Fix and improve Makefile / CMake (#19640)
This commit is contained in:
parent
fde169d3ef
commit
5441ee5a7a
167
Marlin/Makefile
167
Marlin/Makefile
|
@ -22,8 +22,10 @@
|
|||
# (e.g. UPLOAD_PORT = /dev/tty.USB0). If the exact name of this file
|
||||
# changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
|
||||
#
|
||||
# 3. Set the line containing "MCU" to match your board's processor.
|
||||
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
|
||||
# 3. Set the line containing "MCU" to match your board's processor. Set
|
||||
# "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
|
||||
# following command to get a list of correspondences: `avrdude -c alf -p x`
|
||||
# Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
|
||||
# or Diecimila have the atmega168. If you're using a LilyPad Arduino,
|
||||
# change F_CPU to 8000000. If you are using Gen7 electronics, you
|
||||
# probably need to use 20000000. Either way, you must regenerate
|
||||
|
@ -34,18 +36,18 @@
|
|||
# 5. Type "make upload", reset your Arduino board, and press enter to
|
||||
# upload your program to the Arduino board.
|
||||
#
|
||||
# Note that all settings at the top of this file can be overriden from
|
||||
# Note that all settings at the top of this file can be overridden from
|
||||
# the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
|
||||
#
|
||||
# To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
|
||||
#
|
||||
# make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
|
||||
# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
|
||||
# HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
|
||||
#
|
||||
# To compile and upload simply add "upload" to the end of the line...
|
||||
#
|
||||
# make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
|
||||
# HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
|
||||
# HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
|
||||
#
|
||||
# If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
|
||||
# start upload manually (using stk500) like so:
|
||||
|
@ -57,7 +59,26 @@
|
|||
#
|
||||
|
||||
# This defines the board to compile for (see boards.h for your board's ID)
|
||||
HARDWARE_MOTHERBOARD ?= 11
|
||||
HARDWARE_MOTHERBOARD ?= 1020
|
||||
|
||||
ifeq ($(OS),Windows_NT)
|
||||
# Windows
|
||||
ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
|
||||
ARDUINO_USER_DIR ?= ${HOME}/Arduino
|
||||
else
|
||||
UNAME_S := $(shell uname -s)
|
||||
ifeq ($(UNAME_S),Linux)
|
||||
# Linux
|
||||
ARDUINO_INSTALL_DIR ?= /usr/share/arduino
|
||||
ARDUINO_USER_DIR ?= ${HOME}/Arduino
|
||||
endif
|
||||
ifeq ($(UNAME_S),Darwin)
|
||||
# Darwin (macOS)
|
||||
ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
|
||||
ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
|
||||
AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
|
||||
endif
|
||||
endif
|
||||
|
||||
# Arduino source install directory, and version number
|
||||
# On most linuxes this will be /usr/share/arduino
|
||||
|
@ -67,32 +88,38 @@ ARDUINO_VERSION ?= 106
|
|||
# The installed Libraries are in the User folder
|
||||
ARDUINO_USER_DIR ?= ${HOME}/Arduino
|
||||
|
||||
# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
|
||||
# You can optionally set a path to the avr-gcc tools.
|
||||
# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
|
||||
AVR_TOOLS_PATH ?=
|
||||
|
||||
#Programmer configuration
|
||||
# Programmer configuration
|
||||
UPLOAD_RATE ?= 57600
|
||||
AVRDUDE_PROGRAMMER ?= arduino
|
||||
# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
|
||||
# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
|
||||
UPLOAD_PORT ?= /dev/ttyUSB0
|
||||
|
||||
#Directory used to build files in, contains all the build files, from object files to the final hex file
|
||||
#on linux it is best to put an absolute path like /home/username/tmp .
|
||||
# Directory used to build files in, contains all the build files, from object
|
||||
# files to the final hex file on linux it is best to put an absolute path
|
||||
# like /home/username/tmp .
|
||||
BUILD_DIR ?= applet
|
||||
|
||||
# This defines whether Liquid_TWI2 support will be built
|
||||
LIQUID_TWI2 ?= 0
|
||||
|
||||
# this defines if Wire is needed
|
||||
# This defines if Wire is needed
|
||||
WIRE ?= 0
|
||||
|
||||
# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
|
||||
U8GLIB ?= 1
|
||||
# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
|
||||
# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory.
