zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Prefix SD SPI pins (SCK, MISO, MOSI, SS) (#20606)

Browse source 
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
This commit is contained in:
Victor Oliveira 2021-01-01 17:31:15 -03:00 committed by Scott Lahteine
parent 7a748bd565
commit 2c58d0881b
109 changed files with 612 additions and 613 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/Configuration.h
View file

@ -1823,16 +1823,6 @@
*/ */
//#define SDSUPPORT //#define SDSUPPORT
/**
* SD CARD: SPI SPEED
*
* Enable one of the following items for a slower SPI transfer speed.
* This may be required to resolve "volume init" errors.
*/
//#define SPI_SPEED SPI_HALF_SPEED
//#define SPI_SPEED SPI_QUARTER_SPEED
//#define SPI_SPEED SPI_EIGHTH_SPEED
/** /**
* SD CARD: ENABLE CRC * SD CARD: ENABLE CRC
* *

10
Marlin/Configuration_adv.h
View file

@ -1182,6 +1182,16 @@
#endif #endif
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
/**
* SD Card SPI Speed
* May be required to resolve "volume init" errors.
*
* Enable and set to SPI_HALF_SPEED, SPI_QUARTER_SPEED, or SPI_EIGHTH_SPEED
* otherwise full speed will be applied.
*
* :['SPI_HALF_SPEED', 'SPI_QUARTER_SPEED', 'SPI_EIGHTH_SPEED']
*/
//#define SD_SPI_SPEED SPI_HALF_SPEED
// The standard SD detect circuit reads LOW when media is inserted and HIGH when empty. // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
// Enable this option and set to HIGH if your SD cards are incorrectly detected. // Enable this option and set to HIGH if your SD cards are incorrectly detected.

28
Marlin/src/HAL/AVR/HAL_SPI.cpp
View file

@ -34,17 +34,17 @@
#include "../../inc/MarlinConfig.h" #include "../../inc/MarlinConfig.h"
void spiBegin() { void spiBegin() {
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN); SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(MISO_PIN); SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(MOSI_PIN); SET_OUTPUT(SD_MOSI_PIN);
#if DISABLED(SOFTWARE_SPI) #if DISABLED(SOFTWARE_SPI)
// SS must be in output mode even it is not chip select // SS must be in output mode even it is not chip select
//SET_OUTPUT(SS_PIN); //SET_OUTPUT(SD_SS_PIN);
// set SS high - may be chip select for another SPI device // set SS high - may be chip select for another SPI device
//#if SET_SPI_SS_HIGH //#if SET_SPI_SS_HIGH
//WRITE(SS_PIN, HIGH); //WRITE(SD_SS_PIN, HIGH);
//#endif //#endif
// set a default rate // set a default rate
spiInit(1); spiInit(1);
@ -195,19 +195,19 @@ void spiBegin() {
// no interrupts during byte receive - about 8µs // no interrupts during byte receive - about 8µs
cli(); cli();
// output pin high - like sending 0xFF // output pin high - like sending 0xFF
WRITE(MOSI_PIN, HIGH); WRITE(SD_MOSI_PIN, HIGH);
LOOP_L_N(i, 8) { LOOP_L_N(i, 8) {
WRITE(SCK_PIN, HIGH); WRITE(SD_SCK_PIN, HIGH);
nop; // adjust so SCK is nice nop; // adjust so SCK is nice
nop; nop;
data <<= 1; data <<= 1;
if (READ(MISO_PIN)) data |= 1; if (READ(SD_MISO_PIN)) data |= 1;
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
} }
sei(); sei();
@ -225,10 +225,10 @@ void spiBegin() {
// no interrupts during byte send - about 8µs // no interrupts during byte send - about 8µs
cli(); cli();
LOOP_L_N(i, 8) { LOOP_L_N(i, 8) {
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
WRITE(MOSI_PIN, data & 0x80); WRITE(SD_MOSI_PIN, data & 0x80);
data <<= 1; data <<= 1;
WRITE(SCK_PIN, HIGH); WRITE(SD_SCK_PIN, HIGH);
} }
nop; // hold SCK high for a few ns nop; // hold SCK high for a few ns
@ -236,7 +236,7 @@ void spiBegin() {
nop; nop;
nop; nop;
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
sei(); sei();
} }

16
Marlin/src/HAL/AVR/spi_pins.h
View file

@ -51,15 +51,15 @@
#define AVR_SS_PIN 16 #define AVR_SS_PIN 16
#endif #endif
#ifndef SCK_PIN #ifndef SD_SCK_PIN
#define SCK_PIN AVR_SCK_PIN #define SD_SCK_PIN AVR_SCK_PIN
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN AVR_MISO_PIN #define SD_MISO_PIN AVR_MISO_PIN
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN AVR_MOSI_PIN #define SD_MOSI_PIN AVR_MOSI_PIN
#endif #endif
#ifndef SS_PIN #ifndef SD_SS_PIN
#define SS_PIN AVR_SS_PIN #define SD_SS_PIN AVR_SS_PIN
#endif #endif

88
Marlin/src/HAL/DUE/HAL_SPI.cpp
View file

@ -69,10 +69,10 @@
// run at ~8 .. ~10Mhz - Tx version (Rx data discarded) // run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0 static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30; /* SODR of port */ uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN); uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN); uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
uint32_t idx = 0; uint32_t idx = 0;
/* Negate bout, as the assembler requires a negated value */ /* Negate bout, as the assembler requires a negated value */
@ -154,9 +154,9 @@
static uint8_t spiTransferRx0(uint8_t) { // using Mode 0 static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
uint32_t bin = 0; uint32_t bin = 0;
uint32_t work = 0; uint32_t work = 0;
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN)); /* PDSR of port in bitband area */ uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN); uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
/* The software SPI routine */ /* The software SPI routine */
__asm__ __volatile__( __asm__ __volatile__(
@ -225,15 +225,15 @@
static uint8_t spiTransfer1(uint8_t b) { // using Mode 0 static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
int bits = 8; int bits = 8;
do { do {
WRITE(MOSI_PIN, b & 0x80); WRITE(SD_MOSI_PIN, b & 0x80);
b <<= 1; // little setup time b <<= 1; // little setup time
WRITE(SCK_PIN, HIGH); WRITE(SD_SCK_PIN, HIGH);
DELAY_NS(125); // 10 cycles @ 84mhz DELAY_NS(125); // 10 cycles @ 84mhz
b |= (READ(MISO_PIN) != 0); b |= (READ(SD_MISO_PIN) != 0);
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
DELAY_NS(125); // 10 cycles @ 84mhz DELAY_NS(125); // 10 cycles @ 84mhz
} while (--bits); } while (--bits);
return b; return b;
@ -245,15 +245,15 @@
static uint8_t spiTransferX(uint8_t b) { // using Mode 0 static uint8_t spiTransferX(uint8_t b) { // using Mode 0
int bits = 8; int bits = 8;
do { do {
WRITE(MOSI_PIN, b & 0x80); WRITE(SD_MOSI_PIN, b & 0x80);
b <<= 1; // little setup time b <<= 1; // little setup time
WRITE(SCK_PIN, HIGH); WRITE(SD_SCK_PIN, HIGH);
__delay_4cycles(spiDelayCyclesX4); __delay_4cycles(spiDelayCyclesX4);
b |= (READ(MISO_PIN) != 0); b |= (READ(SD_MISO_PIN) != 0);
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
__delay_4cycles(spiDelayCyclesX4); __delay_4cycles(spiDelayCyclesX4);
} while (--bits); } while (--bits);
return b; return b;
@ -271,10 +271,10 @@
// Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded) // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) { static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30; /* SODR of port */ uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN); uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN); uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
uint32_t work = 0; uint32_t work = 0;
uint32_t txval = 0; uint32_t txval = 0;
@ -352,9 +352,9 @@
static void spiRxBlock0(uint8_t* ptr, uint32_t todo) { static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
uint32_t bin = 0; uint32_t bin = 0;
uint32_t work = 0; uint32_t work = 0;
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN)); /* PDSR of port in bitband area */ uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
uint32_t SCK_MASK = PIN_MASK(SCK_PIN); uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
/* The software SPI routine */ /* The software SPI routine */
__asm__ __volatile__( __asm__ __volatile__(
@ -442,22 +442,22 @@
static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX; static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
#if MB(ALLIGATOR) #if MB(ALLIGATOR)
#define _SS_WRITE(S) WRITE(SS_PIN, S) #define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
#else #else
#define _SS_WRITE(S) NOOP #define _SS_WRITE(S) NOOP
#endif #endif
void spiBegin() { void spiBegin() {
SET_OUTPUT(SS_PIN); SET_OUTPUT(SD_SS_PIN);
_SS_WRITE(HIGH); _SS_WRITE(HIGH);
SET_OUTPUT(SCK_PIN); SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(MISO_PIN); SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(MOSI_PIN); SET_OUTPUT(SD_MOSI_PIN);
} }
uint8_t spiRec() { uint8_t spiRec() {
_SS_WRITE(LOW); _SS_WRITE(LOW);
WRITE(MOSI_PIN, HIGH); // Output 1s 1 WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
uint8_t b = spiTransferRx(0xFF); uint8_t b = spiTransferRx(0xFF);
_SS_WRITE(HIGH); _SS_WRITE(HIGH);
return b; return b;
@ -466,7 +466,7 @@
void spiRead(uint8_t* buf, uint16_t nbyte) { void spiRead(uint8_t* buf, uint16_t nbyte) {
if (nbyte) { if (nbyte) {
_SS_WRITE(LOW); _SS_WRITE(LOW);
WRITE(MOSI_PIN, HIGH); // Output 1s 1 WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
spiRxBlock(buf, nbyte); spiRxBlock(buf, nbyte);
_SS_WRITE(HIGH); _SS_WRITE(HIGH);
} }
@ -519,8 +519,8 @@
} }
_SS_WRITE(HIGH); _SS_WRITE(HIGH);
WRITE(MOSI_PIN, HIGH); WRITE(SD_MOSI_PIN, HIGH);
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
} }
/** Begin SPI transaction, set clock, bit order, data mode */ /** Begin SPI transaction, set clock, bit order, data mode */
@ -575,20 +575,20 @@
// Configure SPI pins // Configure SPI pins
PIO_Configure( PIO_Configure(
g_APinDescription[SCK_PIN].pPort, g_APinDescription[SD_SCK_PIN].pPort,
g_APinDescription[SCK_PIN].ulPinType, g_APinDescription[SD_SCK_PIN].ulPinType,
g_APinDescription[SCK_PIN].ulPin, g_APinDescription[SD_SCK_PIN].ulPin,
g_APinDescription[SCK_PIN].ulPinConfiguration); g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
PIO_Configure( PIO_Configure(
g_APinDescription[MOSI_PIN].pPort, g_APinDescription[SD_MOSI_PIN].pPort,
g_APinDescription[MOSI_PIN].ulPinType, g_APinDescription[SD_MOSI_PIN].ulPinType,
g_APinDescription[MOSI_PIN].ulPin, g_APinDescription[SD_MOSI_PIN].ulPin,
g_APinDescription[MOSI_PIN].ulPinConfiguration); g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
PIO_Configure( PIO_Configure(
g_APinDescription[MISO_PIN].pPort, g_APinDescription[SD_MISO_PIN].pPort,
g_APinDescription[MISO_PIN].ulPinType, g_APinDescription[SD_MISO_PIN].ulPinType,
g_APinDescription[MISO_PIN].ulPin, g_APinDescription[SD_MISO_PIN].ulPin,
g_APinDescription[MISO_PIN].ulPinConfiguration); g_APinDescription[SD_MISO_PIN].ulPinConfiguration);
// set master mode, peripheral select, fault detection // set master mode, peripheral select, fault detection
SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS); SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
@ -606,7 +606,7 @@
WRITE(SPI_EEPROM1_CS, HIGH); WRITE(SPI_EEPROM1_CS, HIGH);
WRITE(SPI_EEPROM2_CS, HIGH); WRITE(SPI_EEPROM2_CS, HIGH);
WRITE(SPI_FLASH_CS, HIGH); WRITE(SPI_FLASH_CS, HIGH);
WRITE(SS_PIN, HIGH); WRITE(SD_SS_PIN, HIGH);
OUT_WRITE(SDSS, LOW); OUT_WRITE(SDSS, LOW);

