diff --git a/Marlin/src/HAL/HAL_DUE/HAL_Due.h b/Marlin/src/HAL/HAL_DUE/HAL_Due.h
index 3ed093fe21..9519a2ba74 100644
--- a/Marlin/src/HAL/HAL_DUE/HAL_Due.h
+++ b/Marlin/src/HAL/HAL_DUE/HAL_Due.h
@@ -40,15 +40,13 @@
//
// Defines
//
-
-#if SERIAL_PORT == -1
- #define MYSERIAL SerialUSB
-#elif SERIAL_PORT >= 0 && SERIAL_PORT <= 4
+#if SERIAL_PORT >= -1 && SERIAL_PORT <= 4
#define MYSERIAL customizedSerial
#endif
// We need the previous define before the include, or compilation bombs...
#include "MarlinSerial_Due.h"
+#include "MarlinSerialUSB_Due.h"
#ifndef analogInputToDigitalPin
#define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
@@ -153,4 +151,16 @@ void HAL_enable_AdcFreerun(void);
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+// Enable hooks into idle and setup for USB stack
+#define HAL_IDLETASK 1
+#define HAL_INIT 1
+#ifdef __cplusplus
+extern "C" {
+#endif
+void HAL_idletask(void);
+void HAL_init(void);
+#ifdef __cplusplus
+}
+#endif
+
#endif // _HAL_DUE_H
diff --git a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.cpp b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.cpp
new file mode 100644
index 0000000000..c773877375
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.cpp
@@ -0,0 +1,254 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * MarlinSerial_Due.cpp - Hardware serial library for Arduino DUE
+ * Copyright (c) 2017 Eduardo José Tagle. All right reserved
+ * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti. All right reserved.
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if SERIAL_PORT == -1
+
+#include "MarlinSerialUSB_Due.h"
+
+// Imports from Atmel USB Stack/CDC implementation
+extern "C" {
+ bool usb_task_cdc_isenabled(void);
+ bool udi_cdc_is_rx_ready(void);
+ int udi_cdc_getc(void);
+ bool udi_cdc_is_tx_ready(void);
+ int udi_cdc_putc(int value);
+};
+
+// Pending character
+static int pending_char = -1;
+
+// Public Methods
+void MarlinSerialUSB::begin(const long baud_setting) {
+}
+
+void MarlinSerialUSB::end() {
+}
+
+int MarlinSerialUSB::peek(void) {
+ if (pending_char >= 0)
+ return pending_char;
+
+ if (!usb_task_cdc_isenabled())
+ return -1;
+
+ if (!udi_cdc_is_rx_ready())
+ return -1;
+
+ pending_char = udi_cdc_getc();
+ return pending_char;
+}
+
+int MarlinSerialUSB::read(void) {
+ if (pending_char >= 0) {
+ int ret = pending_char;
+ pending_char = -1;
+ return ret;
+ }
+
+ if (!usb_task_cdc_isenabled())
+ return -1;
+
+ if (!udi_cdc_is_rx_ready())
+ return -1;
+
+ return udi_cdc_getc();
+}
+
+bool MarlinSerialUSB::available(void) {
+ return pending_char >= 0 ||
+ (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
+}
+
+void MarlinSerialUSB::flush(void) {
+}
+
+void MarlinSerialUSB::write(const uint8_t c) {
+
+ while (usb_task_cdc_isenabled() &&
+ !udi_cdc_is_tx_ready()) {
+ };
+
+ if (!usb_task_cdc_isenabled())
+ return;
+
+ // Fifo full
+ // udi_cdc_signal_overrun();
+ udi_cdc_putc(c);
+}
+
+/**
+* Imports from print.h
+*/
+
+void MarlinSerialUSB::print(char c, int base) {
+ print((long)c, base);
+}
+
+void MarlinSerialUSB::print(unsigned char b, int base) {
+ print((unsigned long)b, base);
+}
+
+void MarlinSerialUSB::print(int n, int base) {
+ print((long)n, base);
+}
+
+void MarlinSerialUSB::print(unsigned int n, int base) {
+ print((unsigned long)n, base);
+}
+
+void MarlinSerialUSB::print(long n, int base) {
+ if (base == 0)
+ write(n);
+ else if (base == 10) {
+ if (n < 0) {
+ print('-');
+ n = -n;
+ }
+ printNumber(n, 10);
+ }
+ else
+ printNumber(n, base);
+}
+
+void MarlinSerialUSB::print(unsigned long n, int base) {
+ if (base == 0) write(n);
+ else printNumber(n, base);
+}
+
+void MarlinSerialUSB::print(double n, int digits) {
+ printFloat(n, digits);
+}
+
+void MarlinSerialUSB::println(void) {
+ print('\r');
+ print('\n');
+}
+
+void MarlinSerialUSB::println(const String& s) {
+ print(s);
+ println();
+}
+
+void MarlinSerialUSB::println(const char c[]) {
+ print(c);
+ println();
+}
+
+void MarlinSerialUSB::println(char c, int base) {
+ print(c, base);
+ println();
+}
+
+void MarlinSerialUSB::println(unsigned char b, int base) {
+ print(b, base);
+ println();
+}
+
+void MarlinSerialUSB::println(int n, int base) {
+ print(n, base);
+ println();
+}
+
+void MarlinSerialUSB::println(unsigned int n, int base) {
+ print(n, base);
+ println();
+}
+
+void MarlinSerialUSB::println(long n, int base) {
+ print(n, base);
+ println();
+}
+
+void MarlinSerialUSB::println(unsigned long n, int base) {
+ print(n, base);
+ println();
+}
+
+void MarlinSerialUSB::println(double n, int digits) {
+ print(n, digits);
+ println();
+}
+
+// Private Methods
+
+void MarlinSerialUSB::printNumber(unsigned long n, uint8_t base) {
+ if (n) {
+ unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+ int8_t i = 0;
+ while (n) {
+ buf[i++] = n % base;
+ n /= base;
+ }
+ while (i--)
+ print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+ }
+ else
+ print('0');
+}
+
+void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
+ // Handle negative numbers
+ if (number < 0.0) {
+ print('-');
+ number = -number;
+ }
+
+ // Round correctly so that print(1.999, 2) prints as "2.00"
+ double rounding = 0.5;
+ for (uint8_t i = 0; i < digits; ++i)
+ rounding *= 0.1;
+
+ number += rounding;
+
+ // Extract the integer part of the number and print it
+ unsigned long int_part = (unsigned long)number;
+ double remainder = number - (double)int_part;
+ print(int_part);
+
+ // Print the decimal point, but only if there are digits beyond
+ if (digits) {
+ print('.');
+ // Extract digits from the remainder one at a time
+ while (digits--) {
+ remainder *= 10.0;
+ int toPrint = int(remainder);
+ print(toPrint);
+ remainder -= toPrint;
+ }
+ }
+}
+
+// Preinstantiate
+MarlinSerialUSB customizedSerial;
+
+#endif // SERIAL_PORT == -1
+
+#endif // ARDUINO_ARCH_SAM
diff --git a/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h
new file mode 100644
index 0000000000..1a6c196d36
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h
@@ -0,0 +1,96 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * MarlinSerialUSB_Due.h - Hardware Serial over USB (CDC) library for Arduino DUE
+ * Copyright (c) 2017 Eduardo José Tagle. All right reserved
+ */
+
+#ifndef MARLINSERIALUSB_DUE_H
+#define MARLINSERIALUSB_DUE_H
+
+#include "../../inc/MarlinConfig.h"
+
+#if SERIAL_PORT == -1
+
+#include
+
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
+#define BYTE 0
+
+class MarlinSerialUSB {
+
+public:
+ MarlinSerialUSB() {};
+ static void begin(const long);
+ static void end();
+ static int peek(void);
+ static int read(void);
+ static void flush(void);
+ static bool available(void);
+ static void write(const uint8_t c);
+
+ #if ENABLED(SERIAL_STATS_DROPPED_RX)
+ FORCE_INLINE static uint32_t dropped() { return 0; }
+ #endif
+
+ #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+ FORCE_INLINE static int rxMaxEnqueued() { return 0; }
+ #endif
+
+ static FORCE_INLINE void write(const char* str) { while (*str) write(*str++); }
+ static FORCE_INLINE void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
+ static FORCE_INLINE void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
+ static FORCE_INLINE void print(const char* str) { write(str); }
+
+ static void print(char, int = BYTE);
+ static void print(unsigned char, int = BYTE);
+ static void print(int, int = DEC);
+ static void print(unsigned int, int = DEC);
+ static void print(long, int = DEC);
+ static void print(unsigned long, int = DEC);
+ static void print(double, int = 2);
+
+ static void println(const String& s);
+ static void println(const char[]);
+ static void println(char, int = BYTE);
+ static void println(unsigned char, int = BYTE);
+ static void println(int, int = DEC);
+ static void println(unsigned int, int = DEC);
+ static void println(long, int = DEC);
+ static void println(unsigned long, int = DEC);
+ static void println(double, int = 2);
+ static void println(void);
+ operator bool() { return true; }
+
+private:
+ static void printNumber(unsigned long, const uint8_t);
+ static void printFloat(double, uint8_t);
+};
+
+extern MarlinSerialUSB customizedSerial;
+
+#endif // SERIAL_PORT == -1
+#endif // MARLINSERIAL_DUE_H
diff --git a/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.h b/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.h
index a2284e3660..1330b89b8e 100644
--- a/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.h
+++ b/Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.h
@@ -31,11 +31,9 @@
#include "../../inc/MarlinConfig.h"
-#include
+#if SERIAL_PORT >= 0
-#ifndef SERIAL_PORT
- #define SERIAL_PORT 0
-#endif
+#include
#define DEC 10
#define HEX 16
@@ -135,4 +133,6 @@ private:
extern MarlinSerial customizedSerial;
+#endif // SERIAL_PORT >= 0
+
#endif // MARLINSERIAL_DUE_H
diff --git a/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h b/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h
new file mode 100644
index 0000000000..c1434228cd
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h
@@ -0,0 +1,103 @@
+/**
+ * \file
+ *
+ * \brief Arduino Due/X Board Definition.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef ARDUINO_DUE_X_H_INCLUDED
+#define ARDUINO_DUE_X_H_INCLUDED
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * \page arduino_due_x_opfreq "Arduino Due/X - Operating frequencies"
+ * This page lists several definition related to the board operating frequency
+ *
+ * \section Definitions
+ * - \ref BOARD_FREQ_*
+ * - \ref BOARD_MCK
+ */
+
+/*! Board oscillator settings */
+#define BOARD_FREQ_SLCK_XTAL (32768U)
+#define BOARD_FREQ_SLCK_BYPASS (32768U)
+#define BOARD_FREQ_MAINCK_XTAL (12000000U)
+#define BOARD_FREQ_MAINCK_BYPASS (12000000U)
+
+/*! Master clock frequency */
+#define BOARD_MCK CHIP_FREQ_CPU_MAX
+#define BOARD_NO_32K_XTAL
+
+/** board main clock xtal startup time */
+#define BOARD_OSC_STARTUP_US 15625
+
+/* ------------------------------------------------------------------------ */
+
+/**
+ * \page arduino_due_x_board_info "Arduino Due/X - Board informations"
+ * This page lists several definition related to the board description.
+ *
+ */
+
+/* ------------------------------------------------------------------------ */
+/* USB */
+/* ------------------------------------------------------------------------ */
+/*! USB OTG VBus On/Off: Bus Power Control Port. */
+#define PIN_UOTGHS_VBOF { PIO_PB10, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_PULLUP }
+/*! USB OTG Identification: Mini Connector Identification Port. */
+#define PIN_UOTGHS_ID { PIO_PB11, PIOB, ID_PIOB, PIO_PERIPH_A, PIO_PULLUP }
+
+/*! Multiplexed pin used for USB_ID: */
+#define USB_ID PIO_PB11_IDX
+#define USB_ID_GPIO (PIO_PB11_IDX)
+#define USB_ID_FLAGS (PIO_PERIPH_A | PIO_DEFAULT)
+/*! Multiplexed pin used for USB_VBOF: */
+#define USB_VBOF PIO_PB10_IDX
+#define USB_VBOF_GPIO (PIO_PB10_IDX)
+#define USB_VBOF_FLAGS (PIO_PERIPH_A | PIO_DEFAULT)
+/*! Active level of the USB_VBOF output pin. */
+#define USB_VBOF_ACTIVE_LEVEL LOW
+/* ------------------------------------------------------------------------ */
+
+
+#endif /* ARDUINO_DUE_X_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/compiler.h b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
new file mode 100644
index 0000000000..fed704aace
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/compiler.h
@@ -0,0 +1,1224 @@
+/**
+ * \file
+ *
+ * \brief Commonly used includes, types and macros.
+ *
+ * Copyright (c) 2010-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef UTILS_COMPILER_H
+#define UTILS_COMPILER_H
+
+#include
+#include
+#include "arduino_due_x.h"
+#include "conf_clock.h"
+#ifdef SAM3XA_SERIES
+#define SAM3XA 1
+#endif
+#define UDD_NO_SLEEP_MGR 1
+#define pmc_is_wakeup_clocks_restored() true
+
+#undef udd_get_endpoint_size_max
+#define UDD_USB_INT_FUN USBD_ISR
+
+/**
+ * \defgroup group_sam_utils Compiler abstraction layer and code utilities
+ *
+ * Compiler abstraction layer and code utilities for AT91SAM.
+ * This module provides various abstraction layers and utilities to make code compatible between different compilers.
+ *
+ * \{
+ */
+#include
+
+#if (defined __ICCARM__)
+# include
+#endif
+
+#include
+#include "preprocessor.h"
+
+//_____ D E C L A R A T I O N S ____________________________________________
+
+#ifndef __ASSEMBLY__ // Not defined for assembling.
+
+#include
+#include
+#include
+#include
+
+#ifdef __ICCARM__
+/*! \name Compiler Keywords
+ *
+ * Port of some keywords from GCC to IAR Embedded Workbench.
+ */
+//! @{
+#define __asm__ asm
+#define __inline__ inline
+#define __volatile__
+//! @}
+
+#endif
+
+#define FUNC_PTR void *
+/**
+ * \def UNUSED
+ * \brief Marking \a v as a unused parameter or value.
+ */
+#ifndef UNUSED
+#define UNUSED(v) (void)(v)
+#endif
+
+/**
+ * \def unused
+ * \brief Marking \a v as a unused parameter or value.
+ */
+#define unused(v) do { (void)(v); } while(0)
+
+/**
+ * \def barrier
+ * \brief Memory barrier
+ */
+#define barrier() __DMB()
+
+/**
+ * \brief Emit the compiler pragma \a arg.
+ *
+ * \param arg The pragma directive as it would appear after \e \#pragma
+ * (i.e. not stringified).
+ */
+#define COMPILER_PRAGMA(arg) _Pragma(#arg)
+
+/**
+ * \def COMPILER_PACK_SET(alignment)
+ * \brief Set maximum alignment for subsequent struct and union
+ * definitions to \a alignment.
+ */
+#define COMPILER_PACK_SET(alignment) COMPILER_PRAGMA(pack(alignment))
+
+/**
+ * \def COMPILER_PACK_RESET()
+ * \brief Set default alignment for subsequent struct and union
+ * definitions.
+ */
+#define COMPILER_PACK_RESET() COMPILER_PRAGMA(pack())
+
+
+/**
+ * \brief Set aligned boundary.
+ */
+#if (defined __GNUC__) || (defined __CC_ARM)
+# define COMPILER_ALIGNED(a) __attribute__((__aligned__(a)))
+#elif (defined __ICCARM__)
+# define COMPILER_ALIGNED(a) COMPILER_PRAGMA(data_alignment = a)
+#endif
+
+/**
+ * \brief Set word-aligned boundary.
+ */
+#if (defined __GNUC__) || defined(__CC_ARM)
+#define COMPILER_WORD_ALIGNED __attribute__((__aligned__(4)))
+#elif (defined __ICCARM__)
+#define COMPILER_WORD_ALIGNED COMPILER_PRAGMA(data_alignment = 4)
+#endif
+
+/**
+ * \def __always_inline
+ * \brief The function should always be inlined.
+ *
+ * This annotation instructs the compiler to ignore its inlining
+ * heuristics and inline the function no matter how big it thinks it
+ * becomes.
+ */
+#if defined(__CC_ARM)
+# define __always_inline __forceinline
+#elif (defined __GNUC__)
+#ifdef __always_inline
+# undef __always_inline
+#endif
+# define __always_inline inline __attribute__((__always_inline__))
+#elif (defined __ICCARM__)
+# define __always_inline _Pragma("inline=forced")
+#endif
+
+/**
+ * \def __no_inline
+ * \brief The function should not be inlined.
+ *
+ * This annotation instructs the compiler to ignore its inlining
+ * heuristics and not inline the function.
+ */
+#if defined(__CC_ARM)
+# define __no_inline __attribute__((noinline))
+#elif (defined __GNUC__)
+# define __no_inline __attribute__((__noinline__))
+#elif (defined __ICCARM__)
+# define __no_inline _Pragma("inline=never")
+#endif
+
+/*! \brief This macro is used to test fatal errors.
+ *
+ * The macro tests if the expression is false. If it is, a fatal error is
+ * detected and the application hangs up. If TEST_SUITE_DEFINE_ASSERT_MACRO
+ * is defined, a unit test version of the macro is used, to allow execution
+ * of further tests after a false expression.
+ *
+ * \param expr Expression to evaluate and supposed to be nonzero.
+ */
+#if defined(_ASSERT_ENABLE_)
+# if defined(TEST_SUITE_DEFINE_ASSERT_MACRO)
+ // Assert() is defined in unit_test/suite.h
+# include "unit_test/suite.h"
+# else
+#undef TEST_SUITE_DEFINE_ASSERT_MACRO
+# define Assert(expr) \
+ {\
+ if (!(expr)) while (true);\
+ }
+# endif
+#else
+# define Assert(expr) ((void) 0)
+#endif
+
+/* Define WEAK attribute */
+#if defined ( __CC_ARM ) /* Keil µVision 4 */
+# define WEAK __attribute__ ((weak))
+#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
+# define WEAK __weak
+#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */
+# define WEAK __attribute__ ((weak))
+#endif
+
+/* Define NO_INIT attribute */
+#if 0 //ndef NO_INIT
+#if defined ( __CC_ARM )
+# define NO_INIT __attribute__((zero_init))
+#elif defined ( __ICCARM__ )
+# define NO_INIT __no_init
+#elif defined ( __GNUC__ )
+# define NO_INIT __attribute__((section(".no_init")))
+#endif
+#endif
+
+/* Define RAMFUNC attribute */
+#if defined ( __CC_ARM ) /* Keil µVision 4 */
+# define RAMFUNC __attribute__ ((section(".ramfunc")))
+#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
+# define RAMFUNC __ramfunc
+#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */
+# define RAMFUNC __attribute__ ((section(".ramfunc")))
+#endif
+
+/* Define OPTIMIZE_HIGH attribute */
+#if defined ( __CC_ARM ) /* Keil µVision 4 */
+# define OPTIMIZE_HIGH _Pragma("O3")
+#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */
+# define OPTIMIZE_HIGH _Pragma("optimize=high")
+#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */
+# define OPTIMIZE_HIGH __attribute__((optimize("s")))
+#endif
+
+/*! \name Usual Types
+ */
+//! @{
+typedef unsigned char Bool; //!< Boolean.
+#ifndef __cplusplus
+#if !defined(__bool_true_false_are_defined)
+typedef unsigned char bool; //!< Boolean.
+#endif
+#endif
+typedef int8_t S8 ; //!< 8-bit signed integer.
+typedef uint8_t U8 ; //!< 8-bit unsigned integer.
+typedef int16_t S16; //!< 16-bit signed integer.
+typedef uint16_t U16; //!< 16-bit unsigned integer.
+typedef uint16_t le16_t;
+typedef uint16_t be16_t;
+typedef int32_t S32; //!< 32-bit signed integer.
+typedef uint32_t U32; //!< 32-bit unsigned integer.
+typedef uint32_t le32_t;
+typedef uint32_t be32_t;
+typedef int64_t S64; //!< 64-bit signed integer.
+typedef uint64_t U64; //!< 64-bit unsigned integer.
+typedef float F32; //!< 32-bit floating-point number.
+typedef double F64; //!< 64-bit floating-point number.
+typedef uint32_t iram_size_t;
+//! @}
+
+
+/*! \name Status Types
+ */
+//! @{
+typedef bool Status_bool_t; //!< Boolean status.
+typedef U8 Status_t; //!< 8-bit-coded status.
+//! @}
+
+
+/*! \name Aliasing Aggregate Types
+ */
+//! @{
+
+//! 16-bit union.
+typedef union
+{
+ S16 s16 ;
+ U16 u16 ;
+ S8 s8 [2];
+ U8 u8 [2];
+} Union16;
+
+//! 32-bit union.
+typedef union
+{
+ S32 s32 ;
+ U32 u32 ;
+ S16 s16[2];
+ U16 u16[2];
+ S8 s8 [4];
+ U8 u8 [4];
+} Union32;
+
+//! 64-bit union.
+typedef union
+{
+ S64 s64 ;
+ U64 u64 ;
+ S32 s32[2];
+ U32 u32[2];
+ S16 s16[4];
+ U16 u16[4];
+ S8 s8 [8];
+ U8 u8 [8];
+} Union64;
+
+//! Union of pointers to 64-, 32-, 16- and 8-bit unsigned integers.
+typedef union
+{
+ S64 *s64ptr;
+ U64 *u64ptr;
+ S32 *s32ptr;
+ U32 *u32ptr;
+ S16 *s16ptr;
+ U16 *u16ptr;
+ S8 *s8ptr ;
+ U8 *u8ptr ;
+} UnionPtr;
+
+//! Union of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers.
+typedef union
+{
+ volatile S64 *s64ptr;
+ volatile U64 *u64ptr;
+ volatile S32 *s32ptr;
+ volatile U32 *u32ptr;
+ volatile S16 *s16ptr;
+ volatile U16 *u16ptr;
+ volatile S8 *s8ptr ;
+ volatile U8 *u8ptr ;
+} UnionVPtr;
+
+//! Union of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers.
+typedef union
+{
+ const S64 *s64ptr;
+ const U64 *u64ptr;
+ const S32 *s32ptr;
+ const U32 *u32ptr;
+ const S16 *s16ptr;
+ const U16 *u16ptr;
+ const S8 *s8ptr ;
+ const U8 *u8ptr ;
+} UnionCPtr;
+
+//! Union of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers.
+typedef union
+{
+ const volatile S64 *s64ptr;
+ const volatile U64 *u64ptr;
+ const volatile S32 *s32ptr;
+ const volatile U32 *u32ptr;
+ const volatile S16 *s16ptr;
+ const volatile U16 *u16ptr;
+ const volatile S8 *s8ptr ;
+ const volatile U8 *u8ptr ;
+} UnionCVPtr;
+
+//! Structure of pointers to 64-, 32-, 16- and 8-bit unsigned integers.
+typedef struct
+{
+ S64 *s64ptr;
+ U64 *u64ptr;
+ S32 *s32ptr;
+ U32 *u32ptr;
+ S16 *s16ptr;
+ U16 *u16ptr;
+ S8 *s8ptr ;
+ U8 *u8ptr ;
+} StructPtr;
+
+//! Structure of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers.
+typedef struct
+{
+ volatile S64 *s64ptr;
+ volatile U64 *u64ptr;
+ volatile S32 *s32ptr;
+ volatile U32 *u32ptr;
+ volatile S16 *s16ptr;
+ volatile U16 *u16ptr;
+ volatile S8 *s8ptr ;
+ volatile U8 *u8ptr ;
+} StructVPtr;
+
+//! Structure of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers.
+typedef struct
+{
+ const S64 *s64ptr;
+ const U64 *u64ptr;
+ const S32 *s32ptr;
+ const U32 *u32ptr;
+ const S16 *s16ptr;
+ const U16 *u16ptr;
+ const S8 *s8ptr ;
+ const U8 *u8ptr ;
+} StructCPtr;
+
+//! Structure of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers.
+typedef struct
+{
+ const volatile S64 *s64ptr;
+ const volatile U64 *u64ptr;
+ const volatile S32 *s32ptr;
+ const volatile U32 *u32ptr;
+ const volatile S16 *s16ptr;
+ const volatile U16 *u16ptr;
+ const volatile S8 *s8ptr ;
+ const volatile U8 *u8ptr ;
+} StructCVPtr;
+
+//! @}
+
+#endif // #ifndef __ASSEMBLY__
+
+/*! \name Usual Constants
+ */
+//! @{
+#define DISABLE 0
+#define ENABLE 1
+#ifndef __cplusplus
+#if !defined(__bool_true_false_are_defined)
+#define false 0
+#define true 1
+#endif
+#endif
+#ifndef PASS
+#define PASS 0
+#endif
+#ifndef FAIL
+#define FAIL 1
+#endif
+#ifndef LOW
+#define LOW 0
+#endif
+#ifndef HIGH
+#define HIGH 1
+#endif
+//! @}
+
+
+#ifndef __ASSEMBLY__ // not for assembling.
+
+//! \name Optimization Control
+//@{
+
+/**
+ * \def likely(exp)
+ * \brief The expression \a exp is likely to be true
+ */
+#ifndef likely
+# define likely(exp) (exp)
+#endif
+
+/**
+ * \def unlikely(exp)
+ * \brief The expression \a exp is unlikely to be true
+ */
+#ifndef unlikely
+# define unlikely(exp) (exp)
+#endif
+
+/**
+ * \def is_constant(exp)
+ * \brief Determine if an expression evaluates to a constant value.
+ *
+ * \param exp Any expression
+ *
+ * \return true if \a exp is constant, false otherwise.
+ */
+#if (defined __GNUC__) || (defined __CC_ARM)
+# define is_constant(exp) __builtin_constant_p(exp)
+#else
+# define is_constant(exp) (0)
+#endif
+
+//! @}
+
+/*! \name Bit-Field Handling
+ */
+//! @{
+
+/*! \brief Reads the bits of a value specified by a given bit-mask.
+ *
+ * \param value Value to read bits from.
+ * \param mask Bit-mask indicating bits to read.
+ *
+ * \return Read bits.
+ */
+#define Rd_bits( value, mask) ((value) & (mask))
+
+/*! \brief Writes the bits of a C lvalue specified by a given bit-mask.
+ *
+ * \param lvalue C lvalue to write bits to.
+ * \param mask Bit-mask indicating bits to write.
+ * \param bits Bits to write.
+ *
+ * \return Resulting value with written bits.
+ */
+#define Wr_bits(lvalue, mask, bits) ((lvalue) = ((lvalue) & ~(mask)) |\
+ ((bits ) & (mask)))
+
+/*! \brief Tests the bits of a value specified by a given bit-mask.
+ *
+ * \param value Value of which to test bits.
+ * \param mask Bit-mask indicating bits to test.
+ *
+ * \return \c 1 if at least one of the tested bits is set, else \c 0.
+ */
+#define Tst_bits( value, mask) (Rd_bits(value, mask) != 0)
+
+/*! \brief Clears the bits of a C lvalue specified by a given bit-mask.
+ *
+ * \param lvalue C lvalue of which to clear bits.
+ * \param mask Bit-mask indicating bits to clear.
+ *
+ * \return Resulting value with cleared bits.
+ */
+#define Clr_bits(lvalue, mask) ((lvalue) &= ~(mask))
+
+/*! \brief Sets the bits of a C lvalue specified by a given bit-mask.
+ *
+ * \param lvalue C lvalue of which to set bits.
+ * \param mask Bit-mask indicating bits to set.
+ *
+ * \return Resulting value with set bits.
+ */
+#define Set_bits(lvalue, mask) ((lvalue) |= (mask))
+
+/*! \brief Toggles the bits of a C lvalue specified by a given bit-mask.
+ *
+ * \param lvalue C lvalue of which to toggle bits.
+ * \param mask Bit-mask indicating bits to toggle.
+ *
+ * \return Resulting value with toggled bits.
+ */
+#define Tgl_bits(lvalue, mask) ((lvalue) ^= (mask))
+
+/*! \brief Reads the bit-field of a value specified by a given bit-mask.
+ *
+ * \param value Value to read a bit-field from.
+ * \param mask Bit-mask indicating the bit-field to read.
+ *
+ * \return Read bit-field.
+ */
+#define Rd_bitfield( value, mask) (Rd_bits( value, mask) >> ctz(mask))
+
+/*! \brief Writes the bit-field of a C lvalue specified by a given bit-mask.
+ *
+ * \param lvalue C lvalue to write a bit-field to.
+ * \param mask Bit-mask indicating the bit-field to write.
+ * \param bitfield Bit-field to write.
+ *
+ * \return Resulting value with written bit-field.
+ */
+#define Wr_bitfield(lvalue, mask, bitfield) (Wr_bits(lvalue, mask, (U32)(bitfield) << ctz(mask)))
+
+//! @}
+
+
+/*! \name Zero-Bit Counting
+ *
+ * Under GCC, __builtin_clz and __builtin_ctz behave like macros when
+ * applied to constant expressions (values known at compile time), so they are
+ * more optimized than the use of the corresponding assembly instructions and
+ * they can be used as constant expressions e.g. to initialize objects having
+ * static storage duration, and like the corresponding assembly instructions
+ * when applied to non-constant expressions (values unknown at compile time), so
+ * they are more optimized than an assembly periphrasis. Hence, clz and ctz
+ * ensure a possible and optimized behavior for both constant and non-constant
+ * expressions.
+ */
+//! @{
+
+/*! \brief Counts the leading zero bits of the given value considered as a 32-bit integer.
+ *
+ * \param u Value of which to count the leading zero bits.
+ *
+ * \return The count of leading zero bits in \a u.
+ */
+#ifndef clz
+#if (defined __GNUC__) || (defined __CC_ARM)
+# define clz(u) ((u) ? __builtin_clz(u) : 32)
+#elif (defined __ICCARM__)
+# define clz(u) ((u) ? __CLZ(u) : 32)
+#else
+# define clz(u) (((u) == 0) ? 32 : \
+ ((u) & (1ul << 31)) ? 0 : \
+ ((u) & (1ul << 30)) ? 1 : \
+ ((u) & (1ul << 29)) ? 2 : \
+ ((u) & (1ul << 28)) ? 3 : \
+ ((u) & (1ul << 27)) ? 4 : \
+ ((u) & (1ul << 26)) ? 5 : \
+ ((u) & (1ul << 25)) ? 6 : \
+ ((u) & (1ul << 24)) ? 7 : \
+ ((u) & (1ul << 23)) ? 8 : \
+ ((u) & (1ul << 22)) ? 9 : \
+ ((u) & (1ul << 21)) ? 10 : \
+ ((u) & (1ul << 20)) ? 11 : \
+ ((u) & (1ul << 19)) ? 12 : \
+ ((u) & (1ul << 18)) ? 13 : \
+ ((u) & (1ul << 17)) ? 14 : \
+ ((u) & (1ul << 16)) ? 15 : \
+ ((u) & (1ul << 15)) ? 16 : \
+ ((u) & (1ul << 14)) ? 17 : \
+ ((u) & (1ul << 13)) ? 18 : \
+ ((u) & (1ul << 12)) ? 19 : \
+ ((u) & (1ul << 11)) ? 20 : \
+ ((u) & (1ul << 10)) ? 21 : \
+ ((u) & (1ul << 9)) ? 22 : \
+ ((u) & (1ul << 8)) ? 23 : \
+ ((u) & (1ul << 7)) ? 24 : \
+ ((u) & (1ul << 6)) ? 25 : \
+ ((u) & (1ul << 5)) ? 26 : \
+ ((u) & (1ul << 4)) ? 27 : \
+ ((u) & (1ul << 3)) ? 28 : \
+ ((u) & (1ul << 2)) ? 29 : \
+ ((u) & (1ul << 1)) ? 30 : \
+ 31)
+#endif
+#endif
+
+/*! \brief Counts the trailing zero bits of the given value considered as a 32-bit integer.
+ *
+ * \param u Value of which to count the trailing zero bits.
+ *
+ * \return The count of trailing zero bits in \a u.
+ */
+#ifndef ctz
+#if (defined __GNUC__) || (defined __CC_ARM)
+# define ctz(u) ((u) ? __builtin_ctz(u) : 32)
+#else
+# define ctz(u) ((u) & (1ul << 0) ? 0 : \
+ (u) & (1ul << 1) ? 1 : \
+ (u) & (1ul << 2) ? 2 : \
+ (u) & (1ul << 3) ? 3 : \
+ (u) & (1ul << 4) ? 4 : \
+ (u) & (1ul << 5) ? 5 : \
+ (u) & (1ul << 6) ? 6 : \
+ (u) & (1ul << 7) ? 7 : \
+ (u) & (1ul << 8) ? 8 : \
+ (u) & (1ul << 9) ? 9 : \
+ (u) & (1ul << 10) ? 10 : \
+ (u) & (1ul << 11) ? 11 : \
+ (u) & (1ul << 12) ? 12 : \
+ (u) & (1ul << 13) ? 13 : \
+ (u) & (1ul << 14) ? 14 : \
+ (u) & (1ul << 15) ? 15 : \
+ (u) & (1ul << 16) ? 16 : \
+ (u) & (1ul << 17) ? 17 : \
+ (u) & (1ul << 18) ? 18 : \
+ (u) & (1ul << 19) ? 19 : \
+ (u) & (1ul << 20) ? 20 : \
+ (u) & (1ul << 21) ? 21 : \
+ (u) & (1ul << 22) ? 22 : \
+ (u) & (1ul << 23) ? 23 : \
+ (u) & (1ul << 24) ? 24 : \
+ (u) & (1ul << 25) ? 25 : \
+ (u) & (1ul << 26) ? 26 : \
+ (u) & (1ul << 27) ? 27 : \
+ (u) & (1ul << 28) ? 28 : \
+ (u) & (1ul << 29) ? 29 : \
+ (u) & (1ul << 30) ? 30 : \
+ (u) & (1ul << 31) ? 31 : \
+ 32)
+#endif
+#endif
+
+//! @}
+
+
+/*! \name Bit Reversing
+ */
+//! @{
+
+/*! \brief Reverses the bits of \a u8.
+ *
+ * \param u8 U8 of which to reverse the bits.
+ *
+ * \return Value resulting from \a u8 with reversed bits.
+ */
+#define bit_reverse8(u8) ((U8)(bit_reverse32((U8)(u8)) >> 24))
+
+/*! \brief Reverses the bits of \a u16.
+ *
+ * \param u16 U16 of which to reverse the bits.
+ *
+ * \return Value resulting from \a u16 with reversed bits.
+ */
+#define bit_reverse16(u16) ((U16)(bit_reverse32((U16)(u16)) >> 16))
+
+/*! \brief Reverses the bits of \a u32.
+ *
+ * \param u32 U32 of which to reverse the bits.
+ *
+ * \return Value resulting from \a u32 with reversed bits.
+ */
+#define bit_reverse32(u32) __RBIT(u32)
+
+/*! \brief Reverses the bits of \a u64.
+ *
+ * \param u64 U64 of which to reverse the bits.
+ *
+ * \return Value resulting from \a u64 with reversed bits.
+ */
+#define bit_reverse64(u64) ((U64)(((U64)bit_reverse32((U64)(u64) >> 32)) |\
+ ((U64)bit_reverse32((U64)(u64)) << 32)))
+
+//! @}
+
+
+/*! \name Alignment
+ */
+//! @{
+
+/*! \brief Tests alignment of the number \a val with the \a n boundary.
+ *
+ * \param val Input value.
+ * \param n Boundary.
+ *
+ * \return \c 1 if the number \a val is aligned with the \a n boundary, else \c 0.
+ */
+#define Test_align(val, n ) (!Tst_bits( val, (n) - 1 ) )
+
+/*! \brief Gets alignment of the number \a val with respect to the \a n boundary.
+ *
+ * \param val Input value.
+ * \param n Boundary.
+ *
+ * \return Alignment of the number \a val with respect to the \a n boundary.
+ */
+#define Get_align( val, n ) ( Rd_bits( val, (n) - 1 ) )
+
+/*! \brief Sets alignment of the lvalue number \a lval to \a alg with respect to the \a n boundary.
+ *
+ * \param lval Input/output lvalue.
+ * \param n Boundary.
+ * \param alg Alignment.
+ *
+ * \return New value of \a lval resulting from its alignment set to \a alg with respect to the \a n boundary.
+ */
+#define Set_align(lval, n, alg) ( Wr_bits(lval, (n) - 1, alg) )
+
+/*! \brief Aligns the number \a val with the upper \a n boundary.
+ *
+ * \param val Input value.
+ * \param n Boundary.
+ *
+ * \return Value resulting from the number \a val aligned with the upper \a n boundary.
+ */
+#define Align_up( val, n ) (((val) + ((n) - 1)) & ~((n) - 1))
+
+/*! \brief Aligns the number \a val with the lower \a n boundary.
+ *
+ * \param val Input value.
+ * \param n Boundary.
+ *
+ * \return Value resulting from the number \a val aligned with the lower \a n boundary.
+ */
+#define Align_down(val, n ) ( (val) & ~((n) - 1))
+
+//! @}
+
+
+/*! \name Mathematics
+ *
+ * The same considerations as for clz and ctz apply here but GCC does not
+ * provide built-in functions to access the assembly instructions abs, min and
+ * max and it does not produce them by itself in most cases, so two sets of
+ * macros are defined here:
+ * - Abs, Min and Max to apply to constant expressions (values known at
+ * compile time);
+ * - abs, min and max to apply to non-constant expressions (values unknown at
+ * compile time), abs is found in stdlib.h.
+ */
+//! @{
+
+/*! \brief Takes the absolute value of \a a.
+ *
+ * \param a Input value.
+ *
+ * \return Absolute value of \a a.
+ *
+ * \note More optimized if only used with values known at compile time.
+ */
+#define Abs(a) (((a) < 0 ) ? -(a) : (a))
+
+/*! \brief Takes the minimal value of \a a and \a b.
+ *
+ * \param a Input value.
+ * \param b Input value.
+ *
+ * \return Minimal value of \a a and \a b.
+ *
+ * \note More optimized if only used with values known at compile time.
+ */
+#define Min(a, b) (((a) < (b)) ? (a) : (b))
+
+/*! \brief Takes the maximal value of \a a and \a b.
+ *
+ * \param a Input value.
+ * \param b Input value.
+ *
+ * \return Maximal value of \a a and \a b.
+ *
+ * \note More optimized if only used with values known at compile time.
+ */
+#define Max(a, b) (((a) > (b)) ? (a) : (b))
+
+// abs() is already defined by stdlib.h
+
+/*! \brief Takes the minimal value of \a a and \a b.
+ *
+ * \param a Input value.
+ * \param b Input value.
+ *
+ * \return Minimal value of \a a and \a b.
+ *
+ * \note More optimized if only used with values unknown at compile time.
+ */
+#define min(a, b) Min(a, b)
+
+/*! \brief Takes the maximal value of \a a and \a b.
+ *
+ * \param a Input value.
+ * \param b Input value.
+ *
+ * \return Maximal value of \a a and \a b.
+ *
+ * \note More optimized if only used with values unknown at compile time.
+ */
+#define max(a, b) Max(a, b)
+
+//! @}
+
+
+/*! \brief Calls the routine at address \a addr.
+ *
+ * It generates a long call opcode.
+ *
+ * For example, `Long_call(0x80000000)' generates a software reset on a UC3 if
+ * it is invoked from the CPU supervisor mode.
+ *
+ * \param addr Address of the routine to call.
+ *
+ * \note It may be used as a long jump opcode in some special cases.
+ */
+#define Long_call(addr) ((*(void (*)(void))(addr))())
+
+
+/*! \name MCU Endianism Handling
+ * ARM is MCU little endianism.
+ */
+//! @{
+#define MSB(u16) (((U8 *)&(u16))[1]) //!< Most significant byte of \a u16.
+#define LSB(u16) (((U8 *)&(u16))[0]) //!< Least significant byte of \a u16.
+
+#define MSH(u32) (((U16 *)&(u32))[1]) //!< Most significant half-word of \a u32.
+#define LSH(u32) (((U16 *)&(u32))[0]) //!< Least significant half-word of \a u32.
+#define MSB0W(u32) (((U8 *)&(u32))[3]) //!< Most significant byte of 1st rank of \a u32.
+#define MSB1W(u32) (((U8 *)&(u32))[2]) //!< Most significant byte of 2nd rank of \a u32.
+#define MSB2W(u32) (((U8 *)&(u32))[1]) //!< Most significant byte of 3rd rank of \a u32.
+#define MSB3W(u32) (((U8 *)&(u32))[0]) //!< Most significant byte of 4th rank of \a u32.
+#define LSB3W(u32) MSB0W(u32) //!< Least significant byte of 4th rank of \a u32.
+#define LSB2W(u32) MSB1W(u32) //!< Least significant byte of 3rd rank of \a u32.
+#define LSB1W(u32) MSB2W(u32) //!< Least significant byte of 2nd rank of \a u32.
+#define LSB0W(u32) MSB3W(u32) //!< Least significant byte of 1st rank of \a u32.
+
+#define MSW(u64) (((U32 *)&(u64))[1]) //!< Most significant word of \a u64.
+#define LSW(u64) (((U32 *)&(u64))[0]) //!< Least significant word of \a u64.
+#define MSH0(u64) (((U16 *)&(u64))[3]) //!< Most significant half-word of 1st rank of \a u64.
+#define MSH1(u64) (((U16 *)&(u64))[2]) //!< Most significant half-word of 2nd rank of \a u64.
+#define MSH2(u64) (((U16 *)&(u64))[1]) //!< Most significant half-word of 3rd rank of \a u64.
+#define MSH3(u64) (((U16 *)&(u64))[0]) //!< Most significant half-word of 4th rank of \a u64.
+#define LSH3(u64) MSH0(u64) //!< Least significant half-word of 4th rank of \a u64.
+#define LSH2(u64) MSH1(u64) //!< Least significant half-word of 3rd rank of \a u64.
+#define LSH1(u64) MSH2(u64) //!< Least significant half-word of 2nd rank of \a u64.
+#define LSH0(u64) MSH3(u64) //!< Least significant half-word of 1st rank of \a u64.
+#define MSB0D(u64) (((U8 *)&(u64))[7]) //!< Most significant byte of 1st rank of \a u64.
+#define MSB1D(u64) (((U8 *)&(u64))[6]) //!< Most significant byte of 2nd rank of \a u64.
+#define MSB2D(u64) (((U8 *)&(u64))[5]) //!< Most significant byte of 3rd rank of \a u64.
+#define MSB3D(u64) (((U8 *)&(u64))[4]) //!< Most significant byte of 4th rank of \a u64.
+#define MSB4D(u64) (((U8 *)&(u64))[3]) //!< Most significant byte of 5th rank of \a u64.
+#define MSB5D(u64) (((U8 *)&(u64))[2]) //!< Most significant byte of 6th rank of \a u64.
+#define MSB6D(u64) (((U8 *)&(u64))[1]) //!< Most significant byte of 7th rank of \a u64.
+#define MSB7D(u64) (((U8 *)&(u64))[0]) //!< Most significant byte of 8th rank of \a u64.
+#define LSB7D(u64) MSB0D(u64) //!< Least significant byte of 8th rank of \a u64.
+#define LSB6D(u64) MSB1D(u64) //!< Least significant byte of 7th rank of \a u64.
+#define LSB5D(u64) MSB2D(u64) //!< Least significant byte of 6th rank of \a u64.
+#define LSB4D(u64) MSB3D(u64) //!< Least significant byte of 5th rank of \a u64.
+#define LSB3D(u64) MSB4D(u64) //!< Least significant byte of 4th rank of \a u64.
+#define LSB2D(u64) MSB5D(u64) //!< Least significant byte of 3rd rank of \a u64.
+#define LSB1D(u64) MSB6D(u64) //!< Least significant byte of 2nd rank of \a u64.
+#define LSB0D(u64) MSB7D(u64) //!< Least significant byte of 1st rank of \a u64.
+
+#define BE16(x) swap16(x)
+#define LE16(x) (x)
+
+#define le16_to_cpu(x) (x)
+#define cpu_to_le16(x) (x)
+#define LE16_TO_CPU(x) (x)
+#define CPU_TO_LE16(x) (x)
+
+#define be16_to_cpu(x) swap16(x)
+#define cpu_to_be16(x) swap16(x)
+#define BE16_TO_CPU(x) swap16(x)
+#define CPU_TO_BE16(x) swap16(x)
+
+#define le32_to_cpu(x) (x)
+#define cpu_to_le32(x) (x)
+#define LE32_TO_CPU(x) (x)
+#define CPU_TO_LE32(x) (x)
+
+#define be32_to_cpu(x) swap32(x)
+#define cpu_to_be32(x) swap32(x)
+#define BE32_TO_CPU(x) swap32(x)
+#define CPU_TO_BE32(x) swap32(x)
+//! @}
+
+
+/*! \name Endianism Conversion
+ *
+ * The same considerations as for clz and ctz apply here but GCC's
+ * __builtin_bswap_32 and __builtin_bswap_64 do not behave like macros when
+ * applied to constant expressions, so two sets of macros are defined here:
+ * - Swap16, Swap32 and Swap64 to apply to constant expressions (values known
+ * at compile time);
+ * - swap16, swap32 and swap64 to apply to non-constant expressions (values
+ * unknown at compile time).
+ */
+//! @{
+
+/*! \brief Toggles the endianism of \a u16 (by swapping its bytes).
+ *
+ * \param u16 U16 of which to toggle the endianism.
+ *
+ * \return Value resulting from \a u16 with toggled endianism.
+ *
+ * \note More optimized if only used with values known at compile time.
+ */
+#define Swap16(u16) ((U16)(((U16)(u16) >> 8) |\
+ ((U16)(u16) << 8)))
+
+/*! \brief Toggles the endianism of \a u32 (by swapping its bytes).
+ *
+ * \param u32 U32 of which to toggle the endianism.
+ *
+ * \return Value resulting from \a u32 with toggled endianism.
+ *
+ * \note More optimized if only used with values known at compile time.
+ */
+#define Swap32(u32) ((U32)(((U32)Swap16((U32)(u32) >> 16)) |\
+ ((U32)Swap16((U32)(u32)) << 16)))
+
+/*! \brief Toggles the endianism of \a u64 (by swapping its bytes).
+ *
+ * \param u64 U64 of which to toggle the endianism.
+ *
+ * \return Value resulting from \a u64 with toggled endianism.
+ *
+ * \note More optimized if only used with values known at compile time.
+ */
+#define Swap64(u64) ((U64)(((U64)Swap32((U64)(u64) >> 32)) |\
+ ((U64)Swap32((U64)(u64)) << 32)))
+
+/*! \brief Toggles the endianism of \a u16 (by swapping its bytes).
+ *
+ * \param u16 U16 of which to toggle the endianism.
+ *
+ * \return Value resulting from \a u16 with toggled endianism.
+ *
+ * \note More optimized if only used with values unknown at compile time.
+ */
+#define swap16(u16) Swap16(u16)
+
+/*! \brief Toggles the endianism of \a u32 (by swapping its bytes).
+ *
+ * \param u32 U32 of which to toggle the endianism.
+ *
+ * \return Value resulting from \a u32 with toggled endianism.
+ *
+ * \note More optimized if only used with values unknown at compile time.
+ */
+#if (defined __GNUC__)
+# define swap32(u32) ((U32)__builtin_bswap32((U32)(u32)))
+#else
+# define swap32(u32) Swap32(u32)
+#endif
+
+/*! \brief Toggles the endianism of \a u64 (by swapping its bytes).
+ *
+ * \param u64 U64 of which to toggle the endianism.
+ *
+ * \return Value resulting from \a u64 with toggled endianism.
+ *
+ * \note More optimized if only used with values unknown at compile time.
+ */
+#if (defined __GNUC__)
+# define swap64(u64) ((U64)__builtin_bswap64((U64)(u64)))
+#else
+# define swap64(u64) ((U64)(((U64)swap32((U64)(u64) >> 32)) |\
+ ((U64)swap32((U64)(u64)) << 32)))
+#endif
+
+//! @}
+
+
+/*! \name Target Abstraction
+ */
+//! @{
+
+#define _GLOBEXT_ extern //!< extern storage-class specifier.
+#define _CONST_TYPE_ const //!< const type qualifier.
+#define _MEM_TYPE_SLOW_ //!< Slow memory type.
+#define _MEM_TYPE_MEDFAST_ //!< Fairly fast memory type.
+#define _MEM_TYPE_FAST_ //!< Fast memory type.
+
+typedef U8 Byte; //!< 8-bit unsigned integer.
+
+#define memcmp_ram2ram memcmp //!< Target-specific memcmp of RAM to RAM.
+#define memcmp_code2ram memcmp //!< Target-specific memcmp of RAM to NVRAM.
+#define memcpy_ram2ram memcpy //!< Target-specific memcpy from RAM to RAM.
+#define memcpy_code2ram memcpy //!< Target-specific memcpy from NVRAM to RAM.
+
+#define LSB0(u32) LSB0W(u32) //!< Least significant byte of 1st rank of \a u32.
+#define LSB1(u32) LSB1W(u32) //!< Least significant byte of 2nd rank of \a u32.
+#define LSB2(u32) LSB2W(u32) //!< Least significant byte of 3rd rank of \a u32.
+#define LSB3(u32) LSB3W(u32) //!< Least significant byte of 4th rank of \a u32.
+#define MSB3(u32) MSB3W(u32) //!< Most significant byte of 4th rank of \a u32.
+#define MSB2(u32) MSB2W(u32) //!< Most significant byte of 3rd rank of \a u32.
+#define MSB1(u32) MSB1W(u32) //!< Most significant byte of 2nd rank of \a u32.
+#define MSB0(u32) MSB0W(u32) //!< Most significant byte of 1st rank of \a u32.
+
+//! @}
+
+/**
+ * \brief Calculate \f$ \left\lceil \frac{a}{b} \right\rceil \f$ using
+ * integer arithmetic.
+ *
+ * \param a An integer
+ * \param b Another integer
+ *
+ * \return (\a a / \a b) rounded up to the nearest integer.
+ */
+#define div_ceil(a, b) (((a) + (b) - 1) / (b))
+
+#endif // #ifndef __ASSEMBLY__
+
+
+#if defined(__ICCARM__)
+#define SHORTENUM __packed
+#elif defined(__GNUC__)
+#define SHORTENUM __attribute__((packed))
+#endif
+
+/* No operation */
+#if defined(__ICCARM__)
+#define nop() __no_operation()
+#elif defined(__GNUC__)
+#define nop() (__NOP())
+#endif
+
+#define FLASH_DECLARE(x) const x
+#define FLASH_EXTERN(x) extern const x
+#define PGM_READ_BYTE(x) *(x)
+#define PGM_READ_WORD(x) *(x)
+#define PGM_READ_DWORD(x) *(x)
+#define MEMCPY_ENDIAN memcpy
+#define PGM_READ_BLOCK(dst, src, len) memcpy((dst), (src), (len))
+
+/*Defines the Flash Storage for the request and response of MAC*/
+#define CMD_ID_OCTET (0)
+
+/* Converting of values from CPU endian to little endian. */
+#define CPU_ENDIAN_TO_LE16(x) (x)
+#define CPU_ENDIAN_TO_LE32(x) (x)
+#define CPU_ENDIAN_TO_LE64(x) (x)
+
+/* Converting of values from little endian to CPU endian. */
+#define LE16_TO_CPU_ENDIAN(x) (x)
+#define LE32_TO_CPU_ENDIAN(x) (x)
+#define LE64_TO_CPU_ENDIAN(x) (x)
+
+/* Converting of constants from little endian to CPU endian. */
+#define CLE16_TO_CPU_ENDIAN(x) (x)
+#define CLE32_TO_CPU_ENDIAN(x) (x)
+#define CLE64_TO_CPU_ENDIAN(x) (x)
+
+/* Converting of constants from CPU endian to little endian. */
+#define CCPU_ENDIAN_TO_LE16(x) (x)
+#define CCPU_ENDIAN_TO_LE32(x) (x)
+#define CCPU_ENDIAN_TO_LE64(x) (x)
+
+#define ADDR_COPY_DST_SRC_16(dst, src) ((dst) = (src))
+#define ADDR_COPY_DST_SRC_64(dst, src) ((dst) = (src))
+
+/**
+ * @brief Converts a 64-Bit value into a 8 Byte array
+ *
+ * @param[in] value 64-Bit value
+ * @param[out] data Pointer to the 8 Byte array to be updated with 64-Bit value
+ * @ingroup apiPalApi
+ */
+static inline void convert_64_bit_to_byte_array(uint64_t value, uint8_t *data)
+{
+ uint8_t val_index = 0;
+
+ while (val_index < 8)
+ {
+ data[val_index++] = value & 0xFF;
+ value = value >> 8;
+ }
+}
+
+/**
+ * @brief Converts a 16-Bit value into a 2 Byte array
+ *
+ * @param[in] value 16-Bit value
+ * @param[out] data Pointer to the 2 Byte array to be updated with 16-Bit value
+ * @ingroup apiPalApi
+ */
+static inline void convert_16_bit_to_byte_array(uint16_t value, uint8_t *data)
+{
+ data[0] = value & 0xFF;
+ data[1] = (value >> 8) & 0xFF;
+}
+
+/* Converts a 16-Bit value into a 2 Byte array */
+static inline void convert_spec_16_bit_to_byte_array(uint16_t value, uint8_t *data)
+{
+ data[0] = value & 0xFF;
+ data[1] = (value >> 8) & 0xFF;
+}
+
+/* Converts a 16-Bit value into a 2 Byte array */
+static inline void convert_16_bit_to_byte_address(uint16_t value, uint8_t *data)
+{
+ data[0] = value & 0xFF;
+ data[1] = (value >> 8) & 0xFF;
+}
+
+/*
+ * @brief Converts a 2 Byte array into a 16-Bit value
+ *
+ * @param data Specifies the pointer to the 2 Byte array
+ *
+ * @return 16-Bit value
+ * @ingroup apiPalApi
+ */
+static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
+{
+ return (data[0] | ((uint16_t)data[1] << 8));
+}
+
+/* Converts a 8 Byte array into a 32-Bit value */
+static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
+{
+ union
+ {
+ uint32_t u32;
+ uint8_t u8[8];
+ }long_addr;
+ uint8_t index;
+ for (index = 0; index < 4; index++)
+ {
+ long_addr.u8[index] = *data++;
+ }
+ return long_addr.u32;
+}
+
+/**
+ * @brief Converts a 8 Byte array into a 64-Bit value
+ *
+ * @param data Specifies the pointer to the 8 Byte array
+ *
+ * @return 64-Bit value
+ * @ingroup apiPalApi
+ */
+static inline uint64_t convert_byte_array_to_64_bit(uint8_t *data)
+{
+ union
+ {
+ uint64_t u64;
+ uint8_t u8[8];
+ } long_addr;
+
+ uint8_t val_index;
+
+ for (val_index = 0; val_index < 8; val_index++)
+ {
+ long_addr.u8[val_index] = *data++;
+ }
+
+ return long_addr.u64;
+}
+/**
+ * \}
+ */
+
+#endif /* UTILS_COMPILER_H */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/conf_access.h b/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
new file mode 100644
index 0000000000..a87e7c005c
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_access.h
@@ -0,0 +1,115 @@
+/**
+ * \file
+ *
+ * \brief Memory access control configuration file.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _CONF_ACCESS_H_
+#define _CONF_ACCESS_H_
+
+#include "compiler.h"
+
+
+/*! \name Activation of Logical Unit Numbers
+ */
+//! @{
+#define LUN_0 ENABLE //!< SD/MMC Card over MCI Slot 0.
+#define LUN_1 DISABLE
+#define LUN_2 DISABLE
+#define LUN_3 DISABLE
+#define LUN_4 DISABLE
+#define LUN_5 DISABLE
+#define LUN_6 DISABLE
+#define LUN_7 DISABLE
+#define LUN_USB DISABLE
+//! @}
+
+/*! \name LUN 0 Definitions
+ */
+//! @{
+#define SD_MMC_SPI_MEM LUN_0
+#define LUN_ID_SD_MMC_SPI_MEM LUN_ID_0
+#define LUN_0_INCLUDE "sd_mmc_spi_mem.h"
+#define Lun_0_test_unit_ready sd_mmc_spi_test_unit_ready
+#define Lun_0_read_capacity sd_mmc_spi_read_capacity
+#define Lun_0_unload sd_mmc_spi_unload
+#define Lun_0_wr_protect sd_mmc_spi_wr_protect
+#define Lun_0_removal sd_mmc_spi_removal
+#define Lun_0_usb_read_10 sd_mmc_spi_usb_read_10
+#define Lun_0_usb_write_10 sd_mmc_spi_usb_write_10
+#define LUN_0_NAME "\"SD/MMC Card\""
+//! @}
+
+
+/*! \name Actions Associated with Memory Accesses
+ *
+ * Write here the action to associate with each memory access.
+ *
+ * \warning Be careful not to waste time in order not to disturb the functions.
+ */
+//! @{
+#define memory_start_read_action(nb_sectors)
+#define memory_stop_read_action()
+#define memory_start_write_action(nb_sectors)
+#define memory_stop_write_action()
+//! @}
+
+/*! \name Activation of Interface Features
+ */
+//! @{
+#define ACCESS_USB true //!< MEM <-> USB interface.
+#define ACCESS_MEM_TO_RAM false //!< MEM <-> RAM interface.
+#define ACCESS_STREAM false //!< Streaming MEM <-> MEM interface.
+#define ACCESS_STREAM_RECORD false //!< Streaming MEM <-> MEM interface in record mode.
+#define ACCESS_MEM_TO_MEM false //!< MEM <-> MEM interface.
+#define ACCESS_CODEC false //!< Codec interface.
+//! @}
+
+/*! \name Specific Options for Access Control
+ */
+//! @{
+#define GLOBAL_WR_PROTECT false //!< Management of a global write protection.
+//! @}
+
+
+#endif // _CONF_ACCESS_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/conf_clock.h b/Marlin/src/HAL/HAL_DUE/usb/conf_clock.h
new file mode 100644
index 0000000000..d0f68500ad
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_clock.h
@@ -0,0 +1,100 @@
+/**
+ * \file
+ *
+ * \brief SAM3X clock configuration.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef CONF_CLOCK_H_INCLUDED
+#define CONF_CLOCK_H_INCLUDED
+
+// ===== System Clock (MCK) Source Options
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_SLCK_RC
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_SLCK_XTAL
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_SLCK_BYPASS
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_8M_RC
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_12M_RC
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_XTAL
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_BYPASS
+#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK
+//#define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_UPLLCK
+
+// ===== System Clock (MCK) Prescaler Options (Fmck = Fsys / (SYSCLK_PRES))
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
+#define CONFIG_SYSCLK_PRES SYSCLK_PRES_2
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_4
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_8
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_16
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_32
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_64
+//#define CONFIG_SYSCLK_PRES SYSCLK_PRES_3
+
+// ===== PLL0 (A) Options (Fpll = (Fclk * PLL_mul) / PLL_div)
+// Use mul and div effective values here.
+#define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL
+#define CONFIG_PLL0_MUL 14
+#define CONFIG_PLL0_DIV 1
+
+// ===== UPLL (UTMI) Hardware fixed at 480MHz.
+
+// ===== USB Clock Source Options (Fusb = FpllX / USB_div)
+// Use div effective value here.
+//#define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL0
+#define CONFIG_USBCLK_SOURCE USBCLK_SRC_UPLL
+#define CONFIG_USBCLK_DIV 1
+
+// ===== Target frequency (System clock)
+// - XTAL frequency: 12MHz
+// - System clock source: PLLA
+// - System clock prescaler: 2 (divided by 2)
+// - PLLA source: XTAL
+// - PLLA output: XTAL * 14 / 1
+// - System clock is: 12 * 14 / 1 /2 = 84MHz
+// ===== Target frequency (USB Clock)
+// - USB clock source: UPLL
+// - USB clock divider: 1 (not divided)
+// - UPLL frequency: 480MHz
+// - USB clock: 480 / 1 = 480MHz
+
+
+#endif /* CONF_CLOCK_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h
new file mode 100644
index 0000000000..8227fd6fc7
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/conf_usb.h
@@ -0,0 +1,287 @@
+/**
+ * \file
+ *
+ * \brief USB configuration file
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _CONF_USB_H_
+#define _CONF_USB_H_
+
+#include "compiler.h"
+
+/**
+ * USB Device Configuration
+ * @{
+ */
+
+//! Device definition (mandatory)
+#define USB_DEVICE_VENDOR_ID 0x03EB /* ATMEL VID */
+#define USB_DEVICE_PRODUCT_ID 0x2424 /* MSC / CDC */
+#define USB_DEVICE_MAJOR_VERSION 1
+#define USB_DEVICE_MINOR_VERSION 0
+#define USB_DEVICE_POWER 100 // Consumption on Vbus line (mA)
+#define USB_DEVICE_ATTR \
+ (USB_CONFIG_ATTR_SELF_POWERED)
+// (USB_CONFIG_ATTR_BUS_POWERED)
+// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
+// (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
+
+//! USB Device string definitions (Optional)
+#define USB_DEVICE_MANUFACTURE_NAME "MARLIN 3D"
+#define USB_DEVICE_PRODUCT_NAME "CDC and MSC"
+#define USB_DEVICE_SERIAL_NAME "123985739853" // Disk SN for MSC
+
+/**
+ * Device speeds support
+ * Low speed not supported by CDC and MSC
+ * @{
+ */
+
+//! To define a Low speed device
+//#define USB_DEVICE_LOW_SPEED
+
+//! To authorize the High speed
+#if (UC3A3||UC3A4)
+# define USB_DEVICE_HS_SUPPORT
+#elif (SAM3XA||SAM3U)
+# define USB_DEVICE_HS_SUPPORT
+#endif
+//@}
+
+
+/**
+ * USB Device Callbacks definitions (Optional)
+ * @{
+ */
+#define UDC_VBUS_EVENT(b_vbus_high)
+#define UDC_SOF_EVENT()
+#define UDC_SUSPEND_EVENT()
+#define UDC_RESUME_EVENT()
+#define UDC_GET_EXTRA_STRING() usb_task_extra_string()
+//@}
+
+/**
+ * USB Device low level configuration
+ * When only one interface is used, these configurations are defined by the class module.
+ * For composite device, these configuration must be defined here
+ * @{
+ */
+//! Control endpoint size
+#define USB_DEVICE_EP_CTRL_SIZE 64
+
+//! Two interfaces for this device (CDC COM + CDC DATA + MSC)
+#define USB_DEVICE_NB_INTERFACE 3
+
+//! 5 endpoints used by CDC and MSC interfaces
+#if SAM3U
+// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
+// (6 | USB_EP_DIR_IN) // CDC TX
+// (5 | USB_EP_DIR_OUT) // CDC RX
+// (1 | USB_EP_DIR_IN) // MSC IN
+// (2 | USB_EP_DIR_OUT) // MSC OUT
+# define USB_DEVICE_MAX_EP 6
+# if defined(USB_DEVICE_HS_SUPPORT)
+// In HS mode, size of bulk endpoints are 512
+// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
+// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
+// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
+# define UDD_BULK_NB_BANK(ep) ((ep == 5 || ep== 6) ? 1 : 2)
+#endif
+#else
+// (3 | USB_EP_DIR_IN) // CDC Notify endpoint
+// (4 | USB_EP_DIR_IN) // CDC TX
+// (5 | USB_EP_DIR_OUT) // CDC RX
+// (1 | USB_EP_DIR_IN) // MSC IN
+// (2 | USB_EP_DIR_OUT) // MSC OUT
+# define USB_DEVICE_MAX_EP 5
+# if SAM3XA && defined(USB_DEVICE_HS_SUPPORT)
+// In HS mode, size of bulk endpoints are 512
+// If CDC and MSC endpoints all uses 2 banks, DPRAM is not enough: 4 bulk
+// endpoints requires 4K bytes. So reduce the number of banks of CDC bulk
+// endpoints to use less DPRAM. Keep MSC setting to keep MSC performance.
+# define UDD_BULK_NB_BANK(ep) ((ep == 4 || ep== 5) ? 1 : 2)
+# endif
+#endif
+//@}
+
+//@}
+
+
+/**
+ * USB Interface Configuration
+ * @{
+ */
+/**
+ * Configuration of CDC interface
+ * @{
+ */
+
+//! Define one USB communication ports
+#define UDI_CDC_PORT_NB 1
+
+//! Interface callback definition
+#define UDI_CDC_ENABLE_EXT(port) usb_task_cdc_enable(port)
+#define UDI_CDC_DISABLE_EXT(port) usb_task_cdc_disable(port)
+#define UDI_CDC_RX_NOTIFY(port) usb_task_cdc_rx_notify(port)
+#define UDI_CDC_TX_EMPTY_NOTIFY(port)
+#define UDI_CDC_SET_CODING_EXT(port,cfg) usb_task_cdc_config(port,cfg)
+#define UDI_CDC_SET_DTR_EXT(port,set) usb_task_cdc_set_dtr(port,set)
+#define UDI_CDC_SET_RTS_EXT(port,set)
+
+//! Define it when the transfer CDC Device to Host is a low rate (<512000 bauds)
+//! to reduce CDC buffers size
+//#define UDI_CDC_LOW_RATE
+
+//! Default configuration of communication port
+#define UDI_CDC_DEFAULT_RATE 115200
+#define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
+#define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
+#define UDI_CDC_DEFAULT_DATABITS 8
+
+//! Enable id string of interface to add an extra USB string
+#define UDI_CDC_IAD_STRING_ID 4
+
+/**
+ * USB CDC low level configuration
+ * In standalone these configurations are defined by the CDC module.
+ * For composite device, these configuration must be defined here
+ * @{
+ */
+//! Endpoint numbers definition
+#if SAM3U
+# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+# define UDI_CDC_DATA_EP_IN_0 (6 | USB_EP_DIR_IN) // TX
+# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
+#else
+# define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+# define UDI_CDC_DATA_EP_IN_0 (4 | USB_EP_DIR_IN) // TX
+# define UDI_CDC_DATA_EP_OUT_0 (5 | USB_EP_DIR_OUT)// RX
+#endif
+
+//! Interface numbers
+#define UDI_CDC_COMM_IFACE_NUMBER_0 0
+#define UDI_CDC_DATA_IFACE_NUMBER_0 1
+//@}
+//@}
+
+
+/**
+ * Configuration of MSC interface
+ * @{
+ */
+//! Vendor name and Product version of MSC interface
+#define UDI_MSC_GLOBAL_VENDOR_ID \
+ 'M', 'A', 'R', 'L', 'I', 'N', '3', 'D'
+#define UDI_MSC_GLOBAL_PRODUCT_VERSION \
+ '1', '.', '0', '0'
+
+//! Interface callback definition
+#define UDI_MSC_ENABLE_EXT() usb_task_msc_enable()
+#define UDI_MSC_DISABLE_EXT() usb_task_msc_disable()
+
+//! Enable id string of interface to add an extra USB string
+#define UDI_MSC_STRING_ID 5
+
+/**
+ * USB MSC low level configuration
+ * In standalone these configurations are defined by the MSC module.
