From 2c325c2a7d9b66b50d8585a1d5ced422ed88b1ae Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sat, 21 Mar 2020 21:13:19 -0500 Subject: [PATCH] Format some pins files --- Marlin/src/pins/esp32/pins_E4D.h | 56 +-- Marlin/src/pins/esp32/pins_ESP32.h | 56 +-- Marlin/src/pins/esp32/pins_MRR_ESPA.h | 68 +-- Marlin/src/pins/esp32/pins_MRR_ESPE.h | 122 ++--- Marlin/src/pins/linux/pins_RAMPS_LINUX.h | 454 ++++++++--------- Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h | 110 ++-- Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h | 90 ++-- Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h | 81 ++- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h | 137 +++-- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h | 242 ++++----- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h | 206 ++++---- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 44 +- Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h | 132 ++--- Marlin/src/pins/lpc1768/pins_MKS_SBASE.h | 234 ++++----- Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h | 242 ++++----- Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 316 ++++++------ Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h | 87 ++-- Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h | 91 ++-- Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h | 146 +++--- .../src/pins/lpc1769/pins_COHESION3D_MINI.h | 116 ++--- .../src/pins/lpc1769/pins_COHESION3D_REMIX.h | 196 ++++---- Marlin/src/pins/lpc1769/pins_MKS_SGEN.h | 20 +- Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h | 82 +-- Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h | 114 ++--- Marlin/src/pins/mega/pins_CHEAPTRONIC.h | 48 +- Marlin/src/pins/mega/pins_CHEAPTRONICv2.h | 112 ++--- Marlin/src/pins/mega/pins_CNCONTROLS_11.h | 132 ++--- Marlin/src/pins/mega/pins_CNCONTROLS_12.h | 138 ++--- Marlin/src/pins/mega/pins_CNCONTROLS_15.h | 78 +-- Marlin/src/pins/mega/pins_EINSTART-S.h | 68 +-- Marlin/src/pins/mega/pins_ELEFU_3.h | 104 ++-- Marlin/src/pins/mega/pins_GT2560_REV_A.h | 120 ++--- Marlin/src/pins/mega/pins_GT2560_V3.h | 114 ++--- Marlin/src/pins/mega/pins_GT2560_V3_A20.h | 14 +- Marlin/src/pins/mega/pins_GT2560_V3_MC2.h | 8 +- Marlin/src/pins/mega/pins_HJC2560C_REV2.h | 124 ++--- Marlin/src/pins/mega/pins_LEAPFROG.h | 66 +-- Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h | 72 +-- Marlin/src/pins/mega/pins_MEGACONTROLLER.h | 110 ++-- Marlin/src/pins/mega/pins_MEGATRONICS.h | 96 ++-- Marlin/src/pins/mega/pins_MEGATRONICS_2.h | 114 ++--- Marlin/src/pins/mega/pins_MEGATRONICS_3.h | 164 +++--- Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h | 204 ++++---- Marlin/src/pins/mega/pins_MINITRONICS.h | 108 ++-- Marlin/src/pins/mega/pins_OVERLORD.h | 100 ++-- Marlin/src/pins/mega/pins_PICA.h | 96 ++-- Marlin/src/pins/mega/pins_PICAOLD.h | 8 +- Marlin/src/pins/mega/pins_SILVER_GATE.h | 84 ++-- Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h | 70 +-- Marlin/src/pins/rambo/pins_EINSY_RAMBO.h | 124 ++--- Marlin/src/pins/rambo/pins_EINSY_RETRO.h | 142 +++--- Marlin/src/pins/rambo/pins_MINIRAMBO.h | 146 +++--- Marlin/src/pins/rambo/pins_RAMBO.h | 188 +++---- Marlin/src/pins/rambo/pins_SCOOVO_X9H.h | 140 +++--- Marlin/src/pins/ramps/pins_3DRAG.h | 56 +-- Marlin/src/pins/ramps/pins_AZTEEG_X3.h | 32 +- Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h | 94 ++-- Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h | 10 +- Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h | 47 +- .../src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h | 70 +-- Marlin/src/pins/ramps/pins_FELIX2.h | 10 +- Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h | 124 ++--- Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h | 28 +- .../src/pins/ramps/pins_FORMBOT_TREX2PLUS.h | 126 ++--- Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h | 132 +++-- Marlin/src/pins/ramps/pins_FYSETC_F6_13.h | 184 +++---- Marlin/src/pins/ramps/pins_FYSETC_F6_14.h | 26 +- Marlin/src/pins/ramps/pins_K8400.h | 10 +- Marlin/src/pins/ramps/pins_K8800.h | 80 +-- Marlin/src/pins/ramps/pins_MKS_BASE_14.h | 20 +- Marlin/src/pins/ramps/pins_MKS_BASE_16.h | 14 +- Marlin/src/pins/ramps/pins_MKS_BASE_common.h | 36 +- Marlin/src/pins/ramps/pins_MKS_GEN_13.h | 28 +- Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h | 32 +- Marlin/src/pins/ramps/pins_RAMPS.h | 476 +++++++++--------- Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h | 26 +- Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h | 10 +- Marlin/src/pins/ramps/pins_RAMPS_OLD.h | 74 +-- Marlin/src/pins/ramps/pins_RAMPS_PLUS.h | 22 +- Marlin/src/pins/ramps/pins_RIGIDBOARD.h | 60 +-- Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h | 12 +- Marlin/src/pins/ramps/pins_RL200.h | 18 +- Marlin/src/pins/ramps/pins_RUMBA.h | 158 +++--- Marlin/src/pins/ramps/pins_TANGO.h | 14 +- Marlin/src/pins/ramps/pins_TRIGORILLA_14.h | 62 +-- Marlin/src/pins/ramps/pins_TT_OSCAR.h | 436 ++++++++-------- Marlin/src/pins/ramps/pins_ULTIMAIN_2.h | 100 ++-- Marlin/src/pins/ramps/pins_ULTIMAKER.h | 122 ++--- Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h | 170 +++---- Marlin/src/pins/ramps/pins_VORON.h | 10 +- Marlin/src/pins/ramps/pins_ZRIB_V20.h | 46 +- Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h | 188 +++---- Marlin/src/pins/sam/pins_ADSK.h | 62 +-- Marlin/src/pins/sam/pins_ALLIGATOR_R2.h | 136 ++--- Marlin/src/pins/sam/pins_ARCHIM1.h | 158 +++--- Marlin/src/pins/sam/pins_ARCHIM2.h | 186 +++---- Marlin/src/pins/sam/pins_CNCONTROLS_15D.h | 92 ++-- Marlin/src/pins/sam/pins_DUE3DOM.h | 148 +++--- Marlin/src/pins/sam/pins_DUE3DOM_MINI.h | 152 +++--- Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h | 116 ++--- Marlin/src/pins/sam/pins_RADDS.h | 232 ++++----- Marlin/src/pins/sam/pins_RAMPS_DUO.h | 34 +- Marlin/src/pins/sam/pins_RAMPS_FD_V1.h | 164 +++--- Marlin/src/pins/sam/pins_RAMPS_SMART.h | 28 +- Marlin/src/pins/sam/pins_RURAMPS4D_11.h | 202 ++++---- Marlin/src/pins/sam/pins_RURAMPS4D_13.h | 190 +++---- Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h | 142 +++--- Marlin/src/pins/samd/pins_RAMPS_144.h | 218 ++++---- Marlin/src/pins/sanguino/pins_ANET_10.h | 84 ++-- .../src/pins/sanguino/pins_GEN3_MONOLITHIC.h | 38 +- Marlin/src/pins/sanguino/pins_GEN3_PLUS.h | 43 +- Marlin/src/pins/sanguino/pins_GEN6.h | 54 +- Marlin/src/pins/sanguino/pins_GEN7_12.h | 79 ++- Marlin/src/pins/sanguino/pins_GEN7_14.h | 56 +-- Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h | 76 +-- .../src/pins/sanguino/pins_MELZI_CREALITY.h | 14 +- Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h | 12 +- Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h | 20 +- Marlin/src/pins/sanguino/pins_OMCA.h | 70 +-- Marlin/src/pins/sanguino/pins_OMCA_A.h | 50 +- .../src/pins/sanguino/pins_SANGUINOLOLU_11.h | 190 +++---- Marlin/src/pins/sanguino/pins_SETHI.h | 56 +-- Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h | 126 ++--- .../src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h | 118 ++--- .../pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h | 18 +- .../src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h | 130 ++--- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 270 +++++----- Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h | 92 ++-- Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h | 76 +-- .../pins/stm32f1/pins_FYSETC_CHEETAH_V12.h | 18 +- Marlin/src/pins/stm32f1/pins_GTM32_MINI.h | 130 ++--- Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h | 130 ++--- Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h | 130 ++--- Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h | 136 ++--- .../src/pins/stm32f1/pins_JGAURORA_A5S_A1.h | 82 +-- Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h | 114 ++--- Marlin/src/pins/stm32f1/pins_MALYAN_M200.h | 46 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h | 124 ++--- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h | 94 ++-- .../src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h | 106 ++-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h | 90 ++-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h | 86 ++-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h | 198 ++++---- Marlin/src/pins/stm32f1/pins_MORPHEUS.h | 46 +- Marlin/src/pins/stm32f1/pins_STM32F1R.h | 222 ++++---- Marlin/src/pins/stm32f1/pins_STM3R_MINI.h | 244 ++++----- Marlin/src/pins/stm32f4/pins_ARMED.h | 188 +++---- Marlin/src/pins/stm32f4/pins_BEAST.h | 252 +++++----- .../src/pins/stm32f4/pins_BLACK_STM32F407VE.h | 128 ++--- .../src/pins/stm32f4/pins_BTT_BTT002_V1_0.h | 138 ++--- Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h | 314 ++++++------ .../src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h | 186 ++++--- Marlin/src/pins/stm32f4/pins_FLYF407ZG.h | 237 +++++---- Marlin/src/pins/stm32f4/pins_FYSETC_S6.h | 194 +++---- .../src/pins/stm32f4/pins_GENERIC_STM32F4.h | 121 +++-- Marlin/src/pins/stm32f4/pins_LERDGE_K.h | 112 ++--- Marlin/src/pins/stm32f4/pins_LERDGE_X.h | 108 ++-- Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h | 69 ++- Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h | 30 +- Marlin/src/pins/stm32f4/pins_RUMBA32_common.h | 126 ++--- .../src/pins/stm32f4/pins_STEVAL_3DP001V1.h | 210 ++++---- Marlin/src/pins/stm32f4/pins_VAKE403D.h | 146 +++--- Marlin/src/pins/stm32f7/pins_REMRAM_V1.h | 106 ++-- Marlin/src/pins/stm32f7/pins_THE_BORG.h | 168 +++---- Marlin/src/pins/teensy2/pins_5DPRINT.h | 68 +-- Marlin/src/pins/teensy2/pins_BRAINWAVE.h | 50 +- Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h | 50 +- Marlin/src/pins/teensy2/pins_PRINTRBOARD.h | 92 ++-- .../src/pins/teensy2/pins_PRINTRBOARD_REVF.h | 156 +++--- Marlin/src/pins/teensy2/pins_SAV_MKI.h | 108 ++-- Marlin/src/pins/teensy2/pins_TEENSY2.h | 72 +-- Marlin/src/pins/teensy2/pins_TEENSYLU.h | 73 ++- Marlin/src/pins/teensy3/pins_TEENSY31_32.h | 82 +-- Marlin/src/pins/teensy3/pins_TEENSY35_36.h | 94 ++-- 174 files changed, 9635 insertions(+), 9668 deletions(-) diff --git a/Marlin/src/pins/esp32/pins_E4D.h b/Marlin/src/pins/esp32/pins_E4D.h index 409f381297..829c391c4d 100644 --- a/Marlin/src/pins/esp32/pins_E4D.h +++ b/Marlin/src/pins/esp32/pins_E4D.h @@ -42,49 +42,49 @@ // // Limit Switches // -#define X_MIN_PIN 34 -#define Y_MIN_PIN 35 -#define Z_MIN_PIN 16 // 15 +#define X_MIN_PIN 34 +#define Y_MIN_PIN 35 +#define Z_MIN_PIN 16 // 15 // // Steppers // -#define X_STEP_PIN 12 // 34//27 -#define X_DIR_PIN 13 // 35//26 -#define X_ENABLE_PIN 17 // 0//17//25 // used free pin -//#define X_CS_PIN 0 +#define X_STEP_PIN 12 // 34//27 +#define X_DIR_PIN 13 // 35//26 +#define X_ENABLE_PIN 17 // 0//17//25 // used free pin +//#define X_CS_PIN 0 -#define Y_STEP_PIN 32 // 33 -#define Y_DIR_PIN 33 // 32 -#define Y_ENABLE_PIN X_ENABLE_PIN -//#define Y_CS_PIN 13 +#define Y_STEP_PIN 32 // 33 +#define Y_DIR_PIN 33 // 32 +#define Y_ENABLE_PIN X_ENABLE_PIN +//#define Y_CS_PIN 13 -#define Z_STEP_PIN 25 // 14 -#define Z_DIR_PIN 26 // 12 -#define Z_ENABLE_PIN X_ENABLE_PIN -//#define Z_CS_PIN 5 // SS_PIN +#define Z_STEP_PIN 25 // 14 +#define Z_DIR_PIN 26 // 12 +#define Z_ENABLE_PIN X_ENABLE_PIN +//#define Z_CS_PIN 5 // SS_PIN -#define E0_STEP_PIN 27 // 16 -#define E0_DIR_PIN 14 // 17 -#define E0_ENABLE_PIN X_ENABLE_PIN -//#define E0_CS_PIN 21 +#define E0_STEP_PIN 27 // 16 +#define E0_DIR_PIN 14 // 17 +#define E0_ENABLE_PIN X_ENABLE_PIN +//#define E0_CS_PIN 21 // // Temperature Sensors // -#define TEMP_0_PIN 36 // Analog Input -#define TEMP_BED_PIN 39 // Analog Input +#define TEMP_0_PIN 36 // Analog Input +#define TEMP_BED_PIN 39 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 // 4//2//(D8) -#define FAN_PIN 0 // 2//15//13 (D9) -#define HEATER_BED_PIN 15 // 15//0 //(D10) +#define HEATER_0_PIN 2 // 4//2//(D8) +#define FAN_PIN 0 // 2//15//13 (D9) +#define HEATER_BED_PIN 15 // 15//0 //(D10) // SPI -#define SDSS 5 +#define SDSS 5 #define I2S_STEPPER_STREAM -#define I2S_WS 23 -#define I2S_BCK 22 -#define I2S_DATA 21 +#define I2S_WS 23 +#define I2S_BCK 22 +#define I2S_DATA 21 diff --git a/Marlin/src/pins/esp32/pins_ESP32.h b/Marlin/src/pins/esp32/pins_ESP32.h index 99a5ea2f76..e4da400528 100644 --- a/Marlin/src/pins/esp32/pins_ESP32.h +++ b/Marlin/src/pins/esp32/pins_ESP32.h @@ -35,52 +35,52 @@ // I2S (steppers & other output-only pins) // #define I2S_STEPPER_STREAM -#define I2S_WS 25 -#define I2S_BCK 26 -#define I2S_DATA 27 +#define I2S_WS 25 +#define I2S_BCK 26 +#define I2S_DATA 27 // // Limit Switches // -#define X_MIN_PIN 34 -#define Y_MIN_PIN 35 -#define Z_MIN_PIN 15 +#define X_MIN_PIN 34 +#define Y_MIN_PIN 35 +#define Z_MIN_PIN 15 // // Steppers // -#define X_STEP_PIN 128 -#define X_DIR_PIN 129 -#define X_ENABLE_PIN 130 -//#define X_CS_PIN 0 +#define X_STEP_PIN 128 +#define X_DIR_PIN 129 +#define X_ENABLE_PIN 130 +//#define X_CS_PIN 0 -#define Y_STEP_PIN 131 -#define Y_DIR_PIN 132 -#define Y_ENABLE_PIN 133 -//#define Y_CS_PIN 13 +#define Y_STEP_PIN 131 +#define Y_DIR_PIN 132 +#define Y_ENABLE_PIN 133 +//#define Y_CS_PIN 13 -#define Z_STEP_PIN 134 -#define Z_DIR_PIN 135 -#define Z_ENABLE_PIN 136 -//#define Z_CS_PIN 5 // SS_PIN +#define Z_STEP_PIN 134 +#define Z_DIR_PIN 135 +#define Z_ENABLE_PIN 136 +//#define Z_CS_PIN 5 // SS_PIN -#define E0_STEP_PIN 137 -#define E0_DIR_PIN 138 -#define E0_ENABLE_PIN 139 -//#define E0_CS_PIN 21 +#define E0_STEP_PIN 137 +#define E0_DIR_PIN 138 +#define E0_ENABLE_PIN 139 +//#define E0_CS_PIN 21 // // Temperature Sensors // -#define TEMP_0_PIN 36 // Analog Input -#define TEMP_BED_PIN 39 // Analog Input +#define TEMP_0_PIN 36 // Analog Input +#define TEMP_BED_PIN 39 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define FAN_PIN 13 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define FAN_PIN 13 +#define HEATER_BED_PIN 4 // SPI -#define SDSS 5 +#define SDSS 5 diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPA.h b/Marlin/src/pins/esp32/pins_MRR_ESPA.h index a93f0f05c4..8a06f9a169 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPA.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPA.h @@ -45,66 +45,66 @@ #ifdef I2S_STEPPER_STREAM #undef I2S_STEPPER_STREAM #endif -#define I2S_WS -1 -#define I2S_BCK -1 -#define I2S_DATA -1 +#define I2S_WS -1 +#define I2S_BCK -1 +#define I2S_DATA -1 // // Limit Switches // -#define X_STOP_PIN 34 -#define Y_STOP_PIN 35 -#define Z_STOP_PIN 15 +#define X_STOP_PIN 34 +#define Y_STOP_PIN 35 +#define Z_STOP_PIN 15 // // Steppers // -#define X_STEP_PIN 27 -#define X_DIR_PIN 26 -#define X_ENABLE_PIN 25 -//#define X_CS_PIN 21 +#define X_STEP_PIN 27 +#define X_DIR_PIN 26 +#define X_ENABLE_PIN 25 +//#define X_CS_PIN 21 -#define Y_STEP_PIN 33 -#define Y_DIR_PIN 32 -#define Y_ENABLE_PIN X_ENABLE_PIN -//#define Y_CS_PIN 22 +#define Y_STEP_PIN 33 +#define Y_DIR_PIN 32 +#define Y_ENABLE_PIN X_ENABLE_PIN +//#define Y_CS_PIN 22 -#define Z_STEP_PIN 14 -#define Z_DIR_PIN 12 -#define Z_ENABLE_PIN X_ENABLE_PIN -//#define Z_CS_PIN 5 // SS_PIN +#define Z_STEP_PIN 14 +#define Z_DIR_PIN 12 +#define Z_ENABLE_PIN X_ENABLE_PIN +//#define Z_CS_PIN 5 // SS_PIN -#define E0_STEP_PIN 16 -#define E0_DIR_PIN 17 -#define E0_ENABLE_PIN X_ENABLE_PIN -//#define E0_CS_PIN 21 +#define E0_STEP_PIN 16 +#define E0_DIR_PIN 17 +#define E0_ENABLE_PIN X_ENABLE_PIN +//#define E0_CS_PIN 21 // // Temperature Sensors // -#define TEMP_0_PIN 36 // Analog Input -#define TEMP_BED_PIN 39 // Analog Input +#define TEMP_0_PIN 36 // Analog Input +#define TEMP_BED_PIN 39 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define FAN_PIN 13 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define FAN_PIN 13 +#define HEATER_BED_PIN 4 // // MicroSD card // -#define MOSI_PIN 23 -#define MISO_PIN 19 -#define SCK_PIN 18 -#define SDSS 5 -#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers +#define MOSI_PIN 23 +#define MISO_PIN 19 +#define SCK_PIN 18 +#define SDSS 5 +#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers // Hardware serial pins // Add the following to Configuration.h or Configuration_adv.h to assign // specific pins to hardware Serial1. // Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but // MRR ESPA does not have enough spare pins for such reassignment. -//#define HARDWARE_SERIAL1_RX 21 -//#define HARDWARE_SERIAL1_TX 22 +//#define HARDWARE_SERIAL1_RX 21 +//#define HARDWARE_SERIAL1_TX 22 diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index 0096027158..3dd50489df 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -43,9 +43,9 @@ // // Limit Switches // -#define X_STOP_PIN 35 -#define Y_STOP_PIN 32 -#define Z_STOP_PIN 33 +#define X_STOP_PIN 35 +#define Y_STOP_PIN 32 +#define Z_STOP_PIN 33 // // Enable I2S stepper stream @@ -53,72 +53,72 @@ #undef I2S_STEPPER_STREAM #define I2S_STEPPER_STREAM -#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance +#undef LIN_ADVANCE // Currently, I2S stream does not work with linear advance -#define I2S_WS 26 -#define I2S_BCK 25 -#define I2S_DATA 27 +#define I2S_WS 26 +#define I2S_BCK 25 +#define I2S_DATA 27 // // Steppers // -#define X_STEP_PIN 129 -#define X_DIR_PIN 130 -#define X_ENABLE_PIN 128 -//#define X_CS_PIN 21 +#define X_STEP_PIN 129 +#define X_DIR_PIN 130 +#define X_ENABLE_PIN 128 +//#define X_CS_PIN 21 -#define Y_STEP_PIN 132 -#define Y_DIR_PIN 133 -#define Y_ENABLE_PIN 131 -//#define Y_CS_PIN 22 +#define Y_STEP_PIN 132 +#define Y_DIR_PIN 133 +#define Y_ENABLE_PIN 131 +//#define Y_CS_PIN 22 -#define Z_STEP_PIN 135 -#define Z_DIR_PIN 136 -#define Z_ENABLE_PIN 134 -//#define Z_CS_PIN 5 // SS_PIN +#define Z_STEP_PIN 135 +#define Z_DIR_PIN 136 +#define Z_ENABLE_PIN 134 +//#define Z_CS_PIN 5 // SS_PIN -#define E0_STEP_PIN 138 -#define E0_DIR_PIN 139 -#define E0_ENABLE_PIN 137 -//#define E0_CS_PIN 21 +#define E0_STEP_PIN 138 +#define E0_DIR_PIN 139 +#define E0_ENABLE_PIN 137 +//#define E0_CS_PIN 21 -#define E1_STEP_PIN 141 -#define E1_DIR_PIN 142 -#define E1_ENABLE_PIN 140 -//#define E1_CS_PIN 22 +#define E1_STEP_PIN 141 +#define E1_DIR_PIN 142 +#define E1_ENABLE_PIN 140 +//#define E1_CS_PIN 22 -#define Z2_STEP_PIN 141 -#define Z2_DIR_PIN 142 -#define Z2_ENABLE_PIN 140 -//#define Z2_CS_PIN 5 +#define Z2_STEP_PIN 141 +#define Z2_DIR_PIN 142 +#define Z2_ENABLE_PIN 140 +//#define Z2_CS_PIN 5 // // Temperature Sensors // -#define TEMP_0_PIN 36 // Analog Input -#define TEMP_1_PIN 34 // Analog Input -#define TEMP_BED_PIN 39 // Analog Input +#define TEMP_0_PIN 36 // Analog Input +#define TEMP_1_PIN 34 // Analog Input +#define TEMP_BED_PIN 39 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 145 // 2 -#define FAN_PIN 146 // 15 -#define HEATER_BED_PIN 144 // 4 +#define HEATER_0_PIN 145 // 2 +#define FAN_PIN 146 // 15 +#define HEATER_BED_PIN 144 // 4 -#define CONTROLLER_FAN_PIN 147 -//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder -//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder -#define FAN1_PIN 149 +#define CONTROLLER_FAN_PIN 147 +//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder +//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder +#define FAN1_PIN 149 // // MicroSD card // -#define MOSI_PIN 23 -#define MISO_PIN 19 -#define SCK_PIN 18 -#define SDSS 5 -#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers +#define MOSI_PIN 23 +#define MISO_PIN 19 +#define SCK_PIN 18 +#define SDSS 5 +#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers ////////////////////////// // LCDs and Controllers // @@ -126,21 +126,21 @@ #if HAS_GRAPHICAL_LCD - #define LCD_PINS_RS 13 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 16 + #define LCD_PINS_RS 13 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 #if ENABLED(CR10_STOCKDISPLAY) - #define BEEPER_PIN 151 + #define BEEPER_PIN 151 #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define BEEPER_PIN 151 + #define BEEPER_PIN 151 - //#define LCD_PINS_D5 150 - //#define LCD_PINS_D6 152 - //#define LCD_PINS_D7 153 + //#define LCD_PINS_D5 150 + //#define LCD_PINS_D6 152 + //#define LCD_PINS_D7 153 #else @@ -148,9 +148,9 @@ #endif - #define BTN_EN1 0 - #define BTN_EN2 12 - #define BTN_ENC 14 + #define BTN_EN1 0 + #define BTN_EN2 12 + #define BTN_ENC 14 #endif // HAS_GRAPHICAL_LCD @@ -159,7 +159,7 @@ // specific pins to hardware Serial1 and Serial2. // Note: Serial2 can be defined using HARDWARE_SERIAL2_RX and HARDWARE_SERIAL2_TX but // MRR ESPA does not have enough spare pins for such reassignment. -//#define HARDWARE_SERIAL1_RX 21 -//#define HARDWARE_SERIAL1_TX 22 -//#define HARDWARE_SERIAL2_RX 2 -//#define HARDWARE_SERIAL2_TX 4 +//#define HARDWARE_SERIAL1_RX 21 +//#define HARDWARE_SERIAL1_TX 22 +//#define HARDWARE_SERIAL2_RX 2 +//#define HARDWARE_SERIAL2_TX 4 diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index b1f7ecee38..0bfbaabdcd 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -49,7 +49,7 @@ #define BOARD_INFO_NAME "RAMPS 1.4" #endif -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB #define IS_RAMPS_EFB @@ -57,85 +57,85 @@ // Servos // #ifdef IS_RAMPS_13 - #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI + #define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI #else - #define SERVO0_PIN 11 + #define SERVO0_PIN 11 #endif -#define SERVO1_PIN 6 -#define SERVO2_PIN 5 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 #ifndef SERVO3_PIN - #define SERVO3_PIN 4 + #define SERVO3_PIN 4 #endif // // Limit Switches // -#define X_MIN_PIN 3 +#define X_MIN_PIN 3 #ifndef X_MAX_PIN - #define X_MAX_PIN 2 + #define X_MAX_PIN 2 #endif -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 53 + #define X_CS_PIN 53 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 49 + #define Y_CS_PIN 49 #endif -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN - #define Z_CS_PIN 40 + #define Z_CS_PIN 40 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 42 + #define E0_CS_PIN 42 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN 44 + #define E1_CS_PIN 44 #endif // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // @@ -159,72 +159,72 @@ // Heaters / Fans // #ifndef MOSFET_D_PIN - #define MOSFET_D_PIN -1 + #define MOSFET_D_PIN -1 #endif #ifndef RAMPS_D8_PIN - #define RAMPS_D8_PIN 8 + #define RAMPS_D8_PIN 8 #endif #ifndef RAMPS_D9_PIN - #define RAMPS_D9_PIN 9 + #define RAMPS_D9_PIN 9 #endif #ifndef RAMPS_D10_PIN - #define RAMPS_D10_PIN 10 + #define RAMPS_D10_PIN 10 #endif -#define HEATER_0_PIN RAMPS_D10_PIN +#define HEATER_0_PIN RAMPS_D10_PIN -#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed - #define FAN_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan - #define HEATER_1_PIN RAMPS_D9_PIN - #define FAN_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed - #define HEATER_1_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan - #define FAN_PIN RAMPS_D9_PIN - #define FAN1_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan - #define FAN_PIN RAMPS_D8_PIN -#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define FAN_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN + #define FAN_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN_PIN RAMPS_D9_PIN + #define FAN1_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan + #define FAN_PIN RAMPS_D8_PIN +#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN #if HOTENDS == 1 - #define FAN1_PIN MOSFET_D_PIN + #define FAN1_PIN MOSFET_D_PIN #else - #define HEATER_1_PIN MOSFET_D_PIN + #define HEATER_1_PIN MOSFET_D_PIN #endif #endif #ifndef FAN_PIN - #define FAN_PIN 4 // IO pin. Buffer needed + #define FAN_PIN 4 // IO pin. Buffer needed #endif // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 +#define SDSS 53 +#define LED_PIN 13 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 5 // Analog Input on AUX2 + #define FILWIDTH_PIN 5 // Analog Input on AUX2 #endif // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 4 + #define FIL_RUNOUT_PIN 4 #endif #ifndef PS_ON_PIN - #define PS_ON_PIN 12 + #define PS_ON_PIN 12 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) - #if NUM_SERVOS <= 1 // Prefer the servo connector - #define CASE_LIGHT_PIN 6 // Hardware PWM - #elif HAS_FREE_AUX2_PINS // try to use AUX 2 - #define CASE_LIGHT_PIN 44 // Hardware PWM + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif HAS_FREE_AUX2_PINS // try to use AUX 2 + #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif @@ -232,14 +232,14 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) - #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector - #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM - #define SPINDLE_DIR_PIN 5 - #elif HAS_FREE_AUX2_PINS // try to use AUX 2 - #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM - #define SPINDLE_DIR_PIN 65 + #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif HAS_FREE_AUX2_PINS // try to use AUX 2 + #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 #endif #endif @@ -247,13 +247,13 @@ // Průša i3 MK2 Multiplexer Support // #ifndef E_MUX0_PIN - #define E_MUX0_PIN 40 // Z_CS_PIN + #define E_MUX0_PIN 40 // Z_CS_PIN #endif #ifndef E_MUX1_PIN - #define E_MUX1_PIN 42 // E0_CS_PIN + #define E_MUX1_PIN 42 // E0_CS_PIN #endif #ifndef E_MUX2_PIN - #define E_MUX2_PIN 44 // E1_CS_PIN + #define E_MUX2_PIN 44 // E1_CS_PIN #endif /** @@ -261,13 +261,13 @@ */ #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI 66 + #define TMC_SW_MOSI 66 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO 44 + #define TMC_SW_MISO 44 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK 64 + #define TMC_SW_SCK 64 #endif #endif @@ -295,91 +295,91 @@ */ #ifndef X_SERIAL_TX_PIN - #define X_SERIAL_TX_PIN 40 + #define X_SERIAL_TX_PIN 40 #endif #ifndef X_SERIAL_RX_PIN - #define X_SERIAL_RX_PIN 63 + #define X_SERIAL_RX_PIN 63 #endif #ifndef X2_SERIAL_TX_PIN - #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN - #define X2_SERIAL_RX_PIN -1 + #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN - #define Y_SERIAL_TX_PIN 59 + #define Y_SERIAL_TX_PIN 59 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN 64 + #define Y_SERIAL_RX_PIN 64 #endif #ifndef Y2_SERIAL_TX_PIN - #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN - #define Y2_SERIAL_RX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN - #define Z_SERIAL_TX_PIN 42 + #define Z_SERIAL_TX_PIN 42 #endif #ifndef Z_SERIAL_RX_PIN - #define Z_SERIAL_RX_PIN 65 + #define Z_SERIAL_RX_PIN 65 #endif #ifndef Z2_SERIAL_TX_PIN - #define Z2_SERIAL_TX_PIN -1 + #define Z2_SERIAL_TX_PIN -1 #endif #ifndef Z2_SERIAL_RX_PIN - #define Z2_SERIAL_RX_PIN -1 + #define Z2_SERIAL_RX_PIN -1 #endif #ifndef E0_SERIAL_TX_PIN - #define E0_SERIAL_TX_PIN 44 + #define E0_SERIAL_TX_PIN 44 #endif #ifndef E0_SERIAL_RX_PIN - #define E0_SERIAL_RX_PIN 66 + #define E0_SERIAL_RX_PIN 66 #endif #ifndef E1_SERIAL_TX_PIN - #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN - #define E1_SERIAL_RX_PIN -1 + #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN - #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN - #define E2_SERIAL_RX_PIN -1 + #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN - #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN - #define E3_SERIAL_RX_PIN -1 + #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN - #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN - #define E4_SERIAL_RX_PIN -1 + #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN - #define E5_SERIAL_TX_PIN -1 + #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN - #define E5_SERIAL_RX_PIN -1 + #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN - #define E6_SERIAL_TX_PIN -1 + #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN - #define E6_SERIAL_RX_PIN -1 + #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN - #define E7_SERIAL_TX_PIN -1 + #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN - #define E7_SERIAL_RX_PIN -1 + #define E7_SERIAL_RX_PIN -1 #endif #endif @@ -394,62 +394,62 @@ // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS 40 - #define LCD_PINS_ENABLE 42 - #define LCD_PINS_D4 65 - #define LCD_PINS_D5 66 - #define LCD_PINS_D6 44 - #define LCD_PINS_D7 64 + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 #else #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 25 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #endif #elif ENABLED(ZONESTAR_LCD) - #define LCD_PINS_RS 64 - #define LCD_PINS_ENABLE 44 - #define LCD_PINS_D4 63 - #define LCD_PINS_D5 40 - #define LCD_PINS_D6 42 - #define LCD_PINS_D7 65 + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) - #define LCD_PINS_DC 25 // Set as output on init - #define LCD_PINS_RS 27 // Pull low for 1s to init + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init // DOGM SPI LCD Support - #define DOGLCD_CS 16 - #define DOGLCD_MOSI 17 - #define DOGLCD_SCK 23 - #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #define DOGLCD_A0 LCD_PINS_DC #else - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 #endif - #define LCD_PINS_D7 29 + #define LCD_PINS_D7 29 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #endif #endif @@ -457,10 +457,10 @@ #if DISABLED(NEWPANEL) // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -472,85 +472,85 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #if ENABLED(CR10_STOCKDISPLAY) - #define BTN_EN1 17 - #define BTN_EN2 23 + #define BTN_EN1 17 + #define BTN_EN2 23 #else - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 31 + #define BTN_EN2 33 #endif - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS SDSS - #define KILL_PIN 41 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS SDSS + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 + #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_ENC -1 - #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define DOGLCD_CS 45 - #define DOGLCD_A0 44 + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 #define LCD_SCREEN_ROT_180 - #define BEEPER_PIN 33 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define KILL_PIN 31 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 - #define BEEPER_PIN 23 - #define LCD_BACKLIGHT_PIN 33 + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 - #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #elif ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 27 - #define DOGLCD_CS 25 + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 // GLCD features // Uncomment screen orientation @@ -558,25 +558,25 @@ //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 // not connected to a pin - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 64 + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // not connected to a pin - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 // GLCD features // Uncomment screen orientation @@ -584,16 +584,16 @@ //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 - #define SD_DETECT_PIN 49 - #define KILL_PIN 64 + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 #elif ENABLED(ZONESTAR_LCD) - #define ADC_KEYPAD_PIN 12 + #define ADC_KEYPAD_PIN 12 #elif ENABLED(AZSMZ_12864) @@ -602,29 +602,29 @@ #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #endif #endif diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h index ef064694ab..1417fb7d99 100644 --- a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h +++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h @@ -40,84 +40,84 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_24 -#define Y_MIN_PIN P1_26 -#define Z_MIN_PIN P1_28 -#define Z_MAX_PIN P1_29 +#define X_MIN_PIN P1_24 +#define Y_MIN_PIN P1_26 +#define Z_MIN_PIN P1_28 +#define Z_MAX_PIN P1_29 // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 // A0 (TH1) -#define TEMP_BED_PIN P0_24_A1 // A1 (TH2) -#define TEMP_1_PIN P0_25_A2 // A2 (TH3) +#define TEMP_0_PIN P0_23_A0 // A0 (TH1) +#define TEMP_BED_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) // // Heaters / Fans // // EFB -#define HEATER_0_PIN P2_04 -#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_04 +#define HEATER_BED_PIN P2_05 #ifndef FAN_PIN - #define FAN_PIN P2_07 + #define FAN_PIN P2_07 #endif -#define FAN1_PIN P0_26 +#define FAN1_PIN P0_26 -#define LCD_SDSS P0_16 // LCD SD chip select -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define LCD_SDSS P0_16 // LCD SD chip select +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if ENABLED(AZSMZ_12864) - #define BEEPER_PIN P1_30 - #define DOGLCD_A0 P2_06 - #define DOGLCD_CS P1_22 - #define BTN_EN1 P4_28 - #define BTN_EN2 P1_27 - #define BTN_ENC P3_26 + #define BEEPER_PIN P1_30 + #define DOGLCD_A0 P2_06 + #define DOGLCD_CS P1_22 + #define BTN_EN1 P4_28 + #define BTN_EN2 P1_27 + #define BTN_ENC P3_26 #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif #endif #if SD_CONNECTION_IS(LCD) - #define SCK_PIN P0_15 - #define MISO_PIN P0_17 - #define MOSI_PIN P0_18 - #define SS_PIN LCD_SDSS - #define SD_DETECT_PIN P3_25 + #define SCK_PIN P0_15 + #define MISO_PIN P0_17 + #define MOSI_PIN P0_18 + #define SS_PIN LCD_SDSS + #define SD_DETECT_PIN P3_25 #elif SD_CONNECTION_IS(ONBOARD) - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif @@ -125,16 +125,16 @@ // // Ethernet pins // -#define ENET_MDIO P1_17 -#define ENET_RX_ER P1_14 -#define ENET_RXD1 P1_10 -#define ENET_MOC P1_16 -#define REF_CLK P1_15 -#define ENET_RXD0 P1_09 -#define ENET_CRS P1_08 -#define ENET_TX_EN P1_04 -#define ENET_TXD0 P1_00 -#define ENET_TXD1 P1_01 +#define ENET_MDIO P1_17 +#define ENET_RX_ER P1_14 +#define ENET_RXD1 P1_10 +#define ENET_MOC P1_16 +#define REF_CLK P1_15 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 /** * PWMs diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index a4800dcc73..d710138b95 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -47,42 +47,42 @@ // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 #ifndef X_CS_PIN - #define X_CS_PIN P1_15 // ETH + #define X_CS_PIN P1_15 // ETH #endif -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 #ifndef Y_CS_PIN - #define Y_CS_PIN P1_14 // ETH + #define Y_CS_PIN P1_14 // ETH #endif -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 #ifndef Z_CS_PIN - #define Z_CS_PIN P1_16 // ETH + #define Z_CS_PIN P1_16 // ETH #endif -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 #ifndef E0_CS_PIN - #define E0_CS_PIN P1_17 // ETH + #define E0_CS_PIN P1_17 // ETH #endif // @@ -90,13 +90,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P0_18 // ETH + #define TMC_SW_MOSI P0_18 // ETH #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P0_17 // ETH + #define TMC_SW_MISO P0_17 // ETH #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P0_15 // ETH + #define TMC_SW_SCK P0_15 // ETH #endif #endif @@ -104,23 +104,23 @@ // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_24_A1 // A0 (T0) -#define TEMP_BED_PIN P0_23_A0 // A1 (T1) +#define TEMP_0_PIN P0_24_A1 // A0 (T0) +#define TEMP_BED_PIN P0_23_A0 // A1 (T1) // // Heaters / Fans // -#define HEATER_0_PIN P2_07 -#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 #ifndef FAN_PIN - #define FAN_PIN P2_04 + #define FAN_PIN P2_04 #endif // // Unused // -//#define PIN_P2_10 P2_10 // IBOOT-1 -//#define PIN_P0_27 P0_27 // Onboard SD Detect +//#define PIN_P2_10 P2_10 // IBOOT-1 +//#define PIN_P0_27 P0_27 // Onboard SD Detect /** * LCD / Controller @@ -134,16 +134,16 @@ */ #if HAS_SPI_LCD - #define BEEPER_PIN P1_31 // EXP1-1 + #define BEEPER_PIN P1_31 // EXP1-1 - #define BTN_EN1 P3_26 // EXP2-3 - #define BTN_EN2 P3_25 // EXP2-5 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-3 + #define BTN_EN2 P3_25 // EXP2-5 + #define BTN_ENC P1_30 // EXP1-2 - #define SD_DETECT_PIN P0_27 // EXP2-7 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 - #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 + #define SD_DETECT_PIN P0_27 // EXP2-7 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 + #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0" @@ -162,11 +162,11 @@ * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board. */ #if ENABLED(SDSUPPORT) - #define SCK_PIN P0_15 // EXP1-5 - #define MISO_PIN P0_16 // EXP1-4 - #define MOSI_PIN P0_18 // EXP1-3 - #define SS_PIN P1_30 // EXP1-2 - #define SDSS SS_PIN + #define SCK_PIN P0_15 // EXP1-5 + #define MISO_PIN P0_16 // EXP1-4 + #define MOSI_PIN P0_18 // EXP1-3 + #define SS_PIN P1_30 // EXP1-2 + #define SDSS SS_PIN #endif /** diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index 549b44019a..041235d493 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -45,56 +45,53 @@ // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series - +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series // // Steppers // -#define X_STEP_PIN P2_0 -#define X_DIR_PIN P0_5 -#define X_ENABLE_PIN P0_4 +#define X_STEP_PIN P2_0 +#define X_DIR_PIN P0_5 +#define X_ENABLE_PIN P0_4 -#define Y_STEP_PIN P2_1 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_1 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_2 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 - -#define E0_STEP_PIN P2_3 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define Z_STEP_PIN P2_2 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#define E0_STEP_PIN P2_3 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 // A0 (T0) -#define TEMP_BED_PIN P0_24_A1 // A1 (T1) - +#define TEMP_0_PIN P0_23_A0 // A0 (T0) +#define TEMP_BED_PIN P0_24_A1 // A1 (T1) // // Heaters / Fans // -#define HEATER_0_PIN P2_7 -#define HEATER_BED_PIN P2_5 +#define HEATER_0_PIN P2_7 +#define HEATER_BED_PIN P2_5 #ifndef FAN_PIN - #define FAN_PIN P2_4 + #define FAN_PIN P2_4 #endif // // Unused // -//#define PIN_P2_10 P2_10 // IBOOT-1 -//#define PIN_P0_27 P0_27 // Onboard SD Detect +//#define PIN_P2_10 P2_10 // IBOOT-1 +//#define PIN_P0_27 P0_27 // Onboard SD Detect /** * LCD / Controller @@ -108,16 +105,16 @@ */ #if HAS_SPI_LCD - #define BEEPER_PIN P1_31 // EXP1-1 + #define BEEPER_PIN P1_31 // EXP1-1 - #define BTN_EN1 P3_26 // EXP2-3 - #define BTN_EN2 P3_25 // EXP2-5 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-3 + #define BTN_EN2 P3_25 // EXP2-5 + #define BTN_ENC P1_30 // EXP1-2 - #define SD_DETECT_PIN P0_27 // EXP2-7 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 - #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 + #define SD_DETECT_PIN P0_27 // EXP2-7 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 + #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" @@ -129,7 +126,6 @@ #endif // HAS_SPI_LCD - /** * SD Card Reader * @@ -138,15 +134,14 @@ */ #if ENABLED(SDSUPPORT) - #define SCK_PIN P0_15 // EXP1-5 - #define MISO_PIN P0_16 // EXP1-4 - #define MOSI_PIN P0_18 // EXP1-3 - #define SS_PIN P1_30 // EXP1-2 - #define SDSS SS_PIN + #define SCK_PIN P0_15 // EXP1-5 + #define MISO_PIN P0_16 // EXP1-4 + #define MOSI_PIN P0_18 // EXP1-3 + #define SS_PIN P1_30 // EXP1-2 + #define SDSS SS_PIN #endif // SDSUPPORT - /** * PWMS * diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h index feadafa592..4dae2dc5d6 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h @@ -33,31 +33,31 @@ // Limit Switches // -#define X_MIN_PIN P1_29 -#define X_MAX_PIN P1_28 -#define Y_MIN_PIN P1_27 -#define Y_MAX_PIN P1_26 -#define Z_MIN_PIN P1_25 -#define Z_MAX_PIN P1_24 +#define X_MIN_PIN P1_29 +#define X_MAX_PIN P1_28 +#define Y_MIN_PIN P1_27 +#define Y_MAX_PIN P1_26 +#define Z_MIN_PIN P1_25 +#define Z_MAX_PIN P1_24 // // Steppers // -#define X_STEP_PIN P0_04 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P4_28 +#define X_STEP_PIN P0_04 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P4_28 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P2_02 -#define Y_ENABLE_PIN P2_00 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P2_02 +#define Y_ENABLE_PIN P2_00 -#define Z_STEP_PIN P0_20 -#define Z_DIR_PIN P0_21 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P0_20 +#define Z_DIR_PIN P0_21 +#define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P0_11 -#define E0_DIR_PIN P2_13 -#define E0_ENABLE_PIN P2_12 +#define E0_STEP_PIN P0_11 +#define E0_DIR_PIN P2_13 +#define E0_ENABLE_PIN P2_12 /** * LCD / Controller @@ -73,19 +73,19 @@ */ #if HAS_SPI_LCD - #define BTN_EN1 P3_26 - #define BTN_EN2 P3_25 - #define BTN_ENC P2_11 + #define BTN_EN1 P3_26 + #define BTN_EN2 P3_25 + #define BTN_ENC P2_11 - #define SD_DETECT_PIN P1_31 - #define LCD_SDSS P1_23 - #define LCD_PINS_RS P0_16 - #define LCD_PINS_ENABLE P0_18 - #define LCD_PINS_D4 P0_15 + #define SD_DETECT_PIN P1_31 + #define LCD_SDSS P1_23 + #define LCD_PINS_RS P0_16 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS P2_06 - #define DOGLCD_A0 P0_16 + #define DOGLCD_CS P2_06 + #define DOGLCD_A0 P0_16 #endif #endif @@ -97,14 +97,14 @@ // https://www.facebook.com/groups/505736576548648/permalink/630639874058317/ #ifndef SDCARD_CONNECTION #if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #else - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif #endif #if SD_CONNECTION_IS(LCD) - #define SS_PIN P1_23 + #define SS_PIN P1_23 #endif // Trinamic driver support @@ -137,49 +137,48 @@ // When using any TMC SPI-based drivers, software SPI is used // because pins may be shared with the display or SD card. #define TMC_USE_SW_SPI - #define TMC_SW_MOSI P0_18 - #define TMC_SW_MISO P0_17 + #define TMC_SW_MOSI P0_18 + #define TMC_SW_MISO P0_17 // To minimize pin usage use the same clock pin as the display/SD card reader. (May generate LCD noise.) - #define TMC_SW_SCK P0_15 + #define TMC_SW_SCK P0_15 // If pin 2_06 is unused, it can be used for the clock to avoid the LCD noise. - //#define TMC_SW_SCK P2_06 + //#define TMC_SW_SCK P2_06 #if ENABLED(SOFTWARE_DRIVER_ENABLE) // Software enable allows the enable pins to be repurposed as chip-select pins. // Note: Requires the driver modules to be modified to always be enabled with the enable pin removed. #if AXIS_DRIVER_TYPE_X(TMC2130) - #define X_CS_PIN P4_28 - #undef X_ENABLE_PIN - #define X_ENABLE_PIN -1 + #define X_CS_PIN P4_28 + #undef X_ENABLE_PIN + #define X_ENABLE_PIN -1 #endif #if AXIS_DRIVER_TYPE_Y(TMC2130) - #define Y_CS_PIN P2_00 - #undef Y_ENABLE_PIN - #define Y_ENABLE_PIN -1 + #define Y_CS_PIN P2_00 + #undef Y_ENABLE_PIN + #define Y_ENABLE_PIN -1 #endif #if AXIS_DRIVER_TYPE_Z(TMC2130) - #define Z_CS_PIN P0_19 - #undef Z_ENABLE_PIN - #define Z_ENABLE_PIN -1 + #define Z_CS_PIN P0_19 + #undef Z_ENABLE_PIN + #define Z_ENABLE_PIN -1 #endif #if AXIS_DRIVER_TYPE_E0(TMC2130) - #define E0_CS_PIN P2_12 - #undef E0_ENABLE_PIN - #define E0_ENABLE_PIN -1 + #define E0_CS_PIN P2_12 + #undef E0_ENABLE_PIN + #define E0_ENABLE_PIN -1 #endif - #if AXIS_DRIVER_TYPE_E1(TMC2130) - #define E1_CS_PIN P0_10 - #undef E1_ENABLE_PIN - #define E1_ENABLE_PIN -1 + #define E1_CS_PIN P0_10 + #undef E1_ENABLE_PIN + #define E1_ENABLE_PIN -1 #endif - #else // !SOFTWARE_DRIVER_ENABLE + #else // !SOFTWARE_DRIVER_ENABLE // A chip-select pin is needed for each driver. @@ -192,11 +191,11 @@ #if SD_CONNECTION_IS(LCD) #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_PINS_FOR_CS." #endif - #define X_CS_PIN P1_23 - #define Y_CS_PIN P3_26 - #define Z_CS_PIN P2_11 - #define E0_CS_PIN P3_25 - #define E1_CS_PIN P1_31 + #define X_CS_PIN P1_23 + #define Y_CS_PIN P3_26 + #define Z_CS_PIN P2_11 + #define E0_CS_PIN P3_25 + #define E1_CS_PIN P1_31 #endif // Example 2: A REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER @@ -207,16 +206,16 @@ #if SD_CONNECTION_IS(LCD) #error "SDCARD_CONNECTION must not be 'LCD' with SKR_USE_LCD_SD_CARD_PINS_FOR_CS." #endif - #define X_CS_PIN P0_02 - #define Y_CS_PIN P0_03 - #define Z_CS_PIN P2_06 + #define X_CS_PIN P0_02 + #define Y_CS_PIN P0_03 + #define Z_CS_PIN P2_06 // We use SD_DETECT_PIN for E0 #undef SD_DETECT_PIN - #define E0_CS_PIN P1_31 + #define E0_CS_PIN P1_31 // We use LCD_SDSS pin for E1 - #undef LCD_SDSS - #define LCD_SDSS -1 - #define E1_CS_PIN P1_23 + #undef LCD_SDSS + #define LCD_SDSS -1 + #define E1_CS_PIN P1_23 #endif // Example 3: Use the driver enable pins for chip-select. @@ -224,11 +223,11 @@ // advanced features (like driver monitoring) will not be available. //#define SKR_USE_ENABLE_CS #if ENABLED(SKR_USE_ENABLE_FOR_CS) - #define X_CS_PIN X_ENABLE_PIN - #define Y_CS_PIN Y_ENABLE_PIN - #define Z_CS_PIN Z_ENABLE_PIN - #define E0_CS_PIN E0_ENABLE_PIN - #define E1_CS_PIN E1_ENABLE_PIN + #define X_CS_PIN X_ENABLE_PIN + #define Y_CS_PIN Y_ENABLE_PIN + #define Z_CS_PIN Z_ENABLE_PIN + #define E0_CS_PIN E0_ENABLE_PIN + #define E1_CS_PIN E1_ENABLE_PIN #endif #endif // SOFTWARE_DRIVER_ENABLE diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index adf726f024..1d1ad60f24 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -32,107 +32,107 @@ /** * Trinamic Stallguard pins */ -#define X_DIAG_PIN P1_29 // X- -#define Y_DIAG_PIN P1_27 // Y- -#define Z_DIAG_PIN P1_25 // Z- -#define E0_DIAG_PIN P1_28 // X+ -#define E1_DIAG_PIN P1_26 // Y+ +#define X_DIAG_PIN P1_29 // X- +#define Y_DIAG_PIN P1_27 // Y- +#define Z_DIAG_PIN P1_25 // Z- +#define E0_DIAG_PIN P1_28 // X+ +#define E1_DIAG_PIN P1_26 // Y+ /** * Limit Switches */ #if X_STALL_SENSITIVITY - #define X_STOP_PIN X_DIAG_PIN + #define X_STOP_PIN X_DIAG_PIN #if X_HOME_DIR < 0 - #define X_MAX_PIN P1_28 // X+ + #define X_MAX_PIN P1_28 // X+ #else - #define X_MIN_PIN P1_28 // X+ + #define X_MIN_PIN P1_28 // X+ #endif #else - #define X_MIN_PIN P1_29 // X- - #define X_MAX_PIN P1_28 // X+ + #define X_MIN_PIN P1_29 // X- + #define X_MAX_PIN P1_28 // X+ #endif #if Y_STALL_SENSITIVITY - #define Y_STOP_PIN Y_DIAG_PIN + #define Y_STOP_PIN Y_DIAG_PIN #if Y_HOME_DIR < 0 - #define Y_MAX_PIN P1_26 // Y+ + #define Y_MAX_PIN P1_26 // Y+ #else - #define Y_MIN_PIN P1_26 // Y+ + #define Y_MIN_PIN P1_26 // Y+ #endif #else - #define Y_MIN_PIN P1_27 // Y- - #define Y_MAX_PIN P1_26 // Y+ + #define Y_MIN_PIN P1_27 // Y- + #define Y_MAX_PIN P1_26 // Y+ #endif #if Z_STALL_SENSITIVITY - #define Z_STOP_PIN Z_DIAG_PIN + #define Z_STOP_PIN Z_DIAG_PIN #if Z_HOME_DIR < 0 - #define Z_MAX_PIN P1_24 // Z+ + #define Z_MAX_PIN P1_24 // Z+ #else - #define Z_MIN_PIN P1_24 // Z+ + #define Z_MIN_PIN P1_24 // Z+ #endif #else - #define Z_MIN_PIN P1_25 // Z- - #define Z_MAX_PIN P1_24 // Z+ + #define Z_MIN_PIN P1_25 // Z- + #define Z_MAX_PIN P1_24 // Z+ #endif -#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups +#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups // // Servos // #ifndef SERVO0_PIN - #define SERVO0_PIN P2_00 + #define SERVO0_PIN P2_00 #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN P1_24 + #define Z_MIN_PROBE_PIN P1_24 #endif // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN P1_28 + #define FIL_RUNOUT_PIN P1_28 #endif // // Steppers // -#define X_STEP_PIN P2_02 -#define X_DIR_PIN P2_06 -#define X_ENABLE_PIN P2_01 +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_06 +#define X_ENABLE_PIN P2_01 #ifndef X_CS_PIN - #define X_CS_PIN P1_17 + #define X_CS_PIN P1_17 #endif -#define Y_STEP_PIN P0_19 -#define Y_DIR_PIN P0_20 -#define Y_ENABLE_PIN P2_08 +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 #ifndef Y_CS_PIN - #define Y_CS_PIN P1_15 + #define Y_CS_PIN P1_15 #endif -#define Z_STEP_PIN P0_22 -#define Z_DIR_PIN P2_11 -#define Z_ENABLE_PIN P0_21 +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 #ifndef Z_CS_PIN - #define Z_CS_PIN P1_10 + #define Z_CS_PIN P1_10 #endif -#define E0_STEP_PIN P2_13 -#define E0_DIR_PIN P0_11 -#define E0_ENABLE_PIN P2_12 +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 #ifndef E0_CS_PIN - #define E0_CS_PIN P1_08 + #define E0_CS_PIN P1_08 #endif #ifndef E1_CS_PIN - #define E1_CS_PIN P1_01 + #define E1_CS_PIN P1_01 #endif // @@ -140,13 +140,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P4_28 + #define TMC_SW_MOSI P4_28 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P0_05 + #define TMC_SW_MISO P0_05 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P0_04 + #define TMC_SW_SCK P0_04 #endif #endif @@ -172,20 +172,20 @@ // // Software serial // - #define X_SERIAL_TX_PIN P4_29 - #define X_SERIAL_RX_PIN P1_17 + #define X_SERIAL_TX_PIN P4_29 + #define X_SERIAL_RX_PIN P1_17 - #define Y_SERIAL_TX_PIN P1_16 - #define Y_SERIAL_RX_PIN P1_15 + #define Y_SERIAL_TX_PIN P1_16 + #define Y_SERIAL_RX_PIN P1_15 - #define Z_SERIAL_TX_PIN P1_14 - #define Z_SERIAL_RX_PIN P1_10 + #define Z_SERIAL_TX_PIN P1_14 + #define Z_SERIAL_RX_PIN P1_10 - #define E0_SERIAL_TX_PIN P1_09 - #define E0_SERIAL_RX_PIN P1_08 + #define E0_SERIAL_TX_PIN P1_09 + #define E0_SERIAL_RX_PIN P1_08 - #define E1_SERIAL_TX_PIN P1_04 - #define E1_SERIAL_RX_PIN P1_01 + #define E1_SERIAL_TX_PIN P1_04 + #define E1_SERIAL_RX_PIN P1_01 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -202,23 +202,23 @@ * EXP2 EXP1 */ -#define EXPA1_03_PIN P1_23 -#define EXPA1_04_PIN P1_22 -#define EXPA1_05_PIN P1_21 -#define EXPA1_06_PIN P1_20 -#define EXPA1_07_PIN P1_19 -#define EXPA1_08_PIN P1_18 -#define EXPA1_09_PIN P0_28 -#define EXPA1_10_PIN P1_30 +#define EXPA1_03_PIN P1_23 +#define EXPA1_04_PIN P1_22 +#define EXPA1_05_PIN P1_21 +#define EXPA1_06_PIN P1_20 +#define EXPA1_07_PIN P1_19 +#define EXPA1_08_PIN P1_18 +#define EXPA1_09_PIN P0_28 +#define EXPA1_10_PIN P1_30 -#define EXPA2_03_PIN -1 -#define EXPA2_04_PIN P1_31 -#define EXPA2_05_PIN P0_18 -#define EXPA2_06_PIN P3_25 -#define EXPA2_07_PIN P0_16 -#define EXPA2_08_PIN P3_26 -#define EXPA2_09_PIN P0_15 -#define EXPA2_10_PIN P0_17 +#define EXPA2_03_PIN -1 +#define EXPA2_04_PIN P1_31 +#define EXPA2_05_PIN P0_18 +#define EXPA2_06_PIN P3_25 +#define EXPA2_07_PIN P0_16 +#define EXPA2_08_PIN P3_26 +#define EXPA2_09_PIN P0_15 +#define EXPA2_10_PIN P0_17 #if HAS_SPI_LCD @@ -247,75 +247,75 @@ * LCD LCD */ - #define LCD_PINS_RS EXPA1_03_PIN + #define LCD_PINS_RS EXPA1_03_PIN - #define BTN_EN1 EXPA1_06_PIN - #define BTN_EN2 EXPA1_04_PIN - #define BTN_ENC EXPA1_08_PIN + #define BTN_EN1 EXPA1_06_PIN + #define BTN_EN2 EXPA1_04_PIN + #define BTN_ENC EXPA1_08_PIN - #define LCD_PINS_ENABLE EXPA1_05_PIN - #define LCD_PINS_D4 EXPA1_07_PIN + #define LCD_PINS_ENABLE EXPA1_05_PIN + #define LCD_PINS_D4 EXPA1_07_PIN #elif ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS EXPA1_04_PIN + #define LCD_PINS_RS EXPA1_04_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN // (58) open-drain - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN - #else // !CR10_STOCKDISPLAY + #else // !CR10_STOCKDISPLAY - #define LCD_PINS_RS EXPA1_07_PIN + #define LCD_PINS_RS EXPA1_07_PIN - #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 - #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 - #define BTN_ENC EXPA1_09_PIN // (58) open-drain + #define BTN_EN1 EXPA2_08_PIN // (31) J3-2 & AUX-4 + #define BTN_EN2 EXPA2_06_PIN // (33) J3-4 & AUX-4 + #define BTN_ENC EXPA1_09_PIN // (58) open-drain - #define LCD_PINS_ENABLE EXPA1_08_PIN - #define LCD_PINS_D4 EXPA1_06_PIN + #define LCD_PINS_ENABLE EXPA1_08_PIN + #define LCD_PINS_D4 EXPA1_06_PIN - #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 - #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) + #define LCD_SDSS EXPA2_07_PIN // (16) J3-7 & AUX-4 + #define SD_DETECT_PIN EXPA2_04_PIN // (49) (NOT 5V tolerant) #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS EXPA1_08_PIN - #define DOGLCD_A0 EXPA1_07_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXPA1_08_PIN + #define DOGLCD_A0 EXPA1_07_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 - #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN EXPA1_06_PIN // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN EXPA1_05_PIN + #define RGB_LED_R_PIN EXPA1_05_PIN #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN EXPA1_04_PIN + #define RGB_LED_G_PIN EXPA1_04_PIN #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN EXPA1_03_PIN + #define RGB_LED_B_PIN EXPA1_03_PIN #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN EXPA1_05_PIN + #define NEOPIXEL_PIN EXPA1_05_PIN #endif - #else // !FYSETC_MINI_12864 + #else // !FYSETC_MINI_12864 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS EXPA1_05_PIN - #define DOGLCD_A0 EXPA1_04_PIN - #define DOGLCD_SCK EXPA2_09_PIN - #define DOGLCD_MOSI EXPA2_05_PIN + #define DOGLCD_CS EXPA1_05_PIN + #define DOGLCD_A0 EXPA1_04_PIN + #define DOGLCD_SCK EXPA2_09_PIN + #define DOGLCD_MOSI EXPA2_05_PIN #elif ENABLED(ENDER2_STOCKDISPLAY) @@ -331,21 +331,21 @@ * EXP1 */ - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN + #define DOGLCD_CS EXPA1_04_PIN + #define DOGLCD_A0 EXPA1_05_PIN + #define DOGLCD_SCK EXPA1_10_PIN + #define DOGLCD_MOSI EXPA1_03_PIN #define FORCE_SOFT_SPI - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 #endif #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 EXPA1_05_PIN - #define LCD_PINS_D6 EXPA1_04_PIN - #define LCD_PINS_D7 EXPA1_03_PIN + #define LCD_PINS_D5 EXPA1_05_PIN + #define LCD_PINS_D6 EXPA1_04_PIN + #define LCD_PINS_D7 EXPA1_03_PIN #endif #endif // !FYSETC_MINI_12864 @@ -359,11 +359,11 @@ // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif #if SD_CONNECTION_IS(LCD) - #define SS_PIN EXPA2_07_PIN + #define SS_PIN EXPA2_07_PIN #endif /** diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index 00c66521e6..7e722ea45f 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -37,58 +37,58 @@ // SD Connection // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif // // Servos // -#define SERVO0_PIN P2_00 +#define SERVO0_PIN P2_00 // // TMC StallGuard DIAG pins // -#define X_DIAG_PIN P1_29 // X-STOP -#define Y_DIAG_PIN P1_28 // Y-STOP -#define Z_DIAG_PIN P1_27 // Z-STOP -#define E0_DIAG_PIN P1_26 // E0DET -#define E1_DIAG_PIN P1_25 // E1DET +#define X_DIAG_PIN P1_29 // X-STOP +#define Y_DIAG_PIN P1_28 // Y-STOP +#define Z_DIAG_PIN P1_27 // Z-STOP +#define E0_DIAG_PIN P1_26 // E0DET +#define E1_DIAG_PIN P1_25 // E1DET // // Limit Switches // #if X_STALL_SENSITIVITY - #define X_STOP_PIN X_DIAG_PIN + #define X_STOP_PIN X_DIAG_PIN #if X_HOME_DIR < 0 - #define X_MAX_PIN P1_26 // E0DET + #define X_MAX_PIN P1_26 // E0DET #else - #define X_MIN_PIN P1_26 // E0DET + #define X_MIN_PIN P1_26 // E0DET #endif #else - #define X_STOP_PIN P1_29 // X-STOP + #define X_STOP_PIN P1_29 // X-STOP #endif #if Y_STALL_SENSITIVITY - #define Y_STOP_PIN Y_DIAG_PIN + #define Y_STOP_PIN Y_DIAG_PIN #if Y_HOME_DIR < 0 - #define Y_MAX_PIN P1_25 // E1DET + #define Y_MAX_PIN P1_25 // E1DET #else - #define Y_MIN_PIN P1_25 // E1DET + #define Y_MIN_PIN P1_25 // E1DET #endif #else - #define Y_STOP_PIN P1_28 // Y-STOP + #define Y_STOP_PIN P1_28 // Y-STOP #endif #if Z_STALL_SENSITIVITY - #define Z_STOP_PIN Z_DIAG_PIN + #define Z_STOP_PIN Z_DIAG_PIN #if Z_HOME_DIR < 0 - #define Z_MAX_PIN P1_00 // PWRDET + #define Z_MAX_PIN P1_00 // PWRDET #else - #define Z_MIN_PIN P1_00 // PWRDET + #define Z_MIN_PIN P1_00 // PWRDET #endif #else #ifndef Z_STOP_PIN - #define Z_STOP_PIN P1_27 // Z-STOP + #define Z_STOP_PIN P1_27 // Z-STOP #endif #endif @@ -96,82 +96,82 @@ // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN P0_10 + #define Z_MIN_PROBE_PIN P0_10 #endif // // Filament Runout Sensor // -#define FIL_RUNOUT_PIN P1_26 // E0DET -#define FIL_RUNOUT2_PIN P1_25 // E1DET +#define FIL_RUNOUT_PIN P1_26 // E0DET +#define FIL_RUNOUT2_PIN P1_25 // E1DET // // Power Supply Control // #ifndef PS_ON_PIN - #define PS_ON_PIN P1_00 // PWRDET + #define PS_ON_PIN P1_00 // PWRDET #endif // // Power Loss Detection // #ifndef POWER_LOSS_PIN - #define POWER_LOSS_PIN P1_00 // PWRDET + #define POWER_LOSS_PIN P1_00 // PWRDET #endif // // Steppers // -#define X_STEP_PIN P2_02 -#define X_DIR_PIN P2_06 -#define X_ENABLE_PIN P2_01 +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_06 +#define X_ENABLE_PIN P2_01 #ifndef X_CS_PIN - #define X_CS_PIN P1_10 + #define X_CS_PIN P1_10 #endif -#define Y_STEP_PIN P0_19 -#define Y_DIR_PIN P0_20 -#define Y_ENABLE_PIN P2_08 +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 #ifndef Y_CS_PIN - #define Y_CS_PIN P1_09 + #define Y_CS_PIN P1_09 #endif -#define Z_STEP_PIN P0_22 -#define Z_DIR_PIN P2_11 -#define Z_ENABLE_PIN P0_21 +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 #ifndef Z_CS_PIN - #define Z_CS_PIN P1_08 + #define Z_CS_PIN P1_08 #endif -#define E0_STEP_PIN P2_13 -#define E0_DIR_PIN P0_11 -#define E0_ENABLE_PIN P2_12 +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 #ifndef E0_CS_PIN - #define E0_CS_PIN P1_04 + #define E0_CS_PIN P1_04 #endif -#define E1_STEP_PIN P1_15 -#define E1_DIR_PIN P1_14 -#define E1_ENABLE_PIN P1_16 +#define E1_STEP_PIN P1_15 +#define E1_DIR_PIN P1_14 +#define E1_ENABLE_PIN P1_16 #ifndef E1_CS_PIN - #define E1_CS_PIN P1_01 + #define E1_CS_PIN P1_01 #endif -#define TEMP_1_PIN P0_23_A0 // A2 (T2) - (69) - TEMP_1_PIN -#define TEMP_BED_PIN P0_25_A2 // A0 (T0) - (67) - TEMP_BED_PIN +#define TEMP_1_PIN P0_23_A0 // A2 (T2) - (69) - TEMP_1_PIN +#define TEMP_BED_PIN P0_25_A2 // A0 (T0) - (67) - TEMP_BED_PIN // // Software SPI pins for TMC2130 stepper drivers // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P1_17 + #define TMC_SW_MOSI P1_17 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P0_05 + #define TMC_SW_MISO P0_05 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P0_04 + #define TMC_SW_SCK P0_04 #endif #endif @@ -197,23 +197,23 @@ // // Software serial // - #define X_SERIAL_TX_PIN P1_10 - #define X_SERIAL_RX_PIN P1_10 + #define X_SERIAL_TX_PIN P1_10 + #define X_SERIAL_RX_PIN P1_10 - #define Y_SERIAL_TX_PIN P1_09 - #define Y_SERIAL_RX_PIN P1_09 + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_09 - #define Z_SERIAL_TX_PIN P1_08 - #define Z_SERIAL_RX_PIN P1_08 + #define Z_SERIAL_TX_PIN P1_08 + #define Z_SERIAL_RX_PIN P1_08 - #define E0_SERIAL_TX_PIN P1_04 - #define E0_SERIAL_RX_PIN P1_04 + #define E0_SERIAL_TX_PIN P1_04 + #define E0_SERIAL_RX_PIN P1_04 - #define E1_SERIAL_TX_PIN P1_01 - #define E1_SERIAL_RX_PIN P1_01 + #define E1_SERIAL_TX_PIN P1_01 + #define E1_SERIAL_RX_PIN P1_01 - #define Z2_SERIAL_TX_PIN P1_01 - #define Z2_SERIAL_RX_PIN P1_01 + #define Z2_SERIAL_TX_PIN P1_01 + #define Z2_SERIAL_RX_PIN P1_01 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -223,7 +223,7 @@ // SD Connection // #if SD_CONNECTION_IS(LCD) - #define SS_PIN P0_16 + #define SS_PIN P0_16 #endif /** @@ -239,82 +239,82 @@ #if HAS_SPI_LCD #if ENABLED(ANET_FULL_GRAPHICS_LCD) - #define LCD_PINS_RS P1_23 + #define LCD_PINS_RS P1_23 - #define BTN_EN1 P1_20 - #define BTN_EN2 P1_22 - #define BTN_ENC P1_18 + #define BTN_EN1 P1_20 + #define BTN_EN2 P1_22 + #define BTN_ENC P1_18 - #define LCD_PINS_ENABLE P1_21 - #define LCD_PINS_D4 P1_19 + #define LCD_PINS_ENABLE P1_21 + #define LCD_PINS_D4 P1_19 #elif ENABLED(CR10_STOCKDISPLAY) - #define BTN_ENC P0_28 // (58) open-drain - #define LCD_PINS_RS P1_22 + #define BTN_ENC P0_28 // (58) open-drain + #define LCD_PINS_RS P1_22 - #define BTN_EN1 P1_18 - #define BTN_EN2 P1_20 + #define BTN_EN1 P1_18 + #define BTN_EN2 P1_20 - #define LCD_PINS_ENABLE P1_23 - #define LCD_PINS_D4 P1_21 + #define LCD_PINS_ENABLE P1_23 + #define LCD_PINS_D4 P1_21 #else - #define BTN_ENC P0_28 // (58) open-drain - #define LCD_PINS_RS P1_19 + #define BTN_ENC P0_28 // (58) open-drain + #define LCD_PINS_RS P1_19 - #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 - #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 - #define LCD_PINS_ENABLE P1_18 - #define LCD_PINS_D4 P1_20 + #define LCD_PINS_ENABLE P1_18 + #define LCD_PINS_D4 P1_20 - #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 #if SD_CONNECTION_IS(LCD) - #define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant) + #define SD_DETECT_PIN P1_31 // (49) (NOT 5V tolerant) #endif #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS P1_18 - #define DOGLCD_A0 P1_19 - #define DOGLCD_SCK P0_15 - #define DOGLCD_MOSI P0_18 + #define DOGLCD_CS P1_18 + #define DOGLCD_A0 P1_19 + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 - #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN P1_20 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN P1_21 + #define RGB_LED_R_PIN P1_21 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN P1_22 + #define RGB_LED_G_PIN P1_22 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN P1_23 + #define RGB_LED_B_PIN P1_23 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN P1_21 + #define NEOPIXEL_PIN P1_21 #endif - #else // !FYSETC_MINI_12864 + #else // !FYSETC_MINI_12864 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS P1_21 - #define DOGLCD_A0 P1_22 - #define DOGLCD_SCK P0_15 - #define DOGLCD_MOSI P0_18 + #define DOGLCD_CS P1_21 + #define DOGLCD_A0 P1_22 + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 #define FORCE_SOFT_SPI #endif #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 P1_21 - #define LCD_PINS_D6 P1_22 - #define LCD_PINS_D7 P1_23 + #define LCD_PINS_D5 P1_21 + #define LCD_PINS_D6 P1_22 + #define LCD_PINS_D7 P1_23 #endif #endif // !FYSETC_MINI_12864 @@ -327,7 +327,7 @@ // Neopixel LED // #ifndef NEOPIXEL_PIN - #define NEOPIXEL_PIN P1_24 + #define NEOPIXEL_PIN P1_24 #endif /** diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 2844fb3cda..63e160d8a0 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -40,13 +40,13 @@ // Steppers // #ifndef E1_STEP_PIN - #define E1_STEP_PIN P0_01 + #define E1_STEP_PIN P0_01 #endif #ifndef E1_DIR_PIN - #define E1_DIR_PIN P0_00 + #define E1_DIR_PIN P0_00 #endif #ifndef E1_ENABLE_PIN - #define E1_ENABLE_PIN P0_10 + #define E1_ENABLE_PIN P0_10 #endif // @@ -54,64 +54,64 @@ // 3.3V max when defined as an analog input // #ifndef TEMP_0_PIN - #define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN + #define TEMP_0_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_0_PIN #endif #ifndef TEMP_1_PIN - #define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN + #define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN #endif #ifndef TEMP_BED_PIN - #define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN + #define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN #endif #if HOTENDS == 1 && TEMP_SENSOR_PROBE - #define TEMP_PROBE_PIN TEMP_1_PIN + #define TEMP_PROBE_PIN TEMP_1_PIN #endif // // Heaters / Fans // #ifndef HEATER_0_PIN - #define HEATER_0_PIN P2_07 + #define HEATER_0_PIN P2_07 #endif #if HOTENDS == 1 #ifndef FAN1_PIN - #define FAN1_PIN P2_04 + #define FAN1_PIN P2_04 #endif #else #ifndef HEATER_1_PIN - #define HEATER_1_PIN P2_04 + #define HEATER_1_PIN P2_04 #endif #endif #ifndef FAN_PIN - #define FAN_PIN P2_03 + #define FAN_PIN P2_03 #endif #ifndef HEATER_BED_PIN - #define HEATER_BED_PIN P2_05 + #define HEATER_BED_PIN P2_05 #endif // // LCD / Controller // #if HAS_SPI_LCD - #define BEEPER_PIN P1_30 // (37) not 5V tolerant + #define BEEPER_PIN P1_30 // (37) not 5V tolerant #endif // // SD Support // -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) - #define SCK_PIN P0_15 - #define MISO_PIN P0_17 - #define MOSI_PIN P0_18 + #define SCK_PIN P0_15 + #define MISO_PIN P0_17 + #define MOSI_PIN P0_18 #elif SD_CONNECTION_IS(ONBOARD) #undef SD_DETECT_PIN - #define SD_DETECT_PIN P0_27 - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SD_DETECT_PIN P0_27 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h index 5ebf6ecba1..32de7bb740 100644 --- a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -44,63 +44,63 @@ // // Servos // -#define SERVO0_PIN P1_26 // PWM1[6] -#define SERVO1_PIN P1_18 // PWM1[1] +#define SERVO0_PIN P1_26 // PWM1[6] +#define SERVO1_PIN P1_18 // PWM1[1] // // Limit Switches // -#define X_MIN_PIN P0_00 -#define X_MAX_PIN P0_01 -#define Y_MIN_PIN P0_10 -#define Y_MAX_PIN P0_21 -#define Z_MIN_PIN P2_13 -#define Z_MAX_PIN P2_22 +#define X_MIN_PIN P0_00 +#define X_MAX_PIN P0_01 +#define Y_MIN_PIN P0_10 +#define Y_MAX_PIN P0_21 +#define Z_MIN_PIN P2_13 +#define Z_MAX_PIN P2_22 // // Steppers // -#define X_STEP_PIN P1_01 -#define X_DIR_PIN P1_04 -#define X_ENABLE_PIN P0_26 +#define X_STEP_PIN P1_01 +#define X_DIR_PIN P1_04 +#define X_ENABLE_PIN P0_26 -#define Y_STEP_PIN P1_10 -#define Y_DIR_PIN P1_14 -#define Y_ENABLE_PIN P1_08 +#define Y_STEP_PIN P1_10 +#define Y_DIR_PIN P1_14 +#define Y_ENABLE_PIN P1_08 -#define Z_STEP_PIN P1_17 -#define Z_DIR_PIN P4_29 -#define Z_ENABLE_PIN P1_15 +#define Z_STEP_PIN P1_17 +#define Z_DIR_PIN P4_29 +#define Z_ENABLE_PIN P1_15 -#define E0_STEP_PIN P0_05 -#define E0_DIR_PIN P2_00 -#define E0_ENABLE_PIN P4_28 +#define E0_STEP_PIN P0_05 +#define E0_DIR_PIN P2_00 +#define E0_ENABLE_PIN P4_28 -#define E1_STEP_PIN P2_03 -#define E1_DIR_PIN P2_04 -#define E1_ENABLE_PIN P2_01 +#define E1_STEP_PIN P2_03 +#define E1_DIR_PIN P2_04 +#define E1_ENABLE_PIN P2_01 -#define E2_STEP_PIN P2_07 -#define E2_DIR_PIN P2_08 -#define E2_ENABLE_PIN P2_05 +#define E2_STEP_PIN P2_07 +#define E2_DIR_PIN P2_08 +#define E2_ENABLE_PIN P2_05 // // TMC2208 UART pins // #if HAS_TMC_UART - #define X_SERIAL_TX_PIN P1_00 - #define X_SERIAL_RX_PIN P1_00 - #define Y_SERIAL_TX_PIN P1_09 - #define Y_SERIAL_RX_PIN P1_09 - #define Z_SERIAL_TX_PIN P1_16 - #define Z_SERIAL_RX_PIN P1_16 - #define E0_SERIAL_TX_PIN P0_04 - #define E0_SERIAL_RX_PIN P0_04 - #define E1_SERIAL_TX_PIN P2_02 - #define E1_SERIAL_RX_PIN P2_02 - #define E2_SERIAL_TX_PIN P2_06 - #define E2_SERIAL_RX_PIN P2_06 + #define X_SERIAL_TX_PIN P1_00 + #define X_SERIAL_RX_PIN P1_00 + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_09 + #define Z_SERIAL_TX_PIN P1_16 + #define Z_SERIAL_RX_PIN P1_16 + #define E0_SERIAL_TX_PIN P0_04 + #define E0_SERIAL_RX_PIN P0_04 + #define E1_SERIAL_TX_PIN P2_02 + #define E1_SERIAL_RX_PIN P2_02 + #define E2_SERIAL_TX_PIN P2_06 + #define E2_SERIAL_RX_PIN P2_06 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -112,36 +112,36 @@ // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_24_A1 // AD0[0] on P0_23 -#define TEMP_BED_PIN P0_23_A0 // AD0[1] on P0_24 +#define TEMP_0_PIN P0_24_A1 // AD0[0] on P0_23 +#define TEMP_BED_PIN P0_23_A0 // AD0[1] on P0_24 // // Heaters / Fans // -#define HEATER_BED_PIN P1_19 // Not a PWM pin, software PWM required -#define HEATER_0_PIN P3_26 // PWM1[3] -#define FAN_PIN P3_25 // Part cooling fan - connected to PWM1[2] -#define E0_AUTO_FAN_PIN P0_27 // Extruder cooling fan +#define HEATER_BED_PIN P1_19 // Not a PWM pin, software PWM required +#define HEATER_0_PIN P3_26 // PWM1[3] +#define FAN_PIN P3_25 // Part cooling fan - connected to PWM1[2] +#define E0_AUTO_FAN_PIN P0_27 // Extruder cooling fan // // Misc. Functions // -#define LED_PIN P1_31 +#define LED_PIN P1_31 // // LCD // #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN P0_19 - #define BTN_EN1 P1_23 - #define BTN_EN2 P1_24 - #define BTN_ENC P1_25 - #define LCD_PINS_RS P0_20 - #define LCD_PINS_ENABLE P0_21 - #define LCD_PINS_D4 P2_11 - #define LCD_PINS_D5 P0_22 - #define LCD_PINS_D6 P1_29 - #define LCD_PINS_D7 P1_28 + #define BEEPER_PIN P0_19 + #define BTN_EN1 P1_23 + #define BTN_EN2 P1_24 + #define BTN_ENC P1_25 + #define LCD_PINS_RS P0_20 + #define LCD_PINS_ENABLE P0_21 + #define LCD_PINS_D4 P2_11 + #define LCD_PINS_D5 P0_22 + #define LCD_PINS_D6 P1_29 + #define LCD_PINS_D7 P1_28 #endif // @@ -149,21 +149,21 @@ // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) - #define SCK_PIN P0_15 - #define MISO_PIN P0_17 - #define MOSI_PIN P0_18 - #define SS_PIN P0_16 + #define SCK_PIN P0_15 + #define MISO_PIN P0_17 + #define MOSI_PIN P0_18 + #define SS_PIN P0_16 #elif SD_CONNECTION_IS(ONBOARD) #undef SD_DETECT_PIN - #define SD_DETECT_PIN P0_27 - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SD_DETECT_PIN P0_27 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #endif diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index 28b94f019a..0cd10ebc05 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -46,73 +46,73 @@ //#define SDCARD_EEPROM_EMULATION #endif -#define LED_PIN P1_18 // Used as a status indicator -#define LED2_PIN P1_19 -#define LED3_PIN P1_20 -#define LED4_PIN P1_21 +#define LED_PIN P1_18 // Used as a status indicator +#define LED2_PIN P1_19 +#define LED3_PIN P1_20 +#define LED4_PIN P1_21 // // Servos // -#define SERVO0_PIN P1_23 // J8-3 (low jitter) -#define SERVO1_PIN P2_12 // J8-4 -#define SERVO2_PIN P2_11 // J8-5 -#define SERVO3_PIN P4_28 // J8-6 +#define SERVO0_PIN P1_23 // J8-3 (low jitter) +#define SERVO1_PIN P2_12 // J8-4 +#define SERVO2_PIN P2_11 // J8-5 +#define SERVO3_PIN P4_28 // J8-6 // // Limit Switches - Not Interrupt Capable // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series -#define Z_MIN_PIN P1_28 // The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22) -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_28 // The original Mks Sbase DIO19 has a 10k pullup to 3.3V or 5V, 1K series, so when using a Zprobe we must use DIO41 (J8 P1.22) +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN P4_28 // Connector J8 + #define Z_MIN_PROBE_PIN P4_28 // Connector J8 #endif // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) -#define TEMP_0_PIN P0_24_A1 // A1 (TH2) -#define TEMP_1_PIN P0_25_A2 // A2 (TH3) -#define TEMP_2_PIN P0_26_A3 // A3 (TH4) +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) +#define TEMP_2_PIN P0_26_A3 // A3 (TH4) // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 -#define HEATER_1_PIN P2_06 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 #ifndef FAN_PIN - #define FAN_PIN P2_04 + #define FAN_PIN P2_04 #endif // @@ -124,56 +124,56 @@ // 5V // NC // GND -#define PIN_P0_17 P0_17 -#define PIN_P0_16 P0_16 -#define PIN_P0_15 P0_15 +#define PIN_P0_17 P0_17 +#define PIN_P0_16 P0_16 +#define PIN_P0_15 P0_15 // // Connector J8 // // GND -#define PIN_P1_22 P1_22 -#define PIN_P1_23 P1_23 // PWM Capable -#define PIN_P2_12 P2_12 // Interrupt Capable -#define PIN_P2_11 P2_11 // Interrupt Capable +#define PIN_P1_22 P1_22 +#define PIN_P1_23 P1_23 // PWM Capable +#define PIN_P2_12 P2_12 // Interrupt Capable +#define PIN_P2_11 P2_11 // Interrupt Capable // // Průša i3 MK2 Multi Material Multiplexer Support // #if ENABLED(MK2_MULTIPLEXER) - #define E_MUX0_PIN P1_23 // J8-3 - #define E_MUX1_PIN P2_12 // J8-4 - #define E_MUX2_PIN P2_11 // J8-5 + #define E_MUX0_PIN P1_23 // J8-3 + #define E_MUX1_PIN P2_12 // J8-4 + #define E_MUX2_PIN P2_11 // J8-5 #endif // // Misc. Functions // -#define PS_ON_PIN P0_25 // TH3 Connector +#define PS_ON_PIN P0_25 // TH3 Connector // // Ethernet pins // #ifndef ULTIPANEL - #define ENET_MDIO P1_17 // J12-4 - #define ENET_RX_ER P1_14 // J12-6 - #define ENET_RXD1 P1_10 // J12-8 + #define ENET_MDIO P1_17 // J12-4 + #define ENET_RX_ER P1_14 // J12-6 + #define ENET_RXD1 P1_10 // J12-8 #endif -#define ENET_MOC P1_16 // J12-3 -#define REF_CLK P1_15 // J12-5 -#define ENET_RXD0 P1_09 // J12-7 -#define ENET_CRS P1_08 // J12-9 -#define ENET_TX_EN P1_04 // J12-10 -#define ENET_TXD0 P1_00 // J12-11 -#define ENET_TXD1 P1_01 // J12-12 +#define ENET_MOC P1_16 // J12-3 +#define REF_CLK P1_15 // J12-5 +#define ENET_RXD0 P1_09 // J12-7 +#define ENET_CRS P1_08 // J12-9 +#define ENET_TX_EN P1_04 // J12-10 +#define ENET_TXD0 P1_00 // J12-11 +#define ENET_TXD1 P1_01 // J12-12 #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(CUSTOM_CABLE) @@ -189,27 +189,27 @@ * If you can't find a pin to use for the LCD's SD_DETECT then comment out * SD_DETECT_PIN entirely and remove that wire from the the custom cable. */ - #define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27) - #define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) - #define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) - #define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9) - #define SS_PIN P0_28 - #define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the - // selected pins are not on a hardware SPI controller + #define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27) + #define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) + #define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) + #define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9) + #define SS_PIN P0_28 + #define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the + // selected pins are not on a hardware SPI controller #elif SD_CONNECTION_IS(LCD) // use standard cable and header, SPI and SD detect sre shared with on-board SD card // hardware SPI is used for both SD cards. The detect pin is shred between the // LCD and onboard SD readers so we disable it. - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN P0_28 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN P0_28 #elif SD_CONNECTION_IS(ONBOARD) - #define SD_DETECT_PIN P0_27 - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SD_DETECT_PIN P0_27 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #endif /** @@ -226,17 +226,17 @@ */ #if HAS_SPI_LCD - #define BEEPER_PIN P1_31 // EXP1.1 - #define BTN_ENC P1_30 // EXP1.2 - #define BTN_EN1 P3_26 // EXP2.5 - #define BTN_EN2 P3_25 // EXP2.3 - #define LCD_PINS_RS P0_16 // EXP1.4 - #define LCD_SDSS P0_28 // EXP2.4 - #define LCD_PINS_ENABLE P0_18 // EXP1.3 - #define LCD_PINS_D4 P0_15 // EXP1.5 + #define BEEPER_PIN P1_31 // EXP1.1 + #define BTN_ENC P1_30 // EXP1.2 + #define BTN_EN1 P3_26 // EXP2.5 + #define BTN_EN2 P3_25 // EXP2.3 + #define LCD_PINS_RS P0_16 // EXP1.4 + #define LCD_SDSS P0_28 // EXP2.4 + #define LCD_PINS_ENABLE P0_18 // EXP1.3 + #define LCD_PINS_D4 P0_15 // EXP1.5 #if ANY(VIKI2, miniVIKI) - #define DOGLCD_SCK SCK_PIN - #define DOGLCD_MOSI MOSI_PIN + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN #endif #if ENABLED(FYSETC_MINI_12864) @@ -251,26 +251,26 @@ * Pins 6, 7 & 8 on EXP2 are no connects. That means a second special * cable will be needed if the RGB LEDs are to be active. */ - #define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on FYSETC schematic) - #define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on FYSETC schematic) - #define DOGLCD_SCK P2_11 // J8-5 (SCK on FYSETC schematic) - #define DOGLCD_MOSI P4_28 // J8-6 (MOSI on FYSETC schematic) + #define DOGLCD_CS LCD_PINS_ENABLE // EXP1.3 (LCD_EN on FYSETC schematic) + #define DOGLCD_A0 LCD_PINS_RS // EXP1.4 (LCD_A0 on FYSETC schematic) + #define DOGLCD_SCK P2_11 // J8-5 (SCK on FYSETC schematic) + #define DOGLCD_MOSI P4_28 // J8-6 (MOSI on FYSETC schematic) - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on FYSETC schematic) + #define RGB_LED_R_PIN P2_12 // J8-4 (LCD_D6 on FYSETC schematic) #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on FYSETC schematic) + #define RGB_LED_G_PIN P1_23 // J8-3 (LCD_D5 on FYSETC schematic) #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on FYSETC schematic) + #define RGB_LED_B_PIN P1_22 // J8-2 (LCD_D7 on FYSETC schematic) #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN P2_12 + #define NEOPIXEL_PIN P2_12 #endif #elif ENABLED(MINIPANEL) @@ -291,24 +291,24 @@ #if HAS_DRIVER(TMC2130) // J8 - #define X_CS_PIN P1_22 - #define Y_CS_PIN P1_23 - #define Z_CS_PIN P2_12 - #define E0_CS_PIN P2_11 - #define E1_CS_PIN P4_28 + #define X_CS_PIN P1_22 + #define Y_CS_PIN P1_23 + #define Z_CS_PIN P2_12 + #define E0_CS_PIN P2_11 + #define E1_CS_PIN P4_28 // Hardware SPI is on EXP2. See if you can make it work: // https://github.com/makerbase-mks/MKS-SBASE/issues/25 #define TMC_USE_SW_SPI #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P0_03 // AUX1 + #define TMC_SW_MOSI P0_03 // AUX1 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P0_02 // AUX1 + #define TMC_SW_MISO P0_02 // AUX1 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P0_26 // TH4 + #define TMC_SW_SCK P0_26 // TH4 #endif #endif #endif @@ -322,24 +322,24 @@ * Worst case you may have to give up the LCD * RX pins need to be interrupt capable */ - #define X_SERIAL_TX_PIN P1_22 // J8-2 - #define X_SERIAL_RX_PIN P2_12 // J8-4 Interrupt Capable - #define Y_SERIAL_TX_PIN P1_23 // J8-3 - #define Y_SERIAL_RX_PIN P2_11 // J8-5 Interrupt Capable - #define Z_SERIAL_TX_PIN P2_12 // J8-4 - #define Z_SERIAL_RX_PIN P0_25 // TH3 - #define E0_SERIAL_TX_PIN P4_28 // J8-6 - #define E0_SERIAL_RX_PIN P0_26 // TH4 + #define X_SERIAL_TX_PIN P1_22 // J8-2 + #define X_SERIAL_RX_PIN P2_12 // J8-4 Interrupt Capable + #define Y_SERIAL_TX_PIN P1_23 // J8-3 + #define Y_SERIAL_RX_PIN P2_11 // J8-5 Interrupt Capable + #define Z_SERIAL_TX_PIN P2_12 // J8-4 + #define Z_SERIAL_RX_PIN P0_25 // TH3 + #define E0_SERIAL_TX_PIN P4_28 // J8-6 + #define E0_SERIAL_RX_PIN P0_26 // TH4 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 #endif // UNUSED -#define PIN_P0_27 P0_27 // EXP2/Onboard SD -#define PIN_P0_28 P0_28 // EXP2 -#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) -#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +#define PIN_P0_27 P0_27 // EXP2/Onboard SD +#define PIN_P0_28 P0_28 // EXP2 +#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) /** * PWMs diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index 5dc1db8f3f..afbe6d5564 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -41,100 +41,100 @@ // // Servos // -#define SERVO0_PIN P1_23 // SERVO P1.23 -#define SERVO1_PIN P2_00 // SERVO P2.0 +#define SERVO0_PIN P1_23 // SERVO P1.23 +#define SERVO1_PIN P2_00 // SERVO P2.0 // // Trinamic Stallguard pins // -#define X_DIAG_PIN P1_29 // X- -#define Y_DIAG_PIN P1_27 // Y- -#define Z_DIAG_PIN P1_25 // Z- -#define E0_DIAG_PIN P1_28 // X+ -#define E1_DIAG_PIN P1_26 // Y+ +#define X_DIAG_PIN P1_29 // X- +#define Y_DIAG_PIN P1_27 // Y- +#define Z_DIAG_PIN P1_25 // Z- +#define E0_DIAG_PIN P1_28 // X+ +#define E1_DIAG_PIN P1_26 // Y+ // // Limit Switches // #if X_STALL_SENSITIVITY - #define X_STOP_PIN X_DIAG_PIN + #define X_STOP_PIN X_DIAG_PIN #if X_HOME_DIR < 0 - #define X_MAX_PIN P1_28 // X+ + #define X_MAX_PIN P1_28 // X+ #else - #define X_MIN_PIN P1_28 // X+ + #define X_MIN_PIN P1_28 // X+ #endif #else - #define X_MIN_PIN P1_29 // X- - #define X_MAX_PIN P1_28 // X+ + #define X_MIN_PIN P1_29 // X- + #define X_MAX_PIN P1_28 // X+ #endif #if Y_STALL_SENSITIVITY - #define Y_STOP_PIN Y_DIAG_PIN + #define Y_STOP_PIN Y_DIAG_PIN #if Y_HOME_DIR < 0 - #define Y_MAX_PIN P1_26 // Y+ + #define Y_MAX_PIN P1_26 // Y+ #else - #define Y_MIN_PIN P1_26 // Y+ + #define Y_MIN_PIN P1_26 // Y+ #endif #else - #define Y_MIN_PIN P1_27 // Y- - #define Y_MAX_PIN P1_26 // Y+ + #define Y_MIN_PIN P1_27 // Y- + #define Y_MAX_PIN P1_26 // Y+ #endif #if Z_STALL_SENSITIVITY - #define Z_STOP_PIN Z_DIAG_PIN + #define Z_STOP_PIN Z_DIAG_PIN #if Z_HOME_DIR < 0 - #define Z_MAX_PIN P1_24 // Z+ + #define Z_MAX_PIN P1_24 // Z+ #else - #define Z_MIN_PIN P1_24 // Z+ + #define Z_MIN_PIN P1_24 // Z+ #endif #else - #define Z_MIN_PIN P1_25 // Z- - #define Z_MAX_PIN P1_24 // Z+ + #define Z_MIN_PIN P1_25 // Z- + #define Z_MAX_PIN P1_24 // Z+ #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN P1_24 + #define Z_MIN_PROBE_PIN P1_24 #endif // // Steppers // -#define X_STEP_PIN P2_02 -#define X_DIR_PIN P2_03 -#define X_ENABLE_PIN P2_01 +#define X_STEP_PIN P2_02 +#define X_DIR_PIN P2_03 +#define X_ENABLE_PIN P2_01 #ifndef X_CS_PIN - #define X_CS_PIN P1_01 + #define X_CS_PIN P1_01 #endif -#define Y_STEP_PIN P0_19 -#define Y_DIR_PIN P0_20 -#define Y_ENABLE_PIN P2_08 +#define Y_STEP_PIN P0_19 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P2_08 #ifndef Y_CS_PIN - #define Y_CS_PIN P1_08 + #define Y_CS_PIN P1_08 #endif -#define Z_STEP_PIN P0_22 -#define Z_DIR_PIN P2_11 -#define Z_ENABLE_PIN P0_21 +#define Z_STEP_PIN P0_22 +#define Z_DIR_PIN P2_11 +#define Z_ENABLE_PIN P0_21 #ifndef Z_CS_PIN - #define Z_CS_PIN P1_10 + #define Z_CS_PIN P1_10 #endif -#define E0_STEP_PIN P2_13 -#define E0_DIR_PIN P0_11 -#define E0_ENABLE_PIN P2_12 +#define E0_STEP_PIN P2_13 +#define E0_DIR_PIN P0_11 +#define E0_ENABLE_PIN P2_12 #ifndef E0_CS_PIN - #define E0_CS_PIN P1_15 + #define E0_CS_PIN P1_15 #endif -#define E1_STEP_PIN P0_01 -#define E1_DIR_PIN P0_00 -#define E1_ENABLE_PIN P0_10 +#define E1_STEP_PIN P0_01 +#define E1_DIR_PIN P0_00 +#define E1_ENABLE_PIN P0_10 #ifndef E1_CS_PIN - #define E1_CS_PIN P1_17 + #define E1_CS_PIN P1_17 #endif // @@ -142,13 +142,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P4_28 + #define TMC_SW_MOSI P4_28 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P0_05 + #define TMC_SW_MISO P0_05 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P0_04 + #define TMC_SW_SCK P0_04 #endif #endif @@ -175,23 +175,23 @@ // Software serial // - #define X_SERIAL_TX_PIN P1_04 - #define X_SERIAL_RX_PIN P1_01 + #define X_SERIAL_TX_PIN P1_04 + #define X_SERIAL_RX_PIN P1_01 - #define Y_SERIAL_TX_PIN P1_09 - #define Y_SERIAL_RX_PIN P1_08 + #define Y_SERIAL_TX_PIN P1_09 + #define Y_SERIAL_RX_PIN P1_08 - #define Z_SERIAL_TX_PIN P1_14 - #define Z_SERIAL_RX_PIN P1_10 + #define Z_SERIAL_TX_PIN P1_14 + #define Z_SERIAL_RX_PIN P1_10 - #define E0_SERIAL_TX_PIN P1_16 - #define E0_SERIAL_RX_PIN P1_15 + #define E0_SERIAL_TX_PIN P1_16 + #define E0_SERIAL_RX_PIN P1_15 - #define E1_SERIAL_TX_PIN P4_29 - #define E1_SERIAL_RX_PIN P1_17 + #define E1_SERIAL_TX_PIN P4_29 + #define E1_SERIAL_RX_PIN P1_17 - #define Z2_SERIAL_TX_PIN P4_29 - #define Z2_SERIAL_RX_PIN P1_17 + #define Z2_SERIAL_TX_PIN P4_29 + #define Z2_SERIAL_RX_PIN P1_17 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -201,35 +201,35 @@ // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1) -#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB) -#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2) +#define TEMP_0_PIN P0_23_A0 // Analog Input A0 (TH1) +#define TEMP_BED_PIN P0_24_A1 // Analog Input A1 (TB) +#define TEMP_1_PIN P0_25_A2 // Analog Input A2 (TH2) // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 #if HOTENDS == 1 #ifndef FAN1_PIN - #define FAN1_PIN P2_06 + #define FAN1_PIN P2_06 #endif #else #ifndef HEATER_1_PIN - #define HEATER_1_PIN P2_06 + #define HEATER_1_PIN P2_06 #endif #endif #ifndef FAN_PIN - #define FAN_PIN P2_04 + #define FAN_PIN P2_04 #endif // // Misc. Functions // -#define LED_PIN P1_18 // Used as a status indicator -#define LED2_PIN P1_19 -#define LED3_PIN P1_20 -#define LED4_PIN P1_21 +#define LED_PIN P1_18 // Used as a status indicator +#define LED2_PIN P1_19 +#define LED3_PIN P1_20 +#define LED4_PIN P1_21 /** * _____ _____ @@ -242,83 +242,83 @@ * EXP1 EXP2 */ #if HAS_SPI_LCD - #define BEEPER_PIN P1_31 - #define BTN_ENC P1_30 + #define BEEPER_PIN P1_31 + #define BTN_ENC P1_30 #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS P1_00 + #define LCD_PINS_RS P1_00 - #define BTN_EN1 P0_18 - #define BTN_EN2 P0_15 + #define BTN_EN1 P0_18 + #define BTN_EN2 P0_15 - #define LCD_PINS_ENABLE P1_22 - #define LCD_PINS_D4 P0_17 + #define LCD_PINS_ENABLE P1_22 + #define LCD_PINS_D4 P0_17 #else - #define BTN_EN1 P3_25 - #define BTN_EN2 P3_26 + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 - #define LCD_SDSS P0_28 + #define LCD_SDSS P0_28 #if ENABLED(MKS_12864OLED_SSD1306) - #define LCD_PINS_DC P0_17 - #define DOGLCD_CS P0_16 - #define DOGLCD_A0 LCD_PINS_DC - #define DOGLCD_SCK P0_15 - #define DOGLCD_MOSI P0_18 + #define LCD_PINS_DC P0_17 + #define DOGLCD_CS P0_16 + #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 - #define LCD_PINS_RS P1_00 - #define LCD_PINS_D7 P1_22 - #define KILL_PIN -1 // NC + #define LCD_PINS_RS P1_00 + #define LCD_PINS_D7 P1_22 + #define KILL_PIN -1 // NC - #else // !MKS_12864OLED_SSD1306 + #else // !MKS_12864OLED_SSD1306 - #define LCD_PINS_RS P0_16 + #define LCD_PINS_RS P0_16 - #define LCD_PINS_ENABLE P0_18 - #define LCD_PINS_D4 P0_15 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS P0_18 - #define DOGLCD_A0 P0_16 - #define DOGLCD_SCK P0_07 - #define DOGLCD_MOSI P1_20 + #define DOGLCD_CS P0_18 + #define DOGLCD_A0 P0_16 + #define DOGLCD_SCK P0_07 + #define DOGLCD_MOSI P1_20 - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 - #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN P0_15 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN P0_17 + #define RGB_LED_R_PIN P0_17 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN P1_00 + #define RGB_LED_G_PIN P1_00 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN P1_22 + #define RGB_LED_B_PIN P1_22 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN P0_17 + #define NEOPIXEL_PIN P0_17 #endif - #else // !FYSETC_MINI_12864 + #else // !FYSETC_MINI_12864 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS P0_17 - #define DOGLCD_A0 P1_00 + #define DOGLCD_CS P0_17 + #define DOGLCD_A0 P1_00 #endif #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 P0_17 - #define LCD_PINS_D6 P1_00 - #define LCD_PINS_D7 P1_22 + #define LCD_PINS_D5 P0_17 + #define LCD_PINS_D6 P1_00 + #define LCD_PINS_D7 P1_22 #endif #endif // !FYSETC_MINI_12864 @@ -330,20 +330,20 @@ #endif // HAS_SPI_LCD #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD) - #define SD_DETECT_PIN P0_27 - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 + #define SD_DETECT_PIN P0_27 + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 #if SD_CONNECTION_IS(ONBOARD) - #define SS_PIN ONBOARD_SD_CS_PIN + #define SS_PIN ONBOARD_SD_CS_PIN #else - #define SS_PIN P0_28 + #define SS_PIN P0_28 #endif #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." @@ -352,6 +352,6 @@ // // Other Pins // -//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) -//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) -//#define PS_ON_PIN P1_23 // SERVO P1.23 +//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PS_ON_PIN P1_23 // SERVO P1.23 diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 2303c1885c..b8b04a348c 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -51,58 +51,58 @@ // // Servos // -#define SERVO0_PIN P1_20 // (11) -#define SERVO1_PIN P1_21 // ( 6) also on J5-1 -#define SERVO2_PIN P1_19 // ( 5) -#define SERVO3_PIN P1_18 // ( 4) 5V output +#define SERVO0_PIN P1_20 // (11) +#define SERVO1_PIN P1_21 // ( 6) also on J5-1 +#define SERVO2_PIN P1_19 // ( 5) +#define SERVO3_PIN P1_18 // ( 4) 5V output // // Limit Switches // -#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series -#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series -#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series -#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series -#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series -#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series -#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups +#define X_MIN_PIN P1_24 // ( 3) 10k pullup to 3.3V, 1K series +#define X_MAX_PIN P1_25 // ( 2) 10k pullup to 3.3V, 1K series +#define Y_MIN_PIN P1_26 // (14) 10k pullup to 3.3V, 1K series +#define Y_MAX_PIN P1_27 // (15) 10k pullup to 3.3V, 1K series +#define Z_MIN_PIN P1_29 // (18) 10k pullup to 3.3V, 1K series +#define Z_MAX_PIN P1_28 // (19) 10k pullup to 3.3V, 1K series +#define ONBOARD_ENDSTOPPULLUPS // Board has built-in pullups // // Steppers // -#define X_STEP_PIN P2_01 // (54) -#define X_DIR_PIN P0_11 // (55) -#define X_ENABLE_PIN P0_10 // (38) +#define X_STEP_PIN P2_01 // (54) +#define X_DIR_PIN P0_11 // (55) +#define X_ENABLE_PIN P0_10 // (38) #ifndef X_CS_PIN - #define X_CS_PIN P1_01 // ETH + #define X_CS_PIN P1_01 // ETH #endif -#define Y_STEP_PIN P2_02 // (60) -#define Y_DIR_PIN P0_20 // (61) -#define Y_ENABLE_PIN P0_19 // (56) +#define Y_STEP_PIN P2_02 // (60) +#define Y_DIR_PIN P0_20 // (61) +#define Y_ENABLE_PIN P0_19 // (56) #ifndef Y_CS_PIN - #define Y_CS_PIN P1_04 // ETH + #define Y_CS_PIN P1_04 // ETH #endif -#define Z_STEP_PIN P2_03 // (46) -#define Z_DIR_PIN P0_22 // (48) -#define Z_ENABLE_PIN P0_21 // (62) +#define Z_STEP_PIN P2_03 // (46) +#define Z_DIR_PIN P0_22 // (48) +#define Z_ENABLE_PIN P0_21 // (62) #ifndef Z_CS_PIN - #define Z_CS_PIN P1_10 // ETH + #define Z_CS_PIN P1_10 // ETH #endif -#define E0_STEP_PIN P2_00 // (26) -#define E0_DIR_PIN P0_05 // (28) -#define E0_ENABLE_PIN P0_04 // (24) +#define E0_STEP_PIN P2_00 // (26) +#define E0_DIR_PIN P0_05 // (28) +#define E0_ENABLE_PIN P0_04 // (24) #ifndef E0_CS_PIN - #define E0_CS_PIN P1_14 // ETH + #define E0_CS_PIN P1_14 // ETH #endif -#define E1_STEP_PIN P2_08 // (36) -#define E1_DIR_PIN P2_13 // (34) -#define E1_ENABLE_PIN P4_29 // (30) +#define E1_STEP_PIN P2_08 // (36) +#define E1_DIR_PIN P2_13 // (34) +#define E1_ENABLE_PIN P4_29 // (30) #ifndef E1_CS_PIN - #define E1_CS_PIN -1 + #define E1_CS_PIN -1 #endif // @@ -110,13 +110,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P1_00 // ETH + #define TMC_SW_MOSI P1_00 // ETH #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P1_08 // ETH + #define TMC_SW_MISO P1_08 // ETH #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P1_09 // ETH + #define TMC_SW_SCK P1_09 // ETH #endif #endif @@ -136,31 +136,31 @@ // P2_13 E1-Dir #ifndef X_SERIAL_TX_PIN - #define X_SERIAL_TX_PIN P0_01 + #define X_SERIAL_TX_PIN P0_01 #endif #ifndef X_SERIAL_RX_PIN - #define X_SERIAL_RX_PIN P0_01 + #define X_SERIAL_RX_PIN P0_01 #endif #ifndef Y_SERIAL_TX_PIN - #define Y_SERIAL_TX_PIN P0_00 + #define Y_SERIAL_TX_PIN P0_00 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN P0_00 + #define Y_SERIAL_RX_PIN P0_00 #endif #ifndef Z_SERIAL_TX_PIN - #define Z_SERIAL_TX_PIN P2_13 + #define Z_SERIAL_TX_PIN P2_13 #endif #ifndef Z_SERIAL_RX_PIN - #define Z_SERIAL_RX_PIN P2_13 + #define Z_SERIAL_RX_PIN P2_13 #endif #ifndef E0_SERIAL_TX_PIN - #define E0_SERIAL_TX_PIN P2_08 + #define E0_SERIAL_TX_PIN P2_08 #endif #ifndef E0_SERIAL_RX_PIN - #define E0_SERIAL_RX_PIN P2_08 + #define E0_SERIAL_RX_PIN P2_08 #endif // Reduce baud rate to improve software serial reliability @@ -171,14 +171,14 @@ // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_0_PIN -#define TEMP_BED_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_BED_PIN -#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN -#define TEMP_2_PIN P0_26_A3 // A3 - (63) - J5-3 & AUX-2 -#define TEMP_3_PIN P1_30_A4 // A4 - (37) - BUZZER_PIN -//#define TEMP_4_PIN P1_31_A5 // A5 - (49) - SD_DETECT_PIN +#define TEMP_0_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_0_PIN +#define TEMP_BED_PIN P0_24_A1 // A1 (T1) - (68) - TEMP_BED_PIN +#define TEMP_1_PIN P0_25_A2 // A2 (T2) - (69) - TEMP_1_PIN +#define TEMP_2_PIN P0_26_A3 // A3 - (63) - J5-3 & AUX-2 +#define TEMP_3_PIN P1_30_A4 // A4 - (37) - BUZZER_PIN +//#define TEMP_4_PIN P1_31_A5 // A5 - (49) - SD_DETECT_PIN //#define ?? P0_03_A6 // A6 - ( 0) - RXD0 - J4-4 & AUX-1 -#define FILWIDTH_PIN P0_02_A7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1 +#define FILWIDTH_PIN P0_02_A7 // A7 - ( 1) - TXD0 - J4-5 & AUX-1 // // Augmentation for auto-assigning RAMPS plugs @@ -201,69 +201,69 @@ // Heaters / Fans // #ifndef MOSFET_D_PIN - #define MOSFET_D_PIN -1 + #define MOSFET_D_PIN -1 #endif #ifndef RAMPS_D8_PIN - #define RAMPS_D8_PIN P2_07 // (8) + #define RAMPS_D8_PIN P2_07 // (8) #endif #ifndef RAMPS_D9_PIN - #define RAMPS_D9_PIN P2_04 // (9) + #define RAMPS_D9_PIN P2_04 // (9) #endif #ifndef RAMPS_D10_PIN - #define RAMPS_D10_PIN P2_05 // (10) + #define RAMPS_D10_PIN P2_05 // (10) #endif -#define HEATER_0_PIN RAMPS_D10_PIN +#define HEATER_0_PIN RAMPS_D10_PIN -#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed - #define HEATER_BED_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan - #define HEATER_1_PIN RAMPS_D9_PIN -#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed - #define HEATER_1_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan - #define FAN1_PIN RAMPS_D8_PIN -#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") - #define HEATER_BED_PIN RAMPS_D8_PIN +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN #if HOTENDS == 1 - #define FAN1_PIN MOSFET_D_PIN + #define FAN1_PIN MOSFET_D_PIN #else - #define HEATER_1_PIN MOSFET_D_PIN + #define HEATER_1_PIN MOSFET_D_PIN #endif #endif #ifndef FAN_PIN #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan - #define FAN_PIN RAMPS_D9_PIN + #define FAN_PIN RAMPS_D9_PIN #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan - #define FAN_PIN RAMPS_D8_PIN - #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed - #define FAN_PIN P1_18 // (4) IO pin. Buffer needed - #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN RAMPS_D9_PIN + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN P1_18 // (4) IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN #endif #endif // // Misc. Functions // -#define LED_PIN P4_28 // (13) +#define LED_PIN P4_28 // (13) // define digital pin 5 for the filament runout sensor. Use the RAMPS 1.4 digital input 5 on the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN P1_19 // (5) + #define FIL_RUNOUT_PIN P1_19 // (5) #endif -#define PS_ON_PIN P2_12 // (12) +#define PS_ON_PIN P2_12 // (12) #if !defined(MAX6675_SS_PIN) && DISABLED(USE_ZMAX_PLUG) - #define MAX6675_SS_PIN P1_28 + #define MAX6675_SS_PIN P1_28 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENA_PIN) - #if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // Try to use servo connector - #define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM + #if !defined(NUM_SERVOS) || NUM_SERVOS < 4 // Try to use servo connector + #define CASE_LIGHT_PIN P1_18 // (4) MUST BE HARDWARE PWM #endif #endif @@ -279,19 +279,19 @@ #error "LASER_FEATURE requires 3 free servo pins." #endif #endif - #define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown! - #define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM - #define SPINDLE_DIR_PIN SERVO2_PIN // (5) + #define SPINDLE_LASER_ENA_PIN SERVO1_PIN // (6) Pin should have a pullup/pulldown! + #define SPINDLE_LASER_PWM_PIN SERVO3_PIN // (4) MUST BE HARDWARE PWM + #define SPINDLE_DIR_PIN SERVO2_PIN // (5) #endif // // Průša i3 MK2 Multiplexer Support // #if SERIAL_PORT != 0 && SERIAL_PORT_2 != 0 - #define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN - #define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN + #define E_MUX0_PIN P0_03 // ( 0) Z_CS_PIN + #define E_MUX1_PIN P0_02 // ( 1) E0_CS_PIN #endif -#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN +#define E_MUX2_PIN P0_26 // (63) E1_CS_PIN /** * LCD / Controller @@ -322,101 +322,101 @@ // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. // Requires REVERSE_ENCODER_DIRECTION in Configuration.h - #define BEEPER_PIN P2_11 // J3-3 & AUX-4 + #define BEEPER_PIN P2_11 // J3-3 & AUX-4 - #define BTN_EN1 P0_16 // J3-7 & AUX-4 - #define BTN_EN2 P1_23 // J3-5 & AUX-4 - #define BTN_ENC P3_25 // J3-4 & AUX-4 + #define BTN_EN1 P0_16 // J3-7 & AUX-4 + #define BTN_EN2 P1_23 // J3-5 & AUX-4 + #define BTN_ENC P3_25 // J3-4 & AUX-4 - #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) - #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) - #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) + #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) + #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) + #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) #elif HAS_SPI_LCD - //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 - //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 - //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 - //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) + //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 + //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 + //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 + //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) #if ENABLED(FYSETC_MINI_12864) - #define BEEPER_PIN P1_01 - #define BTN_ENC P1_04 + #define BEEPER_PIN P1_01 + #define BTN_ENC P1_04 #else - #define BEEPER_PIN P1_30 // (37) not 5V tolerant - #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + #define BEEPER_PIN P1_30 // (37) not 5V tolerant + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 #endif - #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 - #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 - #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) - #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 - #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 - #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 + #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 #if ENABLED(NEWPANEL) #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 - #define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) #endif #else - //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 - //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 - //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 - //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 #endif #if ANY(VIKI2, miniVIKI) // #define LCD_SCREEN_ROT_180 - #define DOGLCD_CS P0_16 // (16) - #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 - #define DOGLCD_SCK SCK_PIN - #define DOGLCD_MOSI MOSI_PIN + #define DOGLCD_CS P0_16 // (16) + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN - #define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes - #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes + #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #else #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_SCK P0_15 - #define DOGLCD_MOSI P0_18 + #define DOGLCD_SCK P0_15 + #define DOGLCD_MOSI P0_18 // EXP1 on LCD adapter is not usable - using Ethernet connector instead - #define DOGLCD_CS P1_09 - #define DOGLCD_A0 P1_14 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + #define DOGLCD_CS P1_09 + #define DOGLCD_A0 P1_14 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN P0_16 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN P1_00 + #define RGB_LED_R_PIN P1_00 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN P1_01 + #define RGB_LED_G_PIN P1_01 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN P1_08 + #define RGB_LED_B_PIN P1_08 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN P1_00 + #define NEOPIXEL_PIN P1_00 #endif #else - #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 - #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #endif - #define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers - #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 + #define LCD_BACKLIGHT_PIN P0_16 //(16) J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO - #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER - #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 + #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO + #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER + #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 #endif #endif @@ -434,38 +434,38 @@ // Ethernet pins // #if DISABLED(ULTIPANEL) - #define ENET_MDIO P1_17 // (71) J12-4 - #define ENET_RX_ER P1_14 // (73) J12-6 - #define ENET_RXD1 P1_10 // (75) J12-8 + #define ENET_MDIO P1_17 // (71) J12-4 + #define ENET_RX_ER P1_14 // (73) J12-6 + #define ENET_RXD1 P1_10 // (75) J12-8 #endif -#define ENET_MOC P1_16 // (70) J12-3 -#define REF_CLK P1_15 // (72) J12-5 -#define ENET_RXD0 P1_09 // (74) J12-7 -#define ENET_CRS P1_08 // (76) J12-9 -#define ENET_TX_EN P1_04 // (77) J12-10 -#define ENET_TXD0 P1_00 // (78) J12-11 -#define ENET_TXD1 P1_01 // (79) J12-12 +#define ENET_MOC P1_16 // (70) J12-3 +#define REF_CLK P1_15 // (72) J12-5 +#define ENET_RXD0 P1_09 // (74) J12-7 +#define ENET_CRS P1_08 // (76) J12-9 +#define ENET_TX_EN P1_04 // (77) J12-10 +#define ENET_TXD0 P1_00 // (78) J12-11 +#define ENET_TXD1 P1_01 // (79) J12-12 // // SD Support // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) - #define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 - #define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 - #define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 - #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin + #define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 + #define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 + #define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 + #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #elif SD_CONNECTION_IS(ONBOARD) #undef SD_DETECT_PIN - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h index 3c55ac9be3..6f84f87bba 100644 --- a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -41,80 +41,79 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_28 -#define X_MAX_PIN P1_25 -#define Y_MIN_PIN P2_11 -#define Y_MAX_PIN -1 -#define Z_MIN_PIN P1_27 -#define Z_MAX_PIN -1 -#define Z_PROBE P1_22 +#define X_MIN_PIN P1_28 +#define X_MAX_PIN P1_25 +#define Y_MIN_PIN P2_11 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN P1_27 +#define Z_MAX_PIN -1 +#define Z_PROBE P1_22 // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) -#define TEMP_0_PIN P0_24_A1 // A1 (TH2) -#define TEMP_1_PIN P0_25_A2 // A2 (TH3) - +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_BED2_PIN P2_04 -#define HEATER_0_PIN P2_07 -#define HEATER_1_PIN P2_06 +#define HEATER_BED_PIN P2_05 +#define HEATER_BED2_PIN P2_04 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P2_06 #ifndef FAN_PIN - #define FAN_PIN P1_24 + #define FAN_PIN P1_24 #endif -#define FAN1_PIN P1_26 +#define FAN1_PIN P1_26 // // Display // #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define LCD_PINS_RS P0_16 - #define LCD_PINS_ENABLE P0_18 - #define LCD_PINS_D4 P0_15 - #define LCD_PINS_D5 P1_00 - #define LCD_PINS_D6 P1_01 - #define LCD_PINS_D7 P1_04 - #define BEEPER_PIN P1_31 + #define LCD_PINS_RS P0_16 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + #define LCD_PINS_D5 P1_00 + #define LCD_PINS_D6 P1_01 + #define LCD_PINS_D7 P1_04 + #define BEEPER_PIN P1_31 - #define BTN_EN1 P3_25 - #define BTN_EN2 P3_26 - #define BTN_ENC P1_30 + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + #define BTN_ENC P1_30 - #define SD_DETECT_PIN -1 + #define SD_DETECT_PIN -1 #endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h index 1b91e4f50b..95cbd2163e 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h @@ -41,93 +41,92 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_24 -#define X_MAX_PIN P1_27 -#define Y_MIN_PIN P1_25 -#define Y_MAX_PIN P1_28 -#define Z_MIN_PIN P1_26 -#define Z_MAX_PIN P1_29 +#define X_MIN_PIN P1_24 +#define X_MAX_PIN P1_27 +#define Y_MIN_PIN P1_25 +#define Y_MAX_PIN P1_28 +#define Z_MIN_PIN P1_26 +#define Z_MAX_PIN P1_29 // // Steppers // -#define X_STEP_PIN P2_01 -#define X_DIR_PIN P0_11 -#define X_ENABLE_PIN P0_10 +#define X_STEP_PIN P2_01 +#define X_DIR_PIN P0_11 +#define X_ENABLE_PIN P0_10 #ifndef X_CS_PIN - #define X_CS_PIN P0_10 // BSD2660 default + #define X_CS_PIN P0_10 // BSD2660 default #endif -#define Y_STEP_PIN P2_02 -#define Y_DIR_PIN P0_20 -#define Y_ENABLE_PIN P0_19 +#define Y_STEP_PIN P2_02 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P0_19 #ifndef Y_CS_PIN - #define Y_CS_PIN P0_19 // BSD2660 default + #define Y_CS_PIN P0_19 // BSD2660 default #endif -#define Z_STEP_PIN P2_03 -#define Z_DIR_PIN P0_22 -#define Z_ENABLE_PIN P0_21 +#define Z_STEP_PIN P2_03 +#define Z_DIR_PIN P0_22 +#define Z_ENABLE_PIN P0_21 #ifndef Z_CS_PIN - #define Z_CS_PIN P0_21 // BSD2660 default + #define Z_CS_PIN P0_21 // BSD2660 default #endif -#define E0_STEP_PIN P2_00 -#define E0_DIR_PIN P0_05 -#define E0_ENABLE_PIN P0_04 +#define E0_STEP_PIN P2_00 +#define E0_DIR_PIN P0_05 +#define E0_ENABLE_PIN P0_04 #ifndef E0_CS_PIN - #define E0_CS_PIN P0_04 // BSD2660 default + #define E0_CS_PIN P0_04 // BSD2660 default #endif -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 #ifndef E1_CS_PIN - #define E1_CS_PIN P4_29 // BSD2660 default + #define E1_CS_PIN P4_29 // BSD2660 default #endif // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) -#define TEMP_0_PIN P0_24_A1 // A1 (TH2) -#define TEMP_1_PIN P0_25_A2 // A2 (TH3) - +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_1_PIN P0_25_A2 // A2 (TH3) // // Heaters / Fans // -#define HEATER_BED_PIN P2_07 -#define HEATER_0_PIN P2_04 -#define HEATER_1_PIN P2_05 +#define HEATER_BED_PIN P2_07 +#define HEATER_0_PIN P2_04 +#define HEATER_1_PIN P2_05 #ifndef FAN_PIN - #define FAN_PIN P0_26 + #define FAN_PIN P0_26 #endif -#define FAN1_PIN P1_22 +#define FAN1_PIN P1_22 // // Display // #if ANY(VIKI2, miniVIKI) - #define BEEPER_PIN P1_31 - #define DOGLCD_A0 P2_06 - #define DOGLCD_CS P0_16 + #define BEEPER_PIN P1_31 + #define DOGLCD_A0 P2_06 + #define DOGLCD_CS P0_16 - #define BTN_EN1 P3_25 - #define BTN_EN2 P3_26 - #define BTN_ENC P2_11 + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + #define BTN_ENC P2_11 - #define SD_DETECT_PIN P1_18 - #define SDSS P1_21 + #define SD_DETECT_PIN P1_18 + #define SDSS P1_21 - #define STAT_LED_RED_PIN P1_19 - #define STAT_LED_BLUE_PIN P1_20 + #define STAT_LED_RED_PIN P1_19 + #define STAT_LED_BLUE_PIN P1_20 #endif diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index 7559d6ad50..ba1351e6f4 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -37,74 +37,74 @@ // // LED // -#define LED_PIN P1_18 +#define LED_PIN P1_18 // // Servos // -#define SERVO0_PIN P1_29 +#define SERVO0_PIN P1_29 // // Limit Switches // -#define X_STOP_PIN P1_24 -#define Y_STOP_PIN P1_26 -#define Z_STOP_PIN P1_28 +#define X_STOP_PIN P1_24 +#define Y_STOP_PIN P1_26 +#define Z_STOP_PIN P1_28 #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN P2_04 + #define FIL_RUNOUT_PIN P2_04 #endif #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN P0_25_A2 // Analog Input (P0_25) + #define FILWIDTH_PIN P0_25_A2 // Analog Input (P0_25) #endif // // Steppers // -#define X_STEP_PIN P2_01 -#define X_DIR_PIN P0_11 -#define X_ENABLE_PIN P0_10 +#define X_STEP_PIN P2_01 +#define X_DIR_PIN P0_11 +#define X_ENABLE_PIN P0_10 -#define Y_STEP_PIN P2_02 -#define Y_DIR_PIN P0_20 -#define Y_ENABLE_PIN P0_19 +#define Y_STEP_PIN P2_02 +#define Y_DIR_PIN P0_20 +#define Y_ENABLE_PIN P0_19 -#define Z_STEP_PIN P2_03 -#define Z_DIR_PIN P0_22 -#define Z_ENABLE_PIN P0_21 +#define Z_STEP_PIN P2_03 +#define Z_DIR_PIN P0_22 +#define Z_ENABLE_PIN P0_21 -#define E0_STEP_PIN P2_00 -#define E0_DIR_PIN P0_05 -#define E0_ENABLE_PIN P0_04 +#define E0_STEP_PIN P2_00 +#define E0_DIR_PIN P0_05 +#define E0_ENABLE_PIN P0_04 // // DIGIPOT slave addresses // #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT #endif #ifndef DIGIPOT_I2C_ADDRESS_B - #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT #endif // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) -#define TEMP_0_PIN P0_24_A1 // A1 (TH2) +#define TEMP_BED_PIN P0_23_A0 // A0 (TH1) +#define TEMP_0_PIN P0_24_A1 // A1 (TH2) // // Heaters / Fans // -#define HEATER_BED_PIN P2_07 -#define HEATER_0_PIN P2_05 +#define HEATER_BED_PIN P2_07 +#define HEATER_0_PIN P2_05 #ifndef FAN_PIN - #define FAN_PIN P0_26 + #define FAN_PIN P0_26 #endif -#define FAN1_PIN P1_25 +#define FAN1_PIN P1_25 // // Display @@ -118,61 +118,61 @@ // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3. // Requires REVERSE_ENCODER_DIRECTION in Configuration.h - #define BEEPER_PIN P2_11 // J3-3 & AUX-4 + #define BEEPER_PIN P2_11 // J3-3 & AUX-4 - #define BTN_EN1 P0_16 // J3-7 & AUX-4 - #define BTN_EN2 P1_23 // J3-5 & AUX-4 - #define BTN_ENC P3_25 // J3-4 & AUX-4 + #define BTN_EN1 P0_16 // J3-7 & AUX-4 + #define BTN_EN2 P1_23 // J3-5 & AUX-4 + #define BTN_ENC P3_25 // J3-4 & AUX-4 - #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) - #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) - #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) + #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS) + #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) + #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) #else - #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 - #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 - #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 + #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4 + #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4 + #define BTN_ENC P2_11 // (35) J3-3 & AUX-4 - #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 - #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 - #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 - #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 - #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers - #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4 + #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4 + #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers + #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3 - #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 + #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 - #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 - #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 + #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3 + #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3 + #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3 #elif DISABLED(NEWPANEL) - //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 - //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 - //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 - //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 + //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4 + //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4 + //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4 + //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4 #endif #if ANY(VIKI2, miniVIKI) //#define LCD_SCREEN_ROT_180 - #define BEEPER_PIN P1_30 // (37) may change if cable changes - #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 - #define DOGLCD_SCK SCK_PIN - #define DOGLCD_MOSI MOSI_PIN + #define BEEPER_PIN P1_30 // (37) may change if cable changes + #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 + #define DOGLCD_SCK SCK_PIN + #define DOGLCD_MOSI MOSI_PIN - #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes - #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes + #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #else #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO - #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER - #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 + #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO + #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER + #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1 #endif - #define BEEPER_PIN P1_30 // (37) not 5V tolerant - #define DOGLCD_CS P0_16 // (16) + #define BEEPER_PIN P1_30 // (37) not 5V tolerant + #define DOGLCD_CS P0_16 // (16) #endif #if ENABLED(MINIPANEL) @@ -199,22 +199,22 @@ // SD Support // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) - #define SCK_PIN P0_15 - #define MISO_PIN P0_17 - #define MOSI_PIN P0_18 - #define SS_PIN P1_23 + #define SCK_PIN P0_15 + #define MISO_PIN P0_17 + #define MOSI_PIN P0_18 + #define SS_PIN P1_23 #elif SD_CONNECTION_IS(ONBOARD) #undef SD_DETECT_PIN - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h index 3556ff83f0..87d3cb459c 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -40,53 +40,53 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 -#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 -#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 -#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 -#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 // // Default pins for TMC software SPI // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 + #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 + #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 + #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 #endif #endif @@ -94,42 +94,42 @@ // Analog Inputs // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 // P0_23 -#define TEMP_BED_PIN P0_24_A1 // P0_24 +#define TEMP_0_PIN P0_23_A0 // P0_23 +#define TEMP_BED_PIN P0_24_A1 // P0_24 // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 // FET 1 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 // FET 1 #ifndef FAN_PIN - #define FAN_PIN P2_06 // FET 3 + #define FAN_PIN P2_06 // FET 3 #endif // // Auto fans // -#define AUTO_FAN_PIN P2_04 // FET 4 +#define AUTO_FAN_PIN P2_04 // FET 4 -#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN // // Misc. Functions // -#define LED_PIN P4_28 // Play LED +#define LED_PIN P4_28 // Play LED // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER #undef HEATER_0_PIN - #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 + #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 #undef HEATER_BED_PIN - #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET + #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET #undef FAN_PIN - #define SPINDLE_DIR_PIN P2_06 // FET 3 + #define SPINDLE_DIR_PIN P2_06 // FET 3 #endif // @@ -144,18 +144,18 @@ // #if HAS_SPI_LCD - #define BEEPER_PIN P0_27 // EXP2-7 - open drain + #define BEEPER_PIN P0_27 // EXP2-7 - open drain - #define BTN_EN1 P3_26 // EXP2-5 - #define BTN_EN2 P3_25 // EXP2-3 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-5 + #define BTN_EN2 P3_25 // EXP2-3 + #define BTN_ENC P1_30 // EXP1-2 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_SDSS P0_28 // EXP2-4 - #define LCD_PINS_ENABLE P0_18 // EXP1-3 - #define LCD_PINS_D4 P0_15 // EXP1-5 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_SDSS P0_28 // EXP2-4 + #define LCD_PINS_ENABLE P0_18 // EXP1-3 + #define LCD_PINS_D4 P0_15 // EXP1-5 - #define KILL_PIN P2_11 // EXP2-10 + #define KILL_PIN P2_11 // EXP2-10 #if ENABLED(SDSUPPORT) #error "SDSUPPORT is not currently supported by the Cohesion3D boards" @@ -166,13 +166,13 @@ // // Ethernet pins // -#define ENET_MDIO P1_17 -#define ENET_RX_ER P1_14 -#define ENET_RXD1 P1_10 -#define ENET_MOC P1_16 -#define REF_CLK P1_15 -#define ENET_RXD0 P1_09 -#define ENET_CRS P1_08 -#define ENET_TX_EN P1_04 -#define ENET_TXD0 P1_00 -#define ENET_TXD1 P1_01 +#define ENET_MDIO P1_17 +#define ENET_RX_ER P1_14 +#define ENET_RXD1 P1_10 +#define ENET_MOC P1_16 +#define REF_CLK P1_15 +#define ENET_RXD0 P1_09 +#define ENET_CRS P1_08 +#define ENET_TX_EN P1_04 +#define ENET_TXD0 P1_00 +#define ENET_TXD1 P1_01 diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h index 2502c76580..fa55a8adae 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h @@ -40,70 +40,70 @@ // // Servos // -#define SERVO0_PIN P2_04 +#define SERVO0_PIN P2_04 // // Limit Switches // -#define X_MIN_PIN P1_24 // 10k pullup to 3.3V -#define X_MAX_PIN P1_25 // 10k pullup to 3.3V -#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V -#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V -#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V -#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V +#define X_MIN_PIN P1_24 // 10k pullup to 3.3V +#define X_MAX_PIN P1_25 // 10k pullup to 3.3V +#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V +#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V +#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V +#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN P1_29 + #define Z_MIN_PROBE_PIN P1_29 #endif // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 -#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 +#define X_CS_PIN P1_10 // Ethernet Expansion - Pin 9 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 -#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 +#define Y_CS_PIN P1_09 // Ethernet Expansion - Pin 10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 -#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 +#define Z_CS_PIN P1_00 // Ethernet Expansion - Pin 11 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 -#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 +#define E0_CS_PIN P1_04 // Ethernet Expansion - Pin 12 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 -#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 +#define E1_CS_PIN P1_01 // Ethernet Expansion - Pin 14 -#define E2_STEP_PIN P1_20 -#define E2_DIR_PIN P1_19 -#define E2_ENABLE_PIN P1_21 -#define E2_CS_PIN P1_18 // FET 6 +#define E2_STEP_PIN P1_20 +#define E2_DIR_PIN P1_19 +#define E2_ENABLE_PIN P1_21 +#define E2_CS_PIN P1_18 // FET 6 // // Default pins for TMC software SPI // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 + #define TMC_SW_MOSI P1_16 // Ethernet Expansion - Pin 5 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 + #define TMC_SW_MISO P1_17 // Ethernet Expansion - Pin 6 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 + #define TMC_SW_SCK P1_08 // Ethernet Expansion - Pin 7 #endif #endif @@ -111,42 +111,42 @@ // Analog Inputs // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 -#define TEMP_BED_PIN P0_24_A1 -#define TEMP_1_PIN P0_25_A2 +#define TEMP_0_PIN P0_23_A0 +#define TEMP_BED_PIN P0_24_A1 +#define TEMP_1_PIN P0_25_A2 #if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILWIDTH_PIN P0_26_A3 + #define FILWIDTH_PIN P0_26_A3 #else - #define TEMP_2_PIN P0_26_A3 + #define TEMP_2_PIN P0_26_A3 #endif // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 // FET 1 -#define HEATER_1_PIN P1_23 // FET 2 -#define HEATER_2_PIN P1_22 // FET 3 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 // FET 1 +#define HEATER_1_PIN P1_23 // FET 2 +#define HEATER_2_PIN P1_22 // FET 3 #ifndef FAN_PIN - #define FAN_PIN P2_06 // FET 4 + #define FAN_PIN P2_06 // FET 4 #endif // // Auto fans // #if HOTENDS == 3 - #define AUTO_FAN_PIN P1_18 // FET 6 + #define AUTO_FAN_PIN P1_18 // FET 6 #else - #define AUTO_FAN_PIN P1_22 // FET 3 + #define AUTO_FAN_PIN P1_22 // FET 3 #endif -#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN // // Misc. Functions // -#define LED_PIN P4_28 // Play LED +#define LED_PIN P4_28 // Play LED // // M3/M4/M5 - Spindle/Laser Control @@ -155,9 +155,9 @@ #undef HEATER_0_PIN #undef HEATER_BED_PIN #undef FAN_PIN - #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 - #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET - #define SPINDLE_DIR_PIN P2_06 // FET 4 + #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 + #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET + #define SPINDLE_DIR_PIN P2_06 // FET 4 #endif // @@ -173,54 +173,54 @@ #if ENABLED(FYSETC_MINI_12864) - #define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3 + #define FORCE_SOFT_SPI // REQUIRED - results in LCD soft SPI mode 3 - #define BEEPER_PIN P1_31 // EXP1-1 - #define BTN_ENC P1_30 // EXP1-2 - #define DOGLCD_CS P0_18 // EXP1-3 - #define DOGLCD_A0 P0_16 // EXP1-4 - #define LCD_RESET_PIN P0_15 // EXP1-5 + #define BEEPER_PIN P1_31 // EXP1-1 + #define BTN_ENC P1_30 // EXP1-2 + #define DOGLCD_CS P0_18 // EXP1-3 + #define DOGLCD_A0 P0_16 // EXP1-4 + #define LCD_RESET_PIN P0_15 // EXP1-5 // A custom cable is REQUIRED for EXP2 cable because the SCK & MOSI on the card's EXP2 are dedicated // to the onboard SD card. All required EXP2 signals come from the Ethernet connector. Pin 1 of this // connector is the one nearest the motor power connector. - #define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left) - #define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left) - #define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left) - #define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left) + #define DOGLCD_SCK P1_17 // EXP2-2 => Ethernet pin 5 (bottom, 3 from left) + #define BTN_EN2 P1_09 // EXP2-3 => Ethernet pin 9 (bottom, 5 from left) + #define BTN_EN1 P1_04 // EXP2-5 => Ethernet pin 11 (bottom, 6 from left) + #define DOGLCD_MOSI P1_01 // EXP2-6 => Ethernet pin 13 (bottom, 7 from left) // A custom EXP1 cable is required colored LEDs. Pins 1-5, 9, 10 of the cable go to pins 1-5, 9, 10 // on the board's EXP1 connector. Pins 6, 7, and 8 of the EXP1 cable go to the Ethernet connector. // Rev 1.2 displays do NOT require the RGB LEDs. 2.0 and 2.1 displays do require RGB. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) + #define RGB_LED_R_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left) + #define RGB_LED_G_PIN P1_10 // EXP1-7 => Ethernet pin 10 (top row, 5 from left) #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left) + #define RGB_LED_B_PIN P1_00 // EXP1-8 => Ethernet pin 12 (top row, 6 from left) #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) + #define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) #endif #elif HAS_SPI_LCD - #define BEEPER_PIN P1_31 // EXP1-1 - //#define SD_DETECT_PIN P0_27 // EXP2-7 + #define BEEPER_PIN P1_31 // EXP1-1 + //#define SD_DETECT_PIN P0_27 // EXP2-7 - #define BTN_EN1 P3_26 // EXP2-5 - #define BTN_EN2 P3_25 // EXP2-3 - #define BTN_ENC P1_30 // EXP1-2 + #define BTN_EN1 P3_26 // EXP2-5 + #define BTN_EN2 P3_25 // EXP2-3 + #define BTN_ENC P1_30 // EXP1-2 - #define LCD_PINS_RS P0_16 // EXP1-4 - #define LCD_SDSS P0_28 // EXP2-4 - #define LCD_PINS_ENABLE P0_18 // EXP1-3 - #define LCD_PINS_D4 P0_15 // EXP1-5 + #define LCD_PINS_RS P0_16 // EXP1-4 + #define LCD_SDSS P0_28 // EXP2-4 + #define LCD_PINS_ENABLE P0_18 // EXP1-3 + #define LCD_PINS_D4 P0_15 // EXP1-5 - #define KILL_PIN P2_11 // EXP2-10 + #define KILL_PIN P2_11 // EXP2-10 #endif // HAS_SPI_LCD @@ -228,22 +228,22 @@ // SD Support // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card +#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #if SD_CONNECTION_IS(LCD) - #define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3 - #define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3 - #define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3 - #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin + #define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3 + #define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3 + #define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3 + #define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #elif SD_CONNECTION_IS(ONBOARD) #undef SD_DETECT_PIN - #define SCK_PIN P0_07 - #define MISO_PIN P0_08 - #define MOSI_PIN P0_09 - #define SS_PIN ONBOARD_SD_CS_PIN + #define SCK_PIN P0_07 + #define MISO_PIN P0_08 + #define MOSI_PIN P0_09 + #define SS_PIN ONBOARD_SD_CS_PIN #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif @@ -251,16 +251,16 @@ // // Ethernet pins // -//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left) -//#define ENET_RX_ER P1_14 -//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left) -//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left) -//#define REF_CLK P1_15 -//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left) -//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY -//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left) -//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left) -//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left) +//#define ENET_MDIO P1_17 // Ethernet pin 5 (bottom, 3 from left) +//#define ENET_RX_ER P1_14 +//#define ENET_RXD1 P1_10 // Ethernet pin 10 (top row, 5 from left) +//#define ENET_MOC P1_16 // Ethernet pin 6 (top row, 3 from left) +//#define REF_CLK P1_15 +//#define ENET_RXD0 P1_09 // Ethernet pin 9 (bottom, 5 from left) +//#define ENET_CRS P1_08 // Ethernet pin 8 (top row, 4 from left) - INPUT ONLY +//#define ENET_TX_EN P1_04 // Ethernet pin 11 (bottom, 6 from left) +//#define ENET_TXD0 P1_00 // Ethernet pin 12 (top row, 6 from left) +//#define ENET_TXD1 P1_01 // Ethernet pin 13 (bottom, 7 from left) /** * EXP1 pins diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h index 7a6d283fb4..fd98b5ef13 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h @@ -47,8 +47,8 @@ //#undef BTN_EN1 //#undef BTN_EN2 -//#define BTN_EN1 P1_23 // EXP2.5 -//#define BTN_EN2 P1_22 // EXP2.3 +//#define BTN_EN1 P1_23 // EXP2.5 +//#define BTN_EN2 P1_22 // EXP2.3 #if HAS_TMC_UART /** @@ -58,16 +58,16 @@ * In the worst case you may have to give up the LCD. * RX pins must be interrupt-capable. */ - #define X_SERIAL_TX_PIN P4_29 // J8-2 - #define X_SERIAL_RX_PIN P4_29 // J8-2 + #define X_SERIAL_TX_PIN P4_29 // J8-2 + #define X_SERIAL_RX_PIN P4_29 // J8-2 - #define Y_SERIAL_TX_PIN P2_08 // J8-3 - #define Y_SERIAL_RX_PIN P2_08 // J8-3 + #define Y_SERIAL_TX_PIN P2_08 // J8-3 + #define Y_SERIAL_RX_PIN P2_08 // J8-3 - #define Z_SERIAL_TX_PIN P2_11 // J8-4 - #define Z_SERIAL_RX_PIN P2_11 // J8-4 - #define E0_SERIAL_TX_PIN P2_13 // J8-5 - #define E0_SERIAL_RX_PIN P2_13 // J8-5 + #define Z_SERIAL_TX_PIN P2_11 // J8-4 + #define Z_SERIAL_RX_PIN P2_11 // J8-4 + #define E0_SERIAL_TX_PIN P2_13 // J8-5 + #define E0_SERIAL_RX_PIN P2_13 // J8-5 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index 3db8a99403..43db07ea5e 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -41,79 +41,79 @@ // // Servos // -#define SERVO0_PIN P1_23 +#define SERVO0_PIN P1_23 // // Limit Switches // -#define X_MIN_PIN P1_24 -#define X_MAX_PIN P1_25 -#define Y_MIN_PIN P1_26 -#define Y_MAX_PIN P1_27 -#define Z_MIN_PIN P1_28 -#define Z_MAX_PIN P1_29 +#define X_MIN_PIN P1_24 +#define X_MAX_PIN P1_25 +#define Y_MIN_PIN P1_26 +#define Y_MAX_PIN P1_27 +#define Z_MIN_PIN P1_28 +#define Z_MAX_PIN P1_29 // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P0_05 -#define X_ENABLE_PIN P0_04 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P0_05 +#define X_ENABLE_PIN P0_04 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P0_11 -#define Y_ENABLE_PIN P0_10 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P0_11 +#define Y_ENABLE_PIN P0_10 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P0_20 -#define Z_ENABLE_PIN P0_19 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P0_20 +#define Z_ENABLE_PIN P0_19 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P0_22 -#define E0_ENABLE_PIN P0_21 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P0_22 +#define E0_ENABLE_PIN P0_21 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 // // Temperature Sensors // 3.3V max when defined as an analog input // -#define TEMP_0_PIN P0_23_A0 // (T1) -#define TEMP_BED_PIN P0_24_A1 // (T2) -#define TEMP_1_PIN P0_25_A2 // (T3) -#define TEMP_2_PIN P0_26_A3 // (T4) +#define TEMP_0_PIN P0_23_A0 // (T1) +#define TEMP_BED_PIN P0_24_A1 // (T2) +#define TEMP_1_PIN P0_25_A2 // (T3) +#define TEMP_2_PIN P0_26_A3 // (T4) // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 -#define HEATER_1_PIN P1_23 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 +#define HEATER_1_PIN P1_23 #ifndef FAN_PIN - #define FAN_PIN P2_06 + #define FAN_PIN P2_06 #endif -#define FAN1_PIN P2_04 +#define FAN1_PIN P2_04 // // LCD / Controller // #if ANY(VIKI2, miniVIKI) - #define BEEPER_PIN P1_31 - #define DOGLCD_A0 P2_11 - #define DOGLCD_CS P0_16 + #define BEEPER_PIN P1_31 + #define DOGLCD_A0 P2_11 + #define DOGLCD_CS P0_16 - #define BTN_EN1 P3_25 - #define BTN_EN2 P3_26 - #define BTN_ENC P1_30 + #define BTN_EN1 P3_25 + #define BTN_EN2 P3_26 + #define BTN_ENC P1_30 - #define SD_DETECT_PIN P1_18 - #define SDSS P1_21 + #define SD_DETECT_PIN P1_18 + #define SDSS P1_21 - #define STAT_LED_RED_PIN P1_19 - #define STAT_LED_BLUE_PIN P1_20 + #define STAT_LED_RED_PIN P1_19 + #define STAT_LED_BLUE_PIN P1_20 #elif HAS_SPI_LCD diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index 9f28c2d94e..d4030ed790 100644 --- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -41,58 +41,58 @@ // // Servos // -#define SERVO0_PIN P2_04 +#define SERVO0_PIN P2_04 // // Limit Switches // -#define X_STOP_PIN P1_24 -#define Y_STOP_PIN P1_25 -#define Z_STOP_PIN P1_26 +#define X_STOP_PIN P1_24 +#define Y_STOP_PIN P1_25 +#define Z_STOP_PIN P1_26 // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN P1_27 + #define FIL_RUNOUT_PIN P1_27 #endif // // Steppers // -#define X_STEP_PIN P2_00 -#define X_DIR_PIN P1_16 -#define X_ENABLE_PIN P1_17 +#define X_STEP_PIN P2_00 +#define X_DIR_PIN P1_16 +#define X_ENABLE_PIN P1_17 -#define Y_STEP_PIN P2_01 -#define Y_DIR_PIN P1_10 -#define Y_ENABLE_PIN P1_09 +#define Y_STEP_PIN P2_01 +#define Y_DIR_PIN P1_10 +#define Y_ENABLE_PIN P1_09 -#define Z_STEP_PIN P2_02 -#define Z_DIR_PIN P1_15 -#define Z_ENABLE_PIN P1_14 +#define Z_STEP_PIN P2_02 +#define Z_DIR_PIN P1_15 +#define Z_ENABLE_PIN P1_14 -#define E0_STEP_PIN P2_03 -#define E0_DIR_PIN P1_04 -#define E0_ENABLE_PIN P1_08 +#define E0_STEP_PIN P2_03 +#define E0_DIR_PIN P1_04 +#define E0_ENABLE_PIN P1_08 -#define E1_STEP_PIN P2_08 -#define E1_DIR_PIN P2_13 -#define E1_ENABLE_PIN P4_29 +#define E1_STEP_PIN P2_08 +#define E1_DIR_PIN P2_13 +#define E1_ENABLE_PIN P4_29 #if HAS_TMC_UART // // TMC220x stepper drivers // Software serial // - #define X_SERIAL_TX_PIN P0_04 - #define X_SERIAL_RX_PIN P0_05 - #define Y_SERIAL_TX_PIN P0_10 - #define Y_SERIAL_RX_PIN P0_11 - #define Z_SERIAL_TX_PIN P0_19 - #define Z_SERIAL_RX_PIN P0_20 - #define E0_SERIAL_TX_PIN P0_22 - #define E0_SERIAL_RX_PIN P0_21 + #define X_SERIAL_TX_PIN P0_04 + #define X_SERIAL_RX_PIN P0_05 + #define Y_SERIAL_TX_PIN P0_10 + #define Y_SERIAL_RX_PIN P0_11 + #define Z_SERIAL_TX_PIN P0_19 + #define Z_SERIAL_RX_PIN P0_20 + #define E0_SERIAL_TX_PIN P0_22 + #define E0_SERIAL_RX_PIN P0_21 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -102,50 +102,50 @@ // Temp Sensors // 3.3V max when defined as an Analog Input! // -#if TEMP_SENSOR_0 == 20 // PT100 Adapter - #define TEMP_0_PIN P0_02_A7 // Analog Input +#if TEMP_SENSOR_0 == 20 // PT100 Adapter + #define TEMP_0_PIN P0_02_A7 // Analog Input #else - #define TEMP_0_PIN P0_23_A0 // Analog Input P0_23 + #define TEMP_0_PIN P0_23_A0 // Analog Input P0_23 #endif -#define TEMP_BED_PIN P0_24_A1 // Analog Input P0_24 -#define TEMP_1_PIN P0_25_A2 // Analog Input P0_25 +#define TEMP_BED_PIN P0_24_A1 // Analog Input P0_24 +#define TEMP_1_PIN P0_25_A2 // Analog Input P0_25 #if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILWIDTH_PIN P0_26_A3 // Analog Input P0_26 + #define FILWIDTH_PIN P0_26_A3 // Analog Input P0_26 #else - #define TEMP_2_PIN P0_26_A3 // Analog Input P0_26 + #define TEMP_2_PIN P0_26_A3 // Analog Input P0_26 #endif // // Heaters / Fans // -#define HEATER_BED_PIN P2_05 -#define HEATER_0_PIN P2_07 +#define HEATER_BED_PIN P2_05 +#define HEATER_0_PIN P2_07 #ifndef FAN_PIN - #define FAN_PIN P2_06 + #define FAN_PIN P2_06 #endif -#define FAN1_PIN P1_22 +#define FAN1_PIN P1_22 // // Auto fans // -#define AUTO_FAN_PIN P1_22 // FET 3 -#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN -#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN +#define AUTO_FAN_PIN P1_22 // FET 3 +#define ORIG_E0_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E1_AUTO_FAN_PIN AUTO_FAN_PIN +#define ORIG_E2_AUTO_FAN_PIN AUTO_FAN_PIN // // SD Card // -#define SDCARD_CONNECTION ONBOARD +#define SDCARD_CONNECTION ONBOARD -#define SCK_PIN P0_07 -#define MISO_PIN P0_08 -#define MOSI_PIN P0_09 -#define ONBOARD_SD_CS_PIN P0_06 -#define SS_PIN ONBOARD_SD_CS_PIN +#define SCK_PIN P0_07 +#define MISO_PIN P0_08 +#define MOSI_PIN P0_09 +#define ONBOARD_SD_CS_PIN P0_06 +#define SS_PIN ONBOARD_SD_CS_PIN // // LCD / Controller @@ -170,14 +170,14 @@ */ #if ENABLED(CR10_STOCKDISPLAY) - #define BEEPER_PIN P1_31 - #define BTN_EN1 P3_26 - #define BTN_EN2 P3_25 - #define BTN_ENC P1_30 - #define LCD_PINS_RS P0_16 - #define LCD_PINS_ENABLE P0_18 - #define LCD_PINS_D4 P0_15 - #define KILL_PIN P2_11 + #define BEEPER_PIN P1_31 + #define BTN_EN1 P3_26 + #define BTN_EN2 P3_25 + #define BTN_ENC P1_30 + #define LCD_PINS_RS P0_16 + #define LCD_PINS_ENABLE P0_18 + #define LCD_PINS_D4 P0_15 + #define KILL_PIN P2_11 #elif HAS_SPI_LCD #error "Only the CR10_STOCKDISPLAY is supported with TH3D EZBoard." #endif diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h index de064559af..7b0c0010a3 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONIC.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONIC.h @@ -33,46 +33,46 @@ // // Limit Switches // -#define X_STOP_PIN 3 -#define Y_STOP_PIN 2 -#define Z_STOP_PIN 5 +#define X_STOP_PIN 3 +#define Y_STOP_PIN 2 +#define Z_STOP_PIN 5 // // Steppers // -#define X_STEP_PIN 14 -#define X_DIR_PIN 15 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 14 +#define X_DIR_PIN 15 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 35 -#define Y_DIR_PIN 36 -#define Y_ENABLE_PIN 31 +#define Y_STEP_PIN 35 +#define Y_DIR_PIN 36 +#define Y_ENABLE_PIN 31 -#define Z_STEP_PIN 40 -#define Z_DIR_PIN 41 -#define Z_ENABLE_PIN 37 +#define Z_STEP_PIN 40 +#define Z_DIR_PIN 41 +#define Z_ENABLE_PIN 37 -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 25 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 25 -#define E1_STEP_PIN 33 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 // // Temperature sensors // -#define TEMP_0_PIN 15 // Analog Input -#define TEMP_1_PIN 14 // Analog Input -#define TEMP_BED_PIN 13 // Analog Input +#define TEMP_0_PIN 15 // Analog Input +#define TEMP_1_PIN 14 // Analog Input +#define TEMP_BED_PIN 13 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 19 // EXTRUDER 1 -#define HEATER_1_PIN 23 // EXTRUDER 2 -#define HEATER_BED_PIN 22 +#define HEATER_0_PIN 19 // EXTRUDER 1 +#define HEATER_1_PIN 23 // EXTRUDER 2 +#define HEATER_BED_PIN 22 // // LCD / Controller diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h index 5fd5bfdef1..d56d08c9e0 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h @@ -36,101 +36,101 @@ // // Limit Switches // -#define X_MIN_PIN 30 -#define X_MAX_PIN 31 -#define Y_MIN_PIN 32 -#define Y_MAX_PIN 33 -#define Z_MIN_PIN 34 -#define Z_MAX_PIN 35 +#define X_MIN_PIN 30 +#define X_MAX_PIN 31 +#define Y_MIN_PIN 32 +#define Y_MAX_PIN 33 +#define Z_MIN_PIN 34 +#define Z_MAX_PIN 35 // // Steppers // -#define X_STEP_PIN 17 -#define X_DIR_PIN 16 -#define X_ENABLE_PIN 48 +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 -#define Y_STEP_PIN 54 -#define Y_DIR_PIN 47 -#define Y_ENABLE_PIN 55 +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 -#define Z_STEP_PIN 57 -#define Z_DIR_PIN 56 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 -#define E0_STEP_PIN 23 -#define E0_DIR_PIN 22 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 22 +#define E0_ENABLE_PIN 24 -#define E1_STEP_PIN 26 -#define E1_DIR_PIN 25 -#define E1_ENABLE_PIN 27 +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 25 +#define E1_ENABLE_PIN 27 -#define E2_STEP_PIN 29 -#define E2_DIR_PIN 28 -#define E2_ENABLE_PIN 39 +#define E2_STEP_PIN 29 +#define E2_DIR_PIN 28 +#define E2_ENABLE_PIN 39 // // Temperature sensors // -#define TEMP_0_PIN 15 -#define TEMP_1_PIN 13 -#define TEMP_2_PIN 14 -#define TEMP_3_PIN 11 // should be used for chamber temperature control -#define TEMP_BED_PIN 12 +#define TEMP_0_PIN 15 +#define TEMP_1_PIN 13 +#define TEMP_2_PIN 14 +#define TEMP_3_PIN 11 // should be used for chamber temperature control +#define TEMP_BED_PIN 12 // // Heaters / Fans // -#define HEATER_0_PIN 6 -#define HEATER_1_PIN 7 -#define HEATER_2_PIN 8 -#define HEATER_BED_PIN 9 +#define HEATER_0_PIN 6 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 8 +#define HEATER_BED_PIN 9 #ifndef FAN_PIN - #define FAN_PIN 3 + #define FAN_PIN 3 #endif -#define FAN2_PIN 58 // additional fan or light control output +#define FAN2_PIN 58 // additional fan or light control output // // Other board specific pins // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 37 // board input labeled as F-DET + #define FIL_RUNOUT_PIN 37 // board input labeled as F-DET #endif -#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe) -#define LED_PIN 13 -#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too -#define EXT_2 5 // additional PWM pin 2 at JP1 connector -#define EXT_3 2 // additional PWM pin 3 at JP1 connector -#define PS_ON_PIN 45 -#define KILL_PIN 46 +#define Z_MIN_PROBE_PIN 36 // additional external board input labeled as E-SENS (should be used for Z-probe) +#define LED_PIN 13 +#define SPINDLE_ENABLE_PIN 4 // additional PWM pin 1 at JP1 connector - should be used for laser control too +#define EXT_2 5 // additional PWM pin 2 at JP1 connector +#define EXT_3 2 // additional PWM pin 3 at JP1 connector +#define PS_ON_PIN 45 +#define KILL_PIN 46 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 11 // shared with TEMP_3 analog input + #define FILWIDTH_PIN 11 // shared with TEMP_3 analog input #endif // // LCD / Controller // -#define LCD_PINS_RS 19 -#define LCD_PINS_ENABLE 42 -#define LCD_PINS_D4 18 -#define LCD_PINS_D5 38 -#define LCD_PINS_D6 41 -#define LCD_PINS_D7 40 +#define LCD_PINS_RS 19 +#define LCD_PINS_ENABLE 42 +#define LCD_PINS_D4 18 +#define LCD_PINS_D5 38 +#define LCD_PINS_D6 41 +#define LCD_PINS_D7 40 // // Beeper, SD Card, Encoder // -#define BEEPER_PIN 44 +#define BEEPER_PIN 44 #if ENABLED(SDSUPPORT) - #define SDSS 53 - #define SD_DETECT_PIN 49 + #define SDSS 53 + #define SD_DETECT_PIN 49 #endif #if ENABLED(NEWPANEL) - #define BTN_EN1 11 - #define BTN_EN2 12 - #define BTN_ENC 43 + #define BTN_EN1 11 + #define BTN_EN2 12 + #define BTN_ENC 43 #endif diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h index 047dc8ef5a..833499fe0f 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h @@ -34,115 +34,115 @@ // // Limit Switches // -#define X_STOP_PIN 43 -#define Y_STOP_PIN 45 -#define Z_STOP_PIN 42 +#define X_STOP_PIN 43 +#define Y_STOP_PIN 45 +#define Z_STOP_PIN 42 // // Steppers // -#define X_STEP_PIN 34 -#define X_DIR_PIN 36 -#define X_ENABLE_PIN 35 +#define X_STEP_PIN 34 +#define X_DIR_PIN 36 +#define X_ENABLE_PIN 35 -#define Y_STEP_PIN 37 -#define Y_DIR_PIN 39 -#define Y_ENABLE_PIN 38 +#define Y_STEP_PIN 37 +#define Y_DIR_PIN 39 +#define Y_ENABLE_PIN 38 -#define Z_STEP_PIN 40 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 41 +#define Z_STEP_PIN 40 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 41 -#define E0_STEP_PIN 29 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 3 +#define E0_STEP_PIN 29 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 3 -#define E1_STEP_PIN 61 -#define E1_DIR_PIN 62 -#define E1_ENABLE_PIN 60 +#define E1_STEP_PIN 61 +#define E1_DIR_PIN 62 +#define E1_ENABLE_PIN 60 -#define E2_STEP_PIN 15 -#define E2_DIR_PIN 14 -#define E2_ENABLE_PIN 16 +#define E2_STEP_PIN 15 +#define E2_DIR_PIN 14 +#define E2_ENABLE_PIN 16 -#define E3_STEP_PIN 44 -#define E3_DIR_PIN 49 -#define E3_ENABLE_PIN 47 +#define E3_STEP_PIN 44 +#define E3_DIR_PIN 49 +#define E3_ENABLE_PIN 47 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 3 // Analog Input. 3 for tool2 -> 2 for chambertemp -#define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp -#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp -#define TEMP_BED_PIN 1 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 3 // Analog Input. 3 for tool2 -> 2 for chambertemp +#define TEMP_2_PIN 2 // Analog Input. 9 for tool3 -> 2 for chambertemp +#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 2 for chambertemp +#define TEMP_BED_PIN 1 // Analog Input #ifndef TEMP_CHAMBER_PIN - //#define TEMP_CHAMBER_PIN 2 // Analog Input + //#define TEMP_CHAMBER_PIN 2 // Analog Input #endif // // Heaters / Fans // -#define HEATER_0_PIN 5 -#define HEATER_1_PIN 58 -#define HEATER_2_PIN 64 -#define HEATER_3_PIN 46 -#define HEATER_BED_PIN 2 +#define HEATER_0_PIN 5 +#define HEATER_1_PIN 58 +#define HEATER_2_PIN 64 +#define HEATER_3_PIN 46 +#define HEATER_BED_PIN 2 #ifndef FAN_PIN - //#define FAN_PIN 7 // common PWM pin for all tools + //#define FAN_PIN 7 // common PWM pin for all tools #endif -#define ORIG_E0_AUTO_FAN_PIN 7 -#define ORIG_E1_AUTO_FAN_PIN 7 -#define ORIG_E2_AUTO_FAN_PIN 7 -#define ORIG_E3_AUTO_FAN_PIN 7 +#define ORIG_E0_AUTO_FAN_PIN 7 +#define ORIG_E1_AUTO_FAN_PIN 7 +#define ORIG_E2_AUTO_FAN_PIN 7 +#define ORIG_E3_AUTO_FAN_PIN 7 // // Misc. Functions // -#define SDSS 53 -#define SD_DETECT_PIN 13 +#define SDSS 53 +#define SD_DETECT_PIN 13 // Tools -//#define TOOL_0_PIN 4 -//#define TOOL_1_PIN 59 -//#define TOOL_2_PIN 8 -//#define TOOL_3_PIN 30 -//#define TOOL_PWM_PIN 7 // common PWM pin for all tools +//#define TOOL_0_PIN 4 +//#define TOOL_1_PIN 59 +//#define TOOL_2_PIN 8 +//#define TOOL_3_PIN 30 +//#define TOOL_PWM_PIN 7 // common PWM pin for all tools // Common I/O -//#define FIL_RUNOUT_PIN -1 -//#define PWM_1_PIN 11 -//#define PWM_2_PIN 10 -//#define SPARE_IO 12 +//#define FIL_RUNOUT_PIN -1 +//#define PWM_1_PIN 11 +//#define PWM_2_PIN 10 +//#define SPARE_IO 12 // // LCD / Controller // -#define BEEPER_PIN 6 +#define BEEPER_PIN 6 // Pins for DOGM SPI LCD Support -#define DOGLCD_A0 26 -#define DOGLCD_CS 24 -#define DOGLCD_MOSI -1 -#define DOGLCD_SCK -1 +#define DOGLCD_A0 26 +#define DOGLCD_CS 24 +#define DOGLCD_MOSI -1 +#define DOGLCD_SCK -1 -#define BTN_EN1 23 -#define BTN_EN2 25 -#define BTN_ENC 27 +#define BTN_EN1 23 +#define BTN_EN2 25 +#define BTN_ENC 27 // Hardware buttons for manual movement of XYZ -#define SHIFT_OUT 19 -#define SHIFT_LD 18 -#define SHIFT_CLK 17 +#define SHIFT_OUT 19 +#define SHIFT_LD 18 +#define SHIFT_CLK 17 -//#define UI1 31 -//#define UI2 22 +//#define UI1 31 +//#define UI2 22 -#define STAT_LED_BLUE_PIN -1 -#define STAT_LED_RED_PIN 31 +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 31 diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h index 246a5964f0..680a5c9a99 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h @@ -34,122 +34,122 @@ // // Limit Switches // -#define X_STOP_PIN 19 -#define Y_STOP_PIN 22 -#define Z_STOP_PIN 23 +#define X_STOP_PIN 19 +#define Y_STOP_PIN 22 +#define Z_STOP_PIN 23 // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 27 -#define X_ENABLE_PIN 26 +#define X_STEP_PIN 25 +#define X_DIR_PIN 27 +#define X_ENABLE_PIN 26 -#define Y_STEP_PIN 28 -#define Y_DIR_PIN 30 -#define Y_ENABLE_PIN 29 +#define Y_STEP_PIN 28 +#define Y_DIR_PIN 30 +#define Y_ENABLE_PIN 29 -#define Z_STEP_PIN 31 -#define Z_DIR_PIN 33 -#define Z_ENABLE_PIN 32 +#define Z_STEP_PIN 31 +#define Z_DIR_PIN 33 +#define Z_ENABLE_PIN 32 -#define E0_STEP_PIN 57 -#define E0_DIR_PIN 55 -#define E0_ENABLE_PIN 58 +#define E0_STEP_PIN 57 +#define E0_DIR_PIN 55 +#define E0_ENABLE_PIN 58 -#define E1_STEP_PIN 61 -#define E1_DIR_PIN 62 -#define E1_ENABLE_PIN 60 +#define E1_STEP_PIN 61 +#define E1_DIR_PIN 62 +#define E1_ENABLE_PIN 60 -#define E2_STEP_PIN 46 -#define E2_DIR_PIN 66 -#define E2_ENABLE_PIN 44 +#define E2_STEP_PIN 46 +#define E2_DIR_PIN 66 +#define E2_ENABLE_PIN 44 -#define E3_STEP_PIN 45 -#define E3_DIR_PIN 69 -#define E3_ENABLE_PIN 47 +#define E3_STEP_PIN 45 +#define E3_DIR_PIN 69 +#define E3_ENABLE_PIN 47 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp -#define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp -#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp -#define TEMP_BED_PIN 14 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 9 // Analog Input. 9 for tool2 -> 13 for chambertemp +#define TEMP_2_PIN 13 // Analog Input. 10 for tool3 -> 13 for chambertemp +#define TEMP_3_PIN 11 // Analog Input. 11 for tool4 -> 13 for chambertemp +#define TEMP_BED_PIN 14 // Analog Input #ifndef TEMP_CHAMBER_PIN - //#define TEMP_CHAMBER_PIN 13 // Analog Input + //#define TEMP_CHAMBER_PIN 13 // Analog Input #endif // // Heaters / Fans // -#define HEATER_0_PIN 11 -#define HEATER_1_PIN 9 -#define HEATER_2_PIN 6 -#define HEATER_3_PIN 3 -#define HEATER_BED_PIN 24 +#define HEATER_0_PIN 11 +#define HEATER_1_PIN 9 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 3 +#define HEATER_BED_PIN 24 #ifndef FAN_PIN - #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools + #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools #endif -#define ORIG_E0_AUTO_FAN_PIN 7 -#define ORIG_E1_AUTO_FAN_PIN 7 -#define ORIG_E2_AUTO_FAN_PIN 7 -#define ORIG_E3_AUTO_FAN_PIN 7 +#define ORIG_E0_AUTO_FAN_PIN 7 +#define ORIG_E1_AUTO_FAN_PIN 7 +#define ORIG_E2_AUTO_FAN_PIN 7 +#define ORIG_E3_AUTO_FAN_PIN 7 // // Misc. Functions // -#define SDSS 53 -#define SD_DETECT_PIN 15 +#define SDSS 53 +#define SD_DETECT_PIN 15 // Tools -//#define TOOL_0_PIN 56 -//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder -//#define TOOL_1_PIN 59 -//#define TOOL_1_PWM_PIN 8 // lights at dual extruder -//#define TOOL_2_PIN 4 -//#define TOOL_2_PWM_PIN 5 -//#define TOOL_3_PIN 14 -//#define TOOL_3_PWM_PIN 2 +//#define TOOL_0_PIN 56 +//#define TOOL_0_PWM_PIN 10 // red warning led at dual extruder +//#define TOOL_1_PIN 59 +//#define TOOL_1_PWM_PIN 8 // lights at dual extruder +//#define TOOL_2_PIN 4 +//#define TOOL_2_PWM_PIN 5 +//#define TOOL_3_PIN 14 +//#define TOOL_3_PWM_PIN 2 // Common I/O #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 18 + #define FIL_RUNOUT_PIN 18 #endif -//#define PWM_1_PIN 12 -//#define PWM_2_PIN 13 -//#define SPARE_IO 17 +//#define PWM_1_PIN 12 +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 // // LCD / Controller // -#define BEEPER_PIN 16 +#define BEEPER_PIN 16 // Pins for DOGM SPI LCD Support -#define DOGLCD_A0 39 -#define DOGLCD_CS 35 -#define DOGLCD_MOSI 48 -#define DOGLCD_SCK 49 +#define DOGLCD_A0 39 +#define DOGLCD_CS 35 +#define DOGLCD_MOSI 48 +#define DOGLCD_SCK 49 #define LCD_SCREEN_ROT_180 // The encoder and click button -#define BTN_EN1 36 -#define BTN_EN2 34 -#define BTN_ENC 38 +#define BTN_EN1 36 +#define BTN_EN2 34 +#define BTN_ENC 38 // Hardware buttons for manual movement of XYZ -#define SHIFT_OUT 42 -#define SHIFT_LD 41 -#define SHIFT_CLK 40 +#define SHIFT_OUT 42 +#define SHIFT_LD 41 +#define SHIFT_CLK 40 -//#define UI1 43 -//#define UI2 37 +//#define UI1 43 +//#define UI2 37 -#define STAT_LED_BLUE_PIN -1 -#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 10 // TOOL_0_PWM_PIN diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h index bf7d65f7e7..b4aa8ab815 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h @@ -34,79 +34,79 @@ // // Servos // -#define SERVO0_PIN 6 +#define SERVO0_PIN 6 // // Limit Switches // -#define X_STOP_PIN 34 -#define Y_STOP_PIN 39 -#define Z_STOP_PIN 62 +#define X_STOP_PIN 34 +#define Y_STOP_PIN 39 +#define Z_STOP_PIN 62 #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 49 + #define Z_MIN_PROBE_PIN 49 #endif // // Steppers // -#define X_STEP_PIN 14 -#define X_DIR_PIN 25 -#define X_ENABLE_PIN 26 +#define X_STEP_PIN 14 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 26 -#define Y_STEP_PIN 11 -#define Y_DIR_PIN 12 -#define Y_ENABLE_PIN 15 +#define Y_STEP_PIN 11 +#define Y_DIR_PIN 12 +#define Y_ENABLE_PIN 15 -#define Z_STEP_PIN 24 -#define Z_DIR_PIN 27 -#define Z_ENABLE_PIN 28 +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 27 +#define Z_ENABLE_PIN 28 -#define E0_STEP_PIN 64 -#define E0_DIR_PIN 65 -#define E0_ENABLE_PIN 63 +#define E0_STEP_PIN 64 +#define E0_DIR_PIN 65 +#define E0_ENABLE_PIN 63 // // Temperature Sensors // Analog Inputs // -#define TEMP_0_PIN 2 // Analog Input -#define TEMP_BED_PIN 4 // Analog Input +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 4 // Analog Input #ifndef TEMP_CHAMBER_PIN - #define TEMP_CHAMBER_PIN 5 // Analog Input + #define TEMP_CHAMBER_PIN 5 // Analog Input #endif // // Heaters // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 32 -#define HEATER_CHAMBER_PIN 33 +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 32 +#define HEATER_CHAMBER_PIN 33 // // Fans // -#define FAN_PIN 8 -#define ORIG_E0_AUTO_FAN_PIN 30 -#define ORIG_E1_AUTO_FAN_PIN 30 -#define ORIG_E2_AUTO_FAN_PIN 30 -#define ORIG_E3_AUTO_FAN_PIN 30 -//#define ORIG_CHAMBER_AUTO_FAN_PIN 10 +#define FAN_PIN 8 +#define ORIG_E0_AUTO_FAN_PIN 30 +#define ORIG_E1_AUTO_FAN_PIN 30 +#define ORIG_E2_AUTO_FAN_PIN 30 +#define ORIG_E3_AUTO_FAN_PIN 30 +//#define ORIG_CHAMBER_AUTO_FAN_PIN 10 // // Misc. Functions // -#define SDSS 53 -#define SD_DETECT_PIN 40 +#define SDSS 53 +#define SD_DETECT_PIN 40 // Common I/O -#define FIL_RUNOUT_PIN 9 -//#define FIL_RUNOUT_PIN 29 // encoder sensor -//#define PWM_1_PIN 12 -//#define PWM_2_PIN 13 -//#define SPARE_IO 17 -#define BEEPER_PIN 13 -#define STAT_LED_BLUE_PIN -1 -#define STAT_LED_RED_PIN 10 // 31 +#define FIL_RUNOUT_PIN 9 +//#define FIL_RUNOUT_PIN 29 // encoder sensor +//#define PWM_1_PIN 12 +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 +#define BEEPER_PIN 13 +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 10 // 31 diff --git a/Marlin/src/pins/mega/pins_EINSTART-S.h b/Marlin/src/pins/mega/pins_EINSTART-S.h index 45b500363e..8bb8f081f5 100644 --- a/Marlin/src/pins/mega/pins_EINSTART-S.h +++ b/Marlin/src/pins/mega/pins_EINSTART-S.h @@ -35,48 +35,48 @@ // // Limit Switches // -#define X_STOP_PIN 44 -#define Y_STOP_PIN 43 -#define Z_STOP_PIN 42 +#define X_STOP_PIN 44 +#define Y_STOP_PIN 43 +#define Z_STOP_PIN 42 // // Steppers // -#define X_STEP_PIN 76 -#define X_DIR_PIN 75 -#define X_ENABLE_PIN 73 +#define X_STEP_PIN 76 +#define X_DIR_PIN 75 +#define X_ENABLE_PIN 73 -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 32 -#define Y_ENABLE_PIN 72 +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 32 +#define Y_ENABLE_PIN 72 -#define Z_STEP_PIN 34 -#define Z_DIR_PIN 35 -#define Z_ENABLE_PIN 33 +#define Z_STEP_PIN 34 +#define Z_DIR_PIN 35 +#define Z_ENABLE_PIN 33 -#define E0_STEP_PIN 36 -#define E0_DIR_PIN 37 -#define E0_ENABLE_PIN 30 +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 37 +#define E0_ENABLE_PIN 30 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_BED_PIN 1 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 83 -#define HEATER_BED_PIN 38 +#define HEATER_0_PIN 83 +#define HEATER_BED_PIN 38 -#define FAN_PIN 82 +#define FAN_PIN 82 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 4 +#define SDSS 53 +#define LED_PIN 4 ////////////////////////// // LCDs and Controllers // @@ -90,24 +90,24 @@ // u8glib constructor // U8GLIB_SH1106_128X64 u8g(DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS); -#define LCD_PINS_DC 78 -#define LCD_PINS_RS 79 +#define LCD_PINS_DC 78 +#define LCD_PINS_RS 79 // DOGM SPI LCD Support -#define DOGLCD_CS 3 -#define DOGLCD_MOSI 2 -#define DOGLCD_SCK 5 -#define DOGLCD_A0 2 +#define DOGLCD_CS 3 +#define DOGLCD_MOSI 2 +#define DOGLCD_SCK 5 +#define DOGLCD_A0 2 // // LCD Display input pins // -#define BTN_UP 25 -#define BTN_DWN 26 -#define BTN_LFT 27 -#define BTN_RT 28 +#define BTN_UP 25 +#define BTN_DWN 26 +#define BTN_LFT 27 +#define BTN_RT 28 // 'OK' button -#define BTN_ENC 29 +#define BTN_ENC 29 // Set Kill to right arrow, same as RIGID_PANEL -#define KILL_PIN 28 +#define KILL_PIN 28 diff --git a/Marlin/src/pins/mega/pins_ELEFU_3.h b/Marlin/src/pins/mega/pins_ELEFU_3.h index 30b4ab40af..3d35a72b19 100644 --- a/Marlin/src/pins/mega/pins_ELEFU_3.h +++ b/Marlin/src/pins/mega/pins_ELEFU_3.h @@ -34,115 +34,115 @@ // // Limit Switches // -#define X_MIN_PIN 35 -#define X_MAX_PIN 34 -#define Y_MIN_PIN 33 -#define Y_MAX_PIN 32 -#define Z_MIN_PIN 31 -#define Z_MAX_PIN 30 +#define X_MIN_PIN 35 +#define X_MAX_PIN 34 +#define Y_MIN_PIN 33 +#define Y_MAX_PIN 32 +#define Z_MIN_PIN 31 +#define Z_MAX_PIN 30 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 30 + #define Z_MIN_PROBE_PIN 30 #endif // // Steppers // -#define X_STEP_PIN 49 -#define X_DIR_PIN 13 -#define X_ENABLE_PIN 48 +#define X_STEP_PIN 49 +#define X_DIR_PIN 13 +#define X_ENABLE_PIN 48 -#define Y_STEP_PIN 11 -#define Y_DIR_PIN 9 -#define Y_ENABLE_PIN 12 +#define Y_STEP_PIN 11 +#define Y_DIR_PIN 9 +#define Y_ENABLE_PIN 12 -#define Z_STEP_PIN 7 -#define Z_DIR_PIN 6 -#define Z_ENABLE_PIN 8 +#define Z_STEP_PIN 7 +#define Z_DIR_PIN 6 +#define Z_ENABLE_PIN 8 -#define E0_STEP_PIN 40 -#define E0_DIR_PIN 41 -#define E0_ENABLE_PIN 37 +#define E0_STEP_PIN 40 +#define E0_DIR_PIN 41 +#define E0_ENABLE_PIN 37 -#define E1_STEP_PIN 18 -#define E1_DIR_PIN 19 -#define E1_ENABLE_PIN 38 +#define E1_STEP_PIN 18 +#define E1_DIR_PIN 19 +#define E1_ENABLE_PIN 38 -#define E2_STEP_PIN 43 -#define E2_DIR_PIN 47 -#define E2_ENABLE_PIN 42 +#define E2_STEP_PIN 43 +#define E2_DIR_PIN 47 +#define E2_ENABLE_PIN 42 // // Temperature Sensors // -#define TEMP_0_PIN 3 // Analog Input -#define TEMP_1_PIN 2 // Analog Input -#define TEMP_2_PIN 1 // Analog Input -#define TEMP_BED_PIN 0 // Analog Input +#define TEMP_0_PIN 3 // Analog Input +#define TEMP_1_PIN 2 // Analog Input +#define TEMP_2_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 45 // 12V PWM1 -#define HEATER_1_PIN 46 // 12V PWM2 -#define HEATER_2_PIN 17 // 12V PWM3 -#define HEATER_BED_PIN 44 // DOUBLE 12V PWM +#define HEATER_0_PIN 45 // 12V PWM1 +#define HEATER_1_PIN 46 // 12V PWM2 +#define HEATER_2_PIN 17 // 12V PWM3 +#define HEATER_BED_PIN 44 // DOUBLE 12V PWM #ifndef FAN_PIN - #define FAN_PIN 16 // 5V PWM + #define FAN_PIN 16 // 5V PWM #endif // // Misc. Functions // -#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector -#define SLEEP_WAKE_PIN 26 // This feature still needs work -#define PHOTOGRAPH_PIN 29 +#define PS_ON_PIN 10 // Set to -1 if using a manual switch on the PWRSW Connector +#define SLEEP_WAKE_PIN 26 // This feature still needs work +#define PHOTOGRAPH_PIN 29 // // LCD / Controller // -#define BEEPER_PIN 36 +#define BEEPER_PIN 36 #if ENABLED(RA_CONTROL_PANEL) - #define SDSS 53 - #define SD_DETECT_PIN 28 + #define SDSS 53 + #define SD_DETECT_PIN 28 - #define BTN_EN1 14 - #define BTN_EN2 39 - #define BTN_ENC 15 + #define BTN_EN1 14 + #define BTN_EN2 39 + #define BTN_ENC 15 #endif // RA_CONTROL_PANEL #if ENABLED(RA_DISCO) // variables for which pins the TLC5947 is using - #define TLC_CLOCK_PIN 25 - #define TLC_BLANK_PIN 23 - #define TLC_XLAT_PIN 22 - #define TLC_DATA_PIN 24 + #define TLC_CLOCK_PIN 25 + #define TLC_BLANK_PIN 23 + #define TLC_XLAT_PIN 22 + #define TLC_DATA_PIN 24 // We also need to define pin to port number mapping for the 2560 to match the pins listed above. // If you change the TLC pins, update this as well per the 2560 datasheet! This currently only works with the RA Board. - #define TLC_CLOCK_BIT 3 + #define TLC_CLOCK_BIT 3 #define TLC_CLOCK_PORT &PORTA - #define TLC_BLANK_BIT 1 + #define TLC_BLANK_BIT 1 #define TLC_BLANK_PORT &PORTA - #define TLC_DATA_BIT 2 + #define TLC_DATA_BIT 2 #define TLC_DATA_PORT &PORTA - #define TLC_XLAT_BIT 0 + #define TLC_XLAT_BIT 0 #define TLC_XLAT_PORT &PORTA // Change this to match your situation. Lots of TLCs takes up the arduino SRAM very quickly, so be careful // Leave it at at least 1 if you have enabled RA_LIGHTING // The number of TLC5947 boards chained together for use with the animation, additional ones will repeat the animation on them, but are not individually addressable and mimic those before them. You can leave the default at 2 even if you only have 1 TLC5947 module. - #define NUM_TLCS 2 + #define NUM_TLCS 2 // These TRANS_ARRAY values let you change the order the LEDs on the lighting modules will animate for chase functions. // Modify them according to your specific situation. diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index 6590f06d6c..e111f2ce44 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -39,102 +39,102 @@ // // Limit Switches // -#define X_MIN_PIN 22 -#define X_MAX_PIN 24 -#define Y_MIN_PIN 26 -#define Y_MAX_PIN 28 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 32 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 27 +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 29 +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 -#define Z_STEP_PIN 37 -#define Z_DIR_PIN 39 -#define Z_ENABLE_PIN 35 +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 -#define E0_STEP_PIN 43 -#define E0_DIR_PIN 45 -#define E0_ENABLE_PIN 41 +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 -#define E1_STEP_PIN 49 -#define E1_DIR_PIN 47 -#define E1_ENABLE_PIN 48 +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 // // Temperature Sensors // -#define TEMP_0_PIN 8 -#define TEMP_1_PIN 9 -#define TEMP_BED_PIN 10 +#define TEMP_0_PIN 8 +#define TEMP_1_PIN 9 +#define TEMP_BED_PIN 10 // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 7 + #define FAN_PIN 7 #endif // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 12 -#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing -#define KILL_PIN -1 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing +#define KILL_PIN -1 #if HAS_SPI_LCD - #define BEEPER_PIN 18 + #define BEEPER_PIN 18 #if ENABLED(NEWPANEL) #if ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 5 - #define DOGLCD_CS 21 - #define BTN_EN1 40 - #define BTN_EN2 42 + #define DOGLCD_A0 5 + #define DOGLCD_CS 21 + #define BTN_EN1 40 + #define BTN_EN2 42 #else - #define LCD_PINS_RS 20 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 16 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 - #define BTN_EN1 42 - #define BTN_EN2 40 + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 + #define BTN_EN1 42 + #define BTN_EN2 40 #endif - #define BTN_ENC 19 - #define SD_DETECT_PIN 38 + #define BTN_ENC 19 + #define SD_DETECT_PIN 38 - #else // !NEWPANEL + #else // !NEWPANEL - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 6 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 20 - #define LCD_PINS_D7 19 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 - #define SD_DETECT_PIN -1 + #define SD_DETECT_PIN -1 #endif // !NEWPANEL diff --git a/Marlin/src/pins/mega/pins_GT2560_V3.h b/Marlin/src/pins/mega/pins_GT2560_V3.h index 566e88705d..08f9018a29 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3.h @@ -36,33 +36,33 @@ // // Servos // -#define SERVO0_PIN 11 //13 untested 3Dtouch +#define SERVO0_PIN 11 //13 untested 3Dtouch // // Limit Switches // #ifndef X_STOP_PIN #ifndef X_MIN_PIN - #define X_MIN_PIN 24 + #define X_MIN_PIN 24 #endif #ifndef X_MAX_PIN - #define X_MAX_PIN 22 + #define X_MAX_PIN 22 #endif #endif #ifndef Y_STOP_PIN #ifndef Y_MIN_PIN - #define Y_MIN_PIN 28 + #define Y_MIN_PIN 28 #endif #ifndef Y_MAX_PIN - #define Y_MAX_PIN 26 + #define Y_MAX_PIN 26 #endif #endif #ifndef Z_STOP_PIN #ifndef Z_MIN_PIN - #define Z_MIN_PIN 30 + #define Z_MIN_PIN 30 #endif #ifndef Z_MAX_PIN - #define Z_MAX_PIN 32 + #define Z_MAX_PIN 32 #endif #endif @@ -70,116 +70,116 @@ // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 66 + #define FIL_RUNOUT_PIN 66 #endif #ifndef FIL_RUNOUT2_PIN - #define FIL_RUNOUT2_PIN 67 + #define FIL_RUNOUT2_PIN 67 #endif // // Power Recovery // -#define POWER_LOSS_PIN 69 // Pin to detect power loss -#define POWER_LOSS_STATE LOW +#define POWER_LOSS_PIN 69 // Pin to detect power loss +#define POWER_LOSS_STATE LOW // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 39 -#define X_ENABLE_PIN 35 +#define X_STEP_PIN 37 +#define X_DIR_PIN 39 +#define X_ENABLE_PIN 35 -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 29 +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 -#define Z_STEP_PIN 25 -#define Z_DIR_PIN 23 -#define Z_ENABLE_PIN 27 +#define Z_STEP_PIN 25 +#define Z_DIR_PIN 23 +#define Z_ENABLE_PIN 27 -#define E0_STEP_PIN 46 -#define E0_DIR_PIN 44 -#define E0_ENABLE_PIN 12 +#define E0_STEP_PIN 46 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 12 -#define E1_STEP_PIN 49 -#define E1_DIR_PIN 47 -#define E1_ENABLE_PIN 48 +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 -#define E2_STEP_PIN 43 -#define E2_DIR_PIN 45 -#define E2_ENABLE_PIN 41 +#define E2_STEP_PIN 43 +#define E2_DIR_PIN 45 +#define E2_ENABLE_PIN 41 // // Temperature Sensors // -#define TEMP_0_PIN 11 // Analog Input -#define TEMP_1_PIN 9 // Analog Input -#define TEMP_2_PIN 1 // Analog Input -#define TEMP_BED_PIN 10 // Analog Input +#define TEMP_0_PIN 11 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_2_PIN 1 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 3 -#define HEATER_2_PIN 1 -#define HEATER_BED_PIN 4 -#define FAN_PIN 9 -#define FAN1_PIN 8 -#define FAN2_PIN 7 +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 1 +#define HEATER_BED_PIN 4 +#define FAN_PIN 9 +#define FAN1_PIN 8 +#define FAN2_PIN 7 // // Misc. Functions // -#define SD_DETECT_PIN 38 -#define SDSS 53 -#define LED_PIN 6 -#define PS_ON_PIN 12 -#define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing +#define SD_DETECT_PIN 38 +#define SDSS 53 +#define LED_PIN 6 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 // This pin must be enabled at boot to keep power flowing #ifndef CASE_LIGHT_PIN - #define CASE_LIGHT_PIN 6 // 21 + #define CASE_LIGHT_PIN 6 // 21 #endif // // LCD Controller // -#define BEEPER_PIN 18 +#define BEEPER_PIN 18 #ifndef LCD_PINS_RS - #define LCD_PINS_RS 20 + #define LCD_PINS_RS 20 #endif #ifndef LCD_PINS_ENABLE - #define LCD_PINS_ENABLE 17 + #define LCD_PINS_ENABLE 17 #endif #ifndef LCD_PINS_D4 - #define LCD_PINS_D4 16 + #define LCD_PINS_D4 16 #endif #ifndef LCD_PINS_D5 - #define LCD_PINS_D5 21 + #define LCD_PINS_D5 21 #endif #ifndef LCD_PINS_D6 - #define LCD_PINS_D6 5 + #define LCD_PINS_D6 5 #endif #ifndef LCD_PINS_D7 - #define LCD_PINS_D7 36 + #define LCD_PINS_D7 36 #endif #if ENABLED(NEWPANEL) #ifndef BTN_EN1 - #define BTN_EN1 42 + #define BTN_EN1 42 #endif #ifndef BTN_EN2 - #define BTN_EN2 40 + #define BTN_EN2 40 #endif #ifndef BTN_ENC - #define BTN_ENC 19 + #define BTN_ENC 19 #endif #endif diff --git a/Marlin/src/pins/mega/pins_GT2560_V3_A20.h b/Marlin/src/pins/mega/pins_GT2560_V3_A20.h index 037ea13244..06ac9fd9df 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3_A20.