Merge pull request #4188 from thinkyhead/rc_birkett_info_menu_jul2
Printer information menu
This commit is contained in:
commit
4a8e191cec
|
@ -161,11 +161,11 @@ script:
|
|||
- opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
- build_marlin
|
||||
#
|
||||
# Enable FILAMENTCHANGEENABLE
|
||||
# Test FILAMENTCHANGEENABLE and LCD_INFO_MENU
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable ULTIMAKERCONTROLLER
|
||||
- opt_enable_adv FILAMENTCHANGEENABLE
|
||||
- opt_enable_adv FILAMENTCHANGEENABLE LCD_INFO_MENU
|
||||
- build_marlin
|
||||
#
|
||||
# Enable filament sensor
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -56,35 +56,21 @@
|
|||
* Marlin release, version and default string
|
||||
*/
|
||||
#ifndef SHORT_BUILD_VERSION
|
||||
#error "SHORT_BUILD_VERSION Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef DETAILED_BUILD_VERSION
|
||||
#error "BUILD_VERSION Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef STRING_DISTRIBUTION_DATE
|
||||
#error "STRING_DISTRIBUTION_DATE Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef PROTOCOL_VERSION
|
||||
#error "PROTOCOL_VERSION Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef MACHINE_NAME
|
||||
#error "MACHINE_NAME Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef SOURCE_CODE_URL
|
||||
#error "SOURCE_CODE_URL Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef DEFAULT_MACHINE_UUID
|
||||
#error "DEFAULT_MACHINE_UUID Information must be specified"
|
||||
#endif
|
||||
|
||||
#ifndef WEBSITE_URL
|
||||
#error "WEBSITE_URL Information must be specified"
|
||||
#error "SHORT_BUILD_VERSION must be specified."
|
||||
#elif !defined(DETAILED_BUILD_VERSION)
|
||||
#error "BUILD_VERSION must be specified."
|
||||
#elif !defined(STRING_DISTRIBUTION_DATE)
|
||||
#error "STRING_DISTRIBUTION_DATE must be specified."
|
||||
#elif !defined(PROTOCOL_VERSION)
|
||||
#error "PROTOCOL_VERSION must be specified."
|
||||
#elif !defined(MACHINE_NAME)
|
||||
#error "MACHINE_NAME must be specified."
|
||||
#elif !defined(SOURCE_CODE_URL)
|
||||
#error "SOURCE_CODE_URL must be specified."
|
||||
#elif !defined(DEFAULT_MACHINE_UUID)
|
||||
#error "DEFAULT_MACHINE_UUID must be specified."
|
||||
#elif !defined(WEBSITE_URL)
|
||||
#error "WEBSITE_URL must be specified."
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
|
@ -473,6 +473,30 @@ static void lcd_implementation_mark_as_selected(uint8_t row, bool isSelected) {
|
|||
u8g.setPrintPos((START_ROW) * (DOG_CHAR_WIDTH), (row + 1) * (DOG_CHAR_HEIGHT));
|
||||
}
|
||||
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
|
||||
static void lcd_implementation_drawmenu_static(uint8_t row, const char* pstr, const char* valstr=NULL, bool center=false) {
|
||||
char c;
|
||||
int8_t n = LCD_WIDTH;
|
||||
u8g.setPrintPos(0, (row + 1) * (DOG_CHAR_HEIGHT));
|
||||
u8g.setColorIndex(1); // normal text
|
||||
if (center) {
|
||||
int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
|
||||
while (--pad >= 0) { lcd_print(' '); n--; }
|
||||
}
|
||||
while (c = pgm_read_byte(pstr)) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
if (valstr) {
|
||||
lcd_print(valstr);
|
||||
n -= lcd_strlen(valstr);
|
||||
}
|
||||
while (n-- > 0) lcd_print(' ');
|
||||
}
|
||||
|
||||
#endif // LCD_INFO_MENU
|
||||
|
||||
static void lcd_implementation_drawmenu_generic(bool isSelected, uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||
UNUSED(pstr);
|
||||
UNUSED(pre_char);
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -370,6 +370,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -372,6 +372,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -366,6 +366,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -366,6 +366,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -365,6 +365,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -370,6 +370,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -366,6 +366,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -364,6 +364,9 @@
|
|||
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
// Some RAMPS and other boards don't detect when an SD card is inserted. You can work
|
||||
|
|
|
@ -520,5 +520,47 @@
|
|||
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#endif
|
||||
#ifndef MSG_INFO_MENU
|
||||
#define MSG_INFO_MENU "About Printer"
|
||||
#endif
|
||||
#ifndef MSG_INFO_PRINTER_MENU
|
||||
#define MSG_INFO_PRINTER_MENU "Printer Info"
|
||||
#endif
|
||||
