zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Clean up spaces and words

Browse source
This commit is contained in:
Scott Lahteine 2021-03-10 11:35:19 -06:00
parent fe0b770033
commit 2c62886c71
5 changed files with 26 additions and 25 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
Marlin/src/MarlinCore.cpp
View file

@ -990,14 +990,14 @@ void setup() {
#endif
#define SETUP_RUN(C) do{ SETUP_LOG(STRINGIFY(C)); C; }while(0)
MYSERIAL0.begin(BAUDRATE);
MYSERIAL1.begin(BAUDRATE);
millis_t serial_connect_timeout = millis() + 1000UL;
while (!MYSERIAL0.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
while (!MYSERIAL1.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#if HAS_MULTI_SERIAL && !HAS_ETHERNET
MYSERIAL1.begin(BAUDRATE);
MYSERIAL2.begin(BAUDRATE);
serial_connect_timeout = millis() + 1000UL;
while (!MYSERIAL1.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
while (!MYSERIAL2.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
#endif
SERIAL_ECHOLNPGM("start");
@ -1053,7 +1053,7 @@ void setup() {
#if HAS_FILAMENT_SENSOR
SETUP_RUN(runout.setup());
#endif
#if HAS_TMC220x
SETUP_RUN(tmc_serial_begin());
#endif

2
Marlin/src/gcode/host/M115.cpp
View file

@ -144,7 +144,7 @@ void GcodeSuite::M115() {
// COOLER_TEMPERATURE (M143, M193)
cap_line(PSTR("COOLER_TEMPERATURE"), ENABLED(HAS_COOLER));
// MEATPACK Compresson
// MEATPACK Compression
cap_line(PSTR("MEATPACK"), ENABLED(MEATPACK));
// Machine Geometry

18
Marlin/src/gcode/queue.cpp
View file

@ -272,7 +272,7 @@ void GCodeQueue::flush_and_request_resend(const serial_index_t serial_ind) {
SERIAL_ECHOLN(serial_state[serial_ind.index].last_N + 1);
}
inline bool serial_data_available(serial_index_t index) {
static bool serial_data_available(serial_index_t index) {
const int a = SERIAL_IMPL.available(index);
#if BOTH(RX_BUFFER_MONITOR, RX_BUFFER_SIZE)
if (a > RX_BUFFER_SIZE - 2) {
@ -283,13 +283,15 @@ inline bool serial_data_available(serial_index_t index) {
return a > 0;
}
// Multiserial already handles dispatch to/from multiple ports
inline bool any_serial_data_available() {
LOOP_L_N(p, NUM_SERIAL)
if (serial_data_available(p))
return true;
return false;
}
#if NO_TIMEOUTS > 0
// Multiserial already handles dispatch to/from multiple ports
static bool any_serial_data_available() {
LOOP_L_N(p, NUM_SERIAL)
if (serial_data_available(p))
return true;
return false;
}
#endif
inline int read_serial(const serial_index_t index) { return SERIAL_IMPL.read(index); }

3
Marlin/src/inc/SanityCheck.h
View file

@ -3337,12 +3337,11 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#endif
#endif
/**
* Sanity Check for MEATPACK and BINARY_FILE_TRANSFER Features
*/
#if BOTH(MEATPACK, BINARY_FILE_TRANSFER)
#error "Either enable MEATPACK or enable BINARY_FILE_TRANSFER."
#error "Either enable MEATPACK or BINARY_FILE_TRANSFER, not both."
#endif
/**

18
Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h
View file

@ -237,7 +237,7 @@
* This board does not have dedicated TMC UART pins. Custom wiring is needed.
* You may uncomment one of the options below, or add it to your Configuration.h.
*
* When using up to four TMC2209 drivers, hardware serial is recommented on
* When using up to four TMC2209 drivers, hardware serial is recommended on
* MSerial0 or MSerial1.
*
* When using TMC2208 or more than four drivers, SoftwareSerial will be needed,
@ -246,14 +246,14 @@
//#define TMC_HARDWARE_SERIAL
#if ENABLED(TMC_HARDWARE_SERIAL)
#define X_HARDWARE_SERIAL MSerial0
#define X2_HARDWARE_SERIAL MSerial0
#define Y_HARDWARE_SERIAL MSerial0
#define Y2_HARDWARE_SERIAL MSerial0
#define Z_HARDWARE_SERIAL MSerial0
#define Z2_HARDWARE_SERIAL MSerial0
#define E0_HARDWARE_SERIAL MSerial0
#define E1_HARDWARE_SERIAL MSerial0
#define X_HARDWARE_SERIAL MSerial0
#define X2_HARDWARE_SERIAL MSerial0
#define Y_HARDWARE_SERIAL MSerial0
#define Y2_HARDWARE_SERIAL MSerial0
#define Z_HARDWARE_SERIAL MSerial0
#define Z2_HARDWARE_SERIAL MSerial0
#define E0_HARDWARE_SERIAL MSerial0
#define E1_HARDWARE_SERIAL MSerial0
#endif
//#define TMC_SOFTWARE_SERIAL