+ * For composite device, these configuration must be defined here
+ * @{
+ */
+//! Endpoint numbers definition
+#define UDI_MSC_EP_IN (1 | USB_EP_DIR_IN)
+#define UDI_MSC_EP_OUT (2 | USB_EP_DIR_OUT)
+
+//! Interface number
+#define UDI_MSC_IFACE_NUMBER 2
+//@}
+//@}
+
+//@}
+
+
+/**
+ * Description of Composite Device
+ * @{
+ */
+//! USB Interfaces descriptor structure
+#define UDI_COMPOSITE_DESC_T \
+ usb_iad_desc_t udi_cdc_iad; \
+ udi_cdc_comm_desc_t udi_cdc_comm; \
+ udi_cdc_data_desc_t udi_cdc_data; \
+ udi_msc_desc_t udi_msc
+
+//! USB Interfaces descriptor value for Full Speed
+#define UDI_COMPOSITE_DESC_FS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
+ .udi_msc = UDI_MSC_DESC_FS
+
+//! USB Interfaces descriptor value for High Speed
+#define UDI_COMPOSITE_DESC_HS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
+ .udi_msc = UDI_MSC_DESC_HS
+
+//! USB Interface APIs
+#define UDI_COMPOSITE_API \
+ &udi_api_cdc_comm, \
+ &udi_api_cdc_data, \
+ &udi_api_msc
+//@}
+
+
+/**
+ * USB Device Driver Configuration
+ * @{
+ */
+//@}
+
+//! The includes of classes and other headers must be done at the end of this file to avoid compile error
+#include "udi_cdc.h"
+#include "udi_msc.h"
+#include "usb_task.h"
+
+#endif // _CONF_USB_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.c b/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.c
new file mode 100644
index 0000000000..a57c54fee6
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.c
@@ -0,0 +1,646 @@
+/*****************************************************************************
+ *
+ * \file
+ *
+ * \brief Abstraction layer for memory interfaces.
+ *
+ * This module contains the interfaces:
+ * - MEM <-> USB;
+ * - MEM <-> RAM;
+ * - MEM <-> MEM.
+ *
+ * This module may be configured and expanded to support the following features:
+ * - write-protected globals;
+ * - password-protected data;
+ * - specific features;
+ * - etc.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ ******************************************************************************/
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+//_____ I N C L U D E S ____________________________________________________
+
+#include "compiler.h"
+#include "preprocessor.h"
+#ifdef FREERTOS_USED
+#include "FreeRTOS.h"
+#include "semphr.h"
+#endif
+#include "ctrl_access.h"
+
+
+//_____ D E F I N I T I O N S ______________________________________________
+
+#ifdef FREERTOS_USED
+
+/*! \name LUN Access Protection Macros
+ */
+//! @{
+
+/*! \brief Locks accesses to LUNs.
+ *
+ * \return \c true if the access was successfully locked, else \c false.
+ */
+#define Ctrl_access_lock() ctrl_access_lock()
+
+/*! \brief Unlocks accesses to LUNs.
+ */
+#define Ctrl_access_unlock() xSemaphoreGive(ctrl_access_semphr)
+
+//! @}
+
+//! Handle to the semaphore protecting accesses to LUNs.
+static xSemaphoreHandle ctrl_access_semphr = NULL;
+
+#else
+
+/*! \name LUN Access Protection Macros
+ */
+//! @{
+
+/*! \brief Locks accesses to LUNs.
+ *
+ * \return \c true if the access was successfully locked, else \c false.
+ */
+#define Ctrl_access_lock() true
+
+/*! \brief Unlocks accesses to LUNs.
+ */
+#define Ctrl_access_unlock()
+
+//! @}
+
+#endif // FREERTOS_USED
+
+
+#if MAX_LUN
+
+/*! \brief Initializes an entry of the LUN descriptor table.
+ *
+ * \param lun Logical Unit Number.
+ *
+ * \return LUN descriptor table entry initializer.
+ */
+#if ACCESS_USB == true && ACCESS_MEM_TO_RAM == true
+#define Lun_desc_entry(lun) \
+ {\
+ TPASTE3(Lun_, lun, _test_unit_ready),\
+ TPASTE3(Lun_, lun, _read_capacity),\
+ TPASTE3(Lun_, lun, _unload),\
+ TPASTE3(Lun_, lun, _wr_protect),\
+ TPASTE3(Lun_, lun, _removal),\
+ TPASTE3(Lun_, lun, _usb_read_10),\
+ TPASTE3(Lun_, lun, _usb_write_10),\
+ TPASTE3(Lun_, lun, _mem_2_ram),\
+ TPASTE3(Lun_, lun, _ram_2_mem),\
+ TPASTE3(LUN_, lun, _NAME)\
+ }
+#elif ACCESS_USB == true
+#define Lun_desc_entry(lun) \
+ {\
+ TPASTE3(Lun_, lun, _test_unit_ready),\
+ TPASTE3(Lun_, lun, _read_capacity),\
+ TPASTE3(Lun_, lun, _unload),\
+ TPASTE3(Lun_, lun, _wr_protect),\
+ TPASTE3(Lun_, lun, _removal),\
+ TPASTE3(Lun_, lun, _usb_read_10),\
+ TPASTE3(Lun_, lun, _usb_write_10),\
+ TPASTE3(LUN_, lun, _NAME)\
+ }
+#elif ACCESS_MEM_TO_RAM == true
+#define Lun_desc_entry(lun) \
+ {\
+ TPASTE3(Lun_, lun, _test_unit_ready),\
+ TPASTE3(Lun_, lun, _read_capacity),\
+ TPASTE3(Lun_, lun, _unload),\
+ TPASTE3(Lun_, lun, _wr_protect),\
+ TPASTE3(Lun_, lun, _removal),\
+ TPASTE3(Lun_, lun, _mem_2_ram),\
+ TPASTE3(Lun_, lun, _ram_2_mem),\
+ TPASTE3(LUN_, lun, _NAME)\
+ }
+#else
+#define Lun_desc_entry(lun) \
+ {\
+ TPASTE3(Lun_, lun, _test_unit_ready),\
+ TPASTE3(Lun_, lun, _read_capacity),\
+ TPASTE3(Lun_, lun, _unload),\
+ TPASTE3(Lun_, lun, _wr_protect),\
+ TPASTE3(Lun_, lun, _removal),\
+ TPASTE3(LUN_, lun, _NAME)\
+ }
+#endif
+
+//! LUN descriptor table.
+static const struct
+{
+ Ctrl_status (*test_unit_ready)(void);
+ Ctrl_status (*read_capacity)(U32 *);
+ bool (*unload)(bool);
+ bool (*wr_protect)(void);
+ bool (*removal)(void);
+#if ACCESS_USB == true
+ Ctrl_status (*usb_read_10)(U32, U16);
+ Ctrl_status (*usb_write_10)(U32, U16);
+#endif
+#if ACCESS_MEM_TO_RAM == true
+ Ctrl_status (*mem_2_ram)(U32, void *);
+ Ctrl_status (*ram_2_mem)(U32, const void *);
+#endif
+ const char *name;
+} lun_desc[MAX_LUN] =
+{
+#if LUN_0 == ENABLE
+# ifndef Lun_0_unload
+# define Lun_0_unload NULL
+# endif
+ Lun_desc_entry(0),
+#endif
+#if LUN_1 == ENABLE
+# ifndef Lun_1_unload
+# define Lun_1_unload NULL
+# endif
+ Lun_desc_entry(1),
+#endif
+#if LUN_2 == ENABLE
+# ifndef Lun_2_unload
+# define Lun_2_unload NULL
+# endif
+ Lun_desc_entry(2),
+#endif
+#if LUN_3 == ENABLE
+# ifndef Lun_3_unload
+# define Lun_3_unload NULL
+# endif
+ Lun_desc_entry(3),
+#endif
+#if LUN_4 == ENABLE
+# ifndef Lun_4_unload
+# define Lun_4_unload NULL
+# endif
+ Lun_desc_entry(4),
+#endif
+#if LUN_5 == ENABLE
+# ifndef Lun_5_unload
+# define Lun_5_unload NULL
+# endif
+ Lun_desc_entry(5),
+#endif
+#if LUN_6 == ENABLE
+# ifndef Lun_6_unload
+# define Lun_6_unload NULL
+# endif
+ Lun_desc_entry(6),
+#endif
+#if LUN_7 == ENABLE
+# ifndef Lun_7_unload
+# define Lun_7_unload NULL
+# endif
+ Lun_desc_entry(7)
+#endif
+};
+
+#endif
+
+
+#if GLOBAL_WR_PROTECT == true
+bool g_wr_protect;
+#endif
+
+
+/*! \name Control Interface
+ */
+//! @{
+
+
+#ifdef FREERTOS_USED
+
+bool ctrl_access_init(void)
+{
+ // If the handle to the protecting semaphore is not valid,
+ if (!ctrl_access_semphr)
+ {
+ // try to create the semaphore.
+ vSemaphoreCreateBinary(ctrl_access_semphr);
+
+ // If the semaphore could not be created, there is no backup solution.
+ if (!ctrl_access_semphr) return false;
+ }
+
+ return true;
+}
+
+
+/*! \brief Locks accesses to LUNs.
+ *
+ * \return \c true if the access was successfully locked, else \c false.
+ */
+static bool ctrl_access_lock(void)
+{
+ // If the semaphore could not be created, there is no backup solution.
+ if (!ctrl_access_semphr) return false;
+
+ // Wait for the semaphore.
+ while (!xSemaphoreTake(ctrl_access_semphr, portMAX_DELAY));
+
+ return true;
+}
+
+#endif // FREERTOS_USED
+
+
+U8 get_nb_lun(void)
+{
+#if MEM_USB == ENABLE
+# ifndef Lun_usb_get_lun
+# define Lun_usb_get_lun() host_get_lun()
+# endif
+ U8 nb_lun;
+
+ if (!Ctrl_access_lock()) return MAX_LUN;
+
+ nb_lun = MAX_LUN + Lun_usb_get_lun();
+
+ Ctrl_access_unlock();
+
+ return nb_lun;
+#else
+ return MAX_LUN;
+#endif
+}
+
+
+U8 get_cur_lun(void)
+{
+ return LUN_ID_0;
+}
+
+
+Ctrl_status mem_test_unit_ready(U8 lun)
+{
+ Ctrl_status status;
+
+ if (!Ctrl_access_lock()) return CTRL_FAIL;
+
+ status =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].test_unit_ready() :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_test_unit_ready(lun - LUN_ID_USB);
+#else
+ CTRL_FAIL;
+#endif
+
+ Ctrl_access_unlock();
+
+ return status;
+}
+
+
+Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
+{
+ Ctrl_status status;
+
+ if (!Ctrl_access_lock()) return CTRL_FAIL;
+
+ status =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].read_capacity(u32_nb_sector) :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_read_capacity(lun - LUN_ID_USB, u32_nb_sector);
+#else
+ CTRL_FAIL;
+#endif
+
+ Ctrl_access_unlock();
+
+ return status;
+}
+
+
+U8 mem_sector_size(U8 lun)
+{
+ U8 sector_size;
+
+ if (!Ctrl_access_lock()) return 0;
+
+ sector_size =
+#if MAX_LUN
+ (lun < MAX_LUN) ? 1 :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_read_sector_size(lun - LUN_ID_USB);
+#else
+ 0;
+#endif
+
+ Ctrl_access_unlock();
+
+ return sector_size;
+}
+
+
+bool mem_unload(U8 lun, bool unload)
+{
+ bool unloaded;
+#if !MAX_LUN || !defined(Lun_usb_unload)
+ UNUSED(lun);
+#endif
+
+ if (!Ctrl_access_lock()) return false;
+
+ unloaded =
+#if MAX_LUN
+ (lun < MAX_LUN) ?
+ (lun_desc[lun].unload ?
+ lun_desc[lun].unload(unload) : !unload) :
+#endif
+#if LUN_USB == ENABLE
+# if defined(Lun_usb_unload)
+ Lun_usb_unload(lun - LUN_ID_USB, unload);
+# else
+ !unload; /* Can not unload: load success, unload fail */
+# endif
+#else
+ false; /* No mem, unload/load fail */
+#endif
+
+ Ctrl_access_unlock();
+
+ return unloaded;
+}
+
+bool mem_wr_protect(U8 lun)
+{
+ bool wr_protect;
+
+ if (!Ctrl_access_lock()) return true;
+
+ wr_protect =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].wr_protect() :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_wr_protect(lun - LUN_ID_USB);
+#else
+ true;
+#endif
+
+ Ctrl_access_unlock();
+
+ return wr_protect;
+}
+
+
+bool mem_removal(U8 lun)
+{
+ bool removal;
+#if MAX_LUN==0
+ UNUSED(lun);
+#endif
+
+ if (!Ctrl_access_lock()) return true;
+
+ removal =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].removal() :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_removal();
+#else
+ true;
+#endif
+
+ Ctrl_access_unlock();
+
+ return removal;
+}
+
+
+const char *mem_name(U8 lun)
+{
+#if MAX_LUN==0
+ UNUSED(lun);
+#endif
+ return
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].name :
+#endif
+#if LUN_USB == ENABLE
+ LUN_USB_NAME;
+#else
+ NULL;
+#endif
+}
+
+
+//! @}
+
+
+#if ACCESS_USB == true
+
+/*! \name MEM <-> USB Interface
+ */
+//! @{
+
+
+Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
+{
+ Ctrl_status status;
+
+ if (!Ctrl_access_lock()) return CTRL_FAIL;
+
+ memory_start_read_action(nb_sector);
+ status =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].usb_read_10(addr, nb_sector) :
+#endif
+ CTRL_FAIL;
+ memory_stop_read_action();
+
+ Ctrl_access_unlock();
+
+ return status;
+}
+
+
+Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
+{
+ Ctrl_status status;
+
+ if (!Ctrl_access_lock()) return CTRL_FAIL;
+
+ memory_start_write_action(nb_sector);
+ status =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].usb_write_10(addr, nb_sector) :
+#endif
+ CTRL_FAIL;
+ memory_stop_write_action();
+
+ Ctrl_access_unlock();
+
+ return status;
+}
+
+
+//! @}
+
+#endif // ACCESS_USB == true
+
+
+#if ACCESS_MEM_TO_RAM == true
+
+/*! \name MEM <-> RAM Interface
+ */
+//! @{
+
+
+Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
+{
+ Ctrl_status status;
+#if MAX_LUN==0
+ UNUSED(lun);
+#endif
+
+ if (!Ctrl_access_lock()) return CTRL_FAIL;
+
+ memory_start_read_action(1);
+ status =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].mem_2_ram(addr, ram) :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_mem_2_ram(addr, ram);
+#else
+ CTRL_FAIL;
+#endif
+ memory_stop_read_action();
+
+ Ctrl_access_unlock();
+
+ return status;
+}
+
+
+Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
+{
+ Ctrl_status status;
+#if MAX_LUN==0
+ UNUSED(lun);
+#endif
+
+ if (!Ctrl_access_lock()) return CTRL_FAIL;
+
+ memory_start_write_action(1);
+ status =
+#if MAX_LUN
+ (lun < MAX_LUN) ? lun_desc[lun].ram_2_mem(addr, ram) :
+#endif
+#if LUN_USB == ENABLE
+ Lun_usb_ram_2_mem(addr, ram);
+#else
+ CTRL_FAIL;
+#endif
+ memory_stop_write_action();
+
+ Ctrl_access_unlock();
+
+ return status;
+}
+
+
+//! @}
+
+#endif // ACCESS_MEM_TO_RAM == true
+
+
+#if ACCESS_STREAM == true
+
+/*! \name Streaming MEM <-> MEM Interface
+ */
+//! @{
+
+
+ #if ACCESS_MEM_TO_MEM == true
+
+#include "fat.h"
+
+Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_addr, U16 nb_sector)
+{
+ COMPILER_ALIGNED(4)
+ static U8 sector_buf[FS_512B];
+ Ctrl_status status = CTRL_GOOD;
+
+ while (nb_sector--)
+ {
+ if ((status = memory_2_ram(src_lun, src_addr++, sector_buf)) != CTRL_GOOD) break;
+ if ((status = ram_2_memory(dest_lun, dest_addr++, sector_buf)) != CTRL_GOOD) break;
+ }
+
+ return status;
+}
+
+ #endif // ACCESS_MEM_TO_MEM == true
+
+
+Ctrl_status stream_state(U8 id)
+{
+ UNUSED(id);
+ return CTRL_GOOD;
+}
+
+
+U16 stream_stop(U8 id)
+{
+ UNUSED(id);
+ return 0;
+}
+
+
+//! @}
+
+#endif // ACCESS_STREAM == true
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.h b/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.h
new file mode 100644
index 0000000000..af6c8ceb96
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/ctrl_access.h
@@ -0,0 +1,402 @@
+/*****************************************************************************
+ *
+ * \file
+ *
+ * \brief Abstraction layer for memory interfaces.
+ *
+ * This module contains the interfaces:
+ * - MEM <-> USB;
+ * - MEM <-> RAM;
+ * - MEM <-> MEM.
+ *
+ * This module may be configured and expanded to support the following features:
+ * - write-protected globals;
+ * - password-protected data;
+ * - specific features;
+ * - etc.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ ******************************************************************************/
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+
+#ifndef _CTRL_ACCESS_H_
+#define _CTRL_ACCESS_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup group_common_services_storage_ctrl_access Memory Control Access
+ *
+ * Common abstraction layer for memory interfaces. It provides interfaces between:
+ * Memory and USB, Memory and RAM, Memory and Memory. Common API for XMEGA and UC3.
+ *
+ * \{
+ */
+
+#include "compiler.h"
+#include "conf_access.h"
+
+#ifndef SECTOR_SIZE
+#define SECTOR_SIZE 512
+#endif
+
+//! Status returned by CTRL_ACCESS interfaces.
+typedef enum
+{
+ CTRL_GOOD = PASS, //!< Success, memory ready.
+ CTRL_FAIL = FAIL, //!< An error occurred.
+ CTRL_NO_PRESENT = FAIL + 1, //!< Memory unplugged.
+ CTRL_BUSY = FAIL + 2 //!< Memory not initialized or changed.
+} Ctrl_status;
+
+
+// FYI: Each Logical Unit Number (LUN) corresponds to a memory.
+
+// Check LUN defines.
+#ifndef LUN_0
+ #error LUN_0 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_1
+ #error LUN_1 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_2
+ #error LUN_2 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_3
+ #error LUN_3 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_4
+ #error LUN_4 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_5
+ #error LUN_5 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_6
+ #error LUN_6 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_7
+ #error LUN_7 must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+#ifndef LUN_USB
+ #error LUN_USB must be defined as ENABLE or DISABLE in conf_access.h
+#endif
+
+/*! \name LUN IDs
+ */
+//! @{
+#define LUN_ID_0 (0) //!< First static LUN.
+#define LUN_ID_1 (LUN_ID_0 + LUN_0)
+#define LUN_ID_2 (LUN_ID_1 + LUN_1)
+#define LUN_ID_3 (LUN_ID_2 + LUN_2)
+#define LUN_ID_4 (LUN_ID_3 + LUN_3)
+#define LUN_ID_5 (LUN_ID_4 + LUN_4)
+#define LUN_ID_6 (LUN_ID_5 + LUN_5)
+#define LUN_ID_7 (LUN_ID_6 + LUN_6)
+#define MAX_LUN (LUN_ID_7 + LUN_7) //!< Number of static LUNs.
+#define LUN_ID_USB (MAX_LUN) //!< First dynamic LUN (USB host mass storage).
+//! @}
+
+
+// Include LUN header files.
+#if LUN_0 == ENABLE
+ #include LUN_0_INCLUDE
+#endif
+#if LUN_1 == ENABLE
+ #include LUN_1_INCLUDE
+#endif
+#if LUN_2 == ENABLE
+ #include LUN_2_INCLUDE
+#endif
+#if LUN_3 == ENABLE
+ #include LUN_3_INCLUDE
+#endif
+#if LUN_4 == ENABLE
+ #include LUN_4_INCLUDE
+#endif
+#if LUN_5 == ENABLE
+ #include LUN_5_INCLUDE
+#endif
+#if LUN_6 == ENABLE
+ #include LUN_6_INCLUDE
+#endif
+#if LUN_7 == ENABLE
+ #include LUN_7_INCLUDE
+#endif
+#if LUN_USB == ENABLE
+ #include LUN_USB_INCLUDE
+#endif
+
+
+// Check the configuration of write protection in conf_access.h.
+#ifndef GLOBAL_WR_PROTECT
+ #error GLOBAL_WR_PROTECT must be defined as true or false in conf_access.h
+#endif
+
+
+#if GLOBAL_WR_PROTECT == true
+
+//! Write protect.
+extern bool g_wr_protect;
+
+#endif
+
+
+/*! \name Control Interface
+ */
+//! @{
+
+#ifdef FREERTOS_USED
+
+/*! \brief Initializes the LUN access locker.
+ *
+ * \return \c true if the locker was successfully initialized, else \c false.
+ */
+extern bool ctrl_access_init(void);
+
+#endif // FREERTOS_USED
+
+/*! \brief Returns the number of LUNs.
+ *
+ * \return Number of LUNs in the system.
+ */
+extern U8 get_nb_lun(void);
+
+/*! \brief Returns the current LUN.
+ *
+ * \return Current LUN.
+ *
+ * \todo Implement.
+ */
+extern U8 get_cur_lun(void);
+
+/*! \brief Tests the memory state and initializes the memory if required.
+ *
+ * The TEST UNIT READY SCSI primary command allows an application client to poll
+ * a LUN until it is ready without having to allocate memory for returned data.
+ *
+ * This command may be used to check the media status of LUNs with removable
+ * media.
+ *
+ * \param lun Logical Unit Number.
+ *
+ * \return Status.
+ */
+extern Ctrl_status mem_test_unit_ready(U8 lun);
+
+/*! \brief Returns the address of the last valid sector (512 bytes) in the
+ * memory.
+ *
+ * \param lun Logical Unit Number.
+ * \param u32_nb_sector Pointer to the address of the last valid sector.
+ *
+ * \return Status.
+ */
+extern Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector);
+
+/*! \brief Returns the size of the physical sector.
+ *
+ * \param lun Logical Unit Number.
+ *
+ * \return Sector size (unit: 512 bytes).
+ */
+extern U8 mem_sector_size(U8 lun);
+
+/*! \brief Unload/load the medium.
+ *
+ * \param lun Logical Unit Number.
+ * \param unload \c true to unload the medium, \c false to load the medium.
+ *
+ * \return \c true if unload/load success, else \c false.
+ */
+extern bool mem_unload(U8 lun, bool unload);
+
+/*! \brief Returns the write-protection state of the memory.
+ *
+ * \param lun Logical Unit Number.
+ *
+ * \return \c true if the memory is write-protected, else \c false.
+ *
+ * \note Only used by removable memories with hardware-specific write
+ * protection.
+ */
+extern bool mem_wr_protect(U8 lun);
+
+/*! \brief Tells whether the memory is removable.
+ *
+ * \param lun Logical Unit Number.
+ *
+ * \return \c true if the memory is removable, else \c false.
+ */
+extern bool mem_removal(U8 lun);
+
+/*! \brief Returns a pointer to the LUN name.
+ *
+ * \param lun Logical Unit Number.
+ *
+ * \return Pointer to the LUN name string.
+ */
+extern const char *mem_name(U8 lun);
+
+//! @}
+
+
+#if ACCESS_USB == true
+
+/*! \name MEM <-> USB Interface
+ */
+//! @{
+
+/*! \brief Transfers data from the memory to USB.
+ *
+ * \param lun Logical Unit Number.
+ * \param addr Address of first memory sector to read.
+ * \param nb_sector Number of sectors to transfer.
+ *
+ * \return Status.
+ */
+extern Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector);
+
+/*! \brief Transfers data from USB to the memory.
+ *
+ * \param lun Logical Unit Number.
+ * \param addr Address of first memory sector to write.
+ * \param nb_sector Number of sectors to transfer.
+ *
+ * \return Status.
+ */
+extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector);
+
+//! @}
+
+#endif // ACCESS_USB == true
+
+
+#if ACCESS_MEM_TO_RAM == true
+
+/*! \name MEM <-> RAM Interface
+ */
+//! @{
+
+/*! \brief Copies 1 data sector from the memory to RAM.
+ *
+ * \param lun Logical Unit Number.
+ * \param addr Address of first memory sector to read.
+ * \param ram Pointer to RAM buffer to write.
+ *
+ * \return Status.
+ */
+extern Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram);
+
+/*! \brief Copies 1 data sector from RAM to the memory.
+ *
+ * \param lun Logical Unit Number.
+ * \param addr Address of first memory sector to write.
+ * \param ram Pointer to RAM buffer to read.
+ *
+ * \return Status.
+ */
+extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram);
+
+//! @}
+
+#endif // ACCESS_MEM_TO_RAM == true
+
+
+#if ACCESS_STREAM == true
+
+/*! \name Streaming MEM <-> MEM Interface
+ */
+//! @{
+
+//! Erroneous streaming data transfer ID.
+#define ID_STREAM_ERR 0xFF
+
+ #if ACCESS_MEM_TO_MEM == true
+
+/*! \brief Copies data from one memory to another.
+ *
+ * \param src_lun Source Logical Unit Number.
+ * \param src_addr Source address of first memory sector to read.
+ * \param dest_lun Destination Logical Unit Number.
+ * \param dest_addr Destination address of first memory sector to write.
+ * \param nb_sector Number of sectors to copy.
+ *
+ * \return Status.
+ */
+extern Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_addr, U16 nb_sector);
+
+ #endif // ACCESS_MEM_TO_MEM == true
+
+/*! \brief Returns the state of a streaming data transfer.
+ *
+ * \param id Transfer ID.
+ *
+ * \return Status.
+ *
+ * \todo Implement.
+ */
+extern Ctrl_status stream_state(U8 id);
+
+/*! \brief Stops a streaming data transfer.
+ *
+ * \param id Transfer ID.
+ *
+ * \return Number of remaining sectors.
+ *
+ * \todo Implement.
+ */
+extern U16 stream_stop(U8 id);
+
+//! @}
+
+#endif // ACCESS_STREAM == true
+
+/**
+ * \}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // _CTRL_ACCESS_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/genclk.h b/Marlin/src/HAL/HAL_DUE/usb/genclk.h
new file mode 100644
index 0000000000..895aba0352
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/genclk.h
@@ -0,0 +1,278 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific generic clock management.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef CHIP_GENCLK_H_INCLUDED
+#define CHIP_GENCLK_H_INCLUDED
+
+#include
+#include
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+/**
+ * \weakgroup genclk_group
+ * @{
+ */
+
+//! \name Programmable Clock Identifiers (PCK)
+//@{
+#define GENCLK_PCK_0 0 //!< PCK0 ID
+#define GENCLK_PCK_1 1 //!< PCK1 ID
+#define GENCLK_PCK_2 2 //!< PCK2 ID
+//@}
+
+//! \name Programmable Clock Sources (PCK)
+//@{
+
+enum genclk_source {
+ GENCLK_PCK_SRC_SLCK_RC = 0, //!< Internal 32kHz RC oscillator as PCK source clock
+ GENCLK_PCK_SRC_SLCK_XTAL = 1, //!< External 32kHz crystal oscillator as PCK source clock
+ GENCLK_PCK_SRC_SLCK_BYPASS = 2, //!< External 32kHz bypass oscillator as PCK source clock
+ GENCLK_PCK_SRC_MAINCK_4M_RC = 3, //!< Internal 4MHz RC oscillator as PCK source clock
+ GENCLK_PCK_SRC_MAINCK_8M_RC = 4, //!< Internal 8MHz RC oscillator as PCK source clock
+ GENCLK_PCK_SRC_MAINCK_12M_RC = 5, //!< Internal 12MHz RC oscillator as PCK source clock
+ GENCLK_PCK_SRC_MAINCK_XTAL = 6, //!< External crystal oscillator as PCK source clock
+ GENCLK_PCK_SRC_MAINCK_BYPASS = 7, //!< External bypass oscillator as PCK source clock
+ GENCLK_PCK_SRC_PLLACK = 8, //!< Use PLLACK as PCK source clock
+ GENCLK_PCK_SRC_PLLBCK = 9, //!< Use PLLBCK as PCK source clock
+ GENCLK_PCK_SRC_MCK = 10, //!< Use Master Clk as PCK source clock
+};
+
+//@}
+
+//! \name Programmable Clock Prescalers (PCK)
+//@{
+
+enum genclk_divider {
+ GENCLK_PCK_PRES_1 = PMC_PCK_PRES_CLK_1, //!< Set PCK clock prescaler to 1
+ GENCLK_PCK_PRES_2 = PMC_PCK_PRES_CLK_2, //!< Set PCK clock prescaler to 2
+ GENCLK_PCK_PRES_4 = PMC_PCK_PRES_CLK_4, //!< Set PCK clock prescaler to 4
+ GENCLK_PCK_PRES_8 = PMC_PCK_PRES_CLK_8, //!< Set PCK clock prescaler to 8
+ GENCLK_PCK_PRES_16 = PMC_PCK_PRES_CLK_16, //!< Set PCK clock prescaler to 16
+ GENCLK_PCK_PRES_32 = PMC_PCK_PRES_CLK_32, //!< Set PCK clock prescaler to 32
+ GENCLK_PCK_PRES_64 = PMC_PCK_PRES_CLK_64, //!< Set PCK clock prescaler to 64
+};
+
+//@}
+
+struct genclk_config {
+ uint32_t ctrl;
+};
+
+static inline void genclk_config_defaults(struct genclk_config *p_cfg,
+ uint32_t ul_id)
+{
+ ul_id = ul_id;
+ p_cfg->ctrl = 0;
+}
+
+static inline void genclk_config_read(struct genclk_config *p_cfg,
+ uint32_t ul_id)
+{
+ p_cfg->ctrl = PMC->PMC_PCK[ul_id];
+}
+
+static inline void genclk_config_write(const struct genclk_config *p_cfg,
+ uint32_t ul_id)
+{
+ PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
+}
+
+//! \name Programmable Clock Source and Prescaler configuration
+//@{
+
+static inline void genclk_config_set_source(struct genclk_config *p_cfg,
+ enum genclk_source e_src)
+{
+ p_cfg->ctrl &= (~PMC_PCK_CSS_Msk);
+
+ switch (e_src) {
+ case GENCLK_PCK_SRC_SLCK_RC:
+ case GENCLK_PCK_SRC_SLCK_XTAL:
+ case GENCLK_PCK_SRC_SLCK_BYPASS:
+ p_cfg->ctrl |= (PMC_PCK_CSS_SLOW_CLK);
+ break;
+
+ case GENCLK_PCK_SRC_MAINCK_4M_RC:
+ case GENCLK_PCK_SRC_MAINCK_8M_RC:
+ case GENCLK_PCK_SRC_MAINCK_12M_RC:
+ case GENCLK_PCK_SRC_MAINCK_XTAL:
+ case GENCLK_PCK_SRC_MAINCK_BYPASS:
+ p_cfg->ctrl |= (PMC_PCK_CSS_MAIN_CLK);
+ break;
+
+ case GENCLK_PCK_SRC_PLLACK:
+ p_cfg->ctrl |= (PMC_PCK_CSS_PLLA_CLK);
+ break;
+
+ case GENCLK_PCK_SRC_PLLBCK:
+ p_cfg->ctrl |= (PMC_PCK_CSS_UPLL_CLK);
+ break;
+
+ case GENCLK_PCK_SRC_MCK:
+ p_cfg->ctrl |= (PMC_PCK_CSS_MCK);
+ break;
+ }
+}
+
+static inline void genclk_config_set_divider(struct genclk_config *p_cfg,
+ uint32_t e_divider)
+{
+ p_cfg->ctrl &= ~PMC_PCK_PRES_Msk;
+ p_cfg->ctrl |= e_divider;
+}
+
+//@}
+
+static inline void genclk_enable(const struct genclk_config *p_cfg,
+ uint32_t ul_id)
+{
+ PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
+ pmc_enable_pck(ul_id);
+}
+
+static inline void genclk_disable(uint32_t ul_id)
+{
+ pmc_disable_pck(ul_id);
+}
+
+static inline void genclk_enable_source(enum genclk_source e_src)
+{
+ switch (e_src) {
+ case GENCLK_PCK_SRC_SLCK_RC:
+ if (!osc_is_ready(OSC_SLCK_32K_RC)) {
+ osc_enable(OSC_SLCK_32K_RC);
+ osc_wait_ready(OSC_SLCK_32K_RC);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_SLCK_XTAL:
+ if (!osc_is_ready(OSC_SLCK_32K_XTAL)) {
+ osc_enable(OSC_SLCK_32K_XTAL);
+ osc_wait_ready(OSC_SLCK_32K_XTAL);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_SLCK_BYPASS:
+ if (!osc_is_ready(OSC_SLCK_32K_BYPASS)) {
+ osc_enable(OSC_SLCK_32K_BYPASS);
+ osc_wait_ready(OSC_SLCK_32K_BYPASS);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_MAINCK_4M_RC:
+ if (!osc_is_ready(OSC_MAINCK_4M_RC)) {
+ osc_enable(OSC_MAINCK_4M_RC);
+ osc_wait_ready(OSC_MAINCK_4M_RC);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_MAINCK_8M_RC:
+ if (!osc_is_ready(OSC_MAINCK_8M_RC)) {
+ osc_enable(OSC_MAINCK_8M_RC);
+ osc_wait_ready(OSC_MAINCK_8M_RC);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_MAINCK_12M_RC:
+ if (!osc_is_ready(OSC_MAINCK_12M_RC)) {
+ osc_enable(OSC_MAINCK_12M_RC);
+ osc_wait_ready(OSC_MAINCK_12M_RC);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_MAINCK_XTAL:
+ if (!osc_is_ready(OSC_MAINCK_XTAL)) {
+ osc_enable(OSC_MAINCK_XTAL);
+ osc_wait_ready(OSC_MAINCK_XTAL);
+ }
+ break;
+
+ case GENCLK_PCK_SRC_MAINCK_BYPASS:
+ if (!osc_is_ready(OSC_MAINCK_BYPASS)) {
+ osc_enable(OSC_MAINCK_BYPASS);
+ osc_wait_ready(OSC_MAINCK_BYPASS);
+ }
+ break;
+
+#ifdef CONFIG_PLL0_SOURCE
+ case GENCLK_PCK_SRC_PLLACK:
+ pll_enable_config_defaults(0);
+ break;
+#endif
+
+#ifdef CONFIG_PLL1_SOURCE
+ case GENCLK_PCK_SRC_PLLBCK:
+ pll_enable_config_defaults(1);
+ break;
+#endif
+
+ case GENCLK_PCK_SRC_MCK:
+ break;
+
+ default:
+ Assert(false);
+ break;
+ }
+}
+
+//! @}
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+}
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+#endif /* CHIP_GENCLK_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/mrepeat.h b/Marlin/src/HAL/HAL_DUE/usb/mrepeat.h
new file mode 100644
index 0000000000..5a2017be99
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/mrepeat.h
@@ -0,0 +1,339 @@
+/**
+ * \file
+ *
+ * \brief Preprocessor macro repeating utils.
+ *
+ * Copyright (c) 2010-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _MREPEAT_H_
+#define _MREPEAT_H_
+
+/**
+ * \defgroup group_sam_utils_mrepeat Preprocessor - Macro Repeat
+ *
+ * \ingroup group_sam_utils
+ *
+ * \{
+ */
+
+#include "preprocessor.h"
+
+
+//! Maximal number of repetitions supported by MREPEAT.
+#define MREPEAT_LIMIT 256
+
+/*! \brief Macro repeat.
+ *
+ * This macro represents a horizontal repetition construct.
+ *
+ * \param count The number of repetitious calls to macro. Valid values range from 0 to MREPEAT_LIMIT.
+ * \param macro A binary operation of the form macro(n, data). This macro is expanded by MREPEAT with
+ * the current repetition number and the auxiliary data argument.
+ * \param data Auxiliary data passed to macro.
+ *
+ * \return macro(0, data) macro(1, data) ... macro(count - 1, data)
+ */
+#define MREPEAT(count, macro, data) TPASTE2(MREPEAT, count)(macro, data)
+
+#define MREPEAT0( macro, data)
+#define MREPEAT1( macro, data) MREPEAT0( macro, data) macro( 0, data)
+#define MREPEAT2( macro, data) MREPEAT1( macro, data) macro( 1, data)
+#define MREPEAT3( macro, data) MREPEAT2( macro, data) macro( 2, data)
+#define MREPEAT4( macro, data) MREPEAT3( macro, data) macro( 3, data)
+#define MREPEAT5( macro, data) MREPEAT4( macro, data) macro( 4, data)
+#define MREPEAT6( macro, data) MREPEAT5( macro, data) macro( 5, data)
+#define MREPEAT7( macro, data) MREPEAT6( macro, data) macro( 6, data)
+#define MREPEAT8( macro, data) MREPEAT7( macro, data) macro( 7, data)
+#define MREPEAT9( macro, data) MREPEAT8( macro, data) macro( 8, data)
+#define MREPEAT10( macro, data) MREPEAT9( macro, data) macro( 9, data)
+#define MREPEAT11( macro, data) MREPEAT10( macro, data) macro( 10, data)
+#define MREPEAT12( macro, data) MREPEAT11( macro, data) macro( 11, data)
+#define MREPEAT13( macro, data) MREPEAT12( macro, data) macro( 12, data)
+#define MREPEAT14( macro, data) MREPEAT13( macro, data) macro( 13, data)
+#define MREPEAT15( macro, data) MREPEAT14( macro, data) macro( 14, data)
+#define MREPEAT16( macro, data) MREPEAT15( macro, data) macro( 15, data)
+#define MREPEAT17( macro, data) MREPEAT16( macro, data) macro( 16, data)
+#define MREPEAT18( macro, data) MREPEAT17( macro, data) macro( 17, data)
+#define MREPEAT19( macro, data) MREPEAT18( macro, data) macro( 18, data)
+#define MREPEAT20( macro, data) MREPEAT19( macro, data) macro( 19, data)
+#define MREPEAT21( macro, data) MREPEAT20( macro, data) macro( 20, data)
+#define MREPEAT22( macro, data) MREPEAT21( macro, data) macro( 21, data)
+#define MREPEAT23( macro, data) MREPEAT22( macro, data) macro( 22, data)
+#define MREPEAT24( macro, data) MREPEAT23( macro, data) macro( 23, data)
+#define MREPEAT25( macro, data) MREPEAT24( macro, data) macro( 24, data)
+#define MREPEAT26( macro, data) MREPEAT25( macro, data) macro( 25, data)
+#define MREPEAT27( macro, data) MREPEAT26( macro, data) macro( 26, data)
+#define MREPEAT28( macro, data) MREPEAT27( macro, data) macro( 27, data)
+#define MREPEAT29( macro, data) MREPEAT28( macro, data) macro( 28, data)
+#define MREPEAT30( macro, data) MREPEAT29( macro, data) macro( 29, data)
+#define MREPEAT31( macro, data) MREPEAT30( macro, data) macro( 30, data)
+#define MREPEAT32( macro, data) MREPEAT31( macro, data) macro( 31, data)
+#define MREPEAT33( macro, data) MREPEAT32( macro, data) macro( 32, data)
+#define MREPEAT34( macro, data) MREPEAT33( macro, data) macro( 33, data)
+#define MREPEAT35( macro, data) MREPEAT34( macro, data) macro( 34, data)
+#define MREPEAT36( macro, data) MREPEAT35( macro, data) macro( 35, data)
+#define MREPEAT37( macro, data) MREPEAT36( macro, data) macro( 36, data)
+#define MREPEAT38( macro, data) MREPEAT37( macro, data) macro( 37, data)
+#define MREPEAT39( macro, data) MREPEAT38( macro, data) macro( 38, data)
+#define MREPEAT40( macro, data) MREPEAT39( macro, data) macro( 39, data)
+#define MREPEAT41( macro, data) MREPEAT40( macro, data) macro( 40, data)
+#define MREPEAT42( macro, data) MREPEAT41( macro, data) macro( 41, data)
+#define MREPEAT43( macro, data) MREPEAT42( macro, data) macro( 42, data)
+#define MREPEAT44( macro, data) MREPEAT43( macro, data) macro( 43, data)
+#define MREPEAT45( macro, data) MREPEAT44( macro, data) macro( 44, data)
+#define MREPEAT46( macro, data) MREPEAT45( macro, data) macro( 45, data)
+#define MREPEAT47( macro, data) MREPEAT46( macro, data) macro( 46, data)
+#define MREPEAT48( macro, data) MREPEAT47( macro, data) macro( 47, data)
+#define MREPEAT49( macro, data) MREPEAT48( macro, data) macro( 48, data)
+#define MREPEAT50( macro, data) MREPEAT49( macro, data) macro( 49, data)
+#define MREPEAT51( macro, data) MREPEAT50( macro, data) macro( 50, data)
+#define MREPEAT52( macro, data) MREPEAT51( macro, data) macro( 51, data)
+#define MREPEAT53( macro, data) MREPEAT52( macro, data) macro( 52, data)
+#define MREPEAT54( macro, data) MREPEAT53( macro, data) macro( 53, data)
+#define MREPEAT55( macro, data) MREPEAT54( macro, data) macro( 54, data)
+#define MREPEAT56( macro, data) MREPEAT55( macro, data) macro( 55, data)
+#define MREPEAT57( macro, data) MREPEAT56( macro, data) macro( 56, data)
+#define MREPEAT58( macro, data) MREPEAT57( macro, data) macro( 57, data)
+#define MREPEAT59( macro, data) MREPEAT58( macro, data) macro( 58, data)
+#define MREPEAT60( macro, data) MREPEAT59( macro, data) macro( 59, data)
+#define MREPEAT61( macro, data) MREPEAT60( macro, data) macro( 60, data)
+#define MREPEAT62( macro, data) MREPEAT61( macro, data) macro( 61, data)
+#define MREPEAT63( macro, data) MREPEAT62( macro, data) macro( 62, data)
+#define MREPEAT64( macro, data) MREPEAT63( macro, data) macro( 63, data)
+#define MREPEAT65( macro, data) MREPEAT64( macro, data) macro( 64, data)
+#define MREPEAT66( macro, data) MREPEAT65( macro, data) macro( 65, data)
+#define MREPEAT67( macro, data) MREPEAT66( macro, data) macro( 66, data)
+#define MREPEAT68( macro, data) MREPEAT67( macro, data) macro( 67, data)
+#define MREPEAT69( macro, data) MREPEAT68( macro, data) macro( 68, data)
+#define MREPEAT70( macro, data) MREPEAT69( macro, data) macro( 69, data)
+#define MREPEAT71( macro, data) MREPEAT70( macro, data) macro( 70, data)
+#define MREPEAT72( macro, data) MREPEAT71( macro, data) macro( 71, data)
+#define MREPEAT73( macro, data) MREPEAT72( macro, data) macro( 72, data)
+#define MREPEAT74( macro, data) MREPEAT73( macro, data) macro( 73, data)
+#define MREPEAT75( macro, data) MREPEAT74( macro, data) macro( 74, data)
+#define MREPEAT76( macro, data) MREPEAT75( macro, data) macro( 75, data)
+#define MREPEAT77( macro, data) MREPEAT76( macro, data) macro( 76, data)
+#define MREPEAT78( macro, data) MREPEAT77( macro, data) macro( 77, data)
+#define MREPEAT79( macro, data) MREPEAT78( macro, data) macro( 78, data)
+#define MREPEAT80( macro, data) MREPEAT79( macro, data) macro( 79, data)
+#define MREPEAT81( macro, data) MREPEAT80( macro, data) macro( 80, data)
+#define MREPEAT82( macro, data) MREPEAT81( macro, data) macro( 81, data)
+#define MREPEAT83( macro, data) MREPEAT82( macro, data) macro( 82, data)
+#define MREPEAT84( macro, data) MREPEAT83( macro, data) macro( 83, data)
+#define MREPEAT85( macro, data) MREPEAT84( macro, data) macro( 84, data)
+#define MREPEAT86( macro, data) MREPEAT85( macro, data) macro( 85, data)
+#define MREPEAT87( macro, data) MREPEAT86( macro, data) macro( 86, data)
+#define MREPEAT88( macro, data) MREPEAT87( macro, data) macro( 87, data)
+#define MREPEAT89( macro, data) MREPEAT88( macro, data) macro( 88, data)
+#define MREPEAT90( macro, data) MREPEAT89( macro, data) macro( 89, data)
+#define MREPEAT91( macro, data) MREPEAT90( macro, data) macro( 90, data)
+#define MREPEAT92( macro, data) MREPEAT91( macro, data) macro( 91, data)
+#define MREPEAT93( macro, data) MREPEAT92( macro, data) macro( 92, data)
+#define MREPEAT94( macro, data) MREPEAT93( macro, data) macro( 93, data)
+#define MREPEAT95( macro, data) MREPEAT94( macro, data) macro( 94, data)
+#define MREPEAT96( macro, data) MREPEAT95( macro, data) macro( 95, data)
+#define MREPEAT97( macro, data) MREPEAT96( macro, data) macro( 96, data)
+#define MREPEAT98( macro, data) MREPEAT97( macro, data) macro( 97, data)
+#define MREPEAT99( macro, data) MREPEAT98( macro, data) macro( 98, data)
+#define MREPEAT100(macro, data) MREPEAT99( macro, data) macro( 99, data)
+#define MREPEAT101(macro, data) MREPEAT100(macro, data) macro(100, data)
+#define MREPEAT102(macro, data) MREPEAT101(macro, data) macro(101, data)
+#define MREPEAT103(macro, data) MREPEAT102(macro, data) macro(102, data)
+#define MREPEAT104(macro, data) MREPEAT103(macro, data) macro(103, data)
+#define MREPEAT105(macro, data) MREPEAT104(macro, data) macro(104, data)
+#define MREPEAT106(macro, data) MREPEAT105(macro, data) macro(105, data)
+#define MREPEAT107(macro, data) MREPEAT106(macro, data) macro(106, data)
+#define MREPEAT108(macro, data) MREPEAT107(macro, data) macro(107, data)
+#define MREPEAT109(macro, data) MREPEAT108(macro, data) macro(108, data)
+#define MREPEAT110(macro, data) MREPEAT109(macro, data) macro(109, data)
+#define MREPEAT111(macro, data) MREPEAT110(macro, data) macro(110, data)
+#define MREPEAT112(macro, data) MREPEAT111(macro, data) macro(111, data)
+#define MREPEAT113(macro, data) MREPEAT112(macro, data) macro(112, data)
+#define MREPEAT114(macro, data) MREPEAT113(macro, data) macro(113, data)
+#define MREPEAT115(macro, data) MREPEAT114(macro, data) macro(114, data)
+#define MREPEAT116(macro, data) MREPEAT115(macro, data) macro(115, data)
+#define MREPEAT117(macro, data) MREPEAT116(macro, data) macro(116, data)
+#define MREPEAT118(macro, data) MREPEAT117(macro, data) macro(117, data)
+#define MREPEAT119(macro, data) MREPEAT118(macro, data) macro(118, data)
+#define MREPEAT120(macro, data) MREPEAT119(macro, data) macro(119, data)
+#define MREPEAT121(macro, data) MREPEAT120(macro, data) macro(120, data)
+#define MREPEAT122(macro, data) MREPEAT121(macro, data) macro(121, data)
+#define MREPEAT123(macro, data) MREPEAT122(macro, data) macro(122, data)
+#define MREPEAT124(macro, data) MREPEAT123(macro, data) macro(123, data)
+#define MREPEAT125(macro, data) MREPEAT124(macro, data) macro(124, data)
+#define MREPEAT126(macro, data) MREPEAT125(macro, data) macro(125, data)
+#define MREPEAT127(macro, data) MREPEAT126(macro, data) macro(126, data)
+#define MREPEAT128(macro, data) MREPEAT127(macro, data) macro(127, data)
+#define MREPEAT129(macro, data) MREPEAT128(macro, data) macro(128, data)
+#define MREPEAT130(macro, data) MREPEAT129(macro, data) macro(129, data)
+#define MREPEAT131(macro, data) MREPEAT130(macro, data) macro(130, data)
+#define MREPEAT132(macro, data) MREPEAT131(macro, data) macro(131, data)
+#define MREPEAT133(macro, data) MREPEAT132(macro, data) macro(132, data)
+#define MREPEAT134(macro, data) MREPEAT133(macro, data) macro(133, data)
+#define MREPEAT135(macro, data) MREPEAT134(macro, data) macro(134, data)
+#define MREPEAT136(macro, data) MREPEAT135(macro, data) macro(135, data)
+#define MREPEAT137(macro, data) MREPEAT136(macro, data) macro(136, data)
+#define MREPEAT138(macro, data) MREPEAT137(macro, data) macro(137, data)
+#define MREPEAT139(macro, data) MREPEAT138(macro, data) macro(138, data)
+#define MREPEAT140(macro, data) MREPEAT139(macro, data) macro(139, data)
+#define MREPEAT141(macro, data) MREPEAT140(macro, data) macro(140, data)
+#define MREPEAT142(macro, data) MREPEAT141(macro, data) macro(141, data)
+#define MREPEAT143(macro, data) MREPEAT142(macro, data) macro(142, data)
+#define MREPEAT144(macro, data) MREPEAT143(macro, data) macro(143, data)
+#define MREPEAT145(macro, data) MREPEAT144(macro, data) macro(144, data)
+#define MREPEAT146(macro, data) MREPEAT145(macro, data) macro(145, data)
+#define MREPEAT147(macro, data) MREPEAT146(macro, data) macro(146, data)
+#define MREPEAT148(macro, data) MREPEAT147(macro, data) macro(147, data)
+#define MREPEAT149(macro, data) MREPEAT148(macro, data) macro(148, data)
+#define MREPEAT150(macro, data) MREPEAT149(macro, data) macro(149, data)
+#define MREPEAT151(macro, data) MREPEAT150(macro, data) macro(150, data)
+#define MREPEAT152(macro, data) MREPEAT151(macro, data) macro(151, data)
+#define MREPEAT153(macro, data) MREPEAT152(macro, data) macro(152, data)
+#define MREPEAT154(macro, data) MREPEAT153(macro, data) macro(153, data)
+#define MREPEAT155(macro, data) MREPEAT154(macro, data) macro(154, data)
+#define MREPEAT156(macro, data) MREPEAT155(macro, data) macro(155, data)
+#define MREPEAT157(macro, data) MREPEAT156(macro, data) macro(156, data)
+#define MREPEAT158(macro, data) MREPEAT157(macro, data) macro(157, data)
+#define MREPEAT159(macro, data) MREPEAT158(macro, data) macro(158, data)
+#define MREPEAT160(macro, data) MREPEAT159(macro, data) macro(159, data)
+#define MREPEAT161(macro, data) MREPEAT160(macro, data) macro(160, data)
+#define MREPEAT162(macro, data) MREPEAT161(macro, data) macro(161, data)
+#define MREPEAT163(macro, data) MREPEAT162(macro, data) macro(162, data)
+#define MREPEAT164(macro, data) MREPEAT163(macro, data) macro(163, data)
+#define MREPEAT165(macro, data) MREPEAT164(macro, data) macro(164, data)
+#define MREPEAT166(macro, data) MREPEAT165(macro, data) macro(165, data)
+#define MREPEAT167(macro, data) MREPEAT166(macro, data) macro(166, data)
+#define MREPEAT168(macro, data) MREPEAT167(macro, data) macro(167, data)
+#define MREPEAT169(macro, data) MREPEAT168(macro, data) macro(168, data)
+#define MREPEAT170(macro, data) MREPEAT169(macro, data) macro(169, data)
+#define MREPEAT171(macro, data) MREPEAT170(macro, data) macro(170, data)
+#define MREPEAT172(macro, data) MREPEAT171(macro, data) macro(171, data)
+#define MREPEAT173(macro, data) MREPEAT172(macro, data) macro(172, data)
+#define MREPEAT174(macro, data) MREPEAT173(macro, data) macro(173, data)
+#define MREPEAT175(macro, data) MREPEAT174(macro, data) macro(174, data)
+#define MREPEAT176(macro, data) MREPEAT175(macro, data) macro(175, data)
+#define MREPEAT177(macro, data) MREPEAT176(macro, data) macro(176, data)
+#define MREPEAT178(macro, data) MREPEAT177(macro, data) macro(177, data)
+#define MREPEAT179(macro, data) MREPEAT178(macro, data) macro(178, data)
+#define MREPEAT180(macro, data) MREPEAT179(macro, data) macro(179, data)
+#define MREPEAT181(macro, data) MREPEAT180(macro, data) macro(180, data)
+#define MREPEAT182(macro, data) MREPEAT181(macro, data) macro(181, data)
+#define MREPEAT183(macro, data) MREPEAT182(macro, data) macro(182, data)
+#define MREPEAT184(macro, data) MREPEAT183(macro, data) macro(183, data)
+#define MREPEAT185(macro, data) MREPEAT184(macro, data) macro(184, data)
+#define MREPEAT186(macro, data) MREPEAT185(macro, data) macro(185, data)
+#define MREPEAT187(macro, data) MREPEAT186(macro, data) macro(186, data)
+#define MREPEAT188(macro, data) MREPEAT187(macro, data) macro(187, data)
+#define MREPEAT189(macro, data) MREPEAT188(macro, data) macro(188, data)
+#define MREPEAT190(macro, data) MREPEAT189(macro, data) macro(189, data)
+#define MREPEAT191(macro, data) MREPEAT190(macro, data) macro(190, data)
+#define MREPEAT192(macro, data) MREPEAT191(macro, data) macro(191, data)
+#define MREPEAT193(macro, data) MREPEAT192(macro, data) macro(192, data)
+#define MREPEAT194(macro, data) MREPEAT193(macro, data) macro(193, data)
+#define MREPEAT195(macro, data) MREPEAT194(macro, data) macro(194, data)
+#define MREPEAT196(macro, data) MREPEAT195(macro, data) macro(195, data)
+#define MREPEAT197(macro, data) MREPEAT196(macro, data) macro(196, data)
+#define MREPEAT198(macro, data) MREPEAT197(macro, data) macro(197, data)
+#define MREPEAT199(macro, data) MREPEAT198(macro, data) macro(198, data)
+#define MREPEAT200(macro, data) MREPEAT199(macro, data) macro(199, data)
+#define MREPEAT201(macro, data) MREPEAT200(macro, data) macro(200, data)
+#define MREPEAT202(macro, data) MREPEAT201(macro, data) macro(201, data)
+#define MREPEAT203(macro, data) MREPEAT202(macro, data) macro(202, data)
+#define MREPEAT204(macro, data) MREPEAT203(macro, data) macro(203, data)
+#define MREPEAT205(macro, data) MREPEAT204(macro, data) macro(204, data)
+#define MREPEAT206(macro, data) MREPEAT205(macro, data) macro(205, data)
+#define MREPEAT207(macro, data) MREPEAT206(macro, data) macro(206, data)
+#define MREPEAT208(macro, data) MREPEAT207(macro, data) macro(207, data)
+#define MREPEAT209(macro, data) MREPEAT208(macro, data) macro(208, data)
+#define MREPEAT210(macro, data) MREPEAT209(macro, data) macro(209, data)
+#define MREPEAT211(macro, data) MREPEAT210(macro, data) macro(210, data)
+#define MREPEAT212(macro, data) MREPEAT211(macro, data) macro(211, data)
+#define MREPEAT213(macro, data) MREPEAT212(macro, data) macro(212, data)
+#define MREPEAT214(macro, data) MREPEAT213(macro, data) macro(213, data)
+#define MREPEAT215(macro, data) MREPEAT214(macro, data) macro(214, data)
+#define MREPEAT216(macro, data) MREPEAT215(macro, data) macro(215, data)
+#define MREPEAT217(macro, data) MREPEAT216(macro, data) macro(216, data)
+#define MREPEAT218(macro, data) MREPEAT217(macro, data) macro(217, data)
+#define MREPEAT219(macro, data) MREPEAT218(macro, data) macro(218, data)
+#define MREPEAT220(macro, data) MREPEAT219(macro, data) macro(219, data)
+#define MREPEAT221(macro, data) MREPEAT220(macro, data) macro(220, data)
+#define MREPEAT222(macro, data) MREPEAT221(macro, data) macro(221, data)
+#define MREPEAT223(macro, data) MREPEAT222(macro, data) macro(222, data)
+#define MREPEAT224(macro, data) MREPEAT223(macro, data) macro(223, data)
+#define MREPEAT225(macro, data) MREPEAT224(macro, data) macro(224, data)
+#define MREPEAT226(macro, data) MREPEAT225(macro, data) macro(225, data)
+#define MREPEAT227(macro, data) MREPEAT226(macro, data) macro(226, data)
+#define MREPEAT228(macro, data) MREPEAT227(macro, data) macro(227, data)
+#define MREPEAT229(macro, data) MREPEAT228(macro, data) macro(228, data)
+#define MREPEAT230(macro, data) MREPEAT229(macro, data) macro(229, data)
+#define MREPEAT231(macro, data) MREPEAT230(macro, data) macro(230, data)
+#define MREPEAT232(macro, data) MREPEAT231(macro, data) macro(231, data)
+#define MREPEAT233(macro, data) MREPEAT232(macro, data) macro(232, data)
+#define MREPEAT234(macro, data) MREPEAT233(macro, data) macro(233, data)
+#define MREPEAT235(macro, data) MREPEAT234(macro, data) macro(234, data)
+#define MREPEAT236(macro, data) MREPEAT235(macro, data) macro(235, data)
+#define MREPEAT237(macro, data) MREPEAT236(macro, data) macro(236, data)
+#define MREPEAT238(macro, data) MREPEAT237(macro, data) macro(237, data)
+#define MREPEAT239(macro, data) MREPEAT238(macro, data) macro(238, data)
+#define MREPEAT240(macro, data) MREPEAT239(macro, data) macro(239, data)
+#define MREPEAT241(macro, data) MREPEAT240(macro, data) macro(240, data)
+#define MREPEAT242(macro, data) MREPEAT241(macro, data) macro(241, data)
+#define MREPEAT243(macro, data) MREPEAT242(macro, data) macro(242, data)
+#define MREPEAT244(macro, data) MREPEAT243(macro, data) macro(243, data)
+#define MREPEAT245(macro, data) MREPEAT244(macro, data) macro(244, data)
+#define MREPEAT246(macro, data) MREPEAT245(macro, data) macro(245, data)
+#define MREPEAT247(macro, data) MREPEAT246(macro, data) macro(246, data)
+#define MREPEAT248(macro, data) MREPEAT247(macro, data) macro(247, data)
+#define MREPEAT249(macro, data) MREPEAT248(macro, data) macro(248, data)
+#define MREPEAT250(macro, data) MREPEAT249(macro, data) macro(249, data)
+#define MREPEAT251(macro, data) MREPEAT250(macro, data) macro(250, data)
+#define MREPEAT252(macro, data) MREPEAT251(macro, data) macro(251, data)
+#define MREPEAT253(macro, data) MREPEAT252(macro, data) macro(252, data)
+#define MREPEAT254(macro, data) MREPEAT253(macro, data) macro(253, data)
+#define MREPEAT255(macro, data) MREPEAT254(macro, data) macro(254, data)
+#define MREPEAT256(macro, data) MREPEAT255(macro, data) macro(255, data)
+
+/**
+ * \}
+ */
+
+#endif // _MREPEAT_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/osc.h b/Marlin/src/HAL/HAL_DUE/usb/osc.h
new file mode 100644
index 0000000000..e6df402597
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/osc.h
@@ -0,0 +1,261 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific oscillator management functions.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef CHIP_OSC_H_INCLUDED
+#define CHIP_OSC_H_INCLUDED
+
+#include "compiler.h"
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+/*
+ * Below BOARD_XXX macros are related to the specific board, and
+ * should be defined by the board code, otherwise default value are used.
+ */
+#if !defined(BOARD_FREQ_SLCK_XTAL)
+# warning The board slow clock xtal frequency has not been defined.
+# define BOARD_FREQ_SLCK_XTAL (32768UL)
+#endif
+
+#if !defined(BOARD_FREQ_SLCK_BYPASS)
+# warning The board slow clock bypass frequency has not been defined.
+# define BOARD_FREQ_SLCK_BYPASS (32768UL)
+#endif
+
+#if !defined(BOARD_FREQ_MAINCK_XTAL)
+# warning The board main clock xtal frequency has not been defined.
+# define BOARD_FREQ_MAINCK_XTAL (12000000UL)
+#endif
+
+#if !defined(BOARD_FREQ_MAINCK_BYPASS)
+# warning The board main clock bypass frequency has not been defined.
+# define BOARD_FREQ_MAINCK_BYPASS (12000000UL)
+#endif
+
+#if !defined(BOARD_OSC_STARTUP_US)
+# warning The board main clock xtal startup time has not been defined.
+# define BOARD_OSC_STARTUP_US (15625UL)
+#endif
+
+/**
+ * \weakgroup osc_group
+ * @{
+ */
+
+//! \name Oscillator identifiers
+//@{
+#define OSC_SLCK_32K_RC 0 //!< Internal 32kHz RC oscillator.
+#define OSC_SLCK_32K_XTAL 1 //!< External 32kHz crystal oscillator.
+#define OSC_SLCK_32K_BYPASS 2 //!< External 32kHz bypass oscillator.
+#define OSC_MAINCK_4M_RC 3 //!< Internal 4MHz RC oscillator.
+#define OSC_MAINCK_8M_RC 4 //!< Internal 8MHz RC oscillator.
+#define OSC_MAINCK_12M_RC 5 //!< Internal 12MHz RC oscillator.
+#define OSC_MAINCK_XTAL 6 //!< External crystal oscillator.
+#define OSC_MAINCK_BYPASS 7 //!< External bypass oscillator.
+//@}
+
+//! \name Oscillator clock speed in hertz
+//@{
+#define OSC_SLCK_32K_RC_HZ CHIP_FREQ_SLCK_RC //!< Internal 32kHz RC oscillator.
+#define OSC_SLCK_32K_XTAL_HZ BOARD_FREQ_SLCK_XTAL //!< External 32kHz crystal oscillator.
+#define OSC_SLCK_32K_BYPASS_HZ BOARD_FREQ_SLCK_BYPASS //!< External 32kHz bypass oscillator.
+#define OSC_MAINCK_4M_RC_HZ CHIP_FREQ_MAINCK_RC_4MHZ //!< Internal 4MHz RC oscillator.
+#define OSC_MAINCK_8M_RC_HZ CHIP_FREQ_MAINCK_RC_8MHZ //!< Internal 8MHz RC oscillator.
+#define OSC_MAINCK_12M_RC_HZ CHIP_FREQ_MAINCK_RC_12MHZ //!< Internal 12MHz RC oscillator.
+#define OSC_MAINCK_XTAL_HZ BOARD_FREQ_MAINCK_XTAL //!< External crystal oscillator.
+#define OSC_MAINCK_BYPASS_HZ BOARD_FREQ_MAINCK_BYPASS //!< External bypass oscillator.
+//@}
+
+static inline void osc_enable(uint32_t ul_id)
+{
+ switch (ul_id) {
+ case OSC_SLCK_32K_RC:
+ break;
+
+ case OSC_SLCK_32K_XTAL:
+ pmc_switch_sclk_to_32kxtal(PMC_OSC_XTAL);
+ break;
+
+ case OSC_SLCK_32K_BYPASS:
+ pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
+ break;
+
+
+ case OSC_MAINCK_4M_RC:
+ pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
+ break;
+
+ case OSC_MAINCK_8M_RC:
+ pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_8_MHz);
+ break;
+
+ case OSC_MAINCK_12M_RC:
+ pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
+ break;
+
+
+ case OSC_MAINCK_XTAL:
+ pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
+ pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
+ OSC_SLCK_32K_RC_HZ)*/);
+ break;
+
+ case OSC_MAINCK_BYPASS:
+ pmc_switch_mainck_to_xtal(PMC_OSC_BYPASS/*,
+ pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
+ OSC_SLCK_32K_RC_HZ)*/);
+ break;
+ }
+}
+
+static inline void osc_disable(uint32_t ul_id)
+{
+ switch (ul_id) {
+ case OSC_SLCK_32K_RC:
+ case OSC_SLCK_32K_XTAL:
+ case OSC_SLCK_32K_BYPASS:
+ break;
+
+ case OSC_MAINCK_4M_RC:
+ case OSC_MAINCK_8M_RC:
+ case OSC_MAINCK_12M_RC:
+ pmc_osc_disable_fastrc();
+ break;
+
+ case OSC_MAINCK_XTAL:
+ pmc_osc_disable_xtal(PMC_OSC_XTAL);
+ break;
+
+ case OSC_MAINCK_BYPASS:
+ pmc_osc_disable_xtal(PMC_OSC_BYPASS);
+ break;
+ }
+}
+
+static inline bool osc_is_ready(uint32_t ul_id)
+{
+ switch (ul_id) {
+ case OSC_SLCK_32K_RC:
+ return 1;
+
+ case OSC_SLCK_32K_XTAL:
+ case OSC_SLCK_32K_BYPASS:
+ return pmc_osc_is_ready_32kxtal();
+
+ case OSC_MAINCK_4M_RC:
+ case OSC_MAINCK_8M_RC:
+ case OSC_MAINCK_12M_RC:
+ case OSC_MAINCK_XTAL:
+ case OSC_MAINCK_BYPASS:
+ return pmc_osc_is_ready_mainck();
+ }
+
+ return 0;
+}
+
+static inline uint32_t osc_get_rate(uint32_t ul_id)
+{
+ switch (ul_id) {
+ case OSC_SLCK_32K_RC:
+ return OSC_SLCK_32K_RC_HZ;
+
+ case OSC_SLCK_32K_XTAL:
+ return BOARD_FREQ_SLCK_XTAL;
+
+ case OSC_SLCK_32K_BYPASS:
+ return BOARD_FREQ_SLCK_BYPASS;
+
+ case OSC_MAINCK_4M_RC:
+ return OSC_MAINCK_4M_RC_HZ;
+
+ case OSC_MAINCK_8M_RC:
+ return OSC_MAINCK_8M_RC_HZ;
+
+ case OSC_MAINCK_12M_RC:
+ return OSC_MAINCK_12M_RC_HZ;
+
+ case OSC_MAINCK_XTAL:
+ return BOARD_FREQ_MAINCK_XTAL;
+
+ case OSC_MAINCK_BYPASS:
+ return BOARD_FREQ_MAINCK_BYPASS;
+ }
+
+ return 0;
+}
+
+/**
+ * \brief Wait until the oscillator identified by \a id is ready
+ *
+ * This function will busy-wait for the oscillator identified by \a id
+ * to become stable and ready to use as a clock source.
