From 58deab191524dbc230c6a1680204a39ff8880d66 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Mon, 28 Sep 2020 01:13:27 -0500 Subject: [PATCH] Rename LCD conditionals (#19533) --- Marlin/Configuration_adv.h | 10 ++-- Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp | 4 +- .../dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp | 4 +- .../HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp | 4 +- .../dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp | 4 +- Marlin/src/HAL/LINUX/spi_pins.h | 2 +- Marlin/src/HAL/LPC1768/inc/SanityCheck.h | 2 +- Marlin/src/HAL/LPC1768/spi_pins.h | 2 +- .../u8g/u8g_com_HAL_LPC1768_hw_spi.cpp | 4 +- .../u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp | 4 +- .../u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp | 4 +- .../u8g/u8g_com_HAL_LPC1768_sw_spi.cpp | 4 +- .../STM32F1/dogm/u8g_com_stm32duino_swspi.cpp | 4 +- Marlin/src/HAL/shared/HAL_ST7920.h | 2 +- Marlin/src/MarlinCore.cpp | 2 +- Marlin/src/core/language.h | 2 +- Marlin/src/feature/power_monitor.cpp | 4 +- Marlin/src/feature/power_monitor.h | 4 +- Marlin/src/gcode/bedlevel/G26.cpp | 8 ++-- Marlin/src/gcode/calibrate/M48.cpp | 4 +- .../src/gcode/feature/power_monitor/M430.cpp | 2 +- Marlin/src/inc/Conditionals_LCD.h | 8 ++-- Marlin/src/inc/Conditionals_post.h | 12 ++--- Marlin/src/inc/SanityCheck.h | 20 ++++---- Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp | 4 +- Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp | 4 +- Marlin/src/lcd/dogm/lcdprint_u8g.cpp | 4 +- Marlin/src/lcd/dogm/status_screen_DOGM.cpp | 4 +- .../u8g_dev_ssd1306_sh1106_128x64_I2C.cpp | 4 +- .../lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp | 4 +- .../lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp | 4 +- ...8g_dev_tft_320x240_upscale_from_128x64.cpp | 4 +- .../lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp | 4 +- Marlin/src/lcd/dogm/u8g_fontutf8.cpp | 4 +- Marlin/src/lcd/dogm/ultralcd_DOGM.cpp | 4 +- Marlin/src/lcd/fontutils.cpp | 2 +- Marlin/src/lcd/lcdprint.cpp | 4 +- Marlin/src/lcd/lcdprint.h | 2 +- Marlin/src/lcd/menu/menu.cpp | 4 +- Marlin/src/lcd/menu/menu.h | 4 +- Marlin/src/lcd/menu/menu_configuration.cpp | 8 +++- Marlin/src/lcd/menu/menu_media.cpp | 4 +- Marlin/src/lcd/menu/menu_motion.cpp | 2 +- Marlin/src/lcd/menu/menu_tune.cpp | 8 ++-- Marlin/src/lcd/touch/touch_buttons.cpp | 2 +- Marlin/src/lcd/ultralcd.cpp | 28 +++++------ Marlin/src/lcd/ultralcd.h | 22 ++++----- Marlin/src/module/endstops.cpp | 4 +- Marlin/src/module/planner.cpp | 16 +++---- Marlin/src/module/planner.h | 6 +-- Marlin/src/pins/esp32/pins_MRR_ESPE.h | 4 +- Marlin/src/pins/linux/pins_RAMPS_LINUX.h | 4 +- Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h | 6 +-- Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h | 6 +-- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h | 2 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h | 4 +- Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h | 6 +-- Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h | 2 +- Marlin/src/pins/lpc1768/pins_MKS_SBASE.h | 2 +- Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h | 5 +- Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h | 9 ++-- Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h | 4 +- .../src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h | 4 +- .../src/pins/lpc1769/pins_COHESION3D_MINI.h | 4 +- .../src/pins/lpc1769/pins_COHESION3D_REMIX.h | 4 +- Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h | 5 +- Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h | 2 +- Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h | 2 +- Marlin/src/pins/mega/pins_GT2560_REV_A.h | 4 +- Marlin/src/pins/mega/pins_HJC2560C_REV2.h | 4 +- Marlin/src/pins/mega/pins_INTAMSYS40.h | 2 +- Marlin/src/pins/mega/pins_MEGATRONICS_2.h | 4 +- Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h | 4 +- Marlin/src/pins/mega/pins_OVERLORD.h | 2 +- Marlin/src/pins/mega/pins_PICA.h | 2 +- Marlin/src/pins/mega/pins_SILVER_GATE.h | 2 +- Marlin/src/pins/pins.h | 4 +- Marlin/src/pins/rambo/pins_EINSY_RAMBO.h | 4 +- Marlin/src/pins/rambo/pins_EINSY_RETRO.h | 4 +- Marlin/src/pins/rambo/pins_MINIRAMBO.h | 4 +- Marlin/src/pins/rambo/pins_RAMBO.h | 4 +- Marlin/src/pins/ramps/pins_3DRAG.h | 2 +- .../src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h | 2 +- .../src/pins/ramps/pins_FORMBOT_TREX2PLUS.h | 2 +- Marlin/src/pins/ramps/pins_FYSETC_F6_13.h | 2 +- Marlin/src/pins/ramps/pins_K8800.h | 4 +- Marlin/src/pins/ramps/pins_RAMPS.h | 4 +- Marlin/src/pins/ramps/pins_TRIGORILLA_14.h | 4 +- Marlin/src/pins/ramps/pins_TT_OSCAR.h | 2 +- Marlin/src/pins/ramps/pins_ULTIMAKER.h | 4 +- Marlin/src/pins/sam/pins_ARCHIM1.h | 4 +- Marlin/src/pins/sam/pins_ARCHIM2.h | 2 +- Marlin/src/pins/sam/pins_DUE3DOM.h | 4 +- Marlin/src/pins/sam/pins_DUE3DOM_MINI.h | 4 +- Marlin/src/pins/sam/pins_RADDS.h | 4 +- Marlin/src/pins/sam/pins_RAMPS_DUO.h | 4 +- Marlin/src/pins/sam/pins_RAMPS_FD_V1.h | 4 +- Marlin/src/pins/sam/pins_RURAMPS4D_11.h | 4 +- Marlin/src/pins/sam/pins_RURAMPS4D_13.h | 4 +- Marlin/src/pins/samd/pins_RAMPS_144.h | 4 +- Marlin/src/pins/sanguino/pins_ANET_10.h | 2 +- .../src/pins/sanguino/pins_MELZI_CREALITY.h | 2 +- Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h | 2 +- Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h | 2 +- Marlin/src/pins/sanguino/pins_MELZI_V2.h | 2 +- .../src/pins/sanguino/pins_SANGUINOLOLU_11.h | 6 +-- Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h | 4 +- .../stm32f1/pins_BTT_SKR_MINI_E3_common.h | 6 +-- .../src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h | 6 +-- .../src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h | 2 +- Marlin/src/pins/stm32f1/pins_CHITU3D.h | 4 +- Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h | 4 +- Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h | 4 +- Marlin/src/pins/stm32f1/pins_GTM32_MINI.h | 6 +-- Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h | 6 +-- Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h | 6 +-- Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h | 6 +-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h | 4 +- .../pins/stm32f1/pins_MKS_ROBIN_E3_common.h | 4 +- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h | 6 +-- .../src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h | 4 +- .../src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h | 11 +++-- Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h | 2 +- Marlin/src/pins/stm32f1/pins_STM32F1R.h | 4 +- Marlin/src/pins/stm32f1/pins_STM3R_MINI.h | 4 +- Marlin/src/pins/stm32f4/pins_BEAST.h | 4 +- .../src/pins/stm32f4/pins_BTT_BTT002_V1_0.h | 15 +++--- Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h | 16 ++++--- .../pins/stm32f4/pins_BTT_SKR_PRO_common.h | 47 +++++++++++-------- Marlin/src/pins/stm32f4/pins_FYSETC_S6.h | 6 +-- .../src/pins/stm32f4/pins_GENERIC_STM32F4.h | 2 +- Marlin/src/pins/stm32f4/pins_RUMBA32_common.h | 4 +- Marlin/src/pins/stm32f4/pins_VAKE403D.h | 2 +- .../src/pins/teensy2/pins_PRINTRBOARD_REVF.h | 2 +- Marlin/src/pins/teensy3/pins_TEENSY31_32.h | 2 +- Marlin/src/pins/teensy3/pins_TEENSY35_36.h | 2 +- .../PlatformIO/scripts/common-dependencies.h | 2 +- platformio.ini | 10 ++-- 138 files changed, 353 insertions(+), 333 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e35f50fe62..915714039f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -1106,18 +1106,18 @@ #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) #endif -#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && (HAS_GRAPHICAL_LCD || HAS_CHARACTER_LCD) +#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && (HAS_MARLINUI_U8GLIB || HAS_MARLINUI_HD44780) //#define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif - #if HAS_CHARACTER_LCD + #if HAS_MARLINUI_HD44780 //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar @@ -1328,7 +1328,7 @@ * controller events, as there is a trade-off between reliable * printing performance versus fast display updates. */ -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar //#define DOGM_SD_PERCENT @@ -1398,7 +1398,7 @@ //#define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB // // Additional options for DGUS / DWIN displays diff --git a/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp b/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp index c29b195578..cb95a48ccc 100644 --- a/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp +++ b/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp @@ -57,7 +57,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "../shared/Marduino.h" #include "../shared/Delay.h" @@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp index 28e82d70d4..3e7f619997 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp @@ -59,7 +59,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include @@ -145,6 +145,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // __SAM3X8E__ diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp index 54c244d4f6..ea7204fa36 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920) +#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920) #undef SPI_SPEED #define SPI_SPEED 2 // About 2 MHz @@ -144,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void return 1; } -#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920 +#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920 #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp index 960df1bd86..615a386c35 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "../../shared/Delay.h" @@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz } } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/LINUX/spi_pins.h b/Marlin/src/HAL/LINUX/spi_pins.h index a444196f04..01ba28e5b6 100644 --- a/Marlin/src/HAL/LINUX/spi_pins.h +++ b/Marlin/src/HAL/LINUX/spi_pins.h @@ -24,7 +24,7 @@ #include "../../core/macros.h" #include "../../inc/MarlinConfigPre.h" -#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) +#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently // needed due to the speed and mode required for communicating with each device being different. // This requirement can be removed if the SPI access to these devices is updated to use diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h index b6491368cd..fd82e2884a 100644 --- a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h +++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h @@ -113,7 +113,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o #define _IS_RX1_1 IS_RX1 #if IS_TX1(TMC_SW_SCK) #error "Serial port pins (1) conflict with other pins!" - #elif HAS_SPI_LCD + #elif HAS_WIRED_LCD #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1) #error "Serial port pins (1) conflict with Encoder Buttons!" #elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \ diff --git a/Marlin/src/HAL/LPC1768/spi_pins.h b/Marlin/src/HAL/LPC1768/spi_pins.h index 2e6749bf57..b4da5d4df2 100644 --- a/Marlin/src/HAL/LPC1768/spi_pins.h +++ b/Marlin/src/HAL/LPC1768/spi_pins.h @@ -23,7 +23,7 @@ #include "../../core/macros.h" -#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) +#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently // needed due to the speed and mode required for communicating with each device being different. // This requirement can be removed if the SPI access to these devices is updated to use diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp index befc348fab..057e10e0f5 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "../../shared/HAL_SPI.h" @@ -124,6 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp index f03be9ab34..6f7efba4ae 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp @@ -77,7 +77,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include @@ -193,6 +193,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp index 1500c22a0d..592e27f6c0 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "../../shared/HAL_SPI.h" @@ -133,6 +133,6 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp index 4f52f7dd01..ca9d6ecfbe 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920) +#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920) #include @@ -203,5 +203,5 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, return 1; } -#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920 +#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920 #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp index 894abb882a..f88fa88507 100644 --- a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp +++ b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp @@ -20,7 +20,7 @@ #include "../../../inc/MarlinConfig.h" -#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI) +#if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI) #include "../HAL.h" #include @@ -161,5 +161,5 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // STM32F1 diff --git a/Marlin/src/HAL/shared/HAL_ST7920.h b/Marlin/src/HAL/shared/HAL_ST7920.h index 05e8a1f2c5..4e362f96ba 100644 --- a/Marlin/src/HAL/shared/HAL_ST7920.h +++ b/Marlin/src/HAL/shared/HAL_ST7920.h @@ -27,7 +27,7 @@ * (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate. */ -#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI) +#if BOTH(HAS_MARLINUI_U8GLIB, LIGHTWEIGHT_UI) void ST7920_cs(); void ST7920_ncs(); void ST7920_set_cmd(); diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index c6c6ef9b0d..8a425510c0 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -1072,7 +1072,7 @@ void setup() { DWIN_UpdateLCD(); // Show bootscreen (first image) #else SETUP_RUN(ui.init()); - #if HAS_SPI_LCD && ENABLED(SHOW_BOOTSCREEN) + #if HAS_WIRED_LCD && ENABLED(SHOW_BOOTSCREEN) SETUP_RUN(ui.show_bootscreen()); #endif SETUP_RUN(ui.reset_status()); // Load welcome message early. (Retained if no errors exist.) diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h index 0bcf799ac3..ed97e52f89 100644 --- a/Marlin/src/core/language.h +++ b/Marlin/src/core/language.h @@ -303,7 +303,7 @@ #define LCD_STR_C STR_C #define LCD_STR_E STR_E -#if HAS_CHARACTER_LCD +#if HAS_MARLINUI_HD44780 // Custom characters defined in the first 8 characters of the LCD #define LCD_STR_BEDTEMP "\x00" // Print only as a char. This will have 'unexpected' results when used in a string! diff --git a/Marlin/src/feature/power_monitor.cpp b/Marlin/src/feature/power_monitor.cpp index bf5ac748a8..af31d156fc 100644 --- a/Marlin/src/feature/power_monitor.cpp +++ b/Marlin/src/feature/power_monitor.cpp @@ -44,7 +44,7 @@ uint8_t PowerMonitor::display_item; PowerMonitor power_monitor; // Single instance - this calls the constructor -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #if ENABLED(POWER_MONITOR_CURRENT) void PowerMonitor::draw_current() { @@ -70,6 +70,6 @@ PowerMonitor power_monitor; // Single instance - this calls the constructor } #endif -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // HAS_POWER_MONITOR diff --git a/Marlin/src/feature/power_monitor.h b/Marlin/src/feature/power_monitor.h index a86bd07ec4..a0eaf353f4 100644 --- a/Marlin/src/feature/power_monitor.h +++ b/Marlin/src/feature/power_monitor.h @@ -88,8 +88,8 @@ public: FORCE_INLINE static float getPower() { return getAmps() * getVolts(); } #endif - #if HAS_SPI_LCD - #if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI) + #if HAS_WIRED_LCD + #if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI) FORCE_INLINE static bool display_enabled() { return flags != 0x00; } #endif #if ENABLED(POWER_MONITOR_CURRENT) diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp index cd0dbb13cd..c66d4a7d49 100644 --- a/Marlin/src/gcode/bedlevel/G26.cpp +++ b/Marlin/src/gcode/bedlevel/G26.cpp @@ -359,7 +359,7 @@ inline bool turn_on_heaters() { #if HAS_HEATED_BED if (g26_bed_temp > 25) { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99); ui.quick_feedback(); TERN_(HAS_LCD_MENU, ui.capture()); @@ -378,7 +378,7 @@ inline bool turn_on_heaters() { #endif // HAS_HEATED_BED // Start heating the active nozzle - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99); ui.quick_feedback(); #endif @@ -391,7 +391,7 @@ inline bool turn_on_heaters() { #endif )) return G26_ERR; - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.reset_status(); ui.quick_feedback(); #endif @@ -446,7 +446,7 @@ inline bool prime_nozzle() { else #endif { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99); ui.quick_feedback(); #endif diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp index 88273b46e4..8640dfa391 100644 --- a/Marlin/src/gcode/calibrate/M48.cpp +++ b/Marlin/src/gcode/calibrate/M48.cpp @@ -144,7 +144,7 @@ void GcodeSuite::M48() { float sample_sum = 0.0; LOOP_L_N(n, n_samples) { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Display M48 progress in the status bar ui.status_printf_P(0, PSTR(S_FMT ": %d/%d"), GET_TEXT(MSG_M48_POINT), int(n + 1), int(n_samples)); #endif @@ -258,7 +258,7 @@ void GcodeSuite::M48() { SERIAL_ECHOLNPGM("Finished!"); dev_report(verbose_level > 0, mean, sigma, min, max, true); - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Display M48 results in the status bar char sigma_str[8]; ui.status_printf_P(0, PSTR(S_FMT ": %s"), GET_TEXT(MSG_M48_DEVIATION), dtostrf(sigma, 2, 6, sigma_str)); diff --git a/Marlin/src/gcode/feature/power_monitor/M430.cpp b/Marlin/src/gcode/feature/power_monitor/M430.cpp index a669f0a76b..7639ea962d 100644 --- a/Marlin/src/gcode/feature/power_monitor/M430.cpp +++ b/Marlin/src/gcode/feature/power_monitor/M430.cpp @@ -38,7 +38,7 @@ */ void GcodeSuite::M430() { bool do_report = true; - #if HAS_SPI_LCD + #if HAS_WIRED_LCD #if ENABLED(POWER_MONITOR_CURRENT) if (parser.seen('I')) { power_monitor.set_current_display(parser.value_bool()); do_report = false; } #endif diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 95c93beb9e..af8ef73817 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -456,11 +456,11 @@ #endif #if ENABLED(ULTRA_LCD) - #define HAS_SPI_LCD 1 + #define HAS_WIRED_LCD 1 #if ENABLED(DOGLCD) - #define HAS_GRAPHICAL_LCD 1 + #define HAS_MARLINUI_U8GLIB 1 #elif DISABLED(HAS_GRAPHICAL_TFT) - #define HAS_CHARACTER_LCD 1 + #define HAS_MARLINUI_HD44780 1 #endif #endif @@ -471,7 +471,7 @@ #define HAS_ADC_BUTTONS 1 #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef LCD_PIXEL_WIDTH #define LCD_PIXEL_WIDTH 128 #endif diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index c9a29b351c..bf297b633f 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -313,7 +313,7 @@ #elif ENABLED(MAKRPANEL) #define _LCD_CONTRAST_INIT 17 #elif ENABLED(MINIPANEL) - #define _LCD_CONTRAST_INIT 150 + #define _LCD_CONTRAST_INIT 150 #elif ENABLED(ZONESTAR_12864OLED) #define _LCD_CONTRAST_MIN 64 #define _LCD_CONTRAST_INIT 128 @@ -2455,7 +2455,7 @@ */ #if PIN_EXISTS(BEEPER) || EITHER(LCD_USE_I2C_BUZZER, PCA9632_BUZZER) #define HAS_BUZZER 1 - #if NONE(LCD_USE_I2C_BUZZER, PCA9632_BUZZER) + #if PIN_EXISTS(BEEPER) #define USE_BEEPER 1 #endif #endif @@ -2483,7 +2483,7 @@ /** * Make sure DOGLCD_SCK and DOGLCD_MOSI are defined. */ -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef DOGLCD_SCK #define DOGLCD_SCK SCK_PIN #endif @@ -2604,17 +2604,17 @@ #define HAS_FOLDER_SORTING 1 #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // Get LCD character width/height, which may be overridden by pins, configs, etc. #ifndef LCD_WIDTH - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define LCD_WIDTH 21 #else #define LCD_WIDTH TERN(ULTIPANEL, 20, 16) #endif #endif #ifndef LCD_HEIGHT - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define LCD_HEIGHT 5 #else #define LCD_HEIGHT TERN(ULTIPANEL, 4, 2) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 1cb8bcd7e9..7093d25219 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -680,7 +680,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * LCD Info Screen Style */ #if LCD_INFO_SCREEN_STYLE > 0 - #if HAS_GRAPHICAL_LCD || LCD_WIDTH < 20 || LCD_HEIGHT < 4 + #if HAS_MARLINUI_U8GLIB || LCD_WIDTH < 20 || LCD_HEIGHT < 4 #error "Alternative LCD_INFO_SCREEN_STYLE requires 20x4 Character LCD." #elif LCD_INFO_SCREEN_STYLE > 1 #error "LCD_INFO_SCREEN_STYLE only has options 0 and 1 at this time." @@ -693,16 +693,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if ENABLED(LCD_PROGRESS_BAR) #if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY." - #elif !HAS_CHARACTER_LCD + #elif !HAS_MARLINUI_HD44780 #error "LCD_PROGRESS_BAR requires a character LCD." - #elif HAS_GRAPHICAL_LCD + #elif HAS_MARLINUI_U8GLIB #error "LCD_PROGRESS_BAR does not apply to graphical displays." #elif ENABLED(FILAMENT_LCD_DISPLAY) #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." #elif PROGRESS_MSG_EXPIRE < 0 #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0." #endif -#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_GRAPHICAL_LCD, HAS_GRAPHICAL_TFT, HAS_CHARACTER_LCD, EXTENSIBLE_UI) +#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI) #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI." #endif @@ -713,9 +713,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Custom Boot and Status screens */ -#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_GRAPHICAL_LCD, TOUCH_UI_FTDI_EVE) +#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE) #error "SHOW_CUSTOM_BOOTSCREEN requires Graphical LCD or TOUCH_UI_FTDI_EVE." -#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_GRAPHICAL_LCD +#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_MARLINUI_U8GLIB #error "CUSTOM_STATUS_SCREEN_IMAGE requires a Graphical LCD." #endif @@ -782,7 +782,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination" #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE #error "BABYSTEP_ZPROBE_OFFSET requires a probe." - #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_GRAPHICAL_LCD + #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_MARLINUI_U8GLIB #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD." #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET) #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET." @@ -1143,7 +1143,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Required LCD language */ -#if HAS_CHARACTER_LCD && !defined(DISPLAY_CHARSET_HD44780) +#if HAS_MARLINUI_HD44780 && !defined(DISPLAY_CHARSET_HD44780) #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." #endif @@ -1465,7 +1465,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #endif #endif -#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_GRAPHICAL_LCD) +#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_MARLINUI_U8GLIB) #error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD." #endif @@ -3081,7 +3081,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #undef _PIN_CONFLICT #endif -#if !HAS_GRAPHICAL_LCD +#if !HAS_MARLINUI_U8GLIB #if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS) #error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD." #endif diff --git a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp index 9fe69d4428..aa3c3c04a1 100644 --- a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp +++ b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp @@ -14,7 +14,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_CHARACTER_LCD +#if HAS_MARLINUI_HD44780 #include "../ultralcd.h" #include "../../MarlinCore.h" @@ -1119,4 +1119,4 @@ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) { #endif // DEBUG_LCDPRINT -#endif // HAS_CHARACTER_LCD +#endif // HAS_MARLINUI_HD44780 diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp index 3dc0925b43..e6cc227465 100644 --- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp +++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp @@ -22,7 +22,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_CHARACTER_LCD +#if HAS_MARLINUI_HD44780 /** * ultralcd_HD44780.cpp @@ -1517,4 +1517,4 @@ void MarlinUI::draw_status_screen() { #endif // HAS_LCD_MENU -#endif // HAS_CHARACTER_LCD +#endif // HAS_MARLINUI_HD44780 diff --git a/Marlin/src/lcd/dogm/lcdprint_u8g.cpp b/Marlin/src/lcd/dogm/lcdprint_u8g.cpp index c9a55a16e3..a6bdb373dd 100644 --- a/Marlin/src/lcd/dogm/lcdprint_u8g.cpp +++ b/Marlin/src/lcd/dogm/lcdprint_u8g.cpp @@ -9,7 +9,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "ultralcd_DOGM.h" @@ -53,4 +53,4 @@ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) { return ret; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index 4b51c2949b..82b6e768c6 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -27,7 +27,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI) +#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI) #include "dogm_Statusscreen.h" #include "ultralcd_DOGM.h" @@ -913,4 +913,4 @@ void MarlinUI::draw_status_message(const bool blink) { #endif } -#endif // HAS_GRAPHICAL_LCD && !LIGHTWEIGHT_UI +#endif // HAS_MARLINUI_U8GLIB && !LIGHTWEIGHT_UI diff --git a/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp b/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp index 70cb7c66d7..f97a323350 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp @@ -67,7 +67,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" @@ -300,4 +300,4 @@ uint8_t u8g_WriteEscSeqP_2_wire(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_s return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp index e70b3671b5..84c10dbb4d 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfig.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "HAL_LCD_com_defines.h" @@ -233,4 +233,4 @@ u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi = { u8g_dev_st7565_64128n_HAL_2x_f U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_HW_SPI_FN); u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN }; -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp index 838bee0ffc..740436d93c 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" @@ -205,4 +205,4 @@ u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_hw_spi = { u8g_dev_st7920_128x64_HAL_4x_f u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = { u8g_dev_st7920_128x64_HAL_4x_fn, &u8g_dev_st7920_128x64_HAL_4x_pb, U8G_COM_ST7920_HAL_SW_SPI }; #endif -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp index 39c294defe..eb9b5315e5 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp @@ -56,7 +56,7 @@ #include "../../inc/MarlinConfig.h" -#if HAS_GRAPHICAL_LCD && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT)) +#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT)) #include "HAL_LCD_com_defines.h" #include "ultralcd_DOGM.h" @@ -813,4 +813,4 @@ uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_p U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_TFT_FN); -#endif // HAS_GRAPHICAL_LCD && FSMC_CS +#endif // HAS_MARLINUI_U8GLIB && FSMC_CS diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp index e4e387c190..172afbd766 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" @@ -210,4 +210,4 @@ u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN }; u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN }; -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_fontutf8.cpp b/Marlin/src/lcd/dogm/u8g_fontutf8.cpp index 370b177470..89bdb09e1b 100644 --- a/Marlin/src/lcd/dogm/u8g_fontutf8.cpp +++ b/Marlin/src/lcd/dogm/u8g_fontutf8.cpp @@ -9,7 +9,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "../fontutils.h" @@ -312,4 +312,4 @@ int uxg_GetUtf8StrPixelWidthP(u8g_t *pu8g, PGM_P utf8_msg) { return data.adv; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp index b4f32d3343..c48abac810 100644 --- a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp @@ -37,7 +37,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "ultralcd_DOGM.h" #include "u8g_fontutf8.h" @@ -687,4 +687,4 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop #endif // HAS_LCD_MENU -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/fontutils.cpp b/Marlin/src/lcd/fontutils.cpp index 8b046af9a7..5bf07e1bd4 100644 --- a/Marlin/src/lcd/fontutils.cpp +++ b/Marlin/src/lcd/fontutils.cpp @@ -9,7 +9,7 @@ #include "../inc/MarlinConfig.h" -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #include "ultralcd.h" #include "../MarlinCore.h" #endif diff --git a/Marlin/src/lcd/lcdprint.cpp b/Marlin/src/lcd/lcdprint.cpp index 1355dbbf2d..e381c590f5 100644 --- a/Marlin/src/lcd/lcdprint.cpp +++ b/Marlin/src/lcd/lcdprint.cpp @@ -26,7 +26,7 @@ #include "../inc/MarlinConfigPre.h" -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #include "lcdprint.h" @@ -73,4 +73,4 @@ lcd_uint_t lcd_put_u8str_ind_P(PGM_P const pstr, const int8_t ind, PGM_P const i return n; } -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/lcd/lcdprint.h b/Marlin/src/lcd/lcdprint.h index 031d467bf9..14df5309d7 100644 --- a/Marlin/src/lcd/lcdprint.h +++ b/Marlin/src/lcd/lcdprint.h @@ -34,7 +34,7 @@ #include "../inc/MarlinConfig.