zaubentrucker/muele-marlin
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity

Fix M217 report label, general cleanup

Browse source
This commit is contained in:
Scott Lahteine 2019-04-08 18:17:14 -05:00
parent fae2b7edc3
commit 5e38d70697
3 changed files with 5 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

2
Marlin/src/gcode/config/M217.cpp
View file

@ -30,7 +30,7 @@
void M217_report(const bool eeprom=false) { void M217_report(const bool eeprom=false) {
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP) #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Singlenozzle:")); serialprintPGM(eeprom ? PSTR(" M217") : PSTR("Toolchange:"));
SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length)); SERIAL_ECHOPAIR(" S", LINEAR_UNIT(toolchange_settings.swap_length));
SERIAL_ECHOPAIR(" P", LINEAR_UNIT(toolchange_settings.prime_speed)); SERIAL_ECHOPAIR(" P", LINEAR_UNIT(toolchange_settings.prime_speed));
SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed)); SERIAL_ECHOPAIR(" R", LINEAR_UNIT(toolchange_settings.retract_speed));

8
config/examples/BQ/Hephestos_2/Configuration.h
View file

@ -903,12 +903,12 @@
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
*/ */
#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow
#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
//#define Z_AFTER_PROBING 5 // Z position after probing is done //#define Z_AFTER_PROBING 5 // Z position after probing is done
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
// For M851 give a range for adjusting the Z probe offset // For M851 give a range for adjusting the Z probe offset
#define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MIN -20

3
config/examples/delta/Geeetech/Rostock 301/Configuration.h
View file

@ -1116,9 +1116,6 @@
#define Y_MAX_POS DELTA_PRINTABLE_RADIUS #define Y_MAX_POS DELTA_PRINTABLE_RADIUS
#define Z_MAX_POS MANUAL_Z_HOME_POS #define Z_MAX_POS MANUAL_Z_HOME_POS
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
/** /**
* Software Endstops * Software Endstops
* *