zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Hephestos config updates (#10960)

Browse source
This commit is contained in:
Scott Lahteine 2018-06-07 21:23:55 -05:00 committed by GitHub
parent f74278b8b1
commit 334341c632
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
7 changed files with 178 additions and 230 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

102
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -342,7 +342,7 @@
#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. #define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
// Bed temperature must be close to target for this long before M190 returns success // Bed temperature must be close to target for this long before M190 returns success
#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) #define TEMP_BED_RESIDENCY_TIME 10 // (seconds)
#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one #define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. #define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
@ -359,12 +359,12 @@
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection. // You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 230
#define HEATER_1_MAXTEMP 275 #define HEATER_1_MAXTEMP 275
#define HEATER_2_MAXTEMP 275 #define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275 #define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275 #define HEATER_4_MAXTEMP 275
#define BED_MAXTEMP 110 #define BED_MAXTEMP 100
//=========================================================================== //===========================================================================
//============================= PID Settings ================================ //============================= PID Settings ================================
@ -383,13 +383,13 @@
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2] // Set/get with gcode: M301 E[extruder number, 0-2]
#define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
// Tuned PID values using M303 // Tuned PID values using M303
#define DEFAULT_Kp 19.18 #define DEFAULT_Kp 23.75
#define DEFAULT_Ki 1.36 #define DEFAULT_Ki 2.12
#define DEFAULT_Kd 67.42 #define DEFAULT_Kd 66.63
// BQ firmware stock PID values // BQ firmware stock PID values
//#define DEFAULT_Kp 10.7 //#define DEFAULT_Kp 10.7
@ -597,14 +597,14 @@
* Override with M92 * Override with M92
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 210.02 } #define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 }
/** /**
* Default Max Feed Rate (mm/s) * Default Max Feed Rate (mm/s)
* Override with M203 * Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_FEEDRATE { 167, 167, 3.3, 167 } #define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 }
/** /**
* Default Max Acceleration (change/s) change = mm/s * Default Max Acceleration (change/s) change = mm/s
@ -612,7 +612,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
*/ */
#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 3000 } #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 }
/** /**
* Default Acceleration (change/s) change = mm/s * Default Acceleration (change/s) change = mm/s
@ -622,9 +622,9 @@
* M204 R Retract Acceleration * M204 R Retract Acceleration
* M204 T Travel Acceleration * M204 T Travel Acceleration
*/ */
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves #define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
/** /**
* Default Jerk (mm/s) * Default Jerk (mm/s)
@ -634,10 +634,10 @@
* When changing speed and direction, if the difference is less than the * When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#define DEFAULT_XJERK 10.0 #define DEFAULT_XJERK 5.0
#define DEFAULT_YJERK 10.0 #define DEFAULT_YJERK 5.0
#define DEFAULT_ZJERK 0.3 #define DEFAULT_ZJERK 0.3
#define DEFAULT_EJERK 1.0 #define DEFAULT_EJERK 10.0
/** /**
* S-Curve Acceleration * S-Curve Acceleration
@ -766,7 +766,7 @@
*/ */
#define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle]
#define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle]
#define Z_PROBE_OFFSET_FROM_EXTRUDER -4 // Z offset: -below +above [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
// Certain types of probes need to stay away from edges // Certain types of probes need to stay away from edges
#define MIN_PROBE_EDGE 10 #define MIN_PROBE_EDGE 10
@ -801,16 +801,16 @@
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points
//#define Z_AFTER_PROBING 2 // Z position after probing is done //#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -5.5 #define Z_PROBE_OFFSET_RANGE_MIN -20
#define Z_PROBE_OFFSET_RANGE_MAX -3 #define Z_PROBE_OFFSET_RANGE_MAX 20
// Enable the M48 repeatability test to test probe accuracy // Enable the M48 repeatability test to test probe accuracy
#define Z_MIN_PROBE_REPEATABILITY_TEST //#define Z_MIN_PROBE_REPEATABILITY_TEST
// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
// :{ 0:'Low', 1:'High' } // :{ 0:'Low', 1:'High' }
@ -853,11 +853,11 @@
// @section homing // @section homing
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed #define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
#define Z_HOMING_HEIGHT 5 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... //#define Z_HOMING_HEIGHT 3 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
// Be sure you have this distance over your Z_MAX_POS in case. // Be sure you have this distance over your Z_MAX_POS in case.
// Direction of endstops when homing; 1=MAX, -1=MIN // Direction of endstops when homing; 1=MAX, -1=MIN
@ -922,7 +922,6 @@
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
#define FILAMENT_RUNOUT_SCRIPT "M600" #define FILAMENT_RUNOUT_SCRIPT "M600"
#endif #endif
@ -1002,8 +1001,8 @@