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "dogm/u8g_fontutf8.h" typedef u8g_uint_t lcd_uint_t; diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index 474f40ceca..5d67410351 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -213,14 +213,14 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co clear_lcd(); // Re-initialize custom characters that may be re-used - #if HAS_CHARACTER_LCD + #if HAS_MARLINUI_HD44780 if (TERN1(AUTO_BED_LEVELING_UBL, !ubl.lcd_map_control)) set_custom_characters(on_status_screen() ? CHARSET_INFO : CHARSET_MENU); #endif refresh(LCDVIEW_CALL_REDRAW_NEXT); screen_changed = true; - TERN_(HAS_GRAPHICAL_LCD, drawing_screen = false); + TERN_(HAS_MARLINUI_U8GLIB, drawing_screen = false); TERN_(HAS_LCD_MENU, encoder_direction_normal()); diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h index d692144464..5248662823 100644 --- a/Marlin/src/lcd/menu/menu.h +++ b/Marlin/src/lcd/menu/menu.h @@ -39,7 +39,7 @@ typedef void (*selectFunc_t)(); #define SS_INVERT 0x02 #define SS_DEFAULT SS_CENTER -#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) +#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) void _lcd_zoffset_overlay_gfx(const float zvalue); #endif @@ -215,7 +215,7 @@ void _lcd_draw_homing(); void line_to_z(const float &z); #endif -#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) +#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) void _lcd_zoffset_overlay_gfx(const float zvalue); #endif diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 2953b3b464..22947ee514 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -60,7 +60,9 @@ void menu_advanced_settings(); static int8_t bar_percent = 0; if (ui.use_click()) { ui.goto_previous_screen(); - ui.set_custom_characters(CHARSET_MENU); + #if HAS_MARLINUI_HD44780 + ui.set_custom_characters(CHARSET_MENU); + #endif return; } bar_percent += (int8_t)ui.encoderPosition; @@ -73,7 +75,9 @@ void menu_advanced_settings(); void _progress_bar_test() { ui.goto_screen(progress_bar_test); - ui.set_custom_characters(CHARSET_INFO); + #if HAS_MARLINUI_HD44780 + ui.set_custom_characters(CHARSET_INFO); + #endif } #endif // LCD_PROGRESS_BAR_TEST diff --git a/Marlin/src/lcd/menu/menu_media.cpp b/Marlin/src/lcd/menu/menu_media.cpp index 3c0c6532f0..93ecc49d98 100644 --- a/Marlin/src/lcd/menu/menu_media.cpp +++ b/Marlin/src/lcd/menu/menu_media.cpp @@ -99,7 +99,7 @@ class MenuItem_sdfolder : public MenuItem_sdbase { encoderTopLine = 0; ui.encoderPosition = 2 * (ENCODER_STEPS_PER_MENU_ITEM); ui.screen_changed = true; - TERN_(HAS_GRAPHICAL_LCD, ui.drawing_screen = false); + TERN_(HAS_MARLINUI_U8GLIB, ui.drawing_screen = false); ui.refresh(); } }; @@ -107,7 +107,7 @@ class MenuItem_sdfolder : public MenuItem_sdbase { void menu_media() { ui.encoder_direction_menus(); - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB static uint16_t fileCnt; if (ui.first_page) fileCnt = card.get_num_Files(); #else diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp index 9fea0597db..4e356b3e0c 100644 --- a/Marlin/src/lcd/menu/menu_motion.cpp +++ b/Marlin/src/lcd/menu/menu_motion.cpp @@ -205,7 +205,7 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int #if DISABLED(HAS_GRAPHICAL_TFT) extern const char NUL_STR[]; SUBMENU_P(NUL_STR, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); }); - MENU_ITEM_ADDON_START(0 + ENABLED(HAS_CHARACTER_LCD)); + MENU_ITEM_ADDON_START(0 + ENABLED(HAS_MARLINUI_HD44780)); lcd_put_u8str(tmp); MENU_ITEM_ADDON_END(); #else diff --git a/Marlin/src/lcd/menu/menu_tune.cpp b/Marlin/src/lcd/menu/menu_tune.cpp index 758d75c8e9..b84cb8cbd7 100644 --- a/Marlin/src/lcd/menu/menu_tune.cpp +++ b/Marlin/src/lcd/menu/menu_tune.cpp @@ -46,7 +46,7 @@ #include "../../feature/babystep.h" #include "../lcdprint.h" - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #include "../dogm/ultralcd_DOGM.h" #endif @@ -68,10 +68,10 @@ const float spm = planner.steps_to_mm[axis]; MenuEditItemBase::draw_edit_screen(msg, BABYSTEP_TO_STR(spm * babystep.accum)); #if ENABLED(BABYSTEP_DISPLAY_TOTAL) - const bool in_view = TERN1(HAS_GRAPHICAL_LCD, PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1)); + const bool in_view = TERN1(HAS_MARLINUI_U8GLIB, PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1)); if (in_view) { - TERN_(HAS_GRAPHICAL_LCD, ui.set_font(FONT_MENU)); - lcd_moveto(0, TERN(HAS_GRAPHICAL_LCD, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT, LCD_HEIGHT - 1)); + TERN_(HAS_MARLINUI_U8GLIB, ui.set_font(FONT_MENU)); + lcd_moveto(0, TERN(HAS_MARLINUI_U8GLIB, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT, LCD_HEIGHT - 1)); lcd_put_u8str_P(GET_TEXT(MSG_BABYSTEP_TOTAL)); lcd_put_wchar(':'); lcd_put_u8str(BABYSTEP_TO_STR(spm * babystep.axis_total[BS_TOTAL_IND(axis)])); diff --git a/Marlin/src/lcd/touch/touch_buttons.cpp b/Marlin/src/lcd/touch/touch_buttons.cpp index 8eae73df11..c97018c379 100644 --- a/Marlin/src/lcd/touch/touch_buttons.cpp +++ b/Marlin/src/lcd/touch/touch_buttons.cpp @@ -74,7 +74,7 @@ TouchButtons touch; void TouchButtons::init() { touchIO.Init(); } uint8_t TouchButtons::read_buttons() { - #ifdef HAS_SPI_LCD + #ifdef HAS_WIRED_LCD int16_t x, y; if (!touchIO.getRawPoint(&x, &y)) return 0; diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index fc55c3c2f6..89dc0adaf3 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -51,7 +51,7 @@ MarlinUI ui; constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(STATUS_MESSAGE_SCROLLING) uint8_t MarlinUI::status_scroll_offset; // = 0 constexpr uint8_t MAX_MESSAGE_LENGTH = _MAX(LONG_FILENAME_LENGTH, MAX_LANG_CHARSIZE * 2 * (LCD_WIDTH)); @@ -62,7 +62,7 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; constexpr uint8_t MAX_MESSAGE_LENGTH = 63; #endif -#if EITHER(HAS_SPI_LCD, EXTENSIBLE_UI) +#if EITHER(HAS_WIRED_LCD, EXTENSIBLE_UI) uint8_t MarlinUI::alert_level; // = 0 char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1]; #endif @@ -114,9 +114,9 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; } #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "dogm/ultralcd_DOGM.h" #endif @@ -167,7 +167,7 @@ uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed millis_t MarlinUI::next_button_update_ms; // = 0 -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB bool MarlinUI::drawing_screen, MarlinUI::first_page; // = false #endif @@ -372,7 +372,7 @@ void MarlinUI::init() { #endif // HAS_SHIFT_ENCODER - #if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS + #if BOTH(HAS_ENCODER_ACTION, HAS_SLOW_BUTTONS) slow_buttons = 0; #endif @@ -873,7 +873,7 @@ void MarlinUI::update() { #endif // HAS_LCD_MENU - if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_GRAPHICAL_LCD, drawing_screen)) { + if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_MARLINUI_U8GLIB, drawing_screen)) { next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL; @@ -971,7 +971,7 @@ void MarlinUI::update() { // This runs every ~100ms when idling often enough. // Instead of tracking changes just redraw the Status Screen once per second. if (on_status_screen() && !lcd_status_update_delay--) { - lcd_status_update_delay = TERN(HAS_GRAPHICAL_LCD, 12, 9); + lcd_status_update_delay = TERN(HAS_MARLINUI_U8GLIB, 12, 9); if (max_display_update_time) max_display_update_time--; // Be sure never go to a very big number refresh(LCDVIEW_REDRAW_NOW); } @@ -1010,7 +1010,7 @@ void MarlinUI::update() { TERN_(HAS_ADC_BUTTONS, keypad_buttons = 0); - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #if ENABLED(LIGHTWEIGHT_UI) const bool in_status = on_status_screen(), @@ -1294,7 +1294,7 @@ void MarlinUI::update() { #endif // HAS_ENCODER_ACTION -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if HAS_DISPLAY @@ -1342,7 +1342,7 @@ void MarlinUI::update() { next_filament_display = ms + 5000UL; // Show status message for 5s #endif - #if BOTH(HAS_SPI_LCD, STATUS_MESSAGE_SCROLLING) + #if BOTH(HAS_WIRED_LCD, STATUS_MESSAGE_SCROLLING) status_scroll_offset = 0; #endif @@ -1501,7 +1501,7 @@ void MarlinUI::update() { set_status_P(print_paused); #if ENABLED(PARK_HEAD_ON_PAUSE) - TERN_(HAS_SPI_LCD, lcd_pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT)); // Show message immediately to let user know about pause in progress + TERN_(HAS_WIRED_LCD, lcd_pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT)); // Show message immediately to let user know about pause in progress queue.inject_P(PSTR("M25 P\nM24")); #elif ENABLED(SDSUPPORT) queue.inject_P(PSTR("M25")); @@ -1610,11 +1610,11 @@ void MarlinUI::update() { refresh(); - #if HAS_SPI_LCD || defined(LED_BACKLIGHT_TIMEOUT) + #if HAS_WIRED_LCD || defined(LED_BACKLIGHT_TIMEOUT) const millis_t ms = millis(); #endif - TERN_(HAS_SPI_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity + TERN_(HAS_WIRED_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity #ifdef LED_BACKLIGHT_TIMEOUT leds.reset_timeout(ms); diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h index 59e7cbe7d1..c23dc5d84e 100644 --- a/Marlin/src/lcd/ultralcd.h +++ b/Marlin/src/lcd/ultralcd.h @@ -40,7 +40,7 @@ #if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT) #define HAS_DIGITAL_BUTTONS 1 #endif -#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL))) +#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_WIRED_LCD && DISABLED(NEWPANEL))) #define HAS_SHIFT_ENCODER 1 #endif @@ -53,7 +53,7 @@ #define MULTI_MANUAL 1 #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #include "../MarlinCore.h" @@ -104,7 +104,7 @@ #endif // HAS_LCD_MENU -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // REPRAPWORLD_KEYPAD (and ADC_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD) @@ -231,7 +231,7 @@ #endif #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB enum MarlinFont : uint8_t { FONT_STATUSMENU = 1, FONT_EDIT, @@ -316,11 +316,11 @@ public: static void refresh(); #else FORCE_INLINE static void refresh() { - TERN_(HAS_SPI_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW)); + TERN_(HAS_WIRED_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW)); } #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD static bool detected(); static void init_lcd(); #else @@ -381,7 +381,7 @@ public: static void pause_print(); static void resume_print(); - #if HAS_SPI_LCD + #if HAS_WIRED_LCD static millis_t next_button_update_ms; @@ -403,7 +403,7 @@ public: static void show_bootscreen(); #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB static void set_font(const MarlinFont font_nr); @@ -458,7 +458,7 @@ public: #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB static bool drawing_screen, first_page; #else static constexpr bool drawing_screen = false, first_page = true; @@ -577,7 +577,7 @@ public: static void draw_select_screen_prompt(PGM_P const pref, const char * const string=nullptr, PGM_P const suff=nullptr); - #elif HAS_SPI_LCD + #elif HAS_WIRED_LCD static constexpr bool lcd_clicked = false; static constexpr bool on_status_screen() { return true; } @@ -692,7 +692,7 @@ private: static void finish_status(const bool persist); #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD #if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS > 0 static bool defer_return_to_status; #else diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index a3a89736e5..712182a0ea 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -351,7 +351,7 @@ void Endstops::event_handler() { if (hit_state == prev_hit_state) return; prev_hit_state = hit_state; if (hit_state) { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' '; #define _SET_STOP_CHAR(A,C) (chr## A = C) #else @@ -382,7 +382,7 @@ void Endstops::event_handler() { #endif SERIAL_EOL(); - TERN_(HAS_SPI_LCD, ui.status_printf_P(0, PSTR(S_FMT " %c %c %c %c"), GET_TEXT(MSG_LCD_ENDSTOPS), chrX, chrY, chrZ, chrP)); + TERN_(HAS_WIRED_LCD, ui.status_printf_P(0, PSTR(S_FMT " %c %c %c %c"), GET_TEXT(MSG_LCD_ENDSTOPS), chrX, chrY, chrZ, chrP)); #if BOTH(SD_ABORT_ON_ENDSTOP_HIT, SDSUPPORT) if (planner.abort_on_endstop_hit) { diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 30e1ffb0ca..2ef00f7959 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -234,7 +234,7 @@ float Planner::previous_nominal_speed_sqr; xyze_pos_t Planner::position_cart; #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD volatile uint32_t Planner::block_buffer_runtime_us = 0; #endif @@ -747,7 +747,7 @@ block_t* Planner::get_current_block() { if (TEST(block->flag, BLOCK_BIT_RECALCULATE)) return nullptr; // We can't be sure how long an active block will take, so don't count it. - TERN_(HAS_SPI_LCD, block_buffer_runtime_us -= block->segment_time_us); + TERN_(HAS_WIRED_LCD, block_buffer_runtime_us -= block->segment_time_us); // As this block is busy, advance the nonbusy block pointer block_buffer_nonbusy = next_block_index(block_buffer_tail); @@ -761,7 +761,7 @@ block_t* Planner::get_current_block() { } // The queue became empty - TERN_(HAS_SPI_LCD, clear_block_buffer_runtime()); // paranoia. Buffer is empty now - so reset accumulated time to zero. + TERN_(HAS_WIRED_LCD, clear_block_buffer_runtime()); // paranoia. Buffer is empty now - so reset accumulated time to zero. return nullptr; } @@ -1578,7 +1578,7 @@ void Planner::quick_stop() { // forced to empty, there's no risk the ISR will touch this. delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE; - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Clear the accumulated runtime clear_block_buffer_runtime(); #endif @@ -2081,7 +2081,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, const uint8_t moves_queued = nonbusy_movesplanned(); // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill - #if EITHER(SLOWDOWN, HAS_SPI_LCD) || defined(XY_FREQUENCY_LIMIT) + #if EITHER(SLOWDOWN, HAS_WIRED_LCD) || defined(XY_FREQUENCY_LIMIT) // Segment time im micro seconds int32_t segment_time_us = LROUND(1000000.0f / inverse_secs); #endif @@ -2096,14 +2096,14 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Buffer is draining so add extra time. The amount of time added increases if the buffer is still emptied more. const int32_t nst = segment_time_us + LROUND(2 * time_diff / moves_queued); inverse_secs = 1000000.0f / nst; - #if defined(XY_FREQUENCY_LIMIT) || HAS_SPI_LCD + #if defined(XY_FREQUENCY_LIMIT) || HAS_WIRED_LCD segment_time_us = nst; #endif } } #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Protect the access to the position. const bool was_enabled = stepper.suspend(); @@ -3029,7 +3029,7 @@ void Planner::set_max_jerk(const AxisEnum axis, float targetValue) { #endif } -#if HAS_SPI_LCD +#if HAS_WIRED_LCD uint16_t Planner::block_buffer_runtime() { #ifdef __AVR__ diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index 660d9ad5aa..c4e11490b1 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -218,7 +218,7 @@ typedef struct block_t { uint8_t valve_pressure, e_to_p_pressure; #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD uint32_t segment_time_us; #endif @@ -438,7 +438,7 @@ class Planner { static uint8_t g_uc_extruder_last_move[EXTRUDERS]; #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD volatile static uint32_t block_buffer_runtime_us; // Theoretical block buffer runtime in µs #endif @@ -871,7 +871,7 @@ class Planner { block_buffer_tail = next_block_index(block_buffer_tail); } - #if HAS_SPI_LCD + #if HAS_WIRED_LCD static uint16_t block_buffer_runtime(); static void clear_block_buffer_runtime(); #endif diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index 459d00e3e7..95f761f26a 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -124,7 +124,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #define LCD_PINS_RS 13 #define LCD_PINS_ENABLE 17 @@ -152,7 +152,7 @@ #define BTN_EN2 12 #define BTN_ENC 14 -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB // Hardware serial pins // Add the following to Configuration.h or Configuration_adv.h to assign diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 2b7909221e..002d2ebd9c 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -389,7 +389,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins @@ -632,4 +632,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index 13e30b961c..c59c90ad1d 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -126,7 +126,7 @@ * for the onboard SD card, and a chip select signal is not provided for the remote * SD card. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1-1 @@ -139,7 +139,7 @@ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD + #if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER) #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0" #endif @@ -147,7 +147,7 @@ #error "SDSUPPORT is not supported by the BIQU B300 v1.0 when an LCD controller is used" #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD /** * SD Card Reader diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index ed5fd530e0..335e3a588d 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -97,7 +97,7 @@ * for the onboard SD card, and a chip select signal is not provided for the remote * SD card. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1-1 @@ -110,7 +110,7 @@ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD + #if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER) #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" #endif @@ -118,7 +118,7 @@ #error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used" #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD /** * SD Card Reader diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h index d5e2560662..4165bb3503 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h @@ -65,7 +65,7 @@ * by redrawing the screen after SD card accesses. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BTN_EN1 P3_26 #define BTN_EN2 P3_25 #define BTN_ENC P2_11 diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index a38be0bef7..e8983c7f54 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -214,7 +214,7 @@ #define EXPA2_09_PIN P0_15 #define EXPA2_10_PIN P0_17 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(ANET_FULL_GRAPHICS_LCD) @@ -350,7 +350,7 @@ #endif // !CR10_STOCKDISPLAY -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index fb383ff5ff..3bdd3061b7 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -232,7 +232,7 @@ * ----- ----- * EXP2 EXP1 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(ANET_FULL_GRAPHICS_LCD) #define LCD_PINS_RS P1_23 @@ -371,9 +371,9 @@ #endif // !FYSETC_MINI_12864 - #endif // HAS_GRAPHICAL_LCD + #endif // HAS_MARLINUI_U8GLIB -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if HAS_ADC_BUTTONS #error "ADC BUTTONS do not work unmodifed on SKR 1.4, The ADC ports cannot take more than 3.3v." diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 9fade582e9..fd902afda4 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -92,7 +92,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_30 // (37) not 5V tolerant #endif diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index 7d0745aa2d..1cb6774a41 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -217,7 +217,7 @@ * that the garbage/lines are erased immediately after the SD card accesses are completed. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1.1 #define BTN_ENC P1_30 // EXP1.2 #define BTN_EN1 P3_26 // EXP2.5 diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index c57c987a75..02fdaafd30 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -235,7 +235,8 @@ * ----- ----- * EXP1 EXP2 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD + #define BEEPER_PIN P1_31 #define BTN_ENC P1_30 @@ -321,7 +322,7 @@ #endif // !CR10_STOCKDISPLAY -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 7b87c95f84..097f8be22a 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -326,7 +326,7 @@ #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 @@ -370,8 +370,9 @@ #define DOGLCD_SCK SCK_PIN #define DOGLCD_MOSI MOSI_PIN - #define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #else #if ENABLED(FYSETC_MINI_12864) @@ -420,9 +421,9 @@ //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #endif + #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Ethernet pins diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index d798e38735..6331d6aa7c 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -109,7 +109,7 @@ // // Display // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -185,7 +185,7 @@ #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index de987f95d2..0916d0d65b 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -193,7 +193,7 @@ #define EXPA1_09_PIN P0_16 #define EXPA1_10_PIN P2_08 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -238,7 +238,7 @@ #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h index 0314c5049f..d66ffbe4e5 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -141,7 +141,7 @@ // connector are shared with the onboard SD card, and Marlin does not support reading // G-code files from the onboard SD card. // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P0_27 // EXP2-7 - open drain @@ -160,7 +160,7 @@ #error "SDSUPPORT is not currently supported by the Cohesion3D boards" #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Ethernet pins diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h index 9dc870a353..66604ef635 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h @@ -206,7 +206,7 @@ #define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) #endif -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1-1 //#define SD_DETECT_PIN P0_27 // EXP2-7 @@ -222,7 +222,7 @@ #define KILL_PIN P2_11 // EXP2-10 -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h index 3df10a41d7..a073a6fe30 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -241,11 +241,12 @@ * ----- ----- * EXP1 EXP2 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_31 #define BTN_ENC P1_30 #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS P1_00 #define BTN_EN1 P0_18 @@ -327,7 +328,7 @@ #endif // !CR10_STOCKDISPLAY -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index 696270b417..33975df8ee 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -109,7 +109,7 @@ #define STAT_LED_RED_PIN P1_19 #define STAT_LED_BLUE_PIN P1_20 -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD /* The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index 75c899fe01..50e7eb1914 100644 --- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -178,6 +178,6 @@ #define LCD_PINS_ENABLE P0_18 #define LCD_PINS_D4 P0_15 #define KILL_PIN P2_11 -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD #error "Only the CR10_STOCKDISPLAY is supported with TH3D EZBoard." #endif diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index 2fb112f5af..2fe9a43ba1 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -105,7 +105,7 @@ #define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing #define KILL_PIN -1 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 18 @@ -148,4 +148,4 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index d21cd22e53..e30a65b90e 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -123,7 +123,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 18 @@ -170,4 +170,4 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h index 3dc9c9a6be..3c4f3c719a 100644 --- a/Marlin/src/pins/mega/pins_INTAMSYS40.h +++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h @@ -122,7 +122,7 @@ #define BEEPER_PIN 18 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 20 #define LCD_PINS_ENABLE 30 #define LCD_PINS_D4 14 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index 9005ac2acf..ff7cf15714 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -130,7 +130,7 @@ // #define BEEPER_PIN 64 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 14 #define LCD_PINS_ENABLE 15 @@ -152,4 +152,4 @@ #define SHIFT_EN 17 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index 74a45eac01..963911ec5d 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -212,7 +212,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) @@ -260,7 +260,7 @@ #define BTN_CENTER 15 // J0 #define BTN_ENC BTN_CENTER -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 9589fa5851..045c1bc0fa 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -119,7 +119,7 @@ // // LCD / Controller // -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB // OVERLORD OLED pins #define LCD_PINS_RS 20 #define LCD_PINS_D5 21 diff --git a/Marlin/src/pins/mega/pins_PICA.h b/Marlin/src/pins/mega/pins_PICA.h index acaeefe178..ff4d3e834d 100644 --- a/Marlin/src/pins/mega/pins_PICA.h +++ b/Marlin/src/pins/mega/pins_PICA.h @@ -137,7 +137,7 @@ // #define BEEPER_PIN 29 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 33 #define LCD_PINS_ENABLE 30 #define LCD_PINS_D4 35 diff --git a/Marlin/src/pins/mega/pins_SILVER_GATE.h b/Marlin/src/pins/mega/pins_SILVER_GATE.h index e339b0472a..41cbe5e0e0 100644 --- a/Marlin/src/pins/mega/pins_SILVER_GATE.h +++ b/Marlin/src/pins/mega/pins_SILVER_GATE.h @@ -72,7 +72,7 @@ #define HEATER_BED_PIN 8 #define TEMP_BED_PIN 6 -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 #define LCD_PINS_RS 30 #define LCD_PINS_ENABLE 20 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 0ccdadadde..3ec4e1a34b 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -1227,7 +1227,7 @@ #define LCD_PINS_D4 -1 #endif -#if HAS_CHARACTER_LCD || TOUCH_UI_ULTIPANEL +#if HAS_MARLINUI_HD44780 || TOUCH_UI_ULTIPANEL #ifndef LCD_PINS_D5 #define LCD_PINS_D5 -1 #endif @@ -1597,7 +1597,7 @@ #define Z4_MS3_PIN -1 #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #if !defined(ST7920_DELAY_1) && defined(BOARD_ST7920_DELAY_1) #define ST7920_DELAY_1 BOARD_ST7920_DELAY_1 #endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index 21e43bb361..2ea15c97d3 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -160,7 +160,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 32 @@ -188,4 +188,4 @@ #define SD_DETECT_PIN 15 #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index 39ba3ddf04..4a1bf70b6e 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -166,7 +166,7 @@ // // LCD / Controller // -#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) +#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) #define KILL_PIN 32 @@ -196,4 +196,4 @@ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE -#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE +#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index c41a6ac179..6314bc07b8 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -141,7 +141,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #if !MB(MINIRAMBO_10A) #define KILL_PIN 32 @@ -189,4 +189,4 @@ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL -#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 2109eb615b..735852b2ff 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -183,7 +183,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 80 @@ -249,4 +249,4 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h index 1989a1657f..f0057e1fc9 100644 --- a/Marlin/src/pins/ramps/pins_3DRAG.h +++ b/Marlin/src/pins/ramps/pins_3DRAG.h @@ -106,7 +106,7 @@ #define BEEPER_PIN 33 -#endif // HAS_SPI_LCD && NEWPANEL +#endif // ULTRA_LCD && NEWPANEL /** * M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h index 3fa738e322..87d24890c9 100644 --- a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -87,7 +87,7 @@ // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(ZONESTAR_LCD) #define LCD_PINS_RS 2 #define LCD_PINS_ENABLE 36 diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index 362ff7ae43..75a219c177 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -197,7 +197,7 @@ #define LCD_PINS_D7 29 #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(200) #endif diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h index 3f7575497c..3fa3cc9e8c 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -261,7 +261,7 @@ #define NEOPIXEL_PIN 25 #endif - #elif HAS_GRAPHICAL_LCD + #elif HAS_MARLINUI_U8GLIB #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index f526b9b226..7e8c245a41 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -95,7 +95,7 @@ // #define BEEPER_PIN 6 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_SDSS 53 @@ -119,4 +119,4 @@ #define BTN_ENC 23 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index b2d394e61d..aa73aabbc1 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -430,7 +430,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins @@ -706,7 +706,7 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD) #define SHIFT_OUT 40 diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index 412aa22902..1c2cb60957 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -128,7 +128,7 @@ // AnyCubic made the following changes to 1.1.0-RC8 // If these are appropriate for your LCD let us know. // -#if 0 && HAS_SPI_LCD +#if 0 && HAS_WIRED_LCD // LCD Display output pins #if BOTH(NEWPANEL, PANEL_ONE) @@ -154,4 +154,4 @@ #define DOGLCD_A0 42 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index 33b2a60d64..1568288e69 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -271,7 +271,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index 2dfde42bac..597a37bdbc 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -119,7 +119,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 18 @@ -158,7 +158,7 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h index 8c54cad3b6..6e3768c663 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM1.h +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -181,7 +181,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 23 // D24 PA15_CTS1 #define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 @@ -198,4 +198,4 @@ #define BTN_EN2 13 // D13 PB27_TIOB0 #define BTN_ENC 16 // D16 PA13_TXD1 #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h index 3223ac7a0e..5a3fe0e4d5 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM2.h +++ b/Marlin/src/pins/sam/pins_ARCHIM2.h @@ -237,7 +237,7 @@ // // LCD / Controller // -#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) +#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) #define BEEPER_PIN 23 // D24 PA15_CTS1 #define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index b7c01f843a..cd4033aa6f 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -113,7 +113,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 42 #define LCD_PINS_ENABLE 