zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Merge branch 'Marlin_v1' of https://github.com/dob71/Marlin into Marlin_v1

Browse source
This commit is contained in:
Erik van der Zalm 2011-12-07 19:57:39 +01:00
parent 43f5c3e82b 4fd75dc813
commit 3664ed6aad
12 changed files with 703 additions and 548 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

72
Marlin/Configuration.h
View file

@ -4,11 +4,11 @@
// This determines the communication speed of the printer // This determines the communication speed of the printer
#define BAUDRATE 250000 //#define BAUDRATE 250000
//#define BAUDRATE 115200 #define BAUDRATE 115200
//#define BAUDRATE 230400 //#define BAUDRATE 230400
#define EXTRUDERS 1 #define EXTRUDERS 2
// Frequency limit // Frequency limit
// See nophead's blog for more info // See nophead's blog for more info
@ -32,7 +32,7 @@
// Sanguinololu 1.2 and above = 62 // Sanguinololu 1.2 and above = 62
// Ultimaker = 7, // Ultimaker = 7,
// Teensylu = 8 // Teensylu = 8
#define MOTHERBOARD 7 #define MOTHERBOARD 33
//=========================================================================== //===========================================================================
//=============================Thermal Settings ============================ //=============================Thermal Settings ============================
@ -46,17 +46,16 @@
// 5 is ParCan supplied 104GT-2 100K // 5 is ParCan supplied 104GT-2 100K
// 6 is EPCOS 100k // 6 is EPCOS 100k
// 7 is 100k Honeywell thermistor 135-104LAG-J01 // 7 is 100k Honeywell thermistor 135-104LAG-J01
//#define THERMISTORHEATER_0 3 #define THERMISTORHEATER_0 1
//#define THERMISTORHEATER_1 3 #define THERMISTORHEATER_1 1
//#define THERMISTORBED 3 #define HEATER_0_USES_THERMISTOR
#define HEATER_1_USES_THERMISTOR
//#define HEATER_0_USES_THERMISTOR //#define HEATER_0_USES_AD595
//#define HEATER_1_USES_THERMISTOR
#define HEATER_0_USES_AD595
//#define HEATER_1_USES_AD595 //#define HEATER_1_USES_AD595
// Select one of these only to define how the bed temp is read. // Select one of these only to define how the bed temp is read.
//#define BED_USES_THERMISTOR #define THERMISTORBED 1
#define BED_USES_THERMISTOR
//#define BED_USES_AD595 //#define BED_USES_AD595
#define BED_CHECK_INTERVAL 5000 //ms #define BED_CHECK_INTERVAL 5000 //ms
@ -68,13 +67,13 @@
//#define WATCHPERIOD 5000 //5 seconds //#define WATCHPERIOD 5000 //5 seconds
// Actual temperature must be close to target for this long before M109 returns success // Actual temperature must be close to target for this long before M109 returns success
//#define TEMP_RESIDENCY_TIME 20 // (seconds) #define TEMP_RESIDENCY_TIME 30 // (seconds)
//#define TEMP_HYSTERESIS 5 // (C°) range of +/- temperatures considered "close" to the target one #define TEMP_HYSTERESIS 3 // (C°) range of +/- temperatures considered "close" to the target one
//// The minimal temperature defines the temperature below which the heater will not be enabled //// The minimal temperature defines the temperature below which the heater will not be enabled
#define HEATER_0_MINTEMP 5 #define HEATER_0_MINTEMP 5
//#define HEATER_1_MINTEMP 5 //#define HEATER_1_MINTEMP 5
//#define BED_MINTEMP 5 #define BED_MINTEMP 5
// When temperature exceeds max temp, your heater will be switched off. // When temperature exceeds max temp, your heater will be switched off.
@ -82,7 +81,7 @@
// You should use MINTEMP for thermistor short/failure protection. // You should use MINTEMP for thermistor short/failure protection.
#define HEATER_0_MAXTEMP 275 #define HEATER_0_MAXTEMP 275
//#define HEATER_1_MAXTEMP 275 //#define HEATER_1_MAXTEMP 275
//#define BED_MAXTEMP 150 #define BED_MAXTEMP 150
// Wait for Cooldown // Wait for Cooldown
@ -131,9 +130,14 @@
// #define DEFAULT_Kd (PID_SWING_AT_CRITIAL/8./PID_dT) // #define DEFAULT_Kd (PID_SWING_AT_CRITIAL/8./PID_dT)
// Ultitmaker // Ultitmaker
#define DEFAULT_Kp 22.2 // #define DEFAULT_Kp 22.2
#define DEFAULT_Ki (1.25*PID_dT) // #define DEFAULT_Ki (1.25*PID_dT)
#define DEFAULT_Kd (99/PID_dT) // #define DEFAULT_Kd (99/PID_dT)
// Makergear
#define DEFAULT_Kp 7.0
#define DEFAULT_Ki 0.1
#define DEFAULT_Kd 12
// Mendel Parts V9 on 12V // Mendel Parts V9 on 12V
// #define DEFAULT_Kp 63.0 // #define DEFAULT_Kp 63.0
@ -152,7 +156,7 @@
// if Kc is choosen well, the additional required power due to increased melting should be compensated. // if Kc is choosen well, the additional required power due to increased melting should be compensated.
#define PID_ADD_EXTRUSION_RATE #define PID_ADD_EXTRUSION_RATE
#ifdef PID_ADD_EXTRUSION_RATE #ifdef PID_ADD_EXTRUSION_RATE
#define DEFAULT_Kc (3) //heatingpower=Kc*(e_speed) #define DEFAULT_Kc (1) //heatingpower=Kc*(e_speed)
#endif #endif
#endif // PIDTEMP #endif // PIDTEMP
@ -164,10 +168,11 @@
// Endstop Settings // Endstop Settings
#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors #define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
// The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins. // The pullups are needed if you directly connect a mechanical endswitch between the signal and ground pins.
const bool X_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. const bool X_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
const bool Y_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. const bool Y_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of the endstops. const bool Z_ENDSTOPS_INVERTING = false; // set to true to invert the logic of the endstops.
// For optos H21LOB set to true, for Mendel-Parts newer optos TCST2103 set to false // For optos H21LOB set to true, for Mendel-Parts newer optos TCST2103 set to false
//#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing //#define ENDSTOPS_ONLY_FOR_HOMING // If defined the endstops will only be used for homing
@ -176,24 +181,26 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
#define X_ENABLE_ON 0 #define X_ENABLE_ON 0
#define Y_ENABLE_ON 0 #define Y_ENABLE_ON 0
#define Z_ENABLE_ON 0 #define Z_ENABLE_ON 0
#define E_ENABLE_ON 0 #define E_ENABLE_ON 0 // For all extruders
// Disables axis when it's not being used. // Disables axis when it's not being used.
#define DISABLE_X false #define DISABLE_X false
#define DISABLE_Y false #define DISABLE_Y false
#define DISABLE_Z false #define DISABLE_Z true
#define DISABLE_E false #define DISABLE_E false // For all extruders
// Inverting axis direction // Inverting axis direction
//#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true //#define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
//#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false //#define INVERT_Y_DIR true // for Mendel set to true, for Orca set to false
//#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true //#define INVERT_Z_DIR false // for Mendel set to false, for Orca set to true
//#define INVERT_E_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false //#define INVERT_E*_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false, used for all extruders
#define INVERT_X_DIR true // for Mendel set to false, for Orca set to true #define INVERT_X_DIR false // for Mendel set to false, for Orca set to true
#define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false #define INVERT_Y_DIR false // for Mendel set to true, for Orca set to false
#define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true #define INVERT_Z_DIR true // for Mendel set to false, for Orca set to true
#define INVERT_E_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false #define INVERT_E0_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E1_DIR true // for direct drive extruder v9 set to true, for geared extruder set to false
#define INVERT_E2_DIR false // for direct drive extruder v9 set to true, for geared extruder set to false
//// ENDSTOP SETTINGS: //// ENDSTOP SETTINGS:
// Sets direction of endstops when homing; 1=MAX, -1=MIN // Sets direction of endstops when homing; 1=MAX, -1=MIN
@ -209,7 +216,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
//// MOVEMENT SETTINGS //// MOVEMENT SETTINGS
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
#define HOMING_FEEDRATE {50*60, 50*60, 4*60, 0} // set the homing speeds (mm/min) #define HOMING_FEEDRATE {30*60, 30*60, 2*60, 0} // set the homing speeds (mm/min)
//homing hits the endstop, then retracts by this distance, before it tries to slowly bump again: //homing hits the endstop, then retracts by this distance, before it tries to slowly bump again:
#define X_HOME_RETRACT_MM 5 #define X_HOME_RETRACT_MM 5
@ -223,8 +230,9 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
// default settings // default settings
#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker //#define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker
//#define DEFAULT_AXIS_STEPS_PER_UNIT {40, 40, 3333.92, 67} //sells mendel with v9 extruder //#define DEFAULT_AXIS_STEPS_PER_UNIT {40, 40, 3333.92, 67} //sells mendel with v9 extruder
#define DEFAULT_AXIS_STEPS_PER_UNIT {80.3232, 80.8900, 2284.7651, 757.2218} // SAE Prusa w/ Wade extruder
#define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec) #define DEFAULT_MAX_FEEDRATE {500, 500, 5, 45} // (mm/sec)
#define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot. #define DEFAULT_MAX_ACCELERATION {9000,9000,100,10000} // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for skeinforge 40+, for older versions raise them a lot.
@ -290,7 +298,7 @@ const bool Z_ENDSTOPS_INVERTING = true; // set to true to invert the logic of th
//LCD and SD support //LCD and SD support
//#define ULTRA_LCD //general lcd support, also 16x2 //#define ULTRA_LCD //general lcd support, also 16x2
//#define SDSUPPORT // Enable SD Card Support in Hardware Console #define SDSUPPORT // Enable SD Card Support in Hardware Console
#define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers? #define SD_FINISHED_STEPPERRELEASE true //if sd support and the file is finished: disable steppers?
//#define ULTIPANEL //#define ULTIPANEL

32
Marlin/Marlin.h
View file

@ -57,6 +57,8 @@ const prog_char echomagic[] PROGMEM ="echo:";
#define SERIAL_ECHOPAIR(name,value) {SERIAL_ECHOPGM(name);SERIAL_ECHO(value);} #define SERIAL_ECHOPAIR(name,value) {SERIAL_ECHOPGM(name);SERIAL_ECHO(value);}
// Macro for getting current active extruder
#define ACTIVE_EXTRUDER (active_extruder)
//things to write to serial from Programmemory. saves 400 to 2k of RAM. //things to write to serial from Programmemory. saves 400 to 2k of RAM.
#define SerialprintPGM(x) serialprintPGM(MYPGM(x)) #define SerialprintPGM(x) serialprintPGM(MYPGM(x))
@ -100,14 +102,31 @@ void manage_inactivity(byte debug);
#define disable_z() ; #define disable_z() ;
#endif #endif
#if E_ENABLE_PIN > -1 #if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1)
#define enable_e() WRITE(E_ENABLE_PIN, E_ENABLE_ON) #define enable_e0() WRITE(E0_ENABLE_PIN, E_ENABLE_ON)
#define disable_e() WRITE(E_ENABLE_PIN,!E_ENABLE_ON) #define disable_e0() WRITE(E0_ENABLE_PIN,!E_ENABLE_ON)
#else #else
#define enable_e() ; #define enable_e0() /* nothing */
#define disable_e() ; #define disable_e0() /* nothing */
#endif #endif
#if (EXTRUDERS > 1) && defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1)
#define enable_e1() WRITE(E1_ENABLE_PIN, E_ENABLE_ON)
#define disable_e1() WRITE(E1_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e1() /* nothing */
#define disable_e1() /* nothing */
#endif
#if (EXTRUDERS > 2) && defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1)
#define enable_e2() WRITE(E2_ENABLE_PIN, E_ENABLE_ON)
#define disable_e2() WRITE(E2_ENABLE_PIN,!E_ENABLE_ON)
#else
#define enable_e2() /* nothing */
#define disable_e2() /* nothing */
#endif
enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3}; enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3};
@ -131,4 +150,7 @@ extern bool axis_relative_modes[];
extern float current_position[NUM_AXIS] ; extern float current_position[NUM_AXIS] ;
extern float add_homeing[3]; extern float add_homeing[3];
// Handling multiple extruders pins
extern uint8_t active_extruder;
#endif #endif

