From 3dc49fd1c6f0be7b765300c433c905c273f36711 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Sun, 1 Dec 2019 20:06:00 -0600 Subject: [PATCH] Split up hotend / bed drawing --- Marlin/src/lcd/dogm/dogm_Statusscreen.h | 3 +- Marlin/src/lcd/dogm/status_screen_DOGM.cpp | 359 ++++++++++----------- 2 files changed, 176 insertions(+), 186 deletions(-) diff --git a/Marlin/src/lcd/dogm/dogm_Statusscreen.h b/Marlin/src/lcd/dogm/dogm_Statusscreen.h index d0de7da976..78b8deafa2 100644 --- a/Marlin/src/lcd/dogm/dogm_Statusscreen.h +++ b/Marlin/src/lcd/dogm/dogm_Statusscreen.h @@ -1462,7 +1462,8 @@ #else // HOTENDS == 0 - //#error "Incomplete status header" + #define STATUS_HOTEND_TEXT_X(N) 0 + #define STATUS_HEATERS_Y 0 #endif diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index ee4f001e51..7fbd46004c 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -64,6 +64,7 @@ #define STATUS_BASELINE (LCD_PIXEL_HEIGHT - INFO_FONT_DESCENT) #define DO_DRAW_LOGO (STATUS_LOGO_WIDTH && ENABLED(CUSTOM_STATUS_SCREEN_IMAGE)) +#define DO_DRAW_HOTENDS (HOTENDS > 0) #define DO_DRAW_BED (HAS_HEATED_BED && STATUS_BED_WIDTH && HOTENDS <= 4) #define DO_DRAW_CHAMBER (HAS_TEMP_CHAMBER && STATUS_CHAMBER_WIDTH && HOTENDS <= 4) #define DO_DRAW_FAN (HAS_FAN0 && STATUS_FAN_WIDTH && HOTENDS <= 4 && defined(STATUS_FAN_FRAMES)) @@ -102,12 +103,6 @@ #define PROGRESS_BAR_X 54 #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X) -#if ENABLED(MARLIN_DEV_MODE) - #define SHOW_ON_STATE READ(X_MIN_PIN) -#else - #define SHOW_ON_STATE false -#endif - FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) { const char *str = i16tostr3(temp); const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1; @@ -115,95 +110,67 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons lcd_put_wchar(LCD_STR_DEGREE[0]); } -FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const bool blink) { - #if !HEATER_IDLE_HANDLER - UNUSED(blink); - #endif +#if DO_DRAW_HOTENDS - #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) || (HAS_HEATED_BED && ENABLED(STATUS_COMBINE_HEATERS) && HOTENDS <= 4) - const bool isBed = heater < 0; - #define IFBED(A,B) (isBed ? (A) : (B)) - #else - #define IFBED(A,B) (B) - #endif - - #if ENABLED(MARLIN_DEV_MODE) - constexpr bool isHeat = true; - #else - const bool isHeat = IFBED(BED_ALT(), HOTEND_ALT(heater)); - #endif - - #ifndef STATUS_HOTEND_TEXT_X - #define STATUS_HOTEND_TEXT_X(N) 0 - #define STATUS_HEATERS_Y 0 - #endif - - const uint8_t tx = IFBED(STATUS_BED_TEXT_X, STATUS_HOTEND_TEXT_X(heater)); - - #if ENABLED(MARLIN_DEV_MODE) - const float temp = 20 + (millis() >> 8) % IFBED(100, 200), - target = IFBED(100, 200); - #else - const float temp = IFBED(thermalManager.degBed(), thermalManager.degHotend(heater)), - target = IFBED(thermalManager.degTargetBed(), thermalManager.degTargetHotend(heater)); - #endif - - #if DISABLED(STATUS_HOTEND_ANIM) - #define STATIC_HOTEND true - #define HOTEND_DOT isHeat - #else - #define STATIC_HOTEND false - #define HOTEND_DOT false - #endif - - #if DO_DRAW_BED && DISABLED(STATUS_BED_ANIM) - #define STATIC_BED true - #define BED_DOT isHeat - #else - #define STATIC_BED false - #define BED_DOT false - #endif - - #if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS) - #define OFF_BMP(N) status_hotend_b_bmp - #define ON_BMP(N) status_hotend_a_bmp - #elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS) - #define OFF_BMP(N) status_hotend_a_bmp - #define ON_BMP(N) status_hotend_b_bmp - #elif ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED) - #define OFF_BMP(N) status_hotend##N##_b_bmp - #define