Merge pull request #10651 from thinkyhead/bf2_junction_deviation

[2.0.x] Junction Deviation

.travis.yml

@@ -84,7 +84,7 @@ script:
   - opt_set TEMP_SENSOR_4 999
   - opt_set TEMP_SENSOR_BED 1
   - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
-  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME
+  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION
   - build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
   #
   # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language

Marlin/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/HAL/HAL_AVR/math_AVR.h

@@ -23,6 +23,8 @@
 #ifndef _MATH_AVR_H_
 #define _MATH_AVR_H_
 
+#define a(CODE) " " CODE "\n\t"
+
 /**
  * Optimized math functions for AVR
  */
@@ -39,41 +41,41 @@
 //
 #define MultiU24X32toH16(intRes, longIn1, longIn2) \
   asm volatile ( \
-                 "clr r26 \n\t" \
+                 A("clr r26")      \
-                 "mul %A1, %B2 \n\t" \
+                 A("mul %A1, %B2") \
-                 "mov r27, r1 \n\t" \
+                 A("mov r27, r1")  \
-                 "mul %B1, %C2 \n\t" \
+                 A("mul %B1, %C2") \
-                 "movw %A0, r0 \n\t" \
+                 A("movw %A0, r0") \
-                 "mul %C1, %C2 \n\t" \
+                 A("mul %C1, %C2") \
-                 "add %B0, r0 \n\t" \
+                 A("add %B0, r0")  \
-                 "mul %C1, %B2 \n\t" \
+                 A("mul %C1, %B2") \
-                 "add %A0, r0 \n\t" \
+                 A("add %A0, r0")  \
-                 "adc %B0, r1 \n\t" \
+                 A("adc %B0, r1")  \
-                 "mul %A1, %C2 \n\t" \
+                 A("mul %A1, %C2") \
-                 "add r27, r0 \n\t" \
+                 A("add r27, r0")  \
-                 "adc %A0, r1 \n\t" \
+                 A("adc %A0, r1")  \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "mul %B1, %B2 \n\t" \
+                 A("mul %B1, %B2") \
-                 "add r27, r0 \n\t" \
+                 A("add r27, r0")  \
-                 "adc %A0, r1 \n\t" \
+                 A("adc %A0, r1")  \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "mul %C1, %A2 \n\t" \
+                 A("mul %C1, %A2") \
-                 "add r27, r0 \n\t" \
+                 A("add r27, r0")  \
-                 "adc %A0, r1 \n\t" \
+                 A("adc %A0, r1")  \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "mul %B1, %A2 \n\t" \
+                 A("mul %B1, %A2") \
-                 "add r27, r1 \n\t" \
+                 A("add r27, r1")  \
-                 "adc %A0, r26 \n\t" \
+                 A("adc %A0, r26") \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "lsr r27 \n\t" \
+                 A("lsr r27")      \
-                 "adc %A0, r26 \n\t" \
+                 A("adc %A0, r26") \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "mul %D2, %A1 \n\t" \
+                 A("mul %D2, %A1") \
-                 "add %A0, r0 \n\t" \
+                 A("add %A0, r0")  \
-                 "adc %B0, r1 \n\t" \
+                 A("adc %B0, r1")  \
-                 "mul %D2, %B1 \n\t" \
+                 A("mul %D2, %B1") \
-                 "add %B0, r0 \n\t" \
+                 A("add %B0, r0")  \
-                 "clr r1 \n\t" \
+                 A("clr r1")       \
                  : \
                  "=&r" (intRes) \
                  : \
@@ -89,16 +91,16 @@
 // r27 to store the byte 1 of the 24 bit result
 #define MultiU16X8toH16(intRes, charIn1, intIn2) \
   asm volatile ( \
-                 "clr r26 \n\t" \
+                 A("clr r26")      \
-                 "mul %A1, %B2 \n\t" \
+                 A("mul %A1, %B2") \
-                 "movw %A0, r0 \n\t" \
+                 A("movw %A0, r0") \
-                 "mul %A1, %A2 \n\t" \
+                 A("mul %A1, %A2") \
-                 "add %A0, r1 \n\t" \
+                 A("add %A0, r1")  \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "lsr r0 \n\t" \
+                 A("lsr r0")       \
-                 "adc %A0, r26 \n\t" \
+                 A("adc %A0, r26") \
-                 "adc %B0, r26 \n\t" \
+                 A("adc %B0, r26") \
-                 "clr r1 \n\t" \
+                 A("clr r1")       \
                  : \
                  "=&r" (intRes) \
                  : \

Marlin/src/HAL/HAL_DUE/DebugMonitor_Due.cpp

@@ -36,7 +36,7 @@
 // state we are when running them
 
 // A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() asm volatile("": : :"memory");
+#define sw_barrier() __asm__ volatile("": : :"memory");
 
 // (re)initialize UART0 as a monitor output to 250000,n,8,1
 static void TXBegin(void) {
@@ -230,106 +230,106 @@ void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause
 
 __attribute__((naked)) void NMI_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#0             \n"
+    A("mov r2,#0")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 __attribute__((naked)) void HardFault_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#1             \n"
+    A("mov r2,#1")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 __attribute__((naked)) void MemManage_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#2             \n"
+    A("mov r2,#2")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 __attribute__((naked)) void BusFault_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#3             \n"
+    A("mov r2,#3")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 __attribute__((naked)) void UsageFault_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#4             \n"
+    A("mov r2,#4")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 __attribute__((naked)) void DebugMon_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#5             \n"
+    A("mov r2,#5")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 /* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
 __attribute__((naked)) void WDT_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#6             \n"
+    A("mov r2,#6")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 
 __attribute__((naked)) void RSTC_Handler(void) {
   __asm__ __volatile__ (
-    ".syntax unified        \n"
+    ".syntax unified" "\n\t"
-    " tst lr, #4            \n"
+    A("tst lr, #4")
-    " ite eq                \n"
+    A("ite eq")
-    " mrseq r0, msp         \n"
+    A("mrseq r0, msp")
-    " mrsne r0, psp         \n"
+    A("mrsne r0, psp")
-    " mov r1,lr             \n"
+    A("mov r1,lr")
-    " mov r2,#7             \n"
+    A("mov r2,#7")
-    " b HardFault_HandlerC  \n"
+    A("b HardFault_HandlerC")
   );
 }
 

Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp

@@ -77,10 +77,10 @@
     __asm__ __volatile__(
       ".syntax unified" "\n\t" // is to prevent CM0,CM1 non-unified syntax
 
-      "loop%=:" "\n\t"
+      L("loop%=")
-      " subs %[cnt],#1" "\n\t"
+      A("subs %[cnt],#1")
-      EXTRA_NOP_CYCLES "\n\t"
+      A(EXTRA_NOP_CYCLES)
-      " bne loop%=" "\n\t"
+      A("bne loop%=")
       : [cnt]"+r"(cy) // output: +r means input+output
       : // input:
       : "cc" // clobbers:
@@ -141,54 +141,54 @@
       ".syntax unified" "\n\t" // is to prevent CM0,CM1 non-unified syntax
 
       /* Bit 7 */
-      " ubfx %[idx],%[txval],#7,#1" "\n\t"                      /* Place bit 7 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#7,#1")                      /* Place bit 7 in bit 0 of idx*/
 
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#6,#1" "\n\t"                      /* Place bit 6 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#6,#1")                      /* Place bit 6 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 6 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#5,#1" "\n\t"                      /* Place bit 5 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#5,#1")                      /* Place bit 5 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 5 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#4,#1" "\n\t"                      /* Place bit 4 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#4,#1")                      /* Place bit 4 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 4 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#3,#1" "\n\t"                      /* Place bit 3 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#3,#1")                      /* Place bit 3 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 3 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#2,#1" "\n\t"                      /* Place bit 2 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#2,#1")                      /* Place bit 2 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 2 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#1,#1" "\n\t"                      /* Place bit 1 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#1,#1")                      /* Place bit 1 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 1 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[idx],%[txval],#0,#1" "\n\t"                      /* Place bit 0 in bit 0 of idx*/
+      A("ubfx %[idx],%[txval],#0,#1")                      /* Place bit 0 in bit 0 of idx*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 0 */
-      " str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " nop" "\n\t"                                             /* Result will be 0 */
+      A("nop")                                             /* Result will be 0 */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       : [idx]"+r"( idx )
       : [txval]"r"( bout ) ,
@@ -222,52 +222,52 @@
       ".syntax unified" "\n\t" // is to prevent CM0,CM1 non-unified syntax
 
       /* bit 7 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#7,#1" "\n\t"                /* Store read bit as the bit 7 */
+      A("bfi %[bin],%[work],#7,#1")                /* Store read bit as the bit 7 */
 
       /* bit 6 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#6,#1" "\n\t"                /* Store read bit as the bit 6 */
+      A("bfi %[bin],%[work],#6,#1")                /* Store read bit as the bit 6 */
 
       /* bit 5 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#5,#1" "\n\t"                /* Store read bit as the bit 5 */
+      A("bfi %[bin],%[work],#5,#1")                /* Store read bit as the bit 5 */
 
       /* bit 4 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#4,#1" "\n\t"                /* Store read bit as the bit 4 */
+      A("bfi %[bin],%[work],#4,#1")                /* Store read bit as the bit 4 */
 
       /* bit 3 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#3,#1" "\n\t"                /* Store read bit as the bit 3 */
+      A("bfi %[bin],%[work],#3,#1")                /* Store read bit as the bit 3 */
 
       /* bit 2 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#2,#1" "\n\t"                /* Store read bit as the bit 2 */
+      A("bfi %[bin],%[work],#2,#1")                /* Store read bit as the bit 2 */
 
       /* bit 1 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#1,#1" "\n\t"                /* Store read bit as the bit 1 */
+      A("bfi %[bin],%[work],#1,#1")                /* Store read bit as the bit 1 */
 
       /* bit 0 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#0,#1" "\n\t"                /* Store read bit as the bit 0 */
+      A("bfi %[bin],%[work],#0,#1")                /* Store read bit as the bit 0 */
 
       : [bin]"+r"(bin),
         [work]"+r"(work)
@@ -335,60 +335,60 @@
     __asm__ __volatile__(
       ".syntax unified" "\n\t" // is to prevent CM0,CM1 non-unified syntax
 
-      " loop%=:" "\n\t"
+      L("loop%=")
-      " ldrb.w %[txval], [%[ptr]], #1" "\n\t"                   /* Load value to send, increment buffer */
+      A("ldrb.w %[txval], [%[ptr]], #1")                   /* Load value to send, increment buffer */
-      " mvn %[txval],%[txval]" "\n\t"                           /* Negate value */
+      A("mvn %[txval],%[txval]")                           /* Negate value */
 
       /* Bit 7 */
-      " ubfx %[work],%[txval],#7,#1" "\n\t"                     /* Place bit 7 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#7,#1")                     /* Place bit 7 in bit 0 of work*/
 
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#6,#1" "\n\t"                     /* Place bit 6 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#6,#1")                     /* Place bit 6 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 6 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#5,#1" "\n\t"                     /* Place bit 5 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#5,#1")                     /* Place bit 5 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 5 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#4,#1" "\n\t"                     /* Place bit 4 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#4,#1")                     /* Place bit 4 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 4 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#3,#1" "\n\t"                     /* Place bit 3 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#3,#1")                     /* Place bit 3 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 3 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#2,#1" "\n\t"                     /* Place bit 2 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#2,#1")                     /* Place bit 2 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 2 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#1,#1" "\n\t"                     /* Place bit 1 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#1,#1")                     /* Place bit 1 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 1 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t" /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " ubfx %[work],%[txval],#0,#1" "\n\t"                     /* Place bit 0 in bit 0 of work*/
+      A("ubfx %[work],%[txval],#0,#1")                     /* Place bit 0 in bit 0 of work*/
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
 
       /* Bit 0 */
-      " str %[mosi_mask],[%[mosi_port], %[work],LSL #2]" "\n\t"  /* Access the proper SODR or CODR registers based on that bit */
+      A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]")  /* Access the proper SODR or CODR registers based on that bit */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"                   /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")                   /* SODR */
-      " subs %[todo],#1" "\n\t"                                 /* Decrement count of pending words to send, update status */
+      A("subs %[todo],#1")                                 /* Decrement count of pending words to send, update status */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"              /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")              /* CODR */
-      " bne.n loop%=" "\n\t"                                    /* Repeat until done */
+      A("bne.n loop%=")                                    /* Repeat until done */
 
       : [ptr]"+r" ( ptr ) ,
         [todo]"+r" ( todo ) ,
@@ -413,59 +413,59 @@
     __asm__ __volatile__(
       ".syntax unified" "\n\t" // is to prevent CM0,CM1 non-unified syntax
 
-      " loop%=:" "\n\t"
+      L("loop%=")
 
       /* bit 7 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#7,#1" "\n\t"                /* Store read bit as the bit 7 */
+      A("bfi %[bin],%[work],#7,#1")                /* Store read bit as the bit 7 */
 
       /* bit 6 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#6,#1" "\n\t"                /* Store read bit as the bit 6 */
+      A("bfi %[bin],%[work],#6,#1")                /* Store read bit as the bit 6 */
 
       /* bit 5 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#5,#1" "\n\t"                /* Store read bit as the bit 5 */
+      A("bfi %[bin],%[work],#5,#1")                /* Store read bit as the bit 5 */
 