105
Marlin/Marlin.pde
View file

@ -119,7 +119,6 @@
//=========================================================================== //===========================================================================
//=============================imported variables============================ //=============================imported variables============================
//=========================================================================== //===========================================================================
extern float HeaterPower;
//=========================================================================== //===========================================================================
@ -133,8 +132,10 @@ bool axis_relative_modes[] = AXIS_RELATIVE_MODES;
volatile int feedmultiply=100; //100->1 200->2 volatile int feedmultiply=100; //100->1 200->2
int saved_feedmultiply; int saved_feedmultiply;
volatile bool feedmultiplychanged=false; volatile bool feedmultiplychanged=false;
float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0}; float current_position[NUM_AXIS] = { 0.0, 0.0, 0.0, 0.0 };
float add_homeing[3]={0,0,0}; float add_homeing[3]={0,0,0};
uint8_t active_extruder = 0;
//=========================================================================== //===========================================================================
//=============================private variables============================= //=============================private variables=============================
@ -601,7 +602,6 @@ FORCE_INLINE void process_commands()
else if(code_seen('M')) else if(code_seen('M'))
{ {
switch( (int)code_value() ) switch( (int)code_value() )
{ {
case 17: case 17:
@ -609,10 +609,12 @@ FORCE_INLINE void process_commands()
enable_x(); enable_x();
enable_y(); enable_y();
enable_z(); enable_z();
enable_e(); enable_e0();
enable_e1();
enable_e2();
break; break;
#ifdef SDSUPPORT
#ifdef SDSUPPORT
case 20: // M20 - list SD card case 20: // M20 - list SD card
SERIAL_PROTOCOLLNPGM("Begin file list"); SERIAL_PROTOCOLLNPGM("Begin file list");
card.ls(); card.ls();
@ -641,9 +643,8 @@ FORCE_INLINE void process_commands()
card.pauseSDPrint(); card.pauseSDPrint();
break; break;
case 26: //M26 - Set SD index case 26: //M26 - Set SD index
if(card.cardOK && code_seen('S')){ if(card.cardOK && code_seen('S')) {
card.setIndex(code_value_long()); card.setIndex(code_value_long());
} }
break; break;
case 27: //M27 - Get SD status case 27: //M27 - Get SD status
@ -657,16 +658,15 @@ FORCE_INLINE void process_commands()
*(starpos-1) = '\0'; *(starpos-1) = '\0';
} }
card.openFile(strchr_pointer+4,false); card.openFile(strchr_pointer+4,false);
break; break;
case 29: //M29 - Stop SD write case 29: //M29 - Stop SD write
//processed in write to file routine above //processed in write to file routine above
//card,saving = false; //card,saving = false;
break; break;
#endif //SDSUPPORT #endif //SDSUPPORT
case 30: //M30 take time since the start of the SD print or an M109 command case 30: //M30 take time since the start of the SD print or an M109 command
{ {
stoptime=millis(); stoptime=millis();
char time[30]; char time[30];
unsigned long t=(stoptime-starttime)/1000; unsigned long t=(stoptime-starttime)/1000;
@ -678,8 +678,8 @@ FORCE_INLINE void process_commands()
SERIAL_ECHOLN(time); SERIAL_ECHOLN(time);
LCD_MESSAGE(time); LCD_MESSAGE(time);
autotempShutdown(); autotempShutdown();
} }
break; break;
case 42: //M42 -Change pin status via gcode case 42: //M42 -Change pin status via gcode
if (code_seen('S')) if (code_seen('S'))
{ {
@ -723,7 +723,7 @@ FORCE_INLINE void process_commands()
if (code_seen('S')) setTargetBed(code_value()); if (code_seen('S')) setTargetBed(code_value());
break; break;
case 105 : // M105 case 105 : // M105
tmp_extruder = active_extruder; tmp_extruder = ACTIVE_EXTRUDER;
if(code_seen('T')) { if(code_seen('T')) {
tmp_extruder = code_value(); tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) { if(tmp_extruder >= EXTRUDERS) {
@ -733,21 +733,16 @@ FORCE_INLINE void process_commands()
break; break;
} }
} }
#if (TEMP_0_PIN > -1) || (TEMP_2_PIN > -1) #if (TEMP_0_PIN > -1)
SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOLPGM("ok T:");
SERIAL_PROTOCOL( degHotend(tmp_extruder)); SERIAL_PROTOCOL(degHotend(tmp_extruder));
#if TEMP_1_PIN > -1 #if TEMP_BED_PIN > -1
SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOL(degBed()); SERIAL_PROTOCOL(degBed());
#endif //TEMP_1_PIN #endif //TEMP_BED_PIN
#else #else
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("No thermistors - no temp"); SERIAL_ERRORLNPGM("No thermistors - no temp");
#endif
#ifdef PIDTEMP
SERIAL_PROTOCOLPGM(" @:");
SERIAL_PROTOCOL( HeaterPower);
#endif #endif
SERIAL_PROTOCOLLN(""); SERIAL_PROTOCOLLN("");
return; return;
@ -790,19 +785,31 @@ FORCE_INLINE void process_commands()
residencyStart = -1; residencyStart = -1;
/* continue to loop until we have reached the target temp /* continue to loop until we have reached the target temp
_and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */ _and_ until TEMP_RESIDENCY_TIME hasn't passed since we reached it */
while((target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder))) || while((residencyStart == -1) ||
(residencyStart > -1 && (millis() - residencyStart) < TEMP_RESIDENCY_TIME*1000) ) { (residencyStart > -1 && (millis() - residencyStart) < TEMP_RESIDENCY_TIME*1000) ) {
#else #else
while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) { while ( target_direction ? (isHeatingHotend(tmp_extruder)) : (isCoolingHotend(tmp_extruder)&&(CooldownNoWait==false)) ) {
#endif //TEMP_RESIDENCY_TIME #endif //TEMP_RESIDENCY_TIME
if( (millis() - codenum) > 1000 ) if( (millis() - codenum) > 1000 )
{ //Print Temp Reading every 1 second while heating up/cooling down { //Print Temp Reading and remaining time every 1 second while heating up/cooling down
SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOLLN( degHotend(tmp_extruder) ); SERIAL_PROTOCOLLN( degHotend(tmp_extruder) );
codenum = millis(); SERIAL_PROTOCOLPGM(" E:");
} SERIAL_PROTOCOLLN( (int)tmp_extruder );
manage_heater(); SERIAL_PROTOCOLPGM(" W:");
LCD_STATUS; if(residencyStart > -1)
{
codenum = TEMP_RESIDENCY_TIME - ((millis() - residencyStart) / 1000);
SERIAL_PROTOCOLLN( codenum );
}
else
{
SERIAL_PROTOCOLLN( "?" );
}
codenum = millis();
}
manage_heater();
LCD_STATUS;
#ifdef TEMP_RESIDENCY_TIME #ifdef TEMP_RESIDENCY_TIME
/* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time /* start/restart the TEMP_RESIDENCY_TIME timer whenever we reach target temp for the first time
or when current temp falls outside the hysteresis after target temp was reached */ or when current temp falls outside the hysteresis after target temp was reached */
@ -818,8 +825,8 @@ FORCE_INLINE void process_commands()
starttime=millis(); starttime=millis();
} }
break; break;
case 190: // M190 - Wait bed for heater to reach target. case 190: // M190 - Wait for bed heater to reach target.
#if TEMP_1_PIN > -1 #if TEMP_BED_PIN > -1
LCD_MESSAGEPGM("Bed Heating."); LCD_MESSAGEPGM("Bed Heating.");
if (code_seen('S')) setTargetBed(code_value()); if (code_seen('S')) setTargetBed(code_value());
codenum = millis(); codenum = millis();
@ -827,13 +834,13 @@ FORCE_INLINE void process_commands()
{ {
if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up. if( (millis()-codenum) > 1000 ) //Print Temp Reading every 1 second while heating up.
{ {
float tt=degHotend0(); float tt=degHotend(ACTIVE_EXTRUDER);
SERIAL_PROTOCOLPGM("T:"); SERIAL_PROTOCOLPGM("T:");
SERIAL_PROTOCOLLN(tt ); SERIAL_PROTOCOL(tt);
SERIAL_PROTOCOLPGM("ok T:"); SERIAL_PROTOCOLPGM(" E:");
SERIAL_PROTOCOL(tt ); SERIAL_PROTOCOLLN( (int)tmp_extruder );
SERIAL_PROTOCOLPGM(" B:"); SERIAL_PROTOCOLPGM(" B:");
SERIAL_PROTOCOLLN(degBed() ); SERIAL_PROTOCOLLN(degBed());
codenum = millis(); codenum = millis();
} }
manage_heater(); manage_heater();
@ -886,7 +893,9 @@ FORCE_INLINE void process_commands()
if(code_seen('E')) { if(code_seen('E')) {
st_synchronize(); st_synchronize();
LCD_MESSAGEPGM("Free Move"); LCD_MESSAGEPGM("Free Move");
disable_e(); disable_e0();
disable_e1();
disable_e2();
} }
else { else {
finishAndDisableSteppers(); finishAndDisableSteppers();
@ -1061,7 +1070,9 @@ FORCE_INLINE void process_commands()
} }
} }
else if(code_seen('T')) {
else if(code_seen('T'))
{
tmp_extruder = code_value(); tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) { if(tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -1071,8 +1082,12 @@ FORCE_INLINE void process_commands()
} }
else { else {
active_extruder = tmp_extruder; active_extruder = tmp_extruder;
SERIAL_ECHO_START;
SERIAL_ECHO("Active Extruder: ");
SERIAL_PROTOCOLLN((int)active_extruder);
} }
} }
else else
{ {
SERIAL_ECHO_START; SERIAL_ECHO_START;
@ -1167,7 +1182,9 @@ void manage_inactivity(byte debug)
disable_x(); disable_x();
disable_y(); disable_y();
disable_z(); disable_z();
disable_e(); disable_e0();
disable_e1();
disable_e2();
} }
check_axes_activity(); check_axes_activity();
} }
@ -1179,7 +1196,9 @@ void kill()
disable_x(); disable_x();
disable_y(); disable_y();
disable_z(); disable_z();
disable_e(); disable_e0();
disable_e1();
disable_e2();
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT); if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
SERIAL_ERROR_START; SERIAL_ERROR_START;

16
Marlin/fastio.h
View file

@ -44,9 +44,23 @@
// why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html // why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
/// Read a pin wrapper /// Read a pin wrapper
#define READ(IO) _READ(IO) #define READ(IO) _READ(IO)
/// Write to a pin wrapper /// Write to a pin wrapper
#define WRITE(IO, v) _WRITE(IO, v) #define WRITE(IO, v) _WRITE(IO, v)
#if EXTRUDERS > 2
#define WRITE_E_STEP(v) { if(ACTIVE_EXTRUDER == 2) { WRITE(E2_STEP_PIN, v); } else { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}}
#define NORM_E_DIR() { if(ACTIVE_EXTRUDER == 2) { WRITE(E2_DIR_PIN, INVERT_E2_DIR); } else { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}}
#define REV_E_DIR() { if(ACTIVE_EXTRUDER == 2) { WRITE(E2_DIR_PIN, !INVERT_E2_DIR); } else { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}}
#elif EXTRUDERS > 1
#define WRITE_E_STEP(v) { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_STEP_PIN, v); } else { WRITE(E0_STEP_PIN, v); }}
#define NORM_E_DIR() { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, INVERT_E0_DIR); }}
#define REV_E_DIR() { if(ACTIVE_EXTRUDER == 1) { WRITE(E1_DIR_PIN, !INVERT_E1_DIR); } else { WRITE(E0_DIR_PIN, !INVERT_E0_DIR); }}
#else
#define WRITE_E_STEP(v) WRITE(E0_STEP_PIN, v)
#define NORM_E_DIR() WRITE(E0_DIR_PIN, INVERT_E0_DIR)
#define REV_E_DIR() WRITE(E0_DIR_PIN, !INVERT_E0_DIR)
#endif
/// toggle a pin wrapper /// toggle a pin wrapper
#define TOGGLE(IO) _TOGGLE(IO) #define TOGGLE(IO) _TOGGLE(IO)