ON_BMP(N) status_hotend##N##_a_bmp - #else - #define OFF_BMP(N) status_hotend##N##_a_bmp - #define ON_BMP(N) status_hotend##N##_b_bmp - #endif - - #if STATUS_HOTEND_BITMAPS > 1 - static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6)); - #if ANIM_HOTEND - static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6)); - #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)]) - #else - #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)]) + FORCE_INLINE void _draw_hotend_status(const heater_ind_t heater, const bool blink) { + #if !HEATER_IDLE_HANDLER + UNUSED(blink); #endif - #elif ANIM_HOTEND - #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP()) - #else - #define HOTEND_BITMAP(N,S) status_hotend_a_bmp - #endif - if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { + const bool isHeat = HOTEND_ALT(heater); - #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) + const uint8_t tx = STATUS_HOTEND_TEXT_X(heater); - const float prop = target - 20, - perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; - uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); - NOMORE(tall, BAR_TALL); + const float temp = thermalManager.degHotend(heater), + target = thermalManager.degTargetHotend(heater); - #if ANIM_HOTEND - // Draw hotend bitmap, either whole or split by the heating percent - if (IFBED(0, 1)) { + #if DISABLED(STATUS_HOTEND_ANIM) + #define STATIC_HOTEND true + #define HOTEND_DOT isHeat + #else + #define STATIC_HOTEND false + #define HOTEND_DOT false + #endif + + #if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS) + #define OFF_BMP(N) status_hotend_b_bmp + #define ON_BMP(N) status_hotend_a_bmp + #elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS) + #define OFF_BMP(N) status_hotend_a_bmp + #define ON_BMP(N) status_hotend_b_bmp + #elif ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED) + #define OFF_BMP(N) status_hotend##N##_b_bmp + #define ON_BMP(N) status_hotend##N##_a_bmp + #else + #define OFF_BMP(N) status_hotend##N##_a_bmp + #define ON_BMP(N) status_hotend##N##_b_bmp + #endif + + #if STATUS_HOTEND_BITMAPS > 1 + static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6)); + #if ANIM_HOTEND + static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6)); + #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)]) + #else + #define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)]) + #endif + #elif ANIM_HOTEND + #define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP()) + #else + #define HOTEND_BITMAP(N,S) status_hotend_a_bmp + #endif + + if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { + + #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) + + const float prop = target - 20, + perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; + uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); + NOMORE(tall, BAR_TALL); + + #if ANIM_HOTEND + // Draw hotend bitmap, either whole or split by the heating percent const uint8_t hx = STATUS_HOTEND_X(heater), bw = STATUS_HOTEND_BYTEWIDTH(heater); #if ENABLED(STATUS_HEAT_PERCENT) @@ -215,79 +182,129 @@ FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const bool blin else #endif u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater, isHeat)); - } - #endif - - // Draw a heating progress bar, if specified - #if DO_DRAW_BED && ENABLED(STATUS_HEAT_PERCENT) - - if (IFBED(true, STATIC_HOTEND) && isHeat) { - const uint8_t bx = IFBED(STATUS_BED_X + STATUS_BED_WIDTH - 1, STATUS_HOTEND_X(heater) + STATUS_HOTEND_WIDTH(heater)) + 1; - u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT); - if (tall) { - const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; - if (PAGE_OVER(STATUS_HEATERS_Y + ph)) - u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall); - } - } - - #endif - - } // PAGE_CONTAINS - - if (PAGE_UNDER(7)) { - #if HEATER_IDLE_HANDLER - const bool is_idle = IFBED(thermalManager.bed_idle.timed_out, thermalManager.hotend_idle[heater].timed_out), - dodraw = (blink || !is_idle); - #else - constexpr bool dodraw = true; - #endif - if (dodraw) _draw_centered_temp(target + 0.5, tx, 7); - } - - if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) - _draw_centered_temp(temp + 0.5f, tx, 28); - - if (IFBED(STATIC_BED && BED_DOT, STATIC_HOTEND && HOTEND_DOT) && PAGE_CONTAINS(17, 19)) { - u8g.setColorIndex(0); // set to white on black - u8g.drawBox(tx, IFBED(20-2, 20-3), 2, 2); - u8g.setColorIndex(1); // restore black on white - } - -} - -#if DO_DRAW_CHAMBER - - FORCE_INLINE void _draw_chamber_status(const bool blink) { - #if ENABLED(MARLIN_DEV_MODE) - const float temp = 10 + (millis() >> 8) % CHAMBER_MAXTEMP, - target = CHAMBER_MAXTEMP; - #else - const float temp = thermalManager.degChamber(); - #if HAS_HEATED_CHAMBER - const float target = thermalManager.degTargetChamber(); #endif - #endif - #if !HEATER_IDLE_HANDLER - UNUSED(blink); - #endif + // Draw a heating progress bar, if specified + #if DO_DRAW_BED && ENABLED(STATUS_HEAT_PERCENT) + + if (STATIC_HOTEND && isHeat) { + const uint8_t bx = STATUS_HOTEND_X(heater) + STATUS_HOTEND_WIDTH(heater) + 1; + u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT); + if (tall) { + const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; + if (PAGE_OVER(STATUS_HEATERS_Y + ph)) + u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall); + } + } + + #endif + + } // PAGE_CONTAINS if (PAGE_UNDER(7)) { #if HEATER_IDLE_HANDLER - const bool is_idle = false, // thermalManager.chamber_idle.timed_out, + const bool is_idle = thermalManager.hotend_idle[heater].timed_out, dodraw = (blink || !is_idle); #else constexpr bool dodraw = true; #endif - #if HAS_HEATED_CHAMBER - if (dodraw) _draw_centered_temp(target + 0.5, STATUS_CHAMBER_TEXT_X, 7); - #else - UNUSED(dodraw); - #endif + if (dodraw) _draw_centered_temp(target + 0.5, tx, 7); } + if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) - _draw_centered_temp(temp + 0.5f, STATUS_CHAMBER_TEXT_X, 28); + _draw_centered_temp(temp + 0.5f, tx, 28); + + if (STATIC_HOTEND && HOTEND_DOT && PAGE_CONTAINS(17, 19)) { + u8g.setColorIndex(0); // set to white on black + u8g.drawBox(tx, 20 - 3, 2, 2); + u8g.setColorIndex(1); // restore black on white + } + + } + +#endif // HOTENDS + +#if DO_DRAW_BED + + FORCE_INLINE void _draw_bed_status(const bool blink) { + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #endif + + const bool isHeat = BED_ALT(); + + const uint8_t tx = STATUS_BED_TEXT_X; + + const float temp = thermalManager.degBed(), + target = thermalManager.degTargetBed(); + + #if DO_DRAW_BED && DISABLED(STATUS_BED_ANIM) + #define STATIC_BED true + #define BED_DOT isHeat + #else + #define STATIC_BED false + #define BED_DOT false + #endif + + if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { + + #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) + + const float prop = target - 20, + perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; + uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); + NOMORE(tall, BAR_TALL); + + // Draw a heating progress bar, if specified + #if ENABLED(STATUS_HEAT_PERCENT) + + if (isHeat) { + const uint8_t bx = STATUS_BED_X + STATUS_BED_WIDTH; + u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT); + if (tall) { + const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; + if (PAGE_OVER(STATUS_HEATERS_Y + ph)) + u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall); + } + } + + #endif + + } // PAGE_CONTAINS + + if (PAGE_UNDER(7)) { + #if HEATER_IDLE_HANDLER + const bool is_idle = thermalManager.bed_idle.timed_out, + dodraw = (blink || !is_idle); + #else + constexpr bool dodraw = true; + #endif + if (dodraw) _draw_centered_temp(target + 0.5, tx, 7); + } + + if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) + _draw_centered_temp(temp + 0.5f, tx, 28); + + if (STATIC_BED && BED_DOT && PAGE_CONTAINS(17, 19)) { + u8g.setColorIndex(0); // set to white on black + u8g.drawBox(tx, 20 - 2, 2, 2); + u8g.setColorIndex(1); // restore black on white + } + + } + +#endif // DO_DRAW_BED + +#if DO_DRAW_CHAMBER + + FORCE_INLINE void _draw_chamber_status() { + #if HAS_HEATED_CHAMBER + if (PAGE_UNDER(7)) + _draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7); + #endif + + if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1)) + _draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28); } #endif // DO_DRAW_CHAMBER @@ -323,17 +340,8 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const } } -#if ENABLED(MARLIN_DEV_MODE) - uint16_t count_renders = 0; - uint32_t total_cycles = 0; -#endif - void MarlinUI::draw_status_screen() { - #if ENABLED(MARLIN_DEV_MODE) - if (first_page) count_renders++; - #endif - static char xstring[5 #if ENABLED(LCD_SHOW_E_TOTAL) + 7 @@ -378,13 +386,13 @@ void MarlinUI::draw_status_screen() { #if ANIM_HBC uint8_t new_bits = 0; #if ANIM_HOTEND - HOTEND_LOOP() if (thermalManager.isHeatingHotend(e) ^ SHOW_ON_STATE) SBI(new_bits, e); + HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, e); #endif #if ANIM_BED - if (thermalManager.isHeatingBed() ^ SHOW_ON_STATE) SBI(new_bits, 7); + if (thermalManager.isHeatingBed()) SBI(new_bits, 7); #endif #if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER - if (thermalManager.isHeatingChamber() ^ SHOW_ON_STATE) SBI(new_bits, 6); + if (thermalManager.isHeatingChamber()) SBI(new_bits, 6); #endif heat_bits = new_bits; #endif @@ -486,10 +494,6 @@ void MarlinUI::draw_status_screen() { // Status Menu Font set_font(FONT_STATUSMENU); - #if ENABLED(MARLIN_DEV_MODE) - TCNT5 = 0; - #endif - #if DO_DRAW_LOGO if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1)) u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp); @@ -556,16 +560,16 @@ void MarlinUI::draw_status_screen() { // Extruders #if HOTENDS for (uint8_t e = 0; e < MAX_HOTEND_DRAW; ++e) - _draw_heater_status((heater_ind_t)e, blink); + _draw_hotend_status((heater_ind_t)e, blink); #endif // Heated bed #if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) || (HAS_HEATED_BED && ENABLED(STATUS_COMBINE_HEATERS) && HOTENDS <= 4) - _draw_heater_status(H_BED, blink); + _draw_bed_status(blink); #endif #if DO_DRAW_CHAMBER - _draw_chamber_status(blink); + _draw_chamber_status(); #endif // Fan, if a bitmap was provided @@ -587,10 +591,6 @@ void MarlinUI::draw_status_screen() { #endif } - #if ENABLED(MARLIN_DEV_MODE) - total_cycles += TCNT5; - #endif - #if ENABLED(SDSUPPORT) // // SD Card Symbol @@ -795,17 +795,6 @@ void MarlinUI::draw_status_screen() { void MarlinUI::draw_status_message(const bool blink) { - #if ENABLED(MARLIN_DEV_MODE) - if (PAGE_CONTAINS(64-8, 64-1)) { - lcd_put_int(total_cycles); - lcd_put_wchar('/'); - lcd_put_int(count_renders); - lcd_put_wchar('='); - lcd_put_int(int(total_cycles / count_renders)); - return; - } - #endif - // Get the UTF8 character count of the string uint8_t slen = utf8_strlen(status_message);