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3_A20.h @@ -25,15 +25,15 @@ * Geeetech A20M pin assignment */ -#define LCD_PINS_RS 5 -#define LCD_PINS_ENABLE 36 -#define LCD_PINS_D4 21 -#define LCD_PINS_D7 6 +#define LCD_PINS_RS 5 +#define LCD_PINS_ENABLE 36 +#define LCD_PINS_D4 21 +#define LCD_PINS_D7 6 #if ENABLED(NEWPANEL) - #define BTN_EN1 16 - #define BTN_EN2 17 - #define BTN_ENC 19 + #define BTN_EN1 16 + #define BTN_EN2 17 + #define BTN_ENC 19 #endif #include "pins_GT2560_V3.h" diff --git a/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h b/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h index 7ba9112d4e..0f06aaf256 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3_MC2.h @@ -27,9 +27,9 @@ #define BOARD_INFO_NAME "GT2560 V3.0 (MC2)" -#define X_MIN_PIN 22 -#define X_MAX_PIN 24 -#define Y_MIN_PIN 26 -#define Y_MAX_PIN 28 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 #include "pins_GT2560_V3.h" diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index b667566688..66adfb2fa7 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -42,79 +42,79 @@ // // Limit Switches // -#define X_STOP_PIN 22 -#define Y_STOP_PIN 26 -#define Z_STOP_PIN 29 -//#define EXP_STOP_PIN 28 +#define X_STOP_PIN 22 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 29 +//#define EXP_STOP_PIN 28 // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 27 +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 -#define Y_STEP_PIN 32 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 31 +#define Y_STEP_PIN 32 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 31 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 36 -#define Z_ENABLE_PIN 34 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 36 +#define Z_ENABLE_PIN 34 -#define E0_STEP_PIN 42 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 37 +#define E0_STEP_PIN 42 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 37 -#define E1_STEP_PIN 49 -#define E1_DIR_PIN 47 -#define E1_ENABLE_PIN 48 +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 -#define MOTOR_CURRENT_PWM_XY_PIN 44 -#define MOTOR_CURRENT_PWM_Z_PIN 45 -#define MOTOR_CURRENT_PWM_E_PIN 46 +#define MOTOR_CURRENT_PWM_XY_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 46 // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #ifndef MOTOR_CURRENT_PWM_RANGE - #define MOTOR_CURRENT_PWM_RANGE 2000 + #define MOTOR_CURRENT_PWM_RANGE 2000 #endif #define DEFAULT_PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // // Temperature Sensors // -#define TEMP_0_PIN 8 // Analog Input -#define TEMP_1_PIN 9 // Analog Input -#define TEMP_BED_PIN 10 // Analog Input +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释 + #define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释 #endif // // Misc. Functions // -#define SDSS 53 -#define SD_DETECT_PIN 39 -//#define LED_PIN 8 -#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8 +#define SDSS 53 +#define SD_DETECT_PIN 39 +//#define LED_PIN 8 +#define CASE_LIGHT_PIN 8 // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8 -//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered -//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. +//#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered +//#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. // // M3/M4/M5 - Spindle/Laser Control // #if ENABLED(SPINDLE_LASER_ENABLE) - #define SPINDLE_DIR_PIN 16 - #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup! - #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM + #define SPINDLE_DIR_PIN 16 + #define SPINDLE_LASER_ENABLE_PIN 17 // Pin should have a pullup! + #define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM #endif // @@ -122,48 +122,48 @@ // #if HAS_SPI_LCD - #define BEEPER_PIN 18 + #define BEEPER_PIN 18 #if ENABLED(NEWPANEL) - #define LCD_PINS_RS 20 // LCD_CS - #define LCD_PINS_ENABLE 15 // LCD_SDA - #define LCD_PINS_D4 14 // LCD_SCK + #define LCD_PINS_RS 20 // LCD_CS + #define LCD_PINS_ENABLE 15 // LCD_SDA + #define LCD_PINS_D4 14 // LCD_SCK #if ENABLED(HJC_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 5 // LCD_Backlight + #define LCD_BACKLIGHT_PIN 5 // LCD_Backlight //#ifndef LCD_CONTRAST_PIN // #define LCD_CONTRAST_PIN 5 // LCD_Contrast //#endif #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 24 // Filament runout + #define FIL_RUNOUT_PIN 24 // Filament runout #endif #else - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 #endif - #define BTN_EN1 41 - #define BTN_EN2 40 - #define BTN_ENC 19 + #define BTN_EN1 41 + #define BTN_EN2 40 + #define BTN_ENC 19 - #define SD_DETECT_PIN 39 + #define SD_DETECT_PIN 39 #else // Buttons attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 6 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 20 - #define LCD_PINS_D7 19 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 #endif // !NEWPANEL diff --git a/Marlin/src/pins/mega/pins_LEAPFROG.h b/Marlin/src/pins/mega/pins_LEAPFROG.h index f04b89d4bc..188cbcad3d 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG.h @@ -34,59 +34,59 @@ // // Limit Switches // -#define X_MIN_PIN 47 -#define X_MAX_PIN 2 -#define Y_MIN_PIN 48 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 49 -#define Z_MAX_PIN -1 +#define X_MIN_PIN 47 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 48 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 49 +#define Z_MAX_PIN -1 // // Steppers // -#define X_STEP_PIN 28 -#define X_DIR_PIN 63 -#define X_ENABLE_PIN 29 +#define X_STEP_PIN 28 +#define X_DIR_PIN 63 +#define X_ENABLE_PIN 29 -#define Y_STEP_PIN 14 // A6 -#define Y_DIR_PIN 15 // A0 -#define Y_ENABLE_PIN 39 +#define Y_STEP_PIN 14 // A6 +#define Y_DIR_PIN 15 // A0 +#define Y_ENABLE_PIN 39 -#define Z_STEP_PIN 31 // A2 -#define Z_DIR_PIN 32 // A6 -#define Z_ENABLE_PIN 30 // A1 +#define Z_STEP_PIN 31 // A2 +#define Z_DIR_PIN 32 // A6 +#define Z_ENABLE_PIN 30 // A1 -#define E0_STEP_PIN 34 // 34 -#define E0_DIR_PIN 35 // 35 -#define E0_ENABLE_PIN 33 // 33 +#define E0_STEP_PIN 34 // 34 +#define E0_DIR_PIN 35 // 35 +#define E0_ENABLE_PIN 33 // 33 -#define E1_STEP_PIN 37 // 37 -#define E1_DIR_PIN 40 // 40 -#define E1_ENABLE_PIN 36 // 36 +#define E1_STEP_PIN 37 // 37 +#define E1_DIR_PIN 40 // 40 +#define E1_ENABLE_PIN 36 // 36 // // Temperature Sensors // -#define TEMP_0_PIN 13 // Analog Input (D27) -#define TEMP_1_PIN 15 // Analog Input (1) -#define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C) +#define TEMP_0_PIN 13 // Analog Input (D27) +#define TEMP_1_PIN 15 // Analog Input (1) +#define TEMP_BED_PIN 14 // Analog Input (1,2 or I2C) // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 8 // 12 -#define HEATER_2_PIN 11 // 13 -#define HEATER_BED_PIN 10 // 14/15 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 // 12 +#define HEATER_2_PIN 11 // 13 +#define HEATER_BED_PIN 10 // 14/15 -#define FAN_PIN 7 +#define FAN_PIN 7 // // Misc. Functions // -#define SDSS 11 -#define LED_PIN 13 -#define SOL1_PIN 16 -#define SOL2_PIN 17 +#define SDSS 11 +#define LED_PIN 13 +#define SOL1_PIN 16 +#define SOL2_PIN 17 /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ diff --git a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h index ab6299a9b0..36cb0e2c14 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h @@ -38,9 +38,9 @@ // // Limit Switches // -#define X_STOP_PIN 47 // 'X Min' -#define Y_STOP_PIN 48 // 'Y Min' -#define Z_STOP_PIN 49 // 'Z Min' +#define X_STOP_PIN 47 // 'X Min' +#define Y_STOP_PIN 48 // 'Y Min' +#define Z_STOP_PIN 49 // 'Z Min' // // Steppers @@ -51,65 +51,65 @@ // // X-axis signal-level connector -#define X_STEP_PIN 65 -#define X_DIR_PIN 64 -#define X_ENABLE_PIN 66 // Not actually used on Xeed, could be repurposed +#define X_STEP_PIN 65 +#define X_DIR_PIN 64 +#define X_ENABLE_PIN 66 // Not actually used on Xeed, could be repurposed // Y-axis signal-level connector -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 // Not actually used on Xeed, could be repurposed +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 // Not actually used on Xeed, could be repurposed // ZMOT connector (Front Right Z Motor) -#define Z_STEP_PIN 31 -#define Z_DIR_PIN 32 -#define Z_ENABLE_PIN 30 +#define Z_STEP_PIN 31 +#define Z_DIR_PIN 32 +#define Z_ENABLE_PIN 30 // XMOT connector (Rear Z Motor) -#define Z2_STEP_PIN 28 -#define Z2_DIR_PIN 63 -#define Z2_ENABLE_PIN 29 +#define Z2_STEP_PIN 28 +#define Z2_DIR_PIN 63 +#define Z2_ENABLE_PIN 29 // YMOT connector (Front Left Z Motor) -#define Z3_STEP_PIN 14 -#define Z3_DIR_PIN 15 -#define Z3_ENABLE_PIN 39 +#define Z3_STEP_PIN 14 +#define Z3_DIR_PIN 15 +#define Z3_ENABLE_PIN 39 // EMOT2 connector -#define E0_STEP_PIN 37 -#define E0_DIR_PIN 40 -#define E0_ENABLE_PIN 36 +#define E0_STEP_PIN 37 +#define E0_DIR_PIN 40 +#define E0_ENABLE_PIN 36 // EMOT connector -#define E1_STEP_PIN 34 -#define E1_DIR_PIN 35 -#define E1_ENABLE_PIN 33 +#define E1_STEP_PIN 34 +#define E1_DIR_PIN 35 +#define E1_ENABLE_PIN 33 // // Filament runout // -#define FIL_RUNOUT_PIN 42 // ROT2 Connector -#define FIL_RUNOUT2_PIN 44 // ROT1 Connector +#define FIL_RUNOUT_PIN 42 // ROT2 Connector +#define FIL_RUNOUT2_PIN 44 // ROT1 Connector // // Temperature Sensors // -#define TEMP_0_PIN 15 // T3 Connector -#define TEMP_1_PIN 13 // T1 Connector -#define TEMP_BED_PIN 14 // BED Connector (Between T1 and T3) +#define TEMP_0_PIN 15 // T3 Connector +#define TEMP_1_PIN 13 // T1 Connector +#define TEMP_BED_PIN 14 // BED Connector (Between T1 and T3) // // Heaters / Fans // -#define HEATER_0_PIN 8 // Misc Connector, pins 3 and 4 (Out2) -#define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3) -#define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA) +#define HEATER_0_PIN 8 // Misc Connector, pins 3 and 4 (Out2) +#define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3) +#define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA) -#define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4) +#define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4) -#define LED_PIN 13 +#define LED_PIN 13 -#define SOL1_PIN 7 // Misc Connector, pins 1(-) and 2(+) (Out1) +#define SOL1_PIN 7 // Misc Connector, pins 1(-) and 2(+) (Out1) // Door Closed Sensor -//#define DOOR_PIN 45 // HM1 Connector +//#define DOOR_PIN 45 // HM1 Connector diff --git a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h index 8fecc71bac..2d0db15825 100644 --- a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h +++ b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h @@ -36,89 +36,89 @@ // // Servos // -#define SERVO0_PIN 30 -#define SERVO1_PIN 31 -#define SERVO2_PIN 32 -#define SERVO3_PIN 33 +#define SERVO0_PIN 30 +#define SERVO1_PIN 31 +#define SERVO2_PIN 32 +#define SERVO3_PIN 33 // // Limit Switches // -#define X_MIN_PIN 43 -#define X_MAX_PIN 42 -#define Y_MIN_PIN 38 -#define Y_MAX_PIN 41 -#define Z_MIN_PIN 40 -#define Z_MAX_PIN 37 +#define X_MIN_PIN 43 +#define X_MAX_PIN 42 +#define Y_MIN_PIN 38 +#define Y_MAX_PIN 41 +#define Z_MIN_PIN 40 +#define Z_MAX_PIN 37 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 37 + #define Z_MIN_PROBE_PIN 37 #endif // // Steppers // -#define X_STEP_PIN 62 // A8 -#define X_DIR_PIN 63 // A9 -#define X_ENABLE_PIN 61 // A7 +#define X_STEP_PIN 62 // A8 +#define X_DIR_PIN 63 // A9 +#define X_ENABLE_PIN 61 // A7 -#define Y_STEP_PIN 65 // A11 -#define Y_DIR_PIN 66 // A12 -#define Y_ENABLE_PIN 64 // A10 +#define Y_STEP_PIN 65 // A11 +#define Y_DIR_PIN 66 // A12 +#define Y_ENABLE_PIN 64 // A10 -#define Z_STEP_PIN 68 // A14 -#define Z_DIR_PIN 69 // A15 -#define Z_ENABLE_PIN 67 // A13 +#define Z_STEP_PIN 68 // A14 +#define Z_DIR_PIN 69 // A15 +#define Z_ENABLE_PIN 67 // A13 -#define E0_STEP_PIN 23 -#define E0_DIR_PIN 24 -#define E0_ENABLE_PIN 22 +#define E0_STEP_PIN 23 +#define E0_DIR_PIN 24 +#define E0_ENABLE_PIN 22 -#define E1_STEP_PIN 26 -#define E1_DIR_PIN 27 -#define E1_ENABLE_PIN 25 +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 27 +#define E1_ENABLE_PIN 25 // // Temperature Sensors // #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 4 // Analog Input + #define TEMP_0_PIN 4 // Analog Input #else - #define TEMP_0_PIN 0 // Analog Input + #define TEMP_0_PIN 0 // Analog Input #endif #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 5 // Analog Input + #define TEMP_1_PIN 5 // Analog Input #else - #define TEMP_1_PIN 2 // Analog Input + #define TEMP_1_PIN 2 // Analog Input #endif -#define TEMP_2_PIN 3 // Analog Input +#define TEMP_2_PIN 3 // Analog Input #if TEMP_SENSOR_BED == -1 - #define TEMP_BED_PIN 6 // Analog Input + #define TEMP_BED_PIN 6 // Analog Input #else - #define TEMP_BED_PIN 1 // Analog Input + #define TEMP_BED_PIN 1 // Analog Input #endif // // Heaters / Fans // -#define HEATER_0_PIN 29 -#define HEATER_1_PIN 34 -#define HEATER_BED_PIN 28 +#define HEATER_0_PIN 29 +#define HEATER_1_PIN 34 +#define HEATER_BED_PIN 28 #ifndef FAN_PIN - #define FAN_PIN 39 + #define FAN_PIN 39 #endif -#define FAN1_PIN 35 -#define FAN2_PIN 36 +#define FAN1_PIN 35 +#define FAN2_PIN 36 #ifndef CONTROLLER_FAN_PIN - #define CONTROLLER_FAN_PIN FAN2_PIN + #define CONTROLLER_FAN_PIN FAN2_PIN #endif #define FAN_SOFT_PWM @@ -126,39 +126,39 @@ // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define CASE_LIGHT_PIN 2 +#define SDSS 53 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 2 // // LCD / Controller // #if ENABLED(MINIPANEL) - #define BEEPER_PIN 46 + #define BEEPER_PIN 46 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 47 - #define DOGLCD_CS 45 - #define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3 + #define DOGLCD_A0 47 + #define DOGLCD_CS 45 + #define LCD_BACKLIGHT_PIN 44 // backlight LED on PA3 - #define KILL_PIN 12 + #define KILL_PIN 12 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #define BTN_EN1 48 - #define BTN_EN2 11 - #define BTN_ENC 10 + #define BTN_EN1 48 + #define BTN_EN2 11 + #define BTN_ENC 10 - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #endif // MINIPANEL // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 7 // Pullup! -#define SPINDLE_DIR_PIN 8 +#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 7 // Pullup! +#define SPINDLE_DIR_PIN 8 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS.h b/Marlin/src/pins/mega/pins_MEGATRONICS.h index d3015340de..4d7a980050 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS.h @@ -33,99 +33,99 @@ // // Limit Switches // -#define X_MIN_PIN 41 -#define X_MAX_PIN 37 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define X_MIN_PIN 41 +#define X_MAX_PIN 37 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 19 + #define Z_MIN_PROBE_PIN 19 #endif // // Steppers // -#define X_STEP_PIN 26 -#define X_DIR_PIN 28 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 60 // A6 -#define Y_DIR_PIN 61 // A7 -#define Y_ENABLE_PIN 22 +#define Y_STEP_PIN 60 // A6 +#define Y_DIR_PIN 61 // A7 +#define Y_ENABLE_PIN 22 -#define Z_STEP_PIN 54 // A0 -#define Z_DIR_PIN 55 // A1 -#define Z_ENABLE_PIN 56 // A2 +#define Z_STEP_PIN 54 // A0 +#define Z_DIR_PIN 55 // A1 +#define Z_ENABLE_PIN 56 // A2 -#define E0_STEP_PIN 31 -#define E0_DIR_PIN 32 -#define E0_ENABLE_PIN 38 +#define E0_STEP_PIN 31 +#define E0_DIR_PIN 32 +#define E0_ENABLE_PIN 38 -#define E1_STEP_PIN 34 -#define E1_DIR_PIN 36 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 34 +#define E1_DIR_PIN 36 +#define E1_ENABLE_PIN 30 // // Temperature Sensors // #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 8 // Analog Input + #define TEMP_0_PIN 8 // Analog Input #else - #define TEMP_0_PIN 13 // Analog Input + #define TEMP_0_PIN 13 // Analog Input #endif -#define TEMP_1_PIN 15 // Analog Input -#define TEMP_BED_PIN 14 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 8 -#define HEATER_BED_PIN 10 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 +#define HEATER_BED_PIN 10 #ifndef FAN_PIN - #define FAN_PIN 7 // IO pin. Buffer needed + #define FAN_PIN 7 // IO pin. Buffer needed #endif // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 12 -#define CASE_LIGHT_PIN 2 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define CASE_LIGHT_PIN 2 // // LCD / Controller // -#define BEEPER_PIN 33 +#define BEEPER_PIN 33 #if BOTH(ULTRA_LCD, NEWPANEL) - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 // Buttons directly attached to AUX-2 - #define BTN_EN1 59 - #define BTN_EN2 64 - #define BTN_ENC 43 + #define BTN_EN1 59 + #define BTN_EN2 64 + #define BTN_ENC 43 - #define SD_DETECT_PIN -1 // RAMPS doesn't use this + #define SD_DETECT_PIN -1 // RAMPS doesn't use this #endif // HAS_SPI_LCD && NEWPANEL // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 4 // Pullup! -#define SPINDLE_DIR_PIN 11 +#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 4 // Pullup! +#define SPINDLE_DIR_PIN 11 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index 160d9d4b78..d976e09816 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -33,120 +33,120 @@ // // Limit Switches // -#define X_MIN_PIN 37 -#define X_MAX_PIN 40 -#define Y_MIN_PIN 41 -#define Y_MAX_PIN 38 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define X_MIN_PIN 37 +#define X_MAX_PIN 40 +#define Y_MIN_PIN 41 +#define Y_MAX_PIN 38 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 19 + #define Z_MIN_PROBE_PIN 19 #endif // // Steppers // -#define X_STEP_PIN 26 -#define X_DIR_PIN 27 -#define X_ENABLE_PIN 25 +#define X_STEP_PIN 26 +#define X_DIR_PIN 27 +#define X_ENABLE_PIN 25 -#define Y_STEP_PIN 4 // A6 -#define Y_DIR_PIN 54 // A0 -#define Y_ENABLE_PIN 5 +#define Y_STEP_PIN 4 // A6 +#define Y_DIR_PIN 54 // A0 +#define Y_ENABLE_PIN 5 -#define Z_STEP_PIN 56 // A2 -#define Z_DIR_PIN 60 // A6 -#define Z_ENABLE_PIN 55 // A1 +#define Z_STEP_PIN 56 // A2 +#define Z_DIR_PIN 60 // A6 +#define Z_ENABLE_PIN 55 // A1 -#define E0_STEP_PIN 35 -#define E0_DIR_PIN 36 -#define E0_ENABLE_PIN 34 +#define E0_STEP_PIN 35 +#define E0_DIR_PIN 36 +#define E0_ENABLE_PIN 34 -#define E1_STEP_PIN 29 -#define E1_DIR_PIN 39 -#define E1_ENABLE_PIN 28 +#define E1_STEP_PIN 29 +#define E1_DIR_PIN 39 +#define E1_ENABLE_PIN 28 -#define E2_STEP_PIN 23 // ? schematic says 24 -#define E2_DIR_PIN 24 // ? schematic says 23 -#define E2_ENABLE_PIN 22 +#define E2_STEP_PIN 23 // ? schematic says 24 +#define E2_DIR_PIN 24 // ? schematic says 23 +#define E2_ENABLE_PIN 22 // // Temperature Sensors // #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 4 // Analog Input + #define TEMP_0_PIN 4 // Analog Input #else - #define TEMP_0_PIN 13 // Analog Input + #define TEMP_0_PIN 13 // Analog Input #endif #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 8 // Analog Input + #define TEMP_1_PIN 8 // Analog Input #else - #define TEMP_1_PIN 15 // Analog Input + #define TEMP_1_PIN 15 // Analog Input #endif #if TEMP_SENSOR_BED == -1 - #define TEMP_BED_PIN 8 // Analog Input + #define TEMP_BED_PIN 8 // Analog Input #else - #define TEMP_BED_PIN 14 // Analog Input + #define TEMP_BED_PIN 14 // Analog Input #endif // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 8 -#define HEATER_BED_PIN 10 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 8 +#define HEATER_BED_PIN 10 #ifndef FAN_PIN - #define FAN_PIN 7 + #define FAN_PIN 7 #endif -#define FAN1_PIN 6 +#define FAN1_PIN 6 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 12 -#define CASE_LIGHT_PIN 2 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define CASE_LIGHT_PIN 2 // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 16 // Pullup! -#define SPINDLE_DIR_PIN 11 +#define SPINDLE_LASER_PWM_PIN 3 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 16 // Pullup! +#define SPINDLE_DIR_PIN 11 // // LCD / Controller // -#define BEEPER_PIN 64 +#define BEEPER_PIN 64 #if HAS_SPI_LCD - #define LCD_PINS_RS 14 - #define LCD_PINS_ENABLE 15 - #define LCD_PINS_D4 30 - #define LCD_PINS_D5 31 - #define LCD_PINS_D6 32 - #define LCD_PINS_D7 33 + #define LCD_PINS_RS 14 + #define LCD_PINS_ENABLE 15 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 31 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 33 #if ENABLED(NEWPANEL) // Buttons are directly attached using keypad - #define BTN_EN1 61 - #define BTN_EN2 59 - #define BTN_ENC 43 + #define BTN_EN1 61 + #define BTN_EN2 59 + #define BTN_ENC 43 #else // Buttons attached to shift register of reprapworld keypad v1.1 - #define SHIFT_CLK 63 - #define SHIFT_LD 42 - #define SHIFT_OUT 17 - #define SHIFT_EN 17 + #define SHIFT_CLK 63 + #define SHIFT_LD 42 + #define SHIFT_OUT 17 + #define SHIFT_EN 17 #endif #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h index fe0f4826be..78dd88809f 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h @@ -40,132 +40,132 @@ // // Servos // -#define SERVO0_PIN 46 // AUX3-6 -#define SERVO1_PIN 47 // AUX3-5 -#define SERVO2_PIN 48 // AUX3-4 -#define SERVO3_PIN 49 // AUX3-3 +#define SERVO0_PIN 46 // AUX3-6 +#define SERVO1_PIN 47 // AUX3-5 +#define SERVO2_PIN 48 // AUX3-4 +#define SERVO3_PIN 49 // AUX3-3 // // Limit Switches // -#define X_MIN_PIN 37 // No INT -#define X_MAX_PIN 40 // No INT -#define Y_MIN_PIN 41 // No INT -#define Y_MAX_PIN 38 // No INT -#define Z_MIN_PIN 18 // No INT -#define Z_MAX_PIN 19 // No INT +#define X_MIN_PIN 37 // No INT +#define X_MAX_PIN 40 // No INT +#define Y_MIN_PIN 41 // No INT +#define Y_MAX_PIN 38 // No INT +#define Z_MIN_PIN 18 // No INT +#define Z_MAX_PIN 19 // No INT // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 19 + #define Z_MIN_PROBE_PIN 19 #endif // // Steppers // -#define X_STEP_PIN 58 -#define X_DIR_PIN 57 -#define X_ENABLE_PIN 59 +#define X_STEP_PIN 58 +#define X_DIR_PIN 57 +#define X_ENABLE_PIN 59 -#define Y_STEP_PIN 5 -#define Y_DIR_PIN 17 -#define Y_ENABLE_PIN 4 +#define Y_STEP_PIN 5 +#define Y_DIR_PIN 17 +#define Y_ENABLE_PIN 4 -#define Z_STEP_PIN 16 -#define Z_DIR_PIN 11 -#define Z_ENABLE_PIN 3 +#define Z_STEP_PIN 16 +#define Z_DIR_PIN 11 +#define Z_ENABLE_PIN 3 -#define E0_STEP_PIN 28 -#define E0_DIR_PIN 27 -#define E0_ENABLE_PIN 29 +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 29 -#define E1_STEP_PIN 25 -#define E1_DIR_PIN 24 -#define E1_ENABLE_PIN 26 +#define E1_STEP_PIN 25 +#define E1_DIR_PIN 24 +#define E1_ENABLE_PIN 26 -#define E2_STEP_PIN 22 -#define E2_DIR_PIN 60 -#define E2_ENABLE_PIN 23 +#define E2_STEP_PIN 22 +#define E2_DIR_PIN 60 +#define E2_ENABLE_PIN 23 // // Temperature Sensors // #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 11 // Analog Input + #define TEMP_0_PIN 11 // Analog Input #else - #define TEMP_0_PIN 15 // Analog Input + #define TEMP_0_PIN 15 // Analog Input #endif #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 10 // Analog Input + #define TEMP_1_PIN 10 // Analog Input #else - #define TEMP_1_PIN 13 // Analog Input + #define TEMP_1_PIN 13 // Analog Input #endif #if TEMP_SENSOR_2 == -1 - #define TEMP_2_PIN 9 // Analog Input + #define TEMP_2_PIN 9 // Analog Input #else - #define TEMP_2_PIN 12 // Analog Input + #define TEMP_2_PIN 12 // Analog Input #endif #if TEMP_SENSOR_BED == -1 - #define TEMP_BED_PIN 8 // Analog Input + #define TEMP_BED_PIN 8 // Analog Input #else - #define TEMP_BED_PIN 14 // Analog Input + #define TEMP_BED_PIN 14 // Analog Input #endif // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 9 -#define HEATER_2_PIN 8 -#define HEATER_BED_PIN 10 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 9 +#define HEATER_2_PIN 8 +#define HEATER_BED_PIN 10 #ifndef FAN_PIN - #define FAN_PIN 6 + #define FAN_PIN 6 #endif -#define FAN1_PIN 7 +#define FAN1_PIN 7 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 12 -#define CASE_LIGHT_PIN 45 // Try the keypad connector +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define CASE_LIGHT_PIN 45 // Try the keypad connector // // LCD / Controller // -#define BEEPER_PIN 61 +#define BEEPER_PIN 61 -#define BTN_EN1 44 -#define BTN_EN2 45 -#define BTN_ENC 33 +#define BTN_EN1 44 +#define BTN_EN2 45 +#define BTN_ENC 33 #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 56 // CS chip select / SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock - #define SD_DETECT_PIN 35 + #define LCD_PINS_RS 56 // CS chip select / SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock + #define SD_DETECT_PIN 35 #else - #define LCD_PINS_RS 32 - #define LCD_PINS_ENABLE 31 - #define LCD_PINS_D4 14 - #define LCD_PINS_D5 30 - #define LCD_PINS_D6 39 - #define LCD_PINS_D7 15 + #define LCD_PINS_RS 32 + #define LCD_PINS_ENABLE 31 + #define LCD_PINS_D4 14 + #define LCD_PINS_D5 30 + #define LCD_PINS_D6 39 + #define LCD_PINS_D7 15 - #define SHIFT_CLK 43 - #define SHIFT_LD 35 - #define SHIFT_OUT 34 - #define SHIFT_EN 44 + #define SHIFT_CLK 43 + #define SHIFT_LD 35 + #define SHIFT_OUT 34 + #define SHIFT_EN 44 #if MB(MEGATRONICS_31, MEGATRONICS_32) - #define SD_DETECT_PIN 56 + #define SD_DETECT_PIN 56 #endif #endif @@ -173,23 +173,23 @@ // // M3/M4/M5 - Spindle/Laser Control // -#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first - #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 43 // Pullup! - #define SPINDLE_DIR_PIN 42 +#if DISABLED(REPRAPWORLD_KEYPAD) // try to use the keypad connector first + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 43 // Pullup! + #define SPINDLE_DIR_PIN 42 #elif EXTRUDERS <= 2 // Hijack the last extruder so that we can get the PWM signal off the Y breakout // Move Y to the E2 plug. This makes dual Y steppers harder - #undef Y_ENABLE_PIN // 4 - #undef Y_STEP_PIN // 5 - #undef Y_DIR_PIN // 17 - #undef E2_ENABLE_PIN // 23 - #undef E2_STEP_PIN // 22 - #undef E2_DIR_PIN // 60 - #define Y_ENABLE_PIN 23 - #define Y_STEP_PIN 22 - #define Y_DIR_PIN 60 - #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 17 // Pullup! - #define SPINDLE_DIR_PIN 5 + #undef Y_ENABLE_PIN // 4 + #undef Y_STEP_PIN // 5 + #undef Y_DIR_PIN // 17 + #undef E2_ENABLE_PIN // 23 + #undef E2_STEP_PIN // 22 + #undef E2_DIR_PIN // 60 + #define Y_ENABLE_PIN 23 + #define Y_STEP_PIN 22 + #define Y_DIR_PIN 60 + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 17 // Pullup! + #define SPINDLE_DIR_PIN 5 #endif diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index 6d3102172b..3282216819 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -47,60 +47,60 @@ // // Servos // -#define SERVO0_PIN 36 // C1 (1280-EX1) -#define SERVO1_PIN 37 // C0 (1280-EX2) -#define SERVO2_PIN 40 // G1 (1280-EX3) -#define SERVO3_PIN 41 // G0 (1280-EX4) +#define SERVO0_PIN 36 // C1 (1280-EX1) +#define SERVO1_PIN 37 // C0 (1280-EX2) +#define SERVO2_PIN 40 // G1 (1280-EX3) +#define SERVO3_PIN 41 // G0 (1280-EX4) // // Limit Switches // -#define X_MIN_PIN 49 // L0 -#define X_MAX_PIN 48 // L1 -#define Y_MIN_PIN 47 // L2 -#define Y_MAX_PIN 46 // L3 -#define Z_MIN_PIN 43 // L6 -#define Z_MAX_PIN 42 // L7 +#define X_MIN_PIN 49 // L0 +#define X_MAX_PIN 48 // L1 +#define Y_MIN_PIN 47 // L2 +#define Y_MAX_PIN 46 // L3 +#define Z_MIN_PIN 43 // L6 +#define Z_MAX_PIN 42 // L7 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 42 + #define Z_MIN_PROBE_PIN 42 #endif // // Filament Runout Pins // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 49 + #define FIL_RUNOUT_PIN 49 #endif #ifndef FIL_RUNOUT2_PIN - #define FIL_RUNOUT2_PIN 47 + #define FIL_RUNOUT2_PIN 47 #endif // // Steppers // -#define X_STEP_PIN 55 // F1 -#define X_DIR_PIN 54 // F0 -#define X_ENABLE_PIN 56 // F2 +#define X_STEP_PIN 55 // F1 +#define X_DIR_PIN 54 // F0 +#define X_ENABLE_PIN 56 // F2 -#define Y_STEP_PIN 59 // F5 -#define Y_DIR_PIN 58 // F4 -#define Y_ENABLE_PIN 60 // F6 +#define Y_STEP_PIN 59 // F5 +#define Y_DIR_PIN 58 // F4 +#define Y_ENABLE_PIN 60 // F6 -#define Z_STEP_PIN 63 // K1 -#define Z_DIR_PIN 62 // K0 -#define Z_ENABLE_PIN 64 // K2 +#define Z_STEP_PIN 63 // K1 +#define Z_DIR_PIN 62 // K0 +#define Z_ENABLE_PIN 64 // K2 -#define E0_STEP_PIN 25 // A3 -#define E0_DIR_PIN 24 // A2 -#define E0_ENABLE_PIN 26 // A4 +#define E0_STEP_PIN 25 // A3 +#define E0_DIR_PIN 24 // A2 +#define E0_ENABLE_PIN 26 // A4 -#define E1_STEP_PIN 29 // A7 -#define E1_DIR_PIN 28 // A6 -#define E1_ENABLE_PIN 39 // G2 +#define E1_STEP_PIN 29 // A7 +#define E1_DIR_PIN 28 // A6 +#define E1_ENABLE_PIN 39 // G2 // // I2C Digipots - MCP4018 @@ -108,22 +108,22 @@ // Set from 0 - 127 with stop bit. // (Ex. 3F << 1 | 1) // -#define DIGIPOTS_I2C_SCL 76 // J5 -#define DIGIPOTS_I2C_SDA_X 57 // F3 -#define DIGIPOTS_I2C_SDA_Y 61 // F7 -#define DIGIPOTS_I2C_SDA_Z 65 // K3 -#define DIGIPOTS_I2C_SDA_E0 27 // A5 -#define DIGIPOTS_I2C_SDA_E1 77 // J6 +#define DIGIPOTS_I2C_SCL 76 // J5 +#define DIGIPOTS_I2C_SDA_X 57 // F3 +#define DIGIPOTS_I2C_SDA_Y 61 // F7 +#define DIGIPOTS_I2C_SDA_Z 65 // K3 +#define DIGIPOTS_I2C_SDA_E0 27 // A5 +#define DIGIPOTS_I2C_SDA_E1 77 // J6 #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) + #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address (5E <- 2F << 1) #endif // // Temperature Sensors // // K7 - 69 / ADC15 - 15 -#define TEMP_BED_PIN 15 +#define TEMP_BED_PIN 15 // SPI for Max6675 or Max31855 Thermocouple // Uses a separate SPI bus @@ -133,15 +133,15 @@ // 2 E4 CS2 // 78 E2 SCK // -#define THERMO_SCK_PIN 78 // E2 -#define THERMO_DO_PIN 3 // E5 -#define THERMO_CS1_PIN 5 // E3 -#define THERMO_CS2_PIN 2 // E4 +#define THERMO_SCK_PIN 78 // E2 +#define THERMO_DO_PIN 3 // E5 +#define THERMO_CS1_PIN 5 // E3 +#define THERMO_CS2_PIN 2 // E4 -#define MAX6675_SS_PIN THERMO_CS1_PIN -#define MAX6675_SS2_PIN THERMO_CS2_PIN -#define MAX6675_SCK_PIN THERMO_SCK_PIN -#define MAX6675_DO_PIN THERMO_DO_PIN +#define MAX6675_SS_PIN THERMO_CS1_PIN +#define MAX6675_SS2_PIN THERMO_CS2_PIN +#define MAX6675_SCK_PIN THERMO_SCK_PIN +#define MAX6675_DO_PIN THERMO_DO_PIN // // Augmentation for auto-assigning plugs @@ -152,12 +152,12 @@ // // Labels from the schematic: -#define EX1_HEAT_PIN 6 // H3 -#define EX1_FAN_PIN 7 // H4 -#define EX2_HEAT_PIN 11 // B5 -#define EX2_FAN_PIN 12 // B6 -#define HBP_PIN 45 // L4 -#define EXTRA_FET_PIN 44 // L5 +#define EX1_HEAT_PIN 6 // H3 +#define EX1_FAN_PIN 7 // H4 +#define EX2_HEAT_PIN 11 // B5 +#define EX2_FAN_PIN 12 // B6 +#define HBP_PIN 45 // L4 +#define EXTRA_FET_PIN 44 // L5 #if HOTENDS > 1 #if TEMP_SENSOR_BED @@ -174,35 +174,35 @@ // // Heaters / Fans (24V) // -#define HEATER_0_PIN EX1_HEAT_PIN +#define HEATER_0_PIN EX1_HEAT_PIN -#if ENABLED(IS_EFB) // Hotend, Fan, Bed - #define HEATER_BED_PIN HBP_PIN -#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan - #define HEATER_1_PIN EX2_HEAT_PIN -#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed - #define HEATER_1_PIN EX2_HEAT_PIN - #define HEATER_BED_PIN HBP_PIN -#elif ENABLED(IS_EFF) // Hotend, Fan, Fan - #define FAN1_PIN HBP_PIN +#if ENABLED(IS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN HBP_PIN +#elif ENABLED(IS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN EX2_HEAT_PIN +#elif ENABLED(IS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN EX2_HEAT_PIN + #define HEATER_BED_PIN HBP_PIN +#elif ENABLED(IS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN HBP_PIN #endif #ifndef FAN_PIN #if EITHER(IS_EFB, IS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan - #define FAN_PIN EX2_HEAT_PIN + #define FAN_PIN EX2_HEAT_PIN #elif EITHER(IS_EEF, IS_SF) // Hotend, Hotend, Fan or Spindle, Fan - #define FAN_PIN HBP_PIN + #define FAN_PIN HBP_PIN #else - #define FAN_PIN EXTRA_FET_PIN + #define FAN_PIN EXTRA_FET_PIN #endif #endif // // Misc. Functions // -#define LED_PIN 13 // B7 -#define CUTOFF_RESET_PIN 16 // H1 -#define CUTOFF_TEST_PIN 17 // H0 +#define LED_PIN 13 // B7 +#define CUTOFF_RESET_PIN 16 // H1 +#define CUTOFF_TEST_PIN 17 // H0 // // LCD / Controller @@ -211,57 +211,57 @@ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define LCD_PINS_RS 33 // C4: LCD-STROBE - #define LCD_PINS_ENABLE 72 // J2: LEFT - #define LCD_PINS_D4 35 // C2: LCD-CLK - #define LCD_PINS_D5 32 // C5: RLED - #define LCD_PINS_D6 34 // C3: LCD-DATA - #define LCD_PINS_D7 31 // C6: GLED + #define LCD_PINS_RS 33 // C4: LCD-STROBE + #define LCD_PINS_ENABLE 72 // J2: LEFT + #define LCD_PINS_D4 35 // C2: LCD-CLK + #define LCD_PINS_D5 32 // C5: RLED + #define LCD_PINS_D6 34 // C3: LCD-DATA + #define LCD_PINS_D7 31 // C6: GLED - #define BTN_EN2 75 // J4, UP - #define BTN_EN1 73 // J3, DOWN + #define BTN_EN2 75 // J4, UP + #define BTN_EN1 73 // J3, DOWN //STOP button connected as KILL_PIN - #define KILL_PIN 14 // J1, RIGHT + #define KILL_PIN 14 // J1, RIGHT //KILL - not connected - #define BEEPER_PIN 8 // H5, SD_WP + #define BEEPER_PIN 8 // H5, SD_WP //on board leds - #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2) - #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3) + #define STAT_LED_RED_LED SERVO0_PIN // C1 (1280-EX1, DEBUG2) + #define STAT_LED_BLUE_PIN SERVO1_PIN // C0 (1280-EX2, DEBUG3) #else // Replicator uses a 3-wire SR controller with HD44780 - #define SR_DATA_PIN 34 // C3 - #define SR_CLK_PIN 35 // C2 - #define SR_STROBE_PIN 33 // C4 + #define SR_DATA_PIN 34 // C3 + #define SR_CLK_PIN 35 // C2 + #define SR_STROBE_PIN 33 // C4 - #define BTN_UP 75 // J4 - #define BTN_DWN 73 // J3 - #define BTN_LFT 72 // J2 - #define BTN_RT 14 // J1 + #define BTN_UP 75 // J4 + #define BTN_DWN 73 // J3 + #define BTN_LFT 72 // J2 + #define BTN_RT 14 // J1 // Disable encoder #undef BTN_EN1 #undef BTN_EN2 - #define BEEPER_PIN 4 // G5 + #define BEEPER_PIN 4 // G5 - #define STAT_LED_RED_PIN 32 // C5 - #define STAT_LED_BLUE_PIN 31 // C6 (Actually green) + #define STAT_LED_RED_PIN 32 // C5 + #define STAT_LED_BLUE_PIN 31 // C6 (Actually green) #endif - #define BTN_CENTER 15 // J0 - #define BTN_ENC BTN_CENTER + #define BTN_CENTER 15 // J0 + #define BTN_ENC BTN_CENTER #endif // HAS_SPI_LCD // // SD Card // -#define SDSS 53 // B0 -#define SD_DETECT_PIN 9 // H6 +#define SDSS 53 // B0 +#define SD_DETECT_PIN 9 // H6 // // TMC 220x @@ -280,19 +280,19 @@ * Software serial */ - #define X_SERIAL_TX_PIN 16 - #define X_SERIAL_RX_PIN 17 + #define X_SERIAL_TX_PIN 16 + #define X_SERIAL_RX_PIN 17 - #define Y_SERIAL_TX_PIN 18 - #define Y_SERIAL_RX_PIN 19 + #define Y_SERIAL_TX_PIN 18 + #define Y_SERIAL_RX_PIN 19 - #define Z_SERIAL_TX_PIN 41 - #define Z_SERIAL_RX_PIN 66 + #define Z_SERIAL_TX_PIN 41 + #define Z_SERIAL_RX_PIN 66 - #define E0_SERIAL_TX_PIN 40 - #define E0_SERIAL_RX_PIN 67 + #define E0_SERIAL_TX_PIN 40 + #define E0_SERIAL_RX_PIN 67 - #define E1_SERIAL_TX_PIN 37 - #define E1_SERIAL_RX_PIN 68 + #define E1_SERIAL_TX_PIN 37 + #define E1_SERIAL_RX_PIN 68 #endif diff --git a/Marlin/src/pins/mega/pins_MINITRONICS.h b/Marlin/src/pins/mega/pins_MINITRONICS.h index 5b06e3b835..35d1b59ecb 100644 --- a/Marlin/src/pins/mega/pins_MINITRONICS.h +++ b/Marlin/src/pins/mega/pins_MINITRONICS.h @@ -42,102 +42,102 @@ // // Limit Switches // -#define X_MIN_PIN 5 -#define X_MAX_PIN 2 -#define Y_MIN_PIN 2 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 6 -#define Z_MAX_PIN -1 +#define X_MIN_PIN 5 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 2 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 6 +#define Z_MAX_PIN -1 // // Steppers // -#define X_STEP_PIN 48 -#define X_DIR_PIN 47 -#define X_ENABLE_PIN 49 +#define X_STEP_PIN 48 +#define X_DIR_PIN 47 +#define X_ENABLE_PIN 49 -#define Y_STEP_PIN 39 // A6 -#define Y_DIR_PIN 40 // A0 -#define Y_ENABLE_PIN 38 +#define Y_STEP_PIN 39 // A6 +#define Y_DIR_PIN 40 // A0 +#define Y_ENABLE_PIN 38 -#define Z_STEP_PIN 42 // A2 -#define Z_DIR_PIN 43 // A6 -#define Z_ENABLE_PIN 41 // A1 +#define Z_STEP_PIN 42 // A2 +#define Z_DIR_PIN 43 // A6 +#define Z_ENABLE_PIN 41 // A1 -#define E0_STEP_PIN 45 -#define E0_DIR_PIN 44 -#define E0_ENABLE_PIN 27 +#define E0_STEP_PIN 45 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 27 -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 35 -#define E1_ENABLE_PIN 37 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 35 +#define E1_ENABLE_PIN 37 // // Temperature Sensors // -#define TEMP_0_PIN 7 // Analog Input -#define TEMP_1_PIN 6 // Analog Input -#define TEMP_BED_PIN 6 // Analog Input +#define TEMP_0_PIN 7 // Analog Input +#define TEMP_1_PIN 6 // Analog Input +#define TEMP_BED_PIN 6 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 7 // EXTRUDER 1 -#define HEATER_1_PIN 8 // EXTRUDER 2 -#define HEATER_BED_PIN 3 // BED +#define HEATER_0_PIN 7 // EXTRUDER 1 +#define HEATER_1_PIN 8 // EXTRUDER 2 +#define HEATER_BED_PIN 3 // BED #ifndef FAN_PIN - #define FAN_PIN 9 + #define FAN_PIN 9 #endif // // Misc. Functions // -#define SDSS 16 -#define LED_PIN 46 +#define SDSS 16 +#define LED_PIN 46 // // LCD / Controller // -#define BEEPER_PIN -1 +#define BEEPER_PIN -1 #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 15 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 11 // SID (MOSI) - #define LCD_PINS_D4 10 // SCK (CLK) clock + #define LCD_PINS_RS 15 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 11 // SID (MOSI) + #define LCD_PINS_D4 10 // SCK (CLK) clock - #define BTN_EN1 18 - #define BTN_EN2 17 - #define BTN_ENC 25 + #define BTN_EN1 18 + #define BTN_EN2 17 + #define BTN_ENC 25 - #define SD_DETECT_PIN 30 + #define SD_DETECT_PIN 30 #else - #define LCD_PINS_RS -1 - #define LCD_PINS_ENABLE -1 + #define LCD_PINS_RS -1 + #define LCD_PINS_ENABLE -1 // Buttons are directly attached using keypad - #define BTN_EN1 -1 - #define BTN_EN2 -1 - #define BTN_ENC -1 + #define BTN_EN1 -1 + #define BTN_EN2 -1 + #define BTN_ENC -1 - #define SD_DETECT_PIN -1 // Minitronics doesn't use this + #define SD_DETECT_PIN -1 // Minitronics doesn't use this #endif // // M3/M4/M5 - Spindle/Laser Control // -#if HAS_CUTTER // assumes we're only doing CNC work (no 3D printing) +#if HAS_CUTTER // assumes we're only doing CNC work (no 3D printing) #undef HEATER_BED_PIN - #undef TEMP_BED_PIN // need to free up some pins but also need to - #undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin - #undef TEMP_1_PIN // requires the presence of certain pins or else it - #define HEATER_BED_PIN 4 // won't compile - #define TEMP_BED_PIN 50 - #define TEMP_0_PIN 51 - #define SPINDLE_LASER_ENA_PIN 52 // using A6 because it already has a pullup - #define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage - #define SPINDLE_DIR_PIN 53 + #undef TEMP_BED_PIN // need to free up some pins but also need to + #undef TEMP_0_PIN // re-assign them (to unused pins) because Marlin + #undef TEMP_1_PIN // requires the presence of certain pins or else it + #define HEATER_BED_PIN 4 // won't compile + #define TEMP_BED_PIN 50 + #define TEMP_0_PIN 51 + #define SPINDLE_LASER_ENA_PIN 52 // using A6 because it already has a pullup + #define SPINDLE_LASER_PWM_PIN 3 // WARNING - LED & resistor pull up to +12/+24V stepper voltage + #define SPINDLE_DIR_PIN 53 #endif diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 80f72d04e9..4e02127c12 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -37,83 +37,83 @@ // // Limit Switches // -#define X_STOP_PIN 24 -#define Y_STOP_PIN 28 -#define Z_MIN_PIN 46 -#define Z_MAX_PIN 32 +#define X_STOP_PIN 24 +#define Y_STOP_PIN 28 +#define Z_MIN_PIN 46 +#define Z_MAX_PIN 32 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 46 // JP4, Tfeed1 + #define Z_MIN_PROBE_PIN 46 // JP4, Tfeed1 #endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define FIL_RUNOUT_PIN 44 // JP3, Tfeed2 + #define FIL_RUNOUT_PIN 44 // JP3, Tfeed2 #endif // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 27 +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 29 +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 -#define Z_STEP_PIN 37 -#define Z_DIR_PIN 39 -#define Z_ENABLE_PIN 35 +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 -#define E0_STEP_PIN 43 -#define E0_DIR_PIN 45 -#define E0_ENABLE_PIN 41 +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 -#define E1_STEP_PIN 49 -#define E1_DIR_PIN 47 -#define E1_ENABLE_PIN 48 +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 // // Temperature Sensors // -#define TEMP_0_PIN 8 // Analog Input -#define TEMP_1_PIN 9 // Analog Input - Redundant temp sensor -#define TEMP_2_PIN 12 // Analog Input -#define TEMP_3_PIN 14 // Analog Input -#define TEMP_BED_PIN 10 // Analog Input +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input - Redundant temp sensor +#define TEMP_2_PIN 12 // Analog Input +#define TEMP_3_PIN 14 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 -#define FAN_PIN 7 // material cooling fan +#define FAN_PIN 7 // material cooling fan // // SD Card // -#define SDSS 53 -#define SD_DETECT_PIN 38 +#define SDSS 53 +#define SD_DETECT_PIN 38 // // Misc. Functions // -#define LED_PIN 13 // On PCB status led -#define PS_ON_PIN 12 // For stepper/heater/fan power. Active HIGH. -#define POWER_LOSS_PIN 34 // Power check - whether hotends/steppers/fans have power +#define LED_PIN 13 // On PCB status led +#define PS_ON_PIN 12 // For stepper/heater/fan power. Active HIGH. +#define POWER_LOSS_PIN 34 // Power check - whether hotends/steppers/fans have power #if ENABLED(BATTERY_STATUS_AVAILABLE) #undef BATTERY_STATUS_PIN - #define BATTERY_STATUS_PIN 26 // Status of power loss battery, whether it is charged (low) or charging (high) + #define BATTERY_STATUS_PIN 26 // Status of power loss battery, whether it is charged (low) or charging (high) #endif #if ENABLED(INPUT_VOLTAGE_AVAILABLE) #undef VOLTAGE_DETECTION_PIN - #define VOLTAGE_DETECTION_PIN 11 // Analog Input - ADC Voltage level of main input + #define VOLTAGE_DETECTION_PIN 11 // Analog Input - ADC Voltage level of main input #endif // @@ -121,24 +121,24 @@ // #if HAS_GRAPHICAL_LCD // OVERLORD OLED pins - #define LCD_PINS_RS 20 - #define LCD_PINS_D5 21 - #define LCD_PINS_ENABLE 15 - #define LCD_PINS_D4 14 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 + #define LCD_PINS_RS 20 + #define LCD_PINS_D5 21 + #define LCD_PINS_ENABLE 15 + #define LCD_PINS_D4 14 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 #ifndef LCD_RESET_PIN - #define LCD_RESET_PIN 5 // LCD_PINS_D6 + #define LCD_RESET_PIN 5 // LCD_PINS_D6 #endif #endif #if ENABLED(NEWPANEL) - #define BTN_ENC 16 // Enter Pin - #define BTN_UP 19 // Button UP Pin - #define BTN_DWN 17 // Button DOWN Pin + #define BTN_ENC 16 // Enter Pin + #define BTN_UP 19 // Button UP Pin + #define BTN_DWN 17 // Button DOWN Pin #endif // Additional connectors/pins on the Overlord V1.X board -#define PCB_VERSION_PIN 22 -#define APPROACH_PIN 11 // JP7, Tpd -#define GATE_PIN 36 // Threshold, JP6, Tg +#define PCB_VERSION_PIN 22 +#define APPROACH_PIN 11 // JP7, Tpd +#define GATE_PIN 36 // Threshold, JP6, Tg diff --git a/Marlin/src/pins/mega/pins_PICA.h b/Marlin/src/pins/mega/pins_PICA.h index 4c618bda4e..f00d817d6e 100644 --- a/Marlin/src/pins/mega/pins_PICA.h +++ b/Marlin/src/pins/mega/pins_PICA.h @@ -49,95 +49,95 @@ // // Limit Switches // -#define X_MIN_PIN 14 -#define X_MAX_PIN 15 -#define Y_MIN_PIN 16 -#define Y_MAX_PIN 17 -#define Z_MIN_PIN 23 -#define Z_MAX_PIN 22 +#define X_MIN_PIN 14 +#define X_MAX_PIN 15 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN 17 +#define Z_MIN_PIN 23 +#define Z_MAX_PIN 22 // // Steppers // -#define X_STEP_PIN 55 -#define X_DIR_PIN 54 -#define X_ENABLE_PIN 60 +#define X_STEP_PIN 55 +#define X_DIR_PIN 54 +#define X_ENABLE_PIN 60 -#define Y_STEP_PIN 57 -#define Y_DIR_PIN 56 -#define Y_ENABLE_PIN 61 +#define Y_STEP_PIN 57 +#define Y_DIR_PIN 56 +#define Y_ENABLE_PIN 61 -#define Z_STEP_PIN 59 -#define Z_DIR_PIN 58 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 59 +#define Z_DIR_PIN 58 +#define Z_ENABLE_PIN 62 -#define E0_STEP_PIN 67 -#define E0_DIR_PIN 24 -#define E0_ENABLE_PIN 26 +#define E0_STEP_PIN 67 +#define E0_DIR_PIN 24 +#define E0_ENABLE_PIN 26 // // Temperature Sensors // -#define TEMP_0_PIN 9 // Analog Input -#define TEMP_1_PIN 10 -#define TEMP_BED_PIN 10 -#define TEMP_2_PIN 11 -#define TEMP_3_PIN 12 +#define TEMP_0_PIN 9 // Analog Input +#define TEMP_1_PIN 10 +#define TEMP_BED_PIN 10 +#define TEMP_2_PIN 11 +#define TEMP_3_PIN 12 // // Heaters / Fans // #ifndef HEATER_0_PIN - #define HEATER_0_PIN 10 // E0 + #define HEATER_0_PIN 10 // E0 #endif #ifndef HEATER_1_PIN - #define HEATER_1_PIN 2 // E1 + #define HEATER_1_PIN 2 // E1 #endif -#define HEATER_BED_PIN 8 // HEAT-BED +#define HEATER_BED_PIN 8 // HEAT-BED #ifndef FAN_PIN - #define FAN_PIN 9 + #define FAN_PIN 9 #endif #ifndef FAN_2_PIN - #define FAN_2_PIN 7 + #define FAN_2_PIN 7 #endif -#define SDPOWER_PIN -1 -#define LED_PIN -1 -#define PS_ON_PIN -1 -#define KILL_PIN -1 +#define SDPOWER_PIN -1 +#define LED_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 -#define SSR_PIN 6 +#define SSR_PIN 6 // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // // SD Support // -#define SD_DETECT_PIN 49 -#define SDSS 53 +#define SD_DETECT_PIN 49 +#define SDSS 53 // // LCD / Controller // -#define BEEPER_PIN 29 +#define BEEPER_PIN 29 #if HAS_SPI_LCD - #define LCD_PINS_RS 33 - #define LCD_PINS_ENABLE 30 - #define LCD_PINS_D4 35 - #define LCD_PINS_D5 32 - #define LCD_PINS_D6 37 - #define LCD_PINS_D7 36 + #define LCD_PINS_RS 33 + #define LCD_PINS_ENABLE 30 + #define LCD_PINS_D4 35 + #define LCD_PINS_D5 32 + #define LCD_PINS_D6 37 + #define LCD_PINS_D7 36 - #define BTN_EN1 47 - #define BTN_EN2 48 - #define BTN_ENC 31 + #define BTN_EN1 47 + #define BTN_EN2 48 + #define BTN_ENC 31 - #define LCD_SDSS 53 + #define LCD_SDSS 53 #endif diff --git a/Marlin/src/pins/mega/pins_PICAOLD.h b/Marlin/src/pins/mega/pins_PICAOLD.h index 88fa1ada29..34861277a8 100644 --- a/Marlin/src/pins/mega/pins_PICAOLD.h +++ b/Marlin/src/pins/mega/pins_PICAOLD.h @@ -20,9 +20,9 @@ * */ -#define HEATER_0_PIN 9 // E0 -#define HEATER_1_PIN 10 // E1 -#define FAN_PIN 11 -#define FAN2_PIN 12 +#define HEATER_0_PIN 9 // E0 +#define HEATER_1_PIN 10 // E1 +#define FAN_PIN 11 +#define FAN2_PIN 12 #include "pins_PICA.h" diff --git a/Marlin/src/pins/mega/pins_SILVER_GATE.h b/Marlin/src/pins/mega/pins_SILVER_GATE.h index bde1f87088..4c79507eab 100644 --- a/Marlin/src/pins/mega/pins_SILVER_GATE.h +++ b/Marlin/src/pins/mega/pins_SILVER_GATE.h @@ -27,67 +27,67 @@ #define BOARD_INFO_NAME "Silver Gate" -#define X_STEP_PIN 43 -#define X_DIR_PIN 44 -#define X_ENABLE_PIN 42 -#define X_MIN_PIN 31 -#define X_MAX_PIN 34 +#define X_STEP_PIN 43 +#define X_DIR_PIN 44 +#define X_ENABLE_PIN 42 +#define X_MIN_PIN 31 +#define X_MAX_PIN 34 -#define Y_STEP_PIN 40 -#define Y_DIR_PIN 41 -#define Y_ENABLE_PIN 39 -#define Y_MIN_PIN 32 -#define Y_MAX_PIN 35 +#define Y_STEP_PIN 40 +#define Y_DIR_PIN 41 +#define Y_ENABLE_PIN 39 +#define Y_MIN_PIN 32 +#define Y_MAX_PIN 35 -#define Z_STEP_PIN 13 -#define Z_DIR_PIN 38 -#define Z_ENABLE_PIN 14 -#define Z_MIN_PIN 33 -#define Z_MAX_PIN 36 +#define Z_STEP_PIN 13 +#define Z_DIR_PIN 38 +#define Z_ENABLE_PIN 14 +#define Z_MIN_PIN 33 +#define Z_MAX_PIN 36 -#define E0_STEP_PIN 27 -#define E0_DIR_PIN 37 -#define E0_ENABLE_PIN 45 +#define E0_STEP_PIN 27 +#define E0_DIR_PIN 37 +#define E0_ENABLE_PIN 45 -#define SDSS 16 +#define SDSS 16 #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 34 // X_MAX unless overridden + #define FIL_RUNOUT_PIN 34 // X_MAX unless overridden #endif #ifndef FAN_PIN - #define FAN_PIN 5 + #define FAN_PIN 5 #endif -#define HEATER_0_PIN 7 +#define HEATER_0_PIN 7 -#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN -#define CONTROLLER_FAN_PIN 2 +#define ORIG_E0_AUTO_FAN_PIN 3 // Use this by NOT overriding E0_AUTO_FAN_PIN +#define CONTROLLER_FAN_PIN 2 -#define TEMP_0_PIN 7 // Analog Input +#define TEMP_0_PIN 7 // Analog Input -#define HEATER_BED_PIN 8 -#define TEMP_BED_PIN 6 +#define HEATER_BED_PIN 8 +#define TEMP_BED_PIN 6 #if HAS_GRAPHICAL_LCD - #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 - #define LCD_PINS_RS 30 - #define LCD_PINS_ENABLE 20 - #define LCD_PINS_D4 25 - #define BEEPER_PIN 29 - #define BTN_EN1 19 - #define BTN_EN2 22 - #define BTN_ENC 24 - #define LCD_BACKLIGHT_PIN 6 + #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 + #define LCD_PINS_RS 30 + #define LCD_PINS_ENABLE 20 + #define LCD_PINS_D4 25 + #define BEEPER_PIN 29 + #define BTN_EN1 19 + #define BTN_EN2 22 + #define BTN_ENC 24 + #define LCD_BACKLIGHT_PIN 6 #if ENABLED(SILVER_GATE_GLCD_CONTROLLER) - #define KILL_PIN 21 - #define HOME_PIN 28 + #define KILL_PIN 21 + #define HOME_PIN 28 #endif #endif #endif -#define SD_DETECT_PIN 15 +#define SD_DETECT_PIN 15 -#define STAT_LED_RED_PIN 23 -#define STAT_LED_BLUE_PIN 26 -#define CASE_LIGHT_PIN 51 +#define STAT_LED_RED_PIN 23 +#define STAT_LED_BLUE_PIN 26 +#define CASE_LIGHT_PIN 51 diff --git a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h index c011d9daa7..6c53b7ea4e 100644 --- a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h +++ b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h @@ -36,76 +36,76 @@ // // Limit Switches // -#define X_STOP_PIN 19 -#define Y_STOP_PIN 18 -#define Z_STOP_PIN 38 +#define X_STOP_PIN 19 +#define Y_STOP_PIN 18 +#define Z_STOP_PIN 38 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 38 + #define Z_MIN_PROBE_PIN 38 #endif // // Steppers // -#define X_STEP_PIN 22 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 57 +#define X_STEP_PIN 22 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 57 -#define Y_STEP_PIN 25 -#define Y_DIR_PIN 26 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 25 +#define Y_DIR_PIN 26 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 29 -#define Z_DIR_PIN 39 -#define Z_ENABLE_PIN 28 +#define Z_STEP_PIN 29 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 28 -#define E0_STEP_PIN 55 -#define E0_DIR_PIN 56 -#define E0_ENABLE_PIN 54 +#define E0_STEP_PIN 55 +#define E0_DIR_PIN 56 +#define E0_ENABLE_PIN 54 // // Temperature Sensors // -#define TEMP_0_PIN 13 -#define TEMP_BED_PIN 14 +#define TEMP_0_PIN 13 +#define TEMP_BED_PIN 14 // // Heaters / Fans // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 44 -#define FAN_PIN 12 // IO pin. Buffer needed +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 44 +#define FAN_PIN 12 // IO pin. Buffer needed // // SD Card // -#define SD_DETECT_PIN -1 -#define SDSS 53 +#define SD_DETECT_PIN -1 +#define SDSS 53 // // Misc. Functions // -#define BEEPER_PIN 37 -#define KILL_PIN 64 +#define BEEPER_PIN 37 +#define KILL_PIN 64 // // LCD / Controller (Integrated MINIPANEL) // #if ENABLED(MINIPANEL) - #define DOGLCD_A0 40 - #define DOGLCD_CS 41 - #define LCD_BACKLIGHT_PIN 65 // Backlight LED on A11/D65 - #define LCD_RESET_PIN 27 + #define DOGLCD_A0 40 + #define DOGLCD_CS 41 + #define LCD_BACKLIGHT_PIN 65 // Backlight LED on A11/D65 + #define LCD_RESET_PIN 27 - #define BTN_EN1 2 - #define BTN_EN2 3 - #define BTN_ENC 5 + #define BTN_EN1 2 + #define BTN_EN2 3 + #define BTN_ENC 5 // This display has adjustable contrast - #define LCD_CONTRAST_MIN 0 - #define LCD_CONTRAST_MAX 255 - #define LCD_CONTRAST_INIT LCD_CONTRAST_MAX + #define LCD_CONTRAST_MIN 0 + #define LCD_CONTRAST_MAX 255 + #define LCD_CONTRAST_INIT LCD_CONTRAST_MAX #endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index 4cfa326165..430fa170e1 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -39,10 +39,10 @@ #endif // TMC2130 Diag Pins (currently just for reference) -#define X_DIAG_PIN 64 -#define Y_DIAG_PIN 69 -#define Z_DIAG_PIN 68 -#define E0_DIAG_PIN 65 +#define X_DIAG_PIN 64 +#define Y_DIAG_PIN 69 +#define Z_DIAG_PIN 68 +#define E0_DIAG_PIN 65 // // Limit Switches @@ -55,20 +55,20 @@ #if DISABLED(SENSORLESS_HOMING) - #define X_STOP_PIN 12 - #define Y_STOP_PIN 11 - #define Z_STOP_PIN 10 + #define X_STOP_PIN 12 + #define Y_STOP_PIN 11 + #define Z_STOP_PIN 10 #else - #define X_STOP_PIN X_DIAG_PIN - #define Y_STOP_PIN Y_DIAG_PIN + #define X_STOP_PIN X_DIAG_PIN + #define Y_STOP_PIN Y_DIAG_PIN #if ENABLED(BLTOUCH) - #define Z_STOP_PIN 11 // Y-MIN - #define SERVO0_PIN 10 // Z-MIN + #define Z_STOP_PIN 11 // Y-MIN + #define SERVO0_PIN 10 // Z-MIN #else - #define Z_STOP_PIN 10 + #define Z_STOP_PIN 10 #endif #endif @@ -77,104 +77,104 @@ // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 10 + #define Z_MIN_PROBE_PIN 10 #endif // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 49 -#define X_ENABLE_PIN 29 -#define X_CS_PIN 41 +#define X_STEP_PIN 37 +#define X_DIR_PIN 49 +#define X_ENABLE_PIN 29 +#define X_CS_PIN 41 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 48 -#define Y_ENABLE_PIN 28 -#define Y_CS_PIN 39 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 48 +#define Y_ENABLE_PIN 28 +#define Y_CS_PIN 39 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_ENABLE_PIN 27 -#define Z_CS_PIN 67 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 +#define Z_CS_PIN 67 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 -#define E0_CS_PIN 66 +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 +#define E0_CS_PIN 66 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 3 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 8 + #define FAN_PIN 8 #endif #ifndef FAN1_PIN - #define FAN1_PIN 6 + #define FAN1_PIN 6 #endif // // Misc. Functions // -#define SDSS 77 -#define LED_PIN 13 -#define CASE_LIGHT_PIN 9 +#define SDSS 77 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 9 // // M3/M4/M5 - Spindle/Laser Control // // use P1 connector for spindle pins -#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 18 // Pullup! -#define SPINDLE_DIR_PIN 19 +#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 18 // Pullup! +#define SPINDLE_DIR_PIN 19 // // Průša i3 MK2 Multiplexer Support // -#define E_MUX0_PIN 17 -#define E_MUX1_PIN 16 -#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 // // LCD / Controller // #if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL - #define KILL_PIN 32 + #define KILL_PIN 32 #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS 85 - #define LCD_PINS_ENABLE 71 - #define LCD_PINS_D4 70 - #define BTN_EN1 61 - #define BTN_EN2 59 + #define LCD_PINS_RS 85 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 70 + #define BTN_EN1 61 + #define BTN_EN2 59 #else - #define LCD_PINS_RS 82 - #define LCD_PINS_ENABLE 61 - #define LCD_PINS_D4 59 - #define LCD_PINS_D5 70 - #define LCD_PINS_D6 85 - #define LCD_PINS_D7 71 - #define BTN_EN1 14 - #define BTN_EN2 72 + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 61 + #define LCD_PINS_D4 59 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + #define BTN_EN1 14 + #define BTN_EN2 72 #endif - #define BTN_ENC 9 // AUX-2 - #define BEEPER_PIN 84 // AUX-4 - #define SD_DETECT_PIN 15 + #define BTN_ENC 9 // AUX-2 + #define BEEPER_PIN 84 // AUX-4 + #define SD_DETECT_PIN 15 #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index 2bc577313e..6e8463d0bd 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -39,10 +39,10 @@ #endif // TMC2130 Diag Pins -#define X_DIAG_PIN 64 -#define Y_DIAG_PIN 69 -#define Z_DIAG_PIN 68 -#define E0_DIAG_PIN 65 +#define X_DIAG_PIN 64 +#define Y_DIAG_PIN 69 +#define Z_DIAG_PIN 68 +#define E0_DIAG_PIN 65 // // Limit Switches @@ -55,141 +55,141 @@ #if DISABLED(SENSORLESS_HOMING) - #define X_MIN_PIN 12 // X- - #define Y_MIN_PIN 11 // Y- - #define Z_MIN_PIN 10 // Z- - #define X_MAX_PIN 81 // X+ - #define Y_MAX_PIN 57 // Y+ + #define X_MIN_PIN 12 // X- + #define Y_MIN_PIN 11 // Y- + #define Z_MIN_PIN 10 // Z- + #define X_MAX_PIN 81 // X+ + #define Y_MAX_PIN 57 // Y+ #else #if X_HOME_DIR < 0 - #define X_MIN_PIN X_DIAG_PIN - #define X_MAX_PIN 81 // X+ + #define X_MIN_PIN X_DIAG_PIN + #define X_MAX_PIN 81 // X+ #else - #define X_MIN_PIN 12 // X- - #define X_MAX_PIN X_DIAG_PIN + #define X_MIN_PIN 12 // X- + #define X_MAX_PIN X_DIAG_PIN #endif #if Y_HOME_DIR < 0 - #define Y_MIN_PIN Y_DIAG_PIN - #define Y_MAX_PIN 57 // Y+ + #define Y_MIN_PIN Y_DIAG_PIN + #define Y_MAX_PIN 57 // Y+ #else - #define Y_MIN_PIN 11 // Y- - #define Y_MAX_PIN Y_DIAG_PIN + #define Y_MIN_PIN 11 // Y- + #define Y_MAX_PIN Y_DIAG_PIN #endif #if ENABLED(BLTOUCH) - #define Z_MIN_PIN 11 // Y-MIN - #define SERVO0_PIN 10 // Z-MIN + #define Z_MIN_PIN 11 // Y-MIN + #define SERVO0_PIN 10 // Z-MIN #else - #define Z_MIN_PIN 10 + #define Z_MIN_PIN 10 #endif #endif -#define Z_MAX_PIN 7 +#define Z_MAX_PIN 7 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 10 + #define Z_MIN_PROBE_PIN 10 #endif // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 49 -#define X_ENABLE_PIN 29 -#define X_CS_PIN 41 +#define X_STEP_PIN 37 +#define X_DIR_PIN 49 +#define X_ENABLE_PIN 29 +#define X_CS_PIN 41 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 48 -#define Y_ENABLE_PIN 28 -#define Y_CS_PIN 39 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 48 +#define Y_ENABLE_PIN 28 +#define Y_CS_PIN 39 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_ENABLE_PIN 27 -#define Z_CS_PIN 67 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 +#define Z_CS_PIN 67 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 -#define E0_CS_PIN 66 +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 +#define E0_CS_PIN 66 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 3 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 8 + #define FAN_PIN 8 #endif -#define FAN1_PIN 6 +#define FAN1_PIN 6 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define CASE_LIGHT_PIN 9 +#define SDSS 53 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 9 // // M3/M4/M5 - Spindle/Laser Control // // use P1 connector for spindle pins -#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 18 // Pullup! -#define SPINDLE_DIR_PIN 19 +#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 18 // Pullup! +#define SPINDLE_DIR_PIN 19 // // Průša i3 MK2 Multiplexer Support // -#define E_MUX0_PIN 17 -#define E_MUX1_PIN 16 -#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 // // LCD / Controller // #if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE) - #define KILL_PIN 32 + #define KILL_PIN 32 #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE) #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS 85 - #define LCD_PINS_ENABLE 71 - #define LCD_PINS_D4 70 - #define BTN_EN1 18 - #define BTN_EN2 19 + #define LCD_PINS_RS 85 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 70 + #define BTN_EN1 18 + #define BTN_EN2 19 #else - #define LCD_PINS_RS 82 - #define LCD_PINS_ENABLE 18 // On 0.6b, use 61 - #define LCD_PINS_D4 19 // On 0.6b, use 59 - #define LCD_PINS_D5 70 - #define LCD_PINS_D6 85 - #define LCD_PINS_D7 71 - #define BTN_EN1 14 - #define BTN_EN2 72 + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 18 // On 0.6b, use 61 + #define LCD_PINS_D4 19 // On 0.6b, use 59 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 + #define BTN_EN1 14 + #define BTN_EN2 72 #endif - #define BTN_ENC 9 // AUX-2 - #define BEEPER_PIN 84 // AUX-4 + #define BTN_ENC 9 // AUX-2 + #define BEEPER_PIN 84 // AUX-4 - #define SD_DETECT_PIN 15 + #define SD_DETECT_PIN 15 #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index 50aec546a6..18bc3ddd16 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -38,104 +38,104 @@ // // Limit Switches // -#define X_MIN_PIN 12 -#define X_MAX_PIN 30 -#define Y_MIN_PIN 11 -#define Y_MAX_PIN 24 -#define Z_MIN_PIN 10 -#define Z_MAX_PIN 23 +#define X_MIN_PIN 12 +#define X_MAX_PIN 30 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 24 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 23 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 23 + #define Z_MIN_PROBE_PIN 23 #endif // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 48 -#define X_ENABLE_PIN 29 +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 49 -#define Y_ENABLE_PIN 28 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_ENABLE_PIN 27 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 // Microstepping pins - Mapping not from fastio.h (?) -#define X_MS1_PIN 40 -#define X_MS2_PIN 41 -#define Y_MS1_PIN 69 -#define Y_MS2_PIN 39 -#define Z_MS1_PIN 68 -#define Z_MS2_PIN 67 -#define E0_MS1_PIN 65 -#define E0_MS2_PIN 66 +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 -#define MOTOR_CURRENT_PWM_XY_PIN 46 -#define MOTOR_CURRENT_PWM_Z_PIN 45 -#define MOTOR_CURRENT_PWM_E_PIN 44 +#define MOTOR_CURRENT_PWM_XY_PIN 46 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 44 // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #ifndef MOTOR_CURRENT_PWM_RANGE - #define MOTOR_CURRENT_PWM_RANGE 2000 + #define MOTOR_CURRENT_PWM_RANGE 2000 #endif #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 3 -#define HEATER_1_PIN 7 +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 7 #if !MB(MINIRAMBO_10A) - #define HEATER_2_PIN 6 + #define HEATER_2_PIN 6 #endif -#define HEATER_BED_PIN 4 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 8 + #define FAN_PIN 8 #endif -#define FAN1_PIN 6 +#define FAN1_PIN 6 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 +#define SDSS 53 +#define LED_PIN 13 #if !MB(MINIRAMBO_10A) - #define CASE_LIGHT_PIN 9 + #define CASE_LIGHT_PIN 9 #endif // // M3/M4/M5 - Spindle/Laser Control // // use P1 connector for spindle pins -#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 18 // Pullup! -#define SPINDLE_DIR_PIN 19 +#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 18 // Pullup! +#define SPINDLE_DIR_PIN 19 // // Průša i3 MK2 Multiplexer Support // -#define E_MUX0_PIN 17 -#define E_MUX1_PIN 16 +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 #if !MB(MINIRAMBO_10A) - #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 + #define E_MUX2_PIN 78 // 84 in MK2 Firmware, with BEEPER as 78 #endif // @@ -144,46 +144,46 @@ #if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL #if !MB(MINIRAMBO_10A) - #define KILL_PIN 32 + #define KILL_PIN 32 #endif #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL #if MB(MINIRAMBO_10A) - #define BEEPER_PIN 78 + #define BEEPER_PIN 78 - #define BTN_EN1 80 - #define BTN_EN2 73 - #define BTN_ENC 21 + #define BTN_EN1 80 + #define BTN_EN2 73 + #define BTN_ENC 21 - #define LCD_PINS_RS 38 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 14 - #define LCD_PINS_D5 15 - #define LCD_PINS_D6 32 - #define LCD_PINS_D7 31 + #define LCD_PINS_RS 38 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 14 + #define LCD_PINS_D5 15 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 31 - #define SD_DETECT_PIN 72 + #define SD_DETECT_PIN 72 - #else // !MINIRAMBO_10A + #else // !MINIRAMBO_10A // AUX-4 - #define BEEPER_PIN 84 + #define BEEPER_PIN 84 // AUX-2 - #define BTN_EN1 14 - #define BTN_EN2 72 - #define BTN_ENC 9 + #define BTN_EN1 14 + #define BTN_EN2 72 + #define BTN_ENC 9 - #define LCD_PINS_RS 82 - #define LCD_PINS_ENABLE 18 - #define LCD_PINS_D4 19 - #define LCD_PINS_D5 70 - #define LCD_PINS_D6 85 - #define LCD_PINS_D7 71 + #define LCD_PINS_RS 82 + #define LCD_PINS_ENABLE 18 + #define LCD_PINS_D4 19 + #define LCD_PINS_D5 70 + #define LCD_PINS_D6 85 + #define LCD_PINS_D7 71 - #define SD_DETECT_PIN 15 + #define SD_DETECT_PIN 15 #endif // !MINIRAMBO_10A diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 2e52e9427c..0a443cc19a 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -50,64 +50,64 @@ // // Servos // -#define SERVO0_PIN 22 // Motor header MX1 -#define SERVO1_PIN 23 // Motor header MX2 -#define SERVO2_PIN 24 // Motor header MX3 -#define SERVO3_PIN 5 // PWM header pin 5 +#define SERVO0_PIN 22 // Motor header MX1 +#define SERVO1_PIN 23 // Motor header MX2 +#define SERVO2_PIN 24 // Motor header MX3 +#define SERVO3_PIN 5 // PWM header pin 5 // // Limit Switches // -#define X_MIN_PIN 12 -#define X_MAX_PIN 24 -#define Y_MIN_PIN 11 -#define Y_MAX_PIN 23 -#define Z_MIN_PIN 10 -#define Z_MAX_PIN 30 +#define X_MIN_PIN 12 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 23 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 30 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 30 + #define Z_MIN_PROBE_PIN 30 #endif // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 48 -#define X_ENABLE_PIN 29 +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 49 -#define Y_ENABLE_PIN 28 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_ENABLE_PIN 27 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 -#define E1_STEP_PIN 33 -#define E1_DIR_PIN 42 -#define E1_ENABLE_PIN 25 +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 42 +#define E1_ENABLE_PIN 25 // Microstepping pins - Mapping not from fastio.h (?) -#define X_MS1_PIN 40 -#define X_MS2_PIN 41 -#define Y_MS1_PIN 69 -#define Y_MS2_PIN 39 -#define Z_MS1_PIN 68 -#define Z_MS2_PIN 67 -#define E0_MS1_PIN 65 -#define E0_MS2_PIN 66 -#define E1_MS1_PIN 63 -#define E1_MS2_PIN 64 +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 +#define E1_MS1_PIN 63 +#define E1_MS2_PIN 64 -#define DIGIPOTSS_PIN 38 +#define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS { 4,5,3,0,1 } // X Y Z E0 E1 digipot channels to stepper driver mapping #ifndef DIGIPOT_MOTOR_CURRENT #define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) @@ -116,122 +116,122 @@ // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 7 -#define HEATER_2_PIN 6 -#define HEATER_BED_PIN 3 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 6 +#define HEATER_BED_PIN 3 #ifndef FAN_PIN - #define FAN_PIN 8 + #define FAN_PIN 8 #endif -#define FAN1_PIN 6 -#define FAN2_PIN 2 +#define FAN1_PIN 6 +#define FAN2_PIN 2 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 4 -#define CASE_LIGHT_PIN 46 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 4 +#define CASE_LIGHT_PIN 46 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 3 // Analog Input + #define FILWIDTH_PIN 3 // Analog Input #endif // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 31 // Pullup! -#define SPINDLE_DIR_PIN 32 +#define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 31 // Pullup! +#define SPINDLE_DIR_PIN 32 // // M7/M8/M9 - Coolant Control // -#define COOLANT_MIST_PIN 22 -#define COOLANT_FLOOD_PIN 44 +#define COOLANT_MIST_PIN 22 +#define COOLANT_FLOOD_PIN 44 // // Průša i3 MK2 Multiplexer Support // -#define E_MUX0_PIN 17 -#define E_MUX1_PIN 16 -#define E_MUX2_PIN 84 // 84 in MK2 Firmware +#define E_MUX0_PIN 17 +#define E_MUX1_PIN 16 +#define E_MUX2_PIN 84 // 84 in MK2 Firmware // // LCD / Controller // #if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL - #define KILL_PIN 80 + #define KILL_PIN 80 #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL - #define LCD_PINS_RS 70 - #define LCD_PINS_ENABLE 71 - #define LCD_PINS_D4 72 - #define LCD_PINS_D5 73 - #define LCD_PINS_D6 74 - #define LCD_PINS_D7 75 + #define LCD_PINS_RS 70 + #define LCD_PINS_ENABLE 71 + #define LCD_PINS_D4 72 + #define LCD_PINS_D5 73 + #define LCD_PINS_D6 74 + #define LCD_PINS_D7 75 #if ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 44 + #define BEEPER_PIN 44 // NB: Panucatt's Viki 2.0 wiring diagram (v1.2) indicates that the // beeper/buzzer is connected to pin 33; however, the pin used in the // diagram is actually pin 44, so this is correct. - #define DOGLCD_A0 70 - #define DOGLCD_CS 71 + #define DOGLCD_A0 70 + #define DOGLCD_CS 71 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 85 - #define BTN_EN2 84 - #define BTN_ENC 83 + #define BTN_EN1 85 + #define BTN_EN2 84 + #define BTN_ENC 83 - #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board + #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board - #define STAT_LED_RED_PIN 22 - #define STAT_LED_BLUE_PIN 32 + #define STAT_LED_RED_PIN 22 + #define STAT_LED_BLUE_PIN 32 - #else // !VIKI2 && !miniVIKI + #else // !VIKI2 && !miniVIKI - #define BEEPER_PIN 79 // AUX-4 + #define BEEPER_PIN 79 // AUX-4 // AUX-2 - #define BTN_EN1 76 - #define BTN_EN2 77 - #define BTN_ENC 78 + #define BTN_EN1 76 + #define BTN_EN2 77 + #define BTN_ENC 78 - #define SD_DETECT_PIN 81 + #define SD_DETECT_PIN 81 #endif // !VIKI2 && !miniVIKI - #else // !NEWPANEL - old style panel with shift register + #else // !NEWPANEL - old style panel with shift register // No Beeper added - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 - #define LCD_PINS_RS 75 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + #define LCD_PINS_RS 75 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 #endif // !NEWPANEL diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h index 2bb6e9b979..49237c7062 100644 --- a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h +++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h @@ -34,126 +34,126 @@ // // Servos // -#define SERVO0_PIN 22 // Motor header MX1 -#define SERVO1_PIN 23 // Motor header MX2 -#define SERVO2_PIN 24 // Motor header MX3 -#define SERVO3_PIN 5 // PWM header pin 5 +#define SERVO0_PIN 22 // Motor header MX1 +#define SERVO1_PIN 23 // Motor header MX2 +#define SERVO2_PIN 24 // Motor header MX3 +#define SERVO3_PIN 5 // PWM header pin 5 // // Limit Switches // -#define X_MIN_PIN 12 -#define X_MAX_PIN 24 -#define Y_MIN_PIN 11 -#define Y_MAX_PIN 23 -#define Z_MIN_PIN 10 -#define Z_MAX_PIN 30 +#define X_MIN_PIN 12 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 11 +#define Y_MAX_PIN 23 +#define Z_MIN_PIN 10 +#define Z_MAX_PIN 30 // // Z Probe (when not Z_MIN_IN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 30 + #define Z_MIN_PROBE_PIN 30 #endif // // Steppers // -#define X_STEP_PIN 37 -#define X_DIR_PIN 48 -#define X_ENABLE_PIN 29 +#define X_STEP_PIN 37 +#define X_DIR_PIN 48 +#define X_ENABLE_PIN 29 -#define Y_STEP_PIN 36 -#define Y_DIR_PIN 49 -#define Y_ENABLE_PIN 28 +#define Y_STEP_PIN 36 +#define Y_DIR_PIN 49 +#define Y_ENABLE_PIN 28 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 47 -#define Z_ENABLE_PIN 27 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 47 +#define Z_ENABLE_PIN 27 -#define E0_STEP_PIN 34 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 26 +#define E0_STEP_PIN 34 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 26 -#define E1_STEP_PIN 33 -#define E1_DIR_PIN 42 -#define E1_ENABLE_PIN 25 +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 42 +#define E1_ENABLE_PIN 25 // Microstepping pins - Mapping not from fastio.h (?) -#define X_MS1_PIN 40 -#define X_MS2_PIN 41 -#define Y_MS1_PIN 69 -#define Y_MS2_PIN 39 -#define Z_MS1_PIN 68 -#define Z_MS2_PIN 67 -#define E0_MS1_PIN 65 -#define E0_MS2_PIN 66 -#define E1_MS1_PIN 63 -#define E1_MS2_PIN 64 +#define X_MS1_PIN 40 +#define X_MS2_PIN 41 +#define Y_MS1_PIN 69 +#define Y_MS2_PIN 39 +#define Z_MS1_PIN 68 +#define Z_MS2_PIN 67 +#define E0_MS1_PIN 65 +#define E0_MS2_PIN 66 +#define E1_MS1_PIN 63 +#define E1_MS2_PIN 64 -#define DIGIPOTSS_PIN 38 +#define DIGIPOTSS_PIN 38 #define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_BED_PIN 7 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_BED_PIN 7 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 7 -#define HEATER_BED_PIN 3 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 3 #ifndef FAN_PIN - #define FAN_PIN 8 + #define FAN_PIN 8 #endif -#define FAN1_PIN 6 -#define FAN2_PIN 2 +#define FAN1_PIN 6 +#define FAN2_PIN 2 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 4 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 4 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 3 // Analog Input + #define FILWIDTH_PIN 3 // Analog Input #endif // // LCD / Controller // -#define LCD_PINS_RS 70 // Ext2_5 -#define LCD_PINS_ENABLE 71 // Ext2_7 -#define LCD_PINS_D4 72 // Ext2_9 ? -#define LCD_PINS_D5 73 // Ext2_11 ? -#define LCD_PINS_D6 74 // Ext2_13 -#define LCD_PINS_D7 75 // Ext2_15 ? -#define BEEPER_PIN -1 +#define LCD_PINS_RS 70 // Ext2_5 +#define LCD_PINS_ENABLE 71 // Ext2_7 +#define LCD_PINS_D4 72 // Ext2_9 ? +#define LCD_PINS_D5 73 // Ext2_11 ? +#define LCD_PINS_D6 74 // Ext2_13 +#define LCD_PINS_D7 75 // Ext2_15 ? +#define BEEPER_PIN -1 -#define BTN_HOME 80 // Ext_16 -#define BTN_CENTER 81 // Ext_14 -#define BTN_ENC BTN_CENTER -#define BTN_RIGHT 82 // Ext_12 -#define BTN_LEFT 83 // Ext_10 -#define BTN_UP 84 // Ext2_8 -#define BTN_DOWN 85 // Ext2_6 +#define BTN_HOME 80 // Ext_16 +#define BTN_CENTER 81 // Ext_14 +#define BTN_ENC BTN_CENTER +#define BTN_RIGHT 82 // Ext_12 +#define BTN_LEFT 83 // Ext_10 +#define BTN_UP 84 // Ext2_8 +#define BTN_DOWN 85 // Ext2_6 -#define HOME_PIN BTN_HOME +#define HOME_PIN BTN_HOME #if ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 44 + #define BEEPER_PIN 44 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 70 - #define DOGLCD_CS 71 + #define DOGLCD_A0 70 + #define DOGLCD_CS 71 #define LCD_SCREEN_ROT_180 - #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board + #define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board - #define STAT_LED_RED_PIN 22 - #define STAT_LED_BLUE_PIN 32 + #define STAT_LED_RED_PIN 22 + #define STAT_LED_BLUE_PIN 32 #endif // VIKI2/miniVIKI diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h index 3f537a6663..69d2ac2088 100644 --- a/Marlin/src/pins/ramps/pins_3DRAG.h +++ b/Marlin/src/pins/ramps/pins_3DRAG.h @@ -40,11 +40,11 @@ // // Heaters / Fans // -#define RAMPS_D8_PIN 9 -#define RAMPS_D9_PIN 8 -#define MOSFET_D_PIN 12 +#define RAMPS_D8_PIN 9 +#define RAMPS_D9_PIN 8 +#define MOSFET_D_PIN 12 -#define CASE_LIGHT_PIN -1 // Hardware PWM but one is not available on expansion header +#define CASE_LIGHT_PIN -1 // Hardware PWM but one is not available on expansion header #include "pins_RAMPS.h" @@ -57,21 +57,21 @@ // Steppers // #undef Z_ENABLE_PIN -#define Z_ENABLE_PIN 63 +#define Z_ENABLE_PIN 63 // // Heaters / Fans // -#define HEATER_2_PIN 6 +#define HEATER_2_PIN 6 // // Misc. Functions // #undef SDSS -#define SDSS 25 +#define SDSS 25 #undef SD_DETECT_PIN -#define SD_DETECT_PIN 53 +#define SD_DETECT_PIN 53 // // LCD / Controller @@ -85,24 +85,24 @@ #undef LCD_PINS_D5 #undef LCD_PINS_D6 #undef LCD_PINS_D7 - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 37 - #define LCD_PINS_D5 35 - #define LCD_PINS_D6 33 - #define LCD_PINS_D7 31 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 35 + #define LCD_PINS_D6 33 + #define LCD_PINS_D7 31 // Buttons #undef BTN_EN1 #undef BTN_EN2 #undef BTN_ENC - #define BTN_EN1 16 - #define BTN_EN2 17 - #define BTN_ENC 23 + #define BTN_EN1 16 + #define BTN_EN2 17 + #define BTN_ENC 23 #else - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #endif // HAS_SPI_LCD && NEWPANEL @@ -137,7 +137,7 @@ * * Note: Socket names vary from vendor to vendor */ -#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not good with 3DRAG +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not good with 3DRAG #undef SPINDLE_LASER_ENA_PIN #undef SPINDLE_DIR_PIN @@ -149,14 +149,14 @@ #undef Z_DIR_PIN #undef Z_ENABLE_PIN #undef Z_STEP_PIN - #define Z_DIR_PIN 28 - #define Z_ENABLE_PIN 24 - #define Z_STEP_PIN 26 - #define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 62 // Pullup! - #define SPINDLE_DIR_PIN 48 - #elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use - #define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown! - #define SPINDLE_DIR_PIN 17 + #define Z_DIR_PIN 28 + #define Z_ENABLE_PIN 24 + #define Z_STEP_PIN 26 + #define SPINDLE_LASER_PWM_PIN 46 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 62 // Pullup! + #define SPINDLE_DIR_PIN 48 + #elif !BOTH(ULTRA_LCD, NEWPANEL) // use expansion header if no LCD in use + #define SPINDLE_LASER_ENA_PIN 16 // Pullup or pulldown! + #define SPINDLE_DIR_PIN 17 #endif #endif diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h index 99b75d5e00..a38e4e1b43 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3.h @@ -32,15 +32,15 @@ #endif #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) - #define CASE_LIGHT_PIN 6 // Define before RAMPS pins include + #define CASE_LIGHT_PIN 6 // Define before RAMPS pins include #endif #define BOARD_INFO_NAME "Azteeg X3" // // Servos // -#define SERVO0_PIN 44 // SERVO1 port -#define SERVO1_PIN 55 // SERVO2 port +#define SERVO0_PIN 44 // SERVO1 port +#define SERVO1_PIN 55 // SERVO2 port #include "pins_RAMPS_13.h" @@ -55,17 +55,17 @@ #undef DOGLCD_A0 #undef DOGLCD_CS #undef BTN_ENC - #define DOGLCD_A0 31 - #define DOGLCD_CS 32 - #define BTN_ENC 12 + #define DOGLCD_A0 31 + #define DOGLCD_CS 32 + #define BTN_ENC 12 - #define STAT_LED_RED_PIN 64 - #define STAT_LED_BLUE_PIN 63 + #define STAT_LED_RED_PIN 64 + #define STAT_LED_BLUE_PIN 63 #else - #define STAT_LED_RED_PIN 6 - #define STAT_LED_BLUE_PIN 11 + #define STAT_LED_RED_PIN 6 + #define STAT_LED_BLUE_PIN 11 #endif @@ -79,18 +79,18 @@ // // M3/M4/M5 - Spindle/Laser Control // -#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3 board #undef SPINDLE_LASER_ENA_PIN #undef SPINDLE_DIR_PIN #if HAS_CUTTER - #undef SDA // use EXP3 header + #undef SDA // use EXP3 header #undef SCL #if SERVO0_PIN == 7 #undef SERVO0_PIN - #define SERVO0_PIN 11 + #define SERVO0_PIN 11 #endif - #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 20 // Pullup! - #define SPINDLE_DIR_PIN 21 + #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 20 // Pullup! + #define SPINDLE_DIR_PIN 21 #endif diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h index 627eaabfd6..c8e2a6683d 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -43,21 +43,21 @@ // Tested this pin with bed leveling on a Delta with 1 servo. // Physical wire attachment on EXT1: GND, 5V, D47. // -#define SERVO0_PIN 47 +#define SERVO0_PIN 47 // // Limit Switches // -#define X_STOP_PIN 3 -#define Y_STOP_PIN 14 -#define Z_STOP_PIN 18 +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 +#define Z_STOP_PIN 18 #ifndef FAN_PIN - #define FAN_PIN 6 + #define FAN_PIN 6 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) - #define CASE_LIGHT_PIN 44 + #define CASE_LIGHT_PIN 44 #endif // @@ -67,100 +67,100 @@ // DIGIPOT slave addresses #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT 0x2C (0x58 <- 0x2C << 1) #endif #ifndef DIGIPOT_I2C_ADDRESS_B - #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) + #define DIGIPOT_I2C_ADDRESS_B 0x2E // unshifted slave address for second DIGIPOT 0x2E (0x5C <- 0x2E << 1) #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 18 + #define Z_MIN_PROBE_PIN 18 #endif // // Steppers // -#define E2_STEP_PIN 23 -#define E2_DIR_PIN 25 -#define E2_ENABLE_PIN 40 +#define E2_STEP_PIN 23 +#define E2_DIR_PIN 25 +#define E2_ENABLE_PIN 40 -#define E3_STEP_PIN 27 -#define E3_DIR_PIN 29 -#define E3_ENABLE_PIN 41 +#define E3_STEP_PIN 27 +#define E3_DIR_PIN 29 +#define E3_ENABLE_PIN 41 -#define E4_STEP_PIN 43 -#define E4_DIR_PIN 37 -#define E4_ENABLE_PIN 42 +#define E4_STEP_PIN 43 +#define E4_DIR_PIN 37 +#define E4_ENABLE_PIN 42 // // Temperature Sensors // -#define TEMP_2_PIN 12 // Analog Input -#define TEMP_3_PIN 11 // Analog Input -#define TEMP_4_PIN 10 // Analog Input -#define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro) -#define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro) +#define TEMP_2_PIN 12 // Analog Input +#define TEMP_3_PIN 11 // Analog Input +#define TEMP_4_PIN 10 // Analog Input +#define TC1 4 // Analog Input (Thermo couple on Azteeg X3Pro) +#define TC2 5 // Analog Input (Thermo couple on Azteeg X3Pro) // // Heaters / Fans // -#define HEATER_2_PIN 16 -#define HEATER_3_PIN 17 -#define HEATER_4_PIN 4 -#define HEATER_5_PIN 5 -#define HEATER_6_PIN 6 -#define HEATER_7_PIN 11 +#define HEATER_2_PIN 16 +#define HEATER_3_PIN 17 +#define HEATER_4_PIN 4 +#define HEATER_5_PIN 5 +#define HEATER_6_PIN 6 +#define HEATER_7_PIN 11 #ifndef CONTROLLER_FAN_PIN - #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) + #define CONTROLLER_FAN_PIN 4 // Pin used for the fan to cool motherboard (-1 to disable) #endif // Fans/Water Pump to cool the hotend cool side. -#define ORIG_E0_AUTO_FAN_PIN 5 -#define ORIG_E1_AUTO_FAN_PIN 5 -#define ORIG_E2_AUTO_FAN_PIN 5 -#define ORIG_E3_AUTO_FAN_PIN 5 +#define ORIG_E0_AUTO_FAN_PIN 5 +#define ORIG_E1_AUTO_FAN_PIN 5 +#define ORIG_E2_AUTO_FAN_PIN 5 +#define ORIG_E3_AUTO_FAN_PIN 5 // // LCD / Controller // #undef BEEPER_PIN -#define BEEPER_PIN 33 +#define BEEPER_PIN 33 #if ANY(VIKI2, miniVIKI) #undef SD_DETECT_PIN - #define SD_DETECT_PIN 49 // For easy adapter board + #define SD_DETECT_PIN 49 // For easy adapter board #undef BEEPER_PIN - #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display + #define BEEPER_PIN 12 // 33 isn't physically available to the LCD display #else - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 #endif // // Misc. Functions // #if ENABLED(CASE_LIGHT_ENABLE) && PIN_EXISTS(CASE_LIGHT) && defined(DOGLCD_A0) && DOGLCD_A0 == CASE_LIGHT_PIN - #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it - #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments + #undef DOGLCD_A0 // Steal pin 44 for the case light; if you have a Viki2 and have connected it + #define DOGLCD_A0 57 // following the Panucatt wiring diagram, you may need to tweak these pin assignments // as the wiring diagram uses pin 44 for DOGLCD_A0 #endif // // M3/M4/M5 - Spindle/Laser Control // -#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3pro board +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are no good with the AzteegX3pro board #undef SPINDLE_LASER_ENA_PIN #undef SPINDLE_DIR_PIN -#if HAS_CUTTER // EXP2 header +#if HAS_CUTTER // EXP2 header #if ANY(VIKI2, miniVIKI) - #define BTN_EN2 31 // Pin 7 needed for Spindle PWM + #define BTN_EN2 31 // Pin 7 needed for Spindle PWM #endif - #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 20 // Pullup! - #define SPINDLE_DIR_PIN 21 + #define SPINDLE_LASER_PWM_PIN 7 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 20 // Pullup! + #define SPINDLE_DIR_PIN 21 #endif diff --git a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h index 9945c94d76..1aa9b67f7c 100644 --- a/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h +++ b/Marlin/src/pins/ramps/pins_BAM_DICE_DUE.h @@ -34,9 +34,9 @@ // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 66 // Pullup or pulldown! -#define SPINDLE_DIR_PIN 67 -#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 66 // Pullup or pulldown! +#define SPINDLE_DIR_PIN 67 +#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM #include "pins_RAMPS.h" @@ -45,5 +45,5 @@ // #undef TEMP_0_PIN #undef TEMP_1_PIN -#define TEMP_0_PIN 9 // Analog Input -#define TEMP_1_PIN 11 // Analog Input +#define TEMP_0_PIN 9 // Analog Input +#define TEMP_1_PIN 11 // Analog Input diff --git a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h index bf75c1a2a2..44b6ff1e61 100644 --- a/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h +++ b/Marlin/src/pins/ramps/pins_BQ_ZUM_MEGA_3D.h @@ -34,30 +34,30 @@ // // Heaters / Fans // -#define RAMPS_D8_PIN 10 -#define RAMPS_D9_PIN 12 -#define RAMPS_D10_PIN 9 -#define MOSFET_D_PIN 7 +#define RAMPS_D8_PIN 10 +#define RAMPS_D9_PIN 12 +#define RAMPS_D10_PIN 9 +#define MOSFET_D_PIN 7 // // Auto fans // -#define ORIG_E0_AUTO_FAN_PIN 11 -#define ORIG_E1_AUTO_FAN_PIN 6 -#define ORIG_E2_AUTO_FAN_PIN 6 -#define ORIG_E3_AUTO_FAN_PIN 6 +#define ORIG_E0_AUTO_FAN_PIN 11 +#define ORIG_E1_AUTO_FAN_PIN 6 +#define ORIG_E2_AUTO_FAN_PIN 6 +#define ORIG_E3_AUTO_FAN_PIN 6 // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! -#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM -#define SPINDLE_DIR_PIN 42 +#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM +#define SPINDLE_DIR_PIN 42 // // Limit Switches // -#define X_MAX_PIN 79 // 2 +#define X_MAX_PIN 79 // 2 // // Import RAMPS 1.3 pins @@ -68,34 +68,33 @@ // Z Probe (when not Z_MIN_PIN) // #undef Z_MIN_PROBE_PIN -#define Z_MIN_PROBE_PIN 19 // IND_S_5V +#define Z_MIN_PROBE_PIN 19 // IND_S_5V #undef Z_ENABLE_PIN -#define Z_ENABLE_PIN 77 // 62 +#define Z_ENABLE_PIN 77 // 62 // // Steppers // -#define DIGIPOTSS_PIN 22 +#define DIGIPOTSS_PIN 22 #define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 } // // Temperature Sensors // #undef TEMP_1_PIN -#define TEMP_1_PIN 14 // Analog Input (15) +#define TEMP_1_PIN 14 // Analog Input (15) #undef TEMP_BED_PIN -#define TEMP_BED_PIN 15 // Analog Input (14) +#define TEMP_BED_PIN 15 // Analog Input (14) // // Misc. Functions // -#undef PS_ON_PIN // 12 -#define PS_ON_PIN 81 // External Power Supply - -#define CASE_LIGHT_PIN 44 // Hardware PWM +#undef PS_ON_PIN // 12 +#define PS_ON_PIN 81 // External Power Supply +#define CASE_LIGHT_PIN 44 // Hardware PWM // This board has headers for Z-min, Z-max and IND_S_5V *but* as the bq team // decided to ship the printer only with the probe and no additional Z-min @@ -104,8 +103,8 @@ #ifdef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN #undef Z_MIN_PIN #undef Z_MAX_PIN - #define Z_MIN_PIN 19 // IND_S_5V - #define Z_MAX_PIN 18 // Z-MIN Label + #define Z_MIN_PIN 19 // IND_S_5V + #define Z_MAX_PIN 18 // Z-MIN Label #endif // @@ -113,5 +112,5 @@ // #if ENABLED(HEPHESTOS2_HEATED_BED_KIT) #undef HEATER_BED_PIN - #define HEATER_BED_PIN 8 + #define HEATER_BED_PIN 8 #endif diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h index 6a98973347..9ff9d3be62 100644 --- a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -34,68 +34,68 @@ // // Limit Switches // -#define X_STOP_PIN 54 // PF0 / A0 -#define Y_STOP_PIN 24 // PA2 / AD2 -#define Z_MIN_PIN 23 // PA1 / AD1 -#define Z_MAX_PIN 25 // PA3 / AD3 -#define SERVO0_PIN 40 // PG1 / !RD +#define X_STOP_PIN 54 // PF0 / A0 +#define Y_STOP_PIN 24 // PA2 / AD2 +#define Z_MIN_PIN 23 // PA1 / AD1 +#define Z_MAX_PIN 25 // PA3 / AD3 +#define SERVO0_PIN 40 // PG1 / !RD // // Steppers // -#define X_STEP_PIN 61 // PF7 / A7 -#define X_DIR_PIN 62 // PK0 / A8 -#define X_ENABLE_PIN 60 // PF6 / A6 +#define X_STEP_PIN 61 // PF7 / A7 +#define X_DIR_PIN 62 // PK0 / A8 +#define X_ENABLE_PIN 60 // PF6 / A6 -#define Y_STEP_PIN 64 // PK2 / A10 -#define Y_DIR_PIN 65 // PK3 / A11 -#define Y_ENABLE_PIN 63 // PK1 / A9 +#define Y_STEP_PIN 64 // PK2 / A10 +#define Y_DIR_PIN 65 // PK3 / A11 +#define Y_ENABLE_PIN 63 // PK1 / A9 -#define Z_STEP_PIN 67 // PK5 / A13 -#define Z_DIR_PIN 69 // PK7 / A15 -#define Z_ENABLE_PIN 66 // PK4 / A12 -#define Z_MIN_PROBE_PIN 25 // PA3 / AD3 +#define Z_STEP_PIN 67 // PK5 / A13 +#define Z_DIR_PIN 69 // PK7 / A15 +#define Z_ENABLE_PIN 66 // PK4 / A12 +#define Z_MIN_PROBE_PIN 25 // PA3 / AD3 -#define E0_STEP_PIN 58 // PF4 / A4 -#define E0_DIR_PIN 59 // PF5 / A5 -#define E0_ENABLE_PIN 57 // PF3 / A3 +#define E0_STEP_PIN 58 // PF4 / A4 +#define E0_DIR_PIN 59 // PF5 / A5 +#define E0_ENABLE_PIN 57 // PF3 / A3 // // Temperature Sensors // -#define TEMP_0_PIN 1 // PF1 / A1 Analog -#define TEMP_BED_PIN 14 // PK6 / A14 Analog +#define TEMP_0_PIN 1 // PF1 / A1 Analog +#define TEMP_BED_PIN 14 // PK6 / A14 Analog // // Heaters / Fans // -#define HEATER_0_PIN 4 // PG5 / PWM4 -#define HEATER_BED_PIN 3 // PE5 / PWM3 +#define HEATER_0_PIN 4 // PG5 / PWM4 +#define HEATER_BED_PIN 3 // PE5 / PWM3 -#define FAN_PIN 5 // PE3 / PWM5 +#define FAN_PIN 5 // PE3 / PWM5 // // Misc. Functions // -#define SDSS 53 // PB0 / SS -#define LED_PIN 13 // PB7 / PWM13 +#define SDSS 53 // PB0 / SS +#define LED_PIN 13 // PB7 / PWM13 -#define MISO_PIN 50 // PB3 -#define MOSI_PIN 51 // PB2 -#define SCK_PIN 52 // PB1 +#define MISO_PIN 50 // PB3 +#define MOSI_PIN 51 // PB2 +#define SCK_PIN 52 // PB1 // // LCDs and Controllers // #if HAS_SPI_LCD #if ENABLED(ZONESTAR_LCD) - #define LCD_PINS_RS 2 - #define LCD_PINS_ENABLE 36 - #define LCD_PINS_D4 37 - #define LCD_PINS_D5 34 - #define LCD_PINS_D6 35 - #define LCD_PINS_D7 32 - #define ADC_KEYPAD_PIN 12 // Analog + #define LCD_PINS_RS 2 + #define LCD_PINS_ENABLE 36 + #define LCD_PINS_D4 37 + #define LCD_PINS_D5 34 + #define LCD_PINS_D6 35 + #define LCD_PINS_D7 32 + #define ADC_KEYPAD_PIN 12 // Analog #endif #endif diff --git a/Marlin/src/pins/ramps/pins_FELIX2.h b/Marlin/src/pins/ramps/pins_FELIX2.h index f5a49db533..bfd341db6d 100644 --- a/Marlin/src/pins/ramps/pins_FELIX2.h +++ b/Marlin/src/pins/ramps/pins_FELIX2.h @@ -35,29 +35,29 @@ // Heaters / Fans // // Power outputs EFBF or EFBE -#define MOSFET_D_PIN 7 +#define MOSFET_D_PIN 7 #include "pins_RAMPS.h" // // Misc. Functions // -#define SDPOWER_PIN 1 +#define SDPOWER_PIN 1 -#define PS_ON_PIN 12 +#define PS_ON_PIN 12 // // LCD / Controller // #if BOTH(ULTRA_LCD, NEWPANEL) - #define SD_DETECT_PIN 6 + #define SD_DETECT_PIN 6 #endif // NEWPANEL && ULTRA_LCD // // M3/M4/M5 - Spindle/Laser Control // -#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not valid with this board +#undef SPINDLE_LASER_PWM_PIN // Definitions in pins_RAMPS.h are not valid with this board #undef SPINDLE_LASER_ENA_PIN #undef SPINDLE_DIR_PIN diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h index 3dcd7e57bc..75d647fed5 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -41,83 +41,83 @@ // // Servos // -#define SERVO0_PIN 11 -#define SERVO1_PIN 6 -#define SERVO2_PIN 5 +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 // // Limit Switches // -#define X_MIN_PIN 3 +#define X_MIN_PIN 3 #ifndef X_MAX_PIN - #define X_MAX_PIN 2 + #define X_MAX_PIN 2 #endif -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 53 + #define X_CS_PIN 53 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 49 + #define Y_CS_PIN 49 #endif -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN - #define Z_CS_PIN 40 + #define Z_CS_PIN 40 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 42 + #define E0_CS_PIN 42 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN 44 + #define E1_CS_PIN 44 #endif -#define E2_STEP_PIN 42 -#define E2_DIR_PIN 43 -#define E2_ENABLE_PIN 44 +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 // // Temperature Sensors // -#define TEMP_0_PIN 13 // Analog Input -#define TEMP_1_PIN 15 // Analog Input -#define TEMP_BED_PIN 14 // Analog Input +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // @@ -140,39 +140,39 @@ // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 7 -#define HEATER_BED_PIN 8 +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 8 #ifndef FAN_PIN - #define FAN_PIN 9 + #define FAN_PIN 9 #endif #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 57 + #define FIL_RUNOUT_PIN 57 #endif #if !HAS_FILAMENT_SENSOR - #define FAN1_PIN 4 + #define FAN1_PIN 4 #endif // // Misc. Functions // #ifndef SDSS - #define SDSS 53 + #define SDSS 53 #endif -#define LED_PIN 13 -#define LED4_PIN 5 +#define LED_PIN 13 +#define LED4_PIN 5 // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector -#define FILWIDTH_PIN 5 // Analog Input +#define FILWIDTH_PIN 5 // Analog Input #ifndef PS_ON_PIN - #define PS_ON_PIN 12 + #define PS_ON_PIN 12 #endif -#define CASE_LIGHT_PIN 5 +#define CASE_LIGHT_PIN 5 // // LCD / Controller @@ -180,16 +180,16 @@ // Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER // #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + #define BEEPER_PIN 37 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 #endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h index 3bbff7f8f2..3ed9fb9692 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h @@ -28,10 +28,10 @@ #define BOARD_INFO_NAME "Formbot Raptor2" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME -#define FAN_PIN 6 +#define FAN_PIN 6 #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 22 + #define FIL_RUNOUT_PIN 22 #endif #include "pins_FORMBOT_RAPTOR.h" @@ -42,22 +42,22 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) - #if !NUM_SERVOS // Try to use servo connector first - #define SPINDLE_LASER_ENA_PIN 6 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - #define SPINDLE_DIR_PIN 5 - #elif !GREEDY_PANEL // Try to use AUX2 - #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM - #define SPINDLE_DIR_PIN 65 + #if !NUM_SERVOS // Try to use servo connector first + #define SPINDLE_LASER_ENA_PIN 6 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif !GREEDY_PANEL // Try to use AUX2 + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 #endif #endif #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) - #if NUM_SERVOS <= 1 // Try to use servo connector first - #define CASE_LIGHT_PIN 6 // Hardware PWM - #elif !GREEDY_PANEL // Try to use AUX2 - #define CASE_LIGHT_PIN 44 // Hardware PWM + #if NUM_SERVOS <= 1 // Try to use servo connector first + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif !GREEDY_PANEL // Try to use AUX2 + #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index 1c911cd125..8fa3686514 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -37,84 +37,84 @@ // // Servos // -#define SERVO0_PIN 11 -#define SERVO1_PIN -1 // was 6 -#define SERVO2_PIN -1 // was 5 -#define SERVO3_PIN -1 +#define SERVO0_PIN 11 +#define SERVO1_PIN -1 // was 6 +#define SERVO2_PIN -1 // was 5 +#define SERVO3_PIN -1 // // Limit Switches // -#define X_MIN_PIN 3 +#define X_MIN_PIN 3 #ifndef X_MAX_PIN - #define X_MAX_PIN 2 + #define X_MAX_PIN 2 #endif -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 53 + #define X_CS_PIN 53 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 49 + #define Y_CS_PIN 49 #endif -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN - #define Z_CS_PIN 40 + #define Z_CS_PIN 40 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 42 + #define E0_CS_PIN 42 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN 44 + #define E1_CS_PIN 44 #endif -#define E2_STEP_PIN 42 -#define E2_DIR_PIN 43 -#define E2_ENABLE_PIN 44 +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 // // Temperature Sensors // -#define TEMP_0_PIN 13 // Analog Input -#define TEMP_1_PIN 15 // Analog Input -#define TEMP_BED_PIN 3 // Analog Input +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 3 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // @@ -137,36 +137,36 @@ // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 7 -#define HEATER_BED_PIN 58 +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 58 -#define FAN_PIN 9 +#define FAN_PIN 9 #if HAS_FILAMENT_SENSOR - #define FIL_RUNOUT_PIN 4 - //#define FIL_RUNOUT2_PIN -1 + #define FIL_RUNOUT_PIN 4 + //#define FIL_RUNOUT2_PIN -1 #else // Though defined as a fan pin, it is utilized as a dedicated laser pin by Formbot. - #define FAN1_PIN 4 + #define FAN1_PIN 4 #endif // // Misc. Functions // -#define SDSS 53 +#define SDSS 53 #ifndef LED_PIN - #define LED_PIN 13 // The Formbot v 1 board has almost no unassigned pins on it. The Board's LED + #define LED_PIN 13 // The Formbot v 1 board has almost no unassigned pins on it. The Board's LED #endif // is a good place to get a signal to control the Max7219 LED Matrix. // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector -#define FILWIDTH_PIN 5 // Analog Input +#define FILWIDTH_PIN 5 // Analog Input #ifndef PS_ON_PIN - #define PS_ON_PIN 12 + #define PS_ON_PIN 12 #endif -#define CASE_LIGHT_PIN 8 +#define CASE_LIGHT_PIN 8 // // LCD / Controller @@ -175,22 +175,22 @@ // #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #ifndef BEEPER_PIN - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #endif - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 // Allow MAX7219 to steal the KILL pin #if !defined(KILL_PIN) && MAX7219_CLK_PIN != 41 && MAX7219_DIN_PIN != 41 && MAX7219_LOAD_PIN != 41 - #define KILL_PIN 41 + #define KILL_PIN 41 #endif - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 #endif diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h index bdcb28dac2..3846a7649e 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h @@ -37,116 +37,114 @@ // // Servos // -#define SERVO0_PIN 11 -#define SERVO1_PIN -1 // was 6 -#define SERVO2_PIN -1 -#define SERVO3_PIN -1 +#define SERVO0_PIN 11 +#define SERVO1_PIN -1 // was 6 +#define SERVO2_PIN -1 +#define SERVO3_PIN -1 // // Limit Switches // -#define X_MIN_PIN 3 +#define X_MIN_PIN 3 #ifndef X_MAX_PIN - #define X_MAX_PIN 2 + #define X_MAX_PIN 2 #endif -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 53 + #define X_CS_PIN 53 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 49 + #define Y_CS_PIN 49 #endif -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN - #define Z_CS_PIN 40 + #define Z_CS_PIN 40 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 42 + #define E0_CS_PIN 42 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN 44 + #define E1_CS_PIN 44 #endif -#define E2_STEP_PIN 42 -#define E2_DIR_PIN 43 -#define E2_ENABLE_PIN 44 +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 43 +#define E2_ENABLE_PIN 44 // // Temperature Sensors // -#define TEMP_0_PIN 13 // Analog Input -#define TEMP_1_PIN 15 // Analog Input -#define TEMP_BED_PIN 14 // Analog Input +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_BED_PIN 14 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif - - // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 7 -#define HEATER_BED_PIN 8 +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_BED_PIN 8 -#define FAN_PIN 9 -#define FAN1_PIN 12 +#define FAN_PIN 9 +#define FAN1_PIN 12 -#define NUM_RUNOUT_SENSORS 2 -#define FIL_RUNOUT_PIN 22 -#define FIL_RUNOUT2_PIN 21 +#define NUM_RUNOUT_SENSORS 2 +#define FIL_RUNOUT_PIN 22 +#define FIL_RUNOUT2_PIN 21 // // Misc. Functions // -#define CASE_LIGHT_PIN 5 -#define SDSS 53 +#define CASE_LIGHT_PIN 5 +#define SDSS 53 #ifndef LED_PIN - #define LED_PIN 13 + #define LED_PIN 13 #endif -#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 4 // Pullup! +#define SPINDLE_LASER_PWM_PIN -1 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 4 // Pullup! // Use the RAMPS 1.4 Analog input 5 on the AUX2 connector -#define FILWIDTH_PIN 5 // Analog Input +#define FILWIDTH_PIN 5 // Analog Input // // LCD / Controller @@ -154,20 +152,20 @@ // Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER // #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 #ifndef KILL_PIN - #define KILL_PIN 41 + #define KILL_PIN 41 #endif #ifndef BEEPER_PIN - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #endif #endif diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h index 6b7f2d582b..19238bc5f8 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -33,83 +33,83 @@ #define BOARD_INFO_NAME "FYSETC F6 1.3" #endif -#define RESET_PIN 30 -#define SPI_FLASH_CS 83 +#define RESET_PIN 30 +#define SPI_FLASH_CS 83 // // Servos // -#define SERVO0_PIN 13 -#define SERVO1_PIN 11 // (PS_ON_PIN) -#define SERVO2_PIN 10 // (FIL_RUNOUT_PIN) -#define SERVO3_PIN 4 // (RGB_LED_G_PIN) +#define SERVO0_PIN 13 +#define SERVO1_PIN 11 // (PS_ON_PIN) +#define SERVO2_PIN 10 // (FIL_RUNOUT_PIN) +#define SERVO3_PIN 4 // (RGB_LED_G_PIN) // // Limit Switches // -#define X_MIN_PIN 63 -#define X_MAX_PIN 64 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 12 +#define X_MIN_PIN 63 +#define X_MAX_PIN 64 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 12 #ifndef Z_MAX_PIN - #define Z_MAX_PIN 9 + #define Z_MAX_PIN 9 #endif #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN SERVO2_PIN + #define FIL_RUNOUT_PIN SERVO2_PIN #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 9 // Servos pin + #define Z_MIN_PROBE_PIN 9 // Servos pin #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 70 + #define X_CS_PIN 70 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 39 + #define Y_CS_PIN 39 #endif -#define Z_STEP_PIN 43 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 58 +#define Z_STEP_PIN 43 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 58 #ifndef Z_CS_PIN - #define Z_CS_PIN 74 + #define Z_CS_PIN 74 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 47 + #define E0_CS_PIN 47 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN 32 + #define E1_CS_PIN 32 #endif -#define E2_STEP_PIN 59 -#define E2_DIR_PIN 57 -#define E2_ENABLE_PIN 40 +#define E2_STEP_PIN 59 +#define E2_DIR_PIN 57 +#define E2_ENABLE_PIN 40 #ifndef E2_CS_PIN - #define E2_CS_PIN 42 + #define E2_CS_PIN 42 #endif // @@ -125,76 +125,76 @@ * At the moment, F6 rx pins are not pc interrupt pins */ #ifndef X_SERIAL_RX_PIN - #define X_SERIAL_RX_PIN -1 // 71 + #define X_SERIAL_RX_PIN -1 // 71 #endif #ifndef X_SERIAL_TX_PIN - #define X_SERIAL_TX_PIN 72 + #define X_SERIAL_TX_PIN 72 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN -1 // 73 + #define Y_SERIAL_RX_PIN -1 // 73 #endif #ifndef Y_SERIAL_TX_PIN - #define Y_SERIAL_TX_PIN 75 + #define Y_SERIAL_TX_PIN 75 #endif #ifndef Z_SERIAL_RX_PIN - #define Z_SERIAL_RX_PIN -1 // 78 + #define Z_SERIAL_RX_PIN -1 // 78 #endif #ifndef Z_SERIAL_TX_PIN - #define Z_SERIAL_TX_PIN 79 + #define Z_SERIAL_TX_PIN 79 #endif #ifndef E0_SERIAL_RX_PIN - #define E0_SERIAL_RX_PIN -1 // 76 + #define E0_SERIAL_RX_PIN -1 // 76 #endif #ifndef E0_SERIAL_TX_PIN - #define E0_SERIAL_TX_PIN 77 + #define E0_SERIAL_TX_PIN 77 #endif #ifndef E1_SERIAL_RX_PIN - #define E1_SERIAL_RX_PIN -1 // 80 + #define E1_SERIAL_RX_PIN -1 // 80 #endif #ifndef E1_SERIAL_TX_PIN - #define E1_SERIAL_TX_PIN 81 + #define E1_SERIAL_TX_PIN 81 #endif #ifndef E2_SERIAL_RX_PIN - #define E2_SERIAL_RX_PIN -1 // 22 + #define E2_SERIAL_RX_PIN -1 // 22 #endif #ifndef E2_SERIAL_TX_PIN - #define E2_SERIAL_TX_PIN 82 + #define E2_SERIAL_TX_PIN 82 #endif #endif // // Temperature Sensors // -#define TEMP_0_PIN 12 // Analog Input -#define TEMP_1_PIN 13 // Analog Input -#define TEMP_2_PIN 14 // Analog Input -#define TEMP_BED_PIN 15 // Analog Input +#define TEMP_0_PIN 12 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_2_PIN 14 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 9 // Analog Input on X+ endstop + #define FILWIDTH_PIN 9 // Analog Input on X+ endstop #endif // // Heaters / Fans // -#define HEATER_0_PIN 5 -#define HEATER_1_PIN 6 -#define HEATER_2_PIN 7 -#define HEATER_BED_PIN 8 +#define HEATER_0_PIN 5 +#define HEATER_1_PIN 6 +#define HEATER_2_PIN 7 +#define HEATER_BED_PIN 8 -#define FAN_PIN 44 -#define FAN1_PIN 45 -#define FAN2_PIN 46 +#define FAN_PIN 44 +#define FAN1_PIN 45 +#define FAN2_PIN 46 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define KILL_PIN 41 +#define SDSS 53 +#define LED_PIN 13 +#define KILL_PIN 41 #ifndef PS_ON_PIN - #define PS_ON_PIN SERVO1_PIN + #define PS_ON_PIN SERVO1_PIN #endif /** @@ -211,69 +211,69 @@ // // LCDs and Controllers // -#define BEEPER_PIN 37 -#define SD_DETECT_PIN 49 +#define BEEPER_PIN 37 +#define SD_DETECT_PIN 49 #if ENABLED(FYSETC_MINI_12864) // // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 // - #define DOGLCD_A0 16 - #define DOGLCD_CS 17 + #define DOGLCD_A0 16 + #define DOGLCD_CS 17 #if ENABLED(FYSETC_GENERIC_12864_1_1) - #define LCD_BACKLIGHT_PIN 27 + #define LCD_BACKLIGHT_PIN 27 #endif - #define KILL_PIN 41 - #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + #define KILL_PIN 41 + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. // Seems to work best if left open. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 25 + #define RGB_LED_R_PIN 25 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 27 + #define RGB_LED_G_PIN 27 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 29 + #define RGB_LED_B_PIN 29 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 25 + #define NEOPIXEL_PIN 25 #endif #elif HAS_GRAPHICAL_LCD - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS 25 - #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + #define DOGLCD_A0 27 #endif #endif #if ENABLED(NEWPANEL) - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 #endif #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 3 + #define RGB_LED_R_PIN 3 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 4 + #define RGB_LED_G_PIN 4 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 9 + #define RGB_LED_B_PIN 9 #endif #ifndef RGB_LED_W_PIN - #define RGB_LED_W_PIN -1 + #define RGB_LED_W_PIN -1 #endif diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h index dff4749fb7..f0eb0bf4c6 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_14.h @@ -27,24 +27,24 @@ #define BOARD_NAME "FYSETC F6 1.4" -#define Z_MAX_PIN 2 +#define Z_MAX_PIN 2 #if HAS_TMC_UART /** * TMC2208/TMC2209 stepper drivers */ - #define X_SERIAL_RX_PIN 72 - #define X_SERIAL_TX_PIN 71 - #define Y_SERIAL_RX_PIN 73 - #define Y_SERIAL_TX_PIN 78 - #define Z_SERIAL_RX_PIN 75 - #define Z_SERIAL_TX_PIN 79 - #define E0_SERIAL_RX_PIN 77 - #define E0_SERIAL_TX_PIN 81 - #define E1_SERIAL_RX_PIN 76 - #define E1_SERIAL_TX_PIN 80 - #define E2_SERIAL_RX_PIN 62 - #define E2_SERIAL_TX_PIN 82 + #define X_SERIAL_RX_PIN 72 + #define X_SERIAL_TX_PIN 71 + #define Y_SERIAL_RX_PIN 73 + #define Y_SERIAL_TX_PIN 78 + #define Z_SERIAL_RX_PIN 75 + #define Z_SERIAL_TX_PIN 79 + #define E0_SERIAL_RX_PIN 77 + #define E0_SERIAL_TX_PIN 81 + #define E1_SERIAL_RX_PIN 76 + #define E1_SERIAL_TX_PIN 80 + #define E2_SERIAL_RX_PIN 62 + #define E2_SERIAL_TX_PIN 82 #endif #include "pins_FYSETC_F6_13.h" diff --git a/Marlin/src/pins/ramps/pins_K8400.h b/Marlin/src/pins/ramps/pins_K8400.h index f0928b0ed1..4c5ba7eca1 100644 --- a/Marlin/src/pins/ramps/pins_K8400.h +++ b/Marlin/src/pins/ramps/pins_K8400.h @@ -40,8 +40,8 @@ // // Limit Switches // -#define X_STOP_PIN 3 -#define Y_STOP_PIN 14 +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 #undef X_MIN_PIN #undef X_MAX_PIN @@ -52,13 +52,13 @@ // Steppers // #undef E1_STEP_PIN -#define E1_STEP_PIN 32 +#define E1_STEP_PIN 32 // // Heaters / Fans // #undef HEATER_1_PIN -#define HEATER_1_PIN 11 +#define HEATER_1_PIN 11 // // Misc. Functions @@ -69,5 +69,5 @@ #if Z_STEP_PIN == 26 #undef Z_STEP_PIN - #define Z_STEP_PIN 32 + #define Z_STEP_PIN 32 #endif diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index 8c426af17c..09f35b1fe0 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -37,73 +37,73 @@ // // Limit Switches // -#define X_STOP_PIN 3 -#define Y_STOP_PIN 14 -#define Z_MIN_PIN 68 // Used for bed leveling -#define Z_MAX_PIN 66 +#define X_STOP_PIN 3 +#define Y_STOP_PIN 14 +#define Z_MIN_PIN 68 // Used for bed leveling +#define Z_MAX_PIN 66 // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 63 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 63 -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 -#define E1_STEP_PIN 32 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 32 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 // // Temperature Sensors // -#define TEMP_0_PIN 13 +#define TEMP_0_PIN 13 // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define FAN_PIN 8 -#define CONTROLLER_FAN_PIN 9 +#define HEATER_0_PIN 10 +#define FAN_PIN 8 +#define CONTROLLER_FAN_PIN 9 // // Misc. Functions // -#define SDSS 25 +#define SDSS 25 -#define FIL_RUNOUT_PIN 69 // PK7 -#define KILL_PIN 20 // PD1 +#define FIL_RUNOUT_PIN 69 // PK7 +#define KILL_PIN 20 // PD1 // // LCD / Controller // -#define SD_DETECT_PIN 21 // PD0 -#define LCD_SDSS 53 -#define BEEPER_PIN 6 +#define SD_DETECT_PIN 21 // PD0 +#define LCD_SDSS 53 +#define BEEPER_PIN 6 -#define DOGLCD_CS 29 -#define DOGLCD_A0 27 +#define DOGLCD_CS 29 +#define DOGLCD_A0 27 -#define LCD_PINS_RS 27 -#define LCD_PINS_ENABLE 29 -#define LCD_PINS_D4 37 -#define LCD_PINS_D5 35 -#define LCD_PINS_D6 33 -#define LCD_PINS_D7 31 +#define LCD_PINS_RS 27 +#define LCD_PINS_ENABLE 29 +#define LCD_PINS_D4 37 +#define LCD_PINS_D5 35 +#define LCD_PINS_D6 33 +#define LCD_PINS_D7 31 #if ENABLED(NEWPANEL) - #define BTN_EN1 17 - #define BTN_EN2 16 - #define BTN_ENC 23 + #define BTN_EN1 17 + #define BTN_EN2 16 + #define BTN_ENC 23 #endif diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h index b1564ea2c3..057b51a584 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_14.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_14.h @@ -30,28 +30,28 @@ #endif #define BOARD_INFO_NAME "MKS BASE 1.4" -#define MKS_BASE_VERSION 14 +#define MKS_BASE_VERSION 14 // // Heaters / Fans // -#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9 +#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9 // Other Mods -#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11 -#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12 -#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM -#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup! -#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX +#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11 +#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12 +#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM +#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup! +#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 50 + #define RGB_LED_R_PIN 50 #endif #ifndef RGB_LED_R_PIN - #define RGB_LED_G_PIN 51 + #define RGB_LED_G_PIN 51 #endif #ifndef RGB_LED_R_PIN - #define RGB_LED_B_PIN 52 + #define RGB_LED_B_PIN 52 #endif #include "pins_MKS_BASE_common.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_16.h b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h index 985aa056b8..b769d655d6 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_16.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_16.h @@ -30,30 +30,30 @@ #endif #define BOARD_INFO_NAME "MKS BASE 1.6" -#define MKS_BASE_VERSION 16 +#define MKS_BASE_VERSION 16 // // Servos // -#define SERVO1_PIN 12 // Digital 12 / Pin 25 +#define SERVO1_PIN 12 // Digital 12 / Pin 25 // // Omitted RAMPS pins // #ifndef SERVO2_PIN - #define SERVO2_PIN -1 + #define SERVO2_PIN -1 #endif #ifndef SERVO3_PIN - #define SERVO3_PIN -1 + #define SERVO3_PIN -1 #endif #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN -1 + #define FILWIDTH_PIN -1 #endif #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN -1 + #define FIL_RUNOUT_PIN -1 #endif #ifndef PS_ON_PIN - #define PS_ON_PIN -1 + #define PS_ON_PIN -1 #endif #include "pins_MKS_BASE_common.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_common.h b/Marlin/src/pins/ramps/pins_MKS_BASE_common.h index e859310bf0..2d06171906 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_common.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_common.h @@ -34,19 +34,19 @@ // Heaters / Fans // // Power outputs EFBF or EFBE - #define MOSFET_D_PIN 7 + #define MOSFET_D_PIN 7 // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER - #define SPINDLE_LASER_PWM_PIN 2 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 15 // Pullup! - #define SPINDLE_DIR_PIN 19 + #define SPINDLE_LASER_PWM_PIN 2 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 15 // Pullup! + #define SPINDLE_DIR_PIN 19 #endif #ifndef CASE_LIGHT_PIN - #define CASE_LIGHT_PIN 2 + #define CASE_LIGHT_PIN 2 #endif #endif @@ -54,22 +54,22 @@ // // Microstepping pins // -#if MKS_BASE_VERSION >= 14 // |===== 1.4 =====|===== 1.5+ =====| - #define X_MS1_PIN 5 // PE3 | Pin 5 | PWM5 | | D3 | SERVO2_PIN - #define X_MS2_PIN 6 // PH3 | Pin 15 | PWM6 | Pin 14 | D6 | SERVO1_PIN - #define Y_MS1_PIN 59 // PF5 | Pin 92 | A5 | | | - #define Y_MS2_PIN 58 // PF4 | Pin 93 | A4 | | | - #define Z_MS1_PIN 22 // PA0 | Pin 78 | D22 | | | - #define Z_MS2_PIN 39 // PG2 | Pin 70 | D39 | | | +#if MKS_BASE_VERSION >= 14 // |===== 1.4 =====|===== 1.5+ =====| + #define X_MS1_PIN 5 // PE3 | Pin 5 | PWM5 | | D3 | SERVO2_PIN + #define X_MS2_PIN 6 // PH3 | Pin 15 | PWM6 | Pin 14 | D6 | SERVO1_PIN + #define Y_MS1_PIN 59 // PF5 | Pin 92 | A5 | | | + #define Y_MS2_PIN 58 // PF4 | Pin 93 | A4 | | | + #define Z_MS1_PIN 22 // PA0 | Pin 78 | D22 | | | + #define Z_MS2_PIN 39 // PG2 | Pin 70 | D39 | | | #if MKS_BASE_VERSION == 14 - #define E0_MS1_PIN 64 // PK2 | Pin 87 | A10 | | | - #define E0_MS2_PIN 63 // PK1 | Pin 88 | A9 | | | + #define E0_MS1_PIN 64 // PK2 | Pin 87 | A10 | | | + #define E0_MS2_PIN 63 // PK1 | Pin 88 | A9 | | | #else - #define E0_MS1_PIN 63 // PK1 | | | Pin 86 | A9 | - #define E0_MS2_PIN 64 // PK2 | | | Pin 87 | A10 | + #define E0_MS1_PIN 63 // PK1 | | | Pin 86 | A9 | + #define E0_MS2_PIN 64 // PK2 | | | Pin 87 | A10 | #endif - #define E1_MS1_PIN 57 // PF3 | Pin 94 | A3 | Pin 93 | A3 | - #define E1_MS2_PIN 4 // PG5 | Pin 1 | PWM4 | | D4 | SERVO3_PIN + #define E1_MS1_PIN 57 // PF3 | Pin 94 | A3 | Pin 93 | A3 | + #define E1_MS2_PIN 4 // PG5 | Pin 1 | PWM4 | | D4 | SERVO3_PIN #endif #include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h index 82a2111810..c4c90ba6fa 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h @@ -40,7 +40,7 @@ // Heaters / Fans // // Power outputs EFBF or EFBE -#define MOSFET_D_PIN 7 +#define MOSFET_D_PIN 7 // // PSU / SERVO @@ -48,8 +48,8 @@ // If PSU_CONTROL is specified, always hijack Servo 3 // #if ENABLED(PSU_CONTROL) - #define SERVO3_PIN -1 - #define PS_ON_PIN 4 + #define SERVO3_PIN -1 + #define PS_ON_PIN 4 #endif #include "pins_RAMPS.h" @@ -104,44 +104,44 @@ // // orange/white SDCD - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 // white ENCA - #define BTN_EN1 35 + #define BTN_EN1 35 // green ENCB - #define BTN_EN2 37 + #define BTN_EN2 37 // purple ENCBTN - #define BTN_ENC 31 + #define BTN_ENC 31 // brown A0 - #define DOGLCD_A0 27 + #define DOGLCD_A0 27 // green/white LCS - #define DOGLCD_CS 29 + #define DOGLCD_CS 29 // 50 gray MISO // 51 yellow MOSI // 52 orange SCK // blue SDCS - //#define SDSS 53 + //#define SDSS 53 // // VIKI2 4-wire lead // // blue BTN - #define KILL_PIN 23 + #define KILL_PIN 23 // green BUZZER - #define BEEPER_PIN 25 + #define BEEPER_PIN 25 // yellow RED-LED - #define STAT_LED_RED_PIN 16 + #define STAT_LED_RED_PIN 16 // white BLUE-LED - #define STAT_LED_BLUE_PIN 17 + #define STAT_LED_BLUE_PIN 17 #endif diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h index d56bbd1e45..3236627c3b 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h @@ -35,7 +35,7 @@ // Heaters / Fans // // Power outputs EFBF or EFBE -#define MOSFET_D_PIN 7 +#define MOSFET_D_PIN 7 // // CS Pins wired to avoid conflict with the LCD @@ -43,47 +43,47 @@ // #ifndef X_CS_PIN - #define X_CS_PIN 63 + #define X_CS_PIN 63 #endif #ifndef Y_CS_PIN - #define Y_CS_PIN 64 + #define Y_CS_PIN 64 #endif #ifndef Z_CS_PIN - #define Z_CS_PIN 65 + #define Z_CS_PIN 65 #endif #ifndef E0_CS_PIN - #define E0_CS_PIN 66 + #define E0_CS_PIN 66 #endif #ifndef E1_CS_PIN - #define E1_CS_PIN 21 + #define E1_CS_PIN 21 #endif // TMC2130 Diag Pins (currently just for reference) -#define X_DIAG_PIN 3 -#define Y_DIAG_PIN 14 -#define Z_DIAG_PIN 18 -#define E0_DIAG_PIN 2 -#define E1_DIAG_PIN 15 +#define X_DIAG_PIN 3 +#define Y_DIAG_PIN 14 +#define Z_DIAG_PIN 18 +#define E0_DIAG_PIN 2 +#define E1_DIAG_PIN 15 #ifndef SERVO1_PIN - #define SERVO1_PIN 12 + #define SERVO1_PIN 12 #endif #ifndef SERVO2_PIN - #define SERVO2_PIN 39 + #define SERVO2_PIN 39 #endif #ifndef SERVO3_PIN - #define SERVO3_PIN 32 + #define SERVO3_PIN 32 #endif #ifndef E1_SERIAL_TX_PIN - #define E1_SERIAL_TX_PIN 20 + #define E1_SERIAL_TX_PIN 20 #endif #ifndef E1_SERIAL_RX_PIN - #define E1_SERIAL_RX_PIN 21 + #define E1_SERIAL_RX_PIN 21 #endif #include "pins_RAMPS.h" diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 272ff5636b..050932773e 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -66,19 +66,19 @@ // #ifndef SERVO0_PIN #ifdef IS_RAMPS_13 - #define SERVO0_PIN 7 + #define SERVO0_PIN 7 #else - #define SERVO0_PIN 11 + #define SERVO0_PIN 11 #endif #endif #ifndef SERVO1_PIN - #define SERVO1_PIN 6 + #define SERVO1_PIN 6 #endif #ifndef SERVO2_PIN - #define SERVO2_PIN 5 + #define SERVO2_PIN 5 #endif #ifndef SERVO3_PIN - #define SERVO3_PIN 4 + #define SERVO3_PIN 4 #endif // @@ -86,26 +86,26 @@ // #ifndef X_STOP_PIN #ifndef X_MIN_PIN - #define X_MIN_PIN 3 + #define X_MIN_PIN 3 #endif #ifndef X_MAX_PIN - #define X_MAX_PIN 2 + #define X_MAX_PIN 2 #endif #endif #ifndef Y_STOP_PIN #ifndef Y_MIN_PIN - #define Y_MIN_PIN 14 + #define Y_MIN_PIN 14 #endif #ifndef Y_MAX_PIN - #define Y_MAX_PIN 15 + #define Y_MAX_PIN 15 #endif #endif #ifndef Z_STOP_PIN #ifndef Z_MIN_PIN - #define Z_MIN_PIN 18 + #define Z_MIN_PIN 18 #endif #ifndef Z_MAX_PIN - #define Z_MAX_PIN 19 + #define Z_MAX_PIN 19 #endif #endif @@ -113,67 +113,67 @@ // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 53 + #define X_CS_PIN 53 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN 49 + #define Y_CS_PIN 49 #endif #ifndef Z_STEP_PIN - #define Z_STEP_PIN 46 + #define Z_STEP_PIN 46 #endif -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN - #define Z_CS_PIN 40 + #define Z_CS_PIN 40 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 42 + #define E0_CS_PIN 42 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN 44 + #define E1_CS_PIN 44 #endif // // Temperature Sensors // #ifndef TEMP_0_PIN - #define TEMP_0_PIN 13 // Analog Input + #define TEMP_0_PIN 13 // Analog Input #endif #ifndef TEMP_1_PIN - #define TEMP_1_PIN 15 // Analog Input + #define TEMP_1_PIN 15 // Analog Input #endif #ifndef TEMP_BED_PIN - #define TEMP_BED_PIN 14 // Analog Input + #define TEMP_BED_PIN 14 // Analog Input #endif // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // @@ -197,74 +197,74 @@ // Heaters / Fans // #ifndef MOSFET_D_PIN - #define MOSFET_D_PIN -1 + #define MOSFET_D_PIN -1 #endif #ifndef RAMPS_D8_PIN - #define RAMPS_D8_PIN 8 + #define RAMPS_D8_PIN 8 #endif #ifndef RAMPS_D9_PIN - #define RAMPS_D9_PIN 9 + #define RAMPS_D9_PIN 9 #endif #ifndef RAMPS_D10_PIN - #define RAMPS_D10_PIN 10 + #define RAMPS_D10_PIN 10 #endif -#define HEATER_0_PIN RAMPS_D10_PIN +#define HEATER_0_PIN RAMPS_D10_PIN -#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed - #define HEATER_BED_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan - #define HEATER_1_PIN RAMPS_D9_PIN -#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed - #define HEATER_1_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan - #define FAN1_PIN RAMPS_D8_PIN -#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") - #define HEATER_BED_PIN RAMPS_D8_PIN +#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan + #define HEATER_1_PIN RAMPS_D9_PIN +#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN +#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN #if HOTENDS == 1 - #define FAN1_PIN MOSFET_D_PIN + #define FAN1_PIN MOSFET_D_PIN #else - #define HEATER_1_PIN MOSFET_D_PIN + #define HEATER_1_PIN MOSFET_D_PIN #endif #endif #ifndef FAN_PIN #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan - #define FAN_PIN RAMPS_D9_PIN + #define FAN_PIN RAMPS_D9_PIN #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan - #define FAN_PIN RAMPS_D8_PIN - #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed - #define FAN_PIN 4 // IO pin. Buffer needed - #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN RAMPS_D9_PIN + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN 4 // IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN #endif #endif // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 +#define SDSS 53 +#define LED_PIN 13 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 5 // Analog Input on AUX2 + #define FILWIDTH_PIN 5 // Analog Input on AUX2 #endif // RAMPS 1.4 DIO 4 on the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 4 + #define FIL_RUNOUT_PIN 4 #endif #ifndef PS_ON_PIN - #define PS_ON_PIN 12 + #define PS_ON_PIN 12 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) - #if NUM_SERVOS <= 1 // Prefer the servo connector - #define CASE_LIGHT_PIN 6 // Hardware PWM + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM #elif HAS_FREE_AUX2_PINS - #define CASE_LIGHT_PIN 44 // Hardware PWM + #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif @@ -272,14 +272,14 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) - #if !NUM_SERVOS // Use servo connector if possible - #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM - #define SPINDLE_DIR_PIN 5 + #if !NUM_SERVOS // Use servo connector if possible + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 #elif HAS_FREE_AUX2_PINS - #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM - #define SPINDLE_DIR_PIN 65 + #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 #else #error "No auto-assignable Spindle/Laser pins available." #endif @@ -290,13 +290,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI 66 + #define TMC_SW_MOSI 66 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO 44 + #define TMC_SW_MISO 44 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK 64 + #define TMC_SW_SCK 64 #endif #endif @@ -307,11 +307,11 @@ * Hardware serial communication ports. * If undefined software serial is used according to the pins below */ - //#define X_HARDWARE_SERIAL Serial1 + //#define X_HARDWARE_SERIAL Serial1 //#define X2_HARDWARE_SERIAL Serial1 - //#define Y_HARDWARE_SERIAL Serial1 + //#define Y_HARDWARE_SERIAL Serial1 //#define Y2_HARDWARE_SERIAL Serial1 - //#define Z_HARDWARE_SERIAL Serial1 + //#define Z_HARDWARE_SERIAL Serial1 //#define Z2_HARDWARE_SERIAL Serial1 //#define E0_HARDWARE_SERIAL Serial1 //#define E1_HARDWARE_SERIAL Serial1 @@ -324,91 +324,91 @@ // #ifndef X_SERIAL_TX_PIN - #define X_SERIAL_TX_PIN 40 + #define X_SERIAL_TX_PIN 40 #endif #ifndef X_SERIAL_RX_PIN - #define X_SERIAL_RX_PIN 63 + #define X_SERIAL_RX_PIN 63 #endif #ifndef X2_SERIAL_TX_PIN - #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN - #define X2_SERIAL_RX_PIN -1 + #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN - #define Y_SERIAL_TX_PIN 59 + #define Y_SERIAL_TX_PIN 59 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN 64 + #define Y_SERIAL_RX_PIN 64 #endif #ifndef Y2_SERIAL_TX_PIN - #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN - #define Y2_SERIAL_RX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN - #define Z_SERIAL_TX_PIN 42 + #define Z_SERIAL_TX_PIN 42 #endif #ifndef Z_SERIAL_RX_PIN - #define Z_SERIAL_RX_PIN 65 + #define Z_SERIAL_RX_PIN 65 #endif #ifndef Z2_SERIAL_TX_PIN - #define Z2_SERIAL_TX_PIN -1 + #define Z2_SERIAL_TX_PIN -1 #endif #ifndef Z2_SERIAL_RX_PIN - #define Z2_SERIAL_RX_PIN -1 + #define Z2_SERIAL_RX_PIN -1 #endif #ifndef E0_SERIAL_TX_PIN - #define E0_SERIAL_TX_PIN 44 + #define E0_SERIAL_TX_PIN 44 #endif #ifndef E0_SERIAL_RX_PIN - #define E0_SERIAL_RX_PIN 66 + #define E0_SERIAL_RX_PIN 66 #endif #ifndef E1_SERIAL_TX_PIN - #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN - #define E1_SERIAL_RX_PIN -1 + #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN - #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN - #define E2_SERIAL_RX_PIN -1 + #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN - #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN - #define E3_SERIAL_RX_PIN -1 + #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN - #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN - #define E4_SERIAL_RX_PIN -1 + #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN - #define E5_SERIAL_TX_PIN -1 + #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN - #define E5_SERIAL_RX_PIN -1 + #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN - #define E6_SERIAL_TX_PIN -1 + #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN - #define E6_SERIAL_RX_PIN -1 + #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN - #define E7_SERIAL_TX_PIN -1 + #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN - #define E7_SERIAL_RX_PIN -1 + #define E7_SERIAL_RX_PIN -1 #endif #endif @@ -416,13 +416,13 @@ // Průša i3 MK2 Multiplexer Support // #ifndef E_MUX0_PIN - #define E_MUX0_PIN 40 // Z_CS_PIN + #define E_MUX0_PIN 40 // Z_CS_PIN #endif #ifndef E_MUX1_PIN - #define E_MUX1_PIN 42 // E0_CS_PIN + #define E_MUX1_PIN 42 // E0_CS_PIN #endif #ifndef E_MUX2_PIN - #define E_MUX2_PIN 44 // E1_CS_PIN + #define E_MUX2_PIN 44 // E1_CS_PIN #endif ////////////////////////// @@ -436,62 +436,62 @@ // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS 40 - #define LCD_PINS_ENABLE 42 - #define LCD_PINS_D4 65 - #define LCD_PINS_D5 66 - #define LCD_PINS_D6 44 - #define LCD_PINS_D7 64 + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 #else #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 25 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #endif #elif ENABLED(ZONESTAR_LCD) - #define LCD_PINS_RS 64 - #define LCD_PINS_ENABLE 44 - #define LCD_PINS_D4 63 - #define LCD_PINS_D5 40 - #define LCD_PINS_D6 42 - #define LCD_PINS_D7 65 + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) - #define LCD_PINS_DC 25 // Set as output on init - #define LCD_PINS_RS 27 // Pull low for 1s to init + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init // DOGM SPI LCD Support - #define DOGLCD_CS 16 - #define DOGLCD_MOSI 17 - #define DOGLCD_SCK 23 - #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #define DOGLCD_A0 LCD_PINS_DC #else - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 #endif - #define LCD_PINS_D7 29 + #define LCD_PINS_D7 29 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #endif #endif @@ -499,10 +499,10 @@ #if DISABLED(NEWPANEL) // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -514,99 +514,99 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #if ENABLED(CR10_STOCKDISPLAY) - #define BTN_EN1 17 - #define BTN_EN2 23 + #define BTN_EN1 17 + #define BTN_EN2 23 #else - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 31 + #define BTN_EN2 33 #endif - #define BTN_ENC 35 + #define BTN_ENC 35 #ifndef SD_DETECT_PIN - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #endif #ifndef KILL_PIN - #define KILL_PIN 41 + #define KILL_PIN 41 #endif #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS SDSS - #define KILL_PIN 41 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS SDSS + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 40 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 42 - #define BTN_ENC -1 + #define BTN_EN1 40 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 42 + #define BTN_ENC -1 - #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define DOGLCD_CS 45 - #define DOGLCD_A0 44 + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 #define LCD_SCREEN_ROT_180 - #define BEEPER_PIN 33 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board - #define KILL_PIN 31 + #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + #define KILL_PIN 31 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 - #define BEEPER_PIN 23 - #define LCD_BACKLIGHT_PIN 33 + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 - #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define LCD_SDSS SDSS + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) - #define BEEPER_PIN 37 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #define BEEPER_PIN 37 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 #ifndef KILL_PIN - #define KILL_PIN 41 + #define KILL_PIN 41 #endif - #if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 + #if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 - #define DOGLCD_A0 27 - #define DOGLCD_CS 25 + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 // GLCD features // Uncomment screen orientation @@ -615,50 +615,50 @@ //#define LCD_SCREEN_ROT_270 // not connected to a pin - #define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!) + #define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!) - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 31 + #define BTN_EN2 33 #elif ENABLED(FYSETC_MINI_12864) // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 - #define DOGLCD_A0 16 - #define DOGLCD_CS 17 + #define DOGLCD_A0 16 + #define DOGLCD_CS 17 - #define BTN_EN1 33 - #define BTN_EN2 31 + #define BTN_EN1 33 + #define BTN_EN2 31 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 25 + #define RGB_LED_R_PIN 25 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 27 + #define RGB_LED_G_PIN 27 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 29 + #define RGB_LED_B_PIN 29 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 25 + #define NEOPIXEL_PIN 25 #endif #endif #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // not connected to a pin - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 // GLCD features // Uncomment screen orientation @@ -666,16 +666,16 @@ //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 - #define SD_DETECT_PIN 49 - #define KILL_PIN 64 + #define SD_DETECT_PIN 49 + #define KILL_PIN 64 #elif ENABLED(ZONESTAR_LCD) - #define ADC_KEYPAD_PIN 12 + #define ADC_KEYPAD_PIN 12 #elif ENABLED(AZSMZ_12864) @@ -684,22 +684,22 @@ #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 #if ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #endif #endif @@ -708,16 +708,16 @@ #endif // HAS_SPI_LCD #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #ifndef BTN_EN1 - #define BTN_EN1 64 + #define BTN_EN1 64 #endif #ifndef BTN_EN2 - #define BTN_EN2 59 + #define BTN_EN2 59 #endif #ifndef BTN_ENC - #define BTN_ENC 63 + #define BTN_ENC 63 #endif #endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h index ea2ace7e86..f6847feb4b 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h @@ -32,31 +32,31 @@ // // Power outputs EFBF or EFBE -#define MOSFET_D_PIN 7 +#define MOSFET_D_PIN 7 -#define FIL_RUNOUT_PIN 2 +#define FIL_RUNOUT_PIN 2 #if NUM_RUNOUT_SENSORS > 1 - #define FIL_RUNOUT2_PIN 15 // Creality CR-X can use dual runout sensors + #define FIL_RUNOUT2_PIN 15 // Creality CR-X can use dual runout sensors #endif -#define SD_DETECT_PIN 49 // Always define onboard SD detect +#define SD_DETECT_PIN 49 // Always define onboard SD detect -#define PS_ON_PIN 40 // Used by CR2020 Industrial series +#define PS_ON_PIN 40 // Used by CR2020 Industrial series #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) - #define CASE_LIGHT_PIN 65 + #define CASE_LIGHT_PIN 65 #endif #include "pins_RAMPS.h" #ifndef BEEPER_PIN - #define BEEPER_PIN 37 // Always define beeper pin so Play Tone works with ExtUI + #define BEEPER_PIN 37 // Always define beeper pin so Play Tone works with ExtUI #endif -#define EXP1_PIN 65 // A11 - Used by CR2020 Industrial series for case -#define EXP2_PIN 66 // A12 -#define EXP3_PIN 11 // SERVO0_PIN -#define EXP4_PIN 12 // PS_ON_PIN +#define EXP1_PIN 65 // A11 - Used by CR2020 Industrial series for case +#define EXP2_PIN 66 // A12 +#define EXP3_PIN 11 // SERVO0_PIN +#define EXP4_PIN 12 // PS_ON_PIN -#define SUICIDE_PIN 12 // Used by CR2020 Industrial series -#define SUICIDE_PIN_INVERTING true // Used by CR2020 Industrial series +#define SUICIDE_PIN 12 // Used by CR2020 Industrial series +#define SUICIDE_PIN_INVERTING true // Used by CR2020 Industrial series diff --git a/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h b/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h index 39aecb0bc7..b0ba7822ef 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_DAGOMA.h @@ -27,12 +27,12 @@ #define BOARD_INFO_NAME "Dagoma3D F5 RAMPS" -#define X_STOP_PIN 2 -#define Y_STOP_PIN 3 -#define Z_STOP_PIN 15 -#define FIL_RUNOUT_PIN 39 +#define X_STOP_PIN 2 +#define Y_STOP_PIN 3 +#define Z_STOP_PIN 15 +#define FIL_RUNOUT_PIN 39 -#define ORIG_E0_AUTO_FAN_PIN 7 +#define ORIG_E0_AUTO_FAN_PIN 7 // // Import RAMPS 1.4 pins diff --git a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h index aa45370e6a..0323366944 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h @@ -37,80 +37,80 @@ // // Limit Switches // -#define X_MIN_PIN 3 -#define X_MAX_PIN 2 -#define Y_MIN_PIN 16 -#define Y_MAX_PIN 17 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 16 +#define Y_MAX_PIN 17 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 19 + #define Z_MIN_PROBE_PIN 19 #endif // // Steppers // -#define X_STEP_PIN 26 -#define X_DIR_PIN 28 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 26 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 38 -#define Y_DIR_PIN 40 -#define Y_ENABLE_PIN 36 +#define Y_STEP_PIN 38 +#define Y_DIR_PIN 40 +#define Y_ENABLE_PIN 36 -#define Z_STEP_PIN 44 -#define Z_DIR_PIN 46 -#define Z_ENABLE_PIN 42 +#define Z_STEP_PIN 44 +#define Z_DIR_PIN 46 +#define Z_ENABLE_PIN 42 -#define E0_STEP_PIN 32 -#define E0_DIR_PIN 34 -#define E0_ENABLE_PIN 30 +#define E0_STEP_PIN 32 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 // // Temperature Sensors // -#define TEMP_0_PIN 2 // Analog Input -#define TEMP_BED_PIN 1 // Analog Input +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 66 // Don't use 49 (SD_DETECT_PIN) #endif // // Heaters / Fans // #if ENABLED(RAMPS_V_1_0) - #define HEATER_0_PIN 12 - #define HEATER_BED_PIN -1 + #define HEATER_0_PIN 12 + #define HEATER_BED_PIN -1 #ifndef FAN_PIN - #define FAN_PIN 11 + #define FAN_PIN 11 #endif -#else // RAMPS_V_1_1 or RAMPS_V_1_2 - #define HEATER_0_PIN 10 - #define HEATER_BED_PIN 8 +#else // RAMPS_V_1_1 or RAMPS_V_1_2 + #define HEATER_0_PIN 10 + #define HEATER_BED_PIN 8 #ifndef FAN_PIN - #define FAN_PIN 9 + #define FAN_PIN 9 #endif #endif // // Misc. Functions // -#define SDPOWER_PIN 48 -#define SDSS 53 -#define LED_PIN 13 -#define CASE_LIGHT_PIN 45 // Hardware PWM +#define SDPOWER_PIN 48 +#define SDSS 53 +#define LED_PIN 13 +#define CASE_LIGHT_PIN 45 // Hardware PWM // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 41 // Pullup or pulldown! -#define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM -#define SPINDLE_DIR_PIN 43 +#define SPINDLE_LASER_ENA_PIN 41 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM +#define SPINDLE_DIR_PIN 43 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h index 24aa7b9c90..f93b6dcc86 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h @@ -44,8 +44,8 @@ #define BOARD_INFO_NAME "RAMPS 1.4 Plus" -#define RAMPS_D8_PIN 10 -#define RAMPS_D10_PIN 8 +#define RAMPS_D8_PIN 10 +#define RAMPS_D10_PIN 8 #include "pins_RAMPS.h" @@ -60,13 +60,13 @@ #undef E1_DIR_PIN #undef E1_ENABLE_PIN -#define E0_STEP_PIN 36 -#define E0_DIR_PIN 34 -#define E0_ENABLE_PIN 30 +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 -#define E1_STEP_PIN 26 -#define E1_DIR_PIN 28 -#define E1_ENABLE_PIN 24 +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 #undef X_CS_PIN #undef Y_CS_PIN @@ -77,10 +77,10 @@ #if ENABLED(ULTRA_LCD, REPRAPWORLD_GRAPHICAL_LCD, CR10_STOCKDISPLAY) && !BOTH(NEWPANEL, PANEL_ONE) #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) #undef LCD_PINS_RS - #define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42 + #define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42 #undef LCD_PINS_ENABLE - #define LCD_PINS_ENABLE 44 // 3DYMY boards pin 17 -> 44 + #define LCD_PINS_ENABLE 44 // 3DYMY boards pin 17 -> 44 #endif #undef LCD_PINS_D7 - #define LCD_PINS_D7 53 // 3DYMY boards pin 29 -> 53 + #define LCD_PINS_D7 53 // 3DYMY boards pin 29 -> 53 #endif diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h index da6b6e4187..8e84281754 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h @@ -33,15 +33,15 @@ // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops + #define Z_MIN_PROBE_PIN 19 // Z-MAX pin J14 End Stops #endif // // MOSFET changes // -#define RAMPS_D9_PIN 8 // FAN (by default) -#define RAMPS_D10_PIN 9 // EXTRUDER 1 -#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN +#define RAMPS_D9_PIN 8 // FAN (by default) +#define RAMPS_D10_PIN 9 // EXTRUDER 1 +#define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN #include "pins_RAMPS.h" @@ -52,18 +52,18 @@ #undef E0_STEP_PIN #undef E0_DIR_PIN #undef E0_ENABLE_PIN -#define E0_STEP_PIN 36 -#define E0_DIR_PIN 34 -#define E0_ENABLE_PIN 30 +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 34 +#define E0_ENABLE_PIN 30 #undef E1_STEP_PIN #undef E1_DIR_PIN #undef E1_ENABLE_PIN -#define E1_STEP_PIN 26 -#define E1_DIR_PIN 28 -#define E1_ENABLE_PIN 24 +#define E1_STEP_PIN 26 +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 24 -#define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot +#define STEPPER_RESET_PIN 41 // Stepper drivers have a reset on RigidBot // // Temperature Sensors @@ -71,33 +71,33 @@ #undef TEMP_0_PIN #undef TEMP_1_PIN #undef TEMP_BED_PIN -#define TEMP_0_PIN 14 // Analog Input -#define TEMP_1_PIN 13 // Analog Input -#define TEMP_BED_PIN 15 // Analog Input +#define TEMP_0_PIN 14 // Analog Input +#define TEMP_1_PIN 13 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #undef MAX6675_SS_PIN #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card + #define MAX6675_SS_PIN 53 // Don't use pin 53 if there is even the remote possibility of using Display/SD card #else - #define MAX6675_SS_PIN 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present + #define MAX6675_SS_PIN 49 // Don't use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present #endif // // Heaters / Fans // #undef HEATER_BED_PIN -#define HEATER_BED_PIN 10 +#define HEATER_BED_PIN 10 #ifndef FAN_PIN - #define FAN_PIN 8 // Same as RAMPS_13_EEF + #define FAN_PIN 8 // Same as RAMPS_13_EEF #endif // // Misc. Functions // #undef PS_ON_PIN -#define PS_ON_PIN -1 +#define PS_ON_PIN -1 // // LCD / Controller @@ -106,33 +106,33 @@ #if ENABLED(RIGIDBOT_PANEL) #undef BEEPER_PIN - #define BEEPER_PIN -1 + #define BEEPER_PIN -1 // Direction buttons - #define BTN_UP 37 - #define BTN_DWN 35 - #define BTN_LFT 33 - #define BTN_RT 32 + #define BTN_UP 37 + #define BTN_DWN 35 + #define BTN_LFT 33 + #define BTN_RT 32 // 'R' button #undef BTN_ENC - #define BTN_ENC 31 + #define BTN_ENC 31 // Disable encoder #undef BTN_EN1 - #define BTN_EN1 -1 + #define BTN_EN1 -1 #undef BTN_EN2 - #define BTN_EN2 -1 + #define BTN_EN2 -1 #undef SD_DETECT_PIN - #define SD_DETECT_PIN 22 + #define SD_DETECT_PIN 22 #elif ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) #undef SD_DETECT_PIN - #define SD_DETECT_PIN 22 + #define SD_DETECT_PIN 22 #undef KILL_PIN - #define KILL_PIN 32 + #define KILL_PIN 32 #endif diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h index eb46ec9eaa..d56ab1bb7f 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h @@ -40,12 +40,12 @@ #define DAC_STEPPER_ORDER { 0, 1, 2, 3 } #define DAC_STEPPER_SENSE 0.05 // sense resistors on rigidboard stepper chips are .05 value -#define DAC_STEPPER_ADDRESS 0 -#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096 -#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V -#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2 -#define DAC_DISABLE_PIN 42 // set low to enable DAC -#define DAC_OR_ADDRESS 0x01 +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 4096 // was 5000 but max allowable value is actually 4096 +#define DAC_STEPPER_VREF 1 // internal Vref, gain 2x = 4.096V +#define DAC_STEPPER_GAIN 1 // value of 1 here sets gain of 2 +#define DAC_DISABLE_PIN 42 // set low to enable DAC +#define DAC_OR_ADDRESS 0x01 #ifndef DAC_MOTOR_CURRENT_DEFAULT #define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis diff --git a/Marlin/src/pins/ramps/pins_RL200.h b/Marlin/src/pins/ramps/pins_RL200.h index 570a9c26f9..7b0303476b 100644 --- a/Marlin/src/pins/ramps/pins_RL200.h +++ b/Marlin/src/pins/ramps/pins_RL200.h @@ -37,16 +37,16 @@ #error "You must set ([XYZ]|Z2|E0)_DRIVER_TYPE to DRV8825 in Configuration.h for RL200." #endif -#define E0_STEP_PIN 26 // (RUMBA E1 pins) -#define E0_DIR_PIN 25 -#define E0_ENABLE_PIN 27 +#define E0_STEP_PIN 26 // (RUMBA E1 pins) +#define E0_DIR_PIN 25 +#define E0_ENABLE_PIN 27 -#define E1_STEP_PIN 29 // (RUMBA E2 pins) -#define E1_DIR_PIN 28 -#define E1_ENABLE_PIN 39 +#define E1_STEP_PIN 29 // (RUMBA E2 pins) +#define E1_DIR_PIN 28 +#define E1_ENABLE_PIN 39 -#define Z2_STEP_PIN 23 // (RUMBA E0 pins) -#define Z2_DIR_PIN 22 -#define Z2_ENABLE_PIN 24 +#define Z2_STEP_PIN 23 // (RUMBA E0 pins) +#define Z2_DIR_PIN 22 +#define Z2_ENABLE_PIN 24 #include "pins_RUMBA.h" diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h index e613b9cb6c..4bf10d7399 100644 --- a/Marlin/src/pins/ramps/pins_RUMBA.h +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -41,56 +41,56 @@ // // Servos // -#define SERVO0_PIN 5 +#define SERVO0_PIN 5 // // Limit Switches // -#define X_MIN_PIN 37 -#define X_MAX_PIN 36 -#define Y_MIN_PIN 35 -#define Y_MAX_PIN 34 -#define Z_MIN_PIN 33 -#define Z_MAX_PIN 32 +#define X_MIN_PIN 37 +#define X_MAX_PIN 36 +#define Y_MIN_PIN 35 +#define Y_MAX_PIN 34 +#define Z_MIN_PIN 33 +#define Z_MAX_PIN 32 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 17 -#define X_DIR_PIN 16 -#define X_ENABLE_PIN 48 +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 48 -#define Y_STEP_PIN 54 -#define Y_DIR_PIN 47 -#define Y_ENABLE_PIN 55 +#define Y_STEP_PIN 54 +#define Y_DIR_PIN 47 +#define Y_ENABLE_PIN 55 -#define Z_STEP_PIN 57 -#define Z_DIR_PIN 56 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 57 +#define Z_DIR_PIN 56 +#define Z_ENABLE_PIN 62 #ifndef E0_STEP_PIN - #define E0_STEP_PIN 23 - #define E0_DIR_PIN 22 - #define E0_ENABLE_PIN 24 + #define E0_STEP_PIN 23 + #define E0_DIR_PIN 22 + #define E0_ENABLE_PIN 24 #endif #ifndef E1_STEP_PIN - #define E1_STEP_PIN 26 - #define E1_DIR_PIN 25 - #define E1_ENABLE_PIN 27 + #define E1_STEP_PIN 26 + #define E1_DIR_PIN 25 + #define E1_ENABLE_PIN 27 #endif #if E1_STEP_PIN != 29 - #define E2_STEP_PIN 29 - #define E2_DIR_PIN 28 - #define E2_ENABLE_PIN 39 + #define E2_STEP_PIN 29 + #define E2_DIR_PIN 28 + #define E2_ENABLE_PIN 39 #endif // @@ -98,134 +98,134 @@ // #ifndef TEMP_0_PIN #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used) + #define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used) #else - #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) + #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) #endif #endif #ifndef TEMP_1_PIN #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used) + #define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used) #else - #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) + #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) #endif #endif #if TEMP_SENSOR_2 == -1 - #define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple) + #define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple) #else - #define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used) + #define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used) #endif // Optional for extruder 4 or chamber: -//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) +//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) #ifndef TEMP_CHAMBER_PIN - //#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) + //#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used) #endif #if TEMP_SENSOR_BED == -1 - #define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple) + #define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple) #else - #define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used) + #define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used) #endif // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 3 -#define HEATER_2_PIN 6 -#define HEATER_3_PIN 8 -#define HEATER_BED_PIN 9 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 8 +#define HEATER_BED_PIN 9 #ifndef FAN_PIN - #define FAN_PIN 7 + #define FAN_PIN 7 #endif #ifndef FAN1_PIN - #define FAN1_PIN 8 + #define FAN1_PIN 8 #endif // // Misc. Functions // -#define LED_PIN 13 -#define PS_ON_PIN 45 -#define KILL_PIN 46 -#define CASE_LIGHT_PIN 45 +#define LED_PIN 13 +#define PS_ON_PIN 45 +#define KILL_PIN 46 +#define CASE_LIGHT_PIN 45 // // M3/M4/M5 - Spindle/Laser Control // #ifndef SPINDLE_LASER_PWM_PIN - #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use? + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM. Pin 4 interrupts OC0* and OC1* always in use? #endif #ifndef SPINDLE_LASER_ENA_PIN - #define SPINDLE_LASER_ENA_PIN 14 // Pullup! + #define SPINDLE_LASER_ENA_PIN 14 // Pullup! #endif #ifndef SPINDLE_DIR_PIN - #define SPINDLE_DIR_PIN 15 + #define SPINDLE_DIR_PIN 15 #endif // // LCD / Controller // #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) - #define LCD_PINS_DC 38 // Set as output on init - #define LCD_PINS_RS 41 // Pull low for 1s to init + #define LCD_PINS_DC 38 // Set as output on init + #define LCD_PINS_RS 41 // Pull low for 1s to init // DOGM SPI LCD Support - #define DOGLCD_CS 19 - #define DOGLCD_MOSI 42 - #define DOGLCD_SCK 18 - #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_CS 19 + #define DOGLCD_MOSI 42 + #define DOGLCD_SCK 18 + #define DOGLCD_A0 LCD_PINS_DC #elif ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS 42 - #define DOGLCD_A0 19 - #define DOGLCD_MOSI 51 - #define DOGLCD_SCK 52 + #define DOGLCD_CS 42 + #define DOGLCD_A0 19 + #define DOGLCD_MOSI 51 + #define DOGLCD_SCK 52 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN 18 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 41 + #define RGB_LED_R_PIN 41 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 38 + #define RGB_LED_G_PIN 38 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 40 + #define RGB_LED_B_PIN 40 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 25 + #define NEOPIXEL_PIN 25 #endif #else - #define LCD_PINS_RS 19 - #define LCD_PINS_ENABLE 42 - #define LCD_PINS_D4 18 - #define LCD_PINS_D5 38 - #define LCD_PINS_D6 41 + #define LCD_PINS_RS 19 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 18 + #define LCD_PINS_D5 38 + #define LCD_PINS_D6 41 #endif -#define LCD_PINS_D7 40 +#define LCD_PINS_D7 40 // // Beeper, SD Card, Encoder // -#define BEEPER_PIN 44 +#define BEEPER_PIN 44 #if ENABLED(SDSUPPORT) - #define SDSS 53 - #define SD_DETECT_PIN 49 + #define SDSS 53 + #define SD_DETECT_PIN 49 #endif #if ENABLED(NEWPANEL) - #define BTN_EN1 11 - #define BTN_EN2 12 - #define BTN_ENC 43 + #define BTN_EN1 11 + #define BTN_EN2 12 + #define BTN_ENC 43 #endif diff --git a/Marlin/src/pins/ramps/pins_TANGO.h b/Marlin/src/pins/ramps/pins_TANGO.h index d3b7413fa2..221b30b0cb 100644 --- a/Marlin/src/pins/ramps/pins_TANGO.h +++ b/Marlin/src/pins/ramps/pins_TANGO.h @@ -27,24 +27,24 @@ #define BOARD_INFO_NAME "Tango" -#define FAN_PIN 8 -#define FAN1_PIN -1 +#define FAN_PIN 8 +#define FAN1_PIN -1 -#define ORIG_E0_AUTO_FAN_PIN 7 +#define ORIG_E0_AUTO_FAN_PIN 7 #ifndef TEMP_0_PIN #if TEMP_SENSOR_0 == -1 - #define TEMP_0_PIN 10 // Analog Input (connector *K1* on Tango thermocouple ADD ON is used) + #define TEMP_0_PIN 10 // Analog Input (connector *K1* on Tango thermocouple ADD ON is used) #else - #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) + #define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used) #endif #endif #ifndef TEMP_1_PIN #if TEMP_SENSOR_1 == -1 - #define TEMP_1_PIN 9 // Analog Input (connector *K2* on Tango thermocouple ADD ON is used) + #define TEMP_1_PIN 9 // Analog Input (connector *K2* on Tango thermocouple ADD ON is used) #else - #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) + #define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used) #endif #endif diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index 1c5ea39279..dcf5ff5a0a 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -31,10 +31,10 @@ // Servos // #if MB(TRIGORILLA_14_11) - #define SERVO0_PIN 5 - #define SERVO1_PIN 4 - #define SERVO2_PIN 11 - #define SERVO3_PIN 6 + #define SERVO0_PIN 5 + #define SERVO1_PIN 4 + #define SERVO2_PIN 11 + #define SERVO3_PIN 6 #endif // @@ -42,48 +42,48 @@ // //#define ANYCUBIC_4_MAX_PRO_ENDSTOPS #if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS) - #define X_MAX_PIN 43 - #define Y_MIN_PIN 19 + #define X_MAX_PIN 43 + #define Y_MIN_PIN 19 #endif // Labeled pins -#define TRIGORILLA_HEATER_BED_PIN 8 -#define TRIGORILLA_HEATER_0_PIN 10 -#define TRIGORILLA_HEATER_1_PIN 45 // Anycubic Kossel: Unused +#define TRIGORILLA_HEATER_BED_PIN 8 +#define TRIGORILLA_HEATER_0_PIN 10 +#define TRIGORILLA_HEATER_1_PIN 45 // Anycubic Kossel: Unused -#define TRIGORILLA_FAN0_PIN 9 // Anycubic Kossel: Usually the part cooling fan -#define TRIGORILLA_FAN1_PIN 7 // Anycubic Kossel: Unused -#define TRIGORILLA_FAN2_PIN 44 // Anycubic Kossel: Hotend fan +#define TRIGORILLA_FAN0_PIN 9 // Anycubic Kossel: Usually the part cooling fan +#define TRIGORILLA_FAN1_PIN 7 // Anycubic Kossel: Unused +#define TRIGORILLA_FAN2_PIN 44 // Anycubic Kossel: Hotend fan // Remap MOSFET pins to common usages: -#define RAMPS_D10_PIN TRIGORILLA_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h +#define RAMPS_D10_PIN TRIGORILLA_HEATER_0_PIN // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h -#if HOTENDS > 1 // EEF and EEB +#if HOTENDS > 1 // EEF and EEB #define RAMPS_D9_PIN TRIGORILLA_HEATER_1_PIN #if !TEMP_SENSOR_BED // EEF - #define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN + #define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN #else // EEB - #define RAMPS_D8_PIN TRIGORILLA_HEATER_BED_PIN - #define FAN_PIN TRIGORILLA_FAN0_PIN // Override pin 4 in pins_RAMPS.h + #define RAMPS_D8_PINTRIGORILLA_HEATER_BED_PIN + #define FAN_PIN TRIGORILLA_FAN0_PIN // Override pin 4 in pins_RAMPS.h #endif #elif TEMP_SENSOR_BED // EFB (Anycubic Kossel default) - #define RAMPS_D9_PIN TRIGORILLA_FAN0_PIN - #define RAMPS_D8_PIN TRIGORILLA_HEATER_BED_PIN + #define RAMPS_D9_PIN TRIGORILLA_FAN0_PIN + #define RAMPS_D8_PINTRIGORILLA_HEATER_BED_PIN #else // EFF - #define RAMPS_D9_PIN TRIGORILLA_FAN1_PIN - #define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN + #define RAMPS_D9_PIN TRIGORILLA_FAN1_PIN + #define RAMPS_D8_PIN TRIGORILLA_FAN0_PIN #endif -#if HOTENDS > 1 || TEMP_SENSOR_BED // EEF, EEB, EFB - #define FAN1_PIN TRIGORILLA_FAN1_PIN +#if HOTENDS > 1 || TEMP_SENSOR_BED // EEF, EEB, EFB + #define FAN1_PIN TRIGORILLA_FAN1_PIN #endif -#define FAN2_PIN TRIGORILLA_FAN2_PIN -#define ORIG_E0_AUTO_FAN_PIN TRIGORILLA_FAN2_PIN // Used in Anycubic Kossel example config +#define FAN2_PIN TRIGORILLA_FAN2_PIN +#define ORIG_E0_AUTO_FAN_PINTRIGORILLA_FAN2_PIN // Used in Anycubic Kossel example config #include "pins_RAMPS.h" @@ -96,25 +96,25 @@ // LCD Display output pins #if BOTH(NEWPANEL, PANEL_ONE) #undef LCD_PINS_D6 - #define LCD_PINS_D6 57 + #define LCD_PINS_D6 57 #endif // LCD Display input pins #if ENABLED(NEWPANEL) #if ANY(VIKI2, miniVIKI) #undef DOGLCD_A0 - #define DOGLCD_A0 23 + #define DOGLCD_A0 23 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) #undef BEEPER_PIN - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #undef LCD_BACKLIGHT_PIN - #define LCD_BACKLIGHT_PIN 67 + #define LCD_BACKLIGHT_PIN 67 #endif #elif ENABLED(MINIPANEL) #undef BEEPER_PIN - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #undef DOGLCD_A0 - #define DOGLCD_A0 42 + #define DOGLCD_A0 42 #endif #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index 9fc53379d5..f5c79d0b57 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -34,70 +34,70 @@ // // Servos // -#define SERVO0_PIN 11 -#define SERVO1_PIN 12 -#define SERVO2_PIN 5 -#define SERVO3_PIN 4 +#define SERVO0_PIN 11 +#define SERVO1_PIN 12 +#define SERVO2_PIN 5 +#define SERVO3_PIN 4 // // Limit Switches // -#define X_MIN_PIN 3 -#define X_MAX_PIN 2 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN SERVO3_PIN + #define Z_MIN_PROBE_PIN SERVO3_PIN #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 -#define X_CS_PIN 57 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 +#define X_CS_PIN 57 -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 -#define Y_CS_PIN 58 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 +#define Y_CS_PIN 58 -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 -#define Z_CS_PIN 53 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 +#define Z_CS_PIN 53 -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 -#define E0_CS_PIN 49 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 +#define E0_CS_PIN 49 -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 -#define E1_CS_PIN E0_CS_PIN +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 +#define E1_CS_PIN E0_CS_PIN -#define E2_STEP_PIN 63 -#define E2_DIR_PIN 22 -#define E2_ENABLE_PIN 59 -#define E2_CS_PIN E0_CS_PIN +#define E2_STEP_PIN 63 +#define E2_DIR_PIN 22 +#define E2_ENABLE_PIN 59 +#define E2_CS_PIN E0_CS_PIN -#define E3_STEP_PIN 32 -#define E3_DIR_PIN 40 -#define E3_ENABLE_PIN 39 -#define E3_CS_PIN E0_CS_PIN +#define E3_STEP_PIN 32 +#define E3_DIR_PIN 40 +#define E3_ENABLE_PIN 39 +#define E3_CS_PIN E0_CS_PIN -#define E4_STEP_PIN 43 -#define E4_DIR_PIN 42 -#define E4_ENABLE_PIN 47 -#define E4_CS_PIN E0_CS_PIN +#define E4_STEP_PIN 43 +#define E4_DIR_PIN 42 +#define E4_ENABLE_PIN 47 +#define E4_CS_PIN E0_CS_PIN #if HAS_TMC_UART /** @@ -122,34 +122,34 @@ // Software serial // - #define X_SERIAL_TX_PIN -1 // 59 - #define X_SERIAL_RX_PIN -1 // 63 - #define X2_SERIAL_TX_PIN -1 - #define X2_SERIAL_RX_PIN -1 + #define X_SERIAL_TX_PIN -1 // 59 + #define X_SERIAL_RX_PIN -1 // 63 + #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_RX_PIN -1 - #define Y_SERIAL_TX_PIN -1 // 64 - #define Y_SERIAL_RX_PIN -1 // 40 - #define Y2_SERIAL_TX_PIN -1 - #define Y2_SERIAL_RX_PIN -1 + #define Y_SERIAL_TX_PIN -1 // 64 + #define Y_SERIAL_RX_PIN -1 // 40 + #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 - #define Z_SERIAL_TX_PIN -1 // 44 - #define Z_SERIAL_RX_PIN -1 // 42 - #define Z2_SERIAL_TX_PIN -1 - #define Z2_SERIAL_RX_PIN -1 + #define Z_SERIAL_TX_PIN -1 // 44 + #define Z_SERIAL_RX_PIN -1 // 42 + #define Z2_SERIAL_TX_PIN -1 + #define Z2_SERIAL_RX_PIN -1 - #define E0_SERIAL_TX_PIN -1 // 66 - #define E0_SERIAL_RX_PIN -1 // 65 - #define E1_SERIAL_TX_PIN -1 - #define E1_SERIAL_RX_PIN -1 - #define E2_SERIAL_TX_PIN -1 - #define E2_SERIAL_RX_PIN -1 - #define E3_SERIAL_TX_PIN -1 - #define E3_SERIAL_RX_PIN -1 - #define E4_SERIAL_TX_PIN -1 - #define E4_SERIAL_RX_PIN -1 - #define E5_SERIAL_RX_PIN -1 - #define E6_SERIAL_RX_PIN -1 - #define E7_SERIAL_RX_PIN -1 + #define E0_SERIAL_TX_PIN -1 // 66 + #define E0_SERIAL_RX_PIN -1 // 65 + #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_RX_PIN -1 + #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_RX_PIN -1 + #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_RX_PIN -1 + #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_RX_PIN -1 + #define E5_SERIAL_RX_PIN -1 + #define E6_SERIAL_RX_PIN -1 + #define E7_SERIAL_RX_PIN -1 #endif // @@ -170,16 +170,16 @@ // // Temperature Sensors // -#define TEMP_0_PIN 13 -#define TEMP_1_PIN 15 -#define TEMP_2_PIN 10 -#define TEMP_3_PIN 11 -#define TEMP_BED_PIN 14 +#define TEMP_0_PIN 13 +#define TEMP_1_PIN 15 +#define TEMP_2_PIN 10 +#define TEMP_3_PIN 11 +#define TEMP_BED_PIN 14 #if TEMP_SENSOR_CHAMBER > 0 - #define TEMP_CHAMBER_PIN 12 + #define TEMP_CHAMBER_PIN 12 #else - #define TEMP_4_PIN 12 + #define TEMP_4_PIN 12 #endif // SPI for Max6675 or Max31855 Thermocouple @@ -192,50 +192,50 @@ // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 7 -#define HEATER_2_PIN 44 -#define HEATER_BED_PIN 8 +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 44 +#define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN_PIN 9 #if EXTRUDERS >= 5 - #define HEATER_4_PIN 6 + #define HEATER_4_PIN 6 #else - #define FAN1_PIN 6 + #define FAN1_PIN 6 #endif #if EXTRUDERS >= 4 - #define HEATER_3_PIN 45 + #define HEATER_3_PIN 45 #else - #define FAN2_PIN 45 + #define FAN2_PIN 45 #endif // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 +#define SDSS 53 +#define LED_PIN 13 //#ifndef FILWIDTH_PIN // #define FILWIDTH_PIN 5 // Analog Input //#endif // DIO 4 (Servos plug) for the runout sensor. -//#define FIL_RUNOUT_PIN SERVO3_PIN +//#define FIL_RUNOUT_PIN SERVO3_PIN #ifndef PS_ON_PIN - #define PS_ON_PIN 12 + #define PS_ON_PIN 12 #endif // // Case Light // #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) && !defined(SPINDLE_LASER_ENABLE_PIN) - #if !NUM_SERVOS // Prefer the servo connector - #define CASE_LIGHT_PIN 6 // Hardware PWM - #elif HAS_FREE_AUX2_PINS // Try to use AUX 2 - #define CASE_LIGHT_PIN 44 // Hardware PWM + #if !NUM_SERVOS // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM + #elif HAS_FREE_AUX2_PINS // Try to use AUX 2 + #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif @@ -243,14 +243,14 @@ // M3/M4/M5 - Spindle/Laser Control // #if ENABLED(SPINDLE_LASER_ENABLE) && !PIN_EXISTS(SPINDLE_LASER_ENABLE) - #if !NUM_SERVOS // Prefer the servo connector - #define SPINDLE_LASER_ENABLE_PIN 4 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM - #define SPINDLE_DIR_PIN 5 - #elif HAS_FREE_AUX2_PINS // Try to use AUX 2 - #define SPINDLE_LASER_ENABLE_PIN 40 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM - #define SPINDLE_DIR_PIN 65 + #if !NUM_SERVOS // Prefer the servo connector + #define SPINDLE_LASER_ENABLE_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 + #elif HAS_FREE_AUX2_PINS // Try to use AUX 2 + #define SPINDLE_LASER_ENABLE_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 #endif #endif @@ -278,63 +278,63 @@ // #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS 40 - #define LCD_PINS_ENABLE 42 - #define LCD_PINS_D4 65 - #define LCD_PINS_D5 66 - #define LCD_PINS_D6 44 - #define LCD_PINS_D7 64 + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 42 + #define LCD_PINS_D4 65 + #define LCD_PINS_D5 66 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 64 #elif ENABLED(ZONESTAR_LCD) - #define LCD_PINS_RS 64 - #define LCD_PINS_ENABLE 44 - #define LCD_PINS_D4 63 - #define LCD_PINS_D5 40 - #define LCD_PINS_D6 42 - #define LCD_PINS_D7 65 - #define ADC_KEYPAD_PIN 12 + #define LCD_PINS_RS 64 + #define LCD_PINS_ENABLE 44 + #define LCD_PINS_D4 63 + #define LCD_PINS_D5 40 + #define LCD_PINS_D6 42 + #define LCD_PINS_D7 65 + #define ADC_KEYPAD_PIN 12 #else #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 25 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 25 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #endif #else #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306) - #define LCD_PINS_DC 25 // Set as output on init - #define LCD_PINS_RS 27 // Pull low for 1s to init + #define LCD_PINS_DC 25 // Set as output on init + #define LCD_PINS_RS 27 // Pull low for 1s to init // DOGM SPI LCD Support - #define DOGLCD_CS 16 - #define DOGLCD_MOSI 17 - #define DOGLCD_SCK 23 - #define DOGLCD_A0 LCD_PINS_DC + #define DOGLCD_CS 16 + #define DOGLCD_MOSI 17 + #define DOGLCD_SCK 23 + #define DOGLCD_A0 LCD_PINS_DC #else - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 #endif - #define LCD_PINS_D7 29 + #define LCD_PINS_D7 29 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #endif #endif @@ -342,10 +342,10 @@ #if DISABLED(NEWPANEL) // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -357,155 +357,155 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #if ENABLED(CR10_STOCKDISPLAY) - #define BTN_EN1 17 - #define BTN_EN2 23 + #define BTN_EN1 17 + #define BTN_EN2 23 #else - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 31 + #define BTN_EN2 33 #endif - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - //#define KILL_PIN 41 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN 39 + #define LCD_BACKLIGHT_PIN 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 - //#define KILL_PIN 41 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 + //#define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 + #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 #elif EITHER(VIKI2, miniVIKI) - #define DOGLCD_CS 45 - #define DOGLCD_A0 44 + #define DOGLCD_CS 45 + #define DOGLCD_A0 44 #define LCD_SCREEN_ROT_180 - #define BEEPER_PIN 33 - #define STAT_LED_RED_PIN 32 - #define STAT_LED_BLUE_PIN 35 + #define BEEPER_PIN 33 + #define STAT_LED_RED_PIN 32 + #define STAT_LED_BLUE_PIN 35 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 - #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board - //#define KILL_PIN 31 + #define SDSS 53 + #define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board + //#define KILL_PIN 31 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 - #define BEEPER_PIN 23 - #define LCD_BACKLIGHT_PIN 33 + #define BEEPER_PIN 23 + #define LCD_BACKLIGHT_PIN 33 - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 - //#define KILL_PIN 41 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 41 #elif ENABLED(MKS_MINI_12864) - #define DOGLCD_A0 27 - #define DOGLCD_CS 25 + #define DOGLCD_A0 27 + #define DOGLCD_CS 25 // GLCD features - //#define LCD_CONTRAST_INIT 190 + //#define LCD_CONTRAST_INIT 190 // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 - //#define SDSS 53 - #define SD_DETECT_PIN 49 - //#define KILL_PIN 64 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 + //#define SDSS 53 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 64 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // not connected to a pin - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 // GLCD features - //#define LCD_CONTRAST_INIT 190 + //#define LCD_CONTRAST_INIT 190 // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 - #define SDSS 53 - #define SD_DETECT_PIN 49 - //#define KILL_PIN 64 + #define SDSS 53 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 64 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons are directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - //#define KILL_PIN 41 + #define SD_DETECT_PIN 49 + //#define KILL_PIN 41 #endif #endif diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h index 2af64bb2a0..776dfcc3da 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h @@ -44,97 +44,97 @@ // // Limit Switches // -#define X_STOP_PIN 22 -#define Y_STOP_PIN 26 -#define Z_STOP_PIN 29 +#define X_STOP_PIN 22 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 29 // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 27 +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 -#define Y_STEP_PIN 32 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 31 +#define Y_STEP_PIN 32 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 31 -#define Z_STEP_PIN 35 -#define Z_DIR_PIN 36 -#define Z_ENABLE_PIN 34 +#define Z_STEP_PIN 35 +#define Z_DIR_PIN 36 +#define Z_ENABLE_PIN 34 -#define E0_STEP_PIN 42 -#define E0_DIR_PIN 43 -#define E0_ENABLE_PIN 37 +#define E0_STEP_PIN 42 +#define E0_DIR_PIN 43 +#define E0_ENABLE_PIN 37 -#define E1_STEP_PIN 49 -#define E1_DIR_PIN 47 -#define E1_ENABLE_PIN 48 +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 -#define MOTOR_CURRENT_PWM_XY_PIN 44 -#define MOTOR_CURRENT_PWM_Z_PIN 45 -#define MOTOR_CURRENT_PWM_E_PIN 46 +#define MOTOR_CURRENT_PWM_XY_PIN 44 +#define MOTOR_CURRENT_PWM_Z_PIN 45 +#define MOTOR_CURRENT_PWM_E_PIN 46 // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #ifndef MOTOR_CURRENT_PWM_RANGE - #define MOTOR_CURRENT_PWM_RANGE 2000 + #define MOTOR_CURRENT_PWM_RANGE 2000 #endif #define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250} // // Temperature Sensors // -#define TEMP_0_PIN 8 // Analog Input -#define TEMP_1_PIN 9 // Analog Input -#define TEMP_BED_PIN 10 // Analog Input +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 7 + #define FAN_PIN 7 #endif -#define ORIG_E0_AUTO_FAN_PIN 77 +#define ORIG_E0_AUTO_FAN_PIN 77 // // Misc. Functions // -#define SDSS 53 -#define SD_DETECT_PIN 39 -#define LED_PIN 8 -#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered -#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. +#define SDSS 53 +#define SD_DETECT_PIN 39 +#define LED_PIN 8 +#define SAFETY_TRIGGERED_PIN 28 // PIN to detect the safety circuit has triggered +#define MAIN_VOLTAGE_MEASURE_PIN 14 // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider. // // LCD / Controller // -#define BEEPER_PIN 18 +#define BEEPER_PIN 18 -#define LCD_PINS_RS 20 -#define LCD_PINS_ENABLE 15 -#define LCD_PINS_D4 14 -#define LCD_PINS_D5 21 -#define LCD_PINS_D6 5 -#define LCD_PINS_D7 6 +#define LCD_PINS_RS 20 +#define LCD_PINS_ENABLE 15 +#define LCD_PINS_D4 14 +#define LCD_PINS_D5 21 +#define LCD_PINS_D6 5 +#define LCD_PINS_D7 6 // Buttons are directly attached -#define BTN_EN1 40 -#define BTN_EN2 41 -#define BTN_ENC 19 +#define BTN_EN1 40 +#define BTN_EN2 41 +#define BTN_ENC 19 // // M3/M4/M5 - Spindle/Laser Control // -#if HAS_CUTTER // use the LED_PIN for spindle speed control or case light +#if HAS_CUTTER // use the LED_PIN for spindle speed control or case light #undef LED_PIN - #define SPINDLE_DIR_PIN 16 - #define SPINDLE_LASER_ENA_PIN 17 // Pullup! - #define SPINDLE_LASER_PWM_PIN 8 // Hardware PWM + #define SPINDLE_DIR_PIN 16 + #define SPINDLE_LASER_ENA_PIN 17 // Pullup! + #define SPINDLE_LASER_PWM_PIN 8 // Hardware PWM #else #undef LED_PIN - #define CASE_LIGHT_PIN 8 + #define CASE_LIGHT_PIN 8 #endif diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index 8a48b07de7..8cc588a2f9 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -44,114 +44,114 @@ // // Servos // -#define SERVO0_PIN 11 +#define SERVO0_PIN 11 // // Limit Switches // -#define X_MIN_PIN 22 -#define X_MAX_PIN 24 -#define Y_MIN_PIN 26 -#define Y_MAX_PIN 28 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 32 +#define X_MIN_PIN 22 +#define X_MAX_PIN 24 +#define Y_MIN_PIN 26 +#define Y_MAX_PIN 28 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 32 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 27 +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 29 +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 -#define Z_STEP_PIN 37 -#define Z_DIR_PIN 39 -#define Z_ENABLE_PIN 35 +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 -#define E0_STEP_PIN 43 -#define E0_DIR_PIN 45 -#define E0_ENABLE_PIN 41 +#define E0_STEP_PIN 43 +#define E0_DIR_PIN 45 +#define E0_ENABLE_PIN 41 -#define E1_STEP_PIN 49 -#define E1_DIR_PIN 47 -#define E1_ENABLE_PIN 48 +#define E1_STEP_PIN 49 +#define E1_DIR_PIN 47 +#define E1_ENABLE_PIN 48 // // Temperature Sensors // -#define TEMP_0_PIN 8 // Analog Input -#define TEMP_1_PIN 9 // Analog Input -#define TEMP_BED_PIN 10 // Analog Input +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 9 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -#define HEATER_1_PIN 3 -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +#define HEATER_1_PIN 3 +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 7 + #define FAN_PIN 7 #endif // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 -#define PS_ON_PIN 12 -#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing. -#define CASE_LIGHT_PIN 8 +#define SDSS 53 +#define LED_PIN 13 +#define PS_ON_PIN 12 +#define SUICIDE_PIN 54 // PIN that has to be turned on right after start, to keep power flowing. +#define CASE_LIGHT_PIN 8 // // LCD / Controller // #if HAS_SPI_LCD - #define BEEPER_PIN 18 + #define BEEPER_PIN 18 #if ENABLED(NEWPANEL) - #define LCD_PINS_RS 20 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 16 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 // Buttons directly attached - #define BTN_EN1 40 - #define BTN_EN2 42 - #define BTN_ENC 19 + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 - #define SD_DETECT_PIN 38 + #define SD_DETECT_PIN 38 - #else // !NEWPANEL - Old style panel with shift register + #else // !NEWPANEL - Old style panel with shift register // Buttons attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 6 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 20 - #define LCD_PINS_D7 19 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 - #define SD_DETECT_PIN -1 + #define SD_DETECT_PIN -1 #endif // !NEWPANEL @@ -160,6 +160,6 @@ // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM -#define SPINDLE_LASER_ENA_PIN 10 // Pullup! -#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header +#define SPINDLE_LASER_PWM_PIN 9 // Hardware PWM +#define SPINDLE_LASER_ENA_PIN 10 // Pullup! +#define SPINDLE_DIR_PIN 11 // use the EXP3 PWM header diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h index e128dc98d2..dc12442224 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER_OLD.h @@ -80,134 +80,134 @@ // Limit Switches // #if ENABLED(BOARD_REV_1_1_TO_1_3) - #define X_MIN_PIN 15 // SW1 - #define X_MAX_PIN 14 // SW2 - #define Y_MIN_PIN 17 // SW3 - #define Y_MAX_PIN 16 // SW4 - #define Z_MIN_PIN 19 // SW5 - #define Z_MAX_PIN 18 // SW6 + #define X_MIN_PIN 15 // SW1 + #define X_MAX_PIN 14 // SW2 + #define Y_MIN_PIN 17 // SW3 + #define Y_MAX_PIN 16 // SW4 + #define Z_MIN_PIN 19 // SW5 + #define Z_MAX_PIN 18 // SW6 #endif #if ENABLED(BOARD_REV_1_0) #if HAS_CUTTER - #define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM - #define Y_STOP_PIN 12 // SW2 - #define Z_STOP_PIN 11 // SW3 + #define X_STOP_PIN 13 // SW1 (didn't change) - also has a useable hardware PWM + #define Y_STOP_PIN 12 // SW2 + #define Z_STOP_PIN 11 // SW3 #else - #define X_MIN_PIN 13 // SW1 - #define X_MAX_PIN 12 // SW2 - #define Y_MIN_PIN 11 // SW3 - #define Y_MAX_PIN 10 // SW4 - #define Z_MIN_PIN 9 // SW5 - #define Z_MAX_PIN 8 // SW6 + #define X_MIN_PIN 13 // SW1 + #define X_MAX_PIN 12 // SW2 + #define Y_MIN_PIN 11 // SW3 + #define Y_MAX_PIN 10 // SW4 + #define Z_MIN_PIN 9 // SW5 + #define Z_MAX_PIN 8 // SW6 #endif #endif #if ENABLED(BOARD_REV_1_5) - #define X_MIN_PIN 22 - #define X_MAX_PIN 24 - #define Y_MIN_PIN 26 - #define Y_MAX_PIN 28 - #define Z_MIN_PIN 30 - #define Z_MAX_PIN 32 + #define X_MIN_PIN 22 + #define X_MAX_PIN 24 + #define Y_MIN_PIN 26 + #define Y_MAX_PIN 28 + #define Z_MIN_PIN 30 + #define Z_MAX_PIN 32 #endif // // Z Probe (when not Z_MIN_PIN) // #if !defined(Z_MIN_PROBE_PIN) && !(HAS_CUTTER && ENABLED(BOARD_REV_1_0)) - #define Z_MIN_PROBE_PIN Z_MAX_PIN + #define Z_MIN_PROBE_PIN Z_MAX_PIN #endif // // Steppers // -#define X_STEP_PIN 25 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 27 +#define X_STEP_PIN 25 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 27 -#define Y_STEP_PIN 31 -#define Y_DIR_PIN 33 -#define Y_ENABLE_PIN 29 +#define Y_STEP_PIN 31 +#define Y_DIR_PIN 33 +#define Y_ENABLE_PIN 29 -#define Z_STEP_PIN 37 -#define Z_DIR_PIN 39 -#define Z_ENABLE_PIN 35 +#define Z_STEP_PIN 37 +#define Z_DIR_PIN 39 +#define Z_ENABLE_PIN 35 #if HAS_CUTTER && ENABLED(BOARD_REV_1_1_TO_1_3) && EXTRUDERS == 1 // Move E0 to the spare and get Spindle/Laser signals from E0 - #define E0_STEP_PIN 49 - #define E0_DIR_PIN 47 - #define E0_ENABLE_PIN 48 + #define E0_STEP_PIN 49 + #define E0_DIR_PIN 47 + #define E0_ENABLE_PIN 48 #else - #define E0_STEP_PIN 43 - #define E0_DIR_PIN 45 - #define E0_ENABLE_PIN 41 + #define E0_STEP_PIN 43 + #define E0_DIR_PIN 45 + #define E0_ENABLE_PIN 41 - #define E1_STEP_PIN 49 - #define E1_DIR_PIN 47 - #define E1_ENABLE_PIN 48 + #define E1_STEP_PIN 49 + #define E1_DIR_PIN 47 + #define E1_ENABLE_PIN 48 #endif // // Temperature Sensors // -#define TEMP_0_PIN 8 // Analog Input -#define TEMP_1_PIN 1 // Analog Input +#define TEMP_0_PIN 8 // Analog Input +#define TEMP_1_PIN 1 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 2 -//#define HEATER_1_PIN 3 // used for case light Rev A said "1" -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 2 +//#define HEATER_1_PIN 3 // used for case light Rev A said "1" +#define HEATER_BED_PIN 4 // // LCD / Controller // #if ANY(BOARD_REV_1_0, BOARD_REV_1_1_TO_1_3) - #define LCD_PINS_RS 24 - #define LCD_PINS_ENABLE 22 - #define LCD_PINS_D4 36 - #define LCD_PINS_D5 34 - #define LCD_PINS_D6 32 - #define LCD_PINS_D7 30 + #define LCD_PINS_RS 24 + #define LCD_PINS_ENABLE 22 + #define LCD_PINS_D4 36 + #define LCD_PINS_D5 34 + #define LCD_PINS_D6 32 + #define LCD_PINS_D7 30 #elif ENABLED(BOARD_REV_1_5, ULTRA_LCD) - #define BEEPER_PIN 18 + #define BEEPER_PIN 18 #if ENABLED(NEWPANEL) - #define LCD_PINS_RS 20 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 16 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 5 - #define LCD_PINS_D7 6 + #define LCD_PINS_RS 20 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 5 + #define LCD_PINS_D7 6 // Buttons directly attached - #define BTN_EN1 40 - #define BTN_EN2 42 - #define BTN_ENC 19 + #define BTN_EN1 40 + #define BTN_EN2 42 + #define BTN_ENC 19 - #define SD_DETECT_PIN 38 + #define SD_DETECT_PIN 38 - #else // !NEWPANEL - Old style panel with shift register + #else // !NEWPANEL - Old style panel with shift register // Buttons attached to a shift register - #define SHIFT_CLK 38 - #define SHIFT_LD 42 - #define SHIFT_OUT 40 - #define SHIFT_EN 17 + #define SHIFT_CLK 38 + #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_EN 17 - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 5 - #define LCD_PINS_D4 6 - #define LCD_PINS_D5 21 - #define LCD_PINS_D6 20 - #define LCD_PINS_D7 19 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 5 + #define LCD_PINS_D4 6 + #define LCD_PINS_D5 21 + #define LCD_PINS_D6 20 + #define LCD_PINS_D7 19 #endif // !NEWPANEL @@ -217,17 +217,17 @@ // case light - see spindle section for more info on available hardware PWMs // #if !PIN_EXISTS(CASE_LIGHT) && ENABLED(BOARD_REV_1_5) - #define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM + #define CASE_LIGHT_PIN 7 // use PWM - MUST BE HARDWARE PWM #endif // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER - #if EITHER(BOARD_REV_1_0, BOARD_REV_1_5) // Use the last three SW positions - #define SPINDLE_DIR_PIN 10 // 1.0: SW4 1.5: EXP3-6 ("10") - #define SPINDLE_LASER_PWM_PIN 9 // 1.0: SW5 1.5: EXP3-7 ( "9") .. MUST BE HARDWARE PWM - #define SPINDLE_LASER_ENA_PIN 8 // 1.0: SW6 1.5: EXP3-8 ( "8") .. Pin should have a pullup! + #if EITHER(BOARD_REV_1_0, BOARD_REV_1_5) // Use the last three SW positions + #define SPINDLE_DIR_PIN 10 // 1.0: SW4 1.5: EXP3-6 ("10") + #define SPINDLE_LASER_PWM_PIN 9 // 1.0: SW5 1.5: EXP3-7 ( "9") .. MUST BE HARDWARE PWM + #define SPINDLE_LASER_ENA_PIN 8 // 1.0: SW6 1.5: EXP3-8 ( "8") .. Pin should have a pullup! #elif ENABLED(BOARD_REV_1_1_TO_1_3) /** * Only four hardware PWMs physically connected to anything on these boards: @@ -241,14 +241,14 @@ * They have an LED and resistor pullup to +24V which could damage 3.3V-5V ICs. */ #if EXTRUDERS == 1 - #define SPINDLE_DIR_PIN 43 - #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 41 // Pullup! - #elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available + #define SPINDLE_DIR_PIN 43 + #define SPINDLE_LASER_PWM_PIN 45 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 41 // Pullup! + #elif TEMP_SENSOR_BED == 0 // Can't use E0 so see if HEATER_BED_PIN is available #undef HEATER_BED_PIN - #define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket - #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - Special precautions usually needed. - #define SPINDLE_LASER_ENA_PIN 40 // Pullup! (Probably pin 6 on the 10-pin + #define SPINDLE_DIR_PIN 38 // Probably pin 4 on 10 pin connector closest to the E0 socket + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - Special precautions usually needed. + #define SPINDLE_LASER_ENA_PIN 40 // Pullup! (Probably pin 6 on the 10-pin // connector closest to the E0 socket) #endif #endif diff --git a/Marlin/src/pins/ramps/pins_VORON.h b/Marlin/src/pins/ramps/pins_VORON.h index a6cb05928a..12c0a36db1 100644 --- a/Marlin/src/pins/ramps/pins_VORON.h +++ b/Marlin/src/pins/ramps/pins_VORON.h @@ -28,7 +28,7 @@ #define BOARD_INFO_NAME "VORON Design v2" -#define RAMPS_D8_PIN 11 +#define RAMPS_D8_PIN 11 #include "pins_RAMPS.h" @@ -36,10 +36,10 @@ // Heaters / Fans // #undef FAN_PIN -#define FAN_PIN 5 // Using the pin for the controller fan since controller fan is always on. -#define CONTROLLER_FAN_PIN 8 -#define ORIG_E0_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan -#define ORIG_E1_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan (same pin for both extruders since it's the same fan) +#define FAN_PIN 5 // Using the pin for the controller fan since controller fan is always on. +#define CONTROLLER_FAN_PIN 8 +#define ORIG_E0_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan +#define ORIG_E1_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan (same pin for both extruders since it's the same fan) // // LCDs and Controllers diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V20.h b/Marlin/src/pins/ramps/pins_ZRIB_V20.h index 450ad1f825..5aee07c96f 100644 --- a/Marlin/src/pins/ramps/pins_ZRIB_V20.h +++ b/Marlin/src/pins/ramps/pins_ZRIB_V20.h @@ -28,24 +28,24 @@ #include "pins_MKS_GEN_13.h" -#define ZRIB_V20_D6_PIN 6 // Fan -#define ZRIB_V20_D9_PIN 9 // Fan2 -#define ZRIB_V20_A10_PIN 10 -#define ZRIB_V20_D16_PIN 16 -#define ZRIB_V20_D17_PIN 17 -#define ZRIB_V20_D23_PIN 23 -#define ZRIB_V20_D25_PIN 25 -#define ZRIB_V20_D27_PIN 27 -#define ZRIB_V20_D29_PIN 29 -#define ZRIB_V20_D37_PIN 37 +#define ZRIB_V20_D6_PIN 6 // Fan +#define ZRIB_V20_D9_PIN 9 // Fan2 +#define ZRIB_V20_A10_PIN 10 +#define ZRIB_V20_D16_PIN 16 +#define ZRIB_V20_D17_PIN 17 +#define ZRIB_V20_D23_PIN 23 +#define ZRIB_V20_D25_PIN 25 +#define ZRIB_V20_D27_PIN 27 +#define ZRIB_V20_D29_PIN 29 +#define ZRIB_V20_D37_PIN 37 -#define ORIG_E0_AUTO_FAN_PIN ZRIB_V20_D6_PIN -#define ORIG_E1_AUTO_FAN_PIN ZRIB_V20_D6_PIN -#define ORIG_E2_AUTO_FAN_PIN ZRIB_V20_D6_PIN -#define ORIG_E3_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#define ORIG_E0_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#define ORIG_E1_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#define ORIG_E2_AUTO_FAN_PIN ZRIB_V20_D6_PIN +#define ORIG_E3_AUTO_FAN_PIN ZRIB_V20_D6_PIN #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 11 // Analog Input + #define FILWIDTH_PIN 11 // Analog Input #endif #if ENABLED(ZONESTAR_LCD) @@ -58,12 +58,12 @@ #undef ADC_KEYPAD_PIN #undef BEEPER_PIN - #define LCD_PINS_RS ZRIB_V20_D16_PIN - #define LCD_PINS_ENABLE ZRIB_V20_D17_PIN - #define LCD_PINS_D4 ZRIB_V20_D23_PIN - #define LCD_PINS_D5 ZRIB_V20_D25_PIN - #define LCD_PINS_D6 ZRIB_V20_D27_PIN - #define LCD_PINS_D7 ZRIB_V20_D29_PIN - #define ADC_KEYPAD_PIN ZRIB_V20_A10_PIN - #define BEEPER_PIN ZRIB_V20_D37_PIN + #define LCD_PINS_RS ZRIB_V20_D16_PIN + #define LCD_PINS_ENABLE ZRIB_V20_D17_PIN + #define LCD_PINS_D4 ZRIB_V20_D23_PIN + #define LCD_PINS_D5 ZRIB_V20_D25_PIN + #define LCD_PINS_D6 ZRIB_V20_D27_PIN + #define LCD_PINS_D7 ZRIB_V20_D29_PIN + #define ADC_KEYPAD_PIN ZRIB_V20_A10_PIN + #define BEEPER_PIN ZRIB_V20_D37_PIN #endif diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h index 9808646d32..f55ec51567 100644 --- a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h +++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h @@ -37,129 +37,129 @@ // Servos // #ifndef SERVO0_PIN - #define SERVO0_PIN 11 + #define SERVO0_PIN 11 #endif #ifndef SERVO3_PIN - #define SERVO3_PIN 4 + #define SERVO3_PIN 4 #endif // // Limit Switches // -#define X_MIN_PIN 3 +#define X_MIN_PIN 3 #ifndef X_MAX_PIN - #define X_MAX_PIN 2 + #define X_MAX_PIN 2 #endif -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 54 -#define X_DIR_PIN 55 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 54 +#define X_DIR_PIN 55 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN -1 + #define X_CS_PIN -1 #endif -#define Y_STEP_PIN 60 -#define Y_DIR_PIN 61 -#define Y_ENABLE_PIN 56 +#define Y_STEP_PIN 60 +#define Y_DIR_PIN 61 +#define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN -1 + #define Y_CS_PIN -1 #endif -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 62 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 62 #ifndef Z_CS_PIN - #define Z_CS_PIN -1 + #define Z_CS_PIN -1 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN -1 + #define E0_CS_PIN -1 #endif -#define E1_STEP_PIN 36 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 30 +#define E1_STEP_PIN 36 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 30 #ifndef E1_CS_PIN - #define E1_CS_PIN -1 + #define E1_CS_PIN -1 #endif // Red -#define E2_STEP_PIN 42 -#define E2_DIR_PIN 40 -#define E2_ENABLE_PIN 65 +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 40 +#define E2_ENABLE_PIN 65 #ifndef E2_CS_PIN - #define E2_CS_PIN -1 + #define E2_CS_PIN -1 #endif // Black -#define E3_STEP_PIN 44 -#define E3_DIR_PIN 64 -#define E3_ENABLE_PIN 66 +#define E3_STEP_PIN 44 +#define E3_DIR_PIN 64 +#define E3_ENABLE_PIN 66 #ifndef E3_CS_PIN - #define E3_CS_PIN -1 + #define E3_CS_PIN -1 #endif // // Temperature Sensors // -#define TEMP_0_PIN 13 // Analog Input -#define TEMP_1_PIN 15 // Analog Input -#define TEMP_2_PIN 5 // Analog Input (BLACK) -#define TEMP_3_PIN 9 // Analog Input (RED) -#define TEMP_BED_PIN 14 // Analog Input +#define TEMP_0_PIN 13 // Analog Input +#define TEMP_1_PIN 15 // Analog Input +#define TEMP_2_PIN 5 // Analog Input (BLACK) +#define TEMP_3_PIN 9 // Analog Input (RED) +#define TEMP_BED_PIN 14 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_1_PIN 7 -#define HEATER_2_PIN 6 -#define HEATER_3_PIN 5 -#define HEATER_BED_PIN 8 +#define HEATER_0_PIN 10 +#define HEATER_1_PIN 7 +#define HEATER_2_PIN 6 +#define HEATER_3_PIN 5 +#define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN_PIN 9 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 +#define SDSS 53 +#define LED_PIN 13 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 5 // Analog Input on AUX2 + #define FILWIDTH_PIN 5 // Analog Input on AUX2 #endif // Оn the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 4 + #define FIL_RUNOUT_PIN 4 #endif #ifndef PS_ON_PIN - #define PS_ON_PIN 12 + #define PS_ON_PIN 12 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) - #if NUM_SERVOS <= 1 // Prefer the servo connector - #define CASE_LIGHT_PIN 6 // Hardware PWM + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM #elif HAS_FREE_AUX2_PINS - #define CASE_LIGHT_PIN 44 // Hardware PWM + #define CASE_LIGHT_PIN 44 // Hardware PWM #endif #endif @@ -167,14 +167,14 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) - #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector - #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM - #define SPINDLE_DIR_PIN 5 + #if !defined(NUM_SERVOS) || NUM_SERVOS == 0 // Prefer the servo connector + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 #elif HAS_FREE_AUX2_PINS - #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM - #define SPINDLE_DIR_PIN 65 + #define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM + #define SPINDLE_DIR_PIN 65 #endif #endif @@ -183,13 +183,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI 66 + #define TMC_SW_MOSI 66 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO 44 + #define TMC_SW_MISO 44 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK 64 + #define TMC_SW_SCK 64 #endif #endif @@ -217,90 +217,90 @@ // #ifndef X_SERIAL_TX_PIN - #define X_SERIAL_TX_PIN 40 + #define X_SERIAL_TX_PIN 40 #endif #ifndef X_SERIAL_RX_PIN - #define X_SERIAL_RX_PIN 63 + #define X_SERIAL_RX_PIN 63 #endif #ifndef X2_SERIAL_TX_PIN - #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN - #define X2_SERIAL_RX_PIN -1 + #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN - #define Y_SERIAL_TX_PIN 59 + #define Y_SERIAL_TX_PIN 59 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN 64 + #define Y_SERIAL_RX_PIN 64 #endif #ifndef Y2_SERIAL_TX_PIN - #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN - #define Y2_SERIAL_RX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN - #define Z_SERIAL_TX_PIN 42 + #define Z_SERIAL_TX_PIN 42 #endif #ifndef Z_SERIAL_RX_PIN - #define Z_SERIAL_RX_PIN 65 + #define Z_SERIAL_RX_PIN 65 #endif #ifndef Z2_SERIAL_TX_PIN - #define Z2_SERIAL_TX_PIN -1 + #define Z2_SERIAL_TX_PIN -1 #endif #ifndef Z2_SERIAL_RX_PIN - #define Z2_SERIAL_RX_PIN -1 + #define Z2_SERIAL_RX_PIN -1 #endif #ifndef E0_SERIAL_TX_PIN - #define E0_SERIAL_TX_PIN 44 + #define E0_SERIAL_TX_PIN 44 #endif #ifndef E0_SERIAL_RX_PIN - #define E0_SERIAL_RX_PIN 66 + #define E0_SERIAL_RX_PIN 66 #endif #ifndef E1_SERIAL_TX_PIN - #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN - #define E1_SERIAL_RX_PIN -1 + #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN - #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN - #define E2_SERIAL_RX_PIN -1 + #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN - #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN - #define E3_SERIAL_RX_PIN -1 + #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN - #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN - #define E4_SERIAL_RX_PIN -1 + #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN - #define E5_SERIAL_TX_PIN -1 + #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN - #define E5_SERIAL_RX_PIN -1 + #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN - #define E6_SERIAL_TX_PIN -1 + #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN - #define E6_SERIAL_RX_PIN -1 + #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN - #define E7_SERIAL_TX_PIN -1 + #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN - #define E7_SERIAL_RX_PIN -1 + #define E7_SERIAL_RX_PIN -1 #endif #endif diff --git a/Marlin/src/pins/sam/pins_ADSK.h b/Marlin/src/pins/sam/pins_ADSK.h index 3a38e5ce16..61c2e1b494 100644 --- a/Marlin/src/pins/sam/pins_ADSK.h +++ b/Marlin/src/pins/sam/pins_ADSK.h @@ -81,55 +81,55 @@ A stepper for E0 extruder // // Servos // -#define SERVO0_PIN 61 // Analog pin 7, Digital pin 61 +#define SERVO0_PIN 61 // Analog pin 7, Digital pin 61 // // Limit Switches // -#define X_MIN_PIN 9 -#define Y_MIN_PIN 10 -#define Z_MIN_PIN 11 +#define X_MIN_PIN 9 +#define Y_MIN_PIN 10 +#define Z_MIN_PIN 11 -#define Z_MIN_PROBE_PIN 62 // Analog pin 8, Digital pin 62 +#define Z_MIN_PROBE_PIN 62 // Analog pin 8, Digital pin 62 // // Steppers // -#define X_STEP_PIN 2 -#define X_DIR_PIN 5 -#define X_ENABLE_PIN 8 +#define X_STEP_PIN 2 +#define X_DIR_PIN 5 +#define X_ENABLE_PIN 8 -#define Y_STEP_PIN 3 -#define Y_DIR_PIN 6 -#define Y_ENABLE_PIN 8 +#define Y_STEP_PIN 3 +#define Y_DIR_PIN 6 +#define Y_ENABLE_PIN 8 -#define Z_STEP_PIN 4 -#define Z_DIR_PIN 7 -#define Z_ENABLE_PIN 8 +#define Z_STEP_PIN 4 +#define Z_DIR_PIN 7 +#define Z_ENABLE_PIN 8 -#define E0_STEP_PIN 12 -#define E0_DIR_PIN 13 -#define E0_ENABLE_PIN 8 +#define E0_STEP_PIN 12 +#define E0_DIR_PIN 13 +#define E0_ENABLE_PIN 8 // // Heaters / Fans // -#define HEATER_0_PIN 55 // "Hold": Analog pin 1, Digital pin 55 -#define HEATER_BED_PIN 57 // "CoolEn": Analog pin 3, Digital pin 57 -#define FAN_PIN 54 // "Abort": Analog pin 0, Digital pin 54 +#define HEATER_0_PIN 55 // "Hold": Analog pin 1, Digital pin 55 +#define HEATER_BED_PIN 57 // "CoolEn": Analog pin 3, Digital pin 57 +#define FAN_PIN 54 // "Abort": Analog pin 0, Digital pin 54 #undef E0_AUTO_FAN_PIN -#define E0_AUTO_FAN_PIN 56 // "Resume": Analog pin 2, Digital pin 56 +#define E0_AUTO_FAN_PIN 56 // "Resume": Analog pin 2, Digital pin 56 // // Temperature Sensors // -#define TEMP_0_PIN 4 // "SDA": Analog pin 4, Digital pin 58 -#define TEMP_BED_PIN 5 // "SCL": Analog pin 5, Digital pin 59 +#define TEMP_0_PIN 4 // "SDA": Analog pin 4, Digital pin 58 +#define TEMP_BED_PIN 5 // "SCL": Analog pin 5, Digital pin 59 // // Misc. Functions // -#define SDSS 52 +#define SDSS 52 #if ENABLED(ZONESTAR_LCD) @@ -160,13 +160,13 @@ A stepper for E0 extruder // // LCD / Controller // - #define LCD_PINS_ENABLE 14 - #define LCD_PINS_RS 15 - #define LCD_PINS_D4 16 - #define LCD_PINS_D5 17 - #define LCD_PINS_D6 18 - #define LCD_PINS_D7 19 - #define ADC_KEYPAD_PIN 6 //60 // Analog pin 6, Digital pin 60 + #define