2
Marlin/src/HAL/DUE/inc/SanityCheck.h
View file

@ -40,7 +40,7 @@
* Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
* as the TMC2130 soft SPI the most common setup. * as the TMC2130 soft SPI the most common setup.
*/ */
#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN)) #define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
#if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130) #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
#if ENABLED(TMC_USE_SW_SPI) #if ENABLED(TMC_USE_SW_SPI)

20
Marlin/src/HAL/DUE/spi_pins.h
View file

@ -43,22 +43,22 @@
#define SPI_PIN 87 #define SPI_PIN 87
#define SPI_CHAN 1 #define SPI_CHAN 1
#endif #endif
#define SCK_PIN 76 #define SD_SCK_PIN 76
#define MISO_PIN 74 #define SD_MISO_PIN 74
#define MOSI_PIN 75 #define SD_MOSI_PIN 75
#else #else
// defaults // defaults
#define DUE_SOFTWARE_SPI #define DUE_SOFTWARE_SPI
#ifndef SCK_PIN #ifndef SD_SCK_PIN
#define SCK_PIN 52 #define SD_SCK_PIN 52
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN 50 #define SD_MISO_PIN 50
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN 51 #define SD_MOSI_PIN 51
#endif #endif
#endif #endif
/* A.28, A.29, B.21, C.26, C.29 */ /* A.28, A.29, B.21, C.26, C.29 */
#define SS_PIN SDSS #define SD_SS_PIN SDSS

6
Marlin/src/HAL/ESP32/HAL_SPI.cpp
View file

@ -53,11 +53,11 @@ static SPISettings spiConfig;
// ------------------------ // ------------------------
void spiBegin() { void spiBegin() {
#if !PIN_EXISTS(SS) #if !PIN_EXISTS(SD_SS)
#error "SS_PIN not defined!" #error "SD_SS_PIN not defined!"
#endif #endif
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
} }
void spiInit(uint8_t spiRate) { void spiInit(uint8_t spiRate) {

8
Marlin/src/HAL/ESP32/spi_pins.h
View file

@ -18,7 +18,7 @@
*/ */
#pragma once #pragma once
#define SS_PIN SDSS #define SD_SS_PIN SDSS
#define SCK_PIN 18 #define SD_SCK_PIN 18
#define MISO_PIN 19 #define SD_MISO_PIN 19
#define MOSI_PIN 23 #define SD_MOSI_PIN 23

33
Marlin/src/HAL/LINUX/spi_pins.h
View file

@ -24,31 +24,32 @@
#include "../../core/macros.h" #include "../../core/macros.h"
#include "../../inc/MarlinConfigPre.h" #include "../../inc/MarlinConfigPre.h"
#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) #if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different. // needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use // This requirement can be removed if the SPI access to these devices is updated to use
// spiBeginTransaction. // spiBeginTransaction.
#endif #endif
/** onboard SD card */ // Onboard SD
//#define SCK_PIN P0_07 //#define SD_SCK_PIN P0_07
//#define MISO_PIN P0_08 //#define SD_MISO_PIN P0_08
//#define MOSI_PIN P0_09 //#define SD_MOSI_PIN P0_09
//#define SS_PIN P0_06 //#define SD_SS_PIN P0_06
/** external */
#ifndef SCK_PIN // External SD
#define SCK_PIN 50 #ifndef SD_SCK_PIN
#define SD_SCK_PIN 50
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN 51 #define SD_MISO_PIN 51
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN 52 #define SD_MOSI_PIN 52
#endif #endif
#ifndef SS_PIN #ifndef SD_SS_PIN
#define SS_PIN 53 #define SD_SS_PIN 53
#endif #endif
#ifndef SDSS #ifndef SDSS
#define SDSS SS_PIN #define SDSS SD_SS_PIN
#endif #endif

43
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
View file

@ -55,27 +55,33 @@
#include <lpc17xx_pinsel.h> #include <lpc17xx_pinsel.h>
#include <lpc17xx_clkpwr.h> #include <lpc17xx_clkpwr.h>
#include "../shared/HAL_SPI.h"
// ------------------------ // ------------------------
// Public functions // Public functions
// ------------------------ // ------------------------
#if ENABLED(LPC_SOFTWARE_SPI) #if ENABLED(LPC_SOFTWARE_SPI)
#include <SoftwareSPI.h>
// Software SPI // Software SPI
static uint8_t SPI_speed = 0; #include <SoftwareSPI.h>
#ifndef HAL_SPI_SPEED
#define HAL_SPI_SPEED SPI_FULL_SPEED
#endif
static uint8_t SPI_speed = HAL_SPI_SPEED;
static uint8_t spiTransfer(uint8_t b) { static uint8_t spiTransfer(uint8_t b) {
return swSpiTransfer(b, SPI_speed, SCK_PIN, MISO_PIN, MOSI_PIN); return swSpiTransfer(b, SPI_speed, SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
} }
void spiBegin() { void spiBegin() {
swSpiBegin(SCK_PIN, MISO_PIN, MOSI_PIN); swSpiBegin(SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
} }
void spiInit(uint8_t spiRate) { void spiInit(uint8_t spiRate) {
SPI_speed = swSpiInit(spiRate, SCK_PIN, MOSI_PIN); SPI_speed = swSpiInit(spiRate, SD_SCK_PIN, SD_MOSI_PIN);
} }
uint8_t spiRec() { return spiTransfer(0xFF); } uint8_t spiRec() { return spiTransfer(0xFF); }
@ -100,14 +106,20 @@
#else #else
void spiBegin() { // setup SCK, MOSI & MISO pins for SSP0 #ifndef HAL_SPI_SPEED
spiInit(SPI_SPEED); #ifdef SD_SPI_SPEED
} #define HAL_SPI_SPEED SD_SPI_SPEED
#else
#define HAL_SPI_SPEED SPI_FULL_SPEED
#endif
#endif
void spiBegin() { spiInit(HAL_SPI_SPEED); } // Set up SCK, MOSI & MISO pins for SSP0
void spiInit(uint8_t spiRate) { void spiInit(uint8_t spiRate) {
#if MISO_PIN == BOARD_SPI1_MISO_PIN #if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
SPI.setModule(1); SPI.setModule(1);
#elif MISO_PIN == BOARD_SPI2_MISO_PIN #elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
SPI.setModule(2); SPI.setModule(2);
#endif #endif
SPI.setDataSize(DATA_SIZE_8BIT); SPI.setDataSize(DATA_SIZE_8BIT);
@ -150,10 +162,9 @@
(void)spiTransfer(buf[i]); (void)spiTransfer(buf[i]);
} }
/** Begin SPI transaction, set clock, bit order, data mode */ // Begin SPI transaction, set clock, bit order, data mode
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
// TODO: to be implemented // TODO: Implement this method
} }
#endif // LPC_SOFTWARE_SPI #endif // LPC_SOFTWARE_SPI
@ -392,9 +403,9 @@ void SPIClass::updateSettings() {
SSP_Init(_currentSetting->spi_d, &HW_SPI_init); // puts the values into the proper bits in the SSP0 registers SSP_Init(_currentSetting->spi_d, &HW_SPI_init); // puts the values into the proper bits in the SSP0 registers
} }
#if MISO_PIN == BOARD_SPI1_MISO_PIN #if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
SPIClass SPI(1); SPIClass SPI(1);
#elif MISO_PIN == BOARD_SPI2_MISO_PIN #elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
SPIClass SPI(2); SPIClass SPI(2);
#endif #endif

8
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View file

@ -116,8 +116,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#elif HAS_WIRED_LCD #elif HAS_WIRED_LCD
#if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1) #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
#error "Serial port pins (1) conflict with Encoder Buttons!" #error "Serial port pins (1) conflict with Encoder Buttons!"
#elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \ #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \
|| ANY_RX(1, LCD_SDSS, LCD_PINS_RS, MISO_PIN, DOGLCD_A0, SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN) || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
#error "Serial port pins (1) conflict with LCD pins!" #error "Serial port pins (1) conflict with LCD pins!"
#endif #endif
#endif #endif
@ -205,8 +205,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#error "SDA0 overlaps with BEEPER_PIN!" #error "SDA0 overlaps with BEEPER_PIN!"
#elif IS_SCL0(BTN_ENC) #elif IS_SCL0(BTN_ENC)
#error "SCL0 overlaps with Encoder Button!" #error "SCL0 overlaps with Encoder Button!"
#elif IS_SCL0(SS_PIN) #elif IS_SCL0(SD_SS_PIN)
#error "SCL0 overlaps with SS_PIN!" #error "SCL0 overlaps with SD_SS_PIN!"
#elif IS_SCL0(LCD_SDSS) #elif IS_SCL0(LCD_SDSS)
#error "SCL0 overlaps with LCD_SDSS!" #error "SCL0 overlaps with LCD_SDSS!"
#endif #endif

6
Marlin/src/HAL/LPC1768/main.cpp
View file

@ -90,11 +90,11 @@ void HAL_init() {
//debug_frmwrk_init(); //debug_frmwrk_init();
//_DBG("\n\nDebug running\n"); //_DBG("\n\nDebug running\n");
// Initialize the SD card chip select pins as soon as possible // Initialize the SD card chip select pins as soon as possible
#if PIN_EXISTS(SS) #if PIN_EXISTS(SD_SS)
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
#endif #endif
#if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SS_PIN #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SD_SS_PIN
OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH); OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH);
#endif #endif

28
Marlin/src/HAL/LPC1768/spi_pins.h
View file

@ -23,7 +23,7 @@
#include "../../core/macros.h" #include "../../core/macros.h"
#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) #if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
#define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
// needed due to the speed and mode required for communicating with each device being different. // needed due to the speed and mode required for communicating with each device being different.
// This requirement can be removed if the SPI access to these devices is updated to use // This requirement can be removed if the SPI access to these devices is updated to use
@ -31,24 +31,24 @@
#endif #endif
/** onboard SD card */ /** onboard SD card */
//#define SCK_PIN P0_07 //#define SD_SCK_PIN P0_07
//#define MISO_PIN P0_08 //#define SD_MISO_PIN P0_08
//#define MOSI_PIN P0_09 //#define SD_MOSI_PIN P0_09
//#define SS_PIN P0_06 //#define SD_SS_PIN P0_06
/** external */ /** external */
#ifndef SCK_PIN #ifndef SD_SCK_PIN
#define SCK_PIN P0_15 #define SD_SCK_PIN P0_15
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN P0_17 #define SD_MISO_PIN P0_17
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN P0_18 #define SD_MOSI_PIN P0_18
#endif #endif
#ifndef SS_PIN #ifndef SD_SS_PIN
#define SS_PIN P1_23 #define SD_SS_PIN P1_23
#endif #endif
#if !defined(SDSS) || SDSS == P_NC // gets defaulted in pins.h #if !defined(SDSS) || SDSS == P_NC // gets defaulted in pins.h
#undef SDSS #undef SDSS
#define SDSS SS_PIN #define SDSS SD_SS_PIN
#endif #endif

