Add alternative TERN macros

Marlin/src/MarlinCore.cpp

@@ -248,7 +248,7 @@ bool wait_for_heatup = true;
   bool wait_for_user; // = false;
 
   void wait_for_user_response(millis_t ms/*=0*/, const bool no_sleep/*=false*/) {
-    TERN(ADVANCED_PAUSE_FEATURE,,UNUSED(no_sleep));
+    UNUSED(no_sleep);
     KEEPALIVE_STATE(PAUSED_FOR_USER);
     wait_for_user = true;
     if (ms) ms += millis(); // expire time

Marlin/src/core/macros.h

@@ -196,6 +196,9 @@
 #define __TERN(T,V...)      ___TERN(_CAT(_NO,T),V)  // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
 #define ___TERN(P,V...)     THIRD(P,V)              // If first argument has a comma, A. Else B.
 
+#define IF_ENABLED          TERN_
+#define IF_DISABLED(O,A)    TERN(O,,A)
+
 #define ANY(V...)          !DISABLED(V)
 #define NONE(V...)          DISABLED(V)
 #define ALL(V...)           ENABLED(V)

Marlin/src/feature/backlash.h

@@ -54,17 +54,17 @@ public:
   #endif
 
   static inline float get_measurement(const AxisEnum a) {
+    UNUSED(a);
     // Return the measurement averaged over all readings
     return TERN(MEASURE_BACKLASH_WHEN_PROBING
       , measured_count[a] > 0 ? measured_mm[a] / measured_count[a] : 0
       , 0
     );
-    TERN(MEASURE_BACKLASH_WHEN_PROBING,,UNUSED(a));
   }
 
   static inline bool has_measurement(const AxisEnum a) {
+    UNUSED(a);
     return TERN0(MEASURE_BACKLASH_WHEN_PROBING, measured_count[a] > 0);
-    TERN(MEASURE_BACKLASH_WHEN_PROBING,,UNUSED(a));
   }
 
   static inline bool has_any_measurement() {

Marlin/src/feature/leds/neopixel.h

@@ -110,7 +110,7 @@ public:
       #if CONJOINED_NEOPIXEL
         adaneo2.show();
       #else
-        TERN(NEOPIXEL2_SEPARATE,,adaneo1.setPin(NEOPIXEL2_PIN));
+        IF_DISABLED(NEOPIXEL2_SEPARATE, adaneo1.setPin(NEOPIXEL2_PIN));
         adaneo1.show();
         adaneo1.setPin(NEOPIXEL_PIN);
       #endif

Marlin/src/lcd/dogm/marlinui_DOGM.cpp

@@ -123,7 +123,7 @@ bool MarlinUI::detected() { return true; }
           custom_start_bmp
         #endif
       ;
-      TERN(CUSTOM_BOOTSCREEN_ANIMATED,,UNUSED(frame));
+      UNUSED(frame);
 
       u8g.drawBitmapP(left, top, CUSTOM_BOOTSCREEN_BMP_BYTEWIDTH, CUSTOM_BOOTSCREEN_BMPHEIGHT, bmp);
 

Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h

@@ -253,6 +253,9 @@
   #define __TERN(T,V...)      ___TERN(_CAT(_NO,T),V)  // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
   #define ___TERN(P,V...)     THIRD(P,V)              // If first argument has a comma, A. Else B.
 
+  #define IF_ENABLED          TERN_
+  #define IF_DISABLED(O,A)    _TERN(_ENA_1(O),,A)
+
   #define ANY(V...)          !DISABLED(V)
   #define NONE(V...)          DISABLED(V)
   #define ALL(V...)           ENABLED(V)

Marlin/src/lcd/menu/menu.cpp

@@ -81,7 +81,7 @@ void MarlinUI::save_previous_screen() {
 }
 
 void MarlinUI::_goto_previous_screen(TERN_(TURBO_BACK_MENU_ITEM, const bool is_back/*=false*/)) {
-  TERN(TURBO_BACK_MENU_ITEM,,constexpr bool is_back = false);
+  IF_DISABLED(TURBO_BACK_MENU_ITEM, constexpr bool is_back = false);
   TERN_(HAS_TOUCH_XPT2046, on_edit_screen = false);
   if (screen_history_depth > 0) {
     menuPosition &sh = screen_history[--screen_history_depth];

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -202,12 +202,12 @@ void menu_backlash();
   // Helpers for editing PID Ki & Kd values
   // grab the PID value out of the temp variable; scale it; then update the PID driver
   void copy_and_scalePID_i(int16_t e) {
-    TERN(PID_PARAMS_PER_HOTEND,,UNUSED(e));
+    UNUSED(e);
     PID_PARAM(Ki, e) = scalePID_i(raw_Ki);
     thermalManager.updatePID();
   }
   void copy_and_scalePID_d(int16_t e) {
-    TERN(PID_PARAMS_PER_HOTEND,,UNUSED(e));
+    UNUSED(e);
     PID_PARAM(Kd, e) = scalePID_d(raw_Kd);
     thermalManager.updatePID();
   }

Marlin/src/lcd/menu/menu_filament.cpp

@@ -219,7 +219,7 @@ static PGM_P pause_header() {
 #define HOTEND_STATUS_ITEM() do { \
   if (_menuLineNr == _thisItemNr) { \
     if (ui.should_draw()) { \
-      TERN(HAS_GRAPHICAL_TFT,, MenuItem_static::draw(_lcdLineNr, GET_TEXT(MSG_FILAMENT_CHANGE_NOZZLE), SS_INVERT)); \
+      IF_DISABLED(HAS_GRAPHICAL_TFT, MenuItem_static::draw(_lcdLineNr, GET_TEXT(MSG_FILAMENT_CHANGE_NOZZLE), SS_INVERT)); \
       ui.draw_hotend_status(_lcdLineNr, hotend_status_extruder); \
     } \
     if (_skipStatic && encoderLine <= _thisItemNr) { \

Marlin/src/lcd/menu/menu_ubl.cpp

@@ -64,7 +64,7 @@ static void _lcd_mesh_fine_tune(PGM_P const msg) {
       ubl.encoder_diff > 0 ? 0.005f : -0.005f
     );
     ubl.encoder_diff = 0;
-    TERN(IS_TFTGLCD_PANEL,,ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
+    IF_DISABLED(IS_TFTGLCD_PANEL, ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
   }
   TERN_(IS_TFTGLCD_PANEL, ui.refresh(LCDVIEW_CALL_REDRAW_NEXT));
 

Marlin/src/module/settings.cpp

@@ -1497,7 +1497,7 @@ void MarlinSettings::postprocess() {
       }
       DEBUG_ECHO_START();
       DEBUG_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
-      TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_version());
+      IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_version());
       eeprom_error = true;
     }
     else {
@@ -2325,13 +2325,13 @@ void MarlinSettings::postprocess() {
       if (eeprom_error) {
         DEBUG_ECHO_START();
         DEBUG_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize());
-        TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_index());
+        IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_index());
       }
       else if (working_crc != stored_crc) {
         eeprom_error = true;
         DEBUG_ERROR_START();
         DEBUG_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
-        TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_crc());
+        IF_DISABLED(EEPROM_AUTO_INIT, ui.eeprom_alert_crc());
       }
       else if (!validating) {
         DEBUG_ECHO_START();

Marlin/src/module/stepper.cpp

@@ -180,7 +180,7 @@ bool Stepper::abort_current_block;
 uint32_t Stepper::acceleration_time, Stepper::deceleration_time;
 uint8_t Stepper::steps_per_isr;
 
-TERN(ADAPTIVE_STEP_SMOOTHING,,constexpr) uint8_t Stepper::oversampling_factor;
+IF_DISABLED(ADAPTIVE_STEP_SMOOTHING, constexpr) uint8_t Stepper::oversampling_factor;
 
 xyze_long_t Stepper::delta_error{0};
 

Marlin/src/module/temperature.cpp

@@ -268,7 +268,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
     int16_t Temperature::maxtemp_raw_BED = HEATER_BED_RAW_HI_TEMP;
   #endif
   TERN_(WATCH_BED, bed_watch_t Temperature::watch_bed); // = { 0 }
-  TERN(PIDTEMPBED,, millis_t Temperature::next_bed_check_ms);
+  IF_DISABLED(PIDTEMPBED, millis_t Temperature::next_bed_check_ms);
 #endif // HAS_HEATED_BED
 
 #if HAS_TEMP_CHAMBER

Marlin/src/module/temperature.h

@@ -392,7 +392,7 @@ class Temperature {
 
     #if HAS_HEATED_BED
       TERN_(WATCH_BED, static bed_watch_t watch_bed);
-      TERN(PIDTEMPBED,,static millis_t next_bed_check_ms);
+      IF_DISABLED(PIDTEMPBED, static millis_t next_bed_check_ms);
       #ifdef BED_MINTEMP
         static int16_t mintemp_raw_BED;
       #endif

Marlin/src/module/tool_change.cpp

@@ -799,8 +799,8 @@ void tool_change_prime() {
     // Park
     #if ENABLED(TOOLCHANGE_PARK)
       if (ok) {
-        TERN(TOOLCHANGE_PARK_Y_ONLY,,current_position.x = toolchange_settings.change_point.x);
+        IF_DISABLED(TOOLCHANGE_PARK_Y_ONLY, current_position.x = toolchange_settings.change_point.x);
-        TERN(TOOLCHANGE_PARK_X_ONLY,,current_position.y = toolchange_settings.change_point.y);
+        IF_DISABLED(TOOLCHANGE_PARK_X_ONLY, current_position.y = toolchange_settings.change_point.y);
         planner.buffer_line(current_position, MMM_TO_MMS(TOOLCHANGE_PARK_XY_FEEDRATE), active_extruder);
         planner.synchronize();
       }
@@ -998,8 +998,8 @@ void tool_change(const uint8_t new_tool, bool no_move/*=false*/) {
       // Toolchange park
       #if ENABLED(TOOLCHANGE_PARK) && DISABLED(SWITCHING_NOZZLE)
         if (can_move_away && toolchange_settings.enable_park) {
-          TERN(TOOLCHANGE_PARK_Y_ONLY,,current_position.x = toolchange_settings.change_point.x);
+          IF_DISABLED(TOOLCHANGE_PARK_Y_ONLY, current_position.x = toolchange_settings.change_point.x);
-          TERN(TOOLCHANGE_PARK_X_ONLY,,current_position.y = toolchange_settings.change_point.y);
+          IF_DISABLED(TOOLCHANGE_PARK_X_ONLY, current_position.y = toolchange_settings.change_point.y);
           planner.buffer_line(current_position, MMM_TO_MMS(TOOLCHANGE_PARK_XY_FEEDRATE), old_tool);
           planner.synchronize();
         }