diff --git a/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h b/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h index 5cae63d31a..122dad2146 100644 --- a/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h +++ b/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h @@ -120,7 +120,7 @@ #define SD_MISO_PIN 19 #define SD_SCK_PIN 18 #define SDSS 5 -#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal(Jump to SDDET) +#define SD_DETECT_PIN 34 // IO34 default is SD_DET signal (Jump to SDDET) #define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers /** @@ -177,9 +177,9 @@ #elif ENABLED(MKS_MINI_12864_V3) + #define LCD_PINS_DC EXP1_07_PIN #define DOGLCD_CS EXP1_08_PIN - #define DOGLCD_A0 EXP1_07_PIN - #define LCD_PINS_DC DOGLCD_A0 + #define DOGLCD_A0 LCD_PINS_DC #define LCD_BACKLIGHT_PIN -1 #define LCD_RESET_PIN EXP1_06_PIN #define NEOPIXEL_PIN EXP1_05_PIN diff --git a/Marlin/src/pins/esp32/pins_PANDA_common.h b/Marlin/src/pins/esp32/pins_PANDA_common.h index 81862fbd55..7deeca3f62 100644 --- a/Marlin/src/pins/esp32/pins_PANDA_common.h +++ b/Marlin/src/pins/esp32/pins_PANDA_common.h @@ -62,6 +62,13 @@ #define TEMP_0_PIN 39 // Analog Input #define TEMP_BED_PIN 36 // Analog Input +#if ENABLED(MAX31856_PANDAPI) + #define MAX31856_CLK_PIN 29 + #define MAX31856_MISO_PIN 24 + #define MAX31856_MOSI_PIN 28 + #define MAX31856_CS_PIN 27 +#endif + // // Heaters / Fans // @@ -74,25 +81,48 @@ #define E0_AUTO_FAN_PIN 120 // FAN2 #endif +/** ------ ------ + * (MISO 19?) |10 9 | (18 SCK?) (BEEPER) 129 |10 9 | 12 (^ENC) + * (EN1) 33 | 8 7 | (5 SDSS?) (EN) 26 | 8 7 | 27 (RS) + * (EN2) 32 6 5 | (23 MOSI?) (D4) 14 | 6 5 -- + * (SDDET 2?) | 4 3 | (RESET) -- | 4 3 | -- + * -- | 2 1 | -- (GND) | 2 1 | (5V) + * ------ ------ + * EXP2 EXP1 + */ +#define EXP1_06_PIN 14 +#define EXP1_07_PIN 27 +#define EXP1_08_PIN 26 +#define EXP1_09_PIN 12 +#define EXP1_10_PIN 129 + +#define EXP2_04_PIN 2 // ? +#define EXP2_05_PIN 23 // ? +#define EXP2_06_PIN 32 +#define EXP2_07_PIN 5 // ? +#define EXP2_08_PIN 33 +#define EXP2_09_PIN 18 // ? +#define EXP2_10_PIN 19 // ? + // -// SD card +// SD Card // #if ENABLED(SDSUPPORT) - #define SD_MOSI_PIN 23 - #define SD_MISO_PIN 19 - #define SD_SCK_PIN 18 - #define SDSS 5 - #define SD_DETECT_PIN 2 + #define SD_MOSI_PIN EXP2_05_PIN + #define SD_MISO_PIN EXP2_10_PIN + #define SD_SCK_PIN EXP2_09_PIN + #define SDSS EXP2_07_PIN + #define SD_DETECT_PIN EXP2_04_PIN #endif #if HAS_WIRED_LCD - #define BEEPER_PIN 129 - #define BTN_ENC 12 + #define BEEPER_PIN EXP1_10_PIN - #define BTN_EN1 33 - #define BTN_EN2 32 + #define BTN_ENC EXP1_09_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN - #define LCD_PINS_RS 27 - #define LCD_PINS_ENABLE 26 - #define LCD_PINS_D4 