8
Marlin/src/HAL/LPC1768/tft/xpt2046.h
View file

@ -28,16 +28,16 @@
#endif #endif
#ifndef TOUCH_MISO_PIN #ifndef TOUCH_MISO_PIN
#define TOUCH_MISO_PIN MISO_PIN #define TOUCH_MISO_PIN SD_MISO_PIN
#endif #endif
#ifndef TOUCH_MOSI_PIN #ifndef TOUCH_MOSI_PIN
#define TOUCH_MOSI_PIN MOSI_PIN #define TOUCH_MOSI_PIN SD_MOSI_PIN
#endif #endif
#ifndef TOUCH_SCK_PIN #ifndef TOUCH_SCK_PIN
#define TOUCH_SCK_PIN SCK_PIN #define TOUCH_SCK_PIN SD_SCK_PIN
#endif #endif
#ifndef TOUCH_CS_PIN #ifndef TOUCH_CS_PIN
#define TOUCH_CS_PIN SS_PIN #define TOUCH_CS_PIN SD_SS_PIN
#endif #endif
#ifndef TOUCH_INT_PIN #ifndef TOUCH_INT_PIN
#define TOUCH_INT_PIN -1 #define TOUCH_INT_PIN -1

16
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp
View file

@ -62,10 +62,13 @@
#include <U8glib.h> #include <U8glib.h>
#include "../../shared/HAL_SPI.h" #include "../../shared/HAL_SPI.h"
void spiBegin(); #ifndef LCD_SPI_SPEED
void spiInit(uint8_t spiRate); #ifdef SD_SPI_SPEED
void spiSend(uint8_t b); #define LCD_SPI_SPEED SD_SPI_SPEED // Assume SPI speed shared with SD
void spiSend(const uint8_t* buf, size_t n); #else
#define LCD_SPI_SPEED SPI_FULL_SPEED // Use full speed if SD speed is not supplied
#endif
#endif
uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) { uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
switch (msg) { switch (msg) {
@ -81,10 +84,7 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
u8g_SetPIOutput(u8g, U8G_PI_RESET); u8g_SetPIOutput(u8g, U8G_PI_RESET);
u8g_Delay(5); u8g_Delay(5);
spiBegin(); spiBegin();
#ifndef SPI_SPEED spiInit(LCD_SPI_SPEED);
#define SPI_SPEED SPI_FULL_SPEED // use same SPI speed as SD card
#endif
spiInit(SPI_SPEED);
break; break;
case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */ case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */

16
Marlin/src/HAL/SAMD51/spi_pins.h
View file

@ -30,16 +30,16 @@
* SPI | 53 52 50 51 | * SPI | 53 52 50 51 |
* SPI1 | 83 81 80 82 | * SPI1 | 83 81 80 82 |
* +-------------------------+ * +-------------------------+
* Any pin can be used for Chip Select (SS_PIN) * Any pin can be used for Chip Select (SD_SS_PIN)
*/ */
#ifndef SCK_PIN #ifndef SD_SCK_PIN
#define SCK_PIN 52 #define SD_SCK_PIN 52
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN 50 #define SD_MISO_PIN 50
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN 51 #define SD_MOSI_PIN 51
#endif #endif
#ifndef SDSS #ifndef SDSS
#define SDSS 53 #define SDSS 53
@ -51,4 +51,4 @@
#endif #endif
#define SS_PIN SDSS #define SD_SS_PIN SDSS

26
Marlin/src/HAL/STM32/HAL_SPI.cpp
View file

@ -45,10 +45,10 @@ static SPISettings spiConfig;
#include "../shared/Delay.h" #include "../shared/Delay.h"
void spiBegin(void) { void spiBegin(void) {
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
OUT_WRITE(SCK_PIN, HIGH); OUT_WRITE(SD_SCK_PIN, HIGH);
SET_INPUT(MISO_PIN); SET_INPUT(SD_MISO_PIN);
OUT_WRITE(MOSI_PIN, HIGH); OUT_WRITE(SD_MOSI_PIN, HIGH);
} }
static uint16_t delay_STM32_soft_spi; static uint16_t delay_STM32_soft_spi;
@ -72,15 +72,15 @@ static SPISettings spiConfig;
uint8_t HAL_SPI_STM32_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3 uint8_t HAL_SPI_STM32_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
for (uint8_t bits = 8; bits--;) { for (uint8_t bits = 8; bits--;) {
WRITE(SCK_PIN, LOW); WRITE(SD_SCK_PIN, LOW);
WRITE(MOSI_PIN, b & 0x80); WRITE(SD_MOSI_PIN, b & 0x80);
DELAY_NS(delay_STM32_soft_spi); DELAY_NS(delay_STM32_soft_spi);
WRITE(SCK_PIN, HIGH); WRITE(SD_SCK_PIN, HIGH);
DELAY_NS(delay_STM32_soft_spi); DELAY_NS(delay_STM32_soft_spi);
b <<= 1; // little setup time b <<= 1; // little setup time
b |= (READ(MISO_PIN) != 0); b |= (READ(SD_MISO_PIN) != 0);
} }
DELAY_NS(125); DELAY_NS(125);
return b; return b;
@ -132,8 +132,8 @@ static SPISettings spiConfig;
* @details Only configures SS pin since stm32duino creates and initialize the SPI object * @details Only configures SS pin since stm32duino creates and initialize the SPI object
*/ */
void spiBegin() { void spiBegin() {
#if PIN_EXISTS(SS) #if PIN_EXISTS(SD_SS)
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
#endif #endif
} }
@ -154,9 +154,9 @@ static SPISettings spiConfig;
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0); spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
#if ENABLED(CUSTOM_SPI_PINS) #if ENABLED(CUSTOM_SPI_PINS)
SPI.setMISO(MISO_PIN); SPI.setMISO(SD_MISO_PIN);
SPI.setMOSI(MOSI_PIN); SPI.setMOSI(SD_MOSI_PIN);
SPI.setSCLK(SCK_PIN); SPI.setSCLK(SD_SCK_PIN);
#endif #endif
SPI.begin(); SPI.begin();

16
Marlin/src/HAL/STM32/spi_pins.h
View file

@ -21,15 +21,15 @@
/** /**
* Define SPI Pins: SCK, MISO, MOSI, SS * Define SPI Pins: SCK, MISO, MOSI, SS
*/ */
#ifndef SCK_PIN #ifndef SD_SCK_PIN
#define SCK_PIN PIN_SPI_SCK #define SD_SCK_PIN PIN_SPI_SCK
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN PIN_SPI_MISO #define SD_MISO_PIN PIN_SPI_MISO
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN PIN_SPI_MOSI #define SD_MOSI_PIN PIN_SPI_MOSI
#endif #endif
#ifndef SS_PIN #ifndef SD_SS_PIN
#define SS_PIN PIN_SPI_SS #define SD_SS_PIN PIN_SPI_SS
#endif #endif

4
Marlin/src/HAL/STM32F1/HAL_SPI.cpp
View file

@ -61,8 +61,8 @@
* @details Only configures SS pin since libmaple creates and initialize the SPI object * @details Only configures SS pin since libmaple creates and initialize the SPI object
*/ */
void spiBegin() { void spiBegin() {
#if PIN_EXISTS(SS) #if PIN_EXISTS(SD_SS)
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
#endif #endif
} }

20
Marlin/src/HAL/STM32F1/spi_pins.h
View file

@ -31,23 +31,23 @@
* SPI2 | PB12 PB13 PB14 PB15 | * SPI2 | PB12 PB13 PB14 PB15 |
* SPI3 | PA15 PB3 PB4 PB5 | * SPI3 | PA15 PB3 PB4 PB5 |
* +-----------------------------+ * +-----------------------------+
* Any pin can be used for Chip Select (SS_PIN) * Any pin can be used for Chip Select (SD_SS_PIN)
* SPI1 is enabled by default * SPI1 is enabled by default
*/ */
#ifndef SCK_PIN #ifndef SD_SCK_PIN
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#endif #endif
#ifndef MISO_PIN #ifndef SD_MISO_PIN
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#endif #endif
#ifndef MOSI_PIN #ifndef SD_MOSI_PIN
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#endif #endif
#ifndef SS_PIN #ifndef SD_SS_PIN
#define SS_PIN PA4 #define SD_SS_PIN PA4
#endif #endif
#undef SDSS #undef SDSS
#define SDSS SS_PIN #define SDSS SD_SS_PIN
#ifndef SPI_DEVICE #ifndef SPI_DEVICE
#define SPI_DEVICE 1 #define SPI_DEVICE 1

8
Marlin/src/HAL/STM32F1/tft/xpt2046.h
View file

@ -28,16 +28,16 @@
#endif #endif
#ifndef TOUCH_MISO_PIN #ifndef TOUCH_MISO_PIN
#define TOUCH_MISO_PIN MISO_PIN #define TOUCH_MISO_PIN SD_MISO_PIN
#endif #endif
#ifndef TOUCH_MOSI_PIN #ifndef TOUCH_MOSI_PIN
#define TOUCH_MOSI_PIN MOSI_PIN #define TOUCH_MOSI_PIN SD_MOSI_PIN
#endif #endif
#ifndef TOUCH_SCK_PIN #ifndef TOUCH_SCK_PIN
#define TOUCH_SCK_PIN SCK_PIN #define TOUCH_SCK_PIN SD_SCK_PIN
#endif #endif
#ifndef TOUCH_CS_PIN #ifndef TOUCH_CS_PIN
#define TOUCH_CS_PIN SS_PIN #define TOUCH_CS_PIN SD_SS_PIN
#endif #endif
#ifndef TOUCH_INT_PIN #ifndef TOUCH_INT_PIN
#define TOUCH_INT_PIN -1 #define TOUCH_INT_PIN -1

14
Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
View file

@ -35,18 +35,18 @@ static SPISettings spiConfig;
// Initialize SPI bus // Initialize SPI bus
void spiBegin() { void spiBegin() {
#if !PIN_EXISTS(SS) #if !PIN_EXISTS(SD_SS)
#error "SS_PIN not defined!" #error "SD_SS_PIN not defined!"
#endif #endif
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN); SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(MISO_PIN); SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(MOSI_PIN); SET_OUTPUT(SD_MOSI_PIN);
#if 0 && DISABLED(SOFTWARE_SPI) #if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device // set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH #if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH); WRITE(SD_SS_PIN, HIGH);
#endif #endif
// set a default rate // set a default rate
spiInit(SPI_HALF_SPEED); // 1 spiInit(SPI_HALF_SPEED); // 1

8
Marlin/src/HAL/TEENSY31_32/spi_pins.h
View file

@ -21,7 +21,7 @@
*/ */
#pragma once #pragma once
#define SCK_PIN 13 #define SD_SCK_PIN 13
#define MISO_PIN 12 #define SD_MISO_PIN 12
#define MOSI_PIN 11 #define SD_MOSI_PIN 11
#define SS_PIN 20 //SDSS // A.28, A.29, B.21, C.26, C.29 #define SD_SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29