#if ENABLED(G26_MESH_VALIDATION) #if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. #define MESH_TEST_HOTEND_TEMP 185.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. #define MESH_TEST_BED_TEMP 50.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#endif #endif
#endif #endif
@ -1011,8 +1010,8 @@
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension. // Set the number of grid points per dimension.
#define GRID_MAX_POINTS_X 3 #define GRID_MAX_POINTS_X 5
#define GRID_MAX_POINTS_Y 4 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
// Set the boundaries for probing (where the probe can reach). // Set the boundaries for probing (where the probe can reach).
//#define LEFT_PROBE_BED_POSITION X_MIN_POS + (X_PROBE_OFFSET_FROM_EXTRUDER) //#define LEFT_PROBE_BED_POSITION X_MIN_POS + (X_PROBE_OFFSET_FROM_EXTRUDER)
@ -1027,7 +1026,7 @@
// Beyond the probed grid, continue the implied tilt? // Beyond the probed grid, continue the implied tilt?
// Default is to maintain the height of the nearest edge. // Default is to maintain the height of the nearest edge.
//#define EXTRAPOLATE_BEYOND_GRID #define EXTRAPOLATE_BEYOND_GRID
// //
// Experimental Subdivision of the grid by Catmull-Rom method. // Experimental Subdivision of the grid by Catmull-Rom method.
@ -1041,17 +1040,6 @@
#endif #endif
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
// 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed.
#define PROBE_PT_1_X X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER
#define PROBE_PT_1_Y Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER
#define PROBE_PT_2_X X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER)
#define PROBE_PT_2_Y Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER
#define PROBE_PT_3_X ((X_MIN_POS + X_MAX_POS) / 2)
#define PROBE_PT_3_Y Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER)
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
//=========================================================================== //===========================================================================
@ -1120,7 +1108,7 @@
* Commands to execute at the end of G29 probing. * Commands to execute at the end of G29 probing.
* Useful to retract or move the Z probe out of the way. * Useful to retract or move the Z probe out of the way.
*/ */
//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" #define Z_PROBE_END_SCRIPT "G27 P0"
// @section homing // @section homing
@ -1151,8 +1139,8 @@
#endif #endif
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (60*60) #define HOMING_FEEDRATE_XY (50*60)
#define HOMING_FEEDRATE_Z 120 #define HOMING_FEEDRATE_Z ( 4*60)
// @section calibrate // @section calibrate
@ -1236,7 +1224,7 @@
// every couple of seconds when it can't accept commands. // every couple of seconds when it can't accept commands.
// //
#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
#define DEFAULT_KEEPALIVE_INTERVAL 10 // Number of seconds between "busy" messages. Set with M113. #define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113.
#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
// //
@ -1257,12 +1245,12 @@
// @section temperature // @section temperature
// Preheat Constants // Preheat Constants
#define PREHEAT_1_TEMP_HOTEND 205 #define PREHEAT_1_TEMP_HOTEND 180
#define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_TEMP_BED 50
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_TEMP_HOTEND 245 #define PREHEAT_2_TEMP_HOTEND 210
#define PREHEAT_2_TEMP_BED 50 #define PREHEAT_2_TEMP_BED 60
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
/** /**
@ -1323,7 +1311,7 @@
* Attention: EXPERIMENTAL. G-code arguments may change. * Attention: EXPERIMENTAL. G-code arguments may change.
* *
*/ */
#define NOZZLE_CLEAN_FEATURE //#define NOZZLE_CLEAN_FEATURE
#if ENABLED(NOZZLE_CLEAN_FEATURE) #if ENABLED(NOZZLE_CLEAN_FEATURE)
// Default number of pattern repetitions // Default number of pattern repetitions
@ -1333,8 +1321,8 @@
#define NOZZLE_CLEAN_TRIANGLES 3 #define NOZZLE_CLEAN_TRIANGLES 3
// Specify positions as { X, Y, Z } // Specify positions as { X, Y, Z }
#define NOZZLE_CLEAN_START_POINT { X_MIN_POS + 10, Y_MAX_POS - 9, (Z_MIN_POS + 0.5)} #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
#define NOZZLE_CLEAN_END_POINT { X_MIN_POS + 90, Y_MAX_POS - 0, (Z_MIN_POS + 0.5)} #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
// Circular pattern radius // Circular pattern radius
#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
@ -1344,7 +1332,7 @@
#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
// Moves the nozzle to the initial position // Moves the nozzle to the initial position
//#define NOZZLE_CLEAN_GOBACK #define NOZZLE_CLEAN_GOBACK
#endif #endif
/** /**
@ -1445,7 +1433,7 @@
* *
* Use CRC checks and retries on the SD communication. * Use CRC checks and retries on the SD communication.
*/ */
#define SD_CHECK_AND_RETRY //#define SD_CHECK_AND_RETRY
/** /**
* LCD Menu Items * LCD Menu Items
@ -1462,13 +1450,13 @@
// This option overrides the default number of encoder pulses needed to // This option overrides the default number of encoder pulses needed to
// produce one step. Should be increased for high-resolution encoders. // produce one step. Should be increased for high-resolution encoders.
// //
//#define ENCODER_PULSES_PER_STEP 4 #define ENCODER_PULSES_PER_STEP 1
// //
// Use this option to override the number of step signals required to // Use this option to override the number of step signals required to
// move between next/prev menu items. // move between next/prev menu items.
// //
//#define ENCODER_STEPS_PER_MENU_ITEM 1 #define ENCODER_STEPS_PER_MENU_ITEM 5
/** /**
* Encoder Direction Options * Encoder Direction Options
@ -1818,7 +1806,7 @@
// @section extras // @section extras
// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
//#define FAST_PWM_FAN #define FAST_PWM_FAN
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency

80
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
View file

@ -172,10 +172,10 @@
// Extruder runout prevention. // Extruder runout prevention.
// If the machine is idle and the temperature over MINTEMP // If the machine is idle and the temperature over MINTEMP
// then extrude some filament every couple of SECONDS. // then extrude some filament every couple of SECONDS.
#define EXTRUDER_RUNOUT_PREVENT //#define EXTRUDER_RUNOUT_PREVENT
#if ENABLED(EXTRUDER_RUNOUT_PREVENT) #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
#define EXTRUDER_RUNOUT_MINTEMP 170 #define EXTRUDER_RUNOUT_MINTEMP 190
#define EXTRUDER_RUNOUT_SECONDS 60 #define EXTRUDER_RUNOUT_SECONDS 30
#define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m
#define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm
#endif #endif
@ -206,7 +206,7 @@
// When first starting the main fan, run it at full speed for the // When first starting the main fan, run it at full speed for the
// given number of milliseconds. This gets the fan spinning reliably // given number of milliseconds. This gets the fan spinning reliably
// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
//#define FAN_KICKSTART_TIME 100 #define FAN_KICKSTART_TIME 800
/** /**
* PWM Fan Scaling * PWM Fan Scaling
@ -379,7 +379,7 @@
// Homing hits each endstop, retracts by these distances, then does a slower bump. // Homing hits each endstop, retracts by these distances, then does a slower bump.
#define X_HOME_BUMP_MM 5 #define X_HOME_BUMP_MM 5
#define Y_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5
#define Z_HOME_BUMP_MM 2 #define Z_HOME_BUMP_MM 1
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially #define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
@ -405,10 +405,10 @@
// Default stepper release if idle. Set to 0 to deactivate. // Default stepper release if idle. Set to 0 to deactivate.
// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
// Time can be set by M18 and M84. // Time can be set by M18 and M84.
#define DEFAULT_STEPPER_DEACTIVE_TIME 120 #define DEFAULT_STEPPER_DEACTIVE_TIME 300
#define DISABLE_INACTIVE_X true #define DISABLE_INACTIVE_X false
#define DISABLE_INACTIVE_Y true #define DISABLE_INACTIVE_Y false
#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_Z false // set to false if the nozzle will fall down on your printed part when print has finished.
#define DISABLE_INACTIVE_E true #define DISABLE_INACTIVE_E true
#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
@ -419,7 +419,7 @@
// @section lcd // @section lcd
#if ENABLED(ULTIPANEL) #if ENABLED(ULTIPANEL)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
//#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif #endif
@ -474,7 +474,15 @@
* M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
*/ */
//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
#define DIGIPOT_MOTOR_CURRENT { 150, 170, 180, 190, 180 } // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A])
#define DIGIPOT_MOTOR_CURRENT { 170, 170, 180, 190, 180 } // Values 0-255
//
// bq ZUM Mega 3D defaults:
// X = 150 [~1.17A]
// Y = 170 [~1.33A]
// Z = 180 [~1.41A]
// E0 = 190 [~1.49A]
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) // Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
@ -502,17 +510,17 @@
//=============================Additional Features=========================== //=============================Additional Features===========================
//=========================================================================== //===========================================================================
//#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly #define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
//#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value #define ENCODER_10X_STEPS_PER_SEC 30 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
//#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value #define ENCODER_100X_STEPS_PER_SEC 50 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ //#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
//#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again #define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
// @section lcd // @section lcd
// Include a page of printer information in the LCD Main Menu // Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU //#define LCD_INFO_MENU
// Scroll a longer status message into view // Scroll a longer status message into view
#define STATUS_MESSAGE_SCROLLING #define STATUS_MESSAGE_SCROLLING
@ -521,7 +529,7 @@
#define LCD_DECIMAL_SMALL_XY #define LCD_DECIMAL_SMALL_XY
// The timeout (in ms) to return to the status screen from sub-menus // The timeout (in ms) to return to the status screen from sub-menus