+ *
+ * \param id A number identifying the oscillator to wait for.
+ */
+static inline void osc_wait_ready(uint8_t id)
+{
+ while (!osc_is_ready(id)) {
+ /* Do nothing */
+ }
+}
+
+//! @}
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+}
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+#endif /* CHIP_OSC_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/pll.h b/Marlin/src/HAL/HAL_DUE/usb/pll.h
new file mode 100644
index 0000000000..d9b946be26
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/pll.h
@@ -0,0 +1,288 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific PLL definitions.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef CHIP_PLL_H_INCLUDED
+#define CHIP_PLL_H_INCLUDED
+
+#include "osc.h"
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+/**
+ * \weakgroup pll_group
+ * @{
+ */
+
+#define PLL_OUTPUT_MIN_HZ 84000000
+#define PLL_OUTPUT_MAX_HZ 192000000
+
+#define PLL_INPUT_MIN_HZ 8000000
+#define PLL_INPUT_MAX_HZ 16000000
+
+#define NR_PLLS 2
+#define PLLA_ID 0
+#define UPLL_ID 1 //!< USB UTMI PLL.
+
+#define PLL_UPLL_HZ 480000000
+
+#define PLL_COUNT 0x3fU
+
+enum pll_source {
+ PLL_SRC_MAINCK_4M_RC = OSC_MAINCK_4M_RC, //!< Internal 4MHz RC oscillator.
+ PLL_SRC_MAINCK_8M_RC = OSC_MAINCK_8M_RC, //!< Internal 8MHz RC oscillator.
+ PLL_SRC_MAINCK_12M_RC = OSC_MAINCK_12M_RC, //!< Internal 12MHz RC oscillator.
+ PLL_SRC_MAINCK_XTAL = OSC_MAINCK_XTAL, //!< External crystal oscillator.
+ PLL_SRC_MAINCK_BYPASS = OSC_MAINCK_BYPASS, //!< External bypass oscillator.
+ PLL_NR_SOURCES, //!< Number of PLL sources.
+};
+
+struct pll_config {
+ uint32_t ctrl;
+};
+
+#define pll_get_default_rate(pll_id) \
+ ((osc_get_rate(CONFIG_PLL##pll_id##_SOURCE) \
+ * CONFIG_PLL##pll_id##_MUL) \
+ / CONFIG_PLL##pll_id##_DIV)
+
+/* Force UTMI PLL parameters (Hardware defined) */
+#ifdef CONFIG_PLL1_SOURCE
+# undef CONFIG_PLL1_SOURCE
+#endif
+#ifdef CONFIG_PLL1_MUL
+# undef CONFIG_PLL1_MUL
+#endif
+#ifdef CONFIG_PLL1_DIV
+# undef CONFIG_PLL1_DIV
+#endif
+#define CONFIG_PLL1_SOURCE PLL_SRC_MAINCK_XTAL
+#define CONFIG_PLL1_MUL 0
+#define CONFIG_PLL1_DIV 0
+
+/**
+ * \note The SAM3X PLL hardware interprets mul as mul+1. For readability the hardware mul+1
+ * is hidden in this implementation. Use mul as mul effective value.
+ */
+static inline void pll_config_init(struct pll_config *p_cfg,
+ enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul)
+{
+ uint32_t vco_hz;
+
+ Assert(e_src < PLL_NR_SOURCES);
+
+ if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */
+ p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT);
+ } else { /* PLLA */
+ /* Calculate internal VCO frequency */
+ vco_hz = osc_get_rate(e_src) / ul_div;
+ Assert(vco_hz >= PLL_INPUT_MIN_HZ);
+ Assert(vco_hz <= PLL_INPUT_MAX_HZ);
+
+ vco_hz *= ul_mul;
+ Assert(vco_hz >= PLL_OUTPUT_MIN_HZ);
+ Assert(vco_hz <= PLL_OUTPUT_MAX_HZ);
+
+ /* PMC hardware will automatically make it mul+1 */
+ p_cfg->ctrl = CKGR_PLLAR_MULA(ul_mul - 1) | CKGR_PLLAR_DIVA(ul_div) | CKGR_PLLAR_PLLACOUNT(PLL_COUNT);
+ }
+}
+
+#define pll_config_defaults(cfg, pll_id) \
+ pll_config_init(cfg, \
+ CONFIG_PLL##pll_id##_SOURCE, \
+ CONFIG_PLL##pll_id##_DIV, \
+ CONFIG_PLL##pll_id##_MUL)
+
+static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id)
+{
+ Assert(ul_pll_id < NR_PLLS);
+
+ if (ul_pll_id == PLLA_ID) {
+ p_cfg->ctrl = PMC->CKGR_PLLAR;
+ } else {
+ p_cfg->ctrl = PMC->CKGR_UCKR;
+ }
+}
+
+static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id)
+{
+ Assert(ul_pll_id < NR_PLLS);
+
+ if (ul_pll_id == PLLA_ID) {
+ pmc_disable_pllack(); // Always stop PLL first!
+ PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
+ } else {
+ PMC->CKGR_UCKR = p_cfg->ctrl;
+ }
+}
+
+static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id)
+{
+ Assert(ul_pll_id < NR_PLLS);
+
+ if (ul_pll_id == PLLA_ID) {
+ pmc_disable_pllack(); // Always stop PLL first!
+ PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
+ } else {
+ PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN;
+ }
+}
+
+/**
+ * \note This will only disable the selected PLL, not the underlying oscillator (mainck).
+ */
+static inline void pll_disable(uint32_t ul_pll_id)
+{
+ Assert(ul_pll_id < NR_PLLS);
+
+ if (ul_pll_id == PLLA_ID) {
+ pmc_disable_pllack();
+ } else {
+ PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN;
+ }
+}
+
+static inline uint32_t pll_is_locked(uint32_t ul_pll_id)
+{
+ Assert(ul_pll_id < NR_PLLS);
+
+ if (ul_pll_id == PLLA_ID) {
+ return pmc_is_locked_pllack();
+ } else {
+ return pmc_is_locked_upll();
+ }
+}
+
+static inline void pll_enable_source(enum pll_source e_src)
+{
+ switch (e_src) {
+ case PLL_SRC_MAINCK_4M_RC:
+ case PLL_SRC_MAINCK_8M_RC:
+ case PLL_SRC_MAINCK_12M_RC:
+ case PLL_SRC_MAINCK_XTAL:
+ case PLL_SRC_MAINCK_BYPASS:
+ osc_enable(e_src);
+ osc_wait_ready(e_src);
+ break;
+
+ default:
+ Assert(false);
+ break;
+ }
+}
+
+static inline void pll_enable_config_defaults(unsigned int ul_pll_id)
+{
+ struct pll_config pllcfg;
+
+ if (pll_is_locked(ul_pll_id)) {
+ return; // Pll already running
+ }
+ switch (ul_pll_id) {
+#ifdef CONFIG_PLL0_SOURCE
+ case 0:
+ pll_enable_source(CONFIG_PLL0_SOURCE);
+ pll_config_init(&pllcfg,
+ CONFIG_PLL0_SOURCE,
+ CONFIG_PLL0_DIV,
+ CONFIG_PLL0_MUL);
+ break;
+#endif
+#ifdef CONFIG_PLL1_SOURCE
+ case 1:
+ pll_enable_source(CONFIG_PLL1_SOURCE);
+ pll_config_init(&pllcfg,
+ CONFIG_PLL1_SOURCE,
+ CONFIG_PLL1_DIV,
+ CONFIG_PLL1_MUL);
+ break;
+#endif
+ default:
+ Assert(false);
+ break;
+ }
+ pll_enable(&pllcfg, ul_pll_id);
+ while (!pll_is_locked(ul_pll_id));
+}
+
+/**
+ * \brief Wait for PLL \a pll_id to become locked
+ *
+ * \todo Use a timeout to avoid waiting forever and hanging the system
+ *
+ * \param pll_id The ID of the PLL to wait for.
+ *
+ * \retval STATUS_OK The PLL is now locked.
+ * \retval ERR_TIMEOUT Timed out waiting for PLL to become locked.
+ */
+static inline int pll_wait_for_lock(unsigned int pll_id)
+{
+ Assert(pll_id < NR_PLLS);
+
+ while (!pll_is_locked(pll_id)) {
+ /* Do nothing */
+ }
+
+ return 0;
+}
+
+//! @}
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+}
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+#endif /* CHIP_PLL_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/preprocessor.h b/Marlin/src/HAL/HAL_DUE/usb/preprocessor.h
new file mode 100644
index 0000000000..184c03ae71
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/preprocessor.h
@@ -0,0 +1,55 @@
+/**
+ * \file
+ *
+ * \brief Preprocessor utils.
+ *
+ * Copyright (c) 2010-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _PREPROCESSOR_H_
+#define _PREPROCESSOR_H_
+
+#include "tpaste.h"
+#include "stringz.h"
+#include "mrepeat.h"
+
+
+#endif // _PREPROCESSOR_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h b/Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h
new file mode 100644
index 0000000000..082b735fa6
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/sbc_protocol.h
@@ -0,0 +1,173 @@
+/**
+ * \file
+ *
+ * \brief SCSI Block Commands
+ *
+ * This file contains definitions of some of the commands found in the
+ * SCSI SBC-2 standard.
+ *
+ * Note that the SBC specification depends on several commands defined
+ * by the SCSI Primary Commands (SPC) standard. Each version of the SBC
+ * standard is meant to be used in conjunction with a specific version
+ * of the SPC standard, as follows:
+ * - SBC depends on SPC
+ * - SBC-2 depends on SPC-3
+ * - SBC-3 depends on SPC-4
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+#ifndef _SBC_PROTOCOL_H_
+#define _SBC_PROTOCOL_H_
+
+
+/**
+ * \ingroup usb_msc_protocol
+ * \defgroup usb_sbc_protocol SCSI Block Commands protocol definitions
+ *
+ * @{
+ */
+
+//! \name SCSI commands defined by SBC-2
+//@{
+#define SBC_FORMAT_UNIT 0x04
+#define SBC_READ6 0x08
+#define SBC_WRITE6 0x0A
+#define SBC_START_STOP_UNIT 0x1B
+#define SBC_READ_CAPACITY10 0x25
+#define SBC_READ10 0x28
+#define SBC_WRITE10 0x2A
+#define SBC_VERIFY10 0x2F
+//@}
+
+//! \name SBC-2 Mode page definitions
+//@{
+
+enum scsi_sbc_mode {
+ SCSI_MS_MODE_RW_ERR_RECOV = 0x01, //!< Read-Write Error Recovery mode page
+ SCSI_MS_MODE_FORMAT_DEVICE = 0x03, //!< Format Device mode page
+ SCSI_MS_MODE_FLEXIBLE_DISK = 0x05, //!< Flexible Disk mode page
+ SCSI_MS_MODE_CACHING = 0x08, //!< Caching mode page
+};
+
+
+//! \name SBC-2 Device-Specific Parameter
+//@{
+#define SCSI_MS_SBC_WP 0x80 //!< Write Protected
+#define SCSI_MS_SBC_DPOFUA 0x10 //!< DPO and FUA supported
+//@}
+
+/**
+ * \brief SBC-2 Short LBA mode parameter block descriptor
+ */
+struct sbc_slba_block_desc {
+ be32_t nr_blocks; //!< Number of Blocks
+ be32_t block_len; //!< Block Length
+#define SBC_SLBA_BLOCK_LEN_MASK 0x00FFFFFFU //!< Mask reserved bits
+};
+
+/**
+ * \brief SBC-2 Caching mode page
+ */
+struct sbc_caching_mode_page {
+ uint8_t page_code;
+ uint8_t page_length;
+ uint8_t flags2;
+#define SBC_MP_CACHE_IC (1 << 7) //!< Initiator Control
+#define SBC_MP_CACHE_ABPF (1 << 6) //!< Abort Pre-Fetch
+#define SBC_MP_CACHE_CAP (1 << 5) //!< Catching Analysis Permitted
+#define SBC_MP_CACHE_DISC (1 << 4) //!< Discontinuity
+#define SBC_MP_CACHE_SIZE (1 << 3) //!< Size enable
+#define SBC_MP_CACHE_WCE (1 << 2) //!< Write back Cache Enable
+#define SBC_MP_CACHE_MF (1 << 1) //!< Multiplication Factor
+#define SBC_MP_CACHE_RCD (1 << 0) //!< Read Cache Disable
+ uint8_t retention;
+ be16_t dis_pf_transfer_len;
+ be16_t min_prefetch;
+ be16_t max_prefetch;
+ be16_t max_prefetch_ceil;
+ uint8_t flags12;
+#define SBC_MP_CACHE_FSW (1 << 7) //!< Force Sequential Write
+#define SBC_MP_CACHE_LBCSS (1 << 6) //!< Logical Blk Cache Seg Sz
+#define SBC_MP_CACHE_DRA (1 << 5) //!< Disable Read-Ahead
+#define SBC_MP_CACHE_NV_DIS (1 << 0) //!< Non-Volatile Cache Disable
+ uint8_t nr_cache_segments;
+ be16_t cache_segment_size;
+ uint8_t reserved[4];
+};
+
+/**
+ * \brief SBC-2 Read-Write Error Recovery mode page
+ */
+struct sbc_rdwr_error_recovery_mode_page {
+ uint8_t page_code;
+ uint8_t page_length;
+#define SPC_MP_RW_ERR_RECOV_PAGE_LENGTH 0x0A
+ uint8_t flags1;
+#define SBC_MP_RW_ERR_RECOV_AWRE (1 << 7)
+#define SBC_MP_RW_ERR_RECOV_ARRE (1 << 6)
+#define SBC_MP_RW_ERR_RECOV_TB (1 << 5)
+#define SBC_MP_RW_ERR_RECOV_RC (1 << 4)
+#define SBC_MP_RW_ERR_RECOV_ERR (1 << 3)
+#define SBC_MP_RW_ERR_RECOV_PER (1 << 2)
+#define SBC_MP_RW_ERR_RECOV_DTE (1 << 1)
+#define SBC_MP_RW_ERR_RECOV_DCR (1 << 0)
+ uint8_t read_retry_count;
+ uint8_t correction_span;
+ uint8_t head_offset_count;
+ uint8_t data_strobe_offset_count;
+ uint8_t flags2;
+ uint8_t write_retry_count;
+ uint8_t flags3;
+ be16_t recovery_time_limit;
+};
+//@}
+
+/**
+ * \brief SBC-2 READ CAPACITY (10) parameter data
+ */
+struct sbc_read_capacity10_data {
+ be32_t max_lba; //!< LBA of last logical block
+ be32_t block_len; //!< Number of bytes in the last logical block
+};
+
+//@}
+
+#endif // _SBC_PROTOCOL_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp
new file mode 100644
index 0000000000..b54e74e05d
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp
@@ -0,0 +1,135 @@
+/**
+ * Interface from Atmel USB MSD to Marlin SD card
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../../inc/MarlinConfig.h"
+#include "../../../sd/cardreader.h"
+extern "C" {
+#include "sd_mmc_spi_mem.h"
+}
+
+#define SD_MMC_BLOCK_SIZE 512
+
+void sd_mmc_spi_mem_init(void)
+{
+}
+
+Ctrl_status sd_mmc_spi_test_unit_ready(void)
+{
+ if (!IS_SD_INSERTED || IS_SD_PRINTING || IS_SD_FILE_OPEN || !card.cardOK)
+ return CTRL_NO_PRESENT;
+ return CTRL_GOOD;
+}
+
+Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector)
+{
+ if (!IS_SD_INSERTED || IS_SD_PRINTING || IS_SD_FILE_OPEN || !card.cardOK)
+ return CTRL_NO_PRESENT;
+ *nb_sector = card.getSd2Card().cardSize();
+ return CTRL_GOOD;
+}
+
+bool sd_mmc_spi_unload(bool unload)
+{
+ return true;
+}
+
+bool sd_mmc_spi_wr_protect(void)
+{
+ return false;
+}
+
+bool sd_mmc_spi_removal(void)
+{
+ if (!IS_SD_INSERTED || IS_SD_PRINTING || IS_SD_FILE_OPEN || !card.cardOK)
+ return true;
+ return false;
+}
+
+#if ACCESS_USB == true
+/**
+ * \name MEM <-> USB Interface
+ * @{
+ */
+
+#include "udi_msc.h"
+
+COMPILER_WORD_ALIGNED
+uint8_t sector_buf[SD_MMC_BLOCK_SIZE];
+
+// #define DEBUG_MMC
+
+Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector)
+{
+ if (!IS_SD_INSERTED || IS_SD_PRINTING || IS_SD_FILE_OPEN || !card.cardOK)
+ return CTRL_NO_PRESENT;
+
+#ifdef DEBUG_MMC
+ char buffer[80];
+ sprintf(buffer, "SDRD: %d @ 0x%08x\n", nb_sector, addr);
+ MYSERIAL.print(buffer);
+#endif
+
+ // Start reading
+ if (!card.getSd2Card().readStart(addr))
+ return CTRL_FAIL;
+
+ // For each specified sector
+ while (nb_sector--) {
+
+ // Read a sector
+ card.getSd2Card().readData(sector_buf);
+
+ // RAM -> USB
+ if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
+ card.getSd2Card().readStop();
+ return CTRL_FAIL;
+ }
+ }
+
+ // Stop reading
+ card.getSd2Card().readStop();
+
+ // Done
+ return CTRL_GOOD;
+}
+
+Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector)
+{
+ if (!IS_SD_INSERTED || IS_SD_PRINTING || IS_SD_FILE_OPEN || !card.cardOK)
+ return CTRL_NO_PRESENT;
+
+#ifdef DEBUG_MMC
+ char buffer[80];
+ sprintf(buffer, "SDWR: %d @ 0x%08x\n", nb_sector, addr);
+ MYSERIAL.print(buffer);
+#endif
+
+ if (!card.getSd2Card().writeStart(addr, nb_sector))
+ return CTRL_FAIL;
+
+ // For each specified sector
+ while (nb_sector--) {
+
+ // USB -> RAM
+ if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
+ card.getSd2Card().writeStop();
+ return CTRL_FAIL;
+ }
+
+ // Write a sector
+ card.getSd2Card().writeData(sector_buf);
+ }
+
+ // Stop writing
+ card.getSd2Card().writeStop();
+
+ // Done
+ return CTRL_GOOD;
+}
+
+#endif // ACCESS_USB == true
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
new file mode 100644
index 0000000000..ea177c9920
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.h
@@ -0,0 +1,177 @@
+/*****************************************************************************
+ *
+ * \file
+ *
+ * \brief CTRL_ACCESS interface for SD/MMC card.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ ******************************************************************************/
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+
+#ifndef _SD_MMC_SPI_MEM_H_
+#define _SD_MMC_SPI_MEM_H_
+
+/**
+ * \defgroup group_avr32_components_memory_sd_mmc_sd_mmc_spi_mem SD/MMC SPI Memory
+ *
+ * \ingroup group_avr32_components_memory_sd_mmc_sd_mmc_spi
+ *
+ * \{
+ */
+
+#include "conf_access.h"
+
+#if SD_MMC_SPI_MEM == DISABLE
+ #error sd_mmc_spi_mem.h is #included although SD_MMC_SPI_MEM is disabled
+#endif
+
+
+#include "ctrl_access.h"
+
+
+//_____ D E F I N I T I O N S ______________________________________________
+
+#define SD_MMC_REMOVED 0
+#define SD_MMC_INSERTED 1
+#define SD_MMC_REMOVING 2
+
+
+//---- CONTROL FONCTIONS ----
+//!
+//! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
+//!/
+extern void sd_mmc_spi_mem_init(void);
+
+//!
+//! @brief This function tests the state of the SD_MMC memory and sends it to the Host.
+//! For a PC, this device is seen as a removable media
+//! Before indicating any modification of the status of the media (GOOD->NO_PRESENT or vice-versa),
+//! the function must return the BUSY data to make the PC accepting the change
+//!
+//! @return Ctrl_status
+//! Media is ready -> CTRL_GOOD
+//! Media not present -> CTRL_NO_PRESENT
+//! Media has changed -> CTRL_BUSY
+//!/
+extern Ctrl_status sd_mmc_spi_test_unit_ready(void);
+
+//!
+//! @brief This function gives the address of the last valid sector.
+//!
+//! @param *nb_sector number of sector (sector = 512B). OUT
+//!
+//! @return Ctrl_status
+//! Media ready -> CTRL_GOOD
+//! Media not present -> CTRL_NO_PRESENT
+//!/
+extern Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
+
+/*! \brief Unload/Load the SD/MMC card selected
+ *
+ * The START STOP UNIT SCSI optional command allows an application client to
+ * eject the removable medium on a LUN.
+ *
+ * \param unload \c true to unload the medium, \c false to load the medium.
+ *
+ * \return \c true if unload/load done success.
+ */
+extern bool sd_mmc_spi_unload(bool unload);
+
+//!
+//! @brief This function returns the write protected status of the memory.
+//!
+//! Only used by memory removal with a HARDWARE SPECIFIC write protected detection
+//! ! The user must unplug the memory to change this write protected status,
+//! which cannot be for a SD_MMC.
+//!
+//! @return false -> the memory is not write-protected (always)
+//!/
+extern bool sd_mmc_spi_wr_protect(void);
+
+//!
+//! @brief This function tells if the memory has been removed or not.
+//!
+//! @return false -> The memory isn't removed
+//!
+extern bool sd_mmc_spi_removal(void);
+
+
+//---- ACCESS DATA FONCTIONS ----
+
+#if ACCESS_USB == true
+// Standard functions for open in read/write mode the device
+
+//!
+//! @brief This function performs a read operation of n sectors from a given address on.
+//! (sector = 512B)
+//!
+//! DATA FLOW is: SD_MMC => USB
+//!
+//! @param addr Sector address to start the read from
+//! @param nb_sector Number of sectors to transfer
+//!
+//! @return Ctrl_status
+//! It is ready -> CTRL_GOOD
+//! A error occur -> CTRL_FAIL
+//!
+extern Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
+
+//! This function initializes the SD/MMC memory for a write operation
+//!
+//! DATA FLOW is: USB => SD_MMC
+//!
+//! (sector = 512B)
+//! @param addr Sector address to start write
+//! @param nb_sector Number of sectors to transfer
+//!
+//! @return Ctrl_status
+//! It is ready -> CTRL_GOOD
+//! An error occurs -> CTRL_FAIL
+//!
+extern Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
+
+#endif // #if ACCESS_USB == true
+
+/**
+ * \}
+ */
+
+#endif // _SD_MMC_SPI_MEM_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
new file mode 100644
index 0000000000..84c4dd50a9
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/spc_protocol.h
@@ -0,0 +1,337 @@
+/**
+ * \file
+ *
+ * \brief SCSI Primary Commands
+ *
+ * This file contains definitions of some of the commands found in the
+ * SPC-2 standard.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+#ifndef _SPC_PROTOCOL_H_
+#define _SPC_PROTOCOL_H_
+
+
+/**
+ * \ingroup usb_msc_protocol
+ * \defgroup usb_spc_protocol SCSI Primary Commands protocol definitions
+ *
+ * @{
+ */
+
+//! \name SCSI commands defined by SPC-2
+//@{
+#define SPC_TEST_UNIT_READY 0x00
+#define SPC_REQUEST_SENSE 0x03
+#define SPC_INQUIRY 0x12
+#define SPC_MODE_SELECT6 0x15
+#define SPC_MODE_SENSE6 0x1A
+#define SPC_SEND_DIAGNOSTIC 0x1D
+#define SPC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
+#define SPC_MODE_SENSE10 0x5A
+#define SPC_REPORT_LUNS 0xA0
+//@}
+
+//! \brief May be set in byte 0 of the INQUIRY CDB
+//@{
+//! Enable Vital Product Data
+#define SCSI_INQ_REQ_EVPD 0x01
+//! Command Support Data specified by the PAGE OR OPERATION CODE field
+#define SCSI_INQ_REQ_CMDT 0x02
+//@}
+
+COMPILER_PACK_SET(1)
+
+/**
+ * \brief SCSI Standard Inquiry data structure
+ */
+struct scsi_inquiry_data {
+ uint8_t pq_pdt; //!< Peripheral Qual / Peripheral Dev Type
+#define SCSI_INQ_PQ_CONNECTED 0x00 //!< Peripheral connected
+#define SCSI_INQ_PQ_NOT_CONN 0x20 //!< Peripheral not connected
+#define SCSI_INQ_PQ_NOT_SUPP 0x60 //!< Peripheral not supported
+#define SCSI_INQ_DT_DIR_ACCESS 0x00 //!< Direct Access (SBC)
+#define SCSI_INQ_DT_SEQ_ACCESS 0x01 //!< Sequential Access
+#define SCSI_INQ_DT_PRINTER 0x02 //!< Printer
+#define SCSI_INQ_DT_PROCESSOR 0x03 //!< Processor device
+#define SCSI_INQ_DT_WRITE_ONCE 0x04 //!< Write-once device
+#define SCSI_INQ_DT_CD_DVD 0x05 //!< CD/DVD device
+#define SCSI_INQ_DT_OPTICAL 0x07 //!< Optical Memory
+#define SCSI_INQ_DT_MC 0x08 //!< Medium Changer
+#define SCSI_INQ_DT_ARRAY 0x0c //!< Storage Array Controller
+#define SCSI_INQ_DT_ENCLOSURE 0x0d //!< Enclosure Services
+#define SCSI_INQ_DT_RBC 0x0e //!< Simplified Direct Access
+#define SCSI_INQ_DT_OCRW 0x0f //!< Optical card reader/writer
+#define SCSI_INQ_DT_BCC 0x10 //!< Bridge Controller Commands
+#define SCSI_INQ_DT_OSD 0x11 //!< Object-based Storage
+#define SCSI_INQ_DT_NONE 0x1f //!< No Peripheral
+ uint8_t flags1; //!< Flags (byte 1)
+#define SCSI_INQ_RMB 0x80 //!< Removable Medium
+ uint8_t version; //!< Version
+#define SCSI_INQ_VER_NONE 0x00 //!< No standards conformance
+#define SCSI_INQ_VER_SPC 0x03 //!< SCSI Primary Commands (link to SBC)
+#define SCSI_INQ_VER_SPC2 0x04 //!< SCSI Primary Commands - 2 (link to SBC-2)
+#define SCSI_INQ_VER_SPC3 0x05 //!< SCSI Primary Commands - 3 (link to SBC-2)
+#define SCSI_INQ_VER_SPC4 0x06 //!< SCSI Primary Commands - 4 (link to SBC-3)
+ uint8_t flags3; //!< Flags (byte 3)
+#define SCSI_INQ_NORMACA 0x20 //!< Normal ACA Supported
+#define SCSI_INQ_HISUP 0x10 //!< Hierarchal LUN addressing
+#define SCSI_INQ_RSP_SPC2 0x02 //!< SPC-2 / SPC-3 response format
+ uint8_t addl_len; //!< Additional Length (n-4)
+#define SCSI_INQ_ADDL_LEN(tot) ((tot)-5) //!< Total length is \a tot
+ uint8_t flags5; //!< Flags (byte 5)
+#define SCSI_INQ_SCCS 0x80
+ uint8_t flags6; //!< Flags (byte 6)
+#define SCSI_INQ_BQUE 0x80
+#define SCSI_INQ_ENCSERV 0x40
+#define SCSI_INQ_MULTIP 0x10
+#define SCSI_INQ_MCHGR 0x08
+#define SCSI_INQ_ADDR16 0x01
+ uint8_t flags7; //!< Flags (byte 7)
+#define SCSI_INQ_WBUS16 0x20
+#define SCSI_INQ_SYNC 0x10
+#define SCSI_INQ_LINKED 0x08
+#define SCSI_INQ_CMDQUE 0x02
+ uint8_t vendor_id[8]; //!< T10 Vendor Identification
+ uint8_t product_id[16]; //!< Product Identification
+ uint8_t product_rev[4]; //!< Product Revision Level
+};
+
+/**
+ * \brief SCSI Standard Request sense data structure
+ */
+struct scsi_request_sense_data {
+ /* 1st byte: REQUEST SENSE response flags*/
+ uint8_t valid_reponse_code;
+#define SCSI_SENSE_VALID 0x80 //!< Indicates the INFORMATION field contains valid information
+#define SCSI_SENSE_RESPONSE_CODE_MASK 0x7F
+#define SCSI_SENSE_CURRENT 0x70 //!< Response code 70h (current errors)
+#define SCSI_SENSE_DEFERRED 0x71
+
+ /* 2nd byte */
+ uint8_t obsolete;
+
+ /* 3rd byte */
+ uint8_t sense_flag_key;
+#define SCSI_SENSE_FILEMARK 0x80 //!< Indicates that the current command has read a filemark or setmark.
+#define SCSI_SENSE_EOM 0x40 //!< Indicates that an end-of-medium condition exists.
+#define SCSI_SENSE_ILI 0x20 //!< Indicates that the requested logical block length did not match the logical block length of the data on the medium.
+#define SCSI_SENSE_RESERVED 0x10 //!< Reserved
+#define SCSI_SENSE_KEY(x) (x&0x0F) //!< Sense Key
+
+ /* 4th to 7th bytes - INFORMATION field */
+ uint8_t information[4];
+
+ /* 8th byte - ADDITIONAL SENSE LENGTH field */
+ uint8_t AddSenseLen;
+#define SCSI_SENSE_ADDL_LEN(total_len) ((total_len) - 8)
+
+ /* 9th to 12th byte - COMMAND-SPECIFIC INFORMATION field */
+ uint8_t CmdSpecINFO[4];
+
+ /* 13th byte - ADDITIONAL SENSE CODE field */
+ uint8_t AddSenseCode;
+
+ /* 14th byte - ADDITIONAL SENSE CODE QUALIFIER field */
+ uint8_t AddSnsCodeQlfr;
+
+ /* 15th byte - FIELD REPLACEABLE UNIT CODE field */
+ uint8_t FldReplUnitCode;
+
+ /* 16th byte */
+ uint8_t SenseKeySpec[3];
+#define SCSI_SENSE_SKSV 0x80 //!< Indicates the SENSE-KEY SPECIFIC field contains valid information
+};
+
+COMPILER_PACK_RESET()
+
+/* Vital Product Data page codes */
+enum scsi_vpd_page_code {
+ SCSI_VPD_SUPPORTED_PAGES = 0x00,
+ SCSI_VPD_UNIT_SERIAL_NUMBER = 0x80,
+ SCSI_VPD_DEVICE_IDENTIFICATION = 0x83,
+};
+#define SCSI_VPD_HEADER_SIZE 4
+
+/* Constants associated with the Device Identification VPD page */
+#define SCSI_VPD_ID_HEADER_SIZE 4
+
+#define SCSI_VPD_CODE_SET_BINARY 1
+#define SCSI_VPD_CODE_SET_ASCII 2
+#define SCSI_VPD_CODE_SET_UTF8 3
+
+#define SCSI_VPD_ID_TYPE_T10 1
+
+
+/* Sense keys */
+enum scsi_sense_key {
+ SCSI_SK_NO_SENSE = 0x0,
+ SCSI_SK_RECOVERED_ERROR = 0x1,
+ SCSI_SK_NOT_READY = 0x2,
+ SCSI_SK_MEDIUM_ERROR = 0x3,
+ SCSI_SK_HARDWARE_ERROR = 0x4,
+ SCSI_SK_ILLEGAL_REQUEST = 0x5,
+ SCSI_SK_UNIT_ATTENTION = 0x6,
+ SCSI_SK_DATA_PROTECT = 0x7,
+ SCSI_SK_BLANK_CHECK = 0x8,
+ SCSI_SK_VENDOR_SPECIFIC = 0x9,
+ SCSI_SK_COPY_ABORTED = 0xa,
+ SCSI_SK_ABORTED_COMMAND = 0xb,
+ SCSI_SK_VOLUME_OVERFLOW = 0xd,
+ SCSI_SK_MISCOMPARE = 0xe,
+};
+
+/* Additional Sense Code / Additional Sense Code Qualifier pairs */
+enum scsi_asc_ascq {
+ SCSI_ASC_NO_ADDITIONAL_SENSE_INFO = 0x0000,
+ SCSI_ASC_LU_NOT_READY_REBUILD_IN_PROGRESS = 0x0405,
+ SCSI_ASC_WRITE_ERROR = 0x0c00,
+ SCSI_ASC_UNRECOVERED_READ_ERROR = 0x1100,
+ SCSI_ASC_INVALID_COMMAND_OPERATION_CODE = 0x2000,
+ SCSI_ASC_INVALID_FIELD_IN_CDB = 0x2400,
+ SCSI_ASC_WRITE_PROTECTED = 0x2700,
+ SCSI_ASC_NOT_READY_TO_READY_CHANGE = 0x2800,
+ SCSI_ASC_MEDIUM_NOT_PRESENT = 0x3A00,
+ SCSI_ASC_INTERNAL_TARGET_FAILURE = 0x4400,
+};
+
+/**
+ * \brief SPC-2 Mode parameter
+ * This subclause describes the block descriptors and the pages
+ * used with MODE SELECT and MODE SENSE commands
+ * that are applicable to all SCSI devices.
+ */
+enum scsi_spc_mode {
+ SCSI_MS_MODE_VENDOR_SPEC = 0x00,
+ SCSI_MS_MODE_INFEXP = 0x1C, // Informational exceptions control page
+ SCSI_MS_MODE_ALL = 0x3f,
+};
+
+/**
+ * \brief SPC-2 Informational exceptions control page
+ * See chapter 8.3.8
+ */
+struct spc_control_page_info_execpt {
+ uint8_t page_code;
+ uint8_t page_length;
+#define SPC_MP_INFEXP_PAGE_LENGTH 0x0A
+ uint8_t flags1;
+#define SPC_MP_INFEXP_PERF (1<<7) //!< Initiator Control
+#define SPC_MP_INFEXP_EBF (1<<5) //!< Caching Analysis Permitted
+#define SPC_MP_INFEXP_EWASC (1<<4) //!< Discontinuity
+#define SPC_MP_INFEXP_DEXCPT (1<<3) //!< Size enable
+#define SPC_MP_INFEXP_TEST (1<<2) //!< Writeback Cache Enable
+#define SPC_MP_INFEXP_LOGERR (1<<0) //!< Log errors bit
+ uint8_t mrie;
+#define SPC_MP_INFEXP_MRIE_NO_REPORT 0x00
+#define SPC_MP_INFEXP_MRIE_ASYNC_EVENT 0x01
+#define SPC_MP_INFEXP_MRIE_GEN_UNIT 0x02
+#define SPC_MP_INFEXP_MRIE_COND_RECOV_ERROR 0x03
+#define SPC_MP_INFEXP_MRIE_UNCOND_RECOV_ERROR 0x04
+#define SPC_MP_INFEXP_MRIE_NO_SENSE 0x05
+#define SPC_MP_INFEXP_MRIE_ONLY_REPORT 0x06
+ be32_t interval_timer;
+ be32_t report_count;
+};
+
+
+enum scsi_spc_mode_sense_pc {
+ SCSI_MS_SENSE_PC_CURRENT = 0,
+ SCSI_MS_SENSE_PC_CHANGEABLE = 1,
+ SCSI_MS_SENSE_PC_DEFAULT = 2,
+ SCSI_MS_SENSE_PC_SAVED = 3,
+};
+
+
+
+static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb)
+{
+ return (cdb[1] >> 3) & 1;
+}
+
+static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb)
+{
+ return cdb[2] & 0x3f;
+}
+
+static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb)
+{
+ return cdb[2] >> 6;
+}
+
+/**
+ * \brief SCSI Mode Parameter Header used by MODE SELECT(6) and MODE
+ * SENSE(6)
+ */
+struct scsi_mode_param_header6 {
+ uint8_t mode_data_length; //!< Number of bytes after this
+ uint8_t medium_type; //!< Medium Type
+ uint8_t device_specific_parameter; //!< Defined by command set
+ uint8_t block_descriptor_length; //!< Length of block descriptors
+};
+
+/**
+ * \brief SCSI Mode Parameter Header used by MODE SELECT(10) and MODE
+ * SENSE(10)
+ */
+struct scsi_mode_param_header10 {
+ be16_t mode_data_length; //!< Number of bytes after this
+ uint8_t medium_type; //!< Medium Type
+ uint8_t device_specific_parameter; //!< Defined by command set
+ uint8_t flags4; //!< LONGLBA in bit 0
+ uint8_t reserved;
+ be16_t block_descriptor_length; //!< Length of block descriptors
+};
+
+/**
+ * \brief SCSI Page_0 Mode Page header (SPF not set)
+ */
+struct scsi_mode_page_0_header {
+ uint8_t page_code;
+#define SCSI_PAGE_CODE_PS (1 << 7) //!< Parameters Saveable
+#define SCSI_PAGE_CODE_SPF (1 << 6) //!< SubPage Format
+ uint8_t page_length; //!< Number of bytes after this
+#define SCSI_MS_PAGE_LEN(total) ((total) - 2)
+};
+
+//@}
+
+#endif // SPC_PROTOCOL_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/stringz.h b/Marlin/src/HAL/HAL_DUE/usb/stringz.h
new file mode 100644
index 0000000000..b914b73489
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/stringz.h
@@ -0,0 +1,85 @@
+/**
+ * \file
+ *
+ * \brief Preprocessor stringizing utils.
+ *
+ * Copyright (c) 2010-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _STRINGZ_H_
+#define _STRINGZ_H_
+
+/**
+ * \defgroup group_sam_utils_stringz Preprocessor - Stringize
+ *
+ * \ingroup group_sam_utils
+ *
+ * \{
+ */
+
+/*! \brief Stringize.
+ *
+ * Stringize a preprocessing token, this token being allowed to be \#defined.
+ *
+ * May be used only within macros with the token passed as an argument if the token is \#defined.
+ *
+ * For example, writing STRINGZ(PIN) within a macro \#defined by PIN_NAME(PIN)
+ * and invoked as PIN_NAME(PIN0) with PIN0 \#defined as A0 is equivalent to
+ * writing "A0".
+ */
+#define STRINGZ(x) #x
+
+/*! \brief Absolute stringize.
+ *
+ * Stringize a preprocessing token, this token being allowed to be \#defined.
+ *
+ * No restriction of use if the token is \#defined.
+ *
+ * For example, writing ASTRINGZ(PIN0) anywhere with PIN0 \#defined as A0 is
+ * equivalent to writing "A0".
+ */
+#define ASTRINGZ(x) STRINGZ(x)
+
+/**
+ * \}
+ */
+
+#endif // _STRINGZ_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sysclk.c b/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
new file mode 100644
index 0000000000..1190895012
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/sysclk.c
@@ -0,0 +1,122 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific system clock management functions.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "sysclk.h"
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+/**
+ * \weakgroup sysclk_group
+ * @{
+ */
+
+#if defined(CONFIG_USBCLK_SOURCE) || defined(__DOXYGEN__)
+/**
+ * \brief Enable full speed USB clock.
+ *
+ * \note The SAM3X PMC hardware interprets div as div+1. For readability the hardware div+1
+ * is hidden in this implementation. Use div as div effective value.
+ *
+ * \param pll_id Source of the USB clock.
+ * \param div Actual clock divisor. Must be superior to 0.
+ */
+void sysclk_enable_usb(void)
+{
+ Assert(CONFIG_USBCLK_DIV > 0);
+
+#ifdef CONFIG_PLL0_SOURCE
+ if (CONFIG_USBCLK_SOURCE == USBCLK_SRC_PLL0) {
+ struct pll_config pllcfg;
+
+ pll_enable_source(CONFIG_PLL0_SOURCE);
+ pll_config_defaults(&pllcfg, 0);
+ pll_enable(&pllcfg, 0);
+ pll_wait_for_lock(0);
+ pmc_switch_udpck_to_pllack(CONFIG_USBCLK_DIV - 1);
+ pmc_enable_udpck();
+ return;
+ }
+#endif
+
+ if (CONFIG_USBCLK_SOURCE == USBCLK_SRC_UPLL) {
+
+ pmc_enable_upll_clock();
+ pmc_switch_udpck_to_upllck(CONFIG_USBCLK_DIV - 1);
+ pmc_enable_udpck();
+ return;
+ }
+}
+
+/**
+ * \brief Disable full speed USB clock.
+ *
+ * \note This implementation does not switch off the PLL, it just turns off the USB clock.
+ */
+void sysclk_disable_usb(void)
+{
+ pmc_disable_udpck();
+}
+#endif // CONFIG_USBCLK_SOURCE
+
+//! @}
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+}
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/sysclk.h b/Marlin/src/HAL/HAL_DUE/usb/sysclk.h
new file mode 100644
index 0000000000..48c99de298
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/sysclk.h
@@ -0,0 +1,229 @@
+/**
+ * \file
+ *
+ * \brief Chip-specific system clock management functions.
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef CHIP_SYSCLK_H_INCLUDED
+#define CHIP_SYSCLK_H_INCLUDED
+
+#include "osc.h"
+#include "pll.h"
+
+/**
+ * \page sysclk_quickstart Quick Start Guide for the System Clock Management service (SAM3A)
+ *
+ * This is the quick start guide for the \ref sysclk_group "System Clock Management"
+ * service, with step-by-step instructions on how to configure and use the service for
+ * specific use cases.
+ *
+ * \section sysclk_quickstart_usecases System Clock Management use cases
+ * - \ref sysclk_quickstart_basic
+ *
+ * \section sysclk_quickstart_basic Basic usage of the System Clock Management service
+ * This section will present a basic use case for the System Clock Management service.
+ * This use case will configure the main system clock to 84MHz, using an internal PLL
+ * module to multiply the frequency of a crystal attached to the microcontroller.
+ *
+ * \subsection sysclk_quickstart_use_case_1_prereq Prerequisites
+ * - None
+ *
+ * \subsection sysclk_quickstart_use_case_1_setup_steps Initialization code
+ * Add to the application initialization code:
+ * \code
+ sysclk_init();
+\endcode
+ *
+ * \subsection sysclk_quickstart_use_case_1_setup_steps_workflow Workflow
+ * -# Configure the system clocks according to the settings in conf_clock.h:
+ * \code sysclk_init(); \endcode
+ *
+ * \subsection sysclk_quickstart_use_case_1_example_code Example code
+ * Add or uncomment the following in your conf_clock.h header file, commenting out all other
+ * definitions of the same symbol(s):
+ * \code
+ #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK
+
+ // Fpll0 = (Fclk * PLL_mul) / PLL_div
+ #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL
+ #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL)
+ #define CONFIG_PLL0_DIV 1
+
+ // Fbus = Fsys / BUS_div
+ #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
+\endcode
+ *
+ * \subsection sysclk_quickstart_use_case_1_example_workflow Workflow
+ * -# Configure the main system clock to use the output of the PLL module as its source:
+ * \code #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLLACK \endcode
+ * -# Configure the PLL module to use the fast external fast crystal oscillator as its source:
+ * \code #define CONFIG_PLL0_SOURCE PLL_SRC_MAINCK_XTAL \endcode
+ * -# Configure the PLL module to multiply the external fast crystal oscillator frequency up to 84MHz:
+ * \code
+ #define CONFIG_PLL0_MUL (84000000UL / BOARD_FREQ_MAINCK_XTAL)
+ #define CONFIG_PLL0_DIV 1
+\endcode
+ * \note For user boards, \c BOARD_FREQ_MAINCK_XTAL should be defined in the board \c conf_board.h configuration
+ * file as the frequency of the fast crystal attached to the microcontroller.
+ * -# Configure the main clock to run at the full 84MHz, disable scaling of the main system clock speed:
+ * \code
+ #define CONFIG_SYSCLK_PRES SYSCLK_PRES_1
+\endcode
+ * \note Some dividers are powers of two, while others are integer division factors. Refer to the
+ * formulas in the conf_clock.h template commented above each division define.
+ */
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+/**
+ * \weakgroup sysclk_group
+ * @{
+ */
+
+//! \name Configuration Symbols
+//@{
+/**
+ * \def CONFIG_SYSCLK_SOURCE
+ * \brief Initial/static main system clock source
+ *
+ * The main system clock will be configured to use this clock during
+ * initialization.
+ */
+#ifndef CONFIG_SYSCLK_SOURCE
+# define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_MAINCK_4M_RC
+#endif
+/**
+ * \def CONFIG_SYSCLK_PRES
+ * \brief Initial CPU clock divider (mck)
+ *
+ * The MCK will run at
+ * \f[
+ * f_{MCK} = \frac{f_{sys}}{\mathrm{CONFIG\_SYSCLK\_PRES}}\,\mbox{Hz}
+ * \f]
+ * after initialization.
+ */
+#ifndef CONFIG_SYSCLK_PRES
+# define CONFIG_SYSCLK_PRES 0
+#endif
+
+//@}
+
+//! \name Master Clock Sources (MCK)
+//@{
+#define SYSCLK_SRC_SLCK_RC 0 //!< Internal 32kHz RC oscillator as master source clock
+#define SYSCLK_SRC_SLCK_XTAL 1 //!< External 32kHz crystal oscillator as master source clock
+#define SYSCLK_SRC_SLCK_BYPASS 2 //!< External 32kHz bypass oscillator as master source clock
+#define SYSCLK_SRC_MAINCK_4M_RC 3 //!< Internal 4MHz RC oscillator as master source clock
+#define SYSCLK_SRC_MAINCK_8M_RC 4 //!< Internal 8MHz RC oscillator as master source clock
+#define SYSCLK_SRC_MAINCK_12M_RC 5 //!< Internal 12MHz RC oscillator as master source clock
+#define SYSCLK_SRC_MAINCK_XTAL 6 //!< External crystal oscillator as master source clock
+#define SYSCLK_SRC_MAINCK_BYPASS 7 //!< External bypass oscillator as master source clock
+#define SYSCLK_SRC_PLLACK 8 //!< Use PLLACK as master source clock
+#define SYSCLK_SRC_UPLLCK 9 //!< Use UPLLCK as master source clock
+//@}
+
+//! \name Master Clock Prescalers (MCK)
+//@{
+#define SYSCLK_PRES_1 PMC_MCKR_PRES_CLK_1 //!< Set master clock prescaler to 1
+#define SYSCLK_PRES_2 PMC_MCKR_PRES_CLK_2 //!< Set master clock prescaler to 2
+#define SYSCLK_PRES_4 PMC_MCKR_PRES_CLK_4 //!< Set master clock prescaler to 4
+#define SYSCLK_PRES_8 PMC_MCKR_PRES_CLK_8 //!< Set master clock prescaler to 8
+#define SYSCLK_PRES_16 PMC_MCKR_PRES_CLK_16 //!< Set master clock prescaler to 16
+#define SYSCLK_PRES_32 PMC_MCKR_PRES_CLK_32 //!< Set master clock prescaler to 32
+#define SYSCLK_PRES_64 PMC_MCKR_PRES_CLK_64 //!< Set master clock prescaler to 64
+#define SYSCLK_PRES_3 PMC_MCKR_PRES_CLK_3 //!< Set master clock prescaler to 3
+//@}
+
+//! \name USB Clock Sources
+//@{
+#define USBCLK_SRC_PLL0 0 //!< Use PLLA
+#define USBCLK_SRC_UPLL 1 //!< Use UPLL
+//@}
+
+/**
+ * \def CONFIG_USBCLK_SOURCE
+ * \brief Configuration symbol for the USB generic clock source
+ *
+ * Sets the clock source to use for the USB. The source must also be properly
+ * configured.
+ *
+ * Define this to one of the \c USBCLK_SRC_xxx settings. Leave it undefined if
+ * USB is not required.
+ */
+#ifdef __DOXYGEN__
+# define CONFIG_USBCLK_SOURCE
+#endif
+
+/**
+ * \def CONFIG_USBCLK_DIV
+ * \brief Configuration symbol for the USB generic clock divider setting
+ *
+ * Sets the clock division for the USB generic clock. If a USB clock source is
+ * selected with CONFIG_USBCLK_SOURCE, this configuration symbol must also be
+ * defined.
+ */
+#ifdef __DOXYGEN__
+# define CONFIG_USBCLK_DIV
+#endif
+
+
+extern void sysclk_enable_usb(void);
+extern void sysclk_disable_usb(void);
+
+//! @}
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+}
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+#endif /* CHIP_SYSCLK_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/tpaste.h b/Marlin/src/HAL/HAL_DUE/usb/tpaste.h
new file mode 100644
index 0000000000..f8ec44a41d
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/tpaste.h
@@ -0,0 +1,105 @@
+/**
+ * \file
+ *
+ * \brief Preprocessor token pasting utils.
+ *
+ * Copyright (c) 2010-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _TPASTE_H_
+#define _TPASTE_H_
+
+/**
+ * \defgroup group_sam_utils_tpaste Preprocessor - Token Paste
+ *
+ * \ingroup group_sam_utils
+ *
+ * \{
+ */
+
+/*! \name Token Paste
+ *
+ * Paste N preprocessing tokens together, these tokens being allowed to be \#defined.
+ *
+ * May be used only within macros with the tokens passed as arguments if the tokens are \#defined.
+ *
+ * For example, writing TPASTE2(U, WIDTH) within a macro \#defined by
+ * UTYPE(WIDTH) and invoked as UTYPE(UL_WIDTH) with UL_WIDTH \#defined as 32 is
+ * equivalent to writing U32.
+ */
+//! @{
+#define TPASTE2( a, b) a##b
+#define TPASTE3( a, b, c) a##b##c
+#define TPASTE4( a, b, c, d) a##b##c##d
+#define TPASTE5( a, b, c, d, e) a##b##c##d##e
+#define TPASTE6( a, b, c, d, e, f) a##b##c##d##e##f
+#define TPASTE7( a, b, c, d, e, f, g) a##b##c##d##e##f##g
+#define TPASTE8( a, b, c, d, e, f, g, h) a##b##c##d##e##f##g##h
+#define TPASTE9( a, b, c, d, e, f, g, h, i) a##b##c##d##e##f##g##h##i
+#define TPASTE10(a, b, c, d, e, f, g, h, i, j) a##b##c##d##e##f##g##h##i##j
+//! @}
+
+/*! \name Absolute Token Paste
+ *
+ * Paste N preprocessing tokens together, these tokens being allowed to be \#defined.
+ *
+ * No restriction of use if the tokens are \#defined.
+ *
+ * For example, writing ATPASTE2(U, UL_WIDTH) anywhere with UL_WIDTH \#defined
+ * as 32 is equivalent to writing U32.
+ */
+//! @{
+#define ATPASTE2( a, b) TPASTE2( a, b)
+#define ATPASTE3( a, b, c) TPASTE3( a, b, c)
+#define ATPASTE4( a, b, c, d) TPASTE4( a, b, c, d)
+#define ATPASTE5( a, b, c, d, e) TPASTE5( a, b, c, d, e)
+#define ATPASTE6( a, b, c, d, e, f) TPASTE6( a, b, c, d, e, f)
+#define ATPASTE7( a, b, c, d, e, f, g) TPASTE7( a, b, c, d, e, f, g)
+#define ATPASTE8( a, b, c, d, e, f, g, h) TPASTE8( a, b, c, d, e, f, g, h)
+#define ATPASTE9( a, b, c, d, e, f, g, h, i) TPASTE9( a, b, c, d, e, f, g, h, i)
+#define ATPASTE10(a, b, c, d, e, f, g, h, i, j) TPASTE10(a, b, c, d, e, f, g, h, i, j)
+//! @}
+
+/**
+ * \}
+ */
+
+#endif // _TPASTE_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udc.c b/Marlin/src/HAL/HAL_DUE/usb/udc.c
new file mode 100644
index 0000000000..9f3c14aa24
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udc.c
@@ -0,0 +1,1149 @@
+/**
+ * \file
+ *
+ * \brief USB Device Controller (UDC)
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "udd.h"
+#include "udc_desc.h"
+#include "udi.h"
+#include "udc.h"
+
+/**
+ * \ingroup udc_group
+ * \defgroup udc_group_interne Implementation of UDC
+ *
+ * Internal implementation
+ * @{
+ */
+
+//! \name Internal variables to manage the USB device
+//! @{
+
+//! Device status state (see enum usb_device_status in usb_protocol.h)
+static le16_t udc_device_status;
+
+COMPILER_WORD_ALIGNED
+//! Device interface setting value
+static uint8_t udc_iface_setting = 0;
+
+//! Device Configuration number selected by the USB host
+COMPILER_WORD_ALIGNED
+static uint8_t udc_num_configuration = 0;
+
+//! Pointer on the selected speed device configuration
+static udc_config_speed_t UDC_DESC_STORAGE *udc_ptr_conf;
+
+//! Pointer on interface descriptor used by SETUP request.
+static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;
+
+//! @}
+
+
+//! \name Internal structure to store the USB device main strings
+//! @{
+
+/**
+ * \brief Language ID of USB device (US ID by default)
+ */
+COMPILER_WORD_ALIGNED
+static UDC_DESC_STORAGE usb_str_lgid_desc_t udc_string_desc_languageid = {
+ .desc.bLength = sizeof(usb_str_lgid_desc_t),
+ .desc.bDescriptorType = USB_DT_STRING,
+ .string = {LE16(USB_LANGID_EN_US)}
+};
+
+/**
+ * \brief USB device manufacture name storage
+ * String is allocated only if USB_DEVICE_MANUFACTURE_NAME is declared
+ * by usb application configuration
+ */
+#ifdef USB_DEVICE_MANUFACTURE_NAME
+static uint8_t udc_string_manufacturer_name[] = USB_DEVICE_MANUFACTURE_NAME;
+# define USB_DEVICE_MANUFACTURE_NAME_SIZE \
+ (sizeof(udc_string_manufacturer_name)-1)
+#else
+# define USB_DEVICE_MANUFACTURE_NAME_SIZE 0
+#endif
+
+/**
+ * \brief USB device product name storage
+ * String is allocated only if USB_DEVICE_PRODUCT_NAME is declared
+ * by usb application configuration
+ */
+#ifdef USB_DEVICE_PRODUCT_NAME
+static uint8_t udc_string_product_name[] = USB_DEVICE_PRODUCT_NAME;
+# define USB_DEVICE_PRODUCT_NAME_SIZE (sizeof(udc_string_product_name)-1)
+#else
+# define USB_DEVICE_PRODUCT_NAME_SIZE 0
+#endif
+
+/**
+ * \brief Get USB device serial number
+ *
+ * Use the define USB_DEVICE_SERIAL_NAME to set static serial number.
+ *
+ * For dynamic serial number set the define USB_DEVICE_GET_SERIAL_NAME_POINTER
+ * to a suitable pointer. This will also require the serial number length
+ * define USB_DEVICE_GET_SERIAL_NAME_LENGTH.
+ */
+#if defined USB_DEVICE_GET_SERIAL_NAME_POINTER
+ static const uint8_t *udc_get_string_serial_name(void)
+ {
+ return (const uint8_t *)USB_DEVICE_GET_SERIAL_NAME_POINTER;
+ }
+# define USB_DEVICE_SERIAL_NAME_SIZE \
+ USB_DEVICE_GET_SERIAL_NAME_LENGTH
+#elif defined USB_DEVICE_SERIAL_NAME
+ static const uint8_t *udc_get_string_serial_name(void)
+ {
+ return (const uint8_t *)USB_DEVICE_SERIAL_NAME;
+ }
+# define USB_DEVICE_SERIAL_NAME_SIZE \
+ (sizeof(USB_DEVICE_SERIAL_NAME)-1)
+#else
+# define USB_DEVICE_SERIAL_NAME_SIZE 0
+#endif
+
+/**
+ * \brief USB device string descriptor
+ * Structure used to transfer ASCII strings to USB String descriptor structure.
+ */
+struct udc_string_desc_t {
+ usb_str_desc_t header;
+ le16_t string[Max(Max(USB_DEVICE_MANUFACTURE_NAME_SIZE, \
+ USB_DEVICE_PRODUCT_NAME_SIZE), USB_DEVICE_SERIAL_NAME_SIZE)];
+};
+COMPILER_WORD_ALIGNED
+static UDC_DESC_STORAGE struct udc_string_desc_t udc_string_desc = {
+ .header.bDescriptorType = USB_DT_STRING
+};
+//! @}
+
+usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void)
+{
+ return udc_ptr_iface;
+}
+
+/**
+ * \brief Returns a value to check the end of USB Configuration descriptor
+ *
+ * \return address after the last byte of USB Configuration descriptor
+ */
+static usb_conf_desc_t UDC_DESC_STORAGE *udc_get_eof_conf(void)
+{
+ return (UDC_DESC_STORAGE usb_conf_desc_t *) ((uint8_t *)
+ udc_ptr_conf->desc +
+ le16_to_cpu(udc_ptr_conf->desc->wTotalLength));
+}
+
+#if (0!=USB_DEVICE_MAX_EP)
+/**
+ * \brief Search specific descriptor in global interface descriptor
+ *
+ * \param desc Address of interface descriptor
+ * or previous specific descriptor found
+ * \param desc_id Descriptor ID to search
+ *
+ * \return address of specific descriptor found
+ * \return NULL if it is the end of global interface descriptor
+ */
+static usb_conf_desc_t UDC_DESC_STORAGE *udc_next_desc_in_iface(usb_conf_desc_t
+ UDC_DESC_STORAGE * desc, uint8_t desc_id)
+{
+ usb_conf_desc_t UDC_DESC_STORAGE *ptr_eof_desc;
+
+ ptr_eof_desc = udc_get_eof_conf();
+ // Go to next descriptor
+ desc = (UDC_DESC_STORAGE usb_conf_desc_t *) ((uint8_t *) desc +
+ desc->bLength);
+ // Check the end of configuration descriptor
+ while (ptr_eof_desc > desc) {
+ // If new interface descriptor is found,
+ // then it is the end of the current global interface descriptor
+ if (USB_DT_INTERFACE == desc->bDescriptorType) {
+ break; // End of global interface descriptor
+ }
+ if (desc_id == desc->bDescriptorType) {
+ return desc; // Specific descriptor found
+ }
+ // Go to next descriptor
+ desc = (UDC_DESC_STORAGE usb_conf_desc_t *) ((uint8_t *) desc +
+ desc->bLength);
+ }
+ return NULL; // No specific descriptor found
+}
+#endif
+
+/**
+ * \brief Search an interface descriptor
+ * This routine updates the internal pointer udc_ptr_iface.
+ *
+ * \param iface_num Interface number to find in Configuration Descriptor
+ * \param setting_num Setting number of interface to find
+ *
+ * \return 1 if found or 0 if not found
+ */
+static bool udc_update_iface_desc(uint8_t iface_num, uint8_t setting_num)
+{
+ usb_conf_desc_t UDC_DESC_STORAGE *ptr_end_desc;
+
+ if (0 == udc_num_configuration) {
+ return false;
+ }
+
+ if (iface_num >= udc_ptr_conf->desc->bNumInterfaces) {
+ return false;
+ }
+
+ // Start at the beginning of configuration descriptor
+ udc_ptr_iface = (UDC_DESC_STORAGE usb_iface_desc_t *)
+ udc_ptr_conf->desc;
+
+ // Check the end of configuration descriptor
+ ptr_end_desc = udc_get_eof_conf();
+ while (ptr_end_desc >
+ (UDC_DESC_STORAGE usb_conf_desc_t *) udc_ptr_iface) {
+ if (USB_DT_INTERFACE == udc_ptr_iface->bDescriptorType) {
+ // A interface descriptor is found
+ // Check interface and alternate setting number
+ if ((iface_num == udc_ptr_iface->bInterfaceNumber) &&
+ (setting_num ==
+ udc_ptr_iface->bAlternateSetting)) {
+ return true; // Interface found
+ }
+ }
+ // Go to next descriptor
+ udc_ptr_iface = (UDC_DESC_STORAGE usb_iface_desc_t *) (
+ (uint8_t *) udc_ptr_iface +
+ udc_ptr_iface->bLength);
+ }
+ return false; // Interface not found
+}
+
+/**
+ * \brief Disables an usb device interface (UDI)
+ * This routine call the UDI corresponding to interface number
+ *
+ * \param iface_num Interface number to disable
+ *
+ * \return 1 if it is done or 0 if interface is not found
+ */
+static bool udc_iface_disable(uint8_t iface_num)
+{
+ udi_api_t UDC_DESC_STORAGE *udi_api;
+
+ // Select first alternate setting of the interface
+ // to update udc_ptr_iface before call iface->getsetting()
+ if (!udc_update_iface_desc(iface_num, 0)) {
+ return false;
+ }
+
+ // Select the interface with the current alternate setting
+ udi_api = udc_ptr_conf->udi_apis[iface_num];
+
+#if (0!=USB_DEVICE_MAX_EP)
+ if (!udc_update_iface_desc(iface_num, udi_api->getsetting())) {
+ return false;
+ }
+
+ // Start at the beginning of interface descriptor
+ {
+ usb_ep_desc_t UDC_DESC_STORAGE *ep_desc;
+ ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *) udc_ptr_iface;
+ while (1) {
+ // Search Endpoint descriptor included in global interface descriptor
+ ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *)
+ udc_next_desc_in_iface((UDC_DESC_STORAGE
+ usb_conf_desc_t *)
+ ep_desc, USB_DT_ENDPOINT);
+ if (NULL == ep_desc) {
+ break;
+ }
+ // Free the endpoint used by the interface
+ udd_ep_free(ep_desc->bEndpointAddress);
+ }
+ }
+#endif
+
+ // Disable interface
+ udi_api->disable();
+ return true;
+}
+
+/**
+ * \brief Enables an usb device interface (UDI)
+ * This routine calls the UDI corresponding
+ * to the interface and setting number.
+ *
+ * \param iface_num Interface number to enable
+ * \param setting_num Setting number to enable
+ *
+ * \return 1 if it is done or 0 if interface is not found
+ */
+static bool udc_iface_enable(uint8_t iface_num, uint8_t setting_num)
+{
+ // Select the interface descriptor
+ if (!udc_update_iface_desc(iface_num, setting_num)) {
+ return false;
+ }
+
+#if (0!=USB_DEVICE_MAX_EP)
+ usb_ep_desc_t UDC_DESC_STORAGE *ep_desc;
+
+ // Start at the beginning of the global interface descriptor
+ ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *) udc_ptr_iface;
+ while (1) {
+ // Search Endpoint descriptor included in the global interface descriptor
+ ep_desc = (UDC_DESC_STORAGE usb_ep_desc_t *)
+ udc_next_desc_in_iface((UDC_DESC_STORAGE
+ usb_conf_desc_t *) ep_desc,
+ USB_DT_ENDPOINT);
+ if (NULL == ep_desc)
+ break;
+ // Alloc the endpoint used by the interface
+ if (!udd_ep_alloc(ep_desc->bEndpointAddress,
+ ep_desc->bmAttributes,
+ le16_to_cpu
+ (ep_desc->wMaxPacketSize))) {
+ return false;
+ }
+ }
+#endif
+ // Enable the interface
+ return udc_ptr_conf->udi_apis[iface_num]->enable();
+}
+
+/*! \brief Start the USB Device stack
+ */
+void udc_start(void)
+{
+ udd_enable();
+}
+
+/*! \brief Stop the USB Device stack
+ */
+void udc_stop(void)
+{
+ udd_disable();
+ udc_reset();
+}
+
+/**
+ * \brief Reset the current configuration of the USB device,
+ * This routines can be called by UDD when a RESET on the USB line occurs.
+ */
+void udc_reset(void)
+{
+ uint8_t iface_num;
+
+ if (udc_num_configuration) {
+ for (iface_num = 0;
+ iface_num < udc_ptr_conf->desc->bNumInterfaces;
+ iface_num++) {
+ udc_iface_disable(iface_num);
+ }
+ }
+ udc_num_configuration = 0;
+#if (USB_CONFIG_ATTR_REMOTE_WAKEUP \
+ == (USB_DEVICE_ATTR & USB_CONFIG_ATTR_REMOTE_WAKEUP))
+ if (CPU_TO_LE16(USB_DEV_STATUS_REMOTEWAKEUP) & udc_device_status) {
+ // Remote wakeup is enabled then disable it
+ UDC_REMOTEWAKEUP_DISABLE();
+ }
+#endif
+ udc_device_status =
+#if (USB_DEVICE_ATTR & USB_CONFIG_ATTR_SELF_POWERED)
+ CPU_TO_LE16(USB_DEV_STATUS_SELF_POWERED);
+#else
+ CPU_TO_LE16(USB_DEV_STATUS_BUS_POWERED);
+#endif
+}
+
+void udc_sof_notify(void)
+{
+ uint8_t iface_num;
+
+ if (udc_num_configuration) {
+ for (iface_num = 0;
+ iface_num < udc_ptr_conf->desc->bNumInterfaces;
+ iface_num++) {
+ if (udc_ptr_conf->udi_apis[iface_num]->sof_notify != NULL) {
+ udc_ptr_conf->udi_apis[iface_num]->sof_notify();
+ }
+ }
+ }
+}
+
+/**
+ * \brief Standard device request to get device status
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_get_status(void)
+{
+ if (udd_g_ctrlreq.req.wLength != sizeof(udc_device_status)) {
+ return false;
+ }
+
+ udd_set_setup_payload( (uint8_t *) & udc_device_status,
+ sizeof(udc_device_status));
+ return true;
+}
+
+#if (0!=USB_DEVICE_MAX_EP)
+/**
+ * \brief Standard endpoint request to get endpoint status
+ *
+ * \return true if success
+ */
+static bool udc_req_std_ep_get_status(void)
+{
+ static le16_t udc_ep_status;
+
+ if (udd_g_ctrlreq.req.wLength != sizeof(udc_ep_status)) {
+ return false;
+ }
+
+ udc_ep_status = udd_ep_is_halted(udd_g_ctrlreq.req.