|
||||
TONE ?= 1
|
||||
|
||||
# this defines whether to include the Trinamic TMCStepper library
|
||||
TMC ?= 1
|
||||
# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
|
||||
U8GLIB ?= 0
|
||||
|
||||
# this defines whether to include the AdaFruit NeoPixel library
|
||||
# This defines whether to include the Trinamic TMCStepper library
|
||||
TMC ?= 0
|
||||
|
||||
# This defines whether to include the AdaFruit NeoPixel library
|
||||
NEOPIXEL ?= 0
|
||||
|
||||
############
|
||||
|
@ -208,7 +235,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1119)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
|
||||
MCU ?= atmega1280
|
||||
MCU ?= atmega1280
|
||||
PROG_MCU ?= m1280
|
||||
|
||||
# Azteeg X3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
|
||||
|
@ -350,9 +378,11 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1320)
|
|||
# Minitronics v1.0/1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1400)
|
||||
MCU ?= atmega1281
|
||||
PROG_MCU ?= m1281
|
||||
# Silvergate v1.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1401)
|
||||
MCU ?= atmega1281
|
||||
PROG_MCU ?= m1281
|
||||
|
||||
#
|
||||
# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
|
||||
|
@ -362,46 +392,57 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1401)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1500)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Sanguinololu 1.2 and above
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1501)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Melzi
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1502)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Melzi V2.0
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1503)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# Melzi with ATmega1284 (MaKr3d version)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1504)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# Melzi Creality3D board (for CR-10 etc)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1505)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# Melzi Malyan M150 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1506)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# Tronxy X5S
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1507)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# STB V1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1508)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# Azteeg X1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1509)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
# Anet 1.0 (Melzi clone)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1510)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
|
||||
#
|
||||
# Other ATmega644P, ATmega644, ATmega1284P
|
||||
|
@ -411,50 +452,61 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1510)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1600)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Gen3+
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1601)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Gen6
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1602)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Gen6 deluxe
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1603)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Gen7 custom (Alfons3 Version)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1604)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644
|
||||
PROG_MCU ?= m644
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.1, v1.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1605)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1606)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1607)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega1284p
|
||||
PROG_MCU ?= m1284p
|
||||
F_CPU ?= 20000000
|
||||
# Alpha OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1608)
|
||||
HARDWARE_VARIANT ?= SanguinoA
|
||||
MCU ?= atmega644
|
||||
PROG_MCU ?= m644
|
||||
# Final OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1609)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
# Sethi 3D_1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1610)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
PROG_MCU ?= m644p
|
||||
|
||||
#
|
||||
# Teensyduino - AT90USB1286, AT90USB1286P
|
||||
|
@ -464,51 +516,60 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1610)
|
|||
else ifeq ($(HARDWARE_MOTHERBOARD),1700)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
# Printrboard (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1701)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
# Printrboard Revision F (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1702)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
# Brainwave (AT90USB646)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1703)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb646
|
||||
PROG_MCU ?= usb646
|
||||
# Brainwave Pro (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1704)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
# SAV Mk-I (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1705)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
# Teensy++2.0 (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1706)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
# 5DPrint D8 Driver Board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1707)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
PROG_MCU ?= usb1286
|
||||
|
||||
# UltiMachine Archim1 (with DRV8825 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),3023)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
F_CPU = 84000000
|
||||
IS_MCU = 0
|
||||
# UltiMachine Archim2 (with TMC2130 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),3024)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
F_CPU = 84000000
|
||||
IS_MCU = 0
|
||||
endif
|
||||
|
||||
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
|
||||
# if you are setting this to something other than 16MHz
|
||||
# Do not put the UL suffix, it's done later on.
|
||||
# Set to 16Mhz if not yet set.
|
||||
F_CPU ?= 16000000
|
||||
|
||||
|
@ -518,7 +579,8 @@ IS_MCU ?= 1
|
|||
ifeq ($(IS_MCU),1)
