Merge pull request #1465 from CONSULitAS/Development_K8200_de

K8200: Example Configurations back in sync and readme update

Marlin/example_configurations/K8200/Configuration.h

@@ -1,6 +1,6 @@
-#ifndef CONFIGURATION_H
+#ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-
+
 #include "boards.h"
 
 
@@ -521,7 +521,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 // default settings
 
-#define DEFAULT_AXIS_STEPS_PER_UNIT   {64.25,64.25,2560,600}  // default steps per unit for Ultimaker
+#define DEFAULT_AXIS_STEPS_PER_UNIT   {64.25,64.25,2560,600}  // default steps per unit for K8200
 #define DEFAULT_MAX_FEEDRATE          {500, 500, 5, 500}    // (mm/sec)
 #define DEFAULT_MAX_ACCELERATION      {9000,9000,100,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
 
@@ -575,6 +575,8 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 //LCD and SD support
 
+// VM8201 (LCD Option for K8200) uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"
+
 // Character based displays can have different extended charsets.
 #define DISPLAY_CHARSET_HD44780_JAPAN     // "ääööüüß23°"
 //#define DISPLAY_CHARSET_HD44780_WESTERN // "ÄäÖöÜüß²³°" if you see a '~' instead of a 'arrow_right' at the right of submenuitems - this is the right one.
@@ -586,9 +588,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 //#define SD_CHECK_AND_RETRY // Use CRC checks and retries on the SD communication
 //#define ENCODER_PULSES_PER_STEP 1 // Increase if you have a high resolution encoder
 //#define ENCODER_STEPS_PER_MENU_ITEM 5 // Set according to ENCODER_PULSES_PER_STEP or your liking
-
 #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
-
 //#define ULTIPANEL  //the UltiPanel as on Thingiverse
 //#define LCD_FEEDBACK_FREQUENCY_HZ 1000	// this is the tone frequency the buzzer plays when on UI feedback. ie Screen Click
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 // the duration the buzzer plays the UI feedback sound. ie Screen Click

Marlin/example_configurations/K8200/Configuration_adv.h

@@ -75,9 +75,10 @@
 // extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE.
 // Multiple extruders can be assigned to the same pin in which case
 // the fan will turn on when any selected extruder is above the threshold.
-#define EXTRUDER_0_AUTO_FAN_PIN   -1
+#define EXTRUDER_0_AUTO_FAN_PIN -1
-#define EXTRUDER_1_AUTO_FAN_PIN   -1
+#define EXTRUDER_1_AUTO_FAN_PIN -1
-#define EXTRUDER_2_AUTO_FAN_PIN   -1
+#define EXTRUDER_2_AUTO_FAN_PIN -1
+#define EXTRUDER_3_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -483,6 +484,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
   #define THERMISTORHEATER_2 TEMP_SENSOR_2
   #define HEATER_2_USES_THERMISTOR
 #endif
+#if TEMP_SENSOR_3 > 0
+  #define THERMISTORHEATER_3 TEMP_SENSOR_3
+  #define HEATER_3_USES_THERMISTOR
+#endif
 #if TEMP_SENSOR_BED > 0
   #define THERMISTORBED TEMP_SENSOR_BED
   #define BED_USES_THERMISTOR
@@ -496,6 +501,9 @@ const unsigned int dropsegments=5; //everything with less than this number of st
 #if TEMP_SENSOR_2 == -1
   #define HEATER_2_USES_AD595
 #endif
+#if TEMP_SENSOR_3 == -1
+  #define HEATER_3_USES_AD595
+#endif
 #if TEMP_SENSOR_BED == -1
   #define BED_USES_AD595
 #endif
@@ -514,6 +522,10 @@ const unsigned int dropsegments=5; //everything with less than this number of st
   #undef HEATER_2_MINTEMP
   #undef HEATER_2_MAXTEMP
 #endif
+#if TEMP_SENSOR_3 == 0
+  #undef HEATER_3_MINTEMP
+  #undef HEATER_3_MAXTEMP
+#endif
 #if TEMP_SENSOR_BED == 0
   #undef BED_MINTEMP
   #undef BED_MAXTEMP

Marlin/example_configurations/K8200/readme.md

@@ -1,9 +1,12 @@
 # Example Configuration for Vellemann K8200
-* Configuration files for **Vellemann K8200** (with VM8201 LCD/SD-Support)
+* Configuration files for **Vellemann K8200** (with VM8201 - LCD Option for K8200)
 * K8200 is a 3Drag clone - configuration should work with 3Drag http://reprap.org/wiki/3drag, too. Please report.
 
 * updated manually with parameters form genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch
 
+* VM8201 uses "DISPLAY_CHARSET_HD44870_JAPAN" and "ULTIMAKERCONTROLLER"
+* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support
+
 I (@CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.0.5 for Windows (SD library added to IDE manually) - everything works well.
 
 **Source for genuine Vellemann Firmware V2 (with LCD/SD-Support):**