+ wIndex & 0xFF) ? CPU_TO_LE16(USB_EP_STATUS_HALTED) : 0;
+
+ udd_set_setup_payload( (uint8_t *) & udc_ep_status,
+ sizeof(udc_ep_status));
+ return true;
+}
+#endif
+
+/**
+ * \brief Standard device request to change device status
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_clear_feature(void)
+{
+ if (udd_g_ctrlreq.req.wLength) {
+ return false;
+ }
+
+ if (udd_g_ctrlreq.req.wValue == USB_DEV_FEATURE_REMOTE_WAKEUP) {
+ udc_device_status &= CPU_TO_LE16(~(uint32_t)USB_DEV_STATUS_REMOTEWAKEUP);
+#if (USB_CONFIG_ATTR_REMOTE_WAKEUP \
+ == (USB_DEVICE_ATTR & USB_CONFIG_ATTR_REMOTE_WAKEUP))
+ UDC_REMOTEWAKEUP_DISABLE();
+#endif
+ return true;
+ }
+ return false;
+}
+
+#if (0!=USB_DEVICE_MAX_EP)
+/**
+ * \brief Standard endpoint request to clear endpoint feature
+ *
+ * \return true if success
+ */
+static bool udc_req_std_ep_clear_feature(void)
+{
+ if (udd_g_ctrlreq.req.wLength) {
+ return false;
+ }
+
+ if (udd_g_ctrlreq.req.wValue == USB_EP_FEATURE_HALT) {
+ return udd_ep_clear_halt(udd_g_ctrlreq.req.wIndex & 0xFF);
+ }
+ return false;
+}
+#endif
+
+/**
+ * \brief Standard device request to set a feature
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_set_feature(void)
+{
+ if (udd_g_ctrlreq.req.wLength) {
+ return false;
+ }
+
+ switch (udd_g_ctrlreq.req.wValue) {
+
+ case USB_DEV_FEATURE_REMOTE_WAKEUP:
+#if (USB_CONFIG_ATTR_REMOTE_WAKEUP \
+ == (USB_DEVICE_ATTR & USB_CONFIG_ATTR_REMOTE_WAKEUP))
+ udc_device_status |= CPU_TO_LE16(USB_DEV_STATUS_REMOTEWAKEUP);
+ UDC_REMOTEWAKEUP_ENABLE();
+ return true;
+#else
+ return false;
+#endif
+
+#ifdef USB_DEVICE_HS_SUPPORT
+ case USB_DEV_FEATURE_TEST_MODE:
+ if (!udd_is_high_speed()) {
+ break;
+ }
+ if (udd_g_ctrlreq.req.wIndex & 0xff) {
+ break;
+ }
+ // Unconfigure the device, terminating all ongoing requests
+ udc_reset();
+ switch ((udd_g_ctrlreq.req.wIndex >> 8) & 0xFF) {
+ case USB_DEV_TEST_MODE_J:
+ udd_g_ctrlreq.callback = udd_test_mode_j;
+ return true;
+
+ case USB_DEV_TEST_MODE_K:
+ udd_g_ctrlreq.callback = udd_test_mode_k;
+ return true;
+
+ case USB_DEV_TEST_MODE_SE0_NAK:
+ udd_g_ctrlreq.callback = udd_test_mode_se0_nak;
+ return true;
+
+ case USB_DEV_TEST_MODE_PACKET:
+ udd_g_ctrlreq.callback = udd_test_mode_packet;
+ return true;
+
+ case USB_DEV_TEST_MODE_FORCE_ENABLE: // Only for downstream facing hub ports
+ default:
+ break;
+ }
+ break;
+#endif
+ default:
+ break;
+ }
+ return false;
+}
+
+/**
+ * \brief Standard endpoint request to halt an endpoint
+ *
+ * \return true if success
+ */
+#if (0!=USB_DEVICE_MAX_EP)
+static bool udc_req_std_ep_set_feature(void)
+{
+ if (udd_g_ctrlreq.req.wLength) {
+ return false;
+ }
+ if (udd_g_ctrlreq.req.wValue == USB_EP_FEATURE_HALT) {
+ udd_ep_abort(udd_g_ctrlreq.req.wIndex & 0xFF);
+ return udd_ep_set_halt(udd_g_ctrlreq.req.wIndex & 0xFF);
+ }
+ return false;
+}
+#endif
+
+/**
+ * \brief Change the address of device
+ * Callback called at the end of request set address
+ */
+static void udc_valid_address(void)
+{
+ udd_set_address(udd_g_ctrlreq.req.wValue & 0x7F);
+}
+
+/**
+ * \brief Standard device request to set device address
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_set_address(void)
+{
+ if (udd_g_ctrlreq.req.wLength) {
+ return false;
+ }
+
+ // The address must be changed at the end of setup request after the handshake
+ // then we use a callback to change address
+ udd_g_ctrlreq.callback = udc_valid_address;
+ return true;
+}
+
+/**
+ * \brief Standard device request to get device string descriptor
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_get_str_desc(void)
+{
+ uint8_t i;
+ const uint8_t *str;
+ uint8_t str_length = 0;
+
+ // Link payload pointer to the string corresponding at request
+ switch (udd_g_ctrlreq.req.wValue & 0xff) {
+ case 0:
+ udd_set_setup_payload((uint8_t *) &udc_string_desc_languageid,
+ sizeof(udc_string_desc_languageid));
+ break;
+
+#ifdef USB_DEVICE_MANUFACTURE_NAME
+ case 1:
+ str_length = USB_DEVICE_MANUFACTURE_NAME_SIZE;
+ str = udc_string_manufacturer_name;
+ break;
+#endif
+#ifdef USB_DEVICE_PRODUCT_NAME
+ case 2:
+ str_length = USB_DEVICE_PRODUCT_NAME_SIZE;
+ str = udc_string_product_name;
+ break;
+#endif
+#if defined USB_DEVICE_SERIAL_NAME || defined USB_DEVICE_GET_SERIAL_NAME_POINTER
+ case 3:
+ str_length = USB_DEVICE_SERIAL_NAME_SIZE;
+ str = udc_get_string_serial_name();
+ break;
+#endif
+ default:
+#ifdef UDC_GET_EXTRA_STRING
+ if (UDC_GET_EXTRA_STRING()) {
+ break;
+ }
+#endif
+ return false;
+ }
+
+ if (str_length) {
+ for(i = 0; i < str_length; i++) {
+ udc_string_desc.string[i] = cpu_to_le16((le16_t)str[i]);
+ }
+
+ udc_string_desc.header.bLength = 2 + (str_length) * 2;
+ udd_set_setup_payload(
+ (uint8_t *) &udc_string_desc,
+ udc_string_desc.header.bLength);
+ }
+
+ return true;
+}
+
+/**
+ * \brief Standard device request to get descriptors about USB device
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_get_descriptor(void)
+{
+ uint8_t conf_num;
+
+ conf_num = udd_g_ctrlreq.req.wValue & 0xff;
+
+ // Check descriptor ID
+ switch ((uint8_t) (udd_g_ctrlreq.req.wValue >> 8)) {
+ case USB_DT_DEVICE:
+ // Device descriptor requested
+#ifdef USB_DEVICE_HS_SUPPORT
+ if (!udd_is_high_speed()) {
+ udd_set_setup_payload(
+ (uint8_t *) udc_config.confdev_hs,
+ udc_config.confdev_hs->bLength);
+ } else
+#endif
+ {
+ udd_set_setup_payload(
+ (uint8_t *) udc_config.confdev_lsfs,
+ udc_config.confdev_lsfs->bLength);
+ }
+ break;
+
+ case USB_DT_CONFIGURATION:
+ // Configuration descriptor requested
+#ifdef USB_DEVICE_HS_SUPPORT
+ if (udd_is_high_speed()) {
+ // HS descriptor
+ if (conf_num >= udc_config.confdev_hs->
+ bNumConfigurations) {
+ return false;
+ }
+ udd_set_setup_payload(
+ (uint8_t *)udc_config.conf_hs[conf_num].desc,
+ le16_to_cpu(udc_config.conf_hs[conf_num].desc->wTotalLength));
+ } else
+#endif
+ {
+ // FS descriptor
+ if (conf_num >= udc_config.confdev_lsfs->
+ bNumConfigurations) {
+ return false;
+ }
+ udd_set_setup_payload(
+ (uint8_t *)udc_config.conf_lsfs[conf_num].desc,
+ le16_to_cpu(udc_config.conf_lsfs[conf_num].desc->wTotalLength));
+ }
+ ((usb_conf_desc_t *) udd_g_ctrlreq.payload)->bDescriptorType =
+ USB_DT_CONFIGURATION;
+ break;
+
+#ifdef USB_DEVICE_HS_SUPPORT
+ case USB_DT_DEVICE_QUALIFIER:
+ // Device qualifier descriptor requested
+ udd_set_setup_payload( (uint8_t *) udc_config.qualifier,
+ udc_config.qualifier->bLength);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIGURATION:
+ // Other configuration descriptor requested
+ if (!udd_is_high_speed()) {
+ // HS descriptor
+ if (conf_num >= udc_config.confdev_hs->
+ bNumConfigurations) {
+ return false;
+ }
+ udd_set_setup_payload(
+ (uint8_t *)udc_config.conf_hs[conf_num].desc,
+ le16_to_cpu(udc_config.conf_hs[conf_num].desc->wTotalLength));
+ } else {
+ // FS descriptor
+ if (conf_num >= udc_config.confdev_lsfs->
+ bNumConfigurations) {
+ return false;
+ }
+ udd_set_setup_payload(
+ (uint8_t *)udc_config.conf_lsfs[conf_num].desc,
+ le16_to_cpu(udc_config.conf_lsfs[conf_num].desc->wTotalLength));
+ }
+ ((usb_conf_desc_t *) udd_g_ctrlreq.payload)->bDescriptorType =
+ USB_DT_OTHER_SPEED_CONFIGURATION;
+ break;
+#endif
+
+ case USB_DT_BOS:
+ // Device BOS descriptor requested
+ if (udc_config.conf_bos == NULL) {
+ return false;
+ }
+ udd_set_setup_payload( (uint8_t *) udc_config.conf_bos,
+ udc_config.conf_bos->wTotalLength);
+ break;
+
+ case USB_DT_STRING:
+ // String descriptor requested
+ if (!udc_req_std_dev_get_str_desc()) {
+ return false;
+ }
+ break;
+
+ default:
+ // Unknown descriptor requested
+ return false;
+ }
+ // if the descriptor is larger than length requested, then reduce it
+ if (udd_g_ctrlreq.req.wLength < udd_g_ctrlreq.payload_size) {
+ udd_g_ctrlreq.payload_size = udd_g_ctrlreq.req.wLength;
+ }
+ return true;
+}
+
+/**
+ * \brief Standard device request to get configuration number
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_get_configuration(void)
+{
+ if (udd_g_ctrlreq.req.wLength != 1) {
+ return false;
+ }
+
+ udd_set_setup_payload(&udc_num_configuration,1);
+ return true;
+}
+
+/**
+ * \brief Standard device request to enable a configuration
+ *
+ * \return true if success
+ */
+static bool udc_req_std_dev_set_configuration(void)
+{
+ uint8_t iface_num;
+
+ // Check request length
+ if (udd_g_ctrlreq.req.wLength) {
+ return false;
+ }
+ // Authorize configuration only if the address is valid
+ if (!udd_getaddress()) {
+ return false;
+ }
+ // Check the configuration number requested
+#ifdef USB_DEVICE_HS_SUPPORT
+ if (udd_is_high_speed()) {
+ // HS descriptor
+ if ((udd_g_ctrlreq.req.wValue & 0xFF) >
+ udc_config.confdev_hs->bNumConfigurations) {
+ return false;
+ }
+ } else
+#endif
+ {
+ // FS descriptor
+ if ((udd_g_ctrlreq.req.wValue & 0xFF) >
+ udc_config.confdev_lsfs->bNumConfigurations) {
+ return false;
+ }
+ }
+
+ // Reset current configuration
+ udc_reset();
+
+ // Enable new configuration
+ udc_num_configuration = udd_g_ctrlreq.req.wValue & 0xFF;
+ if (udc_num_configuration == 0) {
+ return true; // Default empty configuration requested
+ }
+ // Update pointer of the configuration descriptor
+#ifdef USB_DEVICE_HS_SUPPORT
+ if (udd_is_high_speed()) {
+ // HS descriptor
+ udc_ptr_conf = &udc_config.conf_hs[udc_num_configuration - 1];
+ } else
+#endif
+ {
+ // FS descriptor
+ udc_ptr_conf = &udc_config.conf_lsfs[udc_num_configuration - 1];
+ }
+ // Enable all interfaces of the selected configuration
+ for (iface_num = 0; iface_num < udc_ptr_conf->desc->bNumInterfaces;
+ iface_num++) {
+ if (!udc_iface_enable(iface_num, 0)) {
+ return false;
+ }
+ }
+ return true;
+}
+
+/**
+ * \brief Standard interface request
+ * to get the alternate setting number of an interface
+ *
+ * \return true if success
+ */
+static bool udc_req_std_iface_get_setting(void)
+{
+ uint8_t iface_num;
+ udi_api_t UDC_DESC_STORAGE *udi_api;
+
+ if (udd_g_ctrlreq.req.wLength != 1) {
+ return false; // Error in request
+ }
+ if (!udc_num_configuration) {
+ return false; // The device is not is configured state yet
+ }
+
+ // Check the interface number included in the request
+ iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
+ if (iface_num >= udc_ptr_conf->desc->bNumInterfaces) {
+ return false;
+ }
+
+ // Select first alternate setting of the interface to update udc_ptr_iface
+ // before call iface->getsetting()
+ if (!udc_update_iface_desc(iface_num, 0)) {
+ return false;
+ }
+ // Get alternate setting from UDI
+ udi_api = udc_ptr_conf->udi_apis[iface_num];
+ udc_iface_setting = udi_api->getsetting();
+
+ // Link value to payload pointer of request
+ udd_set_setup_payload(&udc_iface_setting,1);
+ return true;
+}
+
+/**
+ * \brief Standard interface request
+ * to set an alternate setting of an interface
+ *
+ * \return true if success
+ */
+static bool udc_req_std_iface_set_setting(void)
+{
+ uint8_t iface_num, setting_num;
+
+ if (udd_g_ctrlreq.req.wLength) {
+ return false; // Error in request
+ }
+ if (!udc_num_configuration) {
+ return false; // The device is not is configured state yet
+ }
+
+ iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
+ setting_num = udd_g_ctrlreq.req.wValue & 0xFF;
+
+ // Disable current setting
+ if (!udc_iface_disable(iface_num)) {
+ return false;
+ }
+
+ // Enable new setting
+ return udc_iface_enable(iface_num, setting_num);
+}
+
+/**
+ * \brief Main routine to manage the standard USB SETUP request
+ *
+ * \return true if the request is supported
+ */
+static bool udc_reqstd(void)
+{
+ if (Udd_setup_is_in()) {
+ // GET Standard Requests
+ if (udd_g_ctrlreq.req.wLength == 0) {
+ return false; // Error for USB host
+ }
+
+ if (USB_REQ_RECIP_DEVICE == Udd_setup_recipient()) {
+ // Standard Get Device request
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_GET_STATUS:
+ return udc_req_std_dev_get_status();
+ case USB_REQ_GET_DESCRIPTOR:
+ return udc_req_std_dev_get_descriptor();
+ case USB_REQ_GET_CONFIGURATION:
+ return udc_req_std_dev_get_configuration();
+ default:
+ break;
+ }
+ }
+
+ if (USB_REQ_RECIP_INTERFACE == Udd_setup_recipient()) {
+ // Standard Get Interface request
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_GET_INTERFACE:
+ return udc_req_std_iface_get_setting();
+ default:
+ break;
+ }
+ }
+#if (0!=USB_DEVICE_MAX_EP)
+ if (USB_REQ_RECIP_ENDPOINT == Udd_setup_recipient()) {
+ // Standard Get Endpoint request
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_GET_STATUS:
+ return udc_req_std_ep_get_status();
+ default:
+ break;
+ }
+ }
+#endif
+ } else {
+ // SET Standard Requests
+ if (USB_REQ_RECIP_DEVICE == Udd_setup_recipient()) {
+ // Standard Set Device request
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ return udc_req_std_dev_set_address();
+ case USB_REQ_CLEAR_FEATURE:
+ return udc_req_std_dev_clear_feature();
+ case USB_REQ_SET_FEATURE:
+ return udc_req_std_dev_set_feature();
+ case USB_REQ_SET_CONFIGURATION:
+ return udc_req_std_dev_set_configuration();
+ case USB_REQ_SET_DESCRIPTOR:
+ /* Not supported (defined as optional by the USB 2.0 spec) */
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (USB_REQ_RECIP_INTERFACE == Udd_setup_recipient()) {
+ // Standard Set Interface request
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_SET_INTERFACE:
+ return udc_req_std_iface_set_setting();
+ default:
+ break;
+ }
+ }
+#if (0!=USB_DEVICE_MAX_EP)
+ if (USB_REQ_RECIP_ENDPOINT == Udd_setup_recipient()) {
+ // Standard Set Endpoint request
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_CLEAR_FEATURE:
+ return udc_req_std_ep_clear_feature();
+ case USB_REQ_SET_FEATURE:
+ return udc_req_std_ep_set_feature();
+ default:
+ break;
+ }
+ }
+#endif
+ }
+ return false;
+}
+
+/**
+ * \brief Send the SETUP interface request to UDI
+ *
+ * \return true if the request is supported
+ */
+static bool udc_req_iface(void)
+{
+ uint8_t iface_num;
+ udi_api_t UDC_DESC_STORAGE *udi_api;
+
+ if (0 == udc_num_configuration) {
+ return false; // The device is not is configured state yet
+ }
+ // Check interface number
+ iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
+ if (iface_num >= udc_ptr_conf->desc->bNumInterfaces) {
+ return false;
+ }
+
+ //* To update udc_ptr_iface with the selected interface in request
+ // Select first alternate setting of interface to update udc_ptr_iface
+ // before calling udi_api->getsetting()
+ if (!udc_update_iface_desc(iface_num, 0)) {
+ return false;
+ }
+ // Select the interface with the current alternate setting
+ udi_api = udc_ptr_conf->udi_apis[iface_num];
+ if (!udc_update_iface_desc(iface_num, udi_api->getsetting())) {
+ return false;
+ }
+
+ // Send the SETUP request to the UDI corresponding to the interface number
+ return udi_api->setup();
+}
+
+/**
+ * \brief Send the SETUP interface request to UDI
+ *
+ * \return true if the request is supported
+ */
+static bool udc_req_ep(void)
+{
+ uint8_t iface_num;
+ udi_api_t UDC_DESC_STORAGE *udi_api;
+
+ if (0 == udc_num_configuration) {
+ return false; // The device is not is configured state yet
+ }
+ // Send this request on all enabled interfaces
+ iface_num = udd_g_ctrlreq.req.wIndex & 0xFF;
+ for (iface_num = 0; iface_num < udc_ptr_conf->desc->bNumInterfaces;
+ iface_num++) {
+ // Select the interface with the current alternate setting
+ udi_api = udc_ptr_conf->udi_apis[iface_num];
+ if (!udc_update_iface_desc(iface_num, udi_api->getsetting())) {
+ return false;
+ }
+
+ // Send the SETUP request to the UDI
+ if (udi_api->setup()) {
+ return true;
+ }
+ }
+ return false;
+}
+
+/**
+ * \brief Main routine to manage the USB SETUP request.
+ *
+ * This function parses a USB SETUP request and submits an appropriate
+ * response back to the host or, in the case of SETUP OUT requests
+ * with data, sets up a buffer for receiving the data payload.
+ *
+ * The main standard requests defined by the USB 2.0 standard are handled
+ * internally. The interface requests are sent to UDI, and the specific request
+ * sent to a specific application callback.
+ *
+ * \return true if the request is supported, else the request is stalled by UDD
+ */
+bool udc_process_setup(void)
+{
+ // By default no data (receive/send) and no callbacks registered
+ udd_g_ctrlreq.payload_size = 0;
+ udd_g_ctrlreq.callback = NULL;
+ udd_g_ctrlreq.over_under_run = NULL;
+
+ if (Udd_setup_is_in()) {
+ if (udd_g_ctrlreq.req.wLength == 0) {
+ return false; // Error from USB host
+ }
+ }
+
+ // If standard request then try to decode it in UDC
+ if (Udd_setup_type() == USB_REQ_TYPE_STANDARD) {
+ if (udc_reqstd()) {
+ return true;
+ }
+ }
+
+ // If interface request then try to decode it in UDI
+ if (Udd_setup_recipient() == USB_REQ_RECIP_INTERFACE) {
+ if (udc_req_iface()) {
+ return true;
+ }
+ }
+
+ // If endpoint request then try to decode it in UDI
+ if (Udd_setup_recipient() == USB_REQ_RECIP_ENDPOINT) {
+ if (udc_req_ep()) {
+ return true;
+ }
+ }
+
+ // Here SETUP request unknown by UDC and UDIs
+#ifdef USB_DEVICE_SPECIFIC_REQUEST
+ // Try to decode it in specific callback
+ return USB_DEVICE_SPECIFIC_REQUEST(); // Ex: Vendor request,...
+#else
+ return false;
+#endif
+}
+
+//! @}
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udc.h b/Marlin/src/HAL/HAL_DUE/usb/udc.h
new file mode 100644
index 0000000000..edfe70788b
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udc.h
@@ -0,0 +1,697 @@
+/**
+ * \file
+ *
+ * \brief Interface of the USB Device Controller (UDC)
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDC_H_
+#define _UDC_H_
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "udc_desc.h"
+#include "udd.h"
+
+#if USB_DEVICE_VENDOR_ID == 0
+# error USB_DEVICE_VENDOR_ID cannot be equal to 0
+#endif
+
+#if USB_DEVICE_PRODUCT_ID == 0
+# error USB_DEVICE_PRODUCT_ID cannot be equal to 0
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup usb_device_group
+ * \defgroup udc_group USB Device Controller (UDC)
+ *
+ * The UDC provides a high-level abstraction of the usb device.
+ * You can use these functions to control the main device state
+ * (start/attach/wakeup).
+ *
+ * \section USB_DEVICE_CONF USB Device Custom configuration
+ * The following USB Device configuration must be included in the conf_usb.h
+ * file of the application.
+ *
+ * USB_DEVICE_VENDOR_ID (Word)
+ * Vendor ID provided by USB org (ATMEL 0x03EB).
+ *
+ * USB_DEVICE_PRODUCT_ID (Word)
+ * Product ID (Referenced in usb_atmel.h).
+ *
+ * USB_DEVICE_MAJOR_VERSION (Byte)
+ * Major version of the device
+ *
+ * USB_DEVICE_MINOR_VERSION (Byte)
+ * Minor version of the device
+ *
+ * USB_DEVICE_MANUFACTURE_NAME (string)
+ * ASCII name for the manufacture
+ *
+ * USB_DEVICE_PRODUCT_NAME (string)
+ * ASCII name for the product
+ *
+ * USB_DEVICE_SERIAL_NAME (string)
+ * ASCII name to enable and set a serial number
+ *
+ * USB_DEVICE_POWER (Numeric)
+ * (unit mA) Maximum device power
+ *
+ * USB_DEVICE_ATTR (Byte)
+ * USB attributes available:
+ * - USB_CONFIG_ATTR_SELF_POWERED
+ * - USB_CONFIG_ATTR_REMOTE_WAKEUP
+ * Note: if remote wake enabled then defines remotewakeup callbacks,
+ * see Table 5-2. External API from UDC - Callback
+ *
+ * USB_DEVICE_LOW_SPEED (Only defined)
+ * Force the USB Device to run in low speed
+ *
+ * USB_DEVICE_HS_SUPPORT (Only defined)
+ * Authorize the USB Device to run in high speed
+ *
+ * USB_DEVICE_MAX_EP (Byte)
+ * Define the maximum endpoint number used by the USB Device.
+ * This one is already defined in UDI default configuration.
+ * Ex:
+ * - When endpoint control 0x00, endpoint 0x01 and
+ * endpoint 0x82 is used then USB_DEVICE_MAX_EP=2
+ * - When only endpoint control 0x00 is used then USB_DEVICE_MAX_EP=0
+ * - When endpoint 0x01 and endpoint 0x81 is used then USB_DEVICE_MAX_EP=1
+ * (configuration not possible on USBB interface)
+ * @{
+ */
+
+/**
+ * \brief Authorizes the VBUS event
+ *
+ * \return true, if the VBUS monitoring is possible.
+ *
+ * \section udc_vbus_monitoring VBus monitoring used cases
+ *
+ * The VBus monitoring is used only for USB SELF Power application.
+ *
+ * - By default the USB device is automatically attached when Vbus is high
+ * or when USB is start for devices without internal Vbus monitoring.
+ * conf_usb.h file does not contains define USB_DEVICE_ATTACH_AUTO_DISABLE.
+ * \code //#define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
+ *
+ * - Add custom VBUS monitoring. conf_usb.h file contains define
+ * USB_DEVICE_ATTACH_AUTO_DISABLE:
+ * \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
+ * User C file contains:
+ * \code
+ // Authorize VBUS monitoring
+ if (!udc_include_vbus_monitoring()) {
+ // Implement custom VBUS monitoring via GPIO or other
+ }
+ Event_VBUS_present() // VBUS interrupt or GPIO interrupt or other
+ {
+ // Attach USB Device
+ udc_attach();
+ }
+\endcode
+ *
+ * - Case of battery charging. conf_usb.h file contains define
+ * USB_DEVICE_ATTACH_AUTO_DISABLE:
+ * \code #define USB_DEVICE_ATTACH_AUTO_DISABLE \endcode
+ * User C file contains:
+ * \code
+ Event VBUS present() // VBUS interrupt or GPIO interrupt or ..
+ {
+ // Authorize battery charging, but wait key press to start USB.
+ }
+ Event Key press()
+ {
+ // Stop batteries charging
+ // Start USB
+ udc_attach();
+ }
+\endcode
+ */
+static inline bool udc_include_vbus_monitoring(void)
+{
+ return udd_include_vbus_monitoring();
+}
+
+/*! \brief Start the USB Device stack
+ */
+void udc_start(void);
+
+/*! \brief Stop the USB Device stack
+ */
+void udc_stop(void);
+
+/**
+ * \brief Attach device to the bus when possible
+ *
+ * \warning If a VBus control is included in driver,
+ * then it will attach device when an acceptable Vbus
+ * level from the host is detected.
+ */
+static inline void udc_attach(void)
+{
+ udd_attach();
+}
+
+
+/**
+ * \brief Detaches the device from the bus
+ *
+ * The driver must remove pull-up on USB line D- or D+.
+ */
+static inline void udc_detach(void)
+{
+ udd_detach();
+}
+
+
+/*! \brief The USB driver sends a resume signal called \e "Upstream Resume"
+ * This is authorized only when the remote wakeup feature is enabled by host.
+ */
+static inline void udc_remotewakeup(void)
+{
+ udd_send_remotewakeup();
+}
+
+
+/**
+ * \brief Returns a pointer on the current interface descriptor
+ *
+ * \return pointer on the current interface descriptor.
+ */
+usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
+
+//@}
+
+/**
+ * \ingroup usb_group
+ * \defgroup usb_device_group USB Stack Device
+ *
+ * This module includes USB Stack Device implementation.
+ * The stack is divided in three parts:
+ * - USB Device Controller (UDC) provides USB chapter 9 compliance
+ * - USB Device Interface (UDI) provides USB Class compliance
+ * - USB Device Driver (UDD) provides USB Driver for each Atmel MCU
+
+ * Many USB Device applications can be implemented on Atmel MCU.
+ * Atmel provides many application notes for different applications:
+ * - AVR4900, provides general information about Device Stack
+ * - AVR4901, explains how to create a new class
+ * - AVR4902, explains how to create a composite device
+ * - AVR49xx, all device classes provided in ASF have an application note
+ *
+ * A basic USB knowledge is required to understand the USB Device
+ * Class application notes (HID,MS,CDC,PHDC,...).
+ * Then, to create an USB device with
+ * only one class provided by ASF, refer directly to the application note
+ * corresponding to this USB class. The USB Device application note for
+ * New Class and Composite is dedicated to advanced USB users.
+ *
+ * @{
+ */
+
+//! @}
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+ * \ingroup udc_group
+ * \defgroup udc_basic_use_case_setup_prereq USB Device Controller (UDC) - Prerequisites
+ * Common prerequisites for all USB devices.
+ *
+ * This module is based on USB device stack full interrupt driven, and supporting
+ * \ref sleepmgr_group sleepmgr. For AVR and SAM3/4 devices the \ref clk_group clock services
+ * is supported. For SAMD devices the \ref asfdoc_sam0_system_clock_group clock driver is supported.
+ *
+ * The following procedure must be executed to setup the project correctly:
+ * - Specify the clock configuration:
+ * - XMEGA USB devices need 48MHz clock input.\n
+ * XMEGA USB devices need CPU frequency higher than 12MHz.\n
+ * You can use either an internal RC48MHz auto calibrated by Start of Frames
+ * or an external OSC.
+ * - UC3 and SAM3/4 devices without USB high speed support need 48MHz clock input.\n
+ * You must use a PLL and an external OSC.
+ * - UC3 and SAM3/4 devices with USB high speed support need 12MHz clock input.\n
+ * You must use an external OSC.
+ * - UC3 devices with USBC hardware need CPU frequency higher than 25MHz.
+ * - SAMD devices without USB high speed support need 48MHz clock input.\n
+ * You should use DFLL with USBCRM.
+ * - In conf_board.h, the define CONF_BOARD_USB_PORT must be added to enable USB lines.
+ * (Not mandatory for all boards)
+ * - Enable interrupts
+ * - Initialize the clock service
+ *
+ * The usage of \ref sleepmgr_group sleepmgr service is optional, but recommended to reduce power
+ * consumption:
+ * - Initialize the sleep manager service
+ * - Activate sleep mode when the application is in IDLE state
+ *
+ * \subpage udc_conf_clock.
+ *
+ * for AVR and SAM3/4 devices, add to the initialization code:
+ * \code
+ sysclk_init();
+ irq_initialize_vectors();
+ cpu_irq_enable();
+ board_init();
+ sleepmgr_init(); // Optional
+\endcode
+ *
+ * For SAMD devices, add to the initialization code:
+ * \code
+ system_init();
+ irq_initialize_vectors();
+ cpu_irq_enable();
+ sleepmgr_init(); // Optional
+\endcode
+ * Add to the main IDLE loop:
+ * \code
+ sleepmgr_enter_sleep(); // Optional
+\endcode
+ *
+ */
+
+/**
+ * \ingroup udc_group
+ * \defgroup udc_basic_use_case_setup_code USB Device Controller (UDC) - Example code
+ * Common example code for all USB devices.
+ *
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_VENDOR_ID 0x03EB
+ #define USB_DEVICE_PRODUCT_ID 0xXXXX
+ #define USB_DEVICE_MAJOR_VERSION 1
+ #define USB_DEVICE_MINOR_VERSION 0
+ #define USB_DEVICE_POWER 100
+ #define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ void usb_init(void)
+ {
+ udc_start();
+ }
+\endcode
+ */
+
+/**
+ * \ingroup udc_group
+ * \defgroup udc_basic_use_case_setup_flow USB Device Controller (UDC) - Workflow
+ * Common workflow for all USB devices.
+ *
+ * -# Ensure that conf_usb.h is available and contains the following configuration
+ * which is the main USB device configuration:
+ * - \code // Vendor ID provided by USB org (ATMEL 0x03EB)
+ #define USB_DEVICE_VENDOR_ID 0x03EB // Type Word
+ // Product ID (Atmel PID referenced in usb_atmel.h)
+ #define USB_DEVICE_PRODUCT_ID 0xXXXX // Type Word
+ // Major version of the device
+ #define USB_DEVICE_MAJOR_VERSION 1 // Type Byte
+ // Minor version of the device
+ #define USB_DEVICE_MINOR_VERSION 0 // Type Byte
+ // Maximum device power (mA)
+ #define USB_DEVICE_POWER 100 // Type 9-bits
+ // USB attributes to enable features
+ #define USB_DEVICE_ATTR USB_CONFIG_ATTR_BUS_POWERED // Flags \endcode
+ * -# Call the USB device stack start function to enable stack and start USB:
+ * - \code udc_start(); \endcode
+ * \note In case of USB dual roles (Device and Host) managed through USB OTG connector
+ * (USB ID pin), the call of udc_start() must be removed and replaced by uhc_start().
+ * SeRefer to "AVR4950 section 6.1 Dual roles" for further information about dual roles.
+ */
+
+/**
+ * \page udc_conf_clock conf_clock.h examples with USB support
+ *
+ * Content of XMEGA conf_clock.h:
+ * \code
+ // Configuration based on internal RC:
+ // USB clock need of 48Mhz
+ #define CONFIG_USBCLK_SOURCE USBCLK_SRC_RCOSC
+ #define CONFIG_OSC_RC32_CAL 48000000UL
+ #define CONFIG_OSC_AUTOCAL_RC32MHZ_REF_OSC OSC_ID_USBSOF
+ // CPU clock need of clock > 12MHz to run with USB (Here 24MHz)
+ #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_RC32MHZ
+ #define CONFIG_SYSCLK_PSADIV SYSCLK_PSADIV_2
+ #define CONFIG_SYSCLK_PSBCDIV SYSCLK_PSBCDIV_1_1
+\endcode
+ *
+ * Content of conf_clock.h for AT32UC3A0, AT32UC3A1, AT32UC3B devices (USBB):
+ * \code
+ // Configuration based on 12MHz external OSC:
+ #define CONFIG_PLL1_SOURCE PLL_SRC_OSC0
+ #define CONFIG_PLL1_MUL 8
+ #define CONFIG_PLL1_DIV 2
+ #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
+ #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
+\endcode
+ *
+ * Content of conf_clock.h for AT32UC3A3, AT32UC3A4 devices (USBB with high speed support):
+ * \code
+ // Configuration based on 12MHz external OSC:
+ #define CONFIG_USBCLK_SOURCE USBCLK_SRC_OSC0
+ #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
+\endcode
+ *
+ * Content of conf_clock.h for AT32UC3C, ATUCXXD, ATUCXXL3U, ATUCXXL4U devices (USBC):
+ * \code
+ // Configuration based on 12MHz external OSC:
+ #define CONFIG_PLL1_SOURCE PLL_SRC_OSC0
+ #define CONFIG_PLL1_MUL 8
+ #define CONFIG_PLL1_DIV 2
+ #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
+ #define CONFIG_USBCLK_DIV 1 // Fusb = Fsys/(2 ^ USB_div)
+ // CPU clock need of clock > 25MHz to run with USBC
+ #define CONFIG_SYSCLK_SOURCE SYSCLK_SRC_PLL1
+\endcode
+ *
+ * Content of conf_clock.h for SAM3S, SAM3SD, SAM4S devices (UPD: USB Peripheral Device):
+ * \code
+ // PLL1 (B) Options (Fpll = (Fclk * PLL_mul) / PLL_div)
+ #define CONFIG_PLL1_SOURCE PLL_SRC_MAINCK_XTAL
+ #define CONFIG_PLL1_MUL 16
+ #define CONFIG_PLL1_DIV 2
+ // USB Clock Source Options (Fusb = FpllX / USB_div)
+ #define CONFIG_USBCLK_SOURCE USBCLK_SRC_PLL1
+ #define CONFIG_USBCLK_DIV 2
+\endcode
+ *
+ * Content of conf_clock.h for SAM3U device (UPDHS: USB Peripheral Device High Speed):
+ * \code
+ // USB Clock Source fixed at UPLL.
+\endcode
+ *
+ * Content of conf_clock.h for SAM3X, SAM3A devices (UOTGHS: USB OTG High Speed):
+ * \code
+ // USB Clock Source fixed at UPLL.
+ #define CONFIG_USBCLK_SOURCE USBCLK_SRC_UPLL
+ #define CONFIG_USBCLK_DIV 1
+\endcode
+ *
+ * Content of conf_clocks.h for SAMD devices (USB):
+ * \code
+ // System clock bus configuration
+ # define CONF_CLOCK_FLASH_WAIT_STATES 2
+
+ // USB Clock Source fixed at DFLL.
+ // SYSTEM_CLOCK_SOURCE_DFLL configuration - Digital Frequency Locked Loop
+ # define CONF_CLOCK_DFLL_ENABLE true
+ # define CONF_CLOCK_DFLL_LOOP_MODE SYSTEM_CLOCK_DFLL_LOOP_MODE_USB_RECOVERY
+ # define CONF_CLOCK_DFLL_ON_DEMAND true
+
+ // Set this to true to configure the GCLK when running clocks_init.
+ // If set to false, none of the GCLK generators will be configured in clocks_init().
+ # define CONF_CLOCK_CONFIGURE_GCLK true
+
+ // Configure GCLK generator 0 (Main Clock)
+ # define CONF_CLOCK_GCLK_0_ENABLE true
+ # define CONF_CLOCK_GCLK_0_RUN_IN_STANDBY true
+ # define CONF_CLOCK_GCLK_0_CLOCK_SOURCE SYSTEM_CLOCK_SOURCE_DFLL
+ # define CONF_CLOCK_GCLK_0_PRESCALER 1
+ # define CONF_CLOCK_GCLK_0_OUTPUT_ENABLE false
+\endcode
+ */
+
+/**
+ * \page udc_use_case_1 Change USB speed
+ *
+ * In this use case, the USB device is used with different USB speeds.
+ *
+ * \section udc_use_case_1_setup Setup steps
+ *
+ * Prior to implement this use case, be sure to have already
+ * apply the UDI module "basic use case".
+ *
+ * \section udc_use_case_1_usage Usage steps
+ *
+ * \subsection udc_use_case_1_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #if // Low speed
+ #define USB_DEVICE_LOW_SPEED
+ // #define USB_DEVICE_HS_SUPPORT
+
+ #elif // Full speed
+ // #define USB_DEVICE_LOW_SPEED
+ // #define USB_DEVICE_HS_SUPPORT
+
+ #elif // High speed
+ // #define USB_DEVICE_LOW_SPEED
+ #define USB_DEVICE_HS_SUPPORT
+
+ #endif
+\endcode
+ *
+ * \subsection udc_use_case_1_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required for a USB device low speed (1.5Mbit/s):
+ * - \code #define USB_DEVICE_LOW_SPEED
+ //#define USB_DEVICE_HS_SUPPORT \endcode
+ * -# Ensure that conf_usb.h contains the following parameters
+ * required for a USB device full speed (12Mbit/s):
+ * - \code //#define USB_DEVICE_LOW_SPEED
+ //#define USB_DEVICE_HS_SUPPORT \endcode
+ * -# Ensure that conf_usb.h contains the following parameters
+ * required for a USB device high speed (480Mbit/s):
+ * - \code //#define USB_DEVICE_LOW_SPEED
+ #define USB_DEVICE_HS_SUPPORT \endcode
+ */
+
+/**
+ * \page udc_use_case_2 Use USB strings
+ *
+ * In this use case, the usual USB strings is added in the USB device.
+ *
+ * \section udc_use_case_2_setup Setup steps
+ * Prior to implement this use case, be sure to have already
+ * apply the UDI module "basic use case".
+ *
+ * \section udc_use_case_2_usage Usage steps
+ *
+ * \subsection udc_use_case_2_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_MANUFACTURE_NAME "Manufacture name"
+ #define USB_DEVICE_PRODUCT_NAME "Product name"
+ #define USB_DEVICE_SERIAL_NAME "12...EF"
+\endcode
+ *
+ * \subsection udc_use_case_2_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required to enable different USB strings:
+ * - \code // Static ASCII name for the manufacture
+ #define USB_DEVICE_MANUFACTURE_NAME "Manufacture name" \endcode
+ * - \code // Static ASCII name for the product
+ #define USB_DEVICE_PRODUCT_NAME "Product name" \endcode
+ * - \code // Static ASCII name to enable and set a serial number
+ #define USB_DEVICE_SERIAL_NAME "12...EF" \endcode
+ */
+
+/**
+ * \page udc_use_case_3 Use USB remote wakeup feature
+ *
+ * In this use case, the USB remote wakeup feature is enabled.
+ *
+ * \section udc_use_case_3_setup Setup steps
+ * Prior to implement this use case, be sure to have already
+ * apply the UDI module "basic use case".
+ *
+ * \section udc_use_case_3_usage Usage steps
+ *
+ * \subsection udc_use_case_3_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_ATTR \
+ (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED)
+ #define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
+ extern void my_callback_remotewakeup_enable(void);
+ #define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
+ extern void my_callback_remotewakeup_disable(void);
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ void my_callback_remotewakeup_enable(void)
+ {
+ // Enable application wakeup events (e.g. enable GPIO interrupt)
+ }
+ void my_callback_remotewakeup_disable(void)
+ {
+ // Disable application wakeup events (e.g. disable GPIO interrupt)
+ }
+
+ void my_interrupt_event(void)
+ {
+ udc_remotewakeup();
+ }
+\endcode
+ *
+ * \subsection udc_use_case_3_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required to enable remote wakeup feature:
+ * - \code // Authorizes the remote wakeup feature
+ #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_REMOTE_WAKEUP | USB_CONFIG_ATTR_..._POWERED) \endcode
+ * - \code // Define callback called when the host enables the remotewakeup feature
+ #define UDC_REMOTEWAKEUP_ENABLE() my_callback_remotewakeup_enable()
+ extern void my_callback_remotewakeup_enable(void); \endcode
+ * - \code // Define callback called when the host disables the remotewakeup feature
+ #define UDC_REMOTEWAKEUP_DISABLE() my_callback_remotewakeup_disable()
+ extern void my_callback_remotewakeup_disable(void); \endcode
+ * -# Send a remote wakeup (USB upstream):
+ * - \code udc_remotewakeup(); \endcode
+ */
+
+/**
+ * \page udc_use_case_5 Bus power application recommendations
+ *
+ * In this use case, the USB device BUS power feature is enabled.
+ * This feature requires a correct power consumption management.
+ *
+ * \section udc_use_case_5_setup Setup steps
+ * Prior to implement this use case, be sure to have already
+ * apply the UDI module "basic use case".
+ *
+ * \section udc_use_case_5_usage Usage steps
+ *
+ * \subsection udc_use_case_5_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED)
+ #define UDC_SUSPEND_EVENT() user_callback_suspend_action()
+ extern void user_callback_suspend_action(void)
+ #define UDC_RESUME_EVENT() user_callback_resume_action()
+ extern void user_callback_resume_action(void)
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ void user_callback_suspend_action(void)
+ {
+ // Disable hardware component to reduce power consumption
+ }
+ void user_callback_resume_action(void)
+ {
+ // Re-enable hardware component
+ }
+\endcode
+ *
+ * \subsection udc_use_case_5_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters:
+ * - \code // Authorizes the BUS power feature
+ #define USB_DEVICE_ATTR (USB_CONFIG_ATTR_BUS_POWERED) \endcode
+ * - \code // Define callback called when the host suspend the USB line
+ #define UDC_SUSPEND_EVENT() user_callback_suspend_action()
+ extern void user_callback_suspend_action(void); \endcode
+ * - \code // Define callback called when the host or device resume the USB line
+ #define UDC_RESUME_EVENT() user_callback_resume_action()
+ extern void user_callback_resume_action(void); \endcode
+ * -# Reduce power consumption in suspend mode (max. 2.5mA on Vbus):
+ * - \code void user_callback_suspend_action(void)
+ {
+ turn_off_components();
+ } \endcode
+ */
+
+/**
+ * \page udc_use_case_6 USB dynamic serial number
+ *
+ * In this use case, the USB serial strings is dynamic.
+ * For a static serial string refer to \ref udc_use_case_2.
+ *
+ * \section udc_use_case_6_setup Setup steps
+ * Prior to implement this use case, be sure to have already
+ * apply the UDI module "basic use case".
+ *
+ * \section udc_use_case_6_usage Usage steps
+ *
+ * \subsection udc_use_case_6_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_SERIAL_NAME
+ #define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number
+ #define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12
+ extern uint8_t serial_number[];
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
+
+ void init_build_usb_serial_number(void)
+ {
+ serial_number[0] = 'A';
+ serial_number[1] = 'B';
+ ...
+ serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C';
+ } \endcode
+ *
+ * \subsection udc_use_case_6_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required to enable a USB serial number strings dynamically:
+ * - \code #define USB_DEVICE_SERIAL_NAME // Define this empty
+ #define USB_DEVICE_GET_SERIAL_NAME_POINTER serial_number // Give serial array pointer
+ #define USB_DEVICE_GET_SERIAL_NAME_LENGTH 12 // Give size of serial array
+ extern uint8_t serial_number[]; // Declare external serial array \endcode
+ * -# Before start USB stack, initialize the serial array
+ * - \code
+ uint8_t serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH];
+
+ void init_build_usb_serial_number(void)
+ {
+ serial_number[0] = 'A';
+ serial_number[1] = 'B';
+ ...
+ serial_number[USB_DEVICE_GET_SERIAL_NAME_LENGTH-1] = 'C';
+ } \endcode
+ */
+
+
+
+#endif // _UDC_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udc_desc.h b/Marlin/src/HAL/HAL_DUE/usb/udc_desc.h
new file mode 100644
index 0000000000..88ed08a961
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udc_desc.h
@@ -0,0 +1,135 @@
+/**
+ * \file
+ *
+ * \brief Common API for USB Device Interface
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDC_DESC_H_
+#define _UDC_DESC_H_
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "udi.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup udc_group
+ * \defgroup udc_desc_group USB Device Descriptor
+ *
+ * @{
+ */
+
+/**
+ * \brief Defines the memory's location of USB descriptors
+ *
+ * By default the Descriptor is stored in RAM
+ * (UDC_DESC_STORAGE is defined empty).
+ *
+ * If you have need to free RAM space,
+ * it is possible to put descriptor in flash in following case:
+ * - USB driver authorize flash transfer (USBB on UC3 and USB on Mega)
+ * - USB Device is not high speed (UDC no need to change USB descriptors)
+ *
+ * For UC3 application used "const".
+ *
+ * For Mega application used "code".
+ */
+#define UDC_DESC_STORAGE
+ // Descriptor storage in internal RAM
+#if (defined UDC_DATA_USE_HRAM_SUPPORT)
+# if defined(__GNUC__)
+# define UDC_DATA(x) COMPILER_WORD_ALIGNED __attribute__((__section__(".data_hram0")))
+# define UDC_BSS(x) COMPILER_ALIGNED(x) __attribute__((__section__(".bss_hram0")))
+# elif defined(__ICCAVR32__)
+# define UDC_DATA(x) COMPILER_ALIGNED(x) __data32
+# define UDC_BSS(x) COMPILER_ALIGNED(x) __data32
+# endif
+#else
+# define UDC_DATA(x) COMPILER_ALIGNED(x)
+# define UDC_BSS(x) COMPILER_ALIGNED(x)
+#endif
+
+
+
+/**
+ * \brief Configuration descriptor and UDI link for one USB speed
+ */
+typedef struct {
+ //! USB configuration descriptor
+ usb_conf_desc_t UDC_DESC_STORAGE *desc;
+ //! Array of UDI API pointer
+ udi_api_t UDC_DESC_STORAGE *UDC_DESC_STORAGE * udi_apis;
+} udc_config_speed_t;
+
+
+/**
+ * \brief All information about the USB Device
+ */
+typedef struct {
+ //! USB device descriptor for low or full speed
+ usb_dev_desc_t UDC_DESC_STORAGE *confdev_lsfs;
+ //! USB configuration descriptor and UDI API pointers for low or full speed
+ udc_config_speed_t UDC_DESC_STORAGE *conf_lsfs;
+#ifdef USB_DEVICE_HS_SUPPORT
+ //! USB device descriptor for high speed
+ usb_dev_desc_t UDC_DESC_STORAGE *confdev_hs;
+ //! USB device qualifier, only use in high speed mode
+ usb_dev_qual_desc_t UDC_DESC_STORAGE *qualifier;
+ //! USB configuration descriptor and UDI API pointers for high speed
+ udc_config_speed_t UDC_DESC_STORAGE *conf_hs;
+#endif
+ usb_dev_bos_desc_t UDC_DESC_STORAGE *conf_bos;
+} udc_config_t;
+
+//! Global variables of USB Device Descriptor and UDI links
+extern UDC_DESC_STORAGE udc_config_t udc_config;
+
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _UDC_DESC_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udd.h b/Marlin/src/HAL/HAL_DUE/usb/udd.h
new file mode 100644
index 0000000000..10807f43d7
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udd.h
@@ -0,0 +1,396 @@
+/**
+ * \file
+ *
+ * \brief Common API for USB Device Drivers (UDD)
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDD_H_
+#define _UDD_H_
+
+#include "usb_protocol.h"
+#include "udc_desc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup usb_device_group
+ * \defgroup udd_group USB Device Driver (UDD)
+ *
+ * The UDD driver provides a low-level abstraction of the device
+ * controller hardware. Most events coming from the hardware such as
+ * interrupts, which may cause the UDD to call into the UDC and UDI.
+ *
+ * @{
+ */
+
+//! \brief Endpoint identifier
+typedef uint8_t udd_ep_id_t;
+
+//! \brief Endpoint transfer status
+//! Returned in parameters of callback register via udd_ep_run routine.
+typedef enum {
+ UDD_EP_TRANSFER_OK = 0,
+ UDD_EP_TRANSFER_ABORT = 1,
+} udd_ep_status_t;
+
+/**
+ * \brief Global variable to give and record information of the setup request management
+ *
+ * This global variable allows to decode and response a setup request.
+ * It can be updated by udc_process_setup() from UDC or *setup() from UDIs.
+ */
+typedef struct {
+ //! Data received in USB SETUP packet
+ //! Note: The swap of "req.wValues" from uin16_t to le16_t is done by UDD.
+ usb_setup_req_t req;
+
+ //! Point to buffer to send or fill with data following SETUP packet
+ //! This buffer must be word align for DATA IN phase (use prefix COMPILER_WORD_ALIGNED for buffer)
+ uint8_t *payload;
+
+ //! Size of buffer to send or fill, and content the number of byte transfered
+ uint16_t payload_size;
+
+ //! Callback called after reception of ZLP from setup request
+ void (*callback) (void);
+
+ //! Callback called when the buffer given (.payload) is full or empty.
+ //! This one return false to abort data transfer, or true with a new buffer in .payload.
+ bool(*over_under_run) (void);
+} udd_ctrl_request_t;
+extern udd_ctrl_request_t udd_g_ctrlreq;
+
+//! Return true if the setup request \a udd_g_ctrlreq indicates IN data transfer
+#define Udd_setup_is_in() \
+ (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
+
+//! Return true if the setup request \a udd_g_ctrlreq indicates OUT data transfer
+#define Udd_setup_is_out() \
+ (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
+
+//! Return the type of the SETUP request \a udd_g_ctrlreq. \see usb_reqtype.
+#define Udd_setup_type() \
+ (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK)
+
+//! Return the recipient of the SETUP request \a udd_g_ctrlreq. \see usb_recipient
+#define Udd_setup_recipient() \
+ (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK)
+
+/**
+ * \brief End of halt callback function type.
+ * Registered by routine udd_ep_wait_stall_clear()
+ * Callback called when endpoint stall is cleared.
+ */
+typedef void (*udd_callback_halt_cleared_t) (void);
+
+/**
+ * \brief End of transfer callback function type.
+ * Registered by routine udd_ep_run()
+ * Callback called by USB interrupt after data transfer or abort (reset,...).
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer is complete
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
+ * \param n number of data transfered
+ */
+typedef void (*udd_callback_trans_t) (udd_ep_status_t status,
+ iram_size_t nb_transfered, udd_ep_id_t ep);
+
+/**
+ * \brief Authorizes the VBUS event
+ *
+ * \return true, if the VBUS monitoring is possible.
+ */
+bool udd_include_vbus_monitoring(void);
+
+/**
+ * \brief Enables the USB Device mode
+ */
+void udd_enable(void);
+
+/**
+ * \brief Disables the USB Device mode
+ */
+void udd_disable(void);
+
+/**
+ * \brief Attach device to the bus when possible
+ *
+ * \warning If a VBus control is included in driver,
+ * then it will attach device when an acceptable Vbus
+ * level from the host is detected.
+ */
+void udd_attach(void);
+
+/**
+ * \brief Detaches the device from the bus
+ *
+ * The driver must remove pull-up on USB line D- or D+.
+ */
+void udd_detach(void);
+
+/**
+ * \brief Test whether the USB Device Controller is running at high
+ * speed or not.
+ *
+ * \return \c true if the Device is running at high speed mode, otherwise \c false.
+ */
+bool udd_is_high_speed(void);
+
+/**
+ * \brief Changes the USB address of device
+ *
+ * \param address New USB address
+ */
+void udd_set_address(uint8_t address);
+
+/**
+ * \brief Returns the USB address of device
+ *
+ * \return USB address
+ */
+uint8_t udd_getaddress(void);
+
+/**
+ * \brief Returns the current start of frame number
+ *
+ * \return current start of frame number.
+ */
+uint16_t udd_get_frame_number(void);
+
+/**
+ * \brief Returns the current micro start of frame number
+ *
+ * \return current micro start of frame number required in high speed mode.
+ */
+uint16_t udd_get_micro_frame_number(void);
+
+/*! \brief The USB driver sends a resume signal called Upstream Resume
+ */
+void udd_send_remotewakeup(void);
+
+/**
+ * \brief Load setup payload
+ *
+ * \param payload Pointer on payload
+ * \param payload_size Size of payload
+ */
+void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
+
+
+/**
+ * \name Endpoint Management
+ *
+ * The following functions allow drivers to create and remove
+ * endpoints, as well as set, clear and query their "halted" and
+ * "wedged" states.
+ */
+//@{
+
+#if (USB_DEVICE_MAX_EP != 0)
+
+/**
+ * \brief Configures and enables an endpoint
+ *
+ * \param ep Endpoint number including direction (USB_EP_DIR_IN/USB_EP_DIR_OUT).
+ * \param bmAttributes Attributes of endpoint declared in the descriptor.
+ * \param MaxEndpointSize Endpoint maximum size
+ *
+ * \return \c 1 if the endpoint is enabled, otherwise \c 0.
+ */
+bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
+ uint16_t MaxEndpointSize);
+
+/**
+ * \brief Disables an endpoint
+ *
+ * \param ep Endpoint number including direction (USB_EP_DIR_IN/USB_EP_DIR_OUT).
+ */
+void udd_ep_free(udd_ep_id_t ep);
+
+/**
+ * \brief Check if the endpoint \a ep is halted.
+ *
+ * \param ep The ID of the endpoint to check.
+ *
+ * \return \c 1 if \a ep is halted, otherwise \c 0.
+ */
+bool udd_ep_is_halted(udd_ep_id_t ep);
+
+/**
+ * \brief Set the halted state of the endpoint \a ep
+ *
+ * After calling this function, any transaction on \a ep will result
+ * in a STALL handshake being sent. Any pending transactions will be
+ * performed first, however.
+ *
+ * \param ep The ID of the endpoint to be halted
+ *
+ * \return \c 1 if \a ep is halted, otherwise \c 0.
+ */
+bool udd_ep_set_halt(udd_ep_id_t ep);
+
+/**
+ * \brief Clear the halted state of the endpoint \a ep
+ *
+ * After calling this function, any transaction on \a ep will
+ * be handled normally, i.e. a STALL handshake will not be sent, and
+ * the data toggle sequence will start at DATA0.
+ *
+ * \param ep The ID of the endpoint to be un-halted
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+bool udd_ep_clear_halt(udd_ep_id_t ep);
+
+/**
+ * \brief Registers a callback to call when endpoint halt is cleared
+ *
+ * \param ep The ID of the endpoint to use
+ * \param callback NULL or function to call when endpoint halt is cleared
+ *
+ * \warning if the endpoint is not halted then the \a callback is called immediately.
+ *
+ * \return \c 1 if the register is accepted, otherwise \c 0.
+ */
+bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
+ udd_callback_halt_cleared_t callback);
+
+/**
+ * \brief Allows to receive or send data on an endpoint
+ *
+ * The driver uses a specific DMA USB to transfer data
+ * from internal RAM to endpoint, if this one is available.
+ * When the transfer is finished or aborted (stall, reset, ...), the \a callback is called.
+ * The \a callback returns the transfer status and eventually the number of byte transfered.
+ * Note: The control endpoint is not authorized.
+ *
+ * \param ep The ID of the endpoint to use
+ * \param b_shortpacket Enabled automatic short packet
+ * \param buf Buffer on Internal RAM to send or fill.
+ * It must be align, then use COMPILER_WORD_ALIGNED.
+ * \param buf_size Buffer size to send or fill
+ * \param callback NULL or function to call at the end of transfer
+ *
+ * \warning About \a b_shortpacket, for IN endpoint it means that a short packet
+ * (or a Zero Length Packet) will be sent to the USB line to properly close the usb
+ * transfer at the end of the data transfer.
+ * For Bulk and Interrupt OUT endpoint, it will automatically stop the transfer
+ * at the end of the data transfer (received short packet).
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
+ uint8_t * buf, iram_size_t buf_size,
+ udd_callback_trans_t callback);
+/**
+ * \brief Aborts transfer on going on endpoint
+ *
+ * If a transfer is on going, then it is stopped and
+ * the callback registered is called to signal the end of transfer.
+ * Note: The control endpoint is not authorized.
+ *
+ * \param ep Endpoint to abort
+ */
+void udd_ep_abort(udd_ep_id_t ep);
+
+#endif
+
+//@}
+
+
+/**
+ * \name High speed test mode management
+ *
+ * The following functions allow the device to jump to a specific test mode required in high speed mode.
+ */
+//@{
+void udd_test_mode_j(void);
+void udd_test_mode_k(void);
+void udd_test_mode_se0_nak(void);
+void udd_test_mode_packet(void);
+//@}
+
+
+/**
+ * \name UDC callbacks to provide for UDD
+ *
+ * The following callbacks are used by UDD.
+ */
+//@{
+
+/**
+ * \brief Decodes and manages a setup request
+ *
+ * The driver call it when a SETUP packet is received.
+ * The \c udd_g_ctrlreq contains the data of SETUP packet.
+ * If this callback accepts the setup request then it must
+ * return \c 1 and eventually update \c udd_g_ctrlreq to send or receive data.
+ *
+ * \return \c 1 if the request is accepted, otherwise \c 0.
+ */
+extern bool udc_process_setup(void);
+
+/**
+ * \brief Reset the UDC
+ *
+ * The UDC must reset all configuration.
+ */
+extern void udc_reset(void);
+
+/**
+ * \brief To signal that a SOF is occurred
+ *
+ * The UDC must send the signal to all UDIs enabled
+ */
+extern void udc_sof_notify(void);
+
+//@}
+
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _UDD_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi.h b/Marlin/src/HAL/HAL_DUE/usb/udi.h
new file mode 100644
index 0000000000..1fc7ae5d01
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi.h
@@ -0,0 +1,133 @@
+/**
+ * \file
+ *
+ * \brief Common API for USB Device Interface
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDI_H_
+#define _UDI_H_
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \ingroup usb_device_group
+ * \defgroup udi_group USB Device Interface (UDI)
+ * The UDI provides a common API for all classes,
+ * and this is used by UDC for the main control of USB Device interface.
+ * @{
+ */
+
+/**
+ * \brief UDI API.
+ *
+ * The callbacks within this structure are called only by
+ * USB Device Controller (UDC)
+ *
+ * The udc_get_interface_desc() can be use by UDI to know the interface descriptor
+ * selected by UDC.
+ */
+typedef struct {
+ /**
+ * \brief Enable the interface.
+ *
+ * This function is called when the host selects a configuration
+ * to which this interface belongs through a Set Configuration
+ * request, and when the host selects an alternate setting of
+ * this interface through a Set Interface request.
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+ bool(*enable) (void);
+
+ /**
+ * \brief Disable the interface.
+ *
+ * This function is called when this interface is currently
+ * active, and
+ * - the host selects any configuration through a Set
+ * Configuration request, or
+ * - the host issues a USB reset, or
+ * - the device is detached from the host (i.e. Vbus is no
+ * longer present)
+ */
+ void (*disable) (void);
+
+ /**
+ * \brief Handle a control request directed at an interface.
+ *
+ * This function is called when this interface is currently
+ * active and the host sends a SETUP request
+ * with this interface as the recipient.
+ *
+ * Use udd_g_ctrlreq to decode and response to SETUP request.
+ *
+ * \return \c 1 if this interface supports the SETUP request, otherwise \c 0.
+ */
+ bool(*setup) (void);
+
+ /**
+ * \brief Returns the current setting of the selected interface.
+ *
+ * This function is called when UDC when know alternate setting of selected interface.
+ *
+ * \return alternate setting of selected interface
+ */
+ uint8_t(*getsetting) (void);
+
+ /**
+ * \brief To signal that a SOF is occurred
+ */
+ void(*sof_notify) (void);
+} udi_api_t;
+
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _UDI_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c
new file mode 100644
index 0000000000..7844c08920
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.c
@@ -0,0 +1,1155 @@
+/**
+ * \file
+ *
+ * \brief USB Device Communication Device Class (CDC) interface.
+ *
+ * Copyright (c) 2009-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "usb_protocol_cdc.h"
+#include "udd.h"
+#include "udc.h"
+#include "udi_cdc.h"
+#include
+
+#ifdef UDI_CDC_LOW_RATE
+# ifdef USB_DEVICE_HS_SUPPORT
+# define UDI_CDC_TX_BUFFERS (UDI_CDC_DATA_EPS_HS_SIZE)
+# define UDI_CDC_RX_BUFFERS (UDI_CDC_DATA_EPS_HS_SIZE)
+# else
+# define UDI_CDC_TX_BUFFERS (UDI_CDC_DATA_EPS_FS_SIZE)
+# define UDI_CDC_RX_BUFFERS (UDI_CDC_DATA_EPS_FS_SIZE)
+# endif
+#else
+# ifdef USB_DEVICE_HS_SUPPORT
+# define UDI_CDC_TX_BUFFERS (UDI_CDC_DATA_EPS_HS_SIZE)
+# define UDI_CDC_RX_BUFFERS (UDI_CDC_DATA_EPS_HS_SIZE)
+# else
+# define UDI_CDC_TX_BUFFERS (5*UDI_CDC_DATA_EPS_FS_SIZE)
+# define UDI_CDC_RX_BUFFERS (5*UDI_CDC_DATA_EPS_FS_SIZE)
+# endif
+#endif
+
+#ifndef UDI_CDC_TX_EMPTY_NOTIFY
+# define UDI_CDC_TX_EMPTY_NOTIFY(port)
+#endif
+
+/**
+ * \ingroup udi_cdc_group
+ * \defgroup udi_cdc_group_udc Interface with USB Device Core (UDC)
+ *
+ * Structures and functions required by UDC.
+ *
+ * @{
+ */
+bool udi_cdc_comm_enable(void);
+void udi_cdc_comm_disable(void);
+bool udi_cdc_comm_setup(void);
+bool udi_cdc_data_enable(void);
+void udi_cdc_data_disable(void);
+bool udi_cdc_data_setup(void);
+uint8_t udi_cdc_getsetting(void);
+void udi_cdc_data_sof_notify(void);
+UDC_DESC_STORAGE udi_api_t udi_api_cdc_comm = {
+ .enable = udi_cdc_comm_enable,
+ .disable = udi_cdc_comm_disable,
+ .setup = udi_cdc_comm_setup,
+ .getsetting = udi_cdc_getsetting,
+};
+UDC_DESC_STORAGE udi_api_t udi_api_cdc_data = {
+ .enable = udi_cdc_data_enable,
+ .disable = udi_cdc_data_disable,
+ .setup = udi_cdc_data_setup,
+ .getsetting = udi_cdc_getsetting,
+ .sof_notify = udi_cdc_data_sof_notify,
+};
+//@}
+
+/**
+ * \ingroup udi_cdc_group
+ * \defgroup udi_cdc_group_internal Implementation of UDI CDC
+ *
+ * Class internal implementation
+ * @{
+ */
+
+/**
+ * \name Internal routines
+ */
+//@{
+
+/**
+ * \name Routines to control serial line
+ */
+//@{
+
+/**
+ * \brief Returns the port number corresponding at current setup request
+ *
+ * \return port number
+ */
+static uint8_t udi_cdc_setup_to_port(void);
+
+/**
+ * \brief Sends line coding to application
+ *
+ * Called after SETUP request when line coding data is received.
+ */
+static void udi_cdc_line_coding_received(void);
+
+/**
+ * \brief Records new state
+ *
+ * \param port Communication port number to manage
+ * \param b_set State is enabled if true, else disabled
+ * \param bit_mask Field to process (see CDC_SERIAL_STATE_ defines)
+ */
+static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask);
+
+/**
+ * \brief Check and eventually notify the USB host of new state
+ *
+ * \param port Communication port number to manage
+ * \param ep Port communication endpoint
+ */
+static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep);
+
+/**
+ * \brief Ack sent of serial state message
+ * Callback called after serial state message sent
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer finished
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
+ * \param n number of data transfered
+ */
+static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep);
+
+//@}
+
+/**
+ * \name Routines to process data transfer
+ */
+//@{
+
+/**
+ * \brief Enable the reception of data from the USB host
+ *
+ * The value udi_cdc_rx_trans_sel indicate the RX buffer to fill.
+ *
+ * \param port Communication port number to manage
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+static bool udi_cdc_rx_start(uint8_t port);
+
+/**
+ * \brief Update rx buffer management with a new data
+ * Callback called after data reception on USB line
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer finish
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
+ * \param n number of data received
+ */
+static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep);
+
+/**
+ * \brief Ack sent of tx buffer
+ * Callback called after data transfer on USB line
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer finished
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
+ * \param n number of data transfered
+ */
+static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep);
+
+/**
+ * \brief Send buffer on line or wait a SOF event
+ *
+ * \param port Communication port number to manage
+ */
+static void udi_cdc_tx_send(uint8_t port);
+
+//@}
+
+//@}
+
+/**
+ * \name Information about configuration of communication line
+ */
+//@{
+COMPILER_WORD_ALIGNED
+ static usb_cdc_line_coding_t udi_cdc_line_coding[UDI_CDC_PORT_NB];
+static bool udi_cdc_serial_state_msg_ongoing[UDI_CDC_PORT_NB];
+static volatile le16_t udi_cdc_state[UDI_CDC_PORT_NB];
+COMPILER_WORD_ALIGNED static usb_cdc_notify_serial_state_t uid_cdc_state_msg[UDI_CDC_PORT_NB];
+
+//! Status of CDC COMM interfaces
+static volatile uint8_t udi_cdc_nb_comm_enabled = 0;
+//@}
+
+/**
+ * \name Variables to manage RX/TX transfer requests
+ * Two buffers for each sense are used to optimize the speed.
