zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

🩺 Assert FAN_SOFT_PWM where required (#23383, #23477)

Browse source
This commit is contained in:
Scott Lahteine 2021-12-29 04:17:41 -06:00 committed by Scott Lahteine
parent 1552c6d2a5
commit 5a9635aa58
19 changed files with 50 additions and 35 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

6
Marlin/src/inc/SanityCheck.h
View file

@ -1995,8 +1995,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
#endif
#endif
#if HAS_FAN0 && CONTROLLER_FAN_PIN == FAN_PIN
#if HAS_FAN0
#if CONTROLLER_FAN_PIN == FAN_PIN
#error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN."
#elif ENABLED(FAN_SOFT_PWM_REQUIRED) && DISABLED(FAN_SOFT_PWM)
#error "FAN_SOFT_PWM is required. Enable it to continue."
#endif
#endif
#if ENABLED(USE_CONTROLLER_FAN)

2
Marlin/src/pins/mega/pins_MEGACONTROLLER.h
View file

@ -121,7 +121,7 @@
#define CONTROLLER_FAN_PIN FAN2_PIN
#endif
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Misc. Functions

2
Marlin/src/pins/stm32f1/pins_BEAST.h
View file

@ -93,7 +93,7 @@
#define FAN_PIN PB10
#endif
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Temperature Sensors

2
Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h
View file

@ -113,7 +113,7 @@
#define HEATER_BED_PIN PC9 // HOT BED
#define FAN_PIN PC6 // FAN
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
#define CONTROLLER_FAN_PIN PC7

2
Marlin/src/pins/stm32f1/pins_CHITU3D.h
View file

@ -87,7 +87,7 @@
#define FAN_PIN PG14 // MAIN BOARD FAN
#endif
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Temperature Sensors

4
Marlin/src/pins/stm32f1/pins_CREALITY_V4.h
View file

@ -143,9 +143,7 @@
#ifndef FAN_PIN
#define FAN_PIN PA0 // FAN
#endif
#if PIN_EXISTS(FAN)
#define FAN_SOFT_PWM
#endif
#define FAN_SOFT_PWM_REQUIRED
//
// SD Card

2
Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h
View file

@ -144,7 +144,7 @@
#define HEATER_BED_PIN PA1 // HOT BED
#define FAN_PIN PA2 // FAN
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// SD Card

2
Marlin/src/pins/stm32f1/pins_CREALITY_V45x.h
View file

@ -97,7 +97,7 @@
// Heaters / Fans
//
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// SD Card

7
Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h
View file

@ -38,10 +38,9 @@
//#define DISABLE_DEBUG
#define DISABLE_JTAG
//#define ENABLE_SPI3
#define FLASH_EEPROM_EMULATION
#define FAN_SOFT_PWM
#if ENABLED(FLASH_EEPROM_EMULATION)
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
#define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE)
@ -118,6 +117,8 @@
#endif
#endif
#define FAN_SOFT_PWM_REQUIRED
//
// Misc. Functions
//

10
Marlin/src/pins/stm32f1/pins_FLY_MINI.h
View file

@ -30,10 +30,12 @@
//
// Flash EEPROM Emulation
//
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE 0x800 // 2KB
#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#if EITHER(NO_EEPROM_SELECTED, FLASH_EEPROM_EMULATION)
#define FLASH_EEPROM_EMULATION
#define EEPROM_PAGE_SIZE 0x800 // 2KB
#define EEPROM_START_ADDRESS (0x8000000 + 256 * 1024 - 2 * EEPROM_PAGE_SIZE) // 256K firmware space
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#endif
//
// Servos

19
Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h
View file

@ -89,14 +89,19 @@
#define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet)
#define FAN_PIN PA15 // pin 77 (4cm Fan)
#ifdef MAPLE_STM32F1
#define FAN_SOFT_PWM // Required to avoid issues with heating or STLink
#define FAN_MIN_PWM 35 // Fan will not start in 1-30 range
#define FAN_MAX_PWM 255
#if TERN(MAPLE_STM32F1, ENABLED(FAN_SOFT_PWM), ENABLED(FAST_PWM_FAN)) && FAN_MIN_PWM < 5 // Required to avoid issues with heating or STLink
#error "FAN_MIN_PWM must be 5 or higher." // Fan will not start in 1-30 range
#endif
#if defined(MAPLE_STM32F1) || DISABLED(FAST_PWM_FAN) // STM32 HAL required to allow TIMER2 Hardware PWM
#define FAN_SOFT_PWM_REQUIRED
#else
#define FAST_PWM_FAN // STM32 Variant allow TIMER2 Hardware PWM
#define FAN_MIN_PWM 5
#define FAN_MAX_PWM 255
#if FAST_PWM_FAN_FREQUENCY <= 1000 // Default 1000 is noisy, max 65K (uint16)
#error "FAST_PWM_FAN_FREQUENCY must be greater than 1000."
#elif FAST_PWM_FAN_FREQUENCY > 65535
#error "FAST_PWM_FAN_FREQUENCY must be less than 65536."
#endif
#endif
//#define BEEPER_PIN PD13 // pin 60 (Servo PWM output 5V/GND on Board V0G+) made for BL-Touch sensor

