zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Proceed with Teensy 3.5/3.6 HAL (#13450)

Browse source
This commit is contained in:
Scott Alfter 2019-03-23 22:08:32 -07:00 committed by Scott Lahteine
parent 407202cc0f
commit 32332bcd03
2 changed files with 9 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

3
Marlin/src/HAL/HAL_TEENSY35_36/HAL.h
View file

@ -58,9 +58,6 @@
// Defines
// --------------------------------------------------------------------------
#undef MOTHERBOARD
#define MOTHERBOARD BOARD_TEENSY35_36
#define IS_32BIT_TEENSY (defined(__MK64FX512__) || defined(__MK66FX1M0__))
#define IS_TEENSY35 defined(__MK64FX512__)
#define IS_TEENSY36 defined(__MK66FX1M0__)

9
buildroot/share/tests/teensy35-tests
View file

@ -15,6 +15,7 @@ exec_test $1 $2 "Teensy3.5 with default config"
# Test as many features together as possible
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_0 1
opt_set TEMP_SENSOR_1 5
@ -35,6 +36,7 @@ exec_test $1 $2 "Teensy3.5 with many features"
# Test a Sled Z Probe with Linear leveling
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable EEPROM_SETTINGS Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE GCODE_MACROS
exec_test $1 $2 "Sled Z Probe with Linear leveling"
@ -42,6 +44,7 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
# Test a Servo Probe
#
# restore_configs
# opt_set MOTHERBOARD BOARD_TEENSY35_36
# opt_enable Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE \
# AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS
# opt_set NUM_SERVOS 1
@ -57,6 +60,7 @@ exec_test $1 $2 "Sled Z Probe with Linear leveling"
# Test MAGNETIC_PARKING_EXTRUDER with LCD
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_set EXTRUDERS 2
opt_set TEMP_SENSOR_1 1
opt_enable MAGNETIC_PARKING_EXTRUDER ULTIMAKERCONTROLLER
@ -66,6 +70,7 @@ exec_test $1 $2 "MAGNETIC_PARKING_EXTRUDER with LCD"
# Mixing Extruder
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable MIXING_EXTRUDER DIRECT_MIXING_IN_G1 GRADIENT_MIX GRADIENT_VTOOL REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_set MIXING_STEPPERS 2
exec_test $1 $2 "Mixing Extruder"
@ -74,6 +79,7 @@ exec_test $1 $2 "Mixing Extruder"
# Test SWITCHING_EXTRUDER
#
# restore_configs
# opt_set MOTHERBOARD BOARD_TEENSY35_36
# opt_set EXTRUDERS 2
# opt_set NUM_SERVOS 1
# opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
@ -82,6 +88,7 @@ exec_test $1 $2 "Mixing Extruder"
# Enable COREXY
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable COREXY
exec_test $1 $2 "COREXY"
@ -89,6 +96,7 @@ exec_test $1 $2 "COREXY"
# Enable COREXZ
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable COREXZ
exec_test $1 $2 "COREXZ"
@ -96,6 +104,7 @@ exec_test $1 $2 "COREXZ"
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
#
restore_configs
opt_set MOTHERBOARD BOARD_TEENSY35_36
opt_enable Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
pins_set RAMPS X_MAX_PIN -1
opt_add Z2_MAX_PIN 2