//#define LCD_TIMEOUT_TO_STATUS 15000 #define LCD_TIMEOUT_TO_STATUS 60000
// Add an 'M73' G-code to set the current percentage // Add an 'M73' G-code to set the current percentage
//#define LCD_SET_PROGRESS_MANUALLY //#define LCD_SET_PROGRESS_MANUALLY
@ -563,8 +571,8 @@
// Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
#define SD_DETECT_INVERTED #define SD_DETECT_INVERTED
#define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished
#define SD_FINISHED_RELEASECOMMAND "M104 S0\nM84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. #define SD_FINISHED_RELEASECOMMAND "G27 P0" // You might want to keep the z enabled so your bed stays in place.
// Reverse SD sort to show "more recent" files first, according to the card's FAT. // Reverse SD sort to show "more recent" files first, according to the card's FAT.
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
@ -622,7 +630,7 @@
#endif #endif
// This allows hosts to request long names for files and folders with M33 // This allows hosts to request long names for files and folders with M33
#define LONG_FILENAME_HOST_SUPPORT //#define LONG_FILENAME_HOST_SUPPORT
// Enable this option to scroll long filenames in the SD card menu // Enable this option to scroll long filenames in the SD card menu
//#define SCROLL_LONG_FILENAMES //#define SCROLL_LONG_FILENAMES
@ -665,18 +673,18 @@
//#define DOGM_SD_PERCENT //#define DOGM_SD_PERCENT
// Enable to save many cycles by drawing a hollow frame on the Info Screen // Enable to save many cycles by drawing a hollow frame on the Info Screen
#define XYZ_HOLLOW_FRAME //#define XYZ_HOLLOW_FRAME
// Enable to save many cycles by drawing a hollow frame on Menu Screens // Enable to save many cycles by drawing a hollow frame on Menu Screens
#define MENU_HOLLOW_FRAME #define MENU_HOLLOW_FRAME
// A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
#define USE_BIG_EDIT_FONT //#define USE_BIG_EDIT_FONT
// A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
#define USE_SMALL_INFOFONT //#define USE_SMALL_INFOFONT
// Enable this option and reduce the value to optimize screen updates. // Enable this option and reduce the value to optimize screen updates.
// The normal delay is 10µs. Use the lowest value that still gives a reliable display. // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
@ -728,16 +736,16 @@
* *
* Warning: Does not respect endstops! * Warning: Does not respect endstops!
*/ */
//#define BABYSTEPPING #define BABYSTEPPING
#if ENABLED(BABYSTEPPING) #if ENABLED(BABYSTEPPING)
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion.
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency. // Note: Extra time may be added to mitigate controller latency.
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
#endif #endif
// @section extruder // @section extruder
@ -803,7 +811,7 @@
// //
// G2/G3 Arc Support // G2/G3 Arc Support
// //
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes //#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
#if ENABLED(ARC_SUPPORT) #if ENABLED(ARC_SUPPORT)
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
#define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
@ -843,7 +851,7 @@
// The number of linear motions that can be in the plan at any give time. // The number of linear motions that can be in the plan at any give time.
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
#if ENABLED(SDSUPPORT) #if ENABLED(SDSUPPORT)
#define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
#else #else
#define BLOCK_BUFFER_SIZE 64 // maximize block buffer #define BLOCK_BUFFER_SIZE 64 // maximize block buffer
#endif #endif
@ -889,13 +897,13 @@
// enter the serial receive buffer, so they cannot be blocked. // enter the serial receive buffer, so they cannot be blocked.
// Currently handles M108, M112, M410 // Currently handles M108, M112, M410
// Does not work on boards using AT90USB (USBCON) processors! // Does not work on boards using AT90USB (USBCON) processors!
#define EMERGENCY_PARSER //#define EMERGENCY_PARSER
// Bad Serial-connections can miss a received command by sending an 'ok' // Bad Serial-connections can miss a received command by sending an 'ok'
// Therefore some clients abort after 30 seconds in a timeout. // Therefore some clients abort after 30 seconds in a timeout.
// Some other clients start sending commands while receiving a 'wait'. // Some other clients start sending commands while receiving a 'wait'.
// This "wait" is only sent when the buffer is empty. 1 second is a good value here. // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
//#define NO_TIMEOUTS 1000 // Milliseconds #define NO_TIMEOUTS 1000 // Milliseconds
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
#define ADVANCED_OK #define ADVANCED_OK

