Support for Ramps-S v1.2 (#19815)

This commit is contained in:
TheMichalcinOfficial 2020-10-21 20:44:55 +02:00 committed by Scott Lahteine
parent 2984960793
commit 52bc509fcf
4 changed files with 285 additions and 1 deletions

View file

@ -109,6 +109,9 @@
#define BOARD_COPYMASTER_3D 1153 // Copymaster 3D #define BOARD_COPYMASTER_3D 1153 // Copymaster 3D
#define BOARD_ORTUR_4 1154 // Ortur 4 #define BOARD_ORTUR_4 1154 // Ortur 4
#define BOARD_TENLOG_D3_HERO 1155 // Tenlog D3 Hero IDEX printer #define BOARD_TENLOG_D3_HERO 1155 // Tenlog D3 Hero IDEX printer
#define BOARD_RAMPS_S_12_EEFB 1156 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
#define BOARD_RAMPS_S_12_EEEB 1157 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
#define BOARD_RAMPS_S_12_EFFB 1158 // Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
// //
// RAMBo and derivatives // RAMBo and derivatives

View file

@ -207,6 +207,12 @@
#include "ramps/pins_TENLOG_D3_HERO.h" // ATmega2560 env:mega2560 #include "ramps/pins_TENLOG_D3_HERO.h" // ATmega2560 env:mega2560
#elif MB(MKS_GEN_L_V21) #elif MB(MKS_GEN_L_V21)
#include "ramps/pins_MKS_GEN_L_V21.h" // ATmega2560 env:mega2560 #include "ramps/pins_MKS_GEN_L_V21.h" // ATmega2560 env:mega2560
#elif MB(RAMPS_S_12_EEFB)
#include "ramps/pins_RAMPS_S_12.h" // ATmega2560 env:mega2560
#elif MB(RAMPS_S_12_EEEB)
#include "ramps/pins_RAMPS_S_12.h" // ATmega2560 env:mega2560
#elif MB(RAMPS_S_12_EFFB)
#include "ramps/pins_RAMPS_S_12.h" // ATmega2560 env:mega2560
// //
// RAMBo and derivatives // RAMBo and derivatives

View file

@ -52,7 +52,7 @@
#endif #endif
#if NOT_TARGET(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768, __AVR_ATmega1280__, __AVR_ATmega2560__) #if NOT_TARGET(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768, __AVR_ATmega1280__, __AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'" #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' (or other appropriate target) in 'Tools > Board.'"
#endif #endif
// Custom flags and defines for the build // Custom flags and defines for the build

