From 536f86e8964193267b9f2d0442ac24bdbdc6b4c6 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Wed, 8 Jul 2015 15:32:03 -0700 Subject: [PATCH] RigidBot CONTROLLERFAN_PIN in Configuration_adv.h --- Marlin/example_configurations/RigidBot/Configuration_adv.h | 2 +- Marlin/pins_RIGIDBOARD.h | 2 -- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index 2a2639a1e6..86721094b0 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -85,7 +85,7 @@ //This is for controlling a fan to cool down the stepper drivers //it will turn on when any driver is enabled //and turn off after the set amount of seconds from last driver being disabled again -#define CONTROLLERFAN_PIN -1 //Pin used for the fan to cool controller (-1 to disable) +#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable) // RigidBot: Fans/Water Pump to cool the hotend cool side. #define CONTROLLERFAN_SECS 60 //How many seconds, after all motors were disabled, the fan should run #define CONTROLLERFAN_SPEED 255 // == full speed diff --git a/Marlin/pins_RIGIDBOARD.h b/Marlin/pins_RIGIDBOARD.h index 9d081ef79e..494e6fcd41 100644 --- a/Marlin/pins_RIGIDBOARD.h +++ b/Marlin/pins_RIGIDBOARD.h @@ -4,8 +4,6 @@ #include "pins_RAMPS_13.h" -#define CONTROLLERFAN_PIN 4 //Pin used for the fan to cool motherboard (-1 to disable) //Fans/Water Pump to cool the hotend cool side. - #ifdef Z_PROBE_ENDSTOP #define Z_PROBE_PIN 19 #endif