Update Japanese translation
This commit is contained in:
esenapaj
Scott Lahteine
parent
cadded1e21
commit
665338bb69
|
|
@ -17,12 +17,12 @@
|
|||
// 片仮名表示定義
|
||||
#define WELCOME_MSG MACHINE_NAME " ready."
|
||||
#define MSG_SD_INSERTED "\xb6\xb0\xc4\xde\x20\xbf\xb3\xc6\xad\xb3\xbb\xda\xcf\xbc\xc0" // "Card inserted"
|
||||
#define MSG_SD_REMOVED "\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "Card removed"
|
||||
#define MSG_SD_REMOVED "\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "Card removed"
|
||||
#define MSG_MAIN "\xd2\xb2\xdd" // "Main"
|
||||
#define MSG_AUTOSTART "\xbc\xde\xc4\xde\xb3\xb6\xb2\xbc" // "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "\xd3\xb0\xc0\xb0\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "Disable steppers"
|
||||
#define MSG_AUTO_HOME "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3" // "Auto home"
|
||||
#define MSG_LEVEL_BED_HOMING "Homing"
|
||||
#define MSG_LEVEL_BED_HOMING "\xb9\xde\xdd\xc3\xdd\xc6\xb2\xc4\xde\xb3" // "Homing"
|
||||
#define MSG_SET_HOME_OFFSETS "\xb7\xbc\xde\xad\xdd\xb5\xcc\xbe\xaf\xc4\xbe\xaf\xc3\xb2" // "Set home offsets"
|
||||
#define MSG_SET_ORIGIN "\xb7\xbc\xde\xad\xdd\xbe\xaf\xc4" // "Set origin"
|
||||
#define MSG_PREHEAT_PLA "PLA \xd6\xc8\xc2" // "Preheat PLA"
|
||||
|
|
@ -39,8 +39,9 @@
|
|||
#define MSG_SWITCH_PS_ON "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xdd" // "Switch power on"
|
||||
#define MSG_SWITCH_PS_OFF "\xc3\xde\xdd\xb9\xde\xdd\x20\xb5\xcc" // "Switch power off"
|
||||
#define MSG_EXTRUDE "\xb5\xbc\xc0\xde\xbc" // "Extrude"
|
||||
#define MSG_RETRACT "\xd8\xc4\xd7\xb8\xc4" // "Retract"
|
||||
#define MSG_RETRACT "\xcb\xb7\xba\xd0\xbe\xaf\xc3\xb2" // "Retract"
|
||||
#define MSG_MOVE_AXIS "\xbc\xde\xb8\xb2\xc4\xde\xb3" // "Move axis"
|
||||
#define MSG_LEVEL_BED "\xcd\xde\xaf\xc4\xde\xda\xcd\xde\xd8\xdd\xb8\xde" // "Level bed"
|
||||
#define MSG_MOVE_X "X\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Move X"
|
||||
#define MSG_MOVE_Y "Y\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Move Y"
|
||||
#define MSG_MOVE_Z "Z\xbc\xde\xb8\x20\xb2\xc4\xde\xb3" // "Move Z"
|
||||
|
|
@ -54,94 +55,97 @@
|
|||
#define MSG_FAN_SPEED "\xcc\xa7\xdd\xbf\xb8\xc4\xde" // "Fan speed"
|
||||
#define MSG_FLOW "\xb5\xb8\xd8\xd8\xae\xb3" // "Flow"
|
||||
#define MSG_CONTROL "\xba\xdd\xc4\xdb\xb0\xd9" // "Control"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " \xbb\xb2\xc3\xb2" // " Min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " \xbb\xb2\xba\xb3" // " Max"
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER " \xcc\xa7\xb8\xc0\xb0" // " Fact"
|
||||
#define MSG_AUTOTEMP "\xbc\xde\xc4\xde\xb3\xb5\xdd\xc4\xde" // "Autotemp"