+ */
+//@{
+
+//! Status of CDC DATA interfaces
+static volatile uint8_t udi_cdc_nb_data_enabled = 0;
+static volatile bool udi_cdc_data_running = false;
+//! Buffer to receive data
+COMPILER_WORD_ALIGNED static uint8_t udi_cdc_rx_buf[UDI_CDC_PORT_NB][2][UDI_CDC_RX_BUFFERS];
+//! Data available in RX buffers
+static volatile uint16_t udi_cdc_rx_buf_nb[UDI_CDC_PORT_NB][2];
+//! Give the current RX buffer used (rx0 if 0, rx1 if 1)
+static volatile uint8_t udi_cdc_rx_buf_sel[UDI_CDC_PORT_NB];
+//! Read position in current RX buffer
+static volatile uint16_t udi_cdc_rx_pos[UDI_CDC_PORT_NB];
+//! Signal a transfer on-going
+static volatile bool udi_cdc_rx_trans_ongoing[UDI_CDC_PORT_NB];
+
+//! Define a transfer halted
+#define UDI_CDC_TRANS_HALTED 2
+
+//! Buffer to send data
+COMPILER_WORD_ALIGNED static uint8_t udi_cdc_tx_buf[UDI_CDC_PORT_NB][2][UDI_CDC_TX_BUFFERS];
+//! Data available in TX buffers
+static uint16_t udi_cdc_tx_buf_nb[UDI_CDC_PORT_NB][2];
+//! Give current TX buffer used (tx0 if 0, tx1 if 1)
+static volatile uint8_t udi_cdc_tx_buf_sel[UDI_CDC_PORT_NB];
+//! Value of SOF during last TX transfer
+static uint16_t udi_cdc_tx_sof_num[UDI_CDC_PORT_NB];
+//! Signal a transfer on-going
+static volatile bool udi_cdc_tx_trans_ongoing[UDI_CDC_PORT_NB];
+//! Signal that both buffer content data to send
+static volatile bool udi_cdc_tx_both_buf_to_send[UDI_CDC_PORT_NB];
+
+//@}
+
+bool udi_cdc_comm_enable(void)
+{
+ uint8_t port;
+ uint8_t iface_comm_num;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+ udi_cdc_nb_comm_enabled = 0;
+#else
+ if (udi_cdc_nb_comm_enabled > UDI_CDC_PORT_NB) {
+ udi_cdc_nb_comm_enabled = 0;
+ }
+ port = udi_cdc_nb_comm_enabled;
+#endif
+
+ // Initialize control signal management
+ udi_cdc_state[port] = CPU_TO_LE16(0);
+
+ uid_cdc_state_msg[port].header.bmRequestType =
+ USB_REQ_DIR_IN | USB_REQ_TYPE_CLASS |
+ USB_REQ_RECIP_INTERFACE;
+ uid_cdc_state_msg[port].header.bNotification = USB_REQ_CDC_NOTIFY_SERIAL_STATE;
+ uid_cdc_state_msg[port].header.wValue = LE16(0);
+
+ switch (port) {
+#define UDI_CDC_PORT_TO_IFACE_COMM(index, unused) \
+ case index: \
+ iface_comm_num = UDI_CDC_COMM_IFACE_NUMBER_##index; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_PORT_TO_IFACE_COMM, ~)
+#undef UDI_CDC_PORT_TO_IFACE_COMM
+ default:
+ iface_comm_num = UDI_CDC_COMM_IFACE_NUMBER_0;
+ break;
+ }
+
+ uid_cdc_state_msg[port].header.wIndex = LE16(iface_comm_num);
+ uid_cdc_state_msg[port].header.wLength = LE16(2);
+ uid_cdc_state_msg[port].value = CPU_TO_LE16(0);
+
+ udi_cdc_line_coding[port].dwDTERate = CPU_TO_LE32(UDI_CDC_DEFAULT_RATE);
+ udi_cdc_line_coding[port].bCharFormat = UDI_CDC_DEFAULT_STOPBITS;
+ udi_cdc_line_coding[port].bParityType = UDI_CDC_DEFAULT_PARITY;
+ udi_cdc_line_coding[port].bDataBits = UDI_CDC_DEFAULT_DATABITS;
+ // Call application callback
+ // to initialize memories or indicate that interface is enabled
+ UDI_CDC_SET_CODING_EXT(port,(&udi_cdc_line_coding[port]));
+ if (!UDI_CDC_ENABLE_EXT(port)) {
+ return false;
+ }
+ udi_cdc_nb_comm_enabled++;
+ return true;
+}
+
+bool udi_cdc_data_enable(void)
+{
+ uint8_t port;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+ udi_cdc_nb_data_enabled = 0;
+#else
+ if (udi_cdc_nb_data_enabled > UDI_CDC_PORT_NB) {
+ udi_cdc_nb_data_enabled = 0;
+ }
+ port = udi_cdc_nb_data_enabled;
+#endif
+
+ // Initialize TX management
+ udi_cdc_tx_trans_ongoing[port] = false;
+ udi_cdc_tx_both_buf_to_send[port] = false;
+ udi_cdc_tx_buf_sel[port] = 0;
+ udi_cdc_tx_buf_nb[port][0] = 0;
+ udi_cdc_tx_buf_nb[port][1] = 0;
+ udi_cdc_tx_sof_num[port] = 0;
+ udi_cdc_tx_send(port);
+
+ // Initialize RX management
+ udi_cdc_rx_trans_ongoing[port] = false;
+ udi_cdc_rx_buf_sel[port] = 0;
+ udi_cdc_rx_buf_nb[port][0] = 0;
+ udi_cdc_rx_buf_nb[port][1] = 0;
+ udi_cdc_rx_pos[port] = 0;
+ if (!udi_cdc_rx_start(port)) {
+ return false;
+ }
+ udi_cdc_nb_data_enabled++;
+ if (udi_cdc_nb_data_enabled == UDI_CDC_PORT_NB) {
+ udi_cdc_data_running = true;
+ }
+ return true;
+}
+
+void udi_cdc_comm_disable(void)
+{
+ Assert(udi_cdc_nb_comm_enabled != 0);
+ udi_cdc_nb_comm_enabled--;
+}
+
+void udi_cdc_data_disable(void)
+{
+ uint8_t port;
+
+ Assert(udi_cdc_nb_data_enabled != 0);
+ udi_cdc_nb_data_enabled--;
+ port = udi_cdc_nb_data_enabled;
+ UDI_CDC_DISABLE_EXT(port);
+ udi_cdc_data_running = false;
+}
+
+bool udi_cdc_comm_setup(void)
+{
+ uint8_t port = udi_cdc_setup_to_port();
+
+ if (Udd_setup_is_in()) {
+ // GET Interface Requests
+ if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
+ // Requests Class Interface Get
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_CDC_GET_LINE_CODING:
+ // Get configuration of CDC line
+ if (sizeof(usb_cdc_line_coding_t) !=
+ udd_g_ctrlreq.req.wLength)
+ return false; // Error for USB host
+ udd_g_ctrlreq.payload =
+ (uint8_t *) &
+ udi_cdc_line_coding[port];
+ udd_g_ctrlreq.payload_size =
+ sizeof(usb_cdc_line_coding_t);
+ return true;
+ }
+ }
+ }
+ if (Udd_setup_is_out()) {
+ // SET Interface Requests
+ if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
+ // Requests Class Interface Set
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_CDC_SET_LINE_CODING:
+ // Change configuration of CDC line
+ if (sizeof(usb_cdc_line_coding_t) !=
+ udd_g_ctrlreq.req.wLength)
+ return false; // Error for USB host
+ udd_g_ctrlreq.callback =
+ udi_cdc_line_coding_received;
+ udd_g_ctrlreq.payload =
+ (uint8_t *) &
+ udi_cdc_line_coding[port];
+ udd_g_ctrlreq.payload_size =
+ sizeof(usb_cdc_line_coding_t);
+ return true;
+ case USB_REQ_CDC_SET_CONTROL_LINE_STATE:
+ // According cdc spec 1.1 chapter 6.2.14
+ UDI_CDC_SET_DTR_EXT(port, (0 !=
+ (udd_g_ctrlreq.req.wValue
+ & CDC_CTRL_SIGNAL_DTE_PRESENT)));
+ UDI_CDC_SET_RTS_EXT(port, (0 !=
+ (udd_g_ctrlreq.req.wValue
+ & CDC_CTRL_SIGNAL_ACTIVATE_CARRIER)));
+ return true;
+ }
+ }
+ }
+ return false; // request Not supported
+}
+
+bool udi_cdc_data_setup(void)
+{
+ return false; // request Not supported
+}
+
+uint8_t udi_cdc_getsetting(void)
+{
+ return 0; // CDC don't have multiple alternate setting
+}
+
+void udi_cdc_data_sof_notify(void)
+{
+ static uint8_t port_notify = 0;
+
+ // A call of udi_cdc_data_sof_notify() is done for each port
+ udi_cdc_tx_send(port_notify);
+#if UDI_CDC_PORT_NB != 1 // To optimize code
+ port_notify++;
+ if (port_notify >= UDI_CDC_PORT_NB) {
+ port_notify = 0;
+ }
+#endif
+}
+
+
+//-------------------------------------------------
+//------- Internal routines to control serial line
+
+static uint8_t udi_cdc_setup_to_port(void)
+{
+ uint8_t port;
+
+ switch (udd_g_ctrlreq.req.wIndex & 0xFF) {
+#define UDI_CDC_IFACE_COMM_TO_PORT(iface, unused) \
+ case UDI_CDC_COMM_IFACE_NUMBER_##iface: \
+ port = iface; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_IFACE_COMM_TO_PORT, ~)
+#undef UDI_CDC_IFACE_COMM_TO_PORT
+ default:
+ port = 0;
+ break;
+ }
+ return port;
+}
+
+static void udi_cdc_line_coding_received(void)
+{
+ uint8_t port = udi_cdc_setup_to_port();
+ UNUSED(port);
+
+ UDI_CDC_SET_CODING_EXT(port, (&udi_cdc_line_coding[port]));
+}
+
+static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask)
+{
+ irqflags_t flags;
+ udd_ep_id_t ep_comm;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ // Update state
+ flags = cpu_irq_save(); // Protect udi_cdc_state
+ if (b_set) {
+ udi_cdc_state[port] |= bit_mask;
+ } else {
+ udi_cdc_state[port] &= ~(unsigned)bit_mask;
+ }
+ cpu_irq_restore(flags);
+
+ // Send it if possible and state changed
+ switch (port) {
+#define UDI_CDC_PORT_TO_COMM_EP(index, unused) \
+ case index: \
+ ep_comm = UDI_CDC_COMM_EP_##index; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_PORT_TO_COMM_EP, ~)
+#undef UDI_CDC_PORT_TO_COMM_EP
+ default:
+ ep_comm = UDI_CDC_COMM_EP_0;
+ break;
+ }
+ udi_cdc_ctrl_state_notify(port, ep_comm);
+}
+
+
+static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
+{
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ // Send it if possible and state changed
+ if ((!udi_cdc_serial_state_msg_ongoing[port])
+ && (udi_cdc_state[port] != uid_cdc_state_msg[port].value)) {
+ // Fill notification message
+ uid_cdc_state_msg[port].value = udi_cdc_state[port];
+ // Send notification message
+ udi_cdc_serial_state_msg_ongoing[port] =
+ udd_ep_run(ep,
+ false,
+ (uint8_t *) & uid_cdc_state_msg[port],
+ sizeof(uid_cdc_state_msg[0]),
+ udi_cdc_serial_state_msg_sent);
+ }
+}
+
+
+static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
+{
+ uint8_t port;
+ UNUSED(n);
+ UNUSED(status);
+
+ switch (ep) {
+#define UDI_CDC_GET_PORT_FROM_COMM_EP(iface, unused) \
+ case UDI_CDC_COMM_EP_##iface: \
+ port = iface; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_GET_PORT_FROM_COMM_EP, ~)
+#undef UDI_CDC_GET_PORT_FROM_COMM_EP
+ default:
+ port = 0;
+ break;
+ }
+
+ udi_cdc_serial_state_msg_ongoing[port] = false;
+
+ // For the irregular signals like break, the incoming ring signal,
+ // or the overrun error state, this will reset their values to zero
+ // and again will not send another notification until their state changes.
+ udi_cdc_state[port] &= ~(CDC_SERIAL_STATE_BREAK |
+ CDC_SERIAL_STATE_RING |
+ CDC_SERIAL_STATE_FRAMING |
+ CDC_SERIAL_STATE_PARITY | CDC_SERIAL_STATE_OVERRUN);
+ uid_cdc_state_msg[port].value &= ~(CDC_SERIAL_STATE_BREAK |
+ CDC_SERIAL_STATE_RING |
+ CDC_SERIAL_STATE_FRAMING |
+ CDC_SERIAL_STATE_PARITY | CDC_SERIAL_STATE_OVERRUN);
+ // Send it if possible and state changed
+ udi_cdc_ctrl_state_notify(port, ep);
+}
+
+
+//-------------------------------------------------
+//------- Internal routines to process data transfer
+
+
+static bool udi_cdc_rx_start(uint8_t port)
+{
+ irqflags_t flags;
+ uint8_t buf_sel_trans;
+ udd_ep_id_t ep;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ flags = cpu_irq_save();
+ buf_sel_trans = udi_cdc_rx_buf_sel[port];
+ if (udi_cdc_rx_trans_ongoing[port] ||
+ (udi_cdc_rx_pos[port] < udi_cdc_rx_buf_nb[port][buf_sel_trans])) {
+ // Transfer already on-going or current buffer no empty
+ cpu_irq_restore(flags);
+ return false;
+ }
+
+ // Change current buffer
+ udi_cdc_rx_pos[port] = 0;
+ udi_cdc_rx_buf_sel[port] = (buf_sel_trans==0)?1:0;
+
+ // Start transfer on RX
+ udi_cdc_rx_trans_ongoing[port] = true;
+ cpu_irq_restore(flags);
+
+ if (udi_cdc_multi_is_rx_ready(port)) {
+ UDI_CDC_RX_NOTIFY(port);
+ }
+ // Send the buffer with enable of short packet
+ switch (port) {
+#define UDI_CDC_PORT_TO_DATA_EP_OUT(index, unused) \
+ case index: \
+ ep = UDI_CDC_DATA_EP_OUT_##index; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_PORT_TO_DATA_EP_OUT, ~)
+#undef UDI_CDC_PORT_TO_DATA_EP_OUT
+ default:
+ ep = UDI_CDC_DATA_EP_OUT_0;
+ break;
+ }
+ return udd_ep_run(ep,
+ true,
+ udi_cdc_rx_buf[port][buf_sel_trans],
+ UDI_CDC_RX_BUFFERS,
+ udi_cdc_data_received);
+}
+
+
+static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
+{
+ uint8_t buf_sel_trans;
+ uint8_t port;
+
+ switch (ep) {
+#define UDI_CDC_DATA_EP_OUT_TO_PORT(index, unused) \
+ case UDI_CDC_DATA_EP_OUT_##index: \
+ port = index; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_DATA_EP_OUT_TO_PORT, ~)
+#undef UDI_CDC_DATA_EP_OUT_TO_PORT
+ default:
+ port = 0;
+ break;
+ }
+
+ if (UDD_EP_TRANSFER_OK != status) {
+ // Abort reception
+ return;
+ }
+ buf_sel_trans = (udi_cdc_rx_buf_sel[port]==0)?1:0;
+ if (!n) {
+ udd_ep_run( ep,
+ true,
+ udi_cdc_rx_buf[port][buf_sel_trans],
+ UDI_CDC_RX_BUFFERS,
+ udi_cdc_data_received);
+ return;
+ }
+ udi_cdc_rx_buf_nb[port][buf_sel_trans] = n;
+ udi_cdc_rx_trans_ongoing[port] = false;
+ udi_cdc_rx_start(port);
+}
+
+
+static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
+{
+ uint8_t port;
+ UNUSED(n);
+
+ switch (ep) {
+#define UDI_CDC_DATA_EP_IN_TO_PORT(index, unused) \
+ case UDI_CDC_DATA_EP_IN_##index: \
+ port = index; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_DATA_EP_IN_TO_PORT, ~)
+#undef UDI_CDC_DATA_EP_IN_TO_PORT
+ default:
+ port = 0;
+ break;
+ }
+
+ if (UDD_EP_TRANSFER_OK != status) {
+ // Abort transfer
+ return;
+ }
+ udi_cdc_tx_buf_nb[port][(udi_cdc_tx_buf_sel[port]==0)?1:0] = 0;
+ udi_cdc_tx_both_buf_to_send[port] = false;
+ udi_cdc_tx_trans_ongoing[port] = false;
+
+ if (n != 0) {
+ UDI_CDC_TX_EMPTY_NOTIFY(port);
+ }
+ udi_cdc_tx_send(port);
+}
+
+
+static void udi_cdc_tx_send(uint8_t port)
+{
+ irqflags_t flags;
+ uint8_t buf_sel_trans;
+ bool b_short_packet;
+ udd_ep_id_t ep;
+ static uint16_t sof_zlp_counter = 0;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ if (udi_cdc_tx_trans_ongoing[port]) {
+ return; // Already on going or wait next SOF to send next data
+ }
+ if (udd_is_high_speed()) {
+ if (udi_cdc_tx_sof_num[port] == udd_get_micro_frame_number()) {
+ return; // Wait next SOF to send next data
+ }
+ }else{
+ if (udi_cdc_tx_sof_num[port] == udd_get_frame_number()) {
+ return; // Wait next SOF to send next data
+ }
+ }
+
+ flags = cpu_irq_save(); // to protect udi_cdc_tx_buf_sel
+ buf_sel_trans = udi_cdc_tx_buf_sel[port];
+ if (udi_cdc_tx_buf_nb[port][buf_sel_trans] == 0) {
+ sof_zlp_counter++;
+ if (((!udd_is_high_speed()) && (sof_zlp_counter < 100))
+ || (udd_is_high_speed() && (sof_zlp_counter < 800))) {
+ cpu_irq_restore(flags);
+ return;
+ }
+ }
+ sof_zlp_counter = 0;
+
+ if (!udi_cdc_tx_both_buf_to_send[port]) {
+ // Send current Buffer
+ // and switch the current buffer
+ udi_cdc_tx_buf_sel[port] = (buf_sel_trans==0)?1:0;
+ }else{
+ // Send the other Buffer
+ // and no switch the current buffer
+ buf_sel_trans = (buf_sel_trans==0)?1:0;
+ }
+ udi_cdc_tx_trans_ongoing[port] = true;
+ cpu_irq_restore(flags);
+
+ b_short_packet = (udi_cdc_tx_buf_nb[port][buf_sel_trans] != UDI_CDC_TX_BUFFERS);
+ if (b_short_packet) {
+ if (udd_is_high_speed()) {
+ udi_cdc_tx_sof_num[port] = udd_get_micro_frame_number();
+ }else{
+ udi_cdc_tx_sof_num[port] = udd_get_frame_number();
+ }
+ }else{
+ udi_cdc_tx_sof_num[port] = 0; // Force next transfer without wait SOF
+ }
+
+ // Send the buffer with enable of short packet
+ switch (port) {
+#define UDI_CDC_PORT_TO_DATA_EP_IN(index, unused) \
+ case index: \
+ ep = UDI_CDC_DATA_EP_IN_##index; \
+ break;
+ MREPEAT(UDI_CDC_PORT_NB, UDI_CDC_PORT_TO_DATA_EP_IN, ~)
+#undef UDI_CDC_PORT_TO_DATA_EP_IN
+ default:
+ ep = UDI_CDC_DATA_EP_IN_0;
+ break;
+ }
+ udd_ep_run( ep,
+ b_short_packet,
+ udi_cdc_tx_buf[port][buf_sel_trans],
+ udi_cdc_tx_buf_nb[port][buf_sel_trans],
+ udi_cdc_data_sent);
+}
+
+
+//---------------------------------------------
+//------- Application interface
+
+
+//------- Application interface
+
+void udi_cdc_ctrl_signal_dcd(bool b_set)
+{
+ udi_cdc_ctrl_state_change(0, b_set, CDC_SERIAL_STATE_DCD);
+}
+
+void udi_cdc_ctrl_signal_dsr(bool b_set)
+{
+ udi_cdc_ctrl_state_change(0, b_set, CDC_SERIAL_STATE_DSR);
+}
+
+void udi_cdc_signal_framing_error(void)
+{
+ udi_cdc_ctrl_state_change(0, true, CDC_SERIAL_STATE_FRAMING);
+}
+
+void udi_cdc_signal_parity_error(void)
+{
+ udi_cdc_ctrl_state_change(0, true, CDC_SERIAL_STATE_PARITY);
+}
+
+void udi_cdc_signal_overrun(void)
+{
+ udi_cdc_ctrl_state_change(0, true, CDC_SERIAL_STATE_OVERRUN);
+}
+
+void udi_cdc_multi_ctrl_signal_dcd(uint8_t port, bool b_set)
+{
+ udi_cdc_ctrl_state_change(port, b_set, CDC_SERIAL_STATE_DCD);
+}
+
+void udi_cdc_multi_ctrl_signal_dsr(uint8_t port, bool b_set)
+{
+ udi_cdc_ctrl_state_change(port, b_set, CDC_SERIAL_STATE_DSR);
+}
+
+void udi_cdc_multi_signal_framing_error(uint8_t port)
+{
+ udi_cdc_ctrl_state_change(port, true, CDC_SERIAL_STATE_FRAMING);
+}
+
+void udi_cdc_multi_signal_parity_error(uint8_t port)
+{
+ udi_cdc_ctrl_state_change(port, true, CDC_SERIAL_STATE_PARITY);
+}
+
+void udi_cdc_multi_signal_overrun(uint8_t port)
+{
+ udi_cdc_ctrl_state_change(port, true, CDC_SERIAL_STATE_OVERRUN);
+}
+
+iram_size_t udi_cdc_multi_get_nb_received_data(uint8_t port)
+{
+ irqflags_t flags;
+ uint16_t pos;
+ iram_size_t nb_received;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+ flags = cpu_irq_save();
+ pos = udi_cdc_rx_pos[port];
+ nb_received = udi_cdc_rx_buf_nb[port][udi_cdc_rx_buf_sel[port]] - pos;
+ cpu_irq_restore(flags);
+ return nb_received;
+}
+
+iram_size_t udi_cdc_get_nb_received_data(void)
+{
+ return udi_cdc_multi_get_nb_received_data(0);
+}
+
+bool udi_cdc_multi_is_rx_ready(uint8_t port)
+{
+ return (udi_cdc_multi_get_nb_received_data(port) > 0);
+}
+
+bool udi_cdc_is_rx_ready(void)
+{
+ return udi_cdc_multi_is_rx_ready(0);
+}
+
+int udi_cdc_multi_getc(uint8_t port)
+{
+ irqflags_t flags;
+ int rx_data = 0;
+ bool b_databit_9;
+ uint16_t pos;
+ uint8_t buf_sel;
+ bool again;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ b_databit_9 = (9 == udi_cdc_line_coding[port].bDataBits);
+
+udi_cdc_getc_process_one_byte:
+ // Check available data
+ flags = cpu_irq_save();
+ pos = udi_cdc_rx_pos[port];
+ buf_sel = udi_cdc_rx_buf_sel[port];
+ again = pos >= udi_cdc_rx_buf_nb[port][buf_sel];
+ cpu_irq_restore(flags);
+ while (again) {
+ if (!udi_cdc_data_running) {
+ return 0;
+ }
+ goto udi_cdc_getc_process_one_byte;
+ }
+
+ // Read data
+ rx_data |= udi_cdc_rx_buf[port][buf_sel][pos];
+ udi_cdc_rx_pos[port] = pos+1;
+
+ udi_cdc_rx_start(port);
+
+ if (b_databit_9) {
+ // Receive MSB
+ b_databit_9 = false;
+ rx_data = rx_data << 8;
+ goto udi_cdc_getc_process_one_byte;
+ }
+ return rx_data;
+}
+
+int udi_cdc_getc(void)
+{
+ return udi_cdc_multi_getc(0);
+}
+
+iram_size_t udi_cdc_multi_read_buf(uint8_t port, void* buf, iram_size_t size)
+{
+ irqflags_t flags;
+ uint8_t *ptr_buf = (uint8_t *)buf;
+ iram_size_t copy_nb;
+ uint16_t pos;
+ uint8_t buf_sel;
+ bool again;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+udi_cdc_read_buf_loop_wait:
+ // Check available data
+ flags = cpu_irq_save();
+ pos = udi_cdc_rx_pos[port];
+ buf_sel = udi_cdc_rx_buf_sel[port];
+ again = pos >= udi_cdc_rx_buf_nb[port][buf_sel];
+ cpu_irq_restore(flags);
+ while (again) {
+ if (!udi_cdc_data_running) {
+ return size;
+ }
+ goto udi_cdc_read_buf_loop_wait;
+ }
+
+ // Read data
+ copy_nb = udi_cdc_rx_buf_nb[port][buf_sel] - pos;
+ if (copy_nb>size) {
+ copy_nb = size;
+ }
+ memcpy(ptr_buf, &udi_cdc_rx_buf[port][buf_sel][pos], copy_nb);
+ udi_cdc_rx_pos[port] += copy_nb;
+ ptr_buf += copy_nb;
+ size -= copy_nb;
+ udi_cdc_rx_start(port);
+
+ if (size) {
+ goto udi_cdc_read_buf_loop_wait;
+ }
+ return 0;
+}
+
+static iram_size_t udi_cdc_multi_read_no_polling(uint8_t port, void* buf, iram_size_t size)
+{
+ uint8_t *ptr_buf = (uint8_t *)buf;
+ iram_size_t nb_avail_data;
+ uint16_t pos;
+ uint8_t buf_sel;
+ irqflags_t flags;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ //Data interface not started... exit
+ if (!udi_cdc_data_running) {
+ return 0;
+ }
+
+ //Get number of available data
+ // Check available data
+ flags = cpu_irq_save(); // to protect udi_cdc_rx_pos & udi_cdc_rx_buf_sel
+ pos = udi_cdc_rx_pos[port];
+ buf_sel = udi_cdc_rx_buf_sel[port];
+ nb_avail_data = udi_cdc_rx_buf_nb[port][buf_sel] - pos;
+ cpu_irq_restore(flags);
+ //If the buffer contains less than the requested number of data,
+ //adjust read size
+ if(nb_avail_data0) {
+ memcpy(ptr_buf, &udi_cdc_rx_buf[port][buf_sel][pos], size);
+ flags = cpu_irq_save(); // to protect udi_cdc_rx_pos
+ udi_cdc_rx_pos[port] += size;
+ cpu_irq_restore(flags);
+
+ ptr_buf += size;
+ udi_cdc_rx_start(port);
+ }
+ return(nb_avail_data);
+}
+
+iram_size_t udi_cdc_read_no_polling(void* buf, iram_size_t size)
+{
+ return udi_cdc_multi_read_no_polling(0, buf, size);
+}
+
+iram_size_t udi_cdc_read_buf(void* buf, iram_size_t size)
+{
+ return udi_cdc_multi_read_buf(0, buf, size);
+}
+
+iram_size_t udi_cdc_multi_get_free_tx_buffer(uint8_t port)
+{
+ irqflags_t flags;
+ iram_size_t buf_sel_nb, retval;
+ uint8_t buf_sel;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ flags = cpu_irq_save();
+ buf_sel = udi_cdc_tx_buf_sel[port];
+ buf_sel_nb = udi_cdc_tx_buf_nb[port][buf_sel];
+ if (buf_sel_nb == UDI_CDC_TX_BUFFERS) {
+ if ((!udi_cdc_tx_trans_ongoing[port])
+ && (!udi_cdc_tx_both_buf_to_send[port])) {
+ /* One buffer is full, but the other buffer is not used.
+ * (not used = transfer on-going)
+ * then move to the other buffer to store data */
+ udi_cdc_tx_both_buf_to_send[port] = true;
+ udi_cdc_tx_buf_sel[port] = (buf_sel == 0)? 1 : 0;
+ buf_sel_nb = 0;
+ }
+ }
+ retval = UDI_CDC_TX_BUFFERS - buf_sel_nb;
+ cpu_irq_restore(flags);
+ return retval;
+}
+
+iram_size_t udi_cdc_get_free_tx_buffer(void)
+{
+ return udi_cdc_multi_get_free_tx_buffer(0);
+}
+
+bool udi_cdc_multi_is_tx_ready(uint8_t port)
+{
+ return (udi_cdc_multi_get_free_tx_buffer(port) != 0);
+}
+
+bool udi_cdc_is_tx_ready(void)
+{
+ return udi_cdc_multi_is_tx_ready(0);
+}
+
+int udi_cdc_multi_putc(uint8_t port, int value)
+{
+ irqflags_t flags;
+ bool b_databit_9;
+ uint8_t buf_sel;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ b_databit_9 = (9 == udi_cdc_line_coding[port].bDataBits);
+
+udi_cdc_putc_process_one_byte:
+ // Check available space
+ if (!udi_cdc_multi_is_tx_ready(port)) {
+ if (!udi_cdc_data_running) {
+ return false;
+ }
+ goto udi_cdc_putc_process_one_byte;
+ }
+
+ // Write value
+ flags = cpu_irq_save();
+ buf_sel = udi_cdc_tx_buf_sel[port];
+ udi_cdc_tx_buf[port][buf_sel][udi_cdc_tx_buf_nb[port][buf_sel]++] = value;
+ cpu_irq_restore(flags);
+
+ if (b_databit_9) {
+ // Send MSB
+ b_databit_9 = false;
+ value = value >> 8;
+ goto udi_cdc_putc_process_one_byte;
+ }
+ return true;
+}
+
+int udi_cdc_putc(int value)
+{
+ return udi_cdc_multi_putc(0, value);
+}
+
+iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t size)
+{
+ irqflags_t flags;
+ uint8_t buf_sel;
+ uint16_t buf_nb;
+ iram_size_t copy_nb;
+ uint8_t *ptr_buf = (uint8_t *)buf;
+
+#if UDI_CDC_PORT_NB == 1 // To optimize code
+ port = 0;
+#endif
+
+ if (9 == udi_cdc_line_coding[port].bDataBits) {
+ size *=2;
+ }
+
+udi_cdc_write_buf_loop_wait:
+ // Check available space
+ if (!udi_cdc_multi_is_tx_ready(port)) {
+ if (!udi_cdc_data_running) {
+ return size;
+ }
+ goto udi_cdc_write_buf_loop_wait;
+ }
+
+ // Write values
+ flags = cpu_irq_save();
+ buf_sel = udi_cdc_tx_buf_sel[port];
+ buf_nb = udi_cdc_tx_buf_nb[port][buf_sel];
+ copy_nb = UDI_CDC_TX_BUFFERS - buf_nb;
+ if (copy_nb > size) {
+ copy_nb = size;
+ }
+ memcpy(&udi_cdc_tx_buf[port][buf_sel][buf_nb], ptr_buf, copy_nb);
+ udi_cdc_tx_buf_nb[port][buf_sel] = buf_nb + copy_nb;
+ cpu_irq_restore(flags);
+
+ // Update buffer pointer
+ ptr_buf = ptr_buf + copy_nb;
+ size -= copy_nb;
+
+ if (size) {
+ goto udi_cdc_write_buf_loop_wait;
+ }
+
+ return 0;
+}
+
+iram_size_t udi_cdc_write_buf(const void* buf, iram_size_t size)
+{
+ return udi_cdc_multi_write_buf(0, buf, size);
+}
+
+//@}
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h
new file mode 100644
index 0000000000..45c5cef5ae
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_cdc.h
@@ -0,0 +1,810 @@
+/**
+ * \file
+ *
+ * \brief USB Device Communication Device Class (CDC) interface definitions.
+ *
+ * Copyright (c) 2009-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDI_CDC_H_
+#define _UDI_CDC_H_
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "usb_protocol_cdc.h"
+#include "udd.h"
+#include "udc_desc.h"
+#include "udi.h"
+
+// Check the number of port
+#ifndef UDI_CDC_PORT_NB
+# define UDI_CDC_PORT_NB 1
+#endif
+#if (UDI_CDC_PORT_NB < 1) || (UDI_CDC_PORT_NB > 7)
+# error UDI_CDC_PORT_NB must be between 1 and 7
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \addtogroup udi_cdc_group_udc
+ * @{
+ */
+
+//! Global structure which contains standard UDI API for UDC
+extern UDC_DESC_STORAGE udi_api_t udi_api_cdc_comm;
+extern UDC_DESC_STORAGE udi_api_t udi_api_cdc_data;
+//@}
+
+/**
+ * \ingroup udi_cdc_group
+ * \defgroup udi_cdc_group_desc USB interface descriptors
+ *
+ * The following structures provide predefined USB interface descriptors.
+ * It must be used to define the final USB descriptors.
+ */
+//@{
+
+/**
+ * \brief Communication Class interface descriptor
+ *
+ * Interface descriptor with associated functional and endpoint
+ * descriptors for the CDC Communication Class interface.
+ */
+typedef struct {
+ //! Standard interface descriptor
+ usb_iface_desc_t iface;
+ //! CDC Header functional descriptor
+ usb_cdc_hdr_desc_t header;
+ //! CDC Abstract Control Model functional descriptor
+ usb_cdc_acm_desc_t acm;
+ //! CDC Union functional descriptor
+ usb_cdc_union_desc_t union_desc;
+ //! CDC Call Management functional descriptor
+ usb_cdc_call_mgmt_desc_t call_mgmt;
+ //! Notification endpoint descriptor
+ usb_ep_desc_t ep_notify;
+} udi_cdc_comm_desc_t;
+
+
+/**
+ * \brief Data Class interface descriptor
+ *
+ * Interface descriptor with associated endpoint descriptors for the
+ * CDC Data Class interface.
+ */
+typedef struct {
+ //! Standard interface descriptor
+ usb_iface_desc_t iface;
+ //! Data IN/OUT endpoint descriptors
+ usb_ep_desc_t ep_in;
+ usb_ep_desc_t ep_out;
+} udi_cdc_data_desc_t;
+
+
+//! CDC communication endpoints size for all speeds
+#define UDI_CDC_COMM_EP_SIZE 64
+//! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)
+#define UDI_CDC_DATA_EPS_FS_SIZE 64
+//! CDC data endpoints size for HS speed (512B only)
+#define UDI_CDC_DATA_EPS_HS_SIZE 512
+
+/**
+ * \name Content of interface descriptors
+ * Up to 7 CDC interfaces can be implemented on a USB device.
+ */
+//@{
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_0
+#define UDI_CDC_IAD_STRING_ID_0 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_0
+#define UDI_CDC_COMM_STRING_ID_0 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_0
+#define UDI_CDC_DATA_STRING_ID_0 0
+#endif
+#define UDI_CDC_IAD_DESC_0 UDI_CDC_IAD_DESC(0)
+#define UDI_CDC_COMM_DESC_0 UDI_CDC_COMM_DESC(0)
+#define UDI_CDC_DATA_DESC_0_FS UDI_CDC_DATA_DESC_FS(0)
+#define UDI_CDC_DATA_DESC_0_HS UDI_CDC_DATA_DESC_HS(0)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_1
+#define UDI_CDC_IAD_STRING_ID_1 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_1
+#define UDI_CDC_COMM_STRING_ID_1 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_1
+#define UDI_CDC_DATA_STRING_ID_1 0
+#endif
+#define UDI_CDC_IAD_DESC_1 UDI_CDC_IAD_DESC(1)
+#define UDI_CDC_COMM_DESC_1 UDI_CDC_COMM_DESC(1)
+#define UDI_CDC_DATA_DESC_1_FS UDI_CDC_DATA_DESC_FS(1)
+#define UDI_CDC_DATA_DESC_1_HS UDI_CDC_DATA_DESC_HS(1)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_2
+#define UDI_CDC_IAD_STRING_ID_2 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_2
+#define UDI_CDC_COMM_STRING_ID_2 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_2
+#define UDI_CDC_DATA_STRING_ID_2 0
+#endif
+#define UDI_CDC_IAD_DESC_2 UDI_CDC_IAD_DESC(2)
+#define UDI_CDC_COMM_DESC_2 UDI_CDC_COMM_DESC(2)
+#define UDI_CDC_DATA_DESC_2_FS UDI_CDC_DATA_DESC_FS(2)
+#define UDI_CDC_DATA_DESC_2_HS UDI_CDC_DATA_DESC_HS(2)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_3
+#define UDI_CDC_IAD_STRING_ID_3 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_3
+#define UDI_CDC_COMM_STRING_ID_3 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_3
+#define UDI_CDC_DATA_STRING_ID_3 0
+#endif
+#define UDI_CDC_IAD_DESC_3 UDI_CDC_IAD_DESC(3)
+#define UDI_CDC_COMM_DESC_3 UDI_CDC_COMM_DESC(3)
+#define UDI_CDC_DATA_DESC_3_FS UDI_CDC_DATA_DESC_FS(3)
+#define UDI_CDC_DATA_DESC_3_HS UDI_CDC_DATA_DESC_HS(3)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_4
+#define UDI_CDC_IAD_STRING_ID_4 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_4
+#define UDI_CDC_COMM_STRING_ID_4 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_4
+#define UDI_CDC_DATA_STRING_ID_4 0
+#endif
+#define UDI_CDC_IAD_DESC_4 UDI_CDC_IAD_DESC(4)
+#define UDI_CDC_COMM_DESC_4 UDI_CDC_COMM_DESC(4)
+#define UDI_CDC_DATA_DESC_4_FS UDI_CDC_DATA_DESC_FS(4)
+#define UDI_CDC_DATA_DESC_4_HS UDI_CDC_DATA_DESC_HS(4)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_5
+#define UDI_CDC_IAD_STRING_ID_5 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_5
+#define UDI_CDC_COMM_STRING_ID_5 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_5
+#define UDI_CDC_DATA_STRING_ID_5 0
+#endif
+#define UDI_CDC_IAD_DESC_5 UDI_CDC_IAD_DESC(5)
+#define UDI_CDC_COMM_DESC_5 UDI_CDC_COMM_DESC(5)
+#define UDI_CDC_DATA_DESC_5_FS UDI_CDC_DATA_DESC_FS(5)
+#define UDI_CDC_DATA_DESC_5_HS UDI_CDC_DATA_DESC_HS(5)
+
+//! By default no string associated to these interfaces
+#ifndef UDI_CDC_IAD_STRING_ID_6
+#define UDI_CDC_IAD_STRING_ID_6 0
+#endif
+#ifndef UDI_CDC_COMM_STRING_ID_6
+#define UDI_CDC_COMM_STRING_ID_6 0
+#endif
+#ifndef UDI_CDC_DATA_STRING_ID_6
+#define UDI_CDC_DATA_STRING_ID_6 0
+#endif
+#define UDI_CDC_IAD_DESC_6 UDI_CDC_IAD_DESC(6)
+#define UDI_CDC_COMM_DESC_6 UDI_CDC_COMM_DESC(6)
+#define UDI_CDC_DATA_DESC_6_FS UDI_CDC_DATA_DESC_FS(6)
+#define UDI_CDC_DATA_DESC_6_HS UDI_CDC_DATA_DESC_HS(6)
+//@}
+
+
+//! Content of CDC IAD interface descriptor for all speeds
+#define UDI_CDC_IAD_DESC(port) { \
+ .bLength = sizeof(usb_iad_desc_t),\
+ .bDescriptorType = USB_DT_IAD,\
+ .bInterfaceCount = 2,\
+ .bFunctionClass = CDC_CLASS_COMM,\
+ .bFunctionSubClass = CDC_SUBCLASS_ACM,\
+ .bFunctionProtocol = CDC_PROTOCOL_V25TER,\
+ .bFirstInterface = UDI_CDC_COMM_IFACE_NUMBER_##port,\
+ .iFunction = UDI_CDC_IAD_STRING_ID_##port,\
+ }
+
+//! Content of CDC COMM interface descriptor for all speeds
+#define UDI_CDC_COMM_DESC(port) { \
+ .iface.bLength = sizeof(usb_iface_desc_t),\
+ .iface.bDescriptorType = USB_DT_INTERFACE,\
+ .iface.bAlternateSetting = 0,\
+ .iface.bNumEndpoints = 1,\
+ .iface.bInterfaceClass = CDC_CLASS_COMM,\
+ .iface.bInterfaceSubClass = CDC_SUBCLASS_ACM,\
+ .iface.bInterfaceProtocol = CDC_PROTOCOL_V25TER,\
+ .header.bFunctionLength = sizeof(usb_cdc_hdr_desc_t),\
+ .header.bDescriptorType = CDC_CS_INTERFACE,\
+ .header.bDescriptorSubtype = CDC_SCS_HEADER,\
+ .header.bcdCDC = LE16(0x0110),\
+ .call_mgmt.bFunctionLength = sizeof(usb_cdc_call_mgmt_desc_t),\
+ .call_mgmt.bDescriptorType = CDC_CS_INTERFACE,\
+ .call_mgmt.bDescriptorSubtype = CDC_SCS_CALL_MGMT,\
+ .call_mgmt.bmCapabilities = \
+ CDC_CALL_MGMT_SUPPORTED | CDC_CALL_MGMT_OVER_DCI,\
+ .acm.bFunctionLength = sizeof(usb_cdc_acm_desc_t),\
+ .acm.bDescriptorType = CDC_CS_INTERFACE,\
+ .acm.bDescriptorSubtype = CDC_SCS_ACM,\
+ .acm.bmCapabilities = CDC_ACM_SUPPORT_LINE_REQUESTS,\
+ .union_desc.bFunctionLength = sizeof(usb_cdc_union_desc_t),\
+ .union_desc.bDescriptorType = CDC_CS_INTERFACE,\
+ .union_desc.bDescriptorSubtype= CDC_SCS_UNION,\
+ .ep_notify.bLength = sizeof(usb_ep_desc_t),\
+ .ep_notify.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_notify.bmAttributes = USB_EP_TYPE_INTERRUPT,\
+ .ep_notify.wMaxPacketSize = LE16(UDI_CDC_COMM_EP_SIZE),\
+ .ep_notify.bInterval = 0x10,\
+ .ep_notify.bEndpointAddress = UDI_CDC_COMM_EP_##port,\
+ .iface.bInterfaceNumber = UDI_CDC_COMM_IFACE_NUMBER_##port,\
+ .call_mgmt.bDataInterface = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .union_desc.bMasterInterface = UDI_CDC_COMM_IFACE_NUMBER_##port,\
+ .union_desc.bSlaveInterface0 = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .iface.iInterface = UDI_CDC_COMM_STRING_ID_##port,\
+ }
+
+//! Content of CDC DATA interface descriptors
+#define UDI_CDC_DATA_DESC_COMMON \
+ .iface.bLength = sizeof(usb_iface_desc_t),\
+ .iface.bDescriptorType = USB_DT_INTERFACE,\
+ .iface.bAlternateSetting = 0,\
+ .iface.bNumEndpoints = 2,\
+ .iface.bInterfaceClass = CDC_CLASS_DATA,\
+ .iface.bInterfaceSubClass = 0,\
+ .iface.bInterfaceProtocol = 0,\
+ .ep_in.bLength = sizeof(usb_ep_desc_t),\
+ .ep_in.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_in.bmAttributes = USB_EP_TYPE_BULK,\
+ .ep_in.bInterval = 0,\
+ .ep_out.bLength = sizeof(usb_ep_desc_t),\
+ .ep_out.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_out.bmAttributes = USB_EP_TYPE_BULK,\
+ .ep_out.bInterval = 0,
+
+#define UDI_CDC_DATA_DESC_FS(port) { \
+ UDI_CDC_DATA_DESC_COMMON \
+ .ep_in.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_FS_SIZE),\
+ .ep_out.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_FS_SIZE),\
+ .ep_in.bEndpointAddress = UDI_CDC_DATA_EP_IN_##port,\
+ .ep_out.bEndpointAddress = UDI_CDC_DATA_EP_OUT_##port,\
+ .iface.bInterfaceNumber = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .iface.iInterface = UDI_CDC_DATA_STRING_ID_##port,\
+ }
+
+#define UDI_CDC_DATA_DESC_HS(port) { \
+ UDI_CDC_DATA_DESC_COMMON \
+ .ep_in.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_HS_SIZE),\
+ .ep_out.wMaxPacketSize = LE16(UDI_CDC_DATA_EPS_HS_SIZE),\
+ .ep_in.bEndpointAddress = UDI_CDC_DATA_EP_IN_##port,\
+ .ep_out.bEndpointAddress = UDI_CDC_DATA_EP_OUT_##port,\
+ .iface.bInterfaceNumber = UDI_CDC_DATA_IFACE_NUMBER_##port,\
+ .iface.iInterface = UDI_CDC_DATA_STRING_ID_##port,\
+ }
+
+//@}
+
+/**
+ * \ingroup udi_group
+ * \defgroup udi_cdc_group USB Device Interface (UDI) for Communication Class Device (CDC)
+ *
+ * Common APIs used by high level application to use this USB class.
+ *
+ * These routines are used to transfer and control data
+ * to/from USB CDC endpoint.
+ *
+ * See \ref udi_cdc_quickstart.
+ * @{
+ */
+
+/**
+ * \name Interface for application with single CDC interface support
+ */
+//@{
+
+/**
+ * \brief Notify a state change of DCD signal
+ *
+ * \param b_set DCD is enabled if true, else disabled
+ */
+void udi_cdc_ctrl_signal_dcd(bool b_set);
+
+/**
+ * \brief Notify a state change of DSR signal
+ *
+ * \param b_set DSR is enabled if true, else disabled
+ */
+void udi_cdc_ctrl_signal_dsr(bool b_set);
+
+/**
+ * \brief Notify a framing error
+ */
+void udi_cdc_signal_framing_error(void);
+
+/**
+ * \brief Notify a parity error
+ */
+void udi_cdc_signal_parity_error(void);
+
+/**
+ * \brief Notify a overrun
+ */
+void udi_cdc_signal_overrun(void);
+
+/**
+ * \brief Gets the number of byte received
+ *
+ * \return the number of data available
+ */
+iram_size_t udi_cdc_get_nb_received_data(void);
+
+/**
+ * \brief This function checks if a character has been received on the CDC line
+ *
+ * \return \c 1 if a byte is ready to be read.
+ */
+bool udi_cdc_is_rx_ready(void);
+
+/**
+ * \brief Waits and gets a value on CDC line
+ *
+ * \return value read on CDC line
+ */
+int udi_cdc_getc(void);
+
+/**
+ * \brief Reads a RAM buffer on CDC line
+ *
+ * \param buf Values read
+ * \param size Number of value read
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_read_buf(void* buf, iram_size_t size);
+
+/**
+ * \brief Non polling reads of a up to 'size' data from CDC line
+ *
+ * \param port Communication port number to manage
+ * \param buf Buffer where to store read data
+ * \param size Maximum number of data to read (size of buffer)
+ *
+ * \return the number of data effectively read
+ */
+iram_size_t udi_cdc_read_no_polling(void* buf, iram_size_t size);
+
+/**
+ * \brief Gets the number of free byte in TX buffer
+ *
+ * \return the number of free byte in TX buffer
+ */
+iram_size_t udi_cdc_get_free_tx_buffer(void);
+
+/**
+ * \brief This function checks if a new character sent is possible
+ * The type int is used to support scanf redirection from compiler LIB.
+ *
+ * \return \c 1 if a new character can be sent
+ */
+bool udi_cdc_is_tx_ready(void);
+
+/**
+ * \brief Puts a byte on CDC line
+ * The type int is used to support printf redirection from compiler LIB.
+ *
+ * \param value Value to put
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+int udi_cdc_putc(int value);
+
+/**
+ * \brief Writes a RAM buffer on CDC line
+ *
+ * \param buf Values to write
+ * \param size Number of value to write
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_write_buf(const void* buf, iram_size_t size);
+//@}
+
+/**
+ * \name Interface for application with multi CDC interfaces support
+ */
+//@{
+
+/**
+ * \brief Notify a state change of DCD signal
+ *
+ * \param port Communication port number to manage
+ * \param b_set DCD is enabled if true, else disabled
+ */
+void udi_cdc_multi_ctrl_signal_dcd(uint8_t port, bool b_set);
+
+/**
+ * \brief Notify a state change of DSR signal
+ *
+ * \param port Communication port number to manage
+ * \param b_set DSR is enabled if true, else disabled
+ */
+void udi_cdc_multi_ctrl_signal_dsr(uint8_t port, bool b_set);
+
+/**
+ * \brief Notify a framing error
+ *
+ * \param port Communication port number to manage
+ */
+void udi_cdc_multi_signal_framing_error(uint8_t port);
+
+/**
+ * \brief Notify a parity error
+ *
+ * \param port Communication port number to manage
+ */
+void udi_cdc_multi_signal_parity_error(uint8_t port);
+
+/**
+ * \brief Notify a overrun
+ *
+ * \param port Communication port number to manage
+ */
+void udi_cdc_multi_signal_overrun(uint8_t port);
+
+/**
+ * \brief Gets the number of byte received
+ *
+ * \param port Communication port number to manage
+ *
+ * \return the number of data available
+ */
+iram_size_t udi_cdc_multi_get_nb_received_data(uint8_t port);
+
+/**
+ * \brief This function checks if a character has been received on the CDC line
+ *
+ * \param port Communication port number to manage
+ *
+ * \return \c 1 if a byte is ready to be read.
+ */
+bool udi_cdc_multi_is_rx_ready(uint8_t port);
+
+/**
+ * \brief Waits and gets a value on CDC line
+ *
+ * \param port Communication port number to manage
+ *
+ * \return value read on CDC line
+ */
+int udi_cdc_multi_getc(uint8_t port);
+
+/**
+ * \brief Reads a RAM buffer on CDC line
+ *
+ * \param port Communication port number to manage
+ * \param buf Values read
+ * \param size Number of values read
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_multi_read_buf(uint8_t port, void* buf, iram_size_t size);
+
+/**
+ * \brief Gets the number of free byte in TX buffer
+ *
+ * \param port Communication port number to manage
+ *
+ * \return the number of free byte in TX buffer
+ */
+iram_size_t udi_cdc_multi_get_free_tx_buffer(uint8_t port);
+
+/**
+ * \brief This function checks if a new character sent is possible
+ * The type int is used to support scanf redirection from compiler LIB.
+ *
+ * \param port Communication port number to manage
+ *
+ * \return \c 1 if a new character can be sent
+ */
+bool udi_cdc_multi_is_tx_ready(uint8_t port);
+
+/**
+ * \brief Puts a byte on CDC line
+ * The type int is used to support printf redirection from compiler LIB.
+ *
+ * \param port Communication port number to manage
+ * \param value Value to put
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+int udi_cdc_multi_putc(uint8_t port, int value);
+
+/**
+ * \brief Writes a RAM buffer on CDC line
+ *
+ * \param port Communication port number to manage
+ * \param buf Values to write
+ * \param size Number of value to write
+ *
+ * \return the number of data remaining
+ */
+iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t size);
+//@}
+
+//@}
+
+/**
+ * \page udi_cdc_quickstart Quick start guide for USB device Communication Class Device module (UDI CDC)
+ *
+ * This is the quick start guide for the \ref udi_cdc_group
+ * "USB device interface CDC module (UDI CDC)" with step-by-step instructions on
+ * how to configure and use the modules in a selection of use cases.
+ *
+ * The use cases contain several code fragments. The code fragments in the
+ * steps for setup can be copied into a custom initialization function, while
+ * the steps for usage can be copied into, e.g., the main application function.
+ *
+ * \section udi_cdc_basic_use_case Basic use case
+ * In this basic use case, the "USB CDC (Single Interface Device)" module is used
+ * with only one communication port.
+ * The "USB CDC (Composite Device)" module usage is described in \ref udi_cdc_use_cases
+ * "Advanced use cases".
+ *
+ * \section udi_cdc_basic_use_case_setup Setup steps
+ * \subsection udi_cdc_basic_use_case_setup_prereq Prerequisites
+ * \copydetails udc_basic_use_case_setup_prereq
+ * \subsection udi_cdc_basic_use_case_setup_code Example code
+ * \copydetails udc_basic_use_case_setup_code
+ * \subsection udi_cdc_basic_use_case_setup_flow Workflow
+ * \copydetails udc_basic_use_case_setup_flow
+ *
+ * \section udi_cdc_basic_use_case_usage Usage steps
+ *
+ * \subsection udi_cdc_basic_use_case_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
+ extern bool my_callback_cdc_enable(void);
+ #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
+ extern void my_callback_cdc_disable(void);
+ #define UDI_CDC_LOW_RATE
+
+ #define UDI_CDC_DEFAULT_RATE 115200
+ #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
+ #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
+ #define UDI_CDC_DEFAULT_DATABITS 8
+
+ #include "udi_cdc_conf.h" // At the end of conf_usb.h file
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ static bool my_flag_autorize_cdc_transfert = false;
+ bool my_callback_cdc_enable(void)
+ {
+ my_flag_autorize_cdc_transfert = true;
+ return true;
+ }
+ void my_callback_cdc_disable(void)
+ {
+ my_flag_autorize_cdc_transfert = false;
+ }
+
+ void task(void)
+ {
+ if (my_flag_autorize_cdc_transfert) {
+ udi_cdc_putc('A');
+ udi_cdc_getc();
+ }
+ }
+\endcode
+ *
+ * \subsection udi_cdc_basic_use_case_setup_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following configuration,
+ * which is the USB device CDC configuration:
+ * - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for CDC \endcode
+ * \note The USB serial number is mandatory when a CDC interface is used.
+ * - \code #define UDI_CDC_ENABLE_EXT(port) my_callback_cdc_enable()
+ extern bool my_callback_cdc_enable(void); \endcode
+ * \note After the device enumeration (detecting and identifying USB devices),
+ * the USB host starts the device configuration. When the USB CDC interface
+ * from the device is accepted by the host, the USB host enables this interface and the
+ * UDI_CDC_ENABLE_EXT() callback function is called and return true.
+ * Thus, when this event is received, the data transfer on CDC interface are authorized.
+ * - \code #define UDI_CDC_DISABLE_EXT(port) my_callback_cdc_disable()
+ extern void my_callback_cdc_disable(void); \endcode
+ * \note When the USB device is unplugged or is reset by the USB host, the USB
+ * interface is disabled and the UDI_CDC_DISABLE_EXT() callback function
+ * is called. Thus, the data transfer must be stopped on CDC interface.
+ * - \code #define UDI_CDC_LOW_RATE \endcode
+ * \note Define it when the transfer CDC Device to Host is a low rate
+ * (<512000 bauds) to reduce CDC buffers size.
+ * - \code #define UDI_CDC_DEFAULT_RATE 115200
+ #define UDI_CDC_DEFAULT_STOPBITS CDC_STOP_BITS_1
+ #define UDI_CDC_DEFAULT_PARITY CDC_PAR_NONE
+ #define UDI_CDC_DEFAULT_DATABITS 8 \endcode
+ * \note Default configuration of communication port at startup.
+ * -# Send or wait data on CDC line:
+ * - \code // Waits and gets a value on CDC line
+ int udi_cdc_getc(void);
+ // Reads a RAM buffer on CDC line
+ iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
+ // Puts a byte on CDC line
+ int udi_cdc_putc(int value);
+ // Writes a RAM buffer on CDC line
+ iram_size_t udi_cdc_write_buf(const int* buf, iram_size_t size); \endcode
+ *
+ * \section udi_cdc_use_cases Advanced use cases
+ * For more advanced use of the UDI CDC module, see the following use cases:
+ * - \subpage udi_cdc_use_case_composite
+ * - \subpage udc_use_case_1
+ * - \subpage udc_use_case_2
+ * - \subpage udc_use_case_3
+ * - \subpage udc_use_case_4
+ * - \subpage udc_use_case_5
+ * - \subpage udc_use_case_6
+ */
+
+/**
+ * \page udi_cdc_use_case_composite CDC in a composite device
+ *
+ * A USB Composite Device is a USB Device which uses more than one USB class.
+ * In this use case, the "USB CDC (Composite Device)" module is used to
+ * create a USB composite device. Thus, this USB module can be associated with
+ * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
+ *
+ * Also, you can refer to application note
+ *
+ * AVR4902 ASF - USB Composite Device.
+ *
+ * \section udi_cdc_use_case_composite_setup Setup steps
+ * For the setup code of this use case to work, the
+ * \ref udi_cdc_basic_use_case "basic use case" must be followed.
+ *
+ * \section udi_cdc_use_case_composite_usage Usage steps
+ *
+ * \subsection udi_cdc_use_case_composite_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_EP_CTRL_SIZE 64
+ #define USB_DEVICE_NB_INTERFACE (X+2)
+ #define USB_DEVICE_MAX_EP (X+3)
+
+ #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
+ #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
+ #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+ #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
+ #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1
+
+ #define UDI_COMPOSITE_DESC_T \
+ usb_iad_desc_t udi_cdc_iad; \
+ udi_cdc_comm_desc_t udi_cdc_comm; \
+ udi_cdc_data_desc_t udi_cdc_data; \
+ ...
+ #define UDI_COMPOSITE_DESC_FS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
+ ...
+ #define UDI_COMPOSITE_DESC_HS \
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
+ ...
+ #define UDI_COMPOSITE_API \
+ &udi_api_cdc_comm, \
+ &udi_api_cdc_data, \
+ ...
+\endcode
+ *
+ * \subsection udi_cdc_use_case_composite_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required for a USB composite device configuration:
+ * - \code // Endpoint control size, This must be:
+ // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
+ // - 64 for a high speed device
+ #define USB_DEVICE_EP_CTRL_SIZE 64
+ // Total Number of interfaces on this USB device.
+ // Add 2 for CDC.
+ #define USB_DEVICE_NB_INTERFACE (X+2)
+ // Total number of endpoints on this USB device.
+ // This must include each endpoint for each interface.
+ // Add 3 for CDC.
+ #define USB_DEVICE_MAX_EP (X+3) \endcode
+ * -# Ensure that conf_usb.h contains the description of
+ * composite device:
+ * - \code // The endpoint numbers chosen by you for the CDC.
+ // The endpoint numbers starting from 1.
+ #define UDI_CDC_DATA_EP_IN_0 (1 | USB_EP_DIR_IN) // TX
+ #define UDI_CDC_DATA_EP_OUT_0 (2 | USB_EP_DIR_OUT) // RX
+ #define UDI_CDC_COMM_EP_0 (3 | USB_EP_DIR_IN) // Notify endpoint
+ // The interface index of an interface starting from 0
+ #define UDI_CDC_COMM_IFACE_NUMBER_0 X+0
+ #define UDI_CDC_DATA_IFACE_NUMBER_0 X+1 \endcode
+ * -# Ensure that conf_usb.h contains the following parameters
+ * required for a USB composite device configuration:
+ * - \code // USB Interfaces descriptor structure
+ #define UDI_COMPOSITE_DESC_T \
+ ...
+ usb_iad_desc_t udi_cdc_iad; \
+ udi_cdc_comm_desc_t udi_cdc_comm; \
+ udi_cdc_data_desc_t udi_cdc_data; \
+ ...
+ // USB Interfaces descriptor value for Full Speed
+ #define UDI_COMPOSITE_DESC_FS \
+ ...
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_FS, \
+ ...
+ // USB Interfaces descriptor value for High Speed
+ #define UDI_COMPOSITE_DESC_HS \
+ ...
+ .udi_cdc_iad = UDI_CDC_IAD_DESC_0, \
+ .udi_cdc_comm = UDI_CDC_COMM_DESC_0, \
+ .udi_cdc_data = UDI_CDC_DATA_DESC_0_HS, \
+ ...
+ // USB Interface APIs
+ #define UDI_COMPOSITE_API \
+ ...
+ &udi_api_cdc_comm, \
+ &udi_api_cdc_data, \
+ ... \endcode
+ * - \note The descriptors order given in the four lists above must be the
+ * same as the order defined by all interface indexes. The interface index
+ * orders are defined through UDI_X_IFACE_NUMBER defines.\n
+ * Also, the CDC requires a USB Interface Association Descriptor (IAD) for
+ * composite device.
+ */
+
+#ifdef __cplusplus
+}
+#endif
+#endif // _UDI_CDC_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c b/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c
new file mode 100644
index 0000000000..85f81999fd
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_composite_desc.c
@@ -0,0 +1,188 @@
+/**
+ * \file
+ *
+ * \brief Descriptors for an USB Composite Device
+ *
+ * Copyright (c) 2009-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "conf_usb.h"
+#include "udd.h"
+#include "udc_desc.h"
+
+/**
+ * \defgroup udi_group_desc Descriptors for a USB Device
+ * composite
+ *
+ * @{
+ */
+
+/**INDENT-OFF**/
+
+//! USB Device Descriptor
+COMPILER_WORD_ALIGNED
+UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
+ .bLength = sizeof(usb_dev_desc_t),
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = LE16(USB_V2_0),
+ .bDeviceClass = 0,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ .bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
+ .idVendor = LE16(USB_DEVICE_VENDOR_ID),
+ .idProduct = LE16(USB_DEVICE_PRODUCT_ID),
+ .bcdDevice = LE16((USB_DEVICE_MAJOR_VERSION << 8)
+ | USB_DEVICE_MINOR_VERSION),
+#ifdef USB_DEVICE_MANUFACTURE_NAME
+ .iManufacturer = 1,
+#else
+ .iManufacturer = 0, // No manufacture string
+#endif
+#ifdef USB_DEVICE_PRODUCT_NAME
+ .iProduct = 2,
+#else
+ .iProduct = 0, // No product string
+#endif
+#if (defined USB_DEVICE_SERIAL_NAME || defined USB_DEVICE_GET_SERIAL_NAME_POINTER)
+ .iSerialNumber = 3,
+#else
+ .iSerialNumber = 0, // No serial string
+#endif
+ .bNumConfigurations = 1
+};
+
+
+#ifdef USB_DEVICE_HS_SUPPORT
+//! USB Device Qualifier Descriptor for HS
+COMPILER_WORD_ALIGNED
+UDC_DESC_STORAGE usb_dev_qual_desc_t udc_device_qual = {
+ .bLength = sizeof(usb_dev_qual_desc_t),
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+ .bcdUSB = LE16(USB_V2_0),
+ .bDeviceClass = 0,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = 0,
+ .bMaxPacketSize0 = USB_DEVICE_EP_CTRL_SIZE,
+ .bNumConfigurations = 1
+};
+#endif
+
+//! Structure for USB Device Configuration Descriptor
+COMPILER_PACK_SET(1)
+typedef struct {
+ usb_conf_desc_t conf;
+ UDI_COMPOSITE_DESC_T;
+} udc_desc_t;
+COMPILER_PACK_RESET()
+
+//! USB Device Configuration Descriptor filled for FS
+COMPILER_WORD_ALIGNED
+UDC_DESC_STORAGE udc_desc_t udc_desc_fs = {
+ .conf.bLength = sizeof(usb_conf_desc_t),
+ .conf.bDescriptorType = USB_DT_CONFIGURATION,
+ .conf.wTotalLength = LE16(sizeof(udc_desc_t)),
+ .conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
+ .conf.bConfigurationValue = 1,
+ .conf.iConfiguration = 0,
+ .conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
+ .conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
+ UDI_COMPOSITE_DESC_FS
+};
+
+#ifdef USB_DEVICE_HS_SUPPORT
+//! USB Device Configuration Descriptor filled for HS
+COMPILER_WORD_ALIGNED
+UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
+ .conf.bLength = sizeof(usb_conf_desc_t),
+ .conf.bDescriptorType = USB_DT_CONFIGURATION,
+ .conf.wTotalLength = LE16(sizeof(udc_desc_t)),
+ .conf.bNumInterfaces = USB_DEVICE_NB_INTERFACE,
+ .conf.bConfigurationValue = 1,
+ .conf.iConfiguration = 0,
+ .conf.bmAttributes = USB_CONFIG_ATTR_MUST_SET | USB_DEVICE_ATTR,
+ .conf.bMaxPower = USB_CONFIG_MAX_POWER(USB_DEVICE_POWER),
+ UDI_COMPOSITE_DESC_HS
+};
+#endif
+
+
+/**
+ * \name UDC structures which contains all USB Device definitions
+ */
+//@{
+
+//! Associate an UDI for each USB interface
+UDC_DESC_STORAGE udi_api_t *udi_apis[USB_DEVICE_NB_INTERFACE] = {
+ UDI_COMPOSITE_API
+};
+
+//! Add UDI with USB Descriptors FS
+UDC_DESC_STORAGE udc_config_speed_t udc_config_lsfs[1] = {{
+ .desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_fs,
+ .udi_apis = udi_apis,
+}};
+
+#ifdef USB_DEVICE_HS_SUPPORT
+//! Add UDI with USB Descriptors HS
+UDC_DESC_STORAGE udc_config_speed_t udc_config_hs[1] = {{
+ .desc = (usb_conf_desc_t UDC_DESC_STORAGE*)&udc_desc_hs,
+ .udi_apis = udi_apis,
+}};
+#endif
+
+//! Add all information about USB Device in global structure for UDC
+UDC_DESC_STORAGE udc_config_t udc_config = {
+ .confdev_lsfs = &udc_device_desc,
+ .conf_lsfs = udc_config_lsfs,
+#ifdef USB_DEVICE_HS_SUPPORT
+ .confdev_hs = &udc_device_desc,
+ .qualifier = &udc_device_qual,
+ .conf_hs = udc_config_hs,
+#endif
+};
+
+//@}
+/**INDENT-ON**/
+//@}
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c
new file mode 100644
index 0000000000..f8f93a09c5
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.c
@@ -0,0 +1,1128 @@
+/**
+ * \file
+ *
+ * \brief USB Device Mass Storage Class (MSC) interface.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "usb_protocol_msc.h"
+#include "spc_protocol.h"
+#include "sbc_protocol.h"
+#include "udd.h"
+#include "udc.h"
+#include "udi_msc.h"
+#include "ctrl_access.h"
+#include
+
+#ifndef UDI_MSC_NOTIFY_TRANS_EXT
+# define UDI_MSC_NOTIFY_TRANS_EXT()
+#endif
+
+/**
+ * \ingroup udi_msc_group
+ * \defgroup udi_msc_group_udc Interface with USB Device Core (UDC)
+ *
+ * Structures and functions required by UDC.
+ *
+ * @{
+ */
+bool udi_msc_enable(void);
+void udi_msc_disable(void);
+bool udi_msc_setup(void);
+uint8_t udi_msc_getsetting(void);
+
+//! Global structure which contains standard UDI API for UDC
+UDC_DESC_STORAGE udi_api_t udi_api_msc = {
+ .enable = udi_msc_enable,
+ .disable = udi_msc_disable,
+ .setup = udi_msc_setup,
+ .getsetting = udi_msc_getsetting,
+ .sof_notify = NULL,
+};
+//@}
+
+
+/**
+ * \ingroup udi_msc_group
+ * \defgroup udi_msc_group_internal Implementation of UDI MSC
+ *
+ * Class internal implementation
+ * @{
+ */
+
+//! Static block size for all memories
+#define UDI_MSC_BLOCK_SIZE 512L
+
+/**
+ * \name Variables to manage SCSI requests
+ */
+//@{
+
+//! Structure to receive a CBW packet
+UDC_BSS(4) static struct usb_msc_cbw udi_msc_cbw;
+//! Structure to send a CSW packet
+UDC_DATA(4) static struct usb_msc_csw udi_msc_csw =
+ {.dCSWSignature = CPU_TO_BE32(USB_CSW_SIGNATURE) };
+//! Number of lun
+UDC_DATA(4) static uint8_t udi_msc_nb_lun = 0;
+//! Structure with current SCSI sense data
+UDC_BSS(4) static struct scsi_request_sense_data udi_msc_sense;
+
+/**
+ * \name Variables to manage the background read/write SCSI commands
+ */
+//@{
+//! True if an invalid CBW command has been detected
+static bool udi_msc_b_cbw_invalid = false;
+//! True if a transfer command must be processed
+static bool udi_msc_b_trans_req = false;
+//! True if it is a read command, else write command
+static bool udi_msc_b_read;
+//! Memory address to execute the command
+static uint32_t udi_msc_addr;
+//! Number of block to transfer
+static uint16_t udi_msc_nb_block;
+//! Signal end of transfer, if true
+volatile bool udi_msc_b_ack_trans = true;
+//! Status of transfer, aborted if true
+volatile bool udi_msc_b_abort_trans;
+//! Signal (re)init of transfer, if true (by reset/reconnect)
+volatile bool udi_msc_b_reset_trans = true;
+//@}
+
+//@}
+
+
+/**
+ * \name Internal routines
+ */
+//@{
+
+/**
+ * \name Routines to process CBW packet
+ */
+//@{
+
+/**
+ * \brief Stall CBW request
+ */
+static void udi_msc_cbw_invalid(void);
+
+/**
+ * \brief Stall CSW request
+ */
+static void udi_msc_csw_invalid(void);
+
+/**
+ * \brief Links a callback and buffer on endpoint OUT reception
+ *
+ * Called by:
+ * - enable interface
+ * - at the end of previous command after sending the CSW
+ */
+static void udi_msc_cbw_wait(void);
+
+/**
+ * \brief Callback called after CBW reception
+ * Called by UDD when a transfer is finished or aborted
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer is finished
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
+ * \param nb_received number of data transfered
+ */
+static void udi_msc_cbw_received(udd_ep_status_t status,
+ iram_size_t nb_received, udd_ep_id_t ep);
+
+/**
+ * \brief Function to check the CBW length and direction
+ * Call it after SCSI command decode to check integrity of command
+ *
+ * \param alloc_len number of bytes that device want transfer
+ * \param dir_flag Direction of transfer (USB_CBW_DIRECTION_IN/OUT)
+ *
+ * \retval true if the command can be processed
+ */
+static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
+//@}
+
+
+/**
+ * \name Routines to process small data packet
+ */
+//@{
+
+/**
+ * \brief Sends data on MSC IN endpoint
+ * Called by SCSI command which must send a data to host followed by a CSW
+ *
+ * \param buffer Internal RAM buffer to send
+ * \param buf_size Size of buffer to send
+ */
+static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size);
+
+/**
+ * \brief Callback called after data sent
+ * It start CSW packet process
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer finish
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer aborted
+ * \param nb_sent number of data transfered
+ */
+static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
+ udd_ep_id_t ep);
+//@}
+
+
+/**
+ * \name Routines to process CSW packet
+ */
+//@{
+
+/**
+ * \brief Build CSW packet and send it
+ *
+ * Called at the end of SCSI command
+ */
+static void udi_msc_csw_process(void);
+
+/**
+ * \brief Sends CSW
+ *
+ * Called by #udi_msc_csw_process()
+ * or UDD callback when endpoint halt is cleared
+ */
+void udi_msc_csw_send(void);
+
+/**
+ * \brief Callback called after CSW sent
+ * It restart CBW reception.
+ *
+ * \param status UDD_EP_TRANSFER_OK, if transfer is finished
+ * \param status UDD_EP_TRANSFER_ABORT, if transfer is aborted
+ * \param nb_sent number of data transfered
+ */
+static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
+ udd_ep_id_t ep);
+//@}
+
+
+/**
+ * \name Routines manage sense data
+ */
+//@{
+
+/**
+ * \brief Reinitialize sense data.
+ */
+static void udi_msc_clear_sense(void);
+
+/**
+ * \brief Update sense data with new value to signal a fail
+ *
+ * \param sense_key Sense key
+ * \param add_sense Additional Sense Code
+ * \param lba LBA corresponding at error
+ */
+static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
+ uint32_t lba);
+
+/**
+ * \brief Update sense data with new value to signal success
+ */
+static void udi_msc_sense_pass(void);
+
+/**
+ * \brief Update sense data to signal that memory is not present
+ */
+static void udi_msc_sense_fail_not_present(void);
+
+/**
+ * \brief Update sense data to signal that memory is busy
+ */
+static void udi_msc_sense_fail_busy_or_change(void);
+
+/**
+ * \brief Update sense data to signal a hardware error on memory
+ */
+static void udi_msc_sense_fail_hardware(void);
+
+/**
+ * \brief Update sense data to signal that memory is protected
+ */
+static void udi_msc_sense_fail_protected(void);
+
+/**
+ * \brief Update sense data to signal that CDB fields are not valid
+ */
+static void udi_msc_sense_fail_cdb_invalid(void);
+
+/**
+ * \brief Update sense data to signal that command is not supported
+ */
+static void udi_msc_sense_command_invalid(void);
+//@}
+
+
+/**
+ * \name Routines manage SCSI Commands
+ */
+//@{
+
+/**
+ * \brief Process SPC Request Sense command
+ * Returns error information about last command
+ */
+static void udi_msc_spc_requestsense(void);
+
+/**
+ * \brief Process SPC Inquiry command
+ * Returns information (name,version) about disk
+ */
+static void udi_msc_spc_inquiry(void);
+
+/**
+ * \brief Checks state of disk
+ *
+ * \retval true if disk is ready, otherwise false and updates sense data
+ */
+static bool udi_msc_spc_testunitready_global(void);
+
+/**
+ * \brief Process test unit ready command
+ * Returns state of logical unit
+ */
+static void udi_msc_spc_testunitready(void);
+
+/**
+ * \brief Process prevent allow medium removal command
+ */
+static void udi_msc_spc_prevent_allow_medium_removal(void);
+
+/**
+ * \brief Process mode sense command
+ *
+ * \param b_sense10 Sense10 SCSI command, if true
+ * \param b_sense10 Sense6 SCSI command, if false
+ */
+static void udi_msc_spc_mode_sense(bool b_sense10);
+
+/**
+ * \brief Process start stop command
+ */
+static void udi_msc_sbc_start_stop(void);
+
+/**
+ * \brief Process read capacity command
+ */
+static void udi_msc_sbc_read_capacity(void);
+
+/**
+ * \brief Process read10 or write10 command
+ *
+ * \param b_read Read transfer, if true,
+ * \param b_read Write transfer, if false
+ */
+static void udi_msc_sbc_trans(bool b_read);
+//@}
+
+//@}
+
+
+bool udi_msc_enable(void)
+{
+ uint8_t lun;
+ udi_msc_b_trans_req = false;
+ udi_msc_b_cbw_invalid = false;
+ udi_msc_b_ack_trans = true;
+ udi_msc_b_reset_trans = true;
+ udi_msc_nb_lun = get_nb_lun();
+ if (0 == udi_msc_nb_lun)
+ return false; // No lun available, then not authorize to enable interface
+ udi_msc_nb_lun--;
+ // Call application callback
+ // to initialize memories or signal that interface is enabled
+ if (!UDI_MSC_ENABLE_EXT())
+ return false;
+ // Load the medium on each LUN
+ for (lun = 0; lun <= udi_msc_nb_lun; lun ++) {
+ mem_unload(lun, false);
+ }
+ // Start MSC process by CBW reception
+ udi_msc_cbw_wait();
+ return true;
+}
+
+
+void udi_msc_disable(void)
+{
+ udi_msc_b_trans_req = false;
+ udi_msc_b_ack_trans = true;
+ udi_msc_b_reset_trans = true;
+ UDI_MSC_DISABLE_EXT();
+}
+
+
+bool udi_msc_setup(void)
+{
+ if (Udd_setup_is_in()) {
+ // Requests Interface GET
+ if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
+ // Requests Class Interface Get
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_MSC_GET_MAX_LUN:
+ // Give the number of memories available
+ if (1 != udd_g_ctrlreq.req.wLength)
+ return false; // Error for USB host
+ if (0 != udd_g_ctrlreq.req.wValue)
+ return false;
+ udd_g_ctrlreq.payload = &udi_msc_nb_lun;
+ udd_g_ctrlreq.payload_size = 1;
+ return true;
+ }
+ }
+ }
+ if (Udd_setup_is_out()) {
+ // Requests Interface SET
+ if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
+ // Requests Class Interface Set
+ switch (udd_g_ctrlreq.req.bRequest) {
+ case USB_REQ_MSC_BULK_RESET:
+ // Reset MSC interface
+ if (0 != udd_g_ctrlreq.req.wLength)
+ return false;
+ if (0 != udd_g_ctrlreq.req.wValue)
+ return false;
+ udi_msc_b_cbw_invalid = false;
+ udi_msc_b_trans_req = false;
+ // Abort all tasks (transfer or clear stall wait) on endpoints
+ udd_ep_abort(UDI_MSC_EP_OUT);
+ udd_ep_abort(UDI_MSC_EP_IN);
+ // Restart by CBW wait
+ udi_msc_cbw_wait();
+ return true;
+ }
+ }
+ }
+ return false; // Not supported request
+}
+
+uint8_t udi_msc_getsetting(void)
+{
+ return 0; // MSC don't have multiple alternate setting
+}
+
+
+//---------------------------------------------
+//------- Routines to process CBW packet
+
+static void udi_msc_cbw_invalid(void)
+{
+ if (!udi_msc_b_cbw_invalid)
+ return; // Don't re-stall endpoint if error reseted by setup
+ udd_ep_set_halt(UDI_MSC_EP_OUT);
+ // If stall cleared then re-stall it. Only Setup MSC Reset can clear it
+ udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid);
+}
+
+static void udi_msc_csw_invalid(void)
+{
+ if (!udi_msc_b_cbw_invalid)
+ return; // Don't re-stall endpoint if error reseted by setup
+ udd_ep_set_halt(UDI_MSC_EP_IN);
+ // If stall cleared then re-stall it. Only Setup MSC Reset can clear it
+ udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid);
+}
+
+static void udi_msc_cbw_wait(void)
+{
+ // Register buffer and callback on OUT endpoint
+ if (!udd_ep_run(UDI_MSC_EP_OUT, true,
+ (uint8_t *) & udi_msc_cbw,
+ sizeof(udi_msc_cbw),
+ udi_msc_cbw_received)) {
+ // OUT endpoint not available (halted), then wait a clear of halt.
+ udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_wait);
+ }
+}
+
+
+static void udi_msc_cbw_received(udd_ep_status_t status,
+ iram_size_t nb_received, udd_ep_id_t ep)
+{
+ UNUSED(ep);
+ // Check status of transfer
+ if (UDD_EP_TRANSFER_OK != status) {
+ // Transfer aborted
+ // Now wait MSC setup reset to relaunch CBW reception
+ return;
+ }
+ // Check CBW integrity:
+ // transfer status/CBW length/CBW signature
+ if ((sizeof(udi_msc_cbw) != nb_received)
+ || (udi_msc_cbw.dCBWSignature !=
+ CPU_TO_BE32(USB_CBW_SIGNATURE))) {
+ // (5.2.1) Devices receiving a CBW with an invalid signature should stall
+ // further traffic on the Bulk In pipe, and either stall further traffic
+ // or accept and discard further traffic on the Bulk Out pipe, until
+ // reset recovery.
+ udi_msc_b_cbw_invalid = true;
+ udi_msc_cbw_invalid();
+ udi_msc_csw_invalid();
+ return;
+ }
+ // Check LUN asked
+ udi_msc_cbw.bCBWLUN &= USB_CBW_LUN_MASK;
+ if (udi_msc_cbw.bCBWLUN > udi_msc_nb_lun) {
+ // Bad LUN, then stop command process
+ udi_msc_sense_fail_cdb_invalid();
+ udi_msc_csw_process();
+ return;
+ }
+ // Prepare CSW residue field with the size requested
+ udi_msc_csw.dCSWDataResidue =
+ le32_to_cpu(udi_msc_cbw.dCBWDataTransferLength);
+
+ // Decode opcode
+ switch (udi_msc_cbw.CDB[0]) {
+ case SPC_REQUEST_SENSE:
+ udi_msc_spc_requestsense();
+ break;
+
+ case SPC_INQUIRY:
+ udi_msc_spc_inquiry();
+ break;
+
+ case SPC_MODE_SENSE6:
+ udi_msc_spc_mode_sense(false);
+ break;
+ case SPC_MODE_SENSE10:
+ udi_msc_spc_mode_sense(true);
+ break;
+
+ case SPC_TEST_UNIT_READY:
+ udi_msc_spc_testunitready();
+ break;
+
+ case SBC_READ_CAPACITY10:
+ udi_msc_sbc_read_capacity();
+ break;
+
+ case SBC_START_STOP_UNIT:
+ udi_msc_sbc_start_stop();
+ break;
+
+ // Accepts request to support plug/plug in case of card reader
+ case SPC_PREVENT_ALLOW_MEDIUM_REMOVAL:
+ udi_msc_spc_prevent_allow_medium_removal();
+ break;
+
+ // Accepts request to support full format from Windows
+ case SBC_VERIFY10:
+ udi_msc_sense_pass();
+ udi_msc_csw_process();
+ break;
+
+ case SBC_READ10:
+ udi_msc_sbc_trans(true);
+ break;
+
+ case SBC_WRITE10:
+ udi_msc_sbc_trans(false);
+ break;
+
+ default:
+ udi_msc_sense_command_invalid();
+ udi_msc_csw_process();
+ break;
+ }
+}
+
+
+static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag)
+{
+ /*
+ * The following cases should result in a phase error:
+ * - Case 2: Hn < Di
+ * - Case 3: Hn < Do
+ * - Case 7: Hi < Di
+ * - Case 8: Hi <> Do
+ * - Case 10: Ho <> Di
+ * - Case 13: Ho < Do
+ */
+ if (((udi_msc_cbw.bmCBWFlags ^ dir_flag) & USB_CBW_DIRECTION_IN)
+ || (udi_msc_csw.dCSWDataResidue < alloc_len)) {
+ udi_msc_sense_fail_cdb_invalid();
+ udi_msc_csw_process();
+ return false;
+ }
+
+ /*
+ * The following cases should result in a stall and nonzero
+ * residue:
+ * - Case 4: Hi > Dn
+ * - Case 5: Hi > Di
+ * - Case 9: Ho > Dn
+ * - Case 11: Ho > Do
+ */
+ return true;
+}
+
+
+//---------------------------------------------
+//------- Routines to process small data packet
+
+static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size)
+{
+ // Sends data on IN endpoint
+ if (!udd_ep_run(UDI_MSC_EP_IN, true,
+ buffer, buf_size, udi_msc_data_sent)) {
+ // If endpoint not available, then exit process command
+ udi_msc_sense_fail_hardware();
+ udi_msc_csw_process();
+ }
+}
+
+
+static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
+ udd_ep_id_t ep)
+{
+ UNUSED(ep);
+ if (UDD_EP_TRANSFER_OK != status) {
+ // Error protocol
+ // Now wait MSC setup reset to relaunch CBW reception
+ return;
+ }
+ // Update sense data
+ udi_msc_sense_pass();
+ // Update CSW
+ udi_msc_csw.dCSWDataResidue -= nb_sent;
+ udi_msc_csw_process();
+}
+
+
+//---------------------------------------------
+//------- Routines to process CSW packet
+
+static void udi_msc_csw_process(void)
+{
+ if (0 != udi_msc_csw.dCSWDataResidue) {
+ // Residue not NULL
+ // then STALL next request from USB host on corresponding endpoint
+ if (udi_msc_cbw.bmCBWFlags & USB_CBW_DIRECTION_IN)
+ udd_ep_set_halt(UDI_MSC_EP_IN);
+ else
+ udd_ep_set_halt(UDI_MSC_EP_OUT);
+ }
+ // Prepare and send CSW
+ udi_msc_csw.dCSWTag = udi_msc_cbw.dCBWTag;
+ udi_msc_csw.dCSWDataResidue = cpu_to_le32(udi_msc_csw.dCSWDataResidue);
+ udi_msc_csw_send();
+}
+
+
+void udi_msc_csw_send(void)
+{
+ // Sends CSW on IN endpoint
+ if (!udd_ep_run(UDI_MSC_EP_IN, false,
+ (uint8_t *) & udi_msc_csw,
+ sizeof(udi_msc_csw),
+ udi_msc_csw_sent)) {
+ // Endpoint not available
+ // then restart CSW sent when endpoint IN STALL will be cleared
+ udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_send);
+ }
+}
+
+
+static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
+ udd_ep_id_t ep)
+{
+ UNUSED(ep);
+ UNUSED(status);
+ UNUSED(nb_sent);
+ // CSW is sent or not
+ // In all case, restart process and wait CBW
+ udi_msc_cbw_wait();
+}
+
+
+//---------------------------------------------
+//------- Routines manage sense data
+
+static void udi_msc_clear_sense(void)
+{
+ memset((uint8_t*)&udi_msc_sense, 0, sizeof(struct scsi_request_sense_data));
+ udi_msc_sense.valid_reponse_code = SCSI_SENSE_VALID | SCSI_SENSE_CURRENT;
+ udi_msc_sense.AddSenseLen = SCSI_SENSE_ADDL_LEN(sizeof(udi_msc_sense));
+}
+
+static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
+ uint32_t lba)
+{
+ udi_msc_clear_sense();
+ udi_msc_csw.bCSWStatus = USB_CSW_STATUS_FAIL;
+ udi_msc_sense.sense_flag_key = sense_key;
+ udi_msc_sense.information[0] = lba >> 24;
+ udi_msc_sense.information[1] = lba >> 16;
+ udi_msc_sense.information[2] = lba >> 8;
+ udi_msc_sense.information[3] = lba;
+ udi_msc_sense.AddSenseCode = add_sense >> 8;
+ udi_msc_sense.AddSnsCodeQlfr = add_sense;
+}
+
+static void udi_msc_sense_pass(void)
+{
+ udi_msc_clear_sense();
+ udi_msc_csw.bCSWStatus = USB_CSW_STATUS_PASS;
+}
+
+
+static void udi_msc_sense_fail_not_present(void)
+{
+ udi_msc_sense_fail(SCSI_SK_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT, 0);
+}
+
+static void udi_msc_sense_fail_busy_or_change(void)
+{
+ udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION,
+ SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
+}
+
+static void udi_msc_sense_fail_hardware(void)
+{
+ udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR,
+ SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
+}
+
+static void udi_msc_sense_fail_protected(void)
+{
+ udi_msc_sense_fail(SCSI_SK_DATA_PROTECT, SCSI_ASC_WRITE_PROTECTED, 0);
+}
+
+static void udi_msc_sense_fail_cdb_invalid(void)
+{
+ udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
+ SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
+}
+
+static void udi_msc_sense_command_invalid(void)
+{
+ udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
+ SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
+}
+
+
+//---------------------------------------------
+//------- Routines manage SCSI Commands
+
+static void udi_msc_spc_requestsense(void)
+{
+ uint8_t length = udi_msc_cbw.CDB[4];
+
+ // Can't send more than sense data length
+ if (length > sizeof(udi_msc_sense))
+ length = sizeof(udi_msc_sense);
+
+ if (!udi_msc_cbw_validate(length, USB_CBW_DIRECTION_IN))
+ return;
+ // Send sense data
+ udi_msc_data_send((uint8_t*)&udi_msc_sense, length);
+}
+
+
+static void udi_msc_spc_inquiry(void)
+{
+ uint8_t length, i;
+ UDC_DATA(4)
+ // Constant inquiry data for all LUNs
+ static struct scsi_inquiry_data udi_msc_inquiry_data = {
+ .pq_pdt = SCSI_INQ_PQ_CONNECTED | SCSI_INQ_DT_DIR_ACCESS,
+ .version = SCSI_INQ_VER_SPC,
+ .flags3 = SCSI_INQ_RSP_SPC2,
+ .addl_len = SCSI_INQ_ADDL_LEN(sizeof(struct scsi_inquiry_data)),
+ .vendor_id = {UDI_MSC_GLOBAL_VENDOR_ID},
+ .product_rev = {UDI_MSC_GLOBAL_PRODUCT_VERSION},
+ };
+
+ length = udi_msc_cbw.CDB[4];
+
+ // Can't send more than inquiry data length
+ if (length > sizeof(udi_msc_inquiry_data))
+ length = sizeof(udi_msc_inquiry_data);
+
+ if (!udi_msc_cbw_validate(length, USB_CBW_DIRECTION_IN))
+ return;
+ if ((0 != (udi_msc_cbw.CDB[1] & (SCSI_INQ_REQ_EVPD | SCSI_INQ_REQ_CMDT)))
+ || (0 != udi_msc_cbw.CDB[2])) {
+ // CMDT and EPVD bits are not at 0
+ // PAGE or OPERATION CODE fields are not empty
+ // = No standard inquiry asked
+ udi_msc_sense_fail_cdb_invalid(); // Command is unsupported
+ udi_msc_csw_process();
+ return;
+ }
+
+ udi_msc_inquiry_data.flags1 = mem_removal(udi_msc_cbw.bCBWLUN) ?
+ SCSI_INQ_RMB : 0;
+
+ //* Fill product ID field
+ // Copy name in product id field
+ memcpy(udi_msc_inquiry_data.product_id,
+ mem_name(udi_msc_cbw.bCBWLUN)+1, // To remove first '"'
+ sizeof(udi_msc_inquiry_data.product_id));
+
+ // Search end of name '/0' or '"'
+ i = 0;
+ while (sizeof(udi_msc_inquiry_data.product_id) != i) {
+ if ((0 == udi_msc_inquiry_data.product_id[i])
+ || ('"' == udi_msc_inquiry_data.product_id[i])) {
+ break;
+ }
+ i++;
+ }
+ // Padding with space char
+ while (sizeof(udi_msc_inquiry_data.product_id) != i) {
+ udi_msc_inquiry_data.product_id[i] = ' ';
+ i++;
+ }
+
+ // Send inquiry data
+ udi_msc_data_send((uint8_t *) & udi_msc_inquiry_data, length);
+}
+
+
+static bool udi_msc_spc_testunitready_global(void)
+{
+ switch (mem_test_unit_ready(udi_msc_cbw.bCBWLUN)) {
+ case CTRL_GOOD:
+ return true; // Don't change sense data
+ case CTRL_BUSY:
+ udi_msc_sense_fail_busy_or_change();
+ break;
+ case CTRL_NO_PRESENT:
+ udi_msc_sense_fail_not_present();
+ break;
+ case CTRL_FAIL:
+ default:
+ udi_msc_sense_fail_hardware();
+ break;
+ }
+ return false;
+}
+
+
+static void udi_msc_spc_testunitready(void)
+{
+ if (udi_msc_spc_testunitready_global()) {
+ // LUN ready, then update sense data with status pass
+ udi_msc_sense_pass();
+ }
+ // Send status in CSW packet
+ udi_msc_csw_process();
+}
+
+
+static void udi_msc_spc_mode_sense(bool b_sense10)
+{
+ // Union of all mode sense structures
+ union sense_6_10 {
+ struct {
+ struct scsi_mode_param_header6 header;
+ struct spc_control_page_info_execpt sense_data;
+ } s6;
+ struct {
+ struct scsi_mode_param_header10 header;
+ struct spc_control_page_info_execpt sense_data;
+ } s10;
+ };
+
+ uint8_t data_sense_lgt;
+ uint8_t mode;
+ uint8_t request_lgt;
+ uint8_t wp;
+ struct spc_control_page_info_execpt *ptr_mode;
+ UDC_BSS(4) static union sense_6_10 sense;
+
+ // Clear all fields
+ memset(&sense, 0, sizeof(sense));
+
+ // Initialize process
+ if (b_sense10) {
+ request_lgt = udi_msc_cbw.CDB[8];
+ ptr_mode = &sense.s10.sense_data;
+ data_sense_lgt = sizeof(struct scsi_mode_param_header10);
+ } else {
+ request_lgt = udi_msc_cbw.CDB[4];
+ ptr_mode = &sense.s6.sense_data;
+ data_sense_lgt = sizeof(struct scsi_mode_param_header6);
+ }
+
+ // No Block descriptor
+
+ // Fill page(s)
+ mode = udi_msc_cbw.CDB[2] & SCSI_MS_MODE_ALL;
+ if ((SCSI_MS_MODE_INFEXP == mode)
+ || (SCSI_MS_MODE_ALL == mode)) {
+ // Informational exceptions control page (from SPC)
+ ptr_mode->page_code =
+ SCSI_MS_MODE_INFEXP;
+ ptr_mode->page_length =
+ SPC_MP_INFEXP_PAGE_LENGTH;
+ ptr_mode->mrie =
+ SPC_MP_INFEXP_MRIE_NO_SENSE;
+ data_sense_lgt += sizeof(struct spc_control_page_info_execpt);
+ }
+ // Can't send more than mode sense data length
+ if (request_lgt > data_sense_lgt)
+ request_lgt = data_sense_lgt;
+ if (!udi_msc_cbw_validate(request_lgt, USB_CBW_DIRECTION_IN))
+ return;
+
+ // Fill mode parameter header length
+ wp = (mem_wr_protect(udi_msc_cbw.bCBWLUN)) ? SCSI_MS_SBC_WP : 0;
+
+ if (b_sense10) {
+ sense.s10.header.mode_data_length =
+ cpu_to_be16((data_sense_lgt - 2));
+ //sense.s10.header.medium_type = 0;
+ sense.s10.header.device_specific_parameter = wp;
+ //sense.s10.header.block_descriptor_length = 0;
+ } else {
+ sense.s6.header.mode_data_length = data_sense_lgt - 1;
+ //sense.s6.header.medium_type = 0;
+ sense.s6.header.device_specific_parameter = wp;
+ //sense.s6.header.block_descriptor_length = 0;
+ }
+
+ // Send mode sense data
+ udi_msc_data_send((uint8_t *) & sense, request_lgt);
+}
+
+
+static void udi_msc_spc_prevent_allow_medium_removal(void)
+{
+ uint8_t prevent = udi_msc_cbw.CDB[4];
+ if (0 == prevent) {
+ udi_msc_sense_pass();
+ } else {
+ udi_msc_sense_fail_cdb_invalid(); // Command is unsupported
+ }
+ udi_msc_csw_process();
+}
+
+
+static void udi_msc_sbc_start_stop(void)
+{
+ bool start = 0x1 & udi_msc_cbw.CDB[4];
+ bool loej = 0x2 & udi_msc_cbw.CDB[4];
+ if (loej) {
+ mem_unload(udi_msc_cbw.bCBWLUN, !start);
+ }
+ udi_msc_sense_pass();
+ udi_msc_csw_process();
+}
+
+
+static void udi_msc_sbc_read_capacity(void)
+{
+ UDC_BSS(4) static struct sbc_read_capacity10_data udi_msc_capacity;
+
+ if (!udi_msc_cbw_validate(sizeof(udi_msc_capacity),
+ USB_CBW_DIRECTION_IN))
+ return;
+
+ // Get capacity of LUN
+ switch (mem_read_capacity(udi_msc_cbw.bCBWLUN,
+ &udi_msc_capacity.max_lba)) {
+ case CTRL_GOOD:
+ break;
+ case CTRL_BUSY:
+ udi_msc_sense_fail_busy_or_change();
+ udi_msc_csw_process();
+ return;
+ case CTRL_NO_PRESENT:
+ udi_msc_sense_fail_not_present();
+ udi_msc_csw_process();
+ return;
+ default:
+ udi_msc_sense_fail_hardware();
+ udi_msc_csw_process();
+ return;
+ }
+
+ // Format capacity data
+ udi_msc_capacity.block_len = CPU_TO_BE32(UDI_MSC_BLOCK_SIZE);
+ udi_msc_capacity.max_lba = cpu_to_be32(udi_msc_capacity.max_lba);
+ // Send the corresponding sense data
+ udi_msc_data_send((uint8_t *) & udi_msc_capacity,
+ sizeof(udi_msc_capacity));
+}
+
+
+static void udi_msc_sbc_trans(bool b_read)
+{
+ uint32_t trans_size;
+
+ if (!b_read) {
+ // Write operation then check Write Protect
+ if (mem_wr_protect(udi_msc_cbw.bCBWLUN)) {
+ // Write not authorized
+ udi_msc_sense_fail_protected();
+ udi_msc_csw_process();
+ return;
+ }
+ }
+ // Read/Write command fields (address and number of block)
+ MSB0(udi_msc_addr) = udi_msc_cbw.CDB[2];
+ MSB1(udi_msc_addr) = udi_msc_cbw.CDB[3];
+ MSB2(udi_msc_addr) = udi_msc_cbw.CDB[4];
+ MSB3(udi_msc_addr) = udi_msc_cbw.CDB[5];
+ MSB(udi_msc_nb_block) = udi_msc_cbw.CDB[7];
+ LSB(udi_msc_nb_block) = udi_msc_cbw.CDB[8];
+
+ // Compute number of byte to transfer and valid it
+ trans_size = (uint32_t) udi_msc_nb_block *UDI_MSC_BLOCK_SIZE;
+ if (!udi_msc_cbw_validate(trans_size,
+ (b_read) ? USB_CBW_DIRECTION_IN :
+ USB_CBW_DIRECTION_OUT))
+ return;
+
+ // Record transfer request to do it in a task and not under interrupt
+ udi_msc_b_read = b_read;
+ udi_msc_b_trans_req = true;
+ UDI_MSC_NOTIFY_TRANS_EXT();
+}
+
+
+bool udi_msc_process_trans(void)
+{
+ Ctrl_status status;
+
+ if (!udi_msc_b_trans_req)
+ return false; // No Transfer request to do
+ udi_msc_b_trans_req = false;
+ udi_msc_b_reset_trans = false;
+
+ // Start transfer
+ if (udi_msc_b_read) {
+ status = memory_2_usb(udi_msc_cbw.bCBWLUN, udi_msc_addr,
+ udi_msc_nb_block);
+ } else {
+ status = usb_2_memory(udi_msc_cbw.bCBWLUN, udi_msc_addr,
+ udi_msc_nb_block);
+ }
+
+ // Check if transfer is aborted by reset
+ if (udi_msc_b_reset_trans) {
+ udi_msc_b_reset_trans = false;
+ return true;
+ }
+
+ // Check status of transfer
+ switch (status) {
+ case CTRL_GOOD:
+ udi_msc_sense_pass();
+ break;
+ case CTRL_BUSY:
+ udi_msc_sense_fail_busy_or_change();
+ break;
+ case CTRL_NO_PRESENT:
+ udi_msc_sense_fail_not_present();
+ break;
+ default:
+ case CTRL_FAIL:
+ udi_msc_sense_fail_hardware();
+ break;
+ }
+ // Send status of transfer in CSW packet
+ udi_msc_csw_process();
+ return true;
+}
+
+
+static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n,
+ udd_ep_id_t ep)
+{
+ UNUSED(ep);
+ UNUSED(n);
+ // Update variable to signal the end of transfer
+ udi_msc_b_abort_trans = (UDD_EP_TRANSFER_OK != status) ? true : false;
+ udi_msc_b_ack_trans = true;
+}
+
+
+bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
+ void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep))
+{
+ if (!udi_msc_b_ack_trans)
+ return false; // No possible, transfer on going
+
+ // Start transfer Internal RAM<->USB line
+ udi_msc_b_ack_trans = false;
+ if (!udd_ep_run((b_read) ? UDI_MSC_EP_IN : UDI_MSC_EP_OUT,
+ false,
+ block,
+ block_size,
+ (NULL == callback) ? udi_msc_trans_ack :
+ callback)) {
+ udi_msc_b_ack_trans = true;
+ return false;
+ }
+ if (NULL == callback) {
+ while (!udi_msc_b_ack_trans);
+ if (udi_msc_b_abort_trans) {
+ return false;
+ }
+ udi_msc_csw.dCSWDataResidue -= block_size;
+ return (!udi_msc_b_abort_trans);
+ }
+ udi_msc_csw.dCSWDataResidue -= block_size;
+ return true;
+}
+
+//@}
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h
new file mode 100644
index 0000000000..7a76ad84fc
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/udi_msc.h
@@ -0,0 +1,376 @@
+/**
+ * \file
+ *
+ * \brief USB Device Mass Storage Class (MSC) interface definitions.
+ *
+ * Copyright (c) 2009-2016 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _UDI_MSC_H_
+#define _UDI_MSC_H_
+
+#include "conf_usb.h"
+#include "usb_protocol.h"
+#include "usb_protocol_msc.h"
+#include "udd.h"
+#include "udc_desc.h"
+#include "udi.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \addtogroup udi_msc_group_udc
+ * @{
+ */
+//! Global structure which contains standard UDI interface for UDC
+extern UDC_DESC_STORAGE udi_api_t udi_api_msc;
+//@}
+
+/**
+ * \ingroup udi_msc_group
+ * \defgroup udi_msc_group USB interface descriptors
+ *
+ * The following structures provide predefined USB interface descriptors.
+ * It must be used to define the final USB descriptors.
+ */
+//@{
+
+//! Interface descriptor structure for MSC
+typedef struct {
+ usb_iface_desc_t iface;
+ usb_ep_desc_t ep_in;
+ usb_ep_desc_t ep_out;
+} udi_msc_desc_t;
+
+//! By default no string associated to this interface
+#ifndef UDI_MSC_STRING_ID
+#define UDI_MSC_STRING_ID 0
+#endif
+
+//! MSC endpoints size for full speed
+#define UDI_MSC_EPS_SIZE_FS 64
+//! MSC endpoints size for high speed
+#define UDI_MSC_EPS_SIZE_HS 512
+
+//! Content of MSC interface descriptor for all speeds
+#define UDI_MSC_DESC \
+ .iface.bLength = sizeof(usb_iface_desc_t),\
+ .iface.bDescriptorType = USB_DT_INTERFACE,\
+ .iface.bInterfaceNumber = UDI_MSC_IFACE_NUMBER,\
+ .iface.bAlternateSetting = 0,\
+ .iface.bNumEndpoints = 2,\
+ .iface.bInterfaceClass = MSC_CLASS,\
+ .iface.bInterfaceSubClass = MSC_SUBCLASS_TRANSPARENT,\
+ .iface.bInterfaceProtocol = MSC_PROTOCOL_BULK,\
+ .iface.iInterface = UDI_MSC_STRING_ID,\
+ .ep_in.bLength = sizeof(usb_ep_desc_t),\
+ .ep_in.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_in.bEndpointAddress = UDI_MSC_EP_IN,\
+ .ep_in.bmAttributes = USB_EP_TYPE_BULK,\
+ .ep_in.bInterval = 0,\
+ .ep_out.bLength = sizeof(usb_ep_desc_t),\
+ .ep_out.bDescriptorType = USB_DT_ENDPOINT,\
+ .ep_out.bEndpointAddress = UDI_MSC_EP_OUT,\
+ .ep_out.bmAttributes = USB_EP_TYPE_BULK,\
+ .ep_out.bInterval = 0,
+
+//! Content of MSC interface descriptor for full speed only
+#define UDI_MSC_DESC_FS {\
+ UDI_MSC_DESC \
+ .ep_in.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\
+ .ep_out.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_FS),\
+ }
+
+//! Content of MSC interface descriptor for high speed only
+#define UDI_MSC_DESC_HS {\
+ UDI_MSC_DESC \
+ .ep_in.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_HS),\
+ .ep_out.wMaxPacketSize = LE16(UDI_MSC_EPS_SIZE_HS),\
+ }
+//@}
+
+
+/**
+ * \ingroup udi_group
+ * \defgroup udi_msc_group USB Device Interface (UDI) for Mass Storage Class (MSC)
+ *
+ * Common APIs used by high level application to use this USB class.
+ *
+ * These routines are used by memory to transfer its data
+ * to/from USB MSC endpoints.
+ *
+ * See \ref udi_msc_quickstart.
+ * @{
+ */
+
+/**
+ * \brief Process the background read/write commands
+ *
+ * Routine called by the main loop
+ */
+bool udi_msc_process_trans(void);
+
+/**
+ * \brief Transfers data to/from USB MSC endpoints
+ *
+ *
+ * \param b_read Memory to USB, if true
+ * \param block Buffer on Internal RAM to send or fill
+ * \param block_size Buffer size to send or fill
+ * \param callback Function to call at the end of transfer.
+ * If NULL then the routine exit when transfer is finish.
+ *
+ * \return \c 1 if function was successfully done, otherwise \c 0.
+ */
+bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
+ void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep));
+//@}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+/**
+ * \page udi_msc_quickstart Quick start guide for USB device Mass Storage module (UDI MSC)
+ *
+ * This is the quick start guide for the \ref udi_msc_group
+ * "USB device interface MSC module (UDI MSC)" with step-by-step instructions on
+ * how to configure and use the modules in a selection of use cases.
+ *
+ * The use cases contain several code fragments. The code fragments in the
+ * steps for setup can be copied into a custom initialization function, while
+ * the steps for usage can be copied into, e.g., the main application function.
+ *
+ * \section udi_msc_basic_use_case Basic use case
+ * In this basic use case, the "USB MSC (Single Interface Device)" module is used.
+ * The "USB MSC (Composite Device)" module usage is described in \ref udi_msc_use_cases
+ * "Advanced use cases".
+ *
+ * \section udi_msc_basic_use_case_setup Setup steps
+ * \subsection udi_msc_basic_use_case_setup_prereq Prerequisites
+ * \copydetails udc_basic_use_case_setup_prereq
+ * \subsection udi_msc_basic_use_case_setup_code Example code
+ * \copydetails udc_basic_use_case_setup_code
+ * \subsection udi_msc_basic_use_case_setup_flow Workflow
+ * \copydetails udc_basic_use_case_setup_flow
+ *
+ * \section udi_msc_basic_use_case_usage Usage steps
+ *
+ * \subsection udi_msc_basic_use_case_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC
+ #define UDI_MSC_GLOBAL_VENDOR_ID \
+ 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
+ #define UDI_MSC_GLOBAL_PRODUCT_VERSION \
+ '1', '.', '0', '0'
+ #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
+ extern bool my_callback_msc_enable(void);
+ #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
+ extern void my_callback_msc_disable(void);
+ #include "udi_msc_conf.h" // At the end of conf_usb.h file
+\endcode
+ *
+ * Add to application C-file:
+ * \code
+ static bool my_flag_autorize_msc_transfert = false;
+ bool my_callback_msc_enable(void)
+ {
+ my_flag_autorize_msc_transfert = true;
+ return true;
+ }
+ void my_callback_msc_disable(void)
+ {
+ my_flag_autorize_msc_transfert = false;
+ }
+
+ void task(void)
+ {
+ udi_msc_process_trans();
+ }
+\endcode
+ *
+ * \subsection udi_msc_basic_use_case_setup_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following configuration,
+ * which is the USB device MSC configuration:
+ * - \code #define USB_DEVICE_SERIAL_NAME "12...EF" // Disk SN for MSC \endcode
+ * \note The USB serial number is mandatory when a MSC interface is used.
+ * - \code //! Vendor name and Product version of MSC interface
+ #define UDI_MSC_GLOBAL_VENDOR_ID \
+ 'A', 'T', 'M', 'E', 'L', ' ', ' ', ' '
+ #define UDI_MSC_GLOBAL_PRODUCT_VERSION \
+ '1', '.', '0', '0' \endcode
+ * \note The USB MSC interface requires a vendor ID (8 ASCII characters)
+ * and a product version (4 ASCII characters).
+ * - \code #define UDI_MSC_ENABLE_EXT() my_callback_msc_enable()
+ extern bool my_callback_msc_enable(void); \endcode
+ * \note After the device enumeration (detecting and identifying USB devices),
+ * the USB host starts the device configuration. When the USB MSC interface
+ * from the device is accepted by the host, the USB host enables this interface and the
+ * UDI_MSC_ENABLE_EXT() callback function is called and return true.
+ * Thus, when this event is received, the tasks which call
+ * udi_msc_process_trans() must be enabled.
+ * - \code #define UDI_MSC_DISABLE_EXT() my_callback_msc_disable()
+ extern void my_callback_msc_disable(void); \endcode
+ * \note When the USB device is unplugged or is reset by the USB host, the USB
+ * interface is disabled and the UDI_MSC_DISABLE_EXT() callback function
+ * is called. Thus, it is recommended to disable the task which is called udi_msc_process_trans().
+ * -# The MSC is automatically linked with memory control access component
+ * which provides the memories interfaces. However, the memory data transfers
+ * must be done outside USB interrupt routine. This is done in the MSC process
+ * ("udi_msc_process_trans()") called by main loop:
+ * - \code * void task(void) {
+ udi_msc_process_trans();
+ } \endcode
+ * -# The MSC speed depends on task periodicity. To get the best speed
+ * the notification callback "UDI_MSC_NOTIFY_TRANS_EXT" can be used to wakeup
+ * this task (Example, through a mutex):
+ * - \code #define UDI_MSC_NOTIFY_TRANS_EXT() msc_notify_trans()
+ void msc_notify_trans(void) {
+ wakeup_my_task();
+ } \endcode
+ *
+ * \section udi_msc_use_cases Advanced use cases
+ * For more advanced use of the UDI MSC module, see the following use cases:
+ * - \subpage udi_msc_use_case_composite
+ * - \subpage udc_use_case_1
+ * - \subpage udc_use_case_2
+ * - \subpage udc_use_case_3
+ * - \subpage udc_use_case_5
+ * - \subpage udc_use_case_6
+ */
+
+/**
+ * \page udi_msc_use_case_composite MSC in a composite device
+ *
+ * A USB Composite Device is a USB Device which uses more than one USB class.
+ * In this use case, the "USB MSC (Composite Device)" module is used to
+ * create a USB composite device. Thus, this USB module can be associated with
+ * another "Composite Device" module, like "USB HID Mouse (Composite Device)".
+ *
+ * Also, you can refer to application note
+ *
+ * AVR4902 ASF - USB Composite Device.
+ *
+ * \section udi_msc_use_case_composite_setup Setup steps
+ * For the setup code of this use case to work, the
+ * \ref udi_msc_basic_use_case "basic use case" must be followed.
+ *
+ * \section udi_msc_use_case_composite_usage Usage steps
+ *
+ * \subsection udi_msc_use_case_composite_usage_code Example code
+ * Content of conf_usb.h:
+ * \code
+ #define USB_DEVICE_EP_CTRL_SIZE 64
+ #define USB_DEVICE_NB_INTERFACE (X+1)
+ #define USB_DEVICE_MAX_EP (X+2)
+
+ #define UDI_MSC_EP_IN (X | USB_EP_DIR_IN)
+ #define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT)
+ #define UDI_MSC_IFACE_NUMBER X
+
+ #define UDI_COMPOSITE_DESC_T \
+ udi_msc_desc_t udi_msc; \
+ ...
+ #define UDI_COMPOSITE_DESC_FS \
+ .udi_msc = UDI_MSC_DESC, \
+ ...
+ #define UDI_COMPOSITE_DESC_HS \
+ .udi_msc = UDI_MSC_DESC, \
+ ...
+ #define UDI_COMPOSITE_API \
+ &udi_api_msc, \
+ ...
+\endcode
+ *
+ * \subsection udi_msc_use_case_composite_usage_flow Workflow
+ * -# Ensure that conf_usb.h is available and contains the following parameters
+ * required for a USB composite device configuration:
+ * - \code // Endpoint control size, This must be:
+ // - 8, 16, 32 or 64 for full speed device (8 is recommended to save RAM)
+ // - 64 for a high speed device
+ #define USB_DEVICE_EP_CTRL_SIZE 64
+ // Total Number of interfaces on this USB device.
+ // Add 1 for MSC.
+ #define USB_DEVICE_NB_INTERFACE (X+1)
+ // Total number of endpoints on this USB device.
+ // This must include each endpoint for each interface.
+ // Add 2 for MSC.
+ #define USB_DEVICE_MAX_EP (X+2) \endcode
+ * -# Ensure that conf_usb.h contains the description of
+ * composite device:
+ * - \code // The endpoint numbers chosen by you for the MSC.
+ // The endpoint numbers starting from 1.
+ #define UDI_MSC_EP_IN (X | USB_EP_DIR_IN)
+ #define UDI_MSC_EP_OUT (Y | USB_EP_DIR_OUT)
+ // The interface index of an interface starting from 0
+ #define UDI_MSC_IFACE_NUMBER X \endcode
+ * -# Ensure that conf_usb.h contains the following parameters
+ * required for a USB composite device configuration:
+ * - \code // USB Interfaces descriptor structure
+ #define UDI_COMPOSITE_DESC_T \
+ ...
+ udi_msc_desc_t udi_msc; \
+ ...
+ // USB Interfaces descriptor value for Full Speed
+ #define UDI_COMPOSITE_DESC_FS \
+ ...
+ .udi_msc = UDI_MSC_DESC_FS, \
+ ...
+ // USB Interfaces descriptor value for High Speed
+ #define UDI_COMPOSITE_DESC_HS \
+ ...
+ .udi_msc = UDI_MSC_DESC_HS, \
+ ...
+ // USB Interface APIs
+ #define UDI_COMPOSITE_API \
+ ...
+ &udi_api_msc, \
+ ... \endcode
+ * - \note The descriptors order given in the four lists above must be the
+ * same as the order defined by all interface indexes. The interface index
+ * orders are defined through UDI_X_IFACE_NUMBER defines.
+ */
+
+#endif // _UDI_MSC_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c b/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c
new file mode 100644
index 0000000000..0853a4af0c
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.c
@@ -0,0 +1,2073 @@
+/**
+ * \file
+ *
+ * \brief USB Device Driver for UOTGHS. Compliant with common UDD driver.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "compiler.h"
+#include "uotghs_device_due.h"
+
+#include "conf_usb.h"
+#include "sysclk.h"
+#include "udd.h"
+#include "uotghs_otg.h"
+#include
+
+#ifndef UDD_NO_SLEEP_MGR
+# include "sleep.h"
+# include "sleepmgr.h"
+#endif
+
+#if !(SAM3XA)
+# error The current UOTGHS Device Driver supports only SAM3X and SAM3A.
+#endif
+#ifndef UDD_USB_INT_FUN
+# define UDD_USB_INT_FUN UOTGHS_Handler
+#endif
+
+#ifndef UDD_USB_INT_LEVEL
+# define UDD_USB_INT_LEVEL 5 // By default USB interrupt have low priority
+#endif
+
+#define UDD_EP_USED(ep) (USB_DEVICE_MAX_EP >= ep)
+
+#if ( (UDD_EP_USED( 1) && Is_udd_endpoint_dma_supported( 1)) \
+ ||(UDD_EP_USED( 2) && Is_udd_endpoint_dma_supported( 2)) \
+ ||(UDD_EP_USED( 3) && Is_udd_endpoint_dma_supported( 3)) \
+ ||(UDD_EP_USED( 4) && Is_udd_endpoint_dma_supported( 4)) \
+ ||(UDD_EP_USED( 5) && Is_udd_endpoint_dma_supported( 5)) \
+ ||(UDD_EP_USED( 6) && Is_udd_endpoint_dma_supported( 6)) \
+ ||(UDD_EP_USED( 7) && Is_udd_endpoint_dma_supported( 7)) \
+ ||(UDD_EP_USED( 8) && Is_udd_endpoint_dma_supported( 8)) \
+ ||(UDD_EP_USED( 9) && Is_udd_endpoint_dma_supported( 9)) \
+ ||(UDD_EP_USED(10) && Is_udd_endpoint_dma_supported(10)) \
+ ||(UDD_EP_USED(11) && Is_udd_endpoint_dma_supported(11)) \
+ ||(UDD_EP_USED(12) && Is_udd_endpoint_dma_supported(12)) \
+ ||(UDD_EP_USED(13) && Is_udd_endpoint_dma_supported(13)) \
+ ||(UDD_EP_USED(14) && Is_udd_endpoint_dma_supported(14)) \
+ ||(UDD_EP_USED(15) && Is_udd_endpoint_dma_supported(15)) \
+ )
+# define UDD_EP_DMA_SUPPORTED
+#endif
+
+#if ( (UDD_EP_USED( 1) && !Is_udd_endpoint_dma_supported( 1)) \
+ ||(UDD_EP_USED( 2) && !Is_udd_endpoint_dma_supported( 2)) \
+ ||(UDD_EP_USED( 3) && !Is_udd_endpoint_dma_supported( 3)) \
+ ||(UDD_EP_USED( 4) && !Is_udd_endpoint_dma_supported( 4)) \
+ ||(UDD_EP_USED( 5) && !Is_udd_endpoint_dma_supported( 5)) \
+ ||(UDD_EP_USED( 6) && !Is_udd_endpoint_dma_supported( 6)) \
+ ||(UDD_EP_USED( 7) && !Is_udd_endpoint_dma_supported( 7)) \
+ ||(UDD_EP_USED( 8) && !Is_udd_endpoint_dma_supported( 8)) \
+ ||(UDD_EP_USED( 9) && !Is_udd_endpoint_dma_supported( 9)) \
+ ||(UDD_EP_USED(10) && !Is_udd_endpoint_dma_supported(10)) \
+ ||(UDD_EP_USED(11) && !Is_udd_endpoint_dma_supported(11)) \
+ ||(UDD_EP_USED(12) && !Is_udd_endpoint_dma_supported(12)) \
+ ||(UDD_EP_USED(13) && !Is_udd_endpoint_dma_supported(13)) \
+ ||(UDD_EP_USED(14) && !Is_udd_endpoint_dma_supported(14)) \
+ ||(UDD_EP_USED(15) && !Is_udd_endpoint_dma_supported(15)) \
+ )
+# define UDD_EP_FIFO_SUPPORTED
+#endif
+
+// for debug text
+//#define dbg_print printf
+#define dbg_print(...)
+
+/**
+ * \ingroup udd_group
+ * \defgroup udd_udphs_group USB On-The-Go High-Speed Port for device mode (UOTGHS)
+ *
+ * \section UOTGHS_CONF UOTGHS Custom configuration
+ * The following UOTGHS driver configuration must be included in the conf_usb.h
+ * file of the application.
+ *
+ * UDD_USB_INT_LEVEL
+ * Option to change the interrupt priority (0 to 15) by default 5 (recommended).
+ *
+ * UDD_USB_INT_FUN
+ * Option to fit interrupt function to what defined in exception table.
+ *
+ * UDD_ISOCHRONOUS_NB_BANK(ep)
+ * Feature to reduce or increase isochronous endpoints buffering (1 to 3).
+ * Default value 2.
+ *
+ * UDD_BULK_NB_BANK(ep)
+ * Feature to reduce or increase bulk endpoints buffering (1 to 2).
+ * Default value 2.
+ *
+ * UDD_INTERRUPT_NB_BANK(ep)
+ * Feature to reduce or increase interrupt endpoints buffering (1 to 2).
+ * Default value 1.
+ *
+ * \section Callbacks management
+ * The USB driver is fully managed by interrupt and does not request periodique
+ * task. Thereby, the USB events use callbacks to transfer the information.
+ * The callbacks are declared in static during compilation or in variable during
+ * code execution.
+ *
+ * Static declarations defined in conf_usb.h:
+ * - UDC_VBUS_EVENT(bool b_present)
+ * To signal Vbus level change
+ * - UDC_SUSPEND_EVENT()
+ * Called when USB bus enter in suspend mode
+ * - UDC_RESUME_EVENT()
+ * Called when USB bus is wakeup
+ * - UDC_SOF_EVENT()
+ * Called for each received SOF, Note: Each 1ms in HS/FS mode only.
+ *
+ * Dynamic callbacks, called "endpoint job" , are registered
+ * in udd_ep_job_t structure via the following functions:
+ * - udd_ep_run()
+ * To call it when a transfer is finish
+ * - udd_ep_wait_stall_clear()
+ * To call it when a endpoint halt is disabled
+ *
+ * \section Power mode management
+ * The Sleep modes authorized :
+ * - in USB IDLE state, the UOTGHS needs of USB clock and authorizes up to sleep mode WFI.
+ * - in USB SUSPEND state, the UOTGHS no needs USB clock and authorizes up to sleep mode WAIT.
+ * @{
+ */
+
+// Check USB Device configuration
+#ifndef USB_DEVICE_EP_CTRL_SIZE
+# error USB_DEVICE_EP_CTRL_SIZE not defined
+#endif
+#ifndef USB_DEVICE_MAX_EP
+# error USB_DEVICE_MAX_EP not defined
+#endif
+
+// Note: USB_DEVICE_MAX_EP does not include control endpoint
+#if USB_DEVICE_MAX_EP > (UDD_MAX_PEP_NB-1)
+# error USB_DEVICE_MAX_EP is too high and not supported by this part
+#endif
+
+#define UDD_EP_ISO_NBANK_ERROR(ep) \
+ ( (UDD_ISOCHRONOUS_NB_BANK(ep) < 1) \
+ || (UDD_ISOCHRONOUS_NB_BANK(ep) > 3) )
+#define UDD_EP_BULK_NBANK_ERROR(ep) \
+ ( (UDD_BULK_NB_BANK(ep) < 1) || (UDD_BULK_NB_BANK(ep) > 2) )
+#define UDD_EP_INT_NBANK_ERROR(ep) \
+ ( (UDD_INTERRUPT_NB_BANK(ep) < 1) || (UDD_INTERRUPT_NB_BANK(ep) > 2) )
+
+#define UDD_EP_ISO_NB_BANK_ERROR(ep) \
+ (UDD_EP_USED(ep) && UDD_EP_ISO_NBANK_ERROR(ep))
+#define UDD_EP_BULK_NB_BANK_ERROR(ep) \
+ (UDD_EP_USED(ep) && UDD_EP_ISO_NBANK_ERROR(ep))
+#define UDD_EP_INT_NB_BANK_ERROR(ep) \
+ (UDD_EP_USED(ep) && UDD_EP_ISO_NBANK_ERROR(ep))
+
+#define UDD_EP_NB_BANK_ERROR(ep, type) \
+ (ATPASTE3(UDD_EP_, type, _NB_BANK_ERROR(ep)))
+
+#define UDD_ISO_NB_BANK_ERROR \
+ ( UDD_EP_NB_BANK_ERROR( 1, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 2, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 3, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 4, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 5, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 6, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 7, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 8, ISO) \
+ || UDD_EP_NB_BANK_ERROR( 9, ISO) \
+ || UDD_EP_NB_BANK_ERROR(10, ISO) \
+ || UDD_EP_NB_BANK_ERROR(11, ISO) \
+ || UDD_EP_NB_BANK_ERROR(12, ISO) \
+ || UDD_EP_NB_BANK_ERROR(13, ISO) \
+ || UDD_EP_NB_BANK_ERROR(14, ISO) \
+ || UDD_EP_NB_BANK_ERROR(15, ISO) )
+#define UDD_BULK_NB_BANK_ERROR \
+ ( UDD_EP_NB_BANK_ERROR( 1, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 2, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 3, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 4, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 5, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 6, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 7, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 8, BULK) \
+ || UDD_EP_NB_BANK_ERROR( 9, BULK) \
+ || UDD_EP_NB_BANK_ERROR(10, BULK) \
+ || UDD_EP_NB_BANK_ERROR(11, BULK) \
+ || UDD_EP_NB_BANK_ERROR(12, BULK) \
+ || UDD_EP_NB_BANK_ERROR(13, BULK) \
+ || UDD_EP_NB_BANK_ERROR(14, BULK) \
+ || UDD_EP_NB_BANK_ERROR(15, BULK) )
+#define UDD_INTERRUPT_NB_BANK_ERROR \
+ ( UDD_EP_NB_BANK_ERROR( 1, INT) \
+ || UDD_EP_NB_BANK_ERROR( 2, INT) \
+ || UDD_EP_NB_BANK_ERROR( 3, INT) \
+ || UDD_EP_NB_BANK_ERROR( 4, INT) \
+ || UDD_EP_NB_BANK_ERROR( 5, INT) \
+ || UDD_EP_NB_BANK_ERROR( 6, INT) \
+ || UDD_EP_NB_BANK_ERROR( 7, INT) \
+ || UDD_EP_NB_BANK_ERROR( 8, INT) \
+ || UDD_EP_NB_BANK_ERROR( 9, INT) \
+ || UDD_EP_NB_BANK_ERROR(10, INT) \
+ || UDD_EP_NB_BANK_ERROR(11, INT) \
+ || UDD_EP_NB_BANK_ERROR(12, INT) \
+ || UDD_EP_NB_BANK_ERROR(13, INT) \
+ || UDD_EP_NB_BANK_ERROR(14, INT) \
+ || UDD_EP_NB_BANK_ERROR(15, INT) )
+
+#ifndef UDD_ISOCHRONOUS_NB_BANK
+# define UDD_ISOCHRONOUS_NB_BANK(ep) 2
+#else
+# if UDD_ISO_NB_BANK_ERROR
+# error UDD_ISOCHRONOUS_NB_BANK(ep) must be define within 1 to 3.
+# endif
+#endif
+
+#ifndef UDD_BULK_NB_BANK
+# define UDD_BULK_NB_BANK(ep) 2
+#else
+# if UDD_BULK_NB_BANK_ERROR
+# error UDD_BULK_NB_BANK must be define with 1 or 2.
+# endif
+#endif
+
+#ifndef UDD_INTERRUPT_NB_BANK
+# define UDD_INTERRUPT_NB_BANK(ep) 1
+#else
+# if UDD_INTERRUPT_NB_BANK_ERROR
+# error UDD_INTERRUPT_NB_BANK must be define with 1 or 2.
+# endif
+#endif
+
+
+/**
+ * \name Power management routine.
+ */
+//@{
+
+#ifndef UDD_NO_SLEEP_MGR
+
+//! Definition of sleep levels
+#define UOTGHS_SLEEP_MODE_USB_SUSPEND SLEEPMGR_WAIT_FAST
+#define UOTGHS_SLEEP_MODE_USB_IDLE SLEEPMGR_SLEEP_WFI
+
+//! State of USB line
+static bool udd_b_idle;
+//! State of sleep manager
+static bool udd_b_sleep_initialized = false;
+
+
+/*! \brief Authorize or not the CPU powerdown mode
+ *
+ * \param b_enable true to authorize idle mode
+ */
+static void udd_sleep_mode(bool b_idle)
+{
+ if (!b_idle && udd_b_idle) {
+ dbg_print("_S ");
+ sleepmgr_unlock_mode(UOTGHS_SLEEP_MODE_USB_IDLE);
+ }
+ if (b_idle && !udd_b_idle) {
+ dbg_print("_W ");
+ sleepmgr_lock_mode(UOTGHS_SLEEP_MODE_USB_IDLE);
+ }
+ udd_b_idle = b_idle;
+}
+#else
+
+static void udd_sleep_mode(bool b_idle)
+{
+ b_idle = b_idle;
+}
+
+#endif // UDD_NO_SLEEP_MGR
+
+//@}
+
+
+/**
+ * \name Control endpoint low level management routine.
+ *
+ * This function performs control endpoint mangement.
+ * It handle the SETUP/DATA/HANDSHAKE phases of a control transaction.
+ */
+//@{
+
+//! Global variable to give and record information about setup request management
+COMPILER_WORD_ALIGNED udd_ctrl_request_t udd_g_ctrlreq;
+
+//! Bit definitions about endpoint control state machine for udd_ep_control_state
+typedef enum {
+ UDD_EPCTRL_SETUP = 0, //!< Wait a SETUP packet
+ UDD_EPCTRL_DATA_OUT = 1, //!< Wait a OUT data packet
+ UDD_EPCTRL_DATA_IN = 2, //!< Wait a IN data packet
+ UDD_EPCTRL_HANDSHAKE_WAIT_IN_ZLP = 3, //!< Wait a IN ZLP packet
+ UDD_EPCTRL_HANDSHAKE_WAIT_OUT_ZLP = 4, //!< Wait a OUT ZLP packet
+ UDD_EPCTRL_STALL_REQ = 5, //!< STALL enabled on IN & OUT packet
+} udd_ctrl_ep_state_t;
+
+//! State of the endpoint control management
+static udd_ctrl_ep_state_t udd_ep_control_state;
+
+//! Total number of data received/sent during data packet phase with previous payload buffers
+static uint16_t udd_ctrl_prev_payload_buf_cnt;
+
+//! Number of data received/sent to/from udd_g_ctrlreq.payload buffer
+static uint16_t udd_ctrl_payload_buf_cnt;
+
+/**
+ * \brief Reset control endpoint
+ *
+ * Called after a USB line reset or when UDD is enabled
+ */
+static void udd_reset_ep_ctrl(void);
+
+/**
+ * \brief Reset control endpoint management
+ *
+ * Called after a USB line reset or at the end of SETUP request (after ZLP)
+ */
+static void udd_ctrl_init(void);
+
+//! \brief Managed reception of SETUP packet on control endpoint
+static void udd_ctrl_setup_received(void);
+
+//! \brief Managed reception of IN packet on control endpoint
+static void udd_ctrl_in_sent(void);
+
+//! \brief Managed reception of OUT packet on control endpoint
+static void udd_ctrl_out_received(void);
+
+//! \brief Managed underflow event of IN packet on control endpoint
+static void udd_ctrl_underflow(void);
+
+//! \brief Managed overflow event of OUT packet on control endpoint
+static void udd_ctrl_overflow(void);
+
+//! \brief Managed stall event of IN/OUT packet on control endpoint
+static void udd_ctrl_stall_data(void);
+
+//! \brief Send a ZLP IN on control endpoint
+static void udd_ctrl_send_zlp_in(void);
+
+//! \brief Send a ZLP OUT on control endpoint
+static void udd_ctrl_send_zlp_out(void);
+
+//! \brief Call callback associated to setup request
+static void udd_ctrl_endofrequest(void);
+
+
+/**
+ * \brief Main interrupt routine for control endpoint
+ *
+ * This switchs control endpoint events to correct sub function.
+ *
+ * \return \c 1 if an event about control endpoint is occured, otherwise \c 0.
+ */
+static bool udd_ctrl_interrupt(void);
+
+//@}
+
+
+/**
+ * \name Management of bulk/interrupt/isochronous endpoints
+ *
+ * The UDD manages the data transfer on endpoints:
+ * - Start data tranfer on endpoint with USB Device DMA
+ * - Send a ZLP packet if requested
+ * - Call callback registered to signal end of transfer
+ * The transfer abort and stall feature are supported.
+ */
+//@{
+#if (0!=USB_DEVICE_MAX_EP)
+
+//! Structure definition about job registered on an endpoint
+typedef struct {
+ union {
+ //! Callback to call at the end of transfer
+ udd_callback_trans_t call_trans;
+
+ //! Callback to call when the endpoint halt is cleared
+ udd_callback_halt_cleared_t call_nohalt;
+ };
+ //! Buffer located in internal RAM to send or fill during job
+ uint8_t *buf;
+ //! Size of buffer to send or fill
+ iram_size_t buf_size;
+ //!< Size of data transfered
+ iram_size_t buf_cnt;
+ //!< Size of data loaded (or prepared for DMA) last time
+ iram_size_t buf_load;
+ //! A job is registered on this endpoint
+ uint8_t busy:1;
+ //! A short packet is requested for this job on endpoint IN
+ uint8_t b_shortpacket:1;
+ //! A stall has been requested but not executed
+ uint8_t stall_requested:1;
+} udd_ep_job_t;
+
+
+//! Array to register a job on bulk/interrupt/isochronous endpoint
+static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];
+
+//! \brief Reset all job table
+static void udd_ep_job_table_reset(void);
+
+//! \brief Abort all endpoint jobs on going
+static void udd_ep_job_table_kill(void);
+
+#ifdef UDD_EP_FIFO_SUPPORTED
+ /**
+ * \brief Fill banks and send them
+ *
+ * \param ep endpoint number of job to abort
+ */
+ static void udd_ep_in_sent(udd_ep_id_t ep);
+
+ /**
+ * \brief Store received banks
+ *
+ * \param ep endpoint number of job to abort
+ */
+ static void udd_ep_out_received(udd_ep_id_t ep);
+#endif
+
+/**
+ * \brief Abort endpoint job on going
+ *
+ * \param ep endpoint number of job to abort
+ */
+static void udd_ep_abort_job(udd_ep_id_t ep);
+
+/**
+ * \brief Call the callback associated to the job which is finished
+ *
+ * \param ptr_job job to complete
+ * \param b_abort if true then the job has been aborted
+ */
+static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num);
+
+#ifdef UDD_EP_DMA_SUPPORTED
+ /**
+ * \brief Start the next transfer if necessary or complet the job associated.
+ *
+ * \param ep endpoint number without direction flag
+ */
+ static void udd_ep_trans_done(udd_ep_id_t ep);
+#endif
+
+/**
+ * \brief Main interrupt routine for bulk/interrupt/isochronous endpoints
+ *
+ * This switchs endpoint events to correct sub function.
+ *
+ * \return \c 1 if an event about bulk/interrupt/isochronous endpoints has occured, otherwise \c 0.
+ */
+static bool udd_ep_interrupt(void);
+
+#endif // (0!=USB_DEVICE_MAX_EP)
+//@}
+
+
+//--------------------------------------------------------
+//--- INTERNAL ROUTINES TO MANAGED GLOBAL EVENTS
+
+/**
+ * \internal
+ * \brief Function called by UOTGHS interrupt to manage USB Device interrupts
+ *
+ * USB Device interrupt events are splited in three parts:
+ * - USB line events (SOF, reset, suspend, resume, wakeup)
+ * - control endpoint events (setup reception, end of data transfer, underflow, overflow, stall)
+ * - bulk/interrupt/isochronous endpoints events (end of data transfer)
+ *
+ * Note:
+ * Here, the global interrupt mask is not clear when an USB interrupt is enabled
+ * because this one can not be occured during the USB ISR (=during INTX is masked).
