diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 104bb5a651..6880d7bbea 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/default/Configuration.h b/config/default/Configuration.h index 104bb5a651..6880d7bbea 100644 --- a/config/default/Configuration.h +++ b/config/default/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h index 250b500633..65a26ed0cb 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_BASE_14 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "3DFabXYZ i3" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h index b6465ede96..205509942e 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ b/config/examples/AlephObjects/TAZ4/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMBO #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "TAZ" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h index 210b679b22..26eac786b2 100644 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ b/config/examples/AliExpress/CL-260/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CL-260" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h index 619d2d05ed..96aa4eff71 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ b/config/examples/AliExpress/UM2pExt/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ULTIMAIN_2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h index cc3c3b3f88..8d3536bb65 100644 --- a/config/examples/Anet/A2/Configuration.h +++ b/config/examples/Anet/A2/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ANET_10 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Anet A2" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h index 524e6dd36b..b5bff71183 100644 --- a/config/examples/Anet/A2plus/Configuration.h +++ b/config/examples/Anet/A2plus/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ANET_10 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Anet A2+" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h index ee166cf06a..ccef170d2b 100644 --- a/config/examples/Anet/A6/Configuration.h +++ b/config/examples/Anet/A6/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ANET_10 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Anet A6" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h index 6a3a453c15..6b3d197948 100644 --- a/config/examples/Anet/A8/Configuration.h +++ b/config/examples/Anet/A8/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ANET_10 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Anet A8" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h index 734b5ae718..9e1d2f09ca 100644 --- a/config/examples/Anet/A8plus/Configuration.h +++ b/config/examples/Anet/A8plus/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ANET_10 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Anet A8 plus" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h index aa2dcf9ce7..025d90598e 100644 --- a/config/examples/Anet/E16/Configuration.h +++ b/config/examples/Anet/E16/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ANET_10 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "AnetE16V1.3" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h index 73d78b227f..059af525f4 100644 --- a/config/examples/AnyCubic/i3/Configuration.h +++ b/config/examples/AnyCubic/i3/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Anycubic i3" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h index c0a076fbea..8636e61503 100644 --- a/config/examples/ArmEd/Configuration.h +++ b/config/examples/ArmEd/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ARMED #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h index 15a10d03a5..761215f194 100644 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ b/config/examples/Azteeg/X5GT/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_AZTEEG_X5_GT #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h index 9dc15a8f4e..909668e506 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_L #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "BIBO2 Touch X" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h index 38d98c17b1..772e2f9d56 100644 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ b/config/examples/BIBO/TouchX/default/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_L #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "BIBO2 Touch X" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h index b4712c8ec0..e10fd5ef8c 100644 --- a/config/examples/BQ/Hephestos/Configuration.h +++ b/config/examples/BQ/Hephestos/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "HEPHESTOS" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h index 1b29111f5b..6f85763333 100644 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ b/config/examples/BQ/Hephestos_2/Configuration.h @@ -137,18 +137,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "BQ Hephestos 2" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 #define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config // @section extruder diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h index 4d437167f0..95e8115f26 100644 --- a/config/examples/BQ/WITBOX/Configuration.h +++ b/config/examples/BQ/WITBOX/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "WITBOX" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h index 14174f1b1a..31dc5af3c9 100644 --- a/config/examples/Cartesio/Configuration.h +++ b/config/examples/Cartesio/Configuration.h @@ -129,19 +129,17 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD //#define MOTHERBOARD BOARD_CNCONTROLS_11 #define MOTHERBOARD BOARD_CNCONTROLS_12 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CartesioE" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h index 198048c47c..731ada1495 100644 --- a/config/examples/Creality/CR-10/Configuration.h +++ b/config/examples/Creality/CR-10/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-10" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h index b8ca34864e..202b2c9b95 100644 --- a/config/examples/Creality/CR-10S/Configuration.h +++ b/config/examples/Creality/CR-10S/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-10S" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h index 366a2a1b33..f796aa3e0f 100644 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ b/config/examples/Creality/CR-10_5S/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-10 S5" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h index 45075d1dce..bbdfc548bf 100644 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ b/config/examples/Creality/CR-10mini/Configuration.h @@ -138,18 +138,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-10 Mini" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h index 5cf1bcd7ef..953efe9c8d 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ b/config/examples/Creality/CR-20 Pro/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-20 Pro" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h index 62cfb9cc52..4c06cbb6a1 100644 --- a/config/examples/Creality/CR-20/Configuration.h +++ b/config/examples/Creality/CR-20/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-20" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h index 0a4d7c8ae7..b8dba2df67 100644 --- a/config/examples/Creality/CR-8/Configuration.h +++ b/config/examples/Creality/CR-8/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_ENDER_4 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CR-8" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h index 7869563fa6..0e4f793330 100644 --- a/config/examples/Creality/Ender-2/Configuration.h +++ b/config/examples/Creality/Ender-2/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Ender 3D" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h index f630699aa5..6a08c072b6 100644 --- a/config/examples/Creality/Ender-3/Configuration.h +++ b/config/examples/Creality/Ender-3/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Ender-3" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h index a34cd1bf0e..d515852694 100644 --- a/config/examples/Creality/Ender-4/Configuration.h +++ b/config/examples/Creality/Ender-4/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_ENDER_4 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Ender-4" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h index fefce7f1d1..a86a9708e5 100644 --- a/config/examples/Creality/Ender-5/Configuration.h +++ b/config/examples/Creality/Ender-5/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_CREALITY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Ender-5" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h index 4c91b7ab7a..1ebb50b07d 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_DAGOMA #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "DiscoUltimate" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h index b28e190e53..706089fb4f 100755 --- a/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h +++ b/config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_L #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Sidewinder X1" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h index 6382de9137..29374fa144 100644 --- a/config/examples/Einstart-S/Configuration.h +++ b/config/examples/Einstart-S/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_EINSTART_S #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "The Shining" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Felix/Configuration.h b/config/examples/Felix/Configuration.h index 7128f06502..b6d53dbbb9 100644 --- a/config/examples/Felix/Configuration.h +++ b/config/examples/Felix/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FELIX2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Felix" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h index 3e17ae2a3d..f801c2a48d 100644 --- a/config/examples/Felix/DUAL/Configuration.h +++ b/config/examples/Felix/DUAL/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FELIX2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Felix Dual" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h index 97cd379de9..94df54f5c7 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ b/config/examples/FlashForge/CreatorPro/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CreatorPro" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h index a941d1b895..c8f3bfe9d2 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ b/config/examples/FolgerTech/i3-2020/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "FT-2020 v9" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h index 58d930faab..a403e606d9 100644 --- a/config/examples/Formbot/Raptor/Configuration.h +++ b/config/examples/Formbot/Raptor/Configuration.h @@ -170,18 +170,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FORMBOT_RAPTOR #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "TM3D RaPtOr" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h index 24eb709840..a199072368 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration.h @@ -132,18 +132,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FORMBOT_TREX2PLUS #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "T-Rex 2+" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h index dda12cf8de..423151fa80 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ b/config/examples/Formbot/T_Rex_3/Configuration.h @@ -133,18 +133,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FORMBOT_TREX3 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "T-Rex 3" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Fysetc/AIO_II/Configuration.h b/config/examples/Fysetc/AIO_II/Configuration.h index 49ba200211..92d43b0ab7 100644 --- a/config/examples/Fysetc/AIO_II/Configuration.h +++ b/config/examples/Fysetc/AIO_II/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FYSETC_AIO_II #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Fysetc/CHEETAH/Configuration.h b/config/examples/Fysetc/CHEETAH/Configuration.h index 2f5ab7f9f8..27a2cc2994 100644 --- a/config/examples/Fysetc/CHEETAH/Configuration.h +++ b/config/examples/Fysetc/CHEETAH/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_FYSETC_CHEETAH #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Fysetc/F6_13/Configuration.h b/config/examples/Fysetc/F6_13/Configuration.h index 0d4b179d69..d147620b64 100644 --- a/config/examples/Fysetc/F6_13/Configuration.h +++ b/config/examples/Fysetc/F6_13/Configuration.h @@ -129,20 +129,18 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD //#define MOTHERBOARD BOARD_RAMPS_14_EFB //#define MOTHERBOARD BOARD_FYSETC_AIO_II #define MOTHERBOARD BOARD_FYSETC_F6_13 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h index d7c1d1ecb2..c9f1eef867 100644 --- a/config/examples/Geeetech/A10/Configuration.h +++ b/config/examples/Geeetech/A10/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_V3 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Geeetech A10" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h index eeacfb08a6..f07f45bffc 