Add port for 5DPrint D8 Driver board

Marlin/pins.h

@@ -1,6 +1,7 @@
 #ifndef PINS_H
 #define PINS_H
 
+#if MOTHERBOARD != 88
 #define X_MS1_PIN -1
 #define X_MS2_PIN -1
 #define Y_MS1_PIN -1
@@ -12,6 +13,87 @@
 #define E1_MS1_PIN -1
 #define E1_MS2_PIN -1
 #define DIGIPOTSS_PIN -1
+#endif
+
+/****************************************************************************************
+* 5DPrint D8 Driver board
+* https://bitbucket.org/makible/5dprint-d8-controller-board
+****************************************************************************************/
+
+#if MOTHERBOARD == 88
+
+#define KNOWN_BOARD 1
+#define AT90USB 1286  // Disable MarlinSerial etc.
+
+#ifndef __AVR_AT90USB1286__
+#error Oops!  Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
+#endif
+
+#define LARGE_FLASH        true
+
+#define X_STEP_PIN          0
+#define X_DIR_PIN           1
+#define X_ENABLE_PIN       23
+#define X_STOP_PIN         37
+
+#define Y_STEP_PIN          2
+#define Y_DIR_PIN           3
+#define Y_ENABLE_PIN       19
+#define Y_STOP_PIN         36
+
+#define Z_STEP_PIN          4
+#define Z_DIR_PIN           5
+#define Z_ENABLE_PIN       18
+#define Z_STOP_PIN         39
+
+#define E0_STEP_PIN         6
+#define E0_DIR_PIN          7
+#define E0_ENABLE_PIN      17
+
+#define HEATER_0_PIN       21  // Extruder
+#define HEATER_1_PIN       -1
+#define HEATER_2_PIN       -1
+#define HEATER_BED_PIN     20  // Bed
+#define FAN_PIN            22  // Fan
+// You may need to change FAN_PIN to 16 because Marlin isn't using fastio.h
+// for the fan and Teensyduino uses a different pin mapping.
+
+#define TEMP_0_PIN          1  // Extruder / Analog pin numbering
+#define TEMP_BED_PIN        0  // Bed / Analog pin numbering
+
+#define TEMP_1_PIN         -1
+#define TEMP_2_PIN         -1
+
+#define SDPOWER            -1
+#define SDSS                8
+#define LED_PIN            -1
+#define PS_ON_PIN          -1
+#define KILL_PIN           -1
+#define ALARM_PIN          -1
+
+#ifndef SDSUPPORT
+// these pins are defined in the SD library if building with SD support
+  #define SCK_PIN           9
+  #define MISO_PIN         11
+  #define MOSI_PIN         10
+#endif
+
+// Microstepping pins
+#define X_MS1_PIN 13
+#define X_MS2_PIN 14
+#define Y_MS1_PIN 33
+#define Y_MS2_PIN 32
+#define Z_MS1_PIN 31
+#define Z_MS2_PIN 30
+#define E0_MS1_PIN 29
+#define E0_MS2_PIN 28
+
+#endif /* 88 */
+
+/****************************************************************************************
+*
+*
+****************************************************************************************/
 
 #if MOTHERBOARD == 99
 #define KNOWN_BOARD 1