LCD_PINS_ENABLE 14 + #define LCD_PINS_RS 15 + #define LCD_PINS_D4 16 + #define LCD_PINS_D5 17 + #define LCD_PINS_D6 18 + #define LCD_PINS_D7 19 + #define ADC_KEYPAD_PIN 6 //60 // Analog pin 6, Digital pin 60 /** * The below defines will scale all the values to work properly on both diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index 619d7f62c7..8b035e8876 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -35,126 +35,126 @@ // // Servos // -#define SERVO0_PIN 36 -#define SERVO1_PIN 40 -#define SERVO2_PIN 41 -#define SERVO3_PIN -1 +#define SERVO0_PIN 36 +#define SERVO1_PIN 40 +#define SERVO2_PIN 41 +#define SERVO3_PIN -1 // // Limit Switches // -#define X_MIN_PIN 33 // PC1 -#define X_MAX_PIN 34 // PC2 -#define Y_MIN_PIN 35 // PC3 -#define Y_MAX_PIN 37 // PC5 -#define Z_MIN_PIN 38 // PC6 -#define Z_MAX_PIN 39 // PC7 +#define X_MIN_PIN 33 // PC1 +#define X_MAX_PIN 34 // PC2 +#define Y_MIN_PIN 35 // PC3 +#define Y_MAX_PIN 37 // PC5 +#define Z_MIN_PIN 38 // PC6 +#define Z_MAX_PIN 39 // PC7 // // Steppers // -#define X_STEP_PIN 96 // PB24 -#define X_DIR_PIN 2 // PB25 -#define X_ENABLE_PIN 24 // PA15, motor RESET pin +#define X_STEP_PIN 96 // PB24 +#define X_DIR_PIN 2 // PB25 +#define X_ENABLE_PIN 24 // PA15, motor RESET pin -#define Y_STEP_PIN 94 // PB22 -#define Y_DIR_PIN 95 // PB23 -#define Y_ENABLE_PIN 24 // PA15, motor RESET pin +#define Y_STEP_PIN 94 // PB22 +#define Y_DIR_PIN 95 // PB23 +#define Y_ENABLE_PIN 24 // PA15, motor RESET pin -#define Z_STEP_PIN 98 // PC27 -#define Z_DIR_PIN 3 // PC28 -#define Z_ENABLE_PIN 24 // PA15, motor RESET pin +#define Z_STEP_PIN 98 // PC27 +#define Z_DIR_PIN 3 // PC28 +#define Z_ENABLE_PIN 24 // PA15, motor RESET pin -#define E0_STEP_PIN 5 // PC25 -#define E0_DIR_PIN 4 // PC26 -#define E0_ENABLE_PIN 24 // PA15, motor RESET pin +#define E0_STEP_PIN 5 // PC25 +#define E0_DIR_PIN 4 // PC26 +#define E0_ENABLE_PIN 24 // PA15, motor RESET pin -#define E1_STEP_PIN 28 // PD3 on piggy -#define E1_DIR_PIN 27 // PD2 on piggy -#define E1_ENABLE_PIN 24 // PA15, motor RESET pin +#define E1_STEP_PIN 28 // PD3 on piggy +#define E1_DIR_PIN 27 // PD2 on piggy +#define E1_ENABLE_PIN 24 // PA15, motor RESET pin -#define E2_STEP_PIN 11 // PD7 on piggy -#define E2_DIR_PIN 29 // PD6 on piggy -#define E2_ENABLE_PIN 24 // PA15, motor RESET pin +#define E2_STEP_PIN 11 // PD7 on piggy +#define E2_DIR_PIN 29 // PD6 on piggy +#define E2_ENABLE_PIN 24 // PA15, motor RESET pin -#define E3_STEP_PIN 30 // PD9 on piggy -#define E3_DIR_PIN 12 // PD8 on piggy -#define E3_ENABLE_PIN 24 // PA15, motor RESET pin +#define E3_STEP_PIN 30 // PD9 on piggy +#define E3_DIR_PIN 12 // PD8 on piggy +#define E3_ENABLE_PIN 24 // PA15, motor RESET pin // Microstepping pins - Mapping not from fastio.h (?) -#define X_MS1_PIN 99 // PC10 -#define Y_MS1_PIN 10 // PC29 -#define Z_MS1_PIN 44 // PC19 -#define E0_MS1_PIN 45 // PC18 +#define X_MS1_PIN 99 // PC10 +#define Y_MS1_PIN 10 // PC29 +#define Z_MS1_PIN 44 // PC19 +#define E0_MS1_PIN 45 // PC18 -//#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT +//#define MOTOR_FAULT_PIN 22 // PB26 , motor X-Y-Z-E0 motor FAULT // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input (PA24) -#define TEMP_1_PIN 2 // Analog Input (PA23 on piggy) -#define TEMP_2_PIN 3 // Analog Input (PA22 on piggy) -#define TEMP_3_PIN 4 // Analog Input (PA6 on piggy) -#define TEMP_BED_PIN 0 // Analog Input (PA16) +#define TEMP_0_PIN 1 // Analog Input (PA24) +#define TEMP_1_PIN 2 // Analog Input (PA23 on piggy) +#define TEMP_2_PIN 3 // Analog Input (PA22 on piggy) +#define TEMP_3_PIN 4 // Analog Input (PA6 on piggy) +#define TEMP_BED_PIN 0 // Analog Input (PA16) // // Heaters / Fans // // Note that on the Due pin A0 on the board is channel 2 on the ARM chip -#define HEATER_0_PIN 68 // PA1 -#define HEATER_1_PIN 8 // PC22 on piggy -#define HEATER_2_PIN 9 // PC21 on piggy -#define HEATER_3_PIN 97 // PC20 on piggy -#define HEATER_BED_PIN 69 // PA0 +#define HEATER_0_PIN 68 // PA1 +#define HEATER_1_PIN 8 // PC22 on piggy +#define HEATER_2_PIN 9 // PC21 on piggy +#define HEATER_3_PIN 97 // PC20 on piggy +#define HEATER_BED_PIN 69 // PA0 #ifndef FAN_PIN - #define FAN_PIN 92 // PA5 + #define FAN_PIN 92 // PA5 #endif -#define FAN1_PIN 31 // PA7 +#define FAN1_PIN 31 // PA7 // // Misc. Functions // -#define SDSS 77 // PA28 -#define SD_DETECT_PIN 87 // PA29 -#define LED_RED_PIN 40 // PC8 -#define LED_GREEN_PIN 41 // PC9 +#define SDSS 77 // PA28 +#define SD_DETECT_PIN 87 // PA29 +#define LED_RED_PIN 40 // PC8 +#define LED_GREEN_PIN 41 // PC9 -#define EXP_VOLTAGE_LEVEL_PIN 65 +#define EXP_VOLTAGE_LEVEL_PIN 65 -#define SPI_CHAN_DAC 1 +#define SPI_CHAN_DAC 1 -#define DAC0_SYNC 53 // PB14 -#define DAC1_SYNC 6 // PC24 +#define DAC0_SYNC 53 // PB14 +#define DAC1_SYNC 6 // PC24 // 64K SPI EEPROM #define SPI_EEPROM -#define SPI_CHAN_EEPROM1 2 -#define SPI_EEPROM1_CS 25 // PD0 +#define SPI_CHAN_EEPROM1 2 +#define SPI_EEPROM1_CS 25 // PD0 // 2K SPI EEPROM -#define SPI_EEPROM2_CS 26 // PD1 +#define SPI_EEPROM2_CS 26 // PD1 // FLASH SPI // 32Mb -#define SPI_FLASH_CS 23 // PA14 +#define SPI_FLASH_CS 23 // PA14 // // LCD / Controller // #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define LCD_PINS_RS 18 - #define LCD_PINS_ENABLE 15 - #define LCD_PINS_D4 19 - #define BEEPER_PIN 64 + #define LCD_PINS_RS 18 + #define LCD_PINS_ENABLE 15 + #define LCD_PINS_D4 19 + #define BEEPER_PIN 64 - #define BTN_EN1 14 - #define BTN_EN2 16 - #define BTN_ENC 17 + #define BTN_EN1 14 + #define BTN_EN2 16 + #define BTN_ENC 17 #undef UI_VOLTAGE_LEVEL - #define UI_VOLTAGE_LEVEL 1 + #define UI_VOLTAGE_LEVEL 1 #endif // REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h index ddc9f407ec..606e024697 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM1.h +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -46,7 +46,7 @@ // // Timers // -#define STEP_TIMER_NUM 3 +#define STEP_TIMER_NUM 3 #define HAL_STEP_TIMER_ISR() void TC3_Handler() // @@ -56,147 +56,145 @@ // // Servos // -#define SERVO0_PIN 20 // D20 PB12 (Header J20 20) -#define SERVO1_PIN 21 // D21 PB13 (Header J20 19) - +#define SERVO0_PIN 20 // D20 PB12 (Header J20 20) +#define SERVO1_PIN 21 // D21 PB13 (Header J20 19) // // Limit Switches // -#define X_MIN_PIN 14 // PD4 MIN ES1 -#define X_MAX_PIN 32 // PD10 MAX ES1 -#define Y_MIN_PIN 29 // PD6 MIN ES2 -#define Y_MAX_PIN 15 // PD5 MAX ES2 -#define Z_MIN_PIN 31 // PA7 MIN ES3 -#define Z_MAX_PIN 30 // PD9 MAX ES3 +#define X_MIN_PIN 14 // PD4 MIN ES1 +#define X_MAX_PIN 32 // PD10 MAX ES1 +#define Y_MIN_PIN 29 // PD6 MIN ES2 +#define Y_MAX_PIN 15 // PD5 MAX ES2 +#define Z_MIN_PIN 31 // PA7 MIN ES3 +#define Z_MAX_PIN 30 // PD9 MAX ES3 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 66 // D66 PB15 (Header J20 15) + #define FIL_RUNOUT_PIN 66 // D66 PB15 (Header J20 15) #endif #ifndef FIL_RUNOUT2_PIN - #define FIL_RUNOUT2_PIN 67 // D67 PB16 (Header J20 16) + #define FIL_RUNOUT2_PIN 67 // D67 PB16 (Header J20 16) #endif - // // Steppers // -#define X_STEP_PIN 40 // PC8 STEP1 * -#define X_DIR_PIN 59 // PA4 DIR1 * -#define X_ENABLE_PIN 41 // PC9 EN1 +#define X_STEP_PIN 40 // PC8 STEP1 * +#define X_DIR_PIN 59 // PA4 DIR1 * +#define X_ENABLE_PIN 41 // PC9 EN1 -#define Y_STEP_PIN 49 // PC14 STEP2 * -#define Y_DIR_PIN 47 // PC16 DIR2 * -#define Y_ENABLE_PIN 48 // PC15 EN2 * +#define Y_STEP_PIN 49 // PC14 STEP2 * +#define Y_DIR_PIN 47 // PC16 DIR2 * +#define Y_ENABLE_PIN 48 // PC15 EN2 * -#define Z_STEP_PIN 36 // PC4 STEP Z * -#define Z_DIR_PIN 107 // PB10 DIR Z * -#define Z_ENABLE_PIN 96 // PC10 EN Z -AddOns * +#define Z_STEP_PIN 36 // PC4 STEP Z * +#define Z_DIR_PIN 107 // PB10 DIR Z * +#define Z_ENABLE_PIN 96 // PC10 EN Z -AddOns * -#define E0_STEP_PIN 78 // PB23 STEP3 * -#define E0_DIR_PIN 22 // PB26 DIR3 * -#define E0_ENABLE_PIN 97 // PB24 EN3 -Addons * +#define E0_STEP_PIN 78 // PB23 STEP3 * +#define E0_DIR_PIN 22 // PB26 DIR3 * +#define E0_ENABLE_PIN 97 // PB24 EN3 -Addons * -#define E1_STEP_PIN 26 // PD1 STEP4 * -#define E1_DIR_PIN 27 // PD2 DIR4 * -#define E1_ENABLE_PIN 28 // PD3 EN4 * +#define E1_STEP_PIN 26 // PD1 STEP4 * +#define E1_DIR_PIN 27 // PD2 DIR4 * +#define E1_ENABLE_PIN 28 // PD3 EN4 * // Microstepping mode pins * -#define X_MS1_PIN 39 // PC7 MOD0E1 - As listed in schematic -#define X_MS2_PIN 38 // PC6 MOD1E1 -#define X_MS3_PIN 37 // PC5 MOD2E1 +#define X_MS1_PIN 39 // PC7 MOD0E1 - As listed in schematic +#define X_MS2_PIN 38 // PC6 MOD1E1 +#define X_MS3_PIN 37 // PC5 MOD2E1 -#define Y_MS1_PIN 50 // PC13 MODE0E2 -#define Y_MS2_PIN 51 // PC12 MODE1E2 -#define Y_MS3_PIN 92 // PC11 MODE2E2 - AddOns +#define Y_MS1_PIN 50 // PC13 MODE0E2 +#define Y_MS2_PIN 51 // PC12 MODE1E2 +#define Y_MS3_PIN 92 // PC11 MODE2E2 - AddOns -#define Z_MS1_PIN 44 // PC19 MOD0E Z -#define Z_MS2_PIN 45 // PC18 MOD1E Z -#define Z_MS3_PIN 46 // PC17 MOD2E Z +#define Z_MS1_PIN 44 // PC19 MOD0E Z +#define Z_MS2_PIN 45 // PC18 MOD1E Z +#define Z_MS3_PIN 46 // PC17 MOD2E Z -#define E0_MS1_PIN 105 // PB22 MOD0E3 - AddOns -#define E0_MS2_PIN 106 // PC27 MOD1E3 - AddOns -#define E0_MS3_PIN 104 // PC20 MOD2E3 - AddOns +#define E0_MS1_PIN 105 // PB22 MOD0E3 - AddOns +#define E0_MS2_PIN 106 // PC27 MOD1E3 - AddOns +#define E0_MS3_PIN 104 // PC20 MOD2E3 - AddOns -#define E1_MS1_PIN 25 // PD0 MOD0E4 -#define E1_MS2_PIN 18 // PA11 MOD1E4 -#define E1_MS3_PIN 19 // PA10 MOD2E4 +#define E1_MS1_PIN 25 // PD0 MOD0E4 +#define E1_MS2_PIN 18 // PA11 MOD1E4 +#define E1_MS3_PIN 19 // PA10 MOD2E4 // Motor current PWM pins * -#define MOTOR_CURRENT_PWM_X_PIN 58 // PA6 X-REF TIOB2 -#define MOTOR_CURRENT_PWM_Y_PIN 12 // PD8 Y-REF TIOB8 -#define MOTOR_CURRENT_PWM_Z_PIN 10 // PC29 Z-REF TIOB7 -#define MOTOR_CURRENT_PWM_E0_PIN 3 // PC28 E1-REF TIOA7 -#define MOTOR_CURRENT_PWM_E1_PIN 11 // PD7 E2-REF TIOA8 +#define MOTOR_CURRENT_PWM_X_PIN 58 // PA6 X-REF TIOB2 +#define MOTOR_CURRENT_PWM_Y_PIN 12 // PD8 Y-REF TIOB8 +#define MOTOR_CURRENT_PWM_Z_PIN 10 // PC29 Z-REF TIOB7 +#define MOTOR_CURRENT_PWM_E0_PIN 3 // PC28 E1-REF TIOA7 +#define MOTOR_CURRENT_PWM_E1_PIN 11 // PD7 E2-REF TIOA8 -#define MOTOR_CURRENT_PWM_RANGE 2750 // (3.3 Volts * 100000 Ohms) / (100000 Ohms + 20000 Ohms) = 2.75 Volts (max vref) +#define MOTOR_CURRENT_PWM_RANGE 2750 // (3.3 Volts * 100000 Ohms) / (100000 Ohms + 20000 Ohms) = 2.75 Volts (max vref) #define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } //, 1000, 1000} // X Y Z E0 E1, 1000 = 1000mAh // // Temperature Sensors // -#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 * -#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 * -#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 * -#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 * +#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 * +#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 * +#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 * +#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 * // // Heaters / Fans // -#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3 -#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4 -#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 -#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM +#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3 +#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4 +#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 +#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM #ifndef FAN_PIN - #define FAN_PIN 4 // D4 PC26 FET_PWM1 + #define FAN_PIN 4 // D4 PC26 FET_PWM1 #endif -#define FAN1_PIN 5 // D5 PC25 FET_PWM2 +#define FAN1_PIN 5 // D5 PC25 FET_PWM2 // // Misc. Functions // // Internal MicroSD card reader on the PCB -#define INT_SCK_PIN 42 // D42 PA19/MCCK -#define INT_MISO_PIN 43 // D43 PA20/MCCDA -#define INT_MOSI_PIN 73 // D73 PA21/MCDA0 -#define INT_SDSS 55 // D55 PA24/MCDA3 +#define INT_SCK_PIN 42 // D42 PA19/MCCK +#define INT_MISO_PIN 43 // D43 PA20/MCCDA +#define INT_MOSI_PIN 73 // D73 PA21/MCDA0 +#define INT_SDSS 55 // D55 PA24/MCDA3 // External SD card reader on SC2 -#define SCK_PIN 76 // D76 PA27 -#define MISO_PIN 74 // D74 PA25 -#define MOSI_PIN 75 // D75 PA26 -#define SDSS 87 // D87 PA29 +#define SCK_PIN 76 // D76 PA27 +#define MISO_PIN 74 // D74 PA25 +#define MOSI_PIN 75 // D75 PA26 +#define SDSS 87 // D87 PA29 // 2MB SPI Flash -#define SPI_FLASH_SS 52 // D52 PB21 +#define SPI_FLASH_SS 52 // D52 PB21 // // LCD / Controller // #if HAS_SPI_LCD - #define BEEPER_PIN 23 // D24 PA15_CTS1 - #define LCD_PINS_RS 17 // D17 PA12_RXD1 - #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 - #define LCD_PINS_D4 69 // D69 PA0_CANTX0 - #define LCD_PINS_D5 54 // D54 PA16_SCK1 - #define LCD_PINS_D6 68 // D68 PA1_CANRX0 - #define LCD_PINS_D7 34 // D34 PC2_PWML0 + #define BEEPER_PIN 23 // D24 PA15_CTS1 + #define LCD_PINS_RS 17 // D17 PA12_RXD1 + #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 + #define LCD_PINS_D4 69 // D69 PA0_CANTX0 + #define LCD_PINS_D5 54 // D54 PA16_SCK1 + #define LCD_PINS_D6 68 // D68 PA1_CANRX0 + #define LCD_PINS_D7 34 // D34 PC2_PWML0 - #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 + #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 #if ENABLED(NEWPANEL) // Buttons on AUX-2 - #define BTN_EN1 60 // D60 PA3_TIOB1 - #define BTN_EN2 13 // D13 PB27_TIOB0 - #define BTN_ENC 16 // D16 PA13_TXD1 + #define BTN_EN1 60 // D60 PA3_TIOB1 + #define BTN_EN2 13 // D13 PB27_TIOB0 + #define BTN_ENC 16 // D16 PA13_TXD1 #endif // NEWPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h index acd515d8c1..d2114ea433 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM2.h +++ b/Marlin/src/pins/sam/pins_ARCHIM2.h @@ -52,8 +52,8 @@ // // Servos // -#define SERVO0_PIN 20 // D20 PB12 (Header J20 20) -#define SERVO1_PIN 21 // D21 PB13 (Header J20 19) +#define SERVO0_PIN 20 // D20 PB12 (Header J20 20) +#define SERVO1_PIN 21 // D21 PB13 (Header J20 19) // // Limit Switches @@ -65,83 +65,83 @@ // Otherwise use a physical endstop based configuration. // TMC2130 Diag Pins - #define X_DIAG_PIN 59 // PA4 - #define Y_DIAG_PIN 48 // PC15 - #define Z_DIAG_PIN 36 // PC4 - #define E0_DIAG_PIN 78 // PB23 - #define E1_DIAG_PIN 25 // PD0 + #define X_DIAG_PIN 59 // PA4 + #define Y_DIAG_PIN 48 // PC15 + #define Z_DIAG_PIN 36 // PC4 + #define E0_DIAG_PIN 78 // PB23 + #define E1_DIAG_PIN 25 // PD0 #if X_HOME_DIR < 0 - #define X_MIN_PIN X_DIAG_PIN - #define X_MAX_PIN 32 + #define X_MIN_PIN X_DIAG_PIN + #define X_MAX_PIN 32 #else - #define X_MIN_PIN 14 - #define X_MAX_PIN X_DIAG_PIN + #define X_MIN_PIN 14 + #define X_MAX_PIN X_DIAG_PIN #endif #if Y_HOME_DIR < 0 - #define Y_MIN_PIN Y_DIAG_PIN - #define Y_MAX_PIN 15 + #define Y_MIN_PIN Y_DIAG_PIN + #define Y_MAX_PIN 15 #else - #define Y_MIN_PIN 29 - #define Y_MAX_PIN Y_DIAG_PIN + #define Y_MIN_PIN 29 + #define Y_MAX_PIN Y_DIAG_PIN #endif #else - #define X_MIN_PIN 14 // PD4 MIN ES1 - #define X_MAX_PIN 32 // PD10 MAX ES1 - #define Y_MIN_PIN 29 // PD6 MIN ES2 - #define Y_MAX_PIN 15 // PD5 MAX ES2 + #define X_MIN_PIN 14 // PD4 MIN ES1 + #define X_MAX_PIN 32 // PD10 MAX ES1 + #define Y_MIN_PIN 29 // PD6 MIN ES2 + #define Y_MAX_PIN 15 // PD5 MAX ES2 #endif -#define Z_MIN_PIN 31 // PA7 MIN ES3 -#define Z_MAX_PIN 30 // PD9 MAX ES3 +#define Z_MIN_PIN 31 // PA7 MIN ES3 +#define Z_MAX_PIN 30 // PD9 MAX ES3 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 32 + #define Z_MIN_PROBE_PIN 32 #endif // // Steppers // -#define X_STEP_PIN 38 // PC6 X-STEP * -#define X_DIR_PIN 37 // PC5 X-DIR * -#define X_ENABLE_PIN 41 // PC9 EN1 +#define X_STEP_PIN 38 // PC6 X-STEP * +#define X_DIR_PIN 37 // PC5 X-DIR * +#define X_ENABLE_PIN 41 // PC9 EN1 #ifndef X_CS_PIN - #define X_CS_PIN 39 // PC7 X_nCS + #define X_CS_PIN 39 // PC7 X_nCS #endif -#define Y_STEP_PIN 51 // PC12 Y-STEP * -#define Y_DIR_PIN 92 // PC11 Y-DIR -AddOns * -#define Y_ENABLE_PIN 49 // PC14 Y-EN * +#define Y_STEP_PIN 51 // PC12 Y-STEP * +#define Y_DIR_PIN 92 // PC11 Y-DIR -AddOns * +#define Y_ENABLE_PIN 49 // PC14 Y-EN * #ifndef Y_CS_PIN - #define Y_CS_PIN 50 // PC13 Y_nCS + #define Y_CS_PIN 50 // PC13 Y_nCS #endif -#define Z_STEP_PIN 46 // PC17 Z-STEP * -#define Z_DIR_PIN 47 // PC16 Z-DIR * -#define Z_ENABLE_PIN 44 // PC19 Z-END * +#define Z_STEP_PIN 46 // PC17 Z-STEP * +#define Z_DIR_PIN 47 // PC16 Z-DIR * +#define Z_ENABLE_PIN 44 // PC19 Z-END * #ifndef Z_CS_PIN - #define Z_CS_PIN 45 // PC18 Z_nCS + #define Z_CS_PIN 45 // PC18 Z_nCS #endif -#define E0_STEP_PIN 107 // PB10 E1-STEP -AddOns * -#define E0_DIR_PIN 96 // PC10 E1-DIR -AddOns * -#define E0_ENABLE_PIN 105 // PB22 E1-EN -AddOns * +#define E0_STEP_PIN 107 // PB10 E1-STEP -AddOns * +#define E0_DIR_PIN 96 // PC10 E1-DIR -AddOns * +#define E0_ENABLE_PIN 105 // PB22 E1-EN -AddOns * #ifndef E0_CS_PIN - #define E0_CS_PIN 104 // PC20 E1_nCS -AddOns * + #define E0_CS_PIN 104 // PC20 E1_nCS -AddOns * #endif -#define E1_STEP_PIN 22 // PB26 E2_STEP * -#define E1_DIR_PIN 97 // PB24 E2_DIR -AddOns * -#define E1_ENABLE_PIN 18 // PA11 E2-EN +#define E1_STEP_PIN 22 // PB26 E2_STEP * +#define E1_DIR_PIN 97 // PB24 E2_DIR -AddOns * +#define E1_ENABLE_PIN 18 // PA11 E2-EN #ifndef E1_CS_PIN - #define E1_CS_PIN 19 // PA10 E2_nCS + #define E1_CS_PIN 19 // PA10 E2_nCS #endif // @@ -150,106 +150,106 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI 28 // PD3 + #define TMC_SW_MOSI 28 // PD3 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO 26 // PD1 + #define TMC_SW_MISO 26 // PD1 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK 27 // PD2 + #define TMC_SW_SCK 27 // PD2 #endif #endif // // Temperature Sensors // -#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 * -#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 * -#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 * -#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 * +#define TEMP_0_PIN 10 // D10 PB19 THERM AN1 * +#define TEMP_1_PIN 9 // D9 PB18 THERM AN2 * +#define TEMP_2_PIN 8 // D8 PB17 THERM AN4 * +#define TEMP_BED_PIN 11 // D11 PB20 THERM AN3 * // // Heaters / Fans // -#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3 -#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4 -#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 -#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM +#define HEATER_0_PIN 6 // D6 PC24 FET_PWM3 +#define HEATER_1_PIN 7 // D7 PC23 FET_PWM4 +#define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 +#define HEATER_BED_PIN 9 // D9 PC21 BED_PWM #ifndef FAN_PIN - #define FAN_PIN 4 // D4 PC26 FET_PWM1 + #define FAN_PIN 4 // D4 PC26 FET_PWM1 #endif -#define FAN1_PIN 5 // D5 PC25 FET_PWM2 +#define FAN1_PIN 5 // D5 PC25 FET_PWM2 // // Misc. Functions // // Internal MicroSD card reader on the PCB -#define INT_SCK_PIN 42 // D42 PA19/MCCK -#define INT_MISO_PIN 43 // D43 PA20/MCCDA -#define INT_MOSI_PIN 73 // D73 PA21/MCDA0 -#define INT_SDSS 55 // D55 PA24/MCDA3 +#define INT_SCK_PIN 42 // D42 PA19/MCCK +#define INT_MISO_PIN 43 // D43 PA20/MCCDA +#define INT_MOSI_PIN 73 // D73 PA21/MCDA0 +#define INT_SDSS 55 // D55 PA24/MCDA3 // External SD card reader on SC2 -#define SCK_PIN 76 // D76 PA27 -#define MISO_PIN 74 // D74 PA25 -#define MOSI_PIN 75 // D75 PA26 -#define SDSS 87 // D87 PA29 +#define SCK_PIN 76 // D76 PA27 +#define MISO_PIN 74 // D74 PA25 +#define MOSI_PIN 75 // D75 PA26 +#define SDSS 87 // D87 PA29 // Unused Digital GPIO J20 Pins -#define GPIO_PB1_J20_5 94 // D94 PB1 (Header J20 5) -#define GPIO_PB0_J20_6 95 // D95 PB0 (Header J20 6) -#define GPIO_PB3_J20_7 103 // D103 PB3 (Header J20 7) -#define GPIO_PB2_J20_8 93 // D93 PB2 (Header J20 8) -#define GPIO_PB6_J20_9 99 // D99 PB6 (Header J20 9) -#define GPIO_PB5_J20_10 101 // D101 PB5 (Header J20 10) -#define GPIO_PB8_J20_11 100 // D100 PB8 (Header J20 11) -#define GPIO_PB4_J20_12 102 // D102 PB4 (Header J20 12) -#define GPIO_PB9_J20_13 108 // D108 PB9 (Header J20 13) -#define GPIO_PB7_J20_14 98 // D98 PB7 (Header J20 14) -#define GPIO_PB15_J20_15 66 // D66 PB15 (Header J20 15) -#define GPIO_PB16_J20_16 67 // D67 PB16 (Header J20 16) -#define GPIO_PB14_J20_17 53 // D53 PB14 (Header J20 17) -#define GPIO_PA18_J20_21 71 // D71 PA17 (Header J20 21) -#define GPIO_PA17_J20_22 70 // D70 PA17 (Header J20 22) +#define GPIO_PB1_J20_5 94 // D94 PB1 (Header J20 5) +#define GPIO_PB0_J20_6 95 // D95 PB0 (Header J20 6) +#define GPIO_PB3_J20_7 103 // D103 PB3 (Header J20 7) +#define GPIO_PB2_J20_8 93 // D93 PB2 (Header J20 8) +#define GPIO_PB6_J20_9 99 // D99 PB6 (Header J20 9) +#define GPIO_PB5_J20_10 101 // D101 PB5 (Header J20 10) +#define GPIO_PB8_J20_11 100 // D100 PB8 (Header J20 11) +#define GPIO_PB4_J20_12 102 // D102 PB4 (Header J20 12) +#define GPIO_PB9_J20_13 108 // D108 PB9 (Header J20 13) +#define GPIO_PB7_J20_14 98 // D98 PB7 (Header J20 14) +#define GPIO_PB15_J20_15 66 // D66 PB15 (Header J20 15) +#define GPIO_PB16_J20_16 67 // D67 PB16 (Header J20 16) +#define GPIO_PB14_J20_17 53 // D53 PB14 (Header J20 17) +#define GPIO_PA18_J20_21 71 // D71 PA17 (Header J20 21) +#define GPIO_PA17_J20_22 70 // D70 PA17 (Header J20 22) // Case Light -#define CASE_LIGHT_PIN GPIO_PB1_J20_5 +#define CASE_LIGHT_PIN GPIO_PB1_J20_5 // 2MB SPI Flash -#define SPI_FLASH_SS 52 // D52 PB21 +#define SPI_FLASH_SS 52 // D52 PB21 // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN GPIO_PB15_J20_15 + #define FIL_RUNOUT_PIN GPIO_PB15_J20_15 #endif #ifndef FIL_RUNOUT2_PIN - #define FIL_RUNOUT2_PIN GPIO_PB16_J20_16 + #define FIL_RUNOUT2_PIN GPIO_PB16_J20_16 #endif // // LCD / Controller // #if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE) - #define BEEPER_PIN 23 // D24 PA15_CTS1 - #define LCD_PINS_RS 17 // D17 PA12_RXD1 - #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 - #define LCD_PINS_D4 69 // D69 PA0_CANTX0 - #define LCD_PINS_D5 54 // D54 PA16_SCK1 - #define LCD_PINS_D6 68 // D68 PA1_CANRX0 - #define LCD_PINS_D7 34 // D34 PC2_PWML0 + #define BEEPER_PIN 23 // D24 PA15_CTS1 + #define LCD_PINS_RS 17 // D17 PA12_RXD1 + #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 + #define LCD_PINS_D4 69 // D69 PA0_CANTX0 + #define LCD_PINS_D5 54 // D54 PA16_SCK1 + #define LCD_PINS_D6 68 // D68 PA1_CANRX0 + #define LCD_PINS_D7 34 // D34 PC2_PWML0 - #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 + #define SD_DETECT_PIN 2 // D2 PB25_TIOA0 #if ENABLED(ULTIPANEL) || TOUCH_UI_ULTIPANEL || ENABLED(TOUCH_UI_FTDI_EVE) // Buttons on AUX-2 - #define BTN_EN1 60 // D60 PA3_TIOB1 - #define BTN_EN2 13 // D13 PB27_TIOB0 - #define BTN_ENC 16 // D16 PA13_TXD1 // the click + #define BTN_EN1 60 // D60 PA3_TIOB1 + #define BTN_EN2 13 // D13 PB27_TIOB0 + #define BTN_ENC 16 // D16 PA13_TXD1 // the click #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h index 69fb2a3dfc..f23d008bec 100644 --- a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h +++ b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h @@ -33,91 +33,91 @@ // // Servos // -#define SERVO0_PIN 6 +#define SERVO0_PIN 6 // // Limit Switches // -#define X_STOP_PIN 34 -#define Y_STOP_PIN 39 -#define Z_STOP_PIN 62 +#define X_STOP_PIN 34 +#define Y_STOP_PIN 39 +#define Z_STOP_PIN 62 #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 49 + #define Z_MIN_PROBE_PIN 49 #endif // // Steppers // -#define X_STEP_PIN 14 -#define X_DIR_PIN 25 -#define X_ENABLE_PIN 26 +#define X_STEP_PIN 14 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 26 -#define Y_STEP_PIN 11 -#define Y_DIR_PIN 12 -#define Y_ENABLE_PIN 15 +#define Y_STEP_PIN 11 +#define Y_DIR_PIN 12 +#define Y_ENABLE_PIN 15 -#define Z_STEP_PIN 24 -#define Z_DIR_PIN 27 -#define Z_ENABLE_PIN 28 +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 27 +#define Z_ENABLE_PIN 28 -#define E0_STEP_PIN 64 -#define E0_DIR_PIN 65 -#define E0_ENABLE_PIN 63 +#define E0_STEP_PIN 64 +#define E0_DIR_PIN 65 +#define E0_ENABLE_PIN 63 -#define E1_STEP_PIN 8 -#define E1_DIR_PIN 7 -#define E1_ENABLE_PIN 29 +#define E1_STEP_PIN 8 +#define E1_DIR_PIN 7 +#define E1_ENABLE_PIN 29 // // Temperature Sensors // Analog Inputs // -#define TEMP_0_PIN 1 -#define TEMP_1_PIN 2 -#define TEMP_BED_PIN 4 +#define TEMP_0_PIN 1 +#define TEMP_1_PIN 2 +#define TEMP_BED_PIN 4 #ifndef TEMP_CHAMBER_PIN - #define TEMP_CHAMBER_PIN 5 + #define TEMP_CHAMBER_PIN 5 #endif // // Heaters // -#define HEATER_0_PIN 3 -#define HEATER_1_PIN 4 -#define HEATER_BED_PIN 32 -#define HEATER_CHAMBER_PIN 33 +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 4 +#define HEATER_BED_PIN 32 +#define HEATER_CHAMBER_PIN 33 // // Fans // -//#define FAN0_PIN 8 -#define ORIG_E0_AUTO_FAN_PIN 30 -#define ORIG_E1_AUTO_FAN_PIN 30 -#define ORIG_E2_AUTO_FAN_PIN 30 -#define ORIG_E3_AUTO_FAN_PIN 30 -#define ORIG_CHAMBER_AUTO_FAN_PIN 10 +//#define FAN0_PIN 8 +#define ORIG_E0_AUTO_FAN_PIN 30 +#define ORIG_E1_AUTO_FAN_PIN 30 +#define ORIG_E2_AUTO_FAN_PIN 30 +#define ORIG_E3_AUTO_FAN_PIN 30 +#define ORIG_CHAMBER_AUTO_FAN_PIN 10 // // SD card // -#define SCK_PIN 76 -#define MISO_PIN 74 -#define MOSI_PIN 75 -#define SDSS 53 -#define SD_DETECT_PIN 40 +#define SCK_PIN 76 +#define MISO_PIN 74 +#define MOSI_PIN 75 +#define SDSS 53 +#define SD_DETECT_PIN 40 // Common I/O -//#define PWM_1_PIN 6 // probe -//#define PWM_2_PIN 13 -//#define SPARE_IO 17 -#define BEEPER_PIN 13 -#define STAT_LED_BLUE_PIN -1 -#define STAT_LED_RED_PIN 31 +//#define PWM_1_PIN 6 // probe +//#define PWM_2_PIN 13 +//#define SPARE_IO 17 +#define BEEPER_PIN 13 +#define STAT_LED_BLUE_PIN -1 +#define STAT_LED_RED_PIN 31 // G425 CALIBRATION_GCODE default pin #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN 66 + #define CALIBRATION_PIN 66 #endif diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index 4f352ff152..8f1fb75012 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -34,138 +34,138 @@ // // Servos // -#define SERVO0_PIN 5 -#define SERVO1_PIN 6 -#define SERVO2_PIN 13 -#define SERVO3_PIN -1 +#define SERVO0_PIN 5 +#define SERVO1_PIN 6 +#define SERVO2_PIN 13 +#define SERVO3_PIN -1 // // Limit Switches // -#define X_MIN_PIN 38 -#define X_MAX_PIN 36 -#define Y_MIN_PIN 34 -#define Y_MAX_PIN 32 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN 28 +#define X_MIN_PIN 38 +#define X_MAX_PIN 36 +#define Y_MIN_PIN 34 +#define Y_MAX_PIN 32 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN 28 // // Steppers // -#define X_STEP_PIN 2 -#define X_DIR_PIN 3 -#define X_ENABLE_PIN 22 +#define X_STEP_PIN 2 +#define X_DIR_PIN 3 +#define X_ENABLE_PIN 22 -#define Y_STEP_PIN 17 -#define Y_DIR_PIN 16 -#define Y_ENABLE_PIN 26 +#define Y_STEP_PIN 17 +#define Y_DIR_PIN 16 +#define Y_ENABLE_PIN 26 -#define Z_STEP_PIN 61 // Z1 STP -#define Z_DIR_PIN 60 // Z1 DIR -#define Z_ENABLE_PIN 15 // Z1 ENA +#define Z_STEP_PIN 61 // Z1 STP +#define Z_DIR_PIN 60 // Z1 DIR +#define Z_ENABLE_PIN 15 // Z1 ENA -#define E0_STEP_PIN 64 // Z2 STP -#define E0_DIR_PIN 63 // Z2 DIR -#define E0_ENABLE_PIN 62 // Z2 ENA +#define E0_STEP_PIN 64 // Z2 STP +#define E0_DIR_PIN 63 // Z2 DIR +#define E0_ENABLE_PIN 62 // Z2 ENA -#define E1_STEP_PIN 51 // E1 STP -#define E1_DIR_PIN 53 // E1 DIR -#define E1_ENABLE_PIN 65 // E1 ENA +#define E1_STEP_PIN 51 // E1 STP +#define E1_DIR_PIN 53 // E1 DIR +#define E1_ENABLE_PIN 65 // E1 ENA -#define E2_STEP_PIN 24 // E2 STP -#define E2_DIR_PIN 23 // E2 DIR -#define E2_ENABLE_PIN 49 // E2 ENA +#define E2_STEP_PIN 24 // E2 STP +#define E2_DIR_PIN 23 // E2 DIR +#define E2_ENABLE_PIN 49 // E2 ENA // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) -#define TEMP_1_PIN 2 // Analog Input (HOTEND1 thermistor) -#define TEMP_2_PIN 5 // Analog Input (unused) -#define TEMP_BED_PIN 1 // Analog Input (BED thermistor) +#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) +#define TEMP_1_PIN 2 // Analog Input (HOTEND1 thermistor) +#define TEMP_2_PIN 5 // Analog Input (unused) +#define TEMP_BED_PIN 1 // Analog Input (BED thermistor) // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN -1 + #define MAX6675_SS_PIN -1 #else - #define MAX6675_SS_PIN -1 + #define MAX6675_SS_PIN -1 #endif // // Heaters / Fans // -#define HEATER_0_PIN 7 // HOTEND0 MOSFET -#define HEATER_1_PIN 8 // HOTEND1 MOSFET -#define HEATER_BED_PIN 39 // BED MOSFET +#define HEATER_0_PIN 7 // HOTEND0 MOSFET +#define HEATER_1_PIN 8 // HOTEND1 MOSFET +#define HEATER_BED_PIN 39 // BED MOSFET #ifndef FAN_PIN - #define FAN_PIN 11 // FAN1 header on board - PRINT FAN + #define FAN_PIN 11 // FAN1 header on board - PRINT FAN #endif -#define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN -#define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN +#define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN +#define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN // // Misc. Functions // -#define SDSS 4 -#define PS_ON_PIN 40 +#define SDSS 4 +#define PS_ON_PIN 40 // // LCD / Controller // #if HAS_SPI_LCD - #define LCD_PINS_RS 42 - #define LCD_PINS_ENABLE 43 - #define LCD_PINS_D4 44 - #define LCD_PINS_D5 45 - #define LCD_PINS_D6 46 - #define LCD_PINS_D7 47 + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 + #define LCD_PINS_D5 45 + #define LCD_PINS_D6 46 + #define LCD_PINS_D7 47 #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 41 + #define BEEPER_PIN 41 - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 - #define SDSS 4 - #define SD_DETECT_PIN 14 + #define SDSS 4 + #define SD_DETECT_PIN 14 #elif ENABLED(RADDS_DISPLAY) - #define BEEPER_PIN 41 + #define BEEPER_PIN 41 - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 - #define BTN_BACK 71 + #define BTN_BACK 71 #undef SDSS - #define SDSS 4 - #define SD_DETECT_PIN 14 + #define SDSS 4 + #define SD_DETECT_PIN 14 #elif HAS_SSD1306_OLED_I2C - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 - #define BEEPER_PIN 41 - #define LCD_SDSS 4 - #define SD_DETECT_PIN 14 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + #define BEEPER_PIN 41 + #define LCD_SDSS 4 + #define SD_DETECT_PIN 14 #elif ENABLED(SPARK_FULL_GRAPHICS) - #define LCD_PINS_D4 29 - #define LCD_PINS_ENABLE 27 - #define LCD_PINS_RS 25 + #define LCD_PINS_D4 29 + #define LCD_PINS_ENABLE 27 + #define LCD_PINS_RS 25 - #define BTN_EN1 35 - #define BTN_EN2 33 - #define BTN_ENC 37 + #define BTN_EN1 35 + #define BTN_EN2 33 + #define BTN_ENC 37 - #define BEEPER_PIN -1 + #define BEEPER_PIN -1 #endif // SPARK_FULL_GRAPHICS #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 240204ced9..34706d5e90 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -34,141 +34,141 @@ // // Servos // -#define SERVO0_PIN 5 -#define SERVO1_PIN 6 -#define SERVO2_PIN 8 // 4-pin header FAN0 -#define SERVO3_PIN -1 +#define SERVO0_PIN 5 +#define SERVO1_PIN 6 +#define SERVO2_PIN 8 // 4-pin header FAN0 +#define SERVO3_PIN -1 // // Limit Switches // -#define X_MIN_PIN 38 -#define X_MAX_PIN -1 -#define Y_MIN_PIN 34 -#define Y_MAX_PIN -1 -#define Z_MIN_PIN 30 -#define Z_MAX_PIN -1 +#define X_MIN_PIN 38 +#define X_MAX_PIN -1 +#define Y_MIN_PIN 34 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN 30 +#define Z_MAX_PIN -1 // // Steppers // -#define X_STEP_PIN 17 -#define X_DIR_PIN 16 -#define X_ENABLE_PIN 22 +#define X_STEP_PIN 17 +#define X_DIR_PIN 16 +#define X_ENABLE_PIN 22 -#define Y_STEP_PIN 2 -#define Y_DIR_PIN 3 -#define Y_ENABLE_PIN 26 +#define Y_STEP_PIN 2 +#define Y_DIR_PIN 3 +#define Y_ENABLE_PIN 26 -#define Z_STEP_PIN 64 -#define Z_DIR_PIN 63 -#define Z_ENABLE_PIN 15 +#define Z_STEP_PIN 64 +#define Z_DIR_PIN 63 +#define Z_ENABLE_PIN 15 -#define E0_STEP_PIN 61 -#define E0_DIR_PIN 60 -#define E0_ENABLE_PIN 62 +#define E0_STEP_PIN 61 +#define E0_DIR_PIN 60 +#define E0_ENABLE_PIN 62 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) -#define TEMP_1_PIN 2 // Analog Input (unused) -#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950) -#define TEMP_BED_PIN 1 // Analog Input (BED thermistor) +#define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) +#define TEMP_1_PIN 2 // Analog Input (unused) +#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950) +#define TEMP_BED_PIN 1 // Analog Input (BED thermistor) // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 53 + #define MAX6675_SS_PIN 53 #else - #define MAX6675_SS_PIN 53 + #define MAX6675_SS_PIN 53 #endif // // Heaters / Fans // -#define HEATER_0_PIN 13 // HOTEND0 MOSFET -#define HEATER_BED_PIN 7 // BED MOSFET +#define HEATER_0_PIN 13 // HOTEND0 MOSFET +#define HEATER_BED_PIN 7 // BED MOSFET #ifndef FAN_PIN - #define FAN_PIN 11 // FAN1 header on board - PRINT FAN + #define FAN_PIN 11 // FAN1 header on board - PRINT FAN #endif -#define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN -#define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN -//#define FAN3_PIN 8 // FAN0 4-pin header on board +#define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN +#define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN +//#define FAN3_PIN 8 // FAN0 4-pin header on board // // Misc. Functions // -#define SDSS 4 -#define PS_ON_PIN 40 +#define SDSS 4 +#define PS_ON_PIN 40 // // LCD / Controller // #if HAS_SPI_LCD - #define LCD_PINS_RS 42 - #define LCD_PINS_ENABLE 43 - #define LCD_PINS_D4 44 - #define LCD_PINS_D5 45 - #define LCD_PINS_D6 46 - #define LCD_PINS_D7 47 + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 + #define LCD_PINS_D5 45 + #define LCD_PINS_D6 46 + #define LCD_PINS_D7 47 #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 41 + #define BEEPER_PIN 41 - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 - #define SDSS 4 - #define SD_DETECT_PIN 14 + #define SDSS 4 + #define SD_DETECT_PIN 14 #elif ENABLED(RADDS_DISPLAY) - #define BEEPER_PIN 41 + #define BEEPER_PIN 41 - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 - #define BTN_BACK 71 + #define BTN_BACK 71 #undef SDSS - #define SDSS 4 - #define SD_DETECT_PIN 14 + #define SDSS 4 + #define SD_DETECT_PIN 14 #elif HAS_SSD1306_OLED_I2C - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 - #define BEEPER_PIN 41 - #define LCD_SDSS 4 - #define SD_DETECT_PIN 14 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + #define BEEPER_PIN 41 + #define LCD_SDSS 4 + #define SD_DETECT_PIN 14 #elif ENABLED(SPARK_FULL_GRAPHICS) - #define LCD_PINS_D4 29 - #define LCD_PINS_ENABLE 27 - #define LCD_PINS_RS 25 + #define LCD_PINS_D4 29 + #define LCD_PINS_ENABLE 27 + #define LCD_PINS_RS 25 - #define BTN_EN1 35 - #define BTN_EN2 33 - #define BTN_ENC 37 + #define BTN_EN1 35 + #define BTN_EN2 33 + #define BTN_ENC 37 - #define BEEPER_PIN -1 + #define BEEPER_PIN -1 #elif ENABLED(MINIPANEL) - #define BTN_EN1 52 - #define BTN_EN2 50 - #define BTN_ENC 48 - #define LCD_SDSS 4 - #define SD_DETECT_PIN 14 - #define BEEPER_PIN 41 - #define DOGLCD_A0 46 - #define DOGLCD_CS 45 + #define BTN_EN1 52 + #define BTN_EN2 50 + #define BTN_ENC 48 + #define LCD_SDSS 4 + #define SD_DETECT_PIN 14 + #define BEEPER_PIN 41 + #define DOGLCD_A0 46 + #define DOGLCD_CS 45 #endif // SPARK_FULL_GRAPHICS #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h index c05c6169d6..b3a9e456a2 100644 --- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h +++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h @@ -36,38 +36,38 @@ // // Servos // -//#define SERVO0_PIN -1 -//#define SERVO1_PIN -1 +//#define SERVO0_PIN -1 +//#define SERVO1_PIN -1 // // Limit Switches // -#define X_MIN_PIN 22 // PB26 -#define Y_MAX_PIN 18 // PA11 -#define Z_MIN_PIN 19 // PA10 +#define X_MIN_PIN 22 // PB26 +#define Y_MAX_PIN 18 // PA11 +#define Z_MIN_PIN 19 // PA10 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 22 + #define Z_MIN_PROBE_PIN 22 #endif #ifndef FIL_RUNOUT_PIN - //#define FIL_RUNOUT_PIN 57 // PA22 + //#define FIL_RUNOUT_PIN 57 // PA22 #endif #ifndef FIL_RUNOUT2_PIN - //#define FIL_RUNOUT2_PIN 21 // PB13 + //#define FIL_RUNOUT2_PIN 21 // PB13 #endif // // LED defines // -//#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) -//#define NEOPIXEL_PIN 20 // LED driving pin on motherboard -//#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip -//#define SDA0 20 // PB12 NeoPixel pin I2C data -//#define SCL0 21 // PB13 I2C clock +//#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) +//#define NEOPIXEL_PIN 20 // LED driving pin on motherboard +//#define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip +//#define SDA0 20 // PB12 NeoPixel pin I2C data +//#define SCL0 21 // PB13 I2C clock // D0_12 #REF! (INDICATOR_LED) // B28 JTAG-CLK @@ -79,82 +79,82 @@ //A15 UART_CTS //PB2 Unassigned //PB4 to PB9 Unassigned -//#define UART_RX_PIN 0 // PA8 "RX0" -//#define UART_TX_PIN 1 // PA9 "TX0" -//#define UART_RTS_PIN 23 // PA14 -//#define UART_CTS_PIN 24 // PA15 +//#define UART_RX_PIN 0 // PA8 "RX0" +//#define UART_TX_PIN 1 // PA9 "TX0" +//#define UART_RTS_PIN 23 // PA14 +//#define UART_CTS_PIN 24 // PA15 // // Steppers // -#define Z_STEP_PIN 73 // PA21 MOTOR 1 -#define Z_DIR_PIN 75 // PA26 -#define Z_ENABLE_PIN 74 // PA25 +#define Z_STEP_PIN 73 // PA21 MOTOR 1 +#define Z_DIR_PIN 75 // PA26 +#define Z_ENABLE_PIN 74 // PA25 -#define X_STEP_PIN 66 // PB15 MOTOR 2 -#define X_DIR_PIN 54 // PA16 -#define X_ENABLE_PIN 67 // PB16 +#define X_STEP_PIN 66 // PB15 MOTOR 2 +#define X_DIR_PIN 54 // PA16 +#define X_ENABLE_PIN 67 // PB16 -#define Y_STEP_PIN 34 // PA29 MOTOR 3 -#define Y_DIR_PIN 35 // PB1 -#define Y_ENABLE_PIN 36 // PB0 +#define Y_STEP_PIN 34 // PA29 MOTOR 3 +#define Y_DIR_PIN 35 // PB1 +#define Y_ENABLE_PIN 36 // PB0 -#define E0_STEP_PIN 53 // PB14 MOTOR 4 -#define E0_DIR_PIN 78 // PB23 -#define E0_ENABLE_PIN 37 // PB22 +#define E0_STEP_PIN 53 // PB14 MOTOR 4 +#define E0_DIR_PIN 78 // PB23 +#define E0_ENABLE_PIN 37 // PB22 // Microstepping mode pins -#define Z_MS1_PIN 52 // PB21 MODE0 MOTOR 1 -#define Z_MS2_PIN 52 // PB21 MODE1 -#define Z_MS3_PIN 65 // PB20 MODE2 +#define Z_MS1_PIN 52 // PB21 MODE0 MOTOR 1 +#define Z_MS2_PIN 52 // PB21 MODE1 +#define Z_MS3_PIN 65 // PB20 MODE2 -#define X_MS1_PIN 43 // PA20 MODE0 MOTOR 2 -#define X_MS2_PIN 43 // PA20 MODE1 -#define X_MS3_PIN 42 // PA19 MODE2 +#define X_MS1_PIN 43 // PA20 MODE0 MOTOR 2 +#define X_MS2_PIN 43 // PA20 MODE1 +#define X_MS3_PIN 42 // PA19 MODE2 -#define Y_MS1_PIN 77 // PA28 MODE0 MOTOR 3 -#define Y_MS2_PIN 77 // PA28 MODE1 -#define Y_MS3_PIN 76 // PA27 MODE2 +#define Y_MS1_PIN 77 // PA28 MODE0 MOTOR 3 +#define Y_MS2_PIN 77 // PA28 MODE1 +#define Y_MS3_PIN 76 // PA27 MODE2 -#define E0_MS1_PIN 38 // PB11 MODE0 MOTOR 4 -#define E0_MS2_PIN 38 // PB11 MODE1 -#define E0_MS3_PIN 39 // PB10 MODE2 +#define E0_MS1_PIN 38 // PB11 MODE0 MOTOR 4 +#define E0_MS2_PIN 38 // PB11 MODE1 +#define E0_MS3_PIN 39 // PB10 MODE2 // Motor current PWM pins -#define MOTOR_CURRENT_PWM_X_PIN 62 // PB17 MOTOR 1 -#define MOTOR_CURRENT_PWM_Z_PIN 63 // PB18 MOTOR 2 -#define MOTOR_CURRENT_PWM_Y_PIN 64 // PB19 MOTOR 3 -#define MOTOR_CURRENT_PWM_E_PIN 61 // PA2 MOTOR 4 +#define MOTOR_CURRENT_PWM_X_PIN 62 // PB17 MOTOR 1 +#define MOTOR_CURRENT_PWM_Z_PIN 63 // PB18 MOTOR 2 +#define MOTOR_CURRENT_PWM_Y_PIN 64 // PB19 MOTOR 3 +#define MOTOR_CURRENT_PWM_E_PIN 61 // PA2 MOTOR 4 #define DEFAULT_PWM_MOTOR_CURRENT { 300, 400, 1000} // XY Z E0, 1000 = 1000mAh // // Temperature Sensors // -#define TEMP_0_PIN 2 // digital 56 PA23 -#define TEMP_BED_PIN 5 // digital 59 PA4 +#define TEMP_0_PIN 2 // digital 56 PA23 +#define TEMP_BED_PIN 5 // digital 59 PA4 // // Heaters / Fans // -#define HEATER_0_PIN 40 // PA5 -#define HEATER_BED_PIN 41 // PB24 +#define HEATER_0_PIN 40 // PA5 +#define HEATER_BED_PIN 41 // PB24 #ifndef FAN_PIN - #define FAN_PIN 13 // PB27 Fan1A + #define FAN_PIN 13 // PB27 Fan1A #endif -#define FAN1_PIN 58 // PA6 Fan1B +#define FAN1_PIN 58 // PA6 Fan1B -#define FET_SAFETY_PIN 31 // PA7 must be pulsed low every 50 mS or FETs are turned off -#define FET_SAFETY_DELAY 50 // 50 mS delay between pulses -#define FET_SAFETY_INVERTED true // true - negative going pulse of 2 uS +#define FET_SAFETY_PIN 31 // PA7 must be pulsed low every 50 mS or FETs are turned off +#define FET_SAFETY_DELAY 50 // 50 mS delay between pulses +#define FET_SAFETY_INVERTED true // true - negative going pulse of 2 uS ///////////////////////////////////////////////////////// -#define MISO_PIN 68 // set to unused pins for now -#define MOSI_PIN 69 // set to unused pins for now -#define SCK_PIN 70 // set to unused pins for now -#define SDSS 71 // set to unused pins for now +#define MISO_PIN 68 // set to unused pins for now +#define MOSI_PIN 69 // set to unused pins for now +#define SCK_PIN 70 // set to unused pins for now +#define SDSS 71 // set to unused pins for now /** * G2 uses 8 pins that are not available in the DUE environment: diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index 41daba4e8e..3bc52e9387 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -35,187 +35,187 @@ // Servos // #if !HAS_CUTTER - #define SERVO0_PIN 5 + #define SERVO0_PIN 5 #endif -#define SERVO1_PIN 6 -#define SERVO2_PIN 39 -#define SERVO3_PIN 40 +#define SERVO1_PIN 6 +#define SERVO2_PIN 39 +#define SERVO3_PIN 40 // // Limit Switches // -#define X_MIN_PIN 28 -#define X_MAX_PIN 34 -#define Y_MIN_PIN 30 -#define Y_MAX_PIN 36 -#define Z_MIN_PIN 32 -#define Z_MAX_PIN 38 +#define X_MIN_PIN 28 +#define X_MAX_PIN 34 +#define Y_MIN_PIN 30 +#define Y_MAX_PIN 36 +#define Z_MIN_PIN 32 +#define Z_MAX_PIN 38 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 38 + #define Z_MIN_PROBE_PIN 38 #endif // // Steppers // -#define X_STEP_PIN 24 -#define X_DIR_PIN 23 -#define X_ENABLE_PIN 26 +#define X_STEP_PIN 24 +#define X_DIR_PIN 23 +#define X_ENABLE_PIN 26 #ifndef X_CS_PIN - #define X_CS_PIN 25 + #define X_CS_PIN 25 #endif -#define Y_STEP_PIN 17 -#define Y_DIR_PIN 16 -#define Y_ENABLE_PIN 22 +#define Y_STEP_PIN 17 +#define Y_DIR_PIN 16 +#define Y_ENABLE_PIN 22 #ifndef Y_CS_PIN - #define Y_CS_PIN 27 + #define Y_CS_PIN 27 #endif -#define Z_STEP_PIN 2 -#define Z_DIR_PIN 3 -#define Z_ENABLE_PIN 15 +#define Z_STEP_PIN 2 +#define Z_DIR_PIN 3 +#define Z_ENABLE_PIN 15 #ifndef Z_CS_PIN - #define Z_CS_PIN 29 + #define Z_CS_PIN 29 #endif -#define E0_STEP_PIN 61 -#define E0_DIR_PIN 60 -#define E0_ENABLE_PIN 62 +#define E0_STEP_PIN 61 +#define E0_DIR_PIN 60 +#define E0_ENABLE_PIN 62 #ifndef E0_CS_PIN - #define E0_CS_PIN 31 + #define E0_CS_PIN 31 #endif -#define E1_STEP_PIN 64 -#define E1_DIR_PIN 63 -#define E1_ENABLE_PIN 65 +#define E1_STEP_PIN 64 +#define E1_DIR_PIN 63 +#define E1_ENABLE_PIN 65 #ifndef E1_CS_PIN - #define E1_CS_PIN 33 + #define E1_CS_PIN 33 #endif -#define E2_STEP_PIN 51 -#define E2_DIR_PIN 53 -#define E2_ENABLE_PIN 49 +#define E2_STEP_PIN 51 +#define E2_DIR_PIN 53 +#define E2_ENABLE_PIN 49 #ifndef E2_CS_PIN - #define E2_CS_PIN 35 + #define E2_CS_PIN 35 #endif /** * RADDS Extension Board V2 / V3 * http://doku.radds.org/dokumentation/extension-board */ -//#define RADDS_EXTENSION 2 +//#define RADDS_EXTENSION 2 #if RADDS_EXTENSION >= 2 - #define E3_DIR_PIN 33 - #define E3_STEP_PIN 35 - #define E3_ENABLE_PIN 37 + #define E3_DIR_PIN 33 + #define E3_STEP_PIN 35 + #define E3_ENABLE_PIN 37 #ifndef E3_CS_PIN - #define E3_CS_PIN 6 + #define E3_CS_PIN 6 #endif #if RADDS_EXTENSION == 3 - #define E4_DIR_PIN 27 - #define E4_STEP_PIN 29 - #define E4_ENABLE_PIN 31 + #define E4_DIR_PIN 27 + #define E4_STEP_PIN 29 + #define E4_ENABLE_PIN 31 #ifndef E4_CS_PIN - #define E4_CS_PIN 39 + #define E4_CS_PIN 39 #endif - #define E5_DIR_PIN 66 - #define E5_STEP_PIN 67 - #define E5_ENABLE_PIN 68 + #define E5_DIR_PIN 66 + #define E5_STEP_PIN 67 + #define E5_ENABLE_PIN 68 #ifndef E5_CS_PIN - #define E5_CS_PIN 6 + #define E5_CS_PIN 6 #endif - #define RADDS_EXT_MSI_PIN 69 + #define RADDS_EXT_MSI_PIN 69 #define BOARD_INIT() OUT_WRITE(RADDS_EXT_VDD_PIN, HIGH) #else - #define E4_DIR_PIN 27 - #define E4_STEP_PIN 29 - #define E4_ENABLE_PIN 31 + #define E4_DIR_PIN 27 + #define E4_STEP_PIN 29 + #define E4_ENABLE_PIN 31 #ifndef E4_CS_PIN - #define E4_CS_PIN 39 + #define E4_CS_PIN 39 #endif // E3 and E4 share the same MSx pins - #define E3_MS1_PIN 67 - #define E4_MS1_PIN 67 - #define E3_MS2_PIN 68 - #define E4_MS2_PIN 68 - #define E3_MS3_PIN 69 - #define E4_MS3_PIN 69 + #define E3_MS1_PIN 67 + #define E4_MS1_PIN 67 + #define E3_MS2_PIN 68 + #define E4_MS2_PIN 68 + #define E3_MS3_PIN 69 + #define E4_MS3_PIN 69 - #define RADDS_EXT_VDD2_PIN 66 + #define RADDS_EXT_VDD2_PIN 66 #define BOARD_INIT() do{ OUT_WRITE(RADDS_EXT_VDD_PIN, HIGH); OUT_WRITE(RADDS_EXT_VDD2_PIN, HIGH); }while(0) #endif - #define RADDS_EXT_VDD_PIN 25 + #define RADDS_EXT_VDD_PIN 25 #endif // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_2_PIN 2 // Analog Input -#define TEMP_3_PIN 3 // Analog Input -#define TEMP_4_PIN 5 // dummy so will compile when PINS_DEBUGGING is enabled -#define TEMP_BED_PIN 4 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_2_PIN 2 // Analog Input +#define TEMP_3_PIN 3 // Analog Input +#define TEMP_4_PIN 5 // dummy so will compile when PINS_DEBUGGING is enabled +#define TEMP_BED_PIN 4 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 53 + #define MAX6675_SS_PIN 53 #else - #define MAX6675_SS_PIN 49 + #define MAX6675_SS_PIN 49 #endif // // Heaters / Fans // -#define HEATER_0_PIN 13 -#define HEATER_1_PIN 12 -#define HEATER_2_PIN 11 +#define HEATER_0_PIN 13 +#define HEATER_1_PIN 12 +#define HEATER_2_PIN 11 #if !HAS_CUTTER - #define HEATER_BED_PIN 7 // BED + #define HEATER_BED_PIN 7 // BED #endif #ifndef FAN_PIN - #define FAN_PIN 9 + #define FAN_PIN 9 #endif -#define FAN1_PIN 8 +#define FAN1_PIN 8 // // Misc. Functions // -#define SD_DETECT_PIN 14 -#define PS_ON_PIN 40 // SERVO3_PIN +#define SD_DETECT_PIN 14 +#define PS_ON_PIN 40 // SERVO3_PIN #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 39 // SERVO2_PIN + #define FIL_RUNOUT_PIN 39 // SERVO2_PIN #endif #define I2C_EEPROM -#define E2END 0x1FFF // 8KB +#define E2END 0x1FFF // 8KB // // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER #if !NUM_SERVOS - #define SPINDLE_LASER_PWM_PIN 5 // SERVO0_PIN + #define SPINDLE_LASER_PWM_PIN 5 // SERVO0_PIN #endif - #define SPINDLE_LASER_ENA_PIN 7 // HEATER_BED_PIN - Pullup/down! + #define SPINDLE_LASER_ENA_PIN 7 // HEATER_BED_PIN - Pullup/down! #endif // @@ -225,65 +225,65 @@ #if ENABLED(RADDS_DISPLAY) - #define LCD_PINS_RS 42 - #define LCD_PINS_ENABLE 43 - #define LCD_PINS_D4 44 - #define LCD_PINS_D5 45 - #define LCD_PINS_D6 46 - #define LCD_PINS_D7 47 + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 + #define LCD_PINS_D5 45 + #define LCD_PINS_D6 46 + #define LCD_PINS_D7 47 - #define BEEPER_PIN 41 + #define BEEPER_PIN 41 - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 - #define BTN_BACK 71 + #define BTN_BACK 71 - #define SDSS 10 - #define SD_DETECT_PIN 14 + #define SDSS 10 + #define SD_DETECT_PIN 14 #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) // The REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER requires // an adapter such as https://www.thingiverse.com/thing:1740725 - #define LCD_PINS_RS 42 - #define LCD_PINS_ENABLE 43 - #define LCD_PINS_D4 44 + #define LCD_PINS_RS 42 + #define LCD_PINS_ENABLE 43 + #define LCD_PINS_D4 44 - #define BEEPER_PIN 41 + #define BEEPER_PIN 41 - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 - #define SDSS 10 - #define SD_DETECT_PIN 14 + #define SDSS 10 + #define SD_DETECT_PIN 14 #elif HAS_SSD1306_OLED_I2C - #define BTN_EN1 50 - #define BTN_EN2 52 - #define BTN_ENC 48 - #define BEEPER_PIN 41 - #define LCD_SDSS 10 - #define SD_DETECT_PIN 14 + #define BTN_EN1 50 + #define BTN_EN2 52 + #define BTN_ENC 48 + #define BEEPER_PIN 41 + #define LCD_SDSS 10 + #define SD_DETECT_PIN 14 #elif ENABLED(SPARK_FULL_GRAPHICS) - #define LCD_PINS_D4 29 - #define LCD_PINS_ENABLE 27 - #define LCD_PINS_RS 25 + #define LCD_PINS_D4 29 + #define LCD_PINS_ENABLE 27 + #define LCD_PINS_RS 25 - #define BTN_EN1 35 - #define BTN_EN2 33 - #define BTN_ENC 37 + #define BTN_EN1 35 + #define BTN_EN2 33 + #define BTN_ENC 37 #endif // SPARK_FULL_GRAPHICS #endif // HAS_SPI_LCD #ifndef SDSS - #define SDSS 4 + #define SDSS 4 #endif diff --git a/Marlin/src/pins/sam/pins_RAMPS_DUO.h b/Marlin/src/pins/sam/pins_RAMPS_DUO.h index d25ef9e059..916dbf6430 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h +++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h @@ -56,20 +56,20 @@ // Temperature Sensors // #undef TEMP_0_PIN -#define TEMP_0_PIN 9 // Analog Input +#define TEMP_0_PIN 9 // Analog Input #undef TEMP_1_PIN -#define TEMP_1_PIN 11 // Analog Input +#define TEMP_1_PIN 11 // Analog Input #undef TEMP_BED_PIN -#define TEMP_BED_PIN 10 // Analog Input +#define TEMP_BED_PIN 10 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #undef MAX6675_SS_PIN #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 69 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 69 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 69 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 69 // Don't use 49 (SD_DETECT_PIN) #endif // @@ -79,13 +79,13 @@ #if BOTH(NEWPANEL, PANEL_ONE) #undef LCD_PINS_D4 - #define LCD_PINS_D4 68 + #define LCD_PINS_D4 68 #undef LCD_PINS_D5 - #define LCD_PINS_D5 69 + #define LCD_PINS_D5 69 #undef LCD_PINS_D7 - #define LCD_PINS_D7 67 + #define LCD_PINS_D7 67 #endif #if ENABLED(NEWPANEL) @@ -93,36 +93,36 @@ #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #undef BTN_EN1 - #define BTN_EN1 67 + #define BTN_EN1 67 #undef BTN_ENC - #define BTN_ENC 66 + #define BTN_ENC 66 #elif ENABLED(MINIPANEL) #undef DOGLCD_CS - #define DOGLCD_CS 69 + #define DOGLCD_CS 69 #undef LCD_BACKLIGHT_PIN - #define LCD_BACKLIGHT_PIN 68 // backlight LED on A14/D68 + #define LCD_BACKLIGHT_PIN 68 // backlight LED on A14/D68 #undef KILL_PIN - #define KILL_PIN 67 + #define KILL_PIN 67 #undef BTN_EN2 - #define BTN_EN2 66 + #define BTN_EN2 66 #else #if ENABLED(REPRAPWORLD_KEYPAD) #undef BTN_EN1 - #define BTN_EN1 67 // encoder + #define BTN_EN1 67 // encoder #undef BTN_ENC - #define BTN_ENC 66 // enter button + #define BTN_ENC 66 // enter button #elif ENABLED(PANEL_ONE) #undef BTN_EN2 - #define BTN_EN2 66 // AUX2 PIN 4 + #define BTN_EN2 66 // AUX2 PIN 4 #endif #endif diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index ee44dd7950..297aaa9cb8 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -43,98 +43,98 @@ // // Servos // -#define SERVO0_PIN 7 -#define SERVO1_PIN 6 -#define SERVO2_PIN 5 -#define SERVO3_PIN 3 +#define SERVO0_PIN 7 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 +#define SERVO3_PIN 3 // // Limit Switches // -#define X_MIN_PIN 22 -#define X_MAX_PIN 30 -#define Y_MIN_PIN 24 -#define Y_MAX_PIN 38 -#define Z_MIN_PIN 26 -#define Z_MAX_PIN 34 +#define X_MIN_PIN 22 +#define X_MAX_PIN 30 +#define Y_MIN_PIN 24 +#define Y_MAX_PIN 38 +#define Z_MIN_PIN 26 +#define Z_MAX_PIN 34 // // Steppers // -#define X_STEP_PIN 63 -#define X_DIR_PIN 62 -#define X_ENABLE_PIN 48 +#define X_STEP_PIN 63 +#define X_DIR_PIN 62 +#define X_ENABLE_PIN 48 #ifndef X_CS_PIN - #define X_CS_PIN 68 + #define X_CS_PIN 68 #endif -#define Y_STEP_PIN 65 -#define Y_DIR_PIN 64 -#define Y_ENABLE_PIN 46 +#define Y_STEP_PIN 65 +#define Y_DIR_PIN 64 +#define Y_ENABLE_PIN 46 #ifndef Y_CS_PIN - #define Y_CS_PIN 60 + #define Y_CS_PIN 60 #endif -#define Z_STEP_PIN 67 -#define Z_DIR_PIN 66 -#define Z_ENABLE_PIN 44 +#define Z_STEP_PIN 67 +#define Z_DIR_PIN 66 +#define Z_ENABLE_PIN 44 #ifndef Z_CS_PIN - #define Z_CS_PIN 58 + #define Z_CS_PIN 58 #endif -#define E0_STEP_PIN 36 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 42 +#define E0_STEP_PIN 36 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 42 #ifndef E0_CS_PIN - #define E0_CS_PIN 67 + #define E0_CS_PIN 67 #endif -#define E1_STEP_PIN 43 -#define E1_DIR_PIN 41 -#define E1_ENABLE_PIN 39 +#define E1_STEP_PIN 43 +#define E1_DIR_PIN 41 +#define E1_ENABLE_PIN 39 #ifndef E1_CS_PIN - #define E1_CS_PIN 61 + #define E1_CS_PIN 61 #endif -#define E2_STEP_PIN 32 -#define E2_DIR_PIN 47 -#define E2_ENABLE_PIN 45 +#define E2_STEP_PIN 32 +#define E2_DIR_PIN 47 +#define E2_ENABLE_PIN 45 #ifndef E2_CS_PIN - #define E2_CS_PIN 59 + #define E2_CS_PIN 59 #endif // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input -#define TEMP_1_PIN 2 // Analog Input -#define TEMP_2_PIN 3 // Analog Input -#define TEMP_BED_PIN 0 // Analog Input +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_1_PIN 2 // Analog Input +#define TEMP_2_PIN 3 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 53 + #define MAX6675_SS_PIN 53 #else - #define MAX6675_SS_PIN 49 + #define MAX6675_SS_PIN 49 #endif // // Heaters / Fans // -#define HEATER_0_PIN 9 -#define HEATER_1_PIN 10 -#define HEATER_2_PIN 11 -#define HEATER_BED_PIN 8 +#define HEATER_0_PIN 9 +#define HEATER_1_PIN 10 +#define HEATER_2_PIN 11 +#define HEATER_BED_PIN 8 #ifndef FAN_PIN - #define FAN_PIN 12 + #define FAN_PIN 12 #endif // // Misc. Functions // -#define SDSS 4 -#define LED_PIN 13 +#define SDSS 4 +#define LED_PIN 13 // // LCD / Controller @@ -142,65 +142,65 @@ #if HAS_SPI_LCD // ramps-fd lcd adaptor - #define BEEPER_PIN 37 - #define BTN_EN1 33 - #define BTN_EN2 31 - #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #define BEEPER_PIN 37 + #define BTN_EN1 33 + #define BTN_EN2 31 + #define BTN_ENC 35 + #define SD_DETECT_PIN 49 #if ENABLED(NEWPANEL) - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 #endif #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS LCD_PINS_ENABLE - #define DOGLCD_A0 LCD_PINS_RS - #define DOGLCD_SCK 76 - #define DOGLCD_MOSI 75 + #define DOGLCD_CS LCD_PINS_ENABLE + #define DOGLCD_A0 LCD_PINS_RS + #define DOGLCD_SCK 76 + #define DOGLCD_MOSI 75 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 25 + #define RGB_LED_R_PIN 25 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 27 + #define RGB_LED_G_PIN 27 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 29 + #define RGB_LED_B_PIN 29 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 25 + #define NEOPIXEL_PIN 25 #endif #elif ENABLED(NEWPANEL) - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 - #define LCD_PINS_D7 29 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 + #define LCD_PINS_D7 29 #if ENABLED(MINIPANEL) - #define DOGLCD_CS 25 - #define DOGLCD_A0 27 + #define DOGLCD_CS 25 + #define DOGLCD_A0 27 #endif #endif #if ANY(VIKI2, miniVIKI) - #define DOGLCD_A0 16 - #define KILL_PIN 51 - #define STAT_LED_BLUE_PIN 29 - #define STAT_LED_RED_PIN 23 - #define DOGLCD_CS 17 - #define DOGLCD_SCK 76 // SCK_PIN - Required for DUE Hardware SPI - #define DOGLCD_MOSI 75 // MOSI_PIN - #define DOGLCD_MISO 74 // MISO_PIN + #define DOGLCD_A0 16 + #define KILL_PIN 51 + #define STAT_LED_BLUE_PIN 29 + #define STAT_LED_RED_PIN 23 + #define DOGLCD_CS 17 + #define DOGLCD_SCK 76 // SCK_PIN - Required for DUE Hardware SPI + #define DOGLCD_MOSI 75 // MOSI_PIN + #define DOGLCD_MISO 74 // MISO_PIN #endif #endif // HAS_SPI_LCD @@ -229,7 +229,7 @@ // M3/M4/M5 - Spindle/Laser Control // #if HOTENDS < 3 && HAS_CUTTER && !PIN_EXISTS(SPINDLE_LASER_ENA) - #define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA - #define SPINDLE_LASER_PWM_PIN 12 // Hardware PWM - #define SPINDLE_DIR_PIN 47 // Use E2 DIR + #define SPINDLE_LASER_ENA_PIN 45 // Use E2 ENA + #define SPINDLE_LASER_PWM_PIN 12 // Hardware PWM + #define SPINDLE_DIR_PIN 47 // Use E2 DIR #endif diff --git a/Marlin/src/pins/sam/pins_RAMPS_SMART.h b/Marlin/src/pins/sam/pins_RAMPS_SMART.h index 455d40a999..0fd4a6b3ea 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_SMART.h +++ b/Marlin/src/pins/sam/pins_RAMPS_SMART.h @@ -73,26 +73,26 @@ #define I2C_EEPROM #define E2END 0xFFF -#define RESET_PIN 42 // Resets the board if the jumper is attached +#define RESET_PIN 42 // Resets the board if the jumper is attached // // Temperature Sensors // #undef TEMP_0_PIN -#define TEMP_0_PIN 9 // Analog Input +#define TEMP_0_PIN 9 // Analog Input #undef TEMP_1_PIN -#define TEMP_1_PIN 10 // Analog Input +#define TEMP_1_PIN 10 // Analog Input #undef TEMP_BED_PIN -#define TEMP_BED_PIN 11 // Analog Input +#define TEMP_BED_PIN 11 // Analog Input // SPI for Max6675 or Max31855 Thermocouple #undef MAX6675_SS_PIN #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 67 // Don't use 53 if using Display/SD card + #define MAX6675_SS_PIN 67 // Don't use 53 if using Display/SD card #else - #define MAX6675_SS_PIN 67 // Don't use 49 (SD_DETECT_PIN) + #define MAX6675_SS_PIN 67 // Don't use 49 (SD_DETECT_PIN) #endif // @@ -100,12 +100,12 @@ // // Support for AZSMZ 12864 LCD with SD Card 3D printer smart controller control panel #if ENABLED(AZSMZ_12864) - #define BEEPER_PIN 66 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 65 - #define DOGLCD_A0 59 - #define DOGLCD_CS 44 - #define BTN_EN1 58 - #define BTN_EN2 40 - #define BTN_ENC 67 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 66 - #define SD_DETECT_PIN 49 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 42 + #define BEEPER_PIN 66 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 65 + #define DOGLCD_A0 59 + #define DOGLCD_CS 44 + #define BTN_EN1 58 + #define BTN_EN2 40 + #define BTN_ENC 67 // Smart RAMPS 1.42 pinout diagram on RepRap WIKI erroneously says this should be pin 66 + #define SD_DETECT_PIN 49 // Pin 49 for display sd interface, 72 for easy adapter board + #define KILL_PIN 42 #endif diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index 6963a164bb..7b844b5be0 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -41,76 +41,76 @@ // // Servos // -#define SERVO0_PIN 5 -#define SERVO1_PIN 3 +#define SERVO0_PIN 5 +#define SERVO1_PIN 3 // // Limit Switches // -#define X_MIN_PIN 45 -#define X_MAX_PIN 39 -#define Y_MIN_PIN 46 -#define Y_MAX_PIN 41 -#define Z_MIN_PIN 47 -#define Z_MAX_PIN 43 +#define X_MIN_PIN 45 +#define X_MAX_PIN 39 +#define Y_MIN_PIN 46 +#define Y_MAX_PIN 41 +#define Z_MIN_PIN 47 +#define Z_MAX_PIN 43 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 43 + #define Z_MIN_PROBE_PIN 43 #endif // // Steppers // -#define X_STEP_PIN 37 // Support Extension Board -#define X_DIR_PIN 36 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 37 // Support Extension Board +#define X_DIR_PIN 36 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN -1 + #define X_CS_PIN -1 #endif -#define Y_STEP_PIN 32 // Support Extension Board -#define Y_DIR_PIN 35 -#define Y_ENABLE_PIN 34 +#define Y_STEP_PIN 32 // Support Extension Board +#define Y_DIR_PIN 35 +#define Y_ENABLE_PIN 34 #ifndef Y_CS_PIN - #define Y_CS_PIN -1 + #define Y_CS_PIN -1 #endif -#define Z_STEP_PIN 30 // Support Extension Board -#define Z_DIR_PIN 2 -#define Z_ENABLE_PIN 33 +#define Z_STEP_PIN 30 // Support Extension Board +#define Z_DIR_PIN 2 +#define Z_ENABLE_PIN 33 #ifndef Z_CS_PIN - #define Z_CS_PIN -1 + #define Z_CS_PIN -1 #endif -#define E0_STEP_PIN 29 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 31 +#define E0_STEP_PIN 29 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 31 #ifndef E0_CS_PIN - #define E0_CS_PIN -1 + #define E0_CS_PIN -1 #endif -#define E1_STEP_PIN 22 -#define E1_DIR_PIN 24 -#define E1_ENABLE_PIN 26 +#define E1_STEP_PIN 22 +#define E1_DIR_PIN 24 +#define E1_ENABLE_PIN 26 #ifndef E1_CS_PIN - #define E1_CS_PIN -1 + #define E1_CS_PIN -1 #endif -#define E2_STEP_PIN 25 -#define E2_DIR_PIN 23 -#define E2_ENABLE_PIN 27 +#define E2_STEP_PIN 25 +#define E2_DIR_PIN 23 +#define E2_ENABLE_PIN 27 #ifndef E2_CS_PIN - #define E2_CS_PIN -1 + #define E2_CS_PIN -1 #endif -#define E3_STEP_PIN 15 // Only For Extension Board -#define E3_DIR_PIN 14 -#define E3_ENABLE_PIN 61 +#define E3_STEP_PIN 15 // Only For Extension Board +#define E3_DIR_PIN 14 +#define E3_ENABLE_PIN 61 #ifndef E3_CS_PIN - #define E3_CS_PIN -1 + #define E3_CS_PIN -1 #endif // For Future: Microstepping pins - Mapping not from fastio.h (?) @@ -119,77 +119,77 @@ //#define E3_MS3_PIN ? #if HAS_CUSTOM_PROBE_PIN - #define Z_MIN_PROBE_PIN 49 + #define Z_MIN_PROBE_PIN 49 #endif #if HAS_FILAMENT_SENSOR #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN Y_MIN_PIN + #define FIL_RUNOUT_PIN Y_MIN_PIN #endif #endif // // Heaters / Fans // -#define HEATER_0_PIN 13 -#define HEATER_1_PIN 12 -#define HEATER_2_PIN 11 -#define HEATER_BED_PIN 7 // BED H1 +#define HEATER_0_PIN 13 +#define HEATER_1_PIN 12 +#define HEATER_2_PIN 11 +#define HEATER_BED_PIN 7 // BED H1 #ifndef FAN_PIN - #define FAN_PIN 9 + #define FAN_PIN 9 #endif -#define FAN1_PIN 8 -#define CONTROLLER_FAN_PIN -1 +#define FAN1_PIN 8 +#define CONTROLLER_FAN_PIN -1 // // Temperature Sensors // -#define TEMP_0_PIN 0 // ANALOG A0 -#define TEMP_1_PIN 1 // ANALOG A1 -#define TEMP_2_PIN 2 // ANALOG A2 -#define TEMP_3_PIN 3 // ANALOG A3 -#define TEMP_BED_PIN 4 // ANALOG A4 +#define TEMP_0_PIN 0 // ANALOG A0 +#define TEMP_1_PIN 1 // ANALOG A1 +#define TEMP_2_PIN 2 // ANALOG A2 +#define TEMP_3_PIN 3 // ANALOG A3 +#define TEMP_BED_PIN 4 // ANALOG A4 // The thermocouple uses Analog pins -#if ENABLED(VER_WITH_THERMOCOUPLE) // Defined in Configuration.h - #define TEMP_4_PIN 5 // A5 - #define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support) +#if ENABLED(VER_WITH_THERMOCOUPLE) // Defined in Configuration.h + #define TEMP_4_PIN 5 // A5 + #define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support) #endif // SPI for Max6675 or Max31855 Thermocouple /* #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 53 + #define MAX6675_SS_PIN 53 #else - #define MAX6675_SS_PIN 49 + #define MAX6675_SS_PIN 49 #endif */ // // Misc. Functions // -#define SDSS 4 // 4,10,52 if using HW SPI. -#define LED_PIN -1 // 13 - HEATER_0_PIN -#define PS_ON_PIN -1 // 65 +#define SDSS 4 // 4,10,52 if using HW SPI. +#define LED_PIN -1 // 13 - HEATER_0_PIN +#define PS_ON_PIN -1 // 65 // MKS TFT / Nextion Use internal USART-1 -#define TFT_LCD_MODULE_COM 1 -#define TFT_LCD_MODULE_BAUDRATE 115600 +#define TFT_LCD_MODULE_COM 1 +#define TFT_LCD_MODULE_BAUDRATE 115600 // ESP WiFi Use internal USART-2 -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115600 -#define ESP_WIFI_MODULE_RESET_PIN -1 -#define PIGGY_GPIO_PIN -1 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115600 +#define ESP_WIFI_MODULE_RESET_PIN -1 +#define PIGGY_GPIO_PIN -1 // // EEPROM // -#define E2END 0x7FFF // 32Kb (24lc256) -#define I2C_EEPROM // EEPROM on I2C-0 -//#define EEPROM_SD // EEPROM on SDCARD -//#define SPI_EEPROM // EEPROM on SPI-0 +#define E2END 0x7FFF // 32Kb (24lc256) +#define I2C_EEPROM // EEPROM on I2C-0 +//#define EEPROM_SD // EEPROM on SDCARD +//#define SPI_EEPROM // EEPROM on SPI-0 //#define SPI_CHAN_EEPROM1 ? //#define SPI_EEPROM1_CS ? // 2K EEPROM @@ -203,72 +203,72 @@ #if HAS_SPI_LCD #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define BEEPER_PIN 62 - #define LCD_PINS_D4 48 - #define LCD_PINS_D5 50 - #define LCD_PINS_D6 52 - #define LCD_PINS_D7 53 - #define SD_DETECT_PIN 51 + #define BEEPER_PIN 62 + #define LCD_PINS_D4 48 + #define LCD_PINS_D5 50 + #define LCD_PINS_D6 52 + #define LCD_PINS_D7 53 + #define SD_DETECT_PIN 51 #endif #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) - #define LCD_PINS_RS 63 - #define LCD_PINS_ENABLE 64 + #define LCD_PINS_RS 63 + #define LCD_PINS_ENABLE 64 #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define LCD_PINS_RS 52 - #define LCD_PINS_ENABLE 53 + #define LCD_PINS_RS 52 + #define LCD_PINS_ENABLE 53 #elif HAS_SSD1306_OLED_I2C - #define BEEPER_PIN 62 - #define LCD_SDSS 10 - #define SD_DETECT_PIN 51 + #define BEEPER_PIN 62 + #define LCD_SDSS 10 + #define SD_DETECT_PIN 51 #elif ENABLED(FYSETC_MINI_12864) - #define BEEPER_PIN 62 - #define DOGLCD_CS 64 - #define DOGLCD_A0 63 + #define BEEPER_PIN 62 + #define DOGLCD_CS 64 + #define DOGLCD_A0 63 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 50 // D5 + #define RGB_LED_R_PIN 50 // D5 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 52 // D6 + #define RGB_LED_G_PIN 52 // D6 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 53 // D7 + #define RGB_LED_B_PIN 53 // D7 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 50 // D5 + #define NEOPIXEL_PIN 50 // D5 #endif #elif ENABLED(SPARK_FULL_GRAPHICS) //http://doku.radds.org/dokumentation/other-electronics/sparklcd/ #error "Oops! SPARK_FULL_GRAPHICS not supported with RURAMPS4D." - //#define LCD_PINS_D4 29 //? - //#define LCD_PINS_ENABLE 27 //? - //#define LCD_PINS_RS 25 //? - //#define BTN_EN1 35 //? - //#define BTN_EN2 33 //? - //#define BTN_ENC 37 //? + //#define LCD_PINS_D4 29 //? + //#define LCD_PINS_ENABLE 27 //? + //#define LCD_PINS_RS 25 //? + //#define BTN_EN1 35 //? + //#define BTN_EN2 33 //? + //#define BTN_ENC 37 //? #endif // SPARK_FULL_GRAPHICS #if ENABLED(NEWPANEL) - #define BTN_EN1 44 - #define BTN_EN2 42 - #define BTN_ENC 40 + #define BTN_EN1 44 + #define BTN_EN2 42 + #define BTN_ENC 40 #endif #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index d0c24e68a3..3ba6fd17cf 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -41,141 +41,141 @@ // // Servos // -#define SERVO0_PIN 5 -#define SERVO1_PIN 3 +#define SERVO0_PIN 5 +#define SERVO1_PIN 3 // // Limit Switches // -#define X_MIN_PIN 45 -#define X_MAX_PIN 39 -#define Y_MIN_PIN 46 -#define Y_MAX_PIN 41 -#define Z_MIN_PIN 47 -#define Z_MAX_PIN 43 +#define X_MIN_PIN 45 +#define X_MAX_PIN 39 +#define Y_MIN_PIN 46 +#define Y_MAX_PIN 41 +#define Z_MIN_PIN 47 +#define Z_MAX_PIN 43 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 49 + #define Z_MIN_PROBE_PIN 49 #endif // // Steppers // -#define X_STEP_PIN 37 // Support Extension Board -#define X_DIR_PIN 36 -#define X_ENABLE_PIN 31 +#define X_STEP_PIN 37 // Support Extension Board +#define X_DIR_PIN 36 +#define X_ENABLE_PIN 31 #ifndef X_CS_PIN - #define X_CS_PIN 38 + #define X_CS_PIN 38 #endif -#define Y_STEP_PIN 32 // Support Extension Board -#define Y_DIR_PIN 35 -#define Y_ENABLE_PIN 31 +#define Y_STEP_PIN 32 // Support Extension Board +#define Y_DIR_PIN 35 +#define Y_ENABLE_PIN 31 #ifndef Y_CS_PIN - #define Y_CS_PIN 34 + #define Y_CS_PIN 34 #endif -#define Z_STEP_PIN 30 // Support Extension Board -#define Z_DIR_PIN 2 -#define Z_ENABLE_PIN 31 +#define Z_STEP_PIN 30 // Support Extension Board +#define Z_DIR_PIN 2 +#define Z_ENABLE_PIN 31 #ifndef Z_CS_PIN - #define Z_CS_PIN 10 + #define Z_CS_PIN 10 #endif -#define E0_STEP_PIN 29 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 33 +#define E0_STEP_PIN 29 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 33 #ifndef E0_CS_PIN - #define E0_CS_PIN 14 + #define E0_CS_PIN 14 #endif -#define E1_STEP_PIN 22 -#define E1_DIR_PIN 24 -#define E1_ENABLE_PIN 26 +#define E1_STEP_PIN 22 +#define E1_DIR_PIN 24 +#define E1_ENABLE_PIN 26 #ifndef E1_CS_PIN - #define E1_CS_PIN 15 + #define E1_CS_PIN 15 #endif -#define E2_STEP_PIN 25 -#define E2_DIR_PIN 23 -#define E2_ENABLE_PIN 27 +#define E2_STEP_PIN 25 +#define E2_DIR_PIN 23 +#define E2_ENABLE_PIN 27 #ifndef E2_CS_PIN - #define E2_CS_PIN 61 + #define E2_CS_PIN 61 #endif #if HAS_CUSTOM_PROBE_PIN - #define Z_MIN_PROBE_PIN 49 + #define Z_MIN_PROBE_PIN 49 #endif #if HAS_FILAMENT_SENSOR #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN Y_MIN_PIN + #define FIL_RUNOUT_PIN Y_MIN_PIN #endif #endif // // Heaters / Fans // -#define HEATER_0_PIN 13 -#define HEATER_1_PIN 12 -#define HEATER_2_PIN 11 -#define HEATER_BED_PIN 7 // BED H1 +#define HEATER_0_PIN 13 +#define HEATER_1_PIN 12 +#define HEATER_2_PIN 11 +#define HEATER_BED_PIN 7 // BED H1 -#define FAN_PIN 9 -#define FAN1_PIN 8 -#define CONTROLLER_FAN_PIN -1 +#define FAN_PIN 9 +#define FAN1_PIN 8 +#define CONTROLLER_FAN_PIN -1 // // Temperature Sensors // -#define TEMP_0_PIN 0 // ANALOG A0 -#define TEMP_1_PIN 1 // ANALOG A1 -#define TEMP_2_PIN 2 // ANALOG A2 -#define TEMP_3_PIN 3 // ANALOG A3 -#define TEMP_BED_PIN 4 // ANALOG A4 +#define TEMP_0_PIN 0 // ANALOG A0 +#define TEMP_1_PIN 1 // ANALOG A1 +#define TEMP_2_PIN 2 // ANALOG A2 +#define TEMP_3_PIN 3 // ANALOG A3 +#define TEMP_BED_PIN 4 // ANALOG A4 // The thermocouple uses Analog pins -#if ENABLED(VER_WITH_THERMOCOUPLE) // Defined in Configuration.h - #define TEMP_4_PIN 5 // A5 - #define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support) +#if ENABLED(VER_WITH_THERMOCOUPLE) // Defined in Configuration.h + #define TEMP_4_PIN 5 // A5 + #define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support) #endif // SPI for Max6675 or Max31855 Thermocouple /* #if DISABLED(SDSUPPORT) - #define MAX6675_SS_PIN 53 + #define MAX6675_SS_PIN 53 #else - #define MAX6675_SS_PIN 49 + #define MAX6675_SS_PIN 49 #endif */ // // Misc. Functions // -#define SDSS 4 // 4,10,52 if using HW SPI. -#define LED_PIN -1 // 13 - HEATER_0_PIN -#define PS_ON_PIN -1 // 65 +#define SDSS 4 // 4,10,52 if using HW SPI. +#define LED_PIN -1 // 13 - HEATER_0_PIN +#define PS_ON_PIN -1 // 65 // MKS TFT / Nextion Use internal USART-1 -#define TFT_LCD_MODULE_COM 1 -#define TFT_LCD_MODULE_BAUDRATE 115200 +#define TFT_LCD_MODULE_COM 1 +#define TFT_LCD_MODULE_BAUDRATE 115200 // ESP WiFi Use internal USART-2 -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 -#define ESP_WIFI_MODULE_RESET_PIN -1 -#define PIGGY_GPIO_PIN -1 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 +#define PIGGY_GPIO_PIN -1 // // EEPROM // -#define E2END 0x7FFF // 32Kb (24lc256) -#define I2C_EEPROM // EEPROM on I2C-0 -//#define EEPROM_SD // EEPROM on SDCARD -//#define SPI_EEPROM // EEPROM on SPI-0 +#define E2END 0x7FFF // 32Kb (24lc256) +#define I2C_EEPROM // EEPROM on I2C-0 +//#define EEPROM_SD // EEPROM on SDCARD +//#define SPI_EEPROM // EEPROM on SPI-0 //#define SPI_CHAN_EEPROM1 ? //#define SPI_EEPROM1_CS ? // 2K EEPROM @@ -189,70 +189,70 @@ #if HAS_SPI_LCD #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define BEEPER_PIN 62 - #define LCD_PINS_D4 48 - #define LCD_PINS_D5 50 - #define LCD_PINS_D6 52 - #define LCD_PINS_D7 53 - #define SD_DETECT_PIN 51 + #define BEEPER_PIN 62 + #define LCD_PINS_D4 48 + #define LCD_PINS_D5 50 + #define LCD_PINS_D6 52 + #define LCD_PINS_D7 53 + #define SD_DETECT_PIN 51 #endif #if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER) - #define LCD_PINS_RS 63 - #define LCD_PINS_ENABLE 64 + #define LCD_PINS_RS 63 + #define LCD_PINS_ENABLE 64 #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) - #define LCD_PINS_RS 52 - #define LCD_PINS_ENABLE 53 + #define LCD_PINS_RS 52 + #define LCD_PINS_ENABLE 53 #elif HAS_SSD1306_OLED_I2C - #define BEEPER_PIN 62 - #define LCD_SDSS 10 - #define SD_DETECT_PIN 51 + #define BEEPER_PIN 62 + #define LCD_SDSS 10 + #define SD_DETECT_PIN 51 #elif ENABLED(FYSETC_MINI_12864) - #define BEEPER_PIN 62 - #define DOGLCD_CS 64 - #define DOGLCD_A0 63 + #define BEEPER_PIN 62 + #define DOGLCD_CS 64 + #define DOGLCD_A0 63 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 - #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN 50 // D5 + #define RGB_LED_R_PIN 50 // D5 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN 52 // D6 + #define RGB_LED_G_PIN 52 // D6 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN 53 // D7 + #define RGB_LED_B_PIN 53 // D7 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN 50 // D5 + #define NEOPIXEL_PIN 50 // D5 #endif #elif ENABLED(MKS_MINI_12864) - #define ORIG_BEEPER_PIN 62 + #define ORIG_BEEPER_PIN 62 - #define DOGLCD_A0 52 - #define DOGLCD_CS 50 + #define DOGLCD_A0 52 + #define DOGLCD_CS 50 - #define SD_DETECT_PIN 51 + #define SD_DETECT_PIN 51 #endif #if ENABLED(NEWPANEL) - #define BTN_EN1 44 - #define BTN_EN2 42 - #define BTN_ENC 40 + #define BTN_EN1 44 + #define BTN_EN2 42 + #define BTN_ENC 40 #endif #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h index db0826e7c9..ae01d5da4c 100644 --- a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h +++ b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h @@ -35,140 +35,140 @@ // Servos // #if NUM_SERVOS > 0 - #define SERVO0_PIN 11 + #define SERVO0_PIN 11 #if NUM_SERVOS > 1 - #define SERVO1_PIN 12 + #define SERVO1_PIN 12 #endif #endif // // Limit Switches // -#define X_MIN_PIN 31 -#define X_MAX_PIN 30 -#define Y_MIN_PIN 12 -#define Y_MAX_PIN 11 -#define Z_MIN_PIN 29 -#define Z_MAX_PIN 28 +#define X_MIN_PIN 31 +#define X_MAX_PIN 30 +#define Y_MIN_PIN 12 +#define Y_MAX_PIN 11 +#define Z_MIN_PIN 29 +#define Z_MAX_PIN 28 // // Steppers // -#define X_STEP_PIN 35 -#define X_DIR_PIN 34 -#define X_ENABLE_PIN 37 +#define X_STEP_PIN 35 +#define X_DIR_PIN 34 +#define X_ENABLE_PIN 37 #ifndef X_CS_PIN - #define X_CS_PIN 18 + #define X_CS_PIN 18 #endif -#define Y_STEP_PIN 22 -#define Y_DIR_PIN 23 -#define Y_ENABLE_PIN 33 +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#define Y_ENABLE_PIN 33 #ifndef Y_CS_PIN - #define Y_CS_PIN 19 + #define Y_CS_PIN 19 #endif -#define Z_STEP_PIN 25 -#define Z_DIR_PIN 26 -#define Z_ENABLE_PIN 24 +#define Z_STEP_PIN 25 +#define Z_DIR_PIN 26 +#define Z_ENABLE_PIN 24 #ifndef Z_CS_PIN - #define Z_CS_PIN 16 + #define Z_CS_PIN 16 #endif -#define E0_STEP_PIN 47 -#define E0_DIR_PIN 46 -#define E0_ENABLE_PIN 48 +#define E0_STEP_PIN 47 +#define E0_DIR_PIN 46 +#define E0_ENABLE_PIN 48 #ifndef E0_CS_PIN - #define E0_CS_PIN 17 + #define E0_CS_PIN 17 #endif -#define E1_STEP_PIN 44 -#define E1_DIR_PIN 36 -#define E1_ENABLE_PIN 45 +#define E1_STEP_PIN 44 +#define E1_DIR_PIN 36 +#define E1_ENABLE_PIN 45 #ifndef E1_CS_PIN - #define E1_CS_PIN -1 + #define E1_CS_PIN -1 #endif -#define E2_STEP_PIN 42 -#define E2_DIR_PIN 41 -#define E2_ENABLE_PIN 43 +#define E2_STEP_PIN 42 +#define E2_DIR_PIN 41 +#define E2_ENABLE_PIN 43 #ifndef E2_CS_PIN - #define E2_CS_PIN -1 + #define E2_CS_PIN -1 #endif -#define E3_STEP_PIN 39 -#define E3_DIR_PIN 38 -#define E3_ENABLE_PIN 40 +#define E3_STEP_PIN 39 +#define E3_DIR_PIN 38 +#define E3_ENABLE_PIN 40 #ifndef E3_CS_PIN - #define E3_CS_PIN -1 + #define E3_CS_PIN -1 #endif // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 2 // Analog Input -#define TEMP_2_PIN 3 // Analog Input -#define TEMP_3_PIN 4 // Analog Input -#define TEMP_BED_PIN 1 // Analog Input +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 2 // Analog Input +#define TEMP_2_PIN 3 // Analog Input +#define TEMP_3_PIN 4 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 3 -#define HEATER_1_PIN 8 -#define HEATER_2_PIN 7 -#define HEATER_3_PIN 9 -#define HEATER_BED_PIN 2 +#define HEATER_0_PIN 3 +#define HEATER_1_PIN 8 +#define HEATER_2_PIN 7 +#define HEATER_3_PIN 9 +#define HEATER_BED_PIN 2 #ifndef FAN_PIN - #define FAN_PIN 6 + #define FAN_PIN 6 #endif -#define FAN2_PIN 5 +#define FAN2_PIN 5 // // Misc. Functions // -#define SDSS 59 -#define SD_DETECT_PIN 60 -#define LED_PIN 13 -#define PS_ON_PIN 32 +#define SDSS 59 +#define SD_DETECT_PIN 60 +#define LED_PIN 13 +#define PS_ON_PIN 32 // // SPI Buses // -#define DAC0_SYNC 53 // PB14 -#define SPI_CHAN_DAC 1 +#define DAC0_SYNC 53 // PB14 +#define SPI_CHAN_DAC 1 -#define SPI_CHAN_EEPROM1 -1 -#define SPI_EEPROM1_CS -1 -#define SPI_EEPROM2_CS -1 -#define SPI_FLASH_CS -1 +#define SPI_CHAN_EEPROM1 -1 +#define SPI_EEPROM1_CS -1 +#define SPI_EEPROM2_CS -1 +#define SPI_FLASH_CS -1 // SPI for Max6675 or Max31855 Thermocouple -#define MAX6675_SS_PIN 65 -#define MAX31855_SS0 65 -#define MAX31855_SS1 52 -#define MAX31855_SS2 50 -#define MAX31855_SS3 51 +#define MAX6675_SS_PIN 65 +#define MAX31855_SS0 65 +#define MAX31855_SS1 52 +#define MAX31855_SS2 50 +#define MAX31855_SS3 51 -#define ENC424_SS 61 +#define ENC424_SS 61 // // LCD / Controller // -#define BEEPER_PIN 27 +#define BEEPER_PIN 27 #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS A8 // CS chip select / SS chip slave select - #define LCD_PINS_ENABLE MOSI // SID (MOSI) - #define LCD_PINS_D4 SCK // SCK (CLK) clock + #define LCD_PINS_RS A8 // CS chip select / SS chip slave select + #define LCD_PINS_ENABLE MOSI // SID (MOSI) + #define LCD_PINS_D4 SCK // SCK (CLK) clock - #define BTN_EN1 20 - #define BTN_EN2 21 - #define BTN_ENC 64 + #define BTN_EN1 20 + #define BTN_EN2 21 + #define BTN_ENC 64 #endif // REPRAPWORLD_GRAPHICAL_LCD diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index 20da59e395..b7d5172e0d 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -36,110 +36,110 @@ // // Servos // -#define SERVO0_PIN 11 -#define SERVO1_PIN 6 -#define SERVO2_PIN 5 -#define SERVO3_PIN 4 +#define SERVO0_PIN 11 +#define SERVO1_PIN 6 +#define SERVO2_PIN 5 +#define SERVO3_PIN 4 // // EEPROM // -#define E2END 0x7FFF // 32Kb (24lc256) -#define I2C_EEPROM // EEPROM on I2C-0 +#define E2END 0x7FFF // 32Kb (24lc256) +#define I2C_EEPROM // EEPROM on I2C-0 // // Limit Switches // -#define X_MIN_PIN 3 -#define X_MAX_PIN 2 -#define Y_MIN_PIN 14 -#define Y_MAX_PIN 15 -#define Z_MIN_PIN 18 -#define Z_MAX_PIN 19 +#define X_MIN_PIN 3 +#define X_MAX_PIN 2 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 +#define Z_MIN_PIN 18 +#define Z_MAX_PIN 19 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 18 + #define Z_MIN_PROBE_PIN 18 #endif // // Steppers // -#define X_STEP_PIN 67 // Mega/Due:54 - AGCM4:67 -#define X_DIR_PIN 68 // Mega/Due:55 - AGCM4:68 -#define X_ENABLE_PIN 38 +#define X_STEP_PIN 67 // Mega/Due:54 - AGCM4:67 +#define X_DIR_PIN 68 // Mega/Due:55 - AGCM4:68 +#define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN 47 + #define X_CS_PIN 47 #endif -#define Y_STEP_PIN 73 // Mega/Due:60 - AGCM4:73 -#define Y_DIR_PIN 74 // Mega/Due:61 - AGCM4:74 -#define Y_ENABLE_PIN 69 // Mega/Due:56 - AGCM4:69 +#define Y_STEP_PIN 73 // Mega/Due:60 - AGCM4:73 +#define Y_DIR_PIN 74 // Mega/Due:61 - AGCM4:74 +#define Y_ENABLE_PIN 69 // Mega/Due:56 - AGCM4:69 #ifndef Y_CS_PIN - #define Y_CS_PIN 45 + #define Y_CS_PIN 45 #endif -#define Z_STEP_PIN 46 -#define Z_DIR_PIN 48 -#define Z_ENABLE_PIN 54 // Mega/Due:62 - AGCM4:54 +#define Z_STEP_PIN 46 +#define Z_DIR_PIN 48 +#define Z_ENABLE_PIN 54 // Mega/Due:62 - AGCM4:54 #ifndef Z_CS_PIN - #define Z_CS_PIN 32 + #define Z_CS_PIN 32 #endif -#define Z2_STEP_PIN 36 -#define Z2_DIR_PIN 34 -#define Z2_ENABLE_PIN 30 +#define Z2_STEP_PIN 36 +#define Z2_DIR_PIN 34 +#define Z2_ENABLE_PIN 30 #ifndef Z2_CS_PIN - #define Z2_CS_PIN 22 + #define Z2_CS_PIN 22 #endif -#define E0_STEP_PIN 26 -#define E0_DIR_PIN 28 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 26 +#define E0_DIR_PIN 28 +#define E0_ENABLE_PIN 24 #ifndef E0_CS_PIN - #define E0_CS_PIN 43 + #define E0_CS_PIN 43 #endif // // Temperature Sensors // -#define TEMP_0_PIN 13 -#define TEMP_BED_PIN 14 -#define TEMP_CHAMBER_PIN 15 +#define TEMP_0_PIN 13 +#define TEMP_BED_PIN 14 +#define TEMP_CHAMBER_PIN 15 // // Heaters / Fans // -#define HEATER_0_PIN 10 -#define HEATER_BED_PIN 8 -#define FAN_PIN 9 -#define FAN1_PIN 7 -#define FAN2_PIN 12 +#define HEATER_0_PIN 10 +#define HEATER_BED_PIN 8 +#define FAN_PIN 9 +#define FAN1_PIN 7 +#define FAN2_PIN 12 // // Misc. Functions // -#define SDSS 53 -#define LED_PIN 13 +#define SDSS 53 +#define LED_PIN 13 #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 5 // Analog Input on AUX2 + #define FILWIDTH_PIN 5 // Analog Input on AUX2 #endif // RAMPS 1.4 DIO 4 on the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 4 + #define FIL_RUNOUT_PIN 4 #endif #ifndef PS_ON_PIN - #define PS_ON_PIN 39 + #define PS_ON_PIN 39 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN) - #if NUM_SERVOS <= 1 // Prefer the servo connector - #define CASE_LIGHT_PIN 6 // Hardware PWM + #if NUM_SERVOS <= 1 // Prefer the servo connector + #define CASE_LIGHT_PIN 6 // Hardware PWM #endif #endif @@ -147,10 +147,10 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN) - #if !NUM_SERVOS // Use servo connector if possible - #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM - #define SPINDLE_DIR_PIN 5 + #if !NUM_SERVOS // Use servo connector if possible + #define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM + #define SPINDLE_DIR_PIN 5 #else #error "No auto-assignable Spindle/Laser pins available." #endif @@ -161,13 +161,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI 58 // Mega/Due:66 - AGCM4:58 + #define TMC_SW_MOSI 58 // Mega/Due:66 - AGCM4:58 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO 44 + #define TMC_SW_MISO 44 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK 56 // Mega/Due:64 - AGCM4:56 + #define TMC_SW_SCK 56 // Mega/Due:64 - AGCM4:56 #endif #endif @@ -195,91 +195,91 @@ // #ifndef X_SERIAL_TX_PIN - #define X_SERIAL_TX_PIN 47 + #define X_SERIAL_TX_PIN 47 #endif #ifndef X_SERIAL_RX_PIN - #define X_SERIAL_RX_PIN 47 + #define X_SERIAL_RX_PIN 47 #endif #ifndef X2_SERIAL_TX_PIN - #define X2_SERIAL_TX_PIN -1 + #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN - #define X2_SERIAL_RX_PIN -1 + #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN - #define Y_SERIAL_TX_PIN 45 + #define Y_SERIAL_TX_PIN 45 #endif #ifndef Y_SERIAL_RX_PIN - #define Y_SERIAL_RX_PIN 45 + #define Y_SERIAL_RX_PIN 45 #endif #ifndef Y2_SERIAL_TX_PIN - #define Y2_SERIAL_TX_PIN -1 + #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN - #define Y2_SERIAL_RX_PIN -1 + #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN - #define Z_SERIAL_TX_PIN 32 + #define Z_SERIAL_TX_PIN 32 #endif #ifndef Z_SERIAL_RX_PIN - #define Z_SERIAL_RX_PIN 32 + #define Z_SERIAL_RX_PIN 32 #endif #ifndef Z2_SERIAL_TX_PIN - #define Z2_SERIAL_TX_PIN 22 + #define Z2_SERIAL_TX_PIN 22 #endif #ifndef Z2_SERIAL_RX_PIN - #define Z2_SERIAL_RX_PIN 22 + #define Z2_SERIAL_RX_PIN 22 #endif #ifndef E0_SERIAL_TX_PIN - #define E0_SERIAL_TX_PIN 43 + #define E0_SERIAL_TX_PIN 43 #endif #ifndef E0_SERIAL_RX_PIN - #define E0_SERIAL_RX_PIN 43 + #define E0_SERIAL_RX_PIN 43 #endif #ifndef E1_SERIAL_TX_PIN - #define E1_SERIAL_TX_PIN -1 + #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN - #define E1_SERIAL_RX_PIN -1 + #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN - #define E2_SERIAL_TX_PIN -1 + #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN - #define E2_SERIAL_RX_PIN -1 + #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN - #define E3_SERIAL_TX_PIN -1 + #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN - #define E3_SERIAL_RX_PIN -1 + #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN - #define E4_SERIAL_TX_PIN -1 + #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN - #define E4_SERIAL_RX_PIN -1 + #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN - #define E5_SERIAL_TX_PIN -1 + #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN - #define E5_SERIAL_RX_PIN -1 + #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN - #define E6_SERIAL_TX_PIN -1 + #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN - #define E6_SERIAL_RX_PIN -1 + #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN - #define E7_SERIAL_TX_PIN -1 + #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN - #define E7_SERIAL_RX_PIN -1 + #define E7_SERIAL_RX_PIN -1 #endif #endif @@ -345,17 +345,17 @@ // #define DOGLCD_SCK 23 // #define DOGLCD_A0 LCD_PINS_DC #else - #define LCD_PINS_RS 16 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 23 - #define LCD_PINS_D5 25 - #define LCD_PINS_D6 27 + #define LCD_PINS_RS 16 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 23 + #define LCD_PINS_D5 25 + #define LCD_PINS_D6 27 #endif - #define LCD_PINS_D7 29 + #define LCD_PINS_D7 29 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 #endif #endif @@ -363,10 +363,10 @@ #if DISABLED(NEWPANEL) // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif @@ -378,22 +378,22 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 #if ENABLED(CR10_STOCKDISPLAY) // TO TEST // #define BTN_EN1 17 // #define BTN_EN2 23 #else - #define BTN_EN1 31 - #define BTN_EN2 33 + #define BTN_EN1 31 + #define BTN_EN2 33 #endif - #define BTN_ENC 35 + #define BTN_ENC 35 #ifndef SD_DETECT_PIN - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #endif - #define KILL_PIN 41 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) // TO TEST @@ -465,15 +465,15 @@ #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864) // TO TEST - //#define BEEPER_PIN 37 - //#define BTN_ENC 35 - //#define SD_DETECT_PIN 49 + //#define BEEPER_PIN 37 + //#define BTN_ENC 35 + //#define SD_DETECT_PIN 49 //#ifndef KILL_PIN // #define KILL_PIN 41 //#endif - #if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 + #if ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 // TO TEST // #define DOGLCD_A0 27 @@ -502,8 +502,8 @@ // #define BTN_EN1 33 // #define BTN_EN2 31 - //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems - // results in LCD soft SPI mode 3, SD soft SPI mode 0 + //#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems + // results in LCD soft SPI mode 3, SD soft SPI mode 0 // #define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally. @@ -600,12 +600,12 @@ // SD Support // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif #if SD_CONNECTION_IS(ONBOARD) #undef SDSS - #define SDSS 83 + #define SDSS 83 #undef SD_DETECT_PIN - #define SD_DETECT_PIN 95 + #define SD_DETECT_PIN 95 #endif diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h index ebd0503712..73145a3cdb 100644 --- a/Marlin/src/pins/sanguino/pins_ANET_10.h +++ b/Marlin/src/pins/sanguino/pins_ANET_10.h @@ -98,50 +98,50 @@ // // Limit Switches // -#define X_STOP_PIN 18 -#define Y_STOP_PIN 19 -#define Z_STOP_PIN 20 +#define X_STOP_PIN 18 +#define Y_STOP_PIN 19 +#define Z_STOP_PIN 20 // // Steppers // -#define X_STEP_PIN 15 -#define X_DIR_PIN 21 -#define X_ENABLE_PIN 14 +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 +#define X_ENABLE_PIN 14 -#define Y_STEP_PIN 22 -#define Y_DIR_PIN 23 -#define Y_ENABLE_PIN 14 +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 +#define Y_ENABLE_PIN 14 -#define Z_STEP_PIN 3 -#define Z_DIR_PIN 2 -#define Z_ENABLE_PIN 26 +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 +#define Z_ENABLE_PIN 26 -#define E0_STEP_PIN 1 -#define E0_DIR_PIN 0 -#define E0_ENABLE_PIN 14 +#define E0_STEP_PIN 1 +#define E0_DIR_PIN 0 +#define E0_ENABLE_PIN 14 // // Temperature Sensors // -#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) -#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) +#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) +#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) // // Heaters / Fans // -#define HEATER_0_PIN 13 // (extruder) -#define HEATER_BED_PIN 12 // (bed) +#define HEATER_0_PIN 13 // (extruder) +#define HEATER_BED_PIN 12 // (bed) #ifndef FAN_PIN - #define FAN_PIN 4 + #define FAN_PIN 4 #endif // // Misc. Functions // -#define SDSS 31 -#define LED_PIN -1 +#define SDSS 31 +#define LED_PIN -1 /** * LCD / Controller @@ -153,36 +153,36 @@ */ #if HAS_SPI_LCD - #define LCD_SDSS 28 + #define LCD_SDSS 28 #if ENABLED(ADC_KEYPAD) - #define SERVO0_PIN 27 // free for BLTouch/3D-Touch - #define LCD_PINS_RS 28 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 10 - #define LCD_PINS_D5 11 - #define LCD_PINS_D6 16 - #define LCD_PINS_D7 17 - #define ADC_KEYPAD_PIN 1 + #define SERVO0_PIN 27 // free for BLTouch/3D-Touch + #define LCD_PINS_RS 28 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 10 + #define LCD_PINS_D5 11 + #define LCD_PINS_D6 16 + #define LCD_PINS_D7 17 + #define ADC_KEYPAD_PIN 1 #elif EITHER(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER, ANET_FULL_GRAPHICS_LCD) // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics // display using an adapter board // https://go.aisler.net/benlye/anet-lcd-adapter/pcb // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748 - #define SERVO0_PIN 29 // free for BLTouch/3D-Touch - #define BEEPER_PIN 17 - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 28 - #define LCD_PINS_D4 30 - #define BTN_EN1 11 - #define BTN_EN2 10 - #define BTN_ENC 16 + #define SERVO0_PIN 29 // free for BLTouch/3D-Touch + #define BEEPER_PIN 17 + #define LCD_PINS_RS 27 + #define LCD_PINS_ENABLE 28 + #define LCD_PINS_D4 30 + #define BTN_EN1 11 + #define BTN_EN2 10 + #define BTN_ENC 16 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #define BOARD_ST7920_DELAY_2 DELAY_NS(63) #define BOARD_ST7920_DELAY_3 DELAY_NS(125) - #define STD_ENCODER_PULSES_PER_STEP 4 - #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + #define STD_ENCODER_PULSES_PER_STEP 4 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 #endif #else - #define SERVO0_PIN 27 + #define SERVO0_PIN 27 #endif /** diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h index 833f99fb7f..b9a917d65d 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h @@ -55,47 +55,47 @@ #endif #define BOARD_INFO_NAME "Gen3 Monolithic" -#define DEBUG_PIN 0 +#define DEBUG_PIN 0 // // Limit Switches // -#define X_STOP_PIN 20 -#define Y_STOP_PIN 25 -#define Z_STOP_PIN 30 +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 // // Steppers // -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 24 // actually uses Y_enable_pin +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 // actually uses Y_enable_pin -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 // shared with X_enable_pin +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 // shared with X_enable_pin -#define Z_STEP_PIN 27 -#define Z_DIR_PIN 28 -#define Z_ENABLE_PIN 29 +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 -#define E0_STEP_PIN 12 -#define E0_DIR_PIN 17 -#define E0_ENABLE_PIN 3 +#define E0_STEP_PIN 12 +#define E0_DIR_PIN 17 +#define E0_ENABLE_PIN 3 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input +#define TEMP_0_PIN 0 // Analog Input // // Heaters // -#define HEATER_0_PIN 16 +#define HEATER_0_PIN 16 // // Misc. Functions // -#define PS_ON_PIN 14 // Alex, does this work on the card? +#define PS_ON_PIN 14 // Alex, does this work on the card? // Alex extras from Gen3+ diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h index c7c037fd4d..6cd6fdaf27 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h @@ -50,7 +50,6 @@ * */ - #if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__) #error "Oops! Select 'Sanguino' in 'Tools > Boards' and 'ATmega644P' or 'ATmega1284P' in 'Tools > Processor.'" #endif @@ -60,43 +59,43 @@ // // Limit Switches // -#define X_STOP_PIN 20 -#define Y_STOP_PIN 25 -#define Z_STOP_PIN 30 +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 // // Steppers // -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 19 +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 27 -#define Z_DIR_PIN 28 -#define Z_ENABLE_PIN 29 +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 -#define E0_STEP_PIN 17 -#define E0_DIR_PIN 21 -#define E0_ENABLE_PIN 13 +#define E0_STEP_PIN 17 +#define E0_DIR_PIN 21 +#define E0_ENABLE_PIN 13 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input (pin 33 extruder) -#define TEMP_BED_PIN 5 // Analog Input (pin 34 bed) +#define TEMP_0_PIN 0 // Analog Input (pin 33 extruder) +#define TEMP_BED_PIN 5 // Analog Input (pin 34 bed) // // Heaters // -#define HEATER_0_PIN 12 -#define HEATER_BED_PIN 16 +#define HEATER_0_PIN 12 +#define HEATER_BED_PIN 16 // // Misc. Functions // -#define SDSS 4 -#define PS_ON_PIN 14 +#define SDSS 4 +#define PS_ON_PIN 14 diff --git a/Marlin/src/pins/sanguino/pins_GEN6.h b/Marlin/src/pins/sanguino/pins_GEN6.h index d1b8391bcd..0d2449ae6e 100644 --- a/Marlin/src/pins/sanguino/pins_GEN6.h +++ b/Marlin/src/pins/sanguino/pins_GEN6.h @@ -63,58 +63,58 @@ // // Limit Switches // -#define X_STOP_PIN 20 -#define Y_STOP_PIN 25 -#define Z_STOP_PIN 30 +#define X_STOP_PIN 20 +#define Y_STOP_PIN 25 +#define Z_STOP_PIN 30 // // Steppers // -#define X_STEP_PIN 15 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 19 +#define X_STEP_PIN 15 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 19 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 27 -#define Z_DIR_PIN 28 -#define Z_ENABLE_PIN 29 +#define Z_STEP_PIN 27 +#define Z_DIR_PIN 28 +#define Z_ENABLE_PIN 29 -#define E0_STEP_PIN 4 // Edited @ EJE Electronics 20100715 -#define E0_DIR_PIN 2 // Edited @ EJE Electronics 20100715 -#define E0_ENABLE_PIN 3 // Added @ EJE Electronics 20100715 +#define E0_STEP_PIN 4 // Edited @ EJE Electronics 20100715 +#define E0_DIR_PIN 2 // Edited @ EJE Electronics 20100715 +#define E0_ENABLE_PIN 3 // Added @ EJE Electronics 20100715 // // Temperature Sensor // -#define TEMP_0_PIN 5 // Analog Input +#define TEMP_0_PIN 5 // Analog Input // // Heaters // -#define HEATER_0_PIN 14 // changed @ rkoeppl 20110410 +#define HEATER_0_PIN 14 // changed @ rkoeppl 20110410 #if !MB(GEN6) - #define HEATER_BED_PIN 1 // changed @ rkoeppl 20110410 - #define TEMP_BED_PIN 0 // Analog Input + #define HEATER_BED_PIN 1 // changed @ rkoeppl 20110410 + #define TEMP_BED_PIN 0 // Analog Input #endif // // Misc. Functions // -#define SDSS 17 -#define DEBUG_PIN 0 -#define CASE_LIGHT_PIN 16 // Hardware PWM +#define SDSS 17 +#define DEBUG_PIN 0 +#define CASE_LIGHT_PIN 16 // Hardware PWM // RS485 pins -#define TX_ENABLE_PIN 12 -#define RX_ENABLE_PIN 13 +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 5 // Pullup or pulldown! -#define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM -#define SPINDLE_DIR_PIN 6 +#define SPINDLE_LASER_ENA_PIN 5 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM +#define SPINDLE_DIR_PIN 6 diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h index 4ab53faa98..bb0e44a300 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_12.