179
Marlin/pins.h
View file

@ -47,9 +47,9 @@
#define Z_MIN_PIN 17 #define Z_MIN_PIN 17
#define Z_MAX_PIN 16 #define Z_MAX_PIN 16
#define E_STEP_PIN 11 #define E0_STEP_PIN 11
#define E_DIR_PIN 12 #define E0_DIR_PIN 12
#define E_ENABLE_PIN -1 #define E0_ENABLE_PIN -1
#define SDPOWER -1 #define SDPOWER -1
#define SDSS -1 #define SDSS -1
@ -59,9 +59,13 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 6 #define HEATER_0_PIN 6
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#endif #endif
@ -120,9 +124,9 @@
#define Z_MIN_PIN 2 #define Z_MIN_PIN 2
#define Z_MAX_PIN 1 #define Z_MAX_PIN 1
#define E_STEP_PIN 12 #define E0_STEP_PIN 12
#define E_DIR_PIN 16 #define E0_DIR_PIN 16
#define E_ENABLE_PIN 3 #define E0_ENABLE_PIN 3
#define SDPOWER -1 #define SDPOWER -1
#define SDSS -1 #define SDSS -1
@ -132,9 +136,13 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 14 #define HEATER_0_PIN 14
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 4 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_1_PIN -1 #define TEMP_1_PIN -1
#define HEATER_2_PIN -1 #define TEMP_2_PIN -1
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */ /* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
@ -171,9 +179,9 @@
#define Z_MIN_PIN 30 #define Z_MIN_PIN 30
#define Z_MAX_PIN 31 #define Z_MAX_PIN 31
#define E_STEP_PIN 17 #define E0_STEP_PIN 17
#define E_DIR_PIN 16 #define E0_DIR_PIN 16
#define E_ENABLE_PIN -1 #define E0_ENABLE_PIN -1
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 4 #define SDSS 4
@ -194,11 +202,13 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN -1 #define HEATER_0_PIN -1
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_1_PIN -1 #define TEMP_1_PIN -1
#define HEATER_2_PIN -1 #define TEMP_2_PIN -1
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#endif #endif
@ -230,37 +240,43 @@
#define X_DIR_PIN 55 #define X_DIR_PIN 55
#define X_ENABLE_PIN 38 #define X_ENABLE_PIN 38
#define X_MIN_PIN 3 #define X_MIN_PIN 3
#define X_MAX_PIN -1 //2 //Max endstops default to disabled "-1", set to commented value to enable. #define X_MAX_PIN 2 //2 //Max endstops default to disabled "-1", set to commented value to enable.
#define Y_STEP_PIN 60 #define Y_STEP_PIN 60
#define Y_DIR_PIN 61 #define Y_DIR_PIN 61
#define Y_ENABLE_PIN 56 #define Y_ENABLE_PIN 56
#define Y_MIN_PIN 14 #define Y_MIN_PIN 14
#define Y_MAX_PIN -1 //15 #define Y_MAX_PIN 15 //15
#define Z_STEP_PIN 46 #define Z_STEP_PIN 46
#define Z_DIR_PIN 48 #define Z_DIR_PIN 48
#define Z_ENABLE_PIN 62 #define Z_ENABLE_PIN 62
#define Z_MIN_PIN 18 #define Z_MIN_PIN 18
#define Z_MAX_PIN -1 //19 #define Z_MAX_PIN 19 //19
#define E_STEP_PIN 26 #define E0_STEP_PIN 26
#define E_DIR_PIN 28 #define E0_DIR_PIN 28
#define E_ENABLE_PIN 24 #define E0_ENABLE_PIN 24
#define E1_STEP_PIN 36
#define E1_DIR_PIN 34
#define E1_ENABLE_PIN 30
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 53 #define SDSS 53
#define LED_PIN 13 #define LED_PIN 13
#define FAN_PIN 9 #define FAN_PIN 4
#define PS_ON_PIN 12 #define PS_ON_PIN 12
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 10 #define HEATER_0_PIN 10 // EXTRUDER 1
#define HEATER_1_PIN 8 #define HEATER_1_PIN 9 // EXTRUDER 2
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1 // EXTRUDER 2
#define TEMP_0_PIN 13 // ANALOG NUMBERING #define TEMP_0_PIN 13 // ANALOG NUMBERING
#define TEMP_1_PIN 14 // ANALOG NUMBERING #define TEMP_1_PIN 15 // ANALOG NUMBERING
#define TEMP_2_PIN -1 // ANALOG NUMBERING #define TEMP_2_PIN -1 // ANALOG NUMBERING
#define HEATER_BED_PIN 8 // BED
#define TEMP_BED_PIN 14 // ANALOG NUMBERING
#else // RAMPS_V_1_1 or RAMPS_V_1_2 as default #else // RAMPS_V_1_1 or RAMPS_V_1_2 as default
@ -283,9 +299,9 @@
#define Z_MIN_PIN 18 #define Z_MIN_PIN 18
#define Z_MAX_PIN -1 //19 #define Z_MAX_PIN -1 //19
#define E_STEP_PIN 32 #define E0_STEP_PIN 32
#define E_DIR_PIN 34 #define E0_DIR_PIN 34
#define E_ENABLE_PIN 30 #define E0_ENABLE_PIN 30
#define SDPOWER 48 #define SDPOWER 48
#define SDSS 53 #define SDSS 53
@ -297,18 +313,19 @@
#ifdef RAMPS_V_1_0 // RAMPS_V_1_0 #ifdef RAMPS_V_1_0 // RAMPS_V_1_0
#define HEATER_0_PIN 12 // RAMPS 1.0 #define HEATER_0_PIN 12 // RAMPS 1.0
#define HEATER_1_PIN -1 // RAMPS 1.0 #define HEATER_BED_PIN -1 // RAMPS 1.0
#define FAN_PIN 11 // RAMPS 1.0 #define FAN_PIN 11 // RAMPS 1.0
#else // RAMPS_V_1_1 or RAMPS_V_1_2 #else // RAMPS_V_1_1 or RAMPS_V_1_2
#define HEATER_0_PIN 10 // RAMPS 1.1 #define HEATER_0_PIN 10 // RAMPS 1.1
#define HEATER_1_PIN 8 // RAMPS 1.1 #define HEATER_BED_PIN 8 // RAMPS 1.1
#define FAN_PIN 9 // RAMPS 1.1 #define FAN_PIN 9 // RAMPS 1.1
#endif #endif
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_0_PIN 2 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! #define TEMP_2_PIN -1
#define TEMP_BED_PIN 1 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#endif #endif
// SPI for Max6675 Thermocouple // SPI for Max6675 Thermocouple
@ -353,9 +370,9 @@
#define Z_MIN_PIN 4 #define Z_MIN_PIN 4
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define E_STEP_PIN 11 #define E0_STEP_PIN 11
#define E_DIR_PIN 12 #define E0_DIR_PIN 12
#define E_ENABLE_PIN -1 #define E0_ENABLE_PIN -1
#define SDPOWER -1 #define SDPOWER -1
#define SDSS -1 #define SDSS -1
@ -365,9 +382,13 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 6 #define HEATER_0_PIN 6
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define HEATER_1_PIN -1 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define TEMP_0_PIN 0 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
#define TEMP_1_PIN -1
#define TEMP_2_PIN -1
#define HEATER_BED_PIN -1
#define TEMP_BED_PIN -1
#endif #endif
@ -404,19 +425,21 @@
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
//extruder pins //extruder pins
#define E_STEP_PIN 4 //Edited @ EJE Electronics 20100715 #define E0_STEP_PIN 4 //Edited @ EJE Electronics 20100715
#define E_DIR_PIN 2 //Edited @ EJE Electronics 20100715 #define E0_DIR_PIN 2 //Edited @ EJE Electronics 20100715
#define E_ENABLE_PIN 3 //Added @ EJE Electronics 20100715 #define E0_ENABLE_PIN 3 //Added @ EJE Electronics 20100715
#define TEMP_0_PIN 5 //changed @ rkoeppl 20110410 #define TEMP_0_PIN 5 //changed @ rkoeppl 20110410
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_2_PIN -1 //changed @ rkoeppl 20110410
#define HEATER_0_PIN 14 //changed @ rkoeppl 20110410 #define HEATER_0_PIN 14 //changed @ rkoeppl 20110410
#define HEATER_1_PIN -1 //changed @ rkoeppl 20110410 #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_BED_PIN -1 //changed @ rkoeppl 20110410
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 17 #define SDSS 17
#define LED_PIN -1 //changed @ rkoeppl 20110410 #define LED_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_1_PIN -1 //changed @ rkoeppl 20110410
#define TEMP_2_PIN -1
#define FAN_PIN -1 //changed @ rkoeppl 20110410 #define FAN_PIN -1 //changed @ rkoeppl 20110410
#define PS_ON_PIN -1 //changed @ rkoeppl 20110410 #define PS_ON_PIN -1 //changed @ rkoeppl 20110410
//our pin for debugging. //our pin for debugging.
@ -459,8 +482,8 @@
#define Z_MIN_PIN 20 #define Z_MIN_PIN 20
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define E_STEP_PIN 1 #define E0_STEP_PIN 1
#define E_DIR_PIN 0 #define E0_DIR_PIN 0
#define LED_PIN -1 #define LED_PIN -1
@ -470,31 +493,33 @@
#define KILL_PIN -1 #define KILL_PIN -1
#define HEATER_0_PIN 13 // (extruder) #define HEATER_0_PIN 13 // (extruder)
#define HEATER_1_PIN -1
#define HEATER_2_PIN -1
#ifdef SANGUINOLOLU_V_1_2 #ifdef SANGUINOLOLU_V_1_2
#define HEATER_1_PIN 12 // (bed) #define HEATER_BED_PIN 12 // (bed)
#define X_ENABLE_PIN 14 #define X_ENABLE_PIN 14
#define Y_ENABLE_PIN 14 #define Y_ENABLE_PIN 14
#define Z_ENABLE_PIN 26 #define Z_ENABLE_PIN 26
#define E_ENABLE_PIN 14 #define E0_ENABLE_PIN 14
#else #else
#define HEATER_1_PIN 14 // (bed) #define HEATER_BED_PIN 14 // (bed)
#define X_ENABLE_PIN -1 #define X_ENABLE_PIN -1
#define Y_ENABLE_PIN -1 #define Y_ENABLE_PIN -1
#define Z_ENABLE_PIN -1 #define Z_ENABLE_PIN -1
#define E_ENABLE_PIN -1 #define E0_ENABLE_PIN -1
#endif #endif
#define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder) #define TEMP_0_PIN 7 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 33 extruder)
#define TEMP_1_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed) #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!! (pin 34 bed)
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 31 #define SDSS 31
#define HEATER_2_PIN -1
#endif #endif
@ -529,8 +554,8 @@
#define Z_MAX_PIN 32 #define Z_MAX_PIN 32
#define Z_ENABLE_PIN 35 #define Z_ENABLE_PIN 35
#define HEATER_1_PIN 4 #define HEATER_BED_PIN 4
#define TEMP_1_PIN 11 #define TEMP_BED_PIN 11
#define EXTRUDER_0_STEP_PIN 43 #define EXTRUDER_0_STEP_PIN 43
#define EXTRUDER_0_DIR_PIN 45 #define EXTRUDER_0_DIR_PIN 45
@ -543,14 +568,14 @@
#define EXTRUDER_1_ENABLE_PIN 51 #define EXTRUDER_1_ENABLE_PIN 51
#define EXTRUDER_1_HEATER_PIN 3 #define EXTRUDER_1_HEATER_PIN 3
#define EXTRUDER_1_TEMPERATURE_PIN 10 #define EXTRUDER_1_TEMPERATURE_PIN 10
#define HEATER_2_PIN 51 #define HEATER_1_PIN 51
#define TEMP_2_PIN 3 #define TEMP_1_PIN 3
#define E_STEP_PIN EXTRUDER_0_STEP_PIN #define E0_STEP_PIN EXTRUDER_0_STEP_PIN
#define E_DIR_PIN EXTRUDER_0_DIR_PIN #define E0_DIR_PIN EXTRUDER_0_DIR_PIN
#define E_ENABLE_PIN EXTRUDER_0_ENABLE_PIN #define E0_ENABLE_PIN EXTRUDER_0_ENABLE_PIN
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 53 #define SDSS 53
@ -655,20 +680,22 @@
#define Z_MIN_PIN 15 #define Z_MIN_PIN 15
#define Z_MAX_PIN -1 #define Z_MAX_PIN -1
#define E_STEP_PIN 6 #define E0_STEP_PIN 6
#define E_DIR_PIN 7 #define E0_DIR_PIN 7
#define E_ENABLE_PIN 19 #define E0_ENABLE_PIN 19
#define HEATER_0_PIN 21 // Extruder #define HEATER_0_PIN 21 // Extruder
#define HEATER_1_PIN 20 // Bed #define HEATER_1_PIN -1
#define HEATER_2_PIN -1 #define HEATER_2_PIN -1
#define HEATER_BED_PIN 20 // Bed
#define FAN_PIN 22 // Fan #define FAN_PIN 22 // Fan
#define TEMP_0_PIN 7 // Extruder #define TEMP_0_PIN 7 // Extruder
#define TEMP_1_PIN 6 // Bed #define TEMP_1_PIN -1
#define TEMP_2_PIN -1 #define TEMP_2_PIN -1
#define TEMP_BED_PIN 6 // Bed
#define SDPOWER -1 #define SDPOWER -1
#define SDSS 8 #define SDSS 8
@ -690,6 +717,22 @@
#endif #endif
//List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those! //List of pins which to ignore when asked to change by gcode, 0 and 1 are RX and TX, do not mess with those!
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, E_STEP_PIN, E_DIR_PIN, E_ENABLE_PIN, LED_PIN, PS_ON_PIN, HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, FAN_PIN, TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN} #define _E0_PINS E0_STEP_PIN, E0_DIR_PIN, E0_ENABLE_PIN
#if EXTRUDERS == 3
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN
#define _E2_PINS E2_STEP_PIN, E2_DIR_PIN, E2_ENABLE_PIN
#elif EXTRUDERS == 2
#define _E1_PINS E1_STEP_PIN, E1_DIR_PIN, E1_ENABLE_PIN
#define _E2_PINS -1
#elif EXTRUDERS == 1
#define _E1_PINS -1
#define _E2_PINS -1
#else
#error Unsupported number of extruders
#endif
#define SENSITIVE_PINS {0, 1, X_STEP_PIN, X_DIR_PIN, X_ENABLE_PIN, X_MIN_PIN, X_MAX_PIN, Y_STEP_PIN, Y_DIR_PIN, Y_ENABLE_PIN, Y_MIN_PIN, Y_MAX_PIN, Z_STEP_PIN, Z_DIR_PIN, Z_ENABLE_PIN, Z_MIN_PIN, Z_MAX_PIN, LED_PIN, PS_ON_PIN, \
HEATER_0_PIN, HEATER_1_PIN, HEATER_2_PIN, \
HEATER_BED_PIN, FAN_PIN, \
_E0_PINS, _E1_PINS, _E2_PINS, \
TEMP_0_PIN, TEMP_1_PIN, TEMP_2_PIN, TEMP_BED_PIN }
#endif #endif

18
Marlin/planner.cpp
View file

@ -56,9 +56,9 @@
//#include <math.h> //#include <math.h>
//#include <stdlib.h> //#include <stdlib.h>
#include "Marlin.h"
#include "Configuration.h" #include "Configuration.h"
#include "pins.h" #include "pins.h"
#include "Marlin.h"
#include "fastio.h" #include "fastio.h"
#include "planner.h" #include "planner.h"
#include "stepper.h" #include "stepper.h"
@ -81,8 +81,6 @@ float max_z_jerk;
float mintravelfeedrate; float mintravelfeedrate;
unsigned long axis_steps_per_sqr_second[NUM_AXIS]; unsigned long axis_steps_per_sqr_second[NUM_AXIS];
uint8_t active_extruder = 0;
// The current position of the tool in absolute steps // The current position of the tool in absolute steps
long position[4]; //rescaled from extern when axis_steps_per_unit are changed by gcode long position[4]; //rescaled from extern when axis_steps_per_unit are changed by gcode
static float previous_speed[4]; // Speed of previous path line segment static float previous_speed[4]; // Speed of previous path line segment
@ -95,7 +93,6 @@ static float previous_nominal_speed; // Nominal speed of previous path line segm
bool autotemp_enabled=false; bool autotemp_enabled=false;
#endif #endif
//=========================================================================== //===========================================================================
//=================semi-private variables, used in inline functions ===== //=================semi-private variables, used in inline functions =====
//=========================================================================== //===========================================================================
@ -437,7 +434,7 @@ void check_axes_activity() {
if((DISABLE_X) && (x_active == 0)) disable_x(); if((DISABLE_X) && (x_active == 0)) disable_x();
if((DISABLE_Y) && (y_active == 0)) disable_y(); if((DISABLE_Y) && (y_active == 0)) disable_y();
if((DISABLE_Z) && (z_active == 0)) disable_z(); if((DISABLE_Z) && (z_active == 0)) disable_z();
if((DISABLE_E) && (e_active == 0)) disable_e(); if((DISABLE_E) && (e_active == 0)) { disable_e0();disable_e1();disable_e2(); }
} }
@ -496,14 +493,9 @@ void plan_buffer_line(const float &x, const float &y, const float &z, const floa
if(block->steps_x != 0) enable_x(); if(block->steps_x != 0) enable_x();
if(block->steps_y != 0) enable_y(); if(block->steps_y != 0) enable_y();
if(block->steps_z != 0) enable_z(); if(block->steps_z != 0) enable_z();
if(extruder == 0) {
if(block->steps_e != 0) enable_e(); // Enable all
} if(block->steps_e != 0) { enable_e0();enable_e1();enable_e2(); }
#if (EXTRUDERS > 1)
if(extruder == 1) {
if(block->steps_e != 0) enable_e1();
}
#endif
float delta_mm[4]; float delta_mm[4];
delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS]; delta_mm[X_AXIS] = (target[X_AXIS]-position[X_AXIS])/axis_steps_per_unit[X_AXIS];

2
Marlin/planner.h
View file

@ -91,8 +91,6 @@ extern float max_z_jerk;
extern float mintravelfeedrate; extern float mintravelfeedrate;
extern unsigned long axis_steps_per_sqr_second[NUM_AXIS]; extern unsigned long axis_steps_per_sqr_second[NUM_AXIS];
extern uint8_t active_extruder;
#ifdef AUTOTEMP #ifdef AUTOTEMP
extern bool autotemp_enabled; extern bool autotemp_enabled;
extern float autotemp_max; extern float autotemp_max;

61
Marlin/stepper.cpp
View file

@ -24,9 +24,9 @@
#include "stepper.h" #include "stepper.h"
#include "Configuration.h" #include "Configuration.h"
#include "pins.h"
#include "Marlin.h" #include "Marlin.h"
#include "planner.h" #include "planner.h"
#include "pins.h"
#include "fastio.h" #include "fastio.h"
#include "temperature.h" #include "temperature.h"
#include "ultralcd.h" #include "ultralcd.h"
@ -41,7 +41,6 @@
block_t *current_block; // A pointer to the block currently being traced block_t *current_block; // A pointer to the block currently being traced
//=========================================================================== //===========================================================================
//=============================private variables ============================ //=============================private variables ============================
//=========================================================================== //===========================================================================
@ -419,11 +418,11 @@ ISR(TIMER1_COMPA_vect)
#ifndef ADVANCE #ifndef ADVANCE
if ((out_bits & (1<<E_AXIS)) != 0) { // -direction if ((out_bits & (1<<E_AXIS)) != 0) { // -direction
WRITE(E_DIR_PIN,INVERT_E_DIR); NORM_E_DIR();
count_direction[E_AXIS]=-1; count_direction[E_AXIS]=-1;
} }
else { // +direction else { // +direction
WRITE(E_DIR_PIN,!INVERT_E_DIR); REV_E_DIR();
count_direction[E_AXIS]=-1; count_direction[E_AXIS]=-1;
} }
#endif //!ADVANCE #endif //!ADVANCE
@ -473,9 +472,9 @@ ISR(TIMER1_COMPA_vect)
#ifndef ADVANCE #ifndef ADVANCE
counter_e += current_block->steps_e; counter_e += current_block->steps_e;
if (counter_e > 0) { if (counter_e > 0) {
WRITE(E_STEP_PIN, HIGH); WRITE_E_STEP(HIGH);
counter_e -= current_block->step_event_count; counter_e -= current_block->step_event_count;
WRITE(E_STEP_PIN, LOW); WRITE_E_STEP(LOW);
count_position[E_AXIS]+=count_direction[E_AXIS]; count_position[E_AXIS]+=count_direction[E_AXIS];
} }
#endif //!ADVANCE #endif //!ADVANCE
@ -559,18 +558,18 @@ ISR(TIMER1_COMPA_vect)
OCR0A = old_OCR0A; OCR0A = old_OCR0A;
// Set E direction (Depends on E direction + advance) // Set E direction (Depends on E direction + advance)
for(unsigned char i=0; i<4;) { for(unsigned char i=0; i<4;) {
WRITE(E_STEP_PIN, LOW); WRITE_E_STEP(LOW);
if (e_steps == 0) break; if (e_steps == 0) break;
i++; i++;
if (e_steps < 0) { if (e_steps < 0) {
WRITE(E_DIR_PIN,INVERT_E_DIR); WRITE_E_DIR(INVERT_E_DIR);
e_steps++; e_steps++;
WRITE(E_STEP_PIN, HIGH); WRITE_E_STEP(HIGH);
} }
else if (e_steps > 0) { else if (e_steps > 0) {
WRITE(E_DIR_PIN,!INVERT_E_DIR); WRITE_E_DIR(!INVERT_E_DIR);
e_steps--; e_steps--;
WRITE(E_STEP_PIN, HIGH); WRITE_E_STEP(HIGH);
} }
} }
} }
@ -578,7 +577,7 @@ ISR(TIMER1_COMPA_vect)
void st_init() void st_init()
{ {
//Initialize Dir Pins //Initialize Dir Pins
#if X_DIR_PIN > -1 #if X_DIR_PIN > -1
SET_OUTPUT(X_DIR_PIN); SET_OUTPUT(X_DIR_PIN);
#endif #endif
@ -588,8 +587,14 @@ void st_init()
#if Z_DIR_PIN > -1 #if Z_DIR_PIN > -1
SET_OUTPUT(Z_DIR_PIN); SET_OUTPUT(Z_DIR_PIN);
#endif #endif
#if E_DIR_PIN > -1 #if E0_DIR_PIN > -1
SET_OUTPUT(E_DIR_PIN); SET_OUTPUT(E0_DIR_PIN);
#endif
#if defined(E1_DIR_PIN) && (E1_DIR_PIN > -1)
SET_OUTPUT(E1_DIR_PIN);
#endif
#if defined(E2_DIR_PIN) && (E2_DIR_PIN > -1)
SET_OUTPUT(E2_DIR_PIN);
#endif #endif
//Initialize Enable Pins - steppers default to disabled. //Initialize Enable Pins - steppers default to disabled.
@ -606,9 +611,17 @@ void st_init()
SET_OUTPUT(Z_ENABLE_PIN); SET_OUTPUT(Z_ENABLE_PIN);
if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH); if(!Z_ENABLE_ON) WRITE(Z_ENABLE_PIN,HIGH);
#endif #endif
#if (E_ENABLE_PIN > -1) #if (E0_ENABLE_PIN > -1)
SET_OUTPUT(E_ENABLE_PIN); SET_OUTPUT(E0_ENABLE_PIN);
if(!E_ENABLE_ON) WRITE(E_ENABLE_PIN,HIGH); if(!E_ENABLE_ON) WRITE(E0_ENABLE_PIN,HIGH);
#endif
#if defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1)
SET_OUTPUT(E1_ENABLE_PIN);
if(!E_ENABLE_ON) WRITE(E1_ENABLE_PIN,HIGH);
#endif
#if defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1)
SET_OUTPUT(E2_ENABLE_PIN);
if(!E_ENABLE_ON) WRITE(E2_ENABLE_PIN,HIGH);
#endif #endif
//endstops and pullups //endstops and pullups
@ -669,8 +682,14 @@ void st_init()
#if (Z_STEP_PIN > -1) #if (Z_STEP_PIN > -1)
SET_OUTPUT(Z_STEP_PIN); SET_OUTPUT(Z_STEP_PIN);
#endif #endif
#if (E_STEP_PIN > -1) #if (E0_STEP_PIN > -1)
SET_OUTPUT(E_STEP_PIN); SET_OUTPUT(E0_STEP_PIN);
#endif
#if defined(E1_STEP_PIN) && (E1_STEP_PIN > -1)
SET_OUTPUT(E1_STEP_PIN);
#endif
#if defined(E2_STEP_PIN) && (E2_STEP_PIN > -1)
SET_OUTPUT(E2_STEP_PIN);
#endif #endif
// waveform generation = 0100 = CTC // waveform generation = 0100 = CTC
@ -749,5 +768,7 @@ void finishAndDisableSteppers()
disable_x(); disable_x();
disable_y(); disable_y();
disable_z(); disable_z();
disable_e(); disable_e0();
disable_e1();
disable_e2();
} }