|
||||
#define MSG_ON "On "
|
||||
#define MSG_OFF "Off"
|
||||
#define MSG_ON "\xb5\xdd " // "On "
|
||||
#define MSG_OFF "\xb5\xcc " // "Off"
|
||||
#define MSG_PID_P "PID-P"
|
||||
#define MSG_PID_I "PID-I"
|
||||
#define MSG_PID_D "PID-D"
|
||||
#define MSG_PID_C "PID-C"
|
||||
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde" // "Accel"
|
||||
#define MSG_VXY_JERK "Vxy-jerk"
|
||||
#define MSG_VZ_JERK "Vz-jerk"
|
||||
#define MSG_VE_JERK "Ve-jerk"
|
||||
#define MSG_VMAX "Vmax "
|
||||
#define MSG_X "x"
|
||||
#define MSG_Y "y"
|
||||
#define MSG_Z "z"
|
||||
#define MSG_E "e"
|
||||
#define MSG_VMIN "Vmin"
|
||||
#define MSG_VTRAV_MIN "VTrav min"
|
||||
#define MSG_AMAX "Amax "
|
||||
#define MSG_A_RETRACT "A-retract"
|
||||
#define MSG_ACC "\xb6\xbf\xb8\xc4\xde mm/s^2" // "Accel"
|
||||
#define MSG_VXY_JERK "XY\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Vxy-jerk"
|
||||
#define MSG_VZ_JERK "Z\xbc\xde\xb8\x20\xd4\xb8\xc4\xde mm/s" // "Vz-jerk"
|
||||
#define MSG_VE_JERK "\xb4\xb8\xbd\xc4\xd9\xb0\xc0\xde\xb0\x20\xd4\xb8\xc4\xde" // "Ve-jerk"
|
||||
#define MSG_VMAX "\xbb\xb2\xc0\xde\xb2\xcc\xa8\xb0\xc4\xde\xda\xb0\xc4 " // "Vmax "
|
||||
#define MSG_X "X" // "x"
|
||||
#define MSG_Y "Y" // "y"
|
||||
#define MSG_Z "Z" // "z"
|
||||
#define MSG_E "E" // "e"
|
||||
#define MSG_VMIN "\xbb\xb2\xbc\xae\xb3\xcc\xa8\xb0\xc4\xde\xda\xb0\xc4" // "Vmin"
|
||||
#define MSG_VTRAV_MIN "\xbb\xb2\xbc\xae\xb3\xc4\xd7\xcd\xde\xd9\xda\xb0\xc4" // "VTrav min"
|
||||
#define MSG_AMAX "\xbb\xb2\xc0\xde\xb2\xb6\xbf\xb8\xc4\xde " // "Amax "
|
||||
#define MSG_A_RETRACT "\xcb\xb7\xba\xd0\xb6\xbf\xb8\xc4\xde" // "A-retract"
|
||||
#define MSG_A_TRAVEL "\xc4\xd7\xcd\xde\xd9\xb6\xbf\xb8\xc4\xde" // "A-travel"
|
||||
#define MSG_XSTEPS "Xsteps/mm"
|
||||
#define MSG_YSTEPS "Ysteps/mm"
|
||||
#define MSG_ZSTEPS "Zsteps/mm"
|
||||
#define MSG_ESTEPS "Esteps/mm"
|
||||
#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "Temperature"
|
||||
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "Motion"
|
||||
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "Filament"
|
||||
#define MSG_TEMPERATURE "\xb5\xdd\xc4\xde" // "Temperature"
|
||||
#define MSG_MOTION "\xb3\xba\xde\xb7\xbe\xaf\xc3\xb2" // "Motion"
|
||||
#define MSG_VOLUMETRIC "\xcc\xa8\xd7\xd2\xdd\xc4" // "Filament"
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
||||
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
||||
#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCD contrast"
|
||||
#define MSG_STORE_EPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "Store memory"
|
||||
#define MSG_FILAMENT_DIAM "\xcc\xa8\xd7\xd2\xdd\xc4\xc1\xae\xaf\xb9\xb2" // "Fil. Dia."