+ * See Technical reference $3.8.3 Masking interrupt requests in peripheral modules.
+ */
+#ifdef UHD_ENABLE
+void udd_interrupt(void);
+void udd_interrupt(void)
+#else
+ISR(UDD_USB_INT_FUN)
+#endif
+{
+ /* For fast wakeup clocks restore
+ * In WAIT mode, clocks are switched to FASTRC.
+ * After wakeup clocks should be restored, before that ISR should not
+ * be served.
+ */
+ if (!pmc_is_wakeup_clocks_restored() && !Is_udd_suspend()) {
+ cpu_irq_disable();
+ return;
+ }
+
+ if (Is_udd_sof()) {
+ udd_ack_sof();
+ if (Is_udd_full_speed_mode()) {
+ udc_sof_notify();
+ }
+#ifdef UDC_SOF_EVENT
+ UDC_SOF_EVENT();
+#endif
+ goto udd_interrupt_sof_end;
+ }
+
+ if (Is_udd_msof()) {
+ udd_ack_msof();
+ udc_sof_notify();
+ goto udd_interrupt_sof_end;
+ }
+
+ dbg_print("%c ", udd_is_high_speed() ? 'H' : 'F');
+
+ if (udd_ctrl_interrupt()) {
+ goto udd_interrupt_end; // Interrupt acked by control endpoint managed
+ }
+
+#if (0 != USB_DEVICE_MAX_EP)
+ if (udd_ep_interrupt()) {
+ goto udd_interrupt_end; // Interrupt acked by bulk/interrupt/isochronous endpoint managed
+ }
+#endif
+
+ // USB bus reset detection
+ if (Is_udd_reset()) {
+ udd_ack_reset();
+ dbg_print("RST ");
+ // Abort all jobs on-going
+#if (USB_DEVICE_MAX_EP != 0)
+ udd_ep_job_table_kill();
+#endif
+ // Reset USB Device Stack Core
+ udc_reset();
+ // Reset endpoint control
+ udd_reset_ep_ctrl();
+ // Reset endpoint control management
+ udd_ctrl_init();
+ goto udd_interrupt_end;
+ }
+
+ if (Is_udd_suspend_interrupt_enabled() && Is_udd_suspend()) {
+ otg_unfreeze_clock();
+ // The suspend interrupt is automatic acked when a wakeup occur
+ udd_disable_suspend_interrupt();
+ udd_enable_wake_up_interrupt();
+ otg_freeze_clock(); // Mandatory to exit of sleep mode after a wakeup event
+ udd_sleep_mode(false); // Enter in SUSPEND mode
+#ifdef UDC_SUSPEND_EVENT
+ UDC_SUSPEND_EVENT();
+#endif
+ goto udd_interrupt_end;
+ }
+
+ if (Is_udd_wake_up_interrupt_enabled() && Is_udd_wake_up()) {
+ // Ack wakeup interrupt and enable suspend interrupt
+ otg_unfreeze_clock();
+ // Check USB clock ready after suspend and eventually sleep USB clock
+ while (!Is_otg_clock_usable()) {
+ if (Is_udd_suspend()) {
+ break; // In case of USB state change in HS
+ }
+ };
+ // The wakeup interrupt is automatic acked when a suspend occur
+ udd_disable_wake_up_interrupt();
+ udd_enable_suspend_interrupt();
+ udd_sleep_mode(true); // Enter in IDLE mode
+#ifdef UDC_RESUME_EVENT
+ UDC_RESUME_EVENT();
+#endif
+ goto udd_interrupt_end;
+ }
+
+ if (Is_otg_vbus_transition()) {
+ dbg_print("VBus ");
+ // Ack Vbus transition and send status to high level
+ otg_unfreeze_clock();
+ otg_ack_vbus_transition();
+ otg_freeze_clock();
+#ifndef USB_DEVICE_ATTACH_AUTO_DISABLE
+ if (Is_otg_vbus_high()) {
+ udd_attach();
+ } else {
+ udd_detach();
+ }
+#endif
+#ifdef UDC_VBUS_EVENT
+ UDC_VBUS_EVENT(Is_otg_vbus_high());
+#endif
+ goto udd_interrupt_end;
+ }
+udd_interrupt_end:
+ dbg_print("\n\r");
+udd_interrupt_sof_end:
+ return;
+}
+
+
+bool udd_include_vbus_monitoring(void)
+{
+ return true;
+}
+
+
+void udd_enable(void)
+{
+ irqflags_t flags;
+
+ flags = cpu_irq_save();
+
+#ifdef UHD_ENABLE
+ // DUAL ROLE INITIALIZATION
+ if (otg_dual_enable()) {
+ // The current mode has been started by otg_dual_enable()
+ cpu_irq_restore(flags);
+ return;
+ }
+#else
+ // SINGLE DEVICE MODE INITIALIZATION
+ pmc_enable_periph_clk(ID_UOTGHS);
+ sysclk_enable_usb();
+
+ // Here, only the device mode is possible, then link UOTGHS interrupt to UDD interrupt
+ NVIC_SetPriority((IRQn_Type) ID_UOTGHS, UDD_USB_INT_LEVEL);
+ NVIC_EnableIRQ((IRQn_Type) ID_UOTGHS);
+
+ // Always authorize asynchrone USB interrupts to exit of sleep mode
+ // For SAM USB wake up device except BACKUP mode
+ pmc_set_fast_startup_input(PMC_FSMR_USBAL);
+#endif
+
+#if (defined USB_ID_GPIO) && (defined UHD_ENABLE)
+ // Check that the device mode is selected by ID pin
+ if (!Is_otg_id_device()) {
+ cpu_irq_restore(flags);
+ return; // Device is not the current mode
+ }
+#else
+ // ID pin not used then force device mode
+ otg_disable_id_pin();
+ otg_force_device_mode();
+#endif
+ // Enable USB hardware
+ otg_enable_pad();
+ otg_enable();
+
+ // Set the USB speed requested by configuration file
+#ifdef USB_DEVICE_LOW_SPEED
+ udd_low_speed_enable();
+#else
+ udd_low_speed_disable();
+# ifdef USB_DEVICE_HS_SUPPORT
+ udd_high_speed_enable();
+# else
+ udd_high_speed_disable();
+# endif
+#endif // USB_DEVICE_LOW_SPEED
+
+ // Check USB clock
+ otg_unfreeze_clock();
+ while (!Is_otg_clock_usable());
+
+ // Reset internal variables
+#if (0!=USB_DEVICE_MAX_EP)
+ udd_ep_job_table_reset();
+#endif
+
+ otg_ack_vbus_transition();
+ // Force Vbus interrupt in case of Vbus always with a high level
+ // This is possible with a short timing between a Host mode stop/start.
+ if (Is_otg_vbus_high()) {
+ otg_raise_vbus_transition();
+ }
+ otg_enable_vbus_interrupt();
+ otg_freeze_clock();
+
+#ifndef UDD_NO_SLEEP_MGR
+ if (!udd_b_sleep_initialized) {
+ udd_b_sleep_initialized = true;
+ // Initialize the sleep mode authorized for the USB suspend mode
+ udd_b_idle = false;
+ sleepmgr_lock_mode(UOTGHS_SLEEP_MODE_USB_SUSPEND);
+ } else {
+ udd_sleep_mode(false); // Enter idle mode
+ }
+#endif
+
+ cpu_irq_restore(flags);
+}
+
+
+void udd_disable(void)
+{
+ irqflags_t flags;
+
+#ifdef UHD_ENABLE
+# ifdef USB_ID_GPIO
+ if (Is_otg_id_host()) {
+ // Freeze clock to switch mode
+ otg_freeze_clock();
+ udd_detach();
+ otg_disable();
+ return; // Host mode running, ignore UDD disable
+ }
+# else
+ if (Is_otg_host_mode_forced()) {
+ return; // Host mode running, ignore UDD disable
+ }
+# endif
+#endif
+
+ flags = cpu_irq_save();
+ otg_unfreeze_clock();
+ udd_detach();
+#ifndef UDD_NO_SLEEP_MGR
+ if (udd_b_sleep_initialized) {
+ udd_b_sleep_initialized = false;
+ sleepmgr_unlock_mode(UOTGHS_SLEEP_MODE_USB_SUSPEND);
+ }
+#endif
+
+#ifndef UHD_ENABLE
+ otg_disable();
+ otg_disable_pad();
+ sysclk_disable_usb();
+ pmc_disable_periph_clk(ID_UOTGHS);
+ // Else the USB clock disable is done by UHC which manage USB dual role
+#endif
+ cpu_irq_restore(flags);
+}
+
+
+void udd_attach(void)
+{
+ irqflags_t flags;
+ flags = cpu_irq_save();
+
+ // At startup the USB bus state is unknown,
+ // therefore the state is considered IDLE to not miss any USB event
+ udd_sleep_mode(true);
+ otg_unfreeze_clock();
+
+ // This section of clock check can be improved with a chek of
+ // USB clock source via sysclk()
+ // Check USB clock because the source can be a PLL
+ while (!Is_otg_clock_usable());
+
+ // Authorize attach if Vbus is present
+ udd_attach_device();
+
+ // Enable USB line events
+ udd_enable_reset_interrupt();
+ udd_enable_suspend_interrupt();
+ udd_enable_wake_up_interrupt();
+ udd_enable_sof_interrupt();
+#ifdef USB_DEVICE_HS_SUPPORT
+ udd_enable_msof_interrupt();
+#endif
+ // Reset following interupts flag
+ udd_ack_reset();
+ udd_ack_sof();
+ udd_ack_msof();
+
+ // The first suspend interrupt must be forced
+ // The first suspend interrupt is not detected else raise it
+ udd_raise_suspend();
+
+ udd_ack_wake_up();
+ otg_freeze_clock();
+ cpu_irq_restore(flags);
+}
+
+
+void udd_detach(void)
+{
+ otg_unfreeze_clock();
+
+ // Detach device from the bus
+ udd_detach_device();
+ otg_freeze_clock();
+ udd_sleep_mode(false);
+}
+
+
+bool udd_is_high_speed(void)
+{
+#ifdef USB_DEVICE_HS_SUPPORT
+ return !Is_udd_full_speed_mode();
+#else
+ return false;
+#endif
+}
+
+
+void udd_set_address(uint8_t address)
+{
+ udd_disable_address();
+ udd_configure_address(address);
+ udd_enable_address();
+}
+
+
+uint8_t udd_getaddress(void)
+{
+ return udd_get_configured_address();
+}
+
+
+uint16_t udd_get_frame_number(void)
+{
+ return udd_frame_number();
+}
+
+uint16_t udd_get_micro_frame_number(void)
+{
+ return udd_micro_frame_number();
+}
+
+void udd_send_remotewakeup(void)
+{
+#ifndef UDD_NO_SLEEP_MGR
+ if (!udd_b_idle)
+#endif
+ {
+ udd_sleep_mode(true); // Enter in IDLE mode
+ otg_unfreeze_clock();
+ udd_initiate_remote_wake_up();
+ }
+}
+
+
+void udd_set_setup_payload(uint8_t *payload, uint16_t payload_size)
+{
+ udd_g_ctrlreq.payload = payload;
+ udd_g_ctrlreq.payload_size = payload_size;
+}
+
+
+#if (0 != USB_DEVICE_MAX_EP)
+bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
+ uint16_t MaxEndpointSize)
+{
+ bool b_dir_in;
+ uint16_t ep_allocated;
+ uint8_t nb_bank, bank, i;
+
+ b_dir_in = ep & USB_EP_DIR_IN;
+ ep = ep & USB_EP_ADDR_MASK;
+
+ if (ep > USB_DEVICE_MAX_EP) {
+ return false;
+ }
+ if (Is_udd_endpoint_enabled(ep)) {
+ return false;
+ }
+ dbg_print("alloc(%x, %d) ", ep, MaxEndpointSize);
+
+ // Bank choise
+ switch (bmAttributes & USB_EP_TYPE_MASK) {
+ case USB_EP_TYPE_ISOCHRONOUS:
+ nb_bank = UDD_ISOCHRONOUS_NB_BANK(ep);
+ break;
+ case USB_EP_TYPE_INTERRUPT:
+ nb_bank = UDD_INTERRUPT_NB_BANK(ep);
+ break;
+ case USB_EP_TYPE_BULK:
+ nb_bank = UDD_BULK_NB_BANK(ep);
+ break;
+ default:
+ Assert(false);
+ return false;
+ }
+ switch (nb_bank) {
+ case 1:
+ bank = UOTGHS_DEVEPTCFG_EPBK_1_BANK >>
+ UOTGHS_DEVEPTCFG_EPBK_Pos;
+ break;
+ case 2:
+ bank = UOTGHS_DEVEPTCFG_EPBK_2_BANK >>
+ UOTGHS_DEVEPTCFG_EPBK_Pos;
+ break;
+ case 3:
+ bank = UOTGHS_DEVEPTCFG_EPBK_3_BANK >>
+ UOTGHS_DEVEPTCFG_EPBK_Pos;
+ break;
+ default:
+ Assert(false);
+ return false;
+ }
+
+ // Check if endpoint size is 8,16,32,64,128,256,512 or 1023
+ Assert(MaxEndpointSize < 1024);
+ Assert((MaxEndpointSize == 1023)
+ || !(MaxEndpointSize & (MaxEndpointSize - 1)));
+ Assert(MaxEndpointSize >= 8);
+
+ // Set configuration of new endpoint
+ udd_configure_endpoint(ep, bmAttributes, (b_dir_in ? 1 : 0),
+ MaxEndpointSize, bank);
+ ep_allocated = 1 << ep;
+
+ // Unalloc endpoints superior
+ for (i = USB_DEVICE_MAX_EP; i > ep; i--) {
+ if (Is_udd_endpoint_enabled(i)) {
+ ep_allocated |= 1 << i;
+ udd_disable_endpoint(i);
+ udd_unallocate_memory(i);
+ }
+ }
+
+ // Realloc/Enable endpoints
+ for (i = ep; i <= USB_DEVICE_MAX_EP; i++) {
+ if (ep_allocated & (1 << i)) {
+ udd_ep_job_t *ptr_job = &udd_ep_job[i - 1];
+ bool b_restart = ptr_job->busy;
+ // Restart running job because
+ // memory window slides up and its data is lost
+ ptr_job->busy = false;
+ // Re-allocate memory
+ udd_allocate_memory(i);
+ udd_enable_endpoint(i);
+ if (!Is_udd_endpoint_configured(i)) {
+ dbg_print("ErrRealloc%d ", i);
+ if (NULL == ptr_job->call_trans) {
+ return false;
+ }
+ if (Is_udd_endpoint_in(i)) {
+ i |= USB_EP_DIR_IN;
+ }
+ ptr_job->call_trans(UDD_EP_TRANSFER_ABORT,
+ ptr_job->buf_cnt, i);
+ return false;
+ }
+ udd_enable_endpoint_bank_autoswitch(i);
+ if (b_restart) {
+ // Re-run the job remaining part
+# ifdef UDD_EP_FIFO_SUPPORTED
+ if (!Is_udd_endpoint_dma_supported(i)
+ && !Is_udd_endpoint_in(i)) {
+ ptr_job->buf_cnt -= ptr_job->buf_load;
+ }
+# else
+ ptr_job->buf_cnt -= ptr_job->buf_load;
+# endif
+ b_restart = udd_ep_run(Is_udd_endpoint_in(i) ?
+ (i | USB_EP_DIR_IN) : i,
+ ptr_job->b_shortpacket,
+ &ptr_job->buf[ptr_job->buf_cnt],
+ ptr_job->buf_size
+ - ptr_job->buf_cnt,
+ ptr_job->call_trans);
+ if (!b_restart) {
+ dbg_print("ErrReRun%d ", i);
+ return false;
+ }
+ }
+ }
+ }
+ return true;
+}
+
+
+void udd_ep_free(udd_ep_id_t ep)
+{
+ uint8_t ep_index = ep & USB_EP_ADDR_MASK;
+ if (USB_DEVICE_MAX_EP < ep_index) {
+ return;
+ }
+ udd_disable_endpoint(ep_index);
+ udd_unallocate_memory(ep_index);
+ udd_ep_abort_job(ep);
+ udd_ep_job[ep_index - 1].stall_requested = false;
+}
+
+
+bool udd_ep_is_halted(udd_ep_id_t ep)
+{
+ uint8_t ep_index = ep & USB_EP_ADDR_MASK;
+ return Is_udd_endpoint_stall_requested(ep_index);
+}
+
+
+bool udd_ep_set_halt(udd_ep_id_t ep)
+{
+ uint8_t ep_index = ep & USB_EP_ADDR_MASK;
+ udd_ep_job_t *ptr_job = &udd_ep_job[ep_index - 1];
+ irqflags_t flags;
+
+ if (USB_DEVICE_MAX_EP < ep_index) {
+ return false;
+ }
+
+ if (Is_udd_endpoint_stall_requested(ep_index) // Endpoint stalled
+ || ptr_job->stall_requested) { // Endpoint stall is requested
+ return true; // Already STALL
+ }
+
+ if (ptr_job->busy == true) {
+ return false; // Job on going, stall impossible
+ }
+
+ flags = cpu_irq_save();
+ if ((ep & USB_EP_DIR_IN) && (0 != udd_nb_busy_bank(ep_index))) {
+ // Delay the stall after the end of IN transfer on USB line
+ ptr_job->stall_requested = true;
+#ifdef UDD_EP_FIFO_SUPPORTED
+ udd_disable_in_send_interrupt(ep_index);
+ udd_enable_endpoint_bank_autoswitch(ep_index);
+#endif
+ udd_enable_bank_interrupt(ep_index);
+ udd_enable_endpoint_interrupt(ep_index);
+ cpu_irq_restore(flags);
+ return true;
+ }
+ // Stall endpoint immediately
+ udd_disable_endpoint_bank_autoswitch(ep_index);
+ udd_ack_stall(ep_index);
+ udd_enable_stall_handshake(ep_index);
+ cpu_irq_restore(flags);
+ return true;
+}
+
+
+bool udd_ep_clear_halt(udd_ep_id_t ep)
+{
+ uint8_t ep_index = ep & USB_EP_ADDR_MASK;
+ udd_ep_job_t *ptr_job = &udd_ep_job[ep_index - 1];
+ bool b_stall_cleared = false;
+
+ if (USB_DEVICE_MAX_EP < ep_index)
+ return false;
+
+ if (ptr_job->stall_requested) {
+ // Endpoint stall has been requested but not done
+ // Remove stall request
+ ptr_job->stall_requested = false;
+ udd_disable_bank_interrupt(ep_index);
+ udd_disable_endpoint_interrupt(ep_index);
+ b_stall_cleared = true;
+ }
+ if (Is_udd_endpoint_stall_requested(ep_index)) {
+ if (Is_udd_stall(ep_index)) {
+ udd_ack_stall(ep_index);
+ // A packet has been stalled
+ // then reset datatoggle
+ udd_reset_data_toggle(ep_index);
+ }
+ // Disable stall
+ udd_disable_stall_handshake(ep_index);
+ udd_enable_endpoint_bank_autoswitch(ep_index);
+ b_stall_cleared = true;
+ }
+ if (b_stall_cleared) {
+ // If a job is register on clear halt action
+ // then execute callback
+ if (ptr_job->busy == true) {
+ ptr_job->busy = false;
+ ptr_job->call_nohalt();
+ }
+ }
+ return true;
+}
+
+
+bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
+ uint8_t * buf, iram_size_t buf_size,
+ udd_callback_trans_t callback)
+{
+#ifdef UDD_EP_FIFO_SUPPORTED
+ bool b_dir_in = Is_udd_endpoint_in(ep & USB_EP_ADDR_MASK);
+#endif
+ udd_ep_job_t *ptr_job;
+ irqflags_t flags;
+
+ ep &= USB_EP_ADDR_MASK;
+ if (USB_DEVICE_MAX_EP < ep) {
+ return false;
+ }
+
+ // Get job about endpoint
+ ptr_job = &udd_ep_job[ep - 1];
+
+ if ((!Is_udd_endpoint_enabled(ep))
+ || Is_udd_endpoint_stall_requested(ep)
+ || ptr_job->stall_requested) {
+ return false; // Endpoint is halted
+ }
+
+ flags = cpu_irq_save();
+ if (ptr_job->busy == true) {
+ cpu_irq_restore(flags);
+ return false; // Job already on going
+ }
+ ptr_job->busy = true;
+ cpu_irq_restore(flags);
+
+ // No job running. Let's setup a new one.
+ ptr_job->buf = buf;
+ ptr_job->buf_size = buf_size;
+ ptr_job->buf_cnt = 0;
+ ptr_job->buf_load = 0;
+ ptr_job->call_trans = callback;
+ ptr_job->b_shortpacket = b_shortpacket || (buf_size == 0);
+
+#ifdef UDD_EP_FIFO_SUPPORTED
+ // No DMA support
+ if (!Is_udd_endpoint_dma_supported(ep)) {
+ dbg_print("ex%x.%c%d\n\r", ep, b_dir_in ? 'i':'o', buf_size);
+ flags = cpu_irq_save();
+ udd_enable_endpoint_interrupt(ep);
+ if (b_dir_in) {
+ udd_disable_endpoint_bank_autoswitch(ep);
+ udd_enable_in_send_interrupt(ep);
+ } else {
+ udd_disable_endpoint_bank_autoswitch(ep);
+ udd_enable_out_received_interrupt(ep);
+ }
+ cpu_irq_restore(flags);
+ return true;
+ }
+#endif // UDD_EP_FIFO_SUPPORTED
+
+#ifdef UDD_EP_DMA_SUPPORTED
+ // Request first DMA transfer
+ dbg_print("(exDMA%x) ", ep);
+ udd_ep_trans_done(ep);
+ return true;
+#endif
+}
+
+
+void udd_ep_abort(udd_ep_id_t ep)
+{
+ uint8_t ep_index = ep & USB_EP_ADDR_MASK;
+
+#ifdef UDD_EP_FIFO_SUPPORTED
+ if (!Is_udd_endpoint_dma_supported(ep_index)) {
+ // Disable interrupts
+ udd_disable_endpoint_interrupt(ep_index);
+ udd_disable_out_received_interrupt(ep_index);
+ udd_disable_in_send_interrupt(ep_index);
+ } else
+#endif
+ {
+ // Stop DMA transfer
+ udd_disable_endpoint_dma_interrupt(ep_index);
+ udd_endpoint_dma_set_control(ep_index, 0);
+ }
+ udd_disable_endpoint_interrupt(ep_index);
+ // Kill IN banks
+ if (ep & USB_EP_DIR_IN) {
+ while(udd_nb_busy_bank(ep_index)) {
+ udd_kill_last_in_bank(ep_index);
+ while(Is_udd_kill_last(ep_index));
+ }
+ }
+ udd_ep_abort_job(ep);
+}
+
+
+bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
+ udd_callback_halt_cleared_t callback)
+{
+ udd_ep_job_t *ptr_job;
+
+ ep &= USB_EP_ADDR_MASK;
+ if (USB_DEVICE_MAX_EP < ep) {
+ return false;
+ }
+
+ ptr_job = &udd_ep_job[ep - 1];
+
+ if (!Is_udd_endpoint_enabled(ep)) {
+ return false; // Endpoint not enabled
+ }
+
+ // Wait clear halt endpoint
+ if (ptr_job->busy == true) {
+ return false; // Job already on going
+ }
+
+ if (Is_udd_endpoint_stall_requested(ep)
+ || ptr_job->stall_requested) {
+ // Endpoint halted then registes the callback
+ ptr_job->busy = true;
+ ptr_job->call_nohalt = callback;
+ } else {
+ // endpoint not halted then call directly callback
+ callback();
+ }
+ return true;
+}
+#endif // (0 != USB_DEVICE_MAX_EP)
+
+
+#ifdef USB_DEVICE_HS_SUPPORT
+
+void udd_test_mode_j(void)
+{
+ udd_enable_hs_test_mode();
+ udd_enable_hs_test_mode_j();
+}
+
+
+void udd_test_mode_k(void)
+{
+ udd_enable_hs_test_mode();
+ udd_enable_hs_test_mode_k();
+}
+
+
+void udd_test_mode_se0_nak(void)
+{
+ udd_enable_hs_test_mode();
+}
+
+
+void udd_test_mode_packet(void)
+{
+ uint8_t i;
+ uint8_t *ptr_dest;
+ const uint8_t *ptr_src;
+
+ const uint8_t test_packet[] = {
+ // 00000000 * 9
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ // 01010101 * 8
+ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
+ // 01110111 * 8
+ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
+ // 0, {111111S * 15}, 111111
+ 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF,
+ // S, 111111S, {0111111S * 7}
+ 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
+ // 00111111, {S0111111 * 9}, S0
+ 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
+ };
+
+ // Reconfigure control endpoint to bulk IN endpoint
+ udd_disable_endpoint(0);
+ udd_configure_endpoint(0, USB_EP_TYPE_BULK, 1,
+ 64, UOTGHS_DEVEPTCFG_EPBK_1_BANK);
+ udd_allocate_memory(0);
+ udd_enable_endpoint(0);
+
+ udd_enable_hs_test_mode();
+ udd_enable_hs_test_mode_packet();
+
+ // Send packet on endpoint 0
+ ptr_dest = (uint8_t *) & udd_get_endpoint_fifo_access(0, 8);
+ ptr_src = test_packet;
+
+ for (i = 0; i < sizeof(test_packet); i++) {
+ *ptr_dest++ = *ptr_src++;
+ }
+ udd_ack_fifocon(0);
+}
+#endif // USB_DEVICE_HS_SUPPORT
+
+
+
+//--------------------------------------------------------
+//--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT
+
+static void udd_reset_ep_ctrl(void)
+{
+ irqflags_t flags;
+
+ // Reset USB address to 0
+ udd_configure_address(0);
+ udd_enable_address();
+
+ // Alloc and configure control endpoint
+ udd_configure_endpoint(0,
+ USB_EP_TYPE_CONTROL,
+ 0,
+ USB_DEVICE_EP_CTRL_SIZE,
+ UOTGHS_DEVEPTCFG_EPBK_1_BANK);
+
+ udd_allocate_memory(0);
+ udd_enable_endpoint(0);
+ flags = cpu_irq_save();
+ udd_enable_setup_received_interrupt(0);
+ udd_enable_out_received_interrupt(0);
+ udd_enable_endpoint_interrupt(0);
+ cpu_irq_restore(flags);
+}
+
+static void udd_ctrl_init(void)
+{
+ irqflags_t flags;
+ flags = cpu_irq_save();
+
+ // In case of abort of IN Data Phase:
+ // No need to abort IN transfer (rise TXINI),
+ // because it is automatically done by hardware when a Setup packet is received.
+ // But the interrupt must be disabled to don't generate interrupt TXINI
+ // after SETUP reception.
+ udd_disable_in_send_interrupt(0);
+ cpu_irq_restore(flags);
+
+ // In case of OUT ZLP event is no processed before Setup event occurs
+ udd_ack_out_received(0);
+
+ udd_g_ctrlreq.callback = NULL;
+ udd_g_ctrlreq.over_under_run = NULL;
+ udd_g_ctrlreq.payload_size = 0;
+ udd_ep_control_state = UDD_EPCTRL_SETUP;
+}
+
+
+static void udd_ctrl_setup_received(void)
+{
+ irqflags_t flags;
+ uint8_t i;
+
+ if (UDD_EPCTRL_SETUP != udd_ep_control_state) {
+ // May be a hidden DATA or ZLP phase or protocol abort
+ udd_ctrl_endofrequest();
+
+ // Reinitializes control endpoint management
+ udd_ctrl_init();
+ }
+ // Fill setup request structure
+ if (8 != udd_byte_count(0)) {
+ udd_ctrl_stall_data();
+ udd_ack_setup_received(0);
+ return; // Error data number doesn't correspond to SETUP packet
+ }
+ uint8_t *ptr = (uint8_t *) & udd_get_endpoint_fifo_access(0,8);
+ for (i = 0; i < 8; i++) {
+ ((uint8_t*) &udd_g_ctrlreq.req)[i] = *ptr++;
+ }
+ // Manage LSB/MSB to fit with CPU usage
+ udd_g_ctrlreq.req.wValue = le16_to_cpu(udd_g_ctrlreq.req.wValue);
+ udd_g_ctrlreq.req.wIndex = le16_to_cpu(udd_g_ctrlreq.req.wIndex);
+ udd_g_ctrlreq.req.wLength = le16_to_cpu(udd_g_ctrlreq.req.wLength);
+
+ // Decode setup request
+ if (udc_process_setup() == false) {
+ // Setup request unknow then stall it
+ udd_ctrl_stall_data();
+ udd_ack_setup_received(0);
+ return;
+ }
+ udd_ack_setup_received(0);
+
+ if (Udd_setup_is_in()) {
+ // IN data phase requested
+ udd_ctrl_prev_payload_buf_cnt = 0;
+ udd_ctrl_payload_buf_cnt = 0;
+ udd_ep_control_state = UDD_EPCTRL_DATA_IN;
+ udd_ctrl_in_sent(); // Send first data transfer
+ } else {
+ if (0 == udd_g_ctrlreq.req.wLength) {
+ // No data phase requested
+ // Send IN ZLP to ACK setup request
+ udd_ctrl_send_zlp_in();
+ return;
+ }
+ // OUT data phase requested
+ udd_ctrl_prev_payload_buf_cnt = 0;
+ udd_ctrl_payload_buf_cnt = 0;
+ udd_ep_control_state = UDD_EPCTRL_DATA_OUT;
+ // To detect a protocol error, enable nak interrupt on data IN phase
+ udd_ack_nak_in(0);
+ flags = cpu_irq_save();
+ udd_enable_nak_in_interrupt(0);
+ cpu_irq_restore(flags);
+ }
+}
+
+
+static void udd_ctrl_in_sent(void)
+{
+ static bool b_shortpacket = false;
+ uint16_t nb_remain;
+ uint8_t i;
+ uint8_t *ptr_dest, *ptr_src;
+ irqflags_t flags;
+
+ flags = cpu_irq_save();
+ udd_disable_in_send_interrupt(0);
+ cpu_irq_restore(flags);
+
+ if (UDD_EPCTRL_HANDSHAKE_WAIT_IN_ZLP == udd_ep_control_state) {
+ // ZLP on IN is sent, then valid end of setup request
+ udd_ctrl_endofrequest();
+ // Reinitializes control endpoint management
+ udd_ctrl_init();
+ return;
+ }
+ Assert(udd_ep_control_state == UDD_EPCTRL_DATA_IN);
+
+ nb_remain = udd_g_ctrlreq.payload_size - udd_ctrl_payload_buf_cnt;
+ if (0 == nb_remain) {
+ // All content of current buffer payload are sent
+ // Update number of total data sending by previous playlaod buffer
+ udd_ctrl_prev_payload_buf_cnt += udd_ctrl_payload_buf_cnt;
+ if ((udd_g_ctrlreq.req.wLength == udd_ctrl_prev_payload_buf_cnt)
+ || b_shortpacket) {
+ // All data requested are transfered or a short packet has been sent
+ // then it is the end of data phase.
+ // Generate an OUT ZLP for handshake phase.
+ udd_ctrl_send_zlp_out();
+ return;
+ }
+ // Need of new buffer because the data phase is not complete
+ if ((!udd_g_ctrlreq.over_under_run)
+ || (!udd_g_ctrlreq.over_under_run())) {
+ // Underrun then send zlp on IN
+ // Here nb_remain=0 and allows to send a IN ZLP
+ } else {
+ // A new payload buffer is given
+ udd_ctrl_payload_buf_cnt = 0;
+ nb_remain = udd_g_ctrlreq.payload_size;
+ }
+ }
+ // Continue transfer and send next data
+ if (nb_remain >= USB_DEVICE_EP_CTRL_SIZE) {
+ nb_remain = USB_DEVICE_EP_CTRL_SIZE;
+ b_shortpacket = false;
+ } else {
+ b_shortpacket = true;
+ }
+ // Fill buffer of endpoint control
+ ptr_dest = (uint8_t *) & udd_get_endpoint_fifo_access(0, 8);
+ ptr_src = udd_g_ctrlreq.payload + udd_ctrl_payload_buf_cnt;
+ // Critical section
+ // Only in case of DATA IN phase abort without USB Reset signal after.
+ // The IN data don't must be written in endpoint 0 DPRAM during
+ // a next setup reception in same endpoint 0 DPRAM.
+ // Thereby, an OUT ZLP reception must check before IN data write
+ // and if no OUT ZLP is recevied the data must be written quickly (800us)
+ // before an eventually ZLP OUT and SETUP reception
+ flags = cpu_irq_save();
+ if (Is_udd_out_received(0)) {
+ // IN DATA phase aborted by OUT ZLP
+ cpu_irq_restore(flags);
+ udd_ep_control_state = UDD_EPCTRL_HANDSHAKE_WAIT_OUT_ZLP;
+ return; // Exit of IN DATA phase
+ }
+ // Write quickly the IN data
+ for (i = 0; i < nb_remain; i++) {
+ *ptr_dest++ = *ptr_src++;
+ }
+ udd_ctrl_payload_buf_cnt += nb_remain;
+
+ // Validate and send the data available in the control endpoint buffer
+ udd_ack_in_send(0);
+ udd_enable_in_send_interrupt(0);
+ // In case of abort of DATA IN phase, no need to enable nak OUT interrupt
+ // because OUT endpoint is already free and ZLP OUT accepted.
+ cpu_irq_restore(flags);
+}
+
+
+static void udd_ctrl_out_received(void)
+{
+ irqflags_t flags;
+ uint8_t i;
+ uint16_t nb_data;
+
+ if (UDD_EPCTRL_DATA_OUT != udd_ep_control_state) {
+ if ((UDD_EPCTRL_DATA_IN == udd_ep_control_state)
+ || (UDD_EPCTRL_HANDSHAKE_WAIT_OUT_ZLP ==
+ udd_ep_control_state)) {
+ // End of SETUP request:
+ // - Data IN Phase aborted,
+ // - or last Data IN Phase hidden by ZLP OUT sending quiclky,
+ // - or ZLP OUT received normaly.
+ udd_ctrl_endofrequest();
+ } else {
+ // Protocol error during SETUP request
+ udd_ctrl_stall_data();
+ }
+ // Reinitializes control endpoint management
+ udd_ctrl_init();
+ return;
+ }
+ // Read data received during OUT phase
+ nb_data = udd_byte_count(0);
+ if (udd_g_ctrlreq.payload_size < (udd_ctrl_payload_buf_cnt + nb_data)) {
+ // Payload buffer too small
+ nb_data = udd_g_ctrlreq.payload_size - udd_ctrl_payload_buf_cnt;
+ }
+ uint8_t *ptr_src = (uint8_t *) & udd_get_endpoint_fifo_access(0, 8);
+ uint8_t *ptr_dest = udd_g_ctrlreq.payload + udd_ctrl_payload_buf_cnt;
+ for (i = 0; i < nb_data; i++) {
+ *ptr_dest++ = *ptr_src++;
+ }
+ udd_ctrl_payload_buf_cnt += nb_data;
+
+ if ((USB_DEVICE_EP_CTRL_SIZE != nb_data)
+ || (udd_g_ctrlreq.req.wLength <=
+ (udd_ctrl_prev_payload_buf_cnt +
+ udd_ctrl_payload_buf_cnt))) {
+ // End of reception because it is a short packet
+ // Before send ZLP, call intermediat calback
+ // in case of data receiv generate a stall
+ udd_g_ctrlreq.payload_size = udd_ctrl_payload_buf_cnt;
+ if (NULL != udd_g_ctrlreq.over_under_run) {
+ if (!udd_g_ctrlreq.over_under_run()) {
+ // Stall ZLP
+ udd_ctrl_stall_data();
+ // Ack reception of OUT to replace NAK by a STALL
+ udd_ack_out_received(0);
+ return;
+ }
+ }
+ // Send IN ZLP to ACK setup request
+ udd_ack_out_received(0);
+ udd_ctrl_send_zlp_in();
+ return;
+ }
+
+ if (udd_g_ctrlreq.payload_size == udd_ctrl_payload_buf_cnt) {
+ // Overrun then request a new payload buffer
+ if (!udd_g_ctrlreq.over_under_run) {
+ // No callback availabled to request a new payload buffer
+ udd_ctrl_stall_data();
+ // Ack reception of OUT to replace NAK by a STALL
+ udd_ack_out_received(0);
+ return;
+ }
+ if (!udd_g_ctrlreq.over_under_run()) {
+ // No new payload buffer delivered
+ udd_ctrl_stall_data();
+ // Ack reception of OUT to replace NAK by a STALL
+ udd_ack_out_received(0);
+ return;
+ }
+ // New payload buffer available
+ // Update number of total data received
+ udd_ctrl_prev_payload_buf_cnt += udd_ctrl_payload_buf_cnt;
+ // Reinit reception on payload buffer
+ udd_ctrl_payload_buf_cnt = 0;
+ }
+ // Free buffer of control endpoint to authorize next reception
+ udd_ack_out_received(0);
+ // To detect a protocol error, enable nak interrupt on data IN phase
+ udd_ack_nak_in(0);
+ flags = cpu_irq_save();
+ udd_enable_nak_in_interrupt(0);
+ cpu_irq_restore(flags);
+}
+
+
+static void udd_ctrl_underflow(void)
+{
+ if (Is_udd_out_received(0))
+ return; // Underflow ignored if OUT data is received
+
+ if (UDD_EPCTRL_DATA_OUT == udd_ep_control_state) {
+ // Host want to stop OUT transaction
+ // then stop to wait OUT data phase and wait IN ZLP handshake
+ udd_ctrl_send_zlp_in();
+ } else if (UDD_EPCTRL_HANDSHAKE_WAIT_OUT_ZLP == udd_ep_control_state) {
+ // A OUT handshake is waiting by device,
+ // but host want extra IN data then stall extra IN data
+ udd_enable_stall_handshake(0);
+ }
+}
+
+
+static void udd_ctrl_overflow(void)
+{
+ if (Is_udd_in_send(0))
+ return; // Overflow ignored if IN data is received
+
+ // The case of UDD_EPCTRL_DATA_IN is not managed
+ // because the OUT endpoint is already free and OUT ZLP accepted
+
+ if (UDD_EPCTRL_HANDSHAKE_WAIT_IN_ZLP == udd_ep_control_state) {
+ // A IN handshake is waiting by device,
+ // but host want extra OUT data then stall extra OUT data
+ udd_enable_stall_handshake(0);
+ }
+}
+
+
+static void udd_ctrl_stall_data(void)
+{
+ // Stall all packets on IN & OUT control endpoint
+ udd_ep_control_state = UDD_EPCTRL_STALL_REQ;
+ udd_enable_stall_handshake(0);
+}
+
+
+static void udd_ctrl_send_zlp_in(void)
+{
+ irqflags_t flags;
+
+ udd_ep_control_state = UDD_EPCTRL_HANDSHAKE_WAIT_IN_ZLP;
+
+ // Validate and send empty IN packet on control endpoint
+ flags = cpu_irq_save();
+ // Send ZLP on IN endpoint
+ udd_ack_in_send(0);
+ udd_enable_in_send_interrupt(0);
+ // To detect a protocol error, enable nak interrupt on data OUT phase
+ udd_ack_nak_out(0);
+ udd_enable_nak_out_interrupt(0);
+ cpu_irq_restore(flags);
+}
+
+
+static void udd_ctrl_send_zlp_out(void)
+{
+ irqflags_t flags;
+
+ udd_ep_control_state = UDD_EPCTRL_HANDSHAKE_WAIT_OUT_ZLP;
+ // No action is necessary to accept OUT ZLP
+ // because the buffer of control endpoint is already free
+
+ // To detect a protocol error, enable nak interrupt on data IN phase
+ flags = cpu_irq_save();
+ udd_ack_nak_in(0);
+ udd_enable_nak_in_interrupt(0);
+ cpu_irq_restore(flags);
+}
+
+
+static void udd_ctrl_endofrequest(void)
+{
+ // If a callback is registered then call it
+ if (udd_g_ctrlreq.callback) {
+ udd_g_ctrlreq.callback();
+ }
+}
+
+
+static bool udd_ctrl_interrupt(void)
+{
+
+ if (!Is_udd_endpoint_interrupt(0)) {
+ return false; // No interrupt events on control endpoint
+ }
+
+ dbg_print("0: ");
+
+ // By default disable overflow and underflow interrupt
+ udd_disable_nak_in_interrupt(0);
+ udd_disable_nak_out_interrupt(0);
+
+ // Search event on control endpoint
+ if (Is_udd_setup_received(0)) {
+ dbg_print("stup ");
+ // SETUP packet received
+ udd_ctrl_setup_received();
+ return true;
+ }
+ if (Is_udd_in_send(0) && Is_udd_in_send_interrupt_enabled(0)) {
+ dbg_print("in ");
+ // IN packet sent
+ udd_ctrl_in_sent();
+ return true;
+ }
+ if (Is_udd_out_received(0)) {
+ dbg_print("out ");
+ // OUT packet received
+ udd_ctrl_out_received();
+ return true;
+ }
+ if (Is_udd_nak_out(0)) {
+ dbg_print("nako ");
+ // Overflow on OUT packet
+ udd_ack_nak_out(0);
+ udd_ctrl_overflow();
+ return true;
+ }
+ if (Is_udd_nak_in(0)) {
+ dbg_print("naki ");
+ // Underflow on IN packet
+ udd_ack_nak_in(0);
+ udd_ctrl_underflow();
+ return true;
+ }
+ dbg_print("n%x ", UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], 0));
+ return false;
+}
+
+
+//--------------------------------------------------------
+//--- INTERNAL ROUTINES TO MANAGED THE BULK/INTERRUPT/ISOCHRONOUS ENDPOINTS
+
+#if (0 != USB_DEVICE_MAX_EP)
+
+static void udd_ep_job_table_reset(void)
+{
+ uint8_t i;
+ for (i = 0; i < USB_DEVICE_MAX_EP; i++) {
+ udd_ep_job[i].busy = false;
+ udd_ep_job[i].stall_requested = false;
+ }
+}
+
+
+static void udd_ep_job_table_kill(void)
+{
+ uint8_t i;
+
+ // For each endpoint, kill job
+ for (i = 0; i < USB_DEVICE_MAX_EP; i++) {
+ udd_ep_finish_job(&udd_ep_job[i], true, i + 1);
+ }
+}
+
+
+static void udd_ep_abort_job(udd_ep_id_t ep)
+{
+ ep &= USB_EP_ADDR_MASK;
+
+ // Abort job on endpoint
+ udd_ep_finish_job(&udd_ep_job[ep - 1], true, ep);
+}
+
+
+static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num)
+{
+ if (ptr_job->busy == false) {
+ return; // No on-going job
+ }
+ dbg_print("(JobE%x:%d) ", (ptr_job-udd_ep_job)+1, b_abort);
+ ptr_job->busy = false;
+ if (NULL == ptr_job->call_trans) {
+ return; // No callback linked to job
+ }
+ if (Is_udd_endpoint_in(ep_num)) {
+ ep_num |= USB_EP_DIR_IN;
+ }
+ ptr_job->call_trans((b_abort) ? UDD_EP_TRANSFER_ABORT :
+ UDD_EP_TRANSFER_OK, ptr_job->buf_size, ep_num);
+}
+
+#ifdef UDD_EP_DMA_SUPPORTED
+static void udd_ep_trans_done(udd_ep_id_t ep)
+{
+ uint32_t udd_dma_ctrl = 0;
+ udd_ep_job_t *ptr_job;
+ iram_size_t next_trans;
+ irqflags_t flags;
+
+ // Get job corresponding at endpoint
+ ptr_job = &udd_ep_job[ep - 1];
+
+ if (!ptr_job->busy) {
+ return; // No job is running, then ignore it (system error)
+ }
+
+ if (ptr_job->buf_cnt != ptr_job->buf_size) {
+ // Need to send or receiv other data
+ next_trans = ptr_job->buf_size - ptr_job->buf_cnt;
+
+ if (UDD_ENDPOINT_MAX_TRANS < next_trans) {
+ // The USB hardware support a maximum
+ // transfer size of UDD_ENDPOINT_MAX_TRANS Bytes
+ next_trans = UDD_ENDPOINT_MAX_TRANS;
+
+ // Set 0 to tranfer the maximum
+ udd_dma_ctrl = UOTGHS_DEVDMACONTROL_BUFF_LENGTH(0);
+ } else {
+ udd_dma_ctrl = UOTGHS_DEVDMACONTROL_BUFF_LENGTH(next_trans);
+ }
+ if (Is_udd_endpoint_in(ep)) {
+ if (0 != (next_trans % udd_get_endpoint_size(ep))) {
+ // Enable short packet option
+ // else the DMA transfer is accepted
+ // and interrupt DMA valid but nothing is sent.
+ udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_B_EN;
+ // No need to request another ZLP
+ ptr_job->b_shortpacket = false;
+ }
+ } else {
+ if ((USB_EP_TYPE_ISOCHRONOUS != udd_get_endpoint_type(ep))
+ || (next_trans <= (iram_size_t) udd_get_endpoint_size(ep))) {
+
+ // Enable short packet reception
+ udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_TR_IT
+ | UOTGHS_DEVDMACONTROL_END_TR_EN;
+ }
+ }
+
+ // Start USB DMA to fill or read fifo of the selected endpoint
+ udd_endpoint_dma_set_addr(ep, (uint32_t) & ptr_job->buf[ptr_job->buf_cnt]);
+ udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_BUFFIT |
+ UOTGHS_DEVDMACONTROL_CHANN_ENB;
+
+
+ // Disable IRQs to have a short sequence
+ // between read of EOT_STA and DMA enable
+ flags = cpu_irq_save();
+ if (!(udd_endpoint_dma_get_status(ep)
+ & UOTGHS_DEVDMASTATUS_END_TR_ST)) {
+ dbg_print("dmaS%x ", ep);
+ udd_endpoint_dma_set_control(ep, udd_dma_ctrl);
+ ptr_job->buf_cnt += next_trans;
+ ptr_job->buf_load = next_trans;
+ udd_enable_endpoint_dma_interrupt(ep);
+ cpu_irq_restore(flags);
+ return;
+ }
+ cpu_irq_restore(flags);
+
+ // Here a ZLP has been recieved
+ // and the DMA transfer must be not started.
+ // It is the end of transfer
+ ptr_job->buf_size = ptr_job->buf_cnt;
+ }
+ if (Is_udd_endpoint_in(ep)) {
+ if (ptr_job->b_shortpacket) {
+ dbg_print("zlpS%x ", ep);
+ // Need to send a ZLP (No possible with USB DMA)
+ // enable interrupt to wait a free bank to sent ZLP
+ udd_ack_in_send(ep);
+ if (Is_udd_write_enabled(ep)) {
+ // Force interrupt in case of ep already free
+ udd_raise_in_send(ep);
+ }
+ udd_enable_in_send_interrupt(ep);
+ udd_enable_endpoint_interrupt(ep);
+ return;
+ }
+ }
+ dbg_print("dmaE ");
+ // Call callback to signal end of transfer
+ udd_ep_finish_job(ptr_job, false, ep);
+}
+#endif
+
+#ifdef UDD_EP_FIFO_SUPPORTED
+static void udd_ep_in_sent(udd_ep_id_t ep)
+{
+ udd_ep_job_t *ptr_job = &udd_ep_job[ep - 1];
+ uint8_t *ptr_src = &ptr_job->buf[ptr_job->buf_cnt];
+ uint8_t *ptr_dst = (uint8_t *) & udd_get_endpoint_fifo_access(ep, 8);
+ uint32_t pkt_size = udd_get_endpoint_size(ep);
+ uint32_t nb_data = 0, i;
+ uint32_t nb_remain;
+ irqflags_t flags;
+
+ // All transfer done, including ZLP, Finish Job
+ if (ptr_job->buf_cnt >= ptr_job->buf_size && !ptr_job->b_shortpacket) {
+ flags = cpu_irq_save();
+ udd_disable_in_send_interrupt(ep);
+ udd_disable_endpoint_interrupt(ep);
+ cpu_irq_restore(flags);
+
+ ptr_job->buf_size = ptr_job->buf_cnt; // buf_size is passed to callback as XFR count
+ udd_ep_finish_job(ptr_job, false, ep);
+ return;
+ } else {
+ // ACK TXINI
+ udd_ack_in_send(ep);
+ // Fill FIFO
+ ptr_dst = (uint8_t *) & udd_get_endpoint_fifo_access(ep, 8);
+ ptr_src = &ptr_job->buf[ptr_job->buf_cnt];
+ nb_remain = ptr_job->buf_size - ptr_job->buf_cnt;
+ // Fill a bank even if no data (ZLP)
+ nb_data = min(nb_remain, pkt_size);
+ // Modify job information
+ ptr_job->buf_cnt += nb_data;
+ ptr_job->buf_load = nb_data;
+
+ // Copy buffer to FIFO
+ for (i = 0; i < nb_data; i++) {
+ *ptr_dst++ = *ptr_src++;
+ }
+ // Switch to next bank
+ udd_ack_fifocon(ep);
+ // ZLP?
+ if (nb_data < pkt_size) {
+ ptr_job->b_shortpacket = false;
+ }
+ }
+}
+
+static void udd_ep_out_received(udd_ep_id_t ep)
+{
+ udd_ep_job_t *ptr_job = &udd_ep_job[ep - 1];
+ uint32_t nb_data = 0, i;
+ uint32_t nb_remain = ptr_job->buf_size - ptr_job->buf_cnt;
+ uint32_t pkt_size = udd_get_endpoint_size(ep);
+ uint8_t *ptr_src = (uint8_t *) & udd_get_endpoint_fifo_access(ep, 8);
+ uint8_t *ptr_dst = &ptr_job->buf[ptr_job->buf_cnt];
+ bool b_full = false, b_short = false;
+
+ // Clear RX OUT
+ udd_ack_out_received(ep);
+
+ // Read byte count
+ nb_data = udd_byte_count(ep);
+ if (nb_data < pkt_size) {
+ b_short = true;
+ }
+ //dbg_print("o%d ", ep);
+ //dbg_print("%d ", nb_data);
+ // Copy data if there is
+ if (nb_data > 0) {
+ if (nb_data >= nb_remain) {
+ nb_data = nb_remain;
+ b_full = true;
+ }
+ // Modify job information
+ ptr_job->buf_cnt += nb_data;
+ ptr_job->buf_load = nb_data;
+ // Copy FIFO to buffer
+ for (i = 0; i < nb_data; i++) {
+ *ptr_dst++ = *ptr_src++;
+ }
+ }
+ // Clear FIFO Status
+ udd_ack_fifocon(ep);
+ // Finish job on error or short packet
+ if (b_full || b_short) {
+ //dbg_print("EoO%d\n\r", ep);
+ udd_disable_out_received_interrupt(ep);
+ udd_disable_endpoint_interrupt(ep);
+ ptr_job->buf_size = ptr_job->buf_cnt; // buf_size is passed to callback as XFR count
+ udd_ep_finish_job(ptr_job, false, ep);
+ }
+}
+#endif // #ifdef UDD_EP_FIFO_SUPPORTED
+
+static bool udd_ep_interrupt(void)
+{
+ udd_ep_id_t ep;
+ udd_ep_job_t *ptr_job;
+
+ // For each endpoint different of control endpoint (0)
+ for (ep = 1; ep <= USB_DEVICE_MAX_EP; ep++) {
+ // Get job corresponding at endpoint
+ ptr_job = &udd_ep_job[ep - 1];
+
+#ifdef UDD_EP_DMA_SUPPORTED
+ // Check DMA event
+ if (Is_udd_endpoint_dma_interrupt_enabled(ep)
+ && Is_udd_endpoint_dma_interrupt(ep)) {
+ uint32_t nb_remaining;
+ if (udd_endpoint_dma_get_status(ep)
+ & UOTGHS_DEVDMASTATUS_CHANN_ENB) {
+ return true; // Ignore EOT_STA interrupt
+ }
+ dbg_print("dma%x: ", ep);
+ udd_disable_endpoint_dma_interrupt(ep);
+ // Save number of data no transfered
+ nb_remaining = (udd_endpoint_dma_get_status(ep) &
+ UOTGHS_DEVDMASTATUS_BUFF_COUNT_Msk)
+ >> UOTGHS_DEVDMASTATUS_BUFF_COUNT_Pos;
+ if (nb_remaining) {
+ // Transfer no complete (short packet or ZLP) then:
+ // Update number of data transfered
+ ptr_job->buf_cnt -= nb_remaining;
+ // Set transfer complete to stop the transfer
+ ptr_job->buf_size = ptr_job->buf_cnt;
+ }
+ udd_ep_trans_done(ep);
+ return true;
+ }
+#endif
+#ifdef UDD_EP_FIFO_SUPPORTED
+ // Check RXRDY and TXEMPTY event for none DMA endpoints
+ if (!Is_udd_endpoint_dma_supported(ep)
+ && Is_udd_endpoint_interrupt_enabled(ep)) {
+ dbg_print("ep%x: ", ep);
+ // RXOUT: Full packet received
+ if (Is_udd_out_received(ep)
+ && Is_udd_out_received_interrupt_enabled(ep)) {
+ dbg_print("Out ");
+ udd_ep_out_received(ep);
+ return true;
+ }
+ // TXIN: packet sent
+ if (Is_udd_in_send(ep)
+ && Is_udd_in_send_interrupt_enabled(ep)) {
+ dbg_print("In ");
+ udd_ep_in_sent(ep);
+ return true;
+ }
+ // Errors: Abort?
+ if (Is_udd_overflow(ep)
+ || Is_udd_underflow(ep)
+ || Is_udd_crc_error(ep)) {
+ dbg_print("Err ");
+ udd_ep_abort(ep);
+ return true;
+ }
+ }
+#endif // UDD_EP_FIFO_SUPPORTED
+ // Check empty bank interrupt event
+ if (Is_udd_endpoint_interrupt_enabled(ep)) {
+ dbg_print("bg%x: ", ep);
+ if (Is_udd_in_send_interrupt_enabled(ep)
+ && Is_udd_in_send(ep)) {
+ dbg_print("I ");
+ udd_disable_in_send_interrupt(ep);
+ // One bank is free then send a ZLP
+ udd_ack_in_send(ep);
+ udd_ack_fifocon(ep);
+ udd_ep_finish_job(ptr_job, false, ep);
+ return true;
+ }
+ if (Is_udd_bank_interrupt_enabled(ep)
+ && (0 == udd_nb_busy_bank(ep))) {
+ dbg_print("EoT ");
+ // End of background transfer on IN endpoint
+ udd_disable_bank_interrupt(ep);
+ udd_disable_endpoint_interrupt(ep);
+
+ Assert(ptr_job->stall_requested);
+ // A stall has been requested during backgound transfer
+ ptr_job->stall_requested = false;
+ udd_disable_endpoint_bank_autoswitch(ep);
+ udd_enable_stall_handshake(ep);
+ udd_reset_data_toggle(ep);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+#endif // (0 != USB_DEVICE_MAX_EP)
+
+//@}
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.h b/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.h
new file mode 100644
index 0000000000..88e015ca37
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/uotghs_device_due.h
@@ -0,0 +1,663 @@
+/**
+ * \file
+ *
+ * \brief USB Device Driver for UOTGHS. Compliant with common UDD driver.
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef UOTGHS_DEVICE_DUE_H_INCLUDED
+#define UOTGHS_DEVICE_DUE_H_INCLUDED
+
+//#include "compiler.h"
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+extern "C" {
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+//! \ingroup udd_group
+//! \defgroup udd_udphs_group USB On-The-Go High-Speed Port for device mode (UOTGHS)
+//! UOTGHS low-level driver for USB device mode
+//!
+//! @{
+
+#ifndef UOTGHS_DEVEPTCFG_EPDIR_Pos
+// Bit pos is not defined in SAM header file but we need it.
+# define UOTGHS_DEVEPTCFG_EPDIR_Pos 8
+#endif
+
+//! @name UOTGHS Device IP properties
+//! These macros give access to IP properties
+//! @{
+ //! Get maximal number of endpoints
+#define udd_get_endpoint_max_nbr() (9)
+#define UDD_MAX_PEP_NB (udd_get_endpoint_max_nbr() + 1)
+ //! Get maximal number of banks of endpoints
+#define udd_get_endpoint_bank_max_nbr(ep) ((ep == 0) ? 1 : (( ep <= 2) ? 3 : 2))
+ //! Get maximal size of endpoint (3X, 1024/64)
+#define udd_get_endpoint_size_max(ep) (((ep) == 0) ? 64 : 1024)
+ //! Get DMA support of endpoints
+#define Is_udd_endpoint_dma_supported(ep) ((((ep) >= 1) && ((ep) <= 6)) ? true : false)
+ //! Get High Band Width support of endpoints
+#define Is_udd_endpoint_high_bw_supported(ep) (((ep) >= 2) ? true : false)
+//! @}
+
+//! @name UOTGHS Device speeds management
+//! @{
+ //! Enable/disable device low-speed mode
+#define udd_low_speed_enable() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_LS))
+#define udd_low_speed_disable() (Clr_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_LS))
+ //! Test if device low-speed mode is forced
+#define Is_udd_low_speed_enable() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_LS))
+
+#ifdef UOTGHS_DEVCTRL_SPDCONF_HIGH_SPEED
+ //! Enable high speed mode
+# define udd_high_speed_enable() (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_SPDCONF_Msk, 0))
+ //! Disable high speed mode
+# define udd_high_speed_disable() (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_SPDCONF_Msk, 3))
+ //! Test if controller is in full speed mode
+# define Is_udd_full_speed_mode() (Rd_bitfield(UOTGHS->UOTGHS_SR, UOTGHS_SR_SPEED_Msk) == UOTGHS_SR_SPEED_FULL_SPEED)
+#else
+# define udd_high_speed_enable() do { } while (0)
+# define udd_high_speed_disable() do { } while (0)
+# define Is_udd_full_speed_mode() true
+#endif
+//! @}
+
+//! @name UOTGHS Device HS test mode management
+//! @{
+#ifdef UOTGHS_DEVCTRL_SPDCONF_HIGH_SPEED
+ //! Enable high speed test mode
+# define udd_enable_hs_test_mode() (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_SPDCONF_Msk, 2))
+# define udd_enable_hs_test_mode_j() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_TSTJ))
+# define udd_enable_hs_test_mode_k() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_TSTK))
+# define udd_enable_hs_test_mode_packet() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_TSTPCKT))
+#endif
+//! @}
+
+//! @name UOTGHS Device vbus management
+//! @{
+#define udd_enable_vbus_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
+#define udd_disable_vbus_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
+#define Is_udd_vbus_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
+#define Is_udd_vbus_high() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUS))
+#define Is_udd_vbus_low() (!Is_udd_vbus_high())
+#define udd_ack_vbus_transition() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_VBUSTIC)
+#define udd_raise_vbus_transition() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_VBUSTIS)
+#define Is_udd_vbus_transition() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
+//! @}
+
+
+//! @name UOTGHS device attach control
+//! These macros manage the UOTGHS Device attach.
+//! @{
+ //! Detaches from USB bus
+#define udd_detach_device() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
+ //! Attaches to USB bus
+#define udd_attach_device() (Clr_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
+ //! Test if the device is detached
+#define Is_udd_detached() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
+//! @}
+
+
+//! @name UOTGHS device bus events control
+//! These macros manage the UOTGHS Device bus events.
+//! @{
+
+//! Initiates a remote wake-up event
+//! @{
+#define udd_initiate_remote_wake_up() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_RMWKUP))
+#define Is_udd_pending_remote_wake_up() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_RMWKUP))
+//! @}
+
+//! Manage upstream resume event (=remote wakeup)
+//! The USB driver sends a resume signal called "Upstream Resume"
+//! @{
+#define udd_enable_remote_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_UPRSMES)
+#define udd_disable_remote_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_UPRSMEC)
+#define Is_udd_remote_wake_up_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_UPRSME))
+#define udd_ack_remote_wake_up_start() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_UPRSMC)
+#define udd_raise_remote_wake_up_start() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_UPRSMS)
+#define Is_udd_remote_wake_up_start() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_UPRSM))
+//! @}
+
+//! Manage downstream resume event (=remote wakeup from host)
+//! The USB controller detects a valid "End of Resume" signal initiated by the host
+//! @{
+#define udd_enable_resume_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_EORSMES)
+#define udd_disable_resume_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_EORSMEC)
+#define Is_udd_resume_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_EORSME))
+#define udd_ack_resume() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_EORSMC)
+#define udd_raise_resume() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_EORSMS)
+#define Is_udd_resume() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_EORSM))
+//! @}
+
+//! Manage wake-up event (=usb line activity)
+//! The USB controller is reactivated by a filtered non-idle signal from the lines
+//! @{
+#define udd_enable_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_WAKEUPES)
+#define udd_disable_wake_up_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_WAKEUPEC)
+#define Is_udd_wake_up_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_WAKEUPE))
+#define udd_ack_wake_up() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_WAKEUPC)
+#define udd_raise_wake_up() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_WAKEUPS)
+#define Is_udd_wake_up() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_WAKEUP))
+//! @}
+
+//! Manage reset event
+//! Set when a USB "End of Reset" has been detected
+//! @{
+#define udd_enable_reset_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_EORSTES)
+#define udd_disable_reset_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_EORSTEC)
+#define Is_udd_reset_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_EORSTE))
+#define udd_ack_reset() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_EORSTC)
+#define udd_raise_reset() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_EORSTS)
+#define Is_udd_reset() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_EORST))
+//! @}
+
+//! Manage start of frame event
+//! @{
+#define udd_enable_sof_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_SOFES)
+#define udd_disable_sof_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_SOFEC)
+#define Is_udd_sof_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_SOFE))
+#define udd_ack_sof() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_SOFC)
+#define udd_raise_sof() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_SOFS)
+#define Is_udd_sof() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_SOF))
+#define udd_frame_number() (Rd_bitfield(UOTGHS->UOTGHS_DEVFNUM, UOTGHS_DEVFNUM_FNUM_Msk))
+#define Is_udd_frame_number_crc_error() (Tst_bits(UOTGHS->UOTGHS_DEVFNUM, UOTGHS_DEVFNUM_FNCERR))
+//! @}
+
+//! Manage Micro start of frame event (High Speed Only)
+//! @{
+#define udd_enable_msof_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_MSOFES)
+#define udd_disable_msof_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_MSOFEC)
+#define Is_udd_msof_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_MSOFE))
+#define udd_ack_msof() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVIMR_MSOFE)
+#define udd_raise_msof() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_MSOFS)
+#define Is_udd_msof() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_MSOF))
+#define udd_micro_frame_number() \
+ (Rd_bitfield(UOTGHS->UOTGHS_DEVFNUM, (UOTGHS_DEVFNUM_FNUM_Msk|UOTGHS_DEVFNUM_MFNUM_Msk)))
+//! @}
+
+//! Manage suspend event
+//! @{
+#define udd_enable_suspend_interrupt() (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_SUSPES)
+#define udd_disable_suspend_interrupt() (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_SUSPEC)
+#define Is_udd_suspend_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_SUSPE))
+#define udd_ack_suspend() (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVICR_SUSPC)
+#define udd_raise_suspend() (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_SUSPS)
+#define Is_udd_suspend() (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_SUSP))
+//! @}
+
+//! @}
+
+//! @name UOTGHS device address control
+//! These macros manage the UOTGHS Device address.
+//! @{
+ //! enables USB device address
+#define udd_enable_address() (Set_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_ADDEN))
+ //! disables USB device address
+#define udd_disable_address() (Clr_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_ADDEN))
+#define Is_udd_address_enabled() (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_ADDEN))
+ //! configures the USB device address
+#define udd_configure_address(addr) (Wr_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk, addr))
+ //! gets the currently configured USB device address
+#define udd_get_configured_address() (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
+//! @}
+
+
+//! @name UOTGHS Device endpoint drivers
+//! These macros manage the common features of the endpoints.
+//! @{
+
+//! Generic macro for UOTGHS registers that can be arrayed
+//! @{
+#define UOTGHS_ARRAY(reg,index) ((&(UOTGHS->reg))[(index)])
+//! @}
+
+//! @name UOTGHS Device endpoint configuration
+//! @{
+ //! enables the selected endpoint
+#define udd_enable_endpoint(ep) (Set_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPEN0 << (ep)))
+ //! disables the selected endpoint
+#define udd_disable_endpoint(ep) (Clr_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPEN0 << (ep)))
+ //! tests if the selected endpoint is enabled
+#define Is_udd_endpoint_enabled(ep) (Tst_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPEN0 << (ep)))
+ //! resets the selected endpoint
+#define udd_reset_endpoint(ep) \
+ do { \
+ Set_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPRST0 << (ep)); \
+ Clr_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPRST0 << (ep)); \
+ } while (0)
+ //! Tests if the selected endpoint is being reset
+#define Is_udd_resetting_endpoint(ep) (Tst_bits(UOTGHS->UOTGHS_DEVEPT, UOTGHS_DEVEPT_EPRST0 << (ep)))
+
+ //! Configures the selected endpoint type
+#define udd_configure_endpoint_type(ep, type) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPTYPE_Msk, type))
+ //! Gets the configured selected endpoint type
+#define udd_get_endpoint_type(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPTYPE_Msk))
+ //! Enables the bank autoswitch for the selected endpoint
+#define udd_enable_endpoint_bank_autoswitch(ep) (Set_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_AUTOSW))
+ //! Disables the bank autoswitch for the selected endpoint
+#define udd_disable_endpoint_bank_autoswitch(ep) (Clr_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_AUTOSW))
+#define Is_udd_endpoint_bank_autoswitch_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_AUTOSW))
+ //! Configures the selected endpoint direction
+#define udd_configure_endpoint_direction(ep, dir) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPDIR, dir))
+ //! Gets the configured selected endpoint direction
+#define udd_get_endpoint_direction(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPDIR))
+#define Is_udd_endpoint_in(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPDIR))
+ //! Bounds given integer size to allowed range and rounds it up to the nearest
+ //! available greater size, then applies register format of UOTGHS controller
+ //! for endpoint size bit-field.
