zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🎨 Flags for homing directions

Browse source
This commit is contained in:
Scott Lahteine 2021-05-19 00:21:34 -05:00 committed by Scott Lahteine
parent 85fa8c55c9
commit 49b05ba989
27 changed files with 131 additions and 114 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
View file

@ -144,7 +144,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#error "Serial port pins (2) conflict with Z4 pins!"
#elif ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
#error "Serial port pins (2) conflict with other pins!"
#elif Y_HOME_DIR < 0 && IS_TX2(Y_STOP_PIN)
#elif Y_HOME_TO_MIN && IS_TX2(Y_STOP_PIN)
#error "Serial port pins (2) conflict with Y endstop pin!"
#elif HAS_CUSTOM_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN)
#error "Serial port pins (2) conflict with probe pin!"

2
Marlin/src/feature/powerloss.cpp
View file

@ -375,7 +375,7 @@ void PrintJobRecovery::resume() {
gcode.process_subcommands_now_P(PSTR("G92.9E0")); // Reset E to 0
#if Z_HOME_DIR > 0
#if Z_HOME_TO_MAX
float z_now = z_raised;

2
Marlin/src/gcode/calibrate/G28.cpp
View file

@ -73,7 +73,7 @@
current_position.set(0.0, 0.0);
sync_plan_position();
const int x_axis_home_dir = x_home_dir(active_extruder);
const int x_axis_home_dir = TOOL_X_HOME_DIR(active_extruder);
const float mlx = max_length(X_AXIS),
mly = max_length(Y_AXIS),

21
Marlin/src/inc/Conditionals_LCD.h
View file

@ -814,6 +814,23 @@
#endif
#endif // FILAMENT_RUNOUT_SENSOR
// Homing to Min or Max
#if X_HOME_DIR > 0
#define X_HOME_TO_MAX 1
#elif X_HOME_DIR < 0
#define X_HOME_TO_MIN 1
#endif
#if Y_HOME_DIR > 0
#define Y_HOME_TO_MAX 1
#elif Y_HOME_DIR < 0
#define Y_HOME_TO_MIN 1
#endif
#if Z_HOME_DIR > 0
#define Z_HOME_TO_MAX 1
#elif Z_HOME_DIR < 0
#define Z_HOME_TO_MIN 1
#endif
#if HAS_BED_PROBE
#if DISABLED(NOZZLE_AS_PROBE)
#define HAS_PROBE_XY_OFFSET 1
@ -821,7 +838,7 @@
#if DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && !BOTH(DELTA, SENSORLESS_PROBING)
#define HAS_CUSTOM_PROBE_PIN 1
#endif
#if Z_HOME_DIR < 0 && (!HAS_CUSTOM_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING))
#if Z_HOME_TO_MIN && (!HAS_CUSTOM_PROBE_PIN || ENABLED(USE_PROBE_FOR_Z_HOMING))
#define HOMING_Z_WITH_PROBE 1
#endif
#ifndef Z_PROBE_LOW_POINT
@ -843,7 +860,7 @@
#undef USE_PROBE_FOR_Z_HOMING
#endif
#if Z_HOME_DIR > 0
#if Z_HOME_TO_MAX
#define HOME_Z_FIRST // If homing away from BED do Z first
#endif

6
Marlin/src/inc/Conditionals_adv.h
View file

@ -391,6 +391,12 @@
#define POLL_JOG
#endif
#if X2_HOME_DIR > 0
#define X2_HOME_TO_MAX 1
#elif X2_HOME_DIR < 0
#define X2_HOME_TO_MIN 1
#endif
#ifndef HOMING_BUMP_MM
#define HOMING_BUMP_MM { 0, 0, 0 }
#endif