|
||||
#define MSG_CONTRAST "LCD\xba\xdd\xc4\xd7\xbd\xc4" // "LCD contrast"
|
||||
#define MSG_STORE_EPROM "\xd2\xd3\xd8\xcd\xb6\xb8\xc9\xb3" // "Store memory"
|
||||
#define MSG_LOAD_EPROM "\xd2\xd3\xd8\xb6\xd7\xd6\xd0\xba\xd0" // "Load memory"
|
||||
#define MSG_RESTORE_FAILSAFE "\xbe\xaf\xc3\xb2\xd8\xbe\xaf\xc4" // "Restore failsafe"
|
||||
#define MSG_REFRESH "\xd8\xcc\xda\xaf\xbc\xad" // "Refresh"
|
||||
#define MSG_WATCH "\xb2\xdd\xcc\xab" // "Info screen"
|
||||
#define MSG_PREPARE "\xbc\xde\xad\xdd\xcb\xde\xbe\xaf\xc3\xb2" // "Prepare"
|
||||
#define MSG_TUNE "\xc1\xae\xb3\xbe\xb2" // "Tune"
|
||||
#define MSG_PAUSE_PRINT "\xb2\xc1\xbc\xde\xc3\xb2\xbc" // "Pause print"
|
||||
#define MSG_RESUME_PRINT "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "Resume print"
|
||||
#define MSG_STOP_PRINT "\xcc\xdf\xd8\xdd\xc4\xc3\xb2\xbc" // "Stop print"
|
||||
#define MSG_CARD_MENU "SD\xb6\xb0\xc4\xde\xb6\xd7\xcc\xdf\xd8\xdd\xc4" // "Print from SD"
|
||||
#define MSG_NO_CARD "SD\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "No SD card"
|
||||
#define MSG_DWELL "\xbd\xd8\xb0\xcc\xdf" // "Sleep..."
|
||||
#define MSG_USERWAIT "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "Wait for user..."
|
||||
#define MSG_RESUMING "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "Resuming print"
|
||||
#define MSG_PRINT_ABORTED "\xcc\xdf\xd8\xdd\xc4\xc1\xad\xb3\xbc\xbb\xda\xcf\xbc\xc0" // "Print aborted"
|
||||
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "No move."
|
||||
#define MSG_KILLED "\xbc\xae\xb3\xb7\xae" // "KILLED. "
|
||||
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "STOPPED. "
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "\xcc\xa8\xd7\xd2\xdd\xc4\xba\xb3\xb6\xdd" // "Change filament"
|
||||
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "Init. SD card"
|
||||
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "Change SD card"
|
||||
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde \xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Z probe out. bed"
|
||||
#define MSG_RESTORE_FAILSAFE "\xbe\xaf\xc3\xb2\xd8\xbe\xaf\xc4" // "Restore failsafe"
|
||||
#define MSG_REFRESH "\xd8\xcc\xda\xaf\xbc\xad" // "Refresh"
|
||||
#define MSG_WATCH "\xb2\xdd\xcc\xab" // "Info screen"
|
||||
#define MSG_PREPARE "\xbc\xde\xad\xdd\xcb\xde\xbe\xaf\xc3\xb2" // "Prepare"
|
||||
#define MSG_TUNE "\xc1\xae\xb3\xbe\xb2" // "Tune"
|
||||
#define MSG_PAUSE_PRINT "\xb2\xc1\xbc\xde\xc3\xb2\xbc" // "Pause print"
|
||||
#define MSG_RESUME_PRINT "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "Resume print"
|
||||
#define MSG_STOP_PRINT "\xcc\xdf\xd8\xdd\xc4\xc3\xb2\xbc" // "Stop print"
|
||||
#define MSG_CARD_MENU "SD\xb6\xb0\xc4\xde\xb6\xd7\xcc\xdf\xd8\xdd\xc4" // "Print from SD"
|
||||
#define MSG_NO_CARD "SD\xb6\xb0\xc4\xde\xb6\xde\xb1\xd8\xcf\xbe\xdd" // "No SD card"
|
||||
#define MSG_DWELL "\xbd\xd8\xb0\xcc\xdf" // "Sleep..."
|
||||
#define MSG_USERWAIT "\xbc\xca\xde\xd7\xb8\xb5\xcf\xc1\xb8\xc0\xde\xbb\xb2" // "Wait for user..."
|
||||
#define MSG_RESUMING "\xcc\xdf\xd8\xdd\xc4\xbb\xb2\xb6\xb2" // "Resuming print"
|
||||
#define MSG_PRINT_ABORTED "\xcc\xdf\xd8\xdd\xc4\xc1\xad\xb3\xbc\xbb\xda\xcf\xbc\xc0" // "Print aborted"
|
||||
#define MSG_NO_MOVE "\xb3\xba\xde\xb7\xcf\xbe\xdd" // "No move."