+#define udd_format_endpoint_size(size) (32 - clz(((uint32_t)min(max(size, 8), 1024) << 1) - 1) - 1 - 3)
+ //! Configures the selected endpoint size
+#define udd_configure_endpoint_size(ep, size) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPSIZE_Msk, udd_format_endpoint_size(size)))
+ //! Gets the configured selected endpoint size
+#define udd_get_endpoint_size(ep) (8 << Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPSIZE_Msk))
+ //! Configures the selected endpoint number of banks
+#define udd_configure_endpoint_bank(ep, bank) (Wr_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPBK_Msk, bank))
+ //! Gets the configured selected endpoint number of banks
+#define udd_get_endpoint_bank(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPBK_Msk)+1)
+ //! Allocates the configuration selected endpoint in DPRAM memory
+#define udd_allocate_memory(ep) (Set_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_ALLOC))
+ //! un-allocates the configuration selected endpoint in DPRAM memory
+#define udd_unallocate_memory(ep) (Clr_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_ALLOC))
+#define Is_udd_memory_allocated(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_ALLOC))
+
+ //! Configures selected endpoint in one step
+#define udd_configure_endpoint(ep, type, dir, size, bank) (\
+ Wr_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTCFG[0], ep), UOTGHS_DEVEPTCFG_EPTYPE_Msk |\
+ UOTGHS_DEVEPTCFG_EPDIR |\
+ UOTGHS_DEVEPTCFG_EPSIZE_Msk |\
+ UOTGHS_DEVEPTCFG_EPBK_Msk , \
+ (((uint32_t)(type) << UOTGHS_DEVEPTCFG_EPTYPE_Pos) & UOTGHS_DEVEPTCFG_EPTYPE_Msk) |\
+ (((uint32_t)(dir ) << UOTGHS_DEVEPTCFG_EPDIR_Pos ) & UOTGHS_DEVEPTCFG_EPDIR) |\
+ ( (uint32_t)udd_format_endpoint_size(size) << UOTGHS_DEVEPTCFG_EPSIZE_Pos) |\
+ (((uint32_t)(bank) << UOTGHS_DEVEPTCFG_EPBK_Pos) & UOTGHS_DEVEPTCFG_EPBK_Msk))\
+)
+ //! Tests if current endpoint is configured
+#define Is_udd_endpoint_configured(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_CFGOK))
+ //! Returns the control direction
+#define udd_control_direction() (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], EP_CONTROL), UOTGHS_DEVEPTISR_CTRLDIR))
+
+ //! Resets the data toggle sequence
+#define udd_reset_data_toggle(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_RSTDTS)
+ //! Tests if the data toggle sequence is being reset
+#define Is_udd_data_toggle_reset(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_RSTDT))
+ //! Returns data toggle
+#define udd_data_toggle(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
+//! @}
+
+
+//! @name UOTGHS Device control endpoint
+//! These macros control the endpoints.
+//! @{
+
+//! @name UOTGHS Device control endpoint interrupts
+//! These macros control the endpoints interrupts.
+//! @{
+ //! Enables the selected endpoint interrupt
+#define udd_enable_endpoint_interrupt(ep) (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_PEP_0 << (ep))
+ //! Disables the selected endpoint interrupt
+#define udd_disable_endpoint_interrupt(ep) (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_PEP_0 << (ep))
+ //! Tests if the selected endpoint interrupt is enabled
+#define Is_udd_endpoint_interrupt_enabled(ep) (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_PEP_0 << (ep)))
+ //! Tests if an interrupt is triggered by the selected endpoint
+#define Is_udd_endpoint_interrupt(ep) (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_PEP_0 << (ep)))
+ //! Returns the lowest endpoint number generating an endpoint interrupt or MAX_PEP_NB if none
+#define udd_get_interrupt_endpoint_number() (ctz(((UOTGHS->UOTGHS_DEVISR >> UOTGHS_DEVISR_PEP_Pos) & \
+ (UOTGHS->UOTGHS_DEVIMR >> UOTGHS_DEVIMR_PEP_Pos)) | \
+ (1 << MAX_PEP_NB)))
+#define UOTGHS_DEVISR_PEP_Pos 12
+#define UOTGHS_DEVIMR_PEP_Pos 12
+//! @}
+
+//! @name UOTGHS Device control endpoint errors
+//! These macros control the endpoint errors.
+//! @{
+ //! Enables the STALL handshake
+#define udd_enable_stall_handshake(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_STALLRQS)
+ //! Disables the STALL handshake
+#define udd_disable_stall_handshake(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_STALLRQC)
+ //! Tests if STALL handshake request is running
+#define Is_udd_endpoint_stall_requested(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_STALLRQ))
+ //! Tests if STALL sent
+#define Is_udd_stall(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_STALLEDI))
+ //! ACKs STALL sent
+#define udd_ack_stall(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_STALLEDIC)
+ //! Raises STALL sent
+#define udd_raise_stall(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_STALLEDIS)
+ //! Enables STALL sent interrupt
+#define udd_enable_stall_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_STALLEDES)
+ //! Disables STALL sent interrupt
+#define udd_disable_stall_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_STALLEDEC)
+ //! Tests if STALL sent interrupt is enabled
+#define Is_udd_stall_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_STALLEDE))
+
+ //! Tests if NAK OUT received
+#define Is_udd_nak_out(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_NAKOUTI))
+ //! ACKs NAK OUT received
+#define udd_ack_nak_out(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_NAKOUTIC)
+ //! Raises NAK OUT received
+#define udd_raise_nak_out(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NAKOUTIS)
+ //! Enables NAK OUT interrupt
+#define udd_enable_nak_out_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_NAKOUTES)
+ //! Disables NAK OUT interrupt
+#define udd_disable_nak_out_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_NAKOUTEC)
+ //! Tests if NAK OUT interrupt is enabled
+#define Is_udd_nak_out_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_NAKOUTE))
+
+ //! Tests if NAK IN received
+#define Is_udd_nak_in(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_NAKINI))
+ //! ACKs NAK IN received
+#define udd_ack_nak_in(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_NAKINIC)
+ //! Raises NAK IN received
+#define udd_raise_nak_in(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NAKINIS)
+ //! Enables NAK IN interrupt
+#define udd_enable_nak_in_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_NAKINES)
+ //! Disables NAK IN interrupt
+#define udd_disable_nak_in_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_NAKINEC)
+ //! Tests if NAK IN interrupt is enabled
+#define Is_udd_nak_in_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_NAKINE))
+
+ //! ACKs endpoint isochronous overflow interrupt
+#define udd_ack_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_OVERFIC)
+ //! Raises endpoint isochronous overflow interrupt
+#define udd_raise_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_OVERFIS)
+ //! Tests if an overflow occurs
+#define Is_udd_overflow(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_OVERFI))
+ //! Enables overflow interrupt
+#define udd_enable_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_OVERFES)
+ //! Disables overflow interrupt
+#define udd_disable_overflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_OVERFEC)
+ //! Tests if overflow interrupt is enabled
+#define Is_udd_overflow_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_OVERFE))
+
+ //! ACKs endpoint isochronous underflow interrupt
+#define udd_ack_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_UNDERFIC)
+ //! Raises endpoint isochronous underflow interrupt
+#define udd_raise_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_UNDERFIS)
+ //! Tests if an underflow occurs
+#define Is_udd_underflow(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_UNDERFI))
+ //! Enables underflow interrupt
+#define udd_enable_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_UNDERFES)
+ //! Disables underflow interrupt
+#define udd_disable_underflow_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_UNDERFEC)
+ //! Tests if underflow interrupt is enabled
+#define Is_udd_underflow_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_UNDERFE))
+
+ //! Tests if CRC ERROR ISO OUT detected
+#define Is_udd_crc_error(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_CRCERRI))
+ //! ACKs CRC ERROR ISO OUT detected
+#define udd_ack_crc_error(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_CRCERRIC)
+ //! Raises CRC ERROR ISO OUT detected
+#define udd_raise_crc_error(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_CRCERRIS)
+ //! Enables CRC ERROR ISO OUT detected interrupt
+#define udd_enable_crc_error_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_CRCERRES)
+ //! Disables CRC ERROR ISO OUT detected interrupt
+#define udd_disable_crc_error_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_CRCERREC)
+ //! Tests if CRC ERROR ISO OUT detected interrupt is enabled
+#define Is_udd_crc_error_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_CRCERRE))
+//! @}
+
+//! @name UOTGHS Device control endpoint transfer
+//! These macros control the endpoint transfer.
+//! @{
+
+ //! Tests if endpoint read allowed
+#define Is_udd_read_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RWALL))
+ //! Tests if endpoint write allowed
+#define Is_udd_write_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RWALL))
+
+ //! Returns the byte count
+#define udd_byte_count(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_BYCT_Msk))
+ //! Clears FIFOCON bit
+#define udd_ack_fifocon(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_FIFOCONC)
+ //! Tests if FIFOCON bit set
+#define Is_udd_fifocon(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_FIFOCON))
+
+ //! Returns the number of busy banks
+#define udd_nb_busy_bank(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_NBUSYBK_Msk))
+ //! Returns the number of the current bank
+#define udd_current_bank(ep) (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_CURRBK_Msk))
+ //! Kills last bank
+#define udd_kill_last_in_bank(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_KILLBKS)
+#define Is_udd_kill_last(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_KILLBK))
+ //! Tests if last bank killed
+#define Is_udd_last_in_bank_killed(ep) (!Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_KILLBK))
+ //! Forces all banks full (OUT) or free (IN) interrupt
+#define udd_force_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NBUSYBKS)
+ //! Unforces all banks full (OUT) or free (IN) interrupt
+#define udd_unforce_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_NBUSYBKS)
+ //! Enables all banks full (OUT) or free (IN) interrupt
+#define udd_enable_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_NBUSYBKES)
+ //! Disables all banks full (OUT) or free (IN) interrupt
+#define udd_disable_bank_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_NBUSYBKEC)
+ //! Tests if all banks full (OUT) or free (IN) interrupt enabled
+#define Is_udd_bank_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_NBUSYBKE))
+
+ //! Tests if SHORT PACKET received
+#define Is_udd_short_packet(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_SHORTPACKET))
+ //! ACKs SHORT PACKET received
+#define udd_ack_short_packet(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_SHORTPACKETC)
+ //! Raises SHORT PACKET received
+#define udd_raise_short_packet(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_SHORTPACKETS)
+ //! Enables SHORT PACKET received interrupt
+#define udd_enable_short_packet_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_SHORTPACKETES)
+ //! Disables SHORT PACKET received interrupt
+#define udd_disable_short_packet_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_SHORTPACKETEC)
+ //! Tests if SHORT PACKET received interrupt is enabled
+#define Is_udd_short_packet_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_SHORTPACKETE))
+
+ //! Tests if SETUP received
+#define Is_udd_setup_received(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RXSTPI))
+ //! ACKs SETUP received
+#define udd_ack_setup_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_RXSTPIC)
+ //! Raises SETUP received
+#define udd_raise_setup_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_RXSTPIS)
+ //! Enables SETUP received interrupt
+#define udd_enable_setup_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_RXSTPES)
+ //! Disables SETUP received interrupt
+#define udd_disable_setup_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_RXSTPEC)
+ //! Tests if SETUP received interrupt is enabled
+#define Is_udd_setup_received_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_RXSTPE))
+
+ //! Tests if OUT received
+#define Is_udd_out_received(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_RXOUTI))
+ //! ACKs OUT received
+#define udd_ack_out_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_RXOUTIC)
+ //! Raises OUT received
+#define udd_raise_out_received(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_RXOUTIS)
+ //! Enables OUT received interrupt
+#define udd_enable_out_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_RXOUTES)
+ //! Disables OUT received interrupt
+#define udd_disable_out_received_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_RXOUTEC)
+ //! Tests if OUT received interrupt is enabled
+#define Is_udd_out_received_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_RXOUTE))
+
+ //! Tests if IN sending
+#define Is_udd_in_send(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_TXINI))
+ //! ACKs IN sending
+#define udd_ack_in_send(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTICR[0], ep) = UOTGHS_DEVEPTICR_TXINIC)
+ //! Raises IN sending
+#define udd_raise_in_send(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIFR[0], ep) = UOTGHS_DEVEPTIFR_TXINIS)
+ //! Enables IN sending interrupt
+#define udd_enable_in_send_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0], ep) = UOTGHS_DEVEPTIER_TXINES)
+ //! Disables IN sending interrupt
+#define udd_disable_in_send_interrupt(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0], ep) = UOTGHS_DEVEPTIDR_TXINEC)
+ //! Tests if IN sending interrupt is enabled
+#define Is_udd_in_send_interrupt_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))
+
+
+ //! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
+ //! @param ep Endpoint of which to access FIFO data register
+ //! @param scale Data scale in bits: 64, 32, 16 or 8
+ //! @return Volatile 64-, 32-, 16- or 8-bit data pointer to FIFO data register
+ //! @warning It is up to the user of this macro to make sure that all accesses
+ //! are aligned with their natural boundaries except 64-bit accesses which
+ //! require only 32-bit alignment.
+ //! @warning It is up to the user of this macro to make sure that used HSB
+ //! addresses are identical to the DPRAM internal pointer modulo 32 bits.
+#define udd_get_endpoint_fifo_access(ep, scale) \
+ (((volatile TPASTE2(U, scale) (*)[0x8000 / ((scale) / 8)])UOTGHS_RAM_ADDR)[(ep)])
+
+//! @name UOTGHS endpoint DMA drivers
+//! These macros manage the common features of the endpoint DMA channels.
+//! @{
+
+ //! Maximum transfer size on USB DMA
+#define UDD_ENDPOINT_MAX_TRANS 0x10000
+ //! Enables the disabling of HDMA requests by endpoint interrupts
+#define udd_enable_endpoint_int_dis_hdma_req(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIER[0](ep) = UOTGHS_DEVEPTIER_EPDISHDMAS)
+ //! Disables the disabling of HDMA requests by endpoint interrupts
+#define udd_disable_endpoint_int_dis_hdma_req(ep) (UOTGHS_ARRAY(UOTGHS_DEVEPTIDR[0](ep) = UOTGHS_DEVEPTIDR_EPDISHDMAC)
+ //! Tests if the disabling of HDMA requests by endpoint interrupts is enabled
+#define Is_udd_endpoint_int_dis_hdma_req_enabled(ep) (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0](ep), UOTGHS_DEVEPTIMR_EPDISHDMA))
+
+ //! Raises the selected endpoint DMA channel interrupt
+#define udd_raise_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVIFR = UOTGHS_DEVIFR_DMA_1 << ((ep) - 1))
+ //! Raises the selected endpoint DMA channel interrupt
+#define udd_clear_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVICR = UOTGHS_DEVISR_DMA_1 << ((ep) - 1))
+ //! Tests if an interrupt is triggered by the selected endpoint DMA channel
+#define Is_udd_endpoint_dma_interrupt(ep) (Tst_bits(UOTGHS->UOTGHS_DEVISR, UOTGHS_DEVISR_DMA_1 << ((ep) - 1)))
+ //! Enables the selected endpoint DMA channel interrupt
+#define udd_enable_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVIER = UOTGHS_DEVIER_DMA_1 << ((ep) - 1))
+ //! Disables the selected endpoint DMA channel interrupt
+#define udd_disable_endpoint_dma_interrupt(ep) (UOTGHS->UOTGHS_DEVIDR = UOTGHS_DEVIDR_DMA_1 << ((ep) - 1))
+ //! Tests if the selected endpoint DMA channel interrupt is enabled
+#define Is_udd_endpoint_dma_interrupt_enabled(ep) (Tst_bits(UOTGHS->UOTGHS_DEVIMR, UOTGHS_DEVIMR_DMA_1 << ((ep) - 1)))
+
+ //! Access points to the UOTGHS device DMA memory map with arrayed registers
+ //! @{
+ //! Structure for DMA next descriptor register
+typedef struct {
+ uint32_t *NXT_DSC_ADD;
+} uotghs_dma_nextdesc_t;
+ //! Structure for DMA control register
+typedef struct {
+ uint32_t CHANN_ENB:1,
+ LDNXT_DSC:1,
+ END_TR_EN:1,
+ END_B_EN:1,
+ END_TR_IT:1,
+ END_BUFFIT:1,
+ DESC_LD_IT:1,
+ BUST_LCK:1,
+ reserved:8,
+ BUFF_LENGTH:16;
+} uotghs_dma_control_t;
+ //! Structure for DMA status register
+typedef struct {
+ uint32_t CHANN_ENB:1,
+ CHANN_ACT:1,
+ reserved0:2,
+ END_TR_ST:1,
+ END_BF_ST:1,
+ DESC_LDST:1,
+ reserved1:9,
+ BUFF_COUNT:16;
+} uotghs_dma_status_t;
+ //! Structure for DMA descriptor
+typedef struct {
+ union {
+ uint32_t nextdesc;
+ uotghs_dma_nextdesc_t NEXTDESC;
+ };
+ uint32_t addr;
+ union {
+ uint32_t control;
+ uotghs_dma_control_t CONTROL;
+ };
+ uint32_t reserved;
+} sam_uotghs_dmadesc_t, uotghs_dmadesc_t;
+ //! Structure for DMA registers in a channel
+typedef struct {
+ union {
+ uint32_t nextdesc;
+ uotghs_dma_nextdesc_t NEXTDESC;
+ };
+ uint32_t addr;
+ union {
+ uint32_t control;
+ uotghs_dma_control_t CONTROL;
+ };
+ union {
+ unsigned long status;
+ uotghs_dma_status_t STATUS;
+ };
+} sam_uotghs_dmach_t, uotghs_dmach_t;
+ //! DMA channel control command
+#define UDD_ENDPOINT_DMA_STOP_NOW (0)
+#define UDD_ENDPOINT_DMA_RUN_AND_STOP (UOTGHS_DEVDMACONTROL_CHANN_ENB)
+#define UDD_ENDPOINT_DMA_LOAD_NEXT_DESC (UOTGHS_DEVDMACONTROL_LDNXT_DSC)
+#define UDD_ENDPOINT_DMA_RUN_AND_LINK (UOTGHS_DEVDMACONTROL_CHANN_ENB|UOTGHS_DEVDMACONTROL_LDNXT_DSC)
+ //! Structure for DMA registers
+#define UOTGHS_UDDMA_ARRAY(ep) (((volatile uotghs_dmach_t *)UOTGHS->UOTGHS_DEVDMA)[(ep) - 1])
+
+ //! Set control desc to selected endpoint DMA channel
+#define udd_endpoint_dma_set_control(ep,desc) (UOTGHS_UDDMA_ARRAY(ep).control = desc)
+ //! Get control desc to selected endpoint DMA channel
+#define udd_endpoint_dma_get_control(ep) (UOTGHS_UDDMA_ARRAY(ep).control)
+ //! Set RAM address to selected endpoint DMA channel
+#define udd_endpoint_dma_set_addr(ep,add) (UOTGHS_UDDMA_ARRAY(ep).addr = add)
+ //! Get status to selected endpoint DMA channel
+#define udd_endpoint_dma_get_status(ep) (UOTGHS_UDDMA_ARRAY(ep).status)
+ //! @}
+//! @}
+
+//! @}
+//! @}
+//! @}
+//! @}
+
+
+/// @cond 0
+/**INDENT-OFF**/
+#ifdef __cplusplus
+}
+#endif
+/**INDENT-ON**/
+/// @endcond
+
+#endif /* UOTGHS_DEVICE_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h b/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h
new file mode 100644
index 0000000000..4fb0ba7c1f
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/uotghs_otg.h
@@ -0,0 +1,242 @@
+/**
+ * \file
+ *
+ * \brief USB OTG Driver for UOTGHS.
+ *
+ * Copyright (c) 2012-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef UOTGHS_OTG_H_INCLUDED
+#define UOTGHS_OTG_H_INCLUDED
+
+#include "compiler.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+//! \ingroup usb_group
+//! \defgroup otg_group UOTGHS OTG Driver
+//! UOTGHS low-level driver for OTG features
+//!
+//! @{
+
+/**
+ * \brief Initialize the dual role
+ * This function is implemented in uotghs_host.c file.
+ *
+ * \return \c true if the ID pin management has been started, otherwise \c false.
+ */
+bool otg_dual_enable(void);
+
+/**
+ * \brief Uninitialize the dual role
+ * This function is implemented in uotghs_host.c file.
+ */
+void otg_dual_disable(void);
+
+
+//! @name UOTGHS OTG ID pin management
+//! The ID pin come from the USB OTG connector (A and B receptable) and
+//! allows to select the USB mode host or device.
+//! The UOTGHS hardware can manage it automatically. This feature is optional.
+//! When USB_ID_GPIO is defined (in board.h), this feature is enabled.
+//!
+//! @{
+ //! Enable external OTG_ID pin (listened to by USB)
+#define otg_enable_id_pin() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIDE))
+ //! Disable external OTG_ID pin (ignored by USB)
+#define otg_disable_id_pin() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIDE))
+ //! Test if external OTG_ID pin enabled (listened to by USB)
+#define Is_otg_id_pin_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIDE))
+ //! Disable external OTG_ID pin and force device mode
+#define otg_force_device_mode() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIMOD), otg_disable_id_pin())
+ //! Test if device mode is forced
+#define Is_otg_device_mode_forced() (!Is_otg_id_pin_enabled() && Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIMOD))
+ //! Disable external OTG_ID pin and force host mode
+#define otg_force_host_mode() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIMOD), otg_disable_id_pin())
+ //! Test if host mode is forced
+#define Is_otg_host_mode_forced() (!Is_otg_id_pin_enabled() && !Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UIMOD))
+
+//! @name UOTGHS OTG ID pin interrupt management
+//! These macros manage the ID pin interrupt
+//! @{
+#define otg_enable_id_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_IDTE))
+#define otg_disable_id_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_IDTE))
+#define Is_otg_id_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_IDTE))
+#define Is_otg_id_device() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_ID))
+#define Is_otg_id_host() (!Is_otg_id_device())
+#define otg_ack_id_transition() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_IDTIC)
+#define otg_raise_id_transition() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_IDTIS)
+#define Is_otg_id_transition() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_IDTI))
+//! @}
+//! @}
+
+//! @name OTG Vbus management
+//! @{
+#define otg_enable_vbus_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
+#define otg_disable_vbus_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
+#define Is_otg_vbus_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_VBUSTE))
+#define Is_otg_vbus_high() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUS))
+#define Is_otg_vbus_low() (!Is_otg_vbus_high())
+#define otg_ack_vbus_transition() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_VBUSTIC)
+#define otg_raise_vbus_transition() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_VBUSTIS)
+#define Is_otg_vbus_transition() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
+//! @}
+
+//! @name UOTGHS OTG main management
+//! These macros allows to enable/disable pad and UOTGHS hardware
+//! @{
+ //! Reset USB macro
+#define otg_reset() \
+ do { \
+ UOTGHS->UOTGHS_CTRL = 0; \
+ while( UOTGHS->UOTGHS_SR & 0x3FFF) {\
+ UOTGHS->UOTGHS_SCR = 0xFFFFFFFF;\
+ } \
+ } while (0)
+ //! Enable USB macro
+#define otg_enable() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
+ //! Disable USB macro
+#define otg_disable() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
+#define Is_otg_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_USBE))
+
+ //! Enable OTG pad
+#define otg_enable_pad() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_OTGPADE))
+ //! Disable OTG pad
+#define otg_disable_pad() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_OTGPADE))
+#define Is_otg_pad_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_OTGPADE))
+
+ //! Check Clock Usable
+ //! For parts with HS feature, this one corresponding at UTMI clock
+#define Is_otg_clock_usable() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_CLKUSABLE))
+
+ //! Stop (freeze) internal USB clock
+#define otg_freeze_clock() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK))
+#define otg_unfreeze_clock() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK))
+#define Is_otg_clock_frozen() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK))
+
+ //! Configure time-out of specified OTG timer
+#define otg_configure_timeout(timer, timeout) (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
+ Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\
+ Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk, timeout),\
+ Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK))
+ //! Get configured time-out of specified OTG timer
+#define otg_get_timeout(timer) (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
+ Wr_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMPAGE_Msk, timer),\
+ Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
+ Rd_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk))
+
+
+ //! Get the dual-role device state of the internal USB finite state machine of the UOTGHS controller
+#define otg_get_fsm_drd_state() (Rd_bitfield(UOTGHS->UOTGHS_FSM, UOTGHS_FSM_DRDSTATE_Msk))
+#define Is_otg_a_suspend() (4==otg_get_fsm_drd_state())
+#define Is_otg_a_wait_vrise() (1==otg_get_fsm_drd_state())
+//! @}
+
+//! @name UOTGHS OTG hardware protocol
+//! These macros manages the hardware OTG protocol
+//! @{
+ //! Initiates a Host negotiation Protocol
+#define otg_device_initiate_hnp() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPREQ))
+ //! Accepts a Host negotiation Protocol
+#define otg_host_accept_hnp() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPREQ))
+ //! Rejects a Host negotiation Protocol
+#define otg_host_reject_hnp() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPREQ))
+ //! initiates a Session Request Protocol
+#define otg_device_initiate_srp() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPREQ))
+ //! Selects VBus as SRP method
+#define otg_select_vbus_srp_method() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPSEL))
+#define Is_otg_vbus_srp_method_selected() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPSEL))
+ //! Selects data line as SRP method
+#define otg_select_data_srp_method() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPSEL))
+#define Is_otg_data_srp_method_selected() (!Is_otg_vbus_srp_method_selected())
+ //! Tests if a HNP occurs
+#define Is_otg_hnp() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPREQ))
+ //! Tests if a SRP from device occurs
+#define Is_otg_device_srp() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPREQ))
+
+ //! Enables HNP error interrupt
+#define otg_enable_hnp_error_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPERRE))
+ //! Disables HNP error interrupt
+#define otg_disable_hnp_error_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPERRE))
+#define Is_otg_hnp_error_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_HNPERRE))
+ //! ACKs HNP error interrupt
+#define otg_ack_hnp_error_interrupt() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_HNPERRIC)
+ //! Raises HNP error interrupt
+#define otg_raise_hnp_error_interrupt() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_HNPERRIS)
+ //! Tests if a HNP error occurs
+#define Is_otg_hnp_error_interrupt() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_HNPERRI))
+
+ //! Enables role exchange interrupt
+#define otg_enable_role_exchange_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_ROLEEXE))
+ //! Disables role exchange interrupt
+#define otg_disable_role_exchange_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_ROLEEXE))
+#define Is_otg_role_exchange_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_ROLEEXE))
+ //! ACKs role exchange interrupt
+#define otg_ack_role_exchange_interrupt() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_ROLEEXIC)
+ //! Raises role exchange interrupt
+#define otg_raise_role_exchange_interrupt() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_ROLEEXIS)
+ //! Tests if a role exchange occurs
+#define Is_otg_role_exchange_interrupt() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_ROLEEXI))
+
+ //! Enables SRP interrupt
+#define otg_enable_srp_interrupt() (Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPE))
+ //! Disables SRP interrupt
+#define otg_disable_srp_interrupt() (Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPE))
+#define Is_otg_srp_interrupt_enabled() (Tst_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_SRPE))
+ //! ACKs SRP interrupt
+#define otg_ack_srp_interrupt() (UOTGHS->UOTGHS_SCR = UOTGHS_SCR_SRPIC)
+ //! Raises SRP interrupt
+#define otg_raise_srp_interrupt() (UOTGHS->UOTGHS_SFR = UOTGHS_SFR_SRPIS)
+ //! Tests if a SRP occurs
+#define Is_otg_srp_interrupt() (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_SRPI))
+//! @}
+
+//! @}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* UOTGHS_OTG_H_INCLUDED */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/usb_protocol.h b/Marlin/src/HAL/HAL_DUE/usb/usb_protocol.h
new file mode 100644
index 0000000000..dd5071a5d3
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/usb_protocol.h
@@ -0,0 +1,496 @@
+/**
+ * \file
+ *
+ * \brief USB protocol definitions.
+ *
+ * This file contains the USB definitions and data structures provided by the
+ * USB 2.0 specification.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _USB_PROTOCOL_H_
+#define _USB_PROTOCOL_H_
+
+/**
+ * \ingroup usb_group
+ * \defgroup usb_protocol_group USB Protocol Definitions
+ *
+ * This module defines constants and data structures provided by the USB
+ * 2.0 specification.
+ *
+ * @{
+ */
+
+//! Value for field bcdUSB
+#define USB_V2_0 0x0200 //!< USB Specification version 2.00
+#define USB_V2_1 0x0201 //!< USB Specification version 2.01
+
+/*! \name Generic definitions (Class, subclass and protocol)
+ */
+//! @{
+#define NO_CLASS 0x00
+#define CLASS_VENDOR_SPECIFIC 0xFF
+#define NO_SUBCLASS 0x00
+#define NO_PROTOCOL 0x00
+//! @}
+
+//! \name IAD (Interface Association Descriptor) constants
+//! @{
+#define CLASS_IAD 0xEF
+#define SUB_CLASS_IAD 0x02
+#define PROTOCOL_IAD 0x01
+//! @}
+
+/**
+ * \brief USB request data transfer direction (bmRequestType)
+ */
+#define USB_REQ_DIR_OUT (0<<7) //!< Host to device
+#define USB_REQ_DIR_IN (1<<7) //!< Device to host
+#define USB_REQ_DIR_MASK (1<<7) //!< Mask
+
+/**
+ * \brief USB request types (bmRequestType)
+ */
+#define USB_REQ_TYPE_STANDARD (0<<5) //!< Standard request
+#define USB_REQ_TYPE_CLASS (1<<5) //!< Class-specific request
+#define USB_REQ_TYPE_VENDOR (2<<5) //!< Vendor-specific request
+#define USB_REQ_TYPE_MASK (3<<5) //!< Mask
+
+/**
+ * \brief USB recipient codes (bmRequestType)
+ */
+#define USB_REQ_RECIP_DEVICE (0<<0) //!< Recipient device
+#define USB_REQ_RECIP_INTERFACE (1<<0) //!< Recipient interface
+#define USB_REQ_RECIP_ENDPOINT (2<<0) //!< Recipient endpoint
+#define USB_REQ_RECIP_OTHER (3<<0) //!< Recipient other
+#define USB_REQ_RECIP_MASK (0x1F) //!< Mask
+
+/**
+ * \brief Standard USB requests (bRequest)
+ */
+enum usb_reqid {
+ USB_REQ_GET_STATUS = 0,
+ USB_REQ_CLEAR_FEATURE = 1,
+ USB_REQ_SET_FEATURE = 3,
+ USB_REQ_SET_ADDRESS = 5,
+ USB_REQ_GET_DESCRIPTOR = 6,
+ USB_REQ_SET_DESCRIPTOR = 7,
+ USB_REQ_GET_CONFIGURATION = 8,
+ USB_REQ_SET_CONFIGURATION = 9,
+ USB_REQ_GET_INTERFACE = 10,
+ USB_REQ_SET_INTERFACE = 11,
+ USB_REQ_SYNCH_FRAME = 12,
+};
+
+/**
+ * \brief Standard USB device status flags
+ *
+ */
+enum usb_device_status {
+ USB_DEV_STATUS_BUS_POWERED = 0,
+ USB_DEV_STATUS_SELF_POWERED = 1,
+ USB_DEV_STATUS_REMOTEWAKEUP = 2
+};
+
+/**
+ * \brief Standard USB Interface status flags
+ *
+ */
+enum usb_interface_status {
+ USB_IFACE_STATUS_RESERVED = 0
+};
+
+/**
+ * \brief Standard USB endpoint status flags
+ *
+ */
+enum usb_endpoint_status {
+ USB_EP_STATUS_HALTED = 1,
+};
+
+/**
+ * \brief Standard USB device feature flags
+ *
+ * \note valid for SetFeature request.
+ */
+enum usb_device_feature {
+ USB_DEV_FEATURE_REMOTE_WAKEUP = 1, //!< Remote wakeup enabled
+ USB_DEV_FEATURE_TEST_MODE = 2, //!< USB test mode
+ USB_DEV_FEATURE_OTG_B_HNP_ENABLE = 3,
+ USB_DEV_FEATURE_OTG_A_HNP_SUPPORT = 4,
+ USB_DEV_FEATURE_OTG_A_ALT_HNP_SUPPORT = 5
+};
+
+/**
+ * \brief Test Mode possible on HS USB device
+ *
+ * \note valid for USB_DEV_FEATURE_TEST_MODE request.
+ */
+enum usb_device_hs_test_mode {
+ USB_DEV_TEST_MODE_J = 1,
+ USB_DEV_TEST_MODE_K = 2,
+ USB_DEV_TEST_MODE_SE0_NAK = 3,
+ USB_DEV_TEST_MODE_PACKET = 4,
+ USB_DEV_TEST_MODE_FORCE_ENABLE = 5,
+};
+
+/**
+ * \brief Standard USB endpoint feature/status flags
+ */
+enum usb_endpoint_feature {
+ USB_EP_FEATURE_HALT = 0,
+};
+
+/**
+ * \brief Standard USB Test Mode Selectors
+ */
+enum usb_test_mode_selector {
+ USB_TEST_J = 0x01,
+ USB_TEST_K = 0x02,
+ USB_TEST_SE0_NAK = 0x03,
+ USB_TEST_PACKET = 0x04,
+ USB_TEST_FORCE_ENABLE = 0x05,
+};
+
+/**
+ * \brief Standard USB descriptor types
+ */
+enum usb_descriptor_type {
+ USB_DT_DEVICE = 1,
+ USB_DT_CONFIGURATION = 2,
+ USB_DT_STRING = 3,
+ USB_DT_INTERFACE = 4,
+ USB_DT_ENDPOINT = 5,
+ USB_DT_DEVICE_QUALIFIER = 6,
+ USB_DT_OTHER_SPEED_CONFIGURATION = 7,
+ USB_DT_INTERFACE_POWER = 8,
+ USB_DT_OTG = 9,
+ USB_DT_IAD = 0x0B,
+ USB_DT_BOS = 0x0F,
+ USB_DT_DEVICE_CAPABILITY = 0x10,
+};
+
+/**
+ * \brief USB Device Capability types
+ */
+enum usb_capability_type {
+ USB_DC_USB20_EXTENSION = 0x02,
+};
+
+/**
+ * \brief USB Device Capability - USB 2.0 Extension
+ * To fill bmAttributes field of usb_capa_ext_desc_t structure.
+ */
+enum usb_capability_extension_attr {
+ USB_DC_EXT_LPM = 0x00000002,
+};
+
+#define HIRD_50_US 0
+#define HIRD_125_US 1
+#define HIRD_200_US 2
+#define HIRD_275_US 3
+#define HIRD_350_US 4
+#define HIRD_425_US 5
+#define HIRD_500_US 6
+#define HIRD_575_US 7
+#define HIRD_650_US 8
+#define HIRD_725_US 9
+#define HIRD_800_US 10
+#define HIRD_875_US 11
+#define HIRD_950_US 12
+#define HIRD_1025_US 13
+#define HIRD_1100_US 14
+#define HIRD_1175_US 15
+
+/** Fields definition from a LPM TOKEN */
+#define USB_LPM_ATTRIBUT_BLINKSTATE_MASK (0xF << 0)
+#define USB_LPM_ATTRIBUT_FIRD_MASK (0xF << 4)
+#define USB_LPM_ATTRIBUT_REMOTEWAKE_MASK (1 << 8)
+#define USB_LPM_ATTRIBUT_BLINKSTATE(value) ((value & 0xF) << 0)
+#define USB_LPM_ATTRIBUT_FIRD(value) ((value & 0xF) << 4)
+#define USB_LPM_ATTRIBUT_REMOTEWAKE(value) ((value & 1) << 8)
+#define USB_LPM_ATTRIBUT_BLINKSTATE_L1 USB_LPM_ATTRIBUT_BLINKSTATE(1)
+
+/**
+ * \brief Standard USB endpoint transfer types
+ */
+enum usb_ep_type {
+ USB_EP_TYPE_CONTROL = 0x00,
+ USB_EP_TYPE_ISOCHRONOUS = 0x01,
+ USB_EP_TYPE_BULK = 0x02,
+ USB_EP_TYPE_INTERRUPT = 0x03,
+ USB_EP_TYPE_MASK = 0x03,
+};
+
+/**
+ * \brief Standard USB language IDs for string descriptors
+ */
+enum usb_langid {
+ USB_LANGID_EN_US = 0x0409, //!< English (United States)
+};
+
+/**
+ * \brief Mask selecting the index part of an endpoint address
+ */
+#define USB_EP_ADDR_MASK 0x0f
+
+//! \brief USB address identifier
+typedef uint8_t usb_add_t;
+
+/**
+ * \brief Endpoint transfer direction is IN
+ */
+#define USB_EP_DIR_IN 0x80
+
+/**
+ * \brief Endpoint transfer direction is OUT
+ */
+#define USB_EP_DIR_OUT 0x00
+
+//! \brief Endpoint identifier
+typedef uint8_t usb_ep_t;
+
+/**
+ * \brief Maximum length in bytes of a USB descriptor
+ *
+ * The maximum length of a USB descriptor is limited by the 8-bit
+ * bLength field.
+ */
+#define USB_MAX_DESC_LEN 255
+
+/*
+ * 2-byte alignment requested for all USB structures.
+ */
+COMPILER_PACK_SET(1)
+
+/**
+ * \brief A USB Device SETUP request
+ *
+ * The data payload of SETUP packets always follows this structure.
+ */
+typedef struct {
+ uint8_t bmRequestType;
+ uint8_t bRequest;
+ le16_t wValue;
+ le16_t wIndex;
+ le16_t wLength;
+} usb_setup_req_t;
+
+/**
+ * \brief Standard USB device descriptor structure
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ le16_t bcdUSB;
+ uint8_t bDeviceClass;
+ uint8_t bDeviceSubClass;
+ uint8_t bDeviceProtocol;
+ uint8_t bMaxPacketSize0;
+ le16_t idVendor;
+ le16_t idProduct;
+ le16_t bcdDevice;
+ uint8_t iManufacturer;
+ uint8_t iProduct;
+ uint8_t iSerialNumber;
+ uint8_t bNumConfigurations;
+} usb_dev_desc_t;
+
+/**
+ * \brief Standard USB device qualifier descriptor structure
+ *
+ * This descriptor contains information about the device when running at
+ * the "other" speed (i.e. if the device is currently operating at high
+ * speed, this descriptor can be used to determine what would change if
+ * the device was operating at full speed.)
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ le16_t bcdUSB;
+ uint8_t bDeviceClass;
+ uint8_t bDeviceSubClass;
+ uint8_t bDeviceProtocol;
+ uint8_t bMaxPacketSize0;
+ uint8_t bNumConfigurations;
+ uint8_t bReserved;
+} usb_dev_qual_desc_t;
+
+/**
+ * \brief USB Device BOS descriptor structure
+ *
+ * The BOS descriptor (Binary device Object Store) defines a root
+ * descriptor that is similar to the configuration descriptor, and is
+ * the base descriptor for accessing a family of related descriptors.
+ * A host can read a BOS descriptor and learn from the wTotalLength field
+ * the entire size of the device-level descriptor set, or it can read in
+ * the entire BOS descriptor set of device capabilities.
+ * The host accesses this descriptor using the GetDescriptor() request.
+ * The descriptor type in the GetDescriptor() request is set to BOS.
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ le16_t wTotalLength;
+ uint8_t bNumDeviceCaps;
+} usb_dev_bos_desc_t;
+
+
+/**
+ * \brief USB Device Capabilities - USB 2.0 Extension Descriptor structure
+ *
+ * Defines the set of USB 1.1-specific device level capabilities.
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bDevCapabilityType;
+ le32_t bmAttributes;
+} usb_dev_capa_ext_desc_t;
+
+/**
+ * \brief USB Device LPM Descriptor structure
+ *
+ * The BOS descriptor and capabilities descriptors for LPM.
+ */
+typedef struct {
+ usb_dev_bos_desc_t bos;
+ usb_dev_capa_ext_desc_t capa_ext;
+} usb_dev_lpm_desc_t;
+
+/**
+ * \brief Standard USB Interface Association Descriptor structure
+ */
+typedef struct {
+ uint8_t bLength; //!< size of this descriptor in bytes
+ uint8_t bDescriptorType; //!< INTERFACE descriptor type
+ uint8_t bFirstInterface; //!< Number of interface
+ uint8_t bInterfaceCount; //!< value to select alternate setting
+ uint8_t bFunctionClass; //!< Class code assigned by the USB
+ uint8_t bFunctionSubClass;//!< Sub-class code assigned by the USB
+ uint8_t bFunctionProtocol;//!< Protocol code assigned by the USB
+ uint8_t iFunction; //!< Index of string descriptor
+} usb_association_desc_t;
+
+
+/**
+ * \brief Standard USB configuration descriptor structure
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ le16_t wTotalLength;
+ uint8_t bNumInterfaces;
+ uint8_t bConfigurationValue;
+ uint8_t iConfiguration;
+ uint8_t bmAttributes;
+ uint8_t bMaxPower;
+} usb_conf_desc_t;
+
+
+#define USB_CONFIG_ATTR_MUST_SET (1 << 7) //!< Must always be set
+#define USB_CONFIG_ATTR_BUS_POWERED (0 << 6) //!< Bus-powered
+#define USB_CONFIG_ATTR_SELF_POWERED (1 << 6) //!< Self-powered
+#define USB_CONFIG_ATTR_REMOTE_WAKEUP (1 << 5) //!< remote wakeup supported
+
+#define USB_CONFIG_MAX_POWER(ma) (((ma) + 1) / 2) //!< Max power in mA
+
+/**
+ * \brief Standard USB association descriptor structure
+ */
+typedef struct {
+ uint8_t bLength; //!< Size of this descriptor in bytes
+ uint8_t bDescriptorType; //!< Interface descriptor type
+ uint8_t bFirstInterface; //!< Number of interface
+ uint8_t bInterfaceCount; //!< value to select alternate setting
+ uint8_t bFunctionClass; //!< Class code assigned by the USB
+ uint8_t bFunctionSubClass; //!< Sub-class code assigned by the USB
+ uint8_t bFunctionProtocol; //!< Protocol code assigned by the USB
+ uint8_t iFunction; //!< Index of string descriptor
+} usb_iad_desc_t;
+
+/**
+ * \brief Standard USB interface descriptor structure
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bInterfaceNumber;
+ uint8_t bAlternateSetting;
+ uint8_t bNumEndpoints;
+ uint8_t bInterfaceClass;
+ uint8_t bInterfaceSubClass;
+ uint8_t bInterfaceProtocol;
+ uint8_t iInterface;
+} usb_iface_desc_t;
+
+/**
+ * \brief Standard USB endpoint descriptor structure
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+ uint8_t bEndpointAddress;
+ uint8_t bmAttributes;
+ le16_t wMaxPacketSize;
+ uint8_t bInterval;
+} usb_ep_desc_t;
+
+
+/**
+ * \brief A standard USB string descriptor structure
+ */
+typedef struct {
+ uint8_t bLength;
+ uint8_t bDescriptorType;
+} usb_str_desc_t;
+
+typedef struct {
+ usb_str_desc_t desc;
+ le16_t string[1];
+} usb_str_lgid_desc_t;
+
+COMPILER_PACK_RESET()
+
+//! @}
+
+#endif /* _USB_PROTOCOL_H_ */
diff --git a/Marlin/src/HAL/HAL_DUE/usb/usb_protocol_cdc.h b/Marlin/src/HAL/HAL_DUE/usb/usb_protocol_cdc.h
new file mode 100644
index 0000000000..875e7e4dda
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/usb_protocol_cdc.h
@@ -0,0 +1,318 @@
+/**
+ * \file
+ *
+ * \brief USB Communication Device Class (CDC) protocol definitions
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+#ifndef _USB_PROTOCOL_CDC_H_
+#define _USB_PROTOCOL_CDC_H_
+
+#include "compiler.h"
+
+/**
+ * \ingroup usb_protocol_group
+ * \defgroup cdc_protocol_group Communication Device Class Definitions
+ * @{
+ */
+
+/**
+ * \name Possible values of class
+ */
+//@{
+#define CDC_CLASS_DEVICE 0x02 //!< USB Communication Device Class
+#define CDC_CLASS_COMM 0x02 //!< CDC Communication Class Interface
+#define CDC_CLASS_DATA 0x0A //!< CDC Data Class Interface
+//@}
+
+//! \name USB CDC Subclass IDs
+//@{
+#define CDC_SUBCLASS_DLCM 0x01 //!< Direct Line Control Model
+#define CDC_SUBCLASS_ACM 0x02 //!< Abstract Control Model
+#define CDC_SUBCLASS_TCM 0x03 //!< Telephone Control Model
+#define CDC_SUBCLASS_MCCM 0x04 //!< Multi-Channel Control Model
+#define CDC_SUBCLASS_CCM 0x05 //!< CAPI Control Model
+#define CDC_SUBCLASS_ETH 0x06 //!< Ethernet Networking Control Model
+#define CDC_SUBCLASS_ATM 0x07 //!< ATM Networking Control Model
+//@}
+
+//! \name USB CDC Communication Interface Protocol IDs
+//@{
+#define CDC_PROTOCOL_V25TER 0x01 //!< Common AT commands
+//@}
+
+//! \name USB CDC Data Interface Protocol IDs
+//@{
+#define CDC_PROTOCOL_I430 0x30 //!< ISDN BRI
+#define CDC_PROTOCOL_HDLC 0x31 //!< HDLC
+#define CDC_PROTOCOL_TRANS 0x32 //!< Transparent
+#define CDC_PROTOCOL_Q921M 0x50 //!< Q.921 management protocol
+#define CDC_PROTOCOL_Q921 0x51 //!< Q.931 [sic] Data link protocol
+#define CDC_PROTOCOL_Q921TM 0x52 //!< Q.921 TEI-multiplexor
+#define CDC_PROTOCOL_V42BIS 0x90 //!< Data compression procedures
+#define CDC_PROTOCOL_Q931 0x91 //!< Euro-ISDN protocol control
+#define CDC_PROTOCOL_V120 0x92 //!< V.24 rate adaption to ISDN
+#define CDC_PROTOCOL_CAPI20 0x93 //!< CAPI Commands
+#define CDC_PROTOCOL_HOST 0xFD //!< Host based driver
+/**
+ * \brief Describes the Protocol Unit Functional Descriptors [sic]
+ * on Communication Class Interface
+ */
+#define CDC_PROTOCOL_PUFD 0xFE
+//@}
+
+//! \name USB CDC Functional Descriptor Types
+//@{
+#define CDC_CS_INTERFACE 0x24 //!< Interface Functional Descriptor
+#define CDC_CS_ENDPOINT 0x25 //!< Endpoint Functional Descriptor
+//@}
+
+//! \name USB CDC Functional Descriptor Subtypes
+//@{
+#define CDC_SCS_HEADER 0x00 //!< Header Functional Descriptor
+#define CDC_SCS_CALL_MGMT 0x01 //!< Call Management
+#define CDC_SCS_ACM 0x02 //!< Abstract Control Management
+#define CDC_SCS_UNION 0x06 //!< Union Functional Descriptor
+//@}
+
+//! \name USB CDC Request IDs
+//@{
+#define USB_REQ_CDC_SEND_ENCAPSULATED_COMMAND 0x00
+#define USB_REQ_CDC_GET_ENCAPSULATED_RESPONSE 0x01
+#define USB_REQ_CDC_SET_COMM_FEATURE 0x02
+#define USB_REQ_CDC_GET_COMM_FEATURE 0x03
+#define USB_REQ_CDC_CLEAR_COMM_FEATURE 0x04
+#define USB_REQ_CDC_SET_AUX_LINE_STATE 0x10
+#define USB_REQ_CDC_SET_HOOK_STATE 0x11
+#define USB_REQ_CDC_PULSE_SETUP 0x12
+#define USB_REQ_CDC_SEND_PULSE 0x13
+#define USB_REQ_CDC_SET_PULSE_TIME 0x14
+#define USB_REQ_CDC_RING_AUX_JACK 0x15
+#define USB_REQ_CDC_SET_LINE_CODING 0x20
+#define USB_REQ_CDC_GET_LINE_CODING 0x21
+#define USB_REQ_CDC_SET_CONTROL_LINE_STATE 0x22
+#define USB_REQ_CDC_SEND_BREAK 0x23
+#define USB_REQ_CDC_SET_RINGER_PARMS 0x30
+#define USB_REQ_CDC_GET_RINGER_PARMS 0x31
+#define USB_REQ_CDC_SET_OPERATION_PARMS 0x32
+#define USB_REQ_CDC_GET_OPERATION_PARMS 0x33
+#define USB_REQ_CDC_SET_LINE_PARMS 0x34
+#define USB_REQ_CDC_GET_LINE_PARMS 0x35
+#define USB_REQ_CDC_DIAL_DIGITS 0x36
+#define USB_REQ_CDC_SET_UNIT_PARAMETER 0x37
+#define USB_REQ_CDC_GET_UNIT_PARAMETER 0x38
+#define USB_REQ_CDC_CLEAR_UNIT_PARAMETER 0x39
+#define USB_REQ_CDC_GET_PROFILE 0x3A
+#define USB_REQ_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40
+#define USB_REQ_CDC_SET_ETHERNET_POWER_MANAGEMENT_PATTERNFILTER 0x41
+#define USB_REQ_CDC_GET_ETHERNET_POWER_MANAGEMENT_PATTERNFILTER 0x42
+#define USB_REQ_CDC_SET_ETHERNET_PACKET_FILTER 0x43
+#define USB_REQ_CDC_GET_ETHERNET_STATISTIC 0x44
+#define USB_REQ_CDC_SET_ATM_DATA_FORMAT 0x50
+#define USB_REQ_CDC_GET_ATM_DEVICE_STATISTICS 0x51
+#define USB_REQ_CDC_SET_ATM_DEFAULT_VC 0x52
+#define USB_REQ_CDC_GET_ATM_VC_STATISTICS 0x53
+// Added bNotification codes according cdc spec 1.1 chapter 6.3
+#define USB_REQ_CDC_NOTIFY_RING_DETECT 0x09
+#define USB_REQ_CDC_NOTIFY_SERIAL_STATE 0x20
+#define USB_REQ_CDC_NOTIFY_CALL_STATE_CHANGE 0x28
+#define USB_REQ_CDC_NOTIFY_LINE_STATE_CHANGE 0x29
+//@}
+
+/*
+ * Need to pack structures tightly, or the compiler might insert padding
+ * and violate the spec-mandated layout.
+ */
+COMPILER_PACK_SET(1)
+
+//! \name USB CDC Descriptors
+//@{
+
+
+//! CDC Header Functional Descriptor
+typedef struct {
+ uint8_t bFunctionLength;
+ uint8_t bDescriptorType;
+ uint8_t bDescriptorSubtype;
+ le16_t bcdCDC;
+} usb_cdc_hdr_desc_t;
+
+//! CDC Call Management Functional Descriptor
+typedef struct {
+ uint8_t bFunctionLength;
+ uint8_t bDescriptorType;
+ uint8_t bDescriptorSubtype;
+ uint8_t bmCapabilities;
+ uint8_t bDataInterface;
+} usb_cdc_call_mgmt_desc_t;
+
+//! CDC ACM Functional Descriptor
+typedef struct {
+ uint8_t bFunctionLength;
+ uint8_t bDescriptorType;
+ uint8_t bDescriptorSubtype;
+ uint8_t bmCapabilities;
+} usb_cdc_acm_desc_t;
+
+//! CDC Union Functional Descriptor
+typedef struct {
+ uint8_t bFunctionLength;
+ uint8_t bDescriptorType;
+ uint8_t bDescriptorSubtype;
+ uint8_t bMasterInterface;
+ uint8_t bSlaveInterface0;
+} usb_cdc_union_desc_t;
+
+
+//! \name USB CDC Call Management Capabilities
+//@{
+//! Device handles call management itself
+#define CDC_CALL_MGMT_SUPPORTED (1 << 0)
+//! Device can send/receive call management info over a Data Class interface
+#define CDC_CALL_MGMT_OVER_DCI (1 << 1)
+//@}
+
+//! \name USB CDC ACM Capabilities
+//@{
+//! Device supports the request combination of
+//! Set_Comm_Feature, Clear_Comm_Feature, and Get_Comm_Feature.
+#define CDC_ACM_SUPPORT_FEATURE_REQUESTS (1 << 0)
+//! Device supports the request combination of
+//! Set_Line_Coding, Set_Control_Line_State, Get_Line_Coding,
+//! and the notification Serial_State.
+#define CDC_ACM_SUPPORT_LINE_REQUESTS (1 << 1)
+//! Device supports the request Send_Break
+#define CDC_ACM_SUPPORT_SENDBREAK_REQUESTS (1 << 2)
+//! Device supports the notification Network_Connection.
+#define CDC_ACM_SUPPORT_NOTIFY_REQUESTS (1 << 3)
+//@}
+//@}
+
+//! \name USB CDC line control
+//@{
+
+//! \name USB CDC line coding
+//@{
+//! Line Coding structure
+typedef struct {
+ le32_t dwDTERate;
+ uint8_t bCharFormat;
+ uint8_t bParityType;
+ uint8_t bDataBits;
+} usb_cdc_line_coding_t;
+//! Possible values of bCharFormat
+enum cdc_char_format {
+ CDC_STOP_BITS_1 = 0, //!< 1 stop bit
+ CDC_STOP_BITS_1_5 = 1, //!< 1.5 stop bits
+ CDC_STOP_BITS_2 = 2, //!< 2 stop bits
+};
+//! Possible values of bParityType
+enum cdc_parity {
+ CDC_PAR_NONE = 0, //!< No parity
+ CDC_PAR_ODD = 1, //!< Odd parity
+ CDC_PAR_EVEN = 2, //!< Even parity
+ CDC_PAR_MARK = 3, //!< Parity forced to 0 (space)
+ CDC_PAR_SPACE = 4, //!< Parity forced to 1 (mark)
+};
+//@}
+
+//! \name USB CDC control signals
+//! spec 1.1 chapter 6.2.14
+//@{
+
+//! Control signal structure
+typedef struct {
+ uint16_t value;
+} usb_cdc_control_signal_t;
+
+//! \name Possible values in usb_cdc_control_signal_t
+//@{
+//! Carrier control for half duplex modems.
+//! This signal corresponds to V.24 signal 105 and RS-232 signal RTS.
+//! The device ignores the value of this bit
+//! when operating in full duplex mode.
+#define CDC_CTRL_SIGNAL_ACTIVATE_CARRIER (1 << 1)
+//! Indicates to DCE if DTE is present or not.
+//! This signal corresponds to V.24 signal 108/2 and RS-232 signal DTR.
+#define CDC_CTRL_SIGNAL_DTE_PRESENT (1 << 0)
+//@}
+//@}
+
+
+//! \name USB CDC notification message
+//@{
+
+typedef struct {
+ uint8_t bmRequestType;
+ uint8_t bNotification;
+ le16_t wValue;
+ le16_t wIndex;
+ le16_t wLength;
+} usb_cdc_notify_msg_t;
+
+//! \name USB CDC serial state
+//@{*
+
+//! Hardware handshake support (cdc spec 1.1 chapter 6.3.5)
+typedef struct {
+ usb_cdc_notify_msg_t header;
+ le16_t value;
+} usb_cdc_notify_serial_state_t;
+
+//! \name Possible values in usb_cdc_notify_serial_state_t
+//@{
+#define CDC_SERIAL_STATE_DCD CPU_TO_LE16((1<<0))
+#define CDC_SERIAL_STATE_DSR CPU_TO_LE16((1<<1))
+#define CDC_SERIAL_STATE_BREAK CPU_TO_LE16((1<<2))
+#define CDC_SERIAL_STATE_RING CPU_TO_LE16((1<<3))
+#define CDC_SERIAL_STATE_FRAMING CPU_TO_LE16((1<<4))
+#define CDC_SERIAL_STATE_PARITY CPU_TO_LE16((1<<5))
+#define CDC_SERIAL_STATE_OVERRUN CPU_TO_LE16((1<<6))
+//@}
+//! @}
+
+//! @}
+
+COMPILER_PACK_RESET()
+
+//! @}
+
+#endif // _USB_PROTOCOL_CDC_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/usb_protocol_msc.h b/Marlin/src/HAL/HAL_DUE/usb/usb_protocol_msc.h
new file mode 100644
index 0000000000..d5312328f2
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/usb_protocol_msc.h
@@ -0,0 +1,147 @@
+/**
+ * \file
+ *
+ * \brief USB Mass Storage Class (MSC) protocol definitions.
+ *
+ * Copyright (c) 2009-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _USB_PROTOCOL_MSC_H_
+#define _USB_PROTOCOL_MSC_H_
+
+
+/**
+ * \ingroup usb_protocol_group
+ * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
+ *
+ * @{
+ */
+
+/**
+ * \name Possible Class value
+ */
+//@{
+#define MSC_CLASS 0x08
+//@}
+
+/**
+ * \name Possible SubClass value
+ * \note In practise, most devices should use
+ * #MSC_SUBCLASS_TRANSPARENT and specify the actual command set in
+ * the standard INQUIRY data block, even if the MSC spec indicates
+ * otherwise. In particular, RBC is not supported by certain major
+ * operating systems like Windows XP.
+ */
+//@{
+#define MSC_SUBCLASS_RBC 0x01 //!< Reduced Block Commands
+#define MSC_SUBCLASS_ATAPI 0x02 //!< CD/DVD devices
+#define MSC_SUBCLASS_QIC_157 0x03 //!< Tape devices
+#define MSC_SUBCLASS_UFI 0x04 //!< Floppy disk drives
+#define MSC_SUBCLASS_SFF_8070I 0x05 //!< Floppy disk drives
+#define MSC_SUBCLASS_TRANSPARENT 0x06 //!< Determined by INQUIRY
+//@}
+
+/**
+ * \name Possible protocol value
+ * \note Only the BULK protocol should be used in new designs.
+ */
+//@{
+#define MSC_PROTOCOL_CBI 0x00 //!< Command/Bulk/Interrupt
+#define MSC_PROTOCOL_CBI_ALT 0x01 //!< W/o command completion
+#define MSC_PROTOCOL_BULK 0x50 //!< Bulk-only
+//@}
+
+
+/**
+ * \brief MSC USB requests (bRequest)
+ */
+enum usb_reqid_msc {
+ USB_REQ_MSC_BULK_RESET = 0xFF, //!< Mass Storage Reset
+ USB_REQ_MSC_GET_MAX_LUN = 0xFE, //!< Get Max LUN
+};
+
+
+COMPILER_PACK_SET(1)
+
+/**
+ * \name A Command Block Wrapper (CBW).
+ */
+//@{
+struct usb_msc_cbw {
+ le32_t dCBWSignature; //!< Must contain 'USBC'
+ le32_t dCBWTag; //!< Unique command ID
+ le32_t dCBWDataTransferLength; //!< Number of bytes to transfer
+ uint8_t bmCBWFlags; //!< Direction in bit 7
+ uint8_t bCBWLUN; //!< Logical Unit Number
+ uint8_t bCBWCBLength; //!< Number of valid CDB bytes
+ uint8_t CDB[16]; //!< SCSI Command Descriptor Block
+};
+
+#define USB_CBW_SIGNATURE 0x55534243 //!< dCBWSignature value
+#define USB_CBW_DIRECTION_IN (1<<7) //!< Data from device to host
+#define USB_CBW_DIRECTION_OUT (0<<7) //!< Data from host to device
+#define USB_CBW_LUN_MASK 0x0F //!< Valid bits in bCBWLUN
+#define USB_CBW_LEN_MASK 0x1F //!< Valid bits in bCBWCBLength
+//@}
+
+
+/**
+ * \name A Command Status Wrapper (CSW).
+ */
+//@{
+struct usb_msc_csw {
+ le32_t dCSWSignature; //!< Must contain 'USBS'
+ le32_t dCSWTag; //!< Same as dCBWTag
+ le32_t dCSWDataResidue; //!< Number of bytes not transfered
+ uint8_t bCSWStatus; //!< Status code
+};
+
+#define USB_CSW_SIGNATURE 0x55534253 //!< dCSWSignature value
+#define USB_CSW_STATUS_PASS 0x00 //!< Command Passed
+#define USB_CSW_STATUS_FAIL 0x01 //!< Command Failed
+#define USB_CSW_STATUS_PE 0x02 //!< Phase Error
+//@}
+
+COMPILER_PACK_RESET()
+
+//@}
+
+#endif // _USB_PROTOCOL_MSC_H_
diff --git a/Marlin/src/HAL/HAL_DUE/usb/usb_task.c b/Marlin/src/HAL/HAL_DUE/usb/usb_task.c
new file mode 100644
index 0000000000..af5a2e96f8
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/usb_task.c
@@ -0,0 +1,186 @@
+/**
+ * \file
+ *
+ * \brief Main functions for USB composite example
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "conf_usb.h"
+#include "udc.h"
+
+static volatile bool main_b_msc_enable = false;
+static volatile bool main_b_cdc_enable = false;
+
+void HAL_init(void) {
+ udd_disable();
+ UDD_SetStack(&USBD_ISR);
+
+ // Start USB stack to authorize VBus monitoring
+ udc_start();
+}
+
+void HAL_idletask(void)
+{
+
+ // Attend SD card access from the USB MSD -- Priotize access to improve speed
+ int delay = 2;
+ while (main_b_msc_enable && --delay > 0 ) {
+ if (udi_msc_process_trans()) {
+ delay = 10000;
+ }
+
+ /* Reset the watchdog, just to be sure */
+ REG_WDT_CR = WDT_CR_WDRSTT | WDT_CR_KEY(0xA5);
+ }
+}
+
+/*! \brief Example of extra USB string management
+ * This feature is available for single or composite device
+ * which want implement additional USB string than
+ * Manufacture, Product and serial number ID.
+ *
+ * return true, if the string ID requested is know and managed by this functions
+ */
+bool usb_task_extra_string(void)
+{
+ static uint8_t udi_cdc_name[] = "CDC interface";
+ static uint8_t udi_msc_name[] = "MSC interface";
+
+ struct extra_strings_desc_t{
+ usb_str_desc_t header;
+ le16_t string[Max(sizeof(udi_cdc_name)-1, sizeof(udi_msc_name)-1)];
+ };
+ static UDC_DESC_STORAGE struct extra_strings_desc_t extra_strings_desc = {
+ .header.bDescriptorType = USB_DT_STRING
+ };
+
+ uint8_t i;
+ uint8_t *str;
+ uint8_t str_lgt=0;
+
+ // Link payload pointer to the string corresponding at request
+ switch (udd_g_ctrlreq.req.wValue & 0xff) {
+ case UDI_CDC_IAD_STRING_ID:
+ str_lgt = sizeof(udi_cdc_name)-1;
+ str = udi_cdc_name;
+ break;
+ case UDI_MSC_STRING_ID:
+ str_lgt = sizeof(udi_msc_name)-1;
+ str = udi_msc_name;
+ break;
+ default:
+ return false;
+ }
+
+ if (str_lgt!=0) {
+ for( i=0; i udd_g_ctrlreq.req.wLength) {
+ udd_g_ctrlreq.payload_size = udd_g_ctrlreq.req.wLength;
+ }
+ return true;
+}
+
+bool usb_task_msc_enable(void)
+{
+ main_b_msc_enable = true;
+ return true;
+}
+
+void usb_task_msc_disable(void)
+{
+ main_b_msc_enable = false;
+}
+
+bool usb_task_msc_isenabled(void)
+{
+ return main_b_msc_enable;
+}
+
+bool usb_task_cdc_enable(uint8_t port)
+{
+ main_b_cdc_enable = true;
+ return true;
+}
+
+void usb_task_cdc_disable(uint8_t port)
+{
+ main_b_cdc_enable = false;
+}
+
+bool usb_task_cdc_isenabled(void)
+{
+ return main_b_cdc_enable;
+}
+
+/*! \brief Called by CDC interface
+ * Callback running when CDC device have received data
+ */
+void usb_task_cdc_rx_notify(uint8_t port)
+{
+}
+
+/*! \brief Configures communication line
+ *
+ * \param cfg line configuration
+ */
+void usb_task_cdc_config(uint8_t port, usb_cdc_line_coding_t * cfg)
+{
+}
+
+void usb_task_cdc_set_dtr(uint8_t port, bool b_enable)
+{
+ if (b_enable) {
+ } else {
+ }
+}
+
+#endif
\ No newline at end of file
diff --git a/Marlin/src/HAL/HAL_DUE/usb/usb_task.h b/Marlin/src/HAL/HAL_DUE/usb/usb_task.h
new file mode 100644
index 0000000000..01f498fb96
--- /dev/null
+++ b/Marlin/src/HAL/HAL_DUE/usb/usb_task.h
@@ -0,0 +1,101 @@
+/**
+ * \file
+ *
+ * \brief Declaration of main function used by Composite example 4
+ *
+ * Copyright (c) 2011-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ * Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit Atmel Support
+ */
+
+#ifndef _USB_TASK_H_
+#define _USB_TASK_H_
+
+#include "usb_protocol_cdc.h"
+
+/*! \brief Called by MSC interface
+ * Callback running when USB Host enable MSC interface
+ *
+ * \retval true if MSC startup is ok
+ */
+bool usb_task_msc_enable(void);
+
+/*! \brief Called by MSC interface
+ * Callback running when USB Host disable MSC interface
+ */
+void usb_task_msc_disable(void);
+
+/*! \brief Opens the communication port
+ * This is called by CDC interface when USB Host enable it.
+ *
+ * \retval true if cdc startup is successfully done
+ */
+bool usb_task_cdc_enable(uint8_t port);
+
+/*! \brief Closes the communication port
+ * This is called by CDC interface when USB Host disable it.
+ */
+void usb_task_cdc_disable(uint8_t port);
+
+/*! \brief Save new DTR state to change led behavior.
+ * The DTR notify that the terminal have open or close the communication port.
+ */
+void usb_task_cdc_set_dtr(uint8_t port, bool b_enable);
+
+/*! \brief Called by UDC when USB Host request a extra string different
+ * of this specified in USB device descriptor
+ */
+bool usb_task_extra_string(void);
+
+/*! \brief Called by CDC interface
+ * Callback running when CDC device have received data
+ */
+void usb_task_cdc_rx_notify(uint8_t port);
+
+/*! \brief Configures communication line
+ *
+ * \param cfg line configuration
+ */
+void usb_task_cdc_config(uint8_t port, usb_cdc_line_coding_t * cfg);
+
+/* The USB device interrupt
+ */
+void USBD_ISR(void);
+
+#endif // _MAIN_H_
diff --git a/Marlin/src/Marlin.cpp b/Marlin/src/Marlin.cpp
index 05fa8136b8..3568b68ec5 100644
--- a/Marlin/src/Marlin.cpp
+++ b/Marlin/src/Marlin.cpp
@@ -637,6 +637,10 @@ void stop() {
*/
void setup() {
+ #ifdef HAL_INIT
+ HAL_init();
+ #endif
+
#if ENABLED(MAX7219_DEBUG)
Max7219_init();
#endif