#ifndef MSG_INFO_STATS_MENU
|
||||
#define MSG_INFO_STATS_MENU "Printer Stats"
|
||||
#endif
|
||||
#ifndef MSG_INFO_BOARD_MENU
|
||||
#define MSG_INFO_BOARD_MENU "Board Info"
|
||||
#endif
|
||||
#ifndef MSG_INFO_THERMISTOR_MENU
|
||||
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
||||
#endif
|
||||
#ifndef MSG_INFO_EXTRUDERS
|
||||
#define MSG_INFO_EXTRUDERS "Extruders"
|
||||
#endif
|
||||
#ifndef MSG_INFO_BAUDRATE
|
||||
#define MSG_INFO_BAUDRATE "Baud"
|
||||
#endif
|
||||
#ifndef MSG_INFO_PROTOCOL
|
||||
#define MSG_INFO_PROTOCOL "Protocol"
|
||||
#endif
|
||||
#ifndef MSG_INFO_TOTAL_PRINTS
|
||||
#define MSG_INFO_TOTAL_PRINTS "Total Prints"
|
||||
#endif
|
||||
#ifndef MSG_INFO_FINISHED_PRINTS
|
||||
#define MSG_INFO_FINISHED_PRINTS "Finished Prints"
|
||||
#endif
|
||||
#ifndef MSG_INFO_PRINT_TIME
|
||||
#define MSG_INFO_PRINT_TIME "Total Print Time"
|
||||
#endif
|
||||
#ifndef MSG_INFO_MIN_TEMP
|
||||
#define MSG_INFO_MIN_TEMP "Min Temp"
|
||||
#endif
|
||||
#ifndef MSG_INFO_MAX_TEMP
|
||||
#define MSG_INFO_MAX_TEMP "Max Temp"
|
||||
#endif
|
||||
#ifndef MSG_INFO_PSU
|
||||
#define MSG_INFO_PSU "Power Supply"
|
||||
#endif
|
||||
|
||||
#endif // LANGUAGE_EN_H
|
||||
|
|
|
@ -24,10 +24,19 @@
|
|||
* 3DRAG (and K8200) Arduino Mega with RAMPS v1.4 pin assignments
|
||||
*/
|
||||
|
||||
#include "pins_RAMPS_14.h"
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "3Drag"
|
||||
#endif
|
||||
|
||||
#ifndef DEFAULT_MACHINE_NAME
|
||||
#define DEFAULT_MACHINE_NAME "3Drag"
|
||||
#endif
|
||||
|
||||
#ifndef DEFAULT_SOURCE_CODE_URL
|
||||
#define DEFAULT_SOURCE_CODE_URL "http://3dprint.elettronicain.it/"
|
||||
#endif
|
||||
|
||||
#include "pins_RAMPS_14.h"
|
||||
|
||||
#undef Z_ENABLE_PIN
|
||||
#define Z_ENABLE_PIN 63
|
||||
|
|
|
@ -31,6 +31,7 @@
|
|||
#endif
|
||||
|
||||
#define DEFAULT_MACHINE_NAME "Makibox"
|
||||
#define BOARD_NAME "5DPrint D8"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
|
|
|
@ -23,6 +23,7 @@
|
|||
/**
|
||||
* Board 99 pin assignments
|
||||
*/
|
||||
#define BOARD_NAME "99 Unknown"
|
||||
|
||||
#define X_STEP_PIN 2
|
||||
#define X_DIR_PIN 3
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "AJ4P"
|
||||
|
||||
// Servo support
|
||||
#define SERVO0_PIN 22 // Motor header MX1
|
||||
#define SERVO1_PIN 23 // Motor header MX2
|
||||
|
|
|
@ -24,6 +24,7 @@
|
|||
* Azteeg X1 pin assignments
|
||||
*/
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#define BOARD_NAME "Azteeg X1"
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#include "pins_SANGUINOLOLU_11.h"
|
||||
|
|
|
@ -24,6 +24,8 @@
|
|||
* AZTEEG_X3 Arduino Mega with RAMPS v1.4 pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "Azteeg X3"
|
||||
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
||||
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||
|
|
|
@ -24,6 +24,8 @@
|
|||
* AZTEEG_X3_PRO (Arduino Mega) pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "Azteeg X3 Pro"
|
||||
|
||||
#include "pins_RAMPS_14.h"
|
||||
|
||||
#undef FAN_PIN
|
||||
|
|
|
@ -24,6 +24,8 @@
|
|||
* BAM&DICE Due (Arduino Mega) pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "2PrintBeta Due"
|
||||
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
||||
#undef TEMP_0_PIN
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "ZUM Mega 3D"
|
||||
|
||||
#include "pins_RAMPS_13.h"
|
||||
|
||||
#undef X_MAX_PIN
|
||||
|
|
|
@ -31,6 +31,8 @@
|
|||
#error "Oops! Make sure you have 'Brainwave' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Brainwave"
|
||||
|
||||
#define X_STEP_PIN 27
|
||||
#define X_DIR_PIN 29
|
||||
#define X_ENABLE_PIN 28
|
||||
|
|
|
@ -37,6 +37,8 @@
|
|||
#error "Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Brainwave Pro"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 33
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Cheaptronic v1.0"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
// X motor stepper
|
||||
|
|
|
@ -6,6 +6,8 @@
|
|||
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "CN Controls V12"
|
||||
|
||||
//#define LARGE_FLASH true
|
||||
|
||||
#define X_ENABLE_PIN 26
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Elefu Ra v3"
|
||||
|
||||
#define X_STEP_PIN 49
|
||||
#define X_DIR_PIN 13
|
||||
#define X_ENABLE_PIN 48
|
||||
|
|
|
@ -24,6 +24,8 @@
|
|||
* FELIXprinters v2.0/3.0 (RAMPS v1.4) pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "Felix 2.0+"
|
||||