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h @@ -61,90 +61,89 @@ #endif #ifndef GEN7_VERSION - #define GEN7_VERSION 12 // v1.x + #define GEN7_VERSION 12 // v1.x #endif // // Limit Switches // -#define X_MIN_PIN 7 -#define Y_MIN_PIN 5 -#define Z_MIN_PIN 1 -#define Z_MAX_PIN 0 -#define Y_MAX_PIN 2 -#define X_MAX_PIN 6 - +#define X_MIN_PIN 7 +#define Y_MIN_PIN 5 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 +#define Y_MAX_PIN 2 +#define X_MAX_PIN 6 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 0 + #define Z_MIN_PROBE_PIN 0 #endif // // Steppers // -#define X_STEP_PIN 19 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 26 -#define Z_DIR_PIN 25 -#define Z_ENABLE_PIN 24 +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 -#define E0_STEP_PIN 28 -#define E0_DIR_PIN 27 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 3 +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 -#if !defined(FAN_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin - #define FAN_PIN 31 +#if !defined(FAN_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin + #define FAN_PIN 31 #endif // // Misc. Functions // -#define PS_ON_PIN 15 +#define PS_ON_PIN 15 #if GEN7_VERSION < 13 - #define CASE_LIGHT_PIN 16 // Hardware PWM -#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header - #define CASE_LIGHT_PIN 15 // Hardware PWM + #define CASE_LIGHT_PIN 16 // Hardware PWM +#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header + #define CASE_LIGHT_PIN 15 // Hardware PWM #endif // All these generations of Gen7 supply thermistor power // via PS_ON, so ignore bad thermistor readings -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 -#define DEBUG_PIN 0 +#define DEBUG_PIN 0 // RS485 pins -#define TX_ENABLE_PIN 12 -#define RX_ENABLE_PIN 13 +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown! -#define SPINDLE_DIR_PIN 11 +#define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown! +#define SPINDLE_DIR_PIN 11 #if GEN7_VERSION < 13 - #define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM -#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header - #define SPINDLE_LASER_PWM_PIN 15 // Hardware PWM + #define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM +#else // Gen7 v1.3 removed the I2C connector & signals so need to get PWM off the PC power supply header + #define SPINDLE_LASER_PWM_PIN 15 // Hardware PWM #endif diff --git a/Marlin/src/pins/sanguino/pins_GEN7_14.h b/Marlin/src/pins/sanguino/pins_GEN7_14.h index 5121b7d2e9..9dc9f2808b 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_14.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_14.h @@ -58,62 +58,62 @@ #define BOARD_INFO_NAME "Gen7 v1.4" -#define GEN7_VERSION 14 // v1.4 +#define GEN7_VERSION 14 // v1.4 // // Limit switches // -#define X_STOP_PIN 0 -#define Y_STOP_PIN 1 -#define Z_STOP_PIN 2 +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 // // Steppers // -#define X_STEP_PIN 29 -#define X_DIR_PIN 28 -#define X_ENABLE_PIN 25 +#define X_STEP_PIN 29 +#define X_DIR_PIN 28 +#define X_ENABLE_PIN 25 -#define Y_STEP_PIN 27 -#define Y_DIR_PIN 26 -#define Y_ENABLE_PIN 25 +#define Y_STEP_PIN 27 +#define Y_DIR_PIN 26 +#define Y_ENABLE_PIN 25 -#define Z_STEP_PIN 23 -#define Z_DIR_PIN 22 -#define Z_ENABLE_PIN 25 +#define Z_STEP_PIN 23 +#define Z_DIR_PIN 22 +#define Z_ENABLE_PIN 25 -#define E0_STEP_PIN 19 -#define E0_DIR_PIN 18 -#define E0_ENABLE_PIN 25 +#define E0_STEP_PIN 19 +#define E0_DIR_PIN 18 +#define E0_ENABLE_PIN 25 // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input -#define TEMP_BED_PIN 0 // Analog Input +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input // // Heaters // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 3 +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 // // Misc. Functions // -#define PS_ON_PIN 15 -#define CASE_LIGHT_PIN 15 // Hardware PWM +#define PS_ON_PIN 15 +#define CASE_LIGHT_PIN 15 // Hardware PWM // A pin for debugging -#define DEBUG_PIN 0 +#define DEBUG_PIN 0 // RS485 pins -#define TX_ENABLE_PIN 12 -#define RX_ENABLE_PIN 13 +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 20 // Pullup or pulldown! -#define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM -#define SPINDLE_DIR_PIN 21 +#define SPINDLE_LASER_ENA_PIN 20 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM +#define SPINDLE_DIR_PIN 21 diff --git a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h index 0f8a92f08d..67a9762fa0 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h @@ -64,76 +64,76 @@ // // Limit Switches // -#define X_STOP_PIN 0 -#define Y_STOP_PIN 1 -#define Z_STOP_PIN 2 +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 // // Steppers // -#define X_STEP_PIN 21 // different from standard GEN7 -#define X_DIR_PIN 20 // different from standard GEN7 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 21 // different from standard GEN7 +#define X_DIR_PIN 20 // different from standard GEN7 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 26 -#define Z_DIR_PIN 25 -#define Z_ENABLE_PIN 24 +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 -#define E0_STEP_PIN 28 -#define E0_DIR_PIN 27 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 // // Temperature Sensors // -#define TEMP_0_PIN 2 // Analog Input -#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed) +#define TEMP_0_PIN 2 // Analog Input +#define TEMP_BED_PIN 1 // Analog Input (pin 34 bed) // // Heaters // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 3 // (bed) +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 // (bed) // // Misc. Functions // -#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support -#define PS_ON_PIN 19 -#define CASE_LIGHT_PIN 15 // Hardware PWM +#define SDSS 31 // SCL pin of I2C header || CS Pin for SD Card support +#define PS_ON_PIN 19 +#define CASE_LIGHT_PIN 15 // Hardware PWM // A pin for debugging -#define DEBUG_PIN -1 +#define DEBUG_PIN -1 // // LCD / Controller // -#define BEEPER_PIN -1 +#define BEEPER_PIN -1 // 4bit LCD Support -#define LCD_PINS_RS 18 -#define LCD_PINS_ENABLE 17 -#define LCD_PINS_D4 16 -#define LCD_PINS_D5 15 -#define LCD_PINS_D6 13 -#define LCD_PINS_D7 14 +#define LCD_PINS_RS 18 +#define LCD_PINS_ENABLE 17 +#define LCD_PINS_D4 16 +#define LCD_PINS_D5 15 +#define LCD_PINS_D6 13 +#define LCD_PINS_D7 14 // Buttons are directly attached -#define BTN_EN1 11 -#define BTN_EN2 10 -#define BTN_ENC 12 +#define BTN_EN1 11 +#define BTN_EN2 10 +#define BTN_ENC 12 // RS485 pins -//#define TX_ENABLE_PIN 12 -//#define RX_ENABLE_PIN 13 +//#define TX_ENABLE_PIN 12 +//#define RX_ENABLE_PIN 13 // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 5 // Pullup or pulldown! -#define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM -#define SPINDLE_DIR_PIN 6 +#define SPINDLE_LASER_ENA_PIN 5 // Pullup or pulldown! +#define SPINDLE_LASER_PWM_PIN 16 // Hardware PWM +#define SPINDLE_DIR_PIN 6 diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h index 958ea78da4..10a52705e7 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h @@ -46,15 +46,15 @@ #undef LCD_PINS_D5 #undef LCD_PINS_D6 #undef LCD_PINS_D7 -#undef FIL_RUNOUT_PIN // Uses Beeper/LED Pin Pulled to GND +#undef FIL_RUNOUT_PIN // Uses Beeper/LED Pin Pulled to GND -#define LCD_SDSS 31 // Smart Controller SD card reader (rather than the Melzi) -#define LCD_PINS_RS 28 // ST9720 CS -#define LCD_PINS_ENABLE 17 // ST9720 DAT -#define LCD_PINS_D4 30 // ST9720 CLK +#define LCD_SDSS 31 // Smart Controller SD card reader (rather than the Melzi) +#define LCD_PINS_RS 28 // ST9720 CS +#define LCD_PINS_ENABLE 17 // ST9720 DAT +#define LCD_PINS_D4 30 // ST9720 CLK #if ENABLED(BLTOUCH) - #define SERVO0_PIN 27 + #define SERVO0_PIN 27 #undef BEEPER_PIN #endif @@ -67,7 +67,7 @@ #if ENABLED(MINIPANEL) #undef DOGLCD_CS - #define DOGLCD_CS LCD_PINS_RS + #define DOGLCD_CS LCD_PINS_RS #endif /** diff --git a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h index bf0e34a9ec..8e682453b4 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h @@ -36,12 +36,12 @@ #undef BTN_EN2 #undef BTN_ENC -#define LCD_PINS_RS 17 // ST9720 CS -#define LCD_PINS_ENABLE 16 // ST9720 DAT -#define LCD_PINS_D4 11 // ST9720 CLK -#define BTN_EN1 30 -#define BTN_EN2 29 -#define BTN_ENC 28 +#define LCD_PINS_RS 17 // ST9720 CS +#define LCD_PINS_ENABLE 16 // ST9720 DAT +#define LCD_PINS_D4 11 // ST9720 CLK +#define BTN_EN1 30 +#define BTN_EN2 29 +#define BTN_ENC 28 // Alter timing for graphical display #if HAS_GRAPHICAL_LCD diff --git a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h index 50433f6244..88b80dfb89 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h @@ -40,16 +40,16 @@ #undef BTN_ENC #undef LCD_SDSS -#define Z_ENABLE_PIN 14 -#define LCD_PINS_RS 30 -#define LCD_PINS_ENABLE 28 -#define LCD_PINS_D4 16 -#define LCD_PINS_D5 17 -#define LCD_PINS_D6 27 -#define LCD_PINS_D7 29 -#define BTN_EN1 10 -#define BTN_EN2 11 -#define BTN_ENC 26 +#define Z_ENABLE_PIN 14 +#define LCD_PINS_RS 30 +#define LCD_PINS_ENABLE 28 +#define LCD_PINS_D4 16 +#define LCD_PINS_D5 17 +#define LCD_PINS_D6 27 +#define LCD_PINS_D7 29 +#define BTN_EN1 10 +#define BTN_EN2 11 +#define BTN_ENC 26 #if HAS_GRAPHICAL_LCD #define BOARD_ST7920_DELAY_1 DELAY_NS(0) diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h index c2ba1ed707..774910bd7d 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA.h +++ b/Marlin/src/pins/sanguino/pins_OMCA.h @@ -86,66 +86,66 @@ // // Limit Switches // -#define X_STOP_PIN 0 -#define Y_STOP_PIN 1 -#define Z_STOP_PIN 2 +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 // // Steppers // -#define X_STEP_PIN 26 -#define X_DIR_PIN 25 -#define X_ENABLE_PIN 10 +#define X_STEP_PIN 26 +#define X_DIR_PIN 25 +#define X_ENABLE_PIN 10 -#define Y_STEP_PIN 28 -#define Y_DIR_PIN 27 -#define Y_ENABLE_PIN 10 +#define Y_STEP_PIN 28 +#define Y_DIR_PIN 27 +#define Y_ENABLE_PIN 10 -#define Z_STEP_PIN 23 -#define Z_DIR_PIN 22 -#define Z_ENABLE_PIN 10 +#define Z_STEP_PIN 23 +#define Z_DIR_PIN 22 +#define Z_ENABLE_PIN 10 -#define E0_STEP_PIN 24 -#define E0_DIR_PIN 21 -#define E0_ENABLE_PIN 10 +#define E0_STEP_PIN 24 +#define E0_DIR_PIN 21 +#define E0_ENABLE_PIN 10 -#define E1_STEP_PIN -1 // 21 -#define E1_DIR_PIN -1 // 20 -#define E1_ENABLE_PIN -1 // 19 +#define E1_STEP_PIN -1 // 21 +#define E1_DIR_PIN -1 // 20 +#define E1_ENABLE_PIN -1 // 19 -#define E2_STEP_PIN -1 // 21 -#define E2_DIR_PIN -1 // 20 -#define E2_ENABLE_PIN -1 // 18 +#define E2_STEP_PIN -1 // 21 +#define E2_DIR_PIN -1 // 20 +#define E2_ENABLE_PIN -1 // 18 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input (1,2 or I2C) +#define TEMP_0_PIN 0 // Analog Input +#define TEMP_1_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input (1,2 or I2C) // // Heaters / Fans // -#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector -#define HEATER_BED_PIN 4 +#define HEATER_0_PIN 3 // DONE PWM on RIGHT connector +#define HEATER_BED_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 14 // PWM on MIDDLE connector + #define FAN_PIN 14 // PWM on MIDDLE connector #endif // // Misc. Functions // -#define SDSS 11 +#define SDSS 11 -#define I2C_SCL_PIN 16 -#define I2C_SDA_PIN 17 +#define I2C_SCL_PIN 16 +#define I2C_SDA_PIN 17 // future proofing -#define __FS 20 -#define __FD 19 -#define __GS 18 -#define __GD 13 +#define __FS 20 +#define __FD 19 +#define __GS 18 +#define __GD 13 -#define UNUSED_PWM 14 // PWM on LEFT connector +#define UNUSED_PWM 14 // PWM on LEFT connector diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h index b8340a3deb..73237743b8 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA_A.h +++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h @@ -85,54 +85,54 @@ // // Limit Switches // -#define X_STOP_PIN 0 -#define Y_STOP_PIN 1 -#define Z_STOP_PIN 2 +#define X_STOP_PIN 0 +#define Y_STOP_PIN 1 +#define Z_STOP_PIN 2 // // Steppers // -#define X_STEP_PIN 21 -#define X_DIR_PIN 20 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 21 +#define X_DIR_PIN 20 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 26 -#define Z_DIR_PIN 25 -#define Z_ENABLE_PIN 24 +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 -#define E0_STEP_PIN 28 -#define E0_DIR_PIN 27 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 -#define E1_STEP_PIN -1 // 19 -#define E1_DIR_PIN -1 // 18 -#define E1_ENABLE_PIN 24 +#define E1_STEP_PIN -1 // 19 +#define E1_DIR_PIN -1 // 18 +#define E1_ENABLE_PIN 24 -#define E2_STEP_PIN -1 // 17 -#define E2_DIR_PIN -1 // 16 -#define E2_ENABLE_PIN 24 +#define E2_STEP_PIN -1 // 17 +#define E2_DIR_PIN -1 // 16 +#define E2_ENABLE_PIN 24 // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input (D27) +#define TEMP_0_PIN 0 // Analog Input (D27) // // Heaters / Fans // -#define HEATER_0_PIN 4 +#define HEATER_0_PIN 4 #ifndef FAN_PIN - #define FAN_PIN 3 + #define FAN_PIN 3 #endif // // Misc. Functions // -#define SDSS 11 +#define SDSS 11 /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index 977ba16daf..50d3a53779 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -63,60 +63,60 @@ // // Limit Switches // -#define X_STOP_PIN 18 -#define Y_STOP_PIN 19 -#define Z_STOP_PIN 20 +#define X_STOP_PIN 18 +#define Y_STOP_PIN 19 +#define Z_STOP_PIN 20 // // Steppers // -#define X_STEP_PIN 15 -#define X_DIR_PIN 21 +#define X_STEP_PIN 15 +#define X_DIR_PIN 21 -#define Y_STEP_PIN 22 -#define Y_DIR_PIN 23 +#define Y_STEP_PIN 22 +#define Y_DIR_PIN 23 -#define Z_STEP_PIN 3 -#define Z_DIR_PIN 2 +#define Z_STEP_PIN 3 +#define Z_DIR_PIN 2 -#define E0_STEP_PIN 1 -#define E0_DIR_PIN 0 +#define E0_STEP_PIN 1 +#define E0_DIR_PIN 0 // // Temperature Sensors // -#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) -#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) +#define TEMP_0_PIN 7 // Analog Input (pin 33 extruder) +#define TEMP_BED_PIN 6 // Analog Input (pin 34 bed) // // Heaters / Fans // -#define HEATER_0_PIN 13 // (extruder) +#define HEATER_0_PIN 13 // (extruder) #if ENABLED(SANGUINOLOLU_V_1_2) - #define HEATER_BED_PIN 12 // (bed) - #define X_ENABLE_PIN 14 - #define Y_ENABLE_PIN 14 - #define Z_ENABLE_PIN 26 - #define E0_ENABLE_PIN 14 + #define HEATER_BED_PIN 12 // (bed) + #define X_ENABLE_PIN 14 + #define Y_ENABLE_PIN 14 + #define Z_ENABLE_PIN 26 + #define E0_ENABLE_PIN 14 #if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2) - #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan + #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan #endif #else - #define HEATER_BED_PIN 14 // (bed) - #define X_ENABLE_PIN -1 - #define Y_ENABLE_PIN -1 - #define Z_ENABLE_PIN -1 - #define E0_ENABLE_PIN -1 + #define HEATER_BED_PIN 14 // (bed) + #define X_ENABLE_PIN -1 + #define Y_ENABLE_PIN -1 + #define Z_ENABLE_PIN -1 + #define E0_ENABLE_PIN -1 #endif #if !defined(FAN_PIN) && (MB(AZTEEG_X1, STB_11) || IS_MELZI) - #define FAN_PIN 4 // Works for Panelolu2 too + #define FAN_PIN 4 // Works for Panelolu2 too #endif // @@ -129,17 +129,17 @@ * If you encounter issues with these pins, upgrade your * Sanguino libraries! See #368. */ -//#define SDSS 24 -#define SDSS 31 +//#define SDSS 24 +#define SDSS 31 #if IS_MELZI - #define LED_PIN 27 + #define LED_PIN 27 #elif MB(STB_11) - #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED + #define LCD_BACKLIGHT_PIN 17 // LCD backlight LED #endif -#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header - #define CASE_LIGHT_PIN 4 // Hardware PWM - see if IO Header is available +#if NONE(SPINDLE_FEATURE, LASER_FEATURE) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)// try to use IO Header + #define CASE_LIGHT_PIN 4 // Hardware PWM - see if IO Header is available #endif /** @@ -156,57 +156,57 @@ // #if HAS_SPI_LCD - #define SD_DETECT_PIN -1 + #define SD_DETECT_PIN -1 #if HAS_GRAPHICAL_LCD #if ENABLED(LCD_FOR_MELZI) - #define LCD_PINS_RS 17 - #define LCD_PINS_ENABLE 16 - #define LCD_PINS_D4 11 + #define LCD_PINS_RS 17 + #define LCD_PINS_ENABLE 16 + #define LCD_PINS_D4 11 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #define BOARD_ST7920_DELAY_2 DELAY_NS(188) #define BOARD_ST7920_DELAY_3 DELAY_NS(0) - #elif ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 + #elif ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0 #if IS_MELZI - #define LCD_PINS_RS 30 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 29 // SID (MOSI) - #define LCD_PINS_D4 17 // SCK (CLK) clock + #define LCD_PINS_RS 30 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 29 // SID (MOSI) + #define LCD_PINS_D4 17 // SCK (CLK) clock // Pin 27 is taken by LED_PIN, but Melzi LED does nothing with // Marlin so this can be used for BEEPER_PIN. You can use this pin // with M42 instead of BEEPER_PIN. - #define BEEPER_PIN 27 - #else // Sanguinololu >=1.3 - #define LCD_PINS_RS 4 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 30 - #define LCD_PINS_D5 29 - #define LCD_PINS_D6 28 - #define LCD_PINS_D7 27 + #define BEEPER_PIN 27 + #else // Sanguinololu >=1.3 + #define LCD_PINS_RS 4 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 29 + #define LCD_PINS_D6 28 + #define LCD_PINS_D7 27 #endif #else - #define DOGLCD_A0 30 + #define DOGLCD_A0 30 #if ENABLED(MAKRPANEL) - #define BEEPER_PIN 29 - #define DOGLCD_CS 17 - #define LCD_BACKLIGHT_PIN 28 // PA3 + #define BEEPER_PIN 29 + #define DOGLCD_CS 17 + #define LCD_BACKLIGHT_PIN 28 // PA3 #elif IS_MELZI - #define BEEPER_PIN 27 - #define DOGLCD_CS 28 + #define BEEPER_PIN 27 + #define DOGLCD_CS 28 - #else // !MAKRPANEL + #else // !MAKRPANEL - #define DOGLCD_CS 29 + #define DOGLCD_CS 29 #endif @@ -218,57 +218,57 @@ //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards + #elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards - #define LCD_PINS_RS 28 - #define LCD_PINS_ENABLE 29 - #define LCD_PINS_D4 10 - #define LCD_PINS_D5 11 - #define LCD_PINS_D6 16 - #define LCD_PINS_D7 17 + #define LCD_PINS_RS 28 + #define LCD_PINS_ENABLE 29 + #define LCD_PINS_D4 10 + #define LCD_PINS_D5 11 + #define LCD_PINS_D6 16 + #define LCD_PINS_D7 17 #else - #define LCD_PINS_RS 4 - #define LCD_PINS_ENABLE 17 - #define LCD_PINS_D4 30 - #define LCD_PINS_D5 29 - #define LCD_PINS_D6 28 - #define LCD_PINS_D7 27 + #define LCD_PINS_RS 4 + #define LCD_PINS_ENABLE 17 + #define LCD_PINS_D4 30 + #define LCD_PINS_D5 29 + #define LCD_PINS_D6 28 + #define LCD_PINS_D7 27 #endif #if ENABLED(LCD_FOR_MELZI) - #define BTN_ENC 28 - #define BTN_EN1 29 - #define BTN_EN2 30 + #define BTN_ENC 28 + #define BTN_EN1 29 + #define BTN_EN2 30 - #elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards + #elif ENABLED(ZONESTAR_LCD) // For the Tronxy Melzi boards - #define ADC_KEYPAD_PIN 1 - #define BTN_EN1 -1 - #define BTN_EN2 -1 + #define ADC_KEYPAD_PIN 1 + #define BTN_EN1 -1 + #define BTN_EN2 -1 #elif ENABLED(LCD_I2C_PANELOLU2) #if IS_MELZI - #define BTN_ENC 29 - #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi + #define BTN_ENC 29 + #define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi #else - #define BTN_ENC 30 + #define BTN_ENC 30 #endif - #else // !LCD_FOR_MELZI && !ZONESTAR_LCD && !LCD_I2C_PANELOLU2 + #else // !LCD_FOR_MELZI && !ZONESTAR_LCD && !LCD_I2C_PANELOLU2 - #define BTN_ENC 16 - #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi + #define BTN_ENC 16 + #define LCD_SDSS 28 // Smart Controller SD card reader rather than the Melzi #endif #if ENABLED(NEWPANEL) && !defined(BTN_EN1) - #define BTN_EN1 11 - #define BTN_EN2 10 + #define BTN_EN1 11 + #define BTN_EN2 10 #endif #endif // HAS_SPI_LCD @@ -277,13 +277,13 @@ // M3/M4/M5 - Spindle/Laser Control // #if HAS_CUTTER - #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL) // try to use IO Header + #if !MB(AZTEEG_X1) && ENABLED(SANGUINOLOLU_V_1_2) && !BOTH(ULTRA_LCD, NEWPANEL)// try to use IO Header - #define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown! - #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM - #define SPINDLE_DIR_PIN 11 + #define SPINDLE_LASER_ENA_PIN 10 // Pullup or pulldown! + #define SPINDLE_LASER_PWM_PIN 4 // Hardware PWM + #define SPINDLE_DIR_PIN 11 - #elif !MB(MELZI) // use X stepper motor socket + #elif !MB(MELZI) // use X stepper motor socket /** * To control the spindle speed and have an LCD you must sacrifice @@ -315,11 +315,11 @@ #undef X_DIR_PIN #undef X_ENABLE_PIN #undef X_STEP_PIN - #define X_DIR_PIN 0 - #define X_ENABLE_PIN 14 - #define X_STEP_PIN 1 - #define SPINDLE_LASER_PWM_PIN 15 // Hardware PWM - #define SPINDLE_LASER_ENA_PIN 21 // Pullup! - #define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin + #define X_DIR_PIN 0 + #define X_ENABLE_PIN 14 + #define X_STEP_PIN 1 + #define SPINDLE_LASER_PWM_PIN 15 // Hardware PWM + #define SPINDLE_LASER_ENA_PIN 21 // Pullup! + #define SPINDLE_DIR_PIN -1 // No pin available on the socket for the direction pin #endif #endif diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h index 528ec4455f..b945869cbc 100644 --- a/Marlin/src/pins/sanguino/pins_SETHI.h +++ b/Marlin/src/pins/sanguino/pins_SETHI.h @@ -57,69 +57,69 @@ #define BOARD_INFO_NAME "Sethi 3D_1" #ifndef GEN7_VERSION - #define GEN7_VERSION 12 // v1.x + #define GEN7_VERSION 12 // v1.x #endif // // Limit Switches // -#define X_STOP_PIN 2 -#define Y_STOP_PIN 0 -#define Z_MIN_PIN 1 -#define Z_MAX_PIN 0 +#define X_STOP_PIN 2 +#define Y_STOP_PIN 0 +#define Z_MIN_PIN 1 +#define Z_MAX_PIN 0 // // Steppers // -#define X_STEP_PIN 19 -#define X_DIR_PIN 18 -#define X_ENABLE_PIN 24 +#define X_STEP_PIN 19 +#define X_DIR_PIN 18 +#define X_ENABLE_PIN 24 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 22 -#define Y_ENABLE_PIN 24 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 22 +#define Y_ENABLE_PIN 24 -#define Z_STEP_PIN 26 -#define Z_DIR_PIN 25 -#define Z_ENABLE_PIN 24 +#define Z_STEP_PIN 26 +#define Z_DIR_PIN 25 +#define Z_ENABLE_PIN 24 -#define E0_STEP_PIN 28 -#define E0_DIR_PIN 27 -#define E0_ENABLE_PIN 24 +#define E0_STEP_PIN 28 +#define E0_DIR_PIN 27 +#define E0_ENABLE_PIN 24 // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 4 -#define HEATER_BED_PIN 3 +#define HEATER_0_PIN 4 +#define HEATER_BED_PIN 3 #ifndef FAN_PIN #if GEN7_VERSION >= 13 // Gen7 v1.3 removed the fan pin - #define FAN_PIN -1 + #define FAN_PIN -1 #else - #define FAN_PIN 31 + #define FAN_PIN 31 #endif #endif // // Misc. Functions // -#define PS_ON_PIN 15 +#define PS_ON_PIN 15 // All these generations of Gen7 supply thermistor power // via PS_ON, so ignore bad thermistor readings -//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 +//#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 // our pin for debugging. -#define DEBUG_PIN 0 +#define DEBUG_PIN 0 // our RS485 pins -#define TX_ENABLE_PIN 12 -#define RX_ENABLE_PIN 13 +#define TX_ENABLE_PIN 12 +#define RX_ENABLE_PIN 13 diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h index fa555f4151..fef8eeb617 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -42,56 +42,56 @@ // // Servos // -#define SERVO0_PIN PA1 // SERVOS +#define SERVO0_PIN PA1 // SERVOS // // Limit Switches // -#define X_STOP_PIN PC1 // X-STOP -#define Y_STOP_PIN PC0 // Y-STOP -#define Z_STOP_PIN PC15 // Z-STOP +#define X_STOP_PIN PC1 // X-STOP +#define Y_STOP_PIN PC0 // Y-STOP +#define Z_STOP_PIN PC15 // Z-STOP // // Z Probe must be this pin // -#define Z_MIN_PROBE_PIN PC14 // PROBE +#define Z_MIN_PROBE_PIN PC14 // PROBE // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PC2 // E0-STOP + #define FIL_RUNOUT_PIN PC2 // E0-STOP #endif // // Steppers // -#define X_ENABLE_PIN PC7 -#define X_STEP_PIN PC6 -#define X_DIR_PIN PB15 +#define X_ENABLE_PIN PC7 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PB15 #ifndef X_CS_PIN - #define X_CS_PIN PC10 + #define X_CS_PIN PC10 #endif -#define Y_ENABLE_PIN PB14 -#define Y_STEP_PIN PB13 -#define Y_DIR_PIN PB12 +#define Y_ENABLE_PIN PB14 +#define Y_STEP_PIN PB13 +#define Y_DIR_PIN PB12 #ifndef Y_CS_PIN - #define Y_CS_PIN PC11 + #define Y_CS_PIN PC11 #endif -#define Z_ENABLE_PIN PB11 -#define Z_STEP_PIN PB10 -#define Z_DIR_PIN PB2 +#define Z_ENABLE_PIN PB11 +#define Z_STEP_PIN PB10 +#define Z_DIR_PIN PB2 #ifndef Z_CS_PIN - #define Z_CS_PIN PC12 + #define Z_CS_PIN PC12 #endif -#define E0_ENABLE_PIN PB1 -#define E0_STEP_PIN PB0 -#define E0_DIR_PIN PC5 +#define E0_ENABLE_PIN PB1 +#define E0_STEP_PIN PB0 +#define E0_DIR_PIN PC5 #ifndef E0_CS_PIN - #define E0_CS_PIN PD2 + #define E0_CS_PIN PD2 #endif // @@ -99,13 +99,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PB5 + #define TMC_SW_MOSI PB5 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PB4 + #define TMC_SW_MISO PB4 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PB3 + #define TMC_SW_SCK PB3 #endif #endif @@ -124,17 +124,17 @@ // // Software serial // - #define X_SERIAL_TX_PIN PC10 - #define X_SERIAL_RX_PIN PC10 + #define X_SERIAL_TX_PIN PC10 + #define X_SERIAL_RX_PIN PC10 - #define Y_SERIAL_TX_PIN PC11 - #define Y_SERIAL_RX_PIN PC11 + #define Y_SERIAL_TX_PIN PC11 + #define Y_SERIAL_RX_PIN PC11 - #define Z_SERIAL_TX_PIN PC12 - #define Z_SERIAL_RX_PIN PC12 + #define Z_SERIAL_TX_PIN PC12 + #define Z_SERIAL_RX_PIN PC12 - #define E0_SERIAL_TX_PIN PD2 - #define E0_SERIAL_RX_PIN PD2 + #define E0_SERIAL_TX_PIN PD2 + #define E0_SERIAL_RX_PIN PD2 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -143,23 +143,23 @@ // // Temperature Sensors // -#define TEMP_0_PIN PA0 // Analog Input "TH0" -#define TEMP_BED_PIN PC3 // Analog Input "TB0" +#define TEMP_0_PIN PA0 // Analog Input "TH0" +#define TEMP_BED_PIN PC3 // Analog Input "TB0" // // Heaters / Fans // -#define HEATER_0_PIN PC8 // HE -#define HEATER_BED_PIN PC9 // HB -#define FAN_PIN PA8 // FAN0 +#define HEATER_0_PIN PC8 // HE +#define HEATER_BED_PIN PC9 // HB +#define FAN_PIN PA8 // FAN0 // // USB connect control // -#define USB_CONNECT_PIN PC13 +#define USB_CONNECT_PIN PC13 #define USB_CONNECT_INVERTING false -#define SD_DETECT_PIN PC4 +#define SD_DETECT_PIN PC4 /** * _____ @@ -172,27 +172,27 @@ * EXP1 */ -#define EXPA1_03_PIN PB7 -#define EXPA1_04_PIN PB8 -#define EXPA1_05_PIN PB9 -#define EXPA1_06_PIN PA10 -#define EXPA1_07_PIN -1 -#define EXPA1_08_PIN PA9 -#define EXPA1_09_PIN PB6 -#define EXPA1_10_PIN PA15 +#define EXPA1_03_PIN PB7 +#define EXPA1_04_PIN PB8 +#define EXPA1_05_PIN PB9 +#define EXPA1_06_PIN PA10 +#define EXPA1_07_PIN -1 +#define EXPA1_08_PIN PA9 +#define EXPA1_09_PIN PB6 +#define EXPA1_10_PIN PA15 #if HAS_SPI_LCD - #define BTN_ENC EXPA1_09_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN #if ENABLED(CR10_STOCKDISPLAY) - #define BEEPER_PIN EXPA1_10_PIN + #define BEEPER_PIN EXPA1_10_PIN - #define LCD_PINS_RS EXPA1_04_PIN - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_RS EXPA1_04_PIN + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) @@ -207,12 +207,12 @@ * EXP1 */ - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define DOGLCD_CS EXPA1_04_PIN + #define DOGLCD_A0 EXPA1_05_PIN + #define DOGLCD_SCK EXPA1_10_PIN + #define DOGLCD_MOSI EXPA1_03_PIN #define FORCE_SOFT_SPI - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 #else #error "Only CR10_STOCKDISPLAY, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_E3_DIP." @@ -226,8 +226,8 @@ #define HAS_ONBOARD_SD #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ON_BOARD_SPI_DEVICE 1 //SPI1 -#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card +#define ON_BOARD_SPI_DEVICE 1 //SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h index 77a412ad61..15bc01263a 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3.h @@ -40,66 +40,66 @@ // // Servos // -#define SERVO0_PIN PA1 +#define SERVO0_PIN PA1 // // Limit Switches // -#define X_STOP_PIN PC0 -#define Y_STOP_PIN PC1 -#define Z_STOP_PIN PC2 +#define X_STOP_PIN PC0 +#define Y_STOP_PIN PC1 +#define Z_STOP_PIN PC2 // // Z Probe must be this pins // -#define Z_MIN_PROBE_PIN PC14 +#define Z_MIN_PROBE_PIN PC14 // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PC15 // "E0-STOP" + #define FIL_RUNOUT_PIN PC15 // "E0-STOP" #endif // // Steppers // -#define X_ENABLE_PIN PB14 -#define X_STEP_PIN PB13 -#define X_DIR_PIN PB12 +#define X_ENABLE_PIN PB14 +#define X_STEP_PIN PB13 +#define X_DIR_PIN PB12 -#define Y_ENABLE_PIN PB11 -#define Y_STEP_PIN PB10 -#define Y_DIR_PIN PB2 +#define Y_ENABLE_PIN PB11 +#define Y_STEP_PIN PB10 +#define Y_DIR_PIN PB2 -#define Z_ENABLE_PIN PB1 -#define Z_STEP_PIN PB0 -#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PB1 +#define Z_STEP_PIN PB0 +#define Z_DIR_PIN PC5 -#define E0_ENABLE_PIN PD2 -#define E0_STEP_PIN PB3 -#define E0_DIR_PIN PB4 +#define E0_ENABLE_PIN PD2 +#define E0_STEP_PIN PB3 +#define E0_DIR_PIN PB4 // // Temperature Sensors // -#define TEMP_0_PIN PA0 // Analog Input -#define TEMP_BED_PIN PC3 // Analog Input +#define TEMP_0_PIN PA0 // Analog Input +#define TEMP_BED_PIN PC3 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN PC8 // EXTRUDER -#define HEATER_BED_PIN PC9 // BED -#define FAN_PIN PA8 +#define HEATER_0_PIN PC8 // EXTRUDER +#define HEATER_BED_PIN PC9 // BED +#define FAN_PIN PA8 // // USB connect control // -#define USB_CONNECT_PIN PC13 +#define USB_CONNECT_PIN PC13 #define USB_CONNECT_INVERTING false -#define SD_DETECT_PIN PC4 +#define SD_DETECT_PIN PC4 /** * _____ @@ -112,40 +112,40 @@ * EXP1 */ -#define EXPA1_03_PIN PB7 -#define EXPA1_04_PIN PB8 -#define EXPA1_05_PIN PB9 -#define EXPA1_06_PIN PA10 -#define EXPA1_07_PIN -1 -#define EXPA1_08_PIN PA9 -#define EXPA1_09_PIN PB6 -#define EXPA1_10_PIN PB5 +#define EXPA1_03_PIN PB7 +#define EXPA1_04_PIN PB8 +#define EXPA1_05_PIN PB9 +#define EXPA1_06_PIN PA10 +#define EXPA1_07_PIN -1 +#define EXPA1_08_PIN PA9 +#define EXPA1_09_PIN PB6 +#define EXPA1_10_PIN PB5 #if HAS_SPI_LCD #if ENABLED(CR10_STOCKDISPLAY) - #define BEEPER_PIN EXPA1_10_PIN + #define BEEPER_PIN EXPA1_10_PIN - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN - #define LCD_PINS_RS EXPA1_04_PIN - #define LCD_PINS_ENABLE EXPA1_03_PIN - #define LCD_PINS_D4 EXPA1_05_PIN + #define LCD_PINS_RS EXPA1_04_PIN + #define LCD_PINS_ENABLE EXPA1_03_PIN + #define LCD_PINS_D4 EXPA1_05_PIN - #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! + #elif ENABLED(ZONESTAR_LCD) // ANET A8 LCD Controller - Must convert to 3.3V - CONNECTING TO 5V WILL DAMAGE THE BOARD! #error "CAUTION! ZONESTAR_LCD requires wiring modifications. See 'pins_BTT_SKR_MINI_E3.h' for details. Comment out this line to continue." - #define LCD_PINS_RS EXPA1_05_PIN - #define LCD_PINS_ENABLE EXPA1_09_PIN - #define LCD_PINS_D4 EXPA1_04_PIN - #define LCD_PINS_D5 EXPA1_06_PIN - #define LCD_PINS_D6 EXPA1_08_PIN - #define LCD_PINS_D7 EXPA1_10_PIN - #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! + #define LCD_PINS_RS EXPA1_05_PIN + #define LCD_PINS_ENABLE EXPA1_09_PIN + #define LCD_PINS_D4 EXPA1_04_PIN + #define LCD_PINS_D5 EXPA1_06_PIN + #define LCD_PINS_D6 EXPA1_08_PIN + #define LCD_PINS_D7 EXPA1_10_PIN + #define ADC_KEYPAD_PIN PA1 // Repurpose servo pin for ADC - CONNECTING TO 5V WILL DAMAGE THE BOARD! #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) @@ -159,16 +159,16 @@ * ----- * EXP1 */ - #define BTN_EN1 EXPA1_08_PIN - #define BTN_EN2 EXPA1_06_PIN - #define BTN_ENC EXPA1_09_PIN + #define BTN_EN1 EXPA1_08_PIN + #define BTN_EN2 EXPA1_06_PIN + #define BTN_ENC EXPA1_09_PIN - #define DOGLCD_CS EXPA1_04_PIN - #define DOGLCD_A0 EXPA1_05_PIN - #define DOGLCD_SCK EXPA1_10_PIN - #define DOGLCD_MOSI EXPA1_03_PIN + #define DOGLCD_CS EXPA1_04_PIN + #define DOGLCD_A0 EXPA1_05_PIN + #define DOGLCD_SCK EXPA1_10_PIN + #define DOGLCD_MOSI EXPA1_03_PIN #define FORCE_SOFT_SPI - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 #else @@ -184,8 +184,8 @@ #define HAS_ONBOARD_SD #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif -#define ON_BOARD_SPI_DEVICE 1 // SPI1 -#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card +#define ON_BOARD_SPI_DEVICE 1 // SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h index 8935da85af..961620ee8b 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V1_2.h @@ -25,7 +25,7 @@ #define BOARD_INFO_NAME "BIGTREE SKR Mini E3 V1.2" -#define NEOPIXEL_PIN PC7 // LED driving pin +#define NEOPIXEL_PIN PC7 // LED driving pin /** * TMC2208/TMC2209 stepper drivers @@ -34,17 +34,17 @@ // // Software serial // - #define X_SERIAL_TX_PIN PB15 - #define X_SERIAL_RX_PIN PB15 + #define X_SERIAL_TX_PIN PB15 + #define X_SERIAL_RX_PIN PB15 - #define Y_SERIAL_TX_PIN PC6 - #define Y_SERIAL_RX_PIN PC6 + #define Y_SERIAL_TX_PIN PC6 + #define Y_SERIAL_RX_PIN PC6 - #define Z_SERIAL_TX_PIN PC10 - #define Z_SERIAL_RX_PIN PC10 + #define Z_SERIAL_TX_PIN PC10 + #define Z_SERIAL_RX_PIN PC10 - #define E0_SERIAL_TX_PIN PC11 - #define E0_SERIAL_RX_PIN PC11 + #define E0_SERIAL_TX_PIN PC11 + #define E0_SERIAL_RX_PIN PC11 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index 08f666882e..fff3af5b6b 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -41,57 +41,57 @@ // // Limit Switches // -#define X_MIN_PIN PC2 -#define X_MAX_PIN PA2 -#define Y_MIN_PIN PC1 -#define Y_MAX_PIN PA1 -#define Z_MIN_PIN PC0 -#define Z_MAX_PIN PC3 +#define X_MIN_PIN PC2 +#define X_MAX_PIN PA2 +#define Y_MIN_PIN PC1 +#define Y_MAX_PIN PA1 +#define Z_MIN_PIN PC0 +#define Z_MAX_PIN PC3 // // Steppers // -#define X_STEP_PIN PC6 -#define X_DIR_PIN PC7 -#define X_ENABLE_PIN PB15 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PC7 +#define X_ENABLE_PIN PB15 -#define Y_STEP_PIN PB13 -#define Y_DIR_PIN PB14 -#define Y_ENABLE_PIN PB12 +#define Y_STEP_PIN PB13 +#define Y_DIR_PIN PB14 +#define Y_ENABLE_PIN PB12 -#define Z_STEP_PIN PB10 -#define Z_DIR_PIN PB11 -#define Z_ENABLE_PIN PB2 +#define Z_STEP_PIN PB10 +#define Z_DIR_PIN PB11 +#define Z_ENABLE_PIN PB2 -#define E0_STEP_PIN PC5 -#define E0_DIR_PIN PB0 -#define E0_ENABLE_PIN PC4 +#define E0_STEP_PIN PC5 +#define E0_DIR_PIN PB0 +#define E0_ENABLE_PIN PC4 #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_SCK - #define TMC_SW_SCK PB3 + #define TMC_SW_SCK PB3 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PB4 + #define TMC_SW_MISO PB4 #endif #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PB5 + #define TMC_SW_MOSI PB5 #endif #endif // // Heaters / Fans // -#define HEATER_0_PIN PA8 -#define FAN_PIN PC8 -#define HEATER_BED_PIN PC9 +#define HEATER_0_PIN PA8 +#define FAN_PIN PC8 +#define HEATER_BED_PIN PC9 // // Temperature Sensors // -#define TEMP_BED_PIN PB1 // Analog Input -#define TEMP_0_PIN PA0 // Analog Input +#define TEMP_BED_PIN PB1 // Analog Input +#define TEMP_0_PIN PA0 // Analog Input // // LCD Pins @@ -109,41 +109,41 @@ */ #if HAS_SPI_LCD - #define BEEPER_PIN PC10 - #define BTN_ENC PC11 + #define BEEPER_PIN PC10 + #define BTN_ENC PC11 #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS PC15 + #define LCD_PINS_RS PC15 - #define BTN_EN1 PB6 - #define BTN_EN2 PC13 + #define BTN_EN1 PB6 + #define BTN_EN2 PC13 - #define LCD_PINS_ENABLE PC14 - #define LCD_PINS_D4 PB7 + #define LCD_PINS_ENABLE PC14 + #define LCD_PINS_D4 PB7 #else - #define LCD_PINS_RS PC12 + #define LCD_PINS_RS PC12 - #define BTN_EN1 PD2 - #define BTN_EN2 PB8 + #define BTN_EN1 PD2 + #define BTN_EN2 PB8 - #define LCD_PINS_ENABLE PB6 + #define LCD_PINS_ENABLE PB6 #if ENABLED(FYSETC_MINI_12864) - #define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN PC13 - #define DOGLCD_A0 PC12 - #define DOGLCD_CS PB6 - #define DOGLCD_SCK PB3 - #define DOGLCD_MOSI PB5 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PC13 + #define DOGLCD_A0 PC12 + #define DOGLCD_CS PB6 + #define DOGLCD_SCK PB3 + #define DOGLCD_MOSI PB5 - #define FORCE_SOFT_SPI // SPI MODE3 + #define FORCE_SOFT_SPI // SPI MODE3 - #define LED_PIN PB7 // red pwm - //#define LED_PIN PC15 // green - //#define LED_PIN PC14 // blue + #define LED_PIN PB7 // red pwm + //#define LED_PIN PC15 // green + //#define LED_PIN PC14 // blue //#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) // #ifndef RGB_LED_R_PIN @@ -159,13 +159,13 @@ // #define NEOPIXEL_PIN PB7 //#endif - #else // !FYSETC_MINI_12864 + #else // !FYSETC_MINI_12864 - #define LCD_PINS_D4 PC13 + #define LCD_PINS_D4 PC13 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PB7 - #define LCD_PINS_D6 PC15 - #define LCD_PINS_D7 PC14 + #define LCD_PINS_D5 PB7 + #define LCD_PINS_D6 PC15 + #define LCD_PINS_D7 PC14 #endif #endif // !FYSETC_MINI_12864 @@ -182,26 +182,26 @@ // set SDCARD_CONNECTION form 'ONBOARD' to 'LCD' and use an external SD (connected to LCD) #define HAS_ONBOARD_SD #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif #if SD_CONNECTION_IS(LCD) #define ENABLE_SPI3 - #define SD_DETECT_PIN PB9 - #define SCK_PIN PB3 - #define MISO_PIN PB4 - #define MOSI_PIN PB5 - #define SS_PIN PA15 + #define SD_DETECT_PIN PB9 + #define SCK_PIN PB3 + #define MISO_PIN PB4 + #define MOSI_PIN PB5 + #define SS_PIN PA15 #elif SD_CONNECTION_IS(ONBOARD) #define ENABLE_SPI1 - #define SD_DETECT_PIN PA3 - #define SCK_PIN PA5 - #define MISO_PIN PA6 - #define MOSI_PIN PA7 - #define SS_PIN PA4 + #define SD_DETECT_PIN PA3 + #define SCK_PIN PA5 + #define MISO_PIN PA6 + #define MOSI_PIN PA7 + #define SS_PIN PA4 #endif -#define ON_BOARD_SPI_DEVICE 1 //SPI1 -#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card +#define ON_BOARD_SPI_DEVICE 1 //SPI1 +#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card #if HAS_GRAPHICAL_LCD #define BOARD_ST7920_DELAY_1 DELAY_NS(125) diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index 2db6b1bc0b..b9272c7211 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -41,69 +41,67 @@ // // Steppers // -#define X_STEP_PIN PE5 -#define X_DIR_PIN PE6 -#define X_ENABLE_PIN PC13 -#define X_MIN_PIN PG10 -#define X_MAX_PIN -1 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 +#define X_ENABLE_PIN PC13 +#define X_MIN_PIN PG10 +#define X_MAX_PIN -1 -#define Y_STEP_PIN PE2 -#define Y_DIR_PIN PE3 -#define Y_ENABLE_PIN PE4 -#define Y_MIN_PIN PA12 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 +#define Y_ENABLE_PIN PE4 +#define Y_MIN_PIN PA12 #define Y_MAX_PIN -#define Z_STEP_PIN PB9 -#define Z_DIR_PIN PE0 -#define Z_ENABLE_PIN PE1 -#define Z_MIN_PIN PA14 -#define Z_MAX_PIN -1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 +#define Z_ENABLE_PIN PE1 +#define Z_MIN_PIN PA14 +#define Z_MAX_PIN -1 -#define Y2_STEP_PIN -1 -#define Y2_DIR_PIN -1 -#define Y2_ENABLE_PIN -1 +#define Y2_STEP_PIN -1 +#define Y2_DIR_PIN -1 +#define Y2_ENABLE_PIN -1 -#define Z2_STEP_PIN -1 -#define Z2_DIR_PIN -1 -#define Z2_ENABLE_PIN -1 +#define Z2_STEP_PIN -1 +#define Z2_DIR_PIN -1 +#define Z2_ENABLE_PIN -1 -#define E0_STEP_PIN PB4 -#define E0_DIR_PIN PB5 -#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 +#define E0_ENABLE_PIN PB8 +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 - -#define E1_STEP_PIN -1 -#define E1_DIR_PIN -1 -#define E1_ENABLE_PIN -1 - -#define E2_STEP_PIN -1 -#define E2_DIR_PIN -1 -#define E2_ENABLE_PIN -1 +#define E2_STEP_PIN -1 +#define E2_DIR_PIN -1 +#define E2_ENABLE_PIN -1 // // Misc. Functions // -#define SDSS -1 -#define LED_PIN -1 -#define CASE_LIGHT_PIN PA8 // 8 +#define SDSS -1 +#define LED_PIN -1 +#define CASE_LIGHT_PIN PA8 // 8 -#define PS_ON_PIN -1 -#define KILL_PIN PD6 // LED strip 24v +#define PS_ON_PIN -1 +#define KILL_PIN PD6 // LED strip 24v // // Heaters / Fans // -#define HEATER_0_PIN PD12 // HOT-END -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 +#define HEATER_0_PIN PD12 // HOT-END +#define HEATER_1_PIN -1 +#define HEATER_2_PIN -1 -#define HEATER_BED_PIN PG11 // HOT-BED -#define HEATER_BED2_PIN -1 // BED2 -#define HEATER_BED3_PIN -1 // BED3 +#define HEATER_BED_PIN PG11 // HOT-BED +#define HEATER_BED2_PIN -1 // BED2 +#define HEATER_BED3_PIN -1 // BED3 #ifndef FAN_PIN - #define FAN_PIN PG14 // MAIN BOARD FAN + #define FAN_PIN PG14 // MAIN BOARD FAN #endif #define FAN_SOFT_PWM @@ -111,10 +109,10 @@ // // Temperature Sensors // -#define TEMP_BED_PIN PA0 // Analog Input -#define TEMP_0_PIN PA1 // Analog Input -#define TEMP_1_PIN -1 // Analog Input -#define TEMP_2_PIN -1 // Analog Input +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_2_PIN -1 // Analog Input // // LCD Pins @@ -122,31 +120,31 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) - #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock + #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PD3 // 51 // SID (MOSI) + #define LCD_PINS_D4 PD4 // 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #else - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN PC1 // 33 + #define BEEPER_PIN PC1 // 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK PC6 // 38 - //#define SHIFT_LD PC10 // 42 - //#define SHIFT_OUT PC8 // 40 - //#define SHIFT_EN PA1 // 17 + //#define SHIFT_CLK PC6 // 38 + //#define SHIFT_LD PC10 // 42 + //#define SHIFT_OUT PC8 // 40 + //#define SHIFT_EN PA1 // 17 #endif #endif @@ -154,127 +152,127 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN PC5 + #define BEEPER_PIN PC5 - #define BTN_EN1 PB15 // 31 - #define BTN_EN2 PC1 // 33 - #define BTN_ENC PC3 // 35 + #define BTN_EN1 PB15 // 31 + #define BTN_EN2 PC1 // 33 + #define BTN_ENC PC3 // 35 - #define SD_DETECT_PIN PD1 // 49 - #define KILL_PIN PC9 // 41 + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) - #define LCD_BACKLIGHT_PIN PC7 // 39 + #define LCD_BACKLIGHT_PIN PC7 // 39 #endif #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 PE0 // 64 - #define BTN_EN2 PD11 // 59 - #define BTN_ENC PD15 // 63 - #define SD_DETECT_PIN PC10 // 42 + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SD_DETECT_PIN PC10 // 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 PC15 // 47 - #define BTN_EN2 PC11 // 43 - #define BTN_ENC PC0 // 32 - #define LCD_SDSS PD5 // 53 - #define SD_DETECT_PIN -1 - #define KILL_PIN PC9 // 41 + #define BTN_EN1 PC15 // 47 + #define BTN_EN2 PC11 // 43 + #define BTN_ENC PC0 // 32 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN PC9 // 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 PB6 // 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 PB6 // 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 PA7 // 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 - #define LCD_SDSS PD5 // 53 - #define SD_DETECT_PIN PD1 // 49 + #define BTN_ENC -1 + #define LCD_SDSS PD5 // 53 + #define SD_DETECT_PIN PD1 // 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN PC1 // 33 + #define BEEPER_PIN PC1 // 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 PC12 // 44 - #define DOGLCD_CS PC13 // 45 + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PC13 // 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 PB6 // 22 - #define BTN_EN2 PA7 // 7 - #define BTN_ENC PC7 // 39 + #define BTN_EN1 PB6 // 22 + #define BTN_EN2 PA7 // 7 + #define BTN_ENC PC7 // 39 - #define SDSS PD5 // 53 - #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define SDSS PD5 // 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN PB15 // 31 + #define KILL_PIN PB15 // 31 - #define STAT_LED_RED_PIN PC0 // 32 - #define STAT_LED_BLUE_PIN PC3 // 35 + #define STAT_LED_RED_PIN PC0 // 32 + #define STAT_LED_BLUE_PIN PC3 // 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 PC3 // 35 - #define BTN_EN2 PC5 // 37 - #define BTN_ENC PB15 // 31 - #define SD_DETECT_PIN PD1 // 49 - #define LCD_SDSS PD5 // 53 - #define KILL_PIN PC9 // 41 - #define BEEPER_PIN PB7 // 23 - #define DOGLCD_CS PB13 // 29 - #define DOGLCD_A0 PB11 // 27 - #define LCD_BACKLIGHT_PIN PC1 // 33 + #define BTN_EN1 PC3 // 35 + #define BTN_EN2 PC5 // 37 + #define BTN_ENC PB15 // 31 + #define SD_DETECT_PIN PD1 // 49 + #define LCD_SDSS PD5 // 53 + #define KILL_PIN PC9 // 41 + #define BEEPER_PIN PB7 // 23 + #define DOGLCD_CS PB13 // 29 + #define DOGLCD_A0 PB11 // 27 + #define LCD_BACKLIGHT_PIN PC1 // 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN PC10 // 42 + #define BEEPER_PIN PC10 // 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 PC12 // 44 - #define DOGLCD_CS PE2 // 66 - #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65 - #define SDSS PD5 // 53 + #define DOGLCD_A0 PC12 // 44 + #define DOGLCD_CS PE2 // 66 + #define LCD_BACKLIGHT_PIN PE1 // 65 // backlight LED on A11/D65 + #define SDSS PD5 // 53 - #define KILL_PIN PE0 // 64 + #define KILL_PIN PE0 // 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 PC8 // 40 - #define BTN_EN2 PD15 // 63 - #define BTN_ENC PD11 // 59 + #define BTN_EN1 PC8 // 40 + #define BTN_EN2 PD15 // 63 + #define BTN_ENC PD11 // 59 // not connected to a pin - #define SD_DETECT_PIN PD1 // 49 + #define SD_DETECT_PIN PD1 // 49 #else // Beeper on AUX-4 - #define BEEPER_PIN PC1 // 33 + #define BEEPER_PIN PC1 // 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 PE0 // 64 - #define BTN_EN2 PD11 // 59 - #define BTN_ENC PD15 // 63 - #define SHIFT_OUT PC8 // 40 - #define SHIFT_CLK PC12 // 44 - #define SHIFT_LD PC10 // 42 + #define BTN_EN1 PE0 // 64 + #define BTN_EN2 PD11 // 59 + #define BTN_ENC PD15 // 63 + #define SHIFT_OUT PC8 // 40 + #define SHIFT_CLK PC12 // 44 + #define SHIFT_LD PC10 // 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 - #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 - #define BTN_ENC PD1 // 49 // AUX3 PIN 7 + #define BTN_EN1 PD11 // 59 // AUX2 PIN 3 + #define BTN_EN2 PD15 // 63 // AUX2 PIN 4 + #define BTN_ENC PD1 // 49 // AUX3 PIN 7 #else - #define BTN_EN1 PC5 // 37 - #define BTN_EN2 PC3 // 35 - #define BTN_ENC PB15 // 31 + #define BTN_EN1 PC5 // 37 + #define BTN_EN2 PC3 // 35 + #define BTN_ENC PB15 // 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN PD1 // 49 - #define KILL_PIN PC9 // 41 + #define SD_DETECT_PIN PD1 // 49 + #define KILL_PIN PC9 // 41 #else - //#define SD_DETECT_PIN -1 // Ramps doesn't use this + //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index db76042ab7..dcd1119c86 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -46,55 +46,55 @@ // // Limit Switches // -#define X_STOP_PIN PA1 -#define Y_STOP_PIN PA0 -#define Z_STOP_PIN PB14 +#define X_STOP_PIN PA1 +#define Y_STOP_PIN PA0 +#define Z_STOP_PIN PB14 // // Filament runout // #ifdef pins_v2_20190128 - #define FIL_RUNOUT_PIN PB15 + #define FIL_RUNOUT_PIN PB15 #else - #define FIL_RUNOUT_PIN PB5 + #define FIL_RUNOUT_PIN PB5 #endif // // Steppers // -#define X_STEP_PIN PB8 -#define X_DIR_PIN PB9 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB9 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PB2 +#define Y_STEP_PIN PB2 #ifdef pins_v2_20190128 - #define Y_DIR_PIN PB3 + #define Y_DIR_PIN PB3 #else - #define Y_DIR_PIN PB0 + #define Y_DIR_PIN PB0 #endif -#define Y_ENABLE_PIN PB1 +#define Y_ENABLE_PIN PB1 -#define Z_STEP_PIN PC0 -#define Z_DIR_PIN PC1 -#define Z_ENABLE_PIN PC2 +#define Z_STEP_PIN PC0 +#define Z_DIR_PIN PC1 +#define Z_ENABLE_PIN PC2 -#define E0_STEP_PIN PC15 -#define E0_DIR_PIN PC14 -#define E0_ENABLE_PIN PC13 +#define E0_STEP_PIN PC15 +#define E0_DIR_PIN PC14 +#define E0_ENABLE_PIN PC13 // // Stepper current PWM // // X:PA2 Y:PA3 Z:PB12 E:PB13 // changed for test -//#define MOTOR_CURRENT_PWM_XY_PIN PA3 -//#define MOTOR_CURRENT_PWM_Z_PIN PA2 // PB12 -//#define MOTOR_CURRENT_PWM_XY_PIN PB6 -//#define MOTOR_CURRENT_PWM_Z_PIN PB7 // PB12 -//#define MOTOR_CURRENT_PWM_E_PIN -1 // PB13 +//#define MOTOR_CURRENT_PWM_XY_PIN PA3 +//#define MOTOR_CURRENT_PWM_Z_PIN PA2 // PB12 +//#define MOTOR_CURRENT_PWM_XY_PIN PB6 +//#define MOTOR_CURRENT_PWM_Z_PIN PB7 // PB12 +//#define MOTOR_CURRENT_PWM_E_PIN -1 // PB13 // Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range #ifndef MOTOR_CURRENT_PWM_RANGE - #define MOTOR_CURRENT_PWM_RANGE 1500 // geo-f:old 2000 + #define MOTOR_CURRENT_PWM_RANGE 1500 // geo-f:old 2000 #endif #define DEFAULT_PWM_MOTOR_CURRENT {500, 500, 400} // geo-f:old 1300 1300 1250 @@ -112,37 +112,37 @@ // // Heaters / Fans // -#define HEATER_0_PIN PC7 -#define HEATER_BED_PIN PC6 +#define HEATER_0_PIN PC7 +#define HEATER_BED_PIN PC6 #ifndef FAN_PIN - #define FAN_PIN PC8 + #define FAN_PIN PC8 #endif // // Temperature Sensors // -#define TEMP_BED_PIN PC5 // Analog Input -#define TEMP_0_PIN PC4 // Analog Input +#define TEMP_BED_PIN PC5 // Analog Input +#define TEMP_0_PIN PC4 // Analog Input // // Misc. Functions // -#define SDSS PA4 +#define SDSS PA4 // // LCD Pins // #if HAS_SPI_LCD - #define BEEPER_PIN PC9 + #define BEEPER_PIN PC9 #if HAS_GRAPHICAL_LCD - #define DOGLCD_A0 PA15 + #define DOGLCD_A0 PA15 #ifdef pins_v2_20190128 - #define DOGLCD_CS PB5 + #define DOGLCD_CS PB5 #else - #define DOGLCD_CS PB7 + #define DOGLCD_CS PB7 #endif //#define LCD_CONTRAST_INIT 190 @@ -153,36 +153,36 @@ #endif // not connected to a pin - #define SD_DETECT_PIN PC3 + #define SD_DETECT_PIN PC3 #if ENABLED(NEWPANEL) // The encoder and click button - #define BTN_EN1 PC10 - #define BTN_EN2 PC11 - #define BTN_ENC PC12 + #define BTN_EN1 PC10 + #define BTN_EN2 PC11 + #define BTN_ENC PC12 #endif #ifdef pins_v2_20190128 - #define LCD_RESET_PIN PB4 + #define LCD_RESET_PIN PB4 #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB0 + #define RGB_LED_R_PIN PB0 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB6 + #define RGB_LED_G_PIN PB6 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PB7 + #define RGB_LED_B_PIN PB7 #endif #else - #define LCD_RESET_PIN PB6 + #define LCD_RESET_PIN PB6 #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB3 + #define RGB_LED_R_PIN PB3 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB4 + #define RGB_LED_G_PIN PB4 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PB5 + #define RGB_LED_B_PIN PB5 #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index a845ed161b..e726ca1831 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -44,38 +44,38 @@ // // Servos // -#define SERVO0_PIN PA0 +#define SERVO0_PIN PA0 // // Limit Switches // -#define X_STOP_PIN PA1 -#define Y_STOP_PIN PB4 -#define Z_STOP_PIN PA15 +#define X_STOP_PIN PA1 +#define Y_STOP_PIN PB4 +#define Z_STOP_PIN PA15 // // Filament runout // -#define FIL_RUNOUT_PIN PB5 +#define FIL_RUNOUT_PIN PB5 // // Steppers // -#define X_STEP_PIN PB8 -#define X_DIR_PIN PB9 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB9 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PB2 -#define Y_DIR_PIN PB3 -#define Y_ENABLE_PIN PB1 +#define Y_STEP_PIN PB2 +#define Y_DIR_PIN PB3 +#define Y_ENABLE_PIN PB1 -#define Z_STEP_PIN PC0 -#define Z_DIR_PIN PC1 -#define Z_ENABLE_PIN PC2 +#define Z_STEP_PIN PC0 +#define Z_DIR_PIN PC1 +#define Z_ENABLE_PIN PC2 -#define E0_STEP_PIN PC15 -#define E0_DIR_PIN PC14 -#define E0_ENABLE_PIN PC13 +#define E0_STEP_PIN PC15 +#define E0_DIR_PIN PC14 +#define E0_ENABLE_PIN PC13 #define X_HARDWARE_SERIAL MSerial2 #define Y_HARDWARE_SERIAL MSerial2 @@ -85,35 +85,35 @@ // // Heaters / Fans // -#define HEATER_0_PIN PC6 -#define HEATER_BED_PIN PC7 +#define HEATER_0_PIN PC6 +#define HEATER_BED_PIN PC7 #ifndef FAN_PIN - #define FAN_PIN PC8 + #define FAN_PIN PC8 #endif // // Temperature Sensors // -#define TEMP_BED_PIN PC5 // Analog Input -#define TEMP_0_PIN PC4 // Analog Input +#define TEMP_BED_PIN PC5 // Analog Input +#define TEMP_0_PIN PC4 // Analog Input // // Misc. Functions // -#define SDSS PA4 +#define SDSS PA4 // // LCD Pins // #if HAS_SPI_LCD - #define BEEPER_PIN PC9 + #define BEEPER_PIN PC9 #if HAS_GRAPHICAL_LCD - #define DOGLCD_A0 PB14 - #define DOGLCD_CS PB12 - #define DOGLCD_SCK PB13 - #define DOGLCD_MOSI PB15 + #define DOGLCD_A0 PB14 + #define DOGLCD_CS PB12 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 @@ -123,29 +123,29 @@ #endif #endif - #define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD - #define LCD_PINS_D4 PB13 // SCLK - #define LCD_PINS_ENABLE PB15 // DATA MOSI + #define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD + #define LCD_PINS_D4 PB13 // SCLK + #define LCD_PINS_ENABLE PB15 // DATA MOSI // not connected to a pin - #define SD_DETECT_PIN PC3 + #define SD_DETECT_PIN PC3 #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB0 + #define RGB_LED_R_PIN PB0 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB7 + #define RGB_LED_G_PIN PB7 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PB6 + #define RGB_LED_B_PIN PB6 #endif //#define LCD_CONTRAST_INIT 190 #if ENABLED(NEWPANEL) - #define BTN_EN1 PC11 - #define BTN_EN2 PC10 - #define BTN_ENC PC12 + #define BTN_EN1 PC11 + #define BTN_EN2 PC10 + #define BTN_ENC PC12 #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h index 3e283911b4..9c6412c0cb 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH_V12.h @@ -36,7 +36,7 @@ #undef RGB_LED_G_PIN #undef RGB_LED_B_PIN -#define FAN1_PIN PB0 // Fan1 +#define FAN1_PIN PB0 // Fan1 #if HAS_TMC_UART @@ -47,17 +47,17 @@ // // Software serial // - #define X_SERIAL_TX_PIN PA11 - #define X_SERIAL_RX_PIN PA12 + #define X_SERIAL_TX_PIN PA11 + #define X_SERIAL_RX_PIN PA12 - #define Y_SERIAL_TX_PIN PB6 - #define Y_SERIAL_RX_PIN PB7 + #define Y_SERIAL_TX_PIN PB6 + #define Y_SERIAL_RX_PIN PB7 - #define Z_SERIAL_TX_PIN PB10 - #define Z_SERIAL_RX_PIN PB11 + #define Z_SERIAL_TX_PIN PB10 + #define Z_SERIAL_RX_PIN PB11 - #define E0_SERIAL_TX_PIN PA2 - #define E0_SERIAL_RX_PIN PA3 + #define E0_SERIAL_TX_PIN PA2 + #define E0_SERIAL_RX_PIN PA3 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index a35bd29888..38cc615f64 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -53,32 +53,32 @@ // Enable EEPROM Emulation for this board as it doesn't have EEPROM #define FLASH_EEPROM_EMULATION -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB // // Limit Switches // -#define X_MIN_PIN PE5 // ENDSTOPS 15,17 -#define X_MAX_PIN PE4 // ENDSTOPS 16,18 -#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 -#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 -#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 -#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 // // Steppers // -#define X_STEP_PIN PC6 -#define X_DIR_PIN PD13 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PA12 -#define Y_DIR_PIN PA11 -#define Y_ENABLE_PIN PA15 +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD3 -#define Z_ENABLE_PIN PB3 +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 // Extruder stepper pins // NOTE: Numbering here is made according to EXT connector numbers, @@ -86,46 +86,46 @@ // That is, E0_*_PIN are the E2_* lines connected to E2_A1 step // stick that drives the EXT0 output on the board. // -#define E0_STEP_PIN PC14 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PC15 +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 -#define E1_STEP_PIN PA0 -#define E1_DIR_PIN PB6 -#define E1_ENABLE_PIN PA1 +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 -#define E2_STEP_PIN PB2 -#define E2_DIR_PIN PB11 -#define E2_ENABLE_PIN PC4 +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 // // Heaters / Fans // -#define HEATER_0_PIN PB0 // EXT0 port -#define HEATER_1_PIN PB5 // EXT1 port -#define HEATER_2_PIN PB4 // EXT2 port -#define HEATER_BED_PIN PB1 // CON2X3 hotbed port +#define HEATER_0_PIN PB0 // EXT0 port +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port -#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan -#define FAN1_PIN PB8 // EXT1 port -#define FAN2_PIN PB7 // EXT2 port +//#define FAN_PIN PB9 // EXT0 port +#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port // // Temperature Sensors // -#define TEMP_0_PIN PC2 // EXT0 port -#define TEMP_1_PIN PC1 // EXT1 port -#define TEMP_2_PIN PC0 // EXT2 port -#define TEMP_BED_PIN PC3 // CON2X3 hotbed port +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port // // Misc. Functions // -#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector // // LCD / Controller @@ -138,19 +138,19 @@ // Geeetech's LCD2004A Control Panel is very much like // RepRapDiscount Smart Controller, but adds an FFC40 connector // - #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE PE14 // SID (MOSI) - #define LCD_PINS_D4 PD8 // SCK (CLK) clock - #define LCD_PINS_D5 PD9 - #define LCD_PINS_D6 PD10 - #define LCD_PINS_D7 PE15 + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 #else // // Serial LCDs can be implemented in ExtUI // - //#define LCD_UART_TX PD8 - //#define LCD_UART_RX PD9 + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 #endif #if HAS_GRAPHICAL_LCD @@ -167,9 +167,9 @@ // RepRapDiscount Smart Controller, but adds an FFC40 connector // connected with a flat wire to J2 connector on the board. // - #define BTN_EN1 PE8 - #define BTN_EN2 PE9 - #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 #define GTM32_PRO_VB_USE_LCD_BEEPER #define GTM32_PRO_VB_USE_EXT_SDCARD @@ -182,10 +182,10 @@ // This is pin 32 on J2 FFC40 and pin, goes to the beeper // on Geeetech's version of RepRapDiscount Smart Controller // (e.g. on Rostock 301) - #define BEEPER_PIN PE12 + #define BEEPER_PIN PE12 #else // This is the beeper on the board itself - #define BEEPER_PIN PB10 + #define BEEPER_PIN PB10 #endif /** @@ -203,28 +203,28 @@ // // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // - #define SS_PIN PC11 - #define SCK_PIN PC12 - #define MOSI_PIN PD2 - #define MISO_PIN PC8 - #define SD_DETECT_PIN PC7 + #define SS_PIN PC11 + #define SCK_PIN PC12 + #define MOSI_PIN PD2 + #define MISO_PIN PC8 + #define SD_DETECT_PIN PC7 #else // // Use the on-board card socket labeled TF_CARD_SOCKET // - #define SS_PIN PA4 - #define SCK_PIN PA5 - #define MOSI_PIN PA7 - #define MISO_PIN PA6 - #define SD_DETECT_PIN -1 // Card detect is not connected + #define SS_PIN PA4 + #define SCK_PIN PA5 + #define MOSI_PIN PA7 + #define MISO_PIN PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected #endif -#define SDSS SS_PIN +#define SDSS SS_PIN // // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 -#define ESP_WIFI_MODULE_RESET_PIN -1 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index 4c14165f79..873d02b065 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -53,32 +53,32 @@ // Enable EEPROM Emulation for this board as it doesn't have EEPROM #define FLASH_EEPROM_EMULATION -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB // // Limit Switches // -#define X_MIN_PIN PE5 // ENDSTOPS 15,17 -#define X_MAX_PIN PE4 // ENDSTOPS 16,18 -#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 -#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 -#define Z_MIN_PIN PE0 // ENDSTOPS 3,5 -#define Z_MAX_PIN PE1 // ENDSTOPS 4,6 +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE0 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE1 // ENDSTOPS 4,6 // // Steppers // -#define X_STEP_PIN PC6 -#define X_DIR_PIN PD13 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PA12 -#define Y_DIR_PIN PA11 -#define Y_ENABLE_PIN PA15 +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD3 -#define Z_ENABLE_PIN PB3 +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 // Extruder stepper pins // NOTE: Numbering here is made according to EXT connector numbers, @@ -86,46 +86,46 @@ // That is, E0_*_PIN are the E2_* lines connected to E2_A1 step // stick that drives the EXT0 output on the board. // -#define E0_STEP_PIN PC14 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PC15 +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 -#define E1_STEP_PIN PA0 -#define E1_DIR_PIN PB6 -#define E1_ENABLE_PIN PA1 +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 -#define E2_STEP_PIN PB2 -#define E2_DIR_PIN PB11 -#define E2_ENABLE_PIN PC4 +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 // // Heaters / Fans // -#define HEATER_0_PIN PB0 // EXT0 port -#define HEATER_1_PIN PB5 // EXT1 port -#define HEATER_2_PIN PB4 // EXT2 port -#define HEATER_BED_PIN PB1 // CON2X3 hotbed port +#define HEATER_0_PIN PB0 // EXT0 port +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port -#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan -#define FAN1_PIN PB8 // EXT1 port -#define FAN2_PIN PB7 // EXT2 port +//#define FAN_PIN PB9 // EXT0 port +#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port // // Temperature Sensors // -#define TEMP_0_PIN PC2 // EXT0 port -#define TEMP_1_PIN PC1 // EXT1 port -#define TEMP_2_PIN PC0 // EXT2 port -#define TEMP_BED_PIN PC3 // CON2X3 hotbed port +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port // // Misc. Functions // -#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector // // LCD / Controller @@ -139,16 +139,16 @@ // RepRapDiscount Smart Controller, but adds an FFC40 connector // connected with a flat wire to J2 connector on the board. // - #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE PE14 // SID (MOSI) - #define LCD_PINS_D4 PD8 // SCK (CLK) clock - #define LCD_PINS_D5 PD9 - #define LCD_PINS_D6 PD10 - #define LCD_PINS_D7 PE15 + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 - #define BTN_EN1 PE8 - #define BTN_EN2 PE9 - #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 #define GTM32_PRO_VB_USE_LCD_BEEPER #define GTM32_PRO_VB_USE_EXT_SDCARD @@ -157,8 +157,8 @@ // // Serial LCDs can be implemented in ExtUI // - //#define LCD_UART_TX PD8 - //#define LCD_UART_RX PD9 + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 #endif #if HAS_GRAPHICAL_LCD @@ -182,10 +182,10 @@ // This is pin 32 on J2 FFC40 and pin, goes to the beeper // on Geeetech's version of RepRapDiscount Smart Controller // (e.g. on Rostock 301) - #define BEEPER_PIN PE12 + #define BEEPER_PIN PE12 #else // This is the beeper on the board itself - #define BEEPER_PIN PB10 + #define BEEPER_PIN PB10 #endif /** @@ -203,28 +203,28 @@ // // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // - #define SS_PIN PC11 - #define SCK_PIN PC12 - #define MOSI_PIN PD2 - #define MISO_PIN PC8 - #define SD_DETECT_PIN PC7 + #define SS_PIN PC11 + #define SCK_PIN PC12 + #define MOSI_PIN PD2 + #define MISO_PIN PC8 + #define SD_DETECT_PIN PC7 #else // // Use the on-board card socket labeled TF_CARD_SOCKET // - #define SS_PIN PA4 - #define SCK_PIN PA5 - #define MOSI_PIN PA7 - #define MISO_PIN PA6 - #define SD_DETECT_PIN -1 // Card detect is not connected + #define SS_PIN PA4 + #define SCK_PIN PA5 + #define MOSI_PIN PA7 + #define MISO_PIN PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected #endif -#define SDSS SS_PIN +#define SDSS SS_PIN // // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 -#define ESP_WIFI_MODULE_RESET_PIN -1 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index a35bd29888..38cc615f64 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -53,32 +53,32 @@ // Enable EEPROM Emulation for this board as it doesn't have EEPROM #define FLASH_EEPROM_EMULATION -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB // // Limit Switches // -#define X_MIN_PIN PE5 // ENDSTOPS 15,17 -#define X_MAX_PIN PE4 // ENDSTOPS 16,18 -#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 -#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 -#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 -#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 // // Steppers // -#define X_STEP_PIN PC6 -#define X_DIR_PIN PD13 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PA12 -#define Y_DIR_PIN PA11 -#define Y_ENABLE_PIN PA15 +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD3 -#define Z_ENABLE_PIN PB3 +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 // Extruder stepper pins // NOTE: Numbering here is made according to EXT connector numbers, @@ -86,46 +86,46 @@ // That is, E0_*_PIN are the E2_* lines connected to E2_A1 step // stick that drives the EXT0 output on the board. // -#define E0_STEP_PIN PC14 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PC15 +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 -#define E1_STEP_PIN PA0 -#define E1_DIR_PIN PB6 -#define E1_ENABLE_PIN PA1 +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 -#define E2_STEP_PIN PB2 -#define E2_DIR_PIN PB11 -#define E2_ENABLE_PIN PC4 +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 // // Heaters / Fans // -#define HEATER_0_PIN PB0 // EXT0 port -#define HEATER_1_PIN PB5 // EXT1 port -#define HEATER_2_PIN PB4 // EXT2 port -#define HEATER_BED_PIN PB1 // CON2X3 hotbed port +#define HEATER_0_PIN PB0 // EXT0 port +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port -#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan -#define FAN1_PIN PB8 // EXT1 port -#define FAN2_PIN PB7 // EXT2 port +//#define FAN_PIN PB9 // EXT0 port +#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port // // Temperature Sensors // -#define TEMP_0_PIN PC2 // EXT0 port -#define TEMP_1_PIN PC1 // EXT1 port -#define TEMP_2_PIN PC0 // EXT2 port -#define TEMP_BED_PIN PC3 // CON2X3 hotbed port +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port // // Misc. Functions // -#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector // // LCD / Controller @@ -138,19 +138,19 @@ // Geeetech's LCD2004A Control Panel is very much like // RepRapDiscount Smart Controller, but adds an FFC40 connector // - #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE PE14 // SID (MOSI) - #define LCD_PINS_D4 PD8 // SCK (CLK) clock - #define LCD_PINS_D5 PD9 - #define LCD_PINS_D6 PD10 - #define LCD_PINS_D7 PE15 + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 #else // // Serial LCDs can be implemented in ExtUI // - //#define LCD_UART_TX PD8 - //#define LCD_UART_RX PD9 + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 #endif #if HAS_GRAPHICAL_LCD @@ -167,9 +167,9 @@ // RepRapDiscount Smart Controller, but adds an FFC40 connector // connected with a flat wire to J2 connector on the board. // - #define BTN_EN1 PE8 - #define BTN_EN2 PE9 - #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 #define GTM32_PRO_VB_USE_LCD_BEEPER #define GTM32_PRO_VB_USE_EXT_SDCARD @@ -182,10 +182,10 @@ // This is pin 32 on J2 FFC40 and pin, goes to the beeper // on Geeetech's version of RepRapDiscount Smart Controller // (e.g. on Rostock 301) - #define BEEPER_PIN PE12 + #define BEEPER_PIN PE12 #else // This is the beeper on the board itself - #define BEEPER_PIN PB10 + #define BEEPER_PIN PB10 #endif /** @@ -203,28 +203,28 @@ // // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // - #define SS_PIN PC11 - #define SCK_PIN PC12 - #define MOSI_PIN PD2 - #define MISO_PIN PC8 - #define SD_DETECT_PIN PC7 + #define SS_PIN PC11 + #define SCK_PIN PC12 + #define MOSI_PIN PD2 + #define MISO_PIN PC8 + #define SD_DETECT_PIN PC7 #else // // Use the on-board card socket labeled TF_CARD_SOCKET // - #define SS_PIN PA4 - #define SCK_PIN PA5 - #define MOSI_PIN PA7 - #define MISO_PIN PA6 - #define SD_DETECT_PIN -1 // Card detect is not connected + #define SS_PIN PA4 + #define SCK_PIN PA5 + #define MOSI_PIN PA7 + #define MISO_PIN PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected #endif -#define SDSS SS_PIN +#define SDSS SS_PIN // // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 -#define ESP_WIFI_MODULE_RESET_PIN -1 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index e02b8b9377..24196ad892 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -53,32 +53,32 @@ // Enable EEPROM Emulation for this board as it doesn't have EEPROM #define FLASH_EEPROM_EMULATION -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB // // Limit Switches // -#define X_MIN_PIN PE5 // ENDSTOPS 15,17 -#define X_MAX_PIN PE4 // ENDSTOPS 16,18 -#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 -#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 -#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 -#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 +#define X_MIN_PIN PE5 // ENDSTOPS 15,17 +#define X_MAX_PIN PE4 // ENDSTOPS 16,18 +#define Y_MIN_PIN PE3 // ENDSTOPS 9,11 +#define Y_MAX_PIN PE2 // ENDSTOPS 10,12 +#define Z_MIN_PIN PE1 // ENDSTOPS 3,5 +#define Z_MAX_PIN PE0 // ENDSTOPS 4,6 // // Steppers // -#define X_STEP_PIN PC6 -#define X_DIR_PIN PD13 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PD13 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PA12 -#define Y_DIR_PIN PA11 -#define Y_ENABLE_PIN PA15 +#define Y_STEP_PIN PA12 +#define Y_DIR_PIN PA11 +#define Y_ENABLE_PIN PA15 -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD3 -#define Z_ENABLE_PIN PB3 +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PB3 // Extruder stepper pins // NOTE: Numbering here is made according to EXT connector numbers, @@ -86,46 +86,46 @@ // That is, E0_*_PIN are the E2_* lines connected to E2_A1 step // stick that drives the EXT0 output on the board. // -#define E0_STEP_PIN PC14 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PC15 +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 -#define E1_STEP_PIN PA0 -#define E1_DIR_PIN PB6 -#define E1_ENABLE_PIN PA1 +#define E1_STEP_PIN PA0 +#define E1_DIR_PIN PB6 +#define E1_ENABLE_PIN PA1 -#define E2_STEP_PIN PB2 -#define E2_DIR_PIN PB11 -#define E2_ENABLE_PIN PC4 +#define E2_STEP_PIN PB2 +#define E2_DIR_PIN PB11 +#define E2_ENABLE_PIN PC4 // // Heaters / Fans - INFO: Extruders ports are in reverse order. Pin numbers here differ from schematic. Original firmware assumes heater, fan and temp sensor on port EXT0 PB0, PB9, PC2. // -#define HEATER_0_PIN PB0 // EXT0 port. -#define HEATER_1_PIN PB5 // EXT1 port -#define HEATER_2_PIN PB4 // EXT2 port -#define HEATER_BED_PIN PB1 // CON2X3 hotbed port +#define HEATER_0_PIN PB0 // EXT0 port. +#define HEATER_1_PIN PB5 // EXT1 port +#define HEATER_2_PIN PB4 // EXT2 port +#define HEATER_BED_PIN PB1 // CON2X3 hotbed port // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port -#define FAN1_PIN PB8 // EXT1 port -#define FAN2_PIN PB7 // EXT2 port -#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan +//#define FAN_PIN PB9 // EXT0 port +#define FAN1_PIN PB8 // EXT1 port +#define FAN2_PIN PB7 // EXT2 port +#define ORIG_E0_AUTO_FAN_PIN PB9 // EXT0 port, used as main extruder fan // // Temperature Sensors // -#define TEMP_0_PIN PC2 // EXT0 port -#define TEMP_1_PIN PC1 // EXT1 port -#define TEMP_2_PIN PC0 // EXT2 port -#define TEMP_BED_PIN PC3 // CON2X3 hotbed port +#define TEMP_0_PIN PC2 // EXT0 port +#define TEMP_1_PIN PC1 // EXT1 port +#define TEMP_2_PIN PC0 // EXT2 port +#define TEMP_BED_PIN PC3 // CON2X3 hotbed port // // Misc. Functions // -#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector +#define LED_PWM PD12 // External LED, pin 2 on LED labeled connector // // LCD / Controller @@ -140,16 +140,16 @@ // RepRapDiscount Smart Controller, but adds an FFC40 connector // connected with a flat wire to J2 connector on the board. // - #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE PE14 // SID (MOSI) - #define LCD_PINS_D4 PD8 // SCK (CLK) clock - #define LCD_PINS_D5 PD9 - #define LCD_PINS_D6 PD10 - #define LCD_PINS_D7 PE15 + #define LCD_PINS_RS PE6 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE PE14 // SID (MOSI) + #define LCD_PINS_D4 PD8 // SCK (CLK) clock + #define LCD_PINS_D5 PD9 + #define LCD_PINS_D6 PD10 + #define LCD_PINS_D7 PE15 - #define BTN_EN1 PE8 - #define BTN_EN2 PE9 - #define BTN_ENC PE13 + #define BTN_EN1 PE8 + #define BTN_EN2 PE9 + #define BTN_ENC PE13 //#define GTM32_PRO_VB_USE_LCD_BEEPER #define GTM32_PRO_VB_USE_EXT_SDCARD @@ -158,19 +158,19 @@ // // Serial LCDs can be implemented in ExtUI // - //#define LCD_UART_TX PD8 - //#define LCD_UART_RX PD9 + //#define LCD_UART_TX PD8 + //#define LCD_UART_RX PD9 #endif #if HAS_GRAPHICAL_LCD #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(96) + #define ST7920_DELAY_1 DELAY_NS(96) #endif #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(48) + #define ST7920_DELAY_2 DELAY_NS(48) #endif #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(715) + #define ST7920_DELAY_3 DELAY_NS(715) #endif #endif @@ -183,10 +183,10 @@ // This is pin 32 on J2 FFC40 and pin, goes to the beeper // on Geeetech's version of RepRapDiscount Smart Controller // (e.g. on Rostock 301) - #define BEEPER_PIN PE12 + #define BEEPER_PIN PE12 #else // This is the beeper on the board itself - #define BEEPER_PIN PB10 + #define BEEPER_PIN PB10 #endif /** @@ -204,29 +204,29 @@ // // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // - #define SS_PIN PB12 // PC11 - #define SCK_PIN PB13 // PC12 // PC1 - #define MOSI_PIN PB15 // PD2 // PD2 - #define MISO_PIN PB14 // PC8 - #define SD_DETECT_PIN PC7 + #define SS_PIN PB12 // PC11 + #define SCK_PIN PB13 // PC12 // PC1 + #define MOSI_PIN PB15 // PD2 // PD2 + #define MISO_PIN PB14 // PC8 + #define SD_DETECT_PIN PC7 #else // // Use the on-board card socket labeled TF_CARD_SOCKET // - #define SS_PIN PA4 - #define SCK_PIN PA5 - #define MOSI_PIN PA7 - #define MISO_PIN PA6 // PA6 - #define SD_DETECT_PIN -1 // Card detect is not connected + #define SS_PIN PA4 + #define SCK_PIN PA5 + #define MOSI_PIN PA7 + #define MISO_PIN PA6 // PA6 + #define SD_DETECT_PIN -1 // Card detect is not connected #endif -#define SDSS SS_PIN +#define SDSS SS_PIN // // ESP WiFi can be soldered to J9 connector which is wired to USART2. // Must define WIFISUPPORT in Configuration.h for the printer. // -#define ESP_WIFI_MODULE_COM 2 -#define ESP_WIFI_MODULE_BAUDRATE 115200 -#define ESP_WIFI_MODULE_RESET_PIN -1 +#define ESP_WIFI_MODULE_COM 2 +#define ESP_WIFI_MODULE_BAUDRATE 115200 +#define ESP_WIFI_MODULE_RESET_PIN -1 diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h index 3849af3ae3..6395f6efc9 100644 --- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -42,10 +42,10 @@ // #define MCU_STM32F103ZE // not yet required // Enable EEPROM Emulation for this board, so that we don't overwrite factory data -//#define I2C_EEPROM // AT24C64 -//#define E2END 0x7FFF // 64KB +//#define I2C_EEPROM // AT24C64 +//#define E2END 0x7FFF // 64KB //#define FLASH_EEPROM_EMULATION -//#define E2END 0xFFF // 4KB +//#define E2END 0xFFF // 4KB //#define E2END uint32(EEPROM_START_ADDRESS + (EEPROM_PAGE_SIZE * 2) - 1) //#define EEPROM_CHITCHAT //#define DEBUG_EEPROM_READWRITE @@ -53,78 +53,78 @@ // // Limit Switches // -#define X_STOP_PIN PC6 -#define Y_STOP_PIN PG8 -#define Z_STOP_PIN PG7 -//#define X_MAX_PIN PC5 -//#define Y_MAX_PIN PC4 -//#define Z_MAX_PIN PB0 +#define X_STOP_PIN PC6 +#define Y_STOP_PIN PG8 +#define Z_STOP_PIN PG7 +//#define X_MAX_PIN PC5 +//#define Y_MAX_PIN PC4 +//#define Z_MAX_PIN PB0 // // Steppers // -#define X_STEP_PIN PD6 -#define X_DIR_PIN PD3 -#define X_ENABLE_PIN PG9 +#define X_STEP_PIN PD6 +#define X_DIR_PIN PD3 +#define X_ENABLE_PIN PG9 -#define Y_STEP_PIN PG12 -#define Y_DIR_PIN PG11 -#define Y_ENABLE_PIN PG13 +#define Y_STEP_PIN PG12 +#define Y_DIR_PIN PG11 +#define Y_ENABLE_PIN PG13 -#define Z_STEP_PIN PG15 -#define Z_DIR_PIN PG14 -#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PG15 +#define Z_DIR_PIN PG14 +#define Z_ENABLE_PIN PB8 -#define E0_STEP_PIN PE2 -#define E0_DIR_PIN PB9 -#define E0_ENABLE_PIN PE3 +#define E0_STEP_PIN PE2 +#define E0_DIR_PIN PB9 +#define E0_ENABLE_PIN PE3 -#define E1_STEP_PIN PE5 -#define E1_DIR_PIN PE4 -#define E1_ENABLE_PIN PE6 +#define E1_STEP_PIN PE5 +#define E1_DIR_PIN PE4 +#define E1_ENABLE_PIN PE6 // // Temperature Sensors // -#define TEMP_0_PIN PC2 -#define TEMP_BED_PIN PC1 +#define TEMP_0_PIN PC2 +#define TEMP_BED_PIN PC1 // // Heaters / Fans // -#define HEATER_0_PIN PA2 -#define HEATER_BED_PIN PA3 +#define HEATER_0_PIN PA2 +#define HEATER_BED_PIN PA3 -#define FAN_PIN PA1 +#define FAN_PIN PA1 -#define FIL_RUNOUT_PIN PC7 +#define FIL_RUNOUT_PIN PC7 // // LCD // -#define LCD_BACKLIGHT_PIN PF11 -#define FSMC_CS_PIN PD7 -#define FSMC_RS_PIN PG0 +#define LCD_BACKLIGHT_PIN PF11 +#define FSMC_CS_PIN PD7 +#define FSMC_RS_PIN PG0 -#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT -#define FSMC_DMA_DEV DMA2 -#define FSMC_DMA_CHANNEL DMA_CH5 +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 // // SD Card // -#define SD_DETECT_PIN PF10 +#define SD_DETECT_PIN PF10 // // Misc. // -#define BEEPER_PIN PC3 // use PB7 to shut up if desired -#define LED_PIN PC13 +#define BEEPER_PIN PC3 // use PB7 to shut up if desired +#define LED_PIN PC13 // // Touch support // #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PA4 - #define TOUCH_INT_PIN PC4 + #define TOUCH_CS_PIN PA4 + #define TOUCH_INT_PIN PC4 #endif diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index 66c5b55ecb..83881c128d 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -29,20 +29,20 @@ #endif #define BOARD_INFO_NAME "Longer3D" -#define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets) +#define ALFAWISE_UX0 // Common to all Longer3D STM32F1 boards (used for Open drain mosfets) -//#define DISABLE_DEBUG // We still want to debug with STLINK... -#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK - // Release PB4 (STEP_X_PIN) from JTAG NRST role. +//#define DISABLE_DEBUG // We still want to debug with STLINK... +#define DISABLE_JTAG // We free the jtag pins (PA15) but keep STLINK + // Release PB4 (STEP_X_PIN) from JTAG NRST role. // // Limit Switches // -#define X_MIN_PIN PC1 // pin 16 -#define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup) -#define Y_MIN_PIN PC15 // pin 9 -#define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup) -#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function -#define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup) +#define X_MIN_PIN PC1 // pin 16 +#define X_MAX_PIN PC0 // pin 15 (Filament sensor on Alfawise setup) +#define Y_MIN_PIN PC15 // pin 9 +#define Y_MAX_PIN PC14 // pin 8 (Unused in stock Alfawise setup) +#define Z_MIN_PIN PE6 // pin 5 Standard Endstop or Z_Probe endstop function +#define Z_MAX_PIN PE5 // pin 4 (Unused in stock Alfawise setup) // May be used for BLTouch Servo function on older variants (<= V08) #define ONBOARD_ENDSTOPPULLUPS @@ -50,60 +50,60 @@ // Filament Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true) + #define FIL_RUNOUT_PIN PC0 // XMAX plug on PCB used as filament runout sensor on Alfawise boards (inverting true) #endif // // Steppers // -#define X_ENABLE_PIN PB5 // pin 91 -#define X_STEP_PIN PB4 // pin 90 -#define X_DIR_PIN PB3 // pin 89 +#define X_ENABLE_PIN PB5 // pin 91 +#define X_STEP_PIN PB4 // pin 90 +#define X_DIR_PIN PB3 // pin 89 -#define Y_ENABLE_PIN PB8 // pin 95 -#define Y_STEP_PIN PB7 // pin 93 -#define Y_DIR_PIN PB6 // pin 92 +#define Y_ENABLE_PIN PB8 // pin 95 +#define Y_STEP_PIN PB7 // pin 93 +#define Y_DIR_PIN PB6 // pin 92 -#define Z_ENABLE_PIN PE1 // pin 98 -#define Z_STEP_PIN PE0 // pin 97 -#define Z_DIR_PIN PB9 // pin 96 +#define Z_ENABLE_PIN PE1 // pin 98 +#define Z_STEP_PIN PE0 // pin 97 +#define Z_DIR_PIN PB9 // pin 96 -#define E0_ENABLE_PIN PE4 // pin 3 -#define E0_STEP_PIN PE3 // pin 2 -#define E0_DIR_PIN PE2 // pin 1 +#define E0_ENABLE_PIN PE4 // pin 3 +#define E0_STEP_PIN PE3 // pin 2 +#define E0_DIR_PIN PE2 // pin 1 // // Temperature Sensors // -#define TEMP_0_PIN PA0 // pin 23 (Nozzle 100K/3950 thermistor) -#define TEMP_BED_PIN PA1 // pin 24 (Hot Bed 100K/3950 thermistor) +#define TEMP_0_PIN PA0 // pin 23 (Nozzle 100K/3950 thermistor) +#define TEMP_BED_PIN PA1 // pin 24 (Hot Bed 100K/3950 thermistor) // // Heaters / Fans // -#define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet) -#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet) +#define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet) +#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet) -#define FAN_PIN PA15 // pin 77 (4cm Fan) -#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink -#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range -#define FAN_MAX_PWM 255 +#define FAN_PIN PA15 // pin 77 (4cm Fan) +#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink +#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range +#define FAN_MAX_PWM 255 -//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor +//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor // Can drive a PC Buzzer, if connected between PWM and 5V pins -#define LED_PIN PC2 // pin 17 +#define LED_PIN PC2 // pin 17 // // PWM for a servo probe // Other servo devices are not supported on this board! // #if HAS_Z_SERVO_PROBE - #define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V) - #define SERVO0_PWM_OD // Comment this if using PE5 + #define SERVO0_PIN PD13 // Open drain PWM pin on the V0G (GND or floating 5V) + #define SERVO0_PWM_OD // Comment this if using PE5 - //#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0) - //#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5) + //#define SERVO0_PIN PE5 // Pulled up PWM pin on the V08 (3.3V or 0) + //#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5) #endif /** @@ -118,17 +118,17 @@ * because Marlin uses the reset as a failsafe to revive a glitchy LCD. */ -#define