Split up hotend / bed drawing
This commit is contained in:
Scott Lahteine
parent
849ac80e90
commit
3dc49fd1c6
|
|
@ -1462,7 +1462,8 @@
|
||||||
|
|
||||||
#else // HOTENDS == 0
|
#else // HOTENDS == 0
|
||||||
|
|
||||||
//#error "Incomplete status header"
|
#define STATUS_HOTEND_TEXT_X(N) 0
|
||||||
|
#define STATUS_HEATERS_Y 0
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -64,6 +64,7 @@
|
||||||
#define STATUS_BASELINE (LCD_PIXEL_HEIGHT - INFO_FONT_DESCENT)
|
#define STATUS_BASELINE (LCD_PIXEL_HEIGHT - INFO_FONT_DESCENT)
|
||||||
|
|
||||||
#define DO_DRAW_LOGO (STATUS_LOGO_WIDTH && ENABLED(CUSTOM_STATUS_SCREEN_IMAGE))
|
#define DO_DRAW_LOGO (STATUS_LOGO_WIDTH && ENABLED(CUSTOM_STATUS_SCREEN_IMAGE))
|
||||||
|
#define DO_DRAW_HOTENDS (HOTENDS > 0)
|
||||||
#define DO_DRAW_BED (HAS_HEATED_BED && STATUS_BED_WIDTH && HOTENDS <= 4)
|
#define DO_DRAW_BED (HAS_HEATED_BED && STATUS_BED_WIDTH && HOTENDS <= 4)
|
||||||
#define DO_DRAW_CHAMBER (HAS_TEMP_CHAMBER && STATUS_CHAMBER_WIDTH && HOTENDS <= 4)
|
#define DO_DRAW_CHAMBER (HAS_TEMP_CHAMBER && STATUS_CHAMBER_WIDTH && HOTENDS <= 4)
|
||||||
#define DO_DRAW_FAN (HAS_FAN0 && STATUS_FAN_WIDTH && HOTENDS <= 4 && defined(STATUS_FAN_FRAMES))
|
#define DO_DRAW_FAN (HAS_FAN0 && STATUS_FAN_WIDTH && HOTENDS <= 4 && defined(STATUS_FAN_FRAMES))
|
||||||
|
|
@ -102,12 +103,6 @@
|
||||||
#define PROGRESS_BAR_X 54
|
#define PROGRESS_BAR_X 54
|
||||||
#define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
|
#define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
#define SHOW_ON_STATE READ(X_MIN_PIN)
|
|
||||||
#else
|
|
||||||
#define SHOW_ON_STATE false
|
|
||||||
#endif
|
|
||||||
|
|
||||||
FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) {
|
FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, const uint8_t ty) {
|
||||||
const char *str = i16tostr3(temp);
|
const char *str = i16tostr3(temp);
|
||||||
const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1;
|
const uint8_t len = str[0] != ' ' ? 3 : str[1] != ' ' ? 2 : 1;
|
||||||
|
|
@ -115,95 +110,67 @@ FORCE_INLINE void _draw_centered_temp(const int16_t temp, const uint8_t tx, cons
|
||||||
lcd_put_wchar(LCD_STR_DEGREE[0]);
|
lcd_put_wchar(LCD_STR_DEGREE[0]);
|
||||||
}
|
}
|
||||||
|
|
||||||
FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const bool blink) {
|
#if DO_DRAW_HOTENDS
|
||||||
#if !HEATER_IDLE_HANDLER
|
|
||||||
UNUSED(blink);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) || (HAS_HEATED_BED && ENABLED(STATUS_COMBINE_HEATERS) && HOTENDS <= 4)
|
FORCE_INLINE void _draw_hotend_status(const heater_ind_t heater, const bool blink) {
|
||||||
const bool isBed = heater < 0;
|
#if !HEATER_IDLE_HANDLER
|
||||||
#define IFBED(A,B) (isBed ? (A) : (B))
|
UNUSED(blink);
|
||||||
#else
|
|
||||||
#define IFBED(A,B) (B)
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
constexpr bool isHeat = true;
|
|
||||||
#else
|
|
||||||
const bool isHeat = IFBED(BED_ALT(), HOTEND_ALT(heater));
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef STATUS_HOTEND_TEXT_X
|
|
||||||
#define STATUS_HOTEND_TEXT_X(N) 0
|
|
||||||
#define STATUS_HEATERS_Y 0
|
|
||||||
#endif
|
|
||||||
|
|
||||||
const uint8_t tx = IFBED(STATUS_BED_TEXT_X, STATUS_HOTEND_TEXT_X(heater));
|
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
const float temp = 20 + (millis() >> 8) % IFBED(100, 200),
|
|
||||||
target = IFBED(100, 200);
|
|
||||||
#else
|
|
||||||
const float temp = IFBED(thermalManager.degBed(), thermalManager.degHotend(heater)),
|
|
||||||
target = IFBED(thermalManager.degTargetBed(), thermalManager.degTargetHotend(heater));
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if DISABLED(STATUS_HOTEND_ANIM)
|
|
||||||
#define STATIC_HOTEND true
|
|
||||||
#define HOTEND_DOT isHeat
|
|
||||||
#else
|
|
||||||
#define STATIC_HOTEND false
|
|
||||||
#define HOTEND_DOT false
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if DO_DRAW_BED && DISABLED(STATUS_BED_ANIM)
|
|
||||||
#define STATIC_BED true
|
|
||||||
#define BED_DOT isHeat
|
|
||||||
#else
|
|
||||||
#define STATIC_BED false
|
|
||||||
#define BED_DOT false
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS)
|
|
||||||
#define OFF_BMP(N) status_hotend_b_bmp
|
|
||||||
#define ON_BMP(N) status_hotend_a_bmp
|
|
||||||
#elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS)
|
|
||||||
#define OFF_BMP(N) status_hotend_a_bmp
|
|
||||||
#define ON_BMP(N) status_hotend_b_bmp
|
|
||||||
#elif ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED)
|
|
||||||
#define OFF_BMP(N) status_hotend##N##_b_bmp
|
|
||||||
#define ON_BMP(N) status_hotend##N##_a_bmp
|
|
||||||
#else
|
|
||||||
#define OFF_BMP(N) status_hotend##N##_a_bmp
|
|
||||||
#define ON_BMP(N) status_hotend##N##_b_bmp
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if STATUS_HOTEND_BITMAPS > 1
|
|
||||||
static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6));
|
|
||||||
#if ANIM_HOTEND
|
|
||||||
static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6));
|
|
||||||
#define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
|
|
||||||
#else
|
|
||||||
#define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
|
|
||||||
#endif
|
#endif
|
||||||
#elif ANIM_HOTEND
|
|
||||||
#define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP())
|
|
||||||
#else
|
|
||||||
#define HOTEND_BITMAP(N,S) status_hotend_a_bmp
|
|
||||||
#endif
|
|
||||||
|
|
||||||
if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
|
const bool isHeat = HOTEND_ALT(heater);
|
||||||
|
|
||||||
#define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
|
const uint8_t tx = STATUS_HOTEND_TEXT_X(heater);
|
||||||
|
|
||||||
const float prop = target - 20,
|
const float temp = thermalManager.degHotend(heater),
|
||||||
perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
|
target = thermalManager.degTargetHotend(heater);
|
||||||
uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
|
|
||||||
NOMORE(tall, BAR_TALL);
|
|
||||||
|
|
||||||
#if ANIM_HOTEND
|
#if DISABLED(STATUS_HOTEND_ANIM)
|
||||||
// Draw hotend bitmap, either whole or split by the heating percent
|
#define STATIC_HOTEND true
|
||||||
if (IFBED(0, 1)) {
|
#define HOTEND_DOT isHeat
|
||||||
|
#else
|
||||||
|
#define STATIC_HOTEND false
|
||||||
|
#define HOTEND_DOT false
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ANIM_HOTEND && BOTH(STATUS_HOTEND_INVERTED, STATUS_HOTEND_NUMBERLESS)
|
||||||
|
#define OFF_BMP(N) status_hotend_b_bmp
|
||||||
|
#define ON_BMP(N) status_hotend_a_bmp
|
||||||
|
#elif ANIM_HOTEND && DISABLED(STATUS_HOTEND_INVERTED) && ENABLED(STATUS_HOTEND_NUMBERLESS)
|
||||||
|
#define OFF_BMP(N) status_hotend_a_bmp
|
||||||
|
#define ON_BMP(N) status_hotend_b_bmp
|
||||||
|
