Fix sanity checks for dual axes (#10633)
This commit is contained in:
Giuliano
Scott Lahteine
parent
a1fab8336e
commit
4e16e699c1
|
|
@ -114,7 +114,7 @@ script:
|
|||
# PROBE_MANUALLY feature, with LCD support,
|
||||
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
|
||||
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
|
||||
# Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
|
||||
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
|
||||
|
|
@ -124,7 +124,7 @@ script:
|
|||
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
- opt_enable ULTIMAKERCONTROLLER SDSUPPORT
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
|
||||
- opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
|
||||
|
|
@ -437,6 +437,7 @@ script:
|
|||
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- pins_set RAMPS X_MAX_PIN -1
|
||||
- opt_add_adv Z2_MAX_PIN 2
|
||||
- opt_enable USE_XMAX_PLUG
|
||||
- build_marlin_pio ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
|
||||
|
||||
#############################
|
||||
|
|
|
|||
|
|
@ -1237,18 +1237,18 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
|||
#if ENABLED(X_DUAL_ENDSTOPS)
|
||||
#if !X2_USE_ENDSTOP
|
||||
#error "You must set X2_USE_ENDSTOP with X_DUAL_ENDSTOPS."
|
||||
#elif X2_USE_ENDSTOP == _X_MIN_ && DISABLED(USE_XMIN_PLUG)
|
||||
#error "USE_XMIN_PLUG is required when X2_USE_ENDSTOP is _X_MIN_."
|
||||
#elif X2_USE_ENDSTOP == _X_MAX_ && DISABLED(USE_XMAX_PLUG)
|
||||
#error "USE_XMAX_PLUG is required when X2_USE_ENDSTOP is _X_MAX_."
|
||||
#elif X2_USE_ENDSTOP == _Y_MIN_ && DISABLED(USE_YMIN_PLUG)
|
||||
#error "USE_YMIN_PLUG is required when X2_USE_ENDSTOP is _Y_MIN_."
|
||||
#elif X2_USE_ENDSTOP == _Y_MAX_ && DISABLED(USE_YMAX_PLUG)
|
||||
#error "USE_YMAX_PLUG is required when X2_USE_ENDSTOP is _Y_MAX_."
|
||||
#elif X2_USE_ENDSTOP == _Z_MIN_ && DISABLED(USE_ZMIN_PLUG)
|
||||
#error "USE_ZMIN_PLUG is required when X2_USE_ENDSTOP is _Z_MIN_."
|
||||
#elif X2_USE_ENDSTOP == _Z_MAX_ && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "USE_ZMAX_PLUG is required when X2_USE_ENDSTOP is _Z_MAX_."
|
||||
#elif X2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
|
||||
#error "USE_XMIN_PLUG is required when X2_USE_ENDSTOP is _XMIN_."
|
||||
#elif X2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
|
||||
#error "USE_XMAX_PLUG is required when X2_USE_ENDSTOP is _XMAX_."
|
||||
#elif X2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
|
||||
#error "USE_YMIN_PLUG is required when X2_USE_ENDSTOP is _YMIN_."
|
||||
#elif X2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
|
||||
#error "USE_YMAX_PLUG is required when X2_USE_ENDSTOP is _YMAX_."
|
||||
#elif X2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
|
||||
#error "USE_ZMIN_PLUG is required when X2_USE_ENDSTOP is _ZMIN_."
|
||||
#elif X2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "USE_ZMAX_PLUG is required when X2_USE_ENDSTOP is _ZMAX_."
|
||||
#elif !HAS_X2_MIN && !HAS_X2_MAX
|
||||
#error "X2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
|
||||
#elif ENABLED(DELTA)
|
||||
|
|
@ -1258,18 +1258,18 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
|||
#if ENABLED(Y_DUAL_ENDSTOPS)
|
||||
#if !Y2_USE_ENDSTOP
|
||||
#error "You must set Y2_USE_ENDSTOP with Y_DUAL_ENDSTOPS."
|
||||
#elif Y2_USE_ENDSTOP == _X_MIN_ && DISABLED(USE_XMIN_PLUG)
|
||||
#error "USE_XMIN_PLUG is required when Y2_USE_ENDSTOP is _X_MIN_."
|
||||
#elif Y2_USE_ENDSTOP == _X_MAX_ && DISABLED(USE_XMAX_PLUG)
|
||||
#error "USE_XMAX_PLUG is required when Y2_USE_ENDSTOP is _X_MAX_."
|
||||
#elif Y2_USE_ENDSTOP == _Y_MIN_ && DISABLED(USE_YMIN_PLUG)
|
||||
#error "USE_YMIN_PLUG is required when Y2_USE_ENDSTOP is _Y_MIN_."
|
||||
#elif Y2_USE_ENDSTOP == _Y_MAX_ && DISABLED(USE_YMAX_PLUG)
|
||||
#error "USE_YMAX_PLUG is required when Y2_USE_ENDSTOP is _Y_MAX_."
