903, 0xA092, 0xA949, 0xA1FC, 0xAA43, 0xA24B, 0xAA91, 0xA26E, 0xAAE8, 0xA26E, 0xAD36, 0xA258, 0xAD90, 0xA227, 0xADE6, 0x9EFC, 0xAFB2, 0x9E61, 0xAFCF, 0x9DBE, 0xAFDA, 0x8ED0, 0xAFDA, 0x8E28, 0xAF7A, 0x8E28, 0xA28C, 0x8E59, 0xA248, 0x8ED0, 0xA22C, 0x9DBE, 0xA22C, 0x9E61, 0xA239, 0x9EFC, 0xA255, 0xFFFF, 0x853C, 0xA502, 0x8517, 0xA557, 0x84C9, 0xA5A2, 0x7994, 0xACC8, 0x8494, 0xACC8, 0x850A, 0xACE4, 0x853C, 0xAD27, 0x853C, 0xAF7A, 0x850A, 0xAFBE, 0x8494, 0xAFDA, 0x7371, 0xAFDA, 0x72C9, 0xAF7A, 0x72C9, 0xAD09, 0x72E8, 0xACB2, 0x7333, 0xAC64, 0x7EA5, 0xA53E, 0x73A6, 0xA53E, 0x732F, 0xA522, 0x72FE, 0xA4DF, 0x72FE, 0xA28C, 0x732F, 0xA248, 0x73A6, 0xA22C, 0x8494, 0xA22C, 0x850A, 0xA248, 0x853C, 0xA28C, 0xFFFF, 0x6B68, 0xAC87, 0x6BDB, 0xACA3, 0x6C07, 0xACE6, 0x6C07, 0xAF7A, 0x6BDB, 0xAFBE, 0x6B68, 0xAFDA, 0x5C84, 0xAFDA, 0x5BDC, 0xAF7A, 0x5BDC, 0xA28C, 0x5C84, 0xA22C, 0x6146, 0xA22C, 0x61EE, 0xA28C, 0x61EE, 0xAC2D, 0x621E, 0xAC6E, 0x6295, 0xAC87, 0xFFFF, 0x52C6, 0xA248, 0x52F7, 0xA28C, 0x52F7, 0xAD45, 0x52EE, 0xAD45, 0x52DC, 0xAD9B, 0x52B1, 0xADE6, 0x4F85, 0xAFB2, 0x4EEA, 0xAFCF, 0x4E47, 0xAFDA, 0x4359, 0xAFDA, 0x42BA, 0xAFCF, 0x4224, 0xAFB2, 0x3EF8, 0xADE6, 0x3EC3, 0xAD90, 0x3EB2, 0xAD36, 0x3EB2, 0xA28C, 0x3EE2, 0xA248, 0x3F5A, 0xA22C, 0x441B, 0xA22C, 0x4493, 0xA248, 0x44C3, 0xA28C, 0x44C3, 0xAC2D, 0x44F4, 0xAC71, 0x456B, 0xAC8C, 0x4C3E, 0xAC8C, 0x4CB1, 0xAC71, 0x4CDD, 0xAC2D, 0x4CDD, 0xA28C, 0x4D0D, 0xA248, 0x4D85, 0xA22C, 0x524F, 0xA22C, 0xFFFF, 0x3748, 0xAC87, 0x37BB, 0xACA3, 0x37E7, 0xACE6, 0x37E7, 0xAF7A, 0x37BB, 0xAFBE, 0x3748, 0xAFDA, 0x2864, 0xAFDA, 0x27BC, 0xAF7A, 0x27BC, 0xA28C, 0x2864, 0xA22C, 0x2D26, 0xA22C, 0x2DCD, 0xA28C, 0x2DCD, 0xAC2D, 0x2DFE, 0xAC6E, 0x2E75, 0xAC87};
+
+const PROGMEM uint16_t logo_black[] = {0x8048, 0x527A, 0x8ADE, 0x5CDE, 0x75B2, 0x5CDE, 0xFFFF, 0x8048, 0x4FF6, 0x71D9, 0x5E20, 0x8EB8, 0x5E20, 0x8048, 0x4FF6, 0xFFFF, 0x4436, 0x8D8E, 0x4ECC, 0x97F2, 0x39A0, 0x97F2, 0xFFFF, 0x4436, 0x8B0A, 0x35C8, 0x9934, 0x52A5, 0x9934, 0xFFFF, 0xBC3D, 0x8D8E, 0xC6D4, 0x97F2, 0xB1A7, 0x97F2, 0xFFFF, 0xBC3D, 0x8B0A, 0xADCE, 0x9934, 0xCAAC, 0x9934, 0xFFFF, 0x8045, 0x6778, 0x7F6D, 0x67A7, 0x7E9D, 0x689F, 0x7D49, 0x69EA, 0x7B41, 0x6A81, 0x7908, 0x6A3A, 0x7726, 0x692C, 0x75EA, 0x685A, 0x7505, 0x684C, 0x744A, 0x6899, 0x73F5, 0x69A8, 0x7345, 0x6B1A, 0x7193, 0x6BF8, 0x6F4D, 0x6C08, 0x6CFA, 0x6B45, 0x6B61, 0x6AA3, 0x6A7D, 0x6AB7, 0x69EB, 0x6B1D, 0x6A1D, 0x6C34, 0x6A22, 0x6DB8, 0x68E5, 0x6ECD, 0x66B9, 0x6F33, 0x6417, 0x6EC5, 0x6239, 0x6E5C, 0x6165, 0x6E91, 0x6108, 0x6F09, 0x61C1, 0x7018, 0x6282, 0x7196, 0x61CF, 0x72D1, 0x5FE5, 0x7384, 0x5D38, 0x7380, 0x5B4B, 0x7365, 0x5A97, 0x73B7, 0x5A74, 0x7438, 0x5B90, 0x7520, 0x5CE8, 0x7671, 0x5CCB, 0x77BB, 0x5B43, 0x78B0, 0x58B6, 0x7914, 0x56D7, 0x7944, 0x564F, 0x79AD, 0x5667, 0x7A2F, 0x57DA, 0x7AE3, 0x59B7, 0x7BF3, 0x5A31, 0x7D37, 0x5927, 0x7E5D, 0x56E0, 0x7F1E, 0x5529, 0x7F93, 0x54D7, 0x800D, 0x5529, 0x8087, 0x56E0, 0x80FD, 0x5926, 0x81BE, 0x5A30, 0x82E5, 0x59B5, 0x8428, 0x57D8, 0x8538, 0x5664, 0x85EB, 0x564C, 0x866D, 0x56D4, 0x86D7, 0x58B2, 0x8708, 0x5B3F, 0x876B, 0x5CC6, 0x8860, 0x5CE3, 0x89AA, 0x5B8B, 0x8AFC, 0x5A6D, 0x8BE3, 0x5A91, 0x8C65, 0x5B44, 0x8CB7, 0x5D32, 0x8C9C, 0x5FDE, 0x8C98, 0x61C7, 0x8D4B, 0x627A, 0x8E87, 0x61B9, 0x9005, 0x60FF, 0x9114, 0x615C, 0x918B, 0x622F, 0x91C0, 0x640E, 0x9158, 0x66B0, 0x90EA, 0x68DC, 0x9150, 0x6A18, 0x9266, 0x6A12, 0x93E9, 0x69E0, 0x9501, 0x6A72, 0x9567, 0x6B56, 0x957B, 0x6CEE, 0x94D9, 0x6F43, 0x9417, 0x7188, 0x9428, 0x7339, 0x9506, 0x73E9, 0x9678, 0x743E, 0x9787, 0x74F8, 0x97D4, 0x75DD, 0x97C6, 0x771A, 0x96F4, 0x78FB, 0x95E6, 0x7B35, 0x95A1, 0x7D3D, 0x9637, 0x7E91, 0x9782, 0x7F60, 0x987A, 0x8038, 0x98AA, 0x810F, 0x987B, 0x81DF, 0x9782, 0x8333, 0x9638, 0x853B, 0x95A1, 0x8775, 0x95E7, 0x8956, 0x96F5, 0x8A92, 0x97C8, 0x8B78, 0x97D6, 0x8C32, 0x9789, 0x8C88, 0x967A, 0x8D37, 0x9508, 0x8EE9, 0x942A, 0x912F, 0x941A, 0x9383, 0x94DD, 0x951B, 0x957F, 0x95FF, 0x956B, 0x9690, 0x9505, 0x9660, 0x93ED, 0x9659, 0x926A, 0x9797, 0x9154, 0x99C3, 0x90EF, 0x9C65, 0x915D, 0x9E43, 0x91C6, 0x9F17, 0x9191, 0x9F74, 0x9119, 0x9EBB, 0x900A, 0x9DFA, 0x8E8C, 0x9EAE, 0x8D51, 0xA098, 0x8C9E, 0xA345, 0x8CA2, 0xA531, 0x8CBE, 0xA5E5, 0x8C6B, 0xA609, 0x8BEA, 0xA4EC, 0x8B02, 0xA394, 0x89B1, 0xA3B2, 0x8867, 0xA53A, 0x8772, 0xA7C6, 0x870E, 0xA9A5, 0x86DE, 0xAA2D, 0x8675, 0xAA14, 0x85F2, 0xA8A2, 0x853F, 0xA6C5, 0x842E, 0xA64B, 0x82EB, 0xA755, 0x81C5, 0xA99C, 0x8104, 0xAB52, 0x808F, 0xABA6, 0x8015, 0xAB52, 0x7F9B, 0xA99C, 0x7F25, 0xA755, 0x7E64, 0xA64C, 0x7D3E, 0xA6C7, 0x7BFA, 0xA8A5, 0x7AEA, 0xAA18, 0x7A37, 0xAA31, 0x79B5, 0xA9A9, 0x794B, 0xA7CA, 0x791B, 0xA53C, 0x78B7, 0xA3B6, 0x77C1, 0xA39A, 0x7677, 0xA4F1, 0x7526, 0xA60E, 0x743F, 0xA5EB, 0x73BD, 0xA538, 0x736B, 0xA34B, 0x7387, 0xA09E, 0x738A, 0x9EB4, 0x72D6, 0x9E02, 0x719B, 0x9EC4, 0x701D, 0x9F7E, 0x6F0E, 0x9F20, 0x6E96, 0x9E4E, 0x6E61, 0x9C6E, 0x6ECA, 0x99CB, 0x6F37, 0x97A0, 0x6ED2, 0x9664, 0x6DBC, 0x966B, 0x6C38, 0x969B, 0x6B21, 0x960B, 0x6ABB, 0x9526, 0x6AA6, 0x938E, 0x6B48, 0x913B, 0x6C0B, 0x8EF4, 0x6BFA, 0x8D43, 0x6B1D, 0x8C94, 0x69AA, 0x8C3F, 0x689B, 0x8B85, 0x684D, 0x8A9E, 0x685C, 0x8962, 0x692E, 0x8781, 0x6A3C, 0x8546, 0x6A82, 0x833F, 0x69EA, 0x81EC, 0x68A0, 0x811C, 0x67A8, 0x8045, 0x6778, 0x8045, 0x6778, 0xFFFF, 0x8047, 0x6AA0, 0x81C8, 0x6AFA, 0x8268, 0x6BD5, 0x81C8, 0x6CAF, 0x8047, 0x6D09, 0x7EC6, 0x6CAF, 0x7E27, 0x6BD5, 0x7EC6, 0x6AFA, 0x8047, 0x6AA0, 0x8047, 0x6AA0, 0xFFFF, 0x803E, 0x6E19, 0x867C, 0x6E71, 0x8C65, 0x6F75, 0x91D7, 0x711B, 0x96AD, 0x735B, 0x9ABC, 0x762C, 0x9DA2, 0x794C, 0x9F5F, 0x7CA2, 0x9FF3, 0x8011, 0x9F5E, 0x8380, 0x9DA1, 0x86D5, 0x9ABA, 0x89F6, 0x96AB, 0x8CC7, 0x91D6, 0x8F08, 0x8C65, 0x90AD, 0x867C, 0x91B1, 0x803D, 0x9209, 0x7A00, 0x91B1, 0x7416, 0x90AD, 0x6EA6, 0x8F08, 0x69D0, 0x8CC7, 0x65D6, 0x8A0A, 0x62EE, 0x86F4, 0x6125, 0x839B, 0x6089, 0x8011, 0x6124, 0x7C88, 0x62ED, 0x792E, 0x65D6, 0x7619, 0x69CF, 0x735B, 0x6EA5, 0x711B, 0x7416, 0x6F75, 0x7A00, 0x6E71, 0x803E, 0x6E19, 0x803E, 0x6E19, 0xFFFF, 0x803E, 0x6EB2, 0x7A5A, 0x6F04, 0x74B2, 0x6FF8, 0x6F4B, 0x7194, 0x6A8F, 0x73C7, 0x66A2, 0x7681, 0x63D5, 0x7986, 0x6226, 0x7CBF, 0x6197, 0x8011, 0x6226, 0x8363, 0x63D5, 0x869C, 0x66A2, 0x89A2, 0x6A8F, 0x8C5B, 0x6F4B, 0x8E8E, 0x74B2, 0x902B, 0x7A5A, 0x911E, 0x803D, 0x9170, 0x803E, 0x9170, 0x8621, 0x911E, 0x8BCA, 0x902B, 0x9130, 0x8E8E, 0x95ED, 0x8C5B, 0x99CF, 0x89AB, 0x9CA7, 0x869C, 0x9E55, 0x8367, 0x9EE5, 0x8011, 0x9E55, 0x7CBB, 0x9CA7, 0x7986, 0x99CF, 0x7677, 0x95ED, 0x73C7, 0x9130, 0x7194, 0x8BCA, 0x6FF8, 0x8621, 0x6F04, 0x803E, 0x6EB2, 0x803E, 0x6EB2, 0xFFFF, 0x80BC, 0x6FD7, 0x80AF, 0x71D8, 0x7FC8, 0x71D9, 0x7FB7, 0x6FD8, 0x80BC, 0x6FD7, 0x80BC, 0x6FD7, 0xFFFF, 0x83CB, 0x6FF6, 0x84CD, 0x700B, 0x843E, 0x7206, 0x835B, 0x71F4, 0xFFFF, 0x7CA9, 0x6FF8, 0x7D1A, 0x71F5, 0x7C37, 0x7207, 0x7BA7, 0x700D, 0x7CA9, 0x6FF8, 0x7CA9, 0x6FF8, 0xFFFF, 0x87CD, 0x7068, 0x88C7, 0x7092, 0x87BA, 0x727C, 0x86DF, 0x7258, 0xFFFF, 0x78A8, 0x706B, 0x7997, 0x725A, 0x78BA, 0x727E, 0x77AD, 0x7095, 0x78A8, 0x706B, 0x78A8, 0x706B, 0xFFFF, 0x6700, 0x708A, 0x6880, 0x70E5, 0x6920, 0x71BF, 0x6880, 0x7299, 0x66FF, 0x72F4, 0x657F, 0x7299, 0x64E0, 0x71BF, 0x657F, 0x70E4, 0x6700, 0x708A, 0x6700, 0x708A, 0xFFFF, 0x998D, 0x708C, 0x9B0E, 0x70E6, 0x9BAE, 0x71C0, 0x9B0E, 0x729B, 0x998D, 0x72F6, 0x980D, 0x729B, 0x976E, 0x71C1, 0x980D, 0x70E7, 0x998D, 0x708C, 0x998D, 0x708C, 0xFFFF, 0x8BA7, 0x712C, 0x8C95, 0x716A, 0x8B10, 0x7339, 0x8A3F, 0x7303, 0x8BA7, 0x712C, 0xFFFF, 0x74CE, 0x712F, 0x7635, 0x7307, 0x7564, 0x733C, 0x73DE, 0x716D, 0x74CE, 0x712F, 0x74CE, 0x712F, 0xFFFF, 0x8F47, 0x723F, 0x9023, 0x728E, 0x8E2D, 0x743A, 0x8D6B, 0x73F4, 0x8F47, 0x723F, 0xFFFF, 0x712D, 0x7242, 0x7308, 0x73F7, 0x7248, 0x743D, 0x7050, 0x7292, 0x712D, 0x7242, 0x712D, 0x7242, 0xFFFF, 0x803E, 0x72F6, 0x891B, 0x73F4, 0x909A, 0x76CC, 0x959F, 0x7B0B, 0x975E, 0x8011, 0x959F, 0x8517, 0x909A, 0x8957, 0x891B, 0x8C2E, 0x803E, 0x8D2B, 0x7761, 0x8C2E, 0x6FE2, 0x8957, 0x6ADD, 0x8517, 0x691E, 0x8011, 0x6ADD, 0x7B0B, 0x6FE2, 0x76CC, 0x7761, 0x73F4, 0x803E, 0x72F6, 0x803E, 0x72F6, 0xFFFF, 0x803E, 0x738F, 0x77C8, 0x7481, 0x70A0, 0x7738, 0x6BD7, 0x7B46, 0x6A2C, 0x8011, 0x6BD7, 0x84DC, 0x70A1, 0x88EA, 0x77C9, 0x8BA1, 0x803E, 0x8C93, 0x88B4, 0x8BA1, 0x8FDB, 0x88EA, 0x94A5, 0x84DD, 0x9650, 0x8011, 0x94A5, 0x7B46, 0x8FDB, 0x7738, 0x88B4, 0x7481, 0x803E, 0x738F, 0x803E, 0x738F, 0xFFFF, 0x929B, 0x739A, 0x935C, 0x73FA, 0x9100, 0x7578, 0x905A, 0x7527, 0x9175, 0x745E, 0xFFFF, 0x6DDC, 0x739D, 0x7022, 0x7527, 0x6F74, 0x757C, 0x6D16, 0x73FF, 0x6DDC, 0x739D, 0x6DDC, 0x739D, 0xFFFF, 0x9589, 0x7533, 0x9634, 0x75A4, 0x937E, 0x76ED, 0x92E8, 0x768B, 0xFFFF, 0x6AEB, 0x7539, 0x6D8D, 0x7690, 0x6CFB, 0x76F0, 0x6CEC, 0x76FA, 0x6BED, 0x7674, 0x6A40, 0x75A9, 0x6A45, 0x75A7, 0x6AEB, 0x7539, 0x6AEB, 0x7539, 0xFFFF, 0x980B, 0x7707, 0x989A, 0x7784, 0x9597, 0x7892, 0x951A, 0x7825, 0xFFFF, 0x686A, 0x770C, 0x6B5B, 0x782A, 0x6ADF, 0x7897, 0x67DD, 0x7788, 0x686A, 0x770C, 0x686A, 0x770C, 0xFFFF, 0x9A12, 0x790A, 0x9A7E, 0x7991, 0x9740, 0x7A5E, 0x96E1, 0x79E8, 0x9A12, 0x790A, 0xFFFF, 0x6664, 0x790F, 0x6996, 0x79ED, 0x6937, 0x7A63, 0x65F9, 0x7996, 0x6664, 0x790F, 0x6664, 0x790F, 0xFFFF, 0x9B91, 0x7B32, 0x9BDB, 0x7BC1, 0x9870, 0x7C48, 0x9831, 0x7BCB, 0xFFFF, 0x64E6, 0x7B37, 0x6847, 0x7BD0, 0x6807, 0x7C4C, 0x649D, 0x7BC5, 0x64E6, 0x7B37, 0x64E6, 0x7B37, 0xFFFF, 0x9C82, 0x7D72, 0x9CA7, 0x7E06, 0x9925, 0x7E46, 0x9903, 0x7DC5, 0xFFFF, 0x63F7, 0x7D78, 0x6776, 0x7DC9, 0x6756, 0x7E49, 0x63D3, 0x7E0A, 0x63F7, 0x7D78, 0x63F7, 0x7D78, 0xFFFF, 0x5C87, 0x7EDB, 0x5E08, 0x7F35, 0x5EA8, 0x800F, 0x5E08, 0x80E9, 0x5C87, 0x8144, 0x5C85, 0x8144, 0x5B06, 0x80E9, 0x5A67, 0x800F, 0x5B06, 0x7F35, 0x5C87, 0x7EDB, 0x5C87, 0x7EDB, 0xFFFF, 0xA402, 0x7EDE, 0xA583, 0x7F38, 0xA623, 0x8011, 0xA623, 0x8013, 0xA583, 0x80EC, 0xA402, 0x8147, 0xA281, 0x80ED, 0xA1E2, 0x8013, 0xA281, 0x7F38, 0xA402, 0x7EDE, 0xA402, 0x7EDE, 0xFFFF, 0x9CE0, 0x7FC0, 0x9CE0, 0x8055, 0x9957, 0x804D, 0x9957, 0x7FCB, 0xFFFF, 0x639D, 0x7FC5, 0x6726, 0x7FCE, 0x6726, 0x8051, 0x639D, 0x805A, 0x639D, 0x7FC5, 0x639D, 0x7FC5, 0xFFFF, 0x9927, 0x81D1, 0x9CAA, 0x8210, 0x9C87, 0x82A2, 0x9907, 0x8252, 0x9927, 0x81D1, 0x9927, 0x81D1, 0xFFFF, 0x6757, 0x81D5, 0x6777, 0x8255, 0x63F9, 0x82A7, 0x63D4, 0x8214, 0xFFFF, 0x9877, 0x83CF, 0x9BE2, 0x8455, 0x9B99, 0x84E3, 0x9838, 0x844C, 0x9877, 0x83CF, 0x9877, 0x83CF, 0xFFFF, 0x6808, 0x83D3, 0x6848, 0x8450, 0x64E7, 0x84E8, 0x649E, 0x845A, 0xFFFF, 0x9749, 0x85B9, 0x9A88, 0x8684, 0x9A1D, 0x870C, 0x96EB, 0x862E, 0x9749, 0x85B9, 0x9749, 0x85B9, 0xFFFF, 0x6938, 0x85BD, 0x6997, 0x8634, 0x6665, 0x8710, 0x65F9, 0x8689, 0xFFFF, 0x95A2, 0x8785, 0x98A5, 0x8892, 0x9818, 0x890F, 0x9527, 0x87F2, 0x95A2, 0x8785, 0x95A2, 0x8785, 0xFFFF, 0x6ADF, 0x878A, 0x6B5B, 0x87F8, 0x686A, 0x8914, 0x67DC, 0x8897, 0x6ADF, 0x878A, 0xFFFF, 0x6CF7, 0x892F, 0x6D8D, 0x8991, 0x6AEB, 0x8AE9, 0x6A40, 0x8A79, 0xFFFF, 0x9380, 0x8932, 0x9645, 0x8A72, 0x963E, 0x8A77, 0x9599, 0x8AE3, 0x92F5, 0x898D, 0x9380, 0x8932, 0x9380, 0x8932, 0xFFFF, 0x9110, 0x8AA1, 0x936F, 0x8C1F, 0x92AA, 0x8C80, 0x9064, 0x8AF7, 0x9110, 0x8AA1, 0x9110, 0x8AA1, 0xFFFF, 0x6F73, 0x8AA5, 0x7021, 0x8AFB, 0x7035, 0x8B04, 0x6DED, 0x8C8B, 0x6DE1, 0x8C87, 0x6D17, 0x8C23, 0xFFFF, 0x8E3E, 0x8BE1, 0x9037, 0x8D8B, 0x8F59, 0x8DDC, 0x8D7C, 0x8C27, 0x8E3E, 0x8BE1, 0x8E3E, 0x8BE1, 0xFFFF, 0x7259, 0x8BEB, 0x731B, 0x8C31, 0x7140, 0x8DE7, 0x7064, 0x8D97, 0xFFFF, 0x8B21, 0x8CE3, 0x8CA9, 0x8EB2, 0x8BBA, 0x8EEF, 0x8A51, 0x8D18, 0x8B21, 0x8CE3, 0x8B21, 0x8CE3, 0xFFFF, 0x7576, 0x8CEB, 0x7648, 0x8D20, 0x74E0, 0x8EF8, 0x73F2, 0x8EBB, 0xFFFF, 0x66F3, 0x8D2F, 0x6874, 0x8D8A, 0x687D, 0x8D8F, 0x6886, 0x8D94, 0x6926, 0x8E6E, 0x6887, 0x8F48, 0x6705, 0x8FA2, 0x6584, 0x8F49, 0x657F, 0x8F45, 0x6570, 0x8F3E, 0x6573, 0x8F3E, 0x64D3, 0x8E63, 0x6573, 0x8D89, 0x66F3, 0x8D2F, 0x66F3, 0x8D2F, 0xFFFF, 0x9993, 0x8D31, 0x9B13, 0x8D8C, 0x9BB4, 0x8E66, 0x9B16, 0x8F40, 0x9993, 0x8F9A, 0x9814, 0x8F40, 0x9774, 0x8E66, 0x9812, 0x8D8C, 0x9993, 0x8D31, 0x9993, 0x8D31, 0xFFFF, 0x87CD, 0x8DA1, 0x88DC, 0x8F8B, 0x87E0, 0x8FB5, 0x86F0, 0x8DC6, 0x87CD, 0x8DA1, 0x87CD, 0x8DA1, 0xFFFF, 0x78CD, 0x8DA8, 0x79A8, 0x8DCB, 0x78BC, 0x8FBB, 0x77C1, 0x8F92, 0xFFFF, 0x8450, 0x8E19, 0x84E2, 0x9014, 0x83E0, 0x9029, 0x836C, 0x8E2C, 0x8450, 0x8E19, 0x8450, 0x8E19, 0xFFFF, 0x7C48, 0x8E1C, 0x7D2B, 0x8E2E, 0x7CBD, 0x902C, 0x7BBB, 0x9017, 0x7C48, 0x8E1C, 0xFFFF, 0x80BF, 0x8E49, 0x80D2, 0x904A, 0x7FCC, 0x904A, 0x7FD9, 0x8E49, 0x80BF, 0x8E49, 0x80BF, 0x8E49, 0xFFFF, 0x804F, 0x9321, 0x81D0, 0x937A, 0x8271, 0x9455, 0x81D1, 0x952F, 0x8051, 0x958A, 0x7ECF, 0x9530, 0x7E2F, 0x9456, 0x7ECE, 0x937B, 0x804F, 0x9321, 0x804F, 0x9321, 0xFFFF, 0x8048, 0x46D9, 0x27BC, 0x9DBA, 0xD8D3, 0x9DBA, 0xFFFF, 0x8048, 0x4BC9, 0x952E, 0x604A, 0x6B62, 0x604A, 0xFFFF, 0x68D2, 0x62CE, 0x97BF, 0x62CE, 0xB9BA, 0x8427, 0xA239, 0x9B36, 0x5E16, 0x9B36, 0x46B6, 0x8446, 0x68D2, 0x62CE, 0xFFFF, 0xBC3E, 0x869F, 0xD13B, 0x9B36, 0xA742, 0x9B36, 0xFFFF, 0x4431, 0x86BE, 0x590E, 0x9B36, 0x2F54, 0x9B36, 0x4431, 0x86BE};
+
+const PROGMEM uint16_t logo_white[] = {0x80BC, 0x6FD7, 0x80AF, 0x71D8, 0x7FC8, 0x71D9, 0x7FB7, 0x6FD8, 0x80BC, 0x6FD7, 0xFFFF, 0x83CB, 0x6FF6, 0x84CD, 0x700B, 0x843E, 0x7206, 0x835B, 0x71F4, 0xFFFF, 0x7CA9, 0x6FF8, 0x7D1A, 0x71F5, 0x7C37, 0x7207, 0x7BA7, 0x700D, 0x7CA9, 0x6FF8, 0x7CA9, 0x6FF8, 0xFFFF, 0x87CD, 0x7068, 0x88C7, 0x7092, 0x87BA, 0x727C, 0x86DF, 0x7258, 0xFFFF, 0x78A8, 0x706B, 0x7997, 0x725A, 0x78BA, 0x727E, 0x77AD, 0x7095, 0x78A8, 0x706B, 0x78A8, 0x706B, 0xFFFF, 0x8BA7, 0x712C, 0x8C95, 0x716A, 0x8B10, 0x7339, 0x8A3F, 0x7303, 0xFFFF, 0x74CE, 0x712F, 0x7635, 0x7307, 0x7564, 0x733C, 0x73DE, 0x716D, 0x74CE, 0x712F, 0x74CE, 0x712F, 0xFFFF, 0x8F47, 0x723F, 0x9023, 0x728E, 0x8E2D, 0x743A, 0x8D6B, 0x73F4, 0xFFFF, 0x712D, 0x7242, 0x7309, 0x73F7, 0x7248, 0x743D, 0x7050, 0x7292, 0x712D, 0x7242, 0x712D, 0x7242, 0xFFFF, 0x929B, 0x739A, 0x935C, 0x73FA, 0x9100, 0x7578, 0x905A, 0x7527, 0xFFFF, 0x6DDC, 0x739D, 0x7022, 0x7527, 0x6F74, 0x757C, 0x6D16, 0x73FF, 0x6DDC, 0x739D, 0x6DDC, 0x739D, 0xFFFF, 0x9589, 0x7533, 0x9634, 0x75A4, 0x937E, 0x76ED, 0x92E8, 0x768B, 0xFFFF, 0x6AEB, 0x7539, 0x6D8D, 0x7690, 0x6CFB, 0x76F0, 0x6A40, 0x75A9, 0x6AEB, 0x7539, 0xFFFF, 0x980B, 0x7707, 0x989A, 0x7784, 0x9597, 0x7892, 0x951A, 0x7825, 0xFFFF, 0x686A, 0x770C, 0x6B5B, 0x782A, 0x6ADF, 0x7897, 0x67DD, 0x7788, 0x686A, 0x770C, 0x686A, 0x770C, 0xFFFF, 0x9A12, 0x790A, 0x9A7E, 0x7991, 0x9740, 0x7A5E, 0x96E1, 0x79E8, 0xFFFF, 0x6664, 0x790F, 0x6996, 0x79ED, 0x6937, 0x7A63, 0x65F9, 0x7996, 0x6664, 0x790F, 0x6664, 0x790F, 0xFFFF, 0x9B91, 0x7B32, 0x9BDB, 0x7BC1, 0x9870, 0x7C48, 0x9831, 0x7BCC, 0xFFFF, 0x64E6, 0x7B37, 0x6847, 0x7BD0, 0x6807, 0x7C4C, 0x649D, 0x7BC5, 0x64E6, 0x7B37, 0x64E6, 0x7B37, 0xFFFF, 0x9C82, 0x7D72, 0x9CA7, 0x7E06, 0x9925, 0x7E46, 0x9903, 0x7DC5, 0xFFFF, 0x63F7, 0x7D78, 0x6776, 0x7DC9, 0x6756, 0x7E49, 0x63D3, 0x7E0A, 0x63F7, 0x7D78, 0x63F7, 0x7D78, 0xFFFF, 0x9CE0, 0x7FC0, 0x9CE0, 0x8055, 0x9957, 0x804D, 0x9957, 0x7FCB, 0xFFFF, 0x639D, 0x7FC5, 0x6726, 0x7FCE, 0x6726, 0x8051, 0x639D, 0x805A, 0x639D, 0x7FC5, 0xFFFF, 0x9927, 0x81D1, 0x9CAA, 0x8210, 0x9C87, 0x82A2, 0x9907, 0x8252, 0x9927, 0x81D1, 0x9927, 0x81D1, 0xFFFF, 0x6757, 0x81D5, 0x6777, 0x8256, 0x63F9, 0x82A7, 0x63D4, 0x8214, 0xFFFF, 0x9877, 0x83CF, 0x9BE2, 0x8455, 0x9B99, 0x84E3, 0x9838, 0x844C, 0x9877, 0x83CF, 0xFFFF, 0x6808, 0x83D3, 0x6848, 0x8450, 0x64E7, 0x84E8, 0x649E, 0x845A, 0xFFFF, 0x9749, 0x85B9, 0x9A88, 0x8684, 0x9A1D, 0x870C, 0x96EB, 0x862E, 0x9749, 0x85B9, 0x9749, 0x85B9, 0xFFFF, 0x6938, 0x85BD, 0x6997, 0x8634, 0x6665, 0x8710, 0x65F9, 0x8689, 0xFFFF, 0x95A2, 0x8785, 0x98A5, 0x8892, 0x9818, 0x890F, 0x9527, 0x87F2, 0x95A2, 0x8785, 0x95A2, 0x8785, 0xFFFF, 0x6ADF, 0x878A, 0x6B5B, 0x87F8, 0x686A, 0x8915, 0x67DC, 0x8897, 0xFFFF, 0x6CF7, 0x8930, 0x6D8D, 0x8991, 0x6AEB, 0x8AE9, 0x6A40, 0x8A79, 0xFFFF, 0x9380, 0x8932, 0x9645, 0x8A72, 0x9599, 0x8AE3, 0x92F5, 0x898D, 0x9380, 0x8932, 0xFFFF, 0x9110, 0x8AA1, 0x936F, 0x8C1F, 0x92AA, 0x8C80, 0x9064, 0x8AF7, 0x9110, 0x8AA1, 0x9110, 0x8AA1, 0xFFFF, 0x6F73, 0x8AA5, 0x7021, 0x8AFB, 0x6DED, 0x8C8C, 0x6D17, 0x8C23, 0xFFFF, 0x8E3E, 0x8BE1, 0x9037, 0x8D8B, 0x8F59, 0x8DDC, 0x8D7C, 0x8C27, 0x8E3E, 0x8BE1, 0x8E3E, 0x8BE1, 0xFFFF, 0x7259, 0x8BEB, 0x731B, 0x8C31, 0x7140, 0x8DE7, 0x7064, 0x8D97, 0xFFFF, 0x8B21, 0x8CE3, 0x8CA9, 0x8EB2, 0x8BBA, 0x8EEF, 0x8A51, 0x8D18, 0x8B21, 0x8CE3, 0x8B21, 0x8CE3, 0xFFFF, 0x7576, 0x8CEB, 0x7648, 0x8D20, 0x74E0, 0x8EF8, 0x73F2, 0x8EBB, 0xFFFF, 0x87CD, 0x8DA1, 0x88DC, 0x8F8B, 0x87E0, 0x8FB5, 0x86F0, 0x8DC6, 0x87CD, 0x8DA1, 0x87CD, 0x8DA1, 0xFFFF, 0x78CC, 0x8DA8, 0x79A8, 0x8DCB, 0x78BC, 0x8FBB, 0x77C0, 0x8F92, 0xFFFF, 0x8450, 0x8E19, 0x84E2, 0x9014, 0x83E0, 0x9029, 0x836C, 0x8E2C, 0x8450, 0x8E19, 0x8450, 0x8E19, 0xFFFF, 0x7C48, 0x8E1C, 0x7D2B, 0x8E2E, 0x7CBD, 0x902C, 0x7BBB, 0x9017, 0xFFFF, 0x80BE, 0x8E49, 0x80D1, 0x904A, 0x7FCC, 0x904A, 0x7FD9, 0x8E49, 0x80BE, 0x8E49, 0xFFFF, 0x8276, 0x75D6, 0x83AF, 0x75FE, 0x8436, 0x7628, 0x84AE, 0x7661, 0x8542, 0x7706, 0x8512, 0x77BA, 0x8457, 0x7845, 0x8335, 0x788B, 0x8318, 0x7882, 0x82D8, 0x7860, 0x831E, 0x7830, 0x8353, 0x7823, 0x83E6, 0x77F9, 0x8464, 0x7790, 0x847A, 0x771A, 0x8415, 0x76B7, 0x83B6, 0x7691, 0x8351, 0x7676, 0x827F, 0x7662, 0x81BB, 0x7687, 0x8161, 0x76AF, 0x8123, 0x76DA, 0x80E5, 0x771A, 0x80C5, 0x774D, 0x80B8, 0x77C1, 0x80D1, 0x77EE, 0x8107, 0x7814, 0x81CC, 0x786B, 0x837F, 0x7918, 0x8464, 0x7983, 0x84C0, 0x79B2, 0x852D, 0x79FD, 0x859D, 0x7ABC, 0x858E, 0x7B79, 0x8545, 0x7C25, 0x84D9, 0x7CC5, 0x8469, 0x7D4D, 0x843B, 0x7DCD, 0x8555, 0x7DA8, 0x85D3, 0x7D67, 0x870D, 0x7CA0, 0x87E0, 0x7BC0, 0x880D, 0x7B5B, 0x886D, 0x7A46, 0x88B3, 0x799B, 0x88CC, 0x7970, 0x893A, 0x78EA, 0x8995, 0x78A8, 0x8A01, 0x786F, 0x8AF8, 0x781F, 0x8BA6, 0x77FD, 0x8C0C, 0x77EF, 0x8C96, 0x77FB, 0x8D1D, 0x7815, 0x8D59, 0x7826, 0x8E40, 0x7889, 0x8EDB, 0x7925, 0x8EFC, 0x797B, 0x8EFF, 0x79D4, 0x8E71, 0x7A7B, 0x8D58, 0x7AD2, 0x8C23, 0x7ADE, 0x8AFF, 0x7A97, 0x8AF5, 0x7A81, 0x8AEF, 0x7A4E, 0x8B68, 0x7A52, 0x8B96, 0x7A5F, 0x8C39, 0x7A87, 0x8D33, 0x7A7F, 0x8E07, 0x7A3F, 0x8E66, 0x79CB, 0x8E63, 0x7985, 0x8E43, 0x793F, 0x8DC6, 0x78C6, 0x8CFA, 0x7876, 0x8C7E, 0x785F, 0x8C18, 0x7857, 0x8B84, 0x7874, 0x8B22, 0x788F, 0x8A7D, 0x78CA, 0x8A2E, 0x78F9, 0x89F0, 0x7930, 0x89A3, 0x79A5, 0x8979, 0x7AC0, 0x897C, 0x7B9C, 0x8972, 0x7BF2, 0x88CC, 0x7D32, 0x87B7, 0x7E4C, 0x8665, 0x7F52, 0x8660, 0x7F5A, 0x878F, 0x7F01, 0x88AE, 0x7EC2, 0x89FD, 0x7E9E, 0x8B8D, 0x7EC6, 0x8C40, 0x7F0E, 0x8CB6, 0x7F68, 0x8D1D, 0x7FD7, 0x8DFA, 0x80BD, 0x8EA8, 0x816E, 0x8F34, 0x81D4, 0x8F8A, 0x81F9, 0x8FDA, 0x820A, 0x90AB, 0x820F, 0x9120, 0x81FF, 0x91A5, 0x81DC, 0x91F4, 0x81B8, 0x922C, 0x8198, 0x9288, 0x812B, 0x927D, 0x80AB, 0x9252, 0x8068, 0x921C, 0x8033, 0x9174, 0x7FEB, 0x9099, 0x7FEB, 0x8FCF, 0x8029, 0x8F5D, 0x808D, 0x8F47, 0x80A4, 0x8ED4, 0x80A4, 0x8EC5, 0x8070, 0x8F65, 0x7FE6, 0x906D, 0x7F92, 0x91A4, 0x7F90, 0x92A8, 0x7FF7, 0x92FC, 0x8043, 0x9331, 0x8090, 0x9349, 0x813D, 0x92D1, 0x81E3, 0x9264, 0x8227, 0x91E5, 0x825B, 0x915D, 0x8280, 0x90D3, 0x8296, 0x8FA0, 0x829A, 0x8F2C, 0x8286, 0x8EE7, 0x8273, 0x8E78, 0x824A, 0x8DA9, 0x81D4, 0x8CB9, 0x8127, 0x8B68, 0x802C, 0x8B22, 0x8001, 0x8AC3, 0x7FE7, 0x8A50, 0x7FF4, 0x88FD, 0x8068, 0x87A4, 0x811D, 0x879E, 0x812D, 0x8904, 0x81F1, 0x89D4, 0x8285, 0x8A7C, 0x8343, 0x8A94, 0x8431, 0x8A4E, 0x84A1, 0x89E8, 0x850E, 0x892F, 0x85E5, 0x88B0, 0x86E5, 0x88C0, 0x8757, 0x88F2, 0x878D, 0x8927, 0x87AD, 0x8ABF, 0x8821, 0x8B0E, 0x881E, 0x8B70, 0x8811, 0x8C1B, 0x87D6, 0x8C9B, 0x8776, 0x8CC4, 0x873D, 0x8CD3, 0x8705, 0x8CA2, 0x86A3, 0x8C06, 0x8662, 0x8B39, 0x864F, 0x8A77, 0x8662, 0x89F9, 0x864D, 0x8A10, 0x8606, 0x8A66, 0x85F7, 0x8B35, 0x85DC, 0x8C50, 0x85FD, 0x8D3C, 0x8663, 0x8D94, 0x870A, 0x8D7D, 0x875F, 0x8D3A, 0x87B8, 0x8CB1, 0x882D, 0x8BC1, 0x888C, 0x8B30, 0x88A7, 0x8A8D, 0x88AE, 0x89EE, 0x8898, 0x896E, 0x887E, 0x8869, 0x882D, 0x87EE, 0x87EA, 0x87A4, 0x87A8, 0x878E, 0x8785, 0x874D, 0x86E3, 0x875D, 0x8637, 0x87FD, 0x8466, 0x8705, 0x835A, 0x86B8, 0x8359, 0x84A4, 0x8358, 0x7F20, 0x851B, 0x7F13, 0x864D, 0x8016, 0x86F9, 0x818E, 0x87D8, 0x823B, 0x8869, 0x8272, 0x88C9, 0x8276, 0x8915, 0x8266, 0x893D, 0x81FB, 0x89D8, 0x8197, 0x8A21, 0x8119, 0x8A62, 0x80A7, 0x8A8A, 0x8016, 0x8AAA, 0x7EDC, 0x8AAE, 0x7DC5, 0x8A63, 0x7D55, 0x8A29, 0x7CFA, 0x89E5, 0x7CAD, 0x8939, 0x7D1B, 0x8895, 0x7E00, 0x8825, 0x7F27, 0x8800, 0x7F66, 0x880F, 0x7F69, 0x8850, 0x7E49, 0x8873, 0x7D9A, 0x88C9, 0x7D4F, 0x893E, 0x7D8B, 0x89B2, 0x7DD8, 0x89E6, 0x7E36, 0x8A10, 0x7F02, 0x8A40, 0x7FDB, 0x8A34, 0x8046, 0x8A16, 0x8091, 0x89F5, 0x80A5, 0x89EB, 0x80FE, 0x89AB, 0x8126, 0x8981, 0x8159, 0x8918, 0x814F, 0x88E6, 0x8128, 0x88B8, 0x8094, 0x8856, 0x7EFC, 0x8796, 0x7D74, 0x86E7, 0x7D3D, 0x86C5, 0x7CD8, 0x8674, 0x7C98, 0x8605, 0x7CA0, 0x8536, 0x7D7C, 0x83E6, 0x7E07, 0x8357, 0x7DED, 0x835B, 0x79CC, 0x843E, 0x7962, 0x8448, 0x77CB, 0x8450, 0x76F3, 0x8438, 0x763E, 0x841E, 0x7502, 0x83FE, 0x746C, 0x83FD, 0x73E4, 0x840A, 0x72CE, 0x8444, 0x729B, 0x8457, 0x71E6, 0x84B7, 0x71B5, 0x84EB, 0x719B, 0x853B, 0x719B, 0x8558, 0x71D4, 0x85E0, 0x72B0, 0x8642, 0x73D4, 0x8661, 0x74B3, 0x8616, 0x74AD, 0x84D7, 0x74B2, 0x84B3, 0x74B5, 0x849B, 0x751E, 0x8496, 0x753B, 0x84B8, 0x75C5, 0x856E, 0x756D, 0x865A, 0x74D0, 0x86B8, 0x73FA, 0x86EA, 0x7250, 0x86CF, 0x70E7, 0x863F, 0x707E, 0x85C8, 0x705F, 0x8549, 0x7075, 0x84CC, 0x70AC, 0x8475, 0x70CD, 0x8452, 0x71FF, 0x839C, 0x7287, 0x8376, 0x736A, 0x833A, 0x7443, 0x8319, 0x751E, 0x8311, 0x76AC, 0x8327, 0x77C4, 0x8341, 0x7810, 0x8340, 0x799F, 0x8313, 0x7A2A, 0x82EA, 0x7B24, 0x8281, 0x7BE4, 0x820C, 0x7BEC, 0x81B1, 0x7A5E, 0x81C8, 0x7809, 0x81ED, 0x7751, 0x81F8, 0x7664, 0x81EF, 0x7571, 0x81B4, 0x74BB, 0x8141, 0x7483, 0x80F9, 0x7408, 0x802F, 0x73D9, 0x7FEB, 0x7359, 0x7F50, 0x72A0, 0x7EC4, 0x719E, 0x7E89, 0x7074, 0x7EA8, 0x7015, 0x7ECC, 0x6FD0, 0x7EF8, 0x6FA3, 0x7F19, 0x6F6B, 0x7FBB, 0x6F93, 0x8017, 0x6FA7, 0x8032, 0x6FD7, 0x805A, 0x70DF, 0x8092, 0x7205, 0x805A, 0x729E, 0x7FCB, 0x72B3, 0x7FBC, 0x7309, 0x7FA6, 0x733B, 0x7FDE, 0x72F9, 0x804B, 0x726D, 0x80A7, 0x70E6, 0x80FB, 0x700D, 0x80EC, 0x6F48, 0x80A8, 0x6EFC, 0x8073, 0x6EC1, 0x8026, 0x6E93, 0x7FCC, 0x6ED4, 0x7ED8, 0x6F54, 0x7E72, 0x6FCB, 0x7E3A, 0x700B, 0x7E25, 0x71AB, 0x7DED, 0x7356, 0x7E3E, 0x7472, 0x7EF4, 0x7536, 0x7FBD, 0x75DA, 0x8075, 0x7628, 0x80B6, 0x767B, 0x80D8, 0x76D9, 0x80EF, 0x7755, 0x80FC, 0x7881, 0x80D5, 0x7931, 0x8093, 0x7A00, 0x801E, 0x799B, 0x7D9B, 0x789A, 0x7CD8, 0x77C0, 0x7BE5, 0x7783, 0x7B55, 0x7787, 0x7AB9, 0x77AE, 0x7A67, 0x77E6, 0x7A1D, 0x781E, 0x79CD, 0x785E, 0x7909, 0x7853, 0x78C0, 0x7823, 0x788B, 0x7808, 0x7875, 0x7649, 0x77E8, 0x74B6, 0x7869, 0x7488, 0x78B3, 0x7472, 0x7901, 0x74D2, 0x796F, 0x75D8, 0x799A, 0x76EE, 0x7971, 0x774A, 0x797A, 0x7751, 0x79B4, 0x76A0, 0x79F0, 0x75E4, 0x7A0A, 0x7454, 0x79E1, 0x73AF, 0x7986, 0x7369, 0x7909, 0x7374, 0x7891, 0x739D, 0x783C, 0x73B6, 0x781E, 0x74B7, 0x7768, 0x765D, 0x772C, 0x77ED, 0x7769, 0x7932, 0x77FC, 0x7979, 0x7836, 0x79B8, 0x787B, 0x79DF, 0x7912, 0x7998, 0x7A14, 0x7967, 0x7AB4, 0x796A, 0x7AD8, 0x79C5, 0x7B60, 0x7A9D, 0x7BE9, 0x7B72, 0x7C47, 0x7EBA, 0x7BD6, 0x8206, 0x7CA8, 0x82FA, 0x7C2E, 0x8391, 0x7BB4, 0x83F6, 0x7B40, 0x8413, 0x7AD0, 0x83DD, 0x7A71, 0x838A, 0x7A39, 0x8296, 0x79B7, 0x80F3, 0x78FA, 0x8016, 0x788A, 0x7FB4, 0x7833, 0x7F8D, 0x77DF, 0x7F92, 0x77A9, 0x7FB3, 0x7718, 0x7FF6, 0x76C2, 0x8036, 0x768A, 0x8097, 0x764A, 0x80DF, 0x762A, 0x813C, 0x7605, 0x8275, 0x75D5};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/colors.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/colors.h
new file mode 100644
index 0000000000..1dae8de4b2
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/colors.h
@@ -0,0 +1,117 @@
+/************
+ * colors.h *
+ ************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+namespace Theme {
+
+ #define COLOR_CORRECTION(rgb) ( \
+ (uint32_t((((rgb) & 0xFF0000) >> 16) * 1.00) << 16) | \
+ (uint32_t((((rgb) & 0x00FF00) >> 8) * 1.00) << 8) | \
+ (uint32_t((((rgb) & 0x0000FF) >> 0) * .75) << 0))
+
+ #define COLOR_BLEND(a,b,f) COLOR_CORRECTION( \
+ (uint32_t((((a) & 0xFF0000) >> 16) * f + (((b) & 0xFF0000) >> 16) * (1-f)) << 16) | \
+ (uint32_t((((a) & 0x00FF00) >> 8) * f + (((b) & 0x00FF00) >> 8) * (1-f)) << 8) | \
+ (uint32_t((((a) & 0x0000FF) >> 0) * f + (((b) & 0x0000FF) >> 0) * (1-f)) << 0))
+
+ constexpr uint32_t lulzbot_bg = 0xDEEA5C;
+ constexpr uint32_t lulzbot_fg = 0xC1D82F;
+
+ constexpr uint32_t lulzbot_green = COLOR_BLEND(0xC1DB2F,0x788814,0.33);
+
+ #ifndef LULZBOT_USE_BIOPRINTER_UI
+ constexpr uint32_t theme_darkest = COLOR_CORRECTION(0x444444);
+ constexpr uint32_t theme_dark = COLOR_CORRECTION(0x777777);
+
+ constexpr uint32_t bg_color = theme_darkest;
+ constexpr uint32_t bg_text_disabled = theme_dark;
+ constexpr uint32_t bg_text_enabled = 0xFFFFFF;
+ constexpr uint32_t bg_normal = theme_darkest;
+
+ constexpr uint32_t fg_normal = theme_dark;
+ constexpr uint32_t fg_action = lulzbot_green;
+ constexpr uint32_t fg_disabled = bg_color;
+ #else
+ constexpr uint32_t theme_darkest = 0x545923;
+ constexpr uint32_t theme_dark = lulzbot_bg;
+
+ constexpr uint32_t bg_color = 0xFFFFFF;
+ constexpr uint32_t bg_text_disabled = 0x333333;
+ constexpr uint32_t bg_text_enabled = theme_darkest;
+ constexpr uint32_t bg_normal = theme_dark;
+
+ constexpr uint32_t fg_normal = theme_darkest;
+ constexpr uint32_t fg_action = theme_dark;
+ constexpr uint32_t fg_disabled = 0xEFEFEF;
+
+ constexpr uint32_t shadow_rgb = 0xE0E0E0;
+ constexpr uint32_t fill_rgb = lulzbot_fg;
+ constexpr uint32_t stroke_rgb = theme_darkest;
+ constexpr uint32_t syringe_rgb = 0xF1F6C0;
+ #endif
+
+ constexpr uint32_t x_axis = COLOR_CORRECTION(0xFF0000);
+ constexpr uint32_t y_axis = COLOR_CORRECTION(0x00BB00);
+ constexpr uint32_t z_axis = COLOR_CORRECTION(0x0000FF);
+ #ifndef LULZBOT_USE_BIOPRINTER_UI
+ constexpr uint32_t e_axis = COLOR_CORRECTION(0x777777);
+ constexpr uint32_t feedrate = COLOR_CORRECTION(0x777777);
+ constexpr uint32_t other = COLOR_CORRECTION(0x777777);
+ #else
+ constexpr uint32_t e_axis = 0x000000;
+ constexpr uint32_t feedrate = 0x000000;
+ constexpr uint32_t other = 0x000000;
+ #endif
+
+ // Status screen
+ constexpr uint32_t progress = theme_dark;
+ constexpr uint32_t status_msg = theme_dark;
+ constexpr uint32_t fan_speed = COLOR_CORRECTION(0x3771CB);
+ constexpr uint32_t temp = COLOR_CORRECTION(0x892ca0);
+ constexpr uint32_t axis_label = theme_dark;
+
+ constexpr uint32_t disabled_icon = 0x101010;
+
+ // Calibration Registers Screen
+ constexpr uint32_t transformA = 0x3010D0;
+ constexpr uint32_t transformB = 0x4010D0;
+ constexpr uint32_t transformC = 0x5010D0;
+ constexpr uint32_t transformD = 0x6010D0;
+ constexpr uint32_t transformE = 0x7010D0;
+ constexpr uint32_t transformF = 0x8010D0;
+ constexpr uint32_t transformVal = 0x104010;
+
+ constexpr btn_colors disabled_btn = {.bg = bg_color, .grad = fg_disabled, .fg = fg_disabled, .rgb = fg_disabled };
+ constexpr btn_colors normal_btn = {.bg = fg_action, .grad = 0xFFFFFF, .fg = fg_normal, .rgb = 0xFFFFFF };
+ constexpr btn_colors action_btn = {.bg = bg_color, .grad = 0xFFFFFF, .fg = fg_action, .rgb = 0xFFFFFF };
+ constexpr btn_colors red_btn = {.bg = 0xFF5555, .grad = 0xFFFFFF, .fg = 0xFF0000, .rgb = 0xFFFFFF };
+ constexpr btn_colors ui_slider = {.bg = theme_darkest, .grad = 0xFFFFFF, .fg = theme_dark, .rgb = lulzbot_green };
+ constexpr btn_colors ui_toggle = {.bg = theme_darkest, .grad = 0xFFFFFF, .fg = theme_dark, .rgb = 0xFFFFFF };
+
+ // Temperature color scale
+
+ const rgb_t cool_rgb ( 0, 0, 0);
+ const rgb_t low_rgb (128, 0, 0);
+ const rgb_t med_rgb (255, 128, 0);
+ const rgb_t high_rgb (255, 255, 128);
+};
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/fonts.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/fonts.h
new file mode 100644
index 0000000000..3e5a985cc3
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/fonts.h
@@ -0,0 +1,80 @@
+/***********
+ * fonts.h *
+ ***********/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+namespace Theme {
+ #ifdef TOUCH_UI_800x480
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr int16_t font_tiny = 26;
+ constexpr int16_t font_xsmall = 28;
+ constexpr int16_t font_small = 29;
+ constexpr int16_t font_medium = 30;
+ constexpr int16_t font_large = 30;
+ constexpr int16_t font_xlarge = 31;
+ #else
+ constexpr int16_t font_tiny = 27;
+ constexpr int16_t font_xsmall = 29;
+ constexpr int16_t font_small = 30;
+ constexpr int16_t font_medium = 30;
+ constexpr int16_t font_large = 31;
+ constexpr int16_t font_xlarge = 31;
+ #endif
+ constexpr float icon_scale = 1.0;
+ #elif defined(TOUCH_UI_480x272)
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr int16_t font_tiny = 26;
+ constexpr int16_t font_xsmall = 26;
+ constexpr int16_t font_small = 26;
+ constexpr int16_t font_medium = 27;
+ constexpr int16_t font_large = 28;
+ constexpr int16_t font_xlarge = 29;
+ constexpr float icon_scale = 0.7;
+ #else
+ constexpr int16_t font_tiny = 26;
+ constexpr int16_t font_xsmall = 26;
+ constexpr int16_t font_small = 27;
+ constexpr int16_t font_medium = 28;
+ constexpr int16_t font_large = 30;
+ constexpr int16_t font_xlarge = 31;
+ constexpr float icon_scale = 0.6;
+ #endif
+ #elif defined(TOUCH_UI_320x240)
+ #ifdef TOUCH_UI_PORTRAIT
+ constexpr int16_t font_tiny = 26;
+ constexpr int16_t font_xsmall = 26;
+ constexpr int16_t font_small = 26;
+ constexpr int16_t font_medium = 27;
+ constexpr int16_t font_large = 27;
+ constexpr int16_t font_xlarge = 28;
+ constexpr float icon_scale = 0.6;
+ #else
+ constexpr int16_t font_tiny = 26;
+ constexpr int16_t font_xsmall = 26;
+ constexpr int16_t font_small = 26;
+ constexpr int16_t font_medium = 27;
+ constexpr int16_t font_large = 29;
+ constexpr int16_t font_xlarge = 30;
+ constexpr float icon_scale = 0.5;
+ #endif
+ #endif
+}
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.cpp b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.cpp
new file mode 100644
index 0000000000..163f7160c7
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.cpp
@@ -0,0 +1,410 @@
+/**************
+ * sounds.cpp *
+ **************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#include "../compat.h"
+
+#if ENABLED(LULZBOT_TOUCH_UI)
+
+#include "../ftdi_eve_lib/ftdi_eve_lib.h"
+
+#include "sounds.h"
+
+namespace Theme {
+ using namespace FTDI;
+
+ const PROGMEM SoundPlayer::sound_t chimes[] = {
+ {CHIMES, NOTE_G3, 5},
+ {CHIMES, NOTE_E4, 5},
+ {CHIMES, NOTE_C4, 5},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t sad_trombone[] = {
+ {TRUMPET, NOTE_A3S, 10},
+ {TRUMPET, NOTE_A3 , 10},
+ {TRUMPET, NOTE_G3S, 10},
+ {TRUMPET, NOTE_G3, 20},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t twinkle[] = {
+ {GLOCKENSPIEL, NOTE_C4, 1},
+ {GLOCKENSPIEL, NOTE_E4, 1},
+ {GLOCKENSPIEL, NOTE_G4, 16},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t fanfare[] = {
+ {TRUMPET, NOTE_A3, 4},
+ {SILENCE, REST, 1},
+ {TRUMPET, NOTE_A3, 2},
+ {SILENCE, REST, 1},
+ {TRUMPET, NOTE_A3, 2},
+ {SILENCE, REST, 1},
+ {TRUMPET, NOTE_E4, 10},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t media_inserted[] = {
+ {MUSIC_BOX, NOTE_C4, 2},
+ {MUSIC_BOX, NOTE_E4, 2},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t media_removed[] = {
+ {MUSIC_BOX, NOTE_E4, 2},
+ {MUSIC_BOX, NOTE_C4, 2},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t js_bach_toccata[] = {
+ {ORGAN, NOTE_A4, 2},
+ {ORGAN, NOTE_G4, 2},
+ {ORGAN, NOTE_A4, 35},
+ {SILENCE, REST, 12},
+ {ORGAN, NOTE_G4, 4},
+ {ORGAN, NOTE_F4, 4},
+ {ORGAN, NOTE_E4, 4},
+ {ORGAN, NOTE_D4, 4},
+ {ORGAN, NOTE_C4S, 16},
+ {ORGAN, NOTE_D4, 32},
+ {SILENCE, REST, 42},
+
+ {ORGAN, NOTE_A3, 2},
+ {ORGAN, NOTE_G3, 2},
+ {ORGAN, NOTE_A3, 35},
+ {SILENCE, REST, 9},
+ {ORGAN, NOTE_E3, 8},
+ {ORGAN, NOTE_F3, 8},
+ {ORGAN, NOTE_C3S, 16},
+ {ORGAN, NOTE_D3, 27},
+ {SILENCE, REST, 42},
+
+ {ORGAN, NOTE_A2, 2},
+ {ORGAN, NOTE_G2, 2},
+ {ORGAN, NOTE_A2, 35},
+ {SILENCE, REST, 12},
+ {ORGAN, NOTE_G2, 4},
+ {ORGAN, NOTE_F2, 4},
+ {ORGAN, NOTE_E2, 4},
+ {ORGAN, NOTE_D2, 4},
+ {ORGAN, NOTE_C2S, 16},
+ {ORGAN, NOTE_D2, 32},
+ {SILENCE, REST, 52},
+
+ //{ORGAN, NOTE_D1, 28},
+ {ORGAN, NOTE_C3S, 9},
+ {ORGAN, NOTE_E3, 9},
+ {ORGAN, NOTE_G3, 9},
+ {ORGAN, NOTE_A3S, 9},
+ {ORGAN, NOTE_C4S, 9},
+ {ORGAN, NOTE_E4, 9},
+ {ORGAN, NOTE_D4, 20},
+ {SILENCE, REST, 30},
+
+ {ORGAN, NOTE_C4S, 4},
+ {ORGAN, NOTE_D4, 2},
+ {ORGAN, NOTE_E4, 2},
+
+ {ORGAN, NOTE_C4S, 2},
+ {ORGAN, NOTE_D4, 2},
+ {ORGAN, NOTE_E4, 2},
+
+ {ORGAN, NOTE_C4S, 2},
+ {ORGAN, NOTE_D4, 2},
+ {ORGAN, NOTE_E4, 2},
+
+ {ORGAN, NOTE_C4S, 2},
+ {ORGAN, NOTE_D4, 4},
+ {ORGAN, NOTE_E4, 4},
+ {ORGAN, NOTE_F4, 2},
+ {ORGAN, NOTE_G4, 2},
+
+ {ORGAN, NOTE_E4, 2},
+ {ORGAN, NOTE_F4, 2},
+ {ORGAN, NOTE_G4, 2},
