zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge pull request #5244 from thinkyhead/rc_danish_nov_2016

Browse source 
Update to Danish language 10/11-2016
This commit is contained in:
Scott Lahteine 2016-11-18 01:29:25 -06:00 committed by GitHub
parent d08867986e 6eb6f12c64
commit 32247c1b80
11 changed files with 99 additions and 93 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/language_cz.h
View file

@ -188,7 +188,7 @@
#define MSG_INFO_EXTRUDERS "Extrudery"
#define MSG_INFO_BAUDRATE "Rychlost"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Pocet tisku"
#define MSG_INFO_COMPLETED_PRINTS "Dokonceno"
#define MSG_INFO_PRINT_TIME "Celkovy cas"

77
Marlin/language_da.h
View file

@ -31,6 +31,8 @@
#define LANGUAGE_DA_H
#define MAPPER_C2C3
// Define SIMULATE_ROMFONT to see what is seen on the character based display defined in Configuration.h
//#define SIMULATE_ROMFONT
#define DISPLAY_CHARSET_ISO10646_1
#define WELCOME_MSG MACHINE_NAME " er klar"
@ -113,7 +115,7 @@
#define MSG_TEMPERATURE "Temperatur"
#define MSG_MOTION "Bevægelse"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_VOLUMETRIC_ENABLED "E i mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "LCD kontrast"
#define MSG_STORE_EPROM "Gem i EEPROM"
@ -140,13 +142,15 @@
#define MSG_CONTROL_RETRACTF "Tilbagetræk V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Skift UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Skift filament"
#define MSG_INIT_SDCARD "Init. SD card"
#define MSG_CNG_SDCARD "Skift SD kort"
#define MSG_ZPROBE_OUT "Probe udenfor plade"
#define MSG_BLTOUCH_SELFTEST "BLTouch Selv-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "først"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
@ -157,15 +161,16 @@
#define MSG_HEATING_FAILED_LCD "Opvarmning fejlet"
#define MSG_ERR_REDUNDANT_TEMP "Fejl: reserve temp"
#define MSG_THERMAL_RUNAWAY "Temp løber løbsk"
#define MSG_ERR_MAXTEMP "Fejl: MAKSTEMP"
#define MSG_ERR_MINTEMP "Fejl: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Fejl: MAKSTEMP PLADE"
#define MSG_ERR_MINTEMP_BED "Fejl: MINTEMP PLADE"
#define MSG_HALTED "PRINTER HALTED"
#define MSG_PLEASE_RESET "Reset venligst"
#define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_ERR_MAXTEMP "Fejl: Maks temp"
#define MSG_ERR_MINTEMP "Fejl: Min temp"
#define MSG_ERR_MAXTEMP_BED "Fejl: Maks Plade temp"
#define MSG_ERR_MINTEMP_BED "Fejl: Min Plade temp"
#define MSG_ERR_Z_HOMING "G28 Z Forbudt"
#define MSG_HALTED "PRINTER STOPPET"
#define MSG_PLEASE_RESET "Reset Venligst"
#define MSG_SHORT_DAY "d" // Kun et bogstav
#define MSG_SHORT_HOUR "h" // Kun et bogstav
#define MSG_SHORT_MINUTE "m" // Kun et bogstav
#define MSG_HEATING "Opvarmer..."
#define MSG_HEATING_COMPLETE "Opvarmet"
#define MSG_BED_HEATING "Opvarmer plade"
@ -178,19 +183,19 @@
#define MSG_INFO_MENU "Om Printer"
#define MSG_INFO_PRINTER_MENU "Printer Info"
#define MSG_INFO_STATS_MENU "Printer Stat."
#define MSG_INFO_BOARD_MENU "Board Info"
#define MSG_INFO_STATS_MENU "Printer Stats"
#define MSG_INFO_BOARD_MENU "Kort Info"
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
#define MSG_INFO_EXTRUDERS "Extrudere"
#define MSG_INFO_EXTRUDERS "Extruders"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19
#define MSG_INFO_PRINT_COUNT "Antal Print"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Ant. Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
#define MSG_INFO_PRINT_TIME "Total print tid"
#define MSG_INFO_PRINT_LONGEST "Længste print tid"
#define MSG_INFO_PRINT_FILAMENT "Total extruderet"
#define MSG_INFO_PRINT_LONGEST "Længste print"
#define MSG_INFO_PRINT_FILAMENT "Total Extruderet"
#else
#define MSG_INFO_PRINT_COUNT "Prints"
#define MSG_INFO_COMPLETED_PRINTS "Færdige"
@ -201,36 +206,38 @@
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Strømforsyning"
#define MSG_INFO_PSU "Strømfors."
#define MSG_DRIVE_STRENGTH "Driv Styrke"
#define MSG_DAC_PERCENT "Driv %"
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Skriv"
#define MSG_FILAMENT_CHANGE_HEADER "SKIFT FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "SKIFTE MULIGHEDER:"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "Skift muligheder:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruder mere"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "forsæt print"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Forsæt print"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent på"
#define MSG_FILAMENT_CHANGE_INIT_2 "skift af "
#define MSG_FILAMENT_CHANGE_INIT_3 "filament"
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent på start"
#define MSG_FILAMENT_CHANGE_INIT_2 "af filament"
#define MSG_FILAMENT_CHANGE_INIT_3 "skift"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament tømning"
#define MSG_FILAMENT_CHANGE_INSERT_1 "indsæt filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk for"
#define MSG_FILAMENT_CHANGE_INSERT_3 "at fortsætte..."
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament udskyd."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "og tryk på knap"
#define MSG_FILAMENT_CHANGE_INSERT_3 "for at fortsætte..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Vent på"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament fødning"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament indtag"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Vent på"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudere"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at"
#define MSG_FILAMENT_CHANGE_RESUME_2 "print forsætter"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrudering"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Vent på at print"
#define MSG_FILAMENT_CHANGE_RESUME_2 "fortsætter"
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Vent venligst..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Tømmer..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Udskyder..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Indsæt og klik"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Føder..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Indtager..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudere..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Fortsætter..."
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_DA_H

2
Marlin/language_de.h
View file

@ -185,7 +185,7 @@
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Gesamte Drucke"
#define MSG_INFO_COMPLETED_PRINTS "Beendete Drucke"
#define MSG_INFO_PRINT_TIME "Gesamte Druckzeit"

2
Marlin/language_el.h
View file

@ -180,7 +180,7 @@
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Print Count"
#define MSG_INFO_COMPLETED_PRINTS "Completed "
#define MSG_INFO_PRINT_TIME "Total Time "

2
Marlin/language_en.h
View file

@ -488,7 +488,7 @@
#define MSG_INFO_PROTOCOL "Protocol"
#endif
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT "Print Count"
#endif

3
Marlin/language_fr.h
View file

@ -188,8 +188,7 @@
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocole"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Nbre impressions"
#define MSG_INFO_COMPLETED_PRINTS "Terminees"
#define MSG_INFO_PRINT_TIME "Tps impr. total"

2
Marlin/language_gl.h
View file

@ -182,7 +182,7 @@
#define MSG_INFO_EXTRUDERS "Extrusores"
#define MSG_INFO_BAUDRATE "Baudios"
#define MSG_INFO_PROTOCOL "Protocolo"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Total traballos"
#define MSG_INFO_COMPLETED_PRINTS "Total completos"
#define MSG_INFO_PRINT_TIME "Tempo impresion"

2
Marlin/language_it.h
View file

@ -190,7 +190,7 @@
#define MSG_INFO_EXTRUDERS "Estrusori"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protocollo"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Contat. stampa"
#define MSG_INFO_COMPLETED_PRINTS "Completati"
#define MSG_INFO_PRINT_TIME "Tempo totale"

26
Marlin/language_kana.h
View file

@ -89,7 +89,7 @@
#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " ｻｲﾃｲ" (" Min")
#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " ｻｲｺｳ" (" Max")
#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " ﾌｧｸﾀｰ" (" Fact")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde\xbe\xb2\xb7\xde\xae" // "ｼﾞﾄﾞｳｵﾝﾄﾞｾｲｷﾞｮ" ("Autotemp")
#else
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "ｼﾞﾄﾞｳｵﾝﾄﾞ" ("Autotemp")
@ -101,7 +101,7 @@
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_SELECT "\xbe\xdd\xc0\xb8" // "ｾﾝﾀｸ" ("Select")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s2" // "ｶｿｸﾄﾞ mm/s2" ("Accel")
#define MSG_VX_JERK "X\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Xｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vx-jerk")
#define MSG_VY_JERK "Y\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Yｼﾞｸ ﾔｸﾄﾞ mm/s" ("Vy-jerk")
@ -132,7 +132,7 @@
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "ｳｺﾞｷｾｯﾃｲ" ("Motion")
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "ﾌｨﾗﾒﾝﾄ" ("Filament")
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "ﾌｨﾗﾒﾝﾄﾁｮｯｹｲ" ("Fil. Dia.")
#else
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｹｲ" ("Fil. Dia.")
@ -157,7 +157,7 @@
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "ｳｺﾞｷﾏｾﾝ" ("No move.")
#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "ﾋｼﾞｮｳﾃｲｼ" ("KILLED. ")
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "ﾃｲｼｼﾏｼﾀ" ("STOPPED. ")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "ﾋｷｺﾐﾘｮｳ mm" ("Retract mm")
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "ﾋｷｺﾐﾘｮｳS mm" ("Swap Re.mm")
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xbf\xb8\xc4\xde mm/s" // "ﾋｷｺﾐｿｸﾄﾞ mm/s" ("Retract V")
@ -179,14 +179,14 @@
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "SDｶｰﾄﾞｻｲﾖﾐｺﾐ" ("Init. SD card")
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "SDｶｰﾄﾞｺｳｶﾝ" ("Change SD card")
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Zﾌﾟﾛｰﾌﾞ ﾍﾞｯﾄﾞｶﾞｲ" ("Z probe out. bed")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbc\xde\xba\xbc\xdd\xc0\xde\xdd" // "BLTouch ｼﾞｺｼﾝﾀﾞﾝ" ("BLTouch Self-Test")
#else
#define MSG_BLTOUCH_SELFTEST "BLTouch \xbe\xd9\xcc\xc3\xbd\xc4" // "BLTouch ｾﾙﾌﾃｽﾄ" ("BLTouch Self-Test")
#endif
#define MSG_BLTOUCH_RESET "BLTouch \xd8\xbe\xaf\xc4" // "BLTouch ﾘｾｯﾄ" ("Reset BLTouch")
#define MSG_HOME "\xbb\xb7\xc6" // "ｻｷﾆ" ("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xc3\xb8\xc0\xde\xbb\xb2" // "ｦﾌｯｷｻｾﾃｸﾀﾞｻｲ" ("first")
#else
#define MSG_FIRST "\xa6\xcc\xaf\xb7\xbb\xbe\xd6" // "ｦﾌｯｷｻｾﾖ" ("first")
@ -195,13 +195,13 @@
#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Xｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep X")
#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Yｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Y")
#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Zｼﾞｸ ﾋﾞﾄﾞｳ" ("Babystep Z")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1\xb7\xc9\xb3" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁｷﾉｳ" ("Endstop abort")
#else
#define MSG_ENDSTOP_ABORT "\xb2\xc4\xde\xb3\xb9\xde\xdd\xb6\xb2\xb9\xdd\xc1" // "ｲﾄﾞｳｹﾞﾝｶｲｹﾝﾁ" ("Endstop abort")
#endif
#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xdf\xb2" // "ｶﾈﾂｼｯﾊﾟｲ" ("Heating failed")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀｰｷﾉｳ" ("Err: REDUNDANT TEMP")
#else
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0" // "ｴﾗｰ:ｼﾞｮｳﾁｮｳｻｰﾐｽﾀ" ("Err: REDUNDANT TEMP")
@ -209,7 +209,7 @@
#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "ﾈﾂﾎﾞｳｿｳ" ("THERMAL RUNAWAY")
#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP")
#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲｺｳｵﾝﾁｮｳｶ" ("Err: MAXTEMP BED")
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "ｴﾗｰ:ﾍﾞｯﾄﾞ ｻｲﾃｲｵﾝﾐﾏﾝ" ("Err: MINTEMP BED")
#else
@ -243,20 +243,20 @@
#define MSG_INFO_COMPLETED_PRINTS "\xb6\xdd\xd8\xae\xb3\xbd\xb3" // "ｶﾝﾘｮｳｽｳ" ("Completed")
#define MSG_INFO_PRINT_TIME "\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd\xd9\xb2\xb9\xb2" // "ﾌﾟﾘﾝﾄｼﾞｶﾝﾙｲｹｲ" ("Total print time")
#define MSG_INFO_PRINT_LONGEST "\xbb\xb2\xc1\xae\xb3\xcc\xdf\xd8\xdd\xc4\xbc\xde\xb6\xdd" // "ｻｲﾁｮｳﾌﾟﾘﾝﾄｼﾞｶﾝ" ("Longest job time")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbc\xd6\xb3\xd8\xae\xb3\xd9\xb2\xb9\xb2" // "ﾌｨﾗﾒﾝﾄｼﾖｳﾘｮｳﾙｲｹｲ" ("Extruded total")
#else
#define MSG_INFO_PRINT_FILAMENT "\xcc\xa8\xd7\xd2\xdd\xc4\xbf\xb3\xbc\xd6\xb3\xd8\xae\xb3" // "ﾌｨﾗﾒﾝﾄｿｳｼﾖｳﾘｮｳ" ("Extruded")
#endif
#define MSG_INFO_MIN_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xc3\xb2\xb5\xdd" // "ｾｯﾃｲｻｲﾃｲｵﾝ" ("Min Temp")
#define MSG_INFO_MAX_TEMP "\xbe\xaf\xc3\xb2\xbb\xb2\xba\xb3\xb5\xdd" // "ｾｯﾃｲｻｲｺｳｵﾝ" ("Max Temp")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd\xbc\xad\xcd\xde\xc2" // "ﾃﾞﾝｹﾞﾝｼｭﾍﾞﾂ" ("Power Supply")
#else
#define MSG_INFO_PSU "\xc3\xde\xdd\xb9\xde\xdd" // "ﾃﾞﾝｹﾞﾝ" ("Power Supply")
#endif
#define MSG_DRIVE_STRENGTH "\xd3\xb0\xc0\xb0\xb8\xc4\xde\xb3\xd8\xae\xb8" // "ﾓｰﾀｰｸﾄﾞｳﾘｮｸ" ("Drive Strength")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8 %" // "DACｼｭﾂﾘｮｸ %" ("Driver %")
#else
#define MSG_DAC_PERCENT "DAC\xbc\xad\xc2\xd8\xae\xb8" // "DACｼｭﾂﾘｮｸ" ("Driver %")
@ -288,7 +288,7 @@
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "\xba\xb3\xb6\xdd\xa6\xb6\xb2\xbc\xbc\xcf\xbd" // "ｺｳｶﾝｦｶｲｼｼﾏｽ" ("Please wait...")
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "\xcc\xa8\xd7\xd2\xdd\xc4\xc7\xb7\xc0\xde\xbc\xc1\xad\xb3" // "ﾌｨﾗﾒﾝﾄﾇｷﾀﾞｼﾁｭｳ" ("Ejecting...")
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbc\xc3\xb8\xc0\xde\xbb\xb2" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｼﾃｸﾀﾞｻｲ" ("Insert and Click")
#else
#define MSG_FILAMENT_CHANGE_INSERT_1 "\xbf\xb3\xc6\xad\xb3\xbc\x2c\xb8\xd8\xaf\xb8\xbe\xd6" // "ｿｳﾆｭｳｼ,ｸﾘｯｸｾﾖ" ("Insert and Click")