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
||||
#undef HEATER_1_PIN
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Gen3 Monolithic"
|
||||
#define DEBUG_PIN 0
|
||||
|
||||
// x axis
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Gen3+"
|
||||
|
||||
#define X_STEP_PIN 15
|
||||
#define X_DIR_PIN 18
|
||||
#define X_STOP_PIN 20
|
||||
|
|
|
@ -30,6 +30,10 @@
|
|||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "Gen6"
|
||||
#endif
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 15
|
||||
#define X_DIR_PIN 18
|
||||
|
|
|
@ -24,4 +24,6 @@
|
|||
* Gen6 Deluxe pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "Gen6 Deluxe"
|
||||
|
||||
#include "pins_GEN6.h"
|
||||
|
|
|
@ -28,6 +28,10 @@
|
|||
#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "Gen7 v1.1 / 1.2"
|
||||
#endif
|
||||
|
||||
#ifndef GEN7_VERSION
|
||||
#define GEN7_VERSION 12 // v1.x
|
||||
#endif
|
||||
|
|
|
@ -24,7 +24,7 @@
|
|||
* Gen7 v1.3 pin assignments
|
||||
*/
|
||||
|
||||
#define MOTHERBOARD BOARD_GEN7_12
|
||||
#define GEN7_VERSION 13 // v1.3
|
||||
#define BOARD_NAME "Gen7 v1.3"
|
||||
|
||||
#define GEN7_VERSION 13 // v1.3
|
||||
#include "pins_GEN7_12.h"
|
||||
|
|
|
@ -24,12 +24,14 @@
|
|||
* Gen7 v1.4 pin assignments
|
||||
*/
|
||||
|
||||
#define GEN7_VERSION 14 // v1.4
|
||||
|
||||
#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega644__) && !defined(__AVR_ATmega1284P__)
|
||||
#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Gen7 v1.4"
|
||||
|
||||
#define GEN7_VERSION 14 // v1.4
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 29
|
||||
#define X_DIR_PIN 28
|
||||
|
|
|
@ -31,6 +31,8 @@
|
|||
#error "Oops! Make sure you have 'Gen7' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Gen7 Custom"
|
||||
|
||||
//x axis pins
|
||||
#define X_STEP_PIN 21 // different from standard GEN7
|
||||
#define X_DIR_PIN 20 // different from standard GEN7
|
||||
|
|
|
@ -25,10 +25,8 @@
|
|||
* Identical to 3DRAG
|
||||
*/
|
||||
|
||||
#include "pins_3DRAG.h"
|
||||
|
||||
#undef DEFAULT_MACHINE_NAME
|
||||
#define BOARD_NAME "Velleman K8200"
|
||||
#define DEFAULT_MACHINE_NAME "K8200"
|
||||
|
||||
#undef DEFAULT_SOURCE_CODE_URL
|
||||
#define DEFAULT_SOURCE_CODE_URL "https://github.com/CONSULitAS/Marlin-K8200"
|
||||
|
||||
#include "pins_3DRAG.h"
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Leapfrog"
|
||||
|
||||
#define X_STEP_PIN 28
|
||||
#define X_DIR_PIN 63
|
||||
#define X_ENABLE_PIN 29
|
||||
|
|
|
@ -32,6 +32,8 @@
|
|||
#error "Mega Controller supports up to 2 extruders. Comment this line to keep going."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Mega Controller"
|
||||
|
||||
#define SERVO0_PIN 30
|
||||
#define SERVO1_PIN 31
|
||||
#define SERVO2_PIN 32
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Megatronics"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 26
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Megatronics v2.0"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 26
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Megatronics v3.0"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#if ENABLED(Z_PROBE_SLED)
|
||||
|
|
|
@ -24,10 +24,11 @@
|
|||
* Melzi pin assignments
|
||||
*/
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#define BOARD_NAME "Melzi"
|
||||
|
||||
#if defined(__AVR_ATmega1284P__)
|
||||
#define LARGE_FLASH true
|
||||
#endif
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#include "pins_SANGUINOLOLU_11.h"
|
||||
|
|
|
@ -24,12 +24,11 @@
|
|||
* Melzi with ATmega1284 (MaKr3d version) pin assignments
|
||||
*/
|
||||
|
||||
#undef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_MELZI
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#define BOARD_NAME "Melzi ATmega1284"
|
||||
|
||||
#if defined(__AVR_ATmega1284P__)
|
||||
#define LARGE_FLASH true
|
||||
#endif
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#include "pins_SANGUINOLOLU_11.h"
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega 2560 or Rambo' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Mini Rambo"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 37
|
||||
|
|
|
@ -28,6 +28,7 @@
|
|||
#error "Oops! Make sure you have 'Minitronics' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Minitronics v1.0 / v1.1"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 48
|
||||
|
|
|
@ -29,6 +29,8 @@
|
|||
* MKS v1.4 (Extruder, Extruder, Fan, Bed)
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "MKS > v1.3"
|
||||
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
||||
#undef HEATER_1_PIN
|
||||
|
|
|
@ -24,6 +24,8 @@
|
|||
* MKS BASE 1.0 – Arduino Mega2560 with RAMPS v1.4 pin assignments
|
||||
*/
|
||||
|
||||
#define BOARD_NAME "MKS BASE 1.0"
|
||||
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
||||
#undef HEATER_1_PIN
|
||||
|
|
|
@ -55,6 +55,8 @@
|
|||
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu. (Final OMCA board)"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Final OMCA"
|
||||
|
||||
#define X_STEP_PIN 26
|
||||
#define X_DIR_PIN 25
|
||||
#define X_ENABLE_PIN 10
|
||||
|
|
|
@ -54,6 +54,8 @@
|
|||
#error "Oops! Make sure you have 'SanguinoA' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Alpha OMCA"
|
||||
|
||||
#define X_STEP_PIN 21
|
||||
#define X_DIR_PIN 20
|
||||
#define X_ENABLE_PIN 24
|
||||
|
|
|
@ -35,6 +35,7 @@
|
|||
#error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Printrboard"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
// Disable JTAG pins so they can be used for the Extrudrboard
|
||||
|
|
|
@ -35,6 +35,7 @@
|
|||
#error "These Printrboard assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Printrboard Rev F"
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 0
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Rambo"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
// Servo support
|
||||
|
|
|
@ -33,6 +33,9 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#define IS_RAMPS_13
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "RAMPS 1.3"
|
||||
#endif
|
||||
|
||||
#define IS_RAMPS_13
|
||||
#include "pins_RAMPS_14.h"
|
||||
|
|
|
@ -26,6 +26,7 @@
|
|||
* RAMPS_13_EFB (Extruder, Fan, Bed)
|
||||
*/
|
||||
|
||||
#define IS_RAMPS_13
|
||||
#define BOARD_NAME "RAMPS 1.3 EFB"
|
||||
|
||||
#define IS_RAMPS_13
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
|
|
@ -48,6 +48,10 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "RAMPS 1.4"
|
||||
#endif
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#ifdef IS_RAMPS_13
|
||||
|
|
|
@ -26,6 +26,9 @@
|
|||
* RAMPS_14_EFB (Extruder, Fan, Bed)
|
||||
*/
|
||||
|
||||
#define IS_RAMPS_EFB
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "RAMPS 1.4 EFB"
|
||||
#endif
|
||||
|
||||
#define IS_RAMPS_EFB
|
||||
#include "pins_RAMPS_14.h"
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "MEGA/RAMPS <1.2"
|
||||
|
||||
// Uncomment the following line for RAMPS v1.0
|
||||
//#define RAMPS_V_1_0
|
||||
|
||||
|
|
|
@ -26,6 +26,9 @@
|
|||
|
||||
#include "pins_RAMPS_14.h"
|
||||
|
||||
#undef BOARD_NAME
|
||||
#define BOARD_NAME "RigidBoard"
|
||||
|
||||
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
|
||||
#undef Z_MAX_PIN
|
||||
#define Z_MAX_PIN -1
|
||||
|
|
|
@ -26,6 +26,9 @@
|
|||
|
||||
#include "pins_RIGIDBOARD.h"
|
||||
|
||||
#undef BOARD_NAME
|
||||
#define BOARD_NAME "RigidBoard V2"
|
||||
|
||||
// I2C based DAC like on the Printrboard REVF
|
||||
#define DAC_STEPPER_CURRENT
|
||||
// Channels available for DAC, For Rigidboard there are 4
|
||||
|
|
|
@ -33,6 +33,7 @@
|
|||
#endif
|
||||
|
||||
#define DEFAULT_MACHINE_NAME "Rumba"
|
||||
#define BOARD_NAME "Rumba"
|
||||
|
||||
#define X_STEP_PIN 17
|
||||
#define X_DIR_PIN 16
|
||||
|
|
|
@ -26,6 +26,9 @@
|
|||
|
||||
#include "pins_RAMPS_14_EFB.h"
|
||||
|
||||
#undef BOARD_NAME
|
||||
#define BOARD_NAME "Sainsmart"
|
||||
|
||||
#undef FAN_PIN
|
||||
#define FAN_PIN 7 // PART FAN in front of board next to Extruder heat
|
||||
|
||||
|
|
|
@ -28,6 +28,12 @@
|
|||
#error "Oops! Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#ifndef BOARD_NAME
|
||||
#define BOARD_NAME "Sanguinololu <1.2"
|
||||
#endif
|
||||
|
||||
#define IS_MELZI (MB(MELZI) || MB(MELZI_MAKR3D))
|
||||
|
||||
#define X_STEP_PIN 15
|
||||
#define X_DIR_PIN 21
|
||||
#define X_STOP_PIN 18
|
||||
|
@ -43,11 +49,11 @@
|
|||
#define E0_STEP_PIN 1
|
||||
#define E0_DIR_PIN 0
|
||||
|
||||
#if MB(AZTEEG_X1) || MB(STB_11) || MB(MELZI)
|
||||
#if MB(AZTEEG_X1) || MB(STB_11) || IS_MELZI
|
||||
#define FAN_PIN 4 // Works for Panelolu2 too
|
||||
#endif
|
||||
|
||||
#if MB(MELZI)
|
||||
#if IS_MELZI
|
||||
#define LED_PIN 27 // On some broken versions of the Sanguino libraries the pin definitions are wrong, so LED_PIN needs to be 28. But you should upgrade your Sanguino libraries! See #368.