492
Marlin/temperature.cpp
View file

@ -41,17 +41,14 @@
//=========================================================================== //===========================================================================
//=============================public variables============================ //=============================public variables============================
//=========================================================================== //===========================================================================
int target_raw[3] = {0, 0, 0}; int target_raw[EXTRUDERS] = { 0 };
int current_raw[3] = {0, 0, 0}; int target_raw_bed = 0;
int heatingtarget_raw[3]= {0, 0, 0}; int current_raw[EXTRUDERS] = { 0 };
int current_raw_bed = 0;
#ifdef PIDTEMP #ifdef PIDTEMP
// used external
// probably used external float pid_setpoint[EXTRUDERS] = { 0.0 };
float HeaterPower;
float pid_setpoint = 0.0;
float Kp=DEFAULT_Kp; float Kp=DEFAULT_Kp;
float Ki=DEFAULT_Ki; float Ki=DEFAULT_Ki;
@ -72,42 +69,74 @@ static unsigned long previous_millis_bed_heater;
#ifdef PIDTEMP #ifdef PIDTEMP
//static cannot be external: //static cannot be external:
static float temp_iState = 0; static float temp_iState[EXTRUDERS] = { 0 };
static float temp_dState = 0; static float temp_dState[EXTRUDERS] = { 0 };
static float pTerm; static float pTerm[EXTRUDERS];
static float iTerm; static float iTerm[EXTRUDERS];
static float dTerm; static float dTerm[EXTRUDERS];
//int output; //int output;
static float pid_error; static float pid_error[EXTRUDERS];
static float temp_iState_min; static float temp_iState_min[EXTRUDERS];
static float temp_iState_max; static float temp_iState_max[EXTRUDERS];
// static float pid_input; // static float pid_input[EXTRUDERS];
// static float pid_output; // static float pid_output[EXTRUDERS];
static bool pid_reset; static bool pid_reset[EXTRUDERS];
#endif //PIDTEMP #endif //PIDTEMP
#ifdef WATCHPERIOD #ifdef WATCHPERIOD
static int watch_raw[3] = {-1000,-1000,-1000}; static int watch_raw[EXTRUDERS] = { -1000 }; // the first value used for all
static unsigned long watchmillis = 0; static unsigned long watchmillis = 0;
#endif //WATCHPERIOD #endif //WATCHPERIOD
// Init min and max temp with extreme values to prevent false errors during startup // Init min and max temp with extreme values to prevent false errors during startup
static int minttemp_0 = 0; static int minttemp[EXTRUDERS] = { 0 };
static int maxttemp_0 = 16383; static int maxttemp[EXTRUDERS] = { 16383 }; // the first value used for all
//static int minttemp_1 = 0;
//static int maxttemp_1 = 16383;
static int bed_minttemp = 0; static int bed_minttemp = 0;
static int bed_maxttemp = 16383; static int bed_maxttemp = 16383;
static int heater_pin_map[EXTRUDERS] = { HEATER_0_PIN
#if EXTRUDERS > 1
, HEATER_1_PIN
#endif
#if EXTRUDERS > 2
, HEATER_2_PIN
#endif
#if EXTRUDERS > 3
#error Unsupported number of extruders
#endif
};
static void *heater_ttbl_map[EXTRUDERS] = { (void *)heater_0_temptable
#if EXTRUDERS > 1
, (void *)heater_1_temptable
#endif
#if EXTRUDERS > 2
, (void *)heater_2_temptable
#endif
#if EXTRUDERS > 3
#error Unsupported number of extruders
#endif
};
static int heater_ttbllen_map[EXTRUDERS] = { heater_0_temptable_len
#if EXTRUDERS > 1
, heater_1_temptable_len
#endif
#if EXTRUDERS > 2
, heater_2_temptable_len
#endif
#if EXTRUDERS > 3
#error Unsupported number of extruders
#endif
};
//=========================================================================== //===========================================================================
//=============================functions ============================ //============================= functions ============================
//=========================================================================== //===========================================================================
void updatePID() void updatePID()
{ {
#ifdef PIDTEMP #ifdef PIDTEMP
temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki; for(int e = 0; e < EXTRUDERS; e++) {
temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / Ki;
}
#endif #endif
} }
@ -119,92 +148,85 @@ void manage_heater()
float pid_input; float pid_input;
float pid_output; float pid_output;
if(temp_meas_ready != true) //better readability if(temp_meas_ready != true) //better readability
return; return;
CRITICAL_SECTION_START; CRITICAL_SECTION_START;
temp_meas_ready = false; temp_meas_ready = false;
CRITICAL_SECTION_END; CRITICAL_SECTION_END;
for(int e = 0; e < EXTRUDERS; e++)
{
#ifdef PIDTEMP #ifdef PIDTEMP
pid_input = analog2temp(current_raw[TEMPSENSOR_HOTEND_0]); pid_input = analog2temp(current_raw[e], e);
#ifndef PID_OPENLOOP #ifndef PID_OPENLOOP
pid_error = pid_setpoint - pid_input; pid_error[e] = pid_setpoint[e] - pid_input;
if(pid_error > 10){ if(pid_error[e] > 10) {
pid_output = PID_MAX; pid_output = PID_MAX;
pid_reset = true; pid_reset[e] = true;
} }
else if(pid_error < -10) { else if(pid_error[e] < -10) {
pid_output = 0; pid_output = 0;
pid_reset = true; pid_reset[e] = true;
} }
else { else {
if(pid_reset == true) { if(pid_reset[e] == true) {
temp_iState = 0.0; temp_iState[e] = 0.0;
pid_reset = false; pid_reset[e] = false;
} }
pTerm = Kp * pid_error; pTerm[e] = Kp * pid_error[e];
temp_iState += pid_error; temp_iState[e] += pid_error[e];
temp_iState = constrain(temp_iState, temp_iState_min, temp_iState_max); temp_iState[e] = constrain(temp_iState[e], temp_iState_min[e], temp_iState_max[e]);
iTerm = Ki * temp_iState; iTerm[e] = Ki * temp_iState[e];
//K1 defined in Configuration.h in the PID settings //K1 defined in Configuration.h in the PID settings
#define K2 (1.0-K1) #define K2 (1.0-K1)
dTerm = (Kd * (pid_input - temp_dState))*K2 + (K1 * dTerm); dTerm[e] = (Kd * (pid_input - temp_dState[e]))*K2 + (K1 * dTerm[e]);
temp_dState = pid_input; temp_dState[e] = pid_input;
// #ifdef PID_ADD_EXTRUSION_RATE pid_output = constrain(pTerm[e] + iTerm[e] - dTerm[e], 0, PID_MAX);
// pTerm+=Kc*current_block->speed_e; //additional heating if extrusion speed is high
// #endif
pid_output = constrain(pTerm + iTerm - dTerm, 0, PID_MAX);
} }
#endif //PID_OPENLOOP #endif //PID_OPENLOOP
#ifdef PID_DEBUG #ifdef PID_DEBUG
//SERIAL_ECHOLN(" PIDDEBUG Input "<<pid_input<<" Output "<<pid_output" pTerm "<<pTerm<<" iTerm "<<iTerm<<" dTerm "<<dTerm); SERIAL_ECHOLN(" PIDDEBUG "<<e<<": Input "<<pid_input<<" Output "<<pid_output" pTerm "<<pTerm[e]<<" iTerm "<<iTerm[e]<<" dTerm "<<dTerm[e]);
#endif //PID_DEBUG #endif //PID_DEBUG
HeaterPower=pid_output; #else /* PID off */
// Check if temperature is within the correct range pid_output = 0;
if((current_raw[TEMPSENSOR_HOTEND_0] > minttemp_0) && (current_raw[TEMPSENSOR_HOTEND_0] < maxttemp_0)) { if(current_raw[e] < target_raw[e]) {
analogWrite(HEATER_0_PIN, pid_output); pid_output = PID_MAX;
}
else {
analogWrite(HEATER_0_PIN, 0);
}
#endif //PIDTEMP
#ifndef PIDTEMP
// Check if temperature is within the correct range
if((current_raw[TEMPSENSOR_HOTEND_0] > minttemp_0) && (current_raw[TEMPSENSOR_HOTEND_0] < maxttemp_0)) {
if(current_raw[TEMPSENSOR_HOTEND_0] >= target_raw[TEMPSENSOR_HOTEND_0]) {
WRITE(HEATER_0_PIN,LOW);
}
else {
WRITE(HEATER_0_PIN,HIGH);
}
}
else {
WRITE(HEATER_0_PIN,LOW);
} }
#endif #endif
// Check if temperature is within the correct range
if((current_raw[e] > minttemp[e]) && (current_raw[e] < maxttemp[e]))
{
analogWrite(heater_pin_map[e], pid_output);
}
else {
analogWrite(heater_pin_map[e], 0);
}
} // End extruder for loop
if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL) if(millis() - previous_millis_bed_heater < BED_CHECK_INTERVAL)
return; return;
previous_millis_bed_heater = millis(); previous_millis_bed_heater = millis();
#if TEMP_1_PIN > -1 #if TEMP_BED_PIN > -1
// Check if temperature is within the correct range // Check if temperature is within the correct range
if((current_raw[TEMPSENSOR_BED] > bed_minttemp) && (current_raw[TEMPSENSOR_BED] < bed_maxttemp)) { if((current_raw_bed > bed_minttemp) && (current_raw_bed < bed_maxttemp)) {
if(current_raw[TEMPSENSOR_BED] >= target_raw[TEMPSENSOR_BED]) if(current_raw_bed >= target_raw_bed)
{ {
WRITE(HEATER_1_PIN,LOW); WRITE(HEATER_BED_PIN,LOW);
} }
else else
{ {
WRITE(HEATER_1_PIN,HIGH); WRITE(HEATER_BED_PIN,HIGH);
} }
} }
else { else {
WRITE(HEATER_1_PIN,LOW); WRITE(HEATER_BED_PIN,LOW);
} }
#endif #endif
} }
@ -214,30 +236,38 @@ void manage_heater()
// For a thermistor, it uses the RepRap thermistor temp table. // For a thermistor, it uses the RepRap thermistor temp table.
// This is needed because PID in hydra firmware hovers around a given analog value, not a temp value. // This is needed because PID in hydra firmware hovers around a given analog value, not a temp value.
// This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware. // This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware.
int temp2analog(int celsius) { int temp2analog(int celsius, uint8_t e) {
#ifdef HEATER_0_USES_THERMISTOR if(e >= EXTRUDERS)
{
SERIAL_ERROR_START;
SERIAL_ERROR((int)e);
SERIAL_ERRORLNPGM(" - Invalid extruder number!");
kill();
}
if(heater_ttbl_map[e] != 0)
{
int raw = 0; int raw = 0;
byte i; byte i;
short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
for (i=1; i<NUMTEMPS_HEATER_0; i++) for (i=1; i<heater_ttbllen_map[e]; i++)
{ {
if (PGM_RD_W(heater_0_temptable[i][1]) < celsius) if (PGM_RD_W((*tt)[i][1]) < celsius)
{ {
raw = PGM_RD_W(heater_0_temptable[i-1][0]) + raw = PGM_RD_W((*tt)[i-1][0]) +
(celsius - PGM_RD_W(heater_0_temptable[i-1][1])) * (celsius - PGM_RD_W((*tt)[i-1][1])) *
(PGM_RD_W(heater_0_temptable[i][0]) - PGM_RD_W(heater_0_temptable[i-1][0])) / (PGM_RD_W((*tt)[i][0]) - PGM_RD_W((*tt)[i-1][0])) /
(PGM_RD_W(heater_0_temptable[i][1]) - PGM_RD_W(heater_0_temptable[i-1][1])); (PGM_RD_W((*tt)[i][1]) - PGM_RD_W((*tt)[i-1][1]));
break; break;
} }
} }
// Overflow: Set to last value in the table // Overflow: Set to last value in the table
if (i == NUMTEMPS_HEATER_0) raw = PGM_RD_W(heater_0_temptable[i-1][0]); if (i == heater_ttbllen_map[e]) raw = PGM_RD_W((*tt)[i-1][0]);
return (1023 * OVERSAMPLENR) - raw; return (1023 * OVERSAMPLENR) - raw;
#elif defined HEATER_0_USES_AD595 }
return celsius * (1024.0 / (5.0 * 100.0) ) * OVERSAMPLENR; return celsius * (1024.0 / (5.0 * 100.0) ) * OVERSAMPLENR;
#endif
} }
// Takes bed temperature value as input and returns corresponding raw value. // Takes bed temperature value as input and returns corresponding raw value.
@ -245,12 +275,11 @@ int temp2analog(int celsius) {
// This is needed because PID in hydra firmware hovers around a given analog value, not a temp value. // This is needed because PID in hydra firmware hovers around a given analog value, not a temp value.
// This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware. // This function is derived from inversing the logic from a portion of getTemperature() in FiveD RepRap firmware.
int temp2analogBed(int celsius) { int temp2analogBed(int celsius) {
#ifdef BED_USES_THERMISTOR #ifdef BED_USES_THERMISTOR
int raw = 0; int raw = 0;
byte i; byte i;
for (i=1; i<BNUMTEMPS; i++) for (i=1; i<bedtemptable_len; i++)
{ {
if (PGM_RD_W(bedtemptable[i][1]) < celsius) if (PGM_RD_W(bedtemptable[i][1]) < celsius)
{ {
@ -264,45 +293,52 @@ int temp2analogBed(int celsius) {
} }
// Overflow: Set to last value in the table // Overflow: Set to last value in the table
if (i == BNUMTEMPS) raw = PGM_RD_W(bedtemptable[i-1][0]); if (i == bedtemptable_len) raw = PGM_RD_W(bedtemptable[i-1][0]);
return (1023 * OVERSAMPLENR) - raw; return (1023 * OVERSAMPLENR) - raw;
#elif defined BED_USES_AD595 #elif defined BED_USES_AD595
return lround(celsius * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) ); return lround(celsius * (1024.0 * OVERSAMPLENR/ (5.0 * 100.0) ) );
#else #else
#warning No heater-type defined for the bed. #warning No heater-type defined for the bed.
#endif return 0;
return 0; #endif
} }