       /* bit 4 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#4,#1" "\n\t"                /* Store read bit as the bit 4 */
+      A("bfi %[bin],%[work],#4,#1")                /* Store read bit as the bit 4 */
 
       /* bit 3 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#3,#1" "\n\t"                /* Store read bit as the bit 3 */
+      A("bfi %[bin],%[work],#3,#1")                /* Store read bit as the bit 3 */
 
       /* bit 2 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#2,#1" "\n\t"                /* Store read bit as the bit 2 */
+      A("bfi %[bin],%[work],#2,#1")                /* Store read bit as the bit 2 */
 
       /* bit 1 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#1,#1" "\n\t"                /* Store read bit as the bit 1 */
+      A("bfi %[bin],%[work],#1,#1")                /* Store read bit as the bit 1 */
 
       /* bit 0 */
-      " str %[sck_mask],[%[sck_port]]" "\n\t"           /* SODR */
+      A("str %[sck_mask],[%[sck_port]]")           /* SODR */
-      " ldr %[work],[%[bitband_miso_port]]" "\n\t"      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
+      A("ldr %[work],[%[bitband_miso_port]]")      /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */
-      " str %[sck_mask],[%[sck_port],#0x4]" "\n\t"      /* CODR */
+      A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
-      " bfi %[bin],%[work],#0,#1" "\n\t"                /* Store read bit as the bit 0 */
+      A("bfi %[bin],%[work],#0,#1")                /* Store read bit as the bit 0 */
 
-      " subs %[todo],#1" "\n\t"                         /* Decrement count of pending words to send, update status */
+      A("subs %[todo],#1")                         /* Decrement count of pending words to send, update status */
-      " strb.w %[bin], [%[ptr]], #1" "\n\t"             /* Store read value into buffer, increment buffer pointer */
+      A("strb.w %[bin], [%[ptr]], #1")             /* Store read value into buffer, increment buffer pointer */
-      " bne.n loop%=" "\n\t"                            /* Repeat until done */
+      A("bne.n loop%=")                            /* Repeat until done */
 
       : [ptr]"+r"(ptr),
         [todo]"+r"(todo),

Marlin/src/HAL/HAL_DUE/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -71,8 +71,6 @@ void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
   else port->PIO_CODR = mask;
 }
 
-#define nop() __asm__ __volatile__("nop;\n\t":::)
-
 void __delay_4cycles(uint32_t cy) __attribute__ ((weak));
 
 FORCE_INLINE void __delay_4cycles(uint32_t cy) { // +1 cycle
@@ -85,10 +83,10 @@ FORCE_INLINE void __delay_4cycles(uint32_t cy) { // +1 cycle
   __asm__ __volatile__(
     ".syntax unified" "\n\t" // is to prevent CM0,CM1 non-unified syntax
 
-    "loop%=:" "\n\t"
+    L("loop%=")
-    " subs %[cnt],#1" "\n\t"
+    A("subs %[cnt],#1")
-    EXTRA_NOP_CYCLES "\n\t"
+    A(EXTRA_NOP_CYCLES)
-    " bne loop%=" "\n\t"
+    A("bne loop%=")
     : [cnt]"+r"(cy) // output: +r means input+output
     : // input:
     : "cc" // clobbers:

Marlin/src/backtrace/unwarmbytab.cpp

@@ -291,7 +291,7 @@ static inline __attribute__((always_inline)) uint32_t read_psp(void) {
   /* Read the current PSP and return its value as a pointer */
   uint32_t psp;
 
-  __asm volatile (
+  __asm__ volatile (
     "   mrs %0, psp \n"
     : "=r" (psp) : :
   );

Marlin/src/config/default/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,4,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -444,6 +444,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -438,6 +438,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -433,6 +433,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -431,6 +431,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 

Marlin/src/core/macros.h

@@ -110,6 +110,9 @@
 #define STRINGIFY_(M) #M
 #define STRINGIFY(M) STRINGIFY_(M)
 
+#define A(CODE) " " CODE "\n\t"
+#define L(CODE) CODE ":\n\t"
+
 // Macros for bit masks
 #undef _BV
 #define _BV(b) (1 << (b))

Marlin/src/libs/softspi.h

@@ -639,7 +639,7 @@ class DigitalPin {
 
 //------------------------------------------------------------------------------
 /** Nop for timing. */
-#define nop asm volatile ("nop\n\t")
+#define nop __asm__ volatile ("nop")
 //------------------------------------------------------------------------------
 /** Pin Mode for MISO is input.*/
 const bool MISO_MODE  = false;

Marlin/src/module/planner.cpp

@@ -409,7 +409,7 @@ void Planner::init() {
         // %8:%7:%6 = interval
         // r31:r30: MUST be those registers, and they must point to the inv_tab
 
-        " clr %13" "\n\t"                 // %13 = 0
+        A("clr %13")                       // %13 = 0
 
         // Now we must compute
         // result = 0xFFFFFF / d
@@ -421,122 +421,122 @@ void Planner::init() {
         // use Newton-Raphson for the calculation, and will strive to get way less cycles
         // for the same result - Using C division, it takes 500cycles to complete .
 
-        " clr %3" "\n\t"                  // idx = 0
+        A("clr %3")                        // idx = 0
-        " mov %14,%6" "\n\t"
+        A("mov %14,%6")      
-        " mov %15,%7" "\n\t"
+        A("mov %15,%7")      
-        " mov %16,%8" "\n\t"              // nr = interval
+        A("mov %16,%8")                    // nr = interval
-        " tst %16" "\n\t"                 // nr & 0xFF0000 == 0 ?
+        A("tst %16")                       // nr & 0xFF0000 == 0 ?
-        " brne 2f" "\n\t"                 // No, skip this
+        A("brne 2f")                       // No, skip this
-        " mov %16,%15" "\n\t"
+        A("mov %16,%15")      
-        " mov %15,%14" "\n\t"             // nr <<= 8, %14 not needed
+        A("mov %15,%14")                   // nr <<= 8, %14 not needed
-        " subi %3,-8" "\n\t"              // idx += 8
+        A("subi %3,-8")                    // idx += 8
-        " tst %16" "\n\t"                 // nr & 0xFF0000 == 0 ?
+        A("tst %16")                       // nr & 0xFF0000 == 0 ?
-        " brne 2f" "\n\t"                 // No, skip this
+        A("brne 2f")                       // No, skip this
-        " mov %16,%15" "\n\t"             // nr <<= 8, %14 not needed
+        A("mov %16,%15")                   // nr <<= 8, %14 not needed
-        " clr %15" "\n\t"                 // We clear %14
+        A("clr %15")                       // We clear %14
-        " subi %3,-8" "\n\t"              // idx += 8
+        A("subi %3,-8")                    // idx += 8
 
         // here %16 != 0 and %16:%15 contains at least 9 MSBits, or both %16:%15 are 0
-        "2:" "\n\t"
+        L("2")
-        " cpi %16,0x10" "\n\t"            // (nr & 0xf00000) == 0 ?
+        A("cpi %16,0x10")                  // (nr & 0xF00000) == 0 ?
-        " brcc 3f" "\n\t"                 // No, skip this
+        A("brcc 3f")                       // No, skip this
-        " swap %15" "\n\t"                // Swap nibbles
+        A("swap %15")                      // Swap nibbles
-        " swap %16" "\n\t"                // Swap nibbles. Low nibble is 0
+        A("swap %16")                      // Swap nibbles. Low nibble is 0
-        " mov %14, %15" "\n\t"
+        A("mov %14, %15")      
-        " andi %14,0x0f" "\n\t"           // Isolate low nibble
+        A("andi %14,0x0F")                 // Isolate low nibble
-        " andi %15,0xf0" "\n\t"           // Keep proper nibble in %15
+        A("andi %15,0xF0")                 // Keep proper nibble in %15
-        " or %16, %14" "\n\t"             // %16:%15 <<= 4
+        A("or %16, %14")                   // %16:%15 <<= 4
-        " subi %3,-4" "\n\t"              // idx += 4
+        A("subi %3,-4")                    // idx += 4
 
-        "3:" "\n\t"
+        L("3")
-        " cpi %16,0x40" "\n\t"            // (nr & 0xc00000) == 0 ?
+        A("cpi %16,0x40")                  // (nr & 0xC00000) == 0 ?
-        " brcc 4f" "\n\t"                 // No, skip this
+        A("brcc 4f")                       // No, skip this
-        " add %15,%15" "\n\t"
+        A("add %15,%15")      
-        " adc %16,%16" "\n\t"
+        A("adc %16,%16")      
-        " add %15,%15" "\n\t"
+        A("add %15,%15")      
-        " adc %16,%16" "\n\t"             // %16:%15 <<= 2
+        A("adc %16,%16")                   // %16:%15 <<= 2
-        " subi %3,-2" "\n\t"              // idx += 2
+        A("subi %3,-2")                    // idx += 2
 
-        "4:" "\n\t"
+        L("4")
-        " cpi %16,0x80" "\n\t"            // (nr & 0x800000) == 0 ?
+        A("cpi %16,0x80")                  // (nr & 0x800000) == 0 ?
-        " brcc 5f" "\n\t"                 // No, skip this
+        A("brcc 5f")                       // No, skip this
-        " add %15,%15" "\n\t"
+        A("add %15,%15")      
-        " adc %16,%16" "\n\t"             // %16:%15 <<= 1
+        A("adc %16,%16")                   // %16:%15 <<= 1
-        " inc %3" "\n\t"                  // idx += 1
+        A("inc %3")                        // idx += 1
 
         // Now %16:%15 contains its MSBit set to 1, or %16:%15 is == 0. We are now absolutely sure
         // we have at least 9 MSBits available to enter the initial estimation table
-        "5:" "\n\t"
+        L("5")
-        " add %15,%15" "\n\t"
+        A("add %15,%15")      
-        " adc %16,%16" "\n\t"             // %16:%15 = tidx = (nr <<= 1), we lose the top MSBit (always set to 1, %16 is the index into the inverse table)
+        A("adc %16,%16")                   // %16:%15 = tidx = (nr <<= 1), we lose the top MSBit (always set to 1, %16 is the index into the inverse table)
-        " add r30,%16" "\n\t"             // Only use top 8 bits
+        A("add r30,%16")                   // Only use top 8 bits
-        " adc r31,%13" "\n\t"             // r31:r30 = inv_tab + (tidx)
+        A("adc r31,%13")                   // r31:r30 = inv_tab + (tidx)
-        " lpm %14, Z" "\n\t"              // %14 = inv_tab[tidx]
+        A("lpm %14, Z")                    // %14 = inv_tab[tidx]
-        " ldi %15, 1" "\n\t"              // %15 = 1  %15:%14 = inv_tab[tidx] + 256
+        A("ldi %15, 1")                    // %15 = 1  %15:%14 = inv_tab[tidx] + 256
 
         // We must scale the approximation to the proper place
-        " clr %16" "\n\t"                 // %16 will always be 0 here
+        A("clr %16")                       // %16 will always be 0 here
-        " subi %3,8" "\n\t"               // idx == 8 ?
+        A("subi %3,8")                     // idx == 8 ?
-        " breq 6f" "\n\t"                 // yes, no need to scale
+        A("breq 6f")                       // yes, no need to scale
-        " brcs 7f" "\n\t"                 // If C=1, means idx < 8, result was negative!
+        A("brcs 7f")                       // If C=1, means idx < 8, result was negative!
 
         // idx > 8, now %3 = idx - 8. We must perform a left shift. idx range:[1-8]
-        " sbrs %3,0" "\n\t"               // shift by 1bit position?
+        A("sbrs %3,0")                     // shift by 1bit position?
-        " rjmp 8f" "\n\t"                 // No
+        A("rjmp 8f")                       // No
-        " add %14,%14" "\n\t"
+        A("add %14,%14")      
-        " adc %15,%15" "\n\t"             // %15:16 <<= 1
+        A("adc %15,%15")                   // %15:16 <<= 1
-        "8:" "\n\t"
+        L("8")
-        " sbrs %3,1" "\n\t"               // shift by 2bit position?
+        A("sbrs %3,1")                     // shift by 2bit position?
-        " rjmp 9f" "\n\t"                 // No
+        A("rjmp 9f")                       // No
-        " add %14,%14" "\n\t"
+        A("add %14,%14")      
-        " adc %15,%15" "\n\t"
+        A("adc %15,%15")      
-        " add %14,%14" "\n\t"
+        A("add %14,%14")      
-        " adc %15,%15" "\n\t"             // %15:16 <<= 1
+        A("adc %15,%15")                   // %15:16 <<= 1
-        "9:" "\n\t"
+        L("9")
-        " sbrs %3,2" "\n\t"               // shift by 4bits position?
+        A("sbrs %3,2")                     // shift by 4bits position?
-        " rjmp 16f" "\n\t"                // No
+        A("rjmp 16f")                      // No
-        " swap %15" "\n\t"                // Swap nibbles. lo nibble of %15 will always be 0
+        A("swap %15")                      // Swap nibbles. lo nibble of %15 will always be 0
-        " swap %14" "\n\t"                // Swap nibbles
+        A("swap %14")                      // Swap nibbles
-        " mov %12,%14" "\n\t"
+        A("mov %12,%14")      
-        " andi %12,0x0f" "\n\t"           // isolate low nibble
+        A("andi %12,0x0F")                 // isolate low nibble
-        " andi %14,0xf0" "\n\t"           // and clear it
+        A("andi %14,0xF0")                 // and clear it
-        " or %15,%12" "\n\t"              // %15:%16 <<= 4
+        A("or %15,%12")                    // %15:%16 <<= 4
-        "16:" "\n\t"
+        L("16")
-        " sbrs %3,3" "\n\t"               // shift by 8bits position?
+        A("sbrs %3,3")                     // shift by 8bits position?
-        " rjmp 6f" "\n\t"                 // No, we are done
+        A("rjmp 6f")                       // No, we are done
-        " mov %16,%15" "\n\t"
+        A("mov %16,%15")      
-        " mov %15,%14" "\n\t"
+        A("mov %15,%14")      
-        " clr %14" "\n\t"
+        A("clr %14")      
-        " jmp 6f" "\n\t"
+        A("jmp 6f")      
 