|
||||
#elif MB(STB_11)
|
||||
#define LCD_PIN_BL 17 // LCD backlight LED
|
||||
|
@ -101,7 +107,7 @@
|
|||
|
||||
#if ENABLED(U8GLIB_ST7920) //SPI GLCD 12864 ST7920 ( like [www.digole.com] ) For Melzi V2.0
|
||||
|
||||
#if MB(MELZI) // Melzi board
|
||||
#if IS_MELZI // Melzi board
|
||||
#define LCD_PINS_RS 30 //CS chip select /SS chip slave select
|
||||
#define LCD_PINS_ENABLE 29 //SID (MOSI)
|
||||
#define LCD_PINS_D4 17 //SCK (CLK) clock
|
||||
|
@ -147,7 +153,7 @@
|
|||
#define BTN_EN1 11
|
||||
#define BTN_EN2 10
|
||||
#if ENABLED(LCD_I2C_PANELOLU2)
|
||||
#if MB(MELZI)
|
||||
#if IS_MELZI
|
||||
#define BTN_ENC 29
|
||||
#define LCD_SDSS 30 // Panelolu2 SD card reader rather than the Melzi
|
||||
#else
|
||||
|
|
|
@ -32,10 +32,11 @@
|
|||
* STB_11
|
||||
*/
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#define BOARD_NAME "Sanguinololu 1.2"
|
||||
|
||||
#if defined(__AVR_ATmega1284P__)
|
||||
#define LARGE_FLASH true
|
||||
#endif
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#include "pins_SANGUINOLOLU_11.h"
|
||||
|
|
|
@ -33,6 +33,7 @@
|
|||
|
||||
#define DEFAULT_MACHINE_NAME "SAV MkI"
|
||||
#define DEFAULT_SOURCE_CODE_URL "https://github.com/fmalpartida/Marlin/tree/SAV-MkI-config"
|
||||
#define BOARD_NAME "SAV MkI"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
|
|
|
@ -28,6 +28,8 @@
|
|||
#error "Oops! Make sure you have 'Sethi 3D' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Sethi 3D_1"
|
||||
|
||||
#ifndef GEN7_VERSION
|
||||
#define GEN7_VERSION 12 // v1.x
|
||||
#endif
|
||||
|
|
|
@ -24,10 +24,11 @@
|
|||
* STB V1.1 pin assignments
|
||||
*/
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#define BOARD_NAME "STB V1.1"
|
||||
|
||||
#if defined(__AVR_ATmega1284P__)
|
||||
#define LARGE_FLASH true
|
||||
#endif
|
||||
|
||||
#define SANGUINOLOLU_V_1_2
|
||||
#include "pins_SANGUINOLOLU_11.h"
|
||||
|
|
|
@ -74,6 +74,8 @@
|
|||
// (or build from command line)
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Teensy++2.0"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 28 // 0 Marlin
|
||||
|
|
|
@ -35,6 +35,8 @@
|
|||
#error "These Teensylu assignments depend on traditional Marlin assignments, not AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h"
|
||||
#endif
|
||||
|
||||
#define BOARD_NAME "Teensylu"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
#define X_STEP_PIN 0
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
|
||||
#define DEFAULT_MACHINE_NAME "Ultimaker"
|
||||
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
|
||||
#define BOARD_NAME "Ultimaker 2.x"
|
||||
|
||||
#define X_STEP_PIN 25
|
||||
#define X_DIR_PIN 23
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
|
||||
#define DEFAULT_MACHINE_NAME "Ultimaker"
|
||||
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
|
||||
#define BOARD_NAME "Ultimaker"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
|
|
|
@ -30,6 +30,7 @@
|
|||
|
||||
#define DEFAULT_MACHINE_NAME "Ultimaker"
|
||||
#define DEFAULT_SOURCE_CODE_URL "https://github.com/Ultimaker/Marlin"
|
||||
#define BOARD_NAME "Ultimaker <1.5.4"
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
|
|
|
@ -131,6 +131,12 @@ class PrintCounter: public Stopwatch {
|
|||
*/
|
||||
void showStats();
|
||||
|
||||
/**
|
||||
* @brief Return the currently loaded statistics
|
||||
* @details Return the raw data, in the same structure used internally
|
||||
*/
|
||||
printStatistics getStats() { return this->data; }
|
||||
|
||||
/**
|
||||
* @brief Loop function
|
||||
* @details This function should be called at loop, it will take care of
|
||||
|
|
91
Marlin/thermistornames.h
Normal file
91
Marlin/thermistornames.h
Normal file
|
@ -0,0 +1,91 @@
|
|||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
#undef THERMISTOR_NAME
|
||||
|
||||
// Thermcouples
|
||||
#if THERMISTOR_ID == -3
|
||||
#define THERMISTOR_NAME "MAX31855"
|
||||
#elif THERMISTOR_ID == -2
|
||||
#define THERMISTOR_NAME "MAX6675"
|
||||
#elif THERMISTOR_ID == -1
|
||||
#define THERMISTOR_NAME "AD595"
|
||||
|
||||
// Standard thermistors
|
||||
#elif THERMISTOR_ID == 1
|
||||
#define THERMISTOR_NAME "EPCOS 100K"
|
||||
#elif THERMISTOR_ID == 2
|
||||
#define THERMISTOR_NAME "ATC 204GT-2"
|
||||
#elif THERMISTOR_ID == 3
|
||||
#define THERMISTOR_NAME "Mendel-parts"
|
||||
#elif THERMISTOR_ID == 4
|
||||
#define THERMISTOR_NAME "Generic 10K"
|
||||
#elif THERMISTOR_ID == 5
|
||||
#define THERMISTOR_NAME "ATC 104GT-2"
|
||||
#elif THERMISTOR_ID == 6
|
||||
#define THERMISTOR_NAME "EPCOS (alt)"
|
||||
#elif THERMISTOR_ID == 7
|
||||
#define THERMISTOR_NAME "HW 104LAG"
|
||||
#elif THERMISTOR_ID == 71
|
||||
#define THERMISTOR_NAME "HW 104LAF"
|
||||
#elif THERMISTOR_ID == 8
|
||||
#define THERMISTOR_NAME "E3104FXT"
|
||||
#elif THERMISTOR_ID == 9
|
||||
#define THERMISTOR_NAME "GE AL03006"
|
||||
#elif THERMISTOR_ID == 10
|
||||
#define THERMISTOR_NAME "RS 198-961"
|
||||
#elif THERMISTOR_ID == 11
|
||||
#define THERMISTOR_NAME "1% beta 3950"
|
||||
#elif THERMISTOR_ID == 12
|
||||
#define THERMISTOR_NAME "E3104FXT (alt)"
|
||||
#elif THERMISTOR_ID == 13
|
||||
#define THERMISTOR_NAME "Hisens 3950"
|
||||
#elif THERMISTOR_ID == 20
|
||||
#define THERMISTOR_NAME "PT100 UltiMB"
|
||||
#elif THERMISTOR_ID == 60
|
||||
#define THERMISTOR_NAME "Makers Tool"
|
||||
#elif THERMISTOR_ID == 70
|
||||
#define THERMISTOR_NAME "Hephestos 2"
|
||||
|
||||
// Modified thermistors
|
||||
#elif THERMISTOR_ID == 51
|
||||
#define THERMISTOR_NAME "EPCOS 1K"
|
||||
#elif THERMISTOR_ID == 52
|
||||
#define THERMISTOR_NAME "ATC204GT-2 1K"
|
||||
#elif THERMISTOR_ID == 55
|
||||
#define THERMISTOR_NAME "ATC104GT-2 1K"
|
||||
#elif THERMISTOR_ID == 1047
|
||||
#define THERMISTOR_NAME "PT1000 4K7"
|
||||
#elif THERMISTOR_ID == 1010
|
||||
#define THERMISTOR_NAME "PT1000 1K"
|
||||
#elif THERMISTOR_ID == 147
|
||||
#define THERMISTOR_NAME "PT100 4K7"
|
||||
#elif THERMISTOR_ID == 110
|
||||
#define THERMISTOR_NAME "PT100 1K"
|
||||
|
||||
// Dummies for dev testing
|
||||
#elif THERMISTOR_ID == 998
|
||||
#define THERMISTOR_NAME "Dummy 1"
|
||||
#elif THERMISTOR_ID == 999
|
||||
#define THERMISTOR_NAME "Dummy 2"
|
||||
|
||||
#endif // THERMISTOR_ID
|
|
@ -29,6 +29,10 @@
|
|||
#include "stepper.h"
|
||||
#include "configuration_store.h"
|
||||
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
#include "printcounter.h"
|
||||
#endif
|
||||
|
||||
int plaPreheatHotendTemp;
|
||||
int plaPreheatHPBTemp;
|
||||
int plaPreheatFanSpeed;
|
||||
|
@ -117,6 +121,15 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
|
|||
static void lcd_control_motion_menu();
|
||||
static void lcd_control_volumetric_menu();
|
||||
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
static void lcd_info_stats_menu();
|
||||
#endif
|
||||
static void lcd_info_thermistors_menu();
|
||||
static void lcd_info_board_menu();
|
||||
static void lcd_info_menu();
|
||||
#endif
|
||||
|
||||
#if HAS_LCD_CONTRAST
|
||||
static void lcd_set_contrast();
|
||||
#endif
|
||||
|
@ -189,6 +202,12 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
|
|||
|
||||
/**
|
||||
* START_MENU generates the init code for a menu function
|
||||
*
|
||||
* encoderLine is the position based on the encoder
|
||||
* currentMenuViewOffset is the top menu line to display
|
||||
* _drawLineNr is the index of the LCD line (0-3)
|
||||
* _lineNr is the menu item to draw and process
|
||||
* _menuItemNr is the index of each MENU_ITEM
|
||||
*/
|
||||
#define START_MENU() do { \
|
||||
ENCODER_DIRECTION_MENUS(); \
|
||||
|
@ -242,6 +261,16 @@ uint8_t lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW; // Set when the LCD needs to
|
|||
_MENU_ITEM_PART_2(type, ## args); \
|
||||
} while(0)
|
||||
|
||||
// Used to print static text with no visible cursor.
