diff --git a/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp index bee8caf833..9d5ddd1bd7 100644 --- a/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_AVR/persistent_store_impl.cpp @@ -38,10 +38,10 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { return false; } -bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) { do { uint8_t c = eeprom_read_byte((unsigned char*)pos); - *value = c; + if (writing) *value = c; crc16(crc, &c, 1); pos++; value++; diff --git a/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp index 0239a71638..f5276e045c 100644 --- a/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_DUE/persistent_store_impl.cpp @@ -43,10 +43,10 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { return false; } -bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) { do { uint8_t c = eeprom_read_byte((unsigned char*)pos); - *value = c; + if (writing) *value = c; crc16(crc, &c, 1); pos++; value++; diff --git a/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp index 82fd567ab9..f2f33ba9f1 100644 --- a/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_LPC1768/persistent_store_impl.cpp @@ -128,7 +128,7 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { return (bytes_written != size); // return true for any error } -bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) { UINT bytes_read = 0; FRESULT s; s = f_lseek(&eeprom_file, pos); @@ -140,7 +140,15 @@ bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { SERIAL_PROTOCOLLNPAIR(" f_lseek()=", (int)s); return true; } - s = f_read(&eeprom_file, (void *)value, size, &bytes_read); + if (writing) { + s = f_read(&eeprom_file, (void *)value, size, &bytes_read); + crc16(crc, value, size); + } + else { + uint8_t temp[size]; + s = f_read(&eeprom_file, (void *)temp, size, &bytes_read); + crc16(crc, temp, size); + } if (s) { SERIAL_PROTOCOLPAIR(" read_data(", pos); // This extra chit-chat goes away soon. But it is helpful SERIAL_PROTOCOLPAIR(",", (int)value); // right now to see errors that are happening in the @@ -151,7 +159,6 @@ bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { SERIAL_PROTOCOLLNPAIR("\n bytes_read=", bytes_read); return true; } - crc16(crc, value, size); pos = pos + size; return bytes_read != size; // return true for any error } diff --git a/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp b/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp index d8b013ae6c..dff5122964 100644 --- a/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp +++ b/Marlin/src/HAL/HAL_STM32F1/persistent_store_flash.cpp @@ -93,13 +93,13 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { return true; } -void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { +void read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) { for (uint16_t i = 0; i < size; i++) { byte* accessPoint = (byte*)(pageBase + pos + i); - value[i] = *accessPoint; + uint8_t c = *accessPoint; + if (writing) value[i] = c; + crc16(crc, &c, 1); } - - crc16(crc, value, size); pos += ((size + 1) & ~1); } diff --git a/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp index b8d7df7e6e..f5c6ec58bd 100644 --- a/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_STM32F1/persistent_store_impl.cpp @@ -62,7 +62,6 @@ bool access_start() { return true; } - bool access_finish(){ if (!card.cardOK) return false; int16_t bytes_written = 0; @@ -81,11 +80,12 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { return false; } -bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) { for (int i = 0; i < size; i++) { - value[i] = HAL_STM32F1_eeprom_content [pos + i]; + uint8_t c = HAL_STM32F1_eeprom_content[pos + i]; + if (writing) value[i] = c`; + crc16(crc, &c, 1); } - crc16(crc, value, size); pos += size; return false; } diff --git a/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp b/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp index f78a8ec4cd..be0604dae2 100644 --- a/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp +++ b/Marlin/src/HAL/HAL_TEENSY35_36/persistent_store_impl.cpp @@ -38,10 +38,10 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) { return false; } -bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc) { +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing/*=true*/) { do { uint8_t c = eeprom_read_byte((unsigned char*)pos); - *value = c; + if (writing) *value = c; crc16(crc, &c, 1); pos++; value++; diff --git a/Marlin/src/HAL/persistent_store_api.h b/Marlin/src/HAL/persistent_store_api.h index ada9e0d88b..642e5712f3 100644 --- a/Marlin/src/HAL/persistent_store_api.h +++ b/Marlin/src/HAL/persistent_store_api.h @@ -10,7 +10,7 @@ namespace PersistentStore { bool access_start(); bool access_finish(); bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc); -bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc); +bool read_data(int &pos, uint8_t* value, uint16_t size, uint16_t *crc, const bool writing=true); } // PersistentStore } // HAL diff --git a/Marlin/src/gcode/eeprom/M500-M503.cpp b/Marlin/src/gcode/eeprom/M500-M504.cpp similarity index 87% rename from Marlin/src/gcode/eeprom/M500-M503.cpp rename to Marlin/src/gcode/eeprom/M500-M504.cpp index 45faa10179..74140eee15 100644 --- a/Marlin/src/gcode/eeprom/M500-M503.cpp +++ b/Marlin/src/gcode/eeprom/M500-M504.cpp @@ -55,3 +55,15 @@ void GcodeSuite::M502() { } #endif // !DISABLE_M503 + +#if ENABLED(EEPROM_SETTINGS) + /** + * M504: Validate EEPROM Contents + */ + void GcodeSuite::M504() { + if (settings.validate()) { + SERIAL_ECHO_START(); + SERIAL_ECHOLNPGM("EEPROM OK"); + } + } +#endif diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index 31d628d859..70e396f4ab 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -610,6 +610,9 @@ void GcodeSuite::process_parsed_command() { #if DISABLED(DISABLE_M503) case 503: M503(); break; // M503: print settings currently in memory #endif + #if ENABLED(EEPROM_SETTINGS) + case 504: M504(); break; // M504: Validate EEPROM contents + #endif #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) case 540: M540(); break; // M540: Set abort on endstop hit for SD printing diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 377c948b68..823ba44d62 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -681,6 +681,9 @@ private: #if DISABLED(DISABLE_M503) static void M503(); #endif + #if ENABLED(EEPROM_SETTINGS) + static void M504(); + #endif #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) static void M540(); diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp index 57a12f3223..4415a043a6 100644 --- a/Marlin/src/module/configuration_store.cpp +++ b/Marlin/src/module/configuration_store.cpp @@ -289,12 +289,13 @@ void MarlinSettings::postprocess() { #define EEPROM_FINISH() HAL::PersistentStore::access_finish() #define EEPROM_SKIP(VAR) eeprom_index += sizeof(VAR) #define EEPROM_WRITE(VAR) HAL::PersistentStore::write_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) - #define EEPROM_READ(VAR) HAL::PersistentStore::read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) + #define EEPROM_READ(VAR) HAL::PersistentStore::read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc, !validating) + #define EEPROM_READ_ALWAYS(VAR) HAL::PersistentStore::read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc) #define EEPROM_ASSERT(TST,ERR) if (!(TST)) do{ SERIAL_ERROR_START(); SERIAL_ERRORLNPGM(ERR); eeprom_read_error = true; }while(0) const char version[4] = EEPROM_VERSION; - bool MarlinSettings::eeprom_error; + bool MarlinSettings::eeprom_error, MarlinSettings::validating; #if ENABLED(AUTO_BED_LEVELING_UBL) int16_t MarlinSettings::meshes_begin; @@ -718,6 +719,9 @@ void MarlinSettings::postprocess() { for (uint8_t q = MAX_EXTRUDERS * 2; q--;) EEPROM_WRITE(dummy); #endif + // + // Validate CRC + // if (!eeprom_error) { #if ENABLED(EEPROM_CHITCHAT) const int eeprom_size = eeprom_index; @@ -741,6 +745,9 @@ void MarlinSettings::postprocess() { } EEPROM_FINISH(); + // + // UBL Mesh + // #if ENABLED(UBL_SAVE_ACTIVE_ON_M500) if (ubl.storage_slot >= 0) store_mesh(ubl.storage_slot); @@ -752,16 +759,16 @@ void MarlinSettings::postprocess() { /** * M501 - Retrieve Configuration */ - bool MarlinSettings::load() { + bool MarlinSettings::_load() { uint16_t working_crc = 0; EEPROM_START(); char stored_ver[4]; - EEPROM_READ(stored_ver); + EEPROM_READ_ALWAYS(stored_ver); uint16_t stored_crc; - EEPROM_READ(stored_crc); + EEPROM_READ_ALWAYS(stored_crc); // Version has to match or defaults are used if (strncmp(version, stored_ver, 3) != 0) { @@ -775,7 +782,8 @@ void MarlinSettings::postprocess() { SERIAL_ECHOPAIR("(EEPROM=", stored_ver); SERIAL_ECHOLNPGM(" Marlin=" EEPROM_VERSION ")"); #endif - reset(); + if (!validating) reset(); + eeprom_error = true; } else { float dummy = 0; @@ -787,7 +795,7 @@ void MarlinSettings::postprocess() { // Number of esteppers may change uint8_t esteppers; - EEPROM_READ(esteppers); + EEPROM_READ_ALWAYS(esteppers); // // Planner Motion @@ -802,7 +810,7 @@ void MarlinSettings::postprocess() { EEPROM_READ(tmp1); EEPROM_READ(tmp2); EEPROM_READ(tmp3); - LOOP_XYZE_N(i) { + if (!validating) LOOP_XYZE_N(i) { planner.axis_steps_per_mm[i] = i < XYZ + esteppers ? tmp1[i] : def1[i < COUNT(def1) ? i : COUNT(def1) - 1]; planner.max_feedrate_mm_s[i] = i < XYZ + esteppers ? tmp2[i] : def2[i < COUNT(def2) ? i : COUNT(def2) - 1]; planner.max_acceleration_mm_per_s2[i] = i < XYZ + esteppers ? tmp3[i] : def3[i < COUNT(def3) ? i : COUNT(def3) - 1]; @@ -851,21 +859,23 @@ void MarlinSettings::postprocess() { bool leveling_is_on; uint8_t mesh_num_x, mesh_num_y; - EEPROM_READ(leveling_is_on); + EEPROM_READ_ALWAYS(leveling_is_on); EEPROM_READ(dummy); - EEPROM_READ(mesh_num_x); - EEPROM_READ(mesh_num_y); + EEPROM_READ_ALWAYS(mesh_num_x); + EEPROM_READ_ALWAYS(mesh_num_y); #if ENABLED(MESH_BED_LEVELING) - mbl.has_mesh = leveling_is_on; - mbl.z_offset = dummy; + if (!validating) { + mbl.has_mesh = leveling_is_on; + mbl.z_offset = dummy; + } if (mesh_num_x == GRID_MAX_POINTS_X && mesh_num_y == GRID_MAX_POINTS_Y) { // EEPROM data fits the current mesh EEPROM_READ(mbl.z_values); } else { // EEPROM data is stale - mbl.reset(); + if (!validating) mbl.reset(); for (uint16_t q = mesh_num_x * mesh_num_y; q--;) EEPROM_READ(dummy); } #else @@ -893,11 +903,11 @@ void MarlinSettings::postprocess() { // uint8_t grid_max_x, grid_max_y; - EEPROM_READ(grid_max_x); // 1 byte - EEPROM_READ(grid_max_y); // 1 byte + EEPROM_READ_ALWAYS(grid_max_x); // 1 byte + EEPROM_READ_ALWAYS(grid_max_y); // 1 byte #if ENABLED(AUTO_BED_LEVELING_BILINEAR) if (grid_max_x == GRID_MAX_POINTS_X && grid_max_y == GRID_MAX_POINTS_Y) { - set_bed_leveling_enabled(false); + if (!validating) set_bed_leveling_enabled(false); EEPROM_READ(bilinear_grid_spacing); // 2 ints EEPROM_READ(bilinear_start); // 2 ints EEPROM_READ(z_values); // 9 to 256 floats @@ -989,7 +999,7 @@ void MarlinSettings::postprocess() { EEPROM_READ(dummy); // Kp if (e < HOTENDS && dummy != DUMMY_PID_VALUE) { // do not need to scale PID values as the values in EEPROM are already scaled - PID_PARAM(Kp, e) = dummy; + if (!validating) PID_PARAM(Kp, e) = dummy; EEPROM_READ(PID_PARAM(Ki, e)); EEPROM_READ(PID_PARAM(Kd, e)); #if ENABLED(PID_EXTRUSION_SCALING) @@ -1023,7 +1033,7 @@ void MarlinSettings::postprocess() { #if ENABLED(PIDTEMPBED) EEPROM_READ(dummy); // bedKp if (dummy != DUMMY_PID_VALUE) { - thermalManager.bedKp = dummy; + if (!validating) thermalManager.bedKp = dummy; EEPROM_READ(thermalManager.bedKi); EEPROM_READ(thermalManager.bedKd); } @@ -1068,7 +1078,8 @@ void MarlinSettings::postprocess() { for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { EEPROM_READ(dummy); - if (q < COUNT(planner.filament_size)) planner.filament_size[q] = dummy; + if (!validating && q < COUNT(planner.filament_size)) + planner.filament_size[q] = dummy; } #else @@ -1081,55 +1092,48 @@ void MarlinSettings::postprocess() { // // TMC2130 Stepper Current // - - uint16_t val; #if HAS_TRINAMIC + #define SET_CURR(N,Q) stepper##Q.setCurrent(val[N], R_SENSE, HOLD_MULTIPLIER) + uint16_t val[11]; EEPROM_READ(val); - #if X_IS_TRINAMIC - stepperX.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if Y_IS_TRINAMIC - stepperY.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if Z_IS_TRINAMIC - stepperZ.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if X2_IS_TRINAMIC - stepperX2.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if Y2_IS_TRINAMIC - stepperY2.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if Z2_IS_TRINAMIC - stepperZ2.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if E0_IS_TRINAMIC - stepperE0.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if E1_IS_TRINAMIC - stepperE1.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if E2_IS_TRINAMIC - stepperE2.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if E3_IS_TRINAMIC - stepperE3.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif - EEPROM_READ(val); - #if E4_IS_TRINAMIC - stepperE4.setCurrent(val, R_SENSE, HOLD_MULTIPLIER); - #endif + if (!validating) { + #if X_IS_TRINAMIC + SET_CURR(0, X); + #endif + #if Y_IS_TRINAMIC + SET_CURR(1, Y); + #endif + #if Z_IS_TRINAMIC + SET_CURR(2, Z); + #endif + #if X2_IS_TRINAMIC + SET_CURR(3, X2); + #endif + #if Y2_IS_TRINAMIC + SET_CURR(4, Y2); + #endif + #if Z2_IS_TRINAMIC + SET_CURR(5, Z2); + #endif + #if E0_IS_TRINAMIC + SET_CURR(6, E0); + #endif + #if E1_IS_TRINAMIC + SET_CURR(7, E1); + #endif + #if E2_IS_TRINAMIC + SET_CURR(8, E2); + #endif + #if E3_IS_TRINAMIC + SET_CURR(9, E3); + #endif + #if E4_IS_TRINAMIC + SET_CURR(10, E4); + #endif + } #else - for (uint8_t q = 11; q--;) EEPROM_READ(val); + uint16_t val; + for (uint8_t q=11; q--;) EEPROM_READ(val); #endif /* @@ -1140,19 +1144,23 @@ void MarlinSettings::postprocess() { int16_t thrs; #if ENABLED(SENSORLESS_HOMING) EEPROM_READ(thrs); - #if ENABLED(X_IS_TMC2130) - stepperX.sgt(thrs); - #endif - #if ENABLED(X2_IS_TMC2130) - stepperX2.sgt(thrs); - #endif + if (!validating) { + #if ENABLED(X_IS_TMC2130) + stepperX.sgt(thrs); + #endif + #if ENABLED(X2_IS_TMC2130) + stepperX2.sgt(thrs); + #endif + } EEPROM_READ(thrs); - #if ENABLED(Y_IS_TMC2130) - stepperY.sgt(thrs); - #endif - #if ENABLED(Y2_IS_TMC2130) - stepperY2.sgt(thrs); - #endif + if (!validating) { + #if ENABLED(Y_IS_TMC2130) + stepperY.sgt(thrs); + #endif + #if ENABLED(Y2_IS_TMC2130) + stepperY2.sgt(thrs); + #endif + } #else for (uint8_t q = 0; q < 2; q++) EEPROM_READ(thrs); #endif @@ -1185,7 +1193,7 @@ void MarlinSettings::postprocess() { // #if ENABLED(CNC_COORDINATE_SYSTEMS) - (void)gcode.select_coordinate_system(-1); // Go back to machine space + if (!validating) (void)gcode.select_coordinate_system(-1); // Go back to machine space EEPROM_READ(gcode.coordinate_system); // 27 floats #else for (uint8_t q = 27; q--;) EEPROM_READ(dummy); @@ -1215,25 +1223,27 @@ void MarlinSettings::postprocess() { #if ENABLED(ADVANCED_PAUSE_FEATURE) for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { EEPROM_READ(dummy); - if (q < COUNT(filament_change_unload_length)) filament_change_unload_length[q] = dummy; + if (!validating && q < COUNT(filament_change_unload_length)) filament_change_unload_length[q] = dummy; } for (uint8_t q = 0; q < MAX_EXTRUDERS; q++) { EEPROM_READ(dummy); - if (q < COUNT(filament_change_load_length)) filament_change_load_length[q] = dummy; + if (!validating && q < COUNT(filament_change_load_length)) filament_change_load_length[q] = dummy; } #else for (uint8_t q = MAX_EXTRUDERS * 2; q--;) EEPROM_READ(dummy); #endif if (working_crc == stored_crc) { - postprocess(); - #if ENABLED(EEPROM_CHITCHAT) - SERIAL_ECHO_START(); - SERIAL_ECHO(version); - SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET)); - SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc); - SERIAL_ECHOLNPGM(")"); - #endif + if (!validating) { + postprocess(); + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHO_START(); + SERIAL_ECHO(version); + SERIAL_ECHOPAIR(" stored settings retrieved (", eeprom_index - (EEPROM_OFFSET)); + SERIAL_ECHOPAIR(" bytes; crc ", (uint32_t)working_crc); + SERIAL_ECHOLNPGM(")"); + #endif + } } else { #if ENABLED(EEPROM_CHITCHAT) @@ -1253,46 +1263,62 @@ void MarlinSettings::postprocess() { // disrupting the mesh data ubl.report_state(); - if (!ubl.sanity_check()) { - SERIAL_EOL(); - #if ENABLED(EEPROM_CHITCHAT) - ubl.echo_name(); - SERIAL_ECHOLNPGM(" initialized.\n"); - #endif - } - else { - #if ENABLED(EEPROM_CHITCHAT) - SERIAL_PROTOCOLPGM("?Can't enable "); - ubl.echo_name(); - SERIAL_PROTOCOLLNPGM("."); - #endif - ubl.reset(); - } + if (!validating) { + if (!ubl.sanity_check()) { + SERIAL_EOL(); + #if ENABLED(EEPROM_CHITCHAT) + ubl.echo_name(); + SERIAL_ECHOLNPGM(" initialized.\n"); + #endif + } + else { + eeprom_error = true; + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_PROTOCOLPGM("?Can't enable "); + ubl.echo_name(); + SERIAL_PROTOCOLLNPGM("."); + #endif + ubl.reset(); + } - if (ubl.storage_slot >= 0) { - load_mesh(ubl.storage_slot); - #if ENABLED(EEPROM_CHITCHAT) - SERIAL_ECHOPAIR("Mesh ", ubl.storage_slot); - SERIAL_ECHOLNPGM(" loaded from storage."); - #endif - } - else { - ubl.reset(); - #if ENABLED(EEPROM_CHITCHAT) - SERIAL_ECHOLNPGM("UBL System reset()"); - #endif + if (ubl.storage_slot >= 0) { + load_mesh(ubl.storage_slot); + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHOPAIR("Mesh ", ubl.storage_slot); + SERIAL_ECHOLNPGM(" loaded from storage."); + #endif + } + else { + ubl.reset(); + #if ENABLED(EEPROM_CHITCHAT) + SERIAL_ECHOLNPGM("UBL System reset()"); + #endif + } } #endif } #if ENABLED(EEPROM_CHITCHAT) && DISABLED(DISABLE_M503) - report(); + if (!validating) report(); #endif EEPROM_FINISH(); return !eeprom_error; } + bool MarlinSettings::validate() { + validating = true; + const bool success = _load(); + validating = false; + return success; + } + + bool MarlinSettings::load() { + if (validate()) return _load(); + reset(); + return true; + } + #if ENABLED(AUTO_BED_LEVELING_UBL) #if ENABLED(EEPROM_CHITCHAT) diff --git a/Marlin/src/module/configuration_store.h b/Marlin/src/module/configuration_store.h index d27f374f93..56fd3c2bad 100644 --- a/Marlin/src/module/configuration_store.h +++ b/Marlin/src/module/configuration_store.h @@ -30,7 +30,7 @@ class MarlinSettings { MarlinSettings() { } static void reset(); - static bool save(); + static bool save(); // Return 'true' if data was saved FORCE_INLINE static bool init_eeprom() { bool success = true; @@ -48,7 +48,8 @@ class MarlinSettings { } #if ENABLED(EEPROM_SETTINGS) - static bool load(); + static bool load(); // Return 'true' if data was loaded ok + static bool validate(); // Return 'true' if EEPROM data is ok #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system // That can store is enabled @@ -77,7 +78,8 @@ class MarlinSettings { static void postprocess(); #if ENABLED(EEPROM_SETTINGS) - static bool eeprom_error; + + static bool eeprom_error, validating; #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system // That can store is enabled @@ -87,6 +89,7 @@ class MarlinSettings { #endif + static bool _load(); #endif };