33
Marlin/src/config/examples/BQ/Hephestos_2/README.md
View file

@ -1,22 +1,29 @@
# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2) # Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at [BQ Github repository](https://github.com/bq/Marlin). Based on the original configuration file shipped with the heavily modified Marlin fork by BQ.
The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin).
NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware. NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware.
## Changelog ## Changelog
* 2016/03/01 - Initial release * 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af).
ABL Bilinear 5x5 is active by default.
* 2016/03/21 - Activated 4-point auto leveling by default * 2017/07/06 - Configuration updated to the latest Marlin version and added support for the
Updated miscellaneous z-probe values official BQ heated bed upgrade kit.
* 2016/06/21 - Disabled hot bed related options * 2016/12/13 - Configuration updated to the latest Marlin version.
Activated software endstops
SD printing now disables the heater when finished
* 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis * 2016/07/13 - Configuration updated to the latest Marlin version.
Increased the `DEFAULT_XYJERK`
* 2016/12/13 - Configuration updated. * 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now
disables the heater when finishes printing.
* 2017/07/06 - Configuration updated to the latest Marlin version. * 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values.
Added support for the official BQ heated bed kit.
* 2016/03/01 - The first release of Marlin's configuration file for the
BQ Hephestos 2 3D printer.
## Support
This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any
issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail.