|
||||
#define STATIC_ITEM(label, args...) \
|
||||
if (_menuItemNr == _lineNr) { \
|
||||
if (encoderLine == _menuItemNr && _menuItemNr < LCD_HEIGHT - 1) \
|
||||
encoderPosition += ENCODER_STEPS_PER_MENU_ITEM; \
|
||||
if (lcdDrawUpdate) \
|
||||
lcd_implementation_drawmenu_static(_drawLineNr, PSTR(label), ## args); \
|
||||
} \
|
||||
_menuItemNr++
|
||||
|
||||
#if ENABLED(ENCODER_RATE_MULTIPLIER)
|
||||
|
||||
//#define ENCODER_RATE_MULTIPLIER_DEBUG // If defined, output the encoder steps per second value
|
||||
|
@ -554,6 +583,10 @@ static void lcd_status_screen() {
|
|||
}
|
||||
#endif //SDSUPPORT
|
||||
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
MENU_ITEM(submenu, MSG_INFO_MENU, lcd_info_menu);
|
||||
#endif
|
||||
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
|
@ -1870,6 +1903,139 @@ static void lcd_status_screen() {
|
|||
|
||||
#endif //SDSUPPORT
|
||||
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
/**
|
||||
*
|
||||
* About Printer > Stastics submenu
|
||||
*
|
||||
*/
|
||||
static void lcd_info_stats_menu() {
|
||||
PrintCounter print_job_counter = PrintCounter();
|
||||
print_job_counter.loadStats();
|
||||
printStatistics stats = print_job_counter.getStats();
|
||||
|
||||
char printTime[6];
|
||||
sprintf(printTime, "%02d:%02d", stats.printTime / 60, stats.printTime % 60);
|
||||
|
||||
if (LCD_CLICKED) lcd_goto_previous_menu(true);
|
||||
START_MENU();
|
||||
STATIC_ITEM(MSG_INFO_TOTAL_PRINTS ": ", itostr3left(stats.totalPrints)); // Total Prints: 999
|
||||
STATIC_ITEM(MSG_INFO_FINISHED_PRINTS ": ", itostr3left(stats.finishedPrints)); // Finished Prints: 666
|
||||
STATIC_ITEM(MSG_INFO_PRINT_TIME ": ", printTime); // Total Print Time: 123456
|
||||
END_MENU();
|
||||
}
|
||||
#endif // PRINTCOUNTER
|
||||
|
||||
/**
|
||||
*
|
||||
* About Printer > Thermistors
|
||||
*
|
||||
*/
|
||||
static void lcd_info_thermistors_menu() {
|
||||
if (LCD_CLICKED) lcd_goto_previous_menu(true);
|
||||
START_MENU();
|
||||
#define THERMISTOR_ID TEMP_SENSOR_0
|
||||
#include "thermistornames.h"
|
||||
STATIC_ITEM("T0: " THERMISTOR_NAME);
|
||||
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_0_MINTEMP));
|
||||
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_0_MAXTEMP));
|
||||
|
||||
#if TEMP_SENSOR_1 != 0
|
||||
#undef THERMISTOR_ID
|
||||
#define THERMISTOR_ID TEMP_SENSOR_1
|
||||
#include "thermistornames.h"
|
||||
STATIC_ITEM("T1: " THERMISTOR_NAME);
|
||||
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_1_MINTEMP));
|
||||
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_1_MAXTEMP));
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_2 != 0
|
||||
#undef THERMISTOR_ID
|
||||
#define THERMISTOR_ID TEMP_SENSOR_2
|
||||
#include "thermistornames.h"
|
||||
STATIC_ITEM("T2: " THERMISTOR_NAME);
|
||||
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_2_MINTEMP));
|
||||
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_2_MAXTEMP));
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_3 != 0
|
||||
#undef THERMISTOR_ID
|
||||
#define THERMISTOR_ID TEMP_SENSOR_3
|
||||
#include "thermistornames.h"
|
||||
STATIC_ITEM("T3: " THERMISTOR_NAME);
|
||||
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(HEATER_3_MINTEMP));
|
||||
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(HEATER_3_MAXTEMP));
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED != 0
|
||||
#undef THERMISTOR_ID
|
||||
#define THERMISTOR_ID TEMP_SENSOR_BED
|
||||
#include "thermistornames.h"
|
||||
STATIC_ITEM("TBed:" THERMISTOR_NAME);
|
||||
STATIC_ITEM(MSG_INFO_MIN_TEMP ": " STRINGIFY(BED_MINTEMP));
|
||||
STATIC_ITEM(MSG_INFO_MAX_TEMP ": " STRINGIFY(BED_MAXTEMP));
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
/**
|
||||
*
|
||||
* About Printer > Board Info
|
||||
*
|
||||
*/
|
||||
static void lcd_info_board_menu() {
|
||||
if (LCD_CLICKED) lcd_goto_previous_menu(true);
|
||||
START_MENU();
|
||||
STATIC_ITEM(BOARD_NAME); // MyPrinterController
|
||||
STATIC_ITEM(MSG_INFO_BAUDRATE ": " STRINGIFY(BAUDRATE)); // Baud: 250000
|
||||
STATIC_ITEM(MSG_INFO_PROTOCOL ": " PROTOCOL_VERSION); // Protocol: 1.0
|
||||
#ifdef POWER_SUPPLY
|
||||
#if (POWER_SUPPLY == 1)
|
||||
STATIC_ITEM(MSG_INFO_PSU ": ATX"); // Power Supply: ATX
|
||||
#elif (POWER_SUPPLY == 2)
|
||||
STATIC_ITEM(MSG_INFO_PSU ": XBox"); // Power Supply: XBox
|
||||
#endif
|
||||
#endif // POWER_SUPPLY
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
/**
|
||||
*
|
||||
* About Printer > Printer Info
|
||||
*
|
||||
*/
|
||||
static void lcd_info_printer_menu() {
|
||||
if (LCD_CLICKED) lcd_goto_previous_menu(true);
|
||||
START_MENU();
|
||||
STATIC_ITEM(MSG_MARLIN); // Marlin
|
||||
STATIC_ITEM(SHORT_BUILD_VERSION); // x.x.x-Branch
|
||||
STATIC_ITEM(STRING_DISTRIBUTION_DATE); // YYYY-MM-DD HH:MM
|
||||
STATIC_ITEM(MACHINE_NAME); // My3DPrinter
|
||||
STATIC_ITEM(WEBSITE_URL); // www.my3dprinter.com
|
||||
STATIC_ITEM(MSG_INFO_EXTRUDERS ": " STRINGIFY(EXTRUDERS)); // Extruders: 2
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
/**
|
||||
*
|
||||
* "About Printer" submenu
|
||||
*
|
||||
*/
|
||||
static void lcd_info_menu() {
|
||||
START_MENU();
|
||||
MENU_ITEM(back, MSG_MAIN);
|
||||
MENU_ITEM(submenu, MSG_INFO_PRINTER_MENU, lcd_info_printer_menu); // Printer Info >
|
||||
MENU_ITEM(submenu, MSG_INFO_BOARD_MENU, lcd_info_board_menu); // Board Info >
|
||||
MENU_ITEM(submenu, MSG_INFO_THERMISTOR_MENU, lcd_info_thermistors_menu); // Thermistors >
|
||||
#if ENABLED(PRINTCOUNTER)
|
||||
MENU_ITEM(submenu, MSG_INFO_STATS_MENU, lcd_info_stats_menu); // Printer Statistics >
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
#endif // LCD_INFO_MENU
|
||||
|
||||
/**
|
||||
*
|
||||
* Functions for editing single values
|
||||
|
@ -2573,7 +2739,6 @@ char *ftostr4sign(const float& x) { return itostr4sign((int)x); }
|
|||
|
||||
// Convert unsigned int to string with 12 format
|
||||
char* itostr2(const uint8_t& x) {
|
||||
//sprintf(conv,"%5.1f",x);
|
||||
int xx = x;
|
||||
conv[0] = DIGIMOD(xx / 10);
|
||||
conv[1] = DIGIMOD(xx);
|
||||
|
|
|
@ -815,6 +815,29 @@ static void lcd_implementation_status_screen() {
|
|||
lcd_print(lcd_status_message);
|
||||
}
|
||||
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
|
||||
static void lcd_implementation_drawmenu_static(uint8_t row, const char* pstr, const char *valstr=NULL, bool center=true) {
|
||||
char c;
|
||||
int8_t n = LCD_WIDTH;
|
||||
lcd.setCursor(0, row);
|
||||
if (center) {
|
||||
int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2;
|
||||
while (--pad >= 0) { lcd.print(' '); n--; }
|
||||
}
|
||||
while ((c = pgm_read_byte(pstr)) && n > 0) {
|
||||
n -= lcd_print(c);
|
||||
pstr++;
|
||||
}
|
||||
if (valstr) {
|
||||
lcd_print(valstr);
|
||||
n -= lcd_strlen(valstr);
|
||||
}
|
||||
while (n-- > 0) lcd.print(' ');
|
||||
}
|
||||
|
||||
#endif // LCD_INFO_MENU
|
||||
|
||||
static void lcd_implementation_drawmenu_generic(bool sel, uint8_t row, const char* pstr, char pre_char, char post_char) {
|
||||
char c;
|
||||
uint8_t n = LCD_WIDTH - 2;
|
||||
|
|
Loading…
Reference in a new issue