|
||||
#define MSG_KILLED "\xcb\xbc\xde\xae\xb3\xc3\xb2\xbc" // "KILLED. "
|
||||
#define MSG_STOPPED "\xc3\xb2\xbc\xbc\xcf\xbc\xc0" // "STOPPED. "
|
||||
#define MSG_CONTROL_RETRACT "\xcb\xb7\xba\xd0\xd8\xae\xb3 mm" // "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "\xcb\xb7\xba\xd0\xd8\xae\xb3S mm" // "Swap Re.mm"
|
||||
#define MSG_CONTROL_RETRACTF "\xcb\xb7\xba\xd0\xda\xb0\xc4 mm/s" // "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "\xc9\xbd\xde\xd9\xc0\xb2\xcb mm" // "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "\xd8\xb6\xca\xde\xb0 +mm" // "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "\xd8\xb6\xca\xde\xb0S +mm" // "S UnRet+mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "\xd8\xb6\xca\xde\xb0\xda\xb0\xc4 mm/s" // "UnRet V"
|
||||
#define MSG_AUTORETRACT "\xbc\xde\xc4\xde\xb3\xcb\xb7\xba\xd0" // "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "\xcc\xa8\xd7\xd2\xdd\xc4\xba\xb3\xb6\xdd" // "Change filament"
|
||||
#define MSG_INIT_SDCARD "SD\xb6\xb0\xc4\xde\xbb\xb2\xd6\xd0\xba\xd0" // "Init. SD card"
|
||||
#define MSG_CNG_SDCARD "SD\xb6\xb0\xc4\xde\xba\xb3\xb6\xdd" // "Change SD card"
|
||||
#define MSG_ZPROBE_OUT "Z\xcc\xdf\xdb\xb0\xcc\xde\x20\xcd\xde\xaf\xc4\xde\xb6\xde\xb2" // "Z probe out. bed"
|
||||
#define MSG_POSITION_UNKNOWN "\xb9\xde\xdd\xc3\xdd\xcaXY\xb2\xc4\xde\xb3\xba\xdeZ" // "Home X/Y before Z"
|
||||
#define MSG_ZPROBE_ZOFFSET "Z\xb5\xcc\xbe\xaf\xc4" // "Z Offset"
|
||||
#define MSG_BABYSTEP_X "\xcb\xde\xc4\xde\xb3 X" // "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "\xcb\xde\xc4\xde\xb3 Y" // "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "\xcb\xde\xc4\xde\xb3 Z" // "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||
#define MSG_END_HOUR "hours"
|
||||
#define MSG_END_MINUTE "minutes"
|
||||
|
||||
/* These are from language.h. PLEASE DON'T TRANSLATE! All translatable messages can be found in language_en.h
|
||||
#define MSG_HEATING "\xb6\xc8\xc2\xc1\xad\xb3..." // "Heating..."
|
||||
#define MSG_HEATING_COMPLETE "\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "Heating done."
|
||||
#define MSG_BED_HEATING "\xcd\xde\xaf\xc4\xde\xb6\xc8\xc2\xc1\xad\xb3" // "Bed Heating."
|
||||
#define MSG_BED_DONE "\xcd\xde\xaf\xc4\xde\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "Bed done."
|
||||
#define MSG_ENDSTOPS_HIT "endstops hit: "
|
||||
^ typho
|
||||
*/
|
||||
#define MSG_ZPROBE_ZOFFSET "Z\xb5\xcc\xbe\xaf\xc4" // "Z Offset"
|
||||
#define MSG_BABYSTEP_X "X\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "Y\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "Z\xbc\xde\xb8\x20\xcb\xde\xc4\xde\xb3" // "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "\xb4\xdd\xc4\xde\xbd\xc4\xaf\xcc\xdf\x20\xbb\xc4\xde\xb3" // "Endstop abort"
|
||||
#define MSG_HEATING_FAILED_LCD "\xb6\xc8\xc2\xbc\xaf\xca\xde\xb2" // "Heating failed"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "\xb4\xd7\xb0:\xbc\xde\xae\xb3\xc1\xae\xb3\xbb\xb0\xd0\xbd\xc0\xb0\xb7\xc9\xb3" // "Err: REDUNDANT TEMP ERROR"
|
||||
#define MSG_THERMAL_RUNAWAY "\xc8\xc2\xce\xde\xb3\xbf\xb3" // "THERMAL RUNAWAY"
|
||||
#define MSG_ERR_MAXTEMP "\xb4\xd7\xb0:\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "Err: MAXTEMP"
|
||||
#define MSG_ERR_MINTEMP "\xb4\xd7\xb0:\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "Err: MINTEMP"
|
||||
#define MSG_ERR_MAXTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xba\xb3\xb5\xdd\xc1\xae\xb3\xb6" // "Err: MAXTEMP BED"
|
||||
#define MSG_ERR_MINTEMP_BED "\xb4\xd7\xb0:\xcd\xde\xaf\xc4\xde\x20\xbb\xb2\xc3\xb2\xb5\xdd\xd0\xcf\xdd" // "Err: MINTEMP BED"
|
||||
#define MSG_END_HOUR "\xbc\xde\xb6\xdd" // "hours"
|
||||
#define MSG_END_MINUTE "\xcc\xdd" // "minutes"
|
||||
#define MSG_HEATING "\xb6\xc8\xc2\xc1\xad\xb3" // "Heating..."
|
||||
#define MSG_HEATING_COMPLETE "\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "Heating done."
|
||||
#define MSG_BED_HEATING "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xc1\xad\xb3" // "Bed Heating."
|
||||
#define MSG_BED_DONE "\xcd\xde\xaf\xc4\xde\x20\xb6\xc8\xc2\xb6\xdd\xd8\xae\xb3" // "Bed done."
|
||||
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU)
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#define MSG_DELTA_CALIBRATE "\xc3\xde\xd9\xc0\x20\xba\xb3\xbe\xb2" // "Delta Calibration"
|
||||
#define MSG_DELTA_CALIBRATE_X "X\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Calibrate X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Y\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Calibrate Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Z\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Calibrate Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "\xc1\xad\xb3\xbc\xdd\x20\xba\xb3\xbe\xb2" // "Calibrate Center"
|
||||
#endif // DELTA_CALIBRATION_MENU
|
||||
|
||||
#endif // LANGUAGE_KANA_H
|
||||
|
|
|
|||
|
|
@ -20,83 +20,85 @@
|
|||
|
||||
// 片仮名表示定義
|
||||
#define WELCOME_MSG MACHINE_NAME " ready."
|
||||
#define MSG_SD_INSERTED "カード ソウニュウサレマシタ" // "Card inserted"
|
||||
#define MSG_SD_INSERTED "カード ソウニュウサレマシタ" // "Card inserted"
|
||||
#define MSG_SD_REMOVED "カードガアリマセン" // "Card removed"
|
||||
#define MSG_MAIN "メイン" // "Main"
|
||||
#define MSG_MAIN "メイン" // "Main"
|
||||
#define MSG_AUTOSTART "ジドウカイシ" // "Autostart"
|
||||
#define MSG_DISABLE_STEPPERS "モーターデンゲン オフ" // "Disable steppers"
|
||||
#define MSG_DISABLE_STEPPERS "モーターデンゲン オフ" // "Disable steppers"
|
||||
#define MSG_AUTO_HOME "ゲンテンニイドウ" // "Auto home"
|
||||
#define MSG_LEVEL_BED_HOMING "Homing"
|
||||
#define MSG_LEVEL_BED_HOMING "ゲンテンニイドウ" // "Homing"
|
||||
#define MSG_SET_HOME_OFFSETS "キジュンオフセットセッテイ" // "Set home offsets"
|
||||
#define MSG_SET_ORIGIN "キジュンセット" // "Set origin"
|
||||
#define MSG_PREHEAT_PLA "PLA ヨネツ" // "Preheat PLA"
|
||||
#define MSG_PREHEAT_PLA "PLA ヨネツ" // "Preheat PLA"
|
||||
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
|
||||
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベッド" // "Bed"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セッテイ" // "conf"
|
||||
#define MSG_PREHEAT_ABS "ABS ヨネツ" // "Preheat ABS"
|
||||
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " スベテ" // " All"
|
||||
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " ベッド" // "Bed"
|
||||
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " セッテイ" // "conf"
|
||||
#define MSG_PREHEAT_ABS "ABS ヨネツ" // "Preheat ABS"
|
||||
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
|
||||
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スベテ" // " All"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ベッド" // "Bed"
|
||||
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " スベテ" // " All"
|
||||
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " ベッド" // "Bed"