// Derived from RepRap FiveD extruder::getTemperature() // Derived from RepRap FiveD extruder::getTemperature()
// For hot end temperature measurement. // For hot end temperature measurement.
float analog2temp(int raw) { float analog2temp(int raw, uint8_t e) {
#ifdef HEATER_0_USES_THERMISTOR if(e >= EXTRUDERS)
{
SERIAL_ERROR_START;
SERIAL_ERROR((int)e);
SERIAL_ERRORLNPGM(" - Invalid extruder number !");
kill();
}
if(heater_ttbl_map[e] != 0)
{
float celsius = 0; float celsius = 0;
byte i; byte i;
short (*tt)[][2] = (short (*)[][2])(heater_ttbl_map[e]);
raw = (1023 * OVERSAMPLENR) - raw; raw = (1023 * OVERSAMPLENR) - raw;
for (i=1; i<NUMTEMPS_HEATER_0; i++) for (i=1; i<heater_ttbllen_map[e]; i++)
{ {
if (PGM_RD_W(heater_0_temptable[i][0]) > raw) if (PGM_RD_W((*tt)[i][0]) > raw)
{ {
celsius = PGM_RD_W(heater_0_temptable[i-1][1]) + celsius = PGM_RD_W((*tt)[i-1][1]) +
(raw - PGM_RD_W(heater_0_temptable[i-1][0])) * (raw - PGM_RD_W((*tt)[i-1][0])) *
(float)(PGM_RD_W(heater_0_temptable[i][1]) - PGM_RD_W(heater_0_temptable[i-1][1])) / (float)(PGM_RD_W((*tt)[i][1]) - PGM_RD_W((*tt)[i-1][1])) /
(float)(PGM_RD_W(heater_0_temptable[i][0]) - PGM_RD_W(heater_0_temptable[i-1][0])); (float)(PGM_RD_W((*tt)[i][0]) - PGM_RD_W((*tt)[i-1][0]));
break; break;
} }
} }
// Overflow: Set to last value in the table // Overflow: Set to last value in the table
if (i == NUMTEMPS_HEATER_0) celsius = PGM_RD_W(heater_0_temptable[i-1][1]); if (i == heater_ttbllen_map[e]) celsius = PGM_RD_W((*tt)[i-1][1]);
return celsius; return celsius;
#elif defined HEATER_0_USES_AD595 }
return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR; return raw * ((5.0 * 100.0) / 1024.0) / OVERSAMPLENR;
#else
#error PLEASE DEFINE HEATER TYPE
#endif
} }
// Derived from RepRap FiveD extruder::getTemperature() // Derived from RepRap FiveD extruder::getTemperature()
@ -314,7 +350,7 @@ float analog2tempBed(int raw) {
raw = (1023 * OVERSAMPLENR) - raw; raw = (1023 * OVERSAMPLENR) - raw;
for (i=1; i<BNUMTEMPS; i++) for (i=1; i<bedtemptable_len; i++)
{ {
if (PGM_RD_W(bedtemptable[i][0]) > raw) if (PGM_RD_W(bedtemptable[i][0]) > raw)
{ {
@ -328,7 +364,7 @@ float analog2tempBed(int raw) {
} }
// Overflow: Set to last value in the table // Overflow: Set to last value in the table
if (i == BNUMTEMPS) celsius = PGM_RD_W(bedtemptable[i-1][1]); if (i == bedtemptable_len) celsius = PGM_RD_W(bedtemptable[i-1][1]);
return celsius; return celsius;
@ -342,6 +378,19 @@ float analog2tempBed(int raw) {
void tp_init() void tp_init()
{ {
// Finish init of mult extruder arrays
for(int e = 0; e < EXTRUDERS; e++) {
// populate with the first value
#ifdef WATCHPERIOD
watch_raw[e] = watch_raw[0];
#endif
maxttemp[e] = maxttemp[0];
#ifdef PIDTEMP
temp_iState_min[e] = 0.0;
temp_iState_max[e] = PID_INTEGRAL_DRIVE_MAX / Ki;
#endif //PIDTEMP
}
#if (HEATER_0_PIN > -1) #if (HEATER_0_PIN > -1)
SET_OUTPUT(HEATER_0_PIN); SET_OUTPUT(HEATER_0_PIN);
#endif #endif
@ -351,11 +400,12 @@ void tp_init()
#if (HEATER_2_PIN > -1) #if (HEATER_2_PIN > -1)
SET_OUTPUT(HEATER_2_PIN); SET_OUTPUT(HEATER_2_PIN);
#endif #endif
#if (HEATER_BED_PIN > -1)
#ifdef PIDTEMP SET_OUTPUT(HEATER_BED_PIN);
temp_iState_min = 0.0; #endif
temp_iState_max = PID_INTEGRAL_DRIVE_MAX / Ki; #if (FAN_PIN > -1)
#endif //PIDTEMP SET_OUTPUT(FAN_PIN);
#endif
// Set analog inputs // Set analog inputs
ADCSRA = 1<<ADEN | 1<<ADSC | 1<<ADIF | 0x07; ADCSRA = 1<<ADEN | 1<<ADSC | 1<<ADIF | 0x07;
@ -387,6 +437,14 @@ void tp_init()
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
#endif #endif
#endif #endif
#if (TEMP_BED_PIN > -1)
#if TEMP_BED_PIN < 8
DIDR0 |= 1<<TEMP_BED_PIN;
#else
DIDR2 |= 1<<(TEMP_BED_PIN - 8);
ADCSRB = 1<<MUX5;
#endif
#endif
// Use timer0 for temperature measurement // Use timer0 for temperature measurement
// Interleave temperature interrupt with millies interrupt // Interleave temperature interrupt with millies interrupt
@ -394,27 +452,34 @@ void tp_init()
TIMSK0 |= (1<<OCIE0B); TIMSK0 |= (1<<OCIE0B);
// Wait for temperature measurement to settle // Wait for temperature measurement to settle
delay(200); delay(250);
#ifdef HEATER_0_MINTEMP #ifdef HEATER_0_MINTEMP
minttemp_0 = temp2analog(HEATER_0_MINTEMP); minttemp[0] = temp2analog(HEATER_0_MINTEMP, 0);
#endif //MINTEMP #endif //MINTEMP
#ifdef HEATER_0_MAXTEMP #ifdef HEATER_0_MAXTEMP
maxttemp_0 = temp2analog(HEATER_0_MAXTEMP); maxttemp[0] = temp2analog(HEATER_0_MAXTEMP, 0);
#endif //MAXTEMP #endif //MAXTEMP
#ifdef HEATER_1_MINTEMP #if (EXTRUDERS > 1) && defined(HEATER_1_MINTEMP)
minttemp_1 = temp2analog(HEATER_1_MINTEMP); minttemp[1] = temp2analog(HEATER_1_MINTEMP, 1);
#endif //MINTEMP #endif // MINTEMP 1
#ifdef HEATER_1_MAXTEMP #if (EXTRUDERS > 1) && defined(HEATER_1_MAXTEMP)
maxttemp_1 = temp2analog(HEATER_1_MAXTEMP); maxttemp[1] = temp2analog(HEATER_1_MAXTEMP, 1);
#endif //MAXTEMP #endif //MAXTEMP 1
#if (EXTRUDERS > 2) && defined(HEATER_2_MINTEMP)
minttemp[2] = temp2analog(HEATER_2_MINTEMP, 2);
#endif //MINTEMP 2
#if (EXTRUDERS > 2) && defined(HEATER_2_MAXTEMP)
maxttemp[2] = temp2analog(HEATER_2_MAXTEMP, 2);
#endif //MAXTEMP 2
#ifdef BED_MINTEMP #ifdef BED_MINTEMP
bed_minttemp = temp2analog(BED_MINTEMP); bed_minttemp = temp2analogBed(BED_MINTEMP);
#endif //BED_MINTEMP #endif //BED_MINTEMP
#ifdef BED_MAXTEMP #ifdef BED_MAXTEMP
bed_maxttemp = temp2analog(BED_MAXTEMP); bed_maxttemp = temp2analogBed(BED_MAXTEMP);
#endif //BED_MAXTEMP #endif //BED_MAXTEMP
} }
@ -423,15 +488,16 @@ void tp_init()
void setWatch() void setWatch()
{ {
#ifdef WATCHPERIOD #ifdef WATCHPERIOD
if(isHeatingHotend0()) int t = 0;
for (int e = 0; e < EXTRUDERS; e++)
{ {
watchmillis = max(1,millis()); if(isHeatingHotend(e))
watch_raw[TEMPSENSOR_HOTEND_0] = current_raw[TEMPSENSOR_HOTEND_0]; {
} t = max(t,millis());
else watch_raw[e] = current_raw[e];
{ }
watchmillis = 0;
} }
watchmillis = t;
#endif #endif
} }
@ -458,6 +524,13 @@ void disable_heater()
digitalWrite(HEATER_2_PIN,LOW); digitalWrite(HEATER_2_PIN,LOW);
#endif #endif
#endif #endif
#if TEMP_BED_PIN > -1
target_raw_bed=0;
#if HEATER_BED_PIN > -1
digitalWrite(HEATER_BED_PIN,LOW);
#endif
#endif
} }
// Timer 0 is shared with millies // Timer 0 is shared with millies
@ -468,6 +541,7 @@ ISR(TIMER0_COMPB_vect)
static unsigned long raw_temp_0_value = 0; static unsigned long raw_temp_0_value = 0;
static unsigned long raw_temp_1_value = 0; static unsigned long raw_temp_1_value = 0;
static unsigned long raw_temp_2_value = 0; static unsigned long raw_temp_2_value = 0;
static unsigned long raw_temp_bed_value = 0;
static unsigned char temp_state = 0; static unsigned char temp_state = 0;
switch(temp_state) { switch(temp_state) {
@ -492,7 +566,26 @@ ISR(TIMER0_COMPB_vect)
#endif #endif
temp_state = 2; temp_state = 2;
break; break;
case 2: // Prepare TEMP_1 case 2: // Prepare TEMP_BED
#if (TEMP_BED_PIN > -1)
#if TEMP_BED_PIN > 7
ADCSRB = 1<<MUX5;
#endif
ADMUX = ((1 << REFS0) | (TEMP_BED_PIN & 0x07));
ADCSRA |= 1<<ADSC; // Start conversion
#endif
#ifdef ULTIPANEL
buttons_check();
#endif
temp_state = 3;
break;
case 3: // Measure TEMP_BED
#if (TEMP_BED_PIN > -1)
raw_temp_bed_value += ADC;
#endif
temp_state = 4;
break;
case 4: // Prepare TEMP_1
#if (TEMP_1_PIN > -1) #if (TEMP_1_PIN > -1)
#if TEMP_1_PIN > 7 #if TEMP_1_PIN > 7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
@ -505,15 +598,15 @@ ISR(TIMER0_COMPB_vect)
#ifdef ULTIPANEL #ifdef ULTIPANEL
buttons_check(); buttons_check();
#endif #endif
temp_state = 3; temp_state = 5;
break; break;
case 3: // Measure TEMP_1 case 5: // Measure TEMP_1
#if (TEMP_1_PIN > -1) #if (TEMP_1_PIN > -1)
raw_temp_1_value += ADC; raw_temp_1_value += ADC;
#endif #endif
temp_state = 4; temp_state = 6;
break; break;
case 4: // Prepare TEMP_2 case 6: // Prepare TEMP_2
#if (TEMP_2_PIN > -1) #if (TEMP_2_PIN > -1)
#if TEMP_2_PIN > 7 #if TEMP_2_PIN > 7
ADCSRB = 1<<MUX5; ADCSRB = 1<<MUX5;
@ -526,9 +619,9 @@ ISR(TIMER0_COMPB_vect)
#ifdef ULTIPANEL #ifdef ULTIPANEL
buttons_check(); buttons_check();
#endif #endif
temp_state = 5; temp_state = 7;
break; break;
case 5: // Measure TEMP_2 case 7: // Measure TEMP_2
#if (TEMP_2_PIN > -1) #if (TEMP_2_PIN > -1)
raw_temp_2_value += ADC; raw_temp_2_value += ADC;
#endif #endif
@ -541,7 +634,7 @@ ISR(TIMER0_COMPB_vect)
break; break;
} }
if(temp_count >= 16) // 6 ms * 16 = 96ms. if(temp_count >= 16) // 8 ms * 16 = 128ms.
{ {
#ifdef HEATER_0_USES_AD595 #ifdef HEATER_0_USES_AD595
current_raw[0] = raw_temp_0_value; current_raw[0] = raw_temp_0_value;
@ -549,16 +642,26 @@ ISR(TIMER0_COMPB_vect)
current_raw[0] = 16383 - raw_temp_0_value; current_raw[0] = 16383 - raw_temp_0_value;
#endif #endif
#if EXTRUDERS > 1
#ifdef HEATER_1_USES_AD595 #ifdef HEATER_1_USES_AD595
current_raw[1] = raw_temp_1_value;
#else
current_raw[1] = 16383 - raw_temp_1_value;
#endif
#endif
#if EXTRUDERS > 2
#ifdef HEATER_2_USES_AD595
current_raw[2] = raw_temp_2_value; current_raw[2] = raw_temp_2_value;
#else #else
current_raw[2] = 16383 - raw_temp_2_value; current_raw[2] = 16383 - raw_temp_2_value;
#endif #endif
#endif
#ifdef BED_USES_AD595 #ifdef BED_USES_AD595
current_raw[1] = raw_temp_1_value; current_raw_bed = raw_temp_bed_value;
#else #else
current_raw[1] = 16383 - raw_temp_1_value; current_raw_bed = 16383 - raw_temp_bed_value;
#endif #endif
temp_meas_ready = true; temp_meas_ready = true;
@ -566,77 +669,36 @@ ISR(TIMER0_COMPB_vect)
raw_temp_0_value = 0; raw_temp_0_value = 0;
raw_temp_1_value = 0; raw_temp_1_value = 0;
raw_temp_2_value = 0; raw_temp_2_value = 0;
#ifdef HEATER_0_MAXTEMP raw_temp_bed_value = 0;
#if (HEATER_0_PIN > -1)
if(current_raw[TEMPSENSOR_HOTEND_0] >= maxttemp_0) { for(int e = 0; e < EXTRUDERS; e++) {
target_raw[TEMPSENSOR_HOTEND_0] = 0; if(current_raw[e] >= maxttemp[e]) {
digitalWrite(HEATER_0_PIN, 0); target_raw[e] = 0;
digitalWrite(heater_pin_map[e], 0);
SERIAL_ERROR_START; SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Temperature extruder 0 switched off. MAXTEMP triggered !!"); SERIAL_ERRORLN((int)e);
SERIAL_ERRORLNPGM(": Extruder switched off. MAXTEMP triggered !");
kill(); kill();
} }
#endif if(current_raw[e] <= minttemp[e]) {
#endif target_raw[e] = 0;
#ifdef HEATER_1_MAXTEMP digitalWrite(heater_pin_map[e], 0);
#if (HEATER_1_PIN > -1) SERIAL_ERROR_START;
if(current_raw[TEMPSENSOR_HOTEND_1] >= maxttemp_1) { SERIAL_ERRORLN(e);
target_raw[TEMPSENSOR_HOTEND_1] = 0; SERIAL_ERRORLNPGM(": Extruder switched off. MINTEMP triggered !");
digitalWrite(HEATER_2_PIN, 0); kill();
SERIAL_ERROR_START; }
SERIAL_ERRORLNPGM("Temperature extruder 1 switched off. MAXTEMP triggered !!"); }
kill();
}
#endif
#endif //MAXTEMP
#ifdef HEATER_0_MINTEMP #if defined(BED_MAXTEMP) && (HEATER_BED_PIN > -1)
#if (HEATER_0_PIN > -1) if(current_raw_bed >= bed_maxttemp) {
if(current_raw[TEMPSENSOR_HOTEND_0] <= minttemp_0) { target_raw_bed = 0;
target_raw[TEMPSENSOR_HOTEND_0] = 0; digitalWrite(HEATER_BED_PIN, 0);
digitalWrite(HEATER_0_PIN, 0); SERIAL_ERROR_START;
SERIAL_ERROR_START; SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!");
SERIAL_ERRORLNPGM("Temperature extruder 0 switched off. MINTEMP triggered !!"); kill();
kill(); }
} #endif
#endif
#endif
#ifdef HEATER_1_MINTEMP
#if (HEATER_2_PIN > -1)
if(current_raw[TEMPSENSOR_HOTEND_1] <= minttemp_1) {
target_raw[TEMPSENSOR_HOTEND_1] = 0;
digitalWrite(HEATER_2_PIN, 0);
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Temperature extruder 1 switched off. MINTEMP triggered !!");
kill();
}
#endif
#endif //MAXTEMP
#ifdef BED_MINTEMP
#if (HEATER_1_PIN > -1)
if(current_raw[1] <= bed_minttemp) {
target_raw[1] = 0;
digitalWrite(HEATER_1_PIN, 0);
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Temperatur heated bed switched off. MINTEMP triggered !!");
kill();
}
#endif
#endif
#ifdef BED_MAXTEMP
#if (HEATER_1_PIN > -1)
if(current_raw[1] >= bed_maxttemp) {
target_raw[1] = 0;
digitalWrite(HEATER_1_PIN, 0);
SERIAL_ERROR_START;
SERIAL_ERRORLNPGM("Temperature heated bed switched off. MAXTEMP triggered !!");
kill();
}
#endif
#endif
} }
} }

119
Marlin/temperature.h
View file

@ -31,95 +31,110 @@
void tp_init(); //initialise the heating void tp_init(); //initialise the heating
void manage_heater(); //it is critical that this is called periodically. void manage_heater(); //it is critical that this is called periodically.
enum TempSensor {TEMPSENSOR_HOTEND_0=0,TEMPSENSOR_BED=1, TEMPSENSOR_HOTEND_1=2};
//low leven conversion routines //low leven conversion routines
// do not use this routines and variables outsie of temperature.cpp // do not use this routines and variables outsie of temperature.cpp
int temp2analog(int celsius); int temp2analog(int celsius, uint8_t e);
int temp2analogBed(int celsius); int temp2analogBed(int celsius);
float analog2temp(int raw); float analog2temp(int raw, uint8_t e);
float analog2tempBed(int raw); float analog2tempBed(int raw);
extern int target_raw[3]; extern int target_raw[EXTRUDERS];
extern int heatingtarget_raw[3]; extern int heatingtarget_raw[EXTRUDERS];
extern int current_raw[3]; extern int current_raw[EXTRUDERS];
extern int target_raw_bed;
extern int current_raw_bed;
extern float Kp,Ki,Kd,Kc; extern float Kp,Ki,Kd,Kc;
#ifdef PIDTEMP #ifdef PIDTEMP
extern float pid_setpoint ; extern float pid_setpoint[EXTRUDERS];
#endif #endif
#ifdef WATCHPERIOD #ifdef WATCHPERIOD
extern int watch_raw[3] ; extern int watch_raw[EXTRUDERS] ;
extern unsigned long watchmillis; extern unsigned long watchmillis;
#endif #endif
//high level conversion routines, for use outside of temperature.cpp //high level conversion routines, for use outside of temperature.cpp
//inline so that there is no performance decrease. //inline so that there is no performance decrease.
//deg=degreeCelsius //deg=degreeCelsius
FORCE_INLINE float degHotend0(){ return analog2temp(current_raw[TEMPSENSOR_HOTEND_0]);}; FORCE_INLINE float degHotend(uint8_t extruder) {
FORCE_INLINE float degHotend1(){ return analog2temp(current_raw[TEMPSENSOR_HOTEND_1]);}; return analog2temp(current_raw[extruder], extruder);
FORCE_INLINE float degBed() { return analog2tempBed(current_raw[TEMPSENSOR_BED]);};
FORCE_INLINE float degHotend(uint8_t extruder){
if(extruder == 0) return analog2temp(current_raw[TEMPSENSOR_HOTEND_0]);
if(extruder == 1) return analog2temp(current_raw[TEMPSENSOR_HOTEND_1]);
}; };
FORCE_INLINE float degTargetHotend0() { return analog2temp(target_raw[TEMPSENSOR_HOTEND_0]);}; FORCE_INLINE float degBed() {
FORCE_INLINE float degTargetHotend1() { return analog2temp(target_raw[TEMPSENSOR_HOTEND_1]);}; return analog2tempBed(current_raw_bed);
FORCE_INLINE float degTargetHotend(uint8_t extruder){
if(extruder == 0) return analog2temp(target_raw[TEMPSENSOR_HOTEND_0]);
if(extruder == 1) return analog2temp(target_raw[TEMPSENSOR_HOTEND_1]);
}; };
FORCE_INLINE float degTargetBed() { return analog2tempBed(target_raw[TEMPSENSOR_BED]);}; FORCE_INLINE float degTargetHotend(uint8_t extruder) {
return analog2temp(target_raw[extruder], extruder);
FORCE_INLINE void setTargetHotend0(const float &celsius) };
{
target_raw[TEMPSENSOR_HOTEND_0]=temp2analog(celsius); FORCE_INLINE float degTargetBed() {
heatingtarget_raw[TEMPSENSOR_HOTEND_0]=temp2analog(celsius-HEATING_EARLY_FINISH_DEG_OFFSET); return analog2tempBed(target_raw_bed);
#ifdef PIDTEMP };
pid_setpoint = celsius;
#endif //PIDTEMP FORCE_INLINE void setTargetHotend(const float &celsius, uint8_t extruder) {
target_raw[extruder] = temp2analog(celsius, extruder);
#ifdef PIDTEMP
pid_setpoint[extruder] = celsius;
#endif //PIDTEMP
};
FORCE_INLINE void setTargetBed(const float &celsius) {
target_raw_bed = temp2analogBed(celsius);
}; };
FORCE_INLINE void setTargetHotend1(const float &celsius) { target_raw[TEMPSENSOR_HOTEND_1]=temp2analog(celsius);};
FORCE_INLINE void setTargetHotend(const float &celcius, uint8_t extruder){
if(extruder == 0) setTargetHotend0(celcius);
if(extruder == 1) setTargetHotend1(celcius);
};
FORCE_INLINE void setTargetBed(const float &celsius) { target_raw[TEMPSENSOR_BED ]=temp2analogBed(celsius);};
FORCE_INLINE bool isHeatingHotend0() {return heatingtarget_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0];};
FORCE_INLINE bool isHeatingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];};
FORCE_INLINE bool isHeatingHotend(uint8_t extruder){ FORCE_INLINE bool isHeatingHotend(uint8_t extruder){
if(extruder == 0) return heatingtarget_raw[TEMPSENSOR_HOTEND_0] > current_raw[TEMPSENSOR_HOTEND_0]; return target_raw[extruder] > current_raw[extruder];
if(extruder == 1) return target_raw[TEMPSENSOR_HOTEND_1] > current_raw[TEMPSENSOR_HOTEND_1];
return false;
}; };
FORCE_INLINE bool isHeatingBed() {return target_raw[TEMPSENSOR_BED] > current_raw[TEMPSENSOR_BED];};
FORCE_INLINE bool isCoolingHotend0() {return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];}; FORCE_INLINE bool isHeatingBed() {
FORCE_INLINE bool isCoolingHotend1() {return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];}; return target_raw_bed > current_raw_bed;
FORCE_INLINE bool isCoolingHotend(uint8_t extruder){
if(extruder == 0) return target_raw[TEMPSENSOR_HOTEND_0] < current_raw[TEMPSENSOR_HOTEND_0];
if(extruder == 1) return target_raw[TEMPSENSOR_HOTEND_1] < current_raw[TEMPSENSOR_HOTEND_1];
return false;
}; };
FORCE_INLINE bool isCoolingBed() {return target_raw[TEMPSENSOR_BED] < current_raw[TEMPSENSOR_BED];};
FORCE_INLINE bool isCoolingHotend(uint8_t extruder) {
return target_raw[extruder] < current_raw[extruder];
};
FORCE_INLINE bool isCoolingBed() {
return target_raw_bed < current_raw_bed;
};
#define degHotend0() degHotend(0)
#define degTargetHotend0() degTargetHotend(0)
#define setTargetHotend0(_celsius) setTargetHotend((_celsius), 0)
#define isHeatingHotend0() isHeatingHotend(0)
#define isCoolingHotend0() isCoolingHotend(0)
#if EXTRUDERS > 1
#define degHotend1() degHotend(1)
#define degTargetHotend1() degTargetHotend(1)
#define setTargetHotend1(_celsius) setTargetHotend((_celsius), 1)
#define isHeatingHotend1() isHeatingHotend(1)
#define isCoolingHotend1() isCoolingHotend(1)
#endif
#if EXTRUDERS > 2
#define degHotend2() degHotend(2)
#define degTargetHotend2() degTargetHotend(2)
#define setTargetHotend2(_celsius) setTargetHotend((_celsius), 2)
#define isHeatingHotend2() isHeatingHotend(2)
#define isCoolingHotend2() isCoolingHotend(2)
#endif
#if EXTRUDERS > 3
#error Invalid number of extruders
#endif
FORCE_INLINE void autotempShutdown(){ FORCE_INLINE void autotempShutdown(){
#ifdef AUTOTEMP #ifdef AUTOTEMP
if(autotemp_enabled) if(autotemp_enabled)
{ {
autotemp_enabled=false; autotemp_enabled=false;
if(degTargetHotend0()>autotemp_min) if(degTargetHotend(ACTIVE_EXTRUDER)>autotemp_min)
setTargetHotend0(0); setTargetHotend(0,ACTIVE_EXTRUDER);
} }
#endif #endif
} }
void disable_heater(); void disable_heater();
void setWatch(); void setWatch();
void updatePID(); void updatePID();