16
Marlin/src/inc/Conditionals_post.h
View file

@ -155,7 +155,7 @@
#ifdef MANUAL_X_HOME_POS
#define X_HOME_POS MANUAL_X_HOME_POS
#else
#define X_END_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
#define X_END_POS TERN(X_HOME_TO_MIN, X_MIN_POS, X_MAX_POS)
#if ENABLED(BED_CENTER_AT_0_0)
#define X_HOME_POS TERN(DELTA, 0, X_END_POS)
#else
@ -166,7 +166,7 @@
#ifdef MANUAL_Y_HOME_POS
#define Y_HOME_POS MANUAL_Y_HOME_POS
#else
#define Y_END_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
#define Y_END_POS TERN(Y_HOME_TO_MIN, Y_MIN_POS, Y_MAX_POS)
#if ENABLED(BED_CENTER_AT_0_0)
#define Y_HOME_POS TERN(DELTA, 0, Y_END_POS)
#else
@ -177,7 +177,7 @@
#ifdef MANUAL_Z_HOME_POS
#define Z_HOME_POS MANUAL_Z_HOME_POS
#else
#define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
#define Z_HOME_POS TERN(Z_HOME_TO_MIN, Z_MIN_POS, Z_MAX_POS)
#endif
/**
@ -798,7 +798,7 @@
* X_DUAL_ENDSTOPS endstop reassignment
*/
#if ENABLED(X_DUAL_ENDSTOPS)
#if X_HOME_DIR > 0
#if X_HOME_TO_MAX
#ifndef X2_MAX_ENDSTOP_INVERTING
#if X2_USE_ENDSTOP == _XMIN_
#define X2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
@ -921,7 +921,7 @@
* Y_DUAL_ENDSTOPS endstop reassignment
*/
#if ENABLED(Y_DUAL_ENDSTOPS)
#if Y_HOME_DIR > 0
#if Y_HOME_TO_MAX
#ifndef Y2_MAX_ENDSTOP_INVERTING
#if Y2_USE_ENDSTOP == _XMIN_
#define Y2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
@ -1045,7 +1045,7 @@
*/
#if ENABLED(Z_MULTI_ENDSTOPS)
#if Z_HOME_DIR > 0
#if Z_HOME_TO_MAX
#ifndef Z2_MAX_ENDSTOP_INVERTING
#if Z2_USE_ENDSTOP == _XMIN_
#define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
@ -1164,7 +1164,7 @@
#endif
#if NUM_Z_STEPPER_DRIVERS >= 3
#if Z_HOME_DIR > 0
#if Z_HOME_TO_MAX
#ifndef Z3_MAX_ENDSTOP_INVERTING
#if Z3_USE_ENDSTOP == _XMIN_
#define Z3_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
@ -1284,7 +1284,7 @@
#endif
#if NUM_Z_STEPPER_DRIVERS >= 4
#if Z_HOME_DIR > 0
#if Z_HOME_TO_MAX
#ifndef Z4_MAX_ENDSTOP_INVERTING
#if Z4_USE_ENDSTOP == _XMIN_
#define Z4_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING

46
Marlin/src/inc/SanityCheck.h
View file

@ -1682,7 +1682,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
* Allen Key
* Deploying the Allen Key probe uses big moves in z direction. Too dangerous for an unhomed z-axis.
*/
#if BOTH(Z_PROBE_ALLEN_KEY, Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) && Z_HOME_DIR < 0
#if ALL(Z_HOME_TO_MIN, Z_PROBE_ALLEN_KEY, Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
#error "You can't home to a Z min endstop with a Z_PROBE_ALLEN_KEY."
#endif
@ -1700,7 +1700,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#error "DUAL_X_CARRIAGE requires USE_XMAX_PLUG and an X Max Endstop."
#elif !defined(X2_HOME_POS) || !defined(X2_MIN_POS) || !defined(X2_MAX_POS)
#error "DUAL_X_CARRIAGE requires X2_HOME_POS, X2_MIN_POS, and X2_MAX_POS."
#elif X_HOME_DIR != -1 || X2_HOME_DIR != 1
#elif X_HOME_TO_MAX || X2_HOME_TO_MIN
#error "DUAL_X_CARRIAGE requires X_HOME_DIR -1 and X2_HOME_DIR 1."
#endif
#endif
@ -2089,25 +2089,25 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
// Delta and Cartesian use 3 homing endstops
#if NONE(IS_SCARA, SPI_ENDSTOPS)
#if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG)
#if X_HOME_TO_MIN && DISABLED(USE_XMIN_PLUG)
#error "Enable USE_XMIN_PLUG when homing X to MIN."
#elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG)
#elif X_HOME_TO_MAX && DISABLED(USE_XMAX_PLUG)
#error "Enable USE_XMAX_PLUG when homing X to MAX."
#elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG)
#elif Y_HOME_TO_MIN && DISABLED(USE_YMIN_PLUG)
#error "Enable USE_YMIN_PLUG when homing Y to MIN."
#elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG)
#elif Y_HOME_TO_MAX && DISABLED(USE_YMAX_PLUG)
#error "Enable USE_YMAX_PLUG when homing Y to MAX."
#endif
#endif
// Z homing direction and plug usage flags
#if Z_HOME_DIR < 0 && NONE(USE_ZMIN_PLUG, HOMING_Z_WITH_PROBE)
#if Z_HOME_TO_MIN && NONE(USE_ZMIN_PLUG, HOMING_Z_WITH_PROBE)
#error "Enable USE_ZMIN_PLUG when homing Z to MIN."
#elif Z_HOME_DIR > 0 && ENABLED(USE_PROBE_FOR_Z_HOMING)
#elif Z_HOME_TO_MAX && ENABLED(USE_PROBE_FOR_Z_HOMING)
#error "Z_HOME_DIR must be -1 when homing Z with the probe."
#elif BOTH(HOMING_Z_WITH_PROBE, Z_MULTI_ENDSTOPS)
#error "Z_MULTI_ENDSTOPS is incompatible with USE_PROBE_FOR_Z_HOMING."
#elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG)
#elif Z_HOME_TO_MAX && DISABLED(USE_ZMAX_PLUG)
#error "Enable USE_ZMAX_PLUG when homing Z to MAX."
#endif
#endif
@ -2630,17 +2630,17 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#define Z_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Z,TMC2209)
#if NONE(SPI_ENDSTOPS, ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS)
#if X_SENSORLESS && X_HOME_DIR < 0 && DISABLED(ENDSTOPPULLUP_XMIN)
#if X_SENSORLESS && X_HOME_TO_MIN && DISABLED(ENDSTOPPULLUP_XMIN)
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMIN (or ENDSTOPPULLUPS) when homing to X_MIN."
#elif X_SENSORLESS && X_HOME_DIR > 0 && DISABLED(ENDSTOPPULLUP_XMAX)
#elif X_SENSORLESS && X_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_XMAX)
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_XMAX (or ENDSTOPPULLUPS) when homing to X_MAX."
#elif Y_SENSORLESS && Y_HOME_DIR < 0 && DISABLED(ENDSTOPPULLUP_YMIN)
#elif Y_SENSORLESS && Y_HOME_TO_MIN && DISABLED(ENDSTOPPULLUP_YMIN)
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMIN (or ENDSTOPPULLUPS) when homing to Y_MIN."
#elif Y_SENSORLESS && Y_HOME_DIR > 0 && DISABLED(ENDSTOPPULLUP_YMAX)
#elif Y_SENSORLESS && Y_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_YMAX)
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_YMAX (or ENDSTOPPULLUPS) when homing to Y_MAX."
#elif Z_SENSORLESS && Z_HOME_DIR < 0 && DISABLED(ENDSTOPPULLUP_ZMIN)
#elif Z_SENSORLESS && Z_HOME_TO_MIN && DISABLED(ENDSTOPPULLUP_ZMIN)
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMIN (or ENDSTOPPULLUPS) when homing to Z_MIN."
#elif Z_SENSORLESS && Z_HOME_DIR > 0 && DISABLED(ENDSTOPPULLUP_ZMAX)
#elif Z_SENSORLESS && Z_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_ZMAX)
#error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMAX (or ENDSTOPPULLUPS) when homing to Z_MAX."
#endif
#endif
@ -2650,37 +2650,37 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
#warning "SPI_ENDSTOPS may be unreliable with QUICK_HOME. Adjust back-offs for better results."
#endif
#else
#if X_SENSORLESS && X_HOME_DIR < 0 && X_MIN_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
#if X_SENSORLESS && X_HOME_TO_MIN && X_MIN_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
#if X_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = true when homing to X_MIN."
#else
#error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to X_MIN."
#endif
#elif X_SENSORLESS && X_HOME_DIR > 0 && X_MAX_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
#elif X_SENSORLESS && X_HOME_TO_MAX && X_MAX_ENDSTOP_INVERTING != X_ENDSTOP_INVERTING
#if X_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = true when homing to X_MAX."
#else
#error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to X_MAX."
#endif
#elif Y_SENSORLESS && Y_HOME_DIR < 0 && Y_MIN_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
#elif Y_SENSORLESS && Y_HOME_TO_MIN && Y_MIN_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
#if Y_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = true when homing to Y_MIN."
#else
#error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MIN."
#endif
#elif Y_SENSORLESS && Y_HOME_DIR > 0 && Y_MAX_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
#elif Y_SENSORLESS && Y_HOME_TO_MAX && Y_MAX_ENDSTOP_INVERTING != Y_ENDSTOP_INVERTING
#if Y_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = true when homing to Y_MAX."
#else
#error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Y_MAX."
#endif
#elif Z_SENSORLESS && Z_HOME_DIR < 0 && Z_MIN_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
#elif Z_SENSORLESS && Z_HOME_TO_MIN && Z_MIN_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
#if Z_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = true when homing to Z_MIN."
#else
#error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MIN."
#endif
#elif Z_SENSORLESS && Z_HOME_DIR > 0 && Z_MAX_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
#elif Z_SENSORLESS && Z_HOME_TO_MAX && Z_MAX_ENDSTOP_INVERTING != Z_ENDSTOP_INVERTING
#if Z_ENDSTOP_INVERTING
#error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = true when homing to Z_MAX."
#else
@ -2918,9 +2918,9 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
#error "POWER_LOSS_RECOVER_ZHOME cannot be used with Z_SAFE_HOMING."
#elif BOTH(POWER_LOSS_PULLUP, POWER_LOSS_PULLDOWN)
#error "You can't enable POWER_LOSS_PULLUP and POWER_LOSS_PULLDOWN at the same time."
#elif ENABLED(POWER_LOSS_RECOVER_ZHOME) && Z_HOME_DIR > 0
#elif ENABLED(POWER_LOSS_RECOVER_ZHOME) && Z_HOME_TO_MAX
#error "POWER_LOSS_RECOVER_ZHOME is not needed on a machine that homes to ZMAX."
#elif BOTH(IS_CARTESIAN, POWER_LOSS_RECOVER_ZHOME) && Z_HOME_DIR < 0 && !defined(POWER_LOSS_ZHOME_POS)
#elif BOTH(IS_CARTESIAN, POWER_LOSS_RECOVER_ZHOME) && Z_HOME_TO_MIN && !defined(POWER_LOSS_ZHOME_POS)
#error "POWER_LOSS_RECOVER_ZHOME requires POWER_LOSS_ZHOME_POS for a Cartesian that homes to ZMIN."
#endif
#endif

2
Marlin/src/lcd/extui/ftdi_eve_touch_ui/screens/move_axis_screen.cpp
View file

@ -66,7 +66,7 @@ void MoveAxisScreen::onRedraw(draw_mode_t what) {
w.adjuster( 14, GET_TEXT_F(MSG_AXIS_E4), mydata.e_rel[3], canMove(E3));
#endif
#endif
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
w.button(24, GET_TEXT_F(MSG_MOVE_Z_TO_TOP), !axis_should_home(Z_AXIS));
#endif
w.increments();

4
Marlin/src/lcd/marlinui.cpp
View file

@ -488,12 +488,12 @@ bool MarlinUI::get_blink() {
if (RRK(EN_KEYPAD_MIDDLE)) goto_screen(menu_move);
#if DISABLED(DELTA) && Z_HOME_DIR < 0
#if NONE(DELTA, Z_HOME_TO_MAX)
if (RRK(EN_KEYPAD_F2)) _reprapworld_keypad_move(Z_AXIS, 1);
#endif
if (homed) {
#if ENABLED(DELTA) || Z_HOME_DIR != -1
#if EITHER(DELTA, Z_HOME_TO_MAX)
if (RRK(EN_KEYPAD_F2)) _reprapworld_keypad_move(Z_AXIS, 1);
#endif
if (RRK(EN_KEYPAD_F3)) _reprapworld_keypad_move(Z_AXIS, -1);