+
+ {ORGAN, NOTE_E4, 2},
+ {ORGAN, NOTE_F4, 2},
+ {ORGAN, NOTE_G4, 2},
+
+ {ORGAN, NOTE_E4, 2},
+ {ORGAN, NOTE_F4, 4},
+ {ORGAN, NOTE_G4, 4},
+ {ORGAN, NOTE_A4, 2},
+ {ORGAN, NOTE_A4S, 2},
+
+ {ORGAN, NOTE_G4, 2},
+ {ORGAN, NOTE_A4, 2},
+ {ORGAN, NOTE_A4S, 2},
+
+ {ORGAN, NOTE_G4, 2},
+ {ORGAN, NOTE_A4, 2},
+ {ORGAN, NOTE_A4S, 2},
+
+ {ORGAN, NOTE_G4, 2},
+ {ORGAN, NOTE_A4, 4},
+ {SILENCE, REST, 36},
+
+
+ {ORGAN, NOTE_C5S, 4},
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_E5, 2},
+
+ {ORGAN, NOTE_C5S, 2},
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_E5, 2},
+
+ {ORGAN, NOTE_C5S, 2},
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_E5, 2},
+
+ {ORGAN, NOTE_C5S, 2},
+ {ORGAN, NOTE_D5, 4},
+ {ORGAN, NOTE_E5, 4},
+ {ORGAN, NOTE_F5, 2},
+ {ORGAN, NOTE_G5, 2},
+
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_F5, 2},
+ {ORGAN, NOTE_G5, 2},
+
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_F5, 2},
+ {ORGAN, NOTE_G5, 2},
+
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_F5, 4},
+ {ORGAN, NOTE_G5, 4},
+ {ORGAN, NOTE_A5, 2},
+ {ORGAN, NOTE_A5S, 2},
+
+ {ORGAN, NOTE_G5, 2},
+ {ORGAN, NOTE_A5, 2},
+ {ORGAN, NOTE_A5S, 2},
+
+ {ORGAN, NOTE_G5, 2},
+ {ORGAN, NOTE_A5, 2},
+ {ORGAN, NOTE_A5S, 2},
+
+ {ORGAN, NOTE_G5, 2},
+ {ORGAN, NOTE_A5, 4},
+ {SILENCE, REST, 32},
+
+ {ORGAN, NOTE_A5, 4},
+ {ORGAN, NOTE_G5, 2},
+ {ORGAN, NOTE_A5S, 2},
+
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_G5, 2},
+ {ORGAN, NOTE_A5S, 2},
+
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_F5, 2},
+ {ORGAN, NOTE_A5, 2},
+
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_F5, 2},
+ {ORGAN, NOTE_G5, 2},
+
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_A5, 2},
+
+ {ORGAN, NOTE_C5, 2},
+ {ORGAN, NOTE_E5, 2},
+ {ORGAN, NOTE_A5, 2},
+
+ {ORGAN, NOTE_C5, 2},
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_F5, 2},
+
+ {ORGAN, NOTE_A4S, 2},
+ {ORGAN, NOTE_D5, 2},
+ {ORGAN, NOTE_E5, 2},
+
+ {ORGAN, NOTE_A4S, 2},
+ {ORGAN, NOTE_C5, 2},
+ {ORGAN, NOTE_E5, 2},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t js_bach_joy[] = {
+ {PIANO, NOTE_G3, 4},
+ {PIANO, NOTE_A3, 4},
+ {PIANO, NOTE_B3, 4},
+ {PIANO, NOTE_D4, 3},
+ {SILENCE, REST, 1},
+
+ {PIANO, NOTE_C4, 3},
+ {SILENCE, REST, 1},
+ {PIANO, NOTE_C4, 4},
+ {PIANO, NOTE_E4, 3},
+ {SILENCE, REST, 1},
+ {PIANO, NOTE_D4, 2},
+ {SILENCE, REST, 2},
+
+ {PIANO, NOTE_D4, 4},
+ {PIANO, NOTE_G4 , 3},
+ {SILENCE, REST, 1},
+ {PIANO, NOTE_F4S, 4},
+ {PIANO, NOTE_G4, 4},
+
+ {PIANO, NOTE_D4, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_B3, 3},
+ {SILENCE, REST, 1},
+ {PIANO, NOTE_G3, 4},
+ {PIANO, NOTE_A3, 2},
+ {SILENCE, REST, 2},
+
+ {PIANO, NOTE_B3, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_C4, 4},
+ {PIANO, NOTE_D4, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_E4, 2},
+ {SILENCE, REST, 2},
+
+ {PIANO, NOTE_D4, 4},
+ {PIANO, NOTE_C4, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_B3, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_A3, 4},
+
+ {PIANO, NOTE_B3, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_G3, 2},
+ {SILENCE, REST, 2},
+ {PIANO, NOTE_G3, 8},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t big_band[] = {
+ {XYLOPHONE, NOTE_F4, 3},
+ {XYLOPHONE, NOTE_G4, 3},
+ {XYLOPHONE, NOTE_F4, 3},
+ {XYLOPHONE, NOTE_D4, 3},
+ {XYLOPHONE, NOTE_A3S, 3},
+ {SILENCE, REST, 3},
+
+ {TRUMPET, NOTE_F4, 3},
+ {TRUMPET, NOTE_G4, 3},
+ {TRUMPET, NOTE_F4, 3},
+ {TRUMPET, NOTE_D4, 3},
+ {TRUMPET, NOTE_A3S, 3},
+ {SILENCE, REST, 3},
+
+ {TUBA, NOTE_A2S, 6},
+ {TUBA, NOTE_A2S, 6},
+ {TUBA, NOTE_A2S, 4},
+ {TUBA, NOTE_A2S, 6},
+ {TUBA, NOTE_A2S, 6},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t beats[] = {
+ {SILENCE, REST, 8},
+ {NOTCH, NOTE_C4, 8},
+ {KICKDRUM, NOTE_C4, 8},
+ {HIHAT, NOTE_C4, 8},
+ {COWBELL, NOTE_C4, 8},
+ {SILENCE, REST, 8},
+ {NOTCH, NOTE_C4, 8},
+ {KICKDRUM, NOTE_C4, 8},
+ {HIHAT, NOTE_C4, 8},
+ {COWBELL, NOTE_C4, 8},
+ {SILENCE, REST, 8},
+ {NOTCH, NOTE_C4, 8},
+ {KICKDRUM, NOTE_C4, 8},
+ {HIHAT, NOTE_C4, 8},
+ {COWBELL, NOTE_C4, 8},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t beeping[] = {
+ {BEEPING, NOTE_C4, 64},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t alarm[] = {
+ {ALARM, NOTE_C4, 64},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t warble[] = {
+ {WARBLE, NOTE_C4, 64},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t carousel[] = {
+ {CAROUSEL, NOTE_C4, 64},
+ {SILENCE, END_SONG, 0}
+ };
+
+ const PROGMEM SoundPlayer::sound_t all_instruments[] = {
+ {HARP},
+ {XYLOPHONE},
+ {TUBA},
+ {GLOCKENSPIEL},
+ {ORGAN},
+ {TRUMPET},
+ {PIANO},
+ {CHIMES},
+ {MUSIC_BOX},
+ {BELL},
+ {CLICK},
+ {SWITCH},
+ {COWBELL},
+ {NOTCH},
+ {HIHAT},
+ {KICKDRUM},
+ {SWITCH},
+ {POP},
+ {CLACK},
+ {CHACK},
+ {SILENCE, END_SONG, 0}
+ };
+}; // namespace Theme
+
+#define N_ELEMENTS(a) (sizeof(a)/sizeof(a[0]))
+
+const SoundList::list_t SoundList::list[] = {
+ {"Silence", FTDI::silence},
+ {"Twinkle", Theme::twinkle},
+ {"Chimes", Theme::chimes},
+ {"Fanfare", Theme::fanfare},
+ {"Sad Trombone", Theme::sad_trombone},
+ {"Big Band", Theme::big_band},
+ {"Beeping", Theme::beeping},
+ {"Alarm", Theme::alarm},
+ {"Warble", Theme::warble},
+ {"Carousel", Theme::carousel},
+ {"Beats", Theme::beats},
+ {"Bach Joy", Theme::js_bach_joy},
+ {"Bach Toccata", Theme::js_bach_toccata}
+};
+
+const uint8_t SoundList::n = N_ELEMENTS(SoundList::list);
+
+#endif // LULZBOT_TOUCH_UI
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.h
new file mode 100644
index 0000000000..c728d0012f
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/sounds.h
@@ -0,0 +1,43 @@
+/************
+ * sounds.h *
+ ************/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+namespace Theme {
+ using namespace FTDI;
+
+ extern const PROGMEM SoundPlayer::sound_t chimes[];
+ extern const PROGMEM SoundPlayer::sound_t sad_trombone[];
+ extern const PROGMEM SoundPlayer::sound_t twinkle[];
+ extern const PROGMEM SoundPlayer::sound_t fanfare[];
+ extern const PROGMEM SoundPlayer::sound_t media_inserted[];
+ extern const PROGMEM SoundPlayer::sound_t media_removed[];
+ extern const PROGMEM SoundPlayer::sound_t js_bach_toccata[];
+ extern const PROGMEM SoundPlayer::sound_t js_bach_joy[];
+ extern const PROGMEM SoundPlayer::sound_t big_band[];
+ extern const PROGMEM SoundPlayer::sound_t beats[];
+ extern const PROGMEM SoundPlayer::sound_t beeping[];
+ extern const PROGMEM SoundPlayer::sound_t alarm[];
+ extern const PROGMEM SoundPlayer::sound_t warble[];
+ extern const PROGMEM SoundPlayer::sound_t carousel[];
+ extern const PROGMEM SoundPlayer::sound_t all_instruments[];
+}; // namespace Theme
diff --git a/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/theme.h b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/theme.h
new file mode 100644
index 0000000000..6a73a07163
--- /dev/null
+++ b/Marlin/src/lcd/extensible_ui/lib/lulzbot/theme/theme.h
@@ -0,0 +1,28 @@
+/***********
+ * theme.h *
+ ***********/
+
+/****************************************************************************
+ * Written By Mark Pelletier 2017 - Aleph Objects, Inc. *
+ * Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
+ * *
+ * This program is free software: you can redistribute it and/or modify *
+ * it under the terms of the GNU General Public License as published by *
+ * the Free Software Foundation, either version 3 of the License, or *
+ * (at your option) any later version. *
+ * *
+ * This program is distributed in the hope that it will be useful, *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
+ * *
+ * To view a copy of the GNU General Public License, go to the following *
+ * location: . *
+ ****************************************************************************/
+
+#pragma once
+
+#include "bitmaps.h"
+#include "colors.h"
+#include "fonts.h"
+#include "sounds.h"
diff --git a/Marlin/src/lcd/menu/menu_game.cpp b/Marlin/src/lcd/menu/menu_game.cpp
index f5eb60a879..36b7f18314 100644
--- a/Marlin/src/lcd/menu/menu_game.cpp
+++ b/Marlin/src/lcd/menu/menu_game.cpp
@@ -46,4 +46,3 @@ void menu_game() {
}
#endif // HAS_GAME_MENU
-
diff --git a/Marlin/src/module/stepper_indirection.h b/Marlin/src/module/stepper_indirection.h
index b0688a9a08..635ee1b033 100644
--- a/Marlin/src/module/stepper_indirection.h
+++ b/Marlin/src/module/stepper_indirection.h
@@ -118,7 +118,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define X_STEP_INIT SET_OUTPUT(X_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(X)
- #define X_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X_STEP_PIN); } while(0)
+ #define X_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(X_STEP_PIN); }while(0)
#else
#define X_STEP_WRITE(STATE) WRITE(X_STEP_PIN,STATE)
#endif
@@ -157,7 +157,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define Y_STEP_INIT SET_OUTPUT(Y_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(Y)
- #define Y_STEP_WRITE(STATE) do { if (STATE) TOGGLE(Y_STEP_PIN); } while(0)
+ #define Y_STEP_WRITE(STATE) do{ if (STATE) TOGGLE(Y_STEP_PIN); }while(0)
#else
#define Y_STEP_WRITE(STATE) WRITE(Y_STEP_PIN,STATE)
#endif
@@ -196,7 +196,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define Z_STEP_INIT SET_OUTPUT(Z_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(Z)
- #define Z_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z_STEP_PIN); } while(0)
+ #define Z_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z_STEP_PIN); }while(0)
#else
#define Z_STEP_WRITE(STATE) WRITE(Z_STEP_PIN,STATE)
#endif
@@ -236,7 +236,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define X2_STEP_INIT SET_OUTPUT(X2_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(X2)
- #define X2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(X2_STEP_PIN); } while(0)
+ #define X2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(X2_STEP_PIN); }while(0)
#else
#define X2_STEP_WRITE(STATE) WRITE(X2_STEP_PIN,STATE)
#endif
@@ -278,7 +278,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define Y2_STEP_INIT SET_OUTPUT(Y2_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(Y2)
- #define Y2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Y2_STEP_PIN); } while(0)
+ #define Y2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Y2_STEP_PIN); }while(0)
#else
#define Y2_STEP_WRITE(STATE) WRITE(Y2_STEP_PIN,STATE)
#endif
@@ -322,7 +322,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define Z2_STEP_INIT SET_OUTPUT(Z2_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(Z2)
- #define Z2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z2_STEP_PIN); } while(0)
+ #define Z2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z2_STEP_PIN); }while(0)
#else
#define Z2_STEP_WRITE(STATE) WRITE(Z2_STEP_PIN,STATE)
#endif
