Indentation of a SW SPI file
This commit is contained in:
Scott Lahteine
parent
1a827d5b68
commit
2c4e03d2cf
|
|
@ -57,25 +57,26 @@
|
|||
|
||||
#ifdef __SAM3X8E__
|
||||
|
||||
#include <U8glib.h>
|
||||
#include <Arduino.h>
|
||||
#include "../../core/macros.h"
|
||||
#include <U8glib.h>
|
||||
#include <Arduino.h>
|
||||
#include "../../core/macros.h"
|
||||
|
||||
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
|
||||
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
|
||||
g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
|
||||
}
|
||||
void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index) {
|
||||
PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
|
||||
g_APinDescription[u8g->pin_list[pin_index]].ulPin, g_APinDescription[u8g->pin_list[pin_index]].ulPinConfiguration); // OUTPUT
|
||||
}
|
||||
|
||||
void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
|
||||
volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
|
||||
uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
|
||||
if (level) port->PIO_SODR = mask;
|
||||
else port->PIO_CODR = mask;
|
||||
}
|
||||
void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
|
||||
volatile Pio* port = g_APinDescription[u8g->pin_list[pin_index]].pPort;
|
||||
uint32_t mask = g_APinDescription[u8g->pin_list[pin_index]].ulPin;
|
||||
if (level) port->PIO_SODR = mask;
|
||||
else port->PIO_CODR = mask;
|
||||
}
|
||||
|
||||
#define nop() __asm__ __volatile__("nop;\n\t":::)
|
||||
|
||||
void __delay_4cycles(uint32_t cy) __attribute__ ((weak));
|
||||
|
||||
FORCE_INLINE void __delay_4cycles(uint32_t cy) { // +1 cycle
|
||||
#if ARCH_PIPELINE_RELOAD_CYCLES<2
|
||||
#define EXTRA_NOP_CYCLES "nop"
|
||||
|
|
@ -96,107 +97,107 @@ FORCE_INLINE void __delay_4cycles(uint32_t cy) { // +1 cycle
|
|||
);
|
||||
}
|
||||
|
||||
Pio *SCK_pPio, *MOSI_pPio;
|
||||
uint32_t SCK_dwMask, MOSI_dwMask;
|
||||
Pio *SCK_pPio, *MOSI_pPio;
|
||||
uint32_t SCK_dwMask, MOSI_dwMask;
|
||||
|
||||
static void spiSend_sw_DUE(uint8_t val) { // 800KHz
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
if (val & 0x80)
|
||||
MOSI_pPio->PIO_SODR = MOSI_dwMask;
|
||||
else
|
||||
MOSI_pPio->PIO_CODR = MOSI_dwMask;
|
||||
val = val << 1;
|
||||
__delay_4cycles(2);
|
||||
SCK_pPio->PIO_SODR = SCK_dwMask;
|
||||
__delay_4cycles(22);
|
||||
SCK_pPio->PIO_CODR = SCK_dwMask;
|
||||
}
|
||||
static void spiSend_sw_DUE(uint8_t val) { // 800KHz
|
||||
for (uint8_t i = 0; i < 8; i++) {
|
||||
if (val & 0x80)
|
||||
MOSI_pPio->PIO_SODR = MOSI_dwMask;
|
||||
else
|
||||
MOSI_pPio->PIO_CODR = MOSI_dwMask;
|
||||
val = val << 1;
|
||||
__delay_4cycles(2);
|
||||
SCK_pPio->PIO_SODR = SCK_dwMask;
|
||||
__delay_4cycles(22);
|
||||
SCK_pPio->PIO_CODR = SCK_dwMask;
|
||||
}
|
||||
}
|
||||
|
||||
static uint8_t rs_last_state = 255;
|
||||
|
||||
static void u8g_com_DUE_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
|
||||
uint8_t i;
|
||||
|
||||
if ( rs != rs_last_state) { // time to send a command/data byte
|
||||
rs_last_state = rs;
|
||||
|
||||
if ( rs == 0 )
|
||||
/* command */
|
||||
spiSend_sw_DUE(0x0f8);
|
||||
else
|
||||
/* data */
|
||||
spiSend_sw_DUE(0x0fa);
|
||||
|
||||
for( i = 0; i < 4; i++ ) // give the controller some time to process the data
|
||||
u8g_10MicroDelay(); // 2 is bad, 3 is OK, 4 is safe
|
||||
}
|
||||
|
||||
static uint8_t rs_last_state = 255;
|
||||
|
||||
static void u8g_com_DUE_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
|
||||
uint8_t i;
|
||||
|
||||
if ( rs != rs_last_state) { // time to send a command/data byte
|
||||
rs_last_state = rs;
|
||||
|
||||
if ( rs == 0 )