22
Marlin/src/module/endstops.cpp
View file

@ -513,14 +513,8 @@ void Endstops::update() {
#endif
// With Dual X, endstops are only checked in the homing direction for the active extruder
#if ENABLED(DUAL_X_CARRIAGE)
#define E0_ACTIVE stepper.last_moved_extruder == 0
#define X_MIN_TEST() ((X_HOME_DIR < 0 && E0_ACTIVE) || (X2_HOME_DIR < 0 && !E0_ACTIVE))
#define X_MAX_TEST() ((X_HOME_DIR > 0 && E0_ACTIVE) || (X2_HOME_DIR > 0 && !E0_ACTIVE))
#else
#define X_MIN_TEST() true
#define X_MAX_TEST() true
#endif
#define X_MIN_TEST() TERN1(DUAL_X_CARRIAGE, TERN0(X_HOME_TO_MIN, stepper.last_moved_extruder == 0) || TERN0(X2_HOME_TO_MIN, stepper.last_moved_extruder != 0))
#define X_MAX_TEST() TERN1(DUAL_X_CARRIAGE, TERN0(X_HOME_TO_MAX, stepper.last_moved_extruder == 0) || TERN0(X2_HOME_TO_MAX, stepper.last_moved_extruder != 0))
// Use HEAD for core axes, AXIS for others
#if ANY(CORE_IS_XY, CORE_IS_XZ, MARKFORGED_XY)
@ -765,7 +759,7 @@ void Endstops::update() {
if (stepper.axis_is_moving(X_AXIS)) {
if (stepper.motor_direction(X_AXIS_HEAD)) { // -direction
#if HAS_X_MIN || (X_SPI_SENSORLESS && X_HOME_DIR < 0)
#if HAS_X_MIN || (X_SPI_SENSORLESS && X_HOME_TO_MIN)
PROCESS_ENDSTOP_X(MIN);
#if CORE_DIAG(XY, Y, MIN)
PROCESS_CORE_ENDSTOP(Y,MIN,X,MIN);
@ -779,7 +773,7 @@ void Endstops::update() {
#endif
}
else { // +direction
#if HAS_X_MAX || (X_SPI_SENSORLESS && X_HOME_DIR > 0)
#if HAS_X_MAX || (X_SPI_SENSORLESS && X_HOME_TO_MAX)
PROCESS_ENDSTOP_X(MAX);
#if CORE_DIAG(XY, Y, MIN)
PROCESS_CORE_ENDSTOP(Y,MIN,X,MAX);
@ -796,7 +790,7 @@ void Endstops::update() {
if (stepper.axis_is_moving(Y_AXIS)) {
if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
#if HAS_Y_MIN || (Y_SPI_SENSORLESS && Y_HOME_DIR < 0)
#if HAS_Y_MIN || (Y_SPI_SENSORLESS && Y_HOME_TO_MIN)
PROCESS_ENDSTOP_Y(MIN);
#if CORE_DIAG(XY, X, MIN)
PROCESS_CORE_ENDSTOP(X,MIN,Y,MIN);
@ -810,7 +804,7 @@ void Endstops::update() {
#endif
}
else { // +direction
#if HAS_Y_MAX || (Y_SPI_SENSORLESS && Y_HOME_DIR > 0)
#if HAS_Y_MAX || (Y_SPI_SENSORLESS && Y_HOME_TO_MAX)
PROCESS_ENDSTOP_Y(MAX);
#if CORE_DIAG(XY, X, MIN)
PROCESS_CORE_ENDSTOP(X,MIN,Y,MAX);
@ -828,7 +822,7 @@ void Endstops::update() {
if (stepper.axis_is_moving(Z_AXIS)) {
if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
#if HAS_Z_MIN || (Z_SPI_SENSORLESS && Z_HOME_DIR < 0)
#if HAS_Z_MIN || (Z_SPI_SENSORLESS && Z_HOME_TO_MIN)
if ( TERN1(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN, z_probe_enabled)
&& TERN1(HAS_CUSTOM_PROBE_PIN, !z_probe_enabled)
) PROCESS_ENDSTOP_Z(MIN);
@ -849,7 +843,7 @@ void Endstops::update() {
#endif
}
else { // Z +direction. Gantry up, bed down.
#if HAS_Z_MAX || (Z_SPI_SENSORLESS && Z_HOME_DIR > 0)
#if HAS_Z_MAX || (Z_SPI_SENSORLESS && Z_HOME_TO_MAX)
#if ENABLED(Z_MULTI_ENDSTOPS)
PROCESS_ENDSTOP_Z(MAX);
#elif !HAS_CUSTOM_PROBE_PIN || Z_MAX_PIN != Z_MIN_PROBE_PIN // No probe or probe is Z_MIN || Probe is not Z_MAX

6
Marlin/src/module/endstops.h
View file

@ -62,9 +62,9 @@ enum EndstopEnum : char {
NUM_ENDSTOP_STATES
};
#define X_ENDSTOP (x_home_dir(active_extruder) < 0 ? X_MIN : X_MAX)
#define Y_ENDSTOP (Y_HOME_DIR < 0 ? Y_MIN : Y_MAX)
#define Z_ENDSTOP (Z_HOME_DIR < 0 ? TERN(HOMING_Z_WITH_PROBE, Z_MIN, Z_MIN_PROBE) : Z_MAX)
#define X_ENDSTOP TERN(X_HOME_TO_MAX, X_MAX, X_MIN)
#define Y_ENDSTOP TERN(Y_HOME_TO_MAX, Y_MAX, Y_MIN)
#define Z_ENDSTOP TERN(Z_HOME_TO_MAX, Z_MAX, TERN(HOMING_Z_WITH_PROBE, Z_MIN, Z_MIN_PROBE))
#undef __ES_ITEM
#undef _ES_ITEM

10
Marlin/src/module/motion.cpp
View file

@ -1378,7 +1378,7 @@ void prepare_line_to_destination() {
// Only do some things when moving towards an endstop
const int8_t axis_home_dir = TERN0(DUAL_X_CARRIAGE, axis == X_AXIS)
? x_home_dir(active_extruder) : home_dir(axis);
? TOOL_X_HOME_DIR(active_extruder) : home_dir(axis);
const bool is_home_dir = (axis_home_dir > 0) == (distance > 0);
#if ENABLED(SENSORLESS_HOMING)
@ -1562,8 +1562,8 @@ void prepare_line_to_destination() {
#define _CAN_HOME(A) (axis == _AXIS(A) && ( \
ENABLED(A##_SPI_SENSORLESS) \
|| (_AXIS(A) == Z_AXIS && ENABLED(HOMING_Z_WITH_PROBE)) \
|| (A##_MIN_PIN > -1 && A##_HOME_DIR < 0) \
|| (A##_MAX_PIN > -1 && A##_HOME_DIR > 0) \
|| TERN0(A##_HOME_TO_MIN, A##_MIN_PIN > -1) \
|| TERN0(A##_HOME_TO_MAX, A##_MAX_PIN > -1) \
))
if (!_CAN_HOME(X) && !_CAN_HOME(Y) && !_CAN_HOME(Z)) return;
#endif
@ -1571,7 +1571,7 @@ void prepare_line_to_destination() {
if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR(">>> homeaxis(", AS_CHAR(axis_codes[axis]), ")");
const int axis_home_dir = TERN0(DUAL_X_CARRIAGE, axis == X_AXIS)
? x_home_dir(active_extruder) : home_dir(axis);
? TOOL_X_HOME_DIR(active_extruder) : home_dir(axis);
//
// Homing Z with a probe? Raise Z (maybe) and deploy the Z probe.
@ -1916,7 +1916,7 @@ void set_axis_is_at_home(const AxisEnum axis) {
/**
* Z Probe Z Homing? Account for the probe's Z offset.
*/
#if HAS_BED_PROBE && Z_HOME_DIR < 0
#if HAS_BED_PROBE && Z_HOME_TO_MIN
if (axis == Z_AXIS) {
#if HOMING_Z_WITH_PROBE

4
Marlin/src/module/motion.h
View file

@ -517,7 +517,7 @@ FORCE_INLINE bool all_axes_trusted() { return linear_bits
float x_home_pos(const uint8_t extruder);
FORCE_INLINE int x_home_dir(const uint8_t extruder) { return extruder ? X2_HOME_DIR : X_HOME_DIR; }
#define TOOL_X_HOME_DIR(T) ((T) ? X2_HOME_DIR : X_HOME_DIR)
void set_duplication_enabled(const bool dupe, const int8_t tool_index=-1);
void idex_set_mirrored_mode(const bool mirr);
@ -531,7 +531,7 @@ FORCE_INLINE bool all_axes_trusted() { return linear_bits
FORCE_INLINE void set_duplication_enabled(const bool dupe) { extruder_duplication_enabled = dupe; }
#endif
FORCE_INLINE int x_home_dir(const uint8_t) { return X_HOME_DIR; }
#define TOOL_X_HOME_DIR(T) X_HOME_DIR
#endif

2
Marlin/src/module/scara.cpp
View file

@ -221,7 +221,7 @@ float segments_per_second = TERN(AXEL_TPARA, TPARA_SEGMENTS_PER_SECOND, SCARA_SE
TERN_(Z_SENSORLESS, sensorless_t stealth_states_z = start_sensorless_homing_per_axis(Z_AXIS));
#endif
// const int x_axis_home_dir = x_home_dir(active_extruder);
//const int x_axis_home_dir = TOOL_X_HOME_DIR(active_extruder);
//const xy_pos_t pos { max_length(X_AXIS) , max_length(Y_AXIS) };
//const float mlz = max_length(X_AXIS),

6
Marlin/src/module/stepper.cpp
View file

@ -259,7 +259,7 @@ xyze_int8_t Stepper::count_direction{0};
#define DUAL_ENDSTOP_APPLY_STEP(A,V) \
if (separate_multi_axis) { \
if (A##_HOME_DIR < 0) { \
if (A##_HOME_TO_MIN) { \
if (TERN0(HAS_##A##_MIN, !(TEST(endstops.state(), A##_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##_motor)) A##_STEP_WRITE(V); \
if (TERN0(HAS_##A##2_MIN, !(TEST(endstops.state(), A##2_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##2_motor)) A##2_STEP_WRITE(V); \
} \
@ -285,7 +285,7 @@ xyze_int8_t Stepper::count_direction{0};
#define TRIPLE_ENDSTOP_APPLY_STEP(A,V) \
if (separate_multi_axis) { \
if (A##_HOME_DIR < 0) { \
if (A##_HOME_TO_MIN) { \
if (!(TEST(endstops.state(), A##_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##_motor) A##_STEP_WRITE(V); \
if (!(TEST(endstops.state(), A##2_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##2_motor) A##2_STEP_WRITE(V); \
if (!(TEST(endstops.state(), A##3_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##3_motor) A##3_STEP_WRITE(V); \
@ -316,7 +316,7 @@ xyze_int8_t Stepper::count_direction{0};
#define QUAD_ENDSTOP_APPLY_STEP(A,V) \
if (separate_multi_axis) { \
if (A##_HOME_DIR < 0) { \
if (A##_HOME_TO_MIN) { \
if (!(TEST(endstops.state(), A##_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##_motor) A##_STEP_WRITE(V); \
if (!(TEST(endstops.state(), A##2_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##2_motor) A##2_STEP_WRITE(V); \
if (!(TEST(endstops.state(), A##3_MIN) && count_direction[_AXIS(A)] < 0) && !locked_##A##3_motor) A##3_STEP_WRITE(V); \