|
||||
#elif Y2_USE_ENDSTOP == _Z_MIN_ && DISABLED(USE_ZMIN_PLUG)
|
||||
#error "USE_ZMIN_PLUG is required when Y2_USE_ENDSTOP is _Z_MIN_."
|
||||
#elif Y2_USE_ENDSTOP == _Z_MAX_ && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "USE_ZMAX_PLUG is required when Y2_USE_ENDSTOP is _Z_MAX_."
|
||||
#elif Y2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
|
||||
#error "USE_XMIN_PLUG is required when Y2_USE_ENDSTOP is _XMIN_."
|
||||
#elif Y2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
|
||||
#error "USE_XMAX_PLUG is required when Y2_USE_ENDSTOP is _XMAX_."
|
||||
#elif Y2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
|
||||
#error "USE_YMIN_PLUG is required when Y2_USE_ENDSTOP is _YMIN_."
|
||||
#elif Y2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
|
||||
#error "USE_YMAX_PLUG is required when Y2_USE_ENDSTOP is _YMAX_."
|
||||
#elif Y2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
|
||||
#error "USE_ZMIN_PLUG is required when Y2_USE_ENDSTOP is _ZMIN_."
|
||||
#elif Y2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "USE_ZMAX_PLUG is required when Y2_USE_ENDSTOP is _ZMAX_."
|
||||
#elif !HAS_Y2_MIN && !HAS_Y2_MAX
|
||||
#error "Y2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
|
||||
#elif ENABLED(DELTA)
|
||||
|
|
@ -1279,18 +1279,18 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
|
|||
#if ENABLED(Z_DUAL_ENDSTOPS)
|
||||
#if !Z2_USE_ENDSTOP
|
||||
#error "You must set Z2_USE_ENDSTOP with Z_DUAL_ENDSTOPS."
|
||||
#elif Z2_USE_ENDSTOP == _X_MIN_ && DISABLED(USE_XMIN_PLUG)
|
||||
#error "USE_XMIN_PLUG is required when Z2_USE_ENDSTOP is _X_MIN_."
|
||||
#elif Z2_USE_ENDSTOP == _X_MAX_ && DISABLED(USE_XMAX_PLUG)
|
||||
#error "USE_XMAX_PLUG is required when Z2_USE_ENDSTOP is _X_MAX_."
|
||||
#elif Z2_USE_ENDSTOP == _Y_MIN_ && DISABLED(USE_YMIN_PLUG)
|
||||
#error "USE_YMIN_PLUG is required when Z2_USE_ENDSTOP is _Y_MIN_."
|
||||
#elif Z2_USE_ENDSTOP == _Y_MAX_ && DISABLED(USE_YMAX_PLUG)
|
||||
#error "USE_YMAX_PLUG is required when Z2_USE_ENDSTOP is _Y_MAX_."
|
||||
#elif Z2_USE_ENDSTOP == _Z_MIN_ && DISABLED(USE_ZMIN_PLUG)
|
||||
#error "USE_ZMIN_PLUG is required when Z2_USE_ENDSTOP is _Z_MIN_."
|
||||
#elif Z2_USE_ENDSTOP == _Z_MAX_ && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "USE_ZMAX_PLUG is required when Z2_USE_ENDSTOP is _Z_MAX_."
|
||||
#elif Z2_USE_ENDSTOP == _XMIN_ && DISABLED(USE_XMIN_PLUG)
|
||||
#error "USE_XMIN_PLUG is required when Z2_USE_ENDSTOP is _XMIN_."
|
||||
#elif Z2_USE_ENDSTOP == _XMAX_ && DISABLED(USE_XMAX_PLUG)
|
||||
#error "USE_XMAX_PLUG is required when Z2_USE_ENDSTOP is _XMAX_."
|
||||
#elif Z2_USE_ENDSTOP == _YMIN_ && DISABLED(USE_YMIN_PLUG)
|
||||
#error "USE_YMIN_PLUG is required when Z2_USE_ENDSTOP is _YMIN_."
|
||||
#elif Z2_USE_ENDSTOP == _YMAX_ && DISABLED(USE_YMAX_PLUG)
|
||||
#error "USE_YMAX_PLUG is required when Z2_USE_ENDSTOP is _YMAX_."
|
||||
#elif Z2_USE_ENDSTOP == _ZMIN_ && DISABLED(USE_ZMIN_PLUG)
|
||||
#error "USE_ZMIN_PLUG is required when Z2_USE_ENDSTOP is _ZMIN_."
|
||||
#elif Z2_USE_ENDSTOP == _ZMAX_ && DISABLED(USE_ZMAX_PLUG)
|
||||
#error "USE_ZMAX_PLUG is required when Z2_USE_ENDSTOP is _ZMAX_."
|
||||
#elif !HAS_Z2_MIN && !HAS_Z2_MAX
|
||||
#error "Z2_USE_ENDSTOP has been assigned to a nonexistent endstop!"
|
||||
#elif ENABLED(DELTA)
|
||||
|
|
|
|||
Loading…
Reference in a new issue