|
||||
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " セッテイ" // "conf"
|
||||
#define MSG_COOLDOWN "カネツテイシ" // "Cooldown"
|
||||
#define MSG_COOLDOWN "カネツテイシ" // "Cooldown"
|
||||
#define MSG_SWITCH_PS_ON "デンゲン オン" // "Switch power on"
|
||||
#define MSG_SWITCH_PS_OFF "デンゲン オフ" // "Switch power off"
|
||||
#define MSG_EXTRUDE "オシダシ" // "Extrude"
|
||||
#define MSG_RETRACT "リトラクト" // "Retract"
|
||||
#define MSG_MOVE_AXIS "ジクイドウ" // "Move axis"
|
||||
#define MSG_MOVE_X "Xジク イドウ" // "Move X"
|
||||
#define MSG_MOVE_Y "Yジク イドウ" // "Move Y"
|
||||
#define MSG_MOVE_Z "Zジク イドウ" // "Move Z"
|
||||
#define MSG_RETRACT "ヒキコミセッテイ" // "Retract"
|
||||
#define MSG_MOVE_AXIS "ジクイドウ" // "Move axis"
|
||||
#define MSG_LEVEL_BED "ベッドレベリング" // "Level bed"
|
||||
#define MSG_MOVE_X "Xジク イドウ" // "Move X"
|
||||
#define MSG_MOVE_Y "Yジク イドウ" // "Move Y"
|
||||
#define MSG_MOVE_Z "Zジク イドウ" // "Move Z"
|
||||
#define MSG_MOVE_E "エクストルーダー" // "Extruder"
|
||||
#define MSG_MOVE_01MM "0.1mm イドウ" // "Move 0.1mm"
|
||||
#define MSG_MOVE_1MM " 1mm イドウ" // "Move 1mm"
|
||||
#define MSG_MOVE_10MM " 10mm イドウ" // "Move 10mm"
|
||||
#define MSG_SPEED "スピード" // "Speed"
|
||||
#define MSG_NOZZLE "ノズル" // "Nozzle"
|
||||
#define MSG_BED "ベッド" // "Bed"
|
||||
#define MSG_BED "ベッド" // "Bed"
|
||||
#define MSG_FAN_SPEED "ファンソクド" // "Fan speed"
|
||||
#define MSG_FLOW "オクリリョウ" // "Flow"
|
||||
#define MSG_CONTROL "コントロール" // "Control"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " Min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " Max"
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER " Fact"
|
||||
#define MSG_AUTOTEMP "ジドウオンド" // "Autotemp"
|
||||
#define MSG_ON "On "
|
||||
#define MSG_OFF "Off"
|
||||
#define MSG_MIN LCD_STR_THERMOMETER " サイテイ" // " Min"
|
||||
#define MSG_MAX LCD_STR_THERMOMETER " サイコウ" // " Max"
|
||||
#define MSG_FACTOR LCD_STR_THERMOMETER " ファクター" // " Fact"
|
||||
#define MSG_AUTOTEMP "ジドウオンド" // "Autotemp"
|
||||
#define MSG_ON "オン " // "On "
|
||||
#define MSG_OFF "オフ " // "Off"
|
||||
#define MSG_PID_P "PID-P"
|
||||
#define MSG_PID_I "PID-I"
|
||||
#define MSG_PID_D "PID-D"
|
||||
#define MSG_PID_C "PID-C"
|
||||
#define MSG_ACC "カソクド" // "Accel"
|
||||
#define MSG_VXY_JERK "Vxy-jerk"
|
||||
#define MSG_VZ_JERK "Vz-jerk"
|
||||
#define MSG_VE_JERK "Ve-jerk"
|
||||
#define MSG_VMAX "Vmax "
|
||||
#define MSG_X "x"
|
||||
#define MSG_Y "y"
|
||||
#define MSG_Z "z"
|
||||
#define MSG_E "e"
|
||||
#define MSG_VMIN "Vmin"
|
||||
#define MSG_VTRAV_MIN "VTrav min"
|
||||
#define MSG_AMAX "Amax "
|
||||
#define MSG_A_RETRACT "A-retract"
|
||||
#define MSG_ACC "カソクド mm/s^2" // "Accel"
|
||||
#define MSG_VXY_JERK "XYジク ヤクド mm/s" // "Vxy-jerk"
|
||||
#define MSG_VZ_JERK "Zジク ヤクド mm/s" // "Vz-jerk"
|
||||
#define MSG_VE_JERK "エクストルーダー ヤクド" // "Ve-jerk"
|
||||
#define MSG_VMAX "サイダイフィードレート " // "Vmax "
|
||||
#define MSG_X "X" // "x"
|
||||
#define MSG_Y "Y" // "y"
|
||||
#define MSG_Z "Z" // "z"