100644 --- a/config/examples/Geeetech/A10M/Configuration.h +++ b/config/examples/Geeetech/A10M/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_V3 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Geeetech A10M" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h index bebb8e11b7..4187dacd78 100644 --- a/config/examples/Geeetech/A20M/Configuration.h +++ b/config/examples/Geeetech/A20M/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_V3_A20 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Geeetech A20M" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h index 84e1351fcf..62526163e4 100644 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ b/config/examples/Geeetech/GT2560/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_REV_A #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h index eb7ae3aa0a..c6131536f4 100644 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "RdW i3 Pro X" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h index 31efcd76f0..55b4a33265 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ b/config/examples/Geeetech/MeCreator2/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_V3_MC2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "MeCreator2" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index fbf4e8c06c..96e613e439 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "i3 Pro B" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 5b5b6c8fa9..12d7279197 100644 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "i3 Pro B" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h index 0e76e8c697..504e34fd16 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_REV_A #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "i3 Pro C" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h index 28ea50f1e7..0b74d2877a 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "i3 Pro W" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h index d734166768..ef6f904956 100644 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ b/config/examples/Infitary/i3-M508/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Infitary M508" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h index cc6aaa1155..9a1b3c205d 100644 --- a/config/examples/JGAurora/A1/Configuration.h +++ b/config/examples/JGAurora/A1/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_JGAURORA_A5S_A1 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "JGAurora A1" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h index 914f10b18e..38d35512a1 100644 --- a/config/examples/JGAurora/A5/Configuration.h +++ b/config/examples/JGAurora/A5/Configuration.h @@ -134,18 +134,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_L #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "JGAurora A5" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h index 90f7fbc5df..440f91122a 100644 --- a/config/examples/JGAurora/A5S/Configuration.h +++ b/config/examples/JGAurora/A5S/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_JGAURORA_A5S_A1 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "JGAurora A5S" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h index 4524f4a44d..4553972145 100644 --- a/config/examples/MakerParts/Configuration.h +++ b/config/examples/MakerParts/Configuration.h @@ -149,18 +149,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_DUO_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "MakerParts 3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 #define MACHINE_UUID "4250d842-4943-4601-acca-95ef77b8a4f1" // @section extruder diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h index dda5d0b9a6..21360a837c 100644 --- a/config/examples/Malyan/M150/Configuration.h +++ b/config/examples/Malyan/M150/Configuration.h @@ -134,18 +134,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_MALYAN #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Malyan M150" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 #define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h index 2334ffa3b3..d4dde8e9a2 100644 --- a/config/examples/Malyan/M200/Configuration.h +++ b/config/examples/Malyan/M200/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MALYAN_M200 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Malyan M200" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h index ce2bda8575..f9323f729a 100644 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ b/config/examples/Micromake/C1/basic/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MAKEBOARD_MINI #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Micromake C1" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h index 9fd04e2719..7cfb056972 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ b/config/examples/Micromake/C1/enhanced/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MAKEBOARD_MINI #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Micromake C1" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h index 6cd0a71972..6665f5a356 100644 --- a/config/examples/Mks/Robin/Configuration.h +++ b/config/examples/Mks/Robin/Configuration.h @@ -130,18 +130,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_ROBIN #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "MKS Robin" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h index 8966ea2f0f..aadd430991 100644 --- a/config/examples/Mks/Sbase/Configuration.h +++ b/config/examples/Mks/Sbase/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_SBASE #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h index a055280af5..e8d45a23b7 100644 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ b/config/examples/Printrbot/PrintrboardG2/Configuration.h @@ -130,18 +130,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_PRINTRBOARD_G2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h index 1ec97e7f04..9ff0757a9e 100644 --- a/config/examples/RapideLite/RL200/Configuration.h +++ b/config/examples/RapideLite/RL200/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RL200 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Rapide Lite 200" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h index 0b7f6bd8f5..0f25160b4c 100644 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ b/config/examples/RepRapPro/Huxley/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_SANGUINOLOLU_12 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Huxley" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h index 3755b3f8a2..f6fc590759 