@@ -366,7 +366,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define Z3_STEP_INIT SET_OUTPUT(Z3_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(Z3)
- #define Z3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(Z3_STEP_PIN); } while(0)
+ #define Z3_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(Z3_STEP_PIN); }while(0)
#else
#define Z3_STEP_WRITE(STATE) WRITE(Z3_STEP_PIN,STATE)
#endif
@@ -409,7 +409,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E0_STEP_INIT SET_OUTPUT(E0_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(E0)
- #define E0_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E0_STEP_PIN); } while(0)
+ #define E0_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E0_STEP_PIN); }while(0)
#else
#define E0_STEP_WRITE(STATE) WRITE(E0_STEP_PIN,STATE)
#endif
@@ -448,7 +448,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E1_STEP_INIT SET_OUTPUT(E1_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(E1)
- #define E1_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E1_STEP_PIN); } while(0)
+ #define E1_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E1_STEP_PIN); }while(0)
#else
#define E1_STEP_WRITE(STATE) WRITE(E1_STEP_PIN,STATE)
#endif
@@ -487,7 +487,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E2_STEP_INIT SET_OUTPUT(E2_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(E2)
- #define E2_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E2_STEP_PIN); } while(0)
+ #define E2_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E2_STEP_PIN); }while(0)
#else
#define E2_STEP_WRITE(STATE) WRITE(E2_STEP_PIN,STATE)
#endif
@@ -526,7 +526,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E3_STEP_INIT SET_OUTPUT(E3_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(E3)
- #define E3_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E3_STEP_PIN); } while(0)
+ #define E3_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E3_STEP_PIN); }while(0)
#else
#define E3_STEP_WRITE(STATE) WRITE(E3_STEP_PIN,STATE)
#endif
@@ -565,7 +565,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E4_STEP_INIT SET_OUTPUT(E4_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(E4)
- #define E4_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E4_STEP_PIN); } while(0)
+ #define E4_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E4_STEP_PIN); }while(0)
#else
#define E4_STEP_WRITE(STATE) WRITE(E4_STEP_PIN,STATE)
#endif
@@ -604,7 +604,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#endif
#define E5_STEP_INIT SET_OUTPUT(E5_STEP_PIN)
#if AXIS_HAS_SQUARE_WAVE(E5)
- #define E5_STEP_WRITE(STATE) do { if(STATE) TOGGLE(E5_STEP_PIN); } while(0)
+ #define E5_STEP_WRITE(STATE) do{ if(STATE) TOGGLE(E5_STEP_PIN); }while(0)
#else
#define E5_STEP_WRITE(STATE) WRITE(E5_STEP_PIN,STATE)
#endif
@@ -701,7 +701,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); RDIR(2); } else _REV_E_DIR(E); }while(0)
#endif
#else
- #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); } while(0)
+ #define DUPE(T,V) do{ _DUPE(0,T,V); _DUPE(1,T,V); }while(0)
#define NORM_E_DIR(E) do{ if (extruder_duplication_enabled) { NDIR(0); NDIR(1); } else _NORM_E_DIR(E); }while(0)
#define REV_E_DIR(E) do{ if (extruder_duplication_enabled) { RDIR(0); RDIR(1); } else _REV_E_DIR(E); }while(0)
#endif
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index ed8dd4095c..b0ac655286 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -938,7 +938,7 @@
#define LCD_PINS_D4 -1
#endif
-#if HAS_CHARACTER_LCD
+#if HAS_CHARACTER_LCD || TOUCH_UI_ULTIPANEL
#ifndef LCD_PINS_D5
#define LCD_PINS_D5 -1
#endif
diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
index 56a597ffc3..afcd6a6d69 100644
--- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
+++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h
@@ -149,11 +149,11 @@
//
// LCD / Controller
//
-#if HAS_SPI_LCD
+#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#define KILL_PIN 32
- #if ENABLED(NEWPANEL)
+ #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 85
@@ -176,5 +176,5 @@
#define BEEPER_PIN 84 // AUX-4
#define SD_DETECT_PIN 15
- #endif // NEWPANEL
+ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h
index 675f5e3de0..fece684782 100644
--- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h
+++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h
@@ -163,11 +163,11 @@
//
// LCD / Controller
//
-#if HAS_SPI_LCD
+#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#define KILL_PIN 32
- #if ENABLED(NEWPANEL)
+ #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#if ENABLED(CR10_STOCKDISPLAY)
#define LCD_PINS_RS 85
@@ -188,7 +188,8 @@
#define BTN_ENC 9 // AUX-2
#define BEEPER_PIN 84 // AUX-4
+
#define SD_DETECT_PIN 15
- #endif // NEWPANEL
+ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h
index da4f77f7dd..ccb4fb8b5c 100644
--- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h
+++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h
@@ -141,13 +141,13 @@
//
// LCD / Controller
//
-#if HAS_SPI_LCD
+#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#if !MB(MINIRAMBO_10A)
#define KILL_PIN 32
#endif
- #if ENABLED(NEWPANEL)
+ #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#if MB(MINIRAMBO_10A)
@@ -187,6 +187,6 @@
#endif // !MINIRAMBO_10A
- #endif // NEWPANEL
+ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h
index 10a6a1b5b9..99b467fbff 100644
--- a/Marlin/src/pins/rambo/pins_RAMBO.h
+++ b/Marlin/src/pins/rambo/pins_RAMBO.h
@@ -169,11 +169,11 @@
//
// LCD / Controller
//
-#if HAS_SPI_LCD
+#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#define KILL_PIN 80
- #if ENABLED(NEWPANEL)
+ #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
#define LCD_PINS_RS 70
#define LCD_PINS_ENABLE 71
diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h
index 95200adb34..a6975ed32b 100644
--- a/Marlin/src/pins/sam/pins_ARCHIM2.h
+++ b/Marlin/src/pins/sam/pins_ARCHIM2.h
@@ -231,7 +231,7 @@
//
// LCD / Controller
//
-#if HAS_SPI_LCD
+#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL
#define BEEPER_PIN 23 // D24 PA15_CTS1
#define LCD_PINS_RS 17 // D17 PA12_RXD1
#define LCD_PINS_ENABLE 24 // D23 PA14_RTS1
@@ -242,10 +242,10 @@
#define SD_DETECT_PIN 2 // D2 PB25_TIOA0
- #if ENABLED(NEWPANEL)
+ #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL
// Buttons on AUX-2
#define BTN_EN1 60 // D60 PA3_TIOB1
#define BTN_EN2 13 // D13 PB27_TIOB0
#define BTN_ENC 16 // D16 PA13_TXD1 // the click
- #endif // NEWPANEL
+ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL
#endif // HAS_SPI_LCD
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
index 2744d43b15..90b1802576 100644
--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#define LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
index 2a55fb9310..188cb32cf0 100644
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
index 72a38c7519..6a6578b159 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -2064,6 +2064,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
index 0d01c80f59..4d25a2829b 100644
--- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h
index 3a78a9164f..2b2b8c72de 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -2053,6 +2053,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 0a5d1fcca0..ceafbd6dda 100644
--- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
index 819ad38371..2a85f6437f 100644
--- a/config/examples/Alfawise/U20/Configuration.h
+++ b/config/examples/Alfawise/U20/Configuration.h
@@ -2123,6 +2123,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
index 0e50ac43a8..b6f4a63a48 100644
--- a/config/examples/Alfawise/U20/Configuration_adv.h
+++ b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1146,6 +1146,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
index cc5fc2de98..70446ed7b3 100644
--- a/config/examples/AliExpress/CL-260/Configuration.h
+++ b/config/examples/AliExpress/CL-260/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
index 896150c28e..de2d707c75 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -2044,6 +2044,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
index 188529d99f..9d2c7e6ecf 100644
--- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h
+++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
index 5043f68263..910955ab85 100644
--- a/config/examples/Anet/A2/Configuration.h
+++ b/config/examples/Anet/A2/Configuration.h
@@ -2035,6 +2035,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
index 7c7c27a511..f89b5620f4 100644
--- a/config/examples/Anet/A2/Configuration_adv.h
+++ b/config/examples/Anet/A2/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
index 10710ca9dd..749644ef7f 100644
--- a/config/examples/Anet/A2plus/Configuration.h
+++ b/config/examples/Anet/A2plus/Configuration.h
@@ -2035,6 +2035,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
index 7c7c27a511..f89b5620f4 100644
--- a/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
index 7f3103b4de..3155687958 100644
--- a/config/examples/Anet/A6/Configuration.h
+++ b/config/examples/Anet/A6/Configuration.h
@@ -2186,6 +2186,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
index 1e1cfe6ca4..72d8f82793 100644
--- a/config/examples/Anet/A6/Configuration_adv.h
+++ b/config/examples/Anet/A6/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
index ecd11e1b5a..7f3ae8fa22 100644
--- a/config/examples/Anet/A8/Configuration.h
+++ b/config/examples/Anet/A8/Configuration.h
@@ -2048,6 +2048,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
index c96ee1e255..f4b5abaddb 100644
--- a/config/examples/Anet/A8/Configuration_adv.h
+++ b/config/examples/Anet/A8/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
index 1a46884075..24393d5ce3 100644
--- a/config/examples/Anet/A8plus/Configuration.h
+++ b/config/examples/Anet/A8plus/Configuration.h
@@ -2044,6 +2044,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
index 37f20f857c..3fb97e835b 100644
--- a/config/examples/Anet/A8plus/Configuration_adv.h
+++ b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h
index 9a41b94764..c5a3aeb61f 100644
--- a/config/examples/Anet/E16/Configuration.h
+++ b/config/examples/Anet/E16/Configuration.h
@@ -2045,6 +2045,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h
index 4cbbcd3e11..b26d825978 100644
--- a/config/examples/Anet/E16/Configuration_adv.h
+++ b/config/examples/Anet/E16/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h
index 2617490f2d..3d589d57ce 100644
--- a/config/examples/AnyCubic/i3/Configuration.h
+++ b/config/examples/AnyCubic/i3/Configuration.h
@@ -2043,6 +2043,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h
index 762b69495f..c7906c7a84 100644
--- a/config/examples/AnyCubic/i3/Configuration_adv.h
+++ b/config/examples/AnyCubic/i3/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h
index 4a95143208..7b7f35e678 100644
--- a/config/examples/ArmEd/Configuration.h
+++ b/config/examples/ArmEd/Configuration.h