100
Marlin/src/config/examples/BQ/Hephestos_2/_Bootscreen.h
View file

@ -30,38 +30,39 @@
* http://marlinfw.org/tools/u8glib/converter.html * http://marlinfw.org/tools/u8glib/converter.html
*/ */
#define CUSTOM_BOOTSCREEN_BMPWIDTH 62 #define CUSTOM_BOOTSCREEN_BMPWIDTH 64
const unsigned char custom_start_bmp[] PROGMEM = { const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00001111,B11110000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000011,B11000000,B00001111,B11110000,B00000111,B10000000,B00000000,
B00000000,B00000111,B11100000,B00000111,B11100000,B00001111,B11000000,B00000000,
B00000000,B00001111,B11110000,B00000011,B11000000,B00011111,B11100000,B00000000,
B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000,
B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000,
B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000,
B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000,
B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000,
B00000000,B00001111,B11110000,B00000000,B00000000,B00011111,B11100000,B00000000,
B00000000,B00000111,B11100000,B00000000,B00000000,B00001111,B11000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B00000000,B00000111,B10000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000,
B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000,
B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000,
B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000,
B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
@ -69,32 +70,31 @@ const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000,
B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000,
B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000,
B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000,
B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000,
B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000,
B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000,
B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00011110,B00000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
B00111111,B00000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000,
B01111111,B10000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000,
B11111111,B11000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000,
B11111111,B11000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000,
B11111111,B11000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000,
B11111111,B11000000,B00000000,B00000000,B11110111,B11000000,B00011111,B10000000,
B11111111,B11000000,B00000000,B00000000,B11111111,B11110000,B01111111,B11000000,
B01111111,B10000000,B00000000,B00000000,B11111111,B11111000,B11111111,B11100000,
B00111111,B00000000,B00000000,B00000000,B11111100,B11111000,B11110000,B11111000,
B00011110,B00000000,B00000000,B00000000,B11111000,B01111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000,
B00000000,B00000000,B00000000,B00000000,B11111000,B01111001,B11110000,B11111000,
B00000000,B00000000,B00000000,B00000000,B11111111,B11111000,B11111111,B11111000,
B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B01111111,B11111000,
B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00111111,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000011,B10000000,B00001110,B01111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000
}; };

18
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
View file

@ -1173,17 +1173,6 @@
#endif #endif
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
// 3 arbitrary points to probe.
// A simple cross-product is used to estimate the plane of the bed.
//#define PROBE_PT_1_X 15
//#define PROBE_PT_1_Y 180
//#define PROBE_PT_2_X 15
//#define PROBE_PT_2_Y 20
//#define PROBE_PT_3_X 170
//#define PROBE_PT_3_Y 20
#elif ENABLED(AUTO_BED_LEVELING_UBL) #elif ENABLED(AUTO_BED_LEVELING_UBL)
//=========================================================================== //===========================================================================
@ -1196,13 +1185,6 @@
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
//#define PROBE_PT_1_X 15
//#define PROBE_PT_1_Y 180
//#define PROBE_PT_2_X 15
//#define PROBE_PT_2_Y 20
//#define PROBE_PT_3_X 170
//#define PROBE_PT_3_Y 20
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500

4
Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.cpp
View file

@ -68,6 +68,10 @@
#define CPU_ST7920_DELAY_1 DELAY_NS(0) #define CPU_ST7920_DELAY_1 DELAY_NS(0)
#define CPU_ST7920_DELAY_2 DELAY_NS(0) #define CPU_ST7920_DELAY_2 DELAY_NS(0)
#define CPU_ST7920_DELAY_3 DELAY_NS(0) #define CPU_ST7920_DELAY_3 DELAY_NS(0)
#elif MB(BQ_ZUM_MEGA_3D)
#define CPU_ST7920_DELAY_1 DELAY_NS(0)
#define CPU_ST7920_DELAY_2 DELAY_NS(0)
#define CPU_ST7920_DELAY_3 DELAY_NS(189)
#elif F_CPU == 16000000 #elif F_CPU == 16000000
#define CPU_ST7920_DELAY_1 DELAY_NS(0) #define CPU_ST7920_DELAY_1 DELAY_NS(0)
#define CPU_ST7920_DELAY_2 DELAY_NS(0) #define CPU_ST7920_DELAY_2 DELAY_NS(0)

71
Marlin/src/module/thermistor/thermistor_70.h
View file

@ -20,64 +20,23 @@
* *
*/ */
// Stock BQ Hephestos 2 100k thermistor.
// Created on 29/12/2017 with an ambient temperature of 20C.
// ANENG AN8009 DMM with a K-type probe used for measurements.
// R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, bqh2 stock thermistor // R25 = 100 kOhm, beta25 = 4100 K, 4.7 kOhm pull-up, bqh2 stock thermistor
const short temptable_70[][2] PROGMEM = { const short temptable_70[][2] PROGMEM = {
{ OV( 22), 300 }, { OV( 18), 270 },
{ OV( 24), 295 }, { OV( 27), 248 },
{ OV( 25), 290 }, { OV( 34), 234 },
{ OV( 27), 285 }, { OV( 45), 220 },
{ OV( 29), 280 }, { OV( 61), 205 },
{ OV( 32), 275 }, { OV( 86), 188 },
{ OV( 34), 270 }, { OV( 123), 172 },
{ OV( 37), 265 }, { OV( 420), 110 },
{ OV( 40), 260 }, { OV( 590), 90 },
{ OV( 43), 255 }, { OV( 845), 56 },
{ OV( 46), 250 }, { OV( 970), 25 },
{ OV( 50), 245 },
{ OV( 54), 240 },
{ OV( 59), 235 },
{ OV( 64), 230 },
{ OV( 70), 225 },
{ OV( 76), 220 },
{ OV( 83), 215 },
{ OV( 90), 210 },
{ OV( 99), 205 },
{ OV( 108), 200 },
{ OV( 118), 195 },
{ OV( 129), 190 },
{ OV( 141), 185 },
{ OV( 154), 180 },
{ OV( 169), 175 },
{ OV( 185), 170 },
{ OV( 203), 165 },
{ OV( 222), 160 },
{ OV( 243), 155 },
{ OV( 266), 150 },
{ OV( 290), 145 },
{ OV( 317), 140 },
{ OV( 346), 135 },
{ OV( 376), 130 },
{ OV( 408), 125 },
{ OV( 442), 120 },
{ OV( 477), 115 },
{ OV( 513), 110 },
{ OV( 551), 105 },
{ OV( 588), 100 },
{ OV( 626), 95 },
{ OV( 663), 90 },
{ OV( 699), 85 },
{ OV( 735), 80 },
{ OV( 768), 75 },
{ OV( 800), 70 },
{ OV( 829), 65 },
{ OV( 856), 60 },
{ OV( 881), 55 },
{ OV( 903), 50 },
{ OV( 922), 45 },
{ OV( 939), 40 },
{ OV( 954), 35 },
{ OV( 966), 30 },
{ OV( 977), 25 },
{ OV( 986), 20 }, { OV( 986), 20 },
{ OV( 994), 15 }, { OV( 994), 15 },
{ OV(1000), 10 }, { OV(1000), 10 },