Please install the EditorConfig plugin

This commit is contained in:
Scott Lahteine 2020-12-14 21:27:05 -06:00
parent e188b3e28c
commit 46d2dc9bee
2 changed files with 3 additions and 3 deletions

View file

@ -957,14 +957,14 @@
* X and Y offset
* Use a caliper or ruler to measure the distance from the tip of
* the Nozzle to the center-point of the Probe in the X and Y axes.
*
*
* Z offset
* - For the Z offset use your best known value and adjust at runtime.
* - Common probes trigger below the nozzle and have negative values for Z offset.
* - Probes triggering above the nozzle height are uncommon but do exist. When using
* probes such as this, carefully set Z_CLEARANCE_DEPLOY_PROBE and Z_CLEARANCE_BETWEEN_PROBES
* to avoid collisions during probing.
*
*
* Tune and Adjust
* - Probe Offsets can be tuned at runtime with 'M851', LCD menus, babystepping, etc.
* - PROBE_OFFSET_WIZARD (configuration_adv.h) can be used for setting the Z offset.

View file

@ -60,7 +60,7 @@
//
#ifndef HAS_PIN_27_BOARD
#define SERVO0_PIN PB0 // BLTouch OUT
#else
#else
#define SERVO0_PIN PC6
#endif