Patch configs comment formatting
This commit is contained in:
parent
c54f6cf23d
commit
39617e10b8
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -420,10 +420,10 @@
|
||||||
|
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -432,10 +432,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -427,10 +427,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -400,11 +400,11 @@
|
||||||
// Motor Current controlled via PWM (Overridable on supported boards with PWM-driven motor driver current)
|
// Motor Current controlled via PWM (Overridable on supported boards with PWM-driven motor driver current)
|
||||||
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
|
//#define PWM_MOTOR_CURRENT {1300, 1300, 1250} // Values in milliamps
|
||||||
|
|
||||||
// uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C
|
//#define DIGIPOT_I2C
|
||||||
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
// Number of channels available for I2C digipot, For Azteeg X3 Pro we have 8
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8
|
||||||
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0}
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -311,9 +311,9 @@
|
||||||
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||||
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
|
||||||
// Set/get with gcode: M301 E[extruder number, 0-2]
|
// Set/get with gcode: M301 E[extruder number, 0-2]
|
||||||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||||
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||||
#define K1 0.95 //smoothing factor within the PID
|
#define K1 0.95 //smoothing factor within the PID
|
||||||
|
|
||||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||||
|
@ -754,7 +754,6 @@
|
||||||
|
|
||||||
#endif // Z_PROBE_ALLEN_KEY
|
#endif // Z_PROBE_ALLEN_KEY
|
||||||
|
|
||||||
|
|
||||||
/**
|
/**
|
||||||
*
|
*
|
||||||
* *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
* *** PLEASE READ ALL INSTRUCTIONS BELOW FOR SAFETY! ***
|
||||||
|
@ -810,11 +809,10 @@
|
||||||
* ignored by Marlin
|
* ignored by Marlin
|
||||||
*/
|
*/
|
||||||
|
|
||||||
//#define Z_MIN_PROBE_ENDSTOP // A3K leave disable!
|
//#define Z_MIN_PROBE_ENDSTOP // A3K leave disabled!
|
||||||
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
|
||||||
|
|
||||||
|
// Enable Z Probe Repeatability test to see how accurate your probe is
|
||||||
/* Enable Z Probe Repeatability test to see how accurate your probe is */
|
|
||||||
#define Z_MIN_PROBE_REPEATABILITY_TEST
|
#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||||
|
|
||||||
/**
|
/**
|
||||||
|
@ -834,7 +832,7 @@
|
||||||
#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow
|
#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow
|
||||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||||
|
|
||||||
/* For M851 give a range for adjusting the Z probe offset */
|
// For M851 give a range for adjusting the Z probe offset
|
||||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||||
|
|
||||||
|
@ -959,9 +957,9 @@
|
||||||
* leveling in steps so you can manually adjust the Z height at each grid-point.
|
* leveling in steps so you can manually adjust the Z height at each grid-point.
|
||||||
* With an LCD controller the process is guided step-by-step.
|
* With an LCD controller the process is guided step-by-step.
|
||||||
*/
|
*/
|
||||||
//#define AUTO_BED_LEVELING_3POINT // Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling.
|
//#define AUTO_BED_LEVELING_3POINT
|
||||||
//#define AUTO_BED_LEVELING_LINEAR // Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling.
|
//#define AUTO_BED_LEVELING_LINEAR
|
||||||
#define AUTO_BED_LEVELING_BILINEAR // Only AUTO_BED_LEVELING_BILINEAR is supported for DELTA bed leveling.
|
#define AUTO_BED_LEVELING_BILINEAR
|
||||||
//#define AUTO_BED_LEVELING_UBL
|
//#define AUTO_BED_LEVELING_UBL
|
||||||
//#define MESH_BED_LEVELING
|
//#define MESH_BED_LEVELING
|
||||||
|
|
||||||
|
|
|
@ -421,10 +421,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -421,10 +421,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -426,10 +426,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -421,10 +421,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
// actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 } // 5DPRINT
|
#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 } // 5DPRINT
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
|
@ -419,10 +419,10 @@
|
||||||
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
//#define DIGIPOT_MOTOR_CURRENT {135,135,135,135,135} // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
|
||||||
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
|
||||||
|
|
||||||
/* 5DPRINT & AZTEEG_X3_PRO */
|
// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro
|
||||||
//#define DIGIPOT_I2C // uncomment to enable
|
//#define DIGIPOT_I2C
|
||||||
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8
|
||||||
/* actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS */
|
// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
|
||||||
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
#define DIGIPOT_I2C_MOTOR_CURRENTS {1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0} // AZTEEG_X3_PRO
|
||||||
|
|
||||||
//===========================================================================
|
//===========================================================================
|
||||||
|
|
Loading…
Reference in a new issue