@@ -2034,6 +2034,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h
index 7aec83f2c3..7af9715dc7 100644
--- a/config/examples/ArmEd/Configuration_adv.h
+++ b/config/examples/ArmEd/Configuration_adv.h
@@ -1147,6 +1147,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h
index 13b6bfd107..8150eb1e75 100644
--- a/config/examples/Azteeg/X5GT/Configuration.h
+++ b/config/examples/Azteeg/X5GT/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h
index 4eea9611d2..4996ed7289 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index 96599118bd..53d2a1c5cd 100644
--- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h
index 942030381c..1ccc892b77 100644
--- a/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/config/examples/BIBO/TouchX/default/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 80a4bffc51..79d28911e8 100644
--- a/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h
index e4088ad112..398878ef47 100644
--- a/config/examples/BQ/Hephestos/Configuration.h
+++ b/config/examples/BQ/Hephestos/Configuration.h
@@ -2021,6 +2021,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h
index 7e26bb7648..a94a1caa58 100644
--- a/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h
index 5deedb2cd7..4b2d45e339 100644
--- a/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/config/examples/BQ/Hephestos_2/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 98d45b4dd3..e8fa993150 100644
--- a/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -1151,6 +1151,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h
index 32a53cec7b..6ac8b734ec 100644
--- a/config/examples/BQ/WITBOX/Configuration.h
+++ b/config/examples/BQ/WITBOX/Configuration.h
@@ -2021,6 +2021,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h
index 7e26bb7648..a94a1caa58 100644
--- a/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 05142d8ab8..8f93e8fbbe 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -2032,6 +2032,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h
index 5e7def1c03..7cc53f2e07 100644
--- a/config/examples/Cartesio/Configuration_adv.h
+++ b/config/examples/Cartesio/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h
index caaf96e13f..45c4793708 100644
--- a/config/examples/Creality/CR-10/Configuration.h
+++ b/config/examples/Creality/CR-10/Configuration.h
@@ -2043,6 +2043,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h
index b4f915db75..253a57717e 100644
--- a/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/config/examples/Creality/CR-10/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h
index b3f8f667b4..a8556daa96 100644
--- a/config/examples/Creality/CR-10S/Configuration.h
+++ b/config/examples/Creality/CR-10S/Configuration.h
@@ -2034,6 +2034,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h
index 6b9fef608d..439f835ecf 100644
--- a/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h
index 5ae4f2cb18..1be716c2f3 100644
--- a/config/examples/Creality/CR-10_5S/Configuration.h
+++ b/config/examples/Creality/CR-10_5S/Configuration.h
@@ -2036,6 +2036,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h
index d3b14d6a10..29f290508a 100644
--- a/config/examples/Creality/CR-10_5S/Configuration_adv.h
+++ b/config/examples/Creality/CR-10_5S/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h
index e90f053d21..8ecb7f3a1b 100644
--- a/config/examples/Creality/CR-10mini/Configuration.h
+++ b/config/examples/Creality/CR-10mini/Configuration.h
@@ -2052,6 +2052,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h
index 9b40688bb9..967f29b94e 100644
--- a/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h
index ef0a822fa9..90e232096e 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration.h
+++ b/config/examples/Creality/CR-20 Pro/Configuration.h
@@ -2036,6 +2036,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
index 8d4ae80c8c..f4728f2e17 100644
--- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h
+++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h
index b2bda3c250..0e782bc3a1 100644
--- a/config/examples/Creality/CR-20/Configuration.h
+++ b/config/examples/Creality/CR-20/Configuration.h
@@ -2036,6 +2036,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h
index 1c6c91252a..60373afe17 100644
--- a/config/examples/Creality/CR-20/Configuration_adv.h
+++ b/config/examples/Creality/CR-20/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h
index d7279c3c24..a8771aa13a 100644
--- a/config/examples/Creality/CR-8/Configuration.h
+++ b/config/examples/Creality/CR-8/Configuration.h
@@ -2043,6 +2043,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h
index ed08c8b096..abc5bd1275 100644
--- a/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/config/examples/Creality/CR-8/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h
index 10d2b959dd..7cc74ed631 100644
--- a/config/examples/Creality/Ender-2/Configuration.h
+++ b/config/examples/Creality/Ender-2/Configuration.h
@@ -2037,6 +2037,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h
index c4ae7ae5ed..37a868c6f3 100644
--- a/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h
index 24ada10369..30845b1109 100644
--- a/config/examples/Creality/Ender-3/Configuration.h
+++ b/config/examples/Creality/Ender-3/Configuration.h
@@ -2037,6 +2037,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h
index e6d8a5f487..3b2b8542ea 100644
--- a/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h
index bf52448c17..6b8d9dfd0f 100644
--- a/config/examples/Creality/Ender-4/Configuration.h
+++ b/config/examples/Creality/Ender-4/Configuration.h
@@ -2043,6 +2043,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h
index 658816c66d..92c19a4197 100644
--- a/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h
index 7290d3c3c9..2d69021115 100644
--- a/config/examples/Creality/Ender-5/Configuration.h
+++ b/config/examples/Creality/Ender-5/Configuration.h
@@ -2036,6 +2036,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h
index 515ed8ff67..4086ac71c8 100644
--- a/config/examples/Creality/Ender-5/Configuration_adv.h
+++ b/config/examples/Creality/Ender-5/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h
index 086e254d87..183a86b969 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
index dcce6aaa0c..e51678c19d 100644
--- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
+++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
index ebfaea4b8a..e665c3f924 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
index 5b0c8ecaab..a70e01ae67 100755
--- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
+++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h
index 3c34ac1693..9566ea6e08 100644
--- a/config/examples/Einstart-S/Configuration.h
+++ b/config/examples/Einstart-S/Configuration.h
@@ -2043,6 +2043,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h
index a817b71e37..fa62f73b9c 100644
--- a/config/examples/Einstart-S/Configuration_adv.h
+++ b/config/examples/Einstart-S/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h
index 039af73bff..564fa808ef 100644
--- a/config/examples/FYSETC/AIO_II/Configuration.h
+++ b/config/examples/FYSETC/AIO_II/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h
index 28d3d3768f..9c7a1d296c 100644
--- a/config/examples/FYSETC/AIO_II/Configuration_adv.h
+++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
index 2d53de4a56..6a673d1678 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h
@@ -2039,6 +2039,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
index 9c2eba4cc8..c1b2fd2a30 100644
--- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
index 60dd4a069f..30262687d1 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
index 8f3c43cb65..13faa4a85d 100644
--- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
index 4508637ecd..175ae500a9 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h
@@ -2021,6 +2021,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
index 04a5110173..26021ab8db 100644
--- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h
index 32cbd2f0a4..d8a6ef9b93 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
index 04a5110173..26021ab8db 100644
--- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
+++ b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h
index da991ed986..b91f18f2db 100644
--- a/config/examples/FYSETC/F6_13/Configuration.h
+++ b/config/examples/FYSETC/F6_13/Configuration.h
@@ -2035,6 +2035,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h
index 5eb4921e76..032a934424 100644
--- a/config/examples/FYSETC/F6_13/Configuration_adv.h
+++ b/config/examples/FYSETC/F6_13/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h
index 40c9a2fb9d..96f8ffae3d 100644
--- a/config/examples/Felix/Configuration.h
+++ b/config/examples/Felix/Configuration.h
@@ -2015,6 +2015,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Felix/Configuration_adv.h b/config/examples/Felix/Configuration_adv.h
index 62bbeb99d0..28e25be2e8 100644
--- a/config/examples/Felix/Configuration_adv.h
+++ b/config/examples/Felix/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h
index 410c533730..78d5b4e745 100644
--- a/config/examples/Felix/DUAL/Configuration.h
+++ b/config/examples/Felix/DUAL/Configuration.h
@@ -2015,6 +2015,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h
index 180ba94ba0..80d9f15670 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration.h
@@ -2024,6 +2024,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
index 9cf659dfa7..abbc50c813 100644
--- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h
index 6db4614280..167e79b64a 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -2039,6 +2039,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index b44e973bfb..0ffbe2c0b8 100644
--- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h
index c127374121..af39334300 100644
--- a/config/examples/Formbot/Raptor/Configuration.h
+++ b/config/examples/Formbot/Raptor/Configuration.h
@@ -2138,6 +2138,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h
index 5e0bb4f712..e75a274b51 100644
--- a/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h
index ff82069ab8..0d1882fe5e 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -2067,6 +2067,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index df2f8b38e8..c6aa91b5ff 100644
--- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -1147,6 +1147,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h
index ca14491baf..b2339cf5b9 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -2061,6 +2061,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index 8ba7354e0f..a7a02daa8e 100644
--- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -1147,6 +1147,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 7e0fb6b8bf..5c7b525961 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -2018,6 +2018,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h
index c71af2db68..e1aa85b6e1 100644
--- a/config/examples/Geeetech/A10/Configuration_adv.h
+++ b/config/examples/Geeetech/A10/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 6dec6f844b..740b105b1f 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -2018,6 +2018,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h
index c66386e834..cfbc57e243 100644
--- a/config/examples/Geeetech/A10M/Configuration_adv.h
+++ b/config/examples/Geeetech/A10M/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 702017db73..3c6a193ec1 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -2020,6 +2020,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h
index f7a2bb6724..a3b35d82e7 100644
--- a/config/examples/Geeetech/A20M/Configuration_adv.h
+++ b/config/examples/Geeetech/A20M/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h
index b79a7b2310..7ff2517878 100644
--- a/config/examples/Geeetech/GT2560/Configuration.h
+++ b/config/examples/Geeetech/GT2560/Configuration.h
@@ -2048,6 +2048,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index 7c5102b704..aec16d1536 100644
--- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h
index c89d380995..7d7d77d0a6 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -2040,6 +2040,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 3cb8545fe1..64fa20cc7e 100644
--- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 287178a539..666c5c9c55 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -2054,6 +2054,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 62c8da63dc..c5c9718671 100644
--- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -2053,6 +2053,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 1b905488f5..0d078bf6af 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index c71af2db68..e1aa85b6e1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 924bb67f94..1d7f93d835 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index c71af2db68..e1aa85b6e1 100644
--- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h
index d60bdece1b..237f8ba00c 100644
--- a/config/examples/Infitary/i3-M508/Configuration.h
+++ b/config/examples/Infitary/i3-M508/Configuration.h
@@ -2037,6 +2037,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h
index 1f8a9f5773..f9547fa674 100644
--- a/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 43436a4e4f..f2e0df352f 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -2041,6 +2041,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h
index 301739e32e..b4e9e1f0b5 100644
--- a/config/examples/JGAurora/A1/Configuration_adv.h
+++ b/config/examples/JGAurora/A1/Configuration_adv.h
@@ -1148,6 +1148,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index 0fbcf2ec0d..857ced38b8 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -2045,6 +2045,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index e3acecfb38..75cacb7fd8 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index 898d333ca6..79a55764a4 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -2041,6 +2041,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h
index 301739e32e..b4e9e1f0b5 100644
--- a/config/examples/JGAurora/A5S/Configuration_adv.h
+++ b/config/examples/JGAurora/A5S/Configuration_adv.h
@@ -1148,6 +1148,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h
index 4700d5878a..ffdbdcd815 100644
--- a/config/examples/MakerParts/Configuration.h
+++ b/config/examples/MakerParts/Configuration.h
@@ -2053,6 +2053,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h
index f5537b5065..93be7b1d10 100644
--- a/config/examples/MakerParts/Configuration_adv.h
+++ b/config/examples/MakerParts/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h
index 890b8d4c7b..6be371d1b6 100644
--- a/config/examples/Malyan/M150/Configuration.h
+++ b/config/examples/Malyan/M150/Configuration.h
@@ -2061,6 +2061,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h
index 92d8442bc6..f9bb93850c 100644
--- a/config/examples/Malyan/M150/Configuration_adv.h
+++ b/config/examples/Malyan/M150/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h
index 39fbccdaf7..b1259de5b5 100644
--- a/config/examples/Malyan/M200/Configuration.h
+++ b/config/examples/Malyan/M200/Configuration.h
@@ -2032,6 +2032,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h
index 9d1b947717..797e31e335 100644
--- a/config/examples/Malyan/M200/Configuration_adv.h
+++ b/config/examples/Malyan/M200/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h
index 44fc963c8f..4d145bb028 100644
--- a/config/examples/Micromake/C1/basic/Configuration.h
+++ b/config/examples/Micromake/C1/basic/Configuration.h
@@ -2037,6 +2037,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h
index 9a2867bc3f..39335a990a 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -2037,6 +2037,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index 27964f93fe..1fb931c2e9 100644
--- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h
index b8d3e60288..343cbfb201 100644
--- a/config/examples/Mks/Robin/Configuration.h
+++ b/config/examples/Mks/Robin/Configuration.h
@@ -2035,6 +2035,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h
index 9f608558af..7841226432 100644
--- a/config/examples/Mks/Robin/Configuration_adv.h
+++ b/config/examples/Mks/Robin/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h
index e9c7159e53..9583422333 100644
--- a/config/examples/Mks/Sbase/Configuration.h
+++ b/config/examples/Mks/Sbase/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h
index 1f7586ebfc..d5a173be84 100644
--- a/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/config/examples/Mks/Sbase/Configuration_adv.h
@@ -1144,6 +1144,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h
index d6085cf86b..f06a8b254c 100644
--- a/config/examples/Printrbot/PrintrboardG2/Configuration.h
+++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h
@@ -2041,6 +2041,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h
index c54e613948..1fee434f57 100644
--- a/config/examples/RapideLite/RL200/Configuration.h
+++ b/config/examples/RapideLite/RL200/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h
index f6dd9fc2e8..d17fe88ce1 100644
--- a/config/examples/RapideLite/RL200/Configuration_adv.h
+++ b/config/examples/RapideLite/RL200/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h
index 62a91b1b50..c0503a8678 100644
--- a/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/config/examples/RepRapPro/Huxley/Configuration.h
@@ -2082,6 +2082,12 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h
index 1d84a57667..86c23d6c57 100644
--- a/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index 413bf07ff6..923f387943 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h
index c5b5a1b31e..82ad86f80c 100644
--- a/config/examples/RigidBot/Configuration_adv.h
+++ b/config/examples/RigidBot/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h
index cbd0e89301..61e2fb6805 100644
--- a/config/examples/SCARA/Configuration.h
+++ b/config/examples/SCARA/Configuration.h
@@ -2042,6 +2042,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/SCARA/Configuration_adv.h b/config/examples/SCARA/Configuration_adv.h
index f2836f0c46..a082fbb648 100644
--- a/config/examples/SCARA/Configuration_adv.h
+++ b/config/examples/SCARA/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
index 017a763e17..7b95013b3c 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
index 3feb4ed805..f8aea6c91c 100644
--- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
+++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h
index 1ea7b3636e..6474792c55 100644
--- a/config/examples/STM32/STM32F10/Configuration.h
+++ b/config/examples/STM32/STM32F10/Configuration.h
@@ -2035,6 +2035,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h
index b5171a41af..a693e550c3 100644
--- a/config/examples/STM32/STM32F4/Configuration.h
+++ b/config/examples/STM32/STM32F4/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 8a09ecc75d..16a5a74449 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -2035,6 +2035,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h
index bd7d65d97b..baff32d42b 100644
--- a/config/examples/Sanguinololu/Configuration.h
+++ b/config/examples/Sanguinololu/Configuration.h
@@ -2064,6 +2064,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h
index 64e4ab516f..1610b4f161 100644
--- a/config/examples/Sanguinololu/Configuration_adv.h
+++ b/config/examples/Sanguinololu/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h
index af248d4d02..f77da5f1d3 100644
--- a/config/examples/Tevo/Michelangelo/Configuration.h
+++ b/config/examples/Tevo/Michelangelo/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h
index 27e3f0d3c5..0ef33eec95 100644
--- a/config/examples/Tevo/Michelangelo/Configuration_adv.h
+++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h
index d8e3202264..2974afd685 100644
--- a/config/examples/Tevo/Tarantula Pro/Configuration.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration.h
@@ -2031,6 +2031,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
index fc151b21ba..6284d868b7 100755
--- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
+++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h
@@ -1139,6 +1139,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
index 1b6648a8f5..7c2cd20c7a 100644
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
index 02ee750f69..5df3b231b6 100755
--- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
+++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
index 73088c938f..b981ee8afd 100644
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
index 02ee750f69..5df3b231b6 100755
--- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
@@ -1142,6 +1142,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h
index 72e55c5f63..010ea9a1f8 100644
--- a/config/examples/TheBorg/Configuration.h
+++ b/config/examples/TheBorg/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h
index fd633d785c..1b7319f26c 100644
--- a/config/examples/TheBorg/Configuration_adv.h
+++ b/config/examples/TheBorg/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h
index 74d71e45f3..59abc9449b 100644
--- a/config/examples/TinyBoy2/Configuration.h
+++ b/config/examples/TinyBoy2/Configuration.h
@@ -2089,6 +2089,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h
index f18bd8758d..6f0365e804 100644
--- a/config/examples/TinyBoy2/Configuration_adv.h
+++ b/config/examples/TinyBoy2/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h
index 40f36f0b0b..f98aae5863 100644
--- a/config/examples/Tronxy/X1/Configuration.h
+++ b/config/examples/Tronxy/X1/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h
index 3bc50c851f..6152a4e903 100644
--- a/config/examples/Tronxy/X3A/Configuration.h
+++ b/config/examples/Tronxy/X3A/Configuration.h