         // idx < 8, now %3 = idx - 8. Get the count of bits
-        "7:" "\n\t"
+        L("7")
-        " neg %3" "\n\t"                  // %3 = -idx = count of bits to move right. idx range:[1...8]
+        A("neg %3")                        // %3 = -idx = count of bits to move right. idx range:[1...8]
-        " sbrs %3,0" "\n\t"               // shift by 1 bit position ?
+        A("sbrs %3,0")                     // shift by 1 bit position ?
-        " rjmp 10f" "\n\t"                // No, skip it
+        A("rjmp 10f")                      // No, skip it
-        " asr %15" "\n\t"                 // (bit7 is always 0 here)
+        A("asr %15")                       // (bit7 is always 0 here)
-        " ror %14" "\n\t"
+        A("ror %14")      
-        "10:" "\n\t"
+        L("10")
-        " sbrs %3,1" "\n\t"               // shift by 2 bit position ?
+        A("sbrs %3,1")                     // shift by 2 bit position ?
-        " rjmp 11f" "\n\t"                // No, skip it
+        A("rjmp 11f")                      // No, skip it
-        " asr %15" "\n\t"                 // (bit7 is always 0 here)
+        A("asr %15")                       // (bit7 is always 0 here)
-        " ror %14" "\n\t"
+        A("ror %14")      
-        " asr %15" "\n\t"                 // (bit7 is always 0 here)
+        A("asr %15")                       // (bit7 is always 0 here)
-        " ror %14" "\n\t"
+        A("ror %14")      
-        "11:" "\n\t"
+        L("11")
-        " sbrs %3,2" "\n\t"               // shift by 4 bit position ?
+        A("sbrs %3,2")                     // shift by 4 bit position ?
-        " rjmp 12f" "\n\t"                // No, skip it
+        A("rjmp 12f")                      // No, skip it
-        " swap %15" "\n\t"                // Swap nibbles
+        A("swap %15")                      // Swap nibbles
-        " andi %14, 0xf0" "\n\t"          // Lose the lowest nibble
+        A("andi %14, 0xF0")                // Lose the lowest nibble
-        " swap %14" "\n\t"                // Swap nibbles. Upper nibble is 0
+        A("swap %14")                      // Swap nibbles. Upper nibble is 0
-        " or %14,%15" "\n\t"              // Pass nibble from upper byte
+        A("or %14,%15")                    // Pass nibble from upper byte
-        " andi %15, 0x0f" "\n\t"          // And get rid of that nibble
+        A("andi %15, 0x0F")                // And get rid of that nibble
-        "12:" "\n\t"
+        L("12")
-        " sbrs %3,3" "\n\t"               // shift by 8 bit position ?
+        A("sbrs %3,3")                     // shift by 8 bit position ?
-        " rjmp 6f" "\n\t"                 // No, skip it
+        A("rjmp 6f")                       // No, skip it
-        " mov %14,%15" "\n\t"
+        A("mov %14,%15")      
-        " clr %15" "\n\t"
+        A("clr %15")      
-        "6:" "\n\t"                       // %16:%15:%14 = initial estimation of 0x1000000 / d
+        L("6")                       // %16:%15:%14 = initial estimation of 0x1000000 / d
 
         // Now, we must refine the estimation present on %16:%15:%14 using 1 iteration
         // of Newton-Raphson. As it has a quadratic convergence, 1 iteration is enough
@@ -549,36 +549,36 @@ void Planner::init() {
         // %3:%2:%1:%0 = working accumulator
 
         // Compute 1<<25 - x*d. Result should never exceed 25 bits and should always be positive
-        " clr %0" "\n\t"
+        A("clr %0")      
-        " clr %1" "\n\t"
+        A("clr %1")      
-        " clr %2" "\n\t"
+        A("clr %2")      
-        " ldi %3,2" "\n\t"                // %3:%2:%1:%0 = 0x2000000
+        A("ldi %3,2")                      // %3:%2:%1:%0 = 0x2000000
-        " mul %6,%14" "\n\t"              // r1:r0 = LO(d) * LO(x)
+        A("mul %6,%14")                    // r1:r0 = LO(d) * LO(x)
-        " sub %0,r0" "\n\t"
+        A("sub %0,r0")      
-        " sbc %1,r1" "\n\t"
+        A("sbc %1,r1")      
-        " sbc %2,%13" "\n\t"
+        A("sbc %2,%13")      
-        " sbc %3,%13" "\n\t"              // %3:%2:%1:%0 -= LO(d) * LO(x)
+        A("sbc %3,%13")                    // %3:%2:%1:%0 -= LO(d) * LO(x)
-        " mul %7,%14" "\n\t"              // r1:r0 = MI(d) * LO(x)
+        A("mul %7,%14")                    // r1:r0 = MI(d) * LO(x)
-        " sub %1,r0" "\n\t"
+        A("sub %1,r0")      
-        " sbc %2,r1"  "\n\t"
+        A("sbc %2,r1" )      
-        " sbc %3,%13" "\n\t"              // %3:%2:%1:%0 -= MI(d) * LO(x) << 8
+        A("sbc %3,%13")                    // %3:%2:%1:%0 -= MI(d) * LO(x) << 8
-        " mul %8,%14" "\n\t"              // r1:r0 = HI(d) * LO(x)
+        A("mul %8,%14")                    // r1:r0 = HI(d) * LO(x)
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")      
-        " sbc %3,r1" "\n\t"               // %3:%2:%1:%0 -= MIL(d) * LO(x) << 16
+        A("sbc %3,r1")                     // %3:%2:%1:%0 -= MIL(d) * LO(x) << 16
-        " mul %6,%15" "\n\t"              // r1:r0 = LO(d) * MI(x)
+        A("mul %6,%15")                    // r1:r0 = LO(d) * MI(x)
-        " sub %1,r0" "\n\t"
+        A("sub %1,r0")      
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")      
-        " sbc %3,%13" "\n\t"              // %3:%2:%1:%0 -= LO(d) * MI(x) << 8
+        A("sbc %3,%13")                    // %3:%2:%1:%0 -= LO(d) * MI(x) << 8
-        " mul %7,%15" "\n\t"              // r1:r0 = MI(d) * MI(x)
+        A("mul %7,%15")                    // r1:r0 = MI(d) * MI(x)
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")      
-        " sbc %3,r1" "\n\t"               // %3:%2:%1:%0 -= MI(d) * MI(x) << 16
+        A("sbc %3,r1")                     // %3:%2:%1:%0 -= MI(d) * MI(x) << 16
-        " mul %8,%15" "\n\t"              // r1:r0 = HI(d) * MI(x)
+        A("mul %8,%15")                    // r1:r0 = HI(d) * MI(x)
-        " sub %3,r0" "\n\t"               // %3:%2:%1:%0 -= MIL(d) * MI(x) << 24
+        A("sub %3,r0")                     // %3:%2:%1:%0 -= MIL(d) * MI(x) << 24
-        " mul %6,%16" "\n\t"              // r1:r0 = LO(d) * HI(x)
+        A("mul %6,%16")                    // r1:r0 = LO(d) * HI(x)
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")      
-        " sbc %3,r1" "\n\t"               // %3:%2:%1:%0 -= LO(d) * HI(x) << 16
+        A("sbc %3,r1")                     // %3:%2:%1:%0 -= LO(d) * HI(x) << 16
-        " mul %7,%16" "\n\t"              // r1:r0 = MI(d) * HI(x)
+        A("mul %7,%16")                    // r1:r0 = MI(d) * HI(x)
-        " sub %3,r0" "\n\t"               // %3:%2:%1:%0 -= MI(d) * HI(x) << 24
+        A("sub %3,r0")                     // %3:%2:%1:%0 -= MI(d) * HI(x) << 24
         // %3:%2:%1:%0 = (1<<25) - x*d     [169]
 
         // We need to multiply that result by x, and we are only interested in the top 24bits of that multiply
@@ -588,62 +588,62 @@ void Planner::init() {
         // %13 = 0
 
         // result = %11:%10:%9:%5:%4
-        " mul %14,%0" "\n\t"              // r1:r0 = LO(x) * LO(acc)
+        A("mul %14,%0")                    // r1:r0 = LO(x) * LO(acc)
-        " mov %4,r1" "\n\t"
+        A("mov %4,r1")      
-        " clr %5" "\n\t"
+        A("clr %5")      
-        " clr %9" "\n\t"
+        A("clr %9")      
-        " clr %10" "\n\t"
+        A("clr %10")      
-        " clr %11" "\n\t"                 // %11:%10:%9:%5:%4 = LO(x) * LO(acc) >> 8
+        A("clr %11")                       // %11:%10:%9:%5:%4 = LO(x) * LO(acc) >> 8
-        " mul %15,%0" "\n\t"              // r1:r0 = MI(x) * LO(acc)
+        A("mul %15,%0")                    // r1:r0 = MI(x) * LO(acc)
-        " add %4,r0" "\n\t"
+        A("add %4,r0")      
-        " adc %5,r1" "\n\t"
+        A("adc %5,r1")      
-        " adc %9,%13" "\n\t"
+        A("adc %9,%13")      
-        " adc %10,%13" "\n\t"
+        A("adc %10,%13")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 += MI(x) * LO(acc)
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 += MI(x) * LO(acc)
-        " mul %16,%0" "\n\t"              // r1:r0 = HI(x) * LO(acc)
+        A("mul %16,%0")                    // r1:r0 = HI(x) * LO(acc)
-        " add %5,r0" "\n\t"
+        A("add %5,r0")      
-        " adc %9,r1" "\n\t"
+        A("adc %9,r1")      
-        " adc %10,%13" "\n\t"
+        A("adc %10,%13")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 += MI(x) * LO(acc) << 8
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 += MI(x) * LO(acc) << 8
 
-        " mul %14,%1" "\n\t"              // r1:r0 = LO(x) * MIL(acc)
+        A("mul %14,%1")                    // r1:r0 = LO(x) * MIL(acc)
-        " add %4,r0" "\n\t"
+        A("add %4,r0")      
-        " adc %5,r1" "\n\t"
+        A("adc %5,r1")      
-        " adc %9,%13" "\n\t"
+        A("adc %9,%13")      
-        " adc %10,%13" "\n\t"
+        A("adc %10,%13")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 = LO(x) * MIL(acc)
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 = LO(x) * MIL(acc)
-        " mul %15,%1" "\n\t"              // r1:r0 = MI(x) * MIL(acc)
+        A("mul %15,%1")                    // r1:r0 = MI(x) * MIL(acc)
-        " add %5,r0" "\n\t"
+        A("add %5,r0")      
-        " adc %9,r1" "\n\t"
+        A("adc %9,r1")      
-        " adc %10,%13" "\n\t"
+        A("adc %10,%13")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 8
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 8
-        " mul %16,%1" "\n\t"              // r1:r0 = HI(x) * MIL(acc)
+        A("mul %16,%1")                    // r1:r0 = HI(x) * MIL(acc)
-        " add %9,r0" "\n\t"
+        A("add %9,r0")      
-        " adc %10,r1" "\n\t"
+        A("adc %10,r1")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 16
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 += MI(x) * MIL(acc) << 16
 
-        " mul %14,%2" "\n\t"              // r1:r0 = LO(x) * MIH(acc)
+        A("mul %14,%2")                    // r1:r0 = LO(x) * MIH(acc)
-        " add %5,r0" "\n\t"
+        A("add %5,r0")      
-        " adc %9,r1" "\n\t"
+        A("adc %9,r1")      
-        " adc %10,%13" "\n\t"
+        A("adc %10,%13")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 = LO(x) * MIH(acc) << 8
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 = LO(x) * MIH(acc) << 8
-        " mul %15,%2" "\n\t"              // r1:r0 = MI(x) * MIH(acc)
+        A("mul %15,%2")                    // r1:r0 = MI(x) * MIH(acc)
-        " add %9,r0" "\n\t"
+        A("add %9,r0")      
-        " adc %10,r1" "\n\t"
+        A("adc %10,r1")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 16
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 16
-        " mul %16,%2" "\n\t"              // r1:r0 = HI(x) * MIH(acc)
+        A("mul %16,%2")                    // r1:r0 = HI(x) * MIH(acc)
-        " add %10,r0" "\n\t"
+        A("add %10,r0")      
-        " adc %11,r1" "\n\t"              // %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 24
+        A("adc %11,r1")                    // %11:%10:%9:%5:%4 += MI(x) * MIH(acc) << 24
 
-        " mul %14,%3" "\n\t"              // r1:r0 = LO(x) * HI(acc)
+        A("mul %14,%3")                    // r1:r0 = LO(x) * HI(acc)
-        " add %9,r0" "\n\t"
+        A("add %9,r0")      
-        " adc %10,r1" "\n\t"
+        A("adc %10,r1")      
-        " adc %11,%13" "\n\t"             // %11:%10:%9:%5:%4 = LO(x) * HI(acc) << 16
+        A("adc %11,%13")                   // %11:%10:%9:%5:%4 = LO(x) * HI(acc) << 16
-        " mul %15,%3" "\n\t"              // r1:r0 = MI(x) * HI(acc)
+        A("mul %15,%3")                    // r1:r0 = MI(x) * HI(acc)
-        " add %10,r0" "\n\t"
+        A("add %10,r0")      
-        " adc %11,r1" "\n\t"              // %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 24
+        A("adc %11,r1")                    // %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 24
-        " mul %16,%3" "\n\t"              // r1:r0 = HI(x) * HI(acc)
+        A("mul %16,%3")                    // r1:r0 = HI(x) * HI(acc)
-        " add %11,r0" "\n\t"              // %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 32
+        A("add %11,r0")                    // %11:%10:%9:%5:%4 += MI(x) * HI(acc) << 32
 
         // At this point, %11:%10:%9 contains the new estimation of x.
 
@@ -651,54 +651,54 @@ void Planner::init() {
         // (1<<24) - x*d
         // %11:%10:%9 = x
         // %8:%7:%6 = d = interval" "\n\t"
-        " ldi %3,1" "\n\t"
+        A("ldi %3,1")      
-        " clr %2" "\n\t"
+        A("clr %2")      
-        " clr %1" "\n\t"
+        A("clr %1")      
-        " clr %0" "\n\t"                  // %3:%2:%1:%0 = 0x1000000
+        A("clr %0")                        // %3:%2:%1:%0 = 0x1000000
-        " mul %6,%9" "\n\t"               // r1:r0 = LO(d) * LO(x)
+        A("mul %6,%9")                     // r1:r0 = LO(d) * LO(x)
-        " sub %0,r0" "\n\t"
+        A("sub %0,r0")      
-        " sbc %1,r1" "\n\t"
+        A("sbc %1,r1")      
-        " sbc %2,%13" "\n\t"
+        A("sbc %2,%13")      
-        " sbc %3,%13" "\n\t"              // %3:%2:%1:%0 -= LO(d) * LO(x)
+        A("sbc %3,%13")                    // %3:%2:%1:%0 -= LO(d) * LO(x)
-        " mul %7,%9" "\n\t"               // r1:r0 = MI(d) * LO(x)
+        A("mul %7,%9")                     // r1:r0 = MI(d) * LO(x)
-        " sub %1,r0" "\n\t"
+        A("sub %1,r0")      
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")      
-        " sbc %3,%13" "\n\t"              // %3:%2:%1:%0 -= MI(d) * LO(x) << 8
+        A("sbc %3,%13")                    // %3:%2:%1:%0 -= MI(d) * LO(x) << 8
-        " mul %8,%9" "\n\t"               // r1:r0 = HI(d) * LO(x)
+        A("mul %8,%9")                     // r1:r0 = HI(d) * LO(x)
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")      
-        " sbc %3,r1" "\n\t"               // %3:%2:%1:%0 -= MIL(d) * LO(x) << 16
+        A("sbc %3,r1")                     // %3:%2:%1:%0 -= MIL(d) * LO(x) << 16
-        " mul %6,%10" "\n\t"              // r1:r0 = LO(d) * MI(x)
+        A("mul %6,%10")                    // r1:r0 = LO(d) * MI(x)
-        " sub %1,r0" "\n\t"
+        A("sub %1,r0")      
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")      
-        " sbc %3,%13" "\n\t"              // %3:%2:%1:%0 -= LO(d) * MI(x) << 8
+        A("sbc %3,%13")                    // %3:%2:%1:%0 -= LO(d) * MI(x) << 8
-        " mul %7,%10" "\n\t"              // r1:r0 = MI(d) * MI(x)
+        A("mul %7,%10")                    // r1:r0 = MI(d) * MI(x)
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")      
-        " sbc %3,r1" "\n\t"               // %3:%2:%1:%0 -= MI(d) * MI(x) << 16
+        A("sbc %3,r1")                     // %3:%2:%1:%0 -= MI(d) * MI(x) << 16
-        " mul %8,%10" "\n\t"              // r1:r0 = HI(d) * MI(x)
+        A("mul %8,%10")                    // r1:r0 = HI(d) * MI(x)
-        " sub %3,r0" "\n\t"               // %3:%2:%1:%0 -= MIL(d) * MI(x) << 24
+        A("sub %3,r0")                     // %3:%2:%1:%0 -= MIL(d) * MI(x) << 24
-        " mul %6,%11" "\n\t"              // r1:r0 = LO(d) * HI(x)
+        A("mul %6,%11")                    // r1:r0 = LO(d) * HI(x)
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")      
-        " sbc %3,r1" "\n\t"               // %3:%2:%1:%0 -= LO(d) * HI(x) << 16
+        A("sbc %3,r1")                     // %3:%2:%1:%0 -= LO(d) * HI(x) << 16
-        " mul %7,%11" "\n\t"              // r1:r0 = MI(d) * HI(x)
+        A("mul %7,%11")                    // r1:r0 = MI(d) * HI(x)
-        " sub %3,r0" "\n\t"               // %3:%2:%1:%0 -= MI(d) * HI(x) << 24
+        A("sub %3,r0")                     // %3:%2:%1:%0 -= MI(d) * HI(x) << 24
         // %3:%2:%1:%0 = r = (1<<24) - x*d
         // %8:%7:%6 = d = interval
 
         // Perform the final correction
-        " sub %0,%6" "\n\t"
+        A("sub %0,%6")      
-        " sbc %1,%7" "\n\t"
+        A("sbc %1,%7")      
-        " sbc %2,%8" "\n\t"               // r -= d
+        A("sbc %2,%8")                     // r -= d
-        " brcs 14f" "\n\t"                // if ( r >= d)
+        A("brcs 14f")                      // if ( r >= d)
 
         // %11:%10:%9 = x
-        " ldi %3,1" "\n\t"
+        A("ldi %3,1")      
-        " add %9,%3" "\n\t"
+        A("add %9,%3")      
-        " adc %10,%13" "\n\t"
+        A("adc %10,%13")      
-        " adc %11,%13" "\n\t"             // x++
+        A("adc %11,%13")                   // x++
-        "14:" "\n\t"
+        L("14")
 
         // Estimation is done. %11:%10:%9 = x
-        " clr __zero_reg__" "\n\t"        // Make C runtime happy
+        A("clr __zero_reg__")              // Make C runtime happy
         // [211 cycles total]
         : "=r" (r2),
           "=r" (r3),
@@ -787,8 +787,8 @@ void Planner::calculate_trapezoid_for_block(block_t* const block, const float &e
 
   #if ENABLED(BEZIER_JERK_CONTROL)
     // Jerk controlled speed requires to express speed versus time, NOT steps
-    uint32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * HAL_STEPPER_TIMER_RATE,
+    uint32_t acceleration_time = ((float)(cruise_rate - initial_rate) / accel) * (HAL_STEPPER_TIMER_RATE),
-             deceleration_time = ((float)(cruise_rate - final_rate) / accel) * HAL_STEPPER_TIMER_RATE;
+             deceleration_time = ((float)(cruise_rate - final_rate) / accel) * (HAL_STEPPER_TIMER_RATE);
 
     // And to offload calculations from the ISR, we also calculate the inverse of those times here
     uint32_t acceleration_time_inverse = get_period_inverse(acceleration_time);
@@ -1864,57 +1864,86 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE]
     }
   #endif
 
-  // Initial limit on the segment entry velocity
+  float vmax_junction; // Initial limit on the segment entry velocity
-  float vmax_junction;
 
-  #if 0  // Use old jerk for now
+  #if ENABLED(JUNCTION_DEVIATION)
 
-    float junction_deviation = 0.1;
+    /**
+     * Compute maximum allowable entry speed at junction by centripetal acceleration approximation.
+     * Let a circle be tangent to both previous and current path line segments, where the junction 
+     * deviation is defined as the distance from the junction to the closest edge of the circle, 
+     * colinear with the circle center. The circular segment joining the two paths represents the 
+     * path of centripetal acceleration. Solve for max velocity based on max acceleration about the
+     * radius of the circle, defined indirectly by junction deviation. This may be also viewed as 
+     * path width or max_jerk in the previous Grbl version. This approach does not actually deviate 
+     * from path, but used as a robust way to compute cornering speeds, as it takes into account the
+     * nonlinearities of both the junction angle and junction velocity.
+     *
+     * NOTE: If the junction deviation value is finite, Grbl executes the motions in an exact path 
+     * mode (G61). If the junction deviation value is zero, Grbl will execute the motion in an exact
+     * stop mode (G61.1) manner. In the future, if continuous mode (G64) is desired, the math here
+     * is exactly the same. Instead of motioning all the way to junction point, the machine will
+     * just follow the arc circle defined here. The Arduino doesn't have the CPU cycles to perform
+     * a continuous mode path, but ARM-based microcontrollers most certainly do. 
+     * 
+     * NOTE: The max junction speed is a fixed value, since machine acceleration limits cannot be
+     * changed dynamically during operation nor can the line move geometry. This must be kept in
+     * memory in the event of a feedrate override changing the nominal speeds of blocks, which can 
+     * change the overall maximum entry speed conditions of all blocks.
+     */
 
-    // Compute path unit vector
+    // Unit vector of previous path line segment
-    double unit_vec[XYZ] = {
+    static float previous_unit_vec[
+      #if ENABLED(JUNCTION_DEVIATION_INCLUDE_E)
+        XYZE
+      #else
+        XYZ
+      #endif
+    ];
+
+    float unit_vec[] = {
       delta_mm[A_AXIS] * inverse_millimeters,
       delta_mm[B_AXIS] * inverse_millimeters,
       delta_mm[C_AXIS] * inverse_millimeters
+      #if ENABLED(JUNCTION_DEVIATION_INCLUDE_E)
+        , delta_mm[E_AXIS] * inverse_millimeters
+      #endif
     };
 
-    /*
-       Compute maximum allowable entry speed at junction by centripetal acceleration approximation.
-
-       Let a circle be tangent to both previous and current path line segments, where the junction
-       deviation is defined as the distance from the junction to the closest edge of the circle,
-       collinear with the circle center.
-
-       The circular segment joining the two paths represents the path of centripetal acceleration.
-       Solve for max velocity based on max acceleration about the radius of the circle, defined
-       indirectly by junction deviation.
-
-       This may be also viewed as path width or max_jerk in the previous grbl version. This approach
-       does not actually deviate from path, but used as a robust way to compute cornering speeds, as
-       it takes into account the nonlinearities of both the junction angle and junction velocity.
-     */
-
-    vmax_junction = MINIMUM_PLANNER_SPEED; // Set default max junction speed
-
     // Skip first block or when previous_nominal_speed is used as a flag for homing and offset cycles.
     if (moves_queued && !UNEAR_ZERO(previous_nominal_speed)) {
       // Compute cosine of angle between previous and current path. (prev_unit_vec is negative)
       // NOTE: Max junction velocity is computed without sin() or acos() by trig half angle identity.
-      const float cos_theta = - previous_unit_vec[X_AXIS] * unit_vec[X_AXIS]
+      float junction_cos_theta = -previous_unit_vec[X_AXIS] * unit_vec[X_AXIS]
-                              - previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS]
+                                 -previous_unit_vec[Y_AXIS] * unit_vec[Y_AXIS]
-                              - previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS];
+                                 -previous_unit_vec[Z_AXIS] * unit_vec[Z_AXIS]
-      // Skip and use default max junction speed for 0 degree acute junction.
+                                  #if ENABLED(JUNCTION_DEVIATION_INCLUDE_E)
-      if (cos_theta < 0.95) {
+                                    -previous_unit_vec[E_AXIS] * unit_vec[E_AXIS]
-        vmax_junction = min(previous_nominal_speed, block->nominal_speed);
-        // Skip and avoid divide by zero for straight junctions at 180 degrees. Limit to min() of nominal speeds.
-        if (cos_theta > -0.95) {
-          // Compute maximum junction velocity based on maximum acceleration and junction deviation
-          float sin_theta_d2 = SQRT(0.5 * (1.0 - cos_theta)); // Trig half angle identity. Always positive.
-          NOMORE(vmax_junction, SQRT(block->acceleration * junction_deviation * sin_theta_d2 / (1.0 - sin_theta_d2)));
-        }
-      }
-    }
                                   #endif
+                                ;
+
+      // NOTE: Computed without any expensive trig, sin() or acos(), by trig half angle identity of cos(theta).
+      if (junction_cos_theta > 0.999999) {
+        // For a 0 degree acute junction, just set minimum junction speed.
+        vmax_junction = MINIMUM_PLANNER_SPEED;
+      }
+      else {
+        junction_cos_theta = max(junction_cos_theta, -0.999999); // Check for numerical round-off to avoid divide by zero.
+        const float sin_theta_d2 = SQRT(0.5 * (1.0 - junction_cos_theta)); // Trig half angle identity. Always positive.
+
+        // TODO: Technically, the acceleration used in calculation needs to be limited by the minimum of the
+        // two junctions. However, this shouldn't be a significant problem except in extreme circumstances.
+        vmax_junction = SQRT((block->acceleration * JUNCTION_DEVIATION_FACTOR * sin_theta_d2) / (1.0 - sin_theta_d2));
+      }
+
+      vmax_junction = MIN3(vmax_junction, block->nominal_speed, previous_nominal_speed);
+    }
+    else // Init entry speed to zero. Assume it starts from rest. Planner will correct this later.
+      vmax_junction = 0.0;
+
+    COPY(previous_unit_vec, unit_vec);
+
+  #else // Classic Jerk Limiting
 
     /**
      * Adapted from Průša MKS firmware
@@ -1988,6 +2017,9 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE]
     else
       vmax_junction = safe_speed;
   
+    previous_safe_speed = safe_speed;
+  #endif // Classic Jerk Limiting
+
   // Max entry speed of this block equals the max exit speed of the previous block.
   block->max_entry_speed = vmax_junction;
 
@@ -2010,7 +2042,6 @@ void Planner::_buffer_steps(const int32_t (&target)[XYZE]
   // Update previous path unit_vector and nominal speed
   COPY(previous_speed, current_speed);
   previous_nominal_speed = block->nominal_speed;
-  previous_safe_speed = safe_speed;
 
   // Move buffer head
   block_buffer_head = next_buffer_head;

Marlin/src/module/stepper.cpp

@@ -581,68 +581,68 @@ void Stepper::set_directions() {
         /*  %10 (must be high register!)*/
 
         /* Store initial velocity*/
-        " sts bezier_F, %0" "\n\t"
+        A("sts bezier_F, %0")
-        " sts bezier_F+1, %1" "\n\t"
+        A("sts bezier_F+1, %1")
-        " sts bezier_F+2, %10" "\n\t"    /* bezier_F = %10:%1:%0 = v0 */
+        A("sts bezier_F+2, %10")    /* bezier_F = %10:%1:%0 = v0 */
 
         /* Get delta speed */
-        " ldi %2,-1" "\n\t"              /* %2 = 0xff, means A_negative = true */
+        A("ldi %2,-1")              /* %2 = 0xFF, means A_negative = true */
-        " clr %8" "\n\t"                 /* %8 = 0 */
+        A("clr %8")                 /* %8 = 0 */
-        " sub %0,%3" "\n\t"
+        A("sub %0,%3")
-        " sbc %1,%4" "\n\t"
+        A("sbc %1,%4")
-        " sbc %10,%5" "\n\t"             /*  v0 -= v1, C=1 if result is negative */
+        A("sbc %10,%5")             /*  v0 -= v1, C=1 if result is negative */
-        " brcc 1f" "\n\t"                /* branch if result is positive (C=0), that means v0 >= v1 */
+        A("brcc 1f")                /* branch if result is positive (C=0), that means v0 >= v1 */
 
         /*  Result was negative, get the absolute value*/
-        " com %10" "\n\t"
+        A("com %10")
-        " com %1" "\n\t"
+        A("com %1")
-        " neg %0" "\n\t"
+        A("neg %0")
-        " sbc %1,%2" "\n\t"
+        A("sbc %1,%2")
-        " sbc %10,%2" "\n\t"             /* %10:%1:%0 +1  -> %10:%1:%0 = -(v0 - v1) = (v1 - v0) */
+        A("sbc %10,%2")             /* %10:%1:%0 +1  -> %10:%1:%0 = -(v0 - v1) = (v1 - v0) */
-        " clr %2" "\n\t"                 /* %2 = 0, means A_negative = false */
+        A("clr %2")                 /* %2 = 0, means A_negative = false */
 
         /*  Store negative flag*/
-        "1:" "\n\t"
+        L("1")
-        " sts A_negative, %2" "\n\t"     /* Store negative flag */
+        A("sts A_negative, %2")     /* Store negative flag */
 
         /*  Compute coefficients A,B and C   [20 cycles worst case]*/
-        " ldi %9,6" "\n\t"               /* %9 = 6 */
+        A("ldi %9,6")               /* %9 = 6 */
-        " mul %0,%9" "\n\t"              /* r1:r0 = 6*LO(v0-v1) */
+        A("mul %0,%9")              /* r1:r0 = 6*LO(v0-v1) */
-        " sts bezier_A, r0" "\n\t"
+        A("sts bezier_A, r0")
-        " mov %6,r1" "\n\t"
+        A("mov %6,r1")
-        " clr %7" "\n\t"                 /* %7:%6:r0 = 6*LO(v0-v1) */
+        A("clr %7")                 /* %7:%6:r0 = 6*LO(v0-v1) */
-        " mul %1,%9" "\n\t"              /* r1:r0 = 6*MI(v0-v1) */
+        A("mul %1,%9")              /* r1:r0 = 6*MI(v0-v1) */
-        " add %6,r0" "\n\t"
+        A("add %6,r0")
-        " adc %7,r1" "\n\t"              /* %7:%6:?? += 6*MI(v0-v1) << 8 */
+        A("adc %7,r1")              /* %7:%6:?? += 6*MI(v0-v1) << 8 */
-        " mul %10,%9" "\n\t"             /* r1:r0 = 6*HI(v0-v1) */
+        A("mul %10,%9")             /* r1:r0 = 6*HI(v0-v1) */
-        " add %7,r0" "\n\t"              /* %7:%6:?? += 6*HI(v0-v1) << 16 */
+        A("add %7,r0")              /* %7:%6:?? += 6*HI(v0-v1) << 16 */
-        " sts bezier_A+1, %6" "\n\t"
+        A("sts bezier_A+1, %6")
-        " sts bezier_A+2, %7" "\n\t"     /* bezier_A = %7:%6:?? = 6*(v0-v1) [35 cycles worst] */
+        A("sts bezier_A+2, %7")     /* bezier_A = %7:%6:?? = 6*(v0-v1) [35 cycles worst] */
 
-        " ldi %9,15" "\n\t"              /* %9 = 15 */
+        A("ldi %9,15")              /* %9 = 15 */
-        " mul %0,%9" "\n\t"              /* r1:r0 = 5*LO(v0-v1) */
+        A("mul %0,%9")              /* r1:r0 = 5*LO(v0-v1) */
-        " sts bezier_B, r0" "\n\t"
+        A("sts bezier_B, r0")
-        " mov %6,r1" "\n\t"
+        A("mov %6,r1")
-        " clr %7" "\n\t"                 /* %7:%6:?? = 5*LO(v0-v1) */
+        A("clr %7")                 /* %7:%6:?? = 5*LO(v0-v1) */
-        " mul %1,%9" "\n\t"              /* r1:r0 = 5*MI(v0-v1) */
+        A("mul %1,%9")              /* r1:r0 = 5*MI(v0-v1) */
-        " add %6,r0" "\n\t"
+        A("add %6,r0")
-        " adc %7,r1" "\n\t"              /* %7:%6:?? += 5*MI(v0-v1) << 8 */
+        A("adc %7,r1")              /* %7:%6:?? += 5*MI(v0-v1) << 8 */
-        " mul %10,%9" "\n\t"             /* r1:r0 = 5*HI(v0-v1) */
+        A("mul %10,%9")             /* r1:r0 = 5*HI(v0-v1) */
-        " add %7,r0" "\n\t"              /* %7:%6:?? += 5*HI(v0-v1) << 16 */
+        A("add %7,r0")              /* %7:%6:?? += 5*HI(v0-v1) << 16 */
-        " sts bezier_B+1, %6" "\n\t"
+        A("sts bezier_B+1, %6")
-        " sts bezier_B+2, %7" "\n\t"     /* bezier_B = %7:%6:?? = 5*(v0-v1) [50 cycles worst] */
+        A("sts bezier_B+2, %7")     /* bezier_B = %7:%6:?? = 5*(v0-v1) [50 cycles worst] */
 
-        " ldi %9,10" "\n\t"              /* %9 = 10 */
+        A("ldi %9,10")              /* %9 = 10 */
-        " mul %0,%9" "\n\t"              /* r1:r0 = 10*LO(v0-v1) */
+        A("mul %0,%9")              /* r1:r0 = 10*LO(v0-v1) */
-        " sts bezier_C, r0" "\n\t"
+        A("sts bezier_C, r0")
-        " mov %6,r1" "\n\t"
+        A("mov %6,r1")
-        " clr %7" "\n\t"                 /* %7:%6:?? = 10*LO(v0-v1) */
+        A("clr %7")                 /* %7:%6:?? = 10*LO(v0-v1) */
-        " mul %1,%9" "\n\t"              /* r1:r0 = 10*MI(v0-v1) */
+        A("mul %1,%9")              /* r1:r0 = 10*MI(v0-v1) */
-        " add %6,r0" "\n\t"
+        A("add %6,r0")
-        " adc %7,r1" "\n\t"              /* %7:%6:?? += 10*MI(v0-v1) << 8 */
+        A("adc %7,r1")              /* %7:%6:?? += 10*MI(v0-v1) << 8 */
-        " mul %10,%9" "\n\t"             /* r1:r0 = 10*HI(v0-v1) */
+        A("mul %10,%9")             /* r1:r0 = 10*HI(v0-v1) */
-        " add %7,r0" "\n\t"              /* %7:%6:?? += 10*HI(v0-v1) << 16 */
+        A("add %7,r0")              /* %7:%6:?? += 10*HI(v0-v1) << 16 */
-        " sts bezier_C+1, %6" "\n\t"
+        A("sts bezier_C+1, %6")
         " sts bezier_C+2, %7"            /* bezier_C = %7:%6:?? = 10*(v0-v1) [65 cycles worst] */
         : "+r" (r2),
           "+d" (r3),
@@ -674,358 +674,358 @@ void Stepper::set_directions() {
 
       __asm__ __volatile(
         /* umul24x24to16hi(t, bezier_AV, curr_step);  t: Range 0 - 1^16 = 16 bits*/
-        " lds %9,bezier_AV" "\n\t"       /* %9 = LO(AV)*/
+        A("lds %9,bezier_AV")       /* %9 = LO(AV)*/
-        " mul %9,%2" "\n\t"              /* r1:r0 = LO(bezier_AV)*LO(curr_step)*/
+        A("mul %9,%2")              /* r1:r0 = LO(bezier_AV)*LO(curr_step)*/
-        " mov %7,r1" "\n\t"              /* %7 = LO(bezier_AV)*LO(curr_step) >> 8*/
+        A("mov %7,r1")              /* %7 = LO(bezier_AV)*LO(curr_step) >> 8*/
-        " clr %8" "\n\t"                 /* %8:%7  = LO(bezier_AV)*LO(curr_step) >> 8*/
+        A("clr %8")                 /* %8:%7  = LO(bezier_AV)*LO(curr_step) >> 8*/
-        " lds %10,bezier_AV+1" "\n\t"    /* %10 = MI(AV)*/
+        A("lds %10,bezier_AV+1")    /* %10 = MI(AV)*/
-        " mul %10,%2" "\n\t"             /* r1:r0  = MI(bezier_AV)*LO(curr_step)*/
+        A("mul %10,%2")             /* r1:r0  = MI(bezier_AV)*LO(curr_step)*/
-        " add %7,r0" "\n\t"
+        A("add %7,r0")
-        " adc %8,r1" "\n\t"              /* %8:%7 += MI(bezier_AV)*LO(curr_step)*/
+        A("adc %8,r1")              /* %8:%7 += MI(bezier_AV)*LO(curr_step)*/
-        " lds r1,bezier_AV+2" "\n\t"     /* r11 = HI(AV)*/
+        A("lds r1,bezier_AV+2")     /* r11 = HI(AV)*/
-        " mul r1,%2" "\n\t"              /* r1:r0  = HI(bezier_AV)*LO(curr_step)*/
+        A("mul r1,%2")              /* r1:r0  = HI(bezier_AV)*LO(curr_step)*/
-        " add %8,r0" "\n\t"              /* %8:%7 += HI(bezier_AV)*LO(curr_step) << 8*/
+        A("add %8,r0")              /* %8:%7 += HI(bezier_AV)*LO(curr_step) << 8*/
-        " mul %9,%3" "\n\t"              /* r1:r0 =  LO(bezier_AV)*MI(curr_step)*/
+        A("mul %9,%3")              /* r1:r0 =  LO(bezier_AV)*MI(curr_step)*/
-        " add %7,r0" "\n\t"
+        A("add %7,r0")
-        " adc %8,r1" "\n\t"              /* %8:%7 += LO(bezier_AV)*MI(curr_step)*/
+        A("adc %8,r1")              /* %8:%7 += LO(bezier_AV)*MI(curr_step)*/
-        " mul %10,%3" "\n\t"             /* r1:r0 =  MI(bezier_AV)*MI(curr_step)*/
+        A("mul %10,%3")             /* r1:r0 =  MI(bezier_AV)*MI(curr_step)*/
-        " add %8,r0" "\n\t"              /* %8:%7 += LO(bezier_AV)*MI(curr_step) << 8*/
+        A("add %8,r0")              /* %8:%7 += LO(bezier_AV)*MI(curr_step) << 8*/
-        " mul %9,%4" "\n\t"              /* r1:r0 =  LO(bezier_AV)*HI(curr_step)*/
+        A("mul %9,%4")              /* r1:r0 =  LO(bezier_AV)*HI(curr_step)*/
-        " add %8,r0" "\n\t"              /* %8:%7 += LO(bezier_AV)*HI(curr_step) << 8*/
+        A("add %8,r0")              /* %8:%7 += LO(bezier_AV)*HI(curr_step) << 8*/
         /* %8:%7 = t*/
 
         /* uint16_t f = t;*/
-        " mov %5,%7" "\n\t"              /* %6:%5 = f*/
+        A("mov %5,%7")              /* %6:%5 = f*/
-        " mov %6,%8" "\n\t"
+        A("mov %6,%8")
         /* %6:%5 = f*/
 
         /* umul16x16to16hi(f, f, t); / Range 16 bits (unsigned) [17] */
-        " mul %5,%7" "\n\t"              /* r1:r0 = LO(f) * LO(t)*/
+        A("mul %5,%7")              /* r1:r0 = LO(f) * LO(t)*/
-        " mov %9,r1" "\n\t"              /* store MIL(LO(f) * LO(t)) in %9, we need it for rounding*/
+        A("mov %9,r1")              /* store MIL(LO(f) * LO(t)) in %9, we need it for rounding*/
-        " clr %10" "\n\t"                /* %10 = 0*/
+        A("clr %10")                /* %10 = 0*/
-        " clr %11" "\n\t"                /* %11 = 0*/
+        A("clr %11")                /* %11 = 0*/
-        " mul %5,%8" "\n\t"              /* r1:r0 = LO(f) * HI(t)*/
+        A("mul %5,%8")              /* r1:r0 = LO(f) * HI(t)*/
-        " add %9,r0" "\n\t"              /* %9 += LO(LO(f) * HI(t))*/
+        A("add %9,r0")              /* %9 += LO(LO(f) * HI(t))*/
-        " adc %10,r1" "\n\t"             /* %10 = HI(LO(f) * HI(t))*/
+        A("adc %10,r1")             /* %10 = HI(LO(f) * HI(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%7" "\n\t"              /* r1:r0 = HI(f) * LO(t)*/
+        A("mul %6,%7")              /* r1:r0 = HI(f) * LO(t)*/
-        " add %9,r0" "\n\t"              /* %9 += LO(HI(f) * LO(t))*/
+        A("add %9,r0")              /* %9 += LO(HI(f) * LO(t))*/
-        " adc %10,r1" "\n\t"             /* %10 += HI(HI(f) * LO(t)) */
+        A("adc %10,r1")             /* %10 += HI(HI(f) * LO(t)) */
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%8" "\n\t"              /* r1:r0 = HI(f) * HI(t)*/
+        A("mul %6,%8")              /* r1:r0 = HI(f) * HI(t)*/
-        " add %10,r0" "\n\t"             /* %10 += LO(HI(f) * HI(t))*/
+        A("add %10,r0")             /* %10 += LO(HI(f) * HI(t))*/
-        " adc %11,r1" "\n\t"             /* %11 += HI(HI(f) * HI(t))*/
+        A("adc %11,r1")             /* %11 += HI(HI(f) * HI(t))*/
-        " mov %5,%10" "\n\t"             /* %6:%5 = */
+        A("mov %5,%10")             /* %6:%5 = */
-        " mov %6,%11" "\n\t"             /* f = %10:%11*/
+        A("mov %6,%11")             /* f = %10:%11*/
 
         /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3  (unsigned) [17]*/
-        " mul %5,%7" "\n\t"              /* r1:r0 = LO(f) * LO(t)*/
+        A("mul %5,%7")              /* r1:r0 = LO(f) * LO(t)*/
-        " mov %1,r1" "\n\t"              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
+        A("mov %1,r1")              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
-        " clr %10" "\n\t"                /* %10 = 0*/
+        A("clr %10")                /* %10 = 0*/
-        " clr %11" "\n\t"                /* %11 = 0*/
+        A("clr %11")                /* %11 = 0*/
-        " mul %5,%8" "\n\t"              /* r1:r0 = LO(f) * HI(t)*/
+        A("mul %5,%8")              /* r1:r0 = LO(f) * HI(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(LO(f) * HI(t))*/
+        A("add %1,r0")              /* %1 += LO(LO(f) * HI(t))*/
-        " adc %10,r1" "\n\t"             /* %10 = HI(LO(f) * HI(t))*/
+        A("adc %10,r1")             /* %10 = HI(LO(f) * HI(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%7" "\n\t"              /* r1:r0 = HI(f) * LO(t)*/
+        A("mul %6,%7")              /* r1:r0 = HI(f) * LO(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(HI(f) * LO(t))*/
+        A("add %1,r0")              /* %1 += LO(HI(f) * LO(t))*/
-        " adc %10,r1" "\n\t"             /* %10 += HI(HI(f) * LO(t))*/
+        A("adc %10,r1")             /* %10 += HI(HI(f) * LO(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%8" "\n\t"              /* r1:r0 = HI(f) * HI(t)*/
+        A("mul %6,%8")              /* r1:r0 = HI(f) * HI(t)*/
-        " add %10,r0" "\n\t"             /* %10 += LO(HI(f) * HI(t))*/
+        A("add %10,r0")             /* %10 += LO(HI(f) * HI(t))*/
-        " adc %11,r1" "\n\t"             /* %11 += HI(HI(f) * HI(t))*/
+        A("adc %11,r1")             /* %11 += HI(HI(f) * HI(t))*/
-        " mov %5,%10" "\n\t"             /* %6:%5 =*/
+        A("mov %5,%10")             /* %6:%5 =*/
-        " mov %6,%11" "\n\t"             /* f = %10:%11*/
+        A("mov %6,%11")             /* f = %10:%11*/
         /* [15 +17*2] = [49]*/
 
         /* %4:%3:%2 will be acc from now on*/
 
         /* uint24_t acc = bezier_F; / Range 20 bits (unsigned)*/
-        " clr %9" "\n\t"                 /* "decimal place we get for free"*/
+        A("clr %9")                 /* "decimal place we get for free"*/
-        " lds %2,bezier_F" "\n\t"
+        A("lds %2,bezier_F")
-        " lds %3,bezier_F+1" "\n\t"
+        A("lds %3,bezier_F+1")
-        " lds %4,bezier_F+2" "\n\t"      /* %4:%3:%2 = acc*/
+        A("lds %4,bezier_F+2")      /* %4:%3:%2 = acc*/
 
         /* if (A_negative) {*/
-        " lds r0,A_negative" "\n\t"
+        A("lds r0,A_negative")
-        " or r0,%0" "\n\t"               /* Is flag signalling negative? */
+        A("or r0,%0")               /* Is flag signalling negative? */
-        " brne 3f" "\n\t"                /* If yes, Skip next instruction if A was negative*/
+        A("brne 3f")                /* If yes, Skip next instruction if A was negative*/
-        " rjmp 1f" "\n\t"                /* Otherwise, jump */
+        A("rjmp 1f")                /* Otherwise, jump */
 
         /* uint24_t v; */
         /* umul16x24to24hi(v, f, bezier_C); / Range 21bits [29] */
         /* acc -= v; */
-        "3:" "\n\t"
+        L("3")
-        " lds %10, bezier_C" "\n\t"      /* %10 = LO(bezier_C)*/
+        A("lds %10, bezier_C")      /* %10 = LO(bezier_C)*/
-        " mul %10,%5" "\n\t"             /* r1:r0 = LO(bezier_C) * LO(f)*/
+        A("mul %10,%5")             /* r1:r0 = LO(bezier_C) * LO(f)*/
-        " sub %9,r1" "\n\t"
+        A("sub %9,r1")
-        " sbc %2,%0" "\n\t"
+        A("sbc %2,%0")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= HI(LO(bezier_C) * LO(f))*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= HI(LO(bezier_C) * LO(f))*/
-        " lds %11, bezier_C+1" "\n\t"    /* %11 = MI(bezier_C)*/
+        A("lds %11, bezier_C+1")    /* %11 = MI(bezier_C)*/
-        " mul %11,%5" "\n\t"             /* r1:r0 = MI(bezier_C) * LO(f)*/
+        A("mul %11,%5")             /* r1:r0 = MI(bezier_C) * LO(f)*/
-        " sub %9,r0" "\n\t"
+        A("sub %9,r0")
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= MI(bezier_C) * LO(f)*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= MI(bezier_C) * LO(f)*/
-        " lds %1, bezier_C+2" "\n\t"     /* %1 = HI(bezier_C)*/
+        A("lds %1, bezier_C+2")     /* %1 = HI(bezier_C)*/
-        " mul %1,%5" "\n\t"              /* r1:r0 = MI(bezier_C) * LO(f)*/
+        A("mul %1,%5")              /* r1:r0 = MI(bezier_C) * LO(f)*/
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")
-        " sbc %3,r1" "\n\t"
+        A("sbc %3,r1")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 8*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 8*/
-        " mul %10,%6" "\n\t"             /* r1:r0 = LO(bezier_C) * MI(f)*/
+        A("mul %10,%6")             /* r1:r0 = LO(bezier_C) * MI(f)*/
-        " sub %9,r0" "\n\t"
+        A("sub %9,r0")
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= LO(bezier_C) * MI(f)*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= LO(bezier_C) * MI(f)*/
-        " mul %11,%6" "\n\t"             /* r1:r0 = MI(bezier_C) * MI(f)*/
+        A("mul %11,%6")             /* r1:r0 = MI(bezier_C) * MI(f)*/
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")
-        " sbc %3,r1" "\n\t"
+        A("sbc %3,r1")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= MI(bezier_C) * MI(f) << 8*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= MI(bezier_C) * MI(f) << 8*/
-        " mul %1,%6" "\n\t"              /* r1:r0 = HI(bezier_C) * LO(f)*/
+        A("mul %1,%6")              /* r1:r0 = HI(bezier_C) * LO(f)*/
-        " sub %3,r0" "\n\t"
+        A("sub %3,r0")
-        " sbc %4,r1" "\n\t"              /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 16*/
+        A("sbc %4,r1")              /* %4:%3:%2:%9 -= HI(bezier_C) * LO(f) << 16*/
 
         /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3  (unsigned) [17]*/
-        " mul %5,%7" "\n\t"              /* r1:r0 = LO(f) * LO(t)*/
+        A("mul %5,%7")              /* r1:r0 = LO(f) * LO(t)*/
-        " mov %1,r1" "\n\t"              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
+        A("mov %1,r1")              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
-        " clr %10" "\n\t"                /* %10 = 0*/
+        A("clr %10")                /* %10 = 0*/
-        " clr %11" "\n\t"                /* %11 = 0*/
+        A("clr %11")                /* %11 = 0*/
-        " mul %5,%8" "\n\t"              /* r1:r0 = LO(f) * HI(t)*/
+        A("mul %5,%8")              /* r1:r0 = LO(f) * HI(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(LO(f) * HI(t))*/
+        A("add %1,r0")              /* %1 += LO(LO(f) * HI(t))*/
-        " adc %10,r1" "\n\t"             /* %10 = HI(LO(f) * HI(t))*/
+        A("adc %10,r1")             /* %10 = HI(LO(f) * HI(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%7" "\n\t"              /* r1:r0 = HI(f) * LO(t)*/
+        A("mul %6,%7")              /* r1:r0 = HI(f) * LO(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(HI(f) * LO(t))*/
+        A("add %1,r0")              /* %1 += LO(HI(f) * LO(t))*/
-        " adc %10,r1" "\n\t"             /* %10 += HI(HI(f) * LO(t))*/
+        A("adc %10,r1")             /* %10 += HI(HI(f) * LO(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%8" "\n\t"              /* r1:r0 = HI(f) * HI(t)*/
+        A("mul %6,%8")              /* r1:r0 = HI(f) * HI(t)*/
-        " add %10,r0" "\n\t"             /* %10 += LO(HI(f) * HI(t))*/
+        A("add %10,r0")             /* %10 += LO(HI(f) * HI(t))*/
-        " adc %11,r1" "\n\t"             /* %11 += HI(HI(f) * HI(t))*/
+        A("adc %11,r1")             /* %11 += HI(HI(f) * HI(t))*/
-        " mov %5,%10" "\n\t"             /* %6:%5 =*/
+        A("mov %5,%10")             /* %6:%5 =*/
-        " mov %6,%11" "\n\t"             /* f = %10:%11*/
+        A("mov %6,%11")             /* f = %10:%11*/
 
