zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

EXTUI and UBL compilation fixes (#13420)

Browse source
This commit is contained in:
InsanityAutomation 2019-03-17 08:57:54 -04:00 committed by Scott Lahteine
parent b376c7e374
commit 3fb8489ae3
58 changed files with 239 additions and 58 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
Marlin/src/feature/bedlevel/ubl/ubl.cpp
View file

@ -32,6 +32,10 @@
#include "../../../module/motion.h"
#include "../../bedlevel/bedlevel.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../../../lcd/extensible_ui/ui_api.h"
#endif
#include "math.h"
void unified_bed_leveling::echo_name() {

9
Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
View file

@ -49,6 +49,10 @@
#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
#include "../../../core/debug_out.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../../../lcd/extensible_ui/ui_api.h"
#endif
#include <math.h>
#define UBL_G29_P31
@ -389,12 +393,13 @@
case 2:
// Allow the user to specify the height because 10mm is a little extreme in some cases.
for (uint8_t x = (GRID_MAX_POINTS_X) / 3; x < 2 * (GRID_MAX_POINTS_X) / 3; x++) // Create a rectangular raised area in
for (uint8_t y = (GRID_MAX_POINTS_Y) / 3; y < 2 * (GRID_MAX_POINTS_Y) / 3; y++) // the center of the bed
for (uint8_t x = (GRID_MAX_POINTS_X) / 3; x < 2 * (GRID_MAX_POINTS_X) / 3; x++) // Create a rectangular raised area in
for (uint8_t y = (GRID_MAX_POINTS_Y) / 3; y < 2 * (GRID_MAX_POINTS_Y) / 3; y++) { // the center of the bed
z_values[x][y] += parser.seen('C') ? g29_constant : 9.99f;
#if ENABLED(EXTENSIBLE_UI)
ExtUI::onMeshUpdate(x, y, z_values[x][y]);
#endif
}
break;
}
}

4
Marlin/src/gcode/bedlevel/ubl/M421.cpp
View file

@ -31,6 +31,10 @@
#include "../../gcode.h"
#include "../../../feature/bedlevel/bedlevel.h"
#if ENABLED(EXTENSIBLE_UI)
#include "../../../lcd/extensible_ui/ui_api.h"
#endif
/**
* M421: Set a single Mesh Bed Leveling Z coordinate
*

10
Marlin/src/lcd/extensible_ui/ui_api.cpp
View file

@ -87,6 +87,10 @@
#endif
#endif
#if HAS_LEVELING
#include "../../feature/bedlevel.h"
#endif
#if HAS_FILAMENT_SENSOR
#include "../../feature/runout.h"
#endif
@ -417,7 +421,9 @@ namespace ExtUI {
void setJunctionDeviation_mm(const float value) {
planner.junction_deviation_mm = clamp(value, 0.01, 0.3);
planner.recalculate_max_e_jerk();
#if ENABLED(LIN_ADVANCE)
planner.recalculate_max_e_jerk();
#endif
}
#else
@ -579,7 +585,7 @@ namespace ExtUI {
#if HAS_LEVELING
bool getLevelingActive() { return planner.leveling_active; }
void setLevelingActive(const bool state) { set_bed_leveling_enabled(state) }
void setLevelingActive(const bool state) { set_bed_leveling_enabled(state); }
#if HAS_MESH
bool getMeshValid() { return leveling_is_valid(); }
bed_mesh_t getMeshArray() { return Z_VALUES; }

5
config/default/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Anet/A2/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Anet/A2plus/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Anet/A6/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Anet/A8/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/AnyCubic/i3/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/ArmEd/Configuration_adv.h
View file

@ -517,8 +517,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/BIBO/TouchX/default/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Cartesio/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Creality/CR-10/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Creality/CR-10S/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Creality/CR-10_5S/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Creality/CR-10mini/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Creality/CR-8/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Creality/Ender-4/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Einstart-S/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Felix/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Formbot/Raptor/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View file

@ -517,8 +517,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View file

@ -517,8 +517,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Geeetech/A10M/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Geeetech/A20M/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Infitary/i3-M508/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/MakerParts/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Malyan/M150/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Malyan/M200/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Mks/Robin/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Mks/Sbase/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/RapideLite/RL200/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/RigidBot/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Sanguinololu/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/TheBorg/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/TinyBoy2/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Tronxy/X3A/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Tronxy/X5S-2E/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/UltiMachine/Archim1/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/UltiMachine/Archim2/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/VORONDesign/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Velleman/K8200/Configuration_adv.h
View file

@ -526,8 +526,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/Velleman/K8400/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/WASP/PowerWASP/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/gCreate/gMax1.5+/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/makibox/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/tvrrug/Round2/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif

5
config/examples/wt150/Configuration_adv.h
View file

@ -513,8 +513,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif