Add MANUAL_E_MOVES_RELATIVE to examples

Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Anet/A6/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Anet/A8/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Azteeg/X5GT/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60}  // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {120*60, 120*60, 18*60, 60}  // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Cartesio/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 0} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Felix/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {80*60, 80*60, 12*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/MakerParts/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Malyan/M150/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Malyan/M200/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/RigidBot/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/SCARA/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 10*60, 60}  // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Sanguinololu/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/TheBorg/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/TinyBoy2/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h

@@ -428,6 +428,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {70*60, 70*60, 15*60, 6*60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h

@@ -426,6 +426,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h

@@ -426,6 +426,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h

@@ -426,6 +426,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/generic/Configuration_adv.h

@@ -426,6 +426,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h

@@ -426,6 +426,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/kossel_pro/Configuration_adv.h

@@ -431,6 +431,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h

@@ -426,6 +426,7 @@
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE_XYZ 50*60
   #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/makibox/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 

Marlin/src/config/examples/wt150/Configuration_adv.h

@@ -425,6 +425,7 @@
 
 #if ENABLED(ULTIPANEL)
   #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
   #define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif