Add BEZIER_JERK_CONTROL to example configs

Marlin/src/config/default/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h

@@ -628,6 +628,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                 10.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/AliExpress/CL-260/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Anet/A6/Configuration.h

@@ -656,6 +656,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Anet/A8/Configuration.h

@@ -615,6 +615,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Azteeg/X5GT/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h

@@ -608,6 +608,17 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define DEFAULT_ZJERK                  0.65
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h

@@ -608,6 +608,17 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo
 #define DEFAULT_ZJERK                  0.65
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/BQ/Hephestos/Configuration.h

@@ -596,6 +596,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h

@@ -609,6 +609,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  1.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/BQ/WITBOX/Configuration.h

@@ -596,6 +596,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Cartesio/Configuration.h

@@ -607,6 +607,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Creality/CR-10/Configuration.h

@@ -618,6 +618,17 @@
 #define DEFAULT_ZJERK                  2.7
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Creality/CR-10S/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Creality/CR-10mini/Configuration.h

@@ -627,6 +627,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Creality/CR-8/Configuration.h

@@ -618,6 +618,17 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Creality/Ender-2/Configuration.h

@@ -612,6 +612,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Creality/Ender-4/Configuration.h

@@ -618,6 +618,17 @@
 #define DEFAULT_ZJERK                  2.4
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Felix/Configuration.h

@@ -590,6 +590,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Felix/DUAL/Configuration.h

@@ -590,6 +590,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h

@@ -614,6 +614,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  4.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Geeetech/GT2560/Configuration.h

@@ -623,6 +623,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  4.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -623,6 +623,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -623,6 +623,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Infitary/i3-M508/Configuration.h

@@ -612,6 +612,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/JGAurora/A5/Configuration.h

@@ -620,6 +620,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/MakerParts/Configuration.h

@@ -628,6 +628,17 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  8.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Malyan/M150/Configuration.h

@@ -628,6 +628,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Malyan/M200/Configuration.h

@@ -607,6 +607,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Micromake/C1/basic/Configuration.h

@@ -612,6 +612,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h

@@ -612,6 +612,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Mks/Sbase/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/RigidBot/Configuration.h

@@ -606,6 +606,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/SCARA/Configuration.h

@@ -621,6 +621,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  3.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/STM32F10/Configuration.h

@@ -611,6 +611,17 @@
 #define DEFAULT_EJERK                  5.0
 
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Sanguinololu/Configuration.h

@@ -639,6 +639,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/TheBorg/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/TinyBoy2/Configuration.h

@@ -659,6 +659,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Tronxy/X1/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Tronxy/X5S/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Tronxy/XY100/Configuration.h

@@ -619,6 +619,17 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Velleman/K8200/Configuration.h

@@ -637,6 +637,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Velleman/K8400/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.5
 #define DEFAULT_EJERK                 20.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                 20.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h

@@ -618,6 +618,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  1.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/adafruit/ST7565/Configuration.h

@@ -608,6 +608,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h

@@ -688,6 +688,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h

@@ -688,6 +688,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h

@@ -688,6 +688,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h

@@ -693,6 +693,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/generic/Configuration.h

@@ -678,6 +678,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/kossel_mini/Configuration.h

@@ -678,6 +678,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/kossel_pro/Configuration.h

@@ -671,6 +671,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/delta/kossel_xl/Configuration.h

@@ -690,6 +690,17 @@
 #define DEFAULT_ZJERK                 DEFAULT_XJERK // Must be same as XY for delta
 #define DEFAULT_EJERK                 20.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h

@@ -621,6 +621,17 @@
 #define DEFAULT_ZJERK                  0.7
 #define DEFAULT_EJERK                  4.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/makibox/Configuration.h

@@ -611,6 +611,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/stm32f103ret6/Configuration.h

@@ -610,6 +610,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/tvrrug/Round2/Configuration.h

@@ -603,6 +603,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================

Marlin/src/config/examples/wt150/Configuration.h

@@ -613,6 +613,17 @@
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================