6
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h
View file

@ -38,7 +38,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN P1_28 // X+
#else
#define X_MIN_PIN P1_28 // X+
@ -50,7 +50,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN P1_26 // Y+
#else
#define Y_MIN_PIN P1_26 // Y+
@ -62,7 +62,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN P1_24 // Z+
#else
#define Z_MIN_PIN P1_24 // Z+

6
Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h
View file

@ -50,7 +50,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN P1_26 // E0DET
#else
#define X_MIN_PIN P1_26 // E0DET
@ -68,7 +68,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN P1_25 // E1DET
#else
#define Y_MIN_PIN P1_25 // E1DET
@ -86,7 +86,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN P1_00 // PWRDET
#else
#define Z_MIN_PIN P1_00 // PWRDET

6
Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h
View file

@ -50,7 +50,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN P1_28 // X+
#else
#define X_MIN_PIN P1_28 // X+
@ -62,7 +62,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN P1_26 // Y+
#else
#define Y_MIN_PIN P1_26 // Y+
@ -74,7 +74,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN P1_24 // Z+
#else
#define Z_MIN_PIN P1_24 // Z+

6
Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h
View file

@ -60,7 +60,7 @@
//
#if X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN P1_28 // X+
#else
#define X_MIN_PIN P1_28 // X+
@ -72,7 +72,7 @@
#if Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN P1_26 // Y+
#else
#define Y_MIN_PIN P1_26 // Y+
@ -84,7 +84,7 @@
#if Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN P1_24 // Z+
#else
#define Z_MIN_PIN P1_24 // Z+

32
Marlin/src/pins/pins_postprocess.h
View file

@ -385,7 +385,7 @@
// Assign endstop pins for boards with only 3 connectors
//
#ifdef X_STOP_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MIN_PIN X_STOP_PIN
#ifndef X_MAX_PIN
#define X_MAX_PIN -1
@ -396,14 +396,14 @@
#define X_MIN_PIN -1
#endif
#endif
#elif X_HOME_DIR < 0
#elif X_HOME_TO_MIN
#define X_STOP_PIN X_MIN_PIN
#else
#define X_STOP_PIN X_MAX_PIN
#endif
#ifdef Y_STOP_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MIN_PIN Y_STOP_PIN
#ifndef Y_MAX_PIN
#define Y_MAX_PIN -1
@ -414,14 +414,14 @@
#define Y_MIN_PIN -1
#endif
#endif
#elif Y_HOME_DIR < 0
#elif Y_HOME_TO_MIN
#define Y_STOP_PIN Y_MIN_PIN
#else
#define Y_STOP_PIN Y_MAX_PIN
#endif
#ifdef Z_STOP_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MIN_PIN Z_STOP_PIN
#ifndef Z_MAX_PIN
#define Z_MAX_PIN -1
@ -432,7 +432,7 @@
#define Z_MIN_PIN -1
#endif
#endif
#elif Z_HOME_DIR < 0
#elif Z_HOME_TO_MIN
#define Z_STOP_PIN Z_MIN_PIN
#else
#define Z_STOP_PIN Z_MAX_PIN
@ -489,34 +489,34 @@
#undef Z_MIN_PIN
#define Z_MIN_PIN -1
#endif
#if DISABLED(X_DUAL_ENDSTOPS) || X_HOME_DIR > 0
#if DISABLED(X_DUAL_ENDSTOPS) || X_HOME_TO_MAX
#undef X2_MIN_PIN
#endif
#if DISABLED(X_DUAL_ENDSTOPS) || X_HOME_DIR < 0
#if DISABLED(X_DUAL_ENDSTOPS) || X_HOME_TO_MIN
#undef X2_MAX_PIN
#endif
#if DISABLED(Y_DUAL_ENDSTOPS) || Y_HOME_DIR > 0
#if DISABLED(Y_DUAL_ENDSTOPS) || Y_HOME_TO_MAX
#undef Y2_MIN_PIN
#endif
#if DISABLED(Y_DUAL_ENDSTOPS) || Y_HOME_DIR < 0
#if DISABLED(Y_DUAL_ENDSTOPS) || Y_HOME_TO_MIN
#undef Y2_MAX_PIN
#endif
#if DISABLED(Z_MULTI_ENDSTOPS) || Z_HOME_DIR > 0
#if DISABLED(Z_MULTI_ENDSTOPS) || Z_HOME_TO_MAX
#undef Z2_MIN_PIN
#endif
#if DISABLED(Z_MULTI_ENDSTOPS) || Z_HOME_DIR < 0
#if DISABLED(Z_MULTI_ENDSTOPS) || Z_HOME_TO_MIN
#undef Z2_MAX_PIN
#endif
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 3 || Z_HOME_DIR > 0
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 3 || Z_HOME_TO_MAX
#undef Z3_MIN_PIN
#endif
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 3 || Z_HOME_DIR < 0
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 3 || Z_HOME_TO_MIN
#undef Z3_MAX_PIN
#endif
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 4 || Z_HOME_DIR > 0
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 4 || Z_HOME_TO_MAX
#undef Z4_MIN_PIN
#endif
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 4 || Z_HOME_DIR < 0
#if DISABLED(Z_MULTI_ENDSTOPS) || NUM_Z_STEPPER_DRIVERS < 4 || Z_HOME_TO_MIN
#undef Z4_MAX_PIN
#endif

4
Marlin/src/pins/rambo/pins_EINSY_RETRO.h
View file

@ -61,7 +61,7 @@
#else
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MIN_PIN X_DIAG_PIN
#define X_MAX_PIN 81 // X+
#else
@ -69,7 +69,7 @@
#define X_MAX_PIN X_DIAG_PIN
#endif
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MIN_PIN Y_DIAG_PIN
#define Y_MAX_PIN 57 // Y+
#else

4
Marlin/src/pins/sam/pins_ARCHIM2.h
View file

@ -71,7 +71,7 @@
#define E0_DIAG_PIN 78 // PB23
#define E1_DIAG_PIN 25 // PD0
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MIN_PIN X_DIAG_PIN
#define X_MAX_PIN 32
#else
@ -79,7 +79,7 @@
#define X_MAX_PIN X_DIAG_PIN
#endif
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MIN_PIN Y_DIAG_PIN
#define Y_MAX_PIN 15
#else

2
Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
View file

@ -55,7 +55,7 @@
#define X2_DIR_PIN FPC10_PIN // X2DIR
#define X2_SERIAL_TX_PIN FPC12_PIN // X2UART
#define X2_SERIAL_RX_PIN FPC12_PIN // X2UART
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN FPC2_PIN // X2-STOP
#else
#define X_MIN_PIN FPC2_PIN // X2-STOP

6
Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h
View file

@ -69,7 +69,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN E0_DIAG_PIN // X+
#else
#define X_MIN_PIN E0_DIAG_PIN // X+
@ -81,7 +81,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN E1_DIAG_PIN // Y+
#else
#define Y_MIN_PIN E1_DIAG_PIN // Y+
@ -93,7 +93,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN E2_DIAG_PIN // Z+
#else
#define Z_MIN_PIN E2_DIAG_PIN // Z+

6
Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_0.h
View file

@ -71,7 +71,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN E0_DIAG_PIN // E0DET
#else
#define X_MIN_PIN E0_DIAG_PIN // E0DET
@ -89,7 +89,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN E1_DIAG_PIN // E1DET
#else
#define Y_MIN_PIN E1_DIAG_PIN // E1DET
@ -107,7 +107,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN E2_DIAG_PIN // PWRDET
#else
#define Z_MIN_PIN E2_DIAG_PIN // PWRDET

6
Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
View file

@ -71,7 +71,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN PE15 // E0
#else
#define X_MIN_PIN PE15 // E0
@ -83,7 +83,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN PE10 // E1
#else
#define Y_MIN_PIN PE10 // E1
@ -95,7 +95,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN PG5 // E2
#else
#define Z_MIN_PIN PG5 // E2

6
Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
View file

@ -72,7 +72,7 @@
//
#ifdef X_STALL_SENSITIVITY
#define X_STOP_PIN X_DIAG_PIN
#if X_HOME_DIR < 0
#if X_HOME_TO_MIN
#define X_MAX_PIN PC2 // E0DET
#else
#define X_MIN_PIN PC2 // E0DET
@ -90,7 +90,7 @@
#ifdef Y_STALL_SENSITIVITY
#define Y_STOP_PIN Y_DIAG_PIN
#if Y_HOME_DIR < 0
#if Y_HOME_TO_MIN
#define Y_MAX_PIN PA0 // E1DET
#else
#define Y_MIN_PIN PA0 // E1DET
@ -108,7 +108,7 @@
#ifdef Z_STALL_SENSITIVITY
#define Z_STOP_PIN Z_DIAG_PIN
#if Z_HOME_DIR < 0
#if Z_HOME_TO_MIN
#define Z_MAX_PIN PC15 // PWRDET
#else
#define Z_MIN_PIN PC15 // PWRDET