100644 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ b/config/examples/RepRapWorld/Megatronics/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MEGATRONICS_3 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h index b920f71123..69de1a747c 100644 --- a/config/examples/RigidBot/Configuration.h +++ b/config/examples/RigidBot/Configuration.h @@ -129,8 +129,7 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup // for Rigidbot version 1 : #define MOTHERBOARD BOARD_RIGIDBOARD // for Rigidbot Version 2 : #define MOTHERBOARD BOARD_RIGIDBOARD_V2 @@ -138,12 +137,11 @@ #define MOTHERBOARD BOARD_RIGIDBOARD_V2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Rigidbot" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/SCARA/Configuration.h b/config/examples/SCARA/Configuration.h index a103737cc0..a32290b9ee 100644 --- a/config/examples/SCARA/Configuration.h +++ b/config/examples/SCARA/Configuration.h @@ -156,18 +156,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "SCARA" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h index 6b4f396d93..26c2382aac 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_BLACK_STM32F407VE #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/STM32/STM32F10/Configuration.h b/config/examples/STM32/STM32F10/Configuration.h index d1a96f9f87..8a8892e8c2 100644 --- a/config/examples/STM32/STM32F10/Configuration.h +++ b/config/examples/STM32/STM32F10/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_STM32F1R #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CTC i3 Pro B" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h index 01411bcb0e..38570dd24e 100644 --- a/config/examples/STM32/STM32F4/Configuration.h +++ b/config/examples/STM32/STM32F4/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_STM32F4 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h index cf4f0d221b..b5143c51fc 100644 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ b/config/examples/STM32/stm32f103ret6/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_STM32F1R #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "CTC i3 Pro B" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h index 0ecbd5a08d..1481a21fb8 100644 --- a/config/examples/Sanguinololu/Configuration.h +++ b/config/examples/Sanguinololu/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_SANGUINOLOLU_12 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Sanguinololu" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h index 3cadacdb51..7887d48983 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_L #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Tarantula Pro" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h index 62384c3202..1ab52ef2fc 100644 --- a/config/examples/TheBorg/Configuration.h +++ b/config/examples/TheBorg/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_THE_BORG #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h index 40c1ed6926..198e7db5cf 100644 --- a/config/examples/TinyBoy2/Configuration.h +++ b/config/examples/TinyBoy2/Configuration.h @@ -145,14 +145,12 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #if ENABLED(TB2_L10) #define CUSTOM_MACHINE_NAME "TinyBoy2 L10" #elif ENABLED(TB2_L16) @@ -161,8 +159,8 @@ #error "Please select TB2_L10 or TB2_L16" #endif -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h index 3326f19755..37a55c7f56 100644 --- a/config/examples/Tronxy/X1/Configuration.h +++ b/config/examples/Tronxy/X1/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Tronxy X1" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h index 8e9f67cf74..14123ed127 100644 --- a/config/examples/Tronxy/X3A/Configuration.h +++ b/config/examples/Tronxy/X3A/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI //63 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Tronxy X3A" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h index 945faf48e7..204af78003 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ b/config/examples/Tronxy/X5S-2E/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_TRONXY_V3_1_0 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Tronxy X5S-2E" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h index 54aa2bcf42..789becec22 100644 --- a/config/examples/Tronxy/X5S/Configuration.h +++ b/config/examples/Tronxy/X5S/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI_TRONXY #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Tronxy X5S" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h index bd889c63c8..3cb2ed18b6 100644 --- a/config/examples/Tronxy/XY100/Configuration.h +++ b/config/examples/Tronxy/XY100/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MELZI #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "TronXY XY100" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h index 839964c731..8d0b3736ca 100644 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ b/config/examples/UltiMachine/Archim1/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ARCHIM1 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h index 5f52a50a3f..73fe0f940e 100644 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ b/config/examples/UltiMachine/Archim2/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ARCHIM2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h index 80a7cd2439..60eee38596 100644 --- a/config/examples/VORONDesign/Configuration.h +++ b/config/examples/VORONDesign/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_VORON #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "VORON 2.0" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h index f1edcad865..048d81da78 100644 --- a/config/examples/Velleman/K8200/Configuration.h +++ b/config/examples/Velleman/K8200/Configuration.h @@ -145,18 +145,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_K8200 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "K8200" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 #if ENABLED(K8200_VM8201) #define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display) #else diff --git a/config/examples/Velleman/K8400/Configuration.h b/config/examples/Velleman/K8400/Configuration.h index 698e503306..c9b3f700ef 100644 --- a/config/examples/Velleman/K8400/Configuration.h +++ b/config/examples/Velleman/K8400/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_K8400 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h index f39e7d1b05..b01d0627bb 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_K8400 