@@ -2037,6 +2037,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h
index 2811cd83d9..20d8d44d54 100644
--- a/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h
index ac5465eed7..8bd88215ef 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration.h
@@ -2054,6 +2054,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
index 56ca3db093..3813e86519 100644
--- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h
+++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index 9727dae89d..ad9e4d2a0d 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index 113327327d..3baad0f980 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -2044,6 +2044,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h
index 0e1493bf66..23ab1ce032 100644
--- a/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/config/examples/UltiMachine/Archim1/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h
index b782d2e267..d290d64a4c 100644
--- a/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h
index babab7bd43..cb05e2d8bb 100644
--- a/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/config/examples/UltiMachine/Archim2/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 5d353bb3ef..67729df028 100644
--- a/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h
index 072932261a..0e93640d60 100644
--- a/config/examples/VORONDesign/Configuration.h
+++ b/config/examples/VORONDesign/Configuration.h
@@ -2042,6 +2042,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h
index a511a68bfe..ccf642e875 100644
--- a/config/examples/VORONDesign/Configuration_adv.h
+++ b/config/examples/VORONDesign/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h
index a67195e5e6..20473efc3d 100644
--- a/config/examples/Velleman/K8200/Configuration.h
+++ b/config/examples/Velleman/K8200/Configuration.h
@@ -2031,6 +2031,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h
index fa295fe2fd..aac3447d32 100644
--- a/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/config/examples/Velleman/K8200/Configuration_adv.h
@@ -1156,6 +1156,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h
index 2671f81e12..f8e5616f50 100644
--- a/config/examples/Velleman/K8400/Configuration.h
+++ b/config/examples/Velleman/K8400/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Velleman/K8400/Configuration_adv.h b/config/examples/Velleman/K8400/Configuration_adv.h
index 7e2a1afbf8..74c7fa6adc 100644
--- a/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/config/examples/Velleman/K8400/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index ee191b3284..375295124f 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h
index b4fffdcfd7..f92e2df3c4 100644
--- a/config/examples/WASP/PowerWASP/Configuration.h
+++ b/config/examples/WASP/PowerWASP/Configuration.h
@@ -2052,6 +2052,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h
index b1f2096a68..9dd4c715eb 100644
--- a/config/examples/WASP/PowerWASP/Configuration_adv.h
+++ b/config/examples/WASP/PowerWASP/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h
index 7de297840e..a606dc4461 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -2046,6 +2046,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index 5827ec64af..a2ce4bc2f5 100644
--- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
index f32ae7ae94..0cf5a39cbf 100755
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
index 136b3401d1..13f6606810 100644
--- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
+++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h
index e484c1ef49..989f3ef8ac 100644
--- a/config/examples/adafruit/ST7565/Configuration.h
+++ b/config/examples/adafruit/ST7565/Configuration.h
@@ -2033,6 +2033,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h
index 9bc4498480..e16e955d59 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -2221,6 +2221,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index c6a8cb5361..0abba0145a 100644
--- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration.h b/config/examples/delta/Dreammaker/Overlord/Configuration.h
index a60faac0de..825617c2e5 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration.h
@@ -2157,6 +2157,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
index 385e28a763..50529c2201 100644
--- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
index 6dc8940ba5..a6c09b86ce 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h
@@ -2168,6 +2168,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
index 385e28a763..50529c2201 100644
--- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
+++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 393ec7b1f1..60f81d01cc 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -2161,6 +2161,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index 9d1bb4bb2d..fb3938f3f8 100644
--- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h
index 39797c4656..4eba85b0e4 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -2160,6 +2160,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index 9d1bb4bb2d..fb3938f3f8 100644
--- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index 746e023381..f5f3f7cbbb 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -2160,6 +2160,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 077e3da4cc..a2d2fc8a2f 100644
--- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 2bf4f81e18..9108cd1bfe 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -2149,6 +2149,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 51245109d5..6b6a31dc36 100644
--- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 34cee53e2a..984cc0093c 100644
--- a/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -2163,6 +2163,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h
index 06ff5067b3..d6fa3ebc81 100644
--- a/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/config/examples/delta/MKS/SBASE/Configuration.h
@@ -2148,6 +2148,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 0cc3db7e4b..b181a154f4 100644
--- a/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h
index a4a887c77a..9416c873fb 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -2152,6 +2152,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index 7bb5af5d53..db527ca780 100644
--- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h
index 66866b36f2..23d2be1f87 100644
--- a/config/examples/delta/generic/Configuration.h
+++ b/config/examples/delta/generic/Configuration.h
@@ -2148,6 +2148,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h
index 077e3da4cc..a2d2fc8a2f 100644
--- a/config/examples/delta/generic/Configuration_adv.h
+++ b/config/examples/delta/generic/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h
index b4728dd712..60f200c2ca 100644
--- a/config/examples/delta/kossel_mini/Configuration.h
+++ b/config/examples/delta/kossel_mini/Configuration.h
@@ -2150,6 +2150,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h
index 077e3da4cc..a2d2fc8a2f 100644
--- a/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index f766c39d30..ee40890691 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -2151,6 +2151,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h
index 7038595fa3..607a96c558 100644
--- a/config/examples/delta/kossel_xl/Configuration.h
+++ b/config/examples/delta/kossel_xl/Configuration.h
@@ -2151,6 +2151,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h
index 053cc6da0c..c0a8ea5cd9 100644
--- a/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -1145,6 +1145,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h
index 36c57a0aac..8095c191a7 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -2047,6 +2047,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index 415d3dd521..9d25542152 100644
--- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index af94e2998d..b7844cd985 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -2036,6 +2036,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h
index d4fe552ef5..118d04e4f5 100644
--- a/config/examples/makibox/Configuration_adv.h
+++ b/config/examples/makibox/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h
index 3f31f05b08..6942f607a1 100644
--- a/config/examples/tvrrug/Round2/Configuration.h
+++ b/config/examples/tvrrug/Round2/Configuration.h
@@ -2028,6 +2028,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h
index c6d870990b..1a77813b89 100644
--- a/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -1143,6 +1143,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**
diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h
index e0fdb86b02..17e4ffe2b4 100644
--- a/config/examples/wt150/Configuration.h
+++ b/config/examples/wt150/Configuration.h
@@ -2038,6 +2038,12 @@
//
//#define MALYAN_LCD
+//
+// LulzBot Color Touch UI for FTDI EVE (FT800/FT810) displays
+// See Configuration_adv.h for all configuration options.
+//
+//#defined LULZBOT_TOUCH_UI
+
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extensible_ui'.
diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h
index 5a7338b67c..631e2d6503 100644
--- a/config/examples/wt150/Configuration_adv.h
+++ b/config/examples/wt150/Configuration_adv.h
@@ -1144,6 +1144,53 @@
#endif // HAS_GRAPHICAL_LCD
+//
+// Lulzbot Touch UI
+//
+#if ENABLED(LULZBOT_TOUCH_UI)
+ // Display board used
+ //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240)
+ //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272)
+ //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272)
+ //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
+ //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
+
+ // Correct the resolution if not using the stock TFT panel.
+ //#define TOUCH_UI_320x240
+ //#define TOUCH_UI_480x272
+ //#define TOUCH_UI_800x480
+
+ // Mappings for boards with a standard RepRapDiscount Display connector
+ //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping
+ //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping
+ //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping
+ //#define OTHER_PIN_LAYOUT // Define pins manually below
+ #if ENABLED(OTHER_PIN_LAYOUT)
+ // The pins for CS and MOD_RESET (PD) must be chosen.
+ #define CLCD_MOD_RESET 9
+ #define CLCD_SPI_CS 10
+
+ // If using software SPI, specify pins for SCLK, MOSI, MISO
+ //#define CLCD_USE_SOFT_SPI
+ #if ENABLED(CLCD_USE_SOFT_SPI)
+ #define CLCD_SOFT_SPI_MOSI 11
+ #define CLCD_SOFT_SPI_MISO 12
+ #define CLCD_SOFT_SPI_SCLK 13
+ #endif
+ #endif
+
+ // Display Orientation. An inverted (i.e. upside-down) display
+ // is supported on the FT800. The FT810 and beyond also support
+ // portrait and mirrored orientations.
+ //#define TOUCH_UI_INVERTED
+ //#define TOUCH_UI_PORTRAIT
+ //#define TOUCH_UI_MIRRORED
+
+ // Use a numeric passcode for "Screen lock" keypad.
+ // (recommended for smaller displays)
+ //#define TOUCH_UI_PASSCODE
+#endif
+
// @section safety
/**