43 @@ -168,4 +168,4 @@ #define BEEPER_PIN -1 #endif // SPARK_FULL_GRAPHICS -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 7f559f1190..5f9ad48a08 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -105,7 +105,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 42 #define LCD_PINS_ENABLE 43 @@ -171,4 +171,4 @@ #define DOGLCD_CS 45 #endif // SPARK_FULL_GRAPHICS -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index c82c7e9c53..60fe351237 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -226,7 +226,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(RADDS_DISPLAY) @@ -287,7 +287,7 @@ #endif // SPARK_FULL_GRAPHICS -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef SDSS #define SDSS 4 diff --git a/Marlin/src/pins/sam/pins_RAMPS_DUO.h b/Marlin/src/pins/sam/pins_RAMPS_DUO.h index 94f1b50776..bfc3968ffa 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h +++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h @@ -76,7 +76,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if BOTH(NEWPANEL, PANEL_ONE) #undef LCD_PINS_D4 @@ -129,4 +129,4 @@ #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index 5662590e26..ee525eefaa 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -139,7 +139,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // ramps-fd lcd adaptor #define BEEPER_PIN 37 @@ -203,7 +203,7 @@ #define DOGLCD_MISO 74 // MISO_PIN #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if HAS_TMC_UART /** diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index 524c14d198..b9e61fb27c 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -200,7 +200,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BEEPER_PIN 62 @@ -271,4 +271,4 @@ #define BTN_ENC 40 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index 187473b3dd..dc0c127995 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -186,7 +186,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BEEPER_PIN 62 @@ -253,4 +253,4 @@ #define BTN_ENC 40 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index 388ac1a331..6076be07e9 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -287,7 +287,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins @@ -594,7 +594,7 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h index 3978198eef..f33cdc83ac 100644 --- a/Marlin/src/pins/sanguino/pins_ANET_10.h +++ b/Marlin/src/pins/sanguino/pins_ANET_10.h @@ -152,7 +152,7 @@ * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_SDSS 28 #if ENABLED(ADC_KEYPAD) #define SERVO0_PIN 27 // free for BLTouch/3D-Touch diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h index 4817ce8043..9f406c1f78 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h @@ -36,7 +36,7 @@ #define BOARD_INFO_NAME "Melzi (Creality)" // Alter timing for graphical display -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h index 8128fb86e6..5014620c6b 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h @@ -28,7 +28,7 @@ #define BOARD_INFO_NAME "Melzi (Malyan)" // Alter timing for graphical display -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h index 9e433f19c4..f878941037 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h @@ -27,7 +27,7 @@ #define BOARD_INFO_NAME "Melzi (Tronxy)" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #endif diff --git a/Marlin/src/pins/sanguino/pins_MELZI_V2.h b/Marlin/src/pins/sanguino/pins_MELZI_V2.h index 1cdf51117f..275498d558 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_V2.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_V2.h @@ -24,7 +24,7 @@ #define BOARD_INFO_NAME "Melzi V2" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #endif diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index 4b4fb1d70e..121e1db6f2 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -154,11 +154,11 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define SD_DETECT_PIN -1 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #if ENABLED(LCD_FOR_MELZI) @@ -290,7 +290,7 @@ #define BTN_EN2 10 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h index a3cb987fff..fd741d296d 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -171,7 +171,7 @@ * EXP1 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -225,7 +225,7 @@ #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and MKS_LCD12864 are currently supported on the BIGTREE_SKR_E3_DIP." #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h index 4f03d3bbd7..30d057d900 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h @@ -129,7 +129,7 @@ #define EXP1_3 PB7 #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -173,7 +173,7 @@ #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3." #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) @@ -185,7 +185,7 @@ * _____ _____ * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) - * (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI) + * (FREE) PB9 | 5 6 | PA10 (SD_CS) (PB8) LCD_CS | 5 6 | MOSI (SPI1-MOSI) * RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | RESET * (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V * ----- ----- diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index aaecc05442..3397c34f33 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -110,7 +110,7 @@ * EXP2 EXP1 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC10 #define BTN_ENC PC11 @@ -172,7 +172,7 @@ #endif // !FYSETC_MINI_12864 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif @@ -186,7 +186,7 @@ #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h index e67a6d3b1b..66930a2ea5 100644 --- a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h +++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h @@ -142,7 +142,7 @@ #endif // Alter timing for graphical display -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index 2521359e53..3a872db025 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -120,7 +120,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select @@ -281,4 +281,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index a04d6d261f..ebe5964d05 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -139,11 +139,11 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC9 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define DOGLCD_A0 PA15 #ifdef pins_v2_20190128 diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index 24aa83d948..de5ea45d44 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -130,10 +130,10 @@ * Note: Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC9 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define DOGLCD_A0 PB14 #define DOGLCD_CS PB12 #define DOGLCD_SCK PB13 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index b6520d563c..ca25c45a7b 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // @@ -158,7 +158,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -170,7 +170,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index 7dbee215a0..02fd3bcae7 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // @@ -166,7 +166,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -178,7 +178,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Beeper diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index b6520d563c..ca25c45a7b 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // @@ -158,7 +158,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -170,7 +170,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index 7731ffb5e7..fc18263fdd 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) @@ -168,7 +168,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -180,7 +180,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Beeper diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 19f3c3efda..a530c89d2c 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -320,7 +320,7 @@ #endif -#if HAS_SPI_LCD && !HAS_SPI_TFT +#if HAS_WIRED_LCD && !HAS_SPI_TFT // NON TFT Displays @@ -361,7 +361,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD && !HAS_SPI_TFT +#endif // HAS_WIRED_LCD && !HAS_SPI_TFT #define HAS_SPI_FLASH 1 #define SPI_FLASH_SIZE 0x1000000 // 16MB diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index bbacbf5585..015e29bdbe 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -132,7 +132,7 @@ * ----- ----- ----- * EXP1 EXP2 EXP3 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC1 #define BTN_ENC PC3 @@ -162,7 +162,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index 2bd417951f..aa1ccedb35 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -81,7 +81,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PD2 #define BTN_ENC PB3 #define LCD_PINS_RS PC3 @@ -111,7 +111,7 @@ #endif // !MKS_MINI_12864 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif @@ -123,7 +123,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // Motor current PWM pins #define MOTOR_CURRENT_PWM_XY_PIN PB0 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h index bcb731df71..5cdeda3a83 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -96,7 +96,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC1 #define BTN_ENC PC3 @@ -126,7 +126,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index be3b130c85..caa5e2b8fc 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -233,9 +233,6 @@ // // LCD / Controller // -#ifndef BEEPER_PIN - #define BEEPER_PIN PC5 -#endif /** * Note: MKS Robin TFT screens use various TFT controllers. @@ -343,7 +340,7 @@ #endif -#if HAS_SPI_LCD && !HAS_SPI_TFT +#if HAS_WIRED_LCD && !HAS_SPI_TFT // NON TFT Displays @@ -380,7 +377,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD && !HAS_SPI_TFT +#endif // HAS_WIRED_LCD && !HAS_SPI_TFT #define HAS_SPI_FLASH 1 #define SPI_FLASH_SIZE 0x1000000 // 16MB @@ -391,6 +388,10 @@ #define W25QXX_SCK_PIN PB13 #endif +#ifndef BEEPER_PIN + #define BEEPER_PIN PC5 +#endif + #if ENABLED(SPEAKER) && BEEPER_PIN == PC5 #error "MKS Robin nano default BEEPER_PIN is not a SPEAKER." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index e445b8169b..93f0de33da 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -225,7 +225,7 @@ #define BTN_EN2 PG4 #endif -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD #define BEEPER_PIN PC5 #define BTN_ENC PG2 diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h index 79f53f02c2..cf2ba2c5fa 100644 --- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -97,7 +97,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select @@ -258,4 +258,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index 468ee5394a..e74698f89e 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -112,7 +112,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select @@ -282,4 +282,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BEAST.h b/Marlin/src/pins/stm32f4/pins_BEAST.h index d23442cced..268b7b59cd 100644 --- a/Marlin/src/pins/stm32f4/pins_BEAST.h +++ b/Marlin/src/pins/stm32f4/pins_BEAST.h @@ -120,7 +120,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select @@ -282,4 +282,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index 7843572e13..c37f6cce04 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -187,21 +187,22 @@ #define SDSS PA4 /** - * -------------------------------------BTT002 V1.0----------------------------------------------- - * _____ _____ | + * -------------------------------------BTT002 V1.0-------------------------------------------- + * ----- ----- | * PA3 | · · | GND 5V | · · | GND | * NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) | * (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) | * (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) | * (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) | - * ￣￣ ￣￣ | + * ----- ----- | * EXP2 EXP1 | - * --------------------------------------------------------------------------------------------- + * -------------------------------------------------------------------------------------------- */ + // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PE7 #define BTN_ENC PB1 @@ -236,7 +237,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -248,7 +249,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // RGB LEDs diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index ddca719e53..dc8ce9f2d1 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -290,9 +290,12 @@ // overriding pins to access. // #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN PB10 #define SDSS PB12 + #elif SD_CONNECTION_IS(ONBOARD) + // Instruct the STM32 HAL to override the default SPI pins from the variant.h file #define CUSTOM_SPI_PINS #define SDSS PA4 @@ -301,25 +304,26 @@ #define MISO_PIN PA6 #define MOSI_PIN PA7 #define SD_DETECT_PIN PC4 + #elif SD_CONNECTION_IS(CUSTOM_CABLE) - #define "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" + #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" #endif /** - * _____ _____ + * ----- ----- * NC | · · | GND 5V | · · | GND * RESET | · · | PB10(SD_DETECT) (LCD_D7) PG5 | · · | PG6 (LCD_D6) * (MOSI)PB15 | · · | PH10(BTN_EN2) (LCD_D5) PG7 | · · | PG8 (LCD_D4) * (SD_SS)PB12 | · · | PD10(BTN_EN1) (LCD_RS) PA8 | · · | PC10 (LCD_EN) * (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA15 | · · | PC11 (BEEPER) - * ￣￣ ￣￣ + * ----- ----- * EXP2 EXP1 */ // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC11 #define BTN_ENC PA15 @@ -390,7 +394,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -402,6 +406,6 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #undef TP diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index e9abd66795..8397276144 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -251,9 +251,12 @@ // Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2 // #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN PF12 #define SDSS PB12 + #elif SD_CONNECTION_IS(ONBOARD) + // The SKR Pro's ONBOARD SD interface is on SPI1. // Due to a pull resistor on the clock line, it needs to use SPI Data Mode 3 to // function with Hardware SPI. This is not currently configurable in the HAL, @@ -264,29 +267,31 @@ #define MISO_PIN PA6 #define MOSI_PIN PB5 #define SD_DETECT_PIN PB11 + #elif SD_CONNECTION_IS(CUSTOM_CABLE) - #define "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" + #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" #endif /** - * _____ _____ + * ----- ----- * NC | · · | GND 5V | · · | GND * RESET | · · | PF12(SD_DETECT) (LCD_D7) PG7 | · · | PG6 (LCD_D6) * (MOSI)PB15 | · · | PF11(BTN_EN2) (LCD_D5) PG3 | · · | PG2 (LCD_D4) * (SD_SS)PB12 | · · | PG10(BTN_EN1) (LCD_RS) PD10 | · · | PD11 (LCD_EN) * (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA8 | · · | PG4 (BEEPER) - * ￣￣ ￣￣ + * ----- ----- * EXP2 EXP1 */ // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PG4 #define BTN_ENC PA8 #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS PG6 #define BTN_EN1 PD11 @@ -301,10 +306,12 @@ #undef BOARD_ST7920_DELAY_3 #elif ENABLED(MKS_MINI_12864) + #define DOGLCD_A0 PG6 #define DOGLCD_CS PG3 #define BTN_EN1 PG10 #define BTN_EN2 PF11 + #else #define LCD_PINS_RS PD10 @@ -343,32 +350,32 @@ #endif - // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD - #ifndef BOARD_ST7920_DELAY_1 - #define BOARD_ST7920_DELAY_1 DELAY_NS(96) - #endif - #ifndef BOARD_ST7920_DELAY_2 - #define BOARD_ST7920_DELAY_2 DELAY_NS(48) - #endif - #ifndef BOARD_ST7920_DELAY_3 - #define BOARD_ST7920_DELAY_3 DELAY_NS(600) - #endif - #endif +#endif // HAS_WIRED_LCD -#endif // HAS_SPI_LCD +// Alter timing for graphical display +#if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(600) + #endif +#endif // // WIFI // /** - * _____ + * ----- * TX | 1 2 | GND Enable PG1 // Must be high for module to run * Enable | 3 4 | GPIO2 Reset PG0 // active low, probably OK to leave floating * Reset | 5 6 | GPIO0 GPIO2 PF15 // must be high (ESP3D software configures this with a pullup so OK to leave as floating) - * 3.3V| 7 8 | RX GPIO0 PF14 // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) - * ￣￣ + * 3.3V | 7 8 | RX GPIO0 PF14 // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) + * ----- * W1 */ #define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index a6d7f8a495..151f6c3bc0 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -199,7 +199,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC9 #define BTN_ENC PA8 @@ -261,7 +261,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -273,7 +273,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef RGB_LED_R_PIN #define RGB_LED_R_PIN PB6 diff --git a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h index ae469365a9..4acfd743b7 100644 --- a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h +++ b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h @@ -184,7 +184,7 @@ // // ST7920 Delays // -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index 338fda1e53..f386b7690b 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -147,7 +147,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BTN_EN1 PB2 #define BTN_EN2 PB1 @@ -169,7 +169,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h index 6c826b068d..e2463fd47e 100644 --- a/Marlin/src/pins/stm32f4/pins_VAKE403D.h +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -165,7 +165,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(SDSUPPORT) #define SDSS PB6 // CS for SD card in LCD #endif diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index 3fb8c7f259..6ffd35dff2 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -201,7 +201,7 @@ // //#define USE_INTERNAL_SD -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 9 // E1 JP11-11 #define LCD_PINS_ENABLE 8 // E0 JP11-10 #define LCD_PINS_D4 7 // D7 JP11-8 diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index b98c78fde1..45d1231f8e 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -98,7 +98,7 @@ // /* -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 41 #define LCD_PINS_D4 42 diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 961dc0cff0..b1cd3d1612 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -130,7 +130,7 @@ // #define SDSS 39 // 8 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 41 #define LCD_PINS_D4 42 diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies.h b/buildroot/share/PlatformIO/scripts/common-dependencies.h index bc745733d1..02a4502e3f 100644 --- a/buildroot/share/PlatformIO/scripts/common-dependencies.h +++ b/buildroot/share/PlatformIO/scripts/common-dependencies.h @@ -73,7 +73,7 @@ // Feature checks for SR_LCD_3W_NL #elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) #define USES_LIQUIDTWI2 -#elif ANY(HAS_CHARACTER_LCD, LCD_I2C_TYPE_PCF8575, LCD_I2C_TYPE_PCA8574, SR_LCD_2W_NL, LCM1602) +#elif ANY(HAS_MARLINUI_HD44780, LCD_I2C_TYPE_PCF8575, LCD_I2C_TYPE_PCA8574, SR_LCD_2W_NL, LCM1602) #define USES_LIQUIDCRYSTAL #endif diff --git a/platformio.ini b/platformio.ini index 75c64504ca..ff3c0fb810 100644 --- a/platformio.ini +++ b/platformio.ini @@ -208,13 +208,14 @@ HAS_L64XX = Arduino-L6470@0.8.0 NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 src_filter=+ MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 -HAS_GRAPHICAL_LCD = U8glib-HAL@~0.4.1 - src_filter=+ USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7 -DWIN_CREALITY_LCD = src_filter=+ -HAS_CHARACTER_LCD = src_filter=+ +HAS_WIRED_LCD = src_filter=+ +HAS_MARLINUI_HD44780 = src_filter=+ +HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1 + src_filter=+ HAS_GRAPHICAL_TFT = src_filter=+ +DWIN_CREALITY_LCD = src_filter=+ HAS_LCD_MENU = src_filter=+ HAS_GAMES = src_filter=+ MARLIN_BRICKOUT = src_filter=+ @@ -246,7 +247,6 @@ HAS_DGUS_LCD = src_filter=+ + EXTUI_EXAMPLE = src_filter=+ MALYAN_LCD = src_filter=+ -HAS_SPI_LCD = src_filter=+ USB_FLASH_DRIVE_SUPPORT = src_filter=+ AUTO_BED_LEVELING_BILINEAR = src_filter=+ AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+