Combine Travis tests to shorten required time
This commit is contained in:
Scott Lahteine
parent
0bc66bf22c
commit
570722a0fe
150
.travis.yml
150
.travis.yml
|
|
@ -71,48 +71,15 @@ script:
|
|||
#
|
||||
- build_marlin
|
||||
#
|
||||
# Test heated bed temperature sensor
|
||||
#
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- build_marlin
|
||||
#
|
||||
# Test 2 extruders on basic RAMPS 1.4
|
||||
# Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
|
||||
# plus a "Fix Mounted" Probe with Safe Homing
|
||||
#
|
||||
- opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
|
||||
- opt_set EXTRUDERS 2
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- build_marlin
|
||||
#
|
||||
# Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
|
||||
# Include a test for LIN_ADVANCE here also
|
||||
#
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_set EXTRUDERS 5
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_2 5
|
||||
- opt_set TEMP_SENSOR_3 20
|
||||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable_adv LIN_ADVANCE
|
||||
- build_marlin
|
||||
#
|
||||
# Test PIDTEMPBED
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable PIDTEMPBED
|
||||
- build_marlin
|
||||
#
|
||||
# Test MAX6675
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set TEMP_SENSOR_0 -2
|
||||
- build_marlin
|
||||
#
|
||||
# Test a "Fix Mounted" Probe along with Safe Homing
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
|
||||
- build_marlin
|
||||
#
|
||||
# ...with AUTO_BED_LEVELING_LINEAR, Z_MIN_PROBE_REPEATABILITY_TEST, and DEBUG_LEVELING_FEATURE
|
||||
|
|
@ -151,19 +118,29 @@ script:
|
|||
- opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# Test PROBE_MANUALLY feature, with LCD support
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# Test EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# Test PROBE_MANUALLY feature, with LCD support,
|
||||
# EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
|
||||
# INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
- opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
|
||||
- opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
|
||||
- build_marlin
|
||||
#
|
||||
# Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
|
||||
# Include a test for LIN_ADVANCE here also
|
||||
#
|
||||
- opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
|
||||
- opt_set EXTRUDERS 5
|
||||
- opt_set TEMP_SENSOR_1 1
|
||||
- opt_set TEMP_SENSOR_2 5
|
||||
- opt_set TEMP_SENSOR_3 20
|
||||
- opt_set TEMP_SENSOR_4 999
|
||||
- opt_set TEMP_SENSOR_BED 1
|
||||
- opt_enable_adv LIN_ADVANCE
|
||||
- build_marlin
|
||||
#
|
||||
# Mixing Extruder with 5 steppers
|
||||
#
|
||||
- restore_configs
|
||||
|
|
@ -202,34 +179,19 @@ script:
|
|||
- build_marlin
|
||||
#
|
||||
# Test MINIRAMBO for PWM_MOTOR_CURRENT
|
||||
# ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
|
||||
# PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
|
||||
# Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
|
||||
# FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
|
||||
#
|
||||
- restore_configs
|
||||
- opt_set MOTHERBOARD BOARD_MINIRAMBO
|
||||
- build_marlin
|
||||
#
|
||||
# Test FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, and LCD_INFO_MENU
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable ULTIMAKERCONTROLLER
|
||||
- opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
|
||||
- build_marlin
|
||||
#
|
||||
# Enable filament sensor
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable FILAMENT_WIDTH_SENSOR
|
||||
- build_marlin
|
||||
#
|
||||
# Enable filament sensor with LCD display
|
||||
#
|
||||
- opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY
|
||||
- build_marlin
|
||||
#
|
||||
# Enable BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS, and I2C_SLAVE_ADDRESS
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT
|
||||
- opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
|
||||
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
|
||||
- opt_set_adv I2C_SLAVE_ADDRESS 63
|
||||
- opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
|
||||
- pins_set RAMPS X_MAX_PIN -1
|
||||
- opt_set_adv Z2_MAX_PIN 2
|
||||
- build_marlin
|
||||
#
|
||||
# Enable COREXY
|
||||
|
|
@ -244,34 +206,8 @@ script:
|
|||
- opt_enable COREYX
|
||||
- build_marlin
|
||||
#
|
||||
# Enable Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
|
||||
- pins_set RAMPS X_MAX_PIN -1
|
||||
- opt_set_adv Z2_MAX_PIN 2
|
||||
- build_marlin
|
||||
#
|
||||
# Test PRINTCOUNTER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable PRINTCOUNTER
|
||||
- build_marlin
|
||||
#
|
||||
# Test NOZZLE_PARK_FEATURE
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable NOZZLE_PARK_FEATURE
|
||||
- build_marlin
|
||||
#
|
||||
# Test NOZZLE_CLEAN_FEATURE
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable NOZZLE_CLEAN_FEATURE
|
||||
- build_marlin
|
||||
#
|
||||
#
|
||||
######## STANDARD LCD/PANELS ##############
|
||||
######## Other Standard LCD/Panels ##############
|
||||
#
|
||||
# ULTRA_LCD
|
||||
#
|
||||
|
|
@ -285,18 +221,6 @@ script:
|
|||
- opt_enable DOGLCD
|
||||
- build_marlin
|
||||
#
|
||||
# ULTIMAKERCONTROLLER
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable ULTIMAKERCONTROLLER
|
||||
- build_marlin
|
||||
#
|
||||
# PCA9632
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable PCA9632
|
||||
- build_marlin
|
||||
#
|
||||
# MAKRPANEL
|
||||
# Needs to use Melzi and Sanguino hardware
|
||||
#
|
||||
|
|
@ -310,15 +234,11 @@ script:
|
|||
- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING
|
||||
- build_marlin
|
||||
#
|
||||
# G3D_PANEL
|
||||
# G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
|
||||
#
|
||||
- restore_configs
|
||||
- opt_enable G3D_PANEL SDSUPPORT
|
||||
- build_marlin
|
||||
#
|
||||
# Add SDCARD_SORT_ALPHA, test G3D_PANEL again
|
||||
#
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA
|
||||
- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
|
||||
- opt_set_adv SDSORT_GCODE true
|
||||
- opt_set_adv SDSORT_USES_RAM true
|
||||
- opt_set_adv SDSORT_USES_STACK true
|
||||
|
|
|
|||
Loading…
Reference in a new issue