View file

@ -0,0 +1,275 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Arduino Mega with RAMPS-S v1.2 by Sakul.cz pin assignments
* Written by Michal Rábek <rabek33@gmail.com>
*
* Applies to the following boards:
*
* BOARD_RAMPS_S_12_EEFB Ramps S 1.2 (Hotend0, Hotend1, Fan, Bed)
* BOARD_RAMPS_S_12_EEEB Ramps S 1.2 (Hotend0, Hotend1, Hotend2, Bed)
* BOARD_RAMPS_S_12_EFFB Ramps S 1.2 (Hotend, Fan0, Fan1, Bed)
*
* Other pins_MYBOARD.h files may override these defaults
*/
#if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
// Custom flags and defines for the build
//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "RAMPS S 1.2"
#endif
//
// Servos
//
#ifndef SERVO0_PIN
#define SERVO0_PIN 10
#endif
#ifndef SERVO1_PIN
#define SERVO1_PIN 11
#endif
#ifndef SERVO2_PIN
#define SERVO2_PIN 12
#endif
#ifndef SERVO3_PIN
#define SERVO3_PIN 44
#endif
//
// Limit Switches
//
#ifndef X_STOP_PIN
#ifndef X_MIN_PIN
#define X_MIN_PIN 37
#endif
#ifndef X_MAX_PIN
#define X_MAX_PIN 36
#endif
#endif
#ifndef Y_STOP_PIN
#ifndef Y_MIN_PIN
#define Y_MIN_PIN 35
#endif
#ifndef Y_MAX_PIN
#define Y_MAX_PIN 34
#endif
#endif
#ifndef Z_STOP_PIN
#ifndef Z_MIN_PIN
#define Z_MIN_PIN 33
#endif
#ifndef Z_MAX_PIN
#define Z_MAX_PIN 32
#endif
#endif
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 5
#endif
//
// Filament Runout Sensor
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN 44 // RAMPS_S S3 on the servos connector
#endif
//
// Steppers
//
#define X_STEP_PIN 17
#define X_DIR_PIN 16
#define X_ENABLE_PIN 48
#define Y_STEP_PIN 54
#define Y_DIR_PIN 47
#define Y_ENABLE_PIN 55
#ifndef Z_STEP_PIN
#define Z_STEP_PIN 57
#endif
#define Z_DIR_PIN 56
#define Z_ENABLE_PIN 62
#define E0_STEP_PIN 23
#define E0_DIR_PIN 22
#define E0_ENABLE_PIN 24
#define E1_STEP_PIN 26
#define E1_DIR_PIN 25
#define E1_ENABLE_PIN 27
#define E2_STEP_PIN 29
#define E2_DIR_PIN 28
#define E2_ENABLE_PIN 39
//
// Temperature Sensors
//
#ifndef TEMP_0_PIN
#define TEMP_0_PIN 15 // Analog Input
#endif
#ifndef TEMP_1_PIN
#define TEMP_1_PIN 14 // Analog Input
#endif
#ifndef TEMP_2_PIN
#define TEMP_2_PIN 13 // Analog Input
#endif
#ifndef TEMP_3_PIN
#define TEMP_3_PIN 12 // Analog Input
#endif
#ifndef TEMP_BED_PIN
#define TEMP_BED_PIN 11 // Analog Input
#endif
//
// Heaters / Fans
//
#ifndef MOSFET_D_PIN
#define MOSFET_D_PIN -1
#endif
#ifndef RAMPS_S_HE_0
#define RAMPS_S_HE_0 2
#endif
#ifndef RAMPS_S_HE_1
#define RAMPS_S_HE_1 3
#endif
#ifndef RAMPS_S_HE_2
#define RAMPS_S_HE_2 6
#endif
#define HEATER_BED_PIN 9
#define HEATER_0_PIN RAMPS_S_HE_0
#if MB(RAMPS_S_12_EEFB) // Hotend0, Hotend1, Fan, Bed
#define HEATER_1_PIN RAMPS_S_HE_1
#define FAN_PIN RAMPS_S_HE_2
#elif MB(RAMPS_S_12_EEEB) // Hotend0, Hotend1, Hotend2, Bed
#define HEATER_1_PIN RAMPS_S_HE_1
#define HEATER_2_PIN RAMPS_S_HE_2
#elif MB(RAMPS_S_12_EFFB) // Hotend, Fan0, Fan1, Bed
#define FAN_PIN RAMPS_S_HE_1
#define FAN1_PIN RAMPS_S_HE_2
#endif
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#ifndef KILL_PIN
#define KILL_PIN 46
#endif
#ifndef FILWIDTH_PIN
#define FILWIDTH_PIN 60 // Analog Input on EXTEND
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN 12 // RAMPS_S S2 on the servos connector
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
#if NUM_SERVOS <= 1 // Prefer the servo connector
#define CASE_LIGHT_PIN 12 // Hardware PWM (RAMPS_S S1 on the servos connector)
#elif HAS_FREE_AUX2_PINS
#define CASE_LIGHT_PIN 44 // Hardware PWM
#endif
#endif
//
// M3/M4/M5 - Spindle/Laser Control
//
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
#define SPINDLE_DIR_PIN 5
#endif
//
// TMC software SPI
//
#if ENABLED(TMC_USE_SW_SPI)
#ifndef TMC_SW_MOSI
#define TMC_SW_MOSI 51
#endif
#ifndef TMC_SW_MISO
#define TMC_SW_MISO 50
#endif
#ifndef TMC_SW_SCK
#define TMC_SW_SCK 53
#endif
#endif
//
// Průša i3 MK2 Multiplexer Support
//
#ifndef E_MUX0_PIN
#define E_MUX0_PIN 29 // E2_STEP_PIN
#endif
#ifndef E_MUX1_PIN
#define E_MUX1_PIN 28 // E2_DIR_PIN
#endif
#ifndef E_MUX2_PIN
#define E_MUX2_PIN 39 // E2_ENABLE_PIN
#endif
//////////////////////////
// LCDs and Controllers //
//////////////////////////
//
// LCD Display output pins
//
#if HAS_WIRED_LCD
#define BEEPER_PIN 45
#define LCD_PINS_RS 19
#define LCD_PINS_ENABLE 49
#define LCD_PINS_D4 18
#define LCD_PINS_D5 30
#define LCD_PINS_D6 41
#define LCD_PINS_D7 31
#ifndef SD_DETECT_PIN
#define SD_DETECT_PIN 38
#endif
#endif
//
// LCD Display input pins
//
#if IS_NEWPANEL
#define BTN_EN1 40
#define BTN_EN2 42
#define BTN_ENC 43
#endif