14
Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
View file

@ -35,18 +35,18 @@
static SPISettings spiConfig; static SPISettings spiConfig;
void spiBegin() { void spiBegin() {
#if !PIN_EXISTS(SS) #if !PIN_EXISTS(SD_SS)
#error "SS_PIN not defined!" #error "SD_SS_PIN not defined!"
#endif #endif
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
SET_OUTPUT(SCK_PIN); SET_OUTPUT(SD_SCK_PIN);
SET_INPUT(MISO_PIN); SET_INPUT(SD_MISO_PIN);
SET_OUTPUT(MOSI_PIN); SET_OUTPUT(SD_MOSI_PIN);
#if 0 && DISABLED(SOFTWARE_SPI) #if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device // set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH #if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH); WRITE(SD_SS_PIN, HIGH);
#endif #endif
// set a default rate // set a default rate
spiInit(SPI_HALF_SPEED); // 1 spiInit(SPI_HALF_SPEED); // 1

8
Marlin/src/HAL/TEENSY35_36/spi_pins.h
View file

@ -25,7 +25,7 @@
* HAL SPI Pins for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) * HAL SPI Pins for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0)
*/ */
#define SCK_PIN 13 #define SD_SCK_PIN 13
#define MISO_PIN 12 #define SD_MISO_PIN 12
#define MOSI_PIN 11 #define SD_MOSI_PIN 11
#define SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29 #define SD_SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29

14
Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
View file

@ -50,20 +50,20 @@ static SPISettings spiConfig;
// ------------------------ // ------------------------
void spiBegin() { void spiBegin() {
#ifndef SS_PIN #ifndef SD_SS_PIN
#error "SS_PIN is not defined!" #error "SD_SS_PIN is not defined!"
#endif #endif
OUT_WRITE(SS_PIN, HIGH); OUT_WRITE(SD_SS_PIN, HIGH);
//SET_OUTPUT(SCK_PIN); //SET_OUTPUT(SD_SCK_PIN);
//SET_INPUT(MISO_PIN); //SET_INPUT(SD_MISO_PIN);
//SET_OUTPUT(MOSI_PIN); //SET_OUTPUT(SD_MOSI_PIN);
#if 0 && DISABLED(SOFTWARE_SPI) #if 0 && DISABLED(SOFTWARE_SPI)
// set SS high - may be chip select for another SPI device // set SS high - may be chip select for another SPI device
#if SET_SPI_SS_HIGH #if SET_SPI_SS_HIGH
WRITE(SS_PIN, HIGH); WRITE(SD_SS_PIN, HIGH);
#endif #endif
// set a default rate // set a default rate
spiInit(SPI_HALF_SPEED); // 1 spiInit(SPI_HALF_SPEED); // 1

8
Marlin/src/HAL/TEENSY40_41/spi_pins.h
View file

@ -25,7 +25,7 @@
* HAL SPI Pins for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) * HAL SPI Pins for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A)
*/ */
#define SCK_PIN 13 #define SD_SCK_PIN 13
#define MISO_PIN 12 #define SD_MISO_PIN 12
#define MOSI_PIN 11 #define SD_MOSI_PIN 11
#define SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29 #define SD_SS_PIN 20 // SDSS // A.28, A.29, B.21, C.26, C.29

2
Marlin/src/feature/dac/dac_dac084s085.cpp
View file

@ -92,7 +92,7 @@ void dac084s085::cshigh() {
WRITE(SPI_EEPROM1_CS, HIGH); WRITE(SPI_EEPROM1_CS, HIGH);
WRITE(SPI_EEPROM2_CS, HIGH); WRITE(SPI_EEPROM2_CS, HIGH);
WRITE(SPI_FLASH_CS, HIGH); WRITE(SPI_FLASH_CS, HIGH);
WRITE(SS_PIN, HIGH); WRITE(SD_SS_PIN, HIGH);
} }
#endif // MB(ALLIGATOR) #endif // MB(ALLIGATOR)

6
Marlin/src/inc/Conditionals_LCD.h
View file

@ -1045,9 +1045,9 @@
#define INVERT_E_DIR false #define INVERT_E_DIR false
#endif #endif
// Fallback SPI Speed // Fallback SPI Speed for SD
#ifndef SPI_SPEED #if ENABLED(SDSUPPORT) && !defined(SD_SPI_SPEED)
#define SPI_SPEED SPI_FULL_SPEED #define SD_SPI_SPEED SPI_FULL_SPEED
#endif #endif
/** /**

6
Marlin/src/inc/Conditionals_post.h
View file

@ -2590,10 +2590,10 @@
*/ */
#if HAS_MARLINUI_U8GLIB #if HAS_MARLINUI_U8GLIB
#ifndef DOGLCD_SCK #ifndef DOGLCD_SCK
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SD_SCK_PIN
#endif #endif
#ifndef DOGLCD_MOSI #ifndef DOGLCD_MOSI
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI SD_MOSI_PIN
#endif #endif
#endif #endif
@ -2683,7 +2683,7 @@
// Force SDCARD_SORT_ALPHA to be enabled for Graphical LCD on LPC1768 // Force SDCARD_SORT_ALPHA to be enabled for Graphical LCD on LPC1768
// on boards where SD card and LCD display share the same SPI bus // on boards where SD card and LCD display share the same SPI bus
// because of a bug in the shared SPI implementation. (See #8122) // because of a bug in the shared SPI implementation. (See #8122)
#if defined(TARGET_LPC1768) && IS_RRD_FG_SC && (SCK_PIN == LCD_PINS_D4) #if defined(TARGET_LPC1768) && IS_RRD_FG_SC && (SD_SCK_PIN == LCD_PINS_D4)
#define SDCARD_SORT_ALPHA // Keep one directory level in RAM. Changing directory levels #define SDCARD_SORT_ALPHA // Keep one directory level in RAM. Changing directory levels
// may still glitch the screen, but LCD updates clean it up. // may still glitch the screen, but LCD updates clean it up.
#undef SDSORT_LIMIT #undef SDSORT_LIMIT

4
Marlin/src/inc/SanityCheck.h
View file

@ -105,9 +105,9 @@
#elif defined(USE_AUTOMATIC_VERSIONING) #elif defined(USE_AUTOMATIC_VERSIONING)
#error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE." #error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE."
#elif defined(SDSLOW) #elif defined(SDSLOW)
#error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead." #error "SDSLOW deprecated. Set SD_SPI_SPEED to SPI_HALF_SPEED instead."
#elif defined(SDEXTRASLOW) #elif defined(SDEXTRASLOW)
#error "SDEXTRASLOW deprecated. Set SPI_SPEED to SPI_QUARTER_SPEED instead." #error "SDEXTRASLOW deprecated. Set SD_SPI_SPEED to SPI_QUARTER_SPEED instead."
#elif defined(FILAMENT_SENSOR) #elif defined(FILAMENT_SENSOR)
#error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR." #error "FILAMENT_SENSOR is now FILAMENT_WIDTH_SENSOR."
#elif defined(ENDSTOPPULLUP_FIL_RUNOUT) #elif defined(ENDSTOPPULLUP_FIL_RUNOUT)

6
Marlin/src/lcd/dogm/marlinui_DOGM.h
View file

@ -37,7 +37,7 @@
// RepRapWorld Graphical LCD // RepRapWorld Graphical LCD
#define U8G_CLASS U8GLIB_ST7920_128X64_4X #define U8G_CLASS U8GLIB_ST7920_128X64_4X
#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN) #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_ENABLE == SD_MOSI_PIN)
#define U8G_PARAM LCD_PINS_RS #define U8G_PARAM LCD_PINS_RS
#else #else
#define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS #define U8G_PARAM LCD_PINS_D4, LCD_PINS_ENABLE, LCD_PINS_RS
@ -48,7 +48,7 @@
// RepRap Discount Full Graphics Smart Controller // RepRap Discount Full Graphics Smart Controller
// and other variant LCDs using ST7920 // and other variant LCDs using ST7920
#if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN) && (LCD_PINS_ENABLE == MOSI_PIN) #if DISABLED(SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN) && (LCD_PINS_ENABLE == SD_MOSI_PIN)
#define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL // 2 stripes, HW SPI (Shared with SD card. Non-standard LCD adapter on AVR.) #define U8G_CLASS U8GLIB_ST7920_128X64_4X_HAL // 2 stripes, HW SPI (Shared with SD card. Non-standard LCD adapter on AVR.)
#define U8G_PARAM LCD_PINS_RS #define U8G_PARAM LCD_PINS_RS
#else #else
@ -88,7 +88,7 @@
#define SMART_RAMPS MB(RAMPS_SMART_EFB, RAMPS_SMART_EEB, RAMPS_SMART_EFF, RAMPS_SMART_EEF, RAMPS_SMART_SF) #define SMART_RAMPS MB(RAMPS_SMART_EFB, RAMPS_SMART_EEB, RAMPS_SMART_EFF, RAMPS_SMART_EEF, RAMPS_SMART_SF)
#define U8G_CLASS U8GLIB_64128N_2X_HAL // 4 stripes (HW-SPI) #define U8G_CLASS U8GLIB_64128N_2X_HAL // 4 stripes (HW-SPI)
#if SMART_RAMPS || DOGLCD_SCK != SCK_PIN || DOGLCD_MOSI != MOSI_PIN #if SMART_RAMPS || DOGLCD_SCK != SD_SCK_PIN || DOGLCD_MOSI != SD_MOSI_PIN
#define FORCE_SOFT_SPI // SW-SPI #define FORCE_SOFT_SPI // SW-SPI
#endif #endif

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/media_file_reader.cpp
View file

@ -27,7 +27,7 @@
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
bool MediaFileReader::open(const char* filename) { bool MediaFileReader::open(const char* filename) {
card.init(SPI_SPEED, SDSS); card.init(SD_SPI_SPEED, SDSS);
volume.init(&card); volume.init(&card);
root.openRoot(&volume); root.openRoot(&volume);
return file.open(&root, filename, O_READ); return file.open(&root, filename, O_READ);

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/spi.cpp
View file

@ -33,7 +33,7 @@ namespace FTDI {
SPIClass EVE_SPI(CLCD_SPI_BUS); SPIClass EVE_SPI(CLCD_SPI_BUS);
#endif #endif
#ifndef CLCD_HW_SPI_SPEED #ifndef CLCD_HW_SPI_SPEED
#define CLCD_HW_SPI_SPEED 8000000 >> SPI_SPEED #define CLCD_HW_SPI_SPEED 8000000 >> SD_SPI_SPEED
#endif #endif
SPISettings SPI::spi_settings(CLCD_HW_SPI_SPEED, MSBFIRST, SPI_MODE0); SPISettings SPI::spi_settings(CLCD_HW_SPI_SPEED, MSBFIRST, SPI_MODE0);
#endif #endif

2
Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/media_player_screen.cpp
View file

@ -151,7 +151,7 @@ void MediaPlayerScreen::playStream(void *obj, media_streamer_func_t *data_stream
SERIAL_ECHO_MSG("Done playing video"); SERIAL_ECHO_MSG("Done playing video");
exit: exit:
spiInit(SPI_SPEED); // Restore default speed spiInit(SD_SPI_SPEED); // Restore default speed
// Since playing media overwrites RAMG, we need to reinitialize // Since playing media overwrites RAMG, we need to reinitialize
// everything that is stored in RAMG. // everything that is stored in RAMG.