LCD_RESET_PIN PC4 // pin 33 -#define LCD_BACKLIGHT_PIN PD12 // pin 59 -#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1 -#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed +#define LCD_RESET_PIN PC4 // pin 33 +#define LCD_BACKLIGHT_PIN PD12 // pin 59 +#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1 +#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed -#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT -#define FSMC_DMA_DEV DMA2 -#define FSMC_DMA_CHANNEL DMA_CH5 +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 -#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h -#define DOGLCD_SCK -1 +#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h +#define DOGLCD_SCK -1 /** * Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer @@ -136,11 +136,11 @@ * declared below. */ #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PB12 // pin 51 SPI2_NSS - #define TOUCH_SCK_PIN PB13 // pin 52 - #define TOUCH_MOSI_PIN PB14 // pin 53 - #define TOUCH_MISO_PIN PB15 // pin 54 - #define TOUCH_INT_PIN PC6 // pin 63 (PenIRQ coming from ADS7843) + #define TOUCH_CS_PIN PB12 // pin 51 SPI2_NSS + #define TOUCH_SCK_PIN PB13 // pin 52 + #define TOUCH_MOSI_PIN PB14 // pin 53 + #define TOUCH_MISO_PIN PB15 // pin 54 + #define TOUCH_INT_PIN PC6 // pin 63 (PenIRQ coming from ADS7843) #endif // @@ -153,12 +153,12 @@ #undef E2END #if ENABLED(SPI_EEPROM) // SPI1 EEPROM Winbond W25Q64 (8MB/64Mbits) - #define SPI_CHAN_EEPROM1 1 - #define SPI_EEPROM1_CS PC5 // pin 34 - #define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 - #define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 - #define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32 - #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) + #define SPI_CHAN_EEPROM1 1 + #define SPI_EEPROM1_CS PC5 // pin 34 + #define EEPROM_SCK BOARD_SPI1_SCK_PIN // PA5 pin 30 + #define EEPROM_MISO BOARD_SPI1_MISO_PIN // PA6 pin 31 + #define EEPROM_MOSI BOARD_SPI1_MOSI_PIN // PA7 pin 32 + #define EEPROM_PAGE_SIZE 0x1000U // 4KB (from datasheet) #define E2END ((16 * EEPROM_PAGE_SIZE)-1) // Limit to 64KB for now... #elif ENABLED(FLASH_EEPROM_EMULATION) // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) diff --git a/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h index 624c59ebea..9829018d8d 100644 --- a/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h +++ b/Marlin/src/pins/stm32f1/pins_MALYAN_M200.h @@ -36,7 +36,7 @@ // but it is literally the only board which uses it. #define FLASH_EEPROM_EMULATION -#define SDSS SS_PIN +#define SDSS SS_PIN // Based on PWM timer usage, we have to use these timers and soft PWM for the fans // On STM32F103: @@ -50,43 +50,43 @@ // // Limit Switches // -#define X_MIN_PIN PB4 -#define Y_MIN_PIN PA15 -#define Z_MIN_PIN PB5 +#define X_MIN_PIN PB4 +#define Y_MIN_PIN PA15 +#define Z_MIN_PIN PB5 // // Steppers // // X & Y enable are the same -#define X_STEP_PIN PB14 -#define X_DIR_PIN PB15 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PB14 +#define X_DIR_PIN PB15 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PB12 -#define Y_DIR_PIN PB13 -#define Y_ENABLE_PIN PA8 +#define Y_STEP_PIN PB12 +#define Y_DIR_PIN PB13 +#define Y_ENABLE_PIN PA8 -#define Z_STEP_PIN PB10 -#define Z_DIR_PIN PB2 -#define Z_ENABLE_PIN PB11 +#define Z_STEP_PIN PB10 +#define Z_DIR_PIN PB2 +#define Z_ENABLE_PIN PB11 -#define E0_STEP_PIN PB0 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PB1 +#define E0_STEP_PIN PB0 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PB1 // // Temperature Sensors // -#define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor) -#define TEMP_BED_PIN PA1 // Analog Input (BED thermistor) +#define TEMP_0_PIN PA0 // Analog Input (HOTEND0 thermistor) +#define TEMP_BED_PIN PA1 // Analog Input (BED thermistor) // // Heaters / Fans // -#define HEATER_0_PIN PB6 // HOTEND0 MOSFET -#define HEATER_BED_PIN PB7 // BED MOSFET +#define HEATER_0_PIN PB6 // HOTEND0 MOSFET +#define HEATER_BED_PIN PB7 // BED MOSFET -#define MALYAN_FAN1_PIN PB8 // FAN1 header on board - PRINT FAN -#define MALYAN_FAN2_PIN PB3 // FAN2 header on board - CONTROLLER FAN +#define MALYAN_FAN1_PIN PB8 // FAN1 header on board - PRINT FAN +#define MALYAN_FAN2_PIN PB3 // FAN2 header on board - CONTROLLER FAN -#define FAN1_PIN MALYAN_FAN2_PIN +#define FAN1_PIN MALYAN_FAN2_PIN diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index 3b10bae139..db35548e88 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -43,72 +43,72 @@ // // Servos // -#define SERVO0_PIN PC3 // XS1 - 5 -#define SERVO1_PIN PA1 // XS1 - 6 -#define SERVO2_PIN PF9 // XS2 - 5 -#define SERVO3_PIN PF8 // XS2 - 6 +#define SERVO0_PIN PC3 // XS1 - 5 +#define SERVO1_PIN PA1 // XS1 - 6 +#define SERVO2_PIN PF9 // XS2 - 5 +#define SERVO3_PIN PF8 // XS2 - 6 // // Limit Switches // -#define X_MIN_PIN PB12 -#define X_MAX_PIN PB0 -#define Y_MIN_PIN PC5 -#define Y_MAX_PIN PC4 -#define Z_MIN_PIN PA4 -#define Z_MAX_PIN PF7 +#define X_MIN_PIN PB12 +#define X_MAX_PIN PB0 +#define Y_MIN_PIN PC5 +#define Y_MAX_PIN PC4 +#define Z_MIN_PIN PA4 +#define Z_MAX_PIN PF7 // // Steppers // -#define X_ENABLE_PIN PB9 -#define X_STEP_PIN PB8 -#define X_DIR_PIN PB5 +#define X_ENABLE_PIN PB9 +#define X_STEP_PIN PB8 +#define X_DIR_PIN PB5 -#define Y_ENABLE_PIN PB4 -#define Y_STEP_PIN PG15 -#define Y_DIR_PIN PG10 +#define Y_ENABLE_PIN PB4 +#define Y_STEP_PIN PG15 +#define Y_DIR_PIN PG10 -#define Z_ENABLE_PIN PD7 -#define Z_STEP_PIN PD3 -#define Z_DIR_PIN PG14 +#define Z_ENABLE_PIN PD7 +#define Z_STEP_PIN PD3 +#define Z_DIR_PIN PG14 -#define E0_ENABLE_PIN PG13 -#define E0_STEP_PIN PG8 -#define E0_DIR_PIN PA15 +#define E0_ENABLE_PIN PG13 +#define E0_STEP_PIN PG8 +#define E0_DIR_PIN PA15 -#define E1_ENABLE_PIN PA12 -#define E1_STEP_PIN PA11 -#define E1_DIR_PIN PA8 +#define E1_ENABLE_PIN PA12 +#define E1_STEP_PIN PA11 +#define E1_DIR_PIN PA8 // // Temperature Sensors // -#define TEMP_0_PIN PC1 // TH1 -#define TEMP_1_PIN PC2 // TH2 -#define TEMP_BED_PIN PC0 // TB1 +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_BED_PIN PC0 // TB1 // // Heaters / Fans // -#define HEATER_0_PIN PC7 // HEATER1 -#define HEATER_1_PIN PA6 // HEATER2 -#define HEATER_BED_PIN PC6 // HOT BED +#define HEATER_0_PIN PC7 // HEATER1 +#define HEATER_1_PIN PA6 // HEATER2 +#define HEATER_BED_PIN PC6 // HOT BED -#define FAN_PIN PA7 // FAN +#define FAN_PIN PA7 // FAN /** * Note: MKS Robin board is using SPI2 interface. Make sure your stm32duino library is configured accordingly */ -//#define MAX6675_SS_PIN PE5 // TC1 - CS1 -//#define MAX6675_SS_PIN PE6 // TC2 - CS2 +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 -#define POWER_LOSS_PIN PA2 // PW_DET -#define PS_ON_PIN PA3 // PW_OFF -#define FIL_RUNOUT_PIN PF11 // MT_DET +#define POWER_LOSS_PIN PA2 // PW_DET +#define PS_ON_PIN PA3 // PW_OFF +#define FIL_RUNOUT_PIN PF11 // MT_DET -#define BEEPER_PIN PC13 -#define LED_PIN PB2 +#define BEEPER_PIN PC13 +#define LED_PIN PB2 /** * Note: MKS Robin TFT screens use various TFT controllers @@ -122,38 +122,38 @@ * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu * because Marlin uses the reset as a failsafe to revive a glitchy LCD. */ -//#define LCD_RESET_PIN PF6 -#define LCD_BACKLIGHT_PIN PG11 -#define FSMC_CS_PIN PG12 // NE4 -#define FSMC_RS_PIN PF0 // A0 +//#define LCD_RESET_PIN PF6 +#define LCD_BACKLIGHT_PIN PG11 +#define FSMC_CS_PIN PG12 // NE4 +#define FSMC_RS_PIN PF0 // A0 -#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT -#define FSMC_DMA_DEV DMA2 -#define FSMC_DMA_CHANNEL DMA_CH5 +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT +#define FSMC_DMA_DEV DMA2 +#define FSMC_DMA_CHANNEL DMA_CH5 #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PB1 // SPI2_NSS - #define TOUCH_SCK_PIN PB13 // SPI2_SCK - #define TOUCH_MISO_PIN PB14 // SPI2_MISO - #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI + #define TOUCH_CS_PIN PB1 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 // SPI2_SCK + #define TOUCH_MISO_PIN PB14 // SPI2_MISO + #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI #endif // SPI1(PA7) & SPI3(PB5) not available #define ENABLE_SPI2 #if ENABLED(SDIO_SUPPORT) - #define SCK_PIN PB13 // SPI2 - #define MISO_PIN PB14 // SPI2 - #define MOSI_PIN PB15 // SPI2 - #define SS_PIN -1 // PB12 is X- - #define SD_DETECT_PIN PF12 // SD_CD + #define SCK_PIN PB13 // SPI2 + #define MISO_PIN PB14 // SPI2 + #define MOSI_PIN PB15 // SPI2 + #define SS_PIN -1 // PB12 is X- + #define SD_DETECT_PIN PF12 // SD_CD #else // SD as custom software SPI (SDIO pins) - #define SCK_PIN PC12 - #define MISO_PIN PC8 - #define MOSI_PIN PD2 - #define SS_PIN -1 - #define ONBOARD_SD_CS_PIN PC11 - #define SDSS PD2 - #define SD_DETECT_PIN -1 + #define SCK_PIN PC12 + #define MISO_PIN PC8 + #define MOSI_PIN PD2 + #define SS_PIN -1 + #define ONBOARD_SD_CS_PIN PC11 + #define SDSS PD2 + #define SD_DETECT_PIN -1 #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index 1a7d664899..4c10a310bf 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -39,74 +39,74 @@ // // Limit Switches // -#define X_STOP_PIN PC13 -#define Y_STOP_PIN PC0 -#define Z_MIN_PIN PC12 -#define Z_MAX_PIN PB9 +#define X_STOP_PIN PC13 +#define Y_STOP_PIN PC0 +#define Z_MIN_PIN PC12 +#define Z_MAX_PIN PB9 // // Steppers // -#define X_STEP_PIN PC6 -#define X_DIR_PIN PB12 -#define X_ENABLE_PIN PB10 +#define X_STEP_PIN PC6 +#define X_DIR_PIN PB12 +#define X_ENABLE_PIN PB10 -#define Y_STEP_PIN PB11 -#define Y_DIR_PIN PB2 -#define Y_ENABLE_PIN PB10 +#define Y_STEP_PIN PB11 +#define Y_DIR_PIN PB2 +#define Y_ENABLE_PIN PB10 -#define Z_STEP_PIN PB1 -#define Z_DIR_PIN PC5 -#define Z_ENABLE_PIN PB10 +#define Z_STEP_PIN PB1 +#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PB10 -#define E0_STEP_PIN PC4 -#define E0_DIR_PIN PA5 -#define E0_ENABLE_PIN PA4 +#define E0_STEP_PIN PC4 +#define E0_DIR_PIN PA5 +#define E0_ENABLE_PIN PA4 // // Heaters / Fans // -#define HEATER_0_PIN PC9 -#define FAN_PIN PA8 -#define HEATER_BED_PIN PC8 +#define HEATER_0_PIN PC9 +#define FAN_PIN PA8 +#define HEATER_BED_PIN PC8 // // Temperature Sensors // -#define TEMP_BED_PIN PA1 -#define TEMP_0_PIN PA0 +#define TEMP_BED_PIN PA1 +#define TEMP_0_PIN PA0 -#define FIL_RUNOUT_PIN PB8 // MT_DET +#define FIL_RUNOUT_PIN PB8 // MT_DET // // LCD Pins // #if HAS_SPI_LCD - #define BEEPER_PIN PD2 - #define BTN_ENC PB3 - #define LCD_PINS_RS PC3 + #define BEEPER_PIN PD2 + #define BTN_ENC PB3 + #define LCD_PINS_RS PC3 - #define BTN_EN1 PB5 - #define BTN_EN2 PB4 + #define BTN_EN1 PB5 + #define BTN_EN2 PB4 - #define LCD_PINS_ENABLE PC2 + #define LCD_PINS_ENABLE PC2 #if ENABLED(MKS_MINI_12864) - #define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN -1 - #define DOGLCD_A0 PC1 - #define DOGLCD_CS PC2 - #define DOGLCD_SCK PB13 - #define DOGLCD_MOSI PB15 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PC1 + #define DOGLCD_CS PC2 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 - #else // !MKS_MINI_12864 + #else // !MKS_MINI_12864 - #define LCD_PINS_D4 PC1 + #define LCD_PINS_D4 PC1 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 -1 - #define LCD_PINS_D6 -1 - #define LCD_PINS_D7 -1 + #define LCD_PINS_D5 -1 + #define LCD_PINS_D6 -1 + #define LCD_PINS_D7 -1 #endif #endif // !MKS_MINI_12864 @@ -114,9 +114,9 @@ #endif // HAS_SPI_LCD // Motor current PWM pins -#define MOTOR_CURRENT_PWM_XY_PIN PB0 -#define MOTOR_CURRENT_PWM_Z_PIN PA7 -#define MOTOR_CURRENT_PWM_E_PIN PA6 +#define MOTOR_CURRENT_PWM_XY_PIN PB0 +#define MOTOR_CURRENT_PWM_Z_PIN PA7 +#define MOTOR_CURRENT_PWM_E_PIN PA6 #define MOTOR_CURRENT_PWM_RANGE (65535/10/3.3) // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp #define DEFAULT_PWM_MOTOR_CURRENT { 1000, 1000, 1000 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically. @@ -124,11 +124,11 @@ // SD Card // #define ENABLE_SPI2 -#define SD_DETECT_PIN PC10 -#define SCK_PIN PB13 -#define MISO_PIN P1B4 -#define MOSI_PIN P1B5 -#define SS_PIN PA15 +#define SD_DETECT_PIN PC10 +#define SCK_PIN PB13 +#define MISO_PIN P1B4 +#define MOSI_PIN P1B5 +#define SS_PIN PA15 #if HAS_GRAPHICAL_LCD #define BOARD_ST7920_DELAY_1 DELAY_NS(125) diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h index 9a404ec64d..466bdecc81 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -43,89 +43,89 @@ // // Servos // -#define SERVO0_PIN PA3 +#define SERVO0_PIN PA3 // // Limit Switches // -#define X_STOP_PIN PA12 -#define Y_STOP_PIN PA11 -#define Z_MIN_PIN PC6 -#define Z_MAX_PIN PB1 +#define X_STOP_PIN PA12 +#define Y_STOP_PIN PA11 +#define Z_MIN_PIN PC6 +#define Z_MAX_PIN PB1 // // Steppers // -#define X_STEP_PIN PC0 -#define X_DIR_PIN PB2 -#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PC0 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PC13 -#define Y_STEP_PIN PC2 -#define Y_DIR_PIN PB9 -#define Y_ENABLE_PIN PB12 +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PB12 -#define Z_STEP_PIN PB7 -#define Z_DIR_PIN PB6 -#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB7 +#define Z_DIR_PIN PB6 +#define Z_ENABLE_PIN PB8 -#define E0_STEP_PIN PB4 -#define E0_DIR_PIN PB3 -#define E0_ENABLE_PIN PB5 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB3 +#define E0_ENABLE_PIN PB5 -#define E1_STEP_PIN PC12 -#define E1_DIR_PIN PC11 -#define E1_ENABLE_PIN PD2 +#define E1_STEP_PIN PC12 +#define E1_DIR_PIN PC11 +#define E1_ENABLE_PIN PD2 // // Heaters 0,1 / Fans / Bed // -#define HEATER_0_PIN PC9 -#define HEATER_1_PIN PC7 -#define FAN_PIN PA8 -#define HEATER_BED_PIN PC8 +#define HEATER_0_PIN PC9 +#define HEATER_1_PIN PC7 +#define FAN_PIN PA8 +#define HEATER_BED_PIN PC8 // // Temperature Sensors // -#define TEMP_BED_PIN PA1 //TB -#define TEMP_0_PIN PA0 //TH1 -#define TEMP_1_PIN PA2 //TH2 +#define TEMP_BED_PIN PA1 //TB +#define TEMP_0_PIN PA0 //TH1 +#define TEMP_1_PIN PA2 //TH2 -#define FIL_RUNOUT_PIN PB10 // MT_DET +#define FIL_RUNOUT_PIN PB10 // MT_DET // // LCD Pins // #if HAS_SPI_LCD - #define BEEPER_PIN PC1 - #define BTN_ENC PC3 - #define LCD_PINS_ENABLE PA4 - #define LCD_PINS_RS PA5 - #define BTN_EN1 PB11 - #define BTN_EN2 PB0 + #define BEEPER_PIN PC1 + #define BTN_ENC PC3 + #define LCD_PINS_ENABLE PA4 + #define LCD_PINS_RS PA5 + #define BTN_EN1 PB11 + #define BTN_EN2 PB0 // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor) #if ENABLED(MKS_MINI_12864) - #define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN -1 - #define DOGLCD_A0 PC4 - #define DOGLCD_CS PA7 - #define DOGLCD_SCK PB13 - #define DOGLCD_MOSI PB15 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PC4 + #define DOGLCD_CS PA7 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 // Required for MKS_MINI_12864 with this board #define MKS_LCD12864B #undef SHOW_BOOTSCREEN - #else // !MKS_MINI_12864 + #else // !MKS_MINI_12864 - #define LCD_PINS_D4 PA6 + #define LCD_PINS_D4 PA6 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PA7 - #define LCD_PINS_D6 PC4 - #define LCD_PINS_D7 PC5 + #define LCD_PINS_D5 PA7 + #define LCD_PINS_D6 PC4 + #define LCD_PINS_D7 PC5 #endif #endif // !MKS_MINI_12864 @@ -136,18 +136,18 @@ // SD Card // #define ENABLE_SPI2 -#define SD_DETECT_PIN PC10 -#define SCK_PIN PB13 -#define MISO_PIN PB14 -#define MOSI_PIN PB15 -#define SS_PIN PA15 +#define SD_DETECT_PIN PC10 +#define SCK_PIN PB13 +#define MISO_PIN PB14 +#define MOSI_PIN PB15 +#define SS_PIN PA15 #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(125) + #define ST7920_DELAY_1 DELAY_NS(125) #endif #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(125) + #define ST7920_DELAY_2 DELAY_NS(125) #endif #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(125) + #define ST7920_DELAY_3 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index 16e74b169e..50babad274 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -52,67 +52,67 @@ // // Limit Switches // -#define X_STOP_PIN PA15 -#define Y_STOP_PIN PA12 -#define Z_MIN_PIN PA11 -#define Z_MAX_PIN PC4 +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA4 // MT_DET + #define FIL_RUNOUT_PIN PA4 // MT_DET #endif // // Steppers // -#define X_ENABLE_PIN PE4 -#define X_STEP_PIN PE3 -#define X_DIR_PIN PE2 +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 -#define Y_ENABLE_PIN PE1 -#define Y_STEP_PIN PE0 -#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 -#define Z_ENABLE_PIN PB8 -#define Z_STEP_PIN PB5 -#define Z_DIR_PIN PB4 +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 -#define E0_ENABLE_PIN PB3 -#define E0_STEP_PIN PD6 -#define E0_DIR_PIN PD3 +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 // // Temperature Sensors // -#define TEMP_0_PIN PC1 // TH1 -#define TEMP_BED_PIN PC0 // TB1 +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_BED_PIN PC0 // TB1 // // Heaters / Fans // -#define HEATER_0_PIN PC3 // HEATER1 -#define HEATER_BED_PIN PA0 // HOT BED +#define HEATER_0_PIN PC3 // HEATER1 +#define HEATER_BED_PIN PA0 // HOT BED -#define FAN_PIN PB1 // FAN +#define FAN_PIN PB1 // FAN // // Thermocouples // -//#define MAX6675_SS_PIN PE5 // TC1 - CS1 -//#define MAX6675_SS_PIN PE6 // TC2 - CS2 +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 // // Misc. Functions // -#define POWER_LOSS_PIN PA2 // PW_DET -#define PS_ON_PIN PA3 // PW_OFF +#define POWER_LOSS_PIN PA2 // PW_DET +#define PS_ON_PIN PA3 // PW_OFF -//#define LED_PIN PB2 +//#define LED_PIN PB2 // // LCD / Controller // -#define BEEPER_PIN PC5 -#define SD_DETECT_PIN PD12 +#define BEEPER_PIN PC5 +#define SD_DETECT_PIN PD12 /** * Note: MKS Robin TFT screens use various TFT controllers. @@ -120,27 +120,27 @@ * to let the bootloader init the screen. */ #if ENABLED(FSMC_GRAPHICAL_TFT) - #define FSMC_CS_PIN PD7 // NE4 - #define FSMC_RS_PIN PD11 // A0 + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 - #define LCD_RESET_PIN PC6 - #define NO_LCD_REINIT // Suppress LCD re-initialization + #define LCD_RESET_PIN PC6 + #define NO_LCD_REINIT // Suppress LCD re-initialization - #define LCD_BACKLIGHT_PIN PD13 + #define LCD_BACKLIGHT_PIN PD13 #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PC2 - #define TOUCH_SCK_PIN PB13 - #define TOUCH_MOSI_PIN PB15 - #define TOUCH_MISO_PIN PB14 + #define TOUCH_CS_PIN PC2 + #define TOUCH_SCK_PIN PB13 + #define TOUCH_MOSI_PIN PB15 + #define TOUCH_MISO_PIN PB14 #endif #endif // Motor current PWM pins -#define MOTOR_CURRENT_PWM_XY_PIN PA6 -#define MOTOR_CURRENT_PWM_Z_PIN PA7 -#define MOTOR_CURRENT_PWM_E_PIN PB0 -#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp +#define MOTOR_CURRENT_PWM_XY_PIN PA6 +#define MOTOR_CURRENT_PWM_Z_PIN PA7 +#define MOTOR_CURRENT_PWM_E_PIN PB0 +#define MOTOR_CURRENT_PWM_RANGE 1500 // (255 * (1000mA / 65535)) * 257 = 1000 is equal 1.6v Vref in turn equal 1Amp #define DEFAULT_PWM_MOTOR_CURRENT { 1030, 1030, 1030 } // 1.05Amp per driver, here is XY, Z and E. This values determined empirically. // This is a kind of workaround in case native marlin "digipot" interface won't work. @@ -149,6 +149,6 @@ // #define MKS_ROBIN_MINI_VREF_PWM //#endif -//#define VREF_XY_PIN PA6 -//#define VREF_Z_PIN PA7 -//#define VREF_E1_PIN PB0 +//#define VREF_XY_PIN PA6 +//#define VREF_Z_PIN PA7 +//#define VREF_E1_PIN PB0 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h index 223f520ebe..ae9118e6d0 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -41,78 +41,78 @@ // // Limit Switches // -#define X_STOP_PIN PA15 -#define Y_STOP_PIN PA12 -#define Z_MIN_PIN PA11 -#define Z_MAX_PIN PC4 +#define X_STOP_PIN PA15 +#define Y_STOP_PIN PA12 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA4 // MT_DET + #define FIL_RUNOUT_PIN PA4 // MT_DET #endif // // Steppers // -#define X_ENABLE_PIN PE4 -#define X_STEP_PIN PE3 -#define X_DIR_PIN PE2 +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 -#define Y_ENABLE_PIN PE1 -#define Y_STEP_PIN PE0 -#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 -#define Z_ENABLE_PIN PB8 -#define Z_STEP_PIN PB5 -#define Z_DIR_PIN PB4 +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 -#define E0_ENABLE_PIN PB3 -#define E0_STEP_PIN PD6 -#define E0_DIR_PIN PD3 +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 -#define E1_ENABLE_PIN PA3 -#define E1_STEP_PIN PA6 -#define E1_DIR_PIN PA1 +#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PA6 +#define E1_DIR_PIN PA1 // // Temperature Sensors // -#define TEMP_0_PIN PC1 // TH1 -#define TEMP_1_PIN PC2 // TH2 -#define TEMP_BED_PIN PC0 // TB1 +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_BED_PIN PC0 // TB1 // // Heaters / Fans // -#define HEATER_0_PIN PC3 // HEATER1 -#define HEATER_1_PIN PB0 // HEATER2 -#define HEATER_BED_PIN PA0 // HOT BED +#define HEATER_0_PIN PC3 // HEATER1 +#define HEATER_1_PIN PB0 // HEATER2 +#define HEATER_BED_PIN PA0 // HOT BED -#define FAN_PIN PB1 // FAN +#define FAN_PIN PB1 // FAN // // Thermocouples // -//#define MAX6675_SS_PIN PE5 // TC1 - CS1 -//#define MAX6675_SS_PIN PE6 // TC2 - CS2 +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PE6 // TC2 - CS2 // // Misc. Functions // -#define POWER_LOSS_PIN PA2 // PW_DET -#define PS_ON_PIN PA3 // PW_OFF +#define POWER_LOSS_PIN PA2 // PW_DET +#define PS_ON_PIN PA3 // PW_OFF -#define LED_PIN PB2 +#define LED_PIN PB2 // // SD Card // #define SDIO_SUPPORT -#define SD_DETECT_PIN PD12 +#define SD_DETECT_PIN PD12 // // LCD / Controller // -#define BEEPER_PIN PC5 +#define BEEPER_PIN PC5 /** * Note: MKS Robin TFT screens use various TFT controllers. @@ -120,18 +120,18 @@ * to let the bootloader init the screen. */ #if ENABLED(FSMC_GRAPHICAL_TFT) - #define FSMC_CS_PIN PD7 // NE4 - #define FSMC_RS_PIN PD11 // A0 + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 - #define LCD_RESET_PIN PC6 // FSMC_RST - #define NO_LCD_REINIT // Suppress LCD re-initialization + #define LCD_RESET_PIN PC6 // FSMC_RST + #define NO_LCD_REINIT // Suppress LCD re-initialization - #define LCD_BACKLIGHT_PIN PD13 + #define LCD_BACKLIGHT_PIN PD13 #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PA7 // SPI2_NSS - #define TOUCH_SCK_PIN PB13 // SPI2_SCK - #define TOUCH_MISO_PIN PB14 // SPI2_MISO - #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI + #define TOUCH_CS_PIN PA7 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 // SPI2_SCK + #define TOUCH_MISO_PIN PB14 // SPI2_MISO + #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 9090fb34c4..b42856721d 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -47,74 +47,74 @@ // // Servos // -#define SERVO0_PIN PA8 // BLTOUCH +#define SERVO0_PIN PA8 // BLTOUCH // // Limit Switches // -#define X_MIN_PIN PA15 -#define X_MAX_PIN PG7 -#define Y_MIN_PIN PA12 -#define Y_MAX_PIN PG8 -#define Z_MIN_PIN PA11 -#define Z_MAX_PIN PC4 +#define X_MIN_PIN PA15 +#define X_MAX_PIN PG7 +#define Y_MIN_PIN PA12 +#define Y_MAX_PIN PG8 +#define Z_MIN_PIN PA11 +#define Z_MAX_PIN PC4 // // Steppers // -#define X_ENABLE_PIN PE4 -#define X_STEP_PIN PE3 -#define X_DIR_PIN PE2 +#define X_ENABLE_PIN PE4 +#define X_STEP_PIN PE3 +#define X_DIR_PIN PE2 #ifndef X_CS_PIN - #define X_CS_PIN PF8 + #define X_CS_PIN PF8 #endif -#define Y_ENABLE_PIN PE1 -#define Y_STEP_PIN PE0 -#define Y_DIR_PIN PB9 +#define Y_ENABLE_PIN PE1 +#define Y_STEP_PIN PE0 +#define Y_DIR_PIN PB9 #ifndef Y_CS_PIN - #define Y_CS_PIN PF3 + #define Y_CS_PIN PF3 #endif -#define Z_ENABLE_PIN PB8 -#define Z_STEP_PIN PB5 -#define Z_DIR_PIN PB4 +#define Z_ENABLE_PIN PB8 +#define Z_STEP_PIN PB5 +#define Z_DIR_PIN PB4 #ifndef Z_CS_PIN - #define Z_CS_PIN PF6 + #define Z_CS_PIN PF6 #endif -#define E0_ENABLE_PIN PB3 -#define E0_STEP_PIN PD6 -#define E0_DIR_PIN PD3 +#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PD6 +#define E0_DIR_PIN PD3 #ifndef E0_CS_PIN - #define E0_CS_PIN PG15 + #define E0_CS_PIN PG15 #endif -#define E1_ENABLE_PIN PA3 -#define E1_STEP_PIN PA6 -#define E1_DIR_PIN PA1 +#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PA6 +#define E1_DIR_PIN PA1 #ifndef E1_CS_PIN - #define E1_CS_PIN PG10 + #define E1_CS_PIN PG10 #endif -#define E2_ENABLE_PIN PF0 -#define E2_STEP_PIN PF2 -#define E2_DIR_PIN PF1 +#define E2_ENABLE_PIN PF0 +#define E2_STEP_PIN PF2 +#define E2_DIR_PIN PF1 #ifndef E2_CS_PIN - #define E2_CS_PIN PG9 + #define E2_CS_PIN PG9 #endif // // Software SPI pins for TMC2130 stepper drivers // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PB15 + #define TMC_SW_MOSI PB15 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PB14 + #define TMC_SW_MISO PB14 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PB13 + #define TMC_SW_SCK PB13 #endif #endif @@ -140,71 +140,71 @@ // // Software serial // - #define X_SERIAL_TX_PIN PF7 - #define X_SERIAL_RX_PIN PF8 + #define X_SERIAL_TX_PIN PF7 + #define X_SERIAL_RX_PIN PF8 - #define Y_SERIAL_TX_PIN PF4 - #define Y_SERIAL_RX_PIN PF3 + #define Y_SERIAL_TX_PIN PF4 + #define Y_SERIAL_RX_PIN PF3 - #define Z_SERIAL_TX_PIN PF5 - #define Z_SERIAL_RX_PIN PF6 + #define Z_SERIAL_TX_PIN PF5 + #define Z_SERIAL_RX_PIN PF6 - #define E0_SERIAL_TX_PIN PG13 - #define E0_SERIAL_RX_PIN PG15 + #define E0_SERIAL_TX_PIN PG13 + #define E0_SERIAL_RX_PIN PG15 - #define E1_SERIAL_TX_PIN PG12 - #define E1_SERIAL_RX_PIN PG10 + #define E1_SERIAL_TX_PIN PG12 + #define E1_SERIAL_RX_PIN PG10 - #define E2_SERIAL_TX_PIN PC13 - #define E2_SERIAL_RX_PIN PG9 + #define E2_SERIAL_TX_PIN PC13 + #define E2_SERIAL_RX_PIN PG9 #endif // // Temperature Sensors // -#define TEMP_0_PIN PC1 // TH1 -#define TEMP_1_PIN PC2 // TH2 -#define TEMP_2_PIN PC3 // TH3 -#define TEMP_BED_PIN PC0 // TB1 +#define TEMP_0_PIN PC1 // TH1 +#define TEMP_1_PIN PC2 // TH2 +#define TEMP_2_PIN PC3 // TH3 +#define TEMP_BED_PIN PC0 // TB1 // // Heaters / Fans // -#define HEATER_0_PIN PF10 // +HE0- -#define HEATER_1_PIN PB0 // +HE1- -#define HEATER_2_PIN PF9 // +HE2- -#define HEATER_BED_PIN PA0 // +HOT-BED- -#define FAN_PIN PB1 // +FAN- +#define HEATER_0_PIN PF10 // +HE0- +#define HEATER_1_PIN PB0 // +HE1- +#define HEATER_2_PIN PF9 // +HE2- +#define HEATER_BED_PIN PA0 // +HOT-BED- +#define FAN_PIN PB1 // +FAN- /** * Note: MKS Robin Pro board is using SPI2 interface. Make sure your stm32duino library is configured accordingly */ -//#define MAX6675_SS_PIN PE5 // TC1 - CS1 -//#define MAX6675_SS_PIN PF11 // TC2 - CS2 +//#define MAX6675_SS_PIN PE5 // TC1 - CS1 +//#define MAX6675_SS_PIN PF11 // TC2 - CS2 -#define POWER_LOSS_PIN PA2 // PW_DET -#define PS_ON_PIN PG11 // PW_OFF -#define FIL_RUNOUT_PIN PA4 // MT_DET1 -//#define FIL_RUNOUT_PIN PE6 // MT_DET2 -//#define FIL_RUNOUT_PIN PG14 // MT_DET3 +#define POWER_LOSS_PIN PA2 // PW_DET +#define PS_ON_PIN PG11 // PW_OFF +#define FIL_RUNOUT_PIN PA4 // MT_DET1 +//#define FIL_RUNOUT_PIN PE6 // MT_DET2 +//#define FIL_RUNOUT_PIN PG14 // MT_DET3 // // SD Card // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif #if SD_CONNECTION_IS(LCD) #define ENABLE_SPI2 - #define SD_DETECT_PIN PG3 - #define SCK_PIN PB13 - #define MISO_PIN PB14 - #define MOSI_PIN PB15 - #define SS_PIN PG6 + #define SD_DETECT_PIN PG3 + #define SCK_PIN PB13 + #define MISO_PIN PB14 + #define MOSI_PIN PB15 + #define SS_PIN PG6 #elif SD_CONNECTION_IS(ONBOARD) #define SDIO_SUPPORT - #define SD_DETECT_PIN PD12 + #define SD_DETECT_PIN PD12 #elif SD_CONNECTION_IS(CUSTOM_CABLE) #error "No custom SD drive cable defined for this board." #endif @@ -215,60 +215,60 @@ * to let the bootloader init the screen. */ #if ENABLED(FSMC_GRAPHICAL_TFT) - #define FSMC_CS_PIN PD7 // NE4 - #define FSMC_RS_PIN PD11 // A0 + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 - #define LCD_RESET_PIN PF6 - #define NO_LCD_REINIT // Suppress LCD re-initialization + #define LCD_RESET_PIN PF6 + #define NO_LCD_REINIT // Suppress LCD re-initialization - #define LCD_BACKLIGHT_PIN PD13 + #define LCD_BACKLIGHT_PIN PD13 #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PA7 + #define TOUCH_CS_PIN PA7 #else - #define BEEPER_PIN PC5 - #define BTN_ENC PG2 - #define BTN_EN1 PG5 - #define BTN_EN2 PG4 + #define BEEPER_PIN PC5 + #define BTN_ENC PG2 + #define BTN_EN1 PG5 + #define BTN_EN2 PG4 #endif #elif HAS_SPI_LCD - #define BEEPER_PIN PC5 - #define BTN_ENC PG2 - #define LCD_PINS_ENABLE PG0 - #define LCD_PINS_RS PG1 - #define BTN_EN1 PG5 - #define BTN_EN2 PG4 + #define BEEPER_PIN PC5 + #define BTN_ENC PG2 + #define LCD_PINS_ENABLE PG0 + #define LCD_PINS_RS PG1 + #define BTN_EN1 PG5 + #define BTN_EN2 PG4 // MKS MINI12864 and MKS LCD12864B. If using MKS LCD12864A (Need to remove RPK2 resistor) #if ENABLED(MKS_MINI_12864) - #define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN -1 - #define DOGLCD_A0 PF12 - #define DOGLCD_CS PF15 - #define DOGLCD_SCK PB13 - #define DOGLCD_MOSI PB15 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN -1 + #define DOGLCD_A0 PF12 + #define DOGLCD_CS PF15 + #define DOGLCD_SCK PB13 + #define DOGLCD_MOSI PB15 - #else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY + #else // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY - #define LCD_PINS_D4 PF14 + #define LCD_PINS_D4 PF14 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PF15 - #define LCD_PINS_D6 PF12 - #define LCD_PINS_D7 PF13 + #define LCD_PINS_D5 PF15 + #define LCD_PINS_D6 PF12 + #define LCD_PINS_D7 PF13 #endif #endif // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY #endif #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(125) + #define ST7920_DELAY_1 DELAY_NS(125) #endif #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(125) + #define ST7920_DELAY_2 DELAY_NS(125) #endif #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(125) + #define ST7920_DELAY_3 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/stm32f1/pins_MORPHEUS.h b/Marlin/src/pins/stm32f1/pins_MORPHEUS.h index 8c583434e4..7311d91a80 100644 --- a/Marlin/src/pins/stm32f1/pins_MORPHEUS.h +++ b/Marlin/src/pins/stm32f1/pins_MORPHEUS.h @@ -39,53 +39,53 @@ // // Limit Switches // -#define X_MIN_PIN PB14 -#define Y_MIN_PIN PB13 -#define Z_MIN_PIN PB12 +#define X_MIN_PIN PB14 +#define Y_MIN_PIN PB13 +#define Z_MIN_PIN PB12 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN PB9 + #define Z_MIN_PROBE_PIN PB9 #endif // // Steppers // // X & Y enable are the same -#define X_STEP_PIN PB7 -#define X_DIR_PIN PB6 -#define X_ENABLE_PIN PB8 +#define X_STEP_PIN PB7 +#define X_DIR_PIN PB6 +#define X_ENABLE_PIN PB8 -#define Y_STEP_PIN PB5 -#define Y_DIR_PIN PB4 -#define Y_ENABLE_PIN PB8 +#define Y_STEP_PIN PB5 +#define Y_DIR_PIN PB4 +#define Y_ENABLE_PIN PB8 -#define Z_STEP_PIN PA15 -#define Z_DIR_PIN PA10 -#define Z_ENABLE_PIN PB3 +#define Z_STEP_PIN PA15 +#define Z_DIR_PIN PA10 +#define Z_ENABLE_PIN PB3 -#define E0_STEP_PIN PA8 -#define E0_DIR_PIN PB15 -#define E0_ENABLE_PIN PA9 +#define E0_STEP_PIN PA8 +#define E0_DIR_PIN PB15 +#define E0_ENABLE_PIN PA9 // // Temperature Sensors // -#define TEMP_0_PIN PB1 // Analog Input (HOTEND thermistor) -#define TEMP_BED_PIN PB0 // Analog Input (BED thermistor) +#define TEMP_0_PIN PB1 // Analog Input (HOTEND thermistor) +#define TEMP_BED_PIN PB0 // Analog Input (BED thermistor) // // Heaters / Fans // -#define HEATER_0_PIN PA2 // HOTEND MOSFET -#define HEATER_BED_PIN PA0 // BED MOSFET +#define HEATER_0_PIN PA2 // HOTEND MOSFET +#define HEATER_BED_PIN PA0 // BED MOSFET -#define FAN_PIN PA1 // FAN1 header on board - PRINT FAN +#define FAN_PIN PA1 // FAN1 header on board - PRINT FAN // // Misc. // -#define LED_PIN PC13 -#define SDSS PA3 +#define LED_PIN PC13 +#define SDSS PA3 diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h index b43492af21..d144c0e692 100644 --- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -38,61 +38,61 @@ // // Limit Switches // -#define X_STOP_PIN PB3 -#define Y_STOP_PIN PB4 -#define Z_STOP_PIN PB5 +#define X_STOP_PIN PB3 +#define Y_STOP_PIN PB4 +#define Z_STOP_PIN PB5 // // Steppers // -#define X_STEP_PIN PC0 -#define X_DIR_PIN PC1 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PC0 +#define X_DIR_PIN PC1 +#define X_ENABLE_PIN PA8 -#define Y_STEP_PIN PC2 -#define Y_DIR_PIN PC3 -#define Y_ENABLE_PIN PA8 +#define Y_STEP_PIN PC2 +#define Y_DIR_PIN PC3 +#define Y_ENABLE_PIN PA8 -#define Z_STEP_PIN PC4 -#define Z_DIR_PIN PC5 -#define Z_ENABLE_PIN PA8 +#define Z_STEP_PIN PC4 +#define Z_DIR_PIN PC5 +#define Z_ENABLE_PIN PA8 -#define E0_STEP_PIN PC6 -#define E0_DIR_PIN PC7 -#define E0_ENABLE_PIN PA8 +#define E0_STEP_PIN PC6 +#define E0_DIR_PIN PC7 +#define E0_ENABLE_PIN PA8 /** * TODO: Currently using same Enable pin to all steppers. */ -#define E1_STEP_PIN PC8 -#define E1_DIR_PIN PC9 -#define E1_ENABLE_PIN PA8 +#define E1_STEP_PIN PC8 +#define E1_DIR_PIN PC9 +#define E1_ENABLE_PIN PA8 -#define E2_STEP_PIN PC10 -#define E2_DIR_PIN PC11 -#define E2_ENABLE_PIN PA8 +#define E2_STEP_PIN PC10 +#define E2_DIR_PIN PC11 +#define E2_ENABLE_PIN PA8 // // Misc. Functions // -#define SDSS PA4 -#define LED_PIN PD2 +#define SDSS PA4 +#define LED_PIN PD2 // // Heaters / Fans // -#define HEATER_0_PIN PB0 // EXTRUDER 1 -#define HEATER_1_PIN PB1 +#define HEATER_0_PIN PB0 // EXTRUDER 1 +#define HEATER_1_PIN PB1 -#define HEATER_BED_PIN PA3 // BED +#define HEATER_BED_PIN PA3 // BED // // Temperature Sensors // -#define TEMP_BED_PIN PA0 // Analog Input -#define TEMP_0_PIN PA1 // Analog Input -#define TEMP_1_PIN PA2 // Analog Input +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN PA2 // Analog Input // // LCD Pins @@ -100,25 +100,25 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #else - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 @@ -132,14 +132,14 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define LCD_BACKLIGHT_PIN 39 @@ -147,112 +147,112 @@ #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 - #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define BTN_ENC -1 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define DOGLCD_CS 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 - #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define SDSS 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 + #define STAT_LED_RED_PIN 32 #define STAT_LED_BLUE_PIN 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define KILL_PIN 41 + #define BEEPER_PIN 23 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 #define LCD_BACKLIGHT_PIN 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define SDSS 53 - #define KILL_PIN 64 + #define KILL_PIN 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 // not connected to a pin - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #else - //#define SD_DETECT_PIN -1 // Ramps doesn't use this + //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index 99f1cea35c..58b13b90df 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -41,72 +41,72 @@ // // Limit Switches // -#define X_STOP_PIN PD0 -#define Y_STOP_PIN PD1 -#define Z_STOP_PIN PD4 +#define X_STOP_PIN PD0 +#define Y_STOP_PIN PD1 +#define Z_STOP_PIN PD4 // // Steppers // -#define X_STEP_PIN PE1 -#define X_DIR_PIN PE0 -#define X_ENABLE_PIN PC0 +#define X_STEP_PIN PE1 +#define X_DIR_PIN PE0 +#define X_ENABLE_PIN PC0 -#define Y_STEP_PIN PE3 -#define Y_DIR_PIN PE2 -#define Y_ENABLE_PIN PC1 +#define Y_STEP_PIN PE3 +#define Y_DIR_PIN PE2 +#define Y_ENABLE_PIN PC1 -#define Z_STEP_PIN PE5 -#define Z_DIR_PIN PE4 -#define Z_ENABLE_PIN PC2 +#define Z_STEP_PIN PE5 +#define Z_DIR_PIN PE4 +#define Z_ENABLE_PIN PC2 -#define E0_STEP_PIN PE7 -#define E0_DIR_PIN PE6 -#define E0_ENABLE_PIN PC3 +#define E0_STEP_PIN PE7 +#define E0_DIR_PIN PE6 +#define E0_ENABLE_PIN PC3 -#define E1_STEP_PIN PE9 -#define E1_DIR_PIN PE8 -#define E1_ENABLE_PIN PC4 +#define E1_STEP_PIN PE9 +#define E1_DIR_PIN PE8 +#define E1_ENABLE_PIN PC4 -#define E2_STEP_PIN PE11 -#define E2_DIR_PIN PE10 -#define E2_ENABLE_PIN PC5 +#define E2_STEP_PIN PE11 +#define E2_DIR_PIN PE10 +#define E2_ENABLE_PIN PC5 // // Misc. Functions // -#define SDSS PA15 -#define LED_PIN PB2 +#define SDSS PA15 +#define LED_PIN PB2 // // Heaters / Fans // -#define HEATER_0_PIN PD12 // EXTRUDER 1 -//#define HEATER_1_PIN PD13 +#define HEATER_0_PIN PD12 // EXTRUDER 1 +//#define HEATER_1_PIN PD13 -#define HEATER_BED_PIN PB9 // BED -//#define HEATER_BED2_PIN -1 // BED2 -//#define HEATER_BED3_PIN -1 // BED3 +#define HEATER_BED_PIN PB9 // BED +//#define HEATER_BED2_PIN -1 // BED2 +//#define HEATER_BED3_PIN -1 // BED3 #ifndef FAN_PIN - #define FAN_PIN PD14 + #define FAN_PIN PD14 #endif -#define FAN1_PIN PD13 +#define FAN1_PIN PD13 #define FAN_SOFT_PWM // // Temperature Sensors // -#define TEMP_BED_PIN PA0 -#define TEMP_0_PIN PA1 -#define TEMP_1_PIN PA2 -#define TEMP_2_PIN PA3 +#define TEMP_BED_PIN PA0 +#define TEMP_0_PIN PA1 +#define TEMP_1_PIN PA2 +#define TEMP_2_PIN PA3 // Laser control #if HAS_CUTTER - #define SPINDLE_LASER_PWM_PIN PB8 - #define SPINDLE_LASER_ENA_PIN PD5 + #define SPINDLE_LASER_PWM_PIN PB8 + #define SPINDLE_LASER_ENA_PIN PD5 #endif // @@ -115,54 +115,54 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #else - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet - //#define SHIFT_CLK 38 - //#define SHIFT_LD 42 - //#define SHIFT_OUT 40 - //#define SHIFT_EN 17 + //#define SHIFT_CLK 38 + //#define SHIFT_LD 42 + //#define SHIFT_OUT 40 + //#define SHIFT_EN 17 #endif #endif #if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CS_PIN PB12 // SPI2_NSS - #define TOUCH_SCK_PIN PB13 - #define TOUCH_MOSI_PIN PB14 - #define TOUCH_MISO_PIN PB15 - #define TOUCH_INT_PIN PC6 // (PenIRQ coming from ADS7843) + #define TOUCH_CS_PIN PB12 // SPI2_NSS + #define TOUCH_SCK_PIN PB13 + #define TOUCH_MOSI_PIN PB14 + #define TOUCH_MISO_PIN PB15 + #define TOUCH_INT_PIN PC6 // (PenIRQ coming from ADS7843) #elif ENABLED(NEWPANEL) #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define LCD_BACKLIGHT_PIN 39 @@ -170,113 +170,113 @@ #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 - #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 - #define LCD_SDSS 53 + #define BTN_ENC -1 + #define LCD_SDSS 53 #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define DOGLCD_CS 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 - #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define SDSS 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 + #define STAT_LED_RED_PIN 32 #define STAT_LED_BLUE_PIN 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define LCD_SDSS 53 + #define KILL_PIN 41 + #define BEEPER_PIN 23 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 #define LCD_BACKLIGHT_PIN 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define SDSS 53 - #define KILL_PIN 64 + #define KILL_PIN 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 // not connected to a pin #define SD_DETECT_PIN 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define KILL_PIN 41 #else - //#define SD_DETECT_PIN -1 // Ramps doesn't use this + //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_ARMED.h b/Marlin/src/pins/stm32f4/pins_ARMED.h index 1e33336512..ddbe09c355 100644 --- a/Marlin/src/pins/stm32f4/pins_ARMED.h +++ b/Marlin/src/pins/stm32f4/pins_ARMED.h @@ -34,21 +34,21 @@ #define ARMED_V1_1 #endif -#undef BOARD_INFO_NAME // Defined on the command line by Arduino Core STM32 +#undef BOARD_INFO_NAME // Defined on the command line by Arduino Core STM32 #define BOARD_INFO_NAME "Arm'ed" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #define I2C_EEPROM -#undef E2END // Defined in Arduino Core STM32 to be used with EEPROM emulation. This board uses a real EEPROM. -#define E2END 0xFFF // 4KB +#undef E2END // Defined in Arduino Core STM32 to be used with EEPROM emulation. This board uses a real EEPROM. +#define E2END 0xFFF // 4KB // // Limit Switches // -#define X_STOP_PIN PE0 -#define Y_STOP_PIN PE1 -#define Z_STOP_PIN PE14 +#define X_STOP_PIN PE0 +#define Y_STOP_PIN PE1 +#define Z_STOP_PIN PE14 // // Z Probe (when not Z_MIN_PIN) @@ -61,7 +61,7 @@ // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA3 + #define FIL_RUNOUT_PIN PA3 #endif // @@ -69,163 +69,163 @@ // #ifdef ARMED_SWAP_X_E1 - #define X_STEP_PIN PE4 - #define X_DIR_PIN PE2 - #define X_ENABLE_PIN PE3 - #define X_CS_PIN PE5 + #define X_STEP_PIN PE4 + #define X_DIR_PIN PE2 + #define X_ENABLE_PIN PE3 + #define X_CS_PIN PE5 #else - #define X_STEP_PIN PD3 - #define X_DIR_PIN PD2 - #define X_ENABLE_PIN PD0 - #define X_CS_PIN PD1 + #define X_STEP_PIN PD3 + #define X_DIR_PIN PD2 + #define X_ENABLE_PIN PD0 + #define X_CS_PIN PD1 #endif -#define Y_STEP_PIN PE11 -#define Y_DIR_PIN PE10 -#define Y_ENABLE_PIN PE13 -#define Y_CS_PIN PE12 +#define Y_STEP_PIN PE11 +#define Y_DIR_PIN PE10 +#define Y_ENABLE_PIN PE13 +#define Y_CS_PIN PE12 -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD7 -#define Z_ENABLE_PIN PD4 -#define Z_CS_PIN PD5 +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD7 +#define Z_ENABLE_PIN PD4 +#define Z_CS_PIN PD5 -#define E0_STEP_PIN PB5 -#define E0_DIR_PIN PB6 +#define E0_STEP_PIN PB5 +#define E0_DIR_PIN PB6 #ifdef ARMED_V1_1 - #define E0_ENABLE_PIN PC12 + #define E0_ENABLE_PIN PC12 #else - #define E0_ENABLE_PIN PB3 + #define E0_ENABLE_PIN PB3 #endif -#define E0_CS_PIN PB4 +#define E0_CS_PIN PB4 #ifdef ARMED_SWAP_X_E1 - #define E1_STEP_PIN PD3 - #define E1_DIR_PIN PD2 - #define E1_ENABLE_PIN PD0 - #define E1_CS_PIN PD1 + #define E1_STEP_PIN PD3 + #define E1_DIR_PIN PD2 + #define E1_ENABLE_PIN PD0 + #define E1_CS_PIN PD1 #else - #define E1_STEP_PIN PE4 - #define E1_DIR_PIN PE2 - #define E1_ENABLE_PIN PE3 - #define E1_CS_PIN PE5 + #define E1_STEP_PIN PE4 + #define E1_DIR_PIN PE2 + #define E1_ENABLE_PIN PE3 + #define E1_CS_PIN PE5 #endif // // Temperature Sensors // -#define TEMP_0_PIN PC0 // Analog Input -#define TEMP_1_PIN PC1 // Analog Input -#define TEMP_BED_PIN PC2 // Analog Input +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN PC1 // Analog Input +#define TEMP_BED_PIN PC2 // Analog Input #if HOTENDS == 1 && TEMP_SENSOR_PROBE - #define TEMP_PROBE_PIN PC1 + #define TEMP_PROBE_PIN PC1 #endif // // Heaters / Fans // -#define HEATER_0_PIN PA1 // Hardware PWM -#define HEATER_1_PIN PA2 // Hardware PWM -#define HEATER_BED_PIN PA0 // Hardware PWM +#define HEATER_0_PIN PA1 // Hardware PWM +#define HEATER_1_PIN PA2 // Hardware PWM +#define HEATER_BED_PIN PA0 // Hardware PWM -#define FAN_PIN PC6 // Hardware PWM, Part cooling fan -#define FAN1_PIN PC7 // Hardware PWM, Extruder fan -#define FAN2_PIN PC8 // Hardware PWM, Controller fan +#define FAN_PIN PC6 // Hardware PWM, Part cooling fan +#define FAN1_PIN PC7 // Hardware PWM, Extruder fan +#define FAN2_PIN PC8 // Hardware PWM, Controller fan // // Misc functions // -#define SDSS PE7 -#define LED_PIN PB7 // Heart beat -#define PS_ON_PIN PA10 -#define KILL_PIN PA8 -#define PWR_LOSS PA4 // Power loss / nAC_FAULT +#define SDSS PE7 +#define LED_PIN PB7 // Heart beat +#define PS_ON_PIN PA10 +#define KILL_PIN PA8 +#define PWR_LOSS PA4 // Power loss / nAC_FAULT // // LCD / Controller // -#define SD_DETECT_PIN PA15 -#define BEEPER_PIN PC9 +#define SD_DETECT_PIN PA15 +#define BEEPER_PIN PC9 #if ENABLED(FYSETC_MINI_12864) // // See https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8 // - #define DOGLCD_A0 PE9 - #define DOGLCD_CS PE8 + #define DOGLCD_A0 PE9 + #define DOGLCD_CS PE8 - #define LCD_BACKLIGHT_PIN -1 + #define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN PB12 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN PB12 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB13 + #define RGB_LED_R_PIN PB13 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB14 + #define RGB_LED_G_PIN PB14 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PB15 + #define RGB_LED_B_PIN PB15 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN PB13 + #define NEOPIXEL_PIN PB13 #endif #else - #define LCD_PINS_RS PE9 - #define LCD_PINS_ENABLE PE8 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PE9 + #define LCD_PINS_ENABLE PE8 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS PB13 - #define DOGLCD_A0 PB14 + #define DOGLCD_CS PB13 + #define DOGLCD_A0 PB14 #endif #endif -#define BTN_EN1 PC4 -#define BTN_EN2 PC5 -#define BTN_ENC PC3 +#define BTN_EN1 PC4 +#define BTN_EN2 PC5 +#define BTN_ENC PC3 // // Extension pins // -#define EXT0_PIN PB0 -#define EXT1_PIN PB1 -#define EXT2_PIN PB2 -#define EXT3_PIN PD8 -#define EXT4_PIN PD9 -#define EXT5_PIN PD10 -#define EXT6_PIN PD11 -#define EXT7_PIN PD12 -#define EXT8_PIN PB10 -#define EXT9_PIN PB11 +#define EXT0_PIN PB0 +#define EXT1_PIN PB1 +#define EXT2_PIN PB2 +#define EXT3_PIN PD8 +#define EXT4_PIN PD9 +#define EXT5_PIN PD10 +#define EXT6_PIN PD11 +#define EXT7_PIN PD12 +#define EXT8_PIN PB10 +#define EXT9_PIN PB11 #if HAS_TMC_UART // TMC2208/TMC2209 stepper drivers // // Software serial // - #define X_SERIAL_TX_PIN EXT0_PIN - #define X_SERIAL_RX_PIN EXT0_PIN + #define X_SERIAL_TX_PIN EXT0_PIN + #define X_SERIAL_RX_PIN EXT0_PIN - #define Y_SERIAL_TX_PIN EXT1_PIN - #define Y_SERIAL_RX_PIN EXT1_PIN + #define Y_SERIAL_TX_PIN EXT1_PIN + #define Y_SERIAL_RX_PIN EXT1_PIN - #define Z_SERIAL_TX_PIN EXT2_PIN - #define Z_SERIAL_RX_PIN EXT2_PIN + #define Z_SERIAL_TX_PIN EXT2_PIN + #define Z_SERIAL_RX_PIN EXT2_PIN - #define E0_SERIAL_TX_PIN EXT3_PIN - #define E0_SERIAL_RX_PIN EXT3_PIN + #define E0_SERIAL_TX_PIN EXT3_PIN + #define E0_SERIAL_RX_PIN EXT3_PIN - #define E1_SERIAL_RX_PIN EXT4_PIN - #define E1_SERIAL_TX_PIN EXT4_PIN + #define E1_SERIAL_RX_PIN EXT4_PIN + #define E1_SERIAL_TX_PIN EXT4_PIN - #define Z2_SERIAL_RX_PIN EXT4_PIN - #define Z2_SERIAL_TX_PIN EXT4_PIN + #define Z2_SERIAL_RX_PIN EXT4_PIN + #define Z2_SERIAL_TX_PIN EXT4_PIN #define TMC_BAUD_RATE 19200 #endif diff --git a/Marlin/src/pins/stm32f4/pins_BEAST.h b/Marlin/src/pins/stm32f4/pins_BEAST.h index d779994d19..5be4368789 100644 --- a/Marlin/src/pins/stm32f4/pins_BEAST.h +++ b/Marlin/src/pins/stm32f4/pins_BEAST.h @@ -41,70 +41,70 @@ // // Steppers // -#define X_STEP_PIN PE0 -#define X_DIR_PIN PE1 -#define X_ENABLE_PIN PC0 -#define X_MIN_PIN PD5 -#define X_MAX_PIN -1 +#define X_STEP_PIN PE0 +#define X_DIR_PIN PE1 +#define X_ENABLE_PIN PC0 +#define X_MIN_PIN PD5 +#define X_MAX_PIN -1 -#define Y_STEP_PIN PE2 -#define Y_DIR_PIN PE3 -#define Y_ENABLE_PIN PC1 -#define Y_MIN_PIN PD6 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 +#define Y_ENABLE_PIN PC1 +#define Y_MIN_PIN PD6 #define Y_MAX_PIN -#define Z_STEP_PIN PE4 -#define Z_DIR_PIN PE5 -#define Z_ENABLE_PIN PC2 -#define Z_MIN_PIN PD7 -#define Z_MAX_PIN -1 +#define Z_STEP_PIN PE4 +#define Z_DIR_PIN PE5 +#define Z_ENABLE_PIN PC2 +#define Z_MIN_PIN PD7 +#define Z_MAX_PIN -1 -#define Y2_STEP_PIN -1 -#define Y2_DIR_PIN -1 -#define Y2_ENABLE_PIN -1 +#define Y2_STEP_PIN -1 +#define Y2_DIR_PIN -1 +#define Y2_ENABLE_PIN -1 -#define Z2_STEP_PIN -1 -#define Z2_DIR_PIN -1 -#define Z2_ENABLE_PIN -1 +#define Z2_STEP_PIN -1 +#define Z2_DIR_PIN -1 +#define Z2_ENABLE_PIN -1 -#define E0_STEP_PIN PE6 -#define E0_DIR_PIN PE7 -#define E0_ENABLE_PIN PC3 +#define E0_STEP_PIN PE6 +#define E0_DIR_PIN PE7 +#define E0_ENABLE_PIN PC3 /** * TODO: Currently using same Enable pin to all steppers. */ -#define E1_STEP_PIN PE8 -#define E1_DIR_PIN PE9 -#define E1_ENABLE_PIN PC4 +#define E1_STEP_PIN PE8 +#define E1_DIR_PIN PE9 +#define E1_ENABLE_PIN PC4 -#define E2_STEP_PIN PE10 -#define E2_DIR_PIN PE11 -#define E2_ENABLE_PIN PC5 +#define E2_STEP_PIN PE10 +#define E2_DIR_PIN PE11 +#define E2_ENABLE_PIN PC5 // // Misc. Functions // -#define SDSS PA15 -#define LED_PIN PB2 +#define SDSS PA15 +#define LED_PIN PB2 -#define PS_ON_PIN -1 -#define KILL_PIN -1 +#define PS_ON_PIN -1 +#define KILL_PIN -1 // // Heaters / Fans // -#define HEATER_0_PIN PD12 // EXTRUDER 1 -#define HEATER_1_PIN PD13 -#define HEATER_2_PIN PD14 +#define HEATER_0_PIN PD12 // EXTRUDER 1 +#define HEATER_1_PIN PD13 +#define HEATER_2_PIN PD14 -#define HEATER_BED_PIN PB9 // BED -#define HEATER_BED2_PIN -1 // BED2 -#define HEATER_BED3_PIN -1 // BED3 +#define HEATER_BED_PIN PB9 // BED +#define HEATER_BED2_PIN -1 // BED2 +#define HEATER_BED3_PIN -1 // BED3 #ifndef FAN_PIN - #define FAN_PIN PB10 + #define FAN_PIN PB10 #endif #define FAN_SOFT_PWM @@ -112,10 +112,10 @@ // // Temperature Sensors // -#define TEMP_BED_PIN PA0 // Analog Input -#define TEMP_0_PIN PA1 // Analog Input -#define TEMP_1_PIN PA2 // Analog Input -#define TEMP_2_PIN PA3 // Analog Input +#define TEMP_BED_PIN PA0 // Analog Input +#define TEMP_0_PIN PA1 // Analog Input +#define TEMP_1_PIN PA2 // Analog Input +#define TEMP_2_PIN PA3 // Analog Input // // LCD Pins @@ -123,25 +123,25 @@ #if HAS_SPI_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define LCD_PINS_RS 49 // CS chip select /SS chip slave select - #define LCD_PINS_ENABLE 51 // SID (MOSI) - #define LCD_PINS_D4 52 // SCK (CLK) clock + #define LCD_PINS_RS 49 // CS chip select /SS chip slave select + #define LCD_PINS_ENABLE 51 // SID (MOSI) + #define LCD_PINS_D4 52 // SCK (CLK) clock #elif BOTH(NEWPANEL, PANEL_ONE) - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #else - #define LCD_PINS_RS PB8 - #define LCD_PINS_ENABLE PD2 - #define LCD_PINS_D4 PB12 - #define LCD_PINS_D5 PB13 - #define LCD_PINS_D6 PB14 - #define LCD_PINS_D7 PB15 + #define LCD_PINS_RS PB8 + #define LCD_PINS_ENABLE PD2 + #define LCD_PINS_D4 PB12 + #define LCD_PINS_D5 PB13 + #define LCD_PINS_D6 PB14 + #define LCD_PINS_D7 PB15 #if DISABLED(NEWPANEL) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons attached to a shift register // Not wired yet //#define SHIFT_CLK 38 @@ -155,14 +155,14 @@ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) - #define BEEPER_PIN 37 + #define BEEPER_PIN 37 - #define BTN_EN1 31 - #define BTN_EN2 33 - #define BTN_ENC 35 + #define BTN_EN1 31 + #define BTN_EN2 33 + #define BTN_ENC 35 - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) #define LCD_BACKLIGHT_PIN 39 @@ -170,113 +170,113 @@ #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SD_DETECT_PIN 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SD_DETECT_PIN 42 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 47 - #define BTN_EN2 43 - #define BTN_ENC 32 - #define LCD_SDSS 53 - #define SD_DETECT_PIN -1 - #define KILL_PIN 41 + #define BTN_EN1 47 + #define BTN_EN2 43 + #define BTN_ENC 32 + #define LCD_SDSS 53 + #define SD_DETECT_PIN -1 + #define KILL_PIN 41 #elif ENABLED(LCD_I2C_VIKI) - #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. - #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. + #define BTN_EN1 22 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42. + #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. - #define BTN_ENC -1 - #define LCD_SDSS 53 - #define SD_DETECT_PIN 49 + #define BTN_ENC -1 + #define LCD_SDSS 53 + #define SD_DETECT_PIN 49 #elif ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 45 + #define DOGLCD_A0 44 + #define DOGLCD_CS 45 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 22 - #define BTN_EN2 7 - #define BTN_ENC 39 + #define BTN_EN1 22 + #define BTN_EN2 7 + #define BTN_ENC 39 - #define SDSS 53 - #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define SDSS 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board - #define KILL_PIN 31 + #define KILL_PIN 31 - #define STAT_LED_RED_PIN 32 + #define STAT_LED_RED_PIN 32 #define STAT_LED_BLUE_PIN 35 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) - #define BTN_EN1 35 - #define BTN_EN2 37 - #define BTN_ENC 31 - #define SD_DETECT_PIN 49 - #define LCD_SDSS 53 - #define KILL_PIN 41 - #define BEEPER_PIN 23 - #define DOGLCD_CS 29 - #define DOGLCD_A0 27 + #define BTN_EN1 35 + #define BTN_EN2 37 + #define BTN_ENC 31 + #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #define KILL_PIN 41 + #define BEEPER_PIN 23 + #define DOGLCD_CS 29 + #define DOGLCD_A0 27 #define LCD_BACKLIGHT_PIN 33 #elif ENABLED(MINIPANEL) - #define BEEPER_PIN 42 + #define BEEPER_PIN 42 // Pins for DOGM SPI LCD Support - #define DOGLCD_A0 44 - #define DOGLCD_CS 66 - #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 - #define SDSS 53 + #define DOGLCD_A0 44 + #define DOGLCD_CS 66 + #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65 + #define SDSS 53 - #define KILL_PIN 64 + #define KILL_PIN 64 // GLCD features // Uncomment screen orientation //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 // The encoder and click button - #define BTN_EN1 40 - #define BTN_EN2 63 - #define BTN_ENC 59 + #define BTN_EN1 40 + #define BTN_EN2 63 + #define BTN_ENC 59 // not connected to a pin - #define SD_DETECT_PIN 49 + #define SD_DETECT_PIN 49 #else // Beeper on AUX-4 - #define BEEPER_PIN 33 + #define BEEPER_PIN 33 // Buttons directly attached to AUX-2 #if ENABLED(REPRAPWORLD_KEYPAD) - #define BTN_EN1 64 - #define BTN_EN2 59 - #define BTN_ENC 63 - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define BTN_EN1 64 + #define BTN_EN2 59 + #define BTN_ENC 63 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #elif ENABLED(PANEL_ONE) - #define BTN_EN1 59 // AUX2 PIN 3 - #define BTN_EN2 63 // AUX2 PIN 4 - #define BTN_ENC 49 // AUX3 PIN 7 + #define BTN_EN1 59 // AUX2 PIN 3 + #define BTN_EN2 63 // AUX2 PIN 4 + #define BTN_ENC 49 // AUX3 PIN 7 #else - #define BTN_EN1 37 - #define BTN_EN2 35 - #define BTN_ENC 31 + #define BTN_EN1 37 + #define BTN_EN2 35 + #define BTN_ENC 31 #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #define SD_DETECT_PIN 49 + #define KILL_PIN 41 #else - //#define SD_DETECT_PIN -1 // Ramps doesn't use this + //#define SD_DETECT_PIN -1 // Ramps doesn't use this #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index d0edf897f4..170b90368b 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -40,116 +40,116 @@ #define DEFAULT_MACHINE_NAME "STM32F407VET6" //#define I2C_EEPROM -//#define E2END 0x1FFF // 8KB +//#define E2END 0x1FFF // 8KB #define SRAM_EEPROM_EMULATION // // Servos // -#define SERVO0_PIN PC6 -#define SERVO1_PIN PC7 +#define SERVO0_PIN PC6 +#define SERVO1_PIN PC7 // // Limit Switches // -#define X_MIN_PIN PC13 -#define X_MAX_PIN PA15 -#define Y_MIN_PIN PA5 -#define Y_MAX_PIN PD12 -#define Z_MIN_PIN PD14 -#define Z_MAX_PIN PD15 +#define X_MIN_PIN PC13 +#define X_MAX_PIN PA15 +#define Y_MIN_PIN PA5 +#define Y_MAX_PIN PD12 +#define Z_MIN_PIN PD14 +#define Z_MAX_PIN PD15 // // Steppers // -#define X_STEP_PIN PC4 -#define X_DIR_PIN PA4 -#define X_ENABLE_PIN PE7 +#define X_STEP_PIN PC4 +#define X_DIR_PIN PA4 +#define X_ENABLE_PIN PE7 -#define Y_STEP_PIN PE5 -#define Y_DIR_PIN PE2 -#define Y_ENABLE_PIN PE6 +#define Y_STEP_PIN PE5 +#define Y_DIR_PIN PE2 +#define Y_ENABLE_PIN PE6 -#define Z_STEP_PIN PD5 -#define Z_DIR_PIN PD3 -#define Z_ENABLE_PIN PD6 +#define Z_STEP_PIN PD5 +#define Z_DIR_PIN PD3 +#define Z_ENABLE_PIN PD6 -#define E0_STEP_PIN PD7 -#define E0_DIR_PIN PD0 -#define E0_ENABLE_PIN PB9 +#define E0_STEP_PIN PD7 +#define E0_DIR_PIN PD0 +#define E0_ENABLE_PIN PB9 -#define E1_STEP_PIN PE0 -#define E1_DIR_PIN PE1 -#define E1_ENABLE_PIN PB8 +#define E1_STEP_PIN PE0 +#define E1_DIR_PIN PE1 +#define E1_ENABLE_PIN PB8 // // Temperature Sensors // -#define TEMP_0_PIN PC0 // T0 -#define TEMP_1_PIN PC1 // T1 -#define TEMP_BED_PIN PC2 // TB +#define TEMP_0_PIN PC0 // T0 +#define TEMP_1_PIN PC1 // T1 +#define TEMP_BED_PIN PC2 // TB #ifndef TEMP_CHAMBER_PIN - #define TEMP_CHAMBER_PIN PC3 // TC + #define TEMP_CHAMBER_PIN PC3 // TC #endif // // Heaters / Fans // -#define HEATER_0_PIN PA2 // Heater0 -#define HEATER_1_PIN PA3 // Heater1 -#define HEATER_BED_PIN PA1 // Hotbed +#define HEATER_0_PIN PA2 // Heater0 +#define HEATER_1_PIN PA3 // Heater1 +#define HEATER_BED_PIN PA1 // Hotbed -#define FAN_PIN PE9 // Fan0 -#define FAN1_PIN PE11 // Fan1 -#define FAN2_PIN PE13 // Fan2 -#define FAN3_PIN PE14 // Fan3 +#define FAN_PIN PE9 // Fan0 +#define FAN1_PIN PE11 // Fan1 +#define FAN2_PIN PE13 // Fan2 +#define FAN3_PIN PE14 // Fan3 // // Misc. Functions // -#define LED_PIN PA6 -//#define LED_PIN PA7 -#define KILL_PIN PB1 +#define LED_PIN PA6 +//#define LED_PIN PA7 +#define KILL_PIN PB1 // // LCD / Controller // -//#define SD_DETECT_PIN PC5 -//#define SD_DETECT_PIN PA8 // SDIO SD_DETECT_PIN, external SDIO card reader only +//#define SD_DETECT_PIN PC5 +//#define SD_DETECT_PIN PA8 // SDIO SD_DETECT_PIN, external SDIO card reader only -#define BEEPER_PIN PD10 -#define LCD_PINS_RS PE15 -#define LCD_PINS_ENABLE PD8 -#define LCD_PINS_D4 PE10 -#define LCD_PINS_D5 PE12 -#define LCD_PINS_D6 PD1 -#define LCD_PINS_D7 PE8 -#define BTN_ENC PD9 -#define BTN_EN1 PD4 -#define BTN_EN2 PD13 +#define BEEPER_PIN PD10 +#define LCD_PINS_RS PE15 +#define LCD_PINS_ENABLE PD8 +#define LCD_PINS_D4 PE10 +#define LCD_PINS_D5 PE12 +#define LCD_PINS_D6 PD1 +#define LCD_PINS_D7 PE8 +#define BTN_ENC PD9 +#define BTN_EN1 PD4 +#define BTN_EN2 PD13 -#define DOGLCD_CS LCD_PINS_D5 -#define DOGLCD_A0 LCD_PINS_D6 +#define DOGLCD_CS LCD_PINS_D5 +#define DOGLCD_A0 LCD_PINS_D6 // // Onboard SD support // -#define SDIO_D0_PIN PC8 -#define SDIO_D1_PIN PC9 -#define SDIO_D2_PIN PC10 -#define SDIO_D3_PIN PC11 -#define SDIO_CK_PIN PC12 -#define SDIO_CMD_PIN PD2 +#define SDIO_D0_PIN PC8 +#define SDIO_D1_PIN PC9 +#define SDIO_D2_PIN PC10 +#define SDIO_D3_PIN PC11 +#define SDIO_CK_PIN PC12 +#define SDIO_CMD_PIN PD2 #if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD - #define SDIO_SUPPORT // Use SDIO for onboard SD + #define SDIO_SUPPORT // Use SDIO for onboard SD #ifndef SDIO_SUPPORT - #define SOFTWARE_SPI // Use soft SPI for onboard SD - #define SDSS SDIO_D3_PIN - #define SCK_PIN SDIO_CK_PIN - #define MISO_PIN SDIO_D0_PIN - #define MOSI_PIN SDIO_CMD_PIN + #define SOFTWARE_SPI // Use soft SPI for onboard SD + #define SDSS SDIO_D3_PIN + #define SCK_PIN SDIO_CK_PIN + #define MISO_PIN SDIO_D0_PIN + #define MOSI_PIN SDIO_CMD_PIN #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index 5d2c83e3b9..ee5c4da1fe 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -30,8 +30,8 @@ #define BOARD_INFO_NAME "BIGTREE Btt002 1.0" // Use one of these or SDCard-based Emulation will be used -//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation -#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation +//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation +#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation // Ignore temp readings during development. //#define BOGUS_TEMPERATURE_GRACE_PERIOD 2000 @@ -39,60 +39,60 @@ // // Limit Switches // -#define X_STOP_PIN PD3 -#define Y_STOP_PIN PD2 -#define Z_STOP_PIN PD1 // Shares J4 connector with PC3 +#define X_STOP_PIN PD3 +#define Y_STOP_PIN PD2 +#define Z_STOP_PIN PD1 // Shares J4 connector with PC3 // // Z Probe must be this pin // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN PD1 + #define Z_MIN_PROBE_PIN PD1 #endif // // Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA15 + #define FIL_RUNOUT_PIN PA15 #endif // // Power Loss Detection // #ifndef POWER_LOSS_PIN - #define POWER_LOSS_PIN PD4 + #define POWER_LOSS_PIN PD4 #endif // // Steppers // -#define X_STEP_PIN PA9 -#define X_DIR_PIN PA10 -#define X_ENABLE_PIN PA8 +#define X_STEP_PIN PA9 +#define X_DIR_PIN PA10 +#define X_ENABLE_PIN PA8 #ifndef X_CS_PIN - #define X_CS_PIN PE2 + #define X_CS_PIN PE2 #endif -#define Y_STEP_PIN PC8 -#define Y_DIR_PIN PC9 -#define Y_ENABLE_PIN PC7 +#define Y_STEP_PIN PC8 +#define Y_DIR_PIN PC9 +#define Y_ENABLE_PIN PC7 #ifndef Y_CS_PIN - #define Y_CS_PIN PE3 + #define Y_CS_PIN PE3 #endif -#define Z_STEP_PIN PD15 -#define Z_DIR_PIN PC6 -#define Z_ENABLE_PIN PD14 +#define Z_STEP_PIN PD15 +#define Z_DIR_PIN PC6 +#define Z_ENABLE_PIN PD14 #ifndef Z_CS_PIN - #define Z_CS_PIN PE4 + #define Z_CS_PIN PE4 #endif -#define E0_STEP_PIN PD12 -#define E0_DIR_PIN PD13 -#define E0_ENABLE_PIN PD11 +#define E0_STEP_PIN PD12 +#define E0_DIR_PIN PD13 +#define E0_ENABLE_PIN PD11 #ifndef E0_CS_PIN - #define E0_CS_PIN PD7 + #define E0_CS_PIN PD7 #endif // @@ -100,13 +100,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PB15 + #define TMC_SW_MOSI PB15 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PB14 + #define TMC_SW_MISO PB14 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PB13 + #define TMC_SW_SCK PB13 #endif #endif @@ -132,17 +132,17 @@ // // Software serial ## // - #define X_SERIAL_TX_PIN PE2 - #define X_SERIAL_RX_PIN PE2 + #define X_SERIAL_TX_PIN PE2 + #define X_SERIAL_RX_PIN PE2 - #define Y_SERIAL_TX_PIN PE3 - #define Y_SERIAL_RX_PIN PE3 + #define Y_SERIAL_TX_PIN PE3 + #define Y_SERIAL_RX_PIN PE3 - #define Z_SERIAL_TX_PIN PE4 - #define Z_SERIAL_RX_PIN PE4 + #define Z_SERIAL_TX_PIN PE4 + #define Z_SERIAL_RX_PIN PE4 - #define E0_SERIAL_TX_PIN PD7 - #define E0_SERIAL_RX_PIN PD7 + #define E0_SERIAL_TX_PIN PD7 + #define E0_SERIAL_RX_PIN PD7 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -151,32 +151,32 @@ // // Temperature Sensors // -#define TEMP_0_PIN PA2 // T0 <-> E0 -#define TEMP_1_PIN PA0 // T1 <-> E1 -#define TEMP_BED_PIN PA1 // T2 <-> Bed -#define TEMP_PROBE_PIN PC3 // Shares J4 connector with PD1 +#define TEMP_0_PIN PA2 // T0 <-> E0 +#define TEMP_1_PIN PA0 // T1 <-> E1 +#define TEMP_BED_PIN PA1 // T2 <-> Bed +#define TEMP_PROBE_PIN PC3 // Shares J4 connector with PD1 // // Heaters / Fans // -#define HEATER_0_PIN PE6 // Heater0 -#define HEATER_BED_PIN PE5 // Hotbed -#define FAN_PIN PB8 // Fan1 -#define FAN1_PIN PB9 // Fan0 +#define HEATER_0_PIN PE6 // Heater0 +#define HEATER_BED_PIN PE5 // Hotbed +#define FAN_PIN PB8 // Fan1 +#define FAN1_PIN PB9 // Fan0 // HAL SPI1 pins #define CUSTOM_SPI_PINS #if ENABLED(CUSTOM_SPI_PINS) - #define SCK_PIN PA5 // SPI1 SCLK - #define SS_PIN PA4 // SPI1 SSEL - #define MISO_PIN PA6 // SPI1 MISO - #define MOSI_PIN PA7 // SPI1 MOSI + #define SCK_PIN PA5 // SPI1 SCLK + #define SS_PIN PA4 // SPI1 SSEL + #define MISO_PIN PA6 // SPI1 MISO + #define MOSI_PIN PA7 // SPI1 MOSI #endif // // Misc. Functions // -#define SDSS PA4 +#define SDSS PA4 /** * -------------------------------------BTT002 V1.0----------------------------------------------- @@ -194,35 +194,35 @@ // LCDs and Controllers // #if HAS_SPI_LCD - #define BEEPER_PIN PE7 - #define BTN_ENC PB1 + #define BEEPER_PIN PE7 + #define BTN_ENC PB1 #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS PE12 + #define LCD_PINS_RS PE12 - #define BTN_EN1 PE9 - #define BTN_EN2 PE10 + #define BTN_EN1 PE9 + #define BTN_EN2 PE10 - #define LCD_PINS_ENABLE PE13 - #define LCD_PINS_D4 PE11 + #define LCD_PINS_ENABLE PE13 + #define LCD_PINS_D4 PE11 #else - #define LCD_PINS_RS PE8 + #define LCD_PINS_RS PE8 - #define BTN_EN1 PC5 - #define BTN_EN2 PB0 - #define SD_DETECT_PIN PC4 + #define BTN_EN1 PC5 + #define BTN_EN2 PB0 + #define SD_DETECT_PIN PC4 - #define LCD_SDSS PA4 + #define LCD_SDSS PA4 - #define LCD_PINS_ENABLE PE9 - #define LCD_PINS_D4 PE10 + #define LCD_PINS_ENABLE PE9 + #define LCD_PINS_D4 PE10 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PE11 - #define LCD_PINS_D6 PE12 - #define LCD_PINS_D7 PE13 + #define LCD_PINS_D5 PE11 + #define LCD_PINS_D6 PE12 + #define LCD_PINS_D7 PE13 #endif #endif @@ -240,14 +240,14 @@ // RGB LEDs // #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB5 + #define RGB_LED_R_PIN PB5 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB4 + #define RGB_LED_G_PIN PB4 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PB3 + #define RGB_LED_B_PIN PB3 #endif #ifndef RGB_LED_W_PIN - #define RGB_LED_W_PIN -1 + #define RGB_LED_W_PIN -1 #endif diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index eaef0b09df..ac8b731aae 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -33,121 +33,121 @@ // Use one of these or SDCard-based Emulation will be used //#define I2C_EEPROM -//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation -//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation +//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation +//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation -#define TP // Enable to define servo and probe pins +#define TP // Enable to define servo and probe pins // // Servos // #if ENABLED(TP) - #define SERVO0_PIN PB11 + #define SERVO0_PIN PB11 #endif -#define PS_ON_PIN PH6 +#define PS_ON_PIN PH6 // // Limit Switches // -#define X_MIN_PIN PF2 -#define X_MAX_PIN PG14 -#define Y_MIN_PIN PC13 -#define Y_MAX_PIN PG9 -#define Z_MIN_PIN PE0 -#define Z_MAX_PIN PD3 +#define X_MIN_PIN PF2 +#define X_MAX_PIN PG14 +#define Y_MIN_PIN PC13 +#define Y_MAX_PIN PG9 +#define Z_MIN_PIN PE0 +#define Z_MAX_PIN PD3 // // Pins on the extender // -//#define X_MIN_PIN PI4 -//#define X2_MIN_PIN PF12 -//#define Y_MIN_PIN PF4 -//#define Y2_MIN_PIN PI7 -//#define Z_MIN_PIN PF6 +//#define X_MIN_PIN PI4 +//#define X2_MIN_PIN PF12 +//#define Y_MIN_PIN PF4 +//#define Y2_MIN_PIN PI7 +//#define Z_MIN_PIN PF6 #if ENABLED(TP) && !defined(Z_MIN_PROBE_PIN) - #define Z_MIN_PROBE_PIN PH11 // Z Probe must be PH11 + #define Z_MIN_PROBE_PIN PH11 // Z Probe must be PH11 #endif // // Steppers // -#define X_STEP_PIN PC15 -#define X_DIR_PIN PF0 -#define X_ENABLE_PIN PF1 +#define X_STEP_PIN PC15 +#define X_DIR_PIN PF0 +#define X_ENABLE_PIN PF1 #ifndef X_CS_PIN - #define X_CS_PIN PC14 + #define X_CS_PIN PC14 #endif -#define Y_STEP_PIN PE3 -#define Y_DIR_PIN PE2 -#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE3 +#define Y_DIR_PIN PE2 +#define Y_ENABLE_PIN PE4 #ifndef Y_CS_PIN - #define Y_CS_PIN PE1 + #define Y_CS_PIN PE1 #endif -#define Z_STEP_PIN PB8 -#define Z_DIR_PIN PB7 // PB7 -#define Z_ENABLE_PIN PB9 +#define Z_STEP_PIN PB8 +#define Z_DIR_PIN PB7 // PB7 +#define Z_ENABLE_PIN PB9 #ifndef Z_CS_PIN - #define Z_CS_PIN PB5 + #define Z_CS_PIN PB5 #endif -#define E0_STEP_PIN PG12 -#define E0_DIR_PIN PG11 -#define E0_ENABLE_PIN PG13 +#define E0_STEP_PIN PG12 +#define E0_DIR_PIN PG11 +#define E0_ENABLE_PIN PG13 #ifndef E0_CS_PIN - #define E0_CS_PIN PG10 + #define E0_CS_PIN PG10 #endif -#define E1_STEP_PIN PD6 -#define E1_DIR_PIN PD5 -#define E1_ENABLE_PIN PD7 +#define E1_STEP_PIN PD6 +#define E1_DIR_PIN PD5 +#define E1_ENABLE_PIN PD7 #ifndef E1_CS_PIN - #define E1_CS_PIN PD4 + #define E1_CS_PIN PD4 #endif -#define E2_STEP_PIN PD1 -#define E2_DIR_PIN PD0 -#define E2_ENABLE_PIN PD2 +#define E2_STEP_PIN PD1 +#define E2_DIR_PIN PD0 +#define E2_ENABLE_PIN PD2 #ifndef E2_CS_PIN - #define E2_CS_PIN PC12 + #define E2_CS_PIN PC12 #endif -#define E3_STEP_PIN PF3 -#define E3_DIR_PIN PG3 -#define E3_ENABLE_PIN PF8 +#define E3_STEP_PIN PF3 +#define E3_DIR_PIN PG3 +#define E3_ENABLE_PIN PF8 #ifndef E3_CS_PIN - #define E3_CS_PIN PG4 + #define E3_CS_PIN PG4 #endif -#define E4_STEP_PIN PD14 -#define E4_DIR_PIN PD11 -#define E4_ENABLE_PIN PG2 +#define E4_STEP_PIN PD14 +#define E4_DIR_PIN PD11 +#define E4_ENABLE_PIN PG2 #ifndef E4_CS_PIN - #define E4_CS_PIN PE15 + #define E4_CS_PIN PE15 #endif -#define E5_STEP_PIN PE12 -#define E5_DIR_PIN PE10 -#define E5_ENABLE_PIN PF14 +#define E5_STEP_PIN PE12 +#define E5_DIR_PIN PE10 +#define E5_ENABLE_PIN PF14 #ifndef E5_CS_PIN - #define E5_CS_PIN PE7 + #define E5_CS_PIN PE7 #endif -#define E6_STEP_PIN PG0 -#define E6_DIR_PIN PG1 -#define E6_ENABLE_PIN PE8 +#define E6_STEP_PIN PG0 +#define E6_DIR_PIN PG1 +#define E6_ENABLE_PIN PE8 #ifndef E6_CS_PIN - #define E6_CS_PIN PF15 + #define E6_CS_PIN PF15 #endif -#define E7_STEP_PIN PH12 -#define E7_DIR_PIN PH15 -#define E7_ENABLE_PIN PI0 +#define E7_STEP_PIN PH12 +#define E7_DIR_PIN PH15 +#define E7_ENABLE_PIN PI0 #ifndef E7_CS_PIN - #define E7_CS_PIN PH14 + #define E7_CS_PIN PH14 #endif // @@ -155,13 +155,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PG15 + #define TMC_SW_MOSI PG15 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PB6 + #define TMC_SW_MISO PB6 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PB3 + #define TMC_SW_SCK PB3 #endif #endif @@ -190,38 +190,38 @@ // // Software serial // - #define X_SERIAL_TX_PIN PC14 - #define X_SERIAL_RX_PIN PC14 + #define X_SERIAL_TX_PIN PC14 + #define X_SERIAL_RX_PIN PC14 - #define Y_SERIAL_TX_PIN PE1 - #define Y_SERIAL_RX_PIN PE1 + #define Y_SERIAL_TX_PIN PE1 + #define Y_SERIAL_RX_PIN PE1 - #define Z_SERIAL_TX_PIN PB5 - #define Z_SERIAL_RX_PIN PB5 + #define Z_SERIAL_TX_PIN PB5 + #define Z_SERIAL_RX_PIN PB5 - #define E0_SERIAL_TX_PIN PG10 - #define E0_SERIAL_RX_PIN PG10 + #define E0_SERIAL_TX_PIN PG10 + #define E0_SERIAL_RX_PIN PG10 - #define E1_SERIAL_TX_PIN PD4 - #define E1_SERIAL_RX_PIN PD4 + #define E1_SERIAL_TX_PIN PD4 + #define E1_SERIAL_RX_PIN PD4 - #define E2_SERIAL_TX_PIN PC12 - #define E2_SERIAL_RX_PIN PC12 + #define E2_SERIAL_TX_PIN PC12 + #define E2_SERIAL_RX_PIN PC12 - #define E3_SERIAL_TX_PIN PG4 - #define E3_SERIAL_RX_PIN PG4 + #define E3_SERIAL_TX_PIN PG4 + #define E3_SERIAL_RX_PIN PG4 - #define E4_SERIAL_TX_PIN PE15 - #define E4_SERIAL_RX_PIN PE15 + #define E4_SERIAL_TX_PIN PE15 + #define E4_SERIAL_RX_PIN PE15 - #define E5_SERIAL_TX_PIN PE7 - #define E5_SERIAL_RX_PIN PE7 + #define E5_SERIAL_TX_PIN PE7 + #define E5_SERIAL_RX_PIN PE7 - #define E6_SERIAL_TX_PIN PF15 - #define E6_SERIAL_RX_PIN PF15 + #define E6_SERIAL_TX_PIN PF15 + #define E6_SERIAL_RX_PIN PF15 - #define E7_SERIAL_TX_PIN PH14 - #define E7_SERIAL_RX_PIN PH14 + #define E7_SERIAL_TX_PIN PH14 + #define E7_SERIAL_RX_PIN PH14 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -230,75 +230,75 @@ // // Temperature Sensors // -#define TEMP_0_PIN PC1 // T1 <-> E0 -#define TEMP_1_PIN PC2 // T2 <-> E1 -#define TEMP_2_PIN PC3 // T3 <-> E2 +#define TEMP_0_PIN PC1 // T1 <-> E0 +#define TEMP_1_PIN PC2 // T2 <-> E1 +#define TEMP_2_PIN PC3 // T3 <-> E2 -#define TEMP_3_PIN PA3 // T4 <-> E3 -#define TEMP_4_PIN PF9 // T5 <-> E4 -#define TEMP_5_PIN PF10 // T6 <-> E5 -#define TEMP_6_PIN PF7 // T7 <-> E6 -#define TEMP_7_PIN PF5 // T8 <-> E7 +#define TEMP_3_PIN PA3 // T4 <-> E3 +#define TEMP_4_PIN PF9 // T5 <-> E4 +#define TEMP_5_PIN PF10 // T6 <-> E5 +#define TEMP_6_PIN PF7 // T7 <-> E6 +#define TEMP_7_PIN PF5 // T8 <-> E7 -#define TEMP_BED_PIN PC0 // T0 <-> Bed +#define TEMP_BED_PIN PC0 // T0 <-> Bed // SPI for Max6675 or Max31855 Thermocouple // Uses a separate SPI bus // If you have a two-way thermocouple, you can customize two THERMO_CSx_PIN pins (x:1~2) -#define THERMO_SCK_PIN PI1 // SCK -#define THERMO_DO_PIN PI2 // MISO -#define THERMO_CS1_PIN PH9 // CS1 -#define THERMO_CS2_PIN PH2 // CS2 +#define THERMO_SCK_PIN PI1 // SCK +#define THERMO_DO_PIN PI2 // MISO +#define THERMO_CS1_PIN PH9 // CS1 +#define THERMO_CS2_PIN PH2 // CS2 -#define MAX6675_SS_PIN THERMO_CS1_PIN -#define MAX6675_SS2_PIN THERMO_CS2_PIN -#define MAX6675_SCK_PIN THERMO_SCK_PIN -#define MAX6675_DO_PIN THERMO_DO_PIN +#define MAX6675_SS_PIN THERMO_CS1_PIN +#define MAX6675_SS2_PIN THERMO_CS2_PIN +#define MAX6675_SCK_PIN THERMO_SCK_PIN +#define MAX6675_DO_PIN THERMO_DO_PIN // // Heaters / Fans // -#define HEATER_0_PIN PB1 // Heater0 -#define HEATER_1_PIN PA1 // Heater1 -#define HEATER_2_PIN PB0 // Heater2 +#define HEATER_0_PIN PB1 // Heater0 +#define HEATER_1_PIN PA1 // Heater1 +#define HEATER_2_PIN PB0 // Heater2 -#define HEATER_3_PIN PD15 // Heater3 -#define HEATER_4_PIN PD13 // Heater4 -#define HEATER_5_PIN PD12 // Heater5 -#define HEATER_6_PIN PE13 // Heater6 -#define HEATER_7_PIN PI6 // Heater7 +#define HEATER_3_PIN PD15 // Heater3 +#define HEATER_4_PIN PD13 // Heater4 +#define HEATER_5_PIN PD12 // Heater5 +#define HEATER_6_PIN PE13 // Heater6 +#define HEATER_7_PIN PI6 // Heater7 -#define HEATER_BED_PIN PA2 // Hotbed +#define HEATER_BED_PIN PA2 // Hotbed -#define FAN_PIN PE5 // Fan0 -#define FAN1_PIN PE6 // Fan1 -#define FAN2_PIN PC8 // Fan2 +#define FAN_PIN PE5 // Fan0 +#define FAN1_PIN PE6 // Fan1 +#define FAN2_PIN PC8 // Fan2 -#define FAN3_PIN PI5 // Fan3 -#define FAN4_PIN PE9 // Fan4 -#define FAN5_PIN PE11 // Fan5 -//#define FAN6_PIN PC9 // Fan6 -//#define FAN7_PIN PE14 // Fan7 +#define FAN3_PIN PI5 // Fan3 +#define FAN4_PIN PE9 // Fan4 +#define FAN5_PIN PE11 // Fan5 +//#define FAN6_PIN PC9 // Fan6 +//#define FAN7_PIN PE14 // Fan7 // // By default the onboard SD (SPI1) is enabled // #define CUSTOM_SPI_PINS #if DISABLED(CUSTOM_SPI_PINS) - #define SDSS PB12 + #define SDSS PB12 #endif // HAL SPI1 pins group #if ENABLED(CUSTOM_SPI_PINS) - #define SDSS PA4 - #define SD_DETECT_PIN PC4 - #define LCD_SDSS PA4 + #define SDSS PA4 + #define SD_DETECT_PIN PC4 + #define LCD_SDSS PA4 - #define SCK_PIN PA5 - #define MISO_PIN PA6 - #define MOSI_PIN PA7 - #define SS_PIN PA4 // Chip select for SD card used by Marlin + #define SCK_PIN PA5 + #define MISO_PIN PA6 + #define MOSI_PIN PA7 + #define SS_PIN PA4 // Chip select for SD card used by Marlin #endif /** @@ -316,18 +316,18 @@ // LCDs and Controllers // #if HAS_SPI_LCD - #define BEEPER_PIN PC11 - #define BTN_ENC PA15 + #define BEEPER_PIN PC11 + #define BTN_ENC PA15 #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS PA8 + #define LCD_PINS_RS PA8 - #define BTN_EN1 PD10 - #define BTN_EN2 PH10 + #define BTN_EN1 PD10 + #define BTN_EN2 PH10 - #define LCD_PINS_ENABLE PG7 - #define LCD_PINS_D4 PG8 + #define LCD_PINS_ENABLE PG7 + #define LCD_PINS_D4 PG8 //#undef ST7920_DELAY_1 //#undef ST7920_DELAY_2 @@ -335,43 +335,43 @@ #else - #define LCD_PINS_RS PA8 + #define LCD_PINS_RS PA8 - #define BTN_EN1 PD10 - #define BTN_EN2 PH10 + #define BTN_EN1 PD10 + #define BTN_EN2 PH10 #if DISABLED(CUSTOM_SPI_PINS) - #define SD_DETECT_PIN PB10 - #define LCD_SDSS PB12 + #define SD_DETECT_PIN PB10 + #define LCD_SDSS PB12 #endif - #define LCD_PINS_ENABLE PC10 - #define LCD_PINS_D4 PG8 + #define LCD_PINS_ENABLE PC10 + #define LCD_PINS_D4 PG8 #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS PC10 - #define DOGLCD_A0 PA8 - //#define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN PG8 // Must be high or open for LCD to operate normally. + #define DOGLCD_CS PC10 + #define DOGLCD_A0 PA8 + //#define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PG8 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PG7 + #define RGB_LED_R_PIN PG7 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PG6 + #define RGB_LED_G_PIN PG6 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PG5 + #define RGB_LED_B_PIN PG5 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN PF13 + #define NEOPIXEL_PIN PF13 #endif #endif // !FYSETC_MINI_12864 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PG7 - #define LCD_PINS_D6 PG6 - #define LCD_PINS_D7 PG5 + #define LCD_PINS_D5 PG7 + #define LCD_PINS_D6 PG6 + #define LCD_PINS_D7 PG5 #endif #endif @@ -383,9 +383,9 @@ #define BOARD_ST7920_DELAY_3 DELAY_NS(600) #endif - //#define DOGLCD_CS PB12 - //#define DOGLCD_A0 PA8 - //#define LCD_PINS_DC PB14 - //#define DOGLCD_MOSI PB15 + //#define DOGLCD_CS PB12 + //#define DOGLCD_A0 PA8 + //#define LCD_PINS_DC PB14 + //#define DOGLCD_MOSI PB15 #endif // HAS_SPI_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h index 3376a99711..4dbdf0e77f 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_V1_1.h @@ -30,74 +30,74 @@ #define BOARD_INFO_NAME "BIGTREE SKR Pro 1.1" // redefined? // Use one of these or SDCard-based Emulation will be used -//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation -//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation +//#define SRAM_EEPROM_EMULATION // Use BackSRAM-based EEPROM emulation +//#define FLASH_EEPROM_EMULATION // Use Flash-based EEPROM emulation // // Servos // -#define SERVO0_PIN PA1 +#define SERVO0_PIN PA1 // // Limit Switches // -#define X_MIN_PIN PB10 -#define X_MAX_PIN PE15 -#define Y_MIN_PIN PE12 -#define Y_MAX_PIN PE10 -#define Z_MIN_PIN PG8 -#define Z_MAX_PIN PG5 +#define X_MIN_PIN PB10 +#define X_MAX_PIN PE15 +#define Y_MIN_PIN PE12 +#define Y_MAX_PIN PE10 +#define Z_MIN_PIN PG8 +#define Z_MAX_PIN PG5 // // Z Probe must be this pins // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN PA2 + #define Z_MIN_PROBE_PIN PA2 #endif // // Steppers // -#define X_STEP_PIN PE9 -#define X_DIR_PIN PF1 -#define X_ENABLE_PIN PF2 +#define X_STEP_PIN PE9 +#define X_DIR_PIN PF1 +#define X_ENABLE_PIN PF2 #ifndef X_CS_PIN - #define X_CS_PIN PA15 + #define X_CS_PIN PA15 #endif -#define Y_STEP_PIN PE11 -#define Y_DIR_PIN PE8 -#define Y_ENABLE_PIN PD7 +#define Y_STEP_PIN PE11 +#define Y_DIR_PIN PE8 +#define Y_ENABLE_PIN PD7 #ifndef Y_CS_PIN - #define Y_CS_PIN PB8 + #define Y_CS_PIN PB8 #endif -#define Z_STEP_PIN PE13 -#define Z_DIR_PIN PC2 -#define Z_ENABLE_PIN PC0 +#define Z_STEP_PIN PE13 +#define Z_DIR_PIN PC2 +#define Z_ENABLE_PIN PC0 #ifndef Z_CS_PIN - #define Z_CS_PIN PB9 + #define Z_CS_PIN PB9 #endif -#define E0_STEP_PIN PE14 -#define E0_DIR_PIN PA0 -#define E0_ENABLE_PIN PC3 +#define E0_STEP_PIN PE14 +#define E0_DIR_PIN PA0 +#define E0_ENABLE_PIN PC3 #ifndef E0_CS_PIN - #define E0_CS_PIN PB3 + #define E0_CS_PIN PB3 #endif -#define E1_STEP_PIN PD15 -#define E1_DIR_PIN PE7 -#define E1_ENABLE_PIN PA3 +#define E1_STEP_PIN PD15 +#define E1_DIR_PIN PE7 +#define E1_ENABLE_PIN PA3 #ifndef E1_CS_PIN - #define E1_CS_PIN PG15 + #define E1_CS_PIN PG15 #endif -#define E2_STEP_PIN PD13 -#define E2_DIR_PIN PG9 -#define E2_ENABLE_PIN PF0 +#define E2_STEP_PIN PD13 +#define E2_DIR_PIN PG9 +#define E2_ENABLE_PIN PF0 #ifndef E2_CS_PIN - #define E2_CS_PIN PG12 + #define E2_CS_PIN PG12 #endif // @@ -105,13 +105,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PC12 + #define TMC_SW_MOSI PC12 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PC11 + #define TMC_SW_MISO PC11 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PC10 + #define TMC_SW_SCK PC10 #endif #endif @@ -137,23 +137,23 @@ // // Software serial // - #define X_SERIAL_TX_PIN PC13 - #define X_SERIAL_RX_PIN PC13 + #define X_SERIAL_TX_PIN PC13 + #define X_SERIAL_RX_PIN PC13 - #define Y_SERIAL_TX_PIN PE3 - #define Y_SERIAL_RX_PIN PE3 + #define Y_SERIAL_TX_PIN PE3 + #define Y_SERIAL_RX_PIN PE3 - #define Z_SERIAL_TX_PIN PE1 - #define Z_SERIAL_RX_PIN PE1 + #define Z_SERIAL_TX_PIN PE1 + #define Z_SERIAL_RX_PIN PE1 - #define E0_SERIAL_TX_PIN PD4 - #define E0_SERIAL_RX_PIN PD4 + #define E0_SERIAL_TX_PIN PD4 + #define E0_SERIAL_RX_PIN PD4 - #define E1_SERIAL_TX_PIN PD1 - #define E1_SERIAL_RX_PIN PD1 + #define E1_SERIAL_TX_PIN PD1 + #define E1_SERIAL_RX_PIN PD1 - #define E2_SERIAL_TX_PIN PD6 - #define E2_SERIAL_RX_PIN PD6 + #define E2_SERIAL_TX_PIN PD6 + #define E2_SERIAL_RX_PIN PD6 // Reduce baud rate to improve software serial reliability #define TMC_BAUD_RATE 19200 @@ -162,28 +162,28 @@ // // Temperature Sensors // -#define TEMP_0_PIN PF4 // T1 <-> E0 -#define TEMP_1_PIN PF5 // T2 <-> E1 -#define TEMP_2_PIN PF6 // T3 <-> E2 -#define TEMP_BED_PIN PF3 // T0 <-> Bed +#define TEMP_0_PIN PF4 // T1 <-> E0 +#define TEMP_1_PIN PF5 // T2 <-> E1 +#define TEMP_2_PIN PF6 // T3 <-> E2 +#define TEMP_BED_PIN PF3 // T0 <-> Bed // // Heaters / Fans // -#define HEATER_0_PIN PB1 // Heater0 -#define HEATER_1_PIN PD14 // Heater1 -#define HEATER_2_PIN PB0 // Heater1 -#define HEATER_BED_PIN PD12 // Hotbed -#define FAN_PIN PC8 // Fan0 -#define FAN1_PIN PE5 // Fan1 -#define FAN2_PIN PE6 // Fan2 +#define HEATER_0_PIN PB1 // Heater0 +#define HEATER_1_PIN PD14 // Heater1 +#define HEATER_2_PIN PB0 // Heater1 +#define HEATER_BED_PIN PD12 // Hotbed +#define FAN_PIN PC8 // Fan0 +#define FAN1_PIN PE5 // Fan1 +#define FAN2_PIN PE6 // Fan2 // // Misc. Functions // #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION LCD + #define SDCARD_CONNECTION LCD #endif // @@ -191,16 +191,15 @@ // NOT compatible with LCD // #if SDCARD_CONNECTION == ONBOARD && !HAS_SPI_LCD - #define SOFTWARE_SPI // Use soft SPI for onboard SD - #define SDSS PA4 - #define SCK_PIN PA5 - #define MISO_PIN PA6 - #define MOSI_PIN PB5 + #define SOFTWARE_SPI // Use soft SPI for onboard SD + #define SDSS PA4 + #define SCK_PIN PA5 + #define MISO_PIN PA6 + #define MOSI_PIN PB5 #else - #define SDSS PB12 + #define SDSS PB12 #endif - /** * _____ _____ * NC | · · | GND 5V | · · | GND @@ -216,17 +215,17 @@ // LCDs and Controllers // #if HAS_SPI_LCD - #define BEEPER_PIN PG4 - #define BTN_ENC PA8 + #define BEEPER_PIN PG4 + #define BTN_ENC PA8 #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS PG6 + #define LCD_PINS_RS PG6 - #define BTN_EN1 PD11 - #define BTN_EN2 PG2 + #define BTN_EN1 PD11 + #define BTN_EN2 PG2 - #define LCD_PINS_ENABLE PG7 - #define LCD_PINS_D4 PG3 + #define LCD_PINS_ENABLE PG7 + #define LCD_PINS_D4 PG3 // CR10_Stock Display needs a different delay setting on SKR PRO v1.1, so undef it here. // It will be defined again at the #HAS_GRAPHICAL_LCD section below. @@ -234,44 +233,43 @@ #undef ST7920_DELAY_2 #undef ST7920_DELAY_3 - #else - #define LCD_PINS_RS PD10 + #define LCD_PINS_RS PD10 - #define BTN_EN1 PG10 - #define BTN_EN2 PF11 - #define SD_DETECT_PIN PF12 + #define BTN_EN1 PG10 + #define BTN_EN2 PF11 + #define SD_DETECT_PIN PF12 - #define LCD_SDSS PB12 + #define LCD_SDSS PB12 - #define LCD_PINS_ENABLE PD11 - #define LCD_PINS_D4 PG2 + #define LCD_PINS_ENABLE PD11 + #define LCD_PINS_D4 PG2 #if ENABLED(FYSETC_MINI_12864) - #define DOGLCD_CS PD11 - #define DOGLCD_A0 PD10 - //#define LCD_BACKLIGHT_PIN -1 - #define LCD_RESET_PIN PG2 // Must be high or open for LCD to operate normally. + #define DOGLCD_CS PD11 + #define DOGLCD_A0 PD10 + //#define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PG2 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PG3 + #define RGB_LED_R_PIN PG3 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PG6 + #define RGB_LED_G_PIN PG6 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PG7 + #define RGB_LED_B_PIN PG7 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN PG3 + #define NEOPIXEL_PIN PG3 #endif #endif // !FYSETC_MINI_12864 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PG3 - #define LCD_PINS_D6 PG6 - #define LCD_PINS_D7 PG7 + #define LCD_PINS_D5 PG3 + #define LCD_PINS_D6 PG6 + #define LCD_PINS_D7 PG7 #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h index 8c8ea2adc1..8205cd9f4d 100644 --- a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h +++ b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h @@ -32,147 +32,147 @@ #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #undef E2END -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB // // Servos // -#define SERVO0_PIN PE11 +#define SERVO0_PIN PE11 // // Limit Switches // -#define X_MIN_PIN PC3 -#define X_MAX_PIN PC2 -#define Y_MIN_PIN PF2 -#define Y_MAX_PIN PF1 -#define Z_MIN_PIN PF0 -#define Z_MAX_PIN PC15 +#define X_MIN_PIN PC3 +#define X_MAX_PIN PC2 +#define Y_MIN_PIN PF2 +#define Y_MAX_PIN PF1 +#define Z_MIN_PIN PF0 +#define Z_MAX_PIN PC15 // // Z Probe (when not Z_MIN_PIN) // -#define Z_MIN_PROBE_PIN PC14 // Z3_PIN +#define Z_MIN_PROBE_PIN PC14 // Z3_PIN // // Steppers // -#define X_STEP_PIN PB9 -#define X_DIR_PIN PE0 -#define X_ENABLE_PIN PE1 +#define X_STEP_PIN PB9 +#define X_DIR_PIN PE0 +#define X_ENABLE_PIN PE1 #ifndef X_CS_PIN - #define X_CS_PIN PG13 + #define X_CS_PIN PG13 #endif -#define Y_STEP_PIN PB8 -#define Y_DIR_PIN PG11 -#define Y_ENABLE_PIN PG12 +#define Y_STEP_PIN PB8 +#define Y_DIR_PIN PG11 +#define Y_ENABLE_PIN PG12 #ifndef Y_CS_PIN - #define Y_CS_PIN PG10 + #define Y_CS_PIN PG10 #endif -#define Z_STEP_PIN PA8 -#define Z_DIR_PIN PD6 -#define Z_ENABLE_PIN PD7 +#define Z_STEP_PIN PA8 +#define Z_DIR_PIN PD6 +#define Z_ENABLE_PIN PD7 #ifndef Z_CS_PIN - #define Z_CS_PIN PD5 + #define Z_CS_PIN PD5 #endif -#define E0_STEP_PIN PC7 -#define E0_DIR_PIN PD3 -#define E0_ENABLE_PIN PD4 +#define E0_STEP_PIN PC7 +#define E0_DIR_PIN PD3 +#define E0_ENABLE_PIN PD4 #ifndef E0_CS_PIN - #define E0_CS_PIN PD1 + #define E0_CS_PIN PD1 #endif -#define E1_STEP_PIN PC6 -#define E1_DIR_PIN PA15 -#define E1_ENABLE_PIN PD0 +#define E1_STEP_PIN PC6 +#define E1_DIR_PIN PA15 +#define E1_ENABLE_PIN PD0 #ifndef E1_CS_PIN - #define E1_CS_PIN PA14 + #define E1_CS_PIN PA14 #endif -#define E2_STEP_PIN PD15 -#define E2_DIR_PIN PG7 -#define E2_ENABLE_PIN PG8 +#define E2_STEP_PIN PD15 +#define E2_DIR_PIN PG7 +#define E2_ENABLE_PIN PG8 #ifndef E2_CS_PIN - #define E2_CS_PIN PG6 + #define E2_CS_PIN PG6 #endif -#define E3_STEP_PIN PD14 -#define E3_DIR_PIN PG4 -#define E3_ENABLE_PIN PG5 +#define E3_STEP_PIN PD14 +#define E3_DIR_PIN PG4 +#define E3_ENABLE_PIN PG5 #ifndef E3_CS_PIN - #define E3_CS_PIN PG3 + #define E3_CS_PIN PG3 #endif -#define E4_STEP_PIN PD13 -#define E4_DIR_PIN PD11 -#define E4_ENABLE_PIN PG2 +#define E4_STEP_PIN PD13 +#define E4_DIR_PIN PD11 +#define E4_ENABLE_PIN PG2 #ifndef E4_CS_PIN - #define E4_CS_PIN PD10 + #define E4_CS_PIN PD10 #endif -#define E5_STEP_PIN PD12 -#define E5_DIR_PIN PD8 -#define E5_ENABLE_PIN PD9 +#define E5_STEP_PIN PD12 +#define E5_DIR_PIN PD8 +#define E5_ENABLE_PIN PD9 #ifndef E5_CS_PIN - #define E5_CS_PIN PB12 + #define E5_CS_PIN PB12 #endif // // Temperature Sensors // -#define TEMP_0_PIN PA0 // Analog Input -#define TEMP_1_PIN PC1 // Analog Input -#define TEMP_2_PIN PC0 // Analog Input -#define TEMP_3_PIN PF10 // Analog Input -#define TEMP_4_PIN PF5 // Analog Input -#define TEMP_5_PIN PF4 // Analog Input -#define TEMP_BED_PIN PF3 // Analog Input +#define TEMP_0_PIN PA0 // Analog Input +#define TEMP_1_PIN PC1 // Analog Input +#define TEMP_2_PIN PC0 // Analog Input +#define TEMP_3_PIN PF10 // Analog Input +#define TEMP_4_PIN PF5 // Analog Input +#define TEMP_5_PIN PF4 // Analog Input +#define TEMP_BED_PIN PF3 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN PF7 -#define HEATER_1_PIN PF6 -#define HEATER_2_PIN PE6 -#define HEATER_3_PIN PE5 -#define HEATER_4_PIN PE4 -#define HEATER_5_PIN PA2 -#define HEATER_BED_PIN PE2 +#define HEATER_0_PIN PF7 +#define HEATER_1_PIN PF6 +#define HEATER_2_PIN PE6 +#define HEATER_3_PIN PE5 +#define HEATER_4_PIN PE4 +#define HEATER_5_PIN PA2 +#define HEATER_BED_PIN PE2 #ifndef FAN_PIN - #define FAN_PIN PF8 + #define FAN_PIN PF8 #endif -#define FAN1_PIN PF9 -#define FAN2_PIN PE3 -#define FAN3_PIN PA1 -#define FAN4_PIN PE13 -#define FAN5_PIN PB11 +#define FAN1_PIN PF9 +#define FAN2_PIN PE3 +#define FAN3_PIN PA1 +#define FAN4_PIN PE13 +#define FAN5_PIN PB11 // // Onboard SD support // -#define SDIO_D0_PIN PC8 -#define SDIO_D1_PIN PC9 -//#define SD_CARD_DETECT_PIN PC13 -#define SDIO_D2_PIN PC10 -#define SDIO_D3_PIN PC11 -#define SDIO_CK_PIN PC12 -#define SDIO_CMD_PIN PD2 +#define SDIO_D0_PIN PC8 +#define SDIO_D1_PIN PC9 +//#define SD_CARD_DETECT_PIN PC13 +#define SDIO_D2_PIN PC10 +#define SDIO_D3_PIN PC11 +#define SDIO_CK_PIN PC12 +#define SDIO_CMD_PIN PD2 #if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD - #define SDIO_SUPPORT // Use SDIO for onboard SD + #define SDIO_SUPPORT // Use SDIO for onboard SD #ifndef SDIO_SUPPORT - #define SOFTWARE_SPI // Use soft SPI for onboard SD - #define SDSS SDIO_D3_PIN - #define SCK_PIN SDIO_CK_PIN - #define MISO_PIN SDIO_D0_PIN - #define MOSI_PIN SDIO_CMD_PIN + #define SOFTWARE_SPI // Use soft SPI for onboard SD + #define SDSS SDIO_D3_PIN + #define SCK_PIN SDIO_CK_PIN + #define MISO_PIN SDIO_D0_PIN + #define MOSI_PIN SDIO_CMD_PIN #endif #endif @@ -182,13 +182,13 @@ #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PB15 + #define TMC_SW_MOSI PB15 