|
||||
#define MSG_E "E" // "e"
|
||||
#define MSG_VMIN "サイショウフィードレート" // "Vmin"
|
||||
#define MSG_VTRAV_MIN "サイショウトラベルレート" // "VTrav min"
|
||||
#define MSG_AMAX "サイダイカソクド " // "Amax "
|
||||
#define MSG_A_RETRACT "ヒキコミカソクド" // "A-retract"
|
||||
#define MSG_A_TRAVEL "トラベルカソクド" // "A-travel"
|
||||
#define MSG_XSTEPS "Xsteps/mm"
|
||||
#define MSG_YSTEPS "Ysteps/mm"
|
||||
#define MSG_ZSTEPS "Zsteps/mm"
|
||||
#define MSG_ESTEPS "Esteps/mm"
|
||||
#define MSG_TEMPERATURE "オンド" // "Temperature"
|
||||
#define MSG_MOTION "ウゴキセッテイ" // "Motion"
|
||||
#define MSG_VOLUMETRIC "フィラメント" // "Filament"
|
||||
#define MSG_VOLUMETRIC "フィラメント" // "Filament"
|
||||
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
||||
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
||||
#define MSG_CONTRAST "LCDコントラスト" // "LCD contrast"
|
||||
#define MSG_STORE_EPROM "メモリヘカクノウ" // "Store memory"
|
||||
#define MSG_FILAMENT_DIAM "フィラメントチョッケイ" // "Fil. Dia."
|
||||
#define MSG_CONTRAST "LCDコントラスト" // "LCD contrast"
|
||||
#define MSG_STORE_EPROM "メモリヘカクノウ" // "Store memory"
|
||||
#define MSG_LOAD_EPROM "メモリカラヨミコミ" // "Load memory"
|
||||
#define MSG_RESTORE_FAILSAFE "セッテイリセット" // "Restore failsafe"
|
||||
#define MSG_REFRESH "リフレッシュ" // "Refresh"
|
||||
#define MSG_WATCH "インフォ" // "Info screen"
|
||||
#define MSG_PREPARE "ジュンビセッテイ" //"Prepare"
|
||||
#define MSG_PREPARE "ジュンビセッテイ" // "Prepare"
|
||||
#define MSG_TUNE "チョウセイ" // "Tune"
|
||||
#define MSG_PAUSE_PRINT "イチジテイシ" // "Pause print"
|
||||
#define MSG_RESUME_PRINT "プリントサイカイ" // "Resume print"
|
||||
|
|
@ -108,35 +110,46 @@
|
|||
#define MSG_RESUMING "プリントサイカイ" // "Resuming print"
|
||||
#define MSG_PRINT_ABORTED "プリントチュウシサレマシタ" // "Print aborted"
|
||||
#define MSG_NO_MOVE "ウゴキマセン" // "No move."
|
||||
#define MSG_KILLED "ショウキョ" // "KILLED. "
|
||||
#define MSG_KILLED "ヒジョウテイシ" // "KILLED. "
|
||||
#define MSG_STOPPED "テイシシマシタ" // "STOPPED. "
|
||||
#define MSG_CONTROL_RETRACT "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
||||
#define MSG_CONTROL_RETRACTF "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
||||
#define MSG_AUTORETRACT "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "フィラメントコウカン" // "Change filament"
|
||||
#define MSG_INIT_SDCARD "SDカードサイヨミコミ" // "Init. SD card"
|
||||
#define MSG_CNG_SDCARD "SDカードコウカン" // "Change SD card"
|
||||
#define MSG_ZPROBE_OUT "Zプローブ ベッドガイ" // "Z probe out. bed"
|
||||
#define MSG_CONTROL_RETRACT "ヒキコミリョウ mm" // "Retract mm"
|
||||
#define MSG_CONTROL_RETRACT_SWAP "ヒキコミリョウS mm" // "Swap Re.mm"
|
||||
#define MSG_CONTROL_RETRACTF "ヒキコミレート mm/s" // "Retract V"
|
||||
#define MSG_CONTROL_RETRACT_ZLIFT "ノズルタイヒ mm" // "Hop mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER "リカバー +mm" // "UnRet +mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "リカバーS +mm" // "S UnRet+mm"
|
||||
#define MSG_CONTROL_RETRACT_RECOVERF "リカバーレート mm/s" // "UnRet V"
|
||||
#define MSG_AUTORETRACT "ジドウヒキコミ" // "AutoRetr."