14 + #define LCD_PINS_RS EXP1_07_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_D4 EXP1_06_PIN #endif diff --git a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h index af5cfd6a2e..4a32472949 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h @@ -84,7 +84,7 @@ #define E1_ENABLE_PIN 33 // -// Filament runout +// Filament Runout Sensor // #define FIL_RUNOUT_PIN 42 // ROT2 Connector #define FIL_RUNOUT2_PIN 44 // ROT1 Connector diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index d5122e46a9..eb92ab5cd0 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -69,7 +69,7 @@ #endif // -// Filament Runout Pins +// Filament Runout Sensor // #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 49 diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 94e6ccdcbe..70da23af73 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -120,14 +120,14 @@ #define X_DIR_PIN 55 #define X_ENABLE_PIN 38 #ifndef X_CS_PIN - #define X_CS_PIN AUX3_03_PIN + #define X_CS_PIN 53 #endif #define Y_STEP_PIN 60 #define Y_DIR_PIN 61 #define Y_ENABLE_PIN 56 #ifndef Y_CS_PIN - #define Y_CS_PIN AUX3_07_PIN + #define Y_CS_PIN 49 #endif #ifndef Z_STEP_PIN @@ -241,7 +241,7 @@ // Misc. Functions // #ifndef SDSS - #define SDSS AUX3_03_PIN + #define SDSS AUX3_06_PIN #endif #define LED_PIN 13 @@ -423,18 +423,22 @@ #endif // -// AUX1 : 5V GND D2 D1 -// 5V GND A3 A4 - +// AUX1 5V GND D2 D1 +// 2 4 6 8 +// 1 3 5 7 +// 5V GND A3 A4 +// #define AUX1_05_PIN 57 // (A3) #define AUX1_06_PIN 2 #define AUX1_07_PIN 58 // (A4) #define AUX1_08_PIN 1 // -// AUX2 : GND A9 D40 D42 A11 -// VCC A5 A10 D44 A12 - +// AUX2 GND A9 D40 D42 A11 +// 2 4 6 8 10 +// 1 3 5 7 9 +// VCC A5 A10 D44 A12 +// #define AUX2_03_PIN 59 // (A5) #define AUX2_04_PIN 63 // (A9) #define AUX2_05_PIN 64 // (A10) @@ -445,19 +449,20 @@ #define AUX2_10_PIN 65 // (A11) // -// AUX3 : GND D52 D50 5V -// NC D53 D51 D49 - -#define AUX3_03_PIN 53 -#define AUX3_04_PIN 52 -#define AUX3_05_PIN 51 -#define AUX3_06_PIN 50 -#define AUX3_07_PIN 49 +// AUX3 GND D52 D50 5V +// 7 5 3 1 +// 8 6 4 2 +// NC D53 D51 D49 +// +#define AUX3_02_PIN 49 +#define AUX3_03_PIN 50 +#define AUX3_04_PIN 51 +#define AUX3_05_PIN 52 +#define AUX3_06_PIN 53 // -// AUX4 : D16 D17 D23 D25 D27 D29 D31 D33 D35 D37 D39 D41 D43 D45 D47 D32 GND 5V +// AUX4 5V GND D32 D47 D45 D43 D41 D39 D37 D35 D33 D31 D29 D27 D25 D23 D17 D16 // - #define AUX4_03_PIN 32 #define AUX4_04_PIN 47 #define AUX4_05_PIN 45 @@ -476,35 +481,69 @@ #define AUX4_18_PIN 16 /** - * LCD adapter. NOTE: These come in two variants. The socket keys can be + * LCD adapters come in different variants. The socket keys can be * on either side, and may be backwards on some boards / displays. - * ------ ------ - * D37 |10 9 | D35 (MISO) D50 |10 9 | D52 (SCK) - * D17 | 8 7 | D16 D31 | 8 7 | D53 - * D23 6 5 D25 D33 6 5 D51 (MOSI) - * D27 | 4 3 | D29 D49 | 4 3 | D41 - * GND | 2 1 | 5V GND | 2 1 | -- - * ------ ------ - * EXP1 EXP2 */ #ifndef EXP1_03_PIN + #define EXP1_03_PIN AUX4_13_PIN #define EXP1_04_PIN AUX4_14_PIN #define EXP1_05_PIN AUX4_15_PIN #define EXP1_06_PIN AUX4_16_PIN #define EXP1_07_PIN AUX4_18_PIN #define EXP1_08_PIN AUX4_17_PIN - #define EXP1_09_PIN AUX4_10_PIN - #define EXP1_10_PIN AUX4_09_PIN - #define EXP2_03_PIN AUX4_07_PIN - #define EXP2_04_PIN AUX3_07_PIN - #define EXP2_05_PIN AUX3_05_PIN - #define EXP2_06_PIN AUX4_11_PIN - #define EXP2_07_PIN AUX3_03_PIN - #define EXP2_08_PIN AUX4_12_PIN - #define EXP2_09_PIN AUX3_04_PIN - #define EXP2_10_PIN AUX3_06_PIN + #define EXP2_04_PIN AUX3_02_PIN + #define EXP2_05_PIN AUX3_04_PIN + #define EXP2_07_PIN AUX3_06_PIN + #define EXP2_09_PIN AUX3_05_PIN + #define EXP2_10_PIN AUX3_03_PIN + + #if ENABLED(G3D_PANEL) + /** Gadgets3D Smart Adapter + * ------ ------ + * 4-11 |10 9 | 4-12 (MISO) 3-03 |10 9 | 3-05 (SCK) + * 4-17 | 8 7 | 4-18 4-10 | 8 7 | 3-06 + * 4-16 6 5 | 4-15 4-09 6 5 | 3-04 (MOSI) + * 4-14 | 4 3 | 4-13 3-02 | 4 3 | 4-07 + * (GND) 4-02 | 2 1 | 4-01 (5V) -- | 2 1 | -- + * ------ ------ + * EXP1 EXP2 + */ + #define EXP1_09_PIN AUX4_12_PIN + #define EXP1_10_PIN AUX4_11_PIN + + #define EXP2_03_PIN AUX4_07_PIN + #define EXP2_06_PIN AUX4_09_PIN + #define EXP2_08_PIN AUX4_10_PIN + + #else + + /** Smart Adapter (c) RRD + * ------ ------ + * 4-09 |10 9 | 4-10 (MISO) 3-03 |10 9 | 3-05 (SCK) + * 4-17 | 8 7 | 4-18 4-12 | 8 7 | 3-06 + * 4-16 6 5 | 4-15 4-11 6 5 | 3-04 (MOSI) + * 4-14 | 4 3 | 4-13 3-02 | 4 3 | 4-07 + * (GND) 3-07 | 2 1 | 3-01 (5V) (GND) 3-07 | 2 1 | -- + * ------ ------ + * EXP1 EXP2 + */ + #define EXP1_09_PIN AUX4_10_PIN + #define EXP1_10_PIN AUX4_09_PIN + + #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) + #define EXP2_03_PIN -1 // RESET + #define EXP2_06_PIN AUX4_12_PIN + #define EXP2_08_PIN AUX4_11_PIN + #else + #define EXP2_03_PIN AUX4_07_PIN + #define EXP2_06_PIN AUX4_11_PIN + #define EXP2_08_PIN AUX4_12_PIN + #endif + + #endif + #endif ////////////////////////// @@ -752,7 +791,7 @@ #define BTN_EN2 AUX2_04_PIN #define BTN_ENC AUX2_03_PIN - #define SD_DETECT_PIN AUX3_07_PIN + #define SD_DETECT_PIN AUX3_02_PIN #define KILL_PIN AUX2_05_PIN #elif ENABLED(ZONESTAR_LCD) @@ -765,14 +804,14 @@ #elif ENABLED(G3D_PANEL) - #define BEEPER_PIN EXP2_06_PIN + #define BEEPER_PIN EXP1_10_PIN #define SD_DETECT_PIN EXP2_04_PIN #define KILL_PIN EXP2_03_PIN - #define BTN_EN1 EXP1_10_PIN - #define BTN_EN2 EXP1_09_PIN - #define BTN_ENC EXP2_08_PIN + #define BTN_EN1 EXP2_06_PIN + #define BTN_EN2 EXP2_08_PIN + #define BTN_ENC