         /* umul16x24to24hi(v, f, bezier_B); / Range 22bits [29]*/
         /* acc += v; */
-        " lds %10, bezier_B" "\n\t"      /* %10 = LO(bezier_B)*/
+        A("lds %10, bezier_B")      /* %10 = LO(bezier_B)*/
-        " mul %10,%5" "\n\t"             /* r1:r0 = LO(bezier_B) * LO(f)*/
+        A("mul %10,%5")             /* r1:r0 = LO(bezier_B) * LO(f)*/
-        " add %9,r1" "\n\t"
+        A("add %9,r1")
-        " adc %2,%0" "\n\t"
+        A("adc %2,%0")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += HI(LO(bezier_B) * LO(f))*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += HI(LO(bezier_B) * LO(f))*/
-        " lds %11, bezier_B+1" "\n\t"    /* %11 = MI(bezier_B)*/
+        A("lds %11, bezier_B+1")    /* %11 = MI(bezier_B)*/
-        " mul %11,%5" "\n\t"             /* r1:r0 = MI(bezier_B) * LO(f)*/
+        A("mul %11,%5")             /* r1:r0 = MI(bezier_B) * LO(f)*/
-        " add %9,r0" "\n\t"
+        A("add %9,r0")
-        " adc %2,r1" "\n\t"
+        A("adc %2,r1")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += MI(bezier_B) * LO(f)*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += MI(bezier_B) * LO(f)*/
-        " lds %1, bezier_B+2" "\n\t"     /* %1 = HI(bezier_B)*/
+        A("lds %1, bezier_B+2")     /* %1 = HI(bezier_B)*/
-        " mul %1,%5" "\n\t"              /* r1:r0 = MI(bezier_B) * LO(f)*/
+        A("mul %1,%5")              /* r1:r0 = MI(bezier_B) * LO(f)*/
-        " add %2,r0" "\n\t"
+        A("add %2,r0")
-        " adc %3,r1" "\n\t"
+        A("adc %3,r1")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 8*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 8*/
-        " mul %10,%6" "\n\t"             /* r1:r0 = LO(bezier_B) * MI(f)*/
+        A("mul %10,%6")             /* r1:r0 = LO(bezier_B) * MI(f)*/
-        " add %9,r0" "\n\t"
+        A("add %9,r0")
-        " adc %2,r1" "\n\t"
+        A("adc %2,r1")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += LO(bezier_B) * MI(f)*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += LO(bezier_B) * MI(f)*/
-        " mul %11,%6" "\n\t"             /* r1:r0 = MI(bezier_B) * MI(f)*/
+        A("mul %11,%6")             /* r1:r0 = MI(bezier_B) * MI(f)*/
-        " add %2,r0" "\n\t"
+        A("add %2,r0")
-        " adc %3,r1" "\n\t"
+        A("adc %3,r1")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += MI(bezier_B) * MI(f) << 8*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += MI(bezier_B) * MI(f) << 8*/
-        " mul %1,%6" "\n\t"              /* r1:r0 = HI(bezier_B) * LO(f)*/
+        A("mul %1,%6")              /* r1:r0 = HI(bezier_B) * LO(f)*/
-        " add %3,r0" "\n\t"
+        A("add %3,r0")
-        " adc %4,r1" "\n\t"              /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 16*/
+        A("adc %4,r1")              /* %4:%3:%2:%9 += HI(bezier_B) * LO(f) << 16*/
 
         /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^5  (unsigned) [17]*/
-        " mul %5,%7" "\n\t"              /* r1:r0 = LO(f) * LO(t)*/
+        A("mul %5,%7")              /* r1:r0 = LO(f) * LO(t)*/
-        " mov %1,r1" "\n\t"              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
+        A("mov %1,r1")              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
-        " clr %10" "\n\t"                /* %10 = 0*/
+        A("clr %10")                /* %10 = 0*/
-        " clr %11" "\n\t"                /* %11 = 0*/
+        A("clr %11")                /* %11 = 0*/
-        " mul %5,%8" "\n\t"              /* r1:r0 = LO(f) * HI(t)*/
+        A("mul %5,%8")              /* r1:r0 = LO(f) * HI(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(LO(f) * HI(t))*/
+        A("add %1,r0")              /* %1 += LO(LO(f) * HI(t))*/
-        " adc %10,r1" "\n\t"             /* %10 = HI(LO(f) * HI(t))*/
+        A("adc %10,r1")             /* %10 = HI(LO(f) * HI(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%7" "\n\t"              /* r1:r0 = HI(f) * LO(t)*/
+        A("mul %6,%7")              /* r1:r0 = HI(f) * LO(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(HI(f) * LO(t))*/
+        A("add %1,r0")              /* %1 += LO(HI(f) * LO(t))*/
-        " adc %10,r1" "\n\t"             /* %10 += HI(HI(f) * LO(t))*/
+        A("adc %10,r1")             /* %10 += HI(HI(f) * LO(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%8" "\n\t"              /* r1:r0 = HI(f) * HI(t)*/
+        A("mul %6,%8")              /* r1:r0 = HI(f) * HI(t)*/
-        " add %10,r0" "\n\t"             /* %10 += LO(HI(f) * HI(t))*/
+        A("add %10,r0")             /* %10 += LO(HI(f) * HI(t))*/
-        " adc %11,r1" "\n\t"             /* %11 += HI(HI(f) * HI(t))*/
+        A("adc %11,r1")             /* %11 += HI(HI(f) * HI(t))*/
-        " mov %5,%10" "\n\t"             /* %6:%5 =*/
+        A("mov %5,%10")             /* %6:%5 =*/
-        " mov %6,%11" "\n\t"             /* f = %10:%11*/
+        A("mov %6,%11")             /* f = %10:%11*/
 
         /* umul16x24to24hi(v, f, bezier_A); / Range 21bits [29]*/
         /* acc -= v; */
-        " lds %10, bezier_A" "\n\t"      /* %10 = LO(bezier_A)*/
+        A("lds %10, bezier_A")      /* %10 = LO(bezier_A)*/
-        " mul %10,%5" "\n\t"             /* r1:r0 = LO(bezier_A) * LO(f)*/
+        A("mul %10,%5")             /* r1:r0 = LO(bezier_A) * LO(f)*/
-        " sub %9,r1" "\n\t"
+        A("sub %9,r1")
-        " sbc %2,%0" "\n\t"
+        A("sbc %2,%0")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= HI(LO(bezier_A) * LO(f))*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= HI(LO(bezier_A) * LO(f))*/
-        " lds %11, bezier_A+1" "\n\t"    /* %11 = MI(bezier_A)*/
+        A("lds %11, bezier_A+1")    /* %11 = MI(bezier_A)*/
-        " mul %11,%5" "\n\t"             /* r1:r0 = MI(bezier_A) * LO(f)*/
+        A("mul %11,%5")             /* r1:r0 = MI(bezier_A) * LO(f)*/
-        " sub %9,r0" "\n\t"
+        A("sub %9,r0")
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= MI(bezier_A) * LO(f)*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= MI(bezier_A) * LO(f)*/
-        " lds %1, bezier_A+2" "\n\t"     /* %1 = HI(bezier_A)*/
+        A("lds %1, bezier_A+2")     /* %1 = HI(bezier_A)*/
-        " mul %1,%5" "\n\t"              /* r1:r0 = MI(bezier_A) * LO(f)*/
+        A("mul %1,%5")              /* r1:r0 = MI(bezier_A) * LO(f)*/
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")
-        " sbc %3,r1" "\n\t"
+        A("sbc %3,r1")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 8*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 8*/
-        " mul %10,%6" "\n\t"             /* r1:r0 = LO(bezier_A) * MI(f)*/
+        A("mul %10,%6")             /* r1:r0 = LO(bezier_A) * MI(f)*/
-        " sub %9,r0" "\n\t"
+        A("sub %9,r0")
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= LO(bezier_A) * MI(f)*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= LO(bezier_A) * MI(f)*/
-        " mul %11,%6" "\n\t"             /* r1:r0 = MI(bezier_A) * MI(f)*/
+        A("mul %11,%6")             /* r1:r0 = MI(bezier_A) * MI(f)*/
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")
-        " sbc %3,r1" "\n\t"
+        A("sbc %3,r1")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= MI(bezier_A) * MI(f) << 8*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= MI(bezier_A) * MI(f) << 8*/
-        " mul %1,%6" "\n\t"              /* r1:r0 = HI(bezier_A) * LO(f)*/
+        A("mul %1,%6")              /* r1:r0 = HI(bezier_A) * LO(f)*/
-        " sub %3,r0" "\n\t"
+        A("sub %3,r0")
-        " sbc %4,r1" "\n\t"              /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 16*/
+        A("sbc %4,r1")              /* %4:%3:%2:%9 -= HI(bezier_A) * LO(f) << 16*/
-        " jmp 2f" "\n\t"                 /* Done!*/
+        A("jmp 2f")                 /* Done!*/
 
-        "1:" "\n\t"
+        L("1")
 
         /* uint24_t v; */
         /* umul16x24to24hi(v, f, bezier_C); / Range 21bits [29]*/
         /* acc += v; */
-        " lds %10, bezier_C" "\n\t"      /* %10 = LO(bezier_C)*/
+        A("lds %10, bezier_C")      /* %10 = LO(bezier_C)*/
-        " mul %10,%5" "\n\t"             /* r1:r0 = LO(bezier_C) * LO(f)*/
+        A("mul %10,%5")             /* r1:r0 = LO(bezier_C) * LO(f)*/
-        " add %9,r1" "\n\t"
+        A("add %9,r1")
-        " adc %2,%0" "\n\t"
+        A("adc %2,%0")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += HI(LO(bezier_C) * LO(f))*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += HI(LO(bezier_C) * LO(f))*/
-        " lds %11, bezier_C+1" "\n\t"    /* %11 = MI(bezier_C)*/
+        A("lds %11, bezier_C+1")    /* %11 = MI(bezier_C)*/
-        " mul %11,%5" "\n\t"             /* r1:r0 = MI(bezier_C) * LO(f)*/
+        A("mul %11,%5")             /* r1:r0 = MI(bezier_C) * LO(f)*/
-        " add %9,r0" "\n\t"
+        A("add %9,r0")
-        " adc %2,r1" "\n\t"
+        A("adc %2,r1")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += MI(bezier_C) * LO(f)*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += MI(bezier_C) * LO(f)*/
-        " lds %1, bezier_C+2" "\n\t"     /* %1 = HI(bezier_C)*/
+        A("lds %1, bezier_C+2")     /* %1 = HI(bezier_C)*/
-        " mul %1,%5" "\n\t"              /* r1:r0 = MI(bezier_C) * LO(f)*/
+        A("mul %1,%5")              /* r1:r0 = MI(bezier_C) * LO(f)*/
-        " add %2,r0" "\n\t"
+        A("add %2,r0")
-        " adc %3,r1" "\n\t"
+        A("adc %3,r1")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 8*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 8*/
-        " mul %10,%6" "\n\t"             /* r1:r0 = LO(bezier_C) * MI(f)*/
+        A("mul %10,%6")             /* r1:r0 = LO(bezier_C) * MI(f)*/
-        " add %9,r0" "\n\t"
+        A("add %9,r0")
-        " adc %2,r1" "\n\t"
+        A("adc %2,r1")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += LO(bezier_C) * MI(f)*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += LO(bezier_C) * MI(f)*/
-        " mul %11,%6" "\n\t"             /* r1:r0 = MI(bezier_C) * MI(f)*/
+        A("mul %11,%6")             /* r1:r0 = MI(bezier_C) * MI(f)*/
-        " add %2,r0" "\n\t"
+        A("add %2,r0")
-        " adc %3,r1" "\n\t"
+        A("adc %3,r1")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += MI(bezier_C) * MI(f) << 8*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += MI(bezier_C) * MI(f) << 8*/
-        " mul %1,%6" "\n\t"              /* r1:r0 = HI(bezier_C) * LO(f)*/
+        A("mul %1,%6")              /* r1:r0 = HI(bezier_C) * LO(f)*/
-        " add %3,r0" "\n\t"
+        A("add %3,r0")
-        " adc %4,r1" "\n\t"              /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 16*/
+        A("adc %4,r1")              /* %4:%3:%2:%9 += HI(bezier_C) * LO(f) << 16*/
 
         /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^3  (unsigned) [17]*/
-        " mul %5,%7" "\n\t"              /* r1:r0 = LO(f) * LO(t)*/
+        A("mul %5,%7")              /* r1:r0 = LO(f) * LO(t)*/
-        " mov %1,r1" "\n\t"              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
+        A("mov %1,r1")              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
-        " clr %10" "\n\t"                /* %10 = 0*/
+        A("clr %10")                /* %10 = 0*/
-        " clr %11" "\n\t"                /* %11 = 0*/
+        A("clr %11")                /* %11 = 0*/
-        " mul %5,%8" "\n\t"              /* r1:r0 = LO(f) * HI(t)*/
+        A("mul %5,%8")              /* r1:r0 = LO(f) * HI(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(LO(f) * HI(t))*/
+        A("add %1,r0")              /* %1 += LO(LO(f) * HI(t))*/
-        " adc %10,r1" "\n\t"             /* %10 = HI(LO(f) * HI(t))*/
+        A("adc %10,r1")             /* %10 = HI(LO(f) * HI(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%7" "\n\t"              /* r1:r0 = HI(f) * LO(t)*/
+        A("mul %6,%7")              /* r1:r0 = HI(f) * LO(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(HI(f) * LO(t))*/
+        A("add %1,r0")              /* %1 += LO(HI(f) * LO(t))*/
-        " adc %10,r1" "\n\t"             /* %10 += HI(HI(f) * LO(t))*/
+        A("adc %10,r1")             /* %10 += HI(HI(f) * LO(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%8" "\n\t"              /* r1:r0 = HI(f) * HI(t)*/
+        A("mul %6,%8")              /* r1:r0 = HI(f) * HI(t)*/
-        " add %10,r0" "\n\t"             /* %10 += LO(HI(f) * HI(t))*/
+        A("add %10,r0")             /* %10 += LO(HI(f) * HI(t))*/
-        " adc %11,r1" "\n\t"             /* %11 += HI(HI(f) * HI(t))*/
+        A("adc %11,r1")             /* %11 += HI(HI(f) * HI(t))*/
-        " mov %5,%10" "\n\t"             /* %6:%5 =*/
+        A("mov %5,%10")             /* %6:%5 =*/
-        " mov %6,%11" "\n\t"             /* f = %10:%11*/
+        A("mov %6,%11")             /* f = %10:%11*/
 