|
||||
# Set to arduino, ATmega2560 if not yet set.
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
MCU ?= atmega2560
|
||||
PROG_MCU ?= m2560
|
||||
|
||||
TOOL_PREFIX = avr
|
||||
MCU_FLAGS = -mmcu=$(MCU)
|
||||
|
@ -549,27 +611,36 @@ VPATH += $(BUILD_DIR)
|
|||
VPATH += $(HARDWARE_SRC)
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
|
||||
# Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
|
||||
# New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
|
||||
endif
|
||||
|
||||
ifeq ($(IS_MCU),1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
|
||||
|
||||
# Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
|
||||
# New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
|
||||
endif
|
||||
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
|
||||
|
||||
ifeq ($(LIQUID_TWI2), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
|
||||
WIRE = 1
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
|
||||
endif
|
||||
ifeq ($(WIRE), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
|
||||
# Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
|
||||
# New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
|
||||
endif
|
||||
ifeq ($(NEOPIXEL), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
|
||||
|
@ -641,13 +712,23 @@ ifeq ($(WIRE), 1)
|
|||
LIB_CXXSRC += Wire.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(TONE), 1)
|
||||
LIB_CXXSRC += Tone.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(U8GLIB), 1)
|
||||
LIB_CXXSRC += U8glib.cpp
|
||||
LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
|
||||
LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
|
||||
u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
|
||||
u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
|
||||
endif
|
||||
|
||||
ifeq ($(TMC), 1)
|
||||
LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
|
||||
LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
|
||||
CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
|
||||
DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
|
||||
SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
|
||||
TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(RELOC_WORKAROUND), 1)
|
||||
|
@ -689,17 +770,23 @@ REMOVE = rm -f
|
|||
MV = mv -f
|
||||
|
||||
# Place -D or -U options here
|
||||
CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
|
||||
CDEFS = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
|
||||
CXXDEFS = $(CDEFS)
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), Teensy)
|
||||
CDEFS += -DUSB_SERIAL
|
||||
CDEFS += -DUSB_SERIAL
|
||||
LIB_SRC += usb.c pins_teensy.c
|
||||
LIB_CXXSRC += usb_api.cpp
|
||||
|
||||
else ifeq ($(HARDWARE_VARIANT), archim)
|
||||
CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
|
||||
LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
|
||||
CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
|
||||
CDEFS += -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON
|
||||
CDEFS += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
|
||||
|
||||
LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
|
||||
UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
|
||||
PluggableUSB.cpp USBCore.cpp
|
||||
|
||||
LIB_SRC += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
|
||||
|
||||
ifeq ($(U8GLIB), 1)
|
||||
|
@ -725,16 +812,20 @@ CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
|
|||
ifneq ($(HARDWARE_MOTHERBOARD),)
|
||||
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
|
||||
endif
|
||||
|
||||
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
|
||||
CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
|
||||
CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA) $(CTUNING) $(CSTANDARD)
|
||||
CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
|
||||
ASFLAGS := $(CDEFS)
|
||||
#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), archim)
|
||||
LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
|
||||
LD_SUFFIX = $(LDLIBS)
|
||||
LDFLAGS = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
|
||||
|
||||
LDFLAGS = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
|
||||
LDFLAGS += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
|
||||
else
|
||||
LD_PREFIX = -Wl,--gc-sections,--relax
|
||||
LDFLAGS = -lm
|
||||
|
@ -750,7 +841,7 @@ else
|
|||
AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
|
||||
endif
|
||||
AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
|
||||
-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
|
||||
-p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
|
||||
-b$(UPLOAD_RATE)
|
||||
|
||||
# Since Marlin 2.0, the source files may be distributed into several
|
||||
|
@ -851,7 +942,7 @@ extcoff: $(TARGET).elf
|
|||
|
||||
.elf.eep:
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
.elf.lss:
|
||||
|
@ -865,7 +956,7 @@ extcoff: $(TARGET).elf
|
|||
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
|
||||
# Object files that were found in "src" will be stored in $(BUILD_DIR)
|
||||
# in directories that mirror the structure of "src"
|
||||
|
|
|
@ -47,8 +47,8 @@ set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} ${CMAKE_CURRENT_LIST_DIR}/marlin-cma
|
|||
# cmake .. -DARDUINO_SDK_PATH="/path/to/arduino-1.x.x" #
|
||||
#====================================================================#
|
||||
#set(ARDUINO_SDK_PATH ${CMAKE_CURRENT_LIST_DIR}/arduino-1.6.8)
|
||||
#set(ARDUINO_SDK_PATH /home/tom/git/BigBox-Dual-Marlin/ArduinoAddons/Arduino_1.6.x)
|
||||
#set(ARDUINO_SDK_PATH /home/tom/test/arduino-1.6.11)
|
||||
#set(ARDUINO_SDK_PATH /Applications/Arduino.app/Contents/Java)
|
||||
#set(ARDUINO_SDK_PATH $HOME/ArduinoAddons/Arduino_1.6.x)
|
||||
#====================================================================#
|
||||
# Set included cmake files #
|
||||
#====================================================================#
|
||||
|
@ -96,8 +96,8 @@ setup_motherboard(${PROJECT_NAME} ${CMAKE_CURRENT_LIST_DIR}/../../../Marlin)
|
|||
# Include Marlin.ino to compile libs not included in *.cpp files #
|
||||
#====================================================================#
|
||||
|
||||
file(GLOB SOURCES "../../../src/*.cpp")
|
||||
set(${PROJECT_NAME}_SRCS "${SOURCES};../../../src/Marlin.ino")
|
||||
file(GLOB_RECURSE SOURCES "../../../Marlin/*.cpp")
|
||||
set(${PROJECT_NAME}_SRCS "${SOURCES};../../../Marlin/Marlin.ino")
|
||||
|
||||
#====================================================================#
|
||||
# Define the port for uploading code to the Arduino #
|
||||
|
|
Loading…
Reference in a new issue