EXP1_09_PIN #elif IS_TFTGLCD_PANEL @@ -785,7 +824,7 @@ #if ENABLED(PANEL_ONE) // Buttons connect directly to AUX-2 #define BTN_EN1 AUX2_03_PIN #define BTN_EN2 AUX2_04_PIN - #define BTN_ENC AUX3_07_PIN + #define BTN_ENC AUX3_02_PIN #else #define BTN_EN1 EXP1_10_PIN #define BTN_EN2 EXP1_09_PIN @@ -819,15 +858,15 @@ /** * FYSETC TFT-81050 display pinout * - * Board Display - * ------ ------ - * GND |10 9 | -- 5V |10 9 | GND - * (SD_DET) 49 | 8 7 | RESET RESET | 8 7 | (SD_DET) - * (BTN_EN1) 31 6 5 | 51 (MOSI) (MOSI) 6 5 | (LCD_CS) - * (BTN_EN2) 33 | 4 3 | 53 (SD_CS) (SD_CS) | 4 3 | (MOD_RESET) - * (MISO) 50 | 2 1 | 52 (SCK) (SCK) | 2 1 | (MISO) - * ------ ------ - * EXP2 EXP1 + * Board Display + * ------ ------ + * (MISO) 50 |10 9 | 52 (SCK) 5V |10 9 | GND + * (BTN_EN2) 33 | 8 7 | 53 (SD_CS) RESET | 8 7 | (SD_DET) + * (BTN_EN1) 31 6 5 | 51 (MOSI) (MOSI) 6 5 | (LCD_CS) + * (SD_DET) 49 | 4 3 | RESET (SD_CS) | 4 3 | (MOD_RESET) + * GND | 2 1 | -- (SCK) | 2 1 | (MISO) + * ------ ------ + * EXP2 * * Needs custom cable: * @@ -852,6 +891,7 @@ #define SD_DETECT_PIN EXP2_04_PIN - #define CLCD_MOD_RESET EXP2_08_PIN - #define CLCD_SPI_CS EXP2_06_PIN + #define CLCD_MOD_RESET EXP2_06_PIN + #define CLCD_SPI_CS EXP2_08_PIN + #endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050 diff --git a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h index cb2dec1600..0a8143c376 100644 --- a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h +++ b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h @@ -146,7 +146,7 @@ #define FAN1_PIN -1 // -//filament run out sensor +// Filament Runout Sensor // #if EITHER(Z6S_ZFAULT, Z6BS_ZFAULT) #define FIL_RUNOUT_PIN 13 @@ -162,32 +162,38 @@ #endif #define SD_DETECT_PIN -1 -/*=================================================== - * ZMIB Version 1 - EXP1 Connector - * MOSI(D5) TX1(D11) ENA(D12) ENC(D29/A2) 5V - * SCK(D7) RX1(D10) SCS(D4) ENB(D2) GND - *=================================================== - * ZMIB Version 2 - EXP1 Connector - * MOSI(D5) TX1(D11) ENA(D12) ENC(D29/A2) 5V - * SCK(D7) RX1(D10) SCS(D3) ENB(D2) GND - *=================================================== - * LCD 128x64 - *==================================================*/ +/** EXP1 + * ------ + * (MOSI) D5 |10 9 | D7 (SCK) + * (CS) D11 | 8 7 | D10 (DC/D4) + * (EN2) D12 6 5 | D4 or D3 (EN/RS) + * (ENC) D29 | 4 3 | D2 (EN1) + * (GND) | 2 1 | (5V) + * ------ + */ +#define EXP1_03_PIN 2 +#define EXP1_04_PIN 29 +#ifndef IS_ZMIB_V2 + #define EXP1_05_PIN 4 // ZMIB V1 +#else + #define EXP1_05_PIN 3 // ZMIB V2 +#endif +#define EXP1_06_PIN 12 +#define EXP1_07_PIN 10 +#define EXP1_08_PIN 11 +#define EXP1_09_PIN 7 +#define EXP1_10_PIN 5 #if ENABLED(ZONESTAR_12864LCD) // // LCD 128x64 // - #define LCDSCREEN_NAME "ZONESTAR_12864LCD" + #define LCDSCREEN_NAME "ZONESTAR_12864LCD" #define FORCE_SOFT_SPI - //#define LCD_SDSS 11 - #define LCD_PINS_RS 11 // ST7920_CS_PIN LCD_PIN_RS (PIN4 of LCD module) - #ifdef IS_ZMIB_V2 - #define LCD_PINS_ENABLE 3 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module) - #else - #define LCD_PINS_ENABLE 4 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module) - #endif - #define LCD_PINS_D4 10 // ST7920_CLK_PIN LCD_PIN_ENABLE (PIN6 of LCD module) + //#define LCD_SDSS EXP1_08_PIN + #define LCD_PINS_RS EXP1_08_PIN // ST7920_CS_PIN (LCD module pin 4) + #define LCD_PINS_ENABLE EXP1_05_PIN // ST7920_DAT_PIN (LCD module pin 5) + #define LCD_PINS_D4 EXP1_07_PIN // ST7920_CLK_PIN (LCD module pin 6) #define BOARD_ST7920_DELAY_1 DELAY_2_NOP #define BOARD_ST7920_DELAY_2 DELAY_2_NOP @@ -199,34 +205,28 @@ // #define LCDSCREEN_NAME "ZONESTAR 12864OLED" #define FORCE_SOFT_SPI - #ifdef IS_ZMIB_V2 - #define LCD_PINS_RS 3 // RESET - #else - #define LCD_PINS_RS 4 // RESET - #endif - #define LCD_PINS_DC 10 // DC - #define DOGLCD_CS 11 // CS + #define LCD_PINS_RS EXP1_05_PIN + #define LCD_PINS_DC EXP1_07_PIN + #define DOGLCD_CS EXP1_08_PIN + #if ENABLED(OLED_HW_IIC) #error "Oops! can't choose HW IIC for ZMIB board!!" - #elif ENABLED(OLED_HW_SPI) - // HW SPI - #define DOGLCD_A0 LCD_PINS_DC // A0 = DC #else - // SW SPI - #define DOGLCD_A0 LCD_PINS_DC // A0 = DC - #define DOGLCD_MOSI AVR_MOSI_PIN // SDA - #define DOGLCD_SCK AVR_SCK_PIN // SCK + #define DOGLCD_A0 LCD_PINS_DC + #if DISABLED(OLED_HW_SPI) + #define DOGLCD_MOSI AVR_MOSI_PIN // Software SPI + #define DOGLCD_SCK AVR_SCK_PIN + #endif #endif - #endif // // All the above are also RRDSC with rotary encoder // #if IS_RRD_SC - #define BTN_EN1 2 - #define BTN_EN2 12 - #define BTN_ENC 29 + #define BTN_EN1 EXP1_03_PIN + #define BTN_EN2 EXP1_06_PIN + #define BTN_ENC EXP1_04_PIN #define BEEPER_PIN -1 #define KILL_PIN -1 #endif diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index 520764a503..03547381c0 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -186,7 +186,7 @@ #ifdef GTM32_PRO_VB_USE_LCD_BEEPER // This is pin 32 on J2 FFC40 and pin, goes to the beeper // on Geeetech's version of RepRapDiscount Smart Controller - // (e.g. on Rostock 301) + // (e.g., on Rostock 301) #define BEEPER_PIN PE12 #else // This is the beeper on the board itself diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index 29baeba934..150c18d79a 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -125,7 +125,7 @@ //#define TEMP_0_CS_PIN PE6 // TC2 - CS2 // -// Filament runout sensor +// Filament Runout Sensor // #define FIL_RUNOUT_PIN PF11 // MT_DET diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 