|
||||
#define MSG_FILAMENTCHANGE "フィラメントコウカン" // "Change filament"
|
||||
#define MSG_INIT_SDCARD "SDカードサイヨミコミ" // "Init. SD card"
|
||||
#define MSG_CNG_SDCARD "SDカードコウカン" // "Change SD card"
|
||||
#define MSG_ZPROBE_OUT "Zプローブ ベッドガイ" // "Z probe out. bed"
|
||||
#define MSG_POSITION_UNKNOWN "ゲンテンハXYイドウゴZ" // "Home X/Y before Z"
|
||||
#define MSG_ZPROBE_ZOFFSET "Zオフセット" // "Z Offset"
|
||||
#define MSG_BABYSTEP_X "ビドウ X" // "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "ビドウ Y" // "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "ビドウ Z" // "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
||||
#define MSG_END_HOUR "hours"
|
||||
#define MSG_END_MINUTE "minutes"
|
||||
#define MSG_BABYSTEP_X "Xジク ビドウ" // "Babystep X"
|
||||
#define MSG_BABYSTEP_Y "Yジク ビドウ" // "Babystep Y"
|
||||
#define MSG_BABYSTEP_Z "Zジク ビドウ" // "Babystep Z"
|
||||
#define MSG_ENDSTOP_ABORT "エンドストップ サドウ" // "Endstop abort"
|
||||
#define MSG_HEATING_FAILED_LCD "カネツシッパイ" // "Heating failed"
|
||||
#define MSG_ERR_REDUNDANT_TEMP "エラー:ジョウチョウサーミスターキノウ" // "Err: REDUNDANT TEMP ERROR"
|
||||
#define MSG_THERMAL_RUNAWAY "ネツボウソウ" // "THERMAL RUNAWAY"
|
||||
#define MSG_ERR_MAXTEMP "エラー:サイコウオンチョウカ" // "Err: MAXTEMP"
|
||||
#define MSG_ERR_MINTEMP "エラー:サイテイオンミマン" // "Err: MINTEMP"
|
||||
#define MSG_ERR_MAXTEMP_BED "エラー:ベッド サイコウオンチョウカ" // "Err: MAXTEMP BED"
|
||||
#define MSG_ERR_MINTEMP_BED "エラー:ベッド サイテイオンミマン" // "Err: MINTEMP BED"
|
||||
#define MSG_END_HOUR "ジカン" // "hours"
|
||||
#define MSG_END_MINUTE "フン" // "minutes"
|
||||
#define MSG_HEATING "カネツチュウ" // "Heating..."
|
||||
#define MSG_HEATING_COMPLETE "カネツカンリョウ" // "Heating done."
|
||||
#define MSG_BED_HEATING "ベッド カネツチュウ" // "Bed Heating."
|
||||
#define MSG_BED_DONE "ベッド カネツカンリョウ" // "Bed done."
|
||||
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU)
|
||||
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
||||
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
||||
#define MSG_DELTA_CALIBRATE "デルタ コウセイ" // "Delta Calibration"
|
||||
#define MSG_DELTA_CALIBRATE_X "Xジク コウセイ" // "Calibrate X"
|
||||
#define MSG_DELTA_CALIBRATE_Y "Yジク コウセイ" // "Calibrate Y"
|
||||
#define MSG_DELTA_CALIBRATE_Z "Zジク コウセイ" // "Calibrate Z"
|
||||
#define MSG_DELTA_CALIBRATE_CENTER "チュウシン コウセイ" // "Calibrate Center"
|
||||
#endif // DELTA_CALIBRATION_MENU
|
||||
|
||||
#endif // LANGUAGE_KANA_UTF_H
|
||||
|
|
|
|||
Loading…
Reference in a new issue