MKS Gen L V2.1 (#19314)

This commit is contained in:
makerbase 2020-09-10 10:48:42 +08:00 committed by Scott Lahteine
parent e6cf959170
commit 2af9e2f759
4 changed files with 96 additions and 6 deletions

View file

@ -268,12 +268,14 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1148)
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
# MKS GEN L V2
else ifeq ($(HARDWARE_MOTHERBOARD),1150)
# Copymaster 3D
# MKS GEN L V2.1
else ifeq ($(HARDWARE_MOTHERBOARD),1151)
# Ortur 4
# Copymaster 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1152)
# Tenlog D3 Hero
# Ortur 4
else ifeq ($(HARDWARE_MOTHERBOARD),1153)
# Tenlog D3 Hero
else ifeq ($(HARDWARE_MOTHERBOARD),1154)
#
# RAMBo and derivatives

View file

@ -104,9 +104,10 @@
#define BOARD_HJC2560C_REV2 1148 // ADIMLab Gantry v2
#define BOARD_TANGO 1149 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1150 // MKS GEN L V2
#define BOARD_COPYMASTER_3D 1151 // Copymaster 3D
#define BOARD_ORTUR_4 1152 // Ortur 4
#define BOARD_TENLOG_D3_HERO 1153 // Tenlog D3 Hero IDEX printer
#define BOARD_MKS_GEN_L_V21 1151 // MKS GEN L V2.1
#define BOARD_COPYMASTER_3D 1152 // Copymaster 3D
#define BOARD_ORTUR_4 1153 // Ortur 4
#define BOARD_TENLOG_D3_HERO 1154 // Tenlog D3 Hero IDEX printer
//
// RAMBo and derivatives

View file

@ -196,6 +196,8 @@
#include "ramps/pins_ORTUR_4.h" // ATmega2560 env:mega2560
#elif MB(TENLOG_D3_HERO)
#include "ramps/pins_TENLOG_D3_HERO.h" // ATmega2560 env:mega2560
#elif MB(MKS_GEN_L_V21)
#include "ramps/pins_MKS_GEN_L_V21.h" // ATmega2560 env:mega2560
//
// RAMBo and derivatives

View file

@ -0,0 +1,85 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MKS GEN L V2 Arduino Mega2560 with RAMPS v1.4 pin assignments
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS GEN L V2.1 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "MKS GEN L V2.1"
//
// Heaters / Fans
//
// Power outputs EFBF or EFBE
#define MOSFET_D_PIN 7
//
// CS Pins wired to avoid conflict with the LCD
// See https://www.thingiverse.com/asset:66604
//
#ifndef X_CS_PIN
#define X_CS_PIN 63
#endif
#ifndef Y_CS_PIN
#define Y_CS_PIN 64
#endif
#ifndef Z_CS_PIN
#define Z_CS_PIN 65
#endif
#ifndef E0_CS_PIN
#define E0_CS_PIN 66
#endif
#ifndef E1_CS_PIN
#define E1_CS_PIN 12
#endif
// TMC2130 Diag Pins (currently just for reference)
#define X_DIAG_PIN 3
#define Y_DIAG_PIN 14
#define Z_DIAG_PIN 18
#define E0_DIAG_PIN 2
#define E1_DIAG_PIN 15
#ifndef SERVO1_PIN
#define SERVO1_PIN 21
#endif
#ifndef SERVO2_PIN
#define SERVO2_PIN 39
#endif
#ifndef SERVO3_PIN
#define SERVO3_PIN 32
#endif
#ifndef E1_SERIAL_TX_PIN
#define E1_SERIAL_TX_PIN 20
#endif
#ifndef E1_SERIAL_RX_PIN
#define E1_SERIAL_RX_PIN 12
#endif
#include "pins_RAMPS.h"