2
Marlin/src/pins/stm32f1/pins_STM3R_MINI.h
View file

@ -91,7 +91,7 @@
#endif
#define FAN1_PIN PD13
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Temperature Sensors

4
Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h
View file

@ -45,7 +45,9 @@
//
// EEPROM
//
#define FLASH_EEPROM_EMULATION
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
#endif
#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)

6
Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h
View file

@ -29,8 +29,10 @@
#define BOARD_INFO_NAME "Artillery Ruby"
#define FLASH_EEPROM_EMULATION
//#define I2C_EEPROM
#if NO_EEPROM_SELECTED
#define FLASH_EEPROM_EMULATION
//#define I2C_EEPROM
#endif
//#define E2END 0xFFF // 4KB
#define HAL_TIMER_RATE F_CPU

2
Marlin/src/pins/stm32f4/pins_INDEX_REV03.h
View file

@ -119,7 +119,7 @@
#define FAN2_PIN PE4
#define FAN3_PIN PE5
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
// Neopixel Rings
#define NEOPIXEL_PIN PC7

2
Marlin/src/pins/stm32f4/pins_RUMBA32_common.h
View file

@ -35,7 +35,7 @@
// Use soft PWM for fans - PWM is not working properly when paired with STM32 Arduino Core v1.7.0
// This can be removed when Core version is updated and PWM behaviour is fixed.
#define FAN_SOFT_PWM
#define FAN_SOFT_PWM_REQUIRED
//
// Configure Timers

2
buildroot/tests/STM32F103RET6_creality
View file

@ -30,7 +30,7 @@ exec_test $1 $2 "Ender 3 v2 with MarlinUI" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_CREALITY_V452 SERIAL_PORT 1
opt_disable NOZZLE_TO_PROBE_OFFSET
opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN \
opt_enable NOZZLE_AS_PROBE Z_SAFE_HOMING Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN FAN_SOFT_PWM \
PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE
exec_test $1 $2 "Creality V4.5.2 PROBE_ACTIVATION_SWITCH, Probe Tare" "$3"

2
buildroot/tests/STM32F103RE_btt_USB
View file

@ -15,7 +15,7 @@ exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration" "$3"
restore_configs
opt_set MOTHERBOARD BOARD_BTT_SKR_CR6 SERIAL_PORT -1 SERIAL_PORT_2 2 TEMP_SENSOR_BED 1
opt_enable CR10_STOCKDISPLAY \
opt_enable CR10_STOCKDISPLAY FAN_SOFT_PWM \
NOZZLE_AS_PROBE Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN Z_SAFE_HOMING \
PROBE_ACTIVATION_SWITCH PROBE_TARE PROBE_TARE_ONLY_WHILE_INACTIVE \
PROBING_HEATERS_OFF PREHEAT_BEFORE_PROBING

5
buildroot/tests/rumba32
View file

@ -11,7 +11,7 @@ restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_V1_0 SERIAL_PORT -1 \
TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130
opt_disable PIDTEMP
opt_enable PIDTEMPBED
opt_enable PIDTEMPBED FAN_SOFT_PWM
opt_disable THERMAL_PROTECTION_BED
exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection disabled" "$3"
@ -19,12 +19,13 @@ exec_test $1 $2 "RUMBA32 V1.0 with TMC2130, PID Bed, and bed thermal protection
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_V1_1 SERIAL_PORT -1 \
TEMP_SENSOR_BED 1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
opt_enable PIDTEMPBED EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
opt_enable PIDTEMPBED FAN_SOFT_PWM EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
exec_test $1 $2 "RUMBA32 V1.1 with TMC2130, TMC2208, PID Bed, EEPROM settings, and graphic LCD controller" "$3"
# Build examples
restore_configs
opt_set MOTHERBOARD BOARD_RUMBA32_MKS SERIAL_PORT -1 X_DRIVER_TYPE TMC2130 Y_DRIVER_TYPE TMC2208
opt_enable FAN_SOFT_PWM
exec_test $1 $2 "RUMBA32 MKS Default Config with Mixed TMC Drivers" "$3"
# cleanup