#elif ANIM_HOTEND && ENABLED(STATUS_HOTEND_INVERTED)
|
||||||
|
#define OFF_BMP(N) status_hotend##N##_b_bmp
|
||||||
|
#define ON_BMP(N) status_hotend##N##_a_bmp
|
||||||
|
#else
|
||||||
|
#define OFF_BMP(N) status_hotend##N##_a_bmp
|
||||||
|
#define ON_BMP(N) status_hotend##N##_b_bmp
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if STATUS_HOTEND_BITMAPS > 1
|
||||||
|
static const unsigned char* const status_hotend_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, OFF_BMP(1), OFF_BMP(2), OFF_BMP(3), OFF_BMP(4), OFF_BMP(5), OFF_BMP(6));
|
||||||
|
#if ANIM_HOTEND
|
||||||
|
static const unsigned char* const status_hotend_on_gfx[STATUS_HOTEND_BITMAPS] PROGMEM = ARRAY_N(STATUS_HOTEND_BITMAPS, ON_BMP(1), ON_BMP(2), ON_BMP(3), ON_BMP(4), ON_BMP(5), ON_BMP(6));
|
||||||
|
#define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr((S) ? &status_hotend_on_gfx[(N) % (STATUS_HOTEND_BITMAPS)] : &status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
|
||||||
|
#else
|
||||||
|
#define HOTEND_BITMAP(N,S) (unsigned char*)pgm_read_ptr(&status_hotend_gfx[(N) % (STATUS_HOTEND_BITMAPS)])
|
||||||
|
#endif
|
||||||
|
#elif ANIM_HOTEND
|
||||||
|
#define HOTEND_BITMAP(N,S) ((S) ? ON_BMP() : OFF_BMP())
|
||||||
|
#else
|
||||||
|
#define HOTEND_BITMAP(N,S) status_hotend_a_bmp
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
|
||||||
|
|
||||||
|
#define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
|
||||||
|
|
||||||
|
const float prop = target - 20,
|
||||||
|
perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
|
||||||
|
uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
|
||||||
|
NOMORE(tall, BAR_TALL);
|
||||||
|
|
||||||
|
#if ANIM_HOTEND
|
||||||
|
// Draw hotend bitmap, either whole or split by the heating percent
|
||||||
const uint8_t hx = STATUS_HOTEND_X(heater),
|
const uint8_t hx = STATUS_HOTEND_X(heater),
|
||||||
bw = STATUS_HOTEND_BYTEWIDTH(heater);
|
bw = STATUS_HOTEND_BYTEWIDTH(heater);
|
||||||
#if ENABLED(STATUS_HEAT_PERCENT)
|
#if ENABLED(STATUS_HEAT_PERCENT)
|
||||||
|
|
@ -215,79 +182,129 @@ FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const bool blin
|
||||||
else
|
else
|
||||||
#endif
|
#endif
|
||||||
u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater, isHeat));
|
u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(heater, isHeat));
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Draw a heating progress bar, if specified
|
|
||||||
#if DO_DRAW_BED && ENABLED(STATUS_HEAT_PERCENT)
|
|
||||||
|
|
||||||
if (IFBED(true, STATIC_HOTEND) && isHeat) {
|
|
||||||
const uint8_t bx = IFBED(STATUS_BED_X + STATUS_BED_WIDTH - 1, STATUS_HOTEND_X(heater) + STATUS_HOTEND_WIDTH(heater)) + 1;
|
|
||||||
u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT);
|
|
||||||
if (tall) {
|
|
||||||
const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
|
|
||||||
if (PAGE_OVER(STATUS_HEATERS_Y + ph))
|
|
||||||
u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
} // PAGE_CONTAINS
|
|
||||||
|
|
||||||
if (PAGE_UNDER(7)) {
|
|
||||||
#if HEATER_IDLE_HANDLER
|
|
||||||
const bool is_idle = IFBED(thermalManager.bed_idle.timed_out, thermalManager.hotend_idle[heater].timed_out),
|
|
||||||
dodraw = (blink || !is_idle);
|
|
||||||
#else
|
|
||||||
constexpr bool dodraw = true;
|
|
||||||
#endif
|
|
||||||
if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