147
Marlin/thermistortables.h
View file

@ -5,10 +5,9 @@
#define OVERSAMPLENR 16 #define OVERSAMPLENR 16
#if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORBED == 1) //100k bed thermistor #if (THERMISTORHEATER_0 == 1) || (THERMISTORHEATER_1 == 1) || (THERMISTORHEATER_2 == 1) || (THERMISTORBED == 1) //100k bed thermistor
#define NUMTEMPS_1 61 const short temptable_1[][2] PROGMEM = {
const short temptable_1[NUMTEMPS_1][2] PROGMEM = {
{ 23*OVERSAMPLENR , 300 }, { 23*OVERSAMPLENR , 300 },
{ 25*OVERSAMPLENR , 295 }, { 25*OVERSAMPLENR , 295 },
{ 27*OVERSAMPLENR , 290 }, { 27*OVERSAMPLENR , 290 },
@ -72,9 +71,8 @@ const short temptable_1[NUMTEMPS_1][2] PROGMEM = {
{ 1008*OVERSAMPLENR , 0 } //safety { 1008*OVERSAMPLENR , 0 } //safety
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORBED == 2) //200k bed thermistor #if (THERMISTORHEATER_0 == 2) || (THERMISTORHEATER_1 == 2) || (THERMISTORHEATER_2 == 2) || (THERMISTORBED == 2) //200k bed thermistor
#define NUMTEMPS_2 21 const short temptable_2[][2] PROGMEM = {
const short temptable_2[NUMTEMPS_2][2] PROGMEM = {
{1*OVERSAMPLENR, 848}, {1*OVERSAMPLENR, 848},
{54*OVERSAMPLENR, 275}, {54*OVERSAMPLENR, 275},
{107*OVERSAMPLENR, 228}, {107*OVERSAMPLENR, 228},
@ -99,9 +97,8 @@ const short temptable_2[NUMTEMPS_2][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORBED == 3) //mendel-parts #if (THERMISTORHEATER_0 == 3) || (THERMISTORHEATER_1 == 3) || (THERMISTORHEATER_2 == 3) || (THERMISTORBED == 3) //mendel-parts
#define NUMTEMPS_3 28 const short temptable_3[][2] PROGMEM = {
const short temptable_3[NUMTEMPS_3][2] PROGMEM = {
{1*OVERSAMPLENR,864}, {1*OVERSAMPLENR,864},
{21*OVERSAMPLENR,300}, {21*OVERSAMPLENR,300},
{25*OVERSAMPLENR,290}, {25*OVERSAMPLENR,290},
@ -133,10 +130,8 @@ const short temptable_3[NUMTEMPS_3][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORBED == 4) //10k thermistor #if (THERMISTORHEATER_0 == 4) || (THERMISTORHEATER_1 == 4) || (THERMISTORHEATER_2 == 4) || (THERMISTORBED == 4) //10k thermistor
const short temptable_4[][2] PROGMEM = {
#define NUMTEMPS_4 20
const short temptable_4[NUMTEMPS_4][2] PROGMEM = {
{1*OVERSAMPLENR, 430}, {1*OVERSAMPLENR, 430},
{54*OVERSAMPLENR, 137}, {54*OVERSAMPLENR, 137},
{107*OVERSAMPLENR, 107}, {107*OVERSAMPLENR, 107},
@ -160,10 +155,8 @@ const short temptable_4[NUMTEMPS_4][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2) #if (THERMISTORHEATER_0 == 5) || (THERMISTORHEATER_1 == 5) || (THERMISTORHEATER_2 == 5) || (THERMISTORBED == 5) //100k ParCan thermistor (104GT-2)
const short temptable_5[][2] PROGMEM = {
#define NUMTEMPS_5 61
const short temptable_5[NUMTEMPS_5][2] PROGMEM = {
{1*OVERSAMPLENR, 713}, {1*OVERSAMPLENR, 713},
{18*OVERSAMPLENR, 316}, {18*OVERSAMPLENR, 316},
{35*OVERSAMPLENR, 266}, {35*OVERSAMPLENR, 266},
@ -228,9 +221,8 @@ const short temptable_5[NUMTEMPS_5][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor #if (THERMISTORHEATER_0 == 6) || (THERMISTORHEATER_1 == 6) || (THERMISTORHEATER_2 == 6) || (THERMISTORBED == 6) // 100k Epcos thermistor
#define NUMTEMPS_6 36 const short temptable_6[][2] PROGMEM = {
const short temptable_6[NUMTEMPS_6][2] PROGMEM = {
{28*OVERSAMPLENR, 250}, {28*OVERSAMPLENR, 250},
{31*OVERSAMPLENR, 245}, {31*OVERSAMPLENR, 245},
{35*OVERSAMPLENR, 240}, {35*OVERSAMPLENR, 240},
@ -270,9 +262,8 @@ const short temptable_6[NUMTEMPS_6][2] PROGMEM = {
}; };
#endif #endif
#if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01 #if (THERMISTORHEATER_0 == 7) || (THERMISTORHEATER_1 == 7) || (THERMISTORHEATER_2 == 7) || (THERMISTORBED == 7) // 100k Honeywell 135-104LAG-J01
#define NUMTEMPS_7 54 const short temptable_7[][2] PROGMEM = {
const short temptable_7[NUMTEMPS_7][2] PROGMEM = {
{46*OVERSAMPLENR, 270}, {46*OVERSAMPLENR, 270},
{50*OVERSAMPLENR, 265}, {50*OVERSAMPLENR, 265},
{54*OVERSAMPLENR, 260}, {54*OVERSAMPLENR, 260},
@ -330,82 +321,52 @@ const short temptable_7[NUMTEMPS_7][2] PROGMEM = {
}; };
#endif #endif
#define _TT_NAME(_N) temptable_ ## _N
#define TT_NAME(_N) _TT_NAME(_N)
#ifdef THERMISTORHEATER_0
#if THERMISTORHEATER_0 == 1 #define heater_0_temptable TT_NAME(THERMISTORHEATER_0)
#define NUMTEMPS_HEATER_0 NUMTEMPS_1 #define heater_0_temptable_len (sizeof(heater_0_temptable)/sizeof(*heater_0_temptable))
#define heater_0_temptable temptable_1 #else
#elif THERMISTORHEATER_0 == 2 #ifdef HEATER_0_USES_THERMISTOR
#define NUMTEMPS_HEATER_0 NUMTEMPS_2 #error No heater 0 thermistor table specified
#define heater_0_temptable temptable_2 #else // HEATER_0_USES_THERMISTOR
#elif THERMISTORHEATER_0 == 3 #define heater_0_temptable 0
#define NUMTEMPS_HEATER_0 NUMTEMPS_3 #define heater_0_temptable_len 0
#define heater_0_temptable temptable_3 #endif // HEATER_0_USES_THERMISTOR
#elif THERMISTORHEATER_0 == 4
#define NUMTEMPS_HEATER_0 NUMTEMPS_4
#define heater_0_temptable temptable_4
#elif THERMISTORHEATER_0 == 5
#define NUMTEMPS_HEATER_0 NUMTEMPS_5
#define heater_0_temptable temptable_5
#elif THERMISTORHEATER_0 == 6
#define NUMTEMPS_HEATER_0 NUMTEMPS_6
#define heater_0_temptable temptable_6
#elif THERMISTORHEATER_0 == 7
#define NUMTEMPS_HEATER_0 NUMTEMPS_7
#define heater_0_temptable temptable_7
#elif defined HEATER_0_USES_THERMISTOR
#error No heater 0 thermistor table specified
#endif #endif
#if THERMISTORHEATER_1 == 1 #ifdef THERMISTORHEATER_1
#define NUMTEMPS_HEATER_1 NUMTEMPS_1 #define heater_1_temptable TT_NAME(THERMISTORHEATER_1)
#define heater_1_temptable temptable_1 #define heater_1_temptable_len (sizeof(heater_1_temptable)/sizeof(*heater_1_temptable))
#elif THERMISTORHEATER_1 == 2 #else
#define NUMTEMPS_HEATER_1 NUMTEMPS_2 #ifdef HEATER_1_USES_THERMISTOR
#define heater_1_temptable temptable_2 #error No heater 1 thermistor table specified
#elif THERMISTORHEATER_1 == 3 #else // HEATER_1_USES_THERMISTOR
#define NUMTEMPS_HEATER_1 NUMTEMPS_3 #define heater_1_temptable 0
#define heater_1_temptable temptable_3 #define heater_1_temptable_len 0
#elif THERMISTORHEATER_1 == 4 #endif // HEATER_1_USES_THERMISTOR
#define NUMTEMPS_HEATER_1 NUMTEMPS_4
#define heater_1_temptable temptable_4
#elif THERMISTORHEATER_1 == 5
#define NUMTEMPS_HEATER_1 NUMTEMPS_5
#define heater_1_temptable temptable_5
#elif THERMISTORHEATER_1 == 6
#define NUMTEMPS_HEATER_1 NUMTEMPS_6
#define heater_1_temptable temptable_6
#elif THERMISTORHEATER_1 == 7
#define NUMTEMPS_HEATER_1 NUMTEMPS_7
#define heater_1_temptable temptable_7
#elif defined HEATER_1_USES_THERMISTOR
#error No heater 1 thermistor table specified
#endif #endif
#ifdef THERMISTORHEATER_2
#define heater_2_temptable TT_NAME(THERMISTORHEATER_2)
#define heater_2_temptable_len (sizeof(heater_2_temptable)/sizeof(*heater_2_temptable))
#else
#ifdef HEATER_2_USES_THERMISTOR
#error No heater 2 thermistor table specified
#else // HEATER_2_USES_THERMISTOR
#define heater_2_temptable 0
#define heater_2_temptable_len 0
#endif // HEATER_2_USES_THERMISTOR
#endif
#if THERMISTORBED == 1 #ifdef THERMISTORBED
#define BNUMTEMPS NUMTEMPS_1 #define bedtemptable TT_NAME(THERMISTORBED)
#define bedtemptable temptable_1 #define bedtemptable_len (sizeof(bedtemptable)/sizeof(*bedtemptable))
#elif THERMISTORBED == 2 #else
#define BNUMTEMPS NUMTEMPS_2 #ifdef BED_USES_THERMISTOR
#define bedtemptable temptable_2 #error No bed thermistor table specified
#elif THERMISTORBED == 3 #endif // BED_USES_THERMISTOR
#define BNUMTEMPS NUMTEMPS_3
#define bedtemptable temptable_3
#elif THERMISTORBED == 4
#define BNUMTEMPS NUMTEMPS_4
#define bedtemptable temptable_4
#elif THERMISTORBED == 5
#define BNUMTEMPS NUMTEMPS_5
#define bedtemptable temptable_5
#elif THERMISTORBED == 6
#define BNUMTEMPS NUMTEMPS_6
#define bedtemptable temptable_6
#elif THERMISTORBED == 7
#define BNUMTEMPS NUMTEMPS_7
#define bedtemptable temptable_7
#elif defined BED_USES_THERMISTOR
#error No bed thermistor table specified
#endif #endif
#endif //THERMISTORTABLES_H_ #endif //THERMISTORTABLES_H_