zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Sync config to examples

Browse source
This commit is contained in:
Scott Lahteine 2020-10-05 01:07:41 -05:00 committed by Scott Lahteine
parent cc863ba378
commit 563bd01789
2 changed files with 6 additions and 3 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
Marlin/Configuration.h
View file

@ -486,12 +486,13 @@
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with gcode: M301 E[extruder number, 0-2] // Set/get with gcode: M301 E[extruder number, 0-2]
#if ENABLED(PID_PARAMS_PER_HOTEND) #if ENABLED(PID_PARAMS_PER_HOTEND)
// Specify between 1 and HOTENDS values per array. // Specify between 1 and HOTENDS values per array.
// If fewer than EXTRUDER values are provided, the last element will be repeated. // If fewer than EXTRUDER values are provided, the last element will be repeated.
#define DEFAULT_Kp_LIST { 22.20, 20.0 } #define DEFAULT_Kp_LIST { 22.20, 22.20 }
#define DEFAULT_Ki_LIST { 1.08, 1.0 } #define DEFAULT_Ki_LIST { 1.08, 1.08 }
#define DEFAULT_Kd_LIST { 114.00, 112.0 } #define DEFAULT_Kd_LIST { 114.00, 114.00 }
#else #else
#define DEFAULT_Kp 22.20 #define DEFAULT_Kp 22.20
#define DEFAULT_Ki 1.08 #define DEFAULT_Ki 1.08

2
Marlin/Configuration_adv.h
View file

@ -771,6 +771,7 @@
// //
//#define ASSISTED_TRAMMING //#define ASSISTED_TRAMMING
#if ENABLED(ASSISTED_TRAMMING) #if ENABLED(ASSISTED_TRAMMING)
// Define positions for probing points, use the hotend as reference not the sensor. // Define positions for probing points, use the hotend as reference not the sensor.
#define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } }
@ -793,6 +794,7 @@
* M5: 50 = Clockwise, 51 = Counter-Clockwise * M5: 50 = Clockwise, 51 = Counter-Clockwise
*/ */
#define TRAMMING_SCREW_THREAD 30 #define TRAMMING_SCREW_THREAD 30
#endif #endif
// @section motion // @section motion