2
Marlin/language_tr.h
View file

@ -186,7 +186,7 @@
#define MSG_INFO_BAUDRATE "\xddleti\xfeim H\xfdz\xfd"
#define MSG_INFO_PROTOCOL "Protokol"
#if LCD_WIDTH > 19
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Bask\xfd Say\xfds\xfd"
#define MSG_INFO_COMPLETED_PRINTS "Tamamlanan"
#define MSG_INFO_PRINT_TIME "Toplam Bask\xfd S\xfcresi"

4
Marlin/ultralcd_impl_HD44780.h
View file

@ -721,7 +721,7 @@ static void lcd_implementation_status_screen() {
lcd.print(itostr3(feedrate_percentage));
lcd.print('%');
#if LCD_WIDTH > 19 && ENABLED(SDSUPPORT)
#if LCD_WIDTH >= 20 && ENABLED(SDSUPPORT)
lcd.setCursor(7, 2);
lcd_printPGM(PSTR("SD"));
@ -731,7 +731,7 @@ static void lcd_implementation_status_screen() {
lcd_printPGM(PSTR("---"));
lcd.print('%');
#endif // LCD_WIDTH > 19 && SDSUPPORT
#endif // LCD_WIDTH >= 20 && SDSUPPORT
lcd.setCursor(LCD_WIDTH - 6, 2);
lcd.print(LCD_STR_CLOCK[0]);