diff --git a/Marlin/language_pl.h b/Marlin/language_pl.h index 798c15440f..39cef81f94 100644 --- a/Marlin/language_pl.h +++ b/Marlin/language_pl.h @@ -40,6 +40,9 @@ #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Wylacz silniki" #define MSG_AUTO_HOME "Pozycja zerowa" +#define MSG_AUTO_HOME_X "Home X" +#define MSG_AUTO_HOME_Y "Home Y" +#define MSG_AUTO_HOME_Z "Home Z" #define MSG_LEVEL_BED_HOMING "Pozycja zerowa" #define MSG_LEVEL_BED_WAITING "Kliknij by rozp." #define MSG_LEVEL_BED_NEXT_POINT "Nastepny punkt" @@ -49,13 +52,13 @@ #define MSG_HOME_OFFSETS_APPLIED "Poz. zerowa ust." #define MSG_SET_ORIGIN "Ustaw punkt zero" #define MSG_PREHEAT_1 "Rozgrzej PLA" -#define MSG_PREHEAT_1_N "Rozgrzej PLA " -#define MSG_PREHEAT_1_ALL "Rozgrzej PLA " +#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " " +#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All" #define MSG_PREHEAT_1_BEDONLY "Rozgrzej stol PLA" #define MSG_PREHEAT_1_SETTINGS "Ustaw. rozg. PLA" #define MSG_PREHEAT_2 "Rozgrzej ABS" -#define MSG_PREHEAT_2_N "Rozgrzej ABS " -#define MSG_PREHEAT_2_ALL "Rozgrzej ABS " +#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " " +#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All" #define MSG_PREHEAT_2_BEDONLY "Rozgrzej stol ABS" #define MSG_PREHEAT_2_SETTINGS "Ustaw. rozg. ABS" #define MSG_COOLDOWN "Chlodzenie" @@ -89,6 +92,7 @@ #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" +#define MSG_SELECT "Select" #define MSG_ACC "Przyspieszenie" #define MSG_VX_JERK "Zryw Vx" #define MSG_VY_JERK "Zryw Vy" @@ -141,6 +145,8 @@ #define MSG_INIT_SDCARD "Inicjal. karty SD" #define MSG_CNG_SDCARD "Zmiana karty SD" #define MSG_ZPROBE_OUT "Sonda Z za stolem" +#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test" +#define MSG_BLTOUCH_RESET "Reset BLTouch" #define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST "first" #define MSG_ZPROBE_ZOFFSET "Offset Z" @@ -155,6 +161,12 @@ #define MSG_ERR_MINTEMP "Err: min. temp." #define MSG_ERR_MAXTEMP_BED "Err: max. temp. loza" #define MSG_ERR_MINTEMP_BED "Err: min. temp. loza" +#define MSG_ERR_Z_HOMING "G28 Z Forbidden" +#define MSG_HALTED "PRINTER HALTED" +#define MSG_PLEASE_RESET "Please reset" +#define MSG_SHORT_DAY "d" // One character only +#define MSG_SHORT_HOUR "h" // One character only +#define MSG_SHORT_MINUTE "m" // One character only #define MSG_HEATING "Rozgrzewanie..." #define MSG_HEATING_COMPLETE "Rozgrzano" #define MSG_BED_HEATING "Rozgrzewanie stolu..." @@ -165,4 +177,68 @@ #define MSG_DELTA_CALIBRATE_Z "Kalibruj Z" #define MSG_DELTA_CALIBRATE_CENTER "Kalibruj środek" +#define MSG_INFO_MENU "About Printer" +#define MSG_INFO_PRINTER_MENU "Printer Info" +#define MSG_INFO_STATS_MENU "Printer Stats" +#define MSG_INFO_BOARD_MENU "Board Info" +#define MSG_INFO_THERMISTOR_MENU "Thermistors" +#define MSG_INFO_EXTRUDERS "Extruders" +#define MSG_INFO_BAUDRATE "Baud" +#define MSG_INFO_PROTOCOL "Protocol" +#define MSG_LIGHTS_ON "Case light on" +#define MSG_LIGHTS_OFF "Case light off" + +#if LCD_WIDTH >= 20 + #define MSG_INFO_PRINT_COUNT "Print Count" + #define MSG_INFO_COMPLETED_PRINTS "Completed" + #define MSG_INFO_PRINT_TIME "Total print time" + #define MSG_INFO_PRINT_LONGEST "Longest job time" + #define MSG_INFO_PRINT_FILAMENT "Extruded total" +#else + #define MSG_INFO_PRINT_COUNT "Prints" + #define MSG_INFO_COMPLETED_PRINTS "Completed" + #define MSG_INFO_PRINT_TIME "Total" + #define MSG_INFO_PRINT_LONGEST "Longest" + #define MSG_INFO_PRINT_FILAMENT "Extruded" +#endif + +#define MSG_INFO_MIN_TEMP "Min Temp" +#define MSG_INFO_MAX_TEMP "Max Temp" +#define MSG_INFO_PSU "Power Supply" + +#define MSG_DRIVE_STRENGTH "Drive Strength" +#define MSG_DAC_PERCENT "Driver %" +#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write" +#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT" +#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:" +#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more" +#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print" +#if LCD_HEIGHT >= 4 + #define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start" + #define MSG_FILAMENT_CHANGE_INIT_2 "of the filament" + #define MSG_FILAMENT_CHANGE_INIT_3 "change" + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for" + #define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload" + #define MSG_FILAMENT_CHANGE_UNLOAD_3 "" + #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament" + #define MSG_FILAMENT_CHANGE_INSERT_2 "and press button" + #define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..." + #define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for" + #define MSG_FILAMENT_CHANGE_LOAD_2 "filament load" + #define MSG_FILAMENT_CHANGE_LOAD_3 "" + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for" + #define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude" + #define MSG_FILAMENT_CHANGE_EXTRUDE_3 "" + #define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print" + #define MSG_FILAMENT_CHANGE_RESUME_2 "to resume" + #define MSG_FILAMENT_CHANGE_RESUME_3 "" +#else // LCD_HEIGHT < 4 + #define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..." + #define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..." + #define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click" + #define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..." + #define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..." + #define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..." +#endif // LCD_HEIGHT < 4 + #endif // LANGUAGE_PL_H