8
Marlin/src/libs/private_spi.h
View file

@ -35,12 +35,12 @@ class SPIclass {
// Hardware SPI // Hardware SPI
template<> template<>
class SPIclass<MISO_PIN, MOSI_PIN, SCK_PIN> { class SPIclass<SD_MISO_PIN, SD_MOSI_PIN, SD_SCK_PIN> {
public: public:
FORCE_INLINE static void init() { FORCE_INLINE static void init() {
OUT_WRITE(SCK_PIN, LOW); OUT_WRITE(SD_SCK_PIN, LOW);
OUT_WRITE(MOSI_PIN, HIGH); OUT_WRITE(SD_MOSI_PIN, HIGH);
SET_INPUT_PULLUP(MISO_PIN); SET_INPUT_PULLUP(SD_MISO_PIN);
} }
FORCE_INLINE static uint8_t receive() { FORCE_INLINE static uint8_t receive() {
#if defined(__AVR__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__) || defined(__IMXRT1062__) #if defined(__AVR__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__) || defined(__IMXRT1062__)

4
Marlin/src/module/temperature.cpp
View file

@ -53,7 +53,7 @@
#define MAX31865_CS2_PIN MAX6675_SS2_PIN #define MAX31865_CS2_PIN MAX6675_SS2_PIN
#endif #endif
#ifndef MAX31865_MOSI_PIN #ifndef MAX31865_MOSI_PIN
#define MAX31865_MOSI_PIN MOSI_PIN #define MAX31865_MOSI_PIN SD_MOSI_PIN
#endif #endif
#ifndef MAX31865_MISO_PIN #ifndef MAX31865_MISO_PIN
#define MAX31865_MISO_PIN MAX6675_DO_PIN #define MAX31865_MISO_PIN MAX6675_DO_PIN
@ -1662,7 +1662,7 @@ void Temperature::updateTemperaturesFromRawValues() {
#if MAX6675_SEPARATE_SPI #if MAX6675_SEPARATE_SPI
template<uint8_t MisoPin, uint8_t MosiPin, uint8_t SckPin> SoftSPI<MisoPin, MosiPin, SckPin> SPIclass<MisoPin, MosiPin, SckPin>::softSPI; template<uint8_t MisoPin, uint8_t MosiPin, uint8_t SckPin> SoftSPI<MisoPin, MosiPin, SckPin> SPIclass<MisoPin, MosiPin, SckPin>::softSPI;
SPIclass<MAX6675_DO_PIN, MOSI_PIN, MAX6675_SCK_PIN> max6675_spi; SPIclass<MAX6675_DO_PIN, SD_MOSI_PIN, MAX6675_SCK_PIN> max6675_spi;
#endif #endif
// Init fans according to whether they're native PWM or Software PWM // Init fans according to whether they're native PWM or Software PWM

6
Marlin/src/pins/esp32/pins_E4D.h
View file

@ -100,8 +100,8 @@
// //
// MicroSD card on SPI // MicroSD card on SPI
// //
#define MOSI_PIN 23 #define SD_MOSI_PIN 23
#define MISO_PIN 19 #define SD_MISO_PIN 19
#define SCK_PIN 18 #define SD_SCK_PIN 18
#define SDSS 5 #define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers #define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers

6
Marlin/src/pins/esp32/pins_FYSETC_E4.h
View file

@ -104,9 +104,9 @@
// //
// MicroSD card // MicroSD card
// //
#define MOSI_PIN 23 #define SD_MOSI_PIN 23
#define MISO_PIN 19 #define SD_MISO_PIN 19
#define SCK_PIN 18 #define SD_SCK_PIN 18
#define SDSS 5 #define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers #define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers

6
Marlin/src/pins/esp32/pins_MRR_ESPA.h
View file

@ -93,9 +93,9 @@
// //
// MicroSD card // MicroSD card
// //
#define MOSI_PIN 23 #define SD_MOSI_PIN 23
#define MISO_PIN 19 #define SD_MISO_PIN 19
#define SCK_PIN 18 #define SD_SCK_PIN 18
#define SDSS 5 #define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers #define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers

6
Marlin/src/pins/esp32/pins_MRR_ESPE.h
View file

@ -112,9 +112,9 @@
// //
// MicroSD card // MicroSD card
// //
#define MOSI_PIN 23 #define SD_MOSI_PIN 23
#define MISO_PIN 19 #define SD_MISO_PIN 19
#define SCK_PIN 18 #define SD_SCK_PIN 18
#define SDSS 5 #define SDSS 5
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers #define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers

16
Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h
View file

@ -102,16 +102,16 @@
#endif #endif
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SD_SCK_PIN P0_15
#define MISO_PIN P0_17 #define SD_MISO_PIN P0_17
#define MOSI_PIN P0_18 #define SD_MOSI_PIN P0_18
#define SS_PIN LCD_SDSS #define SD_SS_PIN LCD_SDSS
#define SD_DETECT_PIN P3_25 #define SD_DETECT_PIN P3_25
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."
#endif #endif

10
Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h
View file

@ -155,11 +155,11 @@
* Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board. * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board.
*/ */
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define SCK_PIN P0_15 // EXP1-5 #define SD_SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4 #define SD_MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3 #define SD_MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2 #define SD_SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN #define SDSS SD_SS_PIN
#endif #endif
/** /**

10
Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h
View file

@ -127,11 +127,11 @@
*/ */
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define SCK_PIN P0_15 // EXP1-5 #define SD_SCK_PIN P0_15 // EXP1-5
#define MISO_PIN P0_16 // EXP1-4 #define SD_MISO_PIN P0_16 // EXP1-4
#define MOSI_PIN P0_18 // EXP1-3 #define SD_MOSI_PIN P0_18 // EXP1-3
#define SS_PIN P1_30 // EXP1-2 #define SD_SS_PIN P1_30 // EXP1-2
#define SDSS SS_PIN #define SDSS SD_SS_PIN
#endif // SDSUPPORT #endif // SDSUPPORT

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h
View file

@ -107,7 +107,7 @@
#endif #endif
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SS_PIN P1_23 #define SD_SS_PIN P1_23
#endif #endif
// Trinamic driver support // Trinamic driver support

2
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View file

@ -375,7 +375,7 @@
#endif #endif
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SS_PIN EXPA2_07_PIN #define SD_SS_PIN EXPA2_07_PIN
#endif #endif
/** /**

8
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View file

@ -244,7 +244,7 @@
// SD Connection // SD Connection
// //
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SS_PIN EXPA2_07_PIN #define SD_SS_PIN EXPA2_07_PIN
#endif #endif
/** /**
@ -374,9 +374,9 @@
#define TOUCH_BUTTONS_HW_SPI_DEVICE 1 #define TOUCH_BUTTONS_HW_SPI_DEVICE 1
// SPI 1 // SPI 1
#define SCK_PIN EXPA2_09_PIN #define SD_SCK_PIN EXPA2_09_PIN
#define MISO_PIN EXPA2_10_PIN #define SD_MISO_PIN EXPA2_10_PIN
#define MOSI_PIN EXPA2_05_PIN #define SD_MOSI_PIN EXPA2_05_PIN
// Disable any LCD related PINs config // Disable any LCD related PINs config
#define LCD_PINS_ENABLE -1 #define LCD_PINS_ENABLE -1

14
Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h
View file

@ -114,16 +114,16 @@
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SD_SCK_PIN P0_15
#define MISO_PIN P0_17 #define SD_MISO_PIN P0_17
#define MOSI_PIN P0_18 #define SD_MOSI_PIN P0_18
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."
#endif #endif

16
Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h
View file

@ -154,15 +154,15 @@
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SD_SCK_PIN P0_15
#define MISO_PIN P0_17 #define SD_MISO_PIN P0_17
#define MOSI_PIN P0_18 #define SD_MOSI_PIN P0_18
#define SS_PIN P0_16 #define SD_SS_PIN P0_16
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#endif #endif

35
Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
View file

@ -182,26 +182,25 @@
* SD_DETECT_PIN entirely and remove that wire from the the custom cable. * SD_DETECT_PIN entirely and remove that wire from the the custom cable.
*/ */
#define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27) #define SD_DETECT_PIN P2_11 // J8-5 (moved from EXP2 P0.27)
#define SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7) #define SD_SCK_PIN P1_22 // J8-2 (moved from EXP2 P0.7)
#define MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8) #define SD_MISO_PIN P1_23 // J8-3 (moved from EXP2 P0.8)
#define MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9) #define SD_MOSI_PIN P2_12 // J8-4 (moved from EXP2 P0.9)
#define SS_PIN P0_28 #define SD_SS_PIN P0_28
#define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the #define LPC_SOFTWARE_SPI // With a custom cable we need software SPI because the
// selected pins are not on a hardware SPI controller // selected pins are not on a hardware SPI controller
#elif SD_CONNECTION_IS(LCD) #elif SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
// use standard cable and header, SPI and SD detect sre shared with on-board SD card #define SD_SCK_PIN P0_07
// hardware SPI is used for both SD cards. The detect pin is shred between the #define SD_MISO_PIN P0_08
#define SD_MOSI_PIN P0_09
#if SD_CONNECTION_IS(LCD)
// Use standard cable and header, SPI and SD detect are shared with onboard SD card.
// Hardware SPI is used for both SD cards. The detect pin is shared between the
// LCD and onboard SD readers so we disable it. // LCD and onboard SD readers so we disable it.
#define SCK_PIN P0_07 #define SD_SS_PIN P0_28
#define MISO_PIN P0_08 #else
#define MOSI_PIN P0_09
#define SS_PIN P0_28
#elif SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07 #define SD_SS_PIN ONBOARD_SD_CS_PIN
#define MISO_PIN P0_08 #endif
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#endif #endif
/** /**
@ -238,8 +237,8 @@
#define LCD_PINS_ENABLE P0_18 // EXP1.3 #define LCD_PINS_ENABLE P0_18 // EXP1.3
#define LCD_PINS_D4 P0_15 // EXP1.5 #define LCD_PINS_D4 P0_15 // EXP1.5
#if ANY(VIKI2, miniVIKI) #if ANY(VIKI2, miniVIKI)
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SD_SCK_PIN
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI SD_MOSI_PIN
#endif #endif
#if ENABLED(FYSETC_MINI_12864) #if ENABLED(FYSETC_MINI_12864)

10
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View file

@ -375,13 +375,13 @@
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#if SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(ONBOARD)
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#else #else
#define SS_PIN P0_28 #define SD_SS_PIN P0_28
#endif #endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."

25
Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h
View file

@ -336,11 +336,6 @@
#elif HAS_WIRED_LCD #elif HAS_WIRED_LCD
//#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
//#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
//#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
//#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS)
#if ENABLED(FYSETC_MINI_12864) #if ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN P1_01 #define BEEPER_PIN P1_01
#define BTN_ENC P1_04 #define BTN_ENC P1_04
@ -375,8 +370,8 @@
#define DOGLCD_CS P0_16 // (16) #define DOGLCD_CS P0_16 // (16)
#define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2 #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SD_SCK_PIN
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI SD_MOSI_PIN
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
@ -464,16 +459,16 @@
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 #define SD_SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 #define SD_MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3 #define SD_MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin #define SD_SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."
#endif #endif

20
Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h
View file

@ -162,8 +162,8 @@
#define BEEPER_PIN P1_30 // (37) may change if cable changes #define BEEPER_PIN P1_30 // (37) may change if cable changes
#define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2 #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
#define DOGLCD_SCK SCK_PIN #define DOGLCD_SCK SD_SCK_PIN
#define DOGLCD_MOSI MOSI_PIN #define DOGLCD_MOSI SD_MOSI_PIN
#define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
#define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
@ -204,16 +204,16 @@
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SD_SCK_PIN P0_15
#define MISO_PIN P0_17 #define SD_MISO_PIN P0_17
#define MOSI_PIN P0_18 #define SD_MOSI_PIN P0_18
#define SS_PIN P1_23 #define SD_SS_PIN P1_23
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."
#endif #endif

8
Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h
View file

@ -253,10 +253,10 @@
#if SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P2_00 #define SD_DETECT_PIN P2_00
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SS_PIN P0_06 #define SD_SS_PIN P0_06
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR E3 Turbo." #error "SD CUSTOM_CABLE is not compatible with SKR E3 Turbo."
#endif #endif

17
Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h
View file

@ -233,17 +233,16 @@
#define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN P0_06 // Chip select for "System" SD card
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3
#define SD_MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3
#define SD_MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_07 // (52) system defined J3-9 & AUX-3 #define SD_SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#define MISO_PIN P0_08 // (50) system defined J3-10 & AUX-3 #else
#define MOSI_PIN P0_09 // (51) system defined J3-10 & AUX-3
#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 (Sometimes called SDSS) - CS used by Marlin
#elif SD_CONNECTION_IS(ONBOARD)
#undef SD_DETECT_PIN #undef SD_DETECT_PIN
#define SCK_PIN P0_07 #define SD_SS_PIN ONBOARD_SD_CS_PIN
#define MISO_PIN P0_08 #endif
#define MOSI_PIN P0_09
#define SS_PIN ONBOARD_SD_CS_PIN
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."
#endif #endif

16
Marlin/src/pins/lpc1769/pins_FLY_CDY.h
View file

@ -167,15 +167,15 @@
#endif #endif
#if SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(ONBOARD)
#define SS_PIN P0_06 #define SD_SS_PIN P0_06
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define SD_DETECT_PIN P0_05 #define SD_DETECT_PIN P0_05
#elif SD_CONNECTION_IS(LCD) #elif SD_CONNECTION_IS(LCD)
#define SCK_PIN P0_15 #define SD_SCK_PIN P0_15
#define MISO_PIN P0_17 #define SD_MISO_PIN P0_17
#define MOSI_PIN P0_18 #define SD_MOSI_PIN P0_18
#define SS_PIN P0_16 #define SD_SS_PIN P0_16
#define SD_DETECT_PIN P2_06 #define SD_DETECT_PIN P2_06
#endif #endif

10
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
View file

@ -394,13 +394,13 @@
#if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN P0_27 #define SD_DETECT_PIN P0_27
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#if SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(ONBOARD)
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
#else #else
#define SS_PIN P0_28 #define SD_SS_PIN P0_28
#endif #endif
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board." #error "No custom SD drive cable defined for this board."

8
Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h
View file

@ -124,10 +124,10 @@
*/ */
#define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET) #define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET)
#define MISO_PIN P0_08 // EXP2 Pin 1 (PB3, SD_MISO) #define SD_MISO_PIN P0_08 // EXP2 Pin 1 (PB3, SD_MISO)
#define SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK) #define SD_SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK)
#define SS_PIN P0_28 // EXP2 Pin 4 (SD_CSEL, SD_CS) #define SD_SS_PIN P0_28 // EXP2 Pin 4 (SD_CSEL, SD_CS)
#define MOSI_PIN P0_09 // EXP2 Pin 6 (PB2, SD_MOSI) #define SD_MOSI_PIN P0_09 // EXP2 Pin 6 (PB2, SD_MOSI)
/** /**
* The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either * The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either

8
Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h
View file

@ -141,11 +141,11 @@
#define SDCARD_CONNECTION ONBOARD #define SDCARD_CONNECTION ONBOARD
#define SCK_PIN P0_07 #define SD_SCK_PIN P0_07
#define MISO_PIN P0_08 #define SD_MISO_PIN P0_08
#define MOSI_PIN P0_09 #define SD_MOSI_PIN P0_09
#define ONBOARD_SD_CS_PIN P0_06 #define ONBOARD_SD_CS_PIN P0_06
#define SS_PIN ONBOARD_SD_CS_PIN #define SD_SS_PIN ONBOARD_SD_CS_PIN
// //
// LCD / Controller // LCD / Controller

8
Marlin/src/pins/pinsDebug_list.h
View file

@ -702,7 +702,7 @@
// REPORT_NAME_DIGITAL(__LINE__, MISO) // REPORT_NAME_DIGITAL(__LINE__, MISO)
// #endif // #endif
#if PIN_EXISTS(MISO) #if PIN_EXISTS(MISO)
REPORT_NAME_DIGITAL(__LINE__, MISO_PIN) REPORT_NAME_DIGITAL(__LINE__, SD_MISO_PIN)
#endif #endif
#if PIN_EXISTS(MOSFET_A) #if PIN_EXISTS(MOSFET_A)
REPORT_NAME_DIGITAL(__LINE__, MOSFET_A_PIN) REPORT_NAME_DIGITAL(__LINE__, MOSFET_A_PIN)
@ -720,7 +720,7 @@
// REPORT_NAME_DIGITAL(__LINE__, MOSI) // REPORT_NAME_DIGITAL(__LINE__, MOSI)
// #endif // #endif
#if PIN_EXISTS(MOSI) #if PIN_EXISTS(MOSI)
REPORT_NAME_DIGITAL(__LINE__, MOSI_PIN) REPORT_NAME_DIGITAL(__LINE__, SD_MOSI_PIN)
#endif #endif
#if PIN_EXISTS(MOTOR_CURRENT_PWM_E) #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_E_PIN) REPORT_NAME_DIGITAL(__LINE__, MOTOR_CURRENT_PWM_E_PIN)
@ -801,7 +801,7 @@
// REPORT_NAME_DIGITAL(__LINE__, SCK) // REPORT_NAME_DIGITAL(__LINE__, SCK)
// #endif // #endif
#if PIN_EXISTS(SCK) #if PIN_EXISTS(SCK)
REPORT_NAME_DIGITAL(__LINE__, SCK_PIN) REPORT_NAME_DIGITAL(__LINE__, SD_SCK_PIN)
#endif #endif
// #if defined(SCL) && SCL >= 0 // #if defined(SCL) && SCL >= 0
// REPORT_NAME_DIGITAL(__LINE__, SCL) // REPORT_NAME_DIGITAL(__LINE__, SCL)
@ -909,7 +909,7 @@
REPORT_NAME_DIGITAL(__LINE__, SR_STROBE_PIN) REPORT_NAME_DIGITAL(__LINE__, SR_STROBE_PIN)
#endif #endif
#if PIN_EXISTS(SS) #if PIN_EXISTS(SS)
REPORT_NAME_DIGITAL(__LINE__, SS_PIN) REPORT_NAME_DIGITAL(__LINE__, SD_SS_PIN)
#endif #endif
#if PIN_EXISTS(STAT_LED_BLUE) #if PIN_EXISTS(STAT_LED_BLUE)
REPORT_NAME_DIGITAL(__LINE__, STAT_LED_BLUE_PIN) REPORT_NAME_DIGITAL(__LINE__, STAT_LED_BLUE_PIN)

6
Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h
View file

@ -80,9 +80,9 @@
#define SDSS 53 // PB0 / SS #define SDSS 53 // PB0 / SS
#define LED_PIN 13 // PB7 / PWM13 #define LED_PIN 13 // PB7 / PWM13
#define MISO_PIN 50 // PB3 #define SD_MISO_PIN 50 // PB3
#define MOSI_PIN 51 // PB2 #define SD_MOSI_PIN 51 // PB2
#define SCK_PIN 52 // PB1 #define SD_SCK_PIN 52 // PB1
// //
// LCDs and Controllers // LCDs and Controllers

6
Marlin/src/pins/sam/pins_ARCHIM1.h
View file

@ -170,9 +170,9 @@
#define INT_SDSS 55 // D55 PA24/MCDA3 #define INT_SDSS 55 // D55 PA24/MCDA3
// External SD card reader on SC2 // External SD card reader on SC2
#define SCK_PIN 76 // D76 PA27 #define SD_SCK_PIN 76 // D76 PA27
#define MISO_PIN 74 // D74 PA25 #define SD_MISO_PIN 74 // D74 PA25
#define MOSI_PIN 75 // D75 PA26 #define SD_MOSI_PIN 75 // D75 PA26
#define SDSS 87 // D87 PA29 #define SDSS 87 // D87 PA29
// 2MB SPI Flash // 2MB SPI Flash

6
Marlin/src/pins/sam/pins_ARCHIM2.h
View file

@ -192,9 +192,9 @@
#define INT_SDSS 55 // D55 PA24/MCDA3 #define INT_SDSS 55 // D55 PA24/MCDA3
// External SD card reader on SC2 // External SD card reader on SC2
#define SCK_PIN 76 // D76 PA27 #define SD_SCK_PIN 76 // D76 PA27
#define MISO_PIN 74 // D74 PA25 #define SD_MISO_PIN 74 // D74 PA25
#define MOSI_PIN 75 // D75 PA26 #define SD_MOSI_PIN 75 // D75 PA26
#define SDSS 87 // D87 PA29 #define SDSS 87 // D87 PA29
// Unused Digital GPIO J20 Pins // Unused Digital GPIO J20 Pins

6
Marlin/src/pins/sam/pins_CNCONTROLS_15D.h
View file

@ -117,9 +117,9 @@
// //
// SD card // SD card
// //
#define SCK_PIN 76 #define SD_SCK_PIN 76
#define MISO_PIN 74 #define SD_MISO_PIN 74
#define MOSI_PIN 75 #define SD_MOSI_PIN 75
#define SDSS 53 #define SDSS 53
#define SD_DETECT_PIN 40 #define SD_DETECT_PIN 40

6
Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h
View file

@ -151,9 +151,9 @@
///////////////////////////////////////////////////////// /////////////////////////////////////////////////////////
#define MISO_PIN 68 // set to unused pins for now #define SD_MISO_PIN 68 // set to unused pins for now
#define MOSI_PIN 69 // set to unused pins for now #define SD_MOSI_PIN 69 // set to unused pins for now
#define SCK_PIN 70 // set to unused pins for now #define SD_SCK_PIN 70 // set to unused pins for now
#define SDSS 71 // set to unused pins for now #define SDSS 71 // set to unused pins for now
/** /**

6
Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h
View file

@ -147,9 +147,9 @@
#define SPI_EEPROM2_CS -1 #define SPI_EEPROM2_CS -1
#define SPI_FLASH_CS -1 #define SPI_FLASH_CS -1
#define SCK_PIN 76 #define SD_SCK_PIN 76
#define MISO_PIN 74 #define SD_MISO_PIN 74
#define MOSI_PIN 75 #define SD_MOSI_PIN 75
// SPI for Max6675 or Max31855 Thermocouple // SPI for Max6675 or Max31855 Thermocouple
#define MAX6675_SS_PIN 65 #define MAX6675_SS_PIN 65

8
Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h
View file

@ -91,13 +91,13 @@
PIN: 3 Port: B3 Z_STEP_PIN protected PIN: 3 Port: B3 Z_STEP_PIN protected
PIN: 4 Port: B4 AVR_SS_PIN protected PIN: 4 Port: B4 AVR_SS_PIN protected
. FAN_PIN protected . FAN_PIN protected
. SS_PIN protected . SD_SS_PIN protected
PIN: 5 Port: B5 AVR_MOSI_PIN Output = 1 PIN: 5 Port: B5 AVR_MOSI_PIN Output = 1
. MOSI_PIN Output = 1 . SD_MOSI_PIN Output = 1
PIN: 6 Port: B6 AVR_MISO_PIN Input = 0 TIMER3A PWM: 0 WGM: 1 COM3A: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0 PIN: 6 Port: B6 AVR_MISO_PIN Input = 0 TIMER3A PWM: 0 WGM: 1 COM3A: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0
. MISO_PIN Input = 0 . SD_MISO_PIN Input = 0
PIN: 7 Port: B7 AVR_SCK_PIN Output = 0 TIMER3B PWM: 0 WGM: 1 COM3B: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0 PIN: 7 Port: B7 AVR_SCK_PIN Output = 0 TIMER3B PWM: 0 WGM: 1 COM3B: 0 CS: 3 TCCR3A: 1 TCCR3B: 3 TIMSK3: 0
. SCK_PIN Output = 0 . SD_SCK_PIN Output = 0
PIN: 8 Port: D0 RXD Input = 1 PIN: 8 Port: D0 RXD Input = 1
PIN: 9 Port: D1 TXD Input = 0 PIN: 9 Port: D1 TXD Input = 0
PIN: 10 Port: D2 BTN_EN2 Input = 1 PIN: 10 Port: D2 BTN_EN2 Input = 1

6
Marlin/src/pins/sanguino/pins_ZMIB_V2.h
View file

@ -49,11 +49,11 @@
* PIN: 4 Port: B4 SDSS * PIN: 4 Port: B4 SDSS
* PIN: 4 Port: B4 V1: EXP1_6 * PIN: 4 Port: B4 V1: EXP1_6
* PIN: 5 Port: B5 AVR_MOSI_PIN * PIN: 5 Port: B5 AVR_MOSI_PIN
* . MOSI_PIN * . SD_MOSI_PIN
* PIN: 6 Port: B6 AVR_MISO_PIN * PIN: 6 Port: B6 AVR_MISO_PIN
* . EXP1_9(MISO_PIN) * . EXP1_9(SD_MISO_PIN)
* PIN: 7 Port: B7 AVR_SCK_PIN * PIN: 7 Port: B7 AVR_SCK_PIN
* . EXP1_10(SCK_PIN) * . EXP1_10(SD_SCK_PIN)
* PIN: 8 Port: D0 RXD * PIN: 8 Port: D0 RXD
* PIN: 9 Port: D1 TXD * PIN: 9 Port: D1 TXD
* PIN: 10 Port: D2 EXP1_8 * PIN: 10 Port: D2 EXP1_8

2
Marlin/src/pins/stm32f0/pins_MALYAN_M300.h
View file

@ -41,7 +41,7 @@
// //
// SD CARD SPI // SD CARD SPI
// //
#define SDSS SS_PIN #define SDSS SD_SS_PIN
// //
// Timers // Timers

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h
View file

@ -280,7 +280,7 @@
#define SD_DETECT_PIN PC4 #define SD_DETECT_PIN PC4
#elif SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #elif SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
#define SD_DETECT_PIN PA15 #define SD_DETECT_PIN PA15
#define SS_PIN PA10 #define SD_SS_PIN PA10
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP." #error "SD CUSTOM_CABLE is not compatible with SKR E3 DIP."
#endif #endif

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h
View file

@ -274,7 +274,7 @@
#define SD_DETECT_PIN PC4 #define SD_DETECT_PIN PC4
#elif SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL) #elif SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL)
#define SD_DETECT_PIN PB5 #define SD_DETECT_PIN PB5
#define SS_PIN PA10 #define SD_SS_PIN PA10
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)
#error "SD CUSTOM_CABLE is not compatible with SKR Mini E3." #error "SD CUSTOM_CABLE is not compatible with SKR Mini E3."
#endif #endif

16
Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h
View file

@ -217,16 +217,16 @@
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SPI_DEVICE 3 #define SPI_DEVICE 3
#define SD_DETECT_PIN PB9 #define SD_DETECT_PIN PB9
#define SCK_PIN PB3 #define SD_SCK_PIN PB3
#define MISO_PIN PB4 #define SD_MISO_PIN PB4
#define MOSI_PIN PB5 #define SD_MOSI_PIN PB5
#define SS_PIN PA15 #define SD_SS_PIN PA15
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN PA3 #define SD_DETECT_PIN PA3
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define SS_PIN PA4 #define SD_SS_PIN PA4
#endif #endif
#define ONBOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SPI_DEVICE 1 // SPI1
#define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card #define ONBOARD_SD_CS_PIN PA4 // Chip select for "System" SD card

8
Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h
View file

@ -166,10 +166,10 @@
// //
#if SD_CONNECTION_IS(ONBOARD) #if SD_CONNECTION_IS(ONBOARD)
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define SS_PIN PA4 #define SD_SS_PIN PA4
#endif #endif
#define ONBOARD_SPI_DEVICE 1 // SPI1 #define ONBOARD_SPI_DEVICE 1 // SPI1

8
Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h
View file

@ -175,10 +175,10 @@
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// Needs to use SPI2 // Needs to use SPI2
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SS_PIN PB12 #define SD_SS_PIN PB12
// //
// SD Card // SD Card

8
Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h
View file

@ -190,10 +190,10 @@
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
// so SPI2 is required. // so SPI2 is required.
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SS_PIN PB12 #define SD_SS_PIN PB12
// //
// SD Card // SD Card

14
Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
View file

@ -62,9 +62,9 @@
// SPI // SPI
// Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface. // Note: FLSun Hispeed (clone MKS_Robin_miniV2) board is using SPI2 interface.
// //
#define SCK_PIN PB13 // SPI2 #define SD_SCK_PIN PB13 // SPI2
#define MISO_PIN PB14 // SPI2 #define SD_MISO_PIN PB14 // SPI2
#define MOSI_PIN PB15 // SPI2 #define SD_MOSI_PIN PB15 // SPI2
#define SPI_DEVICE 2 #define SPI_DEVICE 2
// SPI Flash // SPI Flash
@ -246,10 +246,10 @@
// Use the on-board card socket labeled SD_Extender // Use the on-board card socket labeled SD_Extender
#if SD_CONNECTION_IS(CUSTOM_CABLE) #if SD_CONNECTION_IS(CUSTOM_CABLE)
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define SS_PIN -1 #define SD_SS_PIN -1
#define SD_DETECT_PIN PD12 // SD_CD (if -1 no detection) #define SD_DETECT_PIN PD12 // SD_CD (if -1 no detection)
#else #else
#define SDIO_SUPPORT #define SDIO_SUPPORT

10
Marlin/src/pins/stm32f1/pins_FLY_MINI.h
View file

@ -133,12 +133,12 @@
// LCD / Controller // LCD / Controller
// //
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#define SS_PIN PB12 #define SD_SS_PIN PB12
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SDSS SS_PIN #define SDSS SD_SS_PIN
#define SD_DETECT_PIN PB11 #define SD_DETECT_PIN PB11
#define BEEPER_PIN PC14 #define BEEPER_PIN PC14

18
Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
View file

@ -216,23 +216,23 @@
// //
// SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
// //
#define SS_PIN PC11 #define SD_SS_PIN PC11
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define SD_DETECT_PIN PC7 #define SD_DETECT_PIN PC7
#else #else
// //
// Use the on-board card socket labeled TF_CARD_SOCKET // Use the on-board card socket labeled TF_CARD_SOCKET
// //
#define SS_PIN PA4 #define SD_SS_PIN PA4
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define SD_DETECT_PIN -1 // Card detect is not connected #define SD_DETECT_PIN -1 // Card detect is not connected
#endif #endif
#define SDSS SS_PIN #define SDSS SD_SS_PIN
// //
// ESP WiFi can be soldered to J9 connector which is wired to USART2. // ESP WiFi can be soldered to J9 connector which is wired to USART2.

18
Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
View file

@ -210,23 +210,23 @@
// //
// SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
// //
#define SS_PIN PC11 #define SD_SS_PIN PC11
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define SD_DETECT_PIN PC7 #define SD_DETECT_PIN PC7
#else #else
// //
// Use the on-board card socket labeled TF_CARD_SOCKET // Use the on-board card socket labeled TF_CARD_SOCKET
// //
#define SS_PIN PA4 #define SD_SS_PIN PA4
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define SD_DETECT_PIN -1 // Card detect is not connected #define SD_DETECT_PIN -1 // Card detect is not connected
#endif #endif
#define SDSS SS_PIN #define SDSS SD_SS_PIN
// //
// ESP WiFi can be soldered to J9 connector which is wired to USART2. // ESP WiFi can be soldered to J9 connector which is wired to USART2.

18
Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
View file

@ -216,23 +216,23 @@
// //
// SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
// //
#define SS_PIN PC11 #define SD_SS_PIN PC11
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define SD_DETECT_PIN PC7 #define SD_DETECT_PIN PC7
#else #else
// //
// Use the on-board card socket labeled TF_CARD_SOCKET // Use the on-board card socket labeled TF_CARD_SOCKET
// //
#define SS_PIN PA4 #define SD_SS_PIN PA4
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define SD_DETECT_PIN -1 // Card detect is not connected #define SD_DETECT_PIN -1 // Card detect is not connected
#endif #endif
#define SDSS SS_PIN #define SDSS SD_SS_PIN
// //
// ESP WiFi can be soldered to J9 connector which is wired to USART2. // ESP WiFi can be soldered to J9 connector which is wired to USART2.

18
Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
View file

@ -212,24 +212,24 @@
// //
// SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector // SD Card on RepRapDiscount Smart Controller (J2) or on SD_CARD connector
// //
#define SS_PIN PB12 // PC11 #define SD_SS_PIN PB12 // PC11
#define SCK_PIN PB13 // PC12 // PC1 #define SD_SCK_PIN PB13 // PC12 // PC1
#define MOSI_PIN PB15 // PD2 // PD2 #define SD_MOSI_PIN PB15 // PD2 // PD2
#define MISO_PIN PB14 // PC8 #define SD_MISO_PIN PB14 // PC8
#define SD_DETECT_PIN PC7 #define SD_DETECT_PIN PC7
#else #else
// //
// Use the on-board card socket labeled TF_CARD_SOCKET // Use the on-board card socket labeled TF_CARD_SOCKET
// //
#define SS_PIN PA4 #define SD_SS_PIN PA4
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define MISO_PIN PA6 // PA6 #define SD_MISO_PIN PA6 // PA6
#define SD_DETECT_PIN -1 // Card detect is not connected #define SD_DETECT_PIN -1 // Card detect is not connected
#endif #endif
#define SDSS SS_PIN #define SDSS SD_SS_PIN
// //
// ESP WiFi can be soldered to J9 connector which is wired to USART2. // ESP WiFi can be soldered to J9 connector which is wired to USART2.

2
Marlin/src/pins/stm32f1/pins_MALYAN_M200.h
View file

@ -41,7 +41,7 @@
#define FLASH_EEPROM_EMULATION #define FLASH_EEPROM_EMULATION
#endif #endif
#define SDSS SS_PIN #define SDSS SD_SS_PIN
// Based on PWM timer usage, we have to use these timers and soft PWM for the fans // Based on PWM timer usage, we have to use these timers and soft PWM for the fans
// On STM32F103: // On STM32F103:

14
Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
View file

@ -168,9 +168,9 @@
#define SDIO_CLOCK 4500000 #define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16 #define SDIO_READ_RETRIES 16
#if ENABLED(SDIO_SUPPORT) #if ENABLED(SDIO_SUPPORT)
#define SCK_PIN PB13 // SPI2 #define SD_SCK_PIN PB13 // SPI2
#define MISO_PIN PB14 // SPI2 #define SD_MISO_PIN PB14 // SPI2
#define MOSI_PIN PB15 // SPI2 #define SD_MOSI_PIN PB15 // SPI2
/** /**
* MKS Robin has a few hardware revisions * MKS Robin has a few hardware revisions
* https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware * https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware
@ -184,10 +184,10 @@
//#define SD_DETECT_PIN PF12 // SD_CD //#define SD_DETECT_PIN PF12 // SD_CD
#else #else
// SD as custom software SPI (SDIO pins) // SD as custom software SPI (SDIO pins)
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define SS_PIN -1 #define SD_SS_PIN -1
#define ONBOARD_SD_CS_PIN PC11 #define ONBOARD_SD_CS_PIN PC11
#define SDSS PD2 #define SDSS PD2
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1

8
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h
View file

@ -180,10 +180,10 @@
// //
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#define SD_DETECT_PIN PC10 #define SD_DETECT_PIN PC10
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SS_PIN PA15 #define SD_SS_PIN PA15
#ifndef BOARD_ST7920_DELAY_1 #ifndef BOARD_ST7920_DELAY_1
#define BOARD_ST7920_DELAY_1 DELAY_NS(125) #define BOARD_ST7920_DELAY_1 DELAY_NS(125)

8
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h
View file

@ -142,7 +142,7 @@
// SPI // SPI
// //
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN P1B4 #define SD_MISO_PIN P1B4
#define MOSI_PIN P1B5 #define SD_MOSI_PIN P1B5
#define SS_PIN PA15 #define SD_SS_PIN PA15

8
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h
View file

@ -153,7 +153,7 @@
// SPI // SPI
// //
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SS_PIN PA15 #define SD_SS_PIN PA15

8
Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h
View file

@ -193,10 +193,10 @@
#if SD_CONNECTION_IS(LCD) #if SD_CONNECTION_IS(LCD)
#define SD_DETECT_PIN PG3 #define SD_DETECT_PIN PG3
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SS_PIN PG6 #define SD_SS_PIN PG6
#elif SD_CONNECTION_IS(ONBOARD) #elif SD_CONNECTION_IS(ONBOARD)
#define SDIO_SUPPORT #define SDIO_SUPPORT
#define SD_DETECT_PIN PD12 #define SD_DETECT_PIN PD12

16
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
View file

@ -166,17 +166,17 @@
#define SPI_DEVICE 2 #define SPI_DEVICE 2
#if ENABLED(SDIO_SUPPORT) #if ENABLED(SDIO_SUPPORT)
#define SCK_PIN PB13 // SPI2 ok #define SD_SCK_PIN PB13 // SPI2 ok
#define MISO_PIN PB14 // SPI2 ok #define SD_MISO_PIN PB14 // SPI2 ok
#define MOSI_PIN PB15 // SPI2 ok #define SD_MOSI_PIN PB15 // SPI2 ok
#define SS_PIN PC11 // PB12 is X- ok #define SD_SS_PIN PC11 // PB12 is X- ok
#define SD_DETECT_PIN -1 // SD_CD ok #define SD_DETECT_PIN -1 // SD_CD ok
#else #else
// SD as custom software SPI (SDIO pins) // SD as custom software SPI (SDIO pins)
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define SS_PIN -1 #define SD_SS_PIN -1
#define ONBOARD_SD_CS_PIN PC11 #define ONBOARD_SD_CS_PIN PC11
#define SDSS PD2 #define SDSS PD2
#define SD_DETECT_PIN -1 #define SD_DETECT_PIN -1

6
Marlin/src/pins/stm32f4/pins_ANET_ET4.h
View file

@ -210,9 +210,9 @@
#if DISABLED(SDIO_SUPPORT) #if DISABLED(SDIO_SUPPORT)
#define SOFTWARE_SPI #define SOFTWARE_SPI
#define SDSS SDIO_D3_PIN #define SDSS SDIO_D3_PIN
#define SCK_PIN SDIO_CK_PIN #define SD_SCK_PIN SDIO_CK_PIN
#define MISO_PIN SDIO_D0_PIN #define SD_MISO_PIN SDIO_D0_PIN
#define MOSI_PIN SDIO_CMD_PIN #define SD_MOSI_PIN SDIO_CMD_PIN
#endif #endif
#ifndef SD_DETECT_PIN #ifndef SD_DETECT_PIN

6
Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h
View file

@ -156,8 +156,8 @@
#ifndef SDIO_SUPPORT #ifndef SDIO_SUPPORT
#define SOFTWARE_SPI // Use soft SPI for onboard SD #define SOFTWARE_SPI // Use soft SPI for onboard SD
#define SDSS SDIO_D3_PIN #define SDSS SDIO_D3_PIN
#define SCK_PIN SDIO_CK_PIN #define SD_SCK_PIN SDIO_CK_PIN
#define MISO_PIN SDIO_D0_PIN #define SD_MISO_PIN SDIO_D0_PIN
#define MOSI_PIN SDIO_CMD_PIN #define SD_MOSI_PIN SDIO_CMD_PIN
#endif #endif
#endif #endif

8
Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h
View file

@ -175,10 +175,10 @@
// HAL SPI1 pins // HAL SPI1 pins
#define CUSTOM_SPI_PINS #define CUSTOM_SPI_PINS
#if ENABLED(CUSTOM_SPI_PINS) #if ENABLED(CUSTOM_SPI_PINS)
#define SCK_PIN PA5 // SPI1 SCLK #define SD_SCK_PIN PA5 // SPI1 SCLK
#define SS_PIN PA4 // SPI1 SSEL #define SD_SS_PIN PA4 // SPI1 SSEL
#define MISO_PIN PA6 // SPI1 MISO #define SD_MISO_PIN PA6 // SPI1 MISO
#define MOSI_PIN PA7 // SPI1 MOSI #define SD_MOSI_PIN PA7 // SPI1 MOSI
#endif #endif
// //

8
Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h
View file

@ -341,10 +341,10 @@
// Instruct the STM32 HAL to override the default SPI pins from the variant.h file // Instruct the STM32 HAL to override the default SPI pins from the variant.h file
#define CUSTOM_SPI_PINS #define CUSTOM_SPI_PINS
#define SDSS PA4 #define SDSS PA4
#define SS_PIN SDSS #define SD_SS_PIN SDSS
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define SD_DETECT_PIN PC4 #define SD_DETECT_PIN PC4
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)

6
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
View file

@ -303,9 +303,9 @@
// so force Software SPI to work around this issue. // so force Software SPI to work around this issue.
#define SOFTWARE_SPI #define SOFTWARE_SPI
#define SDSS PA4 #define SDSS PA4
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define MOSI_PIN PB5 #define SD_MOSI_PIN PB5
#define SD_DETECT_PIN PB11 #define SD_DETECT_PIN PB11
#elif SD_CONNECTION_IS(CUSTOM_CABLE) #elif SD_CONNECTION_IS(CUSTOM_CABLE)

12
Marlin/src/pins/stm32f4/pins_FLYF407ZG.h
View file

@ -196,16 +196,16 @@
#ifndef SDIO_SUPPORT #ifndef SDIO_SUPPORT
#define SOFTWARE_SPI // Use soft SPI for onboard SD #define SOFTWARE_SPI // Use soft SPI for onboard SD
#define SDSS SDIO_D3_PIN #define SDSS SDIO_D3_PIN
#define SCK_PIN SDIO_CK_PIN #define SD_SCK_PIN SDIO_CK_PIN
#define MISO_PIN SDIO_D0_PIN #define SD_MISO_PIN SDIO_D0_PIN
#define MOSI_PIN SDIO_CMD_PIN #define SD_MOSI_PIN SDIO_CMD_PIN
#endif #endif
#elif SD_CONNECTION_IS(LCD) #elif SD_CONNECTION_IS(LCD)
#define SCK_PIN PB13 #define SD_SCK_PIN PB13
#define MISO_PIN PB14 #define SD_MISO_PIN PB14
#define MOSI_PIN PB15 #define SD_MOSI_PIN PB15
#define SDSS PF11 #define SDSS PF11
#define SD_DETECT_PIN PB2 #define SD_DETECT_PIN PB2

6
Marlin/src/pins/stm32f4/pins_FYSETC_S6.h
View file

@ -180,9 +180,9 @@
// //
// SPI // SPI
// //
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
// //
// Misc. Functions // Misc. Functions

8
Marlin/src/pins/stm32f4/pins_LERDGE_K.h
View file

@ -153,10 +153,10 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT #define POWER_LOSS_PIN PA4 // Power-loss / nAC_FAULT
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define SS_PIN PC11 #define SD_SS_PIN PC11
#define SD_DETECT_PIN PA8 #define SD_DETECT_PIN PA8
#define BEEPER_PIN PC7 #define BEEPER_PIN PC7

8
Marlin/src/pins/stm32f4/pins_LERDGE_S.h
View file

@ -158,10 +158,10 @@
#define SDIO_SUPPORT #define SDIO_SUPPORT
#define SDIO_CLOCK 4800000 #define SDIO_CLOCK 4800000
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define SS_PIN PC11 #define SD_SS_PIN PC11
#define SD_DETECT_PIN PG15 #define SD_DETECT_PIN PG15

8
Marlin/src/pins/stm32f4/pins_LERDGE_X.h
View file

@ -117,10 +117,10 @@
// Lerdge supports auto-power off and power loss sense through a single pin. // Lerdge supports auto-power off and power loss sense through a single pin.
#define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT #define POWER_LOSS_PIN PC14 // Power-loss / nAC_FAULT
#define SCK_PIN PC12 #define SD_SCK_PIN PC12
#define MISO_PIN PC8 #define SD_MISO_PIN PC8
#define MOSI_PIN PD2 #define SD_MOSI_PIN PD2
#define SS_PIN PC11 #define SD_SS_PIN PC11
// //
// SD support // SD support

14
Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h
View file

@ -217,11 +217,11 @@
#define CUSTOM_SPI_PINS // TODO: needed because is the only way to set SPI3 for SD on STM32 (by now) #define CUSTOM_SPI_PINS // TODO: needed because is the only way to set SPI3 for SD on STM32 (by now)
#if ENABLED(CUSTOM_SPI_PINS) #if ENABLED(CUSTOM_SPI_PINS)
#define ENABLE_SPI3 #define ENABLE_SPI3
#define SS_PIN -1 #define SD_SS_PIN -1
#define SDSS PC9 #define SDSS PC9
#define SCK_PIN PC10 #define SD_SCK_PIN PC10
#define MISO_PIN PC11 #define SD_MISO_PIN PC11
#define MOSI_PIN PC12 #define SD_MOSI_PIN PC12
#define SD_DETECT_PIN PD12 #define SD_DETECT_PIN PD12
#endif #endif
#endif #endif
@ -234,9 +234,9 @@
#if ENABLED(CUSTOM_SPI_PINS) #if ENABLED(CUSTOM_SPI_PINS)
#define ENABLE_SPI1 #define ENABLE_SPI1
#define SDSS PE10 #define SDSS PE10
#define SCK_PIN PA5 #define SD_SCK_PIN PA5
#define MISO_PIN PA6 #define SD_MISO_PIN PA6
#define MOSI_PIN PA7 #define SD_MOSI_PIN PA7
#define SD_DETECT_PIN PE12 #define SD_DETECT_PIN PE12
#endif #endif
#endif #endif

Some files were not shown because too many files have changed in this diff Show more