|
|
||||||
}
|
|
||||||
|
|
||||||
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
|
||||||
_draw_centered_temp(temp + 0.5f, tx, 28);
|
|
||||||
|
|
||||||
if (IFBED(STATIC_BED && BED_DOT, STATIC_HOTEND && HOTEND_DOT) && PAGE_CONTAINS(17, 19)) {
|
|
||||||
u8g.setColorIndex(0); // set to white on black
|
|
||||||
u8g.drawBox(tx, IFBED(20-2, 20-3), 2, 2);
|
|
||||||
u8g.setColorIndex(1); // restore black on white
|
|
||||||
}
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
#if DO_DRAW_CHAMBER
|
|
||||||
|
|
||||||
FORCE_INLINE void _draw_chamber_status(const bool blink) {
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
const float temp = 10 + (millis() >> 8) % CHAMBER_MAXTEMP,
|
|
||||||
target = CHAMBER_MAXTEMP;
|
|
||||||
#else
|
|
||||||
const float temp = thermalManager.degChamber();
|
|
||||||
#if HAS_HEATED_CHAMBER
|
|
||||||
const float target = thermalManager.degTargetChamber();
|
|
||||||
#endif
|
#endif
|
||||||
#endif
|
|
||||||
|
|
||||||
#if !HEATER_IDLE_HANDLER
|
// Draw a heating progress bar, if specified
|
||||||
UNUSED(blink);
|
#if DO_DRAW_BED && ENABLED(STATUS_HEAT_PERCENT)
|
||||||
#endif
|
|
||||||
|
if (STATIC_HOTEND && isHeat) {
|
||||||
|
const uint8_t bx = STATUS_HOTEND_X(heater) + STATUS_HOTEND_WIDTH(heater) + 1;
|
||||||
|
u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT);
|
||||||
|
if (tall) {
|
||||||
|
const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
|
||||||
|
if (PAGE_OVER(STATUS_HEATERS_Y + ph))
|
||||||
|
u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
} // PAGE_CONTAINS
|
||||||
|
|
||||||
if (PAGE_UNDER(7)) {
|
if (PAGE_UNDER(7)) {
|
||||||
#if HEATER_IDLE_HANDLER
|
#if HEATER_IDLE_HANDLER
|
||||||
const bool is_idle = false, // thermalManager.chamber_idle.timed_out,
|
const bool is_idle = thermalManager.hotend_idle[heater].timed_out,
|
||||||
dodraw = (blink || !is_idle);
|
dodraw = (blink || !is_idle);
|
||||||
#else
|
#else
|
||||||
constexpr bool dodraw = true;
|
constexpr bool dodraw = true;
|
||||||
#endif
|
#endif
|
||||||
#if HAS_HEATED_CHAMBER
|
if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
|
||||||
if (dodraw) _draw_centered_temp(target + 0.5, STATUS_CHAMBER_TEXT_X, 7);
|
|
||||||
#else
|
|
||||||
UNUSED(dodraw);
|
|
||||||
#endif
|
|
||||||
}
|
}
|
||||||
|
|
||||||
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
||||||
_draw_centered_temp(temp + 0.5f, STATUS_CHAMBER_TEXT_X, 28);
|
_draw_centered_temp(temp + 0.5f, tx, 28);
|
||||||
|
|
||||||
|
if (STATIC_HOTEND && HOTEND_DOT && PAGE_CONTAINS(17, 19)) {
|
||||||
|
u8g.setColorIndex(0); // set to white on black
|
||||||
|
u8g.drawBox(tx, 20 - 3, 2, 2);
|
||||||
|
u8g.setColorIndex(1); // restore black on white
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // HOTENDS
|
||||||
|
|
||||||
|
#if DO_DRAW_BED
|
||||||
|
|
||||||
|
FORCE_INLINE void _draw_bed_status(const bool blink) {
|
||||||
|
#if !HEATER_IDLE_HANDLER
|
||||||
|
UNUSED(blink);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
const bool isHeat = BED_ALT();
|
||||||
|
|
||||||
|
const uint8_t tx = STATUS_BED_TEXT_X;
|
||||||
|
|
||||||
|
const float temp = thermalManager.degBed(),
|
||||||
|
target = thermalManager.degTargetBed();
|
||||||
|
|
||||||
|
#if DO_DRAW_BED && DISABLED(STATUS_BED_ANIM)
|
||||||
|
#define STATIC_BED true
|
||||||
|
#define BED_DOT isHeat
|
||||||
|
#else
|
||||||
|
#define STATIC_BED false
|
||||||
|
#define BED_DOT false
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) {
|
||||||
|
|
||||||
|
#define BAR_TALL (STATUS_HEATERS_HEIGHT - 2)
|
||||||
|
|
||||||
|
const float prop = target - 20,
|
||||||
|
perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0;
|
||||||
|
uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f);
|
||||||
|
NOMORE(tall, BAR_TALL);
|
||||||
|
|
||||||
|
// Draw a heating progress bar, if specified
|
||||||
|
#if ENABLED(STATUS_HEAT_PERCENT)
|
||||||
|
|
||||||
|
if (isHeat) {
|
||||||
|
const uint8_t bx = STATUS_BED_X + STATUS_BED_WIDTH;
|
||||||
|
u8g.drawFrame(bx, STATUS_HEATERS_Y, 3, STATUS_HEATERS_HEIGHT);
|
||||||
|
if (tall) {
|
||||||
|
const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall;
|
||||||
|
if (PAGE_OVER(STATUS_HEATERS_Y + ph))
|
||||||
|
u8g.drawVLine(bx + 1, STATUS_HEATERS_Y + ph, tall);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
} // PAGE_CONTAINS
|
||||||
|
|
||||||
|
if (PAGE_UNDER(7)) {
|
||||||
|
#if HEATER_IDLE_HANDLER
|
||||||
|
const bool is_idle = thermalManager.bed_idle.timed_out,
|
||||||
|
dodraw = (blink || !is_idle);
|
||||||
|
#else
|
||||||
|
constexpr bool dodraw = true;
|
||||||
|
#endif
|
||||||
|
if (dodraw) _draw_centered_temp(target + 0.5, tx, 7);
|
||||||
|
}
|
||||||
|
|
||||||
|
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
||||||
|
_draw_centered_temp(temp + 0.5f, tx, 28);
|
||||||
|
|
||||||
|
if (STATIC_BED && BED_DOT && PAGE_CONTAINS(17, 19)) {
|
||||||
|
u8g.setColorIndex(0); // set to white on black
|
||||||
|
u8g.drawBox(tx, 20 - 2, 2, 2);
|
||||||
|
u8g.setColorIndex(1); // restore black on white
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif // DO_DRAW_BED
|
||||||
|
|
||||||
|
#if DO_DRAW_CHAMBER
|
||||||
|
|
||||||
|
FORCE_INLINE void _draw_chamber_status() {
|
||||||
|
#if HAS_HEATED_CHAMBER
|
||||||
|
if (PAGE_UNDER(7))
|
||||||
|
_draw_centered_temp(thermalManager.degTargetChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 7);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if (PAGE_CONTAINS(28 - INFO_FONT_ASCENT, 28 - 1))
|
||||||
|
_draw_centered_temp(thermalManager.degChamber() + 0.5f, STATUS_CHAMBER_TEXT_X, 28);
|
||||||
}
|
}
|
||||||
|
|
||||||
#endif // DO_DRAW_CHAMBER
|
#endif // DO_DRAW_CHAMBER
|
||||||
|
|
@ -323,17 +340,8 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
uint16_t count_renders = 0;
|
|
||||||
uint32_t total_cycles = 0;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
void MarlinUI::draw_status_screen() {
|
void MarlinUI::draw_status_screen() {
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
if (first_page) count_renders++;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
static char xstring[5
|
static char xstring[5
|
||||||
#if ENABLED(LCD_SHOW_E_TOTAL)
|
#if ENABLED(LCD_SHOW_E_TOTAL)
|
||||||
+ 7
|
+ 7
|
||||||
|
|
@ -378,13 +386,13 @@ void MarlinUI::draw_status_screen() {
|
||||||
#if ANIM_HBC
|
#if ANIM_HBC
|
||||||
uint8_t new_bits = 0;
|
uint8_t new_bits = 0;
|
||||||
#if ANIM_HOTEND
|
#if ANIM_HOTEND
|
||||||
HOTEND_LOOP() if (thermalManager.isHeatingHotend(e) ^ SHOW_ON_STATE) SBI(new_bits, e);
|
HOTEND_LOOP() if (thermalManager.isHeatingHotend(e)) SBI(new_bits, e);
|
||||||
#endif
|
#endif
|
||||||
#if ANIM_BED
|
#if ANIM_BED
|
||||||
if (thermalManager.isHeatingBed() ^ SHOW_ON_STATE) SBI(new_bits, 7);
|
if (thermalManager.isHeatingBed()) SBI(new_bits, 7);
|
||||||
#endif
|
#endif
|
||||||
#if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER
|
#if DO_DRAW_CHAMBER && HAS_HEATED_CHAMBER
|
||||||
if (thermalManager.isHeatingChamber() ^ SHOW_ON_STATE) SBI(new_bits, 6);
|
if (thermalManager.isHeatingChamber()) SBI(new_bits, 6);
|
||||||
#endif
|
#endif
|
||||||
heat_bits = new_bits;
|
heat_bits = new_bits;
|
||||||
#endif
|
#endif
|
||||||
|
|
@ -486,10 +494,6 @@ void MarlinUI::draw_status_screen() {
|
||||||
// Status Menu Font
|
// Status Menu Font
|
||||||
set_font(FONT_STATUSMENU);
|
set_font(FONT_STATUSMENU);
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
TCNT5 = 0;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if DO_DRAW_LOGO
|
#if DO_DRAW_LOGO
|
||||||
if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1))
|
if (PAGE_CONTAINS(STATUS_LOGO_Y, STATUS_LOGO_Y + STATUS_LOGO_HEIGHT - 1))
|
||||||
u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp);
|
u8g.drawBitmapP(STATUS_LOGO_X, STATUS_LOGO_Y, STATUS_LOGO_BYTEWIDTH, STATUS_LOGO_HEIGHT, status_logo_bmp);
|
||||||
|
|
@ -556,16 +560,16 @@ void MarlinUI::draw_status_screen() {
|
||||||
// Extruders
|
// Extruders
|
||||||
#if HOTENDS
|
#if HOTENDS
|
||||||
for (uint8_t e = 0; e < MAX_HOTEND_DRAW; ++e)
|
for (uint8_t e = 0; e < MAX_HOTEND_DRAW; ++e)
|
||||||
_draw_heater_status((heater_ind_t)e, blink);
|
_draw_hotend_status((heater_ind_t)e, blink);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Heated bed
|
// Heated bed
|
||||||
#if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) || (HAS_HEATED_BED && ENABLED(STATUS_COMBINE_HEATERS) && HOTENDS <= 4)
|
#if DO_DRAW_BED && DISABLED(STATUS_COMBINE_HEATERS) || (HAS_HEATED_BED && ENABLED(STATUS_COMBINE_HEATERS) && HOTENDS <= 4)
|
||||||
_draw_heater_status(H_BED, blink);
|
_draw_bed_status(blink);
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#if DO_DRAW_CHAMBER
|
#if DO_DRAW_CHAMBER
|
||||||
_draw_chamber_status(blink);
|
_draw_chamber_status();
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
// Fan, if a bitmap was provided
|
// Fan, if a bitmap was provided
|
||||||
|
|
@ -587,10 +591,6 @@ void MarlinUI::draw_status_screen() {
|
||||||
#endif
|
#endif
|
||||||
}
|
}
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
total_cycles += TCNT5;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if ENABLED(SDSUPPORT)
|
#if ENABLED(SDSUPPORT)
|
||||||
//
|
//
|
||||||
// SD Card Symbol
|
// SD Card Symbol
|
||||||
|
|
@ -795,17 +795,6 @@ void MarlinUI::draw_status_screen() {
|
||||||
|
|
||||||
void MarlinUI::draw_status_message(const bool blink) {
|
void MarlinUI::draw_status_message(const bool blink) {
|
||||||
|
|
||||||
#if ENABLED(MARLIN_DEV_MODE)
|
|
||||||
if (PAGE_CONTAINS(64-8, 64-1)) {
|
|
||||||
lcd_put_int(total_cycles);
|
|
||||||
lcd_put_wchar('/');
|
|
||||||
lcd_put_int(count_renders);
|
|
||||||
lcd_put_wchar('=');
|
|
||||||
lcd_put_int(int(total_cycles / count_renders));
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
// Get the UTF8 character count of the string
|
// Get the UTF8 character count of the string
|
||||||
uint8_t slen = utf8_strlen(status_message);
|
uint8_t slen = utf8_strlen(status_message);
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in a new issue