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PB14 + #define TMC_SW_MISO PB14 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PB13 + #define TMC_SW_SCK PB13 #endif #endif @@ -197,70 +197,69 @@ // #if HAS_TMC_UART - #define X_SERIAL_TX_PIN PG13 - #define X_SERIAL_RX_PIN PG13 + #define X_SERIAL_TX_PIN PG13 + #define X_SERIAL_RX_PIN PG13 - #define Y_SERIAL_TX_PIN PG10 - #define Y_SERIAL_RX_PIN PG10 + #define Y_SERIAL_TX_PIN PG10 + #define Y_SERIAL_RX_PIN PG10 - #define Z_SERIAL_TX_PIN PD5 - #define Z_SERIAL_RX_PIN PD5 + #define Z_SERIAL_TX_PIN PD5 + #define Z_SERIAL_RX_PIN PD5 - #define E0_SERIAL_TX_PIN PD1 - #define E0_SERIAL_RX_PIN PD1 + #define E0_SERIAL_TX_PIN PD1 + #define E0_SERIAL_RX_PIN PD1 - #define E1_SERIAL_TX_PIN PA14 - #define E1_SERIAL_RX_PIN PA14 + #define E1_SERIAL_TX_PIN PA14 + #define E1_SERIAL_RX_PIN PA14 - #define E2_SERIAL_TX_PIN PG6 - #define E2_SERIAL_RX_PIN PG6 + #define E2_SERIAL_TX_PIN PG6 + #define E2_SERIAL_RX_PIN PG6 - #define E3_SERIAL_TX_PIN PG3 - #define E3_SERIAL_RX_PIN PG3 + #define E3_SERIAL_TX_PIN PG3 + #define E3_SERIAL_RX_PIN PG3 - #define E4_SERIAL_TX_PIN PD10 - #define E4_SERIAL_RX_PIN PD10 + #define E4_SERIAL_TX_PIN PD10 + #define E4_SERIAL_RX_PIN PD10 - #define E5_SERIAL_TX_PIN PB12 - #define E5_SERIAL_RX_PIN PB12 + #define E5_SERIAL_TX_PIN PB12 + #define E5_SERIAL_RX_PIN PB12 #endif - // // LCD / Controller // -#define SCK_PIN PB13 -#define MISO_PIN PB14 -#define MOSI_PIN PB15 -#define SDSS PF11 -#define SD_DETECT_PIN PB2 -#define BEEPER_PIN PB10 -#define LCD_PINS_RS PE12 -#define LCD_PINS_ENABLE PE14 -#define LCD_PINS_D4 PE10 -#define LCD_PINS_D5 PE9 -#define LCD_PINS_D6 PE8 -#define LCD_PINS_D7 PE7 -#define BTN_EN1 PC4 -#define BTN_EN2 PC5 -#define BTN_ENC PE15 +#define SCK_PIN PB13 +#define MISO_PIN PB14 +#define MOSI_PIN PB15 +#define SDSS PF11 +#define SD_DETECT_PIN PB2 +#define BEEPER_PIN PB10 +#define LCD_PINS_RS PE12 +#define LCD_PINS_ENABLE PE14 +#define LCD_PINS_D4 PE10 +#define LCD_PINS_D5 PE9 +#define LCD_PINS_D6 PE8 +#define LCD_PINS_D7 PE7 +#define BTN_EN1 PC4 +#define BTN_EN2 PC5 +#define BTN_ENC PE15 // // Filament runout // -#define FIL_RUNOUT_PIN PA3 +#define FIL_RUNOUT_PIN PA3 // // ST7920 Delays // #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(96) + #define ST7920_DELAY_1 DELAY_NS(96) #endif #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(48) + #define ST7920_DELAY_2 DELAY_NS(48) #endif #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(715) + #define ST7920_DELAY_3 DELAY_NS(715) #endif diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index d135ef0750..bdadbe36c2 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -47,65 +47,65 @@ //#define SRAM_EEPROM_EMULATION //#define I2C_EEPROM #ifdef I2C_EEPROM - #undef E2END // Defined in Arduino Core STM32 to be used with EEPROM emulation. This board uses a real EEPROM. - #define E2END 0xFFF // 4KB + #undef E2END // Defined in Arduino Core STM32 to be used with EEPROM emulation. This board uses a real EEPROM. + #define E2END 0xFFF // 4KB #endif // // Servos // -#define SERVO0_PIN PA3 +#define SERVO0_PIN PA3 // // Limit Switches // -#define X_MIN_PIN PB14 -#define X_MAX_PIN PA1 -#define Y_MIN_PIN PB13 -#define Y_MAX_PIN PA2 -#define Z_MIN_PIN PA0 -#define Z_MAX_PIN PA3 +#define X_MIN_PIN PB14 +#define X_MAX_PIN PA1 +#define Y_MIN_PIN PB13 +#define Y_MAX_PIN PA2 +#define Z_MIN_PIN PA0 +#define Z_MAX_PIN PA3 // // Filament Sensor // share with X_MAX_PIN // #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA1 + #define FIL_RUNOUT_PIN PA1 #endif // // Steppers // -#define X_STEP_PIN PE11 -#define X_DIR_PIN PE10 -#define X_ENABLE_PIN PE12 -#define X_CS_PIN PE7 +#define X_STEP_PIN PE11 +#define X_DIR_PIN PE10 +#define X_ENABLE_PIN PE12 +#define X_CS_PIN PE7 -#define Y_STEP_PIN PD8 -#define Y_DIR_PIN PB12 -#define Y_ENABLE_PIN PD9 -#define Y_CS_PIN PE15 +#define Y_STEP_PIN PD8 +#define Y_DIR_PIN PB12 +#define Y_ENABLE_PIN PD9 +#define Y_CS_PIN PE15 -#define Z_STEP_PIN PD14 -#define Z_DIR_PIN PD13 -#define Z_ENABLE_PIN PD15 -#define Z_CS_PIN PD10 +#define Z_STEP_PIN PD14 +#define Z_DIR_PIN PD13 +#define Z_ENABLE_PIN PD15 +#define Z_CS_PIN PD10 -#define E0_STEP_PIN PD5 -#define E0_DIR_PIN PD6 -#define E0_ENABLE_PIN PD4 -#define E0_CS_PIN PD7 +#define E0_STEP_PIN PD5 +#define E0_DIR_PIN PD6 +#define E0_ENABLE_PIN PD4 +#define E0_CS_PIN PD7 -#define E1_STEP_PIN PE6 -#define E1_DIR_PIN PC13 -#define E1_ENABLE_PIN PE5 -#define E1_CS_PIN PC14 +#define E1_STEP_PIN PE6 +#define E1_DIR_PIN PC13 +#define E1_ENABLE_PIN PE5 +#define E1_CS_PIN PC14 -#define E2_STEP_PIN PE2 -#define E2_DIR_PIN PE4 -#define E2_ENABLE_PIN PE3 -#define E2_CS_PIN PC15 +#define E2_STEP_PIN PE2 +#define E2_DIR_PIN PE4 +#define E2_ENABLE_PIN PE3 +#define E2_CS_PIN PC15 #if HAS_TMC_UART // @@ -115,78 +115,78 @@ // // Software serial // - #define X_SERIAL_TX_PIN PE9 - #define X_SERIAL_RX_PIN PE8 + #define X_SERIAL_TX_PIN PE9 + #define X_SERIAL_RX_PIN PE8 - #define Y_SERIAL_TX_PIN PE14 - #define Y_SERIAL_RX_PIN PE13 + #define Y_SERIAL_TX_PIN PE14 + #define Y_SERIAL_RX_PIN PE13 - #define Z_SERIAL_TX_PIN PD11 - #define Z_SERIAL_RX_PIN PD12 + #define Z_SERIAL_TX_PIN PD11 + #define Z_SERIAL_RX_PIN PD12 - #define E0_SERIAL_TX_PIN PD3 - #define E0_SERIAL_RX_PIN PA15 + #define E0_SERIAL_TX_PIN PD3 + #define E0_SERIAL_RX_PIN PA15 - #define E1_SERIAL_TX_PIN PC4 - #define E1_SERIAL_RX_PIN PC5 + #define E1_SERIAL_TX_PIN PC4 + #define E1_SERIAL_RX_PIN PC5 - #define E2_SERIAL_TX_PIN PE1 - #define E2_SERIAL_RX_PIN PE0 + #define E2_SERIAL_TX_PIN PE1 + #define E2_SERIAL_RX_PIN PE0 #endif // // Temperature Sensors // -#define TEMP_0_PIN PC0 -#define TEMP_1_PIN PC1 -#define TEMP_2_PIN PC2 -#define TEMP_BED_PIN PC3 +#define TEMP_0_PIN PC0 +#define TEMP_1_PIN PC1 +#define TEMP_2_PIN PC2 +#define TEMP_BED_PIN PC3 // // Heaters / Fans // -#define HEATER_0_PIN PB3 -#define HEATER_1_PIN PB4 -#define HEATER_2_PIN PB15 -#define HEATER_BED_PIN PC8 +#define HEATER_0_PIN PB3 +#define HEATER_1_PIN PB4 +#define HEATER_2_PIN PB15 +#define HEATER_BED_PIN PC8 -#define FAN_PIN PB0 -#define FAN1_PIN PB1 -#define FAN2_PIN PB2 +#define FAN_PIN PB0 +#define FAN1_PIN PB1 +#define FAN2_PIN PB2 // // SPI // -#define SCK_PIN PA5 -#define MISO_PIN PA6 -#define MOSI_PIN PA7 +#define SCK_PIN PA5 +#define MISO_PIN PA6 +#define MOSI_PIN PA7 // // Misc. Functions // -//#define LED_PIN PB14 -//#define BTN_PIN PC10 -//#define PS_ON_PIN PE11 -//#define KILL_PIN PC5 +//#define LED_PIN PB14 +//#define BTN_PIN PC10 +//#define PS_ON_PIN PE11 +//#define KILL_PIN PC5 -#define SDSS PA4 -#define SD_DETECT_PIN PB10 +#define SDSS PA4 +#define SD_DETECT_PIN PB10 // // LCD / Controller // #if HAS_SPI_LCD - #define BEEPER_PIN PC9 - #define BTN_ENC PA8 + #define BEEPER_PIN PC9 + #define BTN_ENC PA8 #if ENABLED(CR10_STOCKDISPLAY) - #define LCD_PINS_RS PD0 + #define LCD_PINS_RS PD0 - #define BTN_EN1 PC11 - #define BTN_EN2 PC10 + #define BTN_EN1 PC11 + #define BTN_EN2 PC10 - #define LCD_PINS_ENABLE PD1 - #define LCD_PINS_D4 PC12 + #define LCD_PINS_ENABLE PD1 + #define LCD_PINS_D4 PC12 // CR10_Stock Display needs a different delay setting on SKR PRO v1.1, so undef it here. // It will be defined again at the #HAS_GRAPHICAL_LCD section below. @@ -196,43 +196,43 @@ #else - #define LCD_PINS_RS PD2 + #define LCD_PINS_RS PD2 - #define BTN_EN1 PC6 - #define BTN_EN2 PC7 + #define BTN_EN1 PC6 + #define BTN_EN2 PC7 - #define LCD_SDSS PA4 + #define LCD_SDSS PA4 - #define LCD_PINS_ENABLE PC11 - #define LCD_PINS_D4 PC10 + #define LCD_PINS_ENABLE PC11 + #define LCD_PINS_D4 PC10 #if ENABLED(FYSETC_MINI_12864) // See https://wiki.fysetc.com/Mini12864_Panel - #define DOGLCD_CS PC11 - #define DOGLCD_A0 PD2 + #define DOGLCD_CS PC11 + #define DOGLCD_A0 PD2 #if ENABLED(FYSETC_GENERIC_12864_1_1) - #define LCD_BACKLIGHT_PIN PD0 + #define LCD_BACKLIGHT_PIN PD0 #endif - #define LCD_RESET_PIN PC10 // Must be high or open for LCD to operate normally. + #define LCD_RESET_PIN PC10 // Must be high or open for LCD to operate normally. #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0) #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PC12 + #define RGB_LED_R_PIN PC12 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PD0 + #define RGB_LED_G_PIN PD0 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PD1 + #define RGB_LED_B_PIN PD1 #endif #elif ENABLED(FYSETC_MINI_12864_2_1) - #define NEOPIXEL_PIN PC12 + #define NEOPIXEL_PIN PC12 #endif #endif // !FYSETC_MINI_12864 #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PC12 - #define LCD_PINS_D6 PD0 - #define LCD_PINS_D7 PD1 + #define LCD_PINS_D5 PC12 + #define LCD_PINS_D6 PD0 + #define LCD_PINS_D7 PD1 #endif #endif @@ -240,27 +240,27 @@ // Alter timing for graphical display #if HAS_GRAPHICAL_LCD #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(96) + #define ST7920_DELAY_1 DELAY_NS(96) #endif #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(48) + #define ST7920_DELAY_2 DELAY_NS(48) #endif #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(600) + #define ST7920_DELAY_3 DELAY_NS(600) #endif #endif #endif // HAS_SPI_LCD #ifndef RGB_LED_R_PIN - #define RGB_LED_R_PIN PB6 + #define RGB_LED_R_PIN PB6 #endif #ifndef RGB_LED_G_PIN - #define RGB_LED_G_PIN PB5 + #define RGB_LED_G_PIN PB5 #endif #ifndef RGB_LED_B_PIN - #define RGB_LED_B_PIN PB7 + #define RGB_LED_B_PIN PB7 #endif #ifndef RGB_LED_W_PIN - #define RGB_LED_W_PIN -1 + #define RGB_LED_W_PIN -1 #endif diff --git a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h index 2909b7c538..924b94c4f1 100644 --- a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h +++ b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h @@ -37,7 +37,7 @@ //#define I2C_EEPROM #ifndef E2END - #define E2END 0xFFF // 4KB + #define E2END 0xFFF // 4KB #endif // Ignore temp readings during development. @@ -46,12 +46,12 @@ // // Limit Switches // -#define X_MIN_PIN PE0 -#define X_MAX_PIN -1 -#define Y_MIN_PIN PE1 -#define Y_MAX_PIN -1 -#define Z_MIN_PIN PE14 -#define Z_MAX_PIN -1 +#define X_MIN_PIN PE0 +#define X_MAX_PIN -1 +#define Y_MIN_PIN PE1 +#define Y_MAX_PIN -1 +#define Z_MIN_PIN PE14 +#define Z_MAX_PIN -1 // // Z Probe (when not Z_MIN_PIN) @@ -65,120 +65,119 @@ // Steppers // -#define X_STEP_PIN PD3 -#define X_DIR_PIN PD2 -#define X_ENABLE_PIN PD0 +#define X_STEP_PIN PD3 +#define X_DIR_PIN PD2 +#define X_ENABLE_PIN PD0 //#ifndef X_CS_PIN // #define X_CS_PIN PD1 //#endif -#define Y_STEP_PIN PE11 -#define Y_DIR_PIN PE10 -#define Y_ENABLE_PIN PE13 +#define Y_STEP_PIN PE11 +#define Y_DIR_PIN PE10 +#define Y_ENABLE_PIN PE13 //#ifndef Y_CS_PIN // #define Y_CS_PIN PE12 //#endif -#define Z_STEP_PIN PD6 -#define Z_DIR_PIN PD7 -#define Z_ENABLE_PIN PD4 +#define Z_STEP_PIN PD6 +#define Z_DIR_PIN PD7 +#define Z_ENABLE_PIN PD4 //#ifndef Z_CS_PIN // #define Z_CS_PIN PD5 //#endif -#define E0_STEP_PIN PB5 -#define E0_DIR_PIN PB6 -#define E0_ENABLE_PIN PB3 +#define E0_STEP_PIN PB5 +#define E0_DIR_PIN PB6 +#define E0_ENABLE_PIN PB3 //#ifndef E0_CS_PIN // #define E0_CS_PIN PB4 //#endif -#define E1_STEP_PIN PE4 -#define E1_DIR_PIN PE2 -#define E1_ENABLE_PIN PE3 +#define E1_STEP_PIN PE4 +#define E1_DIR_PIN PE2 +#define E1_ENABLE_PIN PE3 //#ifndef E1_CS_PIN // #define E1_CS_PIN PE5 //#endif -#define SCK_PIN PA5 -#define MISO_PIN PA6 -#define MOSI_PIN PA7 +#define SCK_PIN PA5 +#define MISO_PIN PA6 +#define MOSI_PIN PA7 // // Temperature Sensors // -#define TEMP_0_PIN PC0 // Analog Input -#define TEMP_1_PIN PC1 // Analog Input -#define TEMP_BED_PIN PC2 // Analog Input +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN PC1 // Analog Input +#define TEMP_BED_PIN PC2 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN PA1 -#define HEATER_1_PIN PA2 -#define HEATER_BED_PIN PA0 +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN PA2 +#define HEATER_BED_PIN PA0 #ifndef FAN_PIN - #define FAN_PIN PC6 + #define FAN_PIN PC6 #endif -#define FAN1_PIN PC7 -#define FAN2_PIN PC8 +#define FAN1_PIN PC7 +#define FAN2_PIN PC8 -#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN // // Misc. Functions // -//#define CASE_LIGHT_PIN_CI PF13 -//#define CASE_LIGHT_PIN_DO PF14 -//#define NEOPIXEL_PIN PF13 +//#define CASE_LIGHT_PIN_CI PF13 +//#define CASE_LIGHT_PIN_DO PF14 +//#define NEOPIXEL_PIN PF13 // // Průša i3 MK2 Multi Material Multiplexer Support // -//#define E_MUX0_PIN PG3 -//#define E_MUX1_PIN PG4 +//#define E_MUX0_PIN PG3 +//#define E_MUX1_PIN PG4 // // Servos // -//#define SERVO0_PIN PE13 -//#define SERVO1_PIN PE14 +//#define SERVO0_PIN PE13 +//#define SERVO1_PIN PE14 - -#define SDSS PE7 -#define SS_PIN PE7 -#define LED_PIN PB7 //Alive -#define PS_ON_PIN PA10 -#define KILL_PIN PA8 -#define PWR_LOSS PA4 //Power loss / nAC_FAULT +#define SDSS PE7 +#define SS_PIN PE7 +#define LED_PIN PB7 //Alive +#define PS_ON_PIN PA10 +#define KILL_PIN PA8 +#define PWR_LOSS PA4 //Power loss / nAC_FAULT // // LCD / Controller // -#define SD_DETECT_PIN PA15 -#define BEEPER_PIN PC9 -#define LCD_PINS_RS PE9 -#define LCD_PINS_ENABLE PE8 -#define LCD_PINS_D4 PB12 -#define LCD_PINS_D5 PB13 -#define LCD_PINS_D6 PB14 -#define LCD_PINS_D7 PB15 -#define BTN_EN1 PC4 -#define BTN_EN2 PC5 -#define BTN_ENC PC3 +#define SD_DETECT_PIN PA15 +#define BEEPER_PIN PC9 +#define LCD_PINS_RS PE9 +#define LCD_PINS_ENABLE PE8 +#define LCD_PINS_D4 PB12 +#define LCD_PINS_D5 PB13 +#define LCD_PINS_D6 PB14 +#define LCD_PINS_D7 PB15 +#define BTN_EN1 PC4 +#define BTN_EN2 PC5 +#define BTN_ENC PC3 // // Filament runout // -#define FIL_RUNOUT_PIN PA3 +#define FIL_RUNOUT_PIN PA3 // // ST7920 Delays diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index 2b3ad60199..d21cdd0958 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -35,14 +35,14 @@ // // Servos // -//#define SERVO0_PIN PD12 +//#define SERVO0_PIN PD12 // // Limit Switches // -#define X_STOP_PIN PG3 -#define Y_STOP_PIN PG4 -#define Z_STOP_PIN PG5 +#define X_STOP_PIN PG3 +#define Y_STOP_PIN PG4 +#define Z_STOP_PIN PG5 // // Z Probe (when not Z_MIN_PIN) @@ -54,43 +54,43 @@ // // Filament runout // -#define FIL_RUNOUT_PIN PE6 -#define FIL_RUNOUT2_PIN PE7 +#define FIL_RUNOUT_PIN PE6 +#define FIL_RUNOUT2_PIN PE7 // // Steppers // -#define X_STEP_PIN PG1 -#define X_DIR_PIN PB10 -#define X_ENABLE_PIN PG0 +#define X_STEP_PIN PG1 +#define X_DIR_PIN PB10 +#define X_ENABLE_PIN PG0 //#ifndef X_CS_PIN // #define X_CS_PIN PE0 //#endif -#define Y_STEP_PIN PF14 -#define Y_DIR_PIN PF15 -#define Y_ENABLE_PIN PF13 +#define Y_STEP_PIN PF14 +#define Y_DIR_PIN PF15 +#define Y_ENABLE_PIN PF13 //#ifndef Y_CS_PIN // #define Y_CS_PIN PE1 //#endif -#define Z_STEP_PIN PF11 -#define Z_DIR_PIN PF12 -#define Z_ENABLE_PIN PC5 +#define Z_STEP_PIN PF11 +#define Z_DIR_PIN PF12 +#define Z_ENABLE_PIN PC5 //#ifndef Z_CS_PIN // #define Z_CS_PIN PE2 //#endif -#define E0_STEP_PIN PC14 -#define E0_DIR_PIN PC13 -#define E0_ENABLE_PIN PC15 +#define E0_STEP_PIN PC14 +#define E0_DIR_PIN PC13 +#define E0_ENABLE_PIN PC15 //#ifndef E0_CS_PIN // #define E0_CS_PIN PE3 //#endif -#define E1_STEP_PIN PF1 -#define E1_DIR_PIN PF0 -#define E1_ENABLE_PIN PF2 +#define E1_STEP_PIN PF1 +#define E1_DIR_PIN PF0 +#define E1_ENABLE_PIN PF2 //#ifndef E1_CS_PIN // #define E1_CS_PIN PE4 //#endif @@ -98,37 +98,37 @@ // // Temperature Sensors // -#define TEMP_0_PIN PC1 // Analog Input -#define TEMP_1_PIN PC2 // Analog Input -#define TEMP_BED_PIN PC0 // Analog Input +#define TEMP_0_PIN PC1 // Analog Input +#define TEMP_1_PIN PC2 // Analog Input +#define TEMP_BED_PIN PC0 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN PA1 -#define HEATER_1_PIN PA0 -#define HEATER_BED_PIN PA2 +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN PA0 +#define HEATER_BED_PIN PA2 #ifndef FAN_PIN - #define FAN_PIN PC15 + #define FAN_PIN PC15 #endif -#define FAN1_PIN PF6 -#define FAN2_PIN PF7 +#define FAN1_PIN PF6 +#define FAN2_PIN PF7 -#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN // Use this by NOT overriding E0_AUTO_FAN_PIN // // LED / Lighting // -//#define CASE_LIGHT_PIN_CI -1 -//#define CASE_LIGHT_PIN_DO -1 -//#define NEOPIXEL_PIN -1 +//#define CASE_LIGHT_PIN_CI -1 +//#define CASE_LIGHT_PIN_DO -1 +//#define NEOPIXEL_PIN -1 // // Prusa i3 MK2 Multi-Material Multiplexer Support // -//#define E_MUX0_PIN -1 -//#define E_MUX1_PIN -1 +//#define E_MUX0_PIN -1 +//#define E_MUX1_PIN -1 // // SD support @@ -138,34 +138,34 @@ // // Misc. Functions // -#define SDSS PC11 -#define LED_PIN PC7 // Alive -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT +#define SDSS PC11 +#define LED_PIN PC7 // Alive +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT -#define SCK_PIN PC12 -#define MISO_PIN PC8 -#define MOSI_PIN PD2 -#define SS_PIN PC11 +#define SCK_PIN PC12 +#define MISO_PIN PC8 +#define MOSI_PIN PD2 +#define SS_PIN PC11 // // LCD / Controller // // TODO: Replace these with the correct FSMC pins, once known -#define SD_DETECT_PIN -1 -#define BEEPER_PIN PD12 -#define LCD_PINS_RS -1 -#define LCD_PINS_ENABLE -1 -#define LCD_PINS_D4 -1 -#define LCD_PINS_D5 -1 -#define LCD_PINS_D6 -1 -#define LCD_PINS_D7 -1 +#define SD_DETECT_PIN -1 +#define BEEPER_PIN PD12 +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 +#define LCD_PINS_D4 -1 +#define LCD_PINS_D5 -1 +#define LCD_PINS_D6 -1 +#define LCD_PINS_D7 -1 -#define BTN_EN1 PE3 -#define BTN_EN2 PE4 -#define BTN_ENC PE2 +#define BTN_EN1 PE3 +#define BTN_EN2 PE4 +#define BTN_ENC PE2 // // ST7920 Delays diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h index f498b7d0b9..c54c5c1806 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -32,20 +32,20 @@ // // Servos // -//#define SERVO0_PIN PD12 -//#define SERVO1_PIN -1 +//#define SERVO0_PIN PD12 +//#define SERVO1_PIN -1 // // Limit Switches // -#define X_STOP_PIN PB12 -#define Y_STOP_PIN PB13 -#define Z_STOP_PIN PB14 +#define X_STOP_PIN PB12 +#define Y_STOP_PIN PB13 +#define Z_STOP_PIN PB14 // // Filament runout // -#define FIL_RUNOUT_PIN PE1 +#define FIL_RUNOUT_PIN PE1 // // Z Probe (when not Z_MIN_PIN) @@ -57,37 +57,37 @@ // // Steppers // -#define X_STEP_PIN PB10 -#define X_DIR_PIN PB2 -#define X_ENABLE_PIN PB11 +#define X_STEP_PIN PB10 +#define X_DIR_PIN PB2 +#define X_ENABLE_PIN PB11 //#ifndef X_CS_PIN // #define X_CS_PIN PD1 //#endif -#define Y_STEP_PIN PB0 -#define Y_DIR_PIN PC5 -#define Y_ENABLE_PIN PB1 +#define Y_STEP_PIN PB0 +#define Y_DIR_PIN PC5 +#define Y_ENABLE_PIN PB1 //#ifndef Y_CS_PIN // #define Y_CS_PIN PE12 //#endif -#define Z_STEP_PIN PA7 -#define Z_DIR_PIN PA6 -#define Z_ENABLE_PIN PC4 +#define Z_STEP_PIN PA7 +#define Z_DIR_PIN PA6 +#define Z_ENABLE_PIN PC4 //#ifndef Z_CS_PIN // #define Z_CS_PIN PD5 //#endif -#define E0_STEP_PIN PA4 -#define E0_DIR_PIN PA3 -#define E0_ENABLE_PIN PA5 +#define E0_STEP_PIN PA4 +#define E0_DIR_PIN PA3 +#define E0_ENABLE_PIN PA5 //#ifndef E0_CS_PIN // #define E0_CS_PIN PB4 //#endif -#define E1_STEP_PIN -1 -#define E1_DIR_PIN -1 -#define E1_ENABLE_PIN -1 +#define E1_STEP_PIN -1 +#define E1_DIR_PIN -1 +#define E1_ENABLE_PIN -1 //#ifndef E1_CS_PIN // #define E1_CS_PIN PE5 //#endif @@ -95,51 +95,51 @@ // // Temperature Sensors // -#define TEMP_0_PIN PC0 // Analog Input -#define TEMP_1_PIN -1 // Analog Input -#define TEMP_BED_PIN PC1 // Analog Input +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN -1 // Analog Input +#define TEMP_BED_PIN PC1 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN PA1 -#define HEATER_1_PIN -1 -#define HEATER_BED_PIN PA2 +#define HEATER_0_PIN PA1 +#define HEATER_1_PIN -1 +#define HEATER_BED_PIN PA2 #ifndef FAN_PIN // #define FAN_PIN PC15 #endif -#define FAN1_PIN PC15 -#define FAN2_PIN PA0 +#define FAN1_PIN PC15 +#define FAN2_PIN PA0 -#define ORIG_E0_AUTO_FAN_PIN PC15 // Use this by NOT overriding E0_AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN PC15 // Use this by NOT overriding E0_AUTO_FAN_PIN // // Prusa i3 MK2 Multi Material Multiplexer Support // -//#define E_MUX0_PIN -1 -//#define E_MUX1_PIN -1 +//#define E_MUX0_PIN -1 +//#define E_MUX1_PIN -1 // // LED / Lighting // -//#define CASE_LIGHT_PIN_CI -1 -//#define CASE_LIGHT_PIN_DO -1 -//#define NEOPIXEL_PIN -1 +//#define CASE_LIGHT_PIN_CI -1 +//#define CASE_LIGHT_PIN_DO -1 +//#define NEOPIXEL_PIN -1 // // Misc. Functions // -#define SDSS PC11 -#define LED_PIN PC7 // Alive -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT +#define SDSS PC11 +#define LED_PIN PC7 // Alive +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // Power-loss / nAC_FAULT -#define SCK_PIN PC12 -#define MISO_PIN PC8 -#define MOSI_PIN PD2 -#define SS_PIN PC11 +#define SCK_PIN PC12 +#define MISO_PIN PC8 +#define MOSI_PIN PD2 +#define SS_PIN PC11 // // SD support @@ -151,18 +151,18 @@ // // The LCD is initialized in FSMC mode -#define SD_DETECT_PIN -1 -#define BEEPER_PIN PD12 +#define SD_DETECT_PIN -1 +#define BEEPER_PIN PD12 -#define BTN_EN1 PE3 -#define BTN_EN2 PE4 -#define BTN_ENC PE2 +#define BTN_EN1 PE3 +#define BTN_EN2 PE4 +#define BTN_ENC PE2 -#define LCD_RESET_PIN PD6 -#define LCD_BACKLIGHT_PIN PD3 -#define FSMC_CS_PIN PD4 -#define FSMC_RS_PIN PD11 -#define TOUCH_CS PB6 +#define LCD_RESET_PIN PD6 +#define LCD_BACKLIGHT_PIN PD3 +#define FSMC_CS_PIN PD4 +#define FSMC_RS_PIN PD11 +#define TOUCH_CS PB6 // // ST7920 Delays diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h index 5d97de12eb..36298d05f5 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h @@ -40,63 +40,62 @@ // // Limit Switches // -#define X_MIN_PIN PG8 -#define X_MAX_PIN PG7 -#define Y_MIN_PIN PG6 -#define Y_MAX_PIN PG5 -#define Z_MIN_PIN PG4 -#define Z_MAX_PIN PG3 +#define X_MIN_PIN PG8 +#define X_MAX_PIN PG7 +#define Y_MIN_PIN PG6 +#define Y_MAX_PIN PG5 +#define Z_MIN_PIN PG4 +#define Z_MAX_PIN PG3 // // Servos // -#define SERVO0_PIN PB0 // XS2-5 -#define SERVO1_PIN PF7 // XS1-5 -#define SERVO2_PIN PF8 // XS1-6 +#define SERVO0_PIN PB0 // XS2-5 +#define SERVO1_PIN PF7 // XS1-5 +#define SERVO2_PIN PF8 // XS1-6 // // Steppers // -#define X_STEP_PIN PE6 -#define X_DIR_PIN PE5 -#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE6 +#define X_DIR_PIN PE5 +#define X_ENABLE_PIN PC13 -#define Y_STEP_PIN PE3 -#define Y_DIR_PIN PE2 -#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE3 +#define Y_DIR_PIN PE2 +#define Y_ENABLE_PIN PE4 -#define Z_STEP_PIN PE0 -#define Z_DIR_PIN PB9 -#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PE0 +#define Z_DIR_PIN PB9 +#define Z_ENABLE_PIN PE1 -#define E0_STEP_PIN PG10 -#define E0_DIR_PIN PG9 -#define E0_ENABLE_PIN PB8 - -#define E1_STEP_PIN PD3 -#define E1_DIR_PIN PA15 -#define E1_ENABLE_PIN PD6 +#define E0_STEP_PIN PG10 +#define E0_DIR_PIN PG9 +#define E0_ENABLE_PIN PB8 +#define E1_STEP_PIN PD3 +#define E1_DIR_PIN PA15 +#define E1_ENABLE_PIN PD6 // // Temperature Sensors // -#define TEMP_0_PIN PC1 // T1 <-> E0 -#define TEMP_1_PIN PC2 // T2 <-> E1 -#define TEMP_BED_PIN PC0 // T0 <-> Bed +#define TEMP_0_PIN PC1 // T1 <-> E0 +#define TEMP_1_PIN PC2 // T2 <-> E1 +#define TEMP_BED_PIN PC0 // T0 <-> Bed // // Heaters / Fans // -#define HEATER_0_PIN PF3 // Heater0 -#define HEATER_1_PIN PF2 // Heater1 -#define HEATER_BED_PIN PF4 // Hotbed -#define FAN_PIN PA7 // Fan0 +#define HEATER_0_PIN PF3 // Heater0 +#define HEATER_1_PIN PF2 // Heater1 +#define HEATER_BED_PIN PF4 // Hotbed +#define FAN_PIN PA7 // Fan0 // // Misc. Functions // -#define SDSS -1 // PB12 +#define SDSS -1 // PB12 -#define SD_DETECT_PIN PF9 -#define BEEPER_PIN PG2 +#define SD_DETECT_PIN PF9 +#define BEEPER_PIN PG2 diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h index a6bc2b49a6..9fcd5a1474 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_MKS.h @@ -46,13 +46,13 @@ // #if ENABLED(TMC_USE_SW_SPI) #ifndef TMC_SW_MOSI - #define TMC_SW_MOSI PA7 + #define TMC_SW_MOSI PA7 #endif #ifndef TMC_SW_MISO - #define TMC_SW_MISO PA6 + #define TMC_SW_MISO PA6 #endif #ifndef TMC_SW_SCK - #define TMC_SW_SCK PA5 + #define TMC_SW_SCK PA5 #endif #endif @@ -78,23 +78,23 @@ // // Software serial // - #define X_SERIAL_TX_PIN PA3 - #define X_SERIAL_RX_PIN PC14 + #define X_SERIAL_TX_PIN PA3 + #define X_SERIAL_RX_PIN PC14 - #define Y_SERIAL_TX_PIN PA4 - #define Y_SERIAL_RX_PIN PE4 + #define Y_SERIAL_TX_PIN PA4 + #define Y_SERIAL_RX_PIN PE4 - #define Z_SERIAL_TX_PIN PD13 - #define Z_SERIAL_RX_PIN PE0 + #define Z_SERIAL_TX_PIN PD13 + #define Z_SERIAL_RX_PIN PE0 - #define E0_SERIAL_TX_PIN PD14 - #define E0_SERIAL_RX_PIN PC13 + #define E0_SERIAL_TX_PIN PD14 + #define E0_SERIAL_RX_PIN PC13 - #define E1_SERIAL_TX_PIN PD15 - #define E1_SERIAL_RX_PIN PD5 + #define E1_SERIAL_TX_PIN PD15 + #define E1_SERIAL_RX_PIN PD5 - #define E2_SERIAL_TX_PIN PD12 - #define E2_SERIAL_RX_PIN PD1 + #define E2_SERIAL_TX_PIN PD12 + #define E2_SERIAL_RX_PIN PD1 #endif // diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index 0fb469112d..19853a78fe 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -38,112 +38,112 @@ #ifdef E2END #undef E2END #endif -#define E2END 0xFFF // 4KB +#define E2END 0xFFF // 4KB // // Limit Switches // -#define X_MIN_PIN PB12 -#define X_MAX_PIN PB13 -#define Y_MIN_PIN PB15 -#define Y_MAX_PIN PD8 -#define Z_MIN_PIN PD9 -#define Z_MAX_PIN PD10 +#define X_MIN_PIN PB12 +#define X_MAX_PIN PB13 +#define Y_MIN_PIN PB15 +#define Y_MAX_PIN PD8 +#define Z_MIN_PIN PD9 +#define Z_MAX_PIN PD10 // // Steppers // -#define X_STEP_PIN PA0 -#define X_DIR_PIN PC15 -#define X_ENABLE_PIN PC11 -#define X_CS_PIN PC14 +#define X_STEP_PIN PA0 +#define X_DIR_PIN PC15 +#define X_ENABLE_PIN PC11 +#define X_CS_PIN PC14 -#define Y_STEP_PIN PE5 -#define Y_DIR_PIN PE6 -#define Y_ENABLE_PIN PE3 -#define Y_CS_PIN PE4 +#define Y_STEP_PIN PE5 +#define Y_DIR_PIN PE6 +#define Y_ENABLE_PIN PE3 +#define Y_CS_PIN PE4 -#define Z_STEP_PIN PE1 -#define Z_DIR_PIN PE2 -#define Z_ENABLE_PIN PB7 -#define Z_CS_PIN PE0 +#define Z_STEP_PIN PE1 +#define Z_DIR_PIN PE2 +#define Z_ENABLE_PIN PB7 +#define Z_CS_PIN PE0 -#define E0_STEP_PIN PB5 -#define E0_DIR_PIN PB6 -#define E0_ENABLE_PIN PC12 -#define E0_CS_PIN PC13 +#define E0_STEP_PIN PB5 +#define E0_DIR_PIN PB6 +#define E0_ENABLE_PIN PC12 +#define E0_CS_PIN PC13 -#define E1_STEP_PIN PD6 -#define E1_DIR_PIN PD7 -#define E1_ENABLE_PIN PD4 -#define E1_CS_PIN PD5 +#define E1_STEP_PIN PD6 +#define E1_DIR_PIN PD7 +#define E1_ENABLE_PIN PD4 +#define E1_CS_PIN PD5 -#define E2_STEP_PIN PD2 -#define E2_DIR_PIN PD3 -#define E2_ENABLE_PIN PD0 -#define E2_CS_PIN PD1 +#define E2_STEP_PIN PD2 +#define E2_DIR_PIN PD3 +#define E2_ENABLE_PIN PD0 +#define E2_CS_PIN PD1 // // Temperature Sensors // -#define TEMP_0_PIN PC4 -#define TEMP_1_PIN PC3 -#define TEMP_2_PIN PC2 -#define TEMP_3_PIN PC1 -#define TEMP_BED_PIN PC0 +#define TEMP_0_PIN PC4 +#define TEMP_1_PIN PC3 +#define TEMP_2_PIN PC2 +#define TEMP_3_PIN PC1 +#define TEMP_BED_PIN PC0 // // Heaters / Fans // -#define HEATER_0_PIN PC6 -#define HEATER_1_PIN PC7 -#define HEATER_2_PIN PC8 -#define HEATER_BED_PIN PA1 +#define HEATER_0_PIN PC6 +#define HEATER_1_PIN PC7 +#define HEATER_2_PIN PC8 +#define HEATER_BED_PIN PA1 -#define FAN_PIN PC9 -#define FAN1_PIN PA8 +#define FAN_PIN PC9 +#define FAN1_PIN PA8 // // I2C // -#define SCK_PIN PA5 -#define MISO_PIN PA6 -#define MOSI_PIN PA7 +#define SCK_PIN PA5 +#define MISO_PIN PA6 +#define MOSI_PIN PA7 // // Misc. Functions // -#define LED_PIN PB14 -#define BTN_PIN PC10 -#define PS_ON_PIN PE11 -#define KILL_PIN PC5 +#define LED_PIN PB14 +#define BTN_PIN PC10 +#define PS_ON_PIN PE11 +#define KILL_PIN PC5 -#define SDSS PA2 -#define SD_DETECT_PIN PB0 -#define BEEPER_PIN PE8 +#define SDSS PA2 +#define SD_DETECT_PIN PB0 +#define BEEPER_PIN PE8 // // LCD / Controller // #if HAS_SPI_LCD - #define BTN_EN1 PB2 - #define BTN_EN2 PB1 - #define BTN_ENC PE7 + #define BTN_EN1 PB2 + #define BTN_EN2 PB1 + #define BTN_ENC PE7 - #define LCD_PINS_RS PE10 - #define LCD_PINS_ENABLE PE9 - #define LCD_PINS_D4 PE12 + #define LCD_PINS_RS PE10 + #define LCD_PINS_ENABLE PE9 + #define LCD_PINS_D4 PE12 #if ENABLED(MKS_MINI_12864) - #define DOGLCD_CS PE13 - #define DOGLCD_A0 PE14 + #define DOGLCD_CS PE13 + #define DOGLCD_A0 PE14 #endif #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PE13 - #define LCD_PINS_D6 PE14 - #define LCD_PINS_D7 PE15 + #define LCD_PINS_D5 PE13 + #define LCD_PINS_D6 PE14 + #define LCD_PINS_D7 PE15 #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h index 2b6e6f6c33..1a008cd4ae 100644 --- a/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h +++ b/Marlin/src/pins/stm32f4/pins_STEVAL_3DP001V1.h @@ -51,13 +51,13 @@ // // Limit Switches // -#define X_MIN_PIN 39 // PD8 X_STOP -#define Y_MIN_PIN 40 // PD9 Y_STOP -#define Z_MIN_PIN 41 // PD10 Z_STOP +#define X_MIN_PIN 39 // PD8 X_STOP +#define Y_MIN_PIN 40 // PD9 Y_STOP +#define Z_MIN_PIN 41 // PD10 Z_STOP -#define X_MAX_PIN 44 // PD0 W_STOP -#define Y_MAX_PIN 43 // PA8 V_STOP -#define Z_MAX_PIN 42 // PD11 U_STOP +#define X_MAX_PIN 44 // PD0 W_STOP +#define Y_MAX_PIN 43 // PA8 V_STOP +#define Z_MAX_PIN 42 // PD11 U_STOP // // Z Probe (when not Z_MIN_PIN) @@ -69,64 +69,64 @@ // // Filament runout // -//#define FIL_RUNOUT_PIN 53 // PA3 BED_THE +//#define FIL_RUNOUT_PIN 53 // PA3 BED_THE // // Steppers // -#define X_STEP_PIN 61 // PE14 X_PWM -#define X_DIR_PIN 62 // PE15 X_DIR -#define X_ENABLE_PIN 60 // PE13 X_RES -#define X_CS_PIN 16 // PA4 SPI_CS +#define X_STEP_PIN 61 // PE14 X_PWM +#define X_DIR_PIN 62 // PE15 X_DIR +#define X_ENABLE_PIN 60 // PE13 X_RES +#define X_CS_PIN 16 // PA4 SPI_CS -#define Y_STEP_PIN 64 // PB10 Y_PWM -#define Y_DIR_PIN 65 // PE9 Y_DIR -#define Y_ENABLE_PIN 63 // PE10 Y_RES -#define Y_CS_PIN 16 // PA4 SPI_CS +#define Y_STEP_PIN 64 // PB10 Y_PWM +#define Y_DIR_PIN 65 // PE9 Y_DIR +#define Y_ENABLE_PIN 63 // PE10 Y_RES +#define Y_CS_PIN 16 // PA4 SPI_CS -#define Z_STEP_PIN 67 // PC6 Z_PWM -#define Z_DIR_PIN 68 // PC0 Z_DIR -#define Z_ENABLE_PIN 66 // PC15 Z_RES -#define Z_CS_PIN 16 // PA4 SPI_CS +#define Z_STEP_PIN 67 // PC6 Z_PWM +#define Z_DIR_PIN 68 // PC0 Z_DIR +#define Z_ENABLE_PIN 66 // PC15 Z_RES +#define Z_CS_PIN 16 // PA4 SPI_CS -#define E0_STEP_PIN 71 // PD12 E1_PW -#define E0_DIR_PIN 70 // PC13 E1_DIR -#define E0_ENABLE_PIN 69 // PC14 E1_RE -#define E0_CS_PIN 16 // PA4 SPI_CS +#define E0_STEP_PIN 71 // PD12 E1_PW +#define E0_DIR_PIN 70 // PC13 E1_DIR +#define E0_ENABLE_PIN 69 // PC14 E1_RE +#define E0_CS_PIN 16 // PA4 SPI_CS -#define E1_STEP_PIN 73 // PE5 E2_PWM -#define E1_DIR_PIN 74 // PE6 E2_DIR -#define E1_ENABLE_PIN 72 // PE4 E2_RESE -#define E1_CS_PIN 16 // PA4 SPI_CS +#define E1_STEP_PIN 73 // PE5 E2_PWM +#define E1_DIR_PIN 74 // PE6 E2_DIR +#define E1_ENABLE_PIN 72 // PE4 E2_RESE +#define E1_CS_PIN 16 // PA4 SPI_CS -#define E2_STEP_PIN 77 // PB8 E3_PWM -#define E2_DIR_PIN 76 // PE2 E3_DIR -#define E2_ENABLE_PIN 75 // PE3 E3_RESE -#define E2_CS_PIN 16 // PA4 SPI_CS +#define E2_STEP_PIN 77 // PB8 E3_PWM +#define E2_DIR_PIN 76 // PE2 E3_DIR +#define E2_ENABLE_PIN 75 // PE3 E3_RESE +#define E2_CS_PIN 16 // PA4 SPI_CS // needed to pass a sanity check -#define X2_CS_PIN 16 // PA4 SPI_CS -#define Y2_CS_PIN 16 // PA4 SPI_CS -#define Z2_CS_PIN 16 // PA4 SPI_CS -#define Z3_CS_PIN 16 // PA4 SPI_CS -#define E3_CS_PIN 16 // PA4 SPI_CS -#define E4_CS_PIN 16 // PA4 SPI_CS -#define E5_CS_PIN 16 // PA4 SPI_CS +#define X2_CS_PIN 16 // PA4 SPI_CS +#define Y2_CS_PIN 16 // PA4 SPI_CS +#define Z2_CS_PIN 16 // PA4 SPI_CS +#define Z3_CS_PIN 16 // PA4 SPI_CS +#define E3_CS_PIN 16 // PA4 SPI_CS +#define E4_CS_PIN 16 // PA4 SPI_CS +#define E5_CS_PIN 16 // PA4 SPI_CS #if HAS_L64XX - #define L6470_CHAIN_SCK_PIN 17 // PA5 - #define L6470_CHAIN_MISO_PIN 18 // PA6 - #define L6470_CHAIN_MOSI_PIN 19 // PA7 - #define L6470_CHAIN_SS_PIN 16 // PA4 + #define L6470_CHAIN_SCK_PIN 17 // PA5 + #define L6470_CHAIN_MISO_PIN 18 // PA6 + #define L6470_CHAIN_MOSI_PIN 19 // PA7 + #define L6470_CHAIN_SS_PIN 16 // PA4 - //#define SCK_PIN L6470_CHAIN_SCK_PIN - //#define MISO_PIN L6470_CHAIN_MISO_PIN - //#define MOSI_PIN L6470_CHAIN_MOSI_PIN + //#define SCK_PIN L6470_CHAIN_SCK_PIN + //#define MISO_PIN L6470_CHAIN_MISO_PIN + //#define MOSI_PIN L6470_CHAIN_MOSI_PIN #else - //#define SCK_PIN 13 // PB13 SPI_S - //#define MISO_PIN 12 // PB14 SPI_M - //#define MOSI_PIN 11 // PB15 SPI_M + //#define SCK_PIN 13 // PB13 SPI_S + //#define MISO_PIN 12 // PB14 SPI_M + //#define MOSI_PIN 11 // PB15 SPI_M #endif /** @@ -147,64 +147,64 @@ // // Temperature Sensors // -#define TEMP_0_PIN 3 // Analog input 3, digital pin 54 PA0 E1_THERMISTOR -#define TEMP_1_PIN 4 // Analog input 4, digital pin 55 PA1 E2_THERMISTOR -#define TEMP_2_PIN 5 // Analog input 5, digital pin 56 PA2 E3_THERMISTOR -#define TEMP_BED_PIN 0 // Analog input 0, digital pin 51 PC2 BED_THERMISTOR_1 -#define TEMP_BED_1_PIN 1 // Analog input 1, digital pin 52 PC3 BED_THERMISTOR_2 -#define TEMP_BED_2_PIN 2 // Analog input 2, digital pin 53 PA3 BED_THERMISTOR_3 +#define TEMP_0_PIN 3 // Analog input 3, digital pin 54 PA0 E1_THERMISTOR +#define TEMP_1_PIN 4 // Analog input 4, digital pin 55 PA1 E2_THERMISTOR +#define TEMP_2_PIN 5 // Analog input 5, digital pin 56 PA2 E3_THERMISTOR +#define TEMP_BED_PIN 0 // Analog input 0, digital pin 51 PC2 BED_THERMISTOR_1 +#define TEMP_BED_1_PIN 1 // Analog input 1, digital pin 52 PC3 BED_THERMISTOR_2 +#define TEMP_BED_2_PIN 2 // Analog input 2, digital pin 53 PA3 BED_THERMISTOR_3 // // Heaters / Fans // -#define HEATER_0_PIN 48 // PC7 E1_HEAT_PWM -#define HEATER_1_PIN 49 // PB0 E2_HEAT_PWM -#define HEATER_2_PIN 50 // PB1 E3_HEAT_PWM -#define HEATER_BED_PIN 46 // PD14 (BED_HEAT_1 FET -#define HEATER_BED_1_PIN 45 // PD13 (BED_HEAT_2 FET -#define HEATER_BED_2_PIN 47 // PD15 (BED_HEAT_3 FET +#define HEATER_0_PIN 48 // PC7 E1_HEAT_PWM +#define HEATER_1_PIN 49 // PB0 E2_HEAT_PWM +#define HEATER_2_PIN 50 // PB1 E3_HEAT_PWM +#define HEATER_BED_PIN 46 // PD14 (BED_HEAT_1 FET +#define HEATER_BED_1_PIN 45 // PD13 (BED_HEAT_2 FET +#define HEATER_BED_2_PIN 47 // PD15 (BED_HEAT_3 FET -#define FAN_PIN 57 // PC4 E1_FAN PWM pin, Part cooling fan FET -#define FAN1_PIN 58 // PC5 E2_FAN PWM pin, Extruder fan FET -#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN -#define FAN2_PIN 59 // PE8 E3_FAN PWM pin, Controller fan FET +#define FAN_PIN 57 // PC4 E1_FAN PWM pin, Part cooling fan FET +#define FAN1_PIN 58 // PC5 E2_FAN PWM pin, Extruder fan FET +#define ORIG_E0_AUTO_FAN_PIN FAN1_PIN +#define FAN2_PIN 59 // PE8 E3_FAN PWM pin, Controller fan FET // // Misc functions // -#define SDSS 16 // PA4 SPI_CS -#define LED_PIN -1 // 9 // PE1 green LED Heart beat -#define PS_ON_PIN -1 -#define KILL_PIN -1 -#define POWER_LOSS_PIN -1 // PWR_LOSS / nAC_FAULT +#define SDSS 16 // PA4 SPI_CS +#define LED_PIN -1 // 9 // PE1 green LED Heart beat +#define PS_ON_PIN -1 +#define KILL_PIN -1 +#define POWER_LOSS_PIN -1 // PWR_LOSS / nAC_FAULT // // LCD / Controller // -//#define SD_DETECT_PIN 66 // PA15 SD_CA -//#define BEEPER_PIN 24 // PC9 SDIO_D1 -//#define LCD_PINS_RS 65 // PE9 Y_DIR -//#define LCD_PINS_ENABLE 59 // PE8 E3_FAN -//#define LCD_PINS_D4 10 // PB12 SPI_C -//#define LCD_PINS_D5 13 // PB13 SPI_S -//#define LCD_PINS_D6 12 // PB14 SPI_M -//#define LCD_PINS_D7 11 // PB15 SPI_M -//#define BTN_EN1 57 // PC4 E1_FAN -//#define BTN_EN2 58 // PC5 E2_FAN -//#define BTN_ENC 52 // PC3 BED_THE +//#define SD_DETECT_PIN 66 // PA15 SD_CA +//#define BEEPER_PIN 24 // PC9 SDIO_D1 +//#define LCD_PINS_RS 65 // PE9 Y_DIR +//#define LCD_PINS_ENABLE 59 // PE8 E3_FAN +//#define LCD_PINS_D4 10 // PB12 SPI_C +//#define LCD_PINS_D5 13 // PB13 SPI_S +//#define LCD_PINS_D6 12 // PB14 SPI_M +//#define LCD_PINS_D7 11 // PB15 SPI_M +//#define BTN_EN1 57 // PC4 E1_FAN +//#define BTN_EN2 58 // PC5 E2_FAN +//#define BTN_ENC 52 // PC3 BED_THE // // Extension pins // -//#define EXT0_PIN 49 // PB0 E2_HEAT -//#define EXT1_PIN 50 // PB1 E3_HEAT -//#define EXT2_PIN // PB2 not used (tied to ground -//#define EXT3_PIN 39 // PD8 X_STOP -//#define EXT4_PIN 40 // PD9 Y_STOP -//#define EXT5_PIN 41 // PD10 Z_STOP -//#define EXT6_PIN 42 // PD11 -//#define EXT7_PIN 71 // PD12 E1_PW -//#define EXT8_PIN 64 // PB10 Y_PWM +//#define EXT0_PIN 49 // PB0 E2_HEAT +//#define EXT1_PIN 50 // PB1 E3_HEAT +//#define EXT2_PIN // PB2 not used (tied to ground +//#define EXT3_PIN 39 // PD8 X_STOP +//#define EXT4_PIN 40 // PD9 Y_STOP +//#define EXT5_PIN 41 // PD10 Z_STOP +//#define EXT6_PIN 42 // PD11 +//#define EXT7_PIN 71 // PD12 E1_PW +//#define EXT8_PIN 64 // PB10 Y_PWM // WIFI // 2 // PD3 CTS @@ -215,7 +215,6 @@ // 7 // PE11 WIFI_RESET // 8 // PE12 WIFI_BOOT - // I2C USER // 14 // PB7 SDA // 15 // PB6 SCL @@ -228,27 +227,27 @@ // // Onboard SD support // -#define SDIO_D0_PIN 23 // PC8 SDIO_D0 -#define SDIO_D1_PIN 24 // PC9 SDIO_D1 -//#define SD_CARD_DETECT_PIN 25 // PA15 SD_CARD_DETECT -#define SDIO_D2_PIN 26 // PC10 SDIO_D2 -#define SDIO_D3_PIN 27 // PC11 SDIO_D3 -#define SDIO_CK_PIN 28 // PC12 SDIO_CK -#define SDIO_CMD_PIN 29 // PD2 SDIO_CMD +#define SDIO_D0_PIN 23 // PC8 SDIO_D0 +#define SDIO_D1_PIN 24 // PC9 SDIO_D1 +//#define SD_CARD_DETECT_PIN 25 // PA15 SD_CARD_DETECT +#define SDIO_D2_PIN 26 // PC10 SDIO_D2 +#define SDIO_D3_PIN 27 // PC11 SDIO_D3 +#define SDIO_CK_PIN 28 // PC12 SDIO_CK +#define SDIO_CMD_PIN 29 // PD2 SDIO_CMD #ifndef SDCARD_CONNECTION - #define SDCARD_CONNECTION ONBOARD + #define SDCARD_CONNECTION ONBOARD #endif #if SDCARD_CONNECTION == ONBOARD - #define SDIO_SUPPORT // Use SDIO for onboard SD + #define SDIO_SUPPORT // Use SDIO for onboard SD #ifndef SDIO_SUPPORT - #define SOFTWARE_SPI // Use soft SPI for onboard SD - #define SDSS SDIO_D3_PIN - #define SCK_PIN SDIO_CK_PIN - #define MISO_PIN SDIO_D0_PIN - #define MOSI_PIN SDIO_CMD_PIN + #define SOFTWARE_SPI // Use soft SPI for onboard SD + #define SDSS SDIO_D3_PIN + #define SCK_PIN SDIO_CK_PIN + #define MISO_PIN SDIO_D0_PIN + #define MOSI_PIN SDIO_CMD_PIN #endif #endif @@ -265,16 +264,13 @@ // USERKET // 38 // PE7 USER_BUTTON - // 0 // PA9 TX // 1 // PA10 RX - // IR/PROBE // 32 // PD1 IR_OUT // 33 // PC1 IR_ON - /** * Logical pin vs. port/pin cross reference * diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h index 35faf076ab..7eb95a4f50 100644 --- a/Marlin/src/pins/stm32f4/pins_VAKE403D.h +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -32,133 +32,133 @@ //#define I2C_EEPROM -#define E2END 0xFFF // EEPROM end address (4kB) +#define E2END 0xFFF // EEPROM end address (4kB) // // Servos // -//#define SERVO0_PIN PE13 -//#define SERVO1_PIN PE14 +//#define SERVO0_PIN PE13 +//#define SERVO1_PIN PE14 // // Limit Switches // -#define X_STOP_PIN PE10 -#define Y_STOP_PIN PE9 -#define Z_STOP_PIN PE8 +#define X_STOP_PIN PE10 +#define Y_STOP_PIN PE9 +#define Z_STOP_PIN PE8 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN PA4 + #define Z_MIN_PROBE_PIN PA4 #endif // // Filament runout // -#define FIL_RUNOUT_PIN PA3 +#define FIL_RUNOUT_PIN PA3 // // Steppers // -#define STEPPER_ENABLE_PIN PB2 +#define STEPPER_ENABLE_PIN PB2 -#define X_STEP_PIN PC6 // X_STEP -#define X_DIR_PIN PC7 // X_DIR -#define X_ENABLE_PIN PB2 // +#define X_STEP_PIN PC6 // X_STEP +#define X_DIR_PIN PC7 // X_DIR +#define X_ENABLE_PIN PB2 // #ifndef X_CS_PIN - #define X_CS_PIN PC8 // X_CS + #define X_CS_PIN PC8 // X_CS #endif -#define Y_STEP_PIN PD9 // Y_STEP -#define Y_DIR_PIN PD10 // Y_DIR -#define Y_ENABLE_PIN PB2 // +#define Y_STEP_PIN PD9 // Y_STEP +#define Y_DIR_PIN PD10 // Y_DIR +#define Y_ENABLE_PIN PB2 // #ifndef Y_CS_PIN - #define Y_CS_PIN PD11 // Y_CS + #define Y_CS_PIN PD11 // Y_CS #endif -#define Z_STEP_PIN PE15 // Z_STEP -#define Z_DIR_PIN PB10 // Z_DIR -#define Z_ENABLE_PIN PB2 +#define Z_STEP_PIN PE15 // Z_STEP +#define Z_DIR_PIN PB10 // Z_DIR +#define Z_ENABLE_PIN PB2 #ifndef Z_CS_PIN - #define Z_CS_PIN PD8 + #define Z_CS_PIN PD8 #endif -#define E0_STEP_PIN PB1 -#define E0_DIR_PIN PB13 -#define E0_ENABLE_PIN PB2 +#define E0_STEP_PIN PB1 +#define E0_DIR_PIN PB13 +#define E0_ENABLE_PIN PB2 #ifndef E0_CS_PIN - #define E0_CS_PIN PE11 + #define E0_CS_PIN PE11 #endif -#define E1_STEP_PIN PC4 -#define E1_DIR_PIN PC5 -#define E1_ENABLE_PIN PB2 +#define E1_STEP_PIN PC4 +#define E1_DIR_PIN PC5 +#define E1_ENABLE_PIN PB2 #ifndef E1_CS_PIN - #define E1_CS_PIN PB0 + #define E1_CS_PIN PB0 #endif -#define SCK_PIN PE12 // PA5 // SPI1 for SD card -#define MISO_PIN PE13 // PA6 -#define MOSI_PIN PE14 // PA7 +#define SCK_PIN PE12 // PA5 // SPI1 for SD card +#define MISO_PIN PE13 // PA6 +#define MOSI_PIN PE14 // PA7 // added for SD card : optional or not ??? -//#define SD_CHIP_SELECT_PIN SDSS // The default chip select pin for the SD card is SS. +//#define SD_CHIP_SELECT_PIN SDSS // The default chip select pin for the SD card is SS. // The following three pins must not be redefined for hardware SPI. -//#define SPI_MOSI_PIN MOSI_PIN // SPI Master Out Slave In pin -//#define SPI_MISO_PIN MISO_PIN // SPI Master In Slave Out pin -//#define SPI_SCK_PIN SCK_PIN // SPI Clock pin +//#define SPI_MOSI_PIN MOSI_PIN // SPI Master Out Slave In pin +//#define SPI_MISO_PIN MISO_PIN // SPI Master In Slave Out pin +//#define SPI_SCK_PIN SCK_PIN // SPI Clock pin // // Temperature Sensors (Analog inputs) // -#define TEMP_0_PIN PC0 // Analog Input -#define TEMP_1_PIN PC1 // Analog Input -#define TEMP_2_PIN PC2 // Analog Input -#define TEMP_3_PIN PC3 // Analog Input -#define TEMP_BED_PIN PC3 // Analog Input +#define TEMP_0_PIN PC0 // Analog Input +#define TEMP_1_PIN PC1 // Analog Input +#define TEMP_2_PIN PC2 // Analog Input +#define TEMP_3_PIN PC3 // Analog Input +#define TEMP_BED_PIN PC3 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN PD15 -#define HEATER_1_PIN PD14 -#define HEATER_BED_PIN PD12 +#define HEATER_0_PIN PD15 +#define HEATER_1_PIN PD14 +#define HEATER_BED_PIN PD12 #ifndef FAN_PIN - #define FAN_PIN PD13 + #define FAN_PIN PD13 #endif -#define FAN1_PIN PB5 // PA0 -#define FAN2_PIN PB4 // PA1 +#define FAN1_PIN PB5 // PA0 +#define FAN2_PIN PB4 // PA1 -#define ORIG_E0_AUTO_FAN_PIN PD13 // Use this by NOT overriding E0_AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN PD13 // Use this by NOT overriding E0_AUTO_FAN_PIN // // Misc. Functions // -//#define CASE_LIGHT_PIN_CI PF13 -//#define CASE_LIGHT_PIN_DO PF14 -//#define NEOPIXEL_PIN PF13 +//#define CASE_LIGHT_PIN_CI PF13 +//#define CASE_LIGHT_PIN_DO PF14 +//#define NEOPIXEL_PIN PF13 // // Prusa i3 MK2 Multi Material Multiplexer Support // -//#define E_MUX0_PIN PG3 -//#define E_MUX1_PIN PG4 +//#define E_MUX0_PIN PG3 +//#define E_MUX1_PIN PG4 -#define LED_PIN PB14 // Alive -#define PS_ON_PIN PE0 -#define KILL_PIN PD5 -#define POWER_LOSS_PIN PA4 // ?? Power loss / nAC_FAULT +#define LED_PIN PB14 // Alive +#define PS_ON_PIN PE0 +#define KILL_PIN PD5 +#define POWER_LOSS_PIN PA4 // ?? Power loss / nAC_FAULT #if ENABLED(SDSUPPORT) - #define SD_DETECT_PIN PB7 - #define SS_PIN PB_15 // USD_CS -> CS for onboard SD + #define SD_DETECT_PIN PB7 + #define SS_PIN PB_15 // USD_CS -> CS for onboard SD #endif // @@ -166,29 +166,29 @@ // #if HAS_SPI_LCD #if ENABLED(SDSUPPORT) - #define SDSS PB6 // CS for SD card in LCD + #define SDSS PB6 // CS for SD card in LCD #endif - #define BEEPER_PIN PC9 - #define LCD_PINS_RS PC12 - #define LCD_PINS_ENABLE PD7 - #define LCD_PINS_D4 PD1 - #define LCD_PINS_D5 PD2 - #define LCD_PINS_D6 PD3 - #define LCD_PINS_D7 PD4 - #define BTN_EN1 PD6 - #define BTN_EN2 PD0 - #define BTN_ENC PB12 + #define BEEPER_PIN PC9 + #define LCD_PINS_RS PC12 + #define LCD_PINS_ENABLE PD7 + #define LCD_PINS_D4 PD1 + #define LCD_PINS_D5 PD2 + #define LCD_PINS_D6 PD3 + #define LCD_PINS_D7 PD4 + #define BTN_EN1 PD6 + #define BTN_EN2 PD0 + #define BTN_ENC PB12 #endif // // ST7920 Delays // #ifndef ST7920_DELAY_1 - #define ST7920_DELAY_1 DELAY_NS(96) + #define ST7920_DELAY_1 DELAY_NS(96) #endif #ifndef ST7920_DELAY_2 - #define ST7920_DELAY_2 DELAY_NS(48) + #define ST7920_DELAY_2 DELAY_NS(48) #endif #ifndef ST7920_DELAY_3 - #define ST7920_DELAY_3 DELAY_NS(715) + #define ST7920_DELAY_3 DELAY_NS(715) #endif diff --git a/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h index 45a1f68e5a..736445cdab 100644 --- a/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h +++ b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h @@ -28,7 +28,7 @@ #define BOARD_INFO_NAME "RemRam v1" #define DEFAULT_MACHINE_NAME "RemRam" -#define SRAM_EEPROM_EMULATION // Emulate the EEPROM using Backup SRAM +#define SRAM_EEPROM_EMULATION // Emulate the EEPROM using Backup SRAM #if HOTENDS > 1 || E_STEPPERS > 1 #error "RemRam supports only one hotend / E-stepper." @@ -38,96 +38,96 @@ // Limit Switches // #if DISABLED(SENSORLESS_HOMING) - #define X_MIN_PIN 58 - #define X_MAX_PIN 59 - #define Y_MIN_PIN 60 - #define Y_MAX_PIN 61 - #define Z_MIN_PIN 62 - #define Z_MAX_PIN 63 + #define X_MIN_PIN 58 + #define X_MAX_PIN 59 + #define Y_MIN_PIN 60 + #define Y_MAX_PIN 61 + #define Z_MIN_PIN 62 + #define Z_MAX_PIN 63 #else - #define X_STOP_PIN 36 - #define Y_STOP_PIN 39 - #define Z_MIN_PIN 62 - #define Z_MAX_PIN 42 + #define X_STOP_PIN 36 + #define Y_STOP_PIN 39 + #define Z_MIN_PIN 62 + #define Z_MAX_PIN 42 #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 26 // EXT_D1 + #define Z_MIN_PROBE_PIN 26 // EXT_D1 #endif // // Steppers // -#define X_STEP_PIN 22 -#define X_DIR_PIN 35 -#define X_ENABLE_PIN 34 -#define X_CS_PIN 14 +#define X_STEP_PIN 22 +#define X_DIR_PIN 35 +#define X_ENABLE_PIN 34 +#define X_CS_PIN 14 -#define Y_STEP_PIN 23 -#define Y_DIR_PIN 38 -#define Y_ENABLE_PIN 37 -#define Y_CS_PIN 15 +#define Y_STEP_PIN 23 +#define Y_DIR_PIN 38 +#define Y_ENABLE_PIN 37 +#define Y_CS_PIN 15 -#define Z_STEP_PIN 24 -#define Z_DIR_PIN 41 -#define Z_ENABLE_PIN 40 -#define Z_CS_PIN 16 +#define Z_STEP_PIN 24 +#define Z_DIR_PIN 41 +#define Z_ENABLE_PIN 40 +#define Z_CS_PIN 16 -#define E0_STEP_PIN 25 -#define E0_DIR_PIN 44 -#define E0_ENABLE_PIN 43 -#define E0_CS_PIN 10 +#define E0_STEP_PIN 25 +#define E0_DIR_PIN 44 +#define E0_ENABLE_PIN 43 +#define E0_CS_PIN 10 // // Temperature Sensors // -#define TEMP_0_PIN 64 // THERM_1 -#define TEMP_1_PIN 65 // THERM_2 -#define TEMP_BED_PIN 66 // THERM_3 +#define TEMP_0_PIN 64 // THERM_1 +#define TEMP_1_PIN 65 // THERM_2 +#define TEMP_BED_PIN 66 // THERM_3 // // Heaters / Fans // -#define HEATER_0_PIN 33 -#define HEATER_BED_PIN 31 +#define HEATER_0_PIN 33 +#define HEATER_BED_PIN 31 #ifndef FAN_PIN - #define FAN_PIN 30 // "FAN1" + #define FAN_PIN 30 // "FAN1" #endif -#define FAN1_PIN 32 // "FAN2" +#define FAN1_PIN 32 // "FAN2" -#define ORIG_E0_AUTO_FAN_PIN 32 // Use this by NOT overriding E0_AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN 32 // Use this by NOT overriding E0_AUTO_FAN_PIN // // Servos // -#define SERVO0_PIN 26 // PWM_EXT1 -#define SERVO1_PIN 27 // PWM_EXT2 +#define SERVO0_PIN 26 // PWM_EXT1 +#define SERVO1_PIN 27 // PWM_EXT2 -#define SDSS 57 // Onboard SD card reader -//#define SDSS 9 // LCD SD card reader -#define LED_PIN 21 // STATUS_LED +#define SDSS 57 // Onboard SD card reader +//#define SDSS 9 // LCD SD card reader +#define LED_PIN 21 // STATUS_LED // // LCD / Controller // -#define SD_DETECT_PIN 56 // SD_CARD_DET -#define BEEPER_PIN 46 // LCD_BEEPER -#define LCD_PINS_RS 49 // LCD_RS -#define LCD_PINS_ENABLE 48 // LCD_EN -#define LCD_PINS_D4 50 // LCD_D4 -#define LCD_PINS_D5 51 // LCD_D5 -#define LCD_PINS_D6 52 // LCD_D6 -#define LCD_PINS_D7 53 // LCD_D7 -#define BTN_EN1 54 // BTN_EN1 -#define BTN_EN2 55 // BTN_EN2 -#define BTN_ENC 47 // BTN_ENC +#define SD_DETECT_PIN 56 // SD_CARD_DET +#define BEEPER_PIN 46 // LCD_BEEPER +#define LCD_PINS_RS 49 // LCD_RS +#define LCD_PINS_ENABLE 48 // LCD_EN +#define LCD_PINS_D4 50 // LCD_D4 +#define LCD_PINS_D5 51 // LCD_D5 +#define LCD_PINS_D6 52 // LCD_D6 +#define LCD_PINS_D7 53 // LCD_D7 +#define BTN_EN1 54 // BTN_EN1 +#define BTN_EN2 55 // BTN_EN2 +#define BTN_ENC 47 // BTN_ENC // // Timers // -#define STEP_TIMER 2 +#define STEP_TIMER 2 diff --git a/Marlin/src/pins/stm32f7/pins_THE_BORG.h b/Marlin/src/pins/stm32f7/pins_THE_BORG.h index bfc9507c45..9968d9d1f1 100644 --- a/Marlin/src/pins/stm32f7/pins_THE_BORG.h +++ b/Marlin/src/pins/stm32f7/pins_THE_BORG.h @@ -31,7 +31,7 @@ #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME #ifndef E2END - #define E2END 0xFFF // EEPROM end address + #define E2END 0xFFF // EEPROM end address #endif // Ignore temp readings during development. @@ -40,148 +40,142 @@ // // Limit Switches // -#define X_MIN_PIN PE9 -#define X_MAX_PIN PE10 -#define Y_MIN_PIN PE7 -#define Y_MAX_PIN PE8 -#define Z_MIN_PIN PF15 -#define Z_MAX_PIN PG0 -#define E_MIN_PIN PE2 -#define E_MAX_PIN PE3 +#define X_MIN_PIN PE9 +#define X_MAX_PIN PE10 +#define Y_MIN_PIN PE7 +#define Y_MAX_PIN PE8 +#define Z_MIN_PIN PF15 +#define Z_MAX_PIN PG0 +#define E_MIN_PIN PE2 +#define E_MAX_PIN PE3 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN PA4 + #define Z_MIN_PROBE_PIN PA4 #endif // // Steppers // -#define STEPPER_ENABLE_PIN PE0 +#define STEPPER_ENABLE_PIN PE0 -#define X_STEP_PIN PC6 // 96, 39 in Arduino -#define X_DIR_PIN PC7 -#define X_ENABLE_PIN PC8 +#define X_STEP_PIN PC6 // 96, 39 in Arduino +#define X_DIR_PIN PC7 +#define X_ENABLE_PIN PC8 +#define Y_STEP_PIN PD9 +#define Y_DIR_PIN PD10 +#define Y_ENABLE_PIN PD11 -#define Y_STEP_PIN PD9 -#define Y_DIR_PIN PD10 -#define Y_ENABLE_PIN PD11 +#define Z_STEP_PIN PE15 +#define Z_DIR_PIN PG1 +#define Z_ENABLE_PIN PD8 -#define Z_STEP_PIN PE15 -#define Z_DIR_PIN PG1 -#define Z_ENABLE_PIN PD8 +#define E0_STEP_PIN PB1 +#define E0_DIR_PIN PB2 +#define E0_ENABLE_PIN PE11 +#define E1_STEP_PIN PC4 +#define E1_DIR_PIN PC5 +#define E1_ENABLE_PIN PB0 -#define E0_STEP_PIN PB1 -#define E0_DIR_PIN PB2 -#define E0_ENABLE_PIN PE11 +#define E2_STEP_PIN PC13 +#define E2_DIR_PIN PC14 +#define E2_ENABLE_PIN PC15 +#define Z2_STEP_PIN PC13 +#define Z2_DIR_PIN PC14 +#define Z2_ENABLE_PIN PC15 -#define E1_STEP_PIN PC4 -#define E1_DIR_PIN PC5 -#define E1_ENABLE_PIN PB0 +#define SCK_PIN PA5 +#define MISO_PIN PA6 +#define MOSI_PIN PA7 +#define SPI1_SCK_PIN PA5 +#define SPI1_MISO_PIN PA6 +#define SPI1_MOSI_PIN PA7 -#define E2_STEP_PIN PC13 -#define E2_DIR_PIN PC14 -#define E2_ENABLE_PIN PC15 - -#define Z2_STEP_PIN PC13 -#define Z2_DIR_PIN PC14 -#define Z2_ENABLE_PIN PC15 - - -#define SCK_PIN PA5 -#define MISO_PIN PA6 -#define MOSI_PIN PA7 - -#define SPI1_SCK_PIN PA5 -#define SPI1_MISO_PIN PA6 -#define SPI1_MOSI_PIN PA7 - -#define SPI6_SCK_PIN PG13 -#define SPI6_MISO_PIN PG12 -#define SPI6_MOSI_PIN PG14 +#define SPI6_SCK_PIN PG13 +#define SPI6_MISO_PIN PG12 +#define SPI6_MOSI_PIN PG14 // // Temperature Sensors // -#define TEMP_0_PIN PC3 // Analog Input -#define TEMP_1_PIN PC2 // Analog Input -#define TEMP_2_PIN PC1 // Analog Input -#define TEMP_3_PIN PC0 // Analog Input +#define TEMP_0_PIN PC3 // Analog Input +#define TEMP_1_PIN PC2 // Analog Input +#define TEMP_2_PIN PC1 // Analog Input +#define TEMP_3_PIN PC0 // Analog Input -#define TEMP_BED_PIN PF10 // Analog Input +#define TEMP_BED_PIN PF10 // Analog Input -#define TEMP_5_PIN PE12 // Analog Input, Probe temp +#define TEMP_5_PIN PE12 // Analog Input, Probe temp // // Heaters / Fans // -#define HEATER_0_PIN PD15 -#define HEATER_1_PIN PD14 -#define HEATER_BED_PIN PF6 +#define HEATER_0_PIN PD15 +#define HEATER_1_PIN PD14 +#define HEATER_BED_PIN PF6 #ifndef FAN_PIN - #define FAN_PIN PD13 + #define FAN_PIN PD13 #endif -#define FAN1_PIN PA0 -#define FAN2_PIN PA1 +#define FAN1_PIN PA0 +#define FAN2_PIN PA1 -#define ORIG_E0_AUTO_FAN_PIN PA1 // Use this by NOT overriding E0_AUTO_FAN_PIN +#define ORIG_E0_AUTO_FAN_PIN PA1 // Use this by NOT overriding E0_AUTO_FAN_PIN // // Misc. Functions // -//#define CASE_LIGHT_PIN_CI PF13 -//#define CASE_LIGHT_PIN_DO PF14 -//#define NEOPIXEL_PIN PF13 +//#define CASE_LIGHT_PIN_CI PF13 +//#define CASE_LIGHT_PIN_DO PF14 +//#define NEOPIXEL_PIN PF13 // // Průša i3 MK2 Multi Material Multiplexer Support // -#define E_MUX0_PIN PG3 -#define E_MUX1_PIN PG4 +#define E_MUX0_PIN PG3 +#define E_MUX1_PIN PG4 // // Servos // -#define SERVO0_PIN PE13 -#define SERVO1_PIN PE14 +#define SERVO0_PIN PE13 +#define SERVO1_PIN PE14 - -#define SDSS PA8 -#define SS_PIN PA8 -#define LED_PIN PA2 // Alive -#define PS_ON_PIN PA3 -#define KILL_PIN -1 //PD5 // EXP2-10 -#define PWR_LOSS PG5 // Power loss / nAC_FAULT +#define SDSS PA8 +#define SS_PIN PA8 +#define LED_PIN PA2 // Alive +#define PS_ON_PIN PA3 +#define KILL_PIN -1 //PD5 // EXP2-10 +#define PWR_LOSS PG5 // Power loss / nAC_FAULT // // MAX7219_DEBUG // -#define MAX7219_CLK_PIN PG10 // EXP1-1 -#define MAX7219_DIN_PIN PD7 // EXP1-3 -#define MAX7219_LOAD_PIN PD1 // EXP1-5 +#define MAX7219_CLK_PIN PG10 // EXP1-1 +#define MAX7219_DIN_PIN PD7 // EXP1-3 +#define MAX7219_LOAD_PIN PD1 // EXP1-5 // // LCD / Controller // -//#define SD_DETECT_PIN -1 //PB6) // EXP2-4 -#define BEEPER_PIN PG10 // EXP1-1 -#define LCD_PINS_RS PG9 // EXP1-4 -#define LCD_PINS_ENABLE PD7 // EXP1-3 -#define LCD_PINS_D4 PD1 // EXP1-5 -#define LCD_PINS_D5 PF0 // EXP1-6 -#define LCD_PINS_D6 PD3 // EXP1-7 -#define LCD_PINS_D7 PD4 // EXP1-8 -#define BTN_EN1 PD6 // EXP2-5 -#define BTN_EN2 PD0 // EXP2-3 -#define BTN_ENC PG11 // EXP1-2 +//#define SD_DETECT_PIN -1 //PB6) // EXP2-4 +#define BEEPER_PIN PG10 // EXP1-1 +#define LCD_PINS_RS PG9 // EXP1-4 +#define LCD_PINS_ENABLE PD7 // EXP1-3 +#define LCD_PINS_D4 PD1 // EXP1-5 +#define LCD_PINS_D5 PF0 // EXP1-6 +#define LCD_PINS_D6 PD3 // EXP1-7 +#define LCD_PINS_D7 PD4 // EXP1-8 +#define BTN_EN1 PD6 // EXP2-5 +#define BTN_EN2 PD0 // EXP2-3 +#define BTN_ENC PG11 // EXP1-2 diff --git a/Marlin/src/pins/teensy2/pins_5DPRINT.h b/Marlin/src/pins/teensy2/pins_5DPRINT.h index 206e22bb9c..4ee74660ea 100644 --- a/Marlin/src/pins/teensy2/pins_5DPRINT.h +++ b/Marlin/src/pins/teensy2/pins_5DPRINT.h @@ -78,71 +78,71 @@ // // Servos // -#define SERVO0_PIN 41 -#define SERVO1_PIN 42 -#define SERVO2_PIN 43 -#define SERVO3_PIN 44 +#define SERVO0_PIN 41 +#define SERVO1_PIN 42 +#define SERVO2_PIN 43 +#define SERVO3_PIN 44 // // Limit Switches // -#define X_STOP_PIN 37 // E5 -#define Y_STOP_PIN 36 // E4 -#define Z_STOP_PIN 19 // E7 +#define X_STOP_PIN 37 // E5 +#define Y_STOP_PIN 36 // E4 +#define Z_STOP_PIN 19 // E7 // // Steppers // -#define X_STEP_PIN 28 // A0 -#define X_DIR_PIN 29 // A1 -#define X_ENABLE_PIN 17 // C7 +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 17 // C7 -#define Y_STEP_PIN 30 // A2 -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 13 // C3 +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 13 // C3 -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 12 // C2 +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 12 // C2 -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 11 // C1 +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 11 // C1 // // Digital Microstepping // -#define X_MS1_PIN 25 // B5 -#define X_MS2_PIN 26 // B6 -#define Y_MS1_PIN 9 // E1 -#define Y_MS2_PIN 8 // E0 -#define Z_MS1_PIN 7 // D7 -#define Z_MS2_PIN 6 // D6 -#define E0_MS1_PIN 5 // D5 -#define E0_MS2_PIN 4 // D4 +#define X_MS1_PIN 25 // B5 +#define X_MS2_PIN 26 // B6 +#define Y_MS1_PIN 9 // E1 +#define Y_MS2_PIN 8 // E0 +#define Z_MS1_PIN 7 // D7 +#define Z_MS2_PIN 6 // D6 +#define E0_MS1_PIN 5 // D5 +#define E0_MS2_PIN 4 // D4 // // Temperature Sensors // -#define TEMP_0_PIN 1 // F1 Analog Input -#define TEMP_BED_PIN 0 // F0 Analog Input +#define TEMP_0_PIN 1 // F1 Analog Input +#define TEMP_BED_PIN 0 // F0 Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 -#define HEATER_BED_PIN 14 // C4 +#define HEATER_0_PIN 15 // C5 +#define HEATER_BED_PIN 14 // C4 #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A + #define FAN_PIN 16 // C6 PWM3A #endif // // Misc. Functions // -#define SDSS 20 // B0 +#define SDSS 20 // B0 //DIGIPOTS slave addresses #ifndef DIGIPOT_I2C_ADDRESS_A - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for DIGIPOT 0x2C (0x58 <- 0x2C << 1) #endif diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h index 22ceb97540..f7597dbbae 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h @@ -77,50 +77,50 @@ // // Limit Switches // -#define X_STOP_PIN 35 // A7 -#define Y_STOP_PIN 34 // A6 -#define Z_STOP_PIN 33 // A5 +#define X_STOP_PIN 35 // A7 +#define Y_STOP_PIN 34 // A6 +#define Z_STOP_PIN 33 // A5 // // Steppers // -#define X_STEP_PIN 3 // D3 -#define X_DIR_PIN 5 // D5 -#define X_ENABLE_PIN 4 // D4 -#define X_ATT_PIN 2 // D2 +#define X_STEP_PIN 3 // D3 +#define X_DIR_PIN 5 // D5 +#define X_ENABLE_PIN 4 // D4 +#define X_ATT_PIN 2 // D2 -#define Y_STEP_PIN 7 // D7 -#define Y_DIR_PIN 9 // E1 -#define Y_ENABLE_PIN 8 // E0 -#define Y_ATT_PIN 6 // D6 +#define Y_STEP_PIN 7 // D7 +#define Y_DIR_PIN 9 // E1 +#define Y_ENABLE_PIN 8 // E0 +#define Y_ATT_PIN 6 // D6 -#define Z_STEP_PIN 11 // C1 -#define Z_DIR_PIN 13 // C3 -#define Z_ENABLE_PIN 12 // C2 -#define Z_ATT_PIN 10 // C0 +#define Z_STEP_PIN 11 // C1 +#define Z_DIR_PIN 13 // C3 +#define Z_ENABLE_PIN 12 // C2 +#define Z_ATT_PIN 10 // C0 -#define E0_STEP_PIN 15 // C5 -#define E0_DIR_PIN 17 // C7 -#define E0_ENABLE_PIN 16 // C6 -#define E0_ATT_PIN 14 // C4 +#define E0_STEP_PIN 15 // C5 +#define E0_DIR_PIN 17 // C7 +#define E0_ENABLE_PIN 16 // C6 +#define E0_ATT_PIN 14 // C4 // // Temperature Sensors // -#define TEMP_0_PIN 7 // F7 Analog Input -#define TEMP_BED_PIN 6 // F6 Analog Input +#define TEMP_0_PIN 7 // F7 Analog Input +#define TEMP_BED_PIN 6 // F6 Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 32 // A4 Extruder -#define HEATER_BED_PIN 18 // E6 Bed +#define HEATER_0_PIN 32 // A4 Extruder +#define HEATER_BED_PIN 18 // E6 Bed #ifndef FAN_PIN - #define FAN_PIN 31 // A3 Fan + #define FAN_PIN 31 // A3 Fan #endif // // Misc. Functions // -#define LED_PIN 19 // E7 +#define LED_PIN 19 // E7 diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h index 88b045b833..575428f097 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h @@ -84,55 +84,55 @@ // // Limit Switches // -#define X_STOP_PIN 45 // F7 -#define Y_STOP_PIN 12 // C2 -#define Z_STOP_PIN 36 // E4 +#define X_STOP_PIN 45 // F7 +#define Y_STOP_PIN 12 // C2 +#define Z_STOP_PIN 36 // E4 // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN - #define Z_MIN_PROBE_PIN 11 // C1 + #define Z_MIN_PROBE_PIN 11 // C1 #endif // // Steppers // -#define X_STEP_PIN 9 // E1 -#define X_DIR_PIN 8 // E0 -#define X_ENABLE_PIN 23 // B3 +#define X_STEP_PIN 9 // E1 +#define X_DIR_PIN 8 // E0 +#define X_ENABLE_PIN 23 // B3 -#define Y_STEP_PIN 7 // D7 -#define Y_DIR_PIN 6 // D6 -#define Y_ENABLE_PIN 20 // B0 +#define Y_STEP_PIN 7 // D7 +#define Y_DIR_PIN 6 // D6 +#define Y_ENABLE_PIN 20 // B0 -#define Z_STEP_PIN 5 // D5 -#define Z_DIR_PIN 4 // D4 -#define Z_ENABLE_PIN 37 // E5 +#define Z_STEP_PIN 5 // D5 +#define Z_DIR_PIN 4 // D4 +#define Z_ENABLE_PIN 37 // E5 -#define E0_STEP_PIN 47 // E3 -#define E0_DIR_PIN 46 // E2 -#define E0_ENABLE_PIN 25 // B5 +#define E0_STEP_PIN 47 // E3 +#define E0_DIR_PIN 46 // E2 +#define E0_ENABLE_PIN 25 // B5 // // Temperature Sensors // -#define TEMP_0_PIN 2 // F2 Analog Input -#define TEMP_1_PIN 1 // F1 Analog Input -#define TEMP_BED_PIN 0 // F0 Analog Input +#define TEMP_0_PIN 2 // F2 Analog Input +#define TEMP_1_PIN 1 // F1 Analog Input +#define TEMP_BED_PIN 0 // F0 Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 27 // B7 -#define HEATER_BED_PIN 26 // B6 Bed +#define HEATER_0_PIN 27 // B7 +#define HEATER_BED_PIN 26 // B6 Bed #ifndef FAN_PIN - #define FAN_PIN 16 // C6 Fan, PWM3A + #define FAN_PIN 16 // C6 Fan, PWM3A #endif // // Misc. Functions // -#define SDSS 20 // B0 -#define SD_DETECT_PIN 24 // B4 -#define LED_PIN 13 // C3 +#define SDSS 20 // B0 +#define SD_DETECT_PIN 24 // B4 +#define LED_PIN 13 // C3 diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h index 4f10e08084..68c548f833 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h @@ -74,95 +74,95 @@ // // Limit Switches // -#define X_STOP_PIN 47 // E3 -#define Y_STOP_PIN 20 // B0 SS -#define Z_STOP_PIN 36 // E4 +#define X_STOP_PIN 47 // E3 +#define Y_STOP_PIN 20 // B0 SS +#define Z_STOP_PIN 36 // E4 // // Steppers // -#define X_STEP_PIN 28 // A0 -#define X_DIR_PIN 29 // A1 -#define X_ENABLE_PIN 19 // E7 +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 -#define Y_STEP_PIN 30 // A2 -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 18 // E6 +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 17 // C7 +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 13 // C3 +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input -#define TEMP_BED_PIN 0 // Analog Input +#define TEMP_0_PIN 1 // Analog Input +#define TEMP_BED_PIN 0 // Analog Input // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 PWM3B - Extruder -#define HEATER_1_PIN 44 // F6 -#define HEATER_2_PIN 45 // F7 -#define HEATER_BED_PIN 14 // C4 PWM3C +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_1_PIN 44 // F6 +#define HEATER_2_PIN 45 // F7 +#define HEATER_BED_PIN 14 // C4 PWM3C #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A + #define FAN_PIN 16 // C6 PWM3A #endif // // Misc. Functions // -#define SDSS 26 // B6 SDCS -#define FILWIDTH_PIN 2 // Analog Input +#define SDSS 26 // B6 SDCS +#define FILWIDTH_PIN 2 // Analog Input // // LCD / Controller // #if BOTH(ULTRA_LCD, NEWPANEL) - #define LCD_PINS_RS 9 // E1 JP11-11 - #define LCD_PINS_ENABLE 8 // E0 JP11-10 - #define LCD_PINS_D4 7 // D7 JP11-8 - #define LCD_PINS_D5 6 // D6 JP11-7 - #define LCD_PINS_D6 5 // D5 JP11-6 - #define LCD_PINS_D7 4 // D4 JP11-5 + #define LCD_PINS_RS 9 // E1 JP11-11 + #define LCD_PINS_ENABLE 8 // E0 JP11-10 + #define LCD_PINS_D4 7 // D7 JP11-8 + #define LCD_PINS_D5 6 // D6 JP11-7 + #define LCD_PINS_D6 5 // D5 JP11-6 + #define LCD_PINS_D7 4 // D4 JP11-5 #if ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 8 // E0 JP11-10 + #define BEEPER_PIN 8 // E0 JP11-10 - #define DOGLCD_A0 40 // F2 JP2-2 - #define DOGLCD_CS 41 // F3 JP2-4 + #define DOGLCD_A0 40 // F2 JP2-2 + #define DOGLCD_CS 41 // F3 JP2-4 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 2 // D2 TX1 JP2-5 - #define BTN_EN2 3 // D3 RX1 JP2-7 - #define BTN_ENC 45 // F7 TDI JP2-12 + #define BTN_EN1 2 // D2 TX1 JP2-5 + #define BTN_EN2 3 // D3 RX1 JP2-7 + #define BTN_ENC 45 // F7 TDI JP2-12 #undef SDSS - #define SDSS 43 // F5 TMS JP2-8 + #define SDSS 43 // F5 TMS JP2-8 - #define STAT_LED_RED_PIN 12 // C2 JP11-14 - #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 + #define STAT_LED_RED_PIN 12 // C2 JP11-14 + #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 #elif ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 3 // D3 RX1 JP2-7 - #define BTN_EN2 2 // D2 TX1 JP2-5 - #define BTN_ENC 41 // F3 JP2-4 + #define BTN_EN1 3 // D3 RX1 JP2-7 + #define BTN_EN2 2 // D2 TX1 JP2-5 + #define BTN_ENC 41 // F3 JP2-4 #undef SDSS - #define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2 + #define SDSS 38 // F0 B-THERM connector - use SD card on Panelolu2 #else - #define BTN_EN1 10 // C0 JP11-12 - #define BTN_EN2 11 // C1 JP11-13 - #define BTN_ENC 12 // C2 JP11-14 + #define BTN_EN1 10 // C0 JP11-12 + #define BTN_EN2 11 // C1 JP11-13 + #define BTN_ENC 12 // C2 JP11-14 #endif diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index c1198a4d4b..f5f05ddeaf 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -99,46 +99,46 @@ // // Limit Switches // -#define X_STOP_PIN 47 // E3 -#define Y_STOP_PIN 24 // B4 PWM2A -#define Z_STOP_PIN 36 // E4 +#define X_STOP_PIN 47 // E3 +#define Y_STOP_PIN 24 // B4 PWM2A +#define Z_STOP_PIN 36 // E4 // // Steppers // -#define X_STEP_PIN 28 // A0 -#define X_DIR_PIN 29 // A1 -#define X_ENABLE_PIN 19 // E7 +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 -#define Y_STEP_PIN 30 // A2 -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 18 // E6 +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 17 // C7 +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 13 // C3 +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 #if DISABLED(NO_EXTRUDRBOARD) #if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) - #define E1_STEP_PIN 25 // B5 - #define E1_DIR_PIN 37 // E5 - #define E1_ENABLE_PIN 42 // F4 + #define E1_STEP_PIN 25 // B5 + #define E1_DIR_PIN 37 // E5 + #define E1_ENABLE_PIN 42 // F4 - #define E2_STEP_PIN 2 // D2 - #define E2_DIR_PIN 3 // D3 - #define E2_ENABLE_PIN 43 // F5 + #define E2_STEP_PIN 2 // D2 + #define E2_DIR_PIN 3 // D3 + #define E2_ENABLE_PIN 43 // F5 #else - #define E1_STEP_PIN 2 // D2 - #define E1_DIR_PIN 3 // D3 - #define E1_ENABLE_PIN 43 // F5 + #define E1_STEP_PIN 2 // D2 + #define E1_DIR_PIN 3 // D3 + #define E1_ENABLE_PIN 43 // F5 - #define E2_STEP_PIN 25 // B5 - #define E2_DIR_PIN 37 // E5 - #define E2_ENABLE_PIN 42 // F4 + #define E2_STEP_PIN 25 // B5 + #define E2_DIR_PIN 37 // E5 + #define E2_ENABLE_PIN 42 // F4 #endif #endif // NO_EXTRUDRBOARD @@ -154,46 +154,46 @@ #define DAC_STEPPER_ORDER { 3, 2, 1, 0 } #define DAC_STEPPER_SENSE 0.11 -#define DAC_STEPPER_ADDRESS 0 -#define DAC_STEPPER_MAX 3520 -#define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V -#define DAC_STEPPER_GAIN 0 -#define DAC_OR_ADDRESS 0x00 +#define DAC_STEPPER_ADDRESS 0 +#define DAC_STEPPER_MAX 3520 +#define DAC_STEPPER_VREF 1 // internal Vref, gain 1x = 2.048V +#define DAC_STEPPER_GAIN 0 +#define DAC_OR_ADDRESS 0x00 // // Temperature Sensors // -#define TEMP_0_PIN 1 // Analog Input (Extruder) -#define TEMP_BED_PIN 0 // Analog Input (Bed) +#define TEMP_0_PIN 1 // Analog Input (Extruder) +#define TEMP_BED_PIN 0 // Analog Input (Bed) #if DISABLED(NO_EXTRUDRBOARD) #if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) - #define TEMP_1_PIN 2 // Analog Input (Extrudrboard A THERM) - #define TEMP_2_PIN 3 // Analog Input (Extrudrboard B THERM) + #define TEMP_1_PIN 2 // Analog Input (Extrudrboard A THERM) + #define TEMP_2_PIN 3 // Analog Input (Extrudrboard B THERM) #else - #define TEMP_1_PIN 3 // Analog Input (Extrudrboard B THERM) - #define TEMP_2_PIN 2 // Analog Input (Extrudrboard A THERM) + #define TEMP_1_PIN 3 // Analog Input (Extrudrboard B THERM) + #define TEMP_2_PIN 2 // Analog Input (Extrudrboard A THERM) #endif #endif // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 PWM3B - Extruder -#define HEATER_BED_PIN 14 // C4 PWM3C +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C #if DISABLED(NO_EXTRUDRBOARD) #if DISABLED(NO_EXTRUDRBOARD_OUTPUT_SWAP) - #define HEATER_1_PIN 44 // F6 - Extrudrboard A HOTEND - #define HEATER_2_PIN 45 // F7 - Extrudrboard B HOTEND + #define HEATER_1_PIN 44 // F6 - Extrudrboard A HOTEND + #define HEATER_2_PIN 45 // F7 - Extrudrboard B HOTEND #else - #define HEATER_1_PIN 45 // F7 - Extrudrboard B HOTEND - #define HEATER_2_PIN 44 // F6 - Extrudrboard A HOTEND + #define HEATER_1_PIN 45 // F7 - Extrudrboard B HOTEND + #define HEATER_2_PIN 44 // F6 - Extrudrboard A HOTEND #endif #endif #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A + #define FAN_PIN 16 // C6 PWM3A #endif // @@ -202,49 +202,49 @@ //#define USE_INTERNAL_SD #if HAS_SPI_LCD - #define LCD_PINS_RS 9 // E1 JP11-11 - #define LCD_PINS_ENABLE 8 // E0 JP11-10 - #define LCD_PINS_D4 7 // D7 JP11-8 - #define LCD_PINS_D5 6 // D6 JP11-7 - #define LCD_PINS_D6 5 // D5 JP11-6 - #define LCD_PINS_D7 4 // D4 JP11-5 + #define LCD_PINS_RS 9 // E1 JP11-11 + #define LCD_PINS_ENABLE 8 // E0 JP11-10 + #define LCD_PINS_D4 7 // D7 JP11-8 + #define LCD_PINS_D5 6 // D6 JP11-7 + #define LCD_PINS_D6 5 // D5 JP11-6 + #define LCD_PINS_D7 4 // D4 JP11-5 #if ANY(VIKI2, miniVIKI) - #define BEEPER_PIN 8 // E0 JP11-10 - #define DOGLCD_A0 40 // F2 JP2-2 - #define DOGLCD_CS 41 // F3 JP2-4 + #define BEEPER_PIN 8 // E0 JP11-10 + #define DOGLCD_A0 40 // F2 JP2-2 + #define DOGLCD_CS 41 // F3 JP2-4 #define LCD_SCREEN_ROT_180 - #define BTN_EN1 2 // D2 TX1 JP2-5 - #define BTN_EN2 3 // D3 RX1 JP2-7 - #define BTN_ENC 45 // F7 TDI JP2-12 + #define BTN_EN1 2 // D2 TX1 JP2-5 + #define BTN_EN2 3 // D3 RX1 JP2-7 + #define BTN_ENC 45 // F7 TDI JP2-12 - #define SDSS 3 // F5 TMS JP2-8 + #define SDSS 3 // F5 TMS JP2-8 - #define STAT_LED_RED_PIN 12 // C2 JP11-14 - #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 + #define STAT_LED_RED_PIN 12 // C2 JP11-14 + #define STAT_LED_BLUE_PIN 10 // C0 JP11-12 #elif ENABLED(MINIPANEL) #if DISABLED(USE_INTERNAL_SD) // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# - #define SDSS 11 // 36 C1 EXP2-13 EXP2-07 - #define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04 + #define SDSS 11 // 36 C1 EXP2-13 EXP2-07 + #define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04 #endif // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN# - #define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04 - #define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05 - #define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09 - #define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10 - #define KILL_PIN 8 // 33 E0 EXP2-10 EXP2-03 - #define BTN_EN1 10 // 35 C0 EXP2-12 EXP2-06 - #define BTN_EN2 12 // 37 C2 EXP2-14 EXP2-08 - //#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented - //#define SCK 21 // 11 B1 ICSP-04 EXP2-09 - //#define MOSI 22 // 12 B2 ICSP-03 EXP2-05 - //#define MISO 23 // 13 B3 ICSP-06 EXP2-05 + #define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04 + #define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05 + #define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09 + #define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10 + #define KILL_PIN 8 // 33 E0 EXP2-10 EXP2-03 + #define BTN_EN1 10 // 35 C0 EXP2-12 EXP2-06 + #define BTN_EN2 12 // 37 C2 EXP2-14 EXP2-08 + //#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented + //#define SCK 21 // 11 B1 ICSP-04 EXP2-09 + //#define MOSI 22 // 12 B2 ICSP-03 EXP2-05 + //#define MISO 23 // 13 B3 ICSP-06 EXP2-05 // increase delays #define BOARD_ST7920_DELAY_1 DELAY_NS(313) @@ -253,9 +253,9 @@ #else - #define BTN_EN1 10 // C0 JP11-12 - #define BTN_EN2 11 // C1 JP11-13 - #define BTN_ENC 12 // C2 JP11-14 + #define BTN_EN1 10 // C0 JP11-12 + #define BTN_EN2 11 // C1 JP11-13 + #define BTN_ENC 12 // C2 JP11-14 #endif @@ -266,7 +266,7 @@ // // PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. #ifndef SDSS - #define SDSS 20 // 10 B0 + #define SDSS 20 // 10 B0 #endif /** @@ -277,5 +277,5 @@ * which will let you use Channel B on the Extrudrboard as E1. */ #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 2 // Analog Input + #define FILWIDTH_PIN 2 // Analog Input #endif diff --git a/Marlin/src/pins/teensy2/pins_SAV_MKI.h b/Marlin/src/pins/teensy2/pins_SAV_MKI.h index 0ced699938..01003b056d 100644 --- a/Marlin/src/pins/teensy2/pins_SAV_MKI.h +++ b/Marlin/src/pins/teensy2/pins_SAV_MKI.h @@ -73,56 +73,56 @@ // // Servos // -#define SERVO0_PIN 39 // F1 In teensy's pin definition for pinMode (in servo.cpp) +#define SERVO0_PIN 39 // F1 In teensy's pin definition for pinMode (in servo.cpp) // // Limit Switches // -#define X_STOP_PIN 25 // B5 -#define Y_STOP_PIN 26 // B6 -//#define Z_STOP_PIN 27 // B7 -#define Z_STOP_PIN 36 // E4 For inductive sensor. -//#define E_STOP_PIN 36 // E4 +#define X_STOP_PIN 25 // B5 +#define Y_STOP_PIN 26 // B6 +//#define Z_STOP_PIN 27 // B7 +#define Z_STOP_PIN 36 // E4 For inductive sensor. +//#define E_STOP_PIN 36 // E4 // // Steppers // -#define X_STEP_PIN 28 // A0 -#define X_DIR_PIN 29 // A1 -#define X_ENABLE_PIN 19 // E7 +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 -#define Y_STEP_PIN 30 // A2 -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 18 // E6 +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 17 // C7 +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 13 // C3 +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 // // Temperature Sensors // -#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) -#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) +#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) +#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 PWM3B - Extruder -#define HEATER_BED_PIN 14 // C4 PWM3C - Bed +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C - Bed #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A + #define FAN_PIN 16 // C6 PWM3A #endif // // Misc. Functions // -#define SDSS 20 // B0 +#define SDSS 20 // B0 // Extension header pin mapping // ---------------------------- @@ -133,53 +133,53 @@ // PWM-D24 A4 (An), IO // 5V GND // 12V GND -#define EXT_AUX_SCL_D0 0 // D0 PWM0B -#define EXT_AUX_SDA_D1 1 // D1 -#define EXT_AUX_RX1_D2 2 // D2 -#define EXT_AUX_TX1_D3 3 // D3 -#define EXT_AUX_PWM_D24 24 // B4 PWM2A -#define EXT_AUX_A0 0 // F0 Analog Input -#define EXT_AUX_A0_IO 38 // F0 Digital IO -#define EXT_AUX_A1 1 // F1 Analog Input -#define EXT_AUX_A1_IO 39 // F1 Digital IO -#define EXT_AUX_A2 2 // F2 Analog Input -#define EXT_AUX_A2_IO 40 // F2 Digital IO -#define EXT_AUX_A3 3 // F3 Analog Input -#define EXT_AUX_A3_IO 41 // F3 Digital IO -#define EXT_AUX_A4 4 // F4 Analog Input -#define EXT_AUX_A4_IO 42 // F4 Digital IO +#define EXT_AUX_SCL_D0 0 // D0 PWM0B +#define EXT_AUX_SDA_D1 1 // D1 +#define EXT_AUX_RX1_D2 2 // D2 +#define EXT_AUX_TX1_D3 3 // D3 +#define EXT_AUX_PWM_D24 24 // B4 PWM2A +#define EXT_AUX_A0 0 // F0 Analog Input +#define EXT_AUX_A0_IO 38 // F0 Digital IO +#define EXT_AUX_A1 1 // F1 Analog Input +#define EXT_AUX_A1_IO 39 // F1 Digital IO +#define EXT_AUX_A2 2 // F2 Analog Input +#define EXT_AUX_A2_IO 40 // F2 Digital IO +#define EXT_AUX_A3 3 // F3 Analog Input +#define EXT_AUX_A3_IO 41 // F3 Digital IO +#define EXT_AUX_A4 4 // F4 Analog Input +#define EXT_AUX_A4_IO 42 // F4 Digital IO // // LCD / Controller // -#define BEEPER_PIN -1 -#define LCD_PINS_RS -1 -#define LCD_PINS_ENABLE -1 +#define BEEPER_PIN -1 +#define LCD_PINS_RS -1 +#define LCD_PINS_ENABLE -1 #if ENABLED(SAV_3DLCD) // For LCD SHIFT register LCD - #define SR_DATA_PIN EXT_AUX_SDA_D1 - #define SR_CLK_PIN EXT_AUX_SCL_D0 + #define SR_DATA_PIN EXT_AUX_SDA_D1 + #define SR_CLK_PIN EXT_AUX_SCL_D0 #endif #if EITHER(SAV_3DLCD, SAV_3DGLCD) - #define BTN_EN1 EXT_AUX_A1_IO - #define BTN_EN2 EXT_AUX_A0_IO - #define BTN_ENC EXT_AUX_PWM_D24 + #define BTN_EN1 EXT_AUX_A1_IO + #define BTN_EN2 EXT_AUX_A0_IO + #define BTN_ENC EXT_AUX_PWM_D24 - #define KILL_PIN EXT_AUX_A2_IO - #define HOME_PIN EXT_AUX_A4_IO + #define KILL_PIN EXT_AUX_A2_IO + #define HOME_PIN EXT_AUX_A4_IO -#else // Use the expansion header for spindle control +#else // Use the expansion header for spindle control // // M3/M4/M5 - Spindle/Laser Control // - #define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A - #define SPINDLE_LASER_ENA_PIN 39 // F1 Pin should have a pullup! - #define SPINDLE_DIR_PIN 40 // F2 + #define SPINDLE_LASER_PWM_PIN 24 // B4 PWM2A + #define SPINDLE_LASER_ENA_PIN 39 // F1 Pin should have a pullup! + #define SPINDLE_DIR_PIN 40 // F2 - #define CASE_LIGHT_PIN 0 // D0 PWM0B + #define CASE_LIGHT_PIN 0 // D0 PWM0B #endif diff --git a/Marlin/src/pins/teensy2/pins_TEENSY2.h b/Marlin/src/pins/teensy2/pins_TEENSY2.h index 985cd46df4..eb116ee3e8 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSY2.h +++ b/Marlin/src/pins/teensy2/pins_TEENSY2.h @@ -116,70 +116,70 @@ // // Limit Switches // -#define X_STOP_PIN 2 // D2 -#define Y_STOP_PIN 3 // D3 -#define Z_STOP_PIN 4 // D4 +#define X_STOP_PIN 2 // D2 +#define Y_STOP_PIN 3 // D3 +#define Z_STOP_PIN 4 // D4 // // Steppers // -#define X_STEP_PIN 28 // A0 Marlin -#define X_DIR_PIN 29 // A1 Marlin -#define X_ENABLE_PIN 26 // B6 +#define X_STEP_PIN 28 // A0 Marlin +#define X_DIR_PIN 29 // A1 Marlin +#define X_ENABLE_PIN 26 // B6 -#define Y_STEP_PIN 30 // A2 Marlin -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 26 // B6 Shared w/x +#define Y_STEP_PIN 30 // A2 Marlin +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 26 // B6 Shared w/x -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 26 // B6 Shared w/x +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 26 // B6 Shared w/x -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 26 // B6 Shared w/x +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 26 // B6 Shared w/x // // Temperature Sensors // -#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) -#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) +#define TEMP_0_PIN 7 // F7 Analog Input (Extruder) +#define TEMP_BED_PIN 6 // F6 Analog Input (Bed) // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 PWM3B Extruder -#define HEATER_BED_PIN 14 // C4 PWM3C +#define HEATER_0_PIN 15 // C5 PWM3B Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A Fan + #define FAN_PIN 16 // C6 PWM3A Fan #endif // // Misc. Functions // -#define SDSS 20 // B0 -#define LED_PIN 6 // D6 -#define PS_ON_PIN 27 // B7 -#define CASE_LIGHT_PIN 1 // D1 PWM2B MUST BE HARDWARE PWM +#define SDSS 20 // B0 +#define LED_PIN 6 // D6 +#define PS_ON_PIN 27 // B7 +#define CASE_LIGHT_PIN 1 // D1 PWM2B MUST BE HARDWARE PWM // // LCD / Controller // #if ENABLED(ULTIPANEL) - #define LCD_PINS_RS 8 // E0 - #define LCD_PINS_ENABLE 9 // E1 - #define LCD_PINS_D4 10 // C0 - #define LCD_PINS_D5 11 // C1 - #define LCD_PINS_D6 12 // C2 - #define LCD_PINS_D7 13 // C3 - #define BTN_EN1 38 // F0 - #define BTN_EN2 39 // F1 - #define BTN_ENC 40 // F2 + #define LCD_PINS_RS 8 // E0 + #define LCD_PINS_ENABLE 9 // E1 + #define LCD_PINS_D4 10 // C0 + #define LCD_PINS_D5 11 // C1 + #define LCD_PINS_D6 12 // C2 + #define LCD_PINS_D7 13 // C3 + #define BTN_EN1 38 // F0 + #define BTN_EN2 39 // F1 + #define BTN_ENC 40 // F2 #endif // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_ENA_PIN 5 // D5 Pin should have a pullup! -#define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM -#define SPINDLE_DIR_PIN 7 // D7 +#define SPINDLE_LASER_ENA_PIN 5 // D5 Pin should have a pullup! +#define SPINDLE_LASER_PWM_PIN 0 // D0 PWM0B MUST BE HARDWARE PWM +#define SPINDLE_DIR_PIN 7 // D7 diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h index 72eb21c1aa..05f433cb89 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h +++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h @@ -82,82 +82,81 @@ // // Limit Switch definitions that match the SCHEMATIC // -//#define X_STOP_PIN 25 // B5 -//#define Y_STOP_PIN 26 // B6 -//#define Z_STOP_PIN 27 // B7 -//#define E_STOP_PIN 36 // E4 - +//#define X_STOP_PIN 25 // B5 +//#define Y_STOP_PIN 26 // B6 +//#define Z_STOP_PIN 27 // B7 +//#define E_STOP_PIN 36 // E4 // // Limit Switch definitions that match the SILKSCREEN // -#define X_STOP_PIN 26 // B6 -#define Y_STOP_PIN 27 // B7 -#define Z_STOP_PIN 36 // E4 -//#define E_STOP_PIN 25 // B5 +#define X_STOP_PIN 26 // B6 +#define Y_STOP_PIN 27 // B7 +#define Z_STOP_PIN 36 // E4 +//#define E_STOP_PIN 25 // B5 // // Steppers // -#define X_STEP_PIN 28 // A0 -#define X_DIR_PIN 29 // A1 -#define X_ENABLE_PIN 19 // E7 +#define X_STEP_PIN 28 // A0 +#define X_DIR_PIN 29 // A1 +#define X_ENABLE_PIN 19 // E7 -#define Y_STEP_PIN 30 // A2 -#define Y_DIR_PIN 31 // A3 -#define Y_ENABLE_PIN 18 // E6 +#define Y_STEP_PIN 30 // A2 +#define Y_DIR_PIN 31 // A3 +#define Y_ENABLE_PIN 18 // E6 -#define Z_STEP_PIN 32 // A4 -#define Z_DIR_PIN 33 // A5 -#define Z_ENABLE_PIN 17 // C7 +#define Z_STEP_PIN 32 // A4 +#define Z_DIR_PIN 33 // A5 +#define Z_ENABLE_PIN 17 // C7 -#define E0_STEP_PIN 34 // A6 -#define E0_DIR_PIN 35 // A7 -#define E0_ENABLE_PIN 13 // C3 +#define E0_STEP_PIN 34 // A6 +#define E0_DIR_PIN 35 // A7 +#define E0_ENABLE_PIN 13 // C3 // // Temperature Sensors // -#define TEMP_0_PIN 7 // Analog Input (Extruder) -#define TEMP_BED_PIN 6 // Analog Input (Bed) +#define TEMP_0_PIN 7 // Analog Input (Extruder) +#define TEMP_BED_PIN 6 // Analog Input (Bed) // // Heaters / Fans // -#define HEATER_0_PIN 15 // C5 PWM3B - Extruder -#define HEATER_BED_PIN 14 // C4 PWM3C +#define HEATER_0_PIN 15 // C5 PWM3B - Extruder +#define HEATER_BED_PIN 14 // C4 PWM3C #ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A + #define FAN_PIN 16 // C6 PWM3A #endif // // Misc. Functions // -#define SDSS 20 // B0 JP31-6 -#define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B +#define SDSS 20 // B0 JP31-6 +#define CASE_LIGHT_PIN 0 // D0 IO-14 PWM0B // // LCD / Controller // #if BOTH(ULTRA_LCD, NEWPANEL) - #define BEEPER_PIN -1 + #define BEEPER_PIN -1 #if ENABLED(LCD_I2C_PANELOLU2) - #define BTN_EN1 3 // D3 IO-8 - #define BTN_EN2 2 // D2 IO-10 - #define BTN_ENC 41 // F3 IO-7 - #define SDSS 38 // F0 IO-13 use SD card on Panelolu2 + #define BTN_EN1 3 // D3 IO-8 + #define BTN_EN2 2 // D2 IO-10 + #define BTN_ENC 41 // F3 IO-7 + #define SDSS 38 // F0 IO-13 use SD card on Panelolu2 #endif - #define SD_DETECT_PIN -1 + #define SD_DETECT_PIN -1 #endif // HAS_SPI_LCD && NEWPANEL // // M3/M4/M5 - Spindle/Laser Control // -#define SPINDLE_LASER_PWM_PIN 24 // B4 IO-3 PWM2A - MUST BE HARDWARE PWM -#define SPINDLE_LASER_ENA_PIN 39 // F1 IO-11 - Pin should have a pullup! -#define SPINDLE_DIR_PIN 40 // F2 IO-9 +#define SPINDLE_LASER_PWM_PIN 24 // B4 IO-3 PWM2A - MUST BE HARDWARE PWM +#define SPINDLE_LASER_ENA_PIN 39 // F1 IO-11 - Pin should have a pullup! +#define SPINDLE_DIR_PIN 40 // F2 IO-9 diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index 6c43c4aaa8..0f895c9e6b 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -35,87 +35,87 @@ #define BOARD_INFO_NAME "Teensy3.2" #endif -#define AT90USB 1286 // Disable MarlinSerial etc. +#define AT90USB 1286 // Disable MarlinSerial etc. #define USBCON //1286 // Disable MarlinSerial etc. // // Limit Switches // -#define X_STOP_PIN 3 -#define Y_STOP_PIN 4 -#define Z_STOP_PIN 5 +#define X_STOP_PIN 3 +#define Y_STOP_PIN 4 +#define Z_STOP_PIN 5 // // Steppers // -#define X_STEP_PIN 5 -#define X_DIR_PIN 6 -#define X_ENABLE_PIN 2 +#define X_STEP_PIN 5 +#define X_DIR_PIN 6 +#define X_ENABLE_PIN 2 -#define Y_STEP_PIN 7 -#define Y_DIR_PIN 8 -#define Y_ENABLE_PIN 2 +#define Y_STEP_PIN 7 +#define Y_DIR_PIN 8 +#define Y_ENABLE_PIN 2 -#define Z_STEP_PIN 9 -#define Z_DIR_PIN 10 -#define Z_ENABLE_PIN 2 +#define Z_STEP_PIN 9 +#define Z_DIR_PIN 10 +#define Z_ENABLE_PIN 2 -#define E0_STEP_PIN 11 -#define E0_DIR_PIN 12 -#define E0_ENABLE_PIN 2 +#define E0_STEP_PIN 11 +#define E0_DIR_PIN 12 +#define E0_ENABLE_PIN 2 -//#define E1_STEP_PIN 33 -//#define E1_DIR_PIN 34 -//#define E1_ENABLE_PIN 35 +//#define E1_STEP_PIN 33 +//#define E1_DIR_PIN 34 +//#define E1_ENABLE_PIN 35 // // Heaters / Fans // -#define HEATER_0_PIN 20 +#define HEATER_0_PIN 20 // #define HEATER_1_PIN 36 -#define HEATER_BED_PIN 21 +#define HEATER_BED_PIN 21 #ifndef FAN_PIN - #define FAN_PIN 22 + #define FAN_PIN 22 #endif // // Temperature Sensors // -#define TEMP_0_PIN 14 // Analog Input - Extruder 2 => A2 -//#define TEMP_1_PIN 0 // Analog Input -#define TEMP_BED_PIN 15 // Analog Input - Bed +#define TEMP_0_PIN 14 // Analog Input - Extruder 2 => A2 +//#define TEMP_1_PIN 0 // Analog Input +#define TEMP_BED_PIN 15 // Analog Input - Bed #ifndef FILWIDTH_PIN - #define FILWIDTH_PIN 6 // Analog Input + #define FILWIDTH_PIN 6 // Analog Input #endif // // Misc. Functions // -//#define SDSS 16 // 8 -#define LED_PIN 13 +//#define SDSS 16 // 8 +#define LED_PIN 13 -//#define SOL1_PIN 28 +//#define SOL1_PIN 28 // // LCD / Controller // -//#define SCK_PIN 13 -//#define MISO_PIN 12 -//#define MOSI_PIN 11 +//#define SCK_PIN 13 +//#define MISO_PIN 12 +//#define MOSI_PIN 11 /* #if HAS_SPI_LCD - #define LCD_PINS_RS 40 - #define LCD_PINS_ENABLE 41 - #define LCD_PINS_D4 42 - #define LCD_PINS_D5 43 - #define LCD_PINS_D6 44 - #define LCD_PINS_D7 45 - #define BTN_EN1 46 - #define BTN_EN2 47 - #define BTN_ENC 48 + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 41 + #define LCD_PINS_D4 42 + #define LCD_PINS_D5 43 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 45 + #define BTN_EN1 46 + #define BTN_EN2 47 + #define BTN_ENC 48 #endif */ diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 28fd51b8a0..8528533d7b 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -37,7 +37,7 @@ #define BOARD_INFO_NAME "Teensy3.6" #endif -#define AT90USB 1286 // Disable MarlinSerial etc. +#define AT90USB 1286 // Disable MarlinSerial etc. #define USBCON //1286 // Disable MarlinSerial etc. /* @@ -83,80 +83,80 @@ D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM // // Limit Switches // -#define X_STOP_PIN 24 -#define Y_STOP_PIN 26 -#define Z_STOP_PIN 28 +#define X_STOP_PIN 24 +#define Y_STOP_PIN 26 +#define Z_STOP_PIN 28 // // Steppers // -#define X_STEP_PIN 22 -#define X_DIR_PIN 21 -#define X_ENABLE_PIN 39 +#define X_STEP_PIN 22 +#define X_DIR_PIN 21 +#define X_ENABLE_PIN 39 -#define Y_STEP_PIN 19 -#define Y_DIR_PIN 18 -#define Y_ENABLE_PIN 20 +#define Y_STEP_PIN 19 +#define Y_DIR_PIN 18 +#define Y_ENABLE_PIN 20 -#define Z_STEP_PIN 38 -#define Z_DIR_PIN 37 -#define Z_ENABLE_PIN 17 +#define Z_STEP_PIN 38 +#define Z_DIR_PIN 37 +#define Z_ENABLE_PIN 17 -#define E0_STEP_PIN 31 -#define E0_DIR_PIN 30 -#define E0_ENABLE_PIN 32 +#define E0_STEP_PIN 31 +#define E0_DIR_PIN 30 +#define E0_ENABLE_PIN 32 -#define E1_STEP_PIN 33 -#define E1_DIR_PIN 34 -#define E1_ENABLE_PIN 35 +#define E1_STEP_PIN 33 +#define E1_DIR_PIN 34 +#define E1_ENABLE_PIN 35 -#define HEATER_0_PIN 30 -#define HEATER_1_PIN 36 -#define HEATER_BED_PIN 31 +#define HEATER_0_PIN 30 +#define HEATER_1_PIN 36 +#define HEATER_BED_PIN 31 #ifndef FAN_PIN - #define FAN_PIN 2 + #define FAN_PIN 2 #endif -#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 -#define TEMP_1_PIN 0 -#define TEMP_BED_PIN 1 // Bed / Analog pin numbering +#define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 +#define TEMP_1_PIN 0 +#define TEMP_BED_PIN 1 // Bed / Analog pin numbering -#define SDSS 39 // 8 -#define LED_PIN 13 -#define PS_ON_PIN 1 -#define ALARM_PIN -1 +#define SDSS 39 // 8 +#define LED_PIN 13 +#define PS_ON_PIN 1 +#define ALARM_PIN -1 -#define FILWIDTH_PIN 6 -#define SOL1_PIN 28 +#define FILWIDTH_PIN 6 +#define SOL1_PIN 28 #if 0 // Pretty sure this is obsolete! // Please use Marlin 1.1.x pins files as reference for new pins files. #ifndef SDSUPPORT // these are defined in the SD library if building with SD support - #define SCK_PIN 13 - #define MISO_PIN 12 - #define MOSI_PIN 11 + #define SCK_PIN 13 + #define MISO_PIN 12 + #define MOSI_PIN 11 #endif #endif #if HAS_SPI_LCD - #define LCD_PINS_RS 40 - #define LCD_PINS_ENABLE 41 - #define LCD_PINS_D4 42 - #define LCD_PINS_D5 43 - #define LCD_PINS_D6 44 - #define LCD_PINS_D7 45 + #define LCD_PINS_RS 40 + #define LCD_PINS_ENABLE 41 + #define LCD_PINS_D4 42 + #define LCD_PINS_D5 43 + #define LCD_PINS_D6 44 + #define LCD_PINS_D7 45 #endif #if ENABLED(NEWPANEL) - #define BTN_EN1 46 - #define BTN_EN2 47 - #define BTN_ENC 48 + #define BTN_EN1 46 + #define BTN_EN2 47 + #define BTN_ENC 48 #endif #if ENABLED(REPRAPWORLD_KEYPAD) - #define SHIFT_OUT 40 - #define SHIFT_CLK 44 - #define SHIFT_LD 42 + #define SHIFT_OUT 40 + #define SHIFT_CLK 44 + #define SHIFT_LD 42 #endif