|
||||
/* command */
|
||||
spiSend_sw_DUE(0x0f8);
|
||||
else
|
||||
/* data */
|
||||
spiSend_sw_DUE(0x0fa);
|
||||
|
||||
for( i = 0; i < 4; i++ ) // give the controller some time to process the data
|
||||
u8g_10MicroDelay(); // 2 is bad, 3 is OK, 4 is safe
|
||||
}
|
||||
|
||||
spiSend_sw_DUE(val & 0x0f0);
|
||||
spiSend_sw_DUE(val << 4);
|
||||
}
|
||||
spiSend_sw_DUE(val & 0x0f0);
|
||||
spiSend_sw_DUE(val << 4);
|
||||
}
|
||||
|
||||
|
||||
uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
||||
switch (msg) {
|
||||
case U8G_COM_MSG_INIT:
|
||||
SCK_pPio = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].pPort;
|
||||
SCK_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].ulPin;
|
||||
MOSI_pPio = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].pPort;
|
||||
MOSI_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].ulPin;
|
||||
uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
||||
switch (msg) {
|
||||
case U8G_COM_MSG_INIT:
|
||||
SCK_pPio = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].pPort;
|
||||
SCK_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_SCK]].ulPin;
|
||||
MOSI_pPio = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].pPort;
|
||||
MOSI_dwMask = g_APinDescription[u8g->pin_list[U8G_PI_MOSI]].ulPin;
|
||||
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, 0);
|
||||
u8g_SetPIOutput_DUE(u8g, U8G_PI_CS);
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);
|
||||
u8g_SetPIOutput_DUE(u8g, U8G_PI_SCK);
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 0);
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 1);
|
||||
u8g_SetPIOutput_DUE(u8g, U8G_PI_MOSI);
|
||||
u8g_Delay(5);
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
|
||||
break;
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, 0);
|
||||
u8g_SetPIOutput_DUE(u8g, U8G_PI_CS);
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);
|
||||
u8g_SetPIOutput_DUE(u8g, U8G_PI_SCK);
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 0);
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_MOSI, 1);
|
||||
u8g_SetPIOutput_DUE(u8g, U8G_PI_MOSI);
|
||||
u8g_Delay(5);
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_RESET:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel_DUE(u8g, U8G_PI_RESET, arg_val);
|
||||
break;
|
||||
case U8G_COM_MSG_RESET:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel_DUE(u8g, U8G_PI_RESET, arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
break;
|
||||
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
|
||||
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS])
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
|
||||
break;
|
||||
case U8G_COM_MSG_CHIP_SELECT:
|
||||
if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS])
|
||||
u8g_SetPILevel_DUE(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
case U8G_COM_MSG_WRITE_BYTE:
|
||||
|
||||
u8g_com_DUE_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
|
||||
break;
|
||||
u8g_com_DUE_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_DUE_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_DUE_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
break;
|
||||
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_DUE_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
case U8G_COM_MSG_WRITE_SEQ_P: {
|
||||
uint8_t *ptr = (uint8_t*) arg_ptr;
|
||||
while (arg_val > 0) {
|
||||
u8g_com_DUE_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
|
||||
arg_val--;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
#pragma GCC reset_options
|
||||
|
||||
|
|
|
|||
Loading…
Reference in a new issue