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h index 0a1daa7fdf..71380f1abd 100644 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ b/config/examples/WASP/PowerWASP/Configuration.h @@ -148,18 +148,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ULTIMAKER #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message -#define CUSTOM_MACHINE_NAME " PowerWASP is " +// Name displayed in the LCD "Ready" message and Info menu +#define CUSTOM_MACHINE_NAME "PowerWASP" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h index 2c83e0706d..82806cb83c 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_ULTIMAIN_2 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Duplicator 6" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h index 76d2b5008d..ce28558294 100755 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_WANHAO_ONEPLUS #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "i3 Mini" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h index 0e3a874b23..0abe473002 100644 --- a/config/examples/adafruit/ST7565/Configuration.h +++ b/config/examples/adafruit/ST7565/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h index 64835b338d..e94a309ae4 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration.h @@ -144,18 +144,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_TRIGORILLA_14 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "ANYCUBIC Kossel" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h index f491aec8d1..eb35ec3410 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "FLSUN Kossel" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h index d164d95909..32cb149a91 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ b/config/examples/delta/FLSUN/kossel/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "FLSUN Kossel" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h index 950060fc75..1d8d292545 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_13_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Mini Kossel" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h index 3c166c989d..ca55a6a8e1 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_GTM32_PRO_VB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Rostock 301" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h index c61251e8c0..4cb0cfa186 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration.h @@ -134,18 +134,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_13 #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Hatchbox Alpha" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h index 927afec023..df0651242c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ b/config/examples/delta/MKS/SBASE/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_SBASE #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Deltabot" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h index c3d3a8e987..c2faf384c5 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ b/config/examples/delta/Tevo Little Monster/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MKS_GEN_L #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "TEVO Little Monster" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h index 590b6739c5..5bd8dd3c3a 100644 --- a/config/examples/delta/generic/Configuration.h +++ b/config/examples/delta/generic/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Deltabot" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h index a5f5c16405..3e7b3429b5 100644 --- a/config/examples/delta/kossel_mini/Configuration.h +++ b/config/examples/delta/kossel_mini/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Mini Kossel" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h index bd216dd36e..ddcc90cbbc 100644 --- a/config/examples/delta/kossel_pro/Configuration.h +++ b/config/examples/delta/kossel_pro/Configuration.h @@ -133,18 +133,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_BRAINWAVE_PRO #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Kossel Pro" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h index 06e7d0c087..dfde4098bc 100644 --- a/config/examples/delta/kossel_xl/Configuration.h +++ b/config/examples/delta/kossel_xl/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "Kossel k800XL" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h index e7cff662dc..d04f5b0259 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ b/config/examples/gCreate/gMax1.5+/Configuration.h @@ -129,8 +129,7 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD //#define MOTHERBOARD BOARD_RAMPS_14_EEF #define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and @@ -140,12 +139,11 @@ // temp. #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "gMax" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h index b6d29d062b..f8ecfa87f3 100644 --- a/config/examples/makibox/Configuration.h +++ b/config/examples/makibox/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_5DPRINT #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu #define CUSTOM_MACHINE_NAME "MakiBox" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h index 06ea6d5990..56d1ff36b9 100644 --- a/config/examples/tvrrug/Round2/Configuration.h +++ b/config/examples/tvrrug/Round2/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_OMCA #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "3D Printer" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" // @section extruder diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h index fc3e858bb1..c2b1e18bf7 100644 --- a/config/examples/wt150/Configuration.h +++ b/config/examples/wt150/Configuration.h @@ -129,18 +129,16 @@ // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH -// The following define selects which electronics board you have. -// Please choose the name from boards.h that matches your setup +// Choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE #endif -// Optional custom name for your RepStrap or other custom machine -// Displayed in the LCD "Ready" message +// Name displayed in the LCD "Ready" message and Info menu //#define CUSTOM_MACHINE_NAME "Weistek WT150" -// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) -// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +// Printer's unique ID, used by some programs to differentiate between machines. +// Choose your own or use a service like http://www.uuidgenerator.net/version4 //#define MACHINE_UUID "5f0bb7a3-0e14-428c-812b-15ab0d3ecc71" // @section extruder