zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Clean up Configuration_adv.h (#12900)

Browse source
This commit is contained in:
Ludy 2019-01-16 01:42:10 +01:00 committed by Scott Lahteine
parent 59b18aaeef
commit 294521439e
2 changed files with 3 additions and 32 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds #define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/** /**
* Whenever an M104, M109, or M303 increases the target temperature, the * Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@ -499,6 +501,7 @@
// Add runtime configuration and tuning of backlash values (M425) // Add runtime configuration and tuning of backlash values (M425)
//#define BACKLASH_GCODE //#define BACKLASH_GCODE
#if ENABLED(BACKLASH_GCODE) #if ENABLED(BACKLASH_GCODE)
// Measure the Z backlash when probing (G29) and set with "M425 Z" // Measure the Z backlash when probing (G29) and set with "M425 Z"
#define MEASURE_BACKLASH_WHEN_PROBING #define MEASURE_BACKLASH_WHEN_PROBING
@ -1477,22 +1480,6 @@
*/ */
//#define TMC_DEBUG //#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/** /**
* You can set your own advanced settings by filling in predefined functions. * You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page * A list of available functions can be found on the library github page

16
Marlin/src/config/examples/WASP/PowerWASP/Configuration_adv.h
View file

@ -1480,22 +1480,6 @@
*/ */
//#define TMC_DEBUG //#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/** /**
* You can set your own advanced settings by filling in predefined functions. * You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page * A list of available functions can be found on the library github page