Improved EEPROM boot error (#17916)

Marlin/src/lcd/language/language_en.h

@@ -328,9 +328,9 @@ namespace Language_en {
   PROGMEM Language_Str MSG_LOAD_EEPROM                     = _UxGT("Load Settings");
   PROGMEM Language_Str MSG_RESTORE_DEFAULTS                = _UxGT("Restore Defaults");
   PROGMEM Language_Str MSG_INIT_EEPROM                     = _UxGT("Initialize EEPROM");
-  PROGMEM Language_Str MSG_ERR_EEPROM_CRC                  = _UxGT("Err: EEPROM CRC");
+  PROGMEM Language_Str MSG_ERR_EEPROM_CRC                  = _UxGT("EEPROM CRC Error");
-  PROGMEM Language_Str MSG_ERR_EEPROM_INDEX                = _UxGT("Err: EEPROM Index");
+  PROGMEM Language_Str MSG_ERR_EEPROM_INDEX                = _UxGT("EEPROM Index Error");
-  PROGMEM Language_Str MSG_ERR_EEPROM_VERSION              = _UxGT("Err: EEPROM Version");
+  PROGMEM Language_Str MSG_ERR_EEPROM_VERSION              = _UxGT("EEPROM Version Error");
   PROGMEM Language_Str MSG_SETTINGS_STORED                 = _UxGT("Settings Stored");
   PROGMEM Language_Str MSG_MEDIA_UPDATE                    = _UxGT("Media Update");
   PROGMEM Language_Str MSG_RESET_PRINTER                   = _UxGT("Reset Printer");
@@ -344,6 +344,7 @@ namespace Language_en {
   PROGMEM Language_Str MSG_BUTTON_STOP                     = _UxGT("Stop");
   PROGMEM Language_Str MSG_BUTTON_PRINT                    = _UxGT("Print");
   PROGMEM Language_Str MSG_BUTTON_RESET                    = _UxGT("Reset");
+  PROGMEM Language_Str MSG_BUTTON_IGNORE                   = _UxGT("Ignore");
   PROGMEM Language_Str MSG_BUTTON_CANCEL                   = _UxGT("Cancel");
   PROGMEM Language_Str MSG_BUTTON_DONE                     = _UxGT("Done");
   PROGMEM Language_Str MSG_BUTTON_BACK                     = _UxGT("Back");

Marlin/src/lcd/menu/menu.cpp

@@ -34,10 +34,6 @@
   #include "../../libs/buzzer.h"
 #endif
 
-#if ENABLED(EEPROM_SETTINGS)
-  #include "../../module/configuration_store.h"
-#endif
-
 #if WATCH_HOTENDS || WATCH_BED
   #include "../../module/temperature.h"
 #endif
@@ -228,7 +224,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
         if (on_status_screen())
           doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL;
       }
-      else if (screen == status_screen && currentScreen == menu_main && PENDING(millis(), doubleclick_expire_ms)) {
+      else if (on_status_screen() && currentScreen == menu_main && PENDING(millis(), doubleclick_expire_ms)) {
         if ( (ENABLED(BABYSTEP_WITHOUT_HOMING) || all_axes_known())
           && (ENABLED(BABYSTEP_ALWAYS_AVAILABLE) || printer_busy()) )
           screen = TERN(BABYSTEP_ZPROBE_OFFSET, lcd_babystep_zoffset, lcd_babystep_z);
@@ -245,7 +241,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
     encoderPosition = encoder;
     encoderTopLine = top;
     screen_items = items;
-    if (screen == status_screen) {
+    if (on_status_screen()) {
       defer_status_screen(false);
       TERN_(AUTO_BED_LEVELING_UBL, ubl.lcd_map_control = false);
       screen_history_depth = 0;
@@ -256,7 +252,7 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co
     // Re-initialize custom characters that may be re-used
     #if HAS_CHARACTER_LCD
       if (TERN1(AUTO_BED_LEVELING_UBL, !ubl.lcd_map_control))
-        set_custom_characters(screen == status_screen ? CHARSET_INFO : CHARSET_MENU);
+        set_custom_characters(on_status_screen() ? CHARSET_INFO : CHARSET_MENU);
     #endif
 
     refresh(LCDVIEW_CALL_REDRAW_NEXT);
@@ -383,11 +379,6 @@ void scroll_screen(const uint8_t limit, const bool is_menu) {
 