11d42ca6de..88c5d5f53c 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -315,9 +315,9 @@ #endif #elif ENABLED(FYSETC_MINI_12864_2_1) + #define LCD_PINS_DC PC6 #define DOGLCD_CS PD13 - #define DOGLCD_A0 PC6 - #define LCD_PINS_DC DOGLCD_A0 + #define DOGLCD_A0 DOGLCD_A0 #define LCD_BACKLIGHT_PIN -1 #define LCD_RESET_PIN PE14 #define NEOPIXEL_PIN PE15 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index 14591eb781..a1a822a9c2 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -197,9 +197,10 @@ #define DOGLCD_MOSI EXP2_05_PIN #elif ENABLED(FYSETC_MINI_12864_2_1) + + #define LCD_PINS_DC EXP1_07_PIN #define DOGLCD_CS EXP1_08_PIN - #define DOGLCD_A0 EXP1_07_PIN - #define LCD_PINS_DC DOGLCD_A0 + #define DOGLCD_A0 LCD_PINS_DC #define LCD_BACKLIGHT_PIN -1 #define LCD_RESET_PIN EXP1_06_PIN #define NEOPIXEL_PIN EXP1_05_PIN diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index 40ce442e6c..07ee8c4fa0 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -341,9 +341,9 @@ #endif #elif ENABLED(FYSETC_MINI_12864_2_1) + #define LCD_PINS_DC PC6 #define DOGLCD_CS PD13 - #define DOGLCD_A0 PC6 - #define LCD_PINS_DC DOGLCD_A0 + #define DOGLCD_A0 DOGLCD_A0 #define LCD_BACKLIGHT_PIN -1 #define LCD_RESET_PIN PE14 #define NEOPIXEL_PIN PE15 diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h index ba948bc479..b1e5f77d0e 100644 --- a/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h +++ b/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h @@ -224,7 +224,7 @@ #define LCD_PINS_RS EXP1_05_PIN // = LCD_RESET_PIN #define LCD_PINS_DC EXP1_07_PIN // DC #define DOGLCD_CS EXP1_08_PIN // CS - #define DOGLCD_A0 LCD_PINS_DC // A0 = DC + #define DOGLCD_A0 LCD_PINS_DC #define DOGLCD_MOSI EXP1_10_PIN // SDA #define DOGLCD_SCK EXP1_09_PIN // SCK // Encoder diff --git a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h index 6e9e0e4b4f..af71f0d562 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h @@ -352,9 +352,9 @@ #elif ENABLED(FYSETC_MINI_12864_2_1) + #define LCD_PINS_DC EXP1_07_PIN #define DOGLCD_CS EXP1_08_PIN - #define DOGLCD_A0 EXP1_07_PIN - #define LCD_PINS_DC DOGLCD_A0 + #define DOGLCD_A0 LCD_PINS_DC #define LCD_BACKLIGHT_PIN -1 #define LCD_RESET_PIN EXP1_06_PIN #define NEOPIXEL_PIN EXP1_05_PIN diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h index b892affe68..dee6923076 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h @@ -338,9 +338,9 @@ //#undef SHOW_BOOTSCREEN #elif ENABLED(FYSETC_MINI_12864_2_1) + #define LCD_PINS_DC EXP1_07_PIN #define DOGLCD_CS EXP1_08_PIN - #define DOGLCD_A0 EXP1_07_PIN - #define LCD_PINS_DC DOGLCD_A0 + #define DOGLCD_A0 LCD_PINS_DC #define LCD_BACKLIGHT_PIN -1 #define LCD_RESET_PIN EXP1_06_PIN #define NEOPIXEL_PIN EXP1_05_PIN