         /* umul16x24to24hi(v, f, bezier_B); / Range 22bits [29]*/
         /* acc -= v;*/
-        " lds %10, bezier_B" "\n\t"      /* %10 = LO(bezier_B)*/
+        A("lds %10, bezier_B")      /* %10 = LO(bezier_B)*/
-        " mul %10,%5" "\n\t"             /* r1:r0 = LO(bezier_B) * LO(f)*/
+        A("mul %10,%5")             /* r1:r0 = LO(bezier_B) * LO(f)*/
-        " sub %9,r1" "\n\t"
+        A("sub %9,r1")
-        " sbc %2,%0" "\n\t"
+        A("sbc %2,%0")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= HI(LO(bezier_B) * LO(f))*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= HI(LO(bezier_B) * LO(f))*/
-        " lds %11, bezier_B+1" "\n\t"    /* %11 = MI(bezier_B)*/
+        A("lds %11, bezier_B+1")    /* %11 = MI(bezier_B)*/
-        " mul %11,%5" "\n\t"             /* r1:r0 = MI(bezier_B) * LO(f)*/
+        A("mul %11,%5")             /* r1:r0 = MI(bezier_B) * LO(f)*/
-        " sub %9,r0" "\n\t"
+        A("sub %9,r0")
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= MI(bezier_B) * LO(f)*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= MI(bezier_B) * LO(f)*/
-        " lds %1, bezier_B+2" "\n\t"     /* %1 = HI(bezier_B)*/
+        A("lds %1, bezier_B+2")     /* %1 = HI(bezier_B)*/
-        " mul %1,%5" "\n\t"              /* r1:r0 = MI(bezier_B) * LO(f)*/
+        A("mul %1,%5")              /* r1:r0 = MI(bezier_B) * LO(f)*/
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")
-        " sbc %3,r1" "\n\t"
+        A("sbc %3,r1")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 8*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 8*/
-        " mul %10,%6" "\n\t"             /* r1:r0 = LO(bezier_B) * MI(f)*/
+        A("mul %10,%6")             /* r1:r0 = LO(bezier_B) * MI(f)*/
-        " sub %9,r0" "\n\t"
+        A("sub %9,r0")
-        " sbc %2,r1" "\n\t"
+        A("sbc %2,r1")
-        " sbc %3,%0" "\n\t"
+        A("sbc %3,%0")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= LO(bezier_B) * MI(f)*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= LO(bezier_B) * MI(f)*/
-        " mul %11,%6" "\n\t"             /* r1:r0 = MI(bezier_B) * MI(f)*/
+        A("mul %11,%6")             /* r1:r0 = MI(bezier_B) * MI(f)*/
-        " sub %2,r0" "\n\t"
+        A("sub %2,r0")
-        " sbc %3,r1" "\n\t"
+        A("sbc %3,r1")
-        " sbc %4,%0" "\n\t"              /* %4:%3:%2:%9 -= MI(bezier_B) * MI(f) << 8*/
+        A("sbc %4,%0")              /* %4:%3:%2:%9 -= MI(bezier_B) * MI(f) << 8*/
-        " mul %1,%6" "\n\t"              /* r1:r0 = HI(bezier_B) * LO(f)*/
+        A("mul %1,%6")              /* r1:r0 = HI(bezier_B) * LO(f)*/
-        " sub %3,r0" "\n\t"
+        A("sub %3,r0")
-        " sbc %4,r1" "\n\t"              /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 16*/
+        A("sbc %4,r1")              /* %4:%3:%2:%9 -= HI(bezier_B) * LO(f) << 16*/
 
         /* umul16x16to16hi(f, f, t); / Range 16 bits : f = t^5  (unsigned) [17]*/
-        " mul %5,%7" "\n\t"              /* r1:r0 = LO(f) * LO(t)*/
+        A("mul %5,%7")              /* r1:r0 = LO(f) * LO(t)*/
-        " mov %1,r1" "\n\t"              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
+        A("mov %1,r1")              /* store MIL(LO(f) * LO(t)) in %1, we need it for rounding*/
-        " clr %10" "\n\t"                /* %10 = 0*/
+        A("clr %10")                /* %10 = 0*/
-        " clr %11" "\n\t"                /* %11 = 0*/
+        A("clr %11")                /* %11 = 0*/
-        " mul %5,%8" "\n\t"              /* r1:r0 = LO(f) * HI(t)*/
+        A("mul %5,%8")              /* r1:r0 = LO(f) * HI(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(LO(f) * HI(t))*/
+        A("add %1,r0")              /* %1 += LO(LO(f) * HI(t))*/
-        " adc %10,r1" "\n\t"             /* %10 = HI(LO(f) * HI(t))*/
+        A("adc %10,r1")             /* %10 = HI(LO(f) * HI(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%7" "\n\t"              /* r1:r0 = HI(f) * LO(t)*/
+        A("mul %6,%7")              /* r1:r0 = HI(f) * LO(t)*/
-        " add %1,r0" "\n\t"              /* %1 += LO(HI(f) * LO(t))*/
+        A("add %1,r0")              /* %1 += LO(HI(f) * LO(t))*/
-        " adc %10,r1" "\n\t"             /* %10 += HI(HI(f) * LO(t))*/
+        A("adc %10,r1")             /* %10 += HI(HI(f) * LO(t))*/
-        " adc %11,%0" "\n\t"             /* %11 += carry*/
+        A("adc %11,%0")             /* %11 += carry*/
-        " mul %6,%8" "\n\t"              /* r1:r0 = HI(f) * HI(t)*/
+        A("mul %6,%8")              /* r1:r0 = HI(f) * HI(t)*/
-        " add %10,r0" "\n\t"             /* %10 += LO(HI(f) * HI(t))*/
+        A("add %10,r0")             /* %10 += LO(HI(f) * HI(t))*/
-        " adc %11,r1" "\n\t"             /* %11 += HI(HI(f) * HI(t))*/
+        A("adc %11,r1")             /* %11 += HI(HI(f) * HI(t))*/
-        " mov %5,%10" "\n\t"             /* %6:%5 =*/
+        A("mov %5,%10")             /* %6:%5 =*/
-        " mov %6,%11" "\n\t"             /* f = %10:%11*/
+        A("mov %6,%11")             /* f = %10:%11*/
 
         /* umul16x24to24hi(v, f, bezier_A); / Range 21bits [29]*/
         /* acc += v; */
-        " lds %10, bezier_A" "\n\t"      /* %10 = LO(bezier_A)*/
+        A("lds %10, bezier_A")      /* %10 = LO(bezier_A)*/
-        " mul %10,%5" "\n\t"             /* r1:r0 = LO(bezier_A) * LO(f)*/
+        A("mul %10,%5")             /* r1:r0 = LO(bezier_A) * LO(f)*/
-        " add %9,r1" "\n\t"
+        A("add %9,r1")
-        " adc %2,%0" "\n\t"
+        A("adc %2,%0")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += HI(LO(bezier_A) * LO(f))*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += HI(LO(bezier_A) * LO(f))*/
-        " lds %11, bezier_A+1" "\n\t"    /* %11 = MI(bezier_A)*/
+        A("lds %11, bezier_A+1")    /* %11 = MI(bezier_A)*/
-        " mul %11,%5" "\n\t"             /* r1:r0 = MI(bezier_A) * LO(f)*/
+        A("mul %11,%5")             /* r1:r0 = MI(bezier_A) * LO(f)*/
-        " add %9,r0" "\n\t"
+        A("add %9,r0")
-        " adc %2,r1" "\n\t"
+        A("adc %2,r1")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += MI(bezier_A) * LO(f)*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += MI(bezier_A) * LO(f)*/
-        " lds %1, bezier_A+2" "\n\t"     /* %1 = HI(bezier_A)*/
+        A("lds %1, bezier_A+2")     /* %1 = HI(bezier_A)*/
-        " mul %1,%5" "\n\t"              /* r1:r0 = MI(bezier_A) * LO(f)*/
+        A("mul %1,%5")              /* r1:r0 = MI(bezier_A) * LO(f)*/
-        " add %2,r0" "\n\t"
+        A("add %2,r0")
-        " adc %3,r1" "\n\t"
+        A("adc %3,r1")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 8*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 8*/
-        " mul %10,%6" "\n\t"             /* r1:r0 = LO(bezier_A) * MI(f)*/
+        A("mul %10,%6")             /* r1:r0 = LO(bezier_A) * MI(f)*/
-        " add %9,r0" "\n\t"
+        A("add %9,r0")
-        " adc %2,r1" "\n\t"
+        A("adc %2,r1")
-        " adc %3,%0" "\n\t"
+        A("adc %3,%0")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += LO(bezier_A) * MI(f)*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += LO(bezier_A) * MI(f)*/
-        " mul %11,%6" "\n\t"             /* r1:r0 = MI(bezier_A) * MI(f)*/
+        A("mul %11,%6")             /* r1:r0 = MI(bezier_A) * MI(f)*/
-        " add %2,r0" "\n\t"
+        A("add %2,r0")
-        " adc %3,r1" "\n\t"
+        A("adc %3,r1")
-        " adc %4,%0" "\n\t"              /* %4:%3:%2:%9 += MI(bezier_A) * MI(f) << 8*/
+        A("adc %4,%0")              /* %4:%3:%2:%9 += MI(bezier_A) * MI(f) << 8*/
-        " mul %1,%6" "\n\t"              /* r1:r0 = HI(bezier_A) * LO(f)*/
+        A("mul %1,%6")              /* r1:r0 = HI(bezier_A) * LO(f)*/
-        " add %3,r0" "\n\t"
+        A("add %3,r0")
-        " adc %4,r1" "\n\t"              /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 16*/
+        A("adc %4,r1")              /* %4:%3:%2:%9 += HI(bezier_A) * LO(f) << 16*/
-        "2:" "\n\t"
+        L("2")
         " clr __zero_reg__"              /* C runtime expects r1 = __zero_reg__ = 0 */
         : "+r"(r0),
           "+r"(r1),
@@ -1072,19 +1072,19 @@ void Stepper::set_directions() {
 
          __asm__ __volatile__(
           ".syntax unified" "\n\t"              // is to prevent CM0,CM1 non-unified syntax
-          " lsrs  %[ahi],%[alo],#1"           "\n\t"  // a  = F << 31      1 cycles
+          A("lsrs  %[ahi],%[alo],#1")           // a  = F << 31      1 cycles
-          " lsls  %[alo],%[alo],#31"          "\n\t"  //                   1 cycles
+          A("lsls  %[alo],%[alo],#31")          //                   1 cycles
-          " umull %[flo],%[fhi],%[fhi],%[t]"  "\n\t"  // f *= t            5 cycles [fhi:flo=64bits]
+          A("umull %[flo],%[fhi],%[fhi],%[t]")  // f *= t            5 cycles [fhi:flo=64bits]
-          " umull %[flo],%[fhi],%[fhi],%[t]"  "\n\t"  // f>>=32; f*=t      5 cycles [fhi:flo=64bits]
+          A("umull %[flo],%[fhi],%[fhi],%[t]")  // f>>=32; f*=t      5 cycles [fhi:flo=64bits]
-          " lsrs  %[flo],%[fhi],#1"           "\n\t"  //                   1 cycles [31bits]
+          A("lsrs  %[flo],%[fhi],#1")           //                   1 cycles [31bits]
-          " smlal %[alo],%[ahi],%[flo],%[C]"  "\n\t"  // a+=(f>>33)*C;     5 cycles
+          A("smlal %[alo],%[ahi],%[flo],%[C]")  // a+=(f>>33)*C;     5 cycles
-          " umull %[flo],%[fhi],%[fhi],%[t]"  "\n\t"  // f>>=32; f*=t      5 cycles [fhi:flo=64bits]
+          A("umull %[flo],%[fhi],%[fhi],%[t]")  // f>>=32; f*=t      5 cycles [fhi:flo=64bits]
-          " lsrs  %[flo],%[fhi],#1"           "\n\t"  //                   1 cycles [31bits]
+          A("lsrs  %[flo],%[fhi],#1")           //                   1 cycles [31bits]
-          " smlal %[alo],%[ahi],%[flo],%[B]"  "\n\t"  // a+=(f>>33)*B;     5 cycles
+          A("smlal %[alo],%[ahi],%[flo],%[B]")  // a+=(f>>33)*B;     5 cycles
-          " umull %[flo],%[fhi],%[fhi],%[t]"  "\n\t"  // f>>=32; f*=t      5 cycles [fhi:flo=64bits]
+          A("umull %[flo],%[fhi],%[fhi],%[t]")  // f>>=32; f*=t      5 cycles [fhi:flo=64bits]
-          " lsrs  %[flo],%[fhi],#1"           "\n\t"  // f>>=33;           1 cycles [31bits]
+          A("lsrs  %[flo],%[fhi],#1")           // f>>=33;           1 cycles [31bits]
-          " smlal %[alo],%[ahi],%[flo],%[A]"  "\n\t"  // a+=(f>>33)*A;     5 cycles
+          A("smlal %[alo],%[ahi],%[flo],%[A]")  // a+=(f>>33)*A;     5 cycles
-          " lsrs  %[alo],%[ahi],#6"           "\n\t"  // a>>=38            1 cycles
+          A("lsrs  %[alo],%[ahi],#6")           // a>>=38            1 cycles
           : [alo]"+r"( alo ) ,
             [flo]"+r"( flo ) ,
             [fhi]"+r"( fhi ) ,