 #endif // BABYSTEP_ZPROBE_OFFSET
 
-#if ENABLED(EEPROM_SETTINGS)
-  void lcd_store_settings() { ui.completion_feedback(settings.save()); }
-  void lcd_load_settings()  { ui.completion_feedback(settings.load()); }
-#endif
-
 void _lcd_draw_homing() {
   constexpr uint8_t line = (LCD_HEIGHT - 1) / 2;
   if (ui.should_draw()) MenuItem_static::draw(line, GET_TEXT(MSG_LEVEL_BED_HOMING));
@@ -416,6 +407,7 @@ void MenuItem_confirm::select_screen(PGM_P const yes, PGM_P const no, selectFunc
   if (got_click || ui.should_draw()) {
     draw_select_screen(yes, no, ui_selection, pref, string, suff);
     if (got_click) { ui_selection ? yesFunc() : noFunc(); }
+    ui.defer_status_screen();
   }
 }
 

Marlin/src/lcd/menu/menu.h

@@ -589,11 +589,6 @@ void _lcd_draw_homing();
   #endif
 #endif
 
-#if ENABLED(EEPROM_SETTINGS)
-  void lcd_store_settings();
-  void lcd_load_settings();
-#endif
-
 #if ENABLED(POWER_LOSS_RECOVERY)
   void menu_job_recovery();
 #endif

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -47,7 +47,7 @@
   #include "../../feature/runout.h"
 #endif
 
-#if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
+#if ENABLED(SD_FIRMWARE_UPDATE)
   #include "../../module/configuration_store.h"
 #endif
 
@@ -97,10 +97,6 @@ void menu_cancelobject();
 
 #endif
 
-#if ENABLED(SD_FIRMWARE_UPDATE)
-  #include "../../module/configuration_store.h"
-#endif
-
 #if DISABLED(NO_VOLUMETRICS) || ENABLED(ADVANCED_PAUSE_FEATURE)
   //
   // Advanced Settings > Filament
@@ -591,13 +587,8 @@ void menu_advanced_settings() {
   #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS)
     CONFIRM_ITEM(MSG_INIT_EEPROM,
       MSG_BUTTON_INIT, MSG_BUTTON_CANCEL,
-      []{
+      ui.init_eeprom, ui.goto_previous_screen,
-        const bool inited = settings.init_eeprom();
+      GET_TEXT(MSG_INIT_EEPROM), (const char *)nullptr, PSTR("?")
-        ui.completion_feedback(inited);
-        UNUSED(inited);
-      },
-      ui.goto_previous_screen,
-      GET_TEXT(MSG_INIT_EEPROM), (PGM_P)nullptr, PSTR("?")
     );
   #endif
 

Marlin/src/lcd/menu/menu_bed_corners.cpp

@@ -86,7 +86,7 @@ static inline void _lcd_level_bed_corners_homing() {
             ui.goto_previous_screen_no_defer();
           }
         , GET_TEXT(TERN(LEVEL_CENTER_TOO, MSG_LEVEL_BED_NEXT_POINT, MSG_NEXT_CORNER))
-        , (PGM_P)nullptr, PSTR("?")
+        , (const char*)nullptr, PSTR("?")
       );
     });
     ui.set_selection(true);

Marlin/src/lcd/menu/menu_bed_leveling.cpp

@@ -279,8 +279,8 @@ void menu_bed_leveling() {
   #endif
 
   #if ENABLED(EEPROM_SETTINGS)
-    ACTION_ITEM(MSG_LOAD_EEPROM, lcd_load_settings);
+    ACTION_ITEM(MSG_LOAD_EEPROM, ui.load_settings);
-    ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings);
+    ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
   #endif
   END_MENU();
 }

Marlin/src/lcd/menu/menu_configuration.cpp

@@ -30,8 +30,6 @@
 
 #include "menu.h"
 
-#include "../../module/configuration_store.h"
-
 #if HAS_FILAMENT_SENSOR
   #include "../../feature/runout.h"
 #endif
@@ -174,7 +172,7 @@ void menu_advanced_settings();
     EDIT_ITEM_FAST(float42_52, MSG_HOTEND_OFFSET_Y, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets);
     EDIT_ITEM_FAST(float42_52, MSG_HOTEND_OFFSET_Z, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets);
     #if ENABLED(EEPROM_SETTINGS)
-      ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings);
+      ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
     #endif
     END_MENU();
   }
@@ -335,7 +333,7 @@ void menu_advanced_settings();
       EDIT_ITEM(int3, MSG_BED, &ui.preheat_bed_temp[material], BED_MINTEMP, BED_MAX_TARGET);
     #endif
     #if ENABLED(EEPROM_SETTINGS)
-      ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings);
+      ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
     #endif
     END_MENU();
   }
@@ -439,12 +437,11 @@ void menu_configuration() {
   #endif
 
