Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1

Marlin/language.h

@@ -51,8 +51,6 @@
 	#define MSG_COOLDOWN "Cooldown"
 	#define MSG_EXTRUDE "Extrude"
 	#define MSG_RETRACT "Retract"
-	#define MSG_PREHEAT_PLA "Preheat PLA"
-	#define MSG_PREHEAT_ABS "Preheat ABS"
 	#define MSG_MOVE_AXIS "Move Axis"
 	#define MSG_SPEED "Speed"
 	#define MSG_NOZZLE "Nozzle"
@@ -814,7 +812,7 @@
 #if LANGUAGE_CHOICE == 6
 
 // LCD Menu Messages
-#define WELCOME_MSG MACHINE_NAME			" Готов."
+#define WELCOME_MSG MACHINE_NAME			" Готов"
 #define MSG_SD_INSERTED						"Карта вставлена"
 #define MSG_SD_REMOVED						"Карта извлечена"
 #define MSG_MAIN							" Меню              \003"
@@ -863,21 +861,16 @@
 #define MSG_YSTEPS							" Y шаг/mm:"
 #define MSG_ZSTEPS							" Z шаг/mm:"
 #define MSG_ESTEPS							" E шаг/mm:"
-#define MSG_MAIN_WIDE						" Меню              \003"
-#define MSG_RECTRACT_WIDE					" Откат подачи      \x7E"
-#define MSG_TEMPERATURE_WIDE				" Температура       \x7E"
-#define MSG_TEMPERATURE_RTN					" Температура       \003"
-#define MSG_MOTION_WIDE						" Скорости          \x7E"
+#define MSG_RECTRACT    					" Откат подачи      \x7E"
+#define MSG_TEMPERATURE  				" Температура       \x7E"
+#define MSG_MOTION						" Скорости          \x7E"
 #define MSG_STORE_EPROM						" Сохранить настройки"
 #define MSG_LOAD_EPROM						" Загрузить настройки"
 #define MSG_RESTORE_FAILSAFE				" Сброс настроек     "
 #define MSG_REFRESH							"\004Обновить           "
 #define MSG_WATCH							" Обзор             \003"
 #define MSG_PREPARE							" Действия          \x7E"
-#define MSG_PREPARE_ALT						" Действия          \003"
-#define MSG_CONTROL_ARROW					" Настройки         \x7E"
-#define MSG_RETRACT_ARROW					" Настройки отката  \x7E"
-#define MSG_TUNE							" Tune              \x7E"
+#define MSG_TUNE					" Настройки         \x7E"
 #define MSG_PAUSE_PRINT						" Пауза печати      \x7E"
 #define MSG_RESUME_PRINT					" Продолжить печать \x7E"
 #define MSG_STOP_PRINT						" Остановить печать \x7E"
@@ -889,7 +882,6 @@
 #define MSG_PART_RELEASE					" Извлечение принта  "
 #define MSG_KILLED							"УБИТО. "
 #define MSG_STOPPED							"ОСТАНОВЛЕНО. "
-#define MSG_STEPPER_RELEASED				"Двигатели отключены."
 #define MSG_CONTROL_RETRACT					" Откат mm:"
 #define MSG_CONTROL_RETRACTF				" Откат  F:"
 #define MSG_CONTROL_RETRACT_ZLIFT			" Прыжок mm:"
@@ -941,7 +933,9 @@
 #define MSG_Y_MAX							"y_max:"
 #define MSG_Z_MIN							"z_min:"
 #define MSG_Z_MAX							"z_max:"
-
+#define MSG_M119_REPORT						"Статус концевиков"
+#define MSG_ENDSTOP_HIT						"Срабатывание концевика"
+#define MSG_ENDSTOP_OPEN					"Концевик освобожден"
 #define MSG_SD_CANT_OPEN_SUBDIR				"Не открыть папку"
 #define MSG_SD_INIT_FAIL					"Ошибка инициализации SD"
 #define MSG_SD_VOL_INIT_FAIL				"Ошибка инициализации раздела"
@@ -957,14 +951,10 @@
 #define MSG_SD_NOT_PRINTING					"нет SD печати"
 #define MSG_SD_ERR_WRITE_TO_FILE			"ошибка записи в файл"
 #define MSG_SD_CANT_ENTER_SUBDIR			"Не зайти в папку:"
-
 #define MSG_STEPPER_TO_HIGH					"Частота шагов очень высока : "
 #define MSG_ENDSTOPS_HIT					"концевик сработал: "
 #define MSG_ERR_COLD_EXTRUDE_STOP			" защита холодной экструзии"
 #define MSG_ERR_LONG_EXTRUDE_STOP			" защита превышения длинны экструзии"
-#define MSG_M119_REPORT						"Статус концевиков"
-#define MSG_ENDSTOP_HIT						"Срабатывание концевика"
-#define MSG_ENDSTOP_OPEN					"Концевик освобожден"
 