   #if ENABLED(EEPROM_SETTINGS)
-    ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings);
+    ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
-    if (!busy) ACTION_ITEM(MSG_LOAD_EEPROM, lcd_load_settings);
+    if (!busy) ACTION_ITEM(MSG_LOAD_EEPROM, ui.load_settings);
   #endif
 
-  if (!busy)
+  if (!busy) ACTION_ITEM(MSG_RESTORE_DEFAULTS, ui.reset_settings);
-    ACTION_ITEM(MSG_RESTORE_DEFAULTS, []{ settings.reset(); ui.completion_feedback(); });
 
   END_MENU();
 }

Marlin/src/lcd/menu/menu_delta_calibrate.cpp

@@ -126,8 +126,8 @@ void menu_delta_calibrate() {
   #if ENABLED(DELTA_AUTO_CALIBRATION)
     GCODES_ITEM(MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
     #if ENABLED(EEPROM_SETTINGS)
-      ACTION_ITEM(MSG_STORE_EEPROM, lcd_store_settings);
+      ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings);
-      ACTION_ITEM(MSG_LOAD_EEPROM, lcd_load_settings);
+      ACTION_ITEM(MSG_LOAD_EEPROM, ui.load_settings);
     #endif
   #endif
 

Marlin/src/lcd/menu/menu_main.cpp

@@ -103,7 +103,7 @@ void menu_main() {
         MenuItem_confirm::select_screen(
           GET_TEXT(MSG_BUTTON_STOP), GET_TEXT(MSG_BACK),
           ui.abort_print, ui.goto_previous_screen,
-          GET_TEXT(MSG_STOP_PRINT), (PGM_P)nullptr, PSTR("?")
+          GET_TEXT(MSG_STOP_PRINT), (const char *)nullptr, PSTR("?")
         );
       });
     #endif

Marlin/src/lcd/menu/menu_mixer.cpp

@@ -265,7 +265,7 @@ void menu_mixer() {
       ui.return_to_status();
     },
     ui.goto_previous_screen,
-    GET_TEXT(MSG_RESET_VTOOLS), (PGM_P)nullptr, PSTR("?")
+    GET_TEXT(MSG_RESET_VTOOLS), (const char *)nullptr, PSTR("?")
   );
 
   #if ENABLED(GRADIENT_MIX)

Marlin/src/lcd/ultralcd.cpp

@@ -95,6 +95,7 @@ MarlinUI ui;
 #include "lcdprint.h"
 
 #include "../sd/cardreader.h"
+#include "../module/configuration_store.h"
 #include "../module/temperature.h"
 #include "../module/planner.h"
 #include "../module/motion.h"
@@ -879,11 +880,7 @@ void MarlinUI::update() {
     // This runs every ~100ms when idling often enough.
     // Instead of tracking changes just redraw the Status Screen once per second.
     if (on_status_screen() && !lcd_status_update_delay--) {
-      lcd_status_update_delay = 9
+      lcd_status_update_delay = TERN(HAS_GRAPHICAL_LCD, 12, 9);
-        #if HAS_GRAPHICAL_LCD
-          + 3
-        #endif
-      ;
       max_display_update_time--;
       refresh(LCDVIEW_REDRAW_NOW);
     }
@@ -1167,11 +1164,7 @@ void MarlinUI::update() {
           WRITE(SHIFT_CLK, HIGH);
           WRITE(SHIFT_CLK, LOW);
         }
-        #if ENABLED(REPRAPWORLD_KEYPAD)
+        TERN(REPRAPWORLD_KEYPAD, keypad_buttons, buttons) = ~val;
-          keypad_buttons = ~val;
-        #else
-          buttons = ~val;
-        #endif
       #endif
 
     } // next_button_update_ms
@@ -1238,7 +1231,7 @@ void MarlinUI::update() {
 
   void MarlinUI::finish_status(const bool persist) {
 
-    #if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE > 0))
+    #if !(ENABLED(LCD_PROGRESS_BAR) && (PROGRESS_MSG_EXPIRE) > 0)
       UNUSED(persist);
     #endif
 
@@ -1438,18 +1431,10 @@ void MarlinUI::update() {
   #if HAS_PRINT_PROGRESS
 
     MarlinUI::progress_t MarlinUI::_get_progress() {
-      #if ENABLED(LCD_SET_PROGRESS_MANUALLY)
+      return (
-        const progress_t p = progress_override & PROGRESS_MASK;
+        TERN0(LCD_SET_PROGRESS_MANUALLY, (progress_override & PROGRESS_MASK))
-      #else
-        constexpr progress_t p = 0;
-      #endif
-      return (p
         #if ENABLED(SDSUPPORT)
-          #if HAS_PRINT_PROGRESS_PERMYRIAD
+          ?: TERN(HAS_PRINT_PROGRESS_PERMYRIAD, card.permyriadDone(), card.percentDone())
-            ?: card.permyriadDone()
-          #else
-            ?: card.percentDone()
-          #endif
         #endif
       );
     }
@@ -1461,29 +1446,14 @@ void MarlinUI::update() {
   //
   // Send the status line as a host notification
   //
-
   void MarlinUI::set_status(const char * const message, const bool) {
-    #if ENABLED(HOST_PROMPT_SUPPORT)
+    TERN(HOST_PROMPT_SUPPORT, host_action_notify(message), UNUSED(message));
-      host_action_notify(message);
-    #else
-      UNUSED(message);
-    #endif
   }
-
   void MarlinUI::set_status_P(PGM_P message, const int8_t) {
-    #if ENABLED(HOST_PROMPT_SUPPORT)
+    TERN(HOST_PROMPT_SUPPORT, host_action_notify(message), UNUSED(message));
-      host_action_notify(message);
-    #else
-      UNUSED(message);
-    #endif
   }
-
   void MarlinUI::status_printf_P(const uint8_t, PGM_P const message, ...) {
-    #if ENABLED(HOST_PROMPT_SUPPORT)
+    TERN(HOST_PROMPT_SUPPORT, host_action_notify(message), UNUSED(message));
-      host_action_notify(message);
-    #else
-      UNUSED(message);
-    #endif
   }
 
 #endif // !HAS_DISPLAY
@@ -1507,7 +1477,9 @@ void MarlinUI::update() {
         TERN_(EXTENSIBLE_UI, ExtUI::onMediaRemoved()); // ExtUI response
         #if PIN_EXISTS(SD_DETECT)
           set_status_P(GET_TEXT(MSG_MEDIA_REMOVED));
-          TERN_(HAS_LCD_MENU, return_to_status());
+          #if HAS_LCD_MENU
+            if (!defer_return_to_status) return_to_status();
+          #endif
         #endif
       }
     }
@@ -1530,3 +1502,56 @@ void MarlinUI::update() {
   }
 
 #endif // SDSUPPORT
+
+#if HAS_LCD_MENU
+  void MarlinUI::reset_settings() { settings.reset(); completion_feedback(); }
+#endif
+
+#if ENABLED(EEPROM_SETTINGS)
+
+  #if HAS_LCD_MENU
+    void MarlinUI::init_eeprom() {
+      const bool good = settings.init_eeprom();
+      completion_feedback(good);
+      return_to_status();
+    }
+    void MarlinUI::load_settings() {
+      const bool good = settings.load();
+      completion_feedback(good);
+    }
+    void MarlinUI::store_settings() {
+      const bool good = settings.save();
+      completion_feedback(good);
+    }
+  #endif
+
+  #if DISABLED(EEPROM_AUTO_INIT)
+
+    static inline PGM_P eeprom_err(const uint8_t msgid) {
+      switch (msgid) {
+        default:
+        case 0: return GET_TEXT(MSG_ERR_EEPROM_CRC);
+        case 1: return GET_TEXT(MSG_ERR_EEPROM_INDEX);
+        case 2: return GET_TEXT(MSG_ERR_EEPROM_VERSION);
+      }
+    }
+
+    void MarlinUI::eeprom_alert(const uint8_t msgid) {
+      #if HAS_LCD_MENU
+        editable.uint8 = msgid;
+        goto_screen([]{
+          PGM_P const restore_msg = GET_TEXT(MSG_RESTORE_DEFAULTS);
+          char msg[utf8_strlen_P(restore_msg) + 1];
+          strcpy_P(msg, restore_msg);
+          MenuItem_confirm::select_screen(
+            GET_TEXT(MSG_BUTTON_RESET), GET_TEXT(MSG_BUTTON_IGNORE),
+            init_eeprom, return_to_status,
+            eeprom_err(editable.uint8), msg, PSTR("?")
+          );
+        });
+      #else
+        set_status_P(eeprom_err(msgid));
+      #endif
+    }
+  #endif
+#endif

Marlin/src/lcd/ultralcd.h

@@ -544,14 +544,40 @@ public:
 
   #endif
 
-  #define LCD_HAS_WAIT_FOR_MOVE EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) || (ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
+  //
+  // EEPROM: Reset / Init / Load / Store
+  //
+  #if HAS_LCD_MENU
+    static void reset_settings();
+  #endif
 
-  #if LCD_HAS_WAIT_FOR_MOVE
+  #if ENABLED(EEPROM_SETTINGS)
+    #if HAS_LCD_MENU
+      static void init_eeprom();
+      static void load_settings();
+      static void store_settings();
+    #endif
+    #if DISABLED(EEPROM_AUTO_INIT)
+      static void eeprom_alert(const uint8_t msgid);
+      static inline void eeprom_alert_crc()     { eeprom_alert(0); }
+      static inline void eeprom_alert_index()   { eeprom_alert(1); }
+      static inline void eeprom_alert_version() { eeprom_alert(2); }
+    #endif
+  #endif
+
+  //
+  // Special handling if a move is underway
+  //
+  #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) || (ENABLED(LCD_BED_LEVELING) && EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
+    #define LCD_HAS_WAIT_FOR_MOVE 1
     static bool wait_for_move;
   #else
     static constexpr bool wait_for_move = false;
   #endif
 
+  //
+  // Block interaction while under external control
+  //
   #if HAS_LCD_MENU && EITHER(AUTO_BED_LEVELING_UBL, G26_MESH_VALIDATION)
     static bool external_control;
     FORCE_INLINE static void capture() { external_control = true; }
@@ -615,13 +641,11 @@ private:
   #endif
 
   #if HAS_SPI_LCD
-    #if HAS_LCD_MENU
+    #if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS > 0
-      #if LCD_TIMEOUT_TO_STATUS > 0
       static bool defer_return_to_status;
     #else
       static constexpr bool defer_return_to_status = false;
     #endif
-    #endif
     static void draw_status_screen();
   #endif
 };

Marlin/src/module/configuration_store.cpp

@@ -37,7 +37,7 @@
  */
 
 // Change EEPROM version if the structure changes
-#define EEPROM_VERSION "V78"
+#define EEPROM_VERSION "V79"
 #define EEPROM_OFFSET 100
 
 // Check the integrity of data offsets.
@@ -1367,9 +1367,7 @@ void MarlinSettings::postprocess() {
       }
       DEBUG_ECHO_START();
       DEBUG_ECHOLNPAIR("EEPROM version mismatch (EEPROM=", stored_ver, " Marlin=" EEPROM_VERSION ")");
-      #if HAS_LCD_MENU && DISABLED(EEPROM_AUTO_INIT)
+      TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_version());
-        LCD_MESSAGEPGM(MSG_ERR_EEPROM_VERSION);
-      #endif
       eeprom_error = true;
     }
     else {
@@ -2141,17 +2139,13 @@ void MarlinSettings::postprocess() {
       if (eeprom_error) {
         DEBUG_ECHO_START();
         DEBUG_ECHOLNPAIR("Index: ", int(eeprom_index - (EEPROM_OFFSET)), " Size: ", datasize());
-        #if HAS_LCD_MENU && DISABLED(EEPROM_AUTO_INIT)
+        TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_index());
-          LCD_MESSAGEPGM(MSG_ERR_EEPROM_INDEX);
-        #endif
       }
       else if (working_crc != stored_crc) {
         eeprom_error = true;
         DEBUG_ERROR_START();
         DEBUG_ECHOLNPAIR("EEPROM CRC mismatch - (stored) ", stored_crc, " != ", working_crc, " (calculated)!");
-        #if HAS_LCD_MENU && DISABLED(EEPROM_AUTO_INIT)
+        TERN(EEPROM_AUTO_INIT,,ui.eeprom_alert_crc());
-          LCD_MESSAGEPGM(MSG_ERR_EEPROM_CRC);
-        #endif
       }
       else if (!validating) {
         DEBUG_ECHO_START();