 #endif
 

Marlin/pins.h

@@ -709,6 +709,9 @@
 #define LED_PIN            -1
 
 #define FAN_PIN            -1 
+#if FAN_PIN == 12 || FAN_PIN ==13
+#define FAN_SOFT_PWM
+#endif
 
 #ifdef MELZI
 #define LED_PIN            28

Marlin/planner.cpp

@@ -460,10 +460,12 @@ void check_axes_activity()
   else
   {
     #if FAN_PIN > -1
+    #ifndef FAN_SOFT_PWM
     if (fanSpeed != 0){
       analogWrite(FAN_PIN,fanSpeed); // If buffer is empty use current fan speed
     }
     #endif
+	#endif
   }
   if((DISABLE_X) && (x_active == 0)) disable_x();
   if((DISABLE_Y) && (y_active == 0)) disable_y();
@@ -475,6 +477,7 @@ void check_axes_activity()
     disable_e2(); 
   }
 #if FAN_PIN > -1
+  #ifndef FAN_SOFT_PWM
   if((fanSpeed == 0) && (fan_speed ==0))
   {
     analogWrite(FAN_PIN, 0);
@@ -484,6 +487,7 @@ void check_axes_activity()
   {
     analogWrite(FAN_PIN,tail_fan_speed);
   }
+  #endif
 #endif
 #ifdef AUTOTEMP
   getHighESpeed();

Marlin/temperature.cpp

@@ -96,6 +96,11 @@ static volatile bool temp_meas_ready = false;
 #endif //PIDTEMPBED
   static unsigned char soft_pwm[EXTRUDERS];
   static unsigned char soft_pwm_bed;
+#ifdef FAN_SOFT_PWM
+  static unsigned char soft_pwm_fan;
+#endif
+
+
   
 #if EXTRUDERS > 3
 # error Unsupported number of extruders
@@ -597,6 +602,9 @@ void tp_init()
     #ifdef FAST_PWM_FAN
     setPwmFrequency(FAN_PIN, 1); // No prescaling. Pwm frequency = F_CPU/256/8
     #endif
+    #ifdef FAN_SOFT_PWM
+	soft_pwm_fan=(unsigned char)fanSpeed;
+	#endif
   #endif  
 
   #ifdef HEATER_0_USES_MAX6675
@@ -929,6 +937,10 @@ ISR(TIMER0_COMPB_vect)
     soft_pwm_b = soft_pwm_bed;
     if(soft_pwm_b > 0) WRITE(HEATER_BED_PIN,1);
     #endif
+    #ifdef FAN_SOFT_PWM
+    soft_pwm_fan =(unsigned char) fanSpeed;
+    if(soft_pwm_fan > 0) WRITE(FAN_PIN,1);
+    #endif
   }
   if(soft_pwm_0 <= pwm_count) WRITE(HEATER_0_PIN,0);
   #if EXTRUDERS > 1
@@ -940,6 +952,9 @@ ISR(TIMER0_COMPB_vect)
   #if HEATER_BED_PIN > -1
   if(soft_pwm_b <= pwm_count) WRITE(HEATER_BED_PIN,0);
   #endif
+  #ifdef FAN_SOFT_PWM
+  if(soft_pwm_fan <= pwm_count) WRITE(FAN_PIN,0);
+  #endif
   
   pwm_count++;
   pwm_count &= 0x7f;

Marlin/ultralcd_implementation_hitachi_HD44780.h

@@ -25,7 +25,7 @@
 #define LCD_STR_CLOCK       "\x07"
 #define LCD_STR_ARROW_RIGHT "\x7E"  /* from the default character set */
 
-LiquidCrystal lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7);  //RS,Enable,D4,D5,D6,D7
+LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7);  //RS,Enable,D4,D5,